Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits)
  x86: make 64bit hpet_set_mapping to use ioremap too, v2
  x86: get x86_phys_bits early
  x86: max_low_pfn_mapped fix #4
  x86: change _node_to_cpumask_ptr to return const ptr
  x86: I/O APIC: remove an IRQ2-mask hack
  x86: fix numaq_tsc_disable calling
  x86, e820: remove end_user_pfn
  x86: max_low_pfn_mapped fix, #3
  x86: max_low_pfn_mapped fix, #2
  x86: max_low_pfn_mapped fix, #1
  x86_64: fix delayed signals
  x86: remove conflicting nx6325 and nx6125 quirks
  x86: Recover timer_ack lost in the merge of the NMI watchdog
  x86: I/O APIC: Never configure IRQ2
  x86: L-APIC: Always fully configure IRQ0
  x86: L-APIC: Set IRQ0 as edge-triggered
  x86: merge dwarf2 headers
  x86: use AS_CFI instead of UNWIND_INFO
  x86: use ignore macro instead of hash comment
  x86: use matching CFI_ENDPROC
  ...

109 files changed, 12725 insertions, 9085 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 77807d4769c9..55ff016e9f69 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y                := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
+extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
 
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
@@ -13,20 +13,21 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
-CFLAGS_tsc_64.o		:= $(nostackp)
+CFLAGS_tsc.o		:= $(nostackp)
 
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y			+= traps_$(BITS).o irq_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
-obj-y			+= setup_$(BITS).o i8259_$(BITS).o setup.o
+obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
+obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
+obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
-obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o setup64.o
-obj-y			+= bootflag.o e820_$(BITS).o
+obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
+obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o
-obj-$(CONFIG_X86_64)	+= bugs_64.o
-obj-y			+= tsc_$(BITS).o io_delay.o rtc.o
+obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
@@ -53,7 +54,7 @@ obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
@@ -64,7 +65,6 @@ obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
-obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
@@ -94,12 +94,13 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
-        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o
+        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
         obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
         obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
+        obj-$(CONFIG_AMD_IOMMU)		+= amd_iommu_init.o amd_iommu.o
         obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb_64.o
 
         obj-$(CONFIG_PCI_MMCONFIG)	+= mmconf-fam10h_64.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 33c5216fd3e1..f489d7a9be92 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -37,6 +37,7 @@
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
 #include <asm/smp.h>
@@ -106,21 +107,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
  */
 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
-#ifdef	CONFIG_X86_64
-
-/* rely on all ACPI tables being in the direct mapping */
-char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
-{
-	if (!phys_addr || !size)
-		return NULL;
-
-	if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
-		return __va(phys_addr);
-
-	return NULL;
-}
-
-#else
 
 /*
  * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
@@ -139,11 +125,15 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 	unsigned long base, offset, mapped_size;
 	int idx;
 
-	if (phys + size < 8 * 1024 * 1024)
+	if (!phys || !size)
+		return NULL;
+
+	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
 		return __va(phys);
 
 	offset = phys & (PAGE_SIZE - 1);
 	mapped_size = PAGE_SIZE - offset;
+	clear_fixmap(FIX_ACPI_END);
 	set_fixmap(FIX_ACPI_END, phys);
 	base = fix_to_virt(FIX_ACPI_END);
 
@@ -155,13 +145,13 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 		if (--idx < FIX_ACPI_BEGIN)
 			return NULL;	/* cannot handle this */
 		phys += PAGE_SIZE;
+		clear_fixmap(idx);
 		set_fixmap(idx, phys);
 		mapped_size += PAGE_SIZE;
 	}
 
 	return ((unsigned char *)base + offset);
 }
-#endif
 
 #ifdef CONFIG_PCI_MMCONFIG
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
@@ -338,8 +328,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
 
 #ifdef CONFIG_X86_IO_APIC
 
-struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -514,8 +502,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		extern void eisa_set_level_irq(unsigned int irq);
-
 		if (triggering == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
@@ -860,6 +846,364 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef	CONFIG_X86_IO_APIC
+#define MP_ISA_BUS		0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+static struct {
+	int apic_id;
+	int gsi_base;
+	int gsi_end;
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_ioapic_routing[i].gsi_base)
+		    && (gsi <= mp_ioapic_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+static u8 __init uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mp_config_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->mp_apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+	}
+	if (!address) {
+		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].mp_type = MP_IOAPIC;
+	mp_ioapics[idx].mp_flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].mp_apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
+	mp_ioapics[idx].mp_apicver = io_apic_get_version(idx);
+#else
+	mp_ioapics[idx].mp_apicver = 0;
+#endif
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid;
+	mp_ioapic_routing[idx].gsi_base = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid,
+	       mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr,
+	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
+
+static void assign_to_mp_irq(struct mp_config_intsrc *m,
+				    struct mp_config_intsrc *mp_irq)
+{
+	memcpy(mp_irq, m, sizeof(struct mp_config_intsrc));
+}
+
+static int mp_irq_cmp(struct mp_config_intsrc *mp_irq,
+				struct mp_config_intsrc *m)
+{
+	return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc));
+}
+
+static void save_mp_irq(struct mp_config_intsrc *m)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_cmp(&mp_irqs[i], m))
+			return;
+	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+	int ioapic;
+	int pin;
+	struct mp_config_intsrc mp_irq;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return;
+	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	mp_irq.mp_type = MP_INTSRC;
+	mp_irq.mp_irqtype = mp_INT;
+	mp_irq.mp_irqflag = (trigger << 2) | polarity;
+	mp_irq.mp_srcbus = MP_ISA_BUS;
+	mp_irq.mp_srcbusirq = bus_irq;	/* IRQ */
+	mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */
+	mp_irq.mp_dstirq = pin;	/* INTIN# */
+
+	save_mp_irq(&mp_irq);
+}
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+	int i;
+	int ioapic;
+	unsigned int dstapic;
+	struct mp_config_intsrc mp_irq;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+	/*
+	 * Fabricate the legacy ISA bus (bus #31).
+	 */
+	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+	set_bit(MP_ISA_BUS, mp_bus_not_pci);
+	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+#ifdef CONFIG_X86_ES7000
+	/*
+	 * Older generations of ES7000 have no legacy identity mappings
+	 */
+	if (es7000_plat == 1)
+		return;
+#endif
+
+	/*
+	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
+	 */
+	ioapic = mp_find_ioapic(0);
+	if (ioapic < 0)
+		return;
+	dstapic = mp_ioapics[ioapic].mp_apicid;
+
+	/*
+	 * Use the default configuration for the IRQs 0-15.  Unless
+	 * overridden by (MADT) interrupt source override entries.
+	 */
+	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++) {
+			struct mp_config_intsrc *irq = mp_irqs + idx;
+
+			/* Do we already have a mapping for this ISA IRQ? */
+			if (irq->mp_srcbus == MP_ISA_BUS
+			    && irq->mp_srcbusirq == i)
+				break;
+
+			/* Do we already have a mapping for this IOAPIC pin */
+			if (irq->mp_dstapic == dstapic &&
+			    irq->mp_dstirq == i)
+				break;
+		}
+
+		if (idx != mp_irq_entries) {
+			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+			continue;	/* IRQ already used */
+		}
+
+		mp_irq.mp_type = MP_INTSRC;
+		mp_irq.mp_irqflag = 0;	/* Conforming */
+		mp_irq.mp_srcbus = MP_ISA_BUS;
+		mp_irq.mp_dstapic = dstapic;
+		mp_irq.mp_irqtype = mp_INT;
+		mp_irq.mp_srcbusirq = i; /* Identity mapped */
+		mp_irq.mp_dstirq = i;
+
+		save_mp_irq(&mp_irq);
+	}
+}
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
+	static int pci_irq = IRQ_COMPRESSION_START;
+	/*
+	 * Mapping between Global System Interrupts, which
+	 * represent all possible interrupts, and IRQs
+	 * assigned to actual devices.
+	 */
+	static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+		return gsi;
+#endif
+
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
+		return gsi;
+
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+		return gsi;
+	}
+
+	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+#ifdef CONFIG_X86_32
+	if (ioapic_renumber_irq)
+		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+		printk(KERN_ERR "Invalid reference to IOAPIC pin "
+		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       ioapic_pin);
+		return gsi;
+	}
+	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+		return gsi;
+#endif
+	}
+
+	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
+#ifdef CONFIG_X86_32
+	/*
+	 * For GSI >= 64, use IRQ compression
+	 */
+	if ((gsi >= IRQ_COMPRESSION_START)
+	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
+		/*
+		 * For PCI devices assign IRQs in order, avoiding gaps
+		 * due to unused I/O APIC pins.
+		 */
+		int irq = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			gsi = pci_irq++;
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_gbl_FADT.sci_interrupt)
+				gsi = pci_irq++;
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
+	}
+#endif
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	return gsi;
+}
+
+int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+			u32 gsi, int triggering, int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+	struct mp_config_intsrc mp_irq;
+	int ioapic;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	/* print the entry should happen on mptable identically */
+	mp_irq.mp_type = MP_INTSRC;
+	mp_irq.mp_irqtype = mp_INT;
+	mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.mp_srcbus = number;
+	mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id;
+	mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
 /*
  * Parse IOAPIC related entries in MADT
  * returns 0 on success, < 0 on error
@@ -1009,8 +1353,6 @@ static void __init acpi_process_madt(void)
 	return;
 }
 
-#ifdef __i386__
-
 static int __init disable_acpi_irq(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -1061,6 +1403,16 @@ static int __init force_acpi_ht(const struct dmi_system_id *d)
 }
 
 /*
+ * Force ignoring BIOS IRQ0 pin2 override
+ */
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
+{
+	pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
+	acpi_skip_timer_override = 1;
+	return 0;
+}
+
+/*
  * If your system is blacklisted here, but you find that acpi=force
  * works for you, please contact acpi-devel@sourceforge.net
  */
@@ -1227,11 +1579,35 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	/*
+	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
+	 * which includes some code which overrides all temperature
+	 * trip points to 16C if the INTIN2 input of the I/O APIC
+	 * is enabled.  This input is incorrectly designated the
+	 * ISA IRQ 0 via an interrupt source override even though
+	 * it is wired to the output of the master 8259A and INTIN0
+	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * override in that cases.
+	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6125 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6325 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+		     },
+	 },
 	{}
 };
 
-#endif				/* __i386__ */
-
 /*
  * acpi_boot_table_init() and acpi_boot_init()
  *  called from setup_arch(), always.
@@ -1259,9 +1635,7 @@ int __init acpi_boot_table_init(void)
 {
 	int error;
 
-#ifdef __i386__
 	dmi_check_system(acpi_dmi_table);
-#endif
 
 	/*
 	 * If acpi_disabled, bail out
@@ -1386,6 +1760,20 @@ static int __init parse_pci(char *arg)
 }
 early_param("pci", parse_pci);
 
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+	if (acpi_disabled || acpi_noirq) {
+		printk(KERN_WARNING "MPS support code is not built-in.\n"
+		       "Using acpi=off or acpi=noirq or pci=noacpi "
+		       "may have problem\n");
+		return 1;
+	}
+#endif
+	return 0;
+}
+
 #ifdef CONFIG_X86_IO_APIC
 static int __init parse_acpi_skip_timer_override(char *arg)
 {
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 36af01f029ed..e6a4b564ccaa 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -86,7 +86,9 @@ int acpi_save_state_mem(void)
 	saved_magic = 0x12345678;
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
-	init_rsp = (unsigned long)temp_stack + 4096;
+#ifdef CONFIG_SMP
+	stack_start.sp = temp_stack + 4096;
+#endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;
 #endif /* CONFIG_64BIT */
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
new file mode 100644
index 000000000000..f2766d84c7a0
--- /dev/null
+++ b/arch/x86/kernel/amd_iommu.c
@@ -0,0 +1,962 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/pci.h>
+#include <linux/gfp.h>
+#include <linux/bitops.h>
+#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
+#include <asm/proto.h>
+#include <asm/gart.h>
+#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu.h>
+
+#define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
+
+#define to_pages(addr, size) \
+	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
+
+static DEFINE_RWLOCK(amd_iommu_devtable_lock);
+
+struct command {
+	u32 data[4];
+};
+
+static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
+			     struct unity_map_entry *e);
+
+static int iommu_has_npcache(struct amd_iommu *iommu)
+{
+	return iommu->cap & IOMMU_CAP_NPCACHE;
+}
+
+static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+{
+	u32 tail, head;
+	u8 *target;
+
+	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+	target = (iommu->cmd_buf + tail);
+	memcpy_toio(target, cmd, sizeof(*cmd));
+	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
+	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	if (tail == head)
+		return -ENOMEM;
+	writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+	return 0;
+}
+
+static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&iommu->lock, flags);
+	ret = __iommu_queue_command(iommu, cmd);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	return ret;
+}
+
+static int iommu_completion_wait(struct amd_iommu *iommu)
+{
+	int ret;
+	struct command cmd;
+	volatile u64 ready = 0;
+	unsigned long ready_phys = virt_to_phys(&ready);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
+	cmd.data[1] = HIGH_U32(ready_phys);
+	cmd.data[2] = 1; /* value written to 'ready' */
+	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
+
+	iommu->need_sync = 0;
+
+	ret = iommu_queue_command(iommu, &cmd);
+
+	if (ret)
+		return ret;
+
+	while (!ready)
+		cpu_relax();
+
+	return 0;
+}
+
+static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
+{
+	struct command cmd;
+
+	BUG_ON(iommu == NULL);
+
+	memset(&cmd, 0, sizeof(cmd));
+	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
+	cmd.data[0] = devid;
+
+	iommu->need_sync = 1;
+
+	return iommu_queue_command(iommu, &cmd);
+}
+
+static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
+		u64 address, u16 domid, int pde, int s)
+{
+	struct command cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	address &= PAGE_MASK;
+	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
+	cmd.data[1] |= domid;
+	cmd.data[2] = LOW_U32(address);
+	cmd.data[3] = HIGH_U32(address);
+	if (s)
+		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+	if (pde)
+		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+
+	iommu->need_sync = 1;
+
+	return iommu_queue_command(iommu, &cmd);
+}
+
+static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
+		u64 address, size_t size)
+{
+	int s = 0;
+	unsigned pages = to_pages(address, size);
+
+	address &= PAGE_MASK;
+
+	if (pages > 1) {
+		/*
+		 * If we have to flush more than one page, flush all
+		 * TLB entries for this domain
+		 */
+		address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+		s = 1;
+	}
+
+	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s);
+
+	return 0;
+}
+
+static int iommu_map(struct protection_domain *dom,
+		     unsigned long bus_addr,
+		     unsigned long phys_addr,
+		     int prot)
+{
+	u64 __pte, *pte, *page;
+
+	bus_addr  = PAGE_ALIGN(bus_addr);
+	phys_addr = PAGE_ALIGN(bus_addr);
+
+	/* only support 512GB address spaces for now */
+	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+		return -EINVAL;
+
+	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+		*pte = IOMMU_L2_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
+
+	if (!IOMMU_PTE_PRESENT(*pte)) {
+		page = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+		*pte = IOMMU_L1_PDE(virt_to_phys(page));
+	}
+
+	pte = IOMMU_PTE_PAGE(*pte);
+	pte = &pte[IOMMU_PTE_L0_INDEX(bus_addr)];
+
+	if (IOMMU_PTE_PRESENT(*pte))
+		return -EBUSY;
+
+	__pte = phys_addr | IOMMU_PTE_P;
+	if (prot & IOMMU_PROT_IR)
+		__pte |= IOMMU_PTE_IR;
+	if (prot & IOMMU_PROT_IW)
+		__pte |= IOMMU_PTE_IW;
+
+	*pte = __pte;
+
+	return 0;
+}
+
+static int iommu_for_unity_map(struct amd_iommu *iommu,
+			       struct unity_map_entry *entry)
+{
+	u16 bdf, i;
+
+	for (i = entry->devid_start; i <= entry->devid_end; ++i) {
+		bdf = amd_iommu_alias_table[i];
+		if (amd_iommu_rlookup_table[bdf] == iommu)
+			return 1;
+	}
+
+	return 0;
+}
+
+static int iommu_init_unity_mappings(struct amd_iommu *iommu)
+{
+	struct unity_map_entry *entry;
+	int ret;
+
+	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
+		if (!iommu_for_unity_map(iommu, entry))
+			continue;
+		ret = dma_ops_unity_map(iommu->default_dom, entry);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
+			     struct unity_map_entry *e)
+{
+	u64 addr;
+	int ret;
+
+	for (addr = e->address_start; addr < e->address_end;
+	     addr += PAGE_SIZE) {
+		ret = iommu_map(&dma_dom->domain, addr, addr, e->prot);
+		if (ret)
+			return ret;
+		/*
+		 * if unity mapping is in aperture range mark the page
+		 * as allocated in the aperture
+		 */
+		if (addr < dma_dom->aperture_size)
+			__set_bit(addr >> PAGE_SHIFT, dma_dom->bitmap);
+	}
+
+	return 0;
+}
+
+static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
+					  u16 devid)
+{
+	struct unity_map_entry *e;
+	int ret;
+
+	list_for_each_entry(e, &amd_iommu_unity_map, list) {
+		if (!(devid >= e->devid_start && devid <= e->devid_end))
+			continue;
+		ret = dma_ops_unity_map(dma_dom, e);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static unsigned long dma_mask_to_pages(unsigned long mask)
+{
+	return (mask >> PAGE_SHIFT) +
+		(PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
+}
+
+static unsigned long dma_ops_alloc_addresses(struct device *dev,
+					     struct dma_ops_domain *dom,
+					     unsigned int pages)
+{
+	unsigned long limit = dma_mask_to_pages(*dev->dma_mask);
+	unsigned long address;
+	unsigned long size = dom->aperture_size >> PAGE_SHIFT;
+	unsigned long boundary_size;
+
+	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+			PAGE_SIZE) >> PAGE_SHIFT;
+	limit = limit < size ? limit : size;
+
+	if (dom->next_bit >= limit)
+		dom->next_bit = 0;
+
+	address = iommu_area_alloc(dom->bitmap, limit, dom->next_bit, pages,
+			0 , boundary_size, 0);
+	if (address == -1)
+		address = iommu_area_alloc(dom->bitmap, limit, 0, pages,
+				0, boundary_size, 0);
+
+	if (likely(address != -1)) {
+		dom->next_bit = address + pages;
+		address <<= PAGE_SHIFT;
+	} else
+		address = bad_dma_address;
+
+	WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size);
+
+	return address;
+}
+
+static void dma_ops_free_addresses(struct dma_ops_domain *dom,
+				   unsigned long address,
+				   unsigned int pages)
+{
+	address >>= PAGE_SHIFT;
+	iommu_area_free(dom->bitmap, address, pages);
+}
+
+static u16 domain_id_alloc(void)
+{
+	unsigned long flags;
+	int id;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	id = find_first_zero_bit(amd_iommu_pd_alloc_bitmap, MAX_DOMAIN_ID);
+	BUG_ON(id == 0);
+	if (id > 0 && id < MAX_DOMAIN_ID)
+		__set_bit(id, amd_iommu_pd_alloc_bitmap);
+	else
+		id = 0;
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return id;
+}
+
+static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
+				      unsigned long start_page,
+				      unsigned int pages)
+{
+	unsigned int last_page = dom->aperture_size >> PAGE_SHIFT;
+
+	if (start_page + pages > last_page)
+		pages = last_page - start_page;
+
+	set_bit_string(dom->bitmap, start_page, pages);
+}
+
+static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
+{
+	int i, j;
+	u64 *p1, *p2, *p3;
+
+	p1 = dma_dom->domain.pt_root;
+
+	if (!p1)
+		return;
+
+	for (i = 0; i < 512; ++i) {
+		if (!IOMMU_PTE_PRESENT(p1[i]))
+			continue;
+
+		p2 = IOMMU_PTE_PAGE(p1[i]);
+		for (j = 0; j < 512; ++i) {
+			if (!IOMMU_PTE_PRESENT(p2[j]))
+				continue;
+			p3 = IOMMU_PTE_PAGE(p2[j]);
+			free_page((unsigned long)p3);
+		}
+
+		free_page((unsigned long)p2);
+	}
+
+	free_page((unsigned long)p1);
+}
+
+static void dma_ops_domain_free(struct dma_ops_domain *dom)
+{
+	if (!dom)
+		return;
+
+	dma_ops_free_pagetable(dom);
+
+	kfree(dom->pte_pages);
+
+	kfree(dom->bitmap);
+
+	kfree(dom);
+}
+
+static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
+						   unsigned order)
+{
+	struct dma_ops_domain *dma_dom;
+	unsigned i, num_pte_pages;
+	u64 *l2_pde;
+	u64 address;
+
+	/*
+	 * Currently the DMA aperture must be between 32 MB and 1GB in size
+	 */
+	if ((order < 25) || (order > 30))
+		return NULL;
+
+	dma_dom = kzalloc(sizeof(struct dma_ops_domain), GFP_KERNEL);
+	if (!dma_dom)
+		return NULL;
+
+	spin_lock_init(&dma_dom->domain.lock);
+
+	dma_dom->domain.id = domain_id_alloc();
+	if (dma_dom->domain.id == 0)
+		goto free_dma_dom;
+	dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
+	dma_dom->domain.priv = dma_dom;
+	if (!dma_dom->domain.pt_root)
+		goto free_dma_dom;
+	dma_dom->aperture_size = (1ULL << order);
+	dma_dom->bitmap = kzalloc(dma_dom->aperture_size / (PAGE_SIZE * 8),
+				  GFP_KERNEL);
+	if (!dma_dom->bitmap)
+		goto free_dma_dom;
+	/*
+	 * mark the first page as allocated so we never return 0 as
+	 * a valid dma-address. So we can use 0 as error value
+	 */
+	dma_dom->bitmap[0] = 1;
+	dma_dom->next_bit = 0;
+
+	if (iommu->exclusion_start &&
+	    iommu->exclusion_start < dma_dom->aperture_size) {
+		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
+		int pages = to_pages(iommu->exclusion_start,
+				iommu->exclusion_length);
+		dma_ops_reserve_addresses(dma_dom, startpage, pages);
+	}
+
+	num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
+	dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
+			GFP_KERNEL);
+	if (!dma_dom->pte_pages)
+		goto free_dma_dom;
+
+	l2_pde = (u64 *)get_zeroed_page(GFP_KERNEL);
+	if (l2_pde == NULL)
+		goto free_dma_dom;
+
+	dma_dom->domain.pt_root[0] = IOMMU_L2_PDE(virt_to_phys(l2_pde));
+
+	for (i = 0; i < num_pte_pages; ++i) {
+		dma_dom->pte_pages[i] = (u64 *)get_zeroed_page(GFP_KERNEL);
+		if (!dma_dom->pte_pages[i])
+			goto free_dma_dom;
+		address = virt_to_phys(dma_dom->pte_pages[i]);
+		l2_pde[i] = IOMMU_L1_PDE(address);
+	}
+
+	return dma_dom;
+
+free_dma_dom:
+	dma_ops_domain_free(dma_dom);
+
+	return NULL;
+}
+
+static struct protection_domain *domain_for_device(u16 devid)
+{
+	struct protection_domain *dom;
+	unsigned long flags;
+
+	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	dom = amd_iommu_pd_table[devid];
+	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return dom;
+}
+
+static void set_device_domain(struct amd_iommu *iommu,
+			      struct protection_domain *domain,
+			      u16 devid)
+{
+	unsigned long flags;
+
+	u64 pte_root = virt_to_phys(domain->pt_root);
+
+	pte_root |= (domain->mode & 0x07) << 9;
+	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | 2;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	amd_iommu_dev_table[devid].data[0] = pte_root;
+	amd_iommu_dev_table[devid].data[1] = pte_root >> 32;
+	amd_iommu_dev_table[devid].data[2] = domain->id;
+
+	amd_iommu_pd_table[devid] = domain;
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	iommu_queue_inv_dev_entry(iommu, devid);
+
+	iommu->need_sync = 1;
+}
+
+static int get_device_resources(struct device *dev,
+				struct amd_iommu **iommu,
+				struct protection_domain **domain,
+				u16 *bdf)
+{
+	struct dma_ops_domain *dma_dom;
+	struct pci_dev *pcidev;
+	u16 _bdf;
+
+	BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
+
+	pcidev = to_pci_dev(dev);
+	_bdf = (pcidev->bus->number << 8) | pcidev->devfn;
+
+	if (_bdf >= amd_iommu_last_bdf) {
+		*iommu = NULL;
+		*domain = NULL;
+		*bdf = 0xffff;
+		return 0;
+	}
+
+	*bdf = amd_iommu_alias_table[_bdf];
+
+	*iommu = amd_iommu_rlookup_table[*bdf];
+	if (*iommu == NULL)
+		return 0;
+	dma_dom = (*iommu)->default_dom;
+	*domain = domain_for_device(*bdf);
+	if (*domain == NULL) {
+		*domain = &dma_dom->domain;
+		set_device_domain(*iommu, *domain, *bdf);
+		printk(KERN_INFO "AMD IOMMU: Using protection domain %d for "
+				"device ", (*domain)->id);
+		print_devid(_bdf, 1);
+	}
+
+	return 1;
+}
+
+static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
+				     struct dma_ops_domain *dom,
+				     unsigned long address,
+				     phys_addr_t paddr,
+				     int direction)
+{
+	u64 *pte, __pte;
+
+	WARN_ON(address > dom->aperture_size);
+
+	paddr &= PAGE_MASK;
+
+	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
+	pte += IOMMU_PTE_L0_INDEX(address);
+
+	__pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC;
+
+	if (direction == DMA_TO_DEVICE)
+		__pte |= IOMMU_PTE_IR;
+	else if (direction == DMA_FROM_DEVICE)
+		__pte |= IOMMU_PTE_IW;
+	else if (direction == DMA_BIDIRECTIONAL)
+		__pte |= IOMMU_PTE_IR | IOMMU_PTE_IW;
+
+	WARN_ON(*pte);
+
+	*pte = __pte;
+
+	return (dma_addr_t)address;
+}
+
+static void dma_ops_domain_unmap(struct amd_iommu *iommu,
+				 struct dma_ops_domain *dom,
+				 unsigned long address)
+{
+	u64 *pte;
+
+	if (address >= dom->aperture_size)
+		return;
+
+	WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+
+	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
+	pte += IOMMU_PTE_L0_INDEX(address);
+
+	WARN_ON(!*pte);
+
+	*pte = 0ULL;
+}
+
+static dma_addr_t __map_single(struct device *dev,
+			       struct amd_iommu *iommu,
+			       struct dma_ops_domain *dma_dom,
+			       phys_addr_t paddr,
+			       size_t size,
+			       int dir)
+{
+	dma_addr_t offset = paddr & ~PAGE_MASK;
+	dma_addr_t address, start;
+	unsigned int pages;
+	int i;
+
+	pages = to_pages(paddr, size);
+	paddr &= PAGE_MASK;
+
+	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
+	if (unlikely(address == bad_dma_address))
+		goto out;
+
+	start = address;
+	for (i = 0; i < pages; ++i) {
+		dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
+		paddr += PAGE_SIZE;
+		start += PAGE_SIZE;
+	}
+	address += offset;
+
+out:
+	return address;
+}
+
+static void __unmap_single(struct amd_iommu *iommu,
+			   struct dma_ops_domain *dma_dom,
+			   dma_addr_t dma_addr,
+			   size_t size,
+			   int dir)
+{
+	dma_addr_t i, start;
+	unsigned int pages;
+
+	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+		return;
+
+	pages = to_pages(dma_addr, size);
+	dma_addr &= PAGE_MASK;
+	start = dma_addr;
+
+	for (i = 0; i < pages; ++i) {
+		dma_ops_domain_unmap(iommu, dma_dom, start);
+		start += PAGE_SIZE;
+	}
+
+	dma_ops_free_addresses(dma_dom, dma_addr, pages);
+}
+
+static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
+			     size_t size, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	dma_addr_t addr;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (iommu == NULL || domain == NULL)
+		return (dma_addr_t)paddr;
+
+	spin_lock_irqsave(&domain->lock, flags);
+	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir);
+	if (addr == bad_dma_address)
+		goto out;
+
+	if (iommu_has_npcache(iommu))
+		iommu_flush_pages(iommu, domain->id, addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return addr;
+}
+
+static void unmap_single(struct device *dev, dma_addr_t dma_addr,
+			 size_t size, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+
+	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		return;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
+
+	iommu_flush_pages(iommu, domain->id, dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+}
+
+static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
+			   int nelems, int dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sglist, s, nelems, i) {
+		s->dma_address = (dma_addr_t)sg_phys(s);
+		s->dma_length  = s->length;
+	}
+
+	return nelems;
+}
+
+static int map_sg(struct device *dev, struct scatterlist *sglist,
+		  int nelems, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	int i;
+	struct scatterlist *s;
+	phys_addr_t paddr;
+	int mapped_elems = 0;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain)
+		return map_sg_no_iommu(dev, sglist, nelems, dir);
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	for_each_sg(sglist, s, nelems, i) {
+		paddr = sg_phys(s);
+
+		s->dma_address = __map_single(dev, iommu, domain->priv,
+					      paddr, s->length, dir);
+
+		if (s->dma_address) {
+			s->dma_length = s->length;
+			mapped_elems++;
+		} else
+			goto unmap;
+		if (iommu_has_npcache(iommu))
+			iommu_flush_pages(iommu, domain->id, s->dma_address,
+					  s->dma_length);
+	}
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return mapped_elems;
+unmap:
+	for_each_sg(sglist, s, mapped_elems, i) {
+		if (s->dma_address)
+			__unmap_single(iommu, domain->priv, s->dma_address,
+				       s->dma_length, dir);
+		s->dma_address = s->dma_length = 0;
+	}
+
+	mapped_elems = 0;
+
+	goto out;
+}
+
+static void unmap_sg(struct device *dev, struct scatterlist *sglist,
+		     int nelems, int dir)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	struct scatterlist *s;
+	u16 devid;
+	int i;
+
+	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		return;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	for_each_sg(sglist, s, nelems, i) {
+		__unmap_single(iommu, domain->priv, s->dma_address,
+			       s->dma_length, dir);
+		iommu_flush_pages(iommu, domain->id, s->dma_address,
+				  s->dma_length);
+		s->dma_address = s->dma_length = 0;
+	}
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+}
+
+static void *alloc_coherent(struct device *dev, size_t size,
+			    dma_addr_t *dma_addr, gfp_t flag)
+{
+	unsigned long flags;
+	void *virt_addr;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+	phys_addr_t paddr;
+
+	virt_addr = (void *)__get_free_pages(flag, get_order(size));
+	if (!virt_addr)
+		return 0;
+
+	memset(virt_addr, 0, size);
+	paddr = virt_to_phys(virt_addr);
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain) {
+		*dma_addr = (dma_addr_t)paddr;
+		return virt_addr;
+	}
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
+				 size, DMA_BIDIRECTIONAL);
+
+	if (*dma_addr == bad_dma_address) {
+		free_pages((unsigned long)virt_addr, get_order(size));
+		virt_addr = NULL;
+		goto out;
+	}
+
+	if (iommu_has_npcache(iommu))
+		iommu_flush_pages(iommu, domain->id, *dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return virt_addr;
+}
+
+static void free_coherent(struct device *dev, size_t size,
+			  void *virt_addr, dma_addr_t dma_addr)
+{
+	unsigned long flags;
+	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	u16 devid;
+
+	get_device_resources(dev, &iommu, &domain, &devid);
+
+	if (!iommu || !domain)
+		goto free_mem;
+
+	spin_lock_irqsave(&domain->lock, flags);
+
+	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
+	iommu_flush_pages(iommu, domain->id, dma_addr, size);
+
+	if (iommu->need_sync)
+		iommu_completion_wait(iommu);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+free_mem:
+	free_pages((unsigned long)virt_addr, get_order(size));
+}
+
+/*
+ * If the driver core informs the DMA layer if a driver grabs a device
+ * we don't need to preallocate the protection domains anymore.
+ * For now we have to.
+ */
+void prealloc_protection_domains(void)
+{
+	struct pci_dev *dev = NULL;
+	struct dma_ops_domain *dma_dom;
+	struct amd_iommu *iommu;
+	int order = amd_iommu_aperture_order;
+	u16 devid;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		devid = (dev->bus->number << 8) | dev->devfn;
+		if (devid >= amd_iommu_last_bdf)
+			continue;
+		devid = amd_iommu_alias_table[devid];
+		if (domain_for_device(devid))
+			continue;
+		iommu = amd_iommu_rlookup_table[devid];
+		if (!iommu)
+			continue;
+		dma_dom = dma_ops_domain_alloc(iommu, order);
+		if (!dma_dom)
+			continue;
+		init_unity_mappings_for_device(dma_dom, devid);
+		set_device_domain(iommu, &dma_dom->domain, devid);
+		printk(KERN_INFO "AMD IOMMU: Allocated domain %d for device ",
+		       dma_dom->domain.id);
+		print_devid(devid, 1);
+	}
+}
+
+static struct dma_mapping_ops amd_iommu_dma_ops = {
+	.alloc_coherent = alloc_coherent,
+	.free_coherent = free_coherent,
+	.map_single = map_single,
+	.unmap_single = unmap_single,
+	.map_sg = map_sg,
+	.unmap_sg = unmap_sg,
+};
+
+int __init amd_iommu_init_dma_ops(void)
+{
+	struct amd_iommu *iommu;
+	int order = amd_iommu_aperture_order;
+	int ret;
+
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		iommu->default_dom = dma_ops_domain_alloc(iommu, order);
+		if (iommu->default_dom == NULL)
+			return -ENOMEM;
+		ret = iommu_init_unity_mappings(iommu);
+		if (ret)
+			goto free_domains;
+	}
+
+	if (amd_iommu_isolate)
+		prealloc_protection_domains();
+
+	iommu_detected = 1;
+	force_iommu = 1;
+	bad_dma_address = 0;
+#ifdef CONFIG_GART_IOMMU
+	gart_iommu_aperture_disabled = 1;
+	gart_iommu_aperture = 0;
+#endif
+
+	dma_ops = &amd_iommu_dma_ops;
+
+	return 0;
+
+free_domains:
+
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		if (iommu->default_dom)
+			dma_ops_domain_free(iommu->default_dom);
+	}
+
+	return ret;
+}
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
new file mode 100644
index 000000000000..2a13e430437d
--- /dev/null
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -0,0 +1,875 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/sysdev.h>
+#include <asm/pci-direct.h>
+#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu.h>
+#include <asm/gart.h>
+
+/*
+ * definitions for the ACPI scanning code
+ */
+#define UPDATE_LAST_BDF(x) do {\
+	if ((x) > amd_iommu_last_bdf) \
+		amd_iommu_last_bdf = (x); \
+	} while (0);
+
+#define DEVID(bus, devfn) (((bus) << 8) | (devfn))
+#define PCI_BUS(x) (((x) >> 8) & 0xff)
+#define IVRS_HEADER_LENGTH 48
+#define TBL_SIZE(x) (1 << (PAGE_SHIFT + get_order(amd_iommu_last_bdf * (x))))
+
+#define ACPI_IVHD_TYPE                  0x10
+#define ACPI_IVMD_TYPE_ALL              0x20
+#define ACPI_IVMD_TYPE                  0x21
+#define ACPI_IVMD_TYPE_RANGE            0x22
+
+#define IVHD_DEV_ALL                    0x01
+#define IVHD_DEV_SELECT                 0x02
+#define IVHD_DEV_SELECT_RANGE_START     0x03
+#define IVHD_DEV_RANGE_END              0x04
+#define IVHD_DEV_ALIAS                  0x42
+#define IVHD_DEV_ALIAS_RANGE            0x43
+#define IVHD_DEV_EXT_SELECT             0x46
+#define IVHD_DEV_EXT_SELECT_RANGE       0x47
+
+#define IVHD_FLAG_HT_TUN_EN             0x00
+#define IVHD_FLAG_PASSPW_EN             0x01
+#define IVHD_FLAG_RESPASSPW_EN          0x02
+#define IVHD_FLAG_ISOC_EN               0x03
+
+#define IVMD_FLAG_EXCL_RANGE            0x08
+#define IVMD_FLAG_UNITY_MAP             0x01
+
+#define ACPI_DEVFLAG_INITPASS           0x01
+#define ACPI_DEVFLAG_EXTINT             0x02
+#define ACPI_DEVFLAG_NMI                0x04
+#define ACPI_DEVFLAG_SYSMGT1            0x10
+#define ACPI_DEVFLAG_SYSMGT2            0x20
+#define ACPI_DEVFLAG_LINT0              0x40
+#define ACPI_DEVFLAG_LINT1              0x80
+#define ACPI_DEVFLAG_ATSDIS             0x10000000
+
+struct ivhd_header {
+	u8 type;
+	u8 flags;
+	u16 length;
+	u16 devid;
+	u16 cap_ptr;
+	u64 mmio_phys;
+	u16 pci_seg;
+	u16 info;
+	u32 reserved;
+} __attribute__((packed));
+
+struct ivhd_entry {
+	u8 type;
+	u16 devid;
+	u8 flags;
+	u32 ext;
+} __attribute__((packed));
+
+struct ivmd_header {
+	u8 type;
+	u8 flags;
+	u16 length;
+	u16 devid;
+	u16 aux;
+	u64 resv;
+	u64 range_start;
+	u64 range_length;
+} __attribute__((packed));
+
+static int __initdata amd_iommu_detected;
+
+u16 amd_iommu_last_bdf;
+struct list_head amd_iommu_unity_map;
+unsigned amd_iommu_aperture_order = 26;
+int amd_iommu_isolate;
+
+struct list_head amd_iommu_list;
+struct dev_table_entry *amd_iommu_dev_table;
+u16 *amd_iommu_alias_table;
+struct amd_iommu **amd_iommu_rlookup_table;
+struct protection_domain **amd_iommu_pd_table;
+unsigned long *amd_iommu_pd_alloc_bitmap;
+
+static u32 dev_table_size;
+static u32 alias_table_size;
+static u32 rlookup_table_size;
+
+static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
+{
+	u64 start = iommu->exclusion_start & PAGE_MASK;
+	u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
+	u64 entry;
+
+	if (!iommu->exclusion_start)
+		return;
+
+	entry = start | MMIO_EXCL_ENABLE_MASK;
+	memcpy_toio(iommu->mmio_base + MMIO_EXCL_BASE_OFFSET,
+			&entry, sizeof(entry));
+
+	entry = limit;
+	memcpy_toio(iommu->mmio_base + MMIO_EXCL_LIMIT_OFFSET,
+			&entry, sizeof(entry));
+}
+
+static void __init iommu_set_device_table(struct amd_iommu *iommu)
+{
+	u32 entry;
+
+	BUG_ON(iommu->mmio_base == NULL);
+
+	entry = virt_to_phys(amd_iommu_dev_table);
+	entry |= (dev_table_size >> 12) - 1;
+	memcpy_toio(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET,
+			&entry, sizeof(entry));
+}
+
+static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
+{
+	u32 ctrl;
+
+	ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl |= (1 << bit);
+	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+}
+
+static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+{
+	u32 ctrl;
+
+	ctrl = (u64)readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
+	ctrl &= ~(1 << bit);
+	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+}
+
+void __init iommu_enable(struct amd_iommu *iommu)
+{
+	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
+	print_devid(iommu->devid, 0);
+	printk(" cap 0x%hx\n", iommu->cap_ptr);
+
+	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
+}
+
+static u8 * __init iommu_map_mmio_space(u64 address)
+{
+	u8 *ret;
+
+	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
+		return NULL;
+
+	ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
+	if (ret != NULL)
+		return ret;
+
+	release_mem_region(address, MMIO_REGION_LENGTH);
+
+	return NULL;
+}
+
+static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
+{
+	if (iommu->mmio_base)
+		iounmap(iommu->mmio_base);
+	release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
+}
+
+static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
+{
+	u32 cap;
+
+	cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
+	UPDATE_LAST_BDF(DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
+
+	return 0;
+}
+
+static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
+{
+	u8 *p = (void *)h, *end = (void *)h;
+	struct ivhd_entry *dev;
+
+	p += sizeof(*h);
+	end += h->length;
+
+	find_last_devid_on_pci(PCI_BUS(h->devid),
+			PCI_SLOT(h->devid),
+			PCI_FUNC(h->devid),
+			h->cap_ptr);
+
+	while (p < end) {
+		dev = (struct ivhd_entry *)p;
+		switch (dev->type) {
+		case IVHD_DEV_SELECT:
+		case IVHD_DEV_RANGE_END:
+		case IVHD_DEV_ALIAS:
+		case IVHD_DEV_EXT_SELECT:
+			UPDATE_LAST_BDF(dev->devid);
+			break;
+		default:
+			break;
+		}
+		p += 0x04 << (*p >> 6);
+	}
+
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+static int __init find_last_devid_acpi(struct acpi_table_header *table)
+{
+	int i;
+	u8 checksum = 0, *p = (u8 *)table, *end = (u8 *)table;
+	struct ivhd_header *h;
+
+	/*
+	 * Validate checksum here so we don't need to do it when
+	 * we actually parse the table
+	 */
+	for (i = 0; i < table->length; ++i)
+		checksum += p[i];
+	if (checksum != 0)
+		/* ACPI table corrupt */
+		return -ENODEV;
+
+	p += IVRS_HEADER_LENGTH;
+
+	end += table->length;
+	while (p < end) {
+		h = (struct ivhd_header *)p;
+		switch (h->type) {
+		case ACPI_IVHD_TYPE:
+			find_last_devid_from_ivhd(h);
+			break;
+		default:
+			break;
+		}
+		p += h->length;
+	}
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
+{
+	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL,
+			get_order(CMD_BUFFER_SIZE));
+	u64 entry = 0;
+
+	if (cmd_buf == NULL)
+		return NULL;
+
+	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
+
+	memset(cmd_buf, 0, CMD_BUFFER_SIZE);
+
+	entry = (u64)virt_to_phys(cmd_buf);
+	entry |= MMIO_CMD_SIZE_512;
+	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
+			&entry, sizeof(entry));
+
+	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+
+	return cmd_buf;
+}
+
+static void __init free_command_buffer(struct amd_iommu *iommu)
+{
+	if (iommu->cmd_buf)
+		free_pages((unsigned long)iommu->cmd_buf,
+				get_order(CMD_BUFFER_SIZE));
+}
+
+static void set_dev_entry_bit(u16 devid, u8 bit)
+{
+	int i = (bit >> 5) & 0x07;
+	int _bit = bit & 0x1f;
+
+	amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
+}
+
+static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
+{
+	if (flags & ACPI_DEVFLAG_INITPASS)
+		set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
+	if (flags & ACPI_DEVFLAG_EXTINT)
+		set_dev_entry_bit(devid, DEV_ENTRY_EINT_PASS);
+	if (flags & ACPI_DEVFLAG_NMI)
+		set_dev_entry_bit(devid, DEV_ENTRY_NMI_PASS);
+	if (flags & ACPI_DEVFLAG_SYSMGT1)
+		set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1);
+	if (flags & ACPI_DEVFLAG_SYSMGT2)
+		set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2);
+	if (flags & ACPI_DEVFLAG_LINT0)
+		set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
+	if (flags & ACPI_DEVFLAG_LINT1)
+		set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
+}
+
+static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
+{
+	amd_iommu_rlookup_table[devid] = iommu;
+}
+
+static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
+{
+	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+
+	if (!(m->flags & IVMD_FLAG_EXCL_RANGE))
+		return;
+
+	if (iommu) {
+		set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
+		iommu->exclusion_start = m->range_start;
+		iommu->exclusion_length = m->range_length;
+	}
+}
+
+static void __init init_iommu_from_pci(struct amd_iommu *iommu)
+{
+	int bus = PCI_BUS(iommu->devid);
+	int dev = PCI_SLOT(iommu->devid);
+	int fn  = PCI_FUNC(iommu->devid);
+	int cap_ptr = iommu->cap_ptr;
+	u32 range;
+
+	iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
+
+	range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
+	iommu->first_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_FD(range));
+	iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range));
+}
+
+static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
+					struct ivhd_header *h)
+{
+	u8 *p = (u8 *)h;
+	u8 *end = p, flags = 0;
+	u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
+	u32 ext_flags = 0;
+	bool alias = 0;
+	struct ivhd_entry *e;
+
+	/*
+	 * First set the recommended feature enable bits from ACPI
+	 * into the IOMMU control registers
+	 */
+	h->flags & IVHD_FLAG_HT_TUN_EN ?
+		iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
+		iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
+
+	h->flags & IVHD_FLAG_PASSPW_EN ?
+		iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
+
+	h->flags & IVHD_FLAG_RESPASSPW_EN ?
+		iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
+
+	h->flags & IVHD_FLAG_ISOC_EN ?
+		iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
+		iommu_feature_disable(iommu, CONTROL_ISOC_EN);
+
+	/*
+	 * make IOMMU memory accesses cache coherent
+	 */
+	iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+
+	/*
+	 * Done. Now parse the device entries
+	 */
+	p += sizeof(struct ivhd_header);
+	end += h->length;
+
+	while (p < end) {
+		e = (struct ivhd_entry *)p;
+		switch (e->type) {
+		case IVHD_DEV_ALL:
+			for (dev_i = iommu->first_device;
+					dev_i <= iommu->last_device; ++dev_i)
+				set_dev_entry_from_acpi(dev_i, e->flags, 0);
+			break;
+		case IVHD_DEV_SELECT:
+			devid = e->devid;
+			set_dev_entry_from_acpi(devid, e->flags, 0);
+			break;
+		case IVHD_DEV_SELECT_RANGE_START:
+			devid_start = e->devid;
+			flags = e->flags;
+			ext_flags = 0;
+			alias = 0;
+			break;
+		case IVHD_DEV_ALIAS:
+			devid = e->devid;
+			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(devid, e->flags, 0);
+			amd_iommu_alias_table[devid] = devid_to;
+			break;
+		case IVHD_DEV_ALIAS_RANGE:
+			devid_start = e->devid;
+			flags = e->flags;
+			devid_to = e->ext >> 8;
+			ext_flags = 0;
+			alias = 1;
+			break;
+		case IVHD_DEV_EXT_SELECT:
+			devid = e->devid;
+			set_dev_entry_from_acpi(devid, e->flags, e->ext);
+			break;
+		case IVHD_DEV_EXT_SELECT_RANGE:
+			devid_start = e->devid;
+			flags = e->flags;
+			ext_flags = e->ext;
+			alias = 0;
+			break;
+		case IVHD_DEV_RANGE_END:
+			devid = e->devid;
+			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
+				if (alias)
+					amd_iommu_alias_table[dev_i] = devid_to;
+				set_dev_entry_from_acpi(
+						amd_iommu_alias_table[dev_i],
+						flags, ext_flags);
+			}
+			break;
+		default:
+			break;
+		}
+
+		p += 0x04 << (e->type >> 6);
+	}
+}
+
+static int __init init_iommu_devices(struct amd_iommu *iommu)
+{
+	u16 i;
+
+	for (i = iommu->first_device; i <= iommu->last_device; ++i)
+		set_iommu_for_device(iommu, i);
+
+	return 0;
+}
+
+static void __init free_iommu_one(struct amd_iommu *iommu)
+{
+	free_command_buffer(iommu);
+	iommu_unmap_mmio_space(iommu);
+}
+
+static void __init free_iommu_all(void)
+{
+	struct amd_iommu *iommu, *next;
+
+	list_for_each_entry_safe(iommu, next, &amd_iommu_list, list) {
+		list_del(&iommu->list);
+		free_iommu_one(iommu);
+		kfree(iommu);
+	}
+}
+
+static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
+{
+	spin_lock_init(&iommu->lock);
+	list_add_tail(&iommu->list, &amd_iommu_list);
+
+	/*
+	 * Copy data from ACPI table entry to the iommu struct
+	 */
+	iommu->devid = h->devid;
+	iommu->cap_ptr = h->cap_ptr;
+	iommu->mmio_phys = h->mmio_phys;
+	iommu->mmio_base = iommu_map_mmio_space(h->mmio_phys);
+	if (!iommu->mmio_base)
+		return -ENOMEM;
+
+	iommu_set_device_table(iommu);
+	iommu->cmd_buf = alloc_command_buffer(iommu);
+	if (!iommu->cmd_buf)
+		return -ENOMEM;
+
+	init_iommu_from_pci(iommu);
+	init_iommu_from_acpi(iommu, h);
+	init_iommu_devices(iommu);
+
+	return 0;
+}
+
+static int __init init_iommu_all(struct acpi_table_header *table)
+{
+	u8 *p = (u8 *)table, *end = (u8 *)table;
+	struct ivhd_header *h;
+	struct amd_iommu *iommu;
+	int ret;
+
+	INIT_LIST_HEAD(&amd_iommu_list);
+
+	end += table->length;
+	p += IVRS_HEADER_LENGTH;
+
+	while (p < end) {
+		h = (struct ivhd_header *)p;
+		switch (*p) {
+		case ACPI_IVHD_TYPE:
+			iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
+			if (iommu == NULL)
+				return -ENOMEM;
+			ret = init_iommu_one(iommu, h);
+			if (ret)
+				return ret;
+			break;
+		default:
+			break;
+		}
+		p += h->length;
+
+	}
+	WARN_ON(p != end);
+
+	return 0;
+}
+
+static void __init free_unity_maps(void)
+{
+	struct unity_map_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &amd_iommu_unity_map, list) {
+		list_del(&entry->list);
+		kfree(entry);
+	}
+}
+
+static int __init init_exclusion_range(struct ivmd_header *m)
+{
+	int i;
+
+	switch (m->type) {
+	case ACPI_IVMD_TYPE:
+		set_device_exclusion_range(m->devid, m);
+		break;
+	case ACPI_IVMD_TYPE_ALL:
+		for (i = 0; i < amd_iommu_last_bdf; ++i)
+			set_device_exclusion_range(i, m);
+		break;
+	case ACPI_IVMD_TYPE_RANGE:
+		for (i = m->devid; i <= m->aux; ++i)
+			set_device_exclusion_range(i, m);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int __init init_unity_map_range(struct ivmd_header *m)
+{
+	struct unity_map_entry *e = 0;
+
+	e = kzalloc(sizeof(*e), GFP_KERNEL);
+	if (e == NULL)
+		return -ENOMEM;
+
+	switch (m->type) {
+	default:
+	case ACPI_IVMD_TYPE:
+		e->devid_start = e->devid_end = m->devid;
+		break;
+	case ACPI_IVMD_TYPE_ALL:
+		e->devid_start = 0;
+		e->devid_end = amd_iommu_last_bdf;
+		break;
+	case ACPI_IVMD_TYPE_RANGE:
+		e->devid_start = m->devid;
+		e->devid_end = m->aux;
+		break;
+	}
+	e->address_start = PAGE_ALIGN(m->range_start);
+	e->address_end = e->address_start + PAGE_ALIGN(m->range_length);
+	e->prot = m->flags >> 1;
+
+	list_add_tail(&e->list, &amd_iommu_unity_map);
+
+	return 0;
+}
+
+static int __init init_memory_definitions(struct acpi_table_header *table)
+{
+	u8 *p = (u8 *)table, *end = (u8 *)table;
+	struct ivmd_header *m;
+
+	INIT_LIST_HEAD(&amd_iommu_unity_map);
+
+	end += table->length;
+	p += IVRS_HEADER_LENGTH;
+
+	while (p < end) {
+		m = (struct ivmd_header *)p;
+		if (m->flags & IVMD_FLAG_EXCL_RANGE)
+			init_exclusion_range(m);
+		else if (m->flags & IVMD_FLAG_UNITY_MAP)
+			init_unity_map_range(m);
+
+		p += m->length;
+	}
+
+	return 0;
+}
+
+static void __init enable_iommus(void)
+{
+	struct amd_iommu *iommu;
+
+	list_for_each_entry(iommu, &amd_iommu_list, list) {
+		iommu_set_exclusion_range(iommu);
+		iommu_enable(iommu);
+	}
+}
+
+/*
+ * Suspend/Resume support
+ * disable suspend until real resume implemented
+ */
+
+static int amd_iommu_resume(struct sys_device *dev)
+{
+	return 0;
+}
+
+static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return -EINVAL;
+}
+
+static struct sysdev_class amd_iommu_sysdev_class = {
+	.name = "amd_iommu",
+	.suspend = amd_iommu_suspend,
+	.resume = amd_iommu_resume,
+};
+
+static struct sys_device device_amd_iommu = {
+	.id = 0,
+	.cls = &amd_iommu_sysdev_class,
+};
+
+int __init amd_iommu_init(void)
+{
+	int i, ret = 0;
+
+
+	if (no_iommu) {
+		printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+		return 0;
+	}
+
+	if (!amd_iommu_detected)
+		return -ENODEV;
+
+	/*
+	 * First parse ACPI tables to find the largest Bus/Dev/Func
+	 * we need to handle. Upon this information the shared data
+	 * structures for the IOMMUs in the system will be allocated
+	 */
+	if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
+		return -ENODEV;
+
+	dev_table_size     = TBL_SIZE(DEV_TABLE_ENTRY_SIZE);
+	alias_table_size   = TBL_SIZE(ALIAS_TABLE_ENTRY_SIZE);
+	rlookup_table_size = TBL_SIZE(RLOOKUP_TABLE_ENTRY_SIZE);
+
+	ret = -ENOMEM;
+
+	/* Device table - directly used by all IOMMUs */
+	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL,
+				      get_order(dev_table_size));
+	if (amd_iommu_dev_table == NULL)
+		goto out;
+
+	/*
+	 * Alias table - map PCI Bus/Dev/Func to Bus/Dev/Func the
+	 * IOMMU see for that device
+	 */
+	amd_iommu_alias_table = (void *)__get_free_pages(GFP_KERNEL,
+			get_order(alias_table_size));
+	if (amd_iommu_alias_table == NULL)
+		goto free;
+
+	/* IOMMU rlookup table - find the IOMMU for a specific device */
+	amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+			get_order(rlookup_table_size));
+	if (amd_iommu_rlookup_table == NULL)
+		goto free;
+
+	/*
+	 * Protection Domain table - maps devices to protection domains
+	 * This table has the same size as the rlookup_table
+	 */
+	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL,
+				     get_order(rlookup_table_size));
+	if (amd_iommu_pd_table == NULL)
+		goto free;
+
+	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(GFP_KERNEL,
+					    get_order(MAX_DOMAIN_ID/8));
+	if (amd_iommu_pd_alloc_bitmap == NULL)
+		goto free;
+
+	/*
+	 * memory is allocated now; initialize the device table with all zeroes
+	 * and let all alias entries point to itself
+	 */
+	memset(amd_iommu_dev_table, 0, dev_table_size);
+	for (i = 0; i < amd_iommu_last_bdf; ++i)
+		amd_iommu_alias_table[i] = i;
+
+	memset(amd_iommu_pd_table, 0, rlookup_table_size);
+	memset(amd_iommu_pd_alloc_bitmap, 0, MAX_DOMAIN_ID / 8);
+
+	/*
+	 * never allocate domain 0 because its used as the non-allocated and
+	 * error value placeholder
+	 */
+	amd_iommu_pd_alloc_bitmap[0] = 1;
+
+	/*
+	 * now the data structures are allocated and basically initialized
+	 * start the real acpi table scan
+	 */
+	ret = -ENODEV;
+	if (acpi_table_parse("IVRS", init_iommu_all) != 0)
+		goto free;
+
+	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
+		goto free;
+
+	ret = amd_iommu_init_dma_ops();
+	if (ret)
+		goto free;
+
+	ret = sysdev_class_register(&amd_iommu_sysdev_class);
+	if (ret)
+		goto free;
+
+	ret = sysdev_register(&device_amd_iommu);
+	if (ret)
+		goto free;
+
+	enable_iommus();
+
+	printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n",
+			(1 << (amd_iommu_aperture_order-20)));
+
+	printk(KERN_INFO "AMD IOMMU: device isolation ");
+	if (amd_iommu_isolate)
+		printk("enabled\n");
+	else
+		printk("disabled\n");
+
+out:
+	return ret;
+
+free:
+	if (amd_iommu_pd_alloc_bitmap)
+		free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+
+	if (amd_iommu_pd_table)
+		free_pages((unsigned long)amd_iommu_pd_table,
+				get_order(rlookup_table_size));
+
+	if (amd_iommu_rlookup_table)
+		free_pages((unsigned long)amd_iommu_rlookup_table,
+				get_order(rlookup_table_size));
+
+	if (amd_iommu_alias_table)
+		free_pages((unsigned long)amd_iommu_alias_table,
+				get_order(alias_table_size));
+
+	if (amd_iommu_dev_table)
+		free_pages((unsigned long)amd_iommu_dev_table,
+				get_order(dev_table_size));
+
+	free_iommu_all();
+
+	free_unity_maps();
+
+	goto out;
+}
+
+static int __init early_amd_iommu_detect(struct acpi_table_header *table)
+{
+	return 0;
+}
+
+void __init amd_iommu_detect(void)
+{
+	if (swiotlb || no_iommu || iommu_detected)
+		return;
+
+	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
+		iommu_detected = 1;
+		amd_iommu_detected = 1;
+#ifdef CONFIG_GART_IOMMU
+		gart_iommu_aperture_disabled = 1;
+		gart_iommu_aperture = 0;
+#endif
+	}
+}
+
+static int __init parse_amd_iommu_options(char *str)
+{
+	for (; *str; ++str) {
+		if (strcmp(str, "isolate") == 0)
+			amd_iommu_isolate = 1;
+	}
+
+	return 1;
+}
+
+static int __init parse_amd_iommu_size_options(char *str)
+{
+	for (; *str; ++str) {
+		if (strcmp(str, "32M") == 0)
+			amd_iommu_aperture_order = 25;
+		if (strcmp(str, "64M") == 0)
+			amd_iommu_aperture_order = 26;
+		if (strcmp(str, "128M") == 0)
+			amd_iommu_aperture_order = 27;
+		if (strcmp(str, "256M") == 0)
+			amd_iommu_aperture_order = 28;
+		if (strcmp(str, "512M") == 0)
+			amd_iommu_aperture_order = 29;
+		if (strcmp(str, "1G") == 0)
+			amd_iommu_aperture_order = 30;
+	}
+
+	return 1;
+}
+
+__setup("amd_iommu=", parse_amd_iommu_options);
+__setup("amd_iommu_size=", parse_amd_iommu_size_options);
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 479926d9e004..9f907806c1a5 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -35,6 +35,18 @@ int fallback_aper_force __initdata;
 
 int fix_aperture __initdata = 1;
 
+struct bus_dev_range {
+	int bus;
+	int dev_base;
+	int dev_limit;
+};
+
+static struct bus_dev_range bus_dev_ranges[] __initdata = {
+	{ 0x00, 0x18, 0x20},
+	{ 0xff, 0x00, 0x20},
+	{ 0xfe, 0x00, 0x20}
+};
+
 static struct resource gart_resource = {
 	.name	= "GART",
 	.flags	= IORESOURCE_MEM,
@@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void)
 	u32 aper_size;
 	void *p;
 
-	if (fallback_aper_order > 7)
-		fallback_aper_order = 7;
+	/* aper_size should <= 1G */
+	if (fallback_aper_order > 5)
+		fallback_aper_order = 5;
 	aper_size = (32 * 1024 * 1024) << fallback_aper_order;
 
 	/*
@@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void)
 	 * memory. Unfortunately we cannot move it up because that would
 	 * make the IOMMU useless.
 	 */
-	p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
+	/*
+	 * using 512M as goal, in case kexec will load kernel_big
+	 * that will do the on position decompress, and  could overlap with
+	 * that positon with gart that is used.
+	 * sequende:
+	 * kernel_small
+	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+	 * ==> kernel_small(gart area become e820_reserved)
+	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+	 * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+	 * so don't use 512M below as gart iommu, leave the space for kernel
+	 * code for safe
+	 */
+	p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -83,69 +109,53 @@ static u32 __init allocate_aperture(void)
 	return (u32)__pa(p);
 }
 
-static int __init aperture_valid(u64 aper_base, u32 aper_size)
-{
-	if (!aper_base)
-		return 0;
-
-	if (aper_base + aper_size > 0x100000000UL) {
-		printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
-		return 0;
-	}
-	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0;
-	}
-	if (aper_size < 64*1024*1024) {
-		printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20);
-		return 0;
-	}
-
-	return 1;
-}
 
 /* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap)
+static u32 __init find_cap(int bus, int slot, int func, int cap)
 {
 	int bytes;
 	u8 pos;
 
-	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+	if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) &
 						PCI_STATUS_CAP_LIST))
 		return 0;
 
-	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST);
 	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
 		u8 id;
 
 		pos &= ~3;
-		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID);
 		if (id == 0xff)
 			break;
 		if (id == cap)
 			return pos;
-		pos = read_pci_config_byte(num, slot, func,
+		pos = read_pci_config_byte(bus, slot, func,
 						pos+PCI_CAP_LIST_NEXT);
 	}
 	return 0;
 }
 
 /* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
+static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
 {
 	u32 apsize;
 	u32 apsizereg;
 	int nbits;
 	u32 aper_low, aper_hi;
 	u64 aper;
+	u32 old_order;
 
-	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
-	apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
+	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
+	apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
 	if (apsizereg == 0xffffffff) {
 		printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
 		return 0;
 	}
 
+	/* old_order could be the value from NB gart setting */
+	old_order = *order;
+
 	apsize = apsizereg & 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
 	if (apsize & 0xff)
@@ -155,14 +165,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
 	if ((int)*order < 0) /* < 32MB */
 		*order = 0;
 
-	aper_low = read_pci_config(num, slot, func, 0x10);
-	aper_hi = read_pci_config(num, slot, func, 0x14);
+	aper_low = read_pci_config(bus, slot, func, 0x10);
+	aper_hi = read_pci_config(bus, slot, func, 0x14);
 	aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
 
+	/*
+	 * On some sick chips, APSIZE is 0. It means it wants 4G
+	 * so let double check that order, and lets trust AMD NB settings:
+	 */
+	printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n",
+			aper, 32 << old_order);
+	if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
+				32 << *order, apsizereg);
+		*order = old_order;
+	}
+
 	printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
 			aper, 32 << *order, apsizereg);
 
-	if (!aperture_valid(aper, (32*1024*1024) << *order))
+	if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20))
 		return 0;
 	return (u32)aper;
 }
@@ -180,17 +202,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
  * the AGP bridges should be always an own bus on the HT hierarchy,
  * but do it here for future safety.
  */
-static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
+static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 {
-	int num, slot, func;
+	int bus, slot, func;
 
 	/* Poor man's PCI discovery */
-	for (num = 0; num < 256; num++) {
+	for (bus = 0; bus < 256; bus++) {
 		for (slot = 0; slot < 32; slot++) {
 			for (func = 0; func < 8; func++) {
 				u32 class, cap;
 				u8 type;
-				class = read_pci_config(num, slot, func,
+				class = read_pci_config(bus, slot, func,
 							PCI_CLASS_REVISION);
 				if (class == 0xffffffff)
 					break;
@@ -199,17 +221,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 				case PCI_CLASS_BRIDGE_HOST:
 				case PCI_CLASS_BRIDGE_OTHER: /* needed? */
 					/* AGP bridge? */
-					cap = find_cap(num, slot, func,
+					cap = find_cap(bus, slot, func,
 							PCI_CAP_ID_AGP);
 					if (!cap)
 						break;
 					*valid_agp = 1;
-					return read_agp(num, slot, func, cap,
+					return read_agp(bus, slot, func, cap,
 							order);
 				}
 
 				/* No multi-function device? */
-				type = read_pci_config_byte(num, slot, func,
+				type = read_pci_config_byte(bus, slot, func,
 							       PCI_HEADER_TYPE);
 				if (!(type & 0x80))
 					break;
@@ -249,36 +271,50 @@ void __init early_gart_iommu_check(void)
 	 * or BIOS forget to put that in reserved.
 	 * try to update e820 to make that region as reserved.
 	 */
-	int fix, num;
+	int i, fix, slot;
 	u32 ctl;
 	u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base = 0, last_aper_base = 0;
-	int aper_enabled = 0, last_aper_enabled = 0;
+	int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0;
 
 	if (!early_pci_allowed())
 		return;
 
+	/* This is mostly duplicate of iommu_hole_init */
 	fix = 0;
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		ctl = read_pci_config(0, num, 3, 0x90);
-		aper_enabled = ctl & 1;
-		aper_order = (ctl >> 1) & 7;
-		aper_size = (32 * 1024 * 1024) << aper_order;
-		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25;
-
-		if ((last_aper_order && aper_order != last_aper_order) ||
-		    (last_aper_base && aper_base != last_aper_base) ||
-		    (last_aper_enabled && aper_enabled != last_aper_enabled)) {
-			fix = 1;
-			break;
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+			aper_enabled = ctl & AMD64_GARTEN;
+			aper_order = (ctl >> 1) & 7;
+			aper_size = (32 * 1024 * 1024) << aper_order;
+			aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+			aper_base <<= 25;
+
+			if (last_valid) {
+				if ((aper_order != last_aper_order) ||
+				    (aper_base != last_aper_base) ||
+				    (aper_enabled != last_aper_enabled)) {
+					fix = 1;
+					break;
+				}
+			}
+
+			last_aper_order = aper_order;
+			last_aper_base = aper_base;
+			last_aper_enabled = aper_enabled;
+			last_valid = 1;
 		}
-		last_aper_order = aper_order;
-		last_aper_base = aper_base;
-		last_aper_enabled = aper_enabled;
 	}
 
 	if (!fix && !aper_enabled)
@@ -290,32 +326,46 @@ void __init early_gart_iommu_check(void)
 	if (gart_fix_e820 && !fix && aper_enabled) {
 		if (e820_any_mapped(aper_base, aper_base + aper_size,
 				    E820_RAM)) {
-			/* reserved it, so we can resuse it in second kernel */
+			/* reserve it, so we can reuse it in second kernel */
 			printk(KERN_INFO "update e820 for GART\n");
-			add_memory_region(aper_base, aper_size, E820_RESERVED);
+			e820_add_region(aper_base, aper_size, E820_RESERVED);
 			update_e820();
 		}
-		return;
 	}
 
+	if (!fix)
+		return;
+
 	/* different nodes have different setting, disable them all at first*/
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
 
-		ctl = read_pci_config(0, num, 3, 0x90);
-		ctl &= ~1;
-		write_pci_config(0, num, 3, 0x90, ctl);
+			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+			ctl &= ~AMD64_GARTEN;
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+		}
 	}
 
 }
 
+static int __initdata printed_gart_size_msg;
+
 void __init gart_iommu_hole_init(void)
 {
+	u32 agp_aper_base = 0, agp_aper_order = 0;
 	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base, last_aper_base = 0;
-	int fix, num, valid_agp = 0;
-	int node;
+	int fix, slot, valid_agp = 0;
+	int i, node;
 
 	if (gart_iommu_aperture_disabled || !fix_aperture ||
 	    !early_pci_allowed())
@@ -323,38 +373,65 @@ void __init gart_iommu_hole_init(void)
 
 	printk(KERN_INFO  "Checking aperture...\n");
 
+	if (!fallback_aper_force)
+		agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+
 	fix = 0;
 	node = 0;
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		iommu_detected = 1;
-		gart_iommu_aperture = 1;
-
-		aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
-		aper_size = (32 * 1024 * 1024) << aper_order;
-		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25;
-
-		printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
-				node, aper_base, aper_size >> 20);
-		node++;
-
-		if (!aperture_valid(aper_base, aper_size)) {
-			fix = 1;
-			break;
-		}
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			iommu_detected = 1;
+			gart_iommu_aperture = 1;
+
+			aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+			aper_size = (32 * 1024 * 1024) << aper_order;
+			aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+			aper_base <<= 25;
+
+			printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+					node, aper_base, aper_size >> 20);
+			node++;
+
+			if (!aperture_valid(aper_base, aper_size, 64<<20)) {
+				if (valid_agp && agp_aper_base &&
+				    agp_aper_base == aper_base &&
+				    agp_aper_order == aper_order) {
+					/* the same between two setting from NB and agp */
+					if (!no_iommu &&
+					    max_pfn > MAX_DMA32_PFN &&
+					    !printed_gart_size_msg) {
+						printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
+						printk(KERN_ERR "please increase GART size in your BIOS setup\n");
+						printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
+						printed_gart_size_msg = 1;
+					}
+				} else {
+					fix = 1;
+					goto out;
+				}
+			}
 
-		if ((last_aper_order && aper_order != last_aper_order) ||
-		    (last_aper_base && aper_base != last_aper_base)) {
-			fix = 1;
-			break;
+			if ((last_aper_order && aper_order != last_aper_order) ||
+			    (last_aper_base && aper_base != last_aper_base)) {
+				fix = 1;
+				goto out;
+			}
+			last_aper_order = aper_order;
+			last_aper_base = aper_base;
 		}
-		last_aper_order = aper_order;
-		last_aper_base = aper_base;
 	}
 
+out:
 	if (!fix && !fallback_aper_force) {
 		if (last_aper_base) {
 			unsigned long n = (32 * 1024 * 1024) << last_aper_order;
@@ -364,14 +441,16 @@ void __init gart_iommu_hole_init(void)
 		return;
 	}
 
-	if (!fallback_aper_force)
-		aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+	if (!fallback_aper_force) {
+		aper_alloc = agp_aper_base;
+		aper_order = agp_aper_order;
+	}
 
 	if (aper_alloc) {
 		/* Got the aperture from the AGP bridge */
 	} else if (swiotlb && !valid_agp) {
 		/* Do nothing */
-	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
+	} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
 		   valid_agp ||
 		   fallback_aper_force) {
@@ -401,16 +480,24 @@ void __init gart_iommu_hole_init(void)
 	}
 
 	/* Fix up the north bridges */
-	for (num = 24; num < 32; num++) {
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		/*
-		 * Don't enable translation yet. That is done later.
-		 * Assume this BIOS didn't initialise the GART so
-		 * just overwrite all previous bits
-		 */
-		write_pci_config(0, num, 3, 0x90, aper_order<<1);
-		write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+		int bus;
+		int dev_base, dev_limit;
+
+		bus = bus_dev_ranges[i].bus;
+		dev_base = bus_dev_ranges[i].dev_base;
+		dev_limit = bus_dev_ranges[i].dev_limit;
+		for (slot = dev_base; slot < dev_limit; slot++) {
+			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+				continue;
+
+			/* Don't enable translation yet. That is done later.
+			   Assume this BIOS didn't initialise the GART so
+			   just overwrite all previous bits */
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
+		}
 	}
+
+	set_up_gart_resume(aper_order, aper_alloc);
 }
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 4b99b1bdeb6c..3e58b676d23b 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -52,30 +52,41 @@
 
 unsigned long mp_lapic_addr;
 
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
 /*
  * Knob to control our willingness to enable the local APIC.
  *
- * -1=force-disable, +1=force-enable
+ * +1=force-enable
  */
-static int enable_local_apic __initdata;
+static int force_enable_local_apic;
+int disable_apic;
 
 /* Local APIC timer verification ok */
 static int local_apic_timer_verify_ok;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk
-   or using CPU MSR check */
-int local_apic_timer_disabled;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int local_apic_timer_disabled;
 /* Local APIC timer works in C2 */
 int local_apic_timer_c2_ok;
 EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
 /*
  * Debug level, exported for io_apic.c
  */
 int apic_verbosity;
 
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
+static struct resource lapic_resource = {
+	.name = "Local APIC",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
 static unsigned int calibration_result;
 
 static int lapic_next_event(unsigned long delta,
@@ -545,7 +556,7 @@ void __init setup_boot_APIC_clock(void)
 			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 		else
 			printk(KERN_WARNING "APIC timer registered as dummy,"
-			       " due to nmi_watchdog=1!\n");
+				" due to nmi_watchdog=%d!\n", nmi_watchdog);
 	}
 
 	/* Setup the lapic or request the broadcast */
@@ -963,7 +974,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 */
 	if (!apic_id_registered())
-		BUG();
+		WARN_ON_ONCE(1);
 
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
@@ -1094,7 +1105,7 @@ static int __init detect_init_APIC(void)
 	u32 h, l, features;
 
 	/* Disabled by kernel option? */
-	if (enable_local_apic < 0)
+	if (disable_apic)
 		return -1;
 
 	switch (boot_cpu_data.x86_vendor) {
@@ -1117,7 +1128,7 @@ static int __init detect_init_APIC(void)
 		 * Over-ride BIOS and try to enable the local APIC only if
 		 * "lapic" specified.
 		 */
-		if (enable_local_apic <= 0) {
+		if (!force_enable_local_apic) {
 			printk(KERN_INFO "Local APIC disabled by BIOS -- "
 			       "you can enable it with \"lapic\"\n");
 			return -1;
@@ -1154,9 +1165,6 @@ static int __init detect_init_APIC(void)
 	if (l & MSR_IA32_APICBASE_ENABLE)
 		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
 
-	if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED)
-		nmi_watchdog = NMI_LOCAL_APIC;
-
 	printk(KERN_INFO "Found and enabled local APIC!\n");
 
 	apic_pm_activate();
@@ -1195,36 +1203,6 @@ void __init init_apic_mappings(void)
 	if (boot_cpu_physical_apicid == -1U)
 		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 
-#ifdef CONFIG_X86_IO_APIC
-	{
-		unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-		int i;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			if (smp_found_config) {
-				ioapic_phys = mp_ioapics[i].mpc_apicaddr;
-				if (!ioapic_phys) {
-					printk(KERN_ERR
-					       "WARNING: bogus zero IO-APIC "
-					       "address found in MPTABLE, "
-					       "disabling IO/APIC support!\n");
-					smp_found_config = 0;
-					skip_ioapic_setup = 1;
-					goto fake_ioapic_page;
-				}
-			} else {
-fake_ioapic_page:
-				ioapic_phys = (unsigned long)
-					      alloc_bootmem_pages(PAGE_SIZE);
-				ioapic_phys = __pa(ioapic_phys);
-			}
-			set_fixmap_nocache(idx, ioapic_phys);
-			printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
-			       __fix_to_virt(idx), ioapic_phys);
-			idx++;
-		}
-	}
-#endif
 }
 
 /*
@@ -1236,7 +1214,7 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-	if (enable_local_apic < 0)
+	if (disable_apic)
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 
 	if (!smp_found_config && !cpu_has_apic)
@@ -1265,10 +1243,14 @@ int __init APIC_init_uniprocessor(void)
 #ifdef CONFIG_CRASH_DUMP
 	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 #endif
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 
 	setup_local_APIC();
 
+#ifdef CONFIG_X86_IO_APIC
+	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+#endif
+		localise_nmi_watchdog();
 	end_local_APIC_setup();
 #ifdef CONFIG_X86_IO_APIC
 	if (smp_found_config)
@@ -1351,13 +1333,13 @@ void __init smp_intr_init(void)
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 	 * IPI, driven by wakeup.
 	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
 
 	/* IPI for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
 
 	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 }
 #endif
 
@@ -1370,15 +1352,15 @@ void __init apic_intr_init(void)
 	smp_intr_init();
 #endif
 	/* self generated IPI for local APIC timer */
-	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
 	/* IPI vectors for APIC spurious and error interrupts */
-	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
 
 	/* thermal monitor LVT interrupt */
 #ifdef CONFIG_X86_MCE_P4THERMAL
-	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
 }
 
@@ -1513,6 +1495,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		 */
 		cpu = 0;
 
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/*
 	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
 	 * but we need to work other dependencies like SMP_SUSPEND etc
@@ -1520,7 +1505,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <ashok.raj@intel.com>
 	 */
-	if (num_processors > 8) {
+	if (max_physical_apicid >= 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {
@@ -1534,9 +1519,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	}
 #ifdef CONFIG_SMP
 	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 
 		cpu_to_apicid[cpu] = apicid;
 		bios_cpu_apicid[cpu] = apicid;
@@ -1703,14 +1688,14 @@ static void apic_pm_activate(void) { }
  */
 static int __init parse_lapic(char *arg)
 {
-	enable_local_apic = 1;
+	force_enable_local_apic = 1;
 	return 0;
 }
 early_param("lapic", parse_lapic);
 
 static int __init parse_nolapic(char *arg)
 {
-	enable_local_apic = -1;
+	disable_apic = 1;
 	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 	return 0;
 }
@@ -1740,3 +1725,21 @@ static int __init apic_set_verbosity(char *str)
 }
 __setup("apic=", apic_set_verbosity);
 
+static int __init lapic_insert_resource(void)
+{
+	if (!apic_phys)
+		return -1;
+
+	/* Put local APIC into the resource map. */
+	lapic_resource.start = apic_phys;
+	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	insert_resource(&iomem_resource, &lapic_resource);
+
+	return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 0633cfd0dc29..1e3d32e27c14 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -43,7 +43,7 @@
 #include <mach_ipi.h>
 #include <mach_apic.h>
 
-int disable_apic_timer __cpuinitdata;
+static int disable_apic_timer __cpuinitdata;
 static int apic_calibrate_pmtmr __initdata;
 int disable_apic;
 
@@ -56,6 +56,9 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
  */
 int apic_verbosity;
 
+/* Have we found an MP table */
+int smp_found_config;
+
 static struct resource lapic_resource = {
 	.name = "Local APIC",
 	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
@@ -87,9 +90,6 @@ static unsigned long apic_phys;
 
 unsigned long mp_lapic_addr;
 
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
 unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
@@ -417,37 +417,13 @@ void __init setup_boot_APIC_clock(void)
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 	else
 		printk(KERN_WARNING "APIC timer registered as dummy,"
-		       " due to nmi_watchdog=1!\n");
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
 
 	setup_APIC_timer();
 }
 
-/*
- * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the
- * C1E flag only in the secondary CPU, so when we detect the wreckage
- * we already have enabled the boot CPU local apic timer. Check, if
- * disable_apic_timer is set and the DUMMY flag is cleared. If yes,
- * set the DUMMY flag again and force the broadcast mode in the
- * clockevents layer.
- */
-static void __cpuinit check_boot_apic_timer_broadcast(void)
-{
-	if (!disable_apic_timer ||
-	    (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY))
-		return;
-
-	printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n");
-	lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY;
-
-	local_irq_enable();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
-			   &boot_cpu_physical_apicid);
-	local_irq_disable();
-}
-
 void __cpuinit setup_secondary_APIC_clock(void)
 {
-	check_boot_apic_timer_broadcast();
 	setup_APIC_timer();
 }
 
@@ -850,7 +826,6 @@ static void __cpuinit lapic_setup_esr(void)
 void __cpuinit end_local_APIC_setup(void)
 {
 	lapic_setup_esr();
-	nmi_watchdog_default();
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
 }
@@ -875,7 +850,7 @@ static int __init detect_init_APIC(void)
 
 void __init early_init_lapic_mapping(void)
 {
-	unsigned long apic_phys;
+	unsigned long phys_addr;
 
 	/*
 	 * If no local APIC can be found then go out
@@ -884,11 +859,11 @@ void __init early_init_lapic_mapping(void)
 	if (!smp_found_config)
 		return;
 
-	apic_phys = mp_lapic_addr;
+	phys_addr = mp_lapic_addr;
 
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-				 APIC_BASE, apic_phys);
+		    APIC_BASE, phys_addr);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
@@ -942,7 +917,9 @@ int __init APIC_init_uniprocessor(void)
 
 	verify_local_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	connect_bsp_APIC();
+
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
 
 	setup_local_APIC();
@@ -954,6 +931,8 @@ int __init APIC_init_uniprocessor(void)
 	if (!skip_ioapic_setup && nr_ioapics)
 		enable_IO_APIC();
 
+	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+		localise_nmi_watchdog();
 	end_local_APIC_setup();
 
 	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
@@ -1021,6 +1000,14 @@ asmlinkage void smp_error_interrupt(void)
 	irq_exit();
 }
 
+/**
+ *  * connect_bsp_APIC - attach the APIC to the interrupt system
+ *   */
+void __init connect_bsp_APIC(void)
+{
+	enable_apic_mode();
+}
+
 void disconnect_bsp_APIC(int virt_wire_setup)
 {
 	/* Go back to Virtual Wire compatibility mode */
@@ -1090,10 +1077,13 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		 */
 		cpu = 0;
 	}
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 
 		cpu_to_apicid[cpu] = apicid;
 		bios_cpu_apicid[cpu] = apicid;
@@ -1269,7 +1259,7 @@ __cpuinit int apic_is_clustered_box(void)
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
 		return 0;
 
-	bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index bf9290e29013..00e6d1370954 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -228,6 +228,7 @@
 #include <linux/suspend.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
+#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender)
 				as->event_tail = 0;
 		}
 		as->events[as->event_head] = event;
-		if ((!as->suser) || (!as->writer))
+		if (!as->suser || !as->writer)
 			continue;
 		switch (event) {
 		case APM_SYS_SUSPEND:
@@ -1396,7 +1397,7 @@ static void apm_mainloop(void)
 
 static int check_apm_user(struct apm_user *as, const char *func)
 {
-	if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
+	if (as == NULL || as->magic != APM_BIOS_MAGIC) {
 		printk(KERN_ERR "apm: %s passed bad filp\n", func);
 		return 1;
 	}
@@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait)
 	return 0;
 }
 
-static int do_ioctl(struct inode *inode, struct file *filp,
-		    u_int cmd, u_long arg)
+static long do_ioctl(struct file *filp, u_int cmd, u_long arg)
 {
 	struct apm_user *as;
+	int ret;
 
 	as = filp->private_data;
 	if (check_apm_user(as, "ioctl"))
 		return -EIO;
-	if ((!as->suser) || (!as->writer))
+	if (!as->suser || !as->writer)
 		return -EPERM;
 	switch (cmd) {
 	case APM_IOC_STANDBY:
+		lock_kernel();
 		if (as->standbys_read > 0) {
 			as->standbys_read--;
 			as->standbys_pending--;
@@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp,
 			queue_event(APM_USER_STANDBY, as);
 		if (standbys_pending <= 0)
 			standby();
+		unlock_kernel();
 		break;
 	case APM_IOC_SUSPEND:
+		lock_kernel();
 		if (as->suspends_read > 0) {
 			as->suspends_read--;
 			as->suspends_pending--;
@@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp,
 		} else
 			queue_event(APM_USER_SUSPEND, as);
 		if (suspends_pending <= 0) {
-			return suspend(1);
+			ret = suspend(1);
 		} else {
 			as->suspend_wait = 1;
 			wait_event_interruptible(apm_suspend_waitqueue,
 					as->suspend_wait == 0);
-			return as->suspend_result;
+			ret = as->suspend_result;
 		}
-		break;
+		unlock_kernel();
+		return ret;
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 	}
 	return 0;
 }
@@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = {
 	.owner		= THIS_MODULE,
 	.read		= do_read,
 	.poll		= do_poll,
-	.ioctl		= do_ioctl,
+	.unlocked_ioctl	= do_ioctl,
 	.open		= do_open,
 	.release	= do_release,
 };
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 92588083950f..6649d09ad88f 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -111,7 +111,7 @@ void foo(void)
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
+	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 #endif
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index f126c05d6170..bacf5deeec2d 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -34,7 +34,7 @@ int main(void)
 	ENTRY(pid);
 	BLANK();
 #undef ENTRY
-#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry))
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
 	ENTRY(flags);
 	ENTRY(addr_limit);
 	ENTRY(preempt_count);
@@ -61,8 +61,11 @@ int main(void)
 	OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops);
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
+	OFFSET(PV_IRQ_adjust_exception_frame, pv_irq_ops, adjust_exception_frame);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
+	OFFSET(PV_CPU_usergs_sysret32, pv_cpu_ops, usergs_sysret32);
+	OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64);
+	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
 	OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs);
 	OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
 #endif
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index a0c6f8190887..ee76eaad3001 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -6,11 +6,15 @@ obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o feature_names.o
 
 obj-$(CONFIG_X86_32)	+= common.o bugs.o
+obj-$(CONFIG_X86_64)	+= common_64.o bugs_64.o
 obj-$(CONFIG_X86_32)	+= amd.o
+obj-$(CONFIG_X86_64)	+= amd_64.o
 obj-$(CONFIG_X86_32)	+= cyrix.o
 obj-$(CONFIG_X86_32)	+= centaur.o
+obj-$(CONFIG_X86_64)	+= centaur_64.o
 obj-$(CONFIG_X86_32)	+= transmeta.o
 obj-$(CONFIG_X86_32)	+= intel.o
+obj-$(CONFIG_X86_64)	+= intel_64.o
 obj-$(CONFIG_X86_32)	+= umc.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index c2e1ce33c7cb..84a8220a6072 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -1,9 +1,7 @@
-
 /*
  *	Routines to indentify additional cpu features that are scattered in
  *	cpuid space.
  */
-
 #include <linux/cpu.h>
 
 #include <asm/pat.h>
@@ -53,19 +51,20 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_PAT
 void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 {
+	if (!cpu_has_pat)
+		pat_disable("PAT not supported by CPU.");
+
 	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		if (c->x86 >= 0xf && c->x86 <= 0x11)
-			return;
-		break;
 	case X86_VENDOR_INTEL:
 		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
 			return;
 		break;
+	case X86_VENDOR_AMD:
+	case X86_VENDOR_CENTAUR:
+	case X86_VENDOR_TRANSMETA:
+		return;
 	}
 
-	pat_disable(cpu_has_pat ?
-		    "PAT disabled. Not yet verified on this CPU type." :
-		    "PAT not supported by CPU.");
+	pat_disable("PAT disabled. Not yet verified on this CPU type.");
 }
 #endif
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 245866828294..81a07ca65d44 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -24,43 +24,6 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-#ifdef CONFIG_X86_LOCAL_APIC
-#define ENABLE_C1E_MASK         0x18000000
-#define CPUID_PROCESSOR_SIGNATURE       1
-#define CPUID_XFAM              0x0ff00000
-#define CPUID_XFAM_K8           0x00000000
-#define CPUID_XFAM_10H          0x00100000
-#define CPUID_XFAM_11H          0x00200000
-#define CPUID_XMOD              0x000f0000
-#define CPUID_XMOD_REV_F        0x00040000
-
-/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
-static __cpuinit int amd_apic_timer_broken(void)
-{
-	u32 lo, hi;
-	u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-	switch (eax & CPUID_XFAM) {
-	case CPUID_XFAM_K8:
-		if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
-			break;
-	case CPUID_XFAM_10H:
-	case CPUID_XFAM_11H:
-		rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
-		if (lo & ENABLE_C1E_MASK) {
-			if (smp_processor_id() != boot_cpu_physical_apicid)
-				printk(KERN_INFO "AMD C1E detected late. "
-				       "	Force timer broadcast.\n");
-			return 1;
-		}
-		break;
-	default:
-		/* err on the side of caution */
-		return 1;
-	}
-	return 0;
-}
-#endif
-
 int force_mwait __cpuinitdata;
 
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
@@ -297,11 +260,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 			num_cache_leaves = 3;
 	}
 
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (amd_apic_timer_broken())
-		local_apic_timer_disabled = 1;
-#endif
-
 	/* K6s reports MCEs but don't actually have all the MSRs */
 	if (c->x86 < 6)
 		clear_cpu_cap(c, X86_FEATURE_MCE);
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
new file mode 100644
index 000000000000..7c36fb8a28d4
--- /dev/null
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -0,0 +1,222 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/numa_64.h>
+#include <asm/mmconfig.h>
+#include <asm/cacheflush.h>
+
+#include <mach_apic.h>
+
+#include "cpu.h"
+
+int force_mwait __cpuinitdata;
+
+#ifdef CONFIG_NUMA
+static int __cpuinit nearby_node(int apicid)
+{
+	int i, node;
+
+	for (i = apicid - 1; i >= 0; i--) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+		node = apicid_to_node[i];
+		if (node != NUMA_NO_NODE && node_online(node))
+			return node;
+	}
+	return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned bits;
+#ifdef CONFIG_NUMA
+	int cpu = smp_processor_id();
+	int node = 0;
+	unsigned apicid = hard_smp_processor_id();
+#endif
+	bits = c->x86_coreid_bits;
+
+	/* Low order bits define the core id (index of core in socket) */
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
+
+#ifdef CONFIG_NUMA
+	node = c->phys_proc_id;
+	if (apicid_to_node[apicid] != NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+	if (!node_online(node)) {
+		/* Two possibilities here:
+		   - The CPU is missing memory and no node was created.
+		   In that case try picking one from a nearby CPU
+		   - The APIC IDs differ from the HyperTransport node IDs
+		   which the K8 northbridge parsing fills in.
+		   Assume they are all increased by a constant offset,
+		   but in the same order as the HT nodeids.
+		   If that doesn't result in a usable node fall back to the
+		   path for the previous case.  */
+
+		int ht_nodeid = c->initial_apicid;
+
+		if (ht_nodeid >= 0 &&
+		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+			node = apicid_to_node[ht_nodeid];
+		/* Pick a nearby node */
+		if (!node_online(node))
+			node = nearby_node(apicid);
+	}
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	unsigned bits, ecx;
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level < 0x80000008)
+		return;
+
+	ecx = cpuid_ecx(0x80000008);
+
+	c->x86_max_cores = (ecx & 0xff) + 1;
+
+	/* CPU telling us the core id bits shift? */
+	bits = (ecx >> 12) & 0xF;
+
+	/* Otherwise recompute */
+	if (bits == 0) {
+		while ((1 << bits) < c->x86_max_cores)
+			bits++;
+	}
+
+	c->x86_coreid_bits = bits;
+
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	early_init_amd_mc(c);
+
+	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+	if (c->x86_power & (1<<8))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
+	unsigned level;
+
+#ifdef CONFIG_SMP
+	unsigned long value;
+
+	/*
+	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
+	 * bit 6 of msr C001_0015
+	 *
+	 * Errata 63 for SH-B3 steppings
+	 * Errata 122 for all steppings (F+ have it disabled by default)
+	 */
+	if (c->x86 == 0xf) {
+		rdmsrl(MSR_K8_HWCR, value);
+		value |= 1 << 6;
+		wrmsrl(MSR_K8_HWCR, value);
+	}
+#endif
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_cpu_cap(c, 0*32+31);
+
+	/* On C+ stepping K8 rep microcode works well for copy/memset */
+	if (c->x86 == 0xf) {
+		level = cpuid_eax(1);
+		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	}
+	if (c->x86 == 0x10 || c->x86 == 0x11)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+	/* Enable workaround for FXSAVE leak */
+	if (c->x86 >= 6)
+		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
+
+	level = get_model_name(c);
+	if (!level) {
+		switch (c->x86) {
+		case 0xf:
+			/* Should distinguish Models here, but this is only
+			   a fallback anyways. */
+			strcpy(c->x86_model_id, "Hammer");
+			break;
+		}
+	}
+	display_cacheinfo(c);
+
+	/* Multi core CPU? */
+	if (c->extended_cpuid_level >= 0x80000008)
+		amd_detect_cmp(c);
+
+	if (c->extended_cpuid_level >= 0x80000006 &&
+		(cpuid_edx(0x80000006) & 0xf000))
+		num_cache_leaves = 4;
+	else
+		num_cache_leaves = 3;
+
+	if (c->x86 >= 0xf && c->x86 <= 0x11)
+		set_cpu_cap(c, X86_FEATURE_K8);
+
+	/* MFENCE stops RDTSC speculation */
+	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+
+	if (c->x86 == 0x10) {
+		/* do this for boot cpu */
+		if (c == &boot_cpu_data)
+			check_enable_amd_mmconf_dmi();
+
+		fam10h_check_enable_mmcfg();
+	}
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+		    if ((tseg>>PMD_SHIFT) <
+				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+			((tseg>>PMD_SHIFT) <
+				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+		}
+	}
+}
+
+static struct cpu_dev amd_cpu_dev __cpuinitdata = {
+	.c_vendor	= "AMD",
+	.c_ident	= { "AuthenticAMD" },
+	.c_early_init   = early_init_amd,
+	.c_init		= init_amd,
+};
+
+cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 170d2f5523b2..1b1c56bb338f 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -59,8 +59,12 @@ static void __init check_fpu(void)
 		return;
 	}
 
-/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */
-	/* Test for the divl bug.. */
+	/*
+	 * trap_init() enabled FXSR and company _before_ testing for FP
+	 * problems here.
+	 *
+	 * Test for the divl bug..
+	 */
 	__asm__("fninit\n\t"
 		"fldl %1\n\t"
 		"fdivl %2\n\t"
@@ -108,10 +112,15 @@ static void __init check_popad(void)
 	  "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
 	  : "=&a" (res)
 	  : "d" (inp)
-	  : "ecx", "edi" );
-	/* If this fails, it means that any user program may lock the CPU hard. Too bad. */
-	if (res != 12345678) printk( "Buggy.\n" );
-		        else printk( "OK.\n" );
+	  : "ecx", "edi");
+	/*
+	 * If this fails, it means that any user program may lock the
+	 * CPU hard. Too bad.
+	 */
+	if (res != 12345678)
+		printk("Buggy.\n");
+	else
+		printk("OK.\n");
 #endif
 }
 
@@ -137,7 +146,8 @@ static void __init check_config(void)
  * i486+ only features! (WP works in supervisor mode and the
  * new "invlpg" and "bswap" instructions)
  */
-#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
+#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \
+	defined(CONFIG_X86_BSWAP)
 	if (boot_cpu_data.x86 == 3)
 		panic("Kernel requires i486+ for 'invlpg' and other features");
 #endif
@@ -170,6 +180,7 @@ void __init check_bugs(void)
 	check_fpu();
 	check_hlt();
 	check_popad();
-	init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
+	init_utsname()->machine[1] =
+		'0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
 	alternative_instructions();
 }
diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 9a3ed0649d4e..9a3ed0649d4e 100644
--- a/arch/x86/kernel/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c
new file mode 100644
index 000000000000..1d181c40e2e1
--- /dev/null
+++ b/arch/x86/kernel/cpu/centaur_64.c
@@ -0,0 +1,35 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/cpufeature.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x6 && c->x86_model >= 0xf)
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+}
+
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	}
+	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+}
+
+static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
+	.c_vendor	= "Centaur",
+	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
+	.c_init		= init_centaur,
+};
+
+cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d0463a946247..80ab20d4fa39 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -427,7 +427,7 @@ __setup("serialnumber", x86_serial_nr_setup);
 /*
  * This does the hard work of actually picking apart the CPU stuff...
  */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 {
 	int i;
 
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
new file mode 100644
index 000000000000..7b8cc72feb40
--- /dev/null
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -0,0 +1,681 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kgdb.h>
+#include <linux/topology.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/mtrr.h>
+#include <asm/mce.h>
+#include <asm/pat.h>
+#include <asm/numa.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/proto.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/genapic.h>
+
+#include "cpu.h"
+
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types  kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+   Hopefully nobody expects them at a fixed place (Wine?) */
+DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+	struct desc_ptr gdt_descr;
+
+	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+	gdt_descr.size = GDT_SIZE - 1;
+	load_gdt(&gdt_descr);
+}
+
+struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+	display_cacheinfo(c);
+}
+
+static struct cpu_dev __cpuinitdata default_cpu = {
+	.c_init	= default_init,
+	.c_vendor = "Unknown",
+};
+static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
+
+int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+{
+	unsigned int *v;
+
+	if (c->extended_cpuid_level < 0x80000004)
+		return 0;
+
+	v = (unsigned int *) c->x86_model_id;
+	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+	c->x86_model_id[48] = 0;
+	return 1;
+}
+
+
+void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+{
+	unsigned int n, dummy, ebx, ecx, edx;
+
+	n = c->extended_cpuid_level;
+
+	if (n >= 0x80000005) {
+		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
+		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
+		       "D cache %dK (%d bytes/line)\n",
+		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size = (ecx>>24) + (edx>>24);
+		/* On K8 L1 TLB is inclusive, so don't count it */
+		c->x86_tlbsize = 0;
+	}
+
+	if (n >= 0x80000006) {
+		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
+		ecx = cpuid_ecx(0x80000006);
+		c->x86_cache_size = ecx >> 16;
+		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+
+		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+		c->x86_cache_size, ecx & 0xFF);
+	}
+}
+
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+	u32 eax, ebx, ecx, edx;
+	int index_msb, core_bits;
+
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+
+
+	if (!cpu_has(c, X86_FEATURE_HT))
+		return;
+	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+		goto out;
+
+	smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+	if (smp_num_siblings == 1) {
+		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+	} else if (smp_num_siblings > 1) {
+
+		if (smp_num_siblings > NR_CPUS) {
+			printk(KERN_WARNING "CPU: Unsupported number of "
+			       "siblings %d", smp_num_siblings);
+			smp_num_siblings = 1;
+			return;
+		}
+
+		index_msb = get_count_order(smp_num_siblings);
+		c->phys_proc_id = phys_pkg_id(index_msb);
+
+		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+		index_msb = get_count_order(smp_num_siblings);
+
+		core_bits = get_count_order(c->x86_max_cores);
+
+		c->cpu_core_id = phys_pkg_id(index_msb) &
+					       ((1 << core_bits) - 1);
+	}
+out:
+	if ((c->x86_max_cores * smp_num_siblings) > 1) {
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       c->phys_proc_id);
+		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+		       c->cpu_core_id);
+	}
+
+#endif
+}
+
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
+{
+	char *v = c->x86_vendor_id;
+	int i;
+	static int printed;
+
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		if (cpu_devs[i]) {
+			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+			    (cpu_devs[i]->c_ident[1] &&
+			    !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+				c->x86_vendor = i;
+				this_cpu = cpu_devs[i];
+				return;
+			}
+		}
+	}
+	if (!printed) {
+		printed++;
+		printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+		printk(KERN_ERR "CPU: Your system may be unstable.\n");
+	}
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+}
+
+static void __init early_cpu_support_print(void)
+{
+	int i,j;
+	struct cpu_dev *cpu_devx;
+
+	printk("KERNEL supported cpus:\n");
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		cpu_devx = cpu_devs[i];
+		if (!cpu_devx)
+			continue;
+		for (j = 0; j < 2; j++) {
+			if (!cpu_devx->c_ident[j])
+				continue;
+			printk("  %s %s\n", cpu_devx->c_vendor,
+				cpu_devx->c_ident[j]);
+		}
+	}
+}
+
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
+
+void __init early_cpu_init(void)
+{
+        struct cpu_vendor_dev *cvdev;
+
+        for (cvdev = __x86cpuvendor_start ;
+             cvdev < __x86cpuvendor_end   ;
+             cvdev++)
+                cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+	early_cpu_support_print();
+	early_identify_cpu(&boot_cpu_data);
+}
+
+/* Do some early cpuid on the boot CPU to get some parameter that are
+   needed before check_bugs. Everything advanced is in identify_cpu
+   below. */
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
+{
+	u32 tfms, xlvl;
+
+	c->loops_per_jiffy = loops_per_jiffy;
+	c->x86_cache_size = -1;
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
+	c->x86_vendor_id[0] = '\0'; /* Unset */
+	c->x86_model_id[0] = '\0';  /* Unset */
+	c->x86_clflush_size = 64;
+	c->x86_cache_alignment = c->x86_clflush_size;
+	c->x86_max_cores = 1;
+	c->x86_coreid_bits = 0;
+	c->extended_cpuid_level = 0;
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+	/* Get vendor name */
+	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
+	      (unsigned int *)&c->x86_vendor_id[0],
+	      (unsigned int *)&c->x86_vendor_id[8],
+	      (unsigned int *)&c->x86_vendor_id[4]);
+
+	get_cpu_vendor(c);
+
+	/* Initialize the standard set of capabilities */
+	/* Note that the vendor-specific code below might override */
+
+	/* Intel-defined flags: level 0x00000001 */
+	if (c->cpuid_level >= 0x00000001) {
+		__u32 misc;
+		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
+		      &c->x86_capability[0]);
+		c->x86 = (tfms >> 8) & 0xf;
+		c->x86_model = (tfms >> 4) & 0xf;
+		c->x86_mask = tfms & 0xf;
+		if (c->x86 == 0xf)
+			c->x86 += (tfms >> 20) & 0xff;
+		if (c->x86 >= 0x6)
+			c->x86_model += ((tfms >> 16) & 0xF) << 4;
+		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
+			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+	} else {
+		/* Have CPUID level 0 only - unheard of */
+		c->x86 = 4;
+	}
+
+	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
+#ifdef CONFIG_SMP
+	c->phys_proc_id = c->initial_apicid;
+#endif
+	/* AMD-defined flags: level 0x80000001 */
+	xlvl = cpuid_eax(0x80000000);
+	c->extended_cpuid_level = xlvl;
+	if ((xlvl & 0xffff0000) == 0x80000000) {
+		if (xlvl >= 0x80000001) {
+			c->x86_capability[1] = cpuid_edx(0x80000001);
+			c->x86_capability[6] = cpuid_ecx(0x80000001);
+		}
+		if (xlvl >= 0x80000004)
+			get_model_name(c); /* Default name */
+	}
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		/* Don't set x86_cpuid_level here for now to not confuse. */
+		if (xlvl >= 0x80860001)
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+
+	c->extended_cpuid_level = cpuid_eax(0x80000000);
+	if (c->extended_cpuid_level >= 0x80000007)
+		c->x86_power = cpuid_edx(0x80000007);
+
+	if (c->extended_cpuid_level >= 0x80000008) {
+		u32 eax = cpuid_eax(0x80000008);
+
+		c->x86_virt_bits = (eax >> 8) & 0xff;
+		c->x86_phys_bits = eax & 0xff;
+	}
+
+	/* Assume all 64-bit CPUs support 32-bit syscall */
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+
+	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
+	    cpu_devs[c->x86_vendor]->c_early_init)
+		cpu_devs[c->x86_vendor]->c_early_init(c);
+
+	validate_pat_support(c);
+
+	/* early_param could clear that, but recall get it set again */
+	if (disable_apic)
+		clear_cpu_cap(c, X86_FEATURE_APIC);
+}
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+{
+	int i;
+
+	early_identify_cpu(c);
+
+	init_scattered_cpuid_features(c);
+
+	c->apicid = phys_pkg_id(0);
+
+	/*
+	 * Vendor-specific initialization.  In this section we
+	 * canonicalize the feature flags, meaning if there are
+	 * features a certain CPU supports which CPUID doesn't
+	 * tell us, CPUID claiming incorrect flags, or other bugs,
+	 * we handle them here.
+	 *
+	 * At the end of this section, c->x86_capability better
+	 * indicate the features this CPU genuinely supports!
+	 */
+	if (this_cpu->c_init)
+		this_cpu->c_init(c);
+
+	detect_ht(c);
+
+	/*
+	 * On SMP, boot_cpu_data holds the common feature set between
+	 * all CPUs; so make sure that we indicate which features are
+	 * common between the CPUs.  The first time this routine gets
+	 * executed, c == &boot_cpu_data.
+	 */
+	if (c != &boot_cpu_data) {
+		/* AND the already accumulated flags with these */
+		for (i = 0; i < NCAPINTS; i++)
+			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+	}
+
+	/* Clear all flags overriden by options */
+	for (i = 0; i < NCAPINTS; i++)
+		c->x86_capability[i] &= ~cleared_cpu_caps[i];
+
+#ifdef CONFIG_X86_MCE
+	mcheck_init(c);
+#endif
+	select_idle_routine(c);
+
+#ifdef CONFIG_NUMA
+	numa_add_cpu(smp_processor_id());
+#endif
+
+}
+
+void __cpuinit identify_boot_cpu(void)
+{
+	identify_cpu(&boot_cpu_data);
+}
+
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+	BUG_ON(c == &boot_cpu_data);
+	identify_cpu(c);
+	mtrr_ap_init();
+}
+
+static __init int setup_noclflush(char *arg)
+{
+	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
+	return 1;
+}
+__setup("noclflush", setup_noclflush);
+
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
+{
+	if (c->x86_model_id[0])
+		printk(KERN_CONT "%s", c->x86_model_id);
+
+	if (c->x86_mask || c->cpuid_level >= 0)
+		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
+	else
+		printk(KERN_CONT "\n");
+}
+
+static __init int setup_disablecpuid(char *arg)
+{
+	int bit;
+	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
+		setup_clear_cpu_cap(bit);
+	else
+		return 0;
+	return 1;
+}
+__setup("clearcpuid=", setup_disablecpuid);
+
+cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
+
+struct x8664_pda **_cpu_pda __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
+
+struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+
+char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/* noexec=on|off
+Control non executable mappings for 64bit processes.
+
+on	Enable(default)
+off	Disable
+*/
+static int __init nonx_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		do_not_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		do_not_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", nonx_setup);
+
+int force_personality32;
+
+/* noexec32=on|off
+Control non executable heap for 32bit processes.
+To control the stack too use noexec=off
+
+on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
+off	PROT_READ implies PROT_EXEC
+*/
+static int __init nonx32_setup(char *str)
+{
+	if (!strcmp(str, "on"))
+		force_personality32 &= ~READ_IMPLIES_EXEC;
+	else if (!strcmp(str, "off"))
+		force_personality32 |= READ_IMPLIES_EXEC;
+	return 1;
+}
+__setup("noexec32=", nonx32_setup);
+
+void pda_init(int cpu)
+{
+	struct x8664_pda *pda = cpu_pda(cpu);
+
+	/* Setup up data that may be needed in __get_free_pages early */
+	loadsegment(fs, 0);
+	loadsegment(gs, 0);
+	/* Memory clobbers used to order PDA accessed */
+	mb();
+	wrmsrl(MSR_GS_BASE, pda);
+	mb();
+
+	pda->cpunumber = cpu;
+	pda->irqcount = -1;
+	pda->kernelstack = (unsigned long)stack_thread_info() -
+				 PDA_STACKOFFSET + THREAD_SIZE;
+	pda->active_mm = &init_mm;
+	pda->mmu_state = 0;
+
+	if (cpu == 0) {
+		/* others are initialized in smpboot.c */
+		pda->pcurrent = &init_task;
+		pda->irqstackptr = boot_cpu_stack;
+	} else {
+		pda->irqstackptr = (char *)
+			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+		if (!pda->irqstackptr)
+			panic("cannot allocate irqstack for cpu %d", cpu);
+
+		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
+			pda->nodenumber = cpu_to_node(cpu);
+	}
+
+	pda->irqstackptr += IRQSTACKSIZE-64;
+}
+
+char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
+			   DEBUG_STKSZ]
+__attribute__((section(".bss.page_aligned")));
+
+extern asmlinkage void ignore_sysret(void);
+
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
+{
+	/*
+	 * LSTAR and STAR live in a bit strange symbiosis.
+	 * They both write to the same internal register. STAR allows to
+	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
+	 */
+	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
+	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_CSTAR, ignore_sysret);
+
+#ifdef CONFIG_IA32_EMULATION
+	syscall32_cpu_init();
+#endif
+
+	/* Flags to clear on syscall */
+	wrmsrl(MSR_SYSCALL_MASK,
+	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
+}
+
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || do_not_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+unsigned long kernel_eflags;
+
+/*
+ * Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ * A lot of state is already set up in PDA init.
+ */
+void __cpuinit cpu_init(void)
+{
+	int cpu = stack_smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
+	unsigned long v;
+	char *estacks = NULL;
+	struct task_struct *me;
+	int i;
+
+	/* CPU 0 is initialised in head64.c */
+	if (cpu != 0)
+		pda_init(cpu);
+	else
+		estacks = boot_exception_stacks;
+
+	me = current;
+
+	if (cpu_test_and_set(cpu, cpu_initialized))
+		panic("CPU#%d already initialized!\n", cpu);
+
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+	/*
+	 * Initialize the per-CPU GDT with the boot GDT,
+	 * and set up the GDT descriptor:
+	 */
+
+	switch_to_new_gdt();
+	load_idt((const struct desc_ptr *)&idt_descr);
+
+	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+	syscall_init();
+
+	wrmsrl(MSR_FS_BASE, 0);
+	wrmsrl(MSR_KERNEL_GS_BASE, 0);
+	barrier();
+
+	check_efer();
+
+	/*
+	 * set up and load the per-CPU TSS
+	 */
+	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+		static const unsigned int order[N_EXCEPTION_STACKS] = {
+			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		};
+		if (cpu) {
+			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+			if (!estacks)
+				panic("Cannot allocate exception stack %ld %d\n",
+				      v, cpu);
+		}
+		estacks += PAGE_SIZE << order[v];
+		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
+	}
+
+	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+	/*
+	 * <= is required because the CPU will access up to
+	 * 8 bits beyond the end of the IO permission bitmap.
+	 */
+	for (i = 0; i <= IO_BITMAP_LONGS; i++)
+		t->io_bitmap[i] = ~0UL;
+
+	atomic_inc(&init_mm.mm_count);
+	me->active_mm = &init_mm;
+	if (me->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, me);
+
+	load_sp0(t, &current->thread);
+	set_tss_desc(cpu, t);
+	load_TR_desc();
+	load_LDT(&init_mm.context);
+
+#ifdef CONFIG_KGDB
+	/*
+	 * If the kgdb is connected no debug regs should be altered.  This
+	 * is only applicable when KGDB and a KGDB I/O module are built
+	 * into the kernel and you are using early debugging with
+	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+	 */
+	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+		arch_kgdb_ops.correct_hw_break();
+	else {
+#endif
+	/*
+	 * Clear all 6 debug registers:
+	 */
+
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+	set_debugreg(0UL, 6);
+	set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+	/* If the kgdb is connected no debug regs should be altered. */
+	}
+#endif
+
+	fpu_init();
+
+	raw_local_save_flags(kernel_eflags);
+
+	if (is_uv_system())
+		uv_cpu_init();
+}
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 783691b2a738..4d894e8565fe 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -1,3 +1,6 @@
+#ifndef ARCH_X86_CPU_H
+
+#define ARCH_X86_CPU_H
 
 struct cpu_model_info {
 	int vendor;
@@ -36,3 +39,5 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
 
 extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+#endif
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index f03e9153618e..965ea52767ac 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -26,9 +26,10 @@
 #define NFORCE2_SAFE_DISTANCE 50
 
 /* Delay in ms between FSB changes */
-//#define NFORCE2_DELAY 10
+/* #define NFORCE2_DELAY 10 */
 
-/* nforce2_chipset:
+/*
+ * nforce2_chipset:
  * FSB is changed using the chipset
  */
 static struct pci_dev *nforce2_chipset_dev;
@@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev;
 /* fid:
  * multiplier * 10
  */
-static int fid = 0;
+static int fid;
 
 /* min_fsb, max_fsb:
  * minimum and maximum FSB (= FSB at boot time)
  */
-static int min_fsb = 0;
-static int max_fsb = 0;
+static int min_fsb;
+static int max_fsb;
 
 MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
@@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444);
 
 MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
-                 "Minimum FSB to use, if not defined: current FSB - 50");
+		"Minimum FSB to use, if not defined: current FSB - 50");
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
 
@@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 
 	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
 	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-						0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
+						0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
 	if (!nforce2_sub5)
 		return 0;
 
@@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	fsb /= 1000000;
 
 	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 
-	if(bootfsb || !temp)
+	if (bootfsb || !temp)
 		return fsb;
-		
+
 	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
+	pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
 	fsb = nforce2_calc_fsb(temp);
 
 	return fsb;
@@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 	}
 
 	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 	if (!temp) {
 		pll = nforce2_calc_pll(tfsb);
 
@@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb)
 			tfsb--;
 
 		/* Calculate the PLL reg. value */
-		if ((pll = nforce2_calc_pll(tfsb)) == -1)
+		pll = nforce2_calc_pll(tfsb);
+		if (pll == -1)
 			return -EINVAL;
 
 		nforce2_write_pll(pll);
@@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu)
 static int nforce2_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq, unsigned int relation)
 {
-//        unsigned long         flags;
+/*        unsigned long         flags; */
 	struct cpufreq_freqs freqs;
 	unsigned int target_fsb;
 
@@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* Disable IRQs */
-	//local_irq_save(flags);
+	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
 		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
-                       target_fsb);
+			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
-                       target_fsb);
+			target_fsb);
 
 	/* Enable IRQs */
-	//local_irq_restore(flags);
+	/* local_irq_restore(flags); */
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
@@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy)
 		policy->max = (fsb_pol_max + 1) * fid * 100;
 
 	cpufreq_verify_within_limits(policy,
-                                     policy->cpuinfo.min_freq,
-                                     policy->cpuinfo.max_freq);
+				     policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* Set maximum FSB to FSB at boot time */
 	max_fsb = nforce2_fsb_read(1);
 
-	if(!max_fsb)
+	if (!max_fsb)
 		return -EIO;
 
 	if (!min_fsb)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index fe9224c51d37..70609efdf1da 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -226,6 +226,10 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 	if (cpu_has_bts)
 		ds_init_intel(c);
+
+#ifdef CONFIG_X86_NUMAQ
+	numaq_tsc_disable();
+#endif
 }
 
 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c
new file mode 100644
index 000000000000..1019c58d39f0
--- /dev/null
+++ b/arch/x86/kernel/cpu/intel_64.c
@@ -0,0 +1,95 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/topology.h>
+#include <asm/numa_64.h>
+
+#include "cpu.h"
+
+static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
+{
+	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
+	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+}
+
+/*
+ * find out the number of processor cores on the die
+ */
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
+{
+	unsigned int eax, t;
+
+	if (c->cpuid_level < 4)
+		return 1;
+
+	cpuid_count(4, 0, &eax, &t, &t, &t);
+
+	if (eax & 0x1f)
+		return ((eax >> 26) + 1);
+	else
+		return 1;
+}
+
+static void __cpuinit srat_detect_node(void)
+{
+#ifdef CONFIG_NUMA
+	unsigned node;
+	int cpu = smp_processor_id();
+	int apicid = hard_smp_processor_id();
+
+	/* Don't do the funky fallback heuristics the AMD version employs
+	   for now. */
+	node = apicid_to_node[apicid];
+	if (node == NUMA_NO_NODE || !node_online(node))
+		node = first_node(node_online_map);
+	numa_set_node(cpu, node);
+
+	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit init_intel(struct cpuinfo_x86 *c)
+{
+	init_intel_cacheinfo(c);
+	if (c->cpuid_level > 9) {
+		unsigned eax = cpuid_eax(10);
+		/* Check for version and the number of counters */
+		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
+			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
+	}
+
+	if (cpu_has_ds) {
+		unsigned int l1, l2;
+		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
+		if (!(l1 & (1<<11)))
+			set_cpu_cap(c, X86_FEATURE_BTS);
+		if (!(l1 & (1<<12)))
+			set_cpu_cap(c, X86_FEATURE_PEBS);
+	}
+
+
+	if (cpu_has_bts)
+		ds_init_intel(c);
+
+	if (c->x86 == 15)
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+	if (c->x86 == 6)
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+	c->x86_max_cores = intel_num_cpu_cores(c);
+
+	srat_detect_node();
+}
+
+static struct cpu_dev intel_cpu_dev __cpuinitdata = {
+	.c_vendor	= "Intel",
+	.c_ident	= { "GenuineIntel" },
+	.c_early_init   = early_init_intel,
+	.c_init		= init_intel,
+};
+cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
+
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 26d615dcb149..2c8afafa18e8 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata =
 	{ 0x4b, LVL_3,      8192 },	/* 16-way set assoc, 64 byte line size */
 	{ 0x4c, LVL_3,     12288 },	/* 12-way set assoc, 64 byte line size */
 	{ 0x4d, LVL_3,     16384 },	/* 16-way set assoc, 64 byte line size */
+	{ 0x4e, LVL_2,      6144 },	/* 24-way set assoc, 64 byte line size */
 	{ 0x60, LVL_1_DATA, 16 },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x66, LVL_1_DATA, 8 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x67, LVL_1_DATA, 16 },	/* 4-way set assoc, sectored cache, 64 byte line size */
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index e633c9c2b764..f390c9f66351 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -9,23 +9,23 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
 #include "mce.h"
 
 /* Machine Check Handler For AMD Athlon/Duron */
-static void k7_machine_check(struct pt_regs * regs, long error_code)
+static void k7_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover=1;
+	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
 	int i;
 
-	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover=0;
+		recover = 0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
@@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code)
 	}
 
 	if (recover&2)
-		panic ("CPU context corrupt");
+		panic("CPU context corrupt");
 	if (recover&1)
-		panic ("Unable to continue");
-	printk (KERN_EMERG "Attempting to continue.\n");
+		panic("Unable to continue");
+	printk(KERN_EMERG "Attempting to continue.\n");
 	mcgstl &= ~(1<<2);
-	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
@@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c)
 	machine_check_vector = k7_machine_check;
 	wmb();
 
-	printk (KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	printk(KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
-		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
 	/* Clear status for MC index 0 separately, we don't touch CTL,
 	 * as some K7 Athlons cause spurious MCEs when its enabled. */
 	if (boot_cpu_data.x86 == 6) {
-		wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
 		i = 1;
 	} else
 		i = 0;
-	for (; i<nr_mce_banks; i++) {
-		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	for (; i < nr_mce_banks; i++) {
+		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 	}
 
-	set_in_cr4 (X86_CR4_MCE);
-	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
 		smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index e07e8c068ae0..501ca1cea27d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -31,7 +31,7 @@
 #include <asm/idle.h>
 
 #define MISC_MCELOG_MINOR 227
-#define NR_BANKS 6
+#define NR_SYSFS_BANKS 6
 
 atomic_t mce_entry;
 
@@ -46,7 +46,7 @@ static int mce_dont_init;
  */
 static int tolerant = 1;
 static int banks;
-static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
+static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL };
 static unsigned long notify_user;
 static int rip_msr;
 static int mce_bootlog = -1;
@@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 	barrier();
 
 	for (i = 0; i < banks; i++) {
-		if (!bank[i])
+		if (i < NR_SYSFS_BANKS && !bank[i])
 			continue;
 
 		m.misc = 0;
@@ -444,9 +444,10 @@ static void mce_init(void *dummy)
 
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
 	banks = cap & 0xff;
-	if (banks > NR_BANKS) {
-		printk(KERN_INFO "MCE: warning: using only %d banks\n", banks);
-		banks = NR_BANKS;
+	if (banks > MCE_EXTENDED_BANK) {
+		banks = MCE_EXTENDED_BANK;
+		printk(KERN_INFO "MCE: warning: using only %d banks\n",
+		       MCE_EXTENDED_BANK);
 	}
 	/* Use accurate RIP reporting if available. */
 	if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
@@ -462,7 +463,11 @@ static void mce_init(void *dummy)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 
 	for (i = 0; i < banks; i++) {
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		if (i < NR_SYSFS_BANKS)
+			wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		else
+			wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL);
+
 		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
 	}
 }
@@ -766,7 +771,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 	}								\
 	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
 
-/* TBD should generate these dynamically based on number of available banks */
+/*
+ * TBD should generate these dynamically based on number of available banks.
+ * Have only 6 contol banks in /sysfs until then.
+ */
 ACCESSOR(bank0ctl,bank[0],mce_restart())
 ACCESSOR(bank1ctl,bank[1],mce_restart())
 ACCESSOR(bank2ctl,bank[2],mce_restart())
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index cb03345554a5..eef001ad3bde 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -8,7 +8,7 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -32,12 +32,12 @@ struct intel_mce_extended_msrs {
 	/* u32 *reserved[]; */
 };
 
-static int mce_num_extended_msrs = 0;
+static int mce_num_extended_msrs;
 
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
 static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{	
+{
 	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
 			smp_processor_id());
 	add_taint(TAINT_MACHINE_CHECK);
@@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	 * be some SMM goo which handles it, so we can't even put a handler
 	 * since it might be delivered via SMI already -zwanem.
 	 */
-	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 	h = apic_read(APIC_LVTTHMR);
 	if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
@@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 		return; /* -EBUSY */
 	}
 
-	/* check whether a vector already exists, temporarily masked? */	
+	/* check whether a vector already exists, temporarily masked? */
 	if (h & APIC_VECTOR_MASK) {
 		printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
 				"installed\n",
@@ -104,18 +104,18 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
 	apic_write_around(APIC_LVTTHMR, h);
 
-	rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
 
 	/* ok we're good to go... */
 	vendor_thermal_interrupt = intel_thermal_interrupt;
-	
-	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 
-	l = apic_read (APIC_LVTTHMR);
-	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+
+	l = apic_read(APIC_LVTTHMR);
+	apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
 
 	/* enable thermal throttle processing */
 	atomic_set(&therm_throt_en, 1);
@@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
 {
 	u32 h;
 
-	rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
-	rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
-	rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
-	rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
-	rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
-	rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
-	rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
-	rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
-	rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
-	rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+	rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
+	rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
+	rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
+	rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
+	rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
+	rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
+	rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
+	rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
+	rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
+	rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
 }
 
-static void intel_machine_check(struct pt_regs * regs, long error_code)
+static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover=1;
+	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
 	int i;
 
-	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover=0;
+		recover = 0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
@@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 	}
 
 	if (recover & 2)
-		panic ("CPU context corrupt");
+		panic("CPU context corrupt");
 	if (recover & 1)
-		panic ("Unable to continue");
+		panic("Unable to continue");
 
 	printk(KERN_EMERG "Attempting to continue.\n");
-	/* 
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	/*
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
 	 * for errors if the OS could not log the error.
 	 */
-	for (i=0; i<nr_mce_banks; i++) {
+	for (i = 0; i < nr_mce_banks; i++) {
 		u32 msr;
 		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr (msr, low, high);
+		rdmsr(msr, low, high);
 		if (high&(1<<31)) {
 			/* Clear it */
 			wrmsr(msr, 0UL, 0UL);
@@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 		}
 	}
 	mcgstl &= ~(1<<2);
-	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 
@@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
-	
+
 	machine_check_vector = intel_machine_check;
 	wmb();
 
-	printk (KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	printk(KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
-		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	for (i=0; i<nr_mce_banks; i++) {
-		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	for (i = 0; i < nr_mce_banks; i++) {
+		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 	}
 
-	set_in_cr4 (X86_CR4_MCE);
-	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
 		smp_processor_id());
 
 	/* Check for P4/Xeon extended MCE MSRs */
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<9))	{/* MCG_EXT_P */
 		mce_num_extended_msrs = (l >> 16) & 0xff;
-		printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+		printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
 				" available\n",
 			smp_processor_id(), mce_num_extended_msrs);
 
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 5d241ce94a44..509bd3d9eacd 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = {
 static unsigned long smp_changes_mask;
 static struct mtrr_state mtrr_state = {};
 static int mtrr_state_set;
-static u64 tom2;
+u64 mtrr_tom2;
 
 #undef MODULE_PARAM_PREFIX
 #define MODULE_PARAM_PREFIX "mtrr."
@@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 		}
 	}
 
-	if (tom2) {
-		if (start >= (1ULL<<32) && (end < tom2))
+	if (mtrr_tom2) {
+		if (start >= (1ULL<<32) && (end < mtrr_tom2))
 			return MTRR_TYPE_WRBACK;
 	}
 
@@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
 }
 
+/*  fill the MSR pair relating to a var range  */
+void fill_mtrr_var_range(unsigned int index,
+		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
+{
+	struct mtrr_var_range *vr;
+
+	vr = mtrr_state.var_ranges;
+
+	vr[index].base_lo = base_lo;
+	vr[index].base_hi = base_hi;
+	vr[index].mask_lo = mask_lo;
+	vr[index].mask_hi = mask_hi;
+}
+
 static void
 get_fixed_ranges(mtrr_type * frs)
 {
@@ -213,13 +227,13 @@ void __init get_mtrr_state(void)
 	mtrr_state.enabled = (lo & 0xc00) >> 10;
 
 	if (amd_special_default_mtrr()) {
-		unsigned lo, hi;
+		unsigned low, high;
 		/* TOP_MEM2 */
-		rdmsr(MSR_K8_TOP_MEM2, lo, hi);
-		tom2 = hi;
-		tom2 <<= 32;
-		tom2 |= lo;
-		tom2 &= 0xffffff8000000ULL;
+		rdmsr(MSR_K8_TOP_MEM2, low, high);
+		mtrr_tom2 = high;
+		mtrr_tom2 <<= 32;
+		mtrr_tom2 |= low;
+		mtrr_tom2 &= 0xffffff800000ULL;
 	}
 	if (mtrr_show) {
 		int high_width;
@@ -251,9 +265,9 @@ void __init get_mtrr_state(void)
 			else
 				printk(KERN_INFO "MTRR %u disabled\n", i);
 		}
-		if (tom2) {
+		if (mtrr_tom2) {
 			printk(KERN_INFO "TOM2: %016llx aka %lldM\n",
-					  tom2, tom2>>20);
+					  mtrr_tom2, mtrr_tom2>>20);
 		}
 	}
 	mtrr_state_set = 1;
@@ -328,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 
 	if (lo != msrwords[0] || hi != msrwords[1]) {
 		if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		    boot_cpu_data.x86 == 15 &&
+		    (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) &&
 		    ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK))
 			k8_enable_fixed_iorrs();
 		mtrr_wrmsr(msr, msrwords[0], msrwords[1]);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6a1e278d9323..105afe12beb0 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -37,6 +37,7 @@
 #include <linux/smp.h>
 #include <linux/cpu.h>
 #include <linux/mutex.h>
+#include <linux/sort.h>
 
 #include <asm/e820.h>
 #include <asm/mtrr.h>
@@ -609,6 +610,787 @@ static struct sysdev_driver mtrr_sysdev_driver = {
 	.resume		= mtrr_restore,
 };
 
+/* should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM 256
+
+struct res_range {
+	unsigned long start;
+	unsigned long end;
+};
+
+static int __init
+add_range(struct res_range *range, int nr_range, unsigned long start,
+			      unsigned long end)
+{
+	/* out of slots */
+	if (nr_range >= RANGE_NUM)
+		return nr_range;
+
+	range[nr_range].start = start;
+	range[nr_range].end = end;
+
+	nr_range++;
+
+	return nr_range;
+}
+
+static int __init
+add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
+			      unsigned long end)
+{
+	int i;
+
+	/* try to merge it with old one */
+	for (i = 0; i < nr_range; i++) {
+		unsigned long final_start, final_end;
+		unsigned long common_start, common_end;
+
+		if (!range[i].end)
+			continue;
+
+		common_start = max(range[i].start, start);
+		common_end = min(range[i].end, end);
+		if (common_start > common_end + 1)
+			continue;
+
+		final_start = min(range[i].start, start);
+		final_end = max(range[i].end, end);
+
+		range[i].start = final_start;
+		range[i].end =  final_end;
+		return nr_range;
+	}
+
+	/* need to add that */
+	return add_range(range, nr_range, start, end);
+}
+
+static void __init
+subtract_range(struct res_range *range, unsigned long start, unsigned long end)
+{
+	int i, j;
+
+	for (j = 0; j < RANGE_NUM; j++) {
+		if (!range[j].end)
+			continue;
+
+		if (start <= range[j].start && end >= range[j].end) {
+			range[j].start = 0;
+			range[j].end = 0;
+			continue;
+		}
+
+		if (start <= range[j].start && end < range[j].end &&
+		    range[j].start < end + 1) {
+			range[j].start = end + 1;
+			continue;
+		}
+
+
+		if (start > range[j].start && end >= range[j].end &&
+		    range[j].end > start - 1) {
+			range[j].end = start - 1;
+			continue;
+		}
+
+		if (start > range[j].start && end < range[j].end) {
+			/* find the new spare */
+			for (i = 0; i < RANGE_NUM; i++) {
+				if (range[i].end == 0)
+					break;
+			}
+			if (i < RANGE_NUM) {
+				range[i].end = range[j].end;
+				range[i].start = end + 1;
+			} else {
+				printk(KERN_ERR "run of slot in ranges\n");
+			}
+			range[j].end = start - 1;
+			continue;
+		}
+	}
+}
+
+static int __init cmp_range(const void *x1, const void *x2)
+{
+	const struct res_range *r1 = x1;
+	const struct res_range *r2 = x2;
+	long start1, start2;
+
+	start1 = r1->start;
+	start2 = r2->start;
+
+	return start1 - start2;
+}
+
+struct var_mtrr_range_state {
+	unsigned long base_pfn;
+	unsigned long size_pfn;
+	mtrr_type type;
+};
+
+struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static int __initdata debug_print;
+
+static int __init
+x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
+		       unsigned long extra_remove_base,
+		       unsigned long extra_remove_size)
+{
+	unsigned long i, base, size;
+	mtrr_type type;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type != MTRR_TYPE_WRBACK)
+			continue;
+		base = range_state[i].base_pfn;
+		size = range_state[i].size_pfn;
+		nr_range = add_range_with_merge(range, nr_range, base,
+						base + size - 1);
+	}
+	if (debug_print) {
+		printk(KERN_DEBUG "After WB checking\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* take out UC ranges */
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type != MTRR_TYPE_UNCACHABLE)
+			continue;
+		size = range_state[i].size_pfn;
+		if (!size)
+			continue;
+		base = range_state[i].base_pfn;
+		subtract_range(range, base, base + size - 1);
+	}
+	if (extra_remove_size)
+		subtract_range(range, extra_remove_base,
+				 extra_remove_base + extra_remove_size  - 1);
+
+	/* get new range num */
+	nr_range = 0;
+	for (i = 0; i < RANGE_NUM; i++) {
+		if (!range[i].end)
+			continue;
+		nr_range++;
+	}
+	if  (debug_print) {
+		printk(KERN_DEBUG "After UC checking\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* sort the ranges */
+	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+	if  (debug_print) {
+		printk(KERN_DEBUG "After sorting\n");
+		for (i = 0; i < nr_range; i++)
+			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+				 range[i].start, range[i].end + 1);
+	}
+
+	/* clear those is not used */
+	for (i = nr_range; i < RANGE_NUM; i++)
+		memset(&range[i], 0, sizeof(range[i]));
+
+	return nr_range;
+}
+
+static struct res_range __initdata range[RANGE_NUM];
+
+#ifdef CONFIG_MTRR_SANITIZER
+
+static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
+{
+	unsigned long sum;
+	int i;
+
+	sum = 0;
+	for (i = 0; i < nr_range; i++)
+		sum += range[i].end + 1 - range[i].start;
+
+	return sum;
+}
+
+static int enable_mtrr_cleanup __initdata =
+	CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT;
+
+static int __init disable_mtrr_cleanup_setup(char *str)
+{
+	if (enable_mtrr_cleanup != -1)
+		enable_mtrr_cleanup = 0;
+	return 0;
+}
+early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup);
+
+static int __init enable_mtrr_cleanup_setup(char *str)
+{
+	if (enable_mtrr_cleanup != -1)
+		enable_mtrr_cleanup = 1;
+	return 0;
+}
+early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+
+struct var_mtrr_state {
+	unsigned long	range_startk;
+	unsigned long	range_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	gran_sizek;
+	unsigned int	reg;
+};
+
+static void __init
+set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+		unsigned char type, unsigned int address_bits)
+{
+	u32 base_lo, base_hi, mask_lo, mask_hi;
+	u64 base, mask;
+
+	if (!sizek) {
+		fill_mtrr_var_range(reg, 0, 0, 0, 0);
+		return;
+	}
+
+	mask = (1ULL << address_bits) - 1;
+	mask &= ~((((u64)sizek) << 10) - 1);
+
+	base  = ((u64)basek) << 10;
+
+	base |= type;
+	mask |= 0x800;
+
+	base_lo = base & ((1ULL<<32) - 1);
+	base_hi = base >> 32;
+
+	mask_lo = mask & ((1ULL<<32) - 1);
+	mask_hi = mask >> 32;
+
+	fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi);
+}
+
+static void __init
+save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+		unsigned char type)
+{
+	range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
+	range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
+	range_state[reg].type = type;
+}
+
+static void __init
+set_var_mtrr_all(unsigned int address_bits)
+{
+	unsigned long basek, sizek;
+	unsigned char type;
+	unsigned int reg;
+
+	for (reg = 0; reg < num_var_ranges; reg++) {
+		basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10);
+		sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10);
+		type = range_state[reg].type;
+
+		set_var_mtrr(reg, basek, sizek, type, address_bits);
+	}
+}
+
+static unsigned int __init
+range_to_mtrr(unsigned int reg, unsigned long range_startk,
+	      unsigned long range_sizek, unsigned char type)
+{
+	if (!range_sizek || (reg >= num_var_ranges))
+		return reg;
+
+	while (range_sizek) {
+		unsigned long max_align, align;
+		unsigned long sizek;
+
+		/* Compute the maximum size I can make a range */
+		if (range_startk)
+			max_align = ffs(range_startk) - 1;
+		else
+			max_align = 32;
+		align = fls(range_sizek) - 1;
+		if (align > max_align)
+			align = max_align;
+
+		sizek = 1 << align;
+		if (debug_print)
+			printk(KERN_DEBUG "Setting variable MTRR %d, "
+				"base: %ldMB, range: %ldMB, type %s\n",
+				reg, range_startk >> 10, sizek >> 10,
+				(type == MTRR_TYPE_UNCACHABLE)?"UC":
+				    ((type == MTRR_TYPE_WRBACK)?"WB":"Other")
+				);
+		save_var_mtrr(reg++, range_startk, sizek, type);
+		range_startk += sizek;
+		range_sizek -= sizek;
+		if (reg >= num_var_ranges)
+			break;
+	}
+	return reg;
+}
+
+static unsigned __init
+range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
+			unsigned long sizek)
+{
+	unsigned long hole_basek, hole_sizek;
+	unsigned long second_basek, second_sizek;
+	unsigned long range0_basek, range0_sizek;
+	unsigned long range_basek, range_sizek;
+	unsigned long chunk_sizek;
+	unsigned long gran_sizek;
+
+	hole_basek = 0;
+	hole_sizek = 0;
+	second_basek = 0;
+	second_sizek = 0;
+	chunk_sizek = state->chunk_sizek;
+	gran_sizek = state->gran_sizek;
+
+	/* align with gran size, prevent small block used up MTRRs */
+	range_basek = ALIGN(state->range_startk, gran_sizek);
+	if ((range_basek > basek) && basek)
+		return second_sizek;
+	state->range_sizek -= (range_basek - state->range_startk);
+	range_sizek = ALIGN(state->range_sizek, gran_sizek);
+
+	while (range_sizek > state->range_sizek) {
+		range_sizek -= gran_sizek;
+		if (!range_sizek)
+			return 0;
+	}
+	state->range_sizek = range_sizek;
+
+	/* try to append some small hole */
+	range0_basek = state->range_startk;
+	range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
+	if (range0_sizek == state->range_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
+				range0_basek<<10,
+				(range0_basek + state->range_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, range0_basek,
+				state->range_sizek, MTRR_TYPE_WRBACK);
+		return 0;
+	}
+
+	range0_sizek -= chunk_sizek;
+	if (range0_sizek && sizek) {
+	    while (range0_basek + range0_sizek > (basek + sizek)) {
+		range0_sizek -= chunk_sizek;
+		if (!range0_sizek)
+			break;
+	    }
+	}
+
+	if (range0_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "range0: %016lx - %016lx\n",
+				range0_basek<<10,
+				(range0_basek + range0_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, range0_basek,
+				range0_sizek, MTRR_TYPE_WRBACK);
+
+	}
+
+	range_basek = range0_basek + range0_sizek;
+	range_sizek = chunk_sizek;
+
+	if (range_basek + range_sizek > basek &&
+	    range_basek + range_sizek <= (basek + sizek)) {
+		/* one hole */
+		second_basek = basek;
+		second_sizek = range_basek + range_sizek - basek;
+	}
+
+	/* if last piece, only could one hole near end */
+	if ((second_basek || !basek) &&
+	    range_sizek - (state->range_sizek - range0_sizek) - second_sizek <
+	    (chunk_sizek >> 1)) {
+		/*
+		 * one hole in middle (second_sizek is 0) or at end
+		 * (second_sizek is 0 )
+		 */
+		hole_sizek = range_sizek - (state->range_sizek - range0_sizek)
+				 - second_sizek;
+		hole_basek = range_basek + range_sizek - hole_sizek
+				 - second_sizek;
+	} else {
+		/* fallback for big hole, or several holes */
+		range_sizek = state->range_sizek - range0_sizek;
+		second_basek = 0;
+		second_sizek = 0;
+	}
+
+	if (debug_print)
+		printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10,
+			 (range_basek + range_sizek)<<10);
+	state->reg = range_to_mtrr(state->reg, range_basek, range_sizek,
+					 MTRR_TYPE_WRBACK);
+	if (hole_sizek) {
+		if (debug_print)
+			printk(KERN_DEBUG "hole: %016lx - %016lx\n",
+				 hole_basek<<10, (hole_basek + hole_sizek)<<10);
+		state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek,
+						 MTRR_TYPE_UNCACHABLE);
+
+	}
+
+	return second_sizek;
+}
+
+static void __init
+set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn,
+		   unsigned long size_pfn)
+{
+	unsigned long basek, sizek;
+	unsigned long second_sizek = 0;
+
+	if (state->reg >= num_var_ranges)
+		return;
+
+	basek = base_pfn << (PAGE_SHIFT - 10);
+	sizek = size_pfn << (PAGE_SHIFT - 10);
+
+	/* See if I can merge with the last range */
+	if ((basek <= 1024) ||
+	    (state->range_startk + state->range_sizek == basek)) {
+		unsigned long endk = basek + sizek;
+		state->range_sizek = endk - state->range_startk;
+		return;
+	}
+	/* Write the range mtrrs */
+	if (state->range_sizek != 0)
+		second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
+
+	/* Allocate an msr */
+	state->range_startk = basek + second_sizek;
+	state->range_sizek  = sizek - second_sizek;
+}
+
+/* mininum size of mtrr block that can take hole */
+static u64 mtrr_chunk_size __initdata = (256ULL<<20);
+
+static int __init parse_mtrr_chunk_size_opt(char *p)
+{
+	if (!p)
+		return -EINVAL;
+	mtrr_chunk_size = memparse(p, &p);
+	return 0;
+}
+early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
+
+/* granity of mtrr of block */
+static u64 mtrr_gran_size __initdata;
+
+static int __init parse_mtrr_gran_size_opt(char *p)
+{
+	if (!p)
+		return -EINVAL;
+	mtrr_gran_size = memparse(p, &p);
+	return 0;
+}
+early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
+
+static int nr_mtrr_spare_reg __initdata =
+				 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
+
+static int __init parse_mtrr_spare_reg(char *arg)
+{
+	if (arg)
+		nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
+
+static int __init
+x86_setup_var_mtrrs(struct res_range *range, int nr_range,
+		    u64 chunk_size, u64 gran_size)
+{
+	struct var_mtrr_state var_state;
+	int i;
+	int num_reg;
+
+	var_state.range_startk	= 0;
+	var_state.range_sizek	= 0;
+	var_state.reg		= 0;
+	var_state.chunk_sizek	= chunk_size >> 10;
+	var_state.gran_sizek	= gran_size >> 10;
+
+	memset(range_state, 0, sizeof(range_state));
+
+	/* Write the range etc */
+	for (i = 0; i < nr_range; i++)
+		set_var_mtrr_range(&var_state, range[i].start,
+				   range[i].end - range[i].start + 1);
+
+	/* Write the last range */
+	if (var_state.range_sizek != 0)
+		range_to_mtrr_with_hole(&var_state, 0, 0);
+
+	num_reg = var_state.reg;
+	/* Clear out the extra MTRR's */
+	while (var_state.reg < num_var_ranges) {
+		save_var_mtrr(var_state.reg, 0, 0, 0);
+		var_state.reg++;
+	}
+
+	return num_reg;
+}
+
+struct mtrr_cleanup_result {
+	unsigned long gran_sizek;
+	unsigned long chunk_sizek;
+	unsigned long lose_cover_sizek;
+	unsigned int num_reg;
+	int bad;
+};
+
+/*
+ * gran_size: 1M, 2M, ..., 2G
+ * chunk size: gran_size, ..., 4G
+ * so we need (2+13)*6
+ */
+#define NUM_RESULT	90
+#define PSHIFT		(PAGE_SHIFT - 10)
+
+static struct mtrr_cleanup_result __initdata result[NUM_RESULT];
+static struct res_range __initdata range_new[RANGE_NUM];
+static unsigned long __initdata min_loss_pfn[RANGE_NUM];
+
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+	unsigned long extra_remove_base, extra_remove_size;
+	unsigned long i, base, size, def, dummy;
+	mtrr_type type;
+	int nr_range, nr_range_new;
+	u64 chunk_size, gran_size;
+	unsigned long range_sums, range_sums_new;
+	int index_good;
+	int num_reg_good;
+
+	/* extra one for all 0 */
+	int num[MTRR_NUM_TYPES + 1];
+
+	if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
+		return 0;
+	rdmsr(MTRRdefType_MSR, def, dummy);
+	def &= 0xff;
+	if (def != MTRR_TYPE_UNCACHABLE)
+		return 0;
+
+	/* get it and store it aside */
+	memset(range_state, 0, sizeof(range_state));
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i, &base, &size, &type);
+		range_state[i].base_pfn = base;
+		range_state[i].size_pfn = size;
+		range_state[i].type = type;
+	}
+
+	/* check entries number */
+	memset(num, 0, sizeof(num));
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		size = range_state[i].size_pfn;
+		if (type >= MTRR_NUM_TYPES)
+			continue;
+		if (!size)
+			type = MTRR_NUM_TYPES;
+		num[type]++;
+	}
+
+	/* check if we got UC entries */
+	if (!num[MTRR_TYPE_UNCACHABLE])
+		return 0;
+
+	/* check if we only had WB and UC */
+	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+		num_var_ranges - num[MTRR_NUM_TYPES])
+		return 0;
+
+	memset(range, 0, sizeof(range));
+	extra_remove_size = 0;
+	if (mtrr_tom2) {
+		extra_remove_base = 1 << (32 - PAGE_SHIFT);
+		extra_remove_size =
+			(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
+	}
+	nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
+					  extra_remove_size);
+	range_sums = sum_ranges(range, nr_range);
+	printk(KERN_INFO "total RAM coverred: %ldM\n",
+	       range_sums >> (20 - PAGE_SHIFT));
+
+	if (mtrr_chunk_size && mtrr_gran_size) {
+		int num_reg;
+
+		debug_print = 1;
+		/* convert ranges to var ranges state */
+		num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size,
+					      mtrr_gran_size);
+
+		/* we got new setting in range_state, check it */
+		memset(range_new, 0, sizeof(range_new));
+		nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+						      extra_remove_base,
+						      extra_remove_size);
+		range_sums_new = sum_ranges(range_new, nr_range_new);
+
+		i = 0;
+		result[i].chunk_sizek = mtrr_chunk_size >> 10;
+		result[i].gran_sizek = mtrr_gran_size >> 10;
+		result[i].num_reg = num_reg;
+		if (range_sums < range_sums_new) {
+			result[i].lose_cover_sizek =
+				(range_sums_new - range_sums) << PSHIFT;
+			result[i].bad = 1;
+		} else
+			result[i].lose_cover_sizek =
+				(range_sums - range_sums_new) << PSHIFT;
+
+		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+			 result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10,
+			 result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ldM \n",
+			 result[i].num_reg, result[i].bad?"-":"",
+			 result[i].lose_cover_sizek >> 10);
+		if (!result[i].bad) {
+			set_var_mtrr_all(address_bits);
+			return 1;
+		}
+		printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
+		       "will find optimal one\n");
+		debug_print = 0;
+		memset(result, 0, sizeof(result[0]));
+	}
+
+	i = 0;
+	memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn));
+	memset(result, 0, sizeof(result));
+	for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) {
+		for (chunk_size = gran_size; chunk_size < (1ULL<<33);
+		     chunk_size <<= 1) {
+			int num_reg;
+
+			if (debug_print)
+				printk(KERN_INFO
+			       "\ngran_size: %lldM   chunk_size_size: %lldM\n",
+				       gran_size >> 20, chunk_size >> 20);
+			if (i >= NUM_RESULT)
+				continue;
+
+			/* convert ranges to var ranges state */
+			num_reg = x86_setup_var_mtrrs(range, nr_range,
+							 chunk_size, gran_size);
+
+			/* we got new setting in range_state, check it */
+			memset(range_new, 0, sizeof(range_new));
+			nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+					 extra_remove_base, extra_remove_size);
+			range_sums_new = sum_ranges(range_new, nr_range_new);
+
+			result[i].chunk_sizek = chunk_size >> 10;
+			result[i].gran_sizek = gran_size >> 10;
+			result[i].num_reg = num_reg;
+			if (range_sums < range_sums_new) {
+				result[i].lose_cover_sizek =
+					(range_sums_new - range_sums) << PSHIFT;
+				result[i].bad = 1;
+			} else
+				result[i].lose_cover_sizek =
+					(range_sums - range_sums_new) << PSHIFT;
+
+			/* double check it */
+			if (!result[i].bad && !result[i].lose_cover_sizek) {
+				if (nr_range_new != nr_range ||
+					memcmp(range, range_new, sizeof(range)))
+						result[i].bad = 1;
+			}
+
+			if (!result[i].bad && (range_sums - range_sums_new <
+					       min_loss_pfn[num_reg])) {
+				min_loss_pfn[num_reg] =
+					range_sums - range_sums_new;
+			}
+			i++;
+		}
+	}
+
+	/* print out all */
+	for (i = 0; i < NUM_RESULT; i++) {
+		printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+		       result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10,
+		       result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n",
+		       result[i].num_reg, result[i].bad?"-":"",
+		       result[i].lose_cover_sizek >> 10);
+	}
+
+	/* try to find the optimal index */
+	if (nr_mtrr_spare_reg >= num_var_ranges)
+		nr_mtrr_spare_reg = num_var_ranges - 1;
+	num_reg_good = -1;
+	for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
+		if (!min_loss_pfn[i]) {
+			num_reg_good = i;
+			break;
+		}
+	}
+
+	index_good = -1;
+	if (num_reg_good != -1) {
+		for (i = 0; i < NUM_RESULT; i++) {
+			if (!result[i].bad &&
+			    result[i].num_reg == num_reg_good &&
+			    !result[i].lose_cover_sizek) {
+				index_good = i;
+				break;
+			}
+		}
+	}
+
+	if (index_good != -1) {
+		printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
+		i = index_good;
+		printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t",
+				result[i].gran_sizek >> 10,
+				result[i].chunk_sizek >> 10);
+		printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n",
+				result[i].num_reg,
+				result[i].lose_cover_sizek >> 10);
+		/* convert ranges to var ranges state */
+		chunk_size = result[i].chunk_sizek;
+		chunk_size <<= 10;
+		gran_size = result[i].gran_sizek;
+		gran_size <<= 10;
+		debug_print = 1;
+		x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
+		set_var_mtrr_all(address_bits);
+		return 1;
+	}
+
+	printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n");
+	printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n");
+
+	return 0;
+}
+#else
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+	return 0;
+}
+#endif
+
+static int __initdata changed_by_mtrr_cleanup;
+
 static int disable_mtrr_trim;
 
 static int __init disable_mtrr_trim_setup(char *str)
@@ -648,6 +1430,19 @@ int __init amd_special_default_mtrr(void)
 	return 0;
 }
 
+static u64 __init real_trim_memory(unsigned long start_pfn,
+				   unsigned long limit_pfn)
+{
+	u64 trim_start, trim_size;
+	trim_start = start_pfn;
+	trim_start <<= PAGE_SHIFT;
+	trim_size = limit_pfn;
+	trim_size <<= PAGE_SHIFT;
+	trim_size -= trim_start;
+
+	return e820_update_range(trim_start, trim_size, E820_RAM,
+				E820_RESERVED);
+}
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
  * @end_pfn: ending page frame number
@@ -663,8 +1458,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 {
 	unsigned long i, base, size, highest_pfn = 0, def, dummy;
 	mtrr_type type;
-	u64 trim_start, trim_size;
+	int nr_range;
+	u64 total_trim_size;
 
+	/* extra one for all 0 */
+	int num[MTRR_NUM_TYPES + 1];
 	/*
 	 * Make sure we only trim uncachable memory on machines that
 	 * support the Intel MTRR architecture:
@@ -676,14 +1474,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	if (amd_special_default_mtrr())
-		return 0;
+	/* get it and store it aside */
+	memset(range_state, 0, sizeof(range_state));
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i, &base, &size, &type);
+		range_state[i].base_pfn = base;
+		range_state[i].size_pfn = size;
+		range_state[i].type = type;
+	}
 
 	/* Find highest cached pfn */
 	for (i = 0; i < num_var_ranges; i++) {
-		mtrr_if->get(i, &base, &size, &type);
+		type = range_state[i].type;
 		if (type != MTRR_TYPE_WRBACK)
 			continue;
+		base = range_state[i].base_pfn;
+		size = range_state[i].size_pfn;
 		if (highest_pfn < base + size)
 			highest_pfn = base + size;
 	}
@@ -698,22 +1504,65 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		return 0;
 	}
 
-	if (highest_pfn < end_pfn) {
+	/* check entries number */
+	memset(num, 0, sizeof(num));
+	for (i = 0; i < num_var_ranges; i++) {
+		type = range_state[i].type;
+		if (type >= MTRR_NUM_TYPES)
+			continue;
+		size = range_state[i].size_pfn;
+		if (!size)
+			type = MTRR_NUM_TYPES;
+		num[type]++;
+	}
+
+	/* no entry for WB? */
+	if (!num[MTRR_TYPE_WRBACK])
+		return 0;
+
+	/* check if we only had WB and UC */
+	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+		num_var_ranges - num[MTRR_NUM_TYPES])
+		return 0;
+
+	memset(range, 0, sizeof(range));
+	nr_range = 0;
+	if (mtrr_tom2) {
+		range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT));
+		range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1;
+		if (highest_pfn < range[nr_range].end + 1)
+			highest_pfn = range[nr_range].end + 1;
+		nr_range++;
+	}
+	nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
+
+	total_trim_size = 0;
+	/* check the head */
+	if (range[0].start)
+		total_trim_size += real_trim_memory(0, range[0].start);
+	/* check the holes */
+	for (i = 0; i < nr_range - 1; i++) {
+		if (range[i].end + 1 < range[i+1].start)
+			total_trim_size += real_trim_memory(range[i].end + 1,
+							    range[i+1].start);
+	}
+	/* check the top */
+	i = nr_range - 1;
+	if (range[i].end + 1 < end_pfn)
+		total_trim_size += real_trim_memory(range[i].end + 1,
+							 end_pfn);
+
+	if (total_trim_size) {
 		printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
-			" all of memory, losing %luMB of RAM.\n",
-			(end_pfn - highest_pfn) >> (20 - PAGE_SHIFT));
+			" all of memory, losing %lluMB of RAM.\n",
+			total_trim_size >> 20);
 
-		WARN_ON(1);
+		if (!changed_by_mtrr_cleanup)
+			WARN_ON(1);
 
 		printk(KERN_INFO "update e820 for mtrr\n");
-		trim_start = highest_pfn;
-		trim_start <<= PAGE_SHIFT;
-		trim_size = end_pfn;
-		trim_size <<= PAGE_SHIFT;
-		trim_size -= trim_start;
-		update_memory_range(trim_start, trim_size, E820_RAM,
-					E820_RESERVED);
 		update_e820();
+
 		return 1;
 	}
 
@@ -729,18 +1578,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
  */
 void __init mtrr_bp_init(void)
 {
+	u32 phys_addr;
 	init_ifs();
 
+	phys_addr = 32;
+
 	if (cpu_has_mtrr) {
 		mtrr_if = &generic_mtrr_ops;
 		size_or_mask = 0xff000000;	/* 36 bits */
 		size_and_mask = 0x00f00000;
+		phys_addr = 36;
 
 		/* This is an AMD specific MSR, but we assume(hope?) that
 		   Intel will implement it to when they extend the address
 		   bus of the Xeon. */
 		if (cpuid_eax(0x80000000) >= 0x80000008) {
-			u32 phys_addr;
 			phys_addr = cpuid_eax(0x80000008) & 0xff;
 			/* CPUID workaround for Intel 0F33/0F34 CPU */
 			if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
@@ -758,6 +1610,7 @@ void __init mtrr_bp_init(void)
 			   don't support PAE */
 			size_or_mask = 0xfff00000;	/* 32 bits */
 			size_and_mask = 0;
+			phys_addr = 32;
 		}
 	} else {
 		switch (boot_cpu_data.x86_vendor) {
@@ -791,8 +1644,15 @@ void __init mtrr_bp_init(void)
 	if (mtrr_if) {
 		set_num_var_ranges();
 		init_table();
-		if (use_intel())
+		if (use_intel()) {
 			get_mtrr_state();
+
+			if (mtrr_cleanup(phys_addr)) {
+				changed_by_mtrr_cleanup = 1;
+				mtrr_if->set_all();
+			}
+
+		}
 	}
 }
 
@@ -829,9 +1689,10 @@ static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
 		return 0;
-	if (use_intel())
-		mtrr_state_warn();
-	else {
+	if (use_intel()) {
+		if (!changed_by_mtrr_cleanup)
+			mtrr_state_warn();
+	} else {
 		/* The CPUs haven't MTRR and seem to not support SMP. They have
 		 * specific drivers, we use a tricky method to support
 		 * suspend/resume for them.
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 2cc77eb6fea3..2dc4ec656b23 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt);
 void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
 void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
 
+void fill_mtrr_var_range(unsigned int index,
+		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 void get_mtrr_state(void);
 
 extern void set_mtrr_ops(struct mtrr_ops * ops);
@@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if;
 #define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
 
 extern unsigned int num_var_ranges;
+extern u64 mtrr_tom2;
 
 void mtrr_state_warn(void);
 const char *mtrr_attrib_to_str(int x);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index f9ae93adffe5..2e9bef6e3aa3 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -1,11 +1,15 @@
-/* local apic based NMI watchdog for various CPUs.
-   This file also handles reservation of performance counters for coordination
-   with other users (like oprofile).
-
-   Note that these events normally don't tick when the CPU idles. This means
-   the frequency varies with CPU load.
-
-   Original code for K7/P6 written by Keith Owens */
+/*
+ * local apic based NMI watchdog for various CPUs.
+ *
+ * This file also handles reservation of performance counters for coordination
+ * with other users (like oprofile).
+ *
+ * Note that these events normally don't tick when the CPU idles. This means
+ * the frequency varies with CPU load.
+ *
+ * Original code for K7/P6 written by Keith Owens
+ *
+ */
 
 #include <linux/percpu.h>
 #include <linux/module.h>
@@ -36,12 +40,16 @@ struct wd_ops {
 
 static const struct wd_ops *wd_ops;
 
-/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
- * offset from MSR_P4_BSU_ESCR0.  It will be the max for all platforms (for now)
+/*
+ * this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
+ * offset from MSR_P4_BSU_ESCR0.
+ *
+ * It will be the max for all platforms (for now)
  */
 #define NMI_MAX_COUNTER_BITS 66
 
-/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
+/*
+ * perfctr_nmi_owner tracks the ownership of the perfctr registers:
  * evtsel_nmi_owner tracks the ownership of the event selection
  * - different performance counters/ event selection may be reserved for
  *   different subsystems this reservation system just tries to coordinate
@@ -73,8 +81,10 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
 	return 0;
 }
 
-/* converts an msr to an appropriate reservation bit */
-/* returns the bit offset of the event selection register */
+/*
+ * converts an msr to an appropriate reservation bit
+ * returns the bit offset of the event selection register
+ */
 static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 {
 	/* returns the bit offset of the event selection register */
@@ -114,6 +124,7 @@ int avail_to_resrv_perfctr_nmi(unsigned int msr)
 
 	return (!test_bit(counter, perfctr_nmi_owner));
 }
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
 
 int reserve_perfctr_nmi(unsigned int msr)
 {
@@ -128,6 +139,7 @@ int reserve_perfctr_nmi(unsigned int msr)
 		return 1;
 	return 0;
 }
+EXPORT_SYMBOL(reserve_perfctr_nmi);
 
 void release_perfctr_nmi(unsigned int msr)
 {
@@ -140,6 +152,7 @@ void release_perfctr_nmi(unsigned int msr)
 
 	clear_bit(counter, perfctr_nmi_owner);
 }
+EXPORT_SYMBOL(release_perfctr_nmi);
 
 int reserve_evntsel_nmi(unsigned int msr)
 {
@@ -154,6 +167,7 @@ int reserve_evntsel_nmi(unsigned int msr)
 		return 1;
 	return 0;
 }
+EXPORT_SYMBOL(reserve_evntsel_nmi);
 
 void release_evntsel_nmi(unsigned int msr)
 {
@@ -166,11 +180,6 @@ void release_evntsel_nmi(unsigned int msr)
 
 	clear_bit(counter, evntsel_nmi_owner);
 }
-
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
-EXPORT_SYMBOL(reserve_perfctr_nmi);
-EXPORT_SYMBOL(release_perfctr_nmi);
-EXPORT_SYMBOL(reserve_evntsel_nmi);
 EXPORT_SYMBOL(release_evntsel_nmi);
 
 void disable_lapic_nmi_watchdog(void)
@@ -181,7 +190,9 @@ void disable_lapic_nmi_watchdog(void)
 		return;
 
 	on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
-	wd_ops->unreserve();
+
+	if (wd_ops)
+		wd_ops->unreserve();
 
 	BUG_ON(atomic_read(&nmi_active) != 0);
 }
@@ -232,8 +243,8 @@ static unsigned int adjust_for_32bit_ctr(unsigned int hz)
 	return retval;
 }
 
-static void
-write_watchdog_counter(unsigned int perfctr_msr, const char *descr, unsigned nmi_hz)
+static void write_watchdog_counter(unsigned int perfctr_msr,
+				const char *descr, unsigned nmi_hz)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
@@ -244,7 +255,7 @@ write_watchdog_counter(unsigned int perfctr_msr, const char *descr, unsigned nmi
 }
 
 static void write_watchdog_counter32(unsigned int perfctr_msr,
-		const char *descr, unsigned nmi_hz)
+				const char *descr, unsigned nmi_hz)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
@@ -254,9 +265,10 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
 
-/* AMD K7/K8/Family10h/Family11h support. AMD keeps this interface
-   nicely stable so there is not much variety */
-
+/*
+ * AMD K7/K8/Family10h/Family11h support.
+ * AMD keeps this interface nicely stable so there is not much variety
+ */
 #define K7_EVNTSEL_ENABLE	(1 << 22)
 #define K7_EVNTSEL_INT		(1 << 20)
 #define K7_EVNTSEL_OS		(1 << 17)
@@ -289,7 +301,7 @@ static int setup_k7_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	return 1;
 }
 
@@ -325,18 +337,19 @@ static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 }
 
 static const struct wd_ops k7_wd_ops = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_k7_watchdog,
-	.rearm = single_msr_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_K7_PERFCTR0,
-	.evntsel = MSR_K7_EVNTSEL0,
-	.checkbit = 1ULL<<47,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_k7_watchdog,
+	.rearm		= single_msr_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_K7_PERFCTR0,
+	.evntsel	= MSR_K7_EVNTSEL0,
+	.checkbit	= 1ULL << 47,
 };
 
-/* Intel Model 6 (PPro+,P2,P3,P-M,Core1) */
-
+/*
+ * Intel Model 6 (PPro+,P2,P3,P-M,Core1)
+ */
 #define P6_EVNTSEL0_ENABLE	(1 << 22)
 #define P6_EVNTSEL_INT		(1 << 20)
 #define P6_EVNTSEL_OS		(1 << 17)
@@ -372,52 +385,58 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	return 1;
 }
 
 static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
-	/* P6 based Pentium M need to re-unmask
+	/*
+	 * P6 based Pentium M need to re-unmask
 	 * the apic vector but it doesn't hurt
 	 * other P6 variant.
-	 * ArchPerfom/Core Duo also needs this */
+	 * ArchPerfom/Core Duo also needs this
+	 */
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	/* P6/ARCH_PERFMON has 32 bit counter write */
 	write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz);
 }
 
 static const struct wd_ops p6_wd_ops = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_p6_watchdog,
-	.rearm = p6_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_P6_PERFCTR0,
-	.evntsel = MSR_P6_EVNTSEL0,
-	.checkbit = 1ULL<<39,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_p6_watchdog,
+	.rearm		= p6_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_P6_PERFCTR0,
+	.evntsel	= MSR_P6_EVNTSEL0,
+	.checkbit	= 1ULL << 39,
 };
 
-/* Intel P4 performance counters. By far the most complicated of all. */
-
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1<<7)
-#define P4_ESCR_EVENT_SELECT(N)	((N)<<25)
-#define P4_ESCR_OS		(1<<3)
-#define P4_ESCR_USR		(1<<2)
-#define P4_CCCR_OVF_PMI0	(1<<26)
-#define P4_CCCR_OVF_PMI1	(1<<27)
-#define P4_CCCR_THRESHOLD(N)	((N)<<20)
-#define P4_CCCR_COMPLEMENT	(1<<19)
-#define P4_CCCR_COMPARE		(1<<18)
-#define P4_CCCR_REQUIRED	(3<<16)
-#define P4_CCCR_ESCR_SELECT(N)	((N)<<13)
-#define P4_CCCR_ENABLE		(1<<12)
-#define P4_CCCR_OVF 		(1<<31)
-
-/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
-   CRU_ESCR0 (with any non-null event selector) through a complemented
-   max threshold. [IA32-Vol3, Section 14.9.9] */
+/*
+ * Intel P4 performance counters.
+ * By far the most complicated of all.
+ */
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1 << 7)
+#define P4_ESCR_EVENT_SELECT(N)	((N) << 25)
+#define P4_ESCR_OS		(1 << 3)
+#define P4_ESCR_USR		(1 << 2)
+#define P4_CCCR_OVF_PMI0	(1 << 26)
+#define P4_CCCR_OVF_PMI1	(1 << 27)
+#define P4_CCCR_THRESHOLD(N)	((N) << 20)
+#define P4_CCCR_COMPLEMENT	(1 << 19)
+#define P4_CCCR_COMPARE		(1 << 18)
+#define P4_CCCR_REQUIRED	(3 << 16)
+#define P4_CCCR_ESCR_SELECT(N)	((N) << 13)
+#define P4_CCCR_ENABLE		(1 << 12)
+#define P4_CCCR_OVF 		(1 << 31)
 
+/*
+ * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ * CRU_ESCR0 (with any non-null event selector) through a complemented
+ * max threshold. [IA32-Vol3, Section 14.9.9]
+ */
 static int setup_p4_watchdog(unsigned nmi_hz)
 {
 	unsigned int perfctr_msr, evntsel_msr, cccr_msr;
@@ -442,7 +461,8 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 #endif
 		ht_num = 0;
 
-	/* performance counters are shared resources
+	/*
+	 * performance counters are shared resources
 	 * assign each hyperthread its own set
 	 * (re-use the ESCR0 register, seems safe
 	 * and keeps the cccr_val the same)
@@ -540,20 +560,21 @@ static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 }
 
 static const struct wd_ops p4_wd_ops = {
-	.reserve = p4_reserve,
-	.unreserve = p4_unreserve,
-	.setup = setup_p4_watchdog,
-	.rearm = p4_rearm,
-	.stop = stop_p4_watchdog,
+	.reserve	= p4_reserve,
+	.unreserve	= p4_unreserve,
+	.setup		= setup_p4_watchdog,
+	.rearm		= p4_rearm,
+	.stop		= stop_p4_watchdog,
 	/* RED-PEN this is wrong for the other sibling */
-	.perfctr = MSR_P4_BPU_PERFCTR0,
-	.evntsel = MSR_P4_BSU_ESCR0,
-	.checkbit = 1ULL<<39,
+	.perfctr	= MSR_P4_BPU_PERFCTR0,
+	.evntsel	= MSR_P4_BSU_ESCR0,
+	.checkbit	= 1ULL << 39,
 };
 
-/* Watchdog using the Intel architected PerfMon. Used for Core2 and hopefully
-   all future Intel CPUs. */
-
+/*
+ * Watchdog using the Intel architected PerfMon.
+ * Used for Core2 and hopefully all future Intel CPUs.
+ */
 #define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
 #define ARCH_PERFMON_NMI_EVENT_UMASK	ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
 
@@ -599,19 +620,19 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 
 	wd->perfctr_msr = perfctr_msr;
 	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
+	wd->cccr_msr = 0;  /* unused */
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
 }
 
 static struct wd_ops intel_arch_wd_ops __read_mostly = {
-	.reserve = single_msr_reserve,
-	.unreserve = single_msr_unreserve,
-	.setup = setup_intel_arch_watchdog,
-	.rearm = p6_rearm,
-	.stop = single_msr_stop_watchdog,
-	.perfctr = MSR_ARCH_PERFMON_PERFCTR1,
-	.evntsel = MSR_ARCH_PERFMON_EVENTSEL1,
+	.reserve	= single_msr_reserve,
+	.unreserve	= single_msr_unreserve,
+	.setup		= setup_intel_arch_watchdog,
+	.rearm		= p6_rearm,
+	.stop		= single_msr_stop_watchdog,
+	.perfctr	= MSR_ARCH_PERFMON_PERFCTR1,
+	.evntsel	= MSR_ARCH_PERFMON_EVENTSEL1,
 };
 
 static void probe_nmi_watchdog(void)
@@ -624,8 +645,10 @@ static void probe_nmi_watchdog(void)
 		wd_ops = &k7_wd_ops;
 		break;
 	case X86_VENDOR_INTEL:
-		/* Work around Core Duo (Yonah) errata AE49 where perfctr1
-		   doesn't have a working enable bit. */
+		/*
+		 * Work around Core Duo (Yonah) errata AE49 where perfctr1
+		 * doesn't have a working enable bit.
+		 */
 		if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) {
 			intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0;
 			intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0;
@@ -636,7 +659,7 @@ static void probe_nmi_watchdog(void)
 		}
 		switch (boot_cpu_data.x86) {
 		case 6:
-			if (boot_cpu_data.x86_model > 0xd)
+			if (boot_cpu_data.x86_model > 13)
 				return;
 
 			wd_ops = &p6_wd_ops;
@@ -697,10 +720,11 @@ int lapic_wd_event(unsigned nmi_hz)
 {
 	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
 	u64 ctr;
+
 	rdmsrl(wd->perfctr_msr, ctr);
-	if (ctr & wd_ops->checkbit) { /* perfctr still running? */
+	if (ctr & wd_ops->checkbit) /* perfctr still running? */
 		return 0;
-	}
+
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
new file mode 100644
index 000000000000..28c29180b380
--- /dev/null
+++ b/arch/x86/kernel/e820.c
@@ -0,0 +1,1390 @@
+/*
+ * Handle the memory map.
+ * The functions here do the job until bootmem takes over.
+ *
+ *  Getting sanitize_e820_map() in sync with i386 version by applying change:
+ *  -  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *     Alex Achenbach <xela@slit.de>, December 2002.
+ *  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <linux/suspend.h>
+#include <linux/firmware-map.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/e820.h>
+#include <asm/proto.h>
+#include <asm/setup.h>
+#include <asm/trampoline.h>
+
+/*
+ * The e820 map is the map that gets modified e.g. with command line parameters
+ * and that is also registered with modifications in the kernel resource tree
+ * with the iomem_resource as parent.
+ *
+ * The e820_saved is directly saved after the BIOS-provided memory map is
+ * copied. It doesn't get modified afterwards. It's registered for the
+ * /sys/firmware/memmap interface.
+ *
+ * That memory map is not modified and is used as base for kexec. The kexec'd
+ * kernel should get the same memory map as the firmware provides. Then the
+ * user can e.g. boot the original kernel with mem=1G while still booting the
+ * next kernel with full memory.
+ */
+struct e820map e820;
+struct e820map e820_saved;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0xaeedbabe;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+/*
+ * This function checks if any part of the range <start,end> is mapped
+ * with type.
+ */
+int
+e820_any_mapped(u64 start, u64 end, unsigned type)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (type && ei->type != type)
+			continue;
+		if (ei->addr >= end || ei->addr + ei->size <= start)
+			continue;
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(e820_any_mapped);
+
+/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(u64 start, u64 end, unsigned type)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (type && ei->type != type)
+			continue;
+		/* is the region (part) in overlap with the current region ?*/
+		if (ei->addr >= end || ei->addr + ei->size <= start)
+			continue;
+
+		/* if the region is at the beginning of <start,end> we move
+		 * start to the end of the region since it's ok until there
+		 */
+		if (ei->addr <= start)
+			start = ei->addr + ei->size;
+		/*
+		 * if start is now at or beyond end, we're done, full
+		 * coverage
+		 */
+		if (start >= end)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Add a memory region to the kernel e820 map.
+ */
+void __init e820_add_region(u64 start, u64 size, int type)
+{
+	int x = e820.nr_map;
+
+	if (x == ARRAY_SIZE(e820.map)) {
+		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+
+	e820.map[x].addr = start;
+	e820.map[x].size = size;
+	e820.map[x].type = type;
+	e820.nr_map++;
+}
+
+void __init e820_print_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
+		       (unsigned long long) e820.map[i].addr,
+		       (unsigned long long)
+		       (e820.map[i].addr + e820.map[i].size));
+		switch (e820.map[i].type) {
+		case E820_RAM:
+		case E820_RESERVED_KERN:
+			printk(KERN_CONT "(usable)\n");
+			break;
+		case E820_RESERVED:
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		case E820_ACPI:
+			printk(KERN_CONT "(ACPI data)\n");
+			break;
+		case E820_NVS:
+			printk(KERN_CONT "(ACPI NVS)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %u\n", e820.map[i].type);
+			break;
+		}
+	}
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries. The following
+ * replaces the original e820 map with a new one, removing overlaps,
+ * and resolving conflicting memory types in favor of highest
+ * numbered type.
+ *
+ * The input parameter biosmap points to an array of 'struct
+ * e820entry' which on entry has elements in the range [0, *pnr_map)
+ * valid, and which has space for up to max_nr_map entries.
+ * On return, the resulting sanitized e820 map entries will be in
+ * overwritten in the same location, starting at biosmap.
+ *
+ * The integer pointed to by pnr_map must be valid on entry (the
+ * current number of valid entries located at biosmap) and will
+ * be updated on return, with the new number of valid entries
+ * (something no more than max_nr_map.)
+ *
+ * The return value from sanitize_e820_map() is zero if it
+ * successfully 'sanitized' the map entries passed in, and is -1
+ * if it did nothing, which can happen if either of (1) it was
+ * only passed one map entry, or (2) any of the input map entries
+ * were invalid (start + size < start, meaning that the size was
+ * so big the described memory range wrapped around through zero.)
+ *
+ *	Visually we're performing the following
+ *	(1,2,3,4 = memory types)...
+ *
+ *	Sample memory map (w/overlaps):
+ *	   ____22__________________
+ *	   ______________________4_
+ *	   ____1111________________
+ *	   _44_____________________
+ *	   11111111________________
+ *	   ____________________33__
+ *	   ___________44___________
+ *	   __________33333_________
+ *	   ______________22________
+ *	   ___________________2222_
+ *	   _________111111111______
+ *	   _____________________11_
+ *	   _________________4______
+ *
+ *	Sanitized equivalent (no overlap):
+ *	   1_______________________
+ *	   _44_____________________
+ *	   ___1____________________
+ *	   ____22__________________
+ *	   ______11________________
+ *	   _________1______________
+ *	   __________3_____________
+ *	   ___________44___________
+ *	   _____________33_________
+ *	   _______________2________
+ *	   ________________1_______
+ *	   _________________4______
+ *	   ___________________2____
+ *	   ____________________33__
+ *	   ______________________4_
+ */
+
+int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
+				int *pnr_map)
+{
+	struct change_member {
+		struct e820entry *pbios; /* pointer to original bios entry */
+		unsigned long long addr; /* address for this change point */
+	};
+	static struct change_member change_point_list[2*E820_X_MAX] __initdata;
+	static struct change_member *change_point[2*E820_X_MAX] __initdata;
+	static struct e820entry *overlap_list[E820_X_MAX] __initdata;
+	static struct e820entry new_bios[E820_X_MAX] __initdata;
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_bios_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+	BUG_ON(old_nr > max_nr_map);
+
+	/* bail out if we find any unreasonable addresses in bios map */
+	for (i = 0; i < old_nr; i++)
+		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i = 0; i < 2 * old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i = 0; i < old_nr; i++)	{
+		if (biosmap[i].size != 0) {
+			change_point[chgidx]->addr = biosmap[i].addr;
+			change_point[chgidx++]->pbios = &biosmap[i];
+			change_point[chgidx]->addr = biosmap[i].addr +
+				biosmap[i].size;
+			change_point[chgidx++]->pbios = &biosmap[i];
+		}
+	}
+	chg_nr = chgidx;
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing)	{
+		still_changing = 0;
+		for (i = 1; i < chg_nr; i++)  {
+			unsigned long long curaddr, lastaddr;
+			unsigned long long curpbaddr, lastpbaddr;
+
+			curaddr = change_point[i]->addr;
+			lastaddr = change_point[i - 1]->addr;
+			curpbaddr = change_point[i]->pbios->addr;
+			lastpbaddr = change_point[i - 1]->pbios->addr;
+
+			/*
+			 * swap entries, when:
+			 *
+			 * curaddr > lastaddr or
+			 * curaddr == lastaddr and curaddr == curpbaddr and
+			 * lastaddr != lastpbaddr
+			 */
+			if (curaddr < lastaddr ||
+			    (curaddr == lastaddr && curaddr == curpbaddr &&
+			     lastaddr != lastpbaddr)) {
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing = 1;
+			}
+		}
+	}
+
+	/* create a new bios memory map, removing overlaps */
+	overlap_entries = 0;	 /* number of entries in the overlap table */
+	new_bios_entry = 0;	 /* index for creating new bios map entries */
+	last_type = 0;		 /* start with undefined memory type */
+	last_addr = 0;		 /* start with 0 as last starting address */
+
+	/* loop through change-points, determining affect on the new bios map */
+	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+		/* keep track of all overlapping bios entries */
+		if (change_point[chgidx]->addr ==
+		    change_point[chgidx]->pbios->addr) {
+			/*
+			 * add map entry to overlap list (> 1 entry
+			 * implies an overlap)
+			 */
+			overlap_list[overlap_entries++] =
+				change_point[chgidx]->pbios;
+		} else {
+			/*
+			 * remove entry from list (order independent,
+			 * so swap with last)
+			 */
+			for (i = 0; i < overlap_entries; i++) {
+				if (overlap_list[i] ==
+				    change_point[chgidx]->pbios)
+					overlap_list[i] =
+						overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/*
+		 * if there are overlapping entries, decide which
+		 * "type" to use (larger value takes precedence --
+		 * 1=usable, 2,3,4,4+=unusable)
+		 */
+		current_type = 0;
+		for (i = 0; i < overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/*
+		 * continue building up new bios map based on this
+		 * information
+		 */
+		if (current_type != last_type)	{
+			if (last_type != 0)	 {
+				new_bios[new_bios_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/*
+				 * move forward only if the new size
+				 * was non-zero
+				 */
+				if (new_bios[new_bios_entry].size != 0)
+					/*
+					 * no more space left for new
+					 * bios entries ?
+					 */
+					if (++new_bios_entry >= max_nr_map)
+						break;
+			}
+			if (current_type != 0)	{
+				new_bios[new_bios_entry].addr =
+					change_point[chgidx]->addr;
+				new_bios[new_bios_entry].type = current_type;
+				last_addr = change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	/* retain count for new bios entries */
+	new_nr = new_bios_entry;
+
+	/* copy new bios mapping into original location */
+	memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+static int __init __append_e820_map(struct e820entry *biosmap, int nr_map)
+{
+	while (nr_map) {
+		u64 start = biosmap->addr;
+		u64 size = biosmap->size;
+		u64 end = start + size;
+		u32 type = biosmap->type;
+
+		/* Overflow in 64 bits? Ignore the memory map. */
+		if (start > end)
+			return -1;
+
+		e820_add_region(start, size, type);
+
+		biosmap++;
+		nr_map--;
+	}
+	return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory.  If we aren't, we'll fake a memory map.
+ */
+static int __init append_e820_map(struct e820entry *biosmap, int nr_map)
+{
+	/* Only one memory region (or negative)? Ignore it */
+	if (nr_map < 2)
+		return -1;
+
+	return __append_e820_map(biosmap, nr_map);
+}
+
+static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
+					u64 size, unsigned old_type,
+					unsigned new_type)
+{
+	int i;
+	u64 real_updated_size = 0;
+
+	BUG_ON(old_type == new_type);
+
+	if (size > (ULLONG_MAX - start))
+		size = ULLONG_MAX - start;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820x->map[i];
+		u64 final_start, final_end;
+		if (ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start &&
+		    (ei->addr + ei->size) <= (start + size)) {
+			ei->type = new_type;
+			real_updated_size += ei->size;
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		e820_add_region(final_start, final_end - final_start,
+					 new_type);
+		real_updated_size += final_end - final_start;
+
+		ei->size -= final_end - final_start;
+		if (ei->addr < final_start)
+			continue;
+		ei->addr = final_end;
+	}
+	return real_updated_size;
+}
+
+u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
+			     unsigned new_type)
+{
+	return e820_update_range_map(&e820, start, size, old_type, new_type);
+}
+
+static u64 __init e820_update_range_saved(u64 start, u64 size,
+					  unsigned old_type, unsigned new_type)
+{
+	return e820_update_range_map(&e820_saved, start, size, old_type,
+				     new_type);
+}
+
+/* make e820 not cover the range */
+u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
+			     int checktype)
+{
+	int i;
+	u64 real_removed_size = 0;
+
+	if (size > (ULLONG_MAX - start))
+		size = ULLONG_MAX - start;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 final_start, final_end;
+
+		if (checktype && ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start &&
+		    (ei->addr + ei->size) <= (start + size)) {
+			real_removed_size += ei->size;
+			memset(ei, 0, sizeof(struct e820entry));
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		real_removed_size += final_end - final_start;
+
+		ei->size -= final_end - final_start;
+		if (ei->addr < final_start)
+			continue;
+		ei->addr = final_end;
+	}
+	return real_removed_size;
+}
+
+void __init update_e820(void)
+{
+	int nr_map;
+
+	nr_map = e820.nr_map;
+	if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
+		return;
+	e820.nr_map = nr_map;
+	printk(KERN_INFO "modified physical RAM map:\n");
+	e820_print_map("modified");
+}
+static void __init update_e820_saved(void)
+{
+	int nr_map;
+
+	nr_map = e820_saved.nr_map;
+	if (sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map), &nr_map))
+		return;
+	e820_saved.nr_map = nr_map;
+}
+#define MAX_GAP_END 0x100000000ull
+/*
+ * Search for a gap in the e820 memory space from start_addr to end_addr.
+ */
+__init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+		unsigned long start_addr, unsigned long long end_addr)
+{
+	unsigned long long last;
+	int i = e820.nr_map;
+	int found = 0;
+
+	last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
+
+	while (--i >= 0) {
+		unsigned long long start = e820.map[i].addr;
+		unsigned long long end = start + e820.map[i].size;
+
+		if (end < start_addr)
+			continue;
+
+		/*
+		 * Since "last" is at most 4GB, we know we'll
+		 * fit in 32 bits if this condition is true
+		 */
+		if (last > end) {
+			unsigned long gap = last - end;
+
+			if (gap >= *gapsize) {
+				*gapsize = gap;
+				*gapstart = end;
+				found = 1;
+			}
+		}
+		if (start < last)
+			last = start;
+	}
+	return found;
+}
+
+/*
+ * Search for the biggest gap in the low 32 bits of the e820
+ * memory space.  We pass this space to PCI to assign MMIO resources
+ * for hotplug or unconfigured devices in.
+ * Hopefully the BIOS let enough space left.
+ */
+__init void e820_setup_gap(void)
+{
+	unsigned long gapstart, gapsize, round;
+	int found;
+
+	gapstart = 0x10000000;
+	gapsize = 0x400000;
+	found  = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
+
+#ifdef CONFIG_X86_64
+	if (!found) {
+		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
+		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
+		       "address range\n"
+		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
+		       "registers may break!\n");
+	}
+#endif
+
+	/*
+	 * See how much we want to round up: start off with
+	 * rounding to the next 1MB area.
+	 */
+	round = 0x100000;
+	while ((gapsize >> 4) > round)
+		round += round;
+	/* Fun with two's complement */
+	pci_mem_start = (gapstart + round) & -round;
+
+	printk(KERN_INFO
+	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
+	       pci_mem_start, gapstart, gapsize);
+}
+
+/**
+ * Because of the size limitation of struct boot_params, only first
+ * 128 E820 memory entries are passed to kernel via
+ * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
+ * linked list of struct setup_data, which is parsed here.
+ */
+void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data)
+{
+	u32 map_len;
+	int entries;
+	struct e820entry *extmap;
+
+	entries = sdata->len / sizeof(struct e820entry);
+	map_len = sdata->len + sizeof(struct setup_data);
+	if (map_len > PAGE_SIZE)
+		sdata = early_ioremap(pa_data, map_len);
+	extmap = (struct e820entry *)(sdata->data);
+	__append_e820_map(extmap, entries);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	if (map_len > PAGE_SIZE)
+		early_iounmap(sdata, map_len);
+	printk(KERN_INFO "extended physical RAM map:\n");
+	e820_print_map("extended");
+}
+
+#if defined(CONFIG_X86_64) || \
+	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+/**
+ * Find the ranges of physical addresses that do not correspond to
+ * e820 RAM areas and mark the corresponding pages as nosave for
+ * hibernation (32 bit) or software suspend and suspend to RAM (64 bit).
+ *
+ * This function requires the e820 map to be sorted and without any
+ * overlapping entries and assumes the first e820 area to be RAM.
+ */
+void __init e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+	int i;
+	unsigned long pfn;
+
+	pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
+	for (i = 1; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+
+		if (pfn < PFN_UP(ei->addr))
+			register_nosave_region(pfn, PFN_UP(ei->addr));
+
+		pfn = PFN_DOWN(ei->addr + ei->size);
+		if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN)
+			register_nosave_region(PFN_UP(ei->addr), pfn);
+
+		if (pfn >= limit_pfn)
+			break;
+	}
+}
+#endif
+
+/*
+ * Early reserved memory areas.
+ */
+#define MAX_EARLY_RES 20
+
+struct early_res {
+	u64 start, end;
+	char name[16];
+	char overlap_ok;
+};
+static struct early_res early_res[MAX_EARLY_RES] __initdata = {
+	{ 0, PAGE_SIZE, "BIOS data page" },	/* BIOS data page */
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE)
+	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
+#endif
+#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	{ PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" },
+	/*
+	 * Has to be in very low memory so we can execute
+	 * real-mode AP code.
+	 */
+	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" },
+#endif
+	{}
+};
+
+static int __init find_overlapped_early(u64 start, u64 end)
+{
+	int i;
+	struct early_res *r;
+
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		r = &early_res[i];
+		if (end > r->start && start < r->end)
+			break;
+	}
+
+	return i;
+}
+
+/*
+ * Drop the i-th range from the early reservation map,
+ * by copying any higher ranges down one over it, and
+ * clearing what had been the last slot.
+ */
+static void __init drop_range(int i)
+{
+	int j;
+
+	for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
+		;
+
+	memmove(&early_res[i], &early_res[i + 1],
+	       (j - 1 - i) * sizeof(struct early_res));
+
+	early_res[j - 1].end = 0;
+}
+
+/*
+ * Split any existing ranges that:
+ *  1) are marked 'overlap_ok', and
+ *  2) overlap with the stated range [start, end)
+ * into whatever portion (if any) of the existing range is entirely
+ * below or entirely above the stated range.  Drop the portion
+ * of the existing range that overlaps with the stated range,
+ * which will allow the caller of this routine to then add that
+ * stated range without conflicting with any existing range.
+ */
+static void __init drop_overlaps_that_are_ok(u64 start, u64 end)
+{
+	int i;
+	struct early_res *r;
+	u64 lower_start, lower_end;
+	u64 upper_start, upper_end;
+	char name[16];
+
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		r = &early_res[i];
+
+		/* Continue past non-overlapping ranges */
+		if (end <= r->start || start >= r->end)
+			continue;
+
+		/*
+		 * Leave non-ok overlaps as is; let caller
+		 * panic "Overlapping early reservations"
+		 * when it hits this overlap.
+		 */
+		if (!r->overlap_ok)
+			return;
+
+		/*
+		 * We have an ok overlap.  We will drop it from the early
+		 * reservation map, and add back in any non-overlapping
+		 * portions (lower or upper) as separate, overlap_ok,
+		 * non-overlapping ranges.
+		 */
+
+		/* 1. Note any non-overlapping (lower or upper) ranges. */
+		strncpy(name, r->name, sizeof(name) - 1);
+
+		lower_start = lower_end = 0;
+		upper_start = upper_end = 0;
+		if (r->start < start) {
+		 	lower_start = r->start;
+			lower_end = start;
+		}
+		if (r->end > end) {
+			upper_start = end;
+			upper_end = r->end;
+		}
+
+		/* 2. Drop the original ok overlapping range */
+		drop_range(i);
+
+		i--;		/* resume for-loop on copied down entry */
+
+		/* 3. Add back in any non-overlapping ranges. */
+		if (lower_end)
+			reserve_early_overlap_ok(lower_start, lower_end, name);
+		if (upper_end)
+			reserve_early_overlap_ok(upper_start, upper_end, name);
+	}
+}
+
+static void __init __reserve_early(u64 start, u64 end, char *name,
+						int overlap_ok)
+{
+	int i;
+	struct early_res *r;
+
+	i = find_overlapped_early(start, end);
+	if (i >= MAX_EARLY_RES)
+		panic("Too many early reservations");
+	r = &early_res[i];
+	if (r->end)
+		panic("Overlapping early reservations "
+		      "%llx-%llx %s to %llx-%llx %s\n",
+		      start, end - 1, name?name:"", r->start,
+		      r->end - 1, r->name);
+	r->start = start;
+	r->end = end;
+	r->overlap_ok = overlap_ok;
+	if (name)
+		strncpy(r->name, name, sizeof(r->name) - 1);
+}
+
+/*
+ * A few early reservtations come here.
+ *
+ * The 'overlap_ok' in the name of this routine does -not- mean it
+ * is ok for these reservations to overlap an earlier reservation.
+ * Rather it means that it is ok for subsequent reservations to
+ * overlap this one.
+ *
+ * Use this entry point to reserve early ranges when you are doing
+ * so out of "Paranoia", reserving perhaps more memory than you need,
+ * just in case, and don't mind a subsequent overlapping reservation
+ * that is known to be needed.
+ *
+ * The drop_overlaps_that_are_ok() call here isn't really needed.
+ * It would be needed if we had two colliding 'overlap_ok'
+ * reservations, so that the second such would not panic on the
+ * overlap with the first.  We don't have any such as of this
+ * writing, but might as well tolerate such if it happens in
+ * the future.
+ */
+void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)
+{
+	drop_overlaps_that_are_ok(start, end);
+	__reserve_early(start, end, name, 1);
+}
+
+/*
+ * Most early reservations come here.
+ *
+ * We first have drop_overlaps_that_are_ok() drop any pre-existing
+ * 'overlap_ok' ranges, so that we can then reserve this memory
+ * range without risk of panic'ing on an overlapping overlap_ok
+ * early reservation.
+ */
+void __init reserve_early(u64 start, u64 end, char *name)
+{
+	drop_overlaps_that_are_ok(start, end);
+	__reserve_early(start, end, name, 0);
+}
+
+void __init free_early(u64 start, u64 end)
+{
+	struct early_res *r;
+	int i;
+
+	i = find_overlapped_early(start, end);
+	r = &early_res[i];
+	if (i >= MAX_EARLY_RES || r->end != end || r->start != start)
+		panic("free_early on not reserved area: %llx-%llx!",
+			 start, end - 1);
+
+	drop_range(i);
+}
+
+void __init early_res_to_bootmem(u64 start, u64 end)
+{
+	int i, count;
+	u64 final_start, final_end;
+
+	count  = 0;
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
+		count++;
+
+	printk(KERN_INFO "(%d early reservations) ==> bootmem\n", count);
+	for (i = 0; i < count; i++) {
+		struct early_res *r = &early_res[i];
+		printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
+			r->start, r->end, r->name);
+		final_start = max(start, r->start);
+		final_end = min(end, r->end);
+		if (final_start >= final_end) {
+			printk(KERN_CONT "\n");
+			continue;
+		}
+		printk(KERN_CONT " ==> [%010llx - %010llx]\n",
+			final_start, final_end);
+		reserve_bootmem_generic(final_start, final_end - final_start,
+				BOOTMEM_DEFAULT);
+	}
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr(u64 *addrp, u64 size, u64 align)
+{
+	int i;
+	u64 addr = *addrp;
+	int changed = 0;
+	struct early_res *r;
+again:
+	i = find_overlapped_early(addr, addr + size);
+	r = &early_res[i];
+	if (i < MAX_EARLY_RES && r->end) {
+		*addrp = addr = round_up(r->end, align);
+		changed = 1;
+		goto again;
+	}
+	return changed;
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)
+{
+	int i;
+	u64 addr = *addrp, last;
+	u64 size = *sizep;
+	int changed = 0;
+again:
+	last = addr + size;
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		struct early_res *r = &early_res[i];
+		if (last > r->start && addr < r->start) {
+			size = r->start - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last > r->end && addr < r->end) {
+			addr = round_up(r->end, align);
+			size = last - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last <= r->end && addr >= r->start) {
+			(*sizep)++;
+			return 0;
+		}
+	}
+	if (changed) {
+		*addrp = addr;
+		*sizep = size;
+	}
+	return changed;
+}
+
+/*
+ * Find a free area with specified alignment in a specific range.
+ */
+u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 addr, last;
+		u64 ei_last;
+
+		if (ei->type != E820_RAM)
+			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
+		if (addr < start)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
+			continue;
+		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
+			;
+		last = addr + size;
+		if (last > ei_last)
+			continue;
+		if (last > end)
+			continue;
+		return addr;
+	}
+	return -1ULL;
+}
+
+/*
+ * Find next free range after *start
+ */
+u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 addr, last;
+		u64 ei_last;
+
+		if (ei->type != E820_RAM)
+			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
+		if (addr < start)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
+			continue;
+		*sizep = ei_last - addr;
+		while (bad_addr_size(&addr, sizep, align) &&
+			addr + *sizep <= ei_last)
+			;
+		last = addr + *sizep;
+		if (last > ei_last)
+			continue;
+		return addr;
+	}
+	return -1UL;
+
+}
+
+/*
+ * pre allocated 4k and reserved it in e820
+ */
+u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+{
+	u64 size = 0;
+	u64 addr;
+	u64 start;
+
+	start = startt;
+	while (size < sizet)
+		start = find_e820_area_size(start, &size, align);
+
+	if (size < sizet)
+		return 0;
+
+	addr = round_down(start + size - sizet, align);
+	e820_update_range(addr, sizet, E820_RAM, E820_RESERVED);
+	e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
+	printk(KERN_INFO "update e820 for early_reserve_e820\n");
+	update_e820();
+	update_e820_saved();
+
+	return addr;
+}
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+#  define MAX_ARCH_PFN		(1ULL<<(36-PAGE_SHIFT))
+# else
+#  define MAX_ARCH_PFN		(1ULL<<(32-PAGE_SHIFT))
+# endif
+#else /* CONFIG_X86_32 */
+# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT
+#endif
+
+/*
+ * Find the highest page frame number we have available
+ */
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
+{
+	int i;
+	unsigned long last_pfn = 0;
+	unsigned long max_arch_pfn = MAX_ARCH_PFN;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		unsigned long start_pfn;
+		unsigned long end_pfn;
+
+		if (ei->type != type)
+			continue;
+
+		start_pfn = ei->addr >> PAGE_SHIFT;
+		end_pfn = (ei->addr + ei->size) >> PAGE_SHIFT;
+
+		if (start_pfn >= limit_pfn)
+			continue;
+		if (end_pfn > limit_pfn) {
+			last_pfn = limit_pfn;
+			break;
+		}
+		if (end_pfn > last_pfn)
+			last_pfn = end_pfn;
+	}
+
+	if (last_pfn > max_arch_pfn)
+		last_pfn = max_arch_pfn;
+
+	printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n",
+			 last_pfn, max_arch_pfn);
+	return last_pfn;
+}
+unsigned long __init e820_end_of_ram_pfn(void)
+{
+	return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
+}
+
+unsigned long __init e820_end_of_low_ram_pfn(void)
+{
+	return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM);
+}
+/*
+ * Finds an active region in the address range from start_pfn to last_pfn and
+ * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
+ */
+int __init e820_find_active_region(const struct e820entry *ei,
+				  unsigned long start_pfn,
+				  unsigned long last_pfn,
+				  unsigned long *ei_startpfn,
+				  unsigned long *ei_endpfn)
+{
+	u64 align = PAGE_SIZE;
+
+	*ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT;
+	*ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT;
+
+	/* Skip map entries smaller than a page */
+	if (*ei_startpfn >= *ei_endpfn)
+		return 0;
+
+	/* Skip if map is outside the node */
+	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
+				    *ei_startpfn >= last_pfn)
+		return 0;
+
+	/* Check for overlaps */
+	if (*ei_startpfn < start_pfn)
+		*ei_startpfn = start_pfn;
+	if (*ei_endpfn > last_pfn)
+		*ei_endpfn = last_pfn;
+
+	return 1;
+}
+
+/* Walk the e820 map and register active regions within a node */
+void __init e820_register_active_regions(int nid, unsigned long start_pfn,
+					 unsigned long last_pfn)
+{
+	unsigned long ei_startpfn;
+	unsigned long ei_endpfn;
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++)
+		if (e820_find_active_region(&e820.map[i],
+					    start_pfn, last_pfn,
+					    &ei_startpfn, &ei_endpfn))
+			add_active_range(nid, ei_startpfn, ei_endpfn);
+}
+
+/*
+ * Find the hole size (in bytes) in the memory range.
+ * @start: starting address of the memory range to scan
+ * @end: ending address of the memory range to scan
+ */
+u64 __init e820_hole_size(u64 start, u64 end)
+{
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long last_pfn = end >> PAGE_SHIFT;
+	unsigned long ei_startpfn, ei_endpfn, ram = 0;
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		if (e820_find_active_region(&e820.map[i],
+					    start_pfn, last_pfn,
+					    &ei_startpfn, &ei_endpfn))
+			ram += ei_endpfn - ei_startpfn;
+	}
+	return end - start - ((u64)ram << PAGE_SHIFT);
+}
+
+static void early_panic(char *msg)
+{
+	early_printk(msg);
+	panic(msg);
+}
+
+static int userdef __initdata;
+
+/* "mem=nopentium" disables the 4MB page tables. */
+static int __init parse_memopt(char *p)
+{
+	u64 mem_size;
+
+	if (!p)
+		return -EINVAL;
+
+#ifdef CONFIG_X86_32
+	if (!strcmp(p, "nopentium")) {
+		setup_clear_cpu_cap(X86_FEATURE_PSE);
+		return 0;
+	}
+#endif
+
+	userdef = 1;
+	mem_size = memparse(p, &p);
+	e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
+
+	return 0;
+}
+early_param("mem", parse_memopt);
+
+static int __init parse_memmap_opt(char *p)
+{
+	char *oldp;
+	u64 start_at, mem_size;
+
+	if (!p)
+		return -EINVAL;
+
+	if (!strcmp(p, "exactmap")) {
+#ifdef CONFIG_CRASH_DUMP
+		/*
+		 * If we are doing a crash dump, we still need to know
+		 * the real mem size before original memory map is
+		 * reset.
+		 */
+		saved_max_pfn = e820_end_of_ram_pfn();
+#endif
+		e820.nr_map = 0;
+		userdef = 1;
+		return 0;
+	}
+
+	oldp = p;
+	mem_size = memparse(p, &p);
+	if (p == oldp)
+		return -EINVAL;
+
+	userdef = 1;
+	if (*p == '@') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_RAM);
+	} else if (*p == '#') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_ACPI);
+	} else if (*p == '$') {
+		start_at = memparse(p+1, &p);
+		e820_add_region(start_at, mem_size, E820_RESERVED);
+	} else
+		e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
+
+	return *p == '\0' ? 0 : -EINVAL;
+}
+early_param("memmap", parse_memmap_opt);
+
+void __init finish_e820_parsing(void)
+{
+	if (userdef) {
+		int nr = e820.nr_map;
+
+		if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
+			early_panic("Invalid user supplied memory map");
+		e820.nr_map = nr;
+
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+		e820_print_map("user");
+	}
+}
+
+static inline const char *e820_type_to_string(int e820_type)
+{
+	switch (e820_type) {
+	case E820_RESERVED_KERN:
+	case E820_RAM:	return "System RAM";
+	case E820_ACPI:	return "ACPI Tables";
+	case E820_NVS:	return "ACPI Non-volatile Storage";
+	default:	return "reserved";
+	}
+}
+
+/*
+ * Mark e820 reserved areas as busy for the resource manager.
+ */
+void __init e820_reserve_resources(void)
+{
+	int i;
+	struct resource *res;
+	u64 end;
+
+	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	for (i = 0; i < e820.nr_map; i++) {
+		end = e820.map[i].addr + e820.map[i].size - 1;
+#ifndef CONFIG_RESOURCES_64BIT
+		if (end > 0x100000000ULL) {
+			res++;
+			continue;
+		}
+#endif
+		res->name = e820_type_to_string(e820.map[i].type);
+		res->start = e820.map[i].addr;
+		res->end = end;
+
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		insert_resource(&iomem_resource, res);
+		res++;
+	}
+
+	for (i = 0; i < e820_saved.nr_map; i++) {
+		struct e820entry *entry = &e820_saved.map[i];
+		firmware_map_add_early(entry->addr,
+			entry->addr + entry->size - 1,
+			e820_type_to_string(entry->type));
+	}
+}
+
+/*
+ * Non-standard memory setup can be specified via this quirk:
+ */
+char * (*arch_memory_setup_quirk)(void);
+
+char *__init default_machine_specific_memory_setup(void)
+{
+	char *who = "BIOS-e820";
+	int new_nr;
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	new_nr = boot_params.e820_entries;
+	sanitize_e820_map(boot_params.e820_map,
+			ARRAY_SIZE(boot_params.e820_map),
+			&new_nr);
+	boot_params.e820_entries = new_nr;
+	if (append_e820_map(boot_params.e820_map, boot_params.e820_entries)
+	  < 0) {
+		u64 mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (boot_params.alt_mem_k
+		    < boot_params.screen_info.ext_mem_k) {
+			mem_size = boot_params.screen_info.ext_mem_k;
+			who = "BIOS-88";
+		} else {
+			mem_size = boot_params.alt_mem_k;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+		e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+	}
+
+	/* In case someone cares... */
+	return who;
+}
+
+char *__init __attribute__((weak)) machine_specific_memory_setup(void)
+{
+	if (arch_memory_setup_quirk) {
+		char *who = arch_memory_setup_quirk();
+
+		if (who)
+			return who;
+	}
+	return default_machine_specific_memory_setup();
+}
+
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __init __attribute__((weak)) memory_setup(void)
+{
+	return machine_specific_memory_setup();
+}
+
+void __init setup_memory_map(void)
+{
+	char *who;
+
+	who = memory_setup();
+	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+	e820_print_map(who);
+}
+
+#ifdef CONFIG_X86_64
+int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
+{
+	int i;
+
+	if (slot < 0 || slot >= e820.nr_map)
+		return -1;
+	for (i = slot; i < e820.nr_map; i++) {
+		if (e820.map[i].type != E820_RAM)
+			continue;
+		break;
+	}
+	if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
+		return -1;
+	*addr = e820.map[i].addr;
+	*size = min_t(u64, e820.map[i].size + e820.map[i].addr,
+		max_pfn << PAGE_SHIFT) - *addr;
+	return i + 1;
+}
+#endif
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
deleted file mode 100644
index ed733e7cf4e6..000000000000
--- a/arch/x86/kernel/e820_32.c
+++ /dev/null
@@ -1,775 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pfn.h>
-#include <linux/uaccess.h>
-#include <linux/suspend.h>
-
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-struct e820map e820;
-struct change_member {
-	struct e820entry *pbios; /* pointer to original bios entry */
-	unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-extern int user_defined_memmap;
-
-static struct resource system_rom_resource = {
-	.name	= "System ROM",
-	.start	= 0xf0000,
-	.end	= 0xfffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource extension_rom_resource = {
-	.name	= "Extension ROM",
-	.start	= 0xe0000,
-	.end	= 0xeffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource adapter_rom_resources[] = { {
-	.name 	= "Adapter ROM",
-	.start	= 0xc8000,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
-	.name 	= "Adapter ROM",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-} };
-
-static struct resource video_rom_resource = {
-	.name 	= "Video ROM",
-	.start	= 0xc0000,
-	.end	= 0xc7fff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-#define ROMSIGNATURE 0xaa55
-
-static int __init romsignature(const unsigned char *rom)
-{
-	const unsigned short * const ptr = (const unsigned short *)rom;
-	unsigned short sig;
-
-	return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
-}
-
-static int __init romchecksum(const unsigned char *rom, unsigned long length)
-{
-	unsigned char sum, c;
-
-	for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
-		sum += c;
-	return !length && !sum;
-}
-
-static void __init probe_roms(void)
-{
-	const unsigned char *rom;
-	unsigned long start, length, upper;
-	unsigned char c;
-	int i;
-
-	/* video rom */
-	upper = adapter_rom_resources[0].start;
-	for (start = video_rom_resource.start; start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		video_rom_resource.start = start;
-
-		if (probe_kernel_address(rom + 2, c) != 0)
-			continue;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = c * 512;
-
-		/* if checksum okay, trust length byte */
-		if (length && romchecksum(rom, length))
-			video_rom_resource.end = start + length - 1;
-
-		request_resource(&iomem_resource, &video_rom_resource);
-		break;
-	}
-
-	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
-	if (start < upper)
-		start = upper;
-
-	/* system rom */
-	request_resource(&iomem_resource, &system_rom_resource);
-	upper = system_rom_resource.start;
-
-	/* check for extension rom (ignore length byte!) */
-	rom = isa_bus_to_virt(extension_rom_resource.start);
-	if (romsignature(rom)) {
-		length = extension_rom_resource.end - extension_rom_resource.start + 1;
-		if (romchecksum(rom, length)) {
-			request_resource(&iomem_resource, &extension_rom_resource);
-			upper = extension_rom_resource.start;
-		}
-	}
-
-	/* check for adapter roms on 2k boundaries */
-	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
-		rom = isa_bus_to_virt(start);
-		if (!romsignature(rom))
-			continue;
-
-		if (probe_kernel_address(rom + 2, c) != 0)
-			continue;
-
-		/* 0 < length <= 0x7f * 512, historically */
-		length = c * 512;
-
-		/* but accept any length that fits if checksum okay */
-		if (!length || start + length > upper || !romchecksum(rom, length))
-			continue;
-
-		adapter_rom_resources[i].start = start;
-		adapter_rom_resources[i].end = start + length - 1;
-		request_resource(&iomem_resource, &adapter_rom_resources[i]);
-
-		start = adapter_rom_resources[i++].end & ~2047UL;
-	}
-}
-
-/*
- * Request address space for all standard RAM and ROM resources
- * and also for regions reported as reserved by the e820.
- */
-void __init init_iomem_resources(struct resource *code_resource,
-		struct resource *data_resource,
-		struct resource *bss_resource)
-{
-	int i;
-
-	probe_roms();
-	for (i = 0; i < e820.nr_map; i++) {
-		struct resource *res;
-#ifndef CONFIG_RESOURCES_64BIT
-		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
-			continue;
-#endif
-		res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		if (request_resource(&iomem_resource, res)) {
-			kfree(res);
-			continue;
-		}
-		if (e820.map[i].type == E820_RAM) {
-			/*
-			 *  We don't know which RAM region contains kernel data,
-			 *  so we try it repeatedly and let the resource manager
-			 *  test it.
-			 */
-			request_resource(res, code_resource);
-			request_resource(res, data_resource);
-			request_resource(res, bss_resource);
-#ifdef CONFIG_KEXEC
-			if (crashk_res.start != crashk_res.end)
-				request_resource(res, &crashk_res);
-#endif
-		}
-	}
-}
-
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-/**
- * e820_mark_nosave_regions - Find the ranges of physical addresses that do not
- * correspond to e820 RAM areas and mark the corresponding pages as nosave for
- * hibernation.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
-	int i;
-	unsigned long pfn;
-
-	pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
-	for (i = 1; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (pfn < PFN_UP(ei->addr))
-			register_nosave_region(pfn, PFN_UP(ei->addr));
-
-		pfn = PFN_DOWN(ei->addr + ei->size);
-		if (ei->type != E820_RAM)
-			register_nosave_region(PFN_UP(ei->addr), pfn);
-
-		if (pfn >= max_low_pfn)
-			break;
-	}
-}
-#endif
-
-void __init add_memory_region(unsigned long long start,
-			      unsigned long long size, int type)
-{
-	int x;
-
-	x = e820.nr_map;
-
-	if (x == E820MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
-} /* add_memory_region */
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries.  The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following (1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2) {
-		return -1;
-	}
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i=0; i<old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) {
-			return -1;
-		}
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i=0; i < 2*old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i=0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;    	/* true number of change-points */
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i=1; i < chg_nr; i++)  {
-			/* if <current_addr> > <last_addr>, swap */
-			/* or, if current=<start_addr> & last=<end_addr>, swap */
-			if ((change_point[i]->addr < change_point[i-1]->addr) ||
-				((change_point[i]->addr == change_point[i-1]->addr) &&
-				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
-				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
-			   )
-			{
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing=1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries=0;	 /* number of entries in the overlap table */
-	new_bios_entry=0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx=0; chgidx < chg_nr; chgidx++)
-	{
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
-		{
-			/* add map entry to overlap list (> 1 entry implies an overlap) */
-			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
-		}
-		else
-		{
-			/* remove entry from list (order independent, so swap with last) */
-			for (i=0; i<overlap_entries; i++)
-			{
-				if (overlap_list[i] == change_point[chgidx]->pbios)
-					overlap_list[i] = overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/* if there are overlapping entries, decide which "type" to use */
-		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
-		current_type = 0;
-		for (i=0; i<overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/* continue building up new bios map based on this information */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/* move forward only if the new size was non-zero */
-				if (new_bios[new_bios_entry].size != 0)
-					if (++new_bios_entry >= E820MAX)
-						break; 	/* no more space left for new bios entries */
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr=change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	new_nr = new_bios_entry;   /* retain count for new bios entries */
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		u64 start = biosmap->addr;
-		u64 size = biosmap->size;
-		u64 end = start + size;
-		u32 type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		add_memory_region(start, size, type);
-	} while (biosmap++, --nr_map);
-
-	return 0;
-}
-
-/*
- * Find the highest page frame number we have available
- */
-void __init propagate_e820_map(void)
-{
-	int i;
-
-	max_pfn = 0;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long start, end;
-		/* RAM? */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		start = PFN_UP(e820.map[i].addr);
-		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-		if (start >= end)
-			continue;
-		if (end > max_pfn)
-			max_pfn = end;
-		memory_present(0, start, end);
-	}
-}
-
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-void __init register_bootmem_low_pages(unsigned long max_low_pfn)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		unsigned long curr_pfn, last_pfn, size;
-		/*
-		 * Reserve usable low memory
-		 */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(e820.map[i].addr);
-		if (curr_pfn >= max_low_pfn)
-			continue;
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		/*
-		 * .. finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		size = last_pfn - curr_pfn;
-		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
-	}
-}
-
-void __init e820_register_memory(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long long last;
-	int i;
-
-	/*
-	 * Search for the biggest gap in the low 32 bits of the e820
-	 * memory space.
-	 */
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
-		pci_mem_start, gapstart, gapsize);
-}
-
-void __init print_memory_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(" %s: %016Lx - %016Lx ", who,
-			e820.map[i].addr,
-			e820.map[i].addr + e820.map[i].size);
-		switch (e820.map[i].type) {
-		case E820_RAM:	printk("(usable)\n");
-				break;
-		case E820_RESERVED:
-				printk("(reserved)\n");
-				break;
-		case E820_ACPI:
-				printk("(ACPI data)\n");
-				break;
-		case E820_NVS:
-				printk("(ACPI NVS)\n");
-				break;
-		default:	printk("type %u\n", e820.map[i].type);
-				break;
-		}
-	}
-}
-
-void __init limit_regions(unsigned long long size)
-{
-	unsigned long long current_addr;
-	int i;
-
-	print_memory_map("limit_regions start");
-	for (i = 0; i < e820.nr_map; i++) {
-		current_addr = e820.map[i].addr + e820.map[i].size;
-		if (current_addr < size)
-			continue;
-
-		if (e820.map[i].type != E820_RAM)
-			continue;
-
-		if (e820.map[i].addr >= size) {
-			/*
-			 * This region starts past the end of the
-			 * requested size, skip it completely.
-			 */
-			e820.nr_map = i;
-		} else {
-			e820.nr_map = i + 1;
-			e820.map[i].size -= current_addr - size;
-		}
-		print_memory_map("limit_regions endfor");
-		return;
-	}
-	print_memory_map("limit_regions endfunc");
-}
-
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(u64 start, u64 end, unsigned type)
-{
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		const struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		return 1;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
- /*
-  * This function checks if the entire range <start,end> is mapped with type.
-  *
-  * Note: this function only works correct if the e820 table is sorted and
-  * not-overlapping, which is the case
-  */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
-	u64 start = s;
-	u64 end = e;
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full
-		 * coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
-static int __init parse_memmap(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "exactmap") == 0) {
-#ifdef CONFIG_CRASH_DUMP
-		/* If we are doing a crash dump, we
-		 * still need to know the real mem
-		 * size before original memory map is
-		 * reset.
-		 */
-		propagate_e820_map();
-		saved_max_pfn = max_pfn;
-#endif
-		e820.nr_map = 0;
-		user_defined_memmap = 1;
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long start_at, mem_size;
-
-		mem_size = memparse(arg, &arg);
-		if (*arg == '@') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RAM);
-		} else if (*arg == '#') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_ACPI);
-		} else if (*arg == '$') {
-			start_at = memparse(arg+1, &arg);
-			add_memory_region(start_at, mem_size, E820_RESERVED);
-		} else {
-			limit_regions(mem_size);
-			user_defined_memmap = 1;
-		}
-	}
-	return 0;
-}
-early_param("memmap", parse_memmap);
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
-				unsigned new_type)
-{
-	int i;
-
-	BUG_ON(old_type == new_type);
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		u64 final_start, final_end;
-		if (ei->type != old_type)
-			continue;
-		/* totally covered? */
-		if (ei->addr >= start && ei->size <= size) {
-			ei->type = new_type;
-			continue;
-		}
-		/* partially covered */
-		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
-		if (final_start >= final_end)
-			continue;
-		add_memory_region(final_start, final_end - final_start,
-					 new_type);
-	}
-}
-void __init update_e820(void)
-{
-	u8 nr_map;
-
-	nr_map = e820.nr_map;
-	if (sanitize_e820_map(e820.map, &nr_map))
-		return;
-	e820.nr_map = nr_map;
-	printk(KERN_INFO "modified physical RAM map:\n");
-	print_memory_map("modified");
-}
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
deleted file mode 100644
index 124480c0008d..000000000000
--- a/arch/x86/kernel/e820_64.c
+++ /dev/null
@@ -1,952 +0,0 @@
-/*
- * Handle the memory map.
- * The functions here do the job until bootmem takes over.
- *
- *  Getting sanitize_e820_map() in sync with i386 version by applying change:
- *  -  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *     Alex Achenbach <xela@slit.de>, December 2002.
- *  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/pfn.h>
-
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/e820.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/kdebug.h>
-#include <asm/trampoline.h>
-
-struct e820map e820;
-
-/*
- * PFN of last memory page.
- */
-unsigned long end_pfn;
-
-/*
- * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
- * The direct mapping extends to max_pfn_mapped, so that we can directly access
- * apertures, ACPI and other tables without having to play with fixmaps.
- */
-unsigned long max_pfn_mapped;
-
-/*
- * Last pfn which the user wants to use.
- */
-static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT;
-
-/*
- * Early reserved memory areas.
- */
-#define MAX_EARLY_RES 20
-
-struct early_res {
-	unsigned long start, end;
-	char name[16];
-};
-static struct early_res early_res[MAX_EARLY_RES] __initdata = {
-	{ 0, PAGE_SIZE, "BIOS data page" },			/* BIOS data page */
-#ifdef CONFIG_X86_TRAMPOLINE
-	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
-#endif
-	{}
-};
-
-void __init reserve_early(unsigned long start, unsigned long end, char *name)
-{
-	int i;
-	struct early_res *r;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
-		if (end > r->start && start < r->end)
-			panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n",
-			      start, end - 1, name?name:"", r->start, r->end - 1, r->name);
-	}
-	if (i >= MAX_EARLY_RES)
-		panic("Too many early reservations");
-	r = &early_res[i];
-	r->start = start;
-	r->end = end;
-	if (name)
-		strncpy(r->name, name, sizeof(r->name) - 1);
-}
-
-void __init free_early(unsigned long start, unsigned long end)
-{
-	struct early_res *r;
-	int i, j;
-
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
-		if (start == r->start && end == r->end)
-			break;
-	}
-	if (i >= MAX_EARLY_RES || !early_res[i].end)
-		panic("free_early on not reserved area: %lx-%lx!", start, end);
-
-	for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
-		;
-
-	memmove(&early_res[i], &early_res[i + 1],
-	       (j - 1 - i) * sizeof(struct early_res));
-
-	early_res[j - 1].end = 0;
-}
-
-void __init early_res_to_bootmem(unsigned long start, unsigned long end)
-{
-	int i;
-	unsigned long final_start, final_end;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		final_start = max(start, r->start);
-		final_end = min(end, r->end);
-		if (final_start >= final_end)
-			continue;
-		printk(KERN_INFO "  early res: %d [%lx-%lx] %s\n", i,
-			final_start, final_end - 1, r->name);
-		reserve_bootmem_generic(final_start, final_end - final_start);
-	}
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr(unsigned long *addrp, unsigned long size, unsigned long align)
-{
-	int i;
-	unsigned long addr = *addrp, last;
-	int changed = 0;
-again:
-	last = addr + size;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		if (last >= r->start && addr < r->end) {
-			*addrp = addr = round_up(r->end, align);
-			changed = 1;
-			goto again;
-		}
-	}
-	return changed;
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align)
-{
-	int i;
-	unsigned long addr = *addrp, last;
-	unsigned long size = *sizep;
-	int changed = 0;
-again:
-	last = addr + size;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		if (last > r->start && addr < r->start) {
-			size = r->start - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last > r->end && addr < r->end) {
-			addr = round_up(r->end, align);
-			size = last - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last <= r->end && addr >= r->start) {
-			(*sizep)++;
-			return 0;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
-}
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (type && ei->type != type)
-			continue;
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		return 1;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end,
-			   unsigned type)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/*
-		 * if start is now at or beyond end, we're done, full
-		 * coverage
-		 */
-		if (start >= end)
-			return 1;
-	}
-	return 0;
-}
-
-/*
- * Find a free area with specified alignment in a specific range.
- */
-unsigned long __init find_e820_area(unsigned long start, unsigned long end,
-				    unsigned long size, unsigned long align)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		unsigned long addr, last;
-		unsigned long ei_last;
-
-		if (ei->type != E820_RAM)
-			continue;
-		addr = round_up(ei->addr, align);
-		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
-			;
-		last = addr + size;
-		if (last > ei_last)
-			continue;
-		if (last > end)
-			continue;
-		return addr;
-	}
-	return -1UL;
-}
-
-/*
- * Find next free range after *start
- */
-unsigned long __init find_e820_area_size(unsigned long start,
-					 unsigned long *sizep,
-					 unsigned long align)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		unsigned long addr, last;
-		unsigned long ei_last;
-
-		if (ei->type != E820_RAM)
-			continue;
-		addr = round_up(ei->addr, align);
-		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (bad_addr_size(&addr, sizep, align) &&
-			addr + *sizep <= ei_last)
-			;
-		last = addr + *sizep;
-		if (last > ei_last)
-			continue;
-		return addr;
-	}
-	return -1UL;
-
-}
-/*
- * Find the highest page frame number we have available
- */
-unsigned long __init e820_end_of_ram(void)
-{
-	unsigned long end_pfn;
-
-	end_pfn = find_max_pfn_with_active_regions();
-
-	if (end_pfn > max_pfn_mapped)
-		max_pfn_mapped = end_pfn;
-	if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT)
-		max_pfn_mapped = MAXMEM>>PAGE_SHIFT;
-	if (end_pfn > end_user_pfn)
-		end_pfn = end_user_pfn;
-	if (end_pfn > max_pfn_mapped)
-		end_pfn = max_pfn_mapped;
-
-	printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped);
-	return end_pfn;
-}
-
-/*
- * Mark e820 reserved areas as busy for the resource manager.
- */
-void __init e820_reserve_resources(void)
-{
-	int i;
-	struct resource *res;
-
-	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
-	for (i = 0; i < e820.nr_map; i++) {
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
-		res++;
-	}
-}
-
-/*
- * Find the ranges of physical addresses that do not correspond to
- * e820 RAM areas and mark the corresponding pages as nosave for software
- * suspend and suspend to RAM.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
-	int i;
-	unsigned long paddr;
-
-	paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE);
-	for (i = 1; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (paddr < ei->addr)
-			register_nosave_region(PFN_DOWN(paddr),
-						PFN_UP(ei->addr));
-
-		paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
-		if (ei->type != E820_RAM)
-			register_nosave_region(PFN_UP(ei->addr),
-						PFN_DOWN(paddr));
-
-		if (paddr >= (end_pfn << PAGE_SHIFT))
-			break;
-	}
-}
-
-/*
- * Finds an active region in the address range from start_pfn to end_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
- */
-static int __init e820_find_active_region(const struct e820entry *ei,
-					  unsigned long start_pfn,
-					  unsigned long end_pfn,
-					  unsigned long *ei_startpfn,
-					  unsigned long *ei_endpfn)
-{
-	*ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Check if max_pfn_mapped should be updated */
-	if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped)
-		max_pfn_mapped = *ei_endpfn;
-
-	/* Skip if map is outside the node */
-	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
-				    *ei_startpfn >= end_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > end_pfn)
-		*ei_endpfn = end_pfn;
-
-	/* Obey end_user_pfn to save on memmap */
-	if (*ei_startpfn >= end_user_pfn)
-		return 0;
-	if (*ei_endpfn > end_user_pfn)
-		*ei_endpfn = end_user_pfn;
-
-	return 1;
-}
-
-/* Walk the e820 map and register active regions within a node */
-void __init
-e820_register_active_regions(int nid, unsigned long start_pfn,
-							unsigned long end_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++)
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/*
- * Add a memory region to the kernel e820 map.
- */
-void __init add_memory_region(unsigned long start, unsigned long size, int type)
-{
-	int x = e820.nr_map;
-
-	if (x == E820MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-unsigned long __init e820_hole_size(unsigned long start, unsigned long end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long end_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn, ei_endpfn, ram = 0;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-	}
-	return end - start - (ram << PAGE_SHIFT);
-}
-
-static void __init e820_print_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
-		       (unsigned long long) e820.map[i].addr,
-		       (unsigned long long)
-		       (e820.map[i].addr + e820.map[i].size));
-		switch (e820.map[i].type) {
-		case E820_RAM:
-			printk(KERN_CONT "(usable)\n");
-			break;
-		case E820_RESERVED:
-			printk(KERN_CONT "(reserved)\n");
-			break;
-		case E820_ACPI:
-			printk(KERN_CONT "(ACPI data)\n");
-			break;
-		case E820_NVS:
-			printk(KERN_CONT "(ACPI NVS)\n");
-			break;
-		default:
-			printk(KERN_CONT "type %u\n", e820.map[i].type);
-			break;
-		}
-	}
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map)
-{
-	struct change_member {
-		struct e820entry *pbios; /* pointer to original bios entry */
-		unsigned long long addr; /* address for this change point */
-	};
-	static struct change_member change_point_list[2*E820MAX] __initdata;
-	static struct change_member *change_point[2*E820MAX] __initdata;
-	static struct e820entry *overlap_list[E820MAX] __initdata;
-	static struct e820entry new_bios[E820MAX] __initdata;
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following
-		(1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2)
-		return -1;
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i = 0; i < old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
-			return -1;
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i = 0; i < 2 * old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i = 0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr +
-				biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i = 1; i < chg_nr; i++)  {
-			unsigned long long curaddr, lastaddr;
-			unsigned long long curpbaddr, lastpbaddr;
-
-			curaddr = change_point[i]->addr;
-			lastaddr = change_point[i - 1]->addr;
-			curpbaddr = change_point[i]->pbios->addr;
-			lastpbaddr = change_point[i - 1]->pbios->addr;
-
-			/*
-			 * swap entries, when:
-			 *
-			 * curaddr > lastaddr or
-			 * curaddr == lastaddr and curaddr == curpbaddr and
-			 * lastaddr != lastpbaddr
-			 */
-			if (curaddr < lastaddr ||
-			    (curaddr == lastaddr && curaddr == curpbaddr &&
-			     lastaddr != lastpbaddr)) {
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing = 1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries = 0;	 /* number of entries in the overlap table */
-	new_bios_entry = 0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx = 0; chgidx < chg_nr; chgidx++) {
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr ==
-		    change_point[chgidx]->pbios->addr) {
-			/*
-			 * add map entry to overlap list (> 1 entry
-			 * implies an overlap)
-			 */
-			overlap_list[overlap_entries++] =
-				change_point[chgidx]->pbios;
-		} else {
-			/*
-			 * remove entry from list (order independent,
-			 * so swap with last)
-			 */
-			for (i = 0; i < overlap_entries; i++) {
-				if (overlap_list[i] ==
-				    change_point[chgidx]->pbios)
-					overlap_list[i] =
-						overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/*
-		 * if there are overlapping entries, decide which
-		 * "type" to use (larger value takes precedence --
-		 * 1=usable, 2,3,4,4+=unusable)
-		 */
-		current_type = 0;
-		for (i = 0; i < overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/*
-		 * continue building up new bios map based on this
-		 * information
-		 */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/*
-				 * move forward only if the new size
-				 * was non-zero
-				 */
-				if (new_bios[new_bios_entry].size != 0)
-					/*
-					 * no more space left for new
-					 * bios entries ?
-					 */
-					if (++new_bios_entry >= E820MAX)
-						break;
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr =
-					change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr = change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	/* retain count for new bios entries */
-	new_nr = new_bios_entry;
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- */
-static int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		u64 start = biosmap->addr;
-		u64 size = biosmap->size;
-		u64 end = start + size;
-		u32 type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		add_memory_region(start, size, type);
-	} while (biosmap++, --nr_map);
-	return 0;
-}
-
-static void early_panic(char *msg)
-{
-	early_printk(msg);
-	panic(msg);
-}
-
-/* We're not void only for x86 32-bit compat */
-char * __init machine_specific_memory_setup(void)
-{
-	char *who = "BIOS-e820";
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
-	if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0)
-		early_panic("Cannot find a valid memory map");
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-	e820_print_map(who);
-
-	/* In case someone cares... */
-	return who;
-}
-
-static int __init parse_memopt(char *p)
-{
-	if (!p)
-		return -EINVAL;
-	end_user_pfn = memparse(p, &p);
-	end_user_pfn >>= PAGE_SHIFT;
-	return 0;
-}
-early_param("mem", parse_memopt);
-
-static int userdef __initdata;
-
-static int __init parse_memmap_opt(char *p)
-{
-	char *oldp;
-	unsigned long long start_at, mem_size;
-
-	if (!strcmp(p, "exactmap")) {
-#ifdef CONFIG_CRASH_DUMP
-		/*
-		 * If we are doing a crash dump, we still need to know
-		 * the real mem size before original memory map is
-		 * reset.
-		 */
-		e820_register_active_regions(0, 0, -1UL);
-		saved_max_pfn = e820_end_of_ram();
-		remove_all_active_ranges();
-#endif
-		max_pfn_mapped = 0;
-		e820.nr_map = 0;
-		userdef = 1;
-		return 0;
-	}
-
-	oldp = p;
-	mem_size = memparse(p, &p);
-	if (p == oldp)
-		return -EINVAL;
-
-	userdef = 1;
-	if (*p == '@') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RAM);
-	} else if (*p == '#') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_ACPI);
-	} else if (*p == '$') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RESERVED);
-	} else {
-		end_user_pfn = (mem_size >> PAGE_SHIFT);
-	}
-	return *p == '\0' ? 0 : -EINVAL;
-}
-early_param("memmap", parse_memmap_opt);
-
-void __init finish_e820_parsing(void)
-{
-	if (userdef) {
-		char nr = e820.nr_map;
-
-		if (sanitize_e820_map(e820.map, &nr) < 0)
-			early_panic("Invalid user supplied memory map");
-		e820.nr_map = nr;
-
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		e820_print_map("user");
-	}
-}
-
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
-				unsigned new_type)
-{
-	int i;
-
-	BUG_ON(old_type == new_type);
-
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		u64 final_start, final_end;
-		if (ei->type != old_type)
-			continue;
-		/* totally covered? */
-		if (ei->addr >= start && ei->size <= size) {
-			ei->type = new_type;
-			continue;
-		}
-		/* partially covered */
-		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
-		if (final_start >= final_end)
-			continue;
-		add_memory_region(final_start, final_end - final_start,
-					 new_type);
-	}
-}
-
-void __init update_e820(void)
-{
-	u8 nr_map;
-
-	nr_map = e820.nr_map;
-	if (sanitize_e820_map(e820.map, &nr_map))
-		return;
-	e820.nr_map = nr_map;
-	printk(KERN_INFO "modified physical RAM map:\n");
-	e820_print_map("modified");
-}
-
-unsigned long pci_mem_start = 0xaeedbabe;
-EXPORT_SYMBOL(pci_mem_start);
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space.  We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long last;
-	int i;
-	int found = 0;
-
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-				found = 1;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	if (!found) {
-		gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
-		       "address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
-		       "registers may break!\n");
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk(KERN_INFO
-	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
-	       pci_mem_start, gapstart, gapsize);
-}
-
-int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
-{
-	int i;
-
-	if (slot < 0 || slot >= e820.nr_map)
-		return -1;
-	for (i = slot; i < e820.nr_map; i++) {
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		break;
-	}
-	if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
-		return -1;
-	*addr = e820.map[i].addr;
-	*size = min_t(u64, e820.map[i].size + e820.map[i].addr,
-		max_pfn << PAGE_SHIFT) - *addr;
-	return i + 1;
-}
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 9f51e1ea9e82..a4665f37cfc5 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -50,7 +50,7 @@ static void __init fix_hypertransport_config(int num, int slot, int func)
 static void __init via_bugs(int  num, int slot, int func)
 {
 #ifdef CONFIG_GART_IOMMU
-	if ((end_pfn > MAX_DMA32_PFN ||  force_iommu) &&
+	if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) &&
 	    !gart_iommu_aperture_allowed) {
 		printk(KERN_INFO
 		       "Looks like a VIA chipset. Disabling IOMMU."
@@ -98,17 +98,6 @@ static void __init nvidia_bugs(int num, int slot, int func)
 
 }
 
-static void __init ati_bugs(int num, int slot, int func)
-{
-#ifdef CONFIG_X86_IO_APIC
-	if (timer_over_8254 == 1) {
-		timer_over_8254 = 0;
-		printk(KERN_INFO
-		"ATI board detected. Disabling timer routing over 8254.\n");
-	}
-#endif
-}
-
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -126,8 +115,6 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
 	{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
-	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
-	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
 	{}
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 77d424cf68b3..06cc8d4254b1 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -64,6 +64,17 @@ static int __init setup_noefi(char *arg)
 }
 early_param("noefi", setup_noefi);
 
+int add_efi_memmap;
+EXPORT_SYMBOL(add_efi_memmap);
+
+static int __init setup_add_efi_memmap(char *arg)
+{
+	add_efi_memmap = 1;
+	return 0;
+}
+early_param("add_efi_memmap", setup_add_efi_memmap);
+
+
 static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
 {
 	return efi_call_virt2(get_time, tm, tc);
@@ -213,6 +224,50 @@ unsigned long efi_get_time(void)
 		      eft.minute, eft.second);
 }
 
+/*
+ * Tell the kernel about the EFI memory map.  This might include
+ * more than the max 128 entries that can fit in the e820 legacy
+ * (zeropage) memory map.
+ */
+
+static void __init do_add_efi_memmap(void)
+{
+	void *p;
+
+	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+		efi_memory_desc_t *md = p;
+		unsigned long long start = md->phys_addr;
+		unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
+		int e820_type;
+
+		if (md->attribute & EFI_MEMORY_WB)
+			e820_type = E820_RAM;
+		else
+			e820_type = E820_RESERVED;
+		e820_add_region(start, size, e820_type);
+	}
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+}
+
+void __init efi_reserve_early(void)
+{
+	unsigned long pmap;
+
+#ifdef CONFIG_X86_32
+	pmap = boot_params.efi_info.efi_memmap;
+#else
+	pmap = (boot_params.efi_info.efi_memmap |
+		((__u64)boot_params.efi_info.efi_memmap_hi<<32));
+#endif
+	memmap.phys_map = (void *)pmap;
+	memmap.nr_map = boot_params.efi_info.efi_memmap_size /
+		boot_params.efi_info.efi_memdesc_size;
+	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
+	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
+	reserve_early(pmap, pmap + memmap.nr_map * memmap.desc_size,
+		      "EFI memmap");
+}
+
 #if EFI_DEBUG
 static void __init print_efi_memmap(void)
 {
@@ -244,19 +299,11 @@ void __init efi_init(void)
 
 #ifdef CONFIG_X86_32
 	efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
-	memmap.phys_map = (void *)boot_params.efi_info.efi_memmap;
 #else
 	efi_phys.systab = (efi_system_table_t *)
 		(boot_params.efi_info.efi_systab |
 		 ((__u64)boot_params.efi_info.efi_systab_hi<<32));
-	memmap.phys_map = (void *)
-		(boot_params.efi_info.efi_memmap |
-		 ((__u64)boot_params.efi_info.efi_memmap_hi<<32));
 #endif
-	memmap.nr_map = boot_params.efi_info.efi_memmap_size /
-		boot_params.efi_info.efi_memdesc_size;
-	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
-	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
 
 	efi.systab = early_ioremap((unsigned long)efi_phys.systab,
 				   sizeof(efi_system_table_t));
@@ -370,6 +417,8 @@ void __init efi_init(void)
 	if (memmap.desc_size != sizeof(efi_memory_desc_t))
 		printk(KERN_WARNING "Kernel-defined memdesc"
 		       "doesn't match the one from EFI!\n");
+	if (add_efi_memmap)
+		do_add_efi_memmap();
 
 	/* Setup for EFI runtime service */
 	reboot_type = BOOT_EFI;
@@ -424,7 +473,7 @@ void __init efi_enter_virtual_mode(void)
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if (PFN_UP(end) <= max_pfn_mapped)
+		if (PFN_UP(end) <= max_low_pfn_mapped)
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index d0060fdcccac..652c5287215f 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -97,13 +97,7 @@ void __init efi_call_phys_epilog(void)
 	early_runtime_code_mapping_set_exec(0);
 }
 
-void __init efi_reserve_bootmem(void)
-{
-	reserve_bootmem_generic((unsigned long)memmap.phys_map,
-				memmap.nr_map * memmap.desc_size);
-}
-
-void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
 	static unsigned pages_mapped __initdata;
 	unsigned i, pages;
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c778e4fa55a2..cfe28a715434 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -51,14 +51,14 @@
 #include <asm/percpu.h>
 #include <asm/dwarf2.h>
 #include <asm/processor-flags.h>
-#include "irq_vectors.h"
+#include <asm/irq_vectors.h>
 
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
  *   INTERRUPT_RETURN (aka. "iret")
  *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSCALL_RET (aka "sti; sysexit").
+ *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
  *
  * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
  * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
@@ -349,7 +349,7 @@ sysenter_past_esp:
 	xorl %ebp,%ebp
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
-	ENABLE_INTERRUPTS_SYSCALL_RET
+	ENABLE_INTERRUPTS_SYSEXIT
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -874,10 +874,10 @@ ENTRY(native_iret)
 .previous
 END(native_iret)
 
-ENTRY(native_irq_enable_syscall_ret)
+ENTRY(native_irq_enable_sysexit)
 	sti
 	sysexit
-END(native_irq_enable_syscall_ret)
+END(native_irq_enable_sysexit)
 #endif
 
 KPROBE_ENTRY(int3)
@@ -1024,6 +1024,7 @@ ENTRY(xen_sysenter_target)
 	RING0_INT_FRAME
 	addl $5*4, %esp		/* remove xen-provided frame */
 	jmp sysenter_past_esp
+	CFI_ENDPROC
 
 ENTRY(xen_hypervisor_callback)
 	CFI_STARTPROC
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 556a8df522a7..bb4e22f4892f 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -59,8 +59,7 @@
 #endif	
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_irq_enable_syscall_ret)
-	movq	%gs:pda_oldrsp,%rsp
+ENTRY(native_usergs_sysret64)
 	swapgs
 	sysretq
 #endif /* CONFIG_PARAVIRT */
@@ -104,7 +103,7 @@ ENTRY(native_irq_enable_syscall_ret)
 	.macro FAKE_STACK_FRAME child_rip
 	/* push in order ss, rsp, eflags, cs, rip */
 	xorl %eax, %eax
-	pushq %rax /* ss */
+	pushq $__KERNEL_DS /* ss */
 	CFI_ADJUST_CFA_OFFSET	8
 	/*CFI_REL_OFFSET	ss,0*/
 	pushq %rax /* rsp */
@@ -169,13 +168,13 @@ ENTRY(ret_from_fork)
 	CFI_ADJUST_CFA_OFFSET -4
 	call schedule_tail
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
 	jnz rff_trace
 rff_action:	
 	RESTORE_REST
 	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
 	je   int_ret_from_sys_call
-	testl $_TIF_IA32,threadinfo_flags(%rcx)
+	testl $_TIF_IA32,TI_flags(%rcx)
 	jnz  int_ret_from_sys_call
 	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
 	jmp ret_from_sys_call
@@ -244,7 +243,8 @@ ENTRY(system_call_after_swapgs)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+		TI_flags(%rcx)
 	jnz tracesys
 	cmpq $__NR_syscall_max,%rax
 	ja badsys
@@ -263,7 +263,7 @@ sysret_check:
 	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	jnz  sysret_careful 
 	CFI_REMEMBER_STATE
@@ -275,7 +275,8 @@ sysret_check:
 	CFI_REGISTER	rip,rcx
 	RESTORE_ARGS 0,-ARG_SKIP,1
 	/*CFI_REGISTER	rflags,r11*/
-	ENABLE_INTERRUPTS_SYSCALL_RET
+	movq	%gs:pda_oldrsp, %rsp
+	USERGS_SYSRET64
 
 	CFI_RESTORE_STATE
 	/* Handle reschedules */
@@ -305,7 +306,7 @@ sysret_signal:
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
-1:	movl $_TIF_NEED_RESCHED,%edi
+1:	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -347,10 +348,10 @@ int_ret_from_sys_call:
 int_with_check:
 	LOCKDEP_SYS_EXIT_IRQ
 	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	jnz   int_careful
-	andl    $~TS_COMPAT,threadinfo_status(%rcx)
+	andl    $~TS_COMPAT,TI_status(%rcx)
 	jmp   retint_swapgs
 
 	/* Either reschedule or signal or syscall exit tracking needed. */
@@ -393,7 +394,7 @@ int_signal:
 	movq %rsp,%rdi		# &ptregs -> arg1
 	xorl %esi,%esi		# oldset -> arg2
 	call do_notify_resume
-1:	movl $_TIF_NEED_RESCHED,%edi	
+1:	movl $_TIF_WORK_MASK,%edi
 int_restore_rest:
 	RESTORE_REST
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -420,7 +421,6 @@ END(\label)
 	PTREGSCALL stub_clone, sys_clone, %r8
 	PTREGSCALL stub_fork, sys_fork, %rdi
 	PTREGSCALL stub_vfork, sys_vfork, %rdi
-	PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
 	PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
 	PTREGSCALL stub_iopl, sys_iopl, %rsi
 
@@ -559,7 +559,7 @@ retint_with_reschedule:
 	movl $_TIF_WORK_MASK,%edi
 retint_check:
 	LOCKDEP_SYS_EXIT_IRQ
-	movl threadinfo_flags(%rcx),%edx
+	movl TI_flags(%rcx),%edx
 	andl %edi,%edx
 	CFI_REMEMBER_STATE
 	jnz  retint_careful
@@ -647,17 +647,16 @@ retint_signal:
 	RESTORE_REST
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl $_TIF_NEED_RESCHED,%edi
 	GET_THREAD_INFO(%rcx)
-	jmp retint_check
+	jmp retint_with_reschedule
 
 #ifdef CONFIG_PREEMPT
 	/* Returning to kernel space. Check if we need preemption */
 	/* rcx:	 threadinfo. interrupts off. */
 ENTRY(retint_kernel)
-	cmpl $0,threadinfo_preempt_count(%rcx)
+	cmpl $0,TI_preempt_count(%rcx)
 	jnz  retint_restore_args
-	bt  $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+	bt  $TIF_NEED_RESCHED,TI_flags(%rcx)
 	jnc  retint_restore_args
 	bt   $9,EFLAGS-ARGOFFSET(%rsp)	/* interrupts off? */
 	jnc  retint_restore_args
@@ -720,6 +719,10 @@ ENTRY(apic_timer_interrupt)
 	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
 END(apic_timer_interrupt)
 
+ENTRY(uv_bau_message_intr1)
+	apicinterrupt 220,uv_bau_message_interrupt
+END(uv_bau_message_intr1)
+
 ENTRY(error_interrupt)
 	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
 END(error_interrupt)
@@ -733,6 +736,7 @@ END(spurious_interrupt)
  */ 		
 	.macro zeroentry sym
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0	/* push error code/oldrax */ 
 	CFI_ADJUST_CFA_OFFSET 8
 	pushq %rax	/* push real oldrax to the rdi slot */ 
@@ -745,6 +749,7 @@ END(spurious_interrupt)
 
 	.macro errorentry sym
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq %rax
 	CFI_ADJUST_CFA_OFFSET 8
 	CFI_REL_OFFSET rax,0
@@ -814,7 +819,7 @@ paranoid_restore\trace:
 	jmp irq_return
 paranoid_userspace\trace:
 	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%ebx
+	movl TI_flags(%rcx),%ebx
 	andl $_TIF_WORK_MASK,%ebx
 	jz paranoid_swapgs\trace
 	movq %rsp,%rdi			/* &pt_regs */
@@ -912,7 +917,7 @@ error_exit:
 	testl %eax,%eax
 	jne  retint_kernel
 	LOCKDEP_SYS_EXIT_IRQ
-	movl  threadinfo_flags(%rcx),%edx
+	movl  TI_flags(%rcx),%edx
 	movl  $_TIF_WORK_MASK,%edi
 	andl  %edi,%edx
 	jnz  retint_careful
@@ -926,11 +931,11 @@ error_kernelspace:
 	   iret run with kernel gs again, so don't set the user space flag.
 	   B stepping K8s sometimes report an truncated RIP for IRET 
 	   exceptions returning to compat mode. Check for these here too. */
-	leaq irq_return(%rip),%rbp
-	cmpq %rbp,RIP(%rsp) 
+	leaq irq_return(%rip),%rcx
+	cmpq %rcx,RIP(%rsp)
 	je   error_swapgs
-	movl %ebp,%ebp	/* zero extend */
-	cmpq %rbp,RIP(%rsp) 
+	movl %ecx,%ecx	/* zero extend */
+	cmpq %rcx,RIP(%rsp)
 	je   error_swapgs
 	cmpq $gs_change,RIP(%rsp)
         je   error_swapgs
@@ -939,7 +944,7 @@ KPROBE_END(error_entry)
 	
        /* Reload gs selector with exception handling */
        /* edi:  new selector */ 
-ENTRY(load_gs_index)
+ENTRY(native_load_gs_index)
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
@@ -953,7 +958,7 @@ gs_change:
 	CFI_ADJUST_CFA_OFFSET -8
         ret
 	CFI_ENDPROC
-ENDPROC(load_gs_index)
+ENDPROC(native_load_gs_index)
        
         .section __ex_table,"a"
         .align 8
@@ -1120,10 +1125,6 @@ ENTRY(coprocessor_segment_overrun)
 	zeroentry do_coprocessor_segment_overrun
 END(coprocessor_segment_overrun)
 
-ENTRY(reserved)
-	zeroentry do_reserved
-END(reserved)
-
 	/* runs on exception stack */
 ENTRY(double_fault)
 	XCPT_FRAME
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index cbaaf69bedb2..1fa8be5bd217 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -51,7 +51,7 @@ void __init setup_apic_routing(void)
 	else
 #endif
 
-	if (num_possible_cpus() <= 8)
+	if (max_physical_apicid < 8)
 		genapic = &apic_flat;
 	else
 		genapic = &apic_physflat;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index ebf13908a743..711f11c30b06 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -5,9 +5,10 @@
  *
  * SGI UV APIC functions (note: not an Intel compatible APIC)
  *
- * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <linux/kernel.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
@@ -20,6 +21,7 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/pgtable.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 
@@ -55,37 +57,37 @@ static cpumask_t uv_vector_allocation_domain(int cpu)
 int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
 {
 	unsigned long val;
-	int nasid;
+	int pnode;
 
-	nasid = uv_apicid_to_nasid(phys_apicid);
+	pnode = uv_apicid_to_pnode(phys_apicid);
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_INIT;
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 	mdelay(10);
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_STARTUP;
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 	return 0;
 }
 
 static void uv_send_IPI_one(int cpu, int vector)
 {
 	unsigned long val, apicid, lapicid;
-	int nasid;
+	int pnode;
 
 	apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
 	lapicid = apicid & 0x3f;		/* ZZZ macro needed */
-	nasid = uv_apicid_to_nasid(apicid);
+	pnode = uv_apicid_to_pnode(apicid);
 	val =
 	    (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
 					      UVH_IPI_INT_APIC_ID_SHFT) |
 	    (vector << UVH_IPI_INT_VECTOR_SHFT);
-	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
 
 static void uv_send_IPI_mask(cpumask_t mask, int vector)
@@ -159,39 +161,146 @@ struct genapic apic_x2apic_uv_x = {
 	.phys_pkg_id = phys_pkg_id,	/* Fixme ZZZ */
 };
 
-static __cpuinit void set_x2apic_extra_bits(int nasid)
+static __cpuinit void set_x2apic_extra_bits(int pnode)
 {
-	__get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6);
+	__get_cpu_var(x2apic_extra_bits) = (pnode << 6);
 }
 
 /*
  * Called on boot cpu.
  */
+static __init int boot_pnode_to_blade(int pnode)
+{
+	int blade;
+
+	for (blade = 0; blade < uv_num_possible_blades(); blade++)
+		if (pnode == uv_blade_info[blade].pnode)
+			return blade;
+	BUG();
+}
+
+struct redir_addr {
+	unsigned long redirect;
+	unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+		if (alias.s.base == 0) {
+			*size = (1UL << alias.s.m_alias);
+			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+			return;
+		}
+	}
+	BUG();
+}
+
+static __init void map_low_mmrs(void)
+{
+	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
+	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
+}
+
+enum map_type {map_wb, map_uc};
+
+static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+{
+	unsigned long bytes, paddr;
+
+	paddr = base << shift;
+	bytes = (1UL << shift);
+	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
+	       					paddr + bytes);
+	if (map_type == map_uc)
+		init_extra_mapping_uc(paddr, bytes);
+	else
+		init_extra_mapping_wb(paddr, bytes);
+
+}
+static __init void map_gru_high(int max_pnode)
+{
+	union uvh_rh_gam_gru_overlay_config_mmr_u gru;
+	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
+	if (gru.s.enable)
+		map_high("GRU", gru.s.base, shift, map_wb);
+}
+
+static __init void map_config_high(int max_pnode)
+{
+	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
+	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
+	if (cfg.s.enable)
+		map_high("CONFIG", cfg.s.base, shift, map_uc);
+}
+
+static __init void map_mmr_high(int max_pnode)
+{
+	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
+	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
+	if (mmr.s.enable)
+		map_high("MMR", mmr.s.base, shift, map_uc);
+}
+
+static __init void map_mmioh_high(int max_pnode)
+{
+	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
+	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
+	if (mmioh.s.enable)
+		map_high("MMIOH", mmioh.s.base, shift, map_uc);
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
-	int bytes, nid, cpu, lcpu, nasid, last_nasid, blade;
-	unsigned long mmr_base;
+	union uvh_node_id_u node_id;
+	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
+	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+	int max_pnode = 0;
+	unsigned long mmr_base, present;
+
+	map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_val = m_n_config.s.m_skt;
+	n_val = m_n_config.s.n_skt;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
 	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
 
-	last_nasid = -1;
-	for_each_possible_cpu(cpu) {
-		nid = cpu_to_node(cpu);
-		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
-		if (nasid != last_nasid)
-			uv_possible_blades++;
-		last_nasid = nasid;
-	}
+	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
+		uv_possible_blades +=
+		  hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
 	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
 
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = alloc_bootmem_pages(bytes);
 
+	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+
 	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
 	uv_node_to_blade = alloc_bootmem_pages(bytes);
 	memset(uv_node_to_blade, 255, bytes);
@@ -200,43 +309,62 @@ static __init void uv_system_init(void)
 	uv_cpu_to_blade = alloc_bootmem_pages(bytes);
 	memset(uv_cpu_to_blade, 255, bytes);
 
-	last_nasid = -1;
-	blade = -1;
-	lcpu = -1;
-	for_each_possible_cpu(cpu) {
-		nid = cpu_to_node(cpu);
-		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
-		if (nasid != last_nasid) {
-			blade++;
-			lcpu = -1;
-			uv_blade_info[blade].nr_posible_cpus = 0;
+	blade = 0;
+	for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) {
+		present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8);
+		for (j = 0; j < 64; j++) {
+			if (!test_bit(j, &present))
+				continue;
+			uv_blade_info[blade].pnode = (i * 64 + j);
+			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
+			blade++;
 		}
-		last_nasid = nasid;
-		lcpu++;
+	}
 
-		uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt;
-		uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt;
+	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+	gnode_upper = (((unsigned long)node_id.s.node_id) &
+		       ~((1 << n_val) - 1)) << m_val;
+
+	for_each_present_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+		blade = boot_pnode_to_blade(pnode);
+		lcpu = uv_blade_info[blade].nr_possible_cpus;
+		uv_blade_info[blade].nr_possible_cpus++;
+
+		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+		uv_cpu_hub_info(cpu)->lowmem_remap_top =
+					lowmem_redir_base + lowmem_redir_size;
+		uv_cpu_hub_info(cpu)->m_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = m_val;
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
-		uv_cpu_hub_info(cpu)->local_nasid = nasid;
-		uv_cpu_hub_info(cpu)->gnode_upper =
-		    nasid & ~((1 << uv_hub_info->n_val) - 1);
+		uv_cpu_hub_info(cpu)->pnode = pnode;
+		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
 		uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
-		uv_blade_info[blade].nasid = nasid;
-		uv_blade_info[blade].nr_posible_cpus++;
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
+		max_pnode = max(pnode, max_pnode);
 
-		printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n",
-		       cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid);
-		printk(KERN_DEBUG "UV   lcpu %d, blade %d\n", lcpu, blade);
+		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
+			"lcpu %d, blade %d\n",
+			cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
+			lcpu, blade);
 	}
+
+	map_gru_high(max_pnode);
+	map_mmr_high(max_pnode);
+	map_config_high(max_pnode);
+	map_mmioh_high(max_pnode);
 }
 
 /*
  * Called on each cpu to initialize the per_cpu UV data area.
+ * 	ZZZ hotplug not supported yet
  */
 void __cpuinit uv_cpu_init(void)
 {
@@ -246,5 +374,5 @@ void __cpuinit uv_cpu_init(void)
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
 	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
-		set_x2apic_extra_bits(uv_hub_info->local_nasid);
+		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
new file mode 100644
index 000000000000..3e66bd364a9d
--- /dev/null
+++ b/arch/x86/kernel/head.c
@@ -0,0 +1,55 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+void __init reserve_ebda_region(void)
+{
+	unsigned int lowmem, ebda_addr;
+
+	/* To determine the position of the EBDA and the */
+	/* end of conventional memory, we need to look at */
+	/* the BIOS data area. In a paravirtual environment */
+	/* that area is absent. We'll just have to assume */
+	/* that the paravirt case can handle memory setup */
+	/* correctly, without our help. */
+	if (paravirt_enabled())
+		return;
+
+	/* end of low (conventional) memory */
+	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+	lowmem <<= 10;
+
+	/* start of EBDA area */
+	ebda_addr = get_bios_ebda();
+
+	/* Fixup: bios puts an EBDA in the top 64K segment */
+	/* of conventional memory, but does not adjust lowmem. */
+	if ((lowmem - ebda_addr) <= 0x10000)
+		lowmem = ebda_addr;
+
+	/* Fixup: bios does not report an EBDA at all. */
+	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+		lowmem = 0x9f000;
+
+	/* Paranoia: should never happen, but... */
+	if ((lowmem == 0) || (lowmem >= 0x100000))
+		lowmem = 0x9f000;
+
+	/* reserve all memory between lowmem and the 1MB mark */
+	reserve_early_overlap_ok(lowmem, 0x100000, "BIOS reserved");
+}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3db059058927..fa1d25dd83e3 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -8,7 +8,34 @@
 #include <linux/init.h>
 #include <linux/start_kernel.h>
 
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/e820.h>
+#include <asm/bios_ebda.h>
+
 void __init i386_start_kernel(void)
 {
+	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* Reserve INITRD */
+	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+		u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
+	}
+#endif
+	reserve_early(init_pg_tables_start, init_pg_tables_end,
+			"INIT_PG_TABLE");
+
+	reserve_ebda_region();
+
+	/*
+	 * At this point everything still needed from the boot loader
+	 * or BIOS or kernel text should be early reserved or marked not
+	 * RAM in e820. All other memory is free game.
+	 */
+
 	start_kernel();
 }
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index e25c57b8aa84..c97819829146 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -25,6 +25,20 @@
 #include <asm/e820.h>
 #include <asm/bios_ebda.h>
 
+/* boot cpu pda */
+static struct x8664_pda _boot_cpu_pda __read_mostly;
+
+#ifdef CONFIG_SMP
+/*
+ * We install an empty cpu_pda pointer table to indicate to early users
+ * (numa_set_node) that the cpu_pda pointer table for cpus other than
+ * the boot cpu is not yet setup.
+ */
+static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
+#else
+static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
+#endif
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -51,74 +65,6 @@ static void __init copy_bootdata(char *real_mode_data)
 	}
 }
 
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int lowmem, ebda_addr;
-
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
-	if (paravirt_enabled())
-		return;
-
-	/* end of low (conventional) memory */
-	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
-	lowmem <<= 10;
-
-	/* start of EBDA area */
-	ebda_addr = get_bios_ebda();
-
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
-
-	/* reserve all memory between lowmem and the 1MB mark */
-	reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
-static void __init reserve_setup_data(void)
-{
-	struct setup_data *data;
-	unsigned long pa_data;
-	char buf[32];
-
-	if (boot_params.hdr.version < 0x0209)
-		return;
-	pa_data = boot_params.hdr.setup_data;
-	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
-		pa_data = data->next;
-		early_iounmap(data, sizeof(*data));
-	}
-}
-
 void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
@@ -156,10 +102,17 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	early_printk("Kernel alive\n");
 
- 	for (i = 0; i < NR_CPUS; i++)
- 		cpu_pda(i) = &boot_cpu_pda[i];
-
+	_cpu_pda = __cpu_pda;
+	cpu_pda(0) = &_boot_cpu_pda;
 	pda_init(0);
+
+	early_printk("Kernel really alive\n");
+
+	x86_64_start_reservations(real_mode_data);
+}
+
+void __init x86_64_start_reservations(char *real_mode_data)
+{
 	copy_bootdata(__va(real_mode_data));
 
 	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
@@ -175,7 +128,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
 #endif
 
 	reserve_ebda_region();
-	reserve_setup_data();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f7357cc0162c..f67e93441caf 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -194,6 +194,7 @@ default_entry:
 	xorl %ebx,%ebx				/* %ebx is kept at zero */
 
 	movl $pa(pg0), %edi
+	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_pmd), %edx
 	movl $PTE_ATTR, %eax
 10:
@@ -219,6 +220,8 @@ default_entry:
 	jb 10b
 1:
 	movl %edi,pa(init_pg_tables_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
 	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
@@ -228,6 +231,7 @@ default_entry:
 page_pde_offset = (__PAGE_OFFSET >> 20);
 
 	movl $pa(pg0), %edi
+	movl %edi, pa(init_pg_tables_start)
 	movl $pa(swapper_pg_dir), %edx
 	movl $PTE_ATTR, %eax
 10:
@@ -249,6 +253,8 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	cmpl %ebp,%eax
 	jb 10b
 	movl %edi,pa(init_pg_tables_end)
+	shrl $12, %eax
+	movl %eax, pa(max_pfn_mapped)
 
 	/* Do early initialization of the fixmap area */
 	movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
@@ -446,10 +452,13 @@ is386:	movl $2,%ecx		# set MP
 	je   1f
 	movl $(__KERNEL_PERCPU), %eax
 	movl %eax,%fs		# set this cpu's percpu
-	jmp initialize_secondary # all other CPUs call initialize_secondary
+	movl (stack_start), %esp
 1:
 #endif /* CONFIG_SMP */
-	jmp i386_start_kernel
+	jmp *(initial_code)
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b817974ef942..b07ac7b217cb 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -18,6 +18,7 @@
 #include <asm/page.h>
 #include <asm/msr.h>
 #include <asm/cache.h>
+#include <asm/processor-flags.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
@@ -31,6 +32,13 @@
  *
  */
 
+#define pud_index(x)	(((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+
+L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
+L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
+L4_START_KERNEL = pgd_index(__START_KERNEL_map)
+L3_START_KERNEL = pud_index(__START_KERNEL_map)
+
 	.text
 	.section .text.head
 	.code64
@@ -76,8 +84,8 @@ startup_64:
 	/* Fixup the physical addresses in the page table
 	 */
 	addq	%rbp, init_level4_pgt + 0(%rip)
-	addq	%rbp, init_level4_pgt + (258*8)(%rip)
-	addq	%rbp, init_level4_pgt + (511*8)(%rip)
+	addq	%rbp, init_level4_pgt + (L4_PAGE_OFFSET*8)(%rip)
+	addq	%rbp, init_level4_pgt + (L4_START_KERNEL*8)(%rip)
 
 	addq	%rbp, level3_ident_pgt + 0(%rip)
 
@@ -154,9 +162,7 @@ ENTRY(secondary_startup_64)
 	 */
 
 	/* Enable PAE mode and PGE */
-	xorq	%rax, %rax
-	btsq	$5, %rax
-	btsq	$7, %rax
+	movl	$(X86_CR4_PAE | X86_CR4_PGE), %eax
 	movq	%rax, %cr4
 
 	/* Setup early boot stage 4 level pagetables. */
@@ -184,19 +190,15 @@ ENTRY(secondary_startup_64)
 1:	wrmsr				/* Make changes effective */
 
 	/* Setup cr0 */
-#define CR0_PM				1		/* protected mode */
-#define CR0_MP				(1<<1)
-#define CR0_ET				(1<<4)
-#define CR0_NE				(1<<5)
-#define CR0_WP				(1<<16)
-#define CR0_AM				(1<<18)
-#define CR0_PAGING 			(1<<31)
-	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
+#define CR0_STATE	(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+			 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+			 X86_CR0_PG)
+	movl	$CR0_STATE, %eax
 	/* Make changes effective */
 	movq	%rax, %cr0
 
 	/* Setup a boot time stack */
-	movq init_rsp(%rip),%rsp
+	movq stack_start(%rip),%rsp
 
 	/* zero EFLAGS after setting rsp */
 	pushq $0
@@ -208,7 +210,7 @@ ENTRY(secondary_startup_64)
 	 * addresses where we're currently running on. We have to do that here
 	 * because in 32bit we couldn't load a 64bit linear address.
 	 */
-	lgdt	cpu_gdt_descr(%rip)
+	lgdt	early_gdt_descr(%rip)
 
 	/* set up data segments. actually 0 would do too */
 	movl $__KERNEL_DS,%eax
@@ -257,8 +259,9 @@ ENTRY(secondary_startup_64)
 	.quad	x86_64_start_kernel
 	__FINITDATA
 
-	ENTRY(init_rsp)
+	ENTRY(stack_start)
 	.quad  init_thread_union+THREAD_SIZE-8
+	.word  0
 
 bad_address:
 	jmp bad_address
@@ -327,11 +330,11 @@ early_idt_ripmsg:
 ENTRY(name)
 
 /* Automate the creation of 1 to 1 mapping pmd entries */
-#define PMDS(START, PERM, COUNT)		\
-	i = 0 ;					\
-	.rept (COUNT) ;				\
-	.quad	(START) + (i << 21) + (PERM) ;	\
-	i = i + 1 ;				\
+#define PMDS(START, PERM, COUNT)			\
+	i = 0 ;						\
+	.rept (COUNT) ;					\
+	.quad	(START) + (i << PMD_SHIFT) + (PERM) ;	\
+	i = i + 1 ;					\
 	.endr
 
 	/*
@@ -342,9 +345,9 @@ ENTRY(name)
 	 */
 NEXT_PAGE(init_level4_pgt)
 	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	257,8,0
+	.org	init_level4_pgt + L4_PAGE_OFFSET*8, 0
 	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	252,8,0
+	.org	init_level4_pgt + L4_START_KERNEL*8, 0
 	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
 	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
 
@@ -353,7 +356,7 @@ NEXT_PAGE(level3_ident_pgt)
 	.fill	511,8,0
 
 NEXT_PAGE(level3_kernel_pgt)
-	.fill	510,8,0
+	.fill	L3_START_KERNEL,8,0
 	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
 	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
 	.quad	level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
@@ -384,7 +387,7 @@ NEXT_PAGE(level2_kernel_pgt)
 	 *  If you want to increase this then increase MODULES_VADDR
 	 *  too.)
 	 */
-	PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+	PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
 		KERNEL_IMAGE_SIZE/PMD_SIZE)
 
 NEXT_PAGE(level2_spare_pgt)
@@ -395,54 +398,16 @@ NEXT_PAGE(level2_spare_pgt)
 
 	.data
 	.align 16
-	.globl cpu_gdt_descr
-cpu_gdt_descr:
-	.word	gdt_end-cpu_gdt_table-1
-gdt:
-	.quad	cpu_gdt_table
-#ifdef CONFIG_SMP
-	.rept	NR_CPUS-1
-	.word	0
-	.quad	0
-	.endr
-#endif
+	.globl early_gdt_descr
+early_gdt_descr:
+	.word	GDT_ENTRIES*8-1
+	.quad   per_cpu__gdt_page
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
 	.quad   0x0000000000000000
 
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout 
- */
-		 		
-	.section .data.page_aligned, "aw"
-	.align PAGE_SIZE
-
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
 	
-ENTRY(cpu_gdt_table)
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00cf9b000000ffff	/* __KERNEL32_CS */
-	.quad	0x00af9b000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
-	.quad	0x00cffb000000ffff	/* __USER32_CS */
-	.quad	0x00cff3000000ffff	/* __USER_DS, __USER32_DS  */
-	.quad	0x00affb000000ffff	/* __USER_CS */
-	.quad	0x0			/* unused */
-	.quad	0,0			/* TSS */
-	.quad	0,0			/* LDT */
-	.quad   0,0,0			/* three TLS descriptors */ 
-	.quad	0x0000f40000000000	/* node/CPU stored in limit */
-gdt_end:	
-	/* asm/segment.h:GDT_ENTRIES must match this */	
-	/* This should be a multiple of the cache line size */
-	/* GDTs of other CPUs are now dynamically allocated */
-
-	/* zero the remaining page */
-	.fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
-
 	.section .bss, "aw", @nobits
 	.align L1_CACHE_BYTES
 ENTRY(idt_table)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 9b5cfcdfc426..0ea6a19bfdfe 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -17,7 +17,7 @@
 
 /* FSEC = 10^-15
    NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000
+#define FSEC_PER_NSEC	1000000L
 
 /*
  * HPET address is set in acpi/boot.c, when an ACPI entry exists
@@ -36,26 +36,15 @@ static inline void hpet_writel(unsigned long d, unsigned long a)
 }
 
 #ifdef CONFIG_X86_64
-
 #include <asm/pgtable.h>
-
-static inline void hpet_set_mapping(void)
-{
-	set_fixmap_nocache(FIX_HPET_BASE, hpet_address);
-	__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
-	hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
-}
-
-static inline void hpet_clear_mapping(void)
-{
-	hpet_virt_address = NULL;
-}
-
-#else
+#endif
 
 static inline void hpet_set_mapping(void)
 {
 	hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
+#ifdef CONFIG_X86_64
+	__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
+#endif
 }
 
 static inline void hpet_clear_mapping(void)
@@ -63,7 +52,6 @@ static inline void hpet_clear_mapping(void)
 	iounmap(hpet_virt_address);
 	hpet_virt_address = NULL;
 }
-#endif
 
 /*
  * HPET command line enable / disable
@@ -206,20 +194,19 @@ static void hpet_enable_legacy_int(void)
 
 static void hpet_legacy_clockevent_register(void)
 {
-	uint64_t hpet_freq;
-
 	/* Start HPET legacy interrupts */
 	hpet_enable_legacy_int();
 
 	/*
-	 * The period is a femto seconds value. We need to calculate the
-	 * scaled math multiplication factor for nanosecond to hpet tick
-	 * conversion.
+	 * The mult factor is defined as (include/linux/clockchips.h)
+	 *  mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
+	 * hpet_period is in units of femtoseconds (per cycle), so
+	 *  mult/2^shift = cyc/ns = 10^6/hpet_period
+	 *  mult = (10^6 * 2^shift)/hpet_period
+	 *  mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
 	 */
-	hpet_freq = 1000000000000000ULL;
-	do_div(hpet_freq, hpet_period);
-	hpet_clockevent.mult = div_sc((unsigned long) hpet_freq,
-				      NSEC_PER_SEC, hpet_clockevent.shift);
+	hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
+				      hpet_period, hpet_clockevent.shift);
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
@@ -324,7 +311,7 @@ static struct clocksource clocksource_hpet = {
 
 static int hpet_clocksource_register(void)
 {
-	u64 tmp, start, now;
+	u64 start, now;
 	cycle_t t1;
 
 	/* Start the counter */
@@ -351,21 +338,15 @@ static int hpet_clocksource_register(void)
 		return -ENODEV;
 	}
 
-	/* Initialize and register HPET clocksource
-	 *
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * approximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	/*
+	 * The definition of mult is (include/linux/clocksource.h)
+	 * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
+	 * so we first need to convert hpet_period to ns/cyc units:
+	 *  mult/2^shift = ns/cyc = hpet_period/10^6
+	 *  mult = (hpet_period * 2^shift)/10^6
+	 *  mult = (hpet_period << shift)/FSEC_PER_NSEC
 	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
+	clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
 
 	clocksource_register(&clocksource_hpet);
 
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 95e80e5033c3..eb9ddd8efb82 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
 	int ret;
 
 	if (!cpu_has_fxsr)
-		return -EIO;
+		return -ENODEV;
 
 	ret = init_fpu(target);
 	if (ret)
@@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	int ret;
 
 	if (!cpu_has_fxsr)
-		return -EIO;
+		return -ENODEV;
 
 	ret = init_fpu(target);
 	if (ret)
diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c
index fe631967d625..dc92b49d9204 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259.c
@@ -1,8 +1,10 @@
+#include <linux/linkage.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/timex.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
@@ -10,10 +12,12 @@
 #include <linux/sysdev.h>
 #include <linux/bitops.h>
 
+#include <asm/acpi.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/timer.h>
+#include <asm/hw_irq.h>
 #include <asm/pgtable.h>
 #include <asm/delay.h>
 #include <asm/desc.h>
@@ -32,7 +36,7 @@ static int i8259A_auto_eoi;
 DEFINE_SPINLOCK(i8259A_lock);
 static void mask_and_ack_8259A(unsigned int);
 
-static struct irq_chip i8259A_chip = {
+struct irq_chip i8259A_chip = {
 	.name		= "XT-PIC",
 	.mask		= disable_8259A_irq,
 	.disable	= disable_8259A_irq,
@@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq)
 	int irqmask = 1<<irq;
 
 	if (irq < 8) {
-		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
+		outb(0x0B, PIC_MASTER_CMD);	/* ISR register */
 		value = inb(PIC_MASTER_CMD) & irqmask;
-		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
+		outb(0x0A, PIC_MASTER_CMD);	/* back to the IRR register */
 		return value;
 	}
-	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
+	outb(0x0B, PIC_SLAVE_CMD);	/* ISR register */
 	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
-	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
+	outb(0x0A, PIC_SLAVE_CMD);	/* back to the IRR register */
 	return value;
 }
 
@@ -171,12 +175,14 @@ handle_real_irq:
 	if (irq & 8) {
 		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
-		outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
-		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+		/* 'Specific EOI' to slave */
+		outb(0x60+(irq&7), PIC_SLAVE_CMD);
+		 /* 'Specific EOI' to master-IRQ2 */
+		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
 	} else {
 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_master_mask, PIC_MASTER_IMR);
-		outb(0x60+irq,PIC_MASTER_CMD);	/* 'Specific EOI to master */
+		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
 	}
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
@@ -199,7 +205,8 @@ spurious_8259A_irq:
 		 * lets ACK and report it. [once per IRQ]
 		 */
 		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+			printk(KERN_DEBUG
+			       "spurious 8259A interrupt: IRQ%d.\n", irq);
 			spurious_irq_mask |= irqmask;
 		}
 		atomic_inc(&irq_err_count);
@@ -290,17 +297,28 @@ void init_8259A(int auto_eoi)
 	 * outb_pic - this has to work on a wide range of PC hardware.
 	 */
 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
-	outb_pic(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
-	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+
+	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
+	                       to 0x20-0x27 on i386 */
+	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+
+	/* 8259A-1 (the master) has a slave on IR2 */
+	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
+
 	if (auto_eoi)	/* master does Auto EOI */
 		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
 	else		/* master expects normal EOI */
 		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
 
 	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
-	outb_pic(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
-	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
-	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+
+	/* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
+	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+	/* 8259A-2 is a slave on master's IR2 */
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+	/* (slave's support for AEOI in flat mode is to be investigated) */
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+
 	if (auto_eoi)
 		/*
 		 * In AEOI mode we just have to mask the interrupt
@@ -317,93 +335,3 @@ void init_8259A(int auto_eoi)
 
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 }
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
- 
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
-	extern void math_error(void __user *);
-	outb(0,0xF0);
-	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
-		return IRQ_NONE;
-	math_error((void __user *)get_irq_regs()->ip);
-	return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
-	.handler = math_error_irq,
-	.mask = CPU_MASK_NONE,
-	.name = "fpu",
-};
-
-void __init init_ISA_irqs (void)
-{
-	int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	init_bsp_APIC();
-#endif
-	init_8259A(0);
-
-	/*
-	 * 16 old-style INTA-cycle interrupts:
-	 */
-	for (i = 0; i < 16; i++) {
-		set_irq_chip_and_handler_name(i, &i8259A_chip,
-					      handle_level_irq, "XT");
-	}
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
-	int i;
-
-	/* all the set up before the call gates are initialised */
-	pre_intr_init_hook();
-
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (i >= NR_IRQS)
-			break;
-		/* SYSCALL_VECTOR was reserved in trap_init. */
-		if (!test_bit(vector, used_vectors))
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-	/* setup after call gates are initialised (usually add in
-	 * the architecture specific gates)
-	 */
-	intr_init_hook();
-
-	/*
-	 * External FPU? Set up irq13 if so, for
-	 * original braindamaged IBM FERR coupling.
-	 */
-	if (boot_cpu_data.hard_math && !cpu_has_fpu)
-		setup_irq(FPU_IRQ, &fpu_irq);
-
-	irq_ctx_init(smp_processor_id());
-}
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
deleted file mode 100644
index fa57a1568508..000000000000
--- a/arch/x86/kernel/i8259_64.c
+++ /dev/null
@@ -1,512 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/acpi.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define BI(x,y) \
-	BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
-	IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
-					  IRQLIST_16(0x2), IRQLIST_16(0x3),
-	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
-	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
-	.name		= "XT-PIC",
-	.mask		= disable_8259A_irq,
-	.disable	= disable_8259A_irq,
-	.unmask		= enable_8259A_irq,
-	.mask_ack	= mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-unsigned int cached_irq_mask = 0xffff;
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask |= mask;
-	if (irq & 8)
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-	else
-		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask &= mask;
-	if (irq & 8)
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-	else
-		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
-	unsigned int mask = 1<<irq;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	if (irq < 8)
-		ret = inb(PIC_MASTER_CMD) & mask;
-	else
-		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	io_apic_irqs &= ~(1<<irq);
-	set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
-				      "XT");
-	enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask = 1<<irq;
-
-	if (irq < 8) {
-		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
-		value = inb(PIC_MASTER_CMD) & irqmask;
-		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
-		return value;
-	}
-	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
-	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
-	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
-	return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
-	unsigned int irqmask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	/*
-	 * Lightweight spurious IRQ detection. We do not want
-	 * to overdo spurious IRQ handling - it's usually a sign
-	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecessarily.
-	 *
-	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
-	 * usually resulting from the 8259A-1|2 PICs) occur
-	 * even if the IRQ is masked in the 8259A. Thus we
-	 * can check spurious 8259A IRQs without doing the
-	 * quite slow i8259A_irq_real() call for every IRQ.
-	 * This does not cover 100% of spurious interrupts,
-	 * but should be enough to warn the user that there
-	 * is something bad going on ...
-	 */
-	if (cached_irq_mask & irqmask)
-		goto spurious_8259A_irq;
-	cached_irq_mask |= irqmask;
-
-handle_real_irq:
-	if (irq & 8) {
-		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
-		outb(cached_slave_mask, PIC_SLAVE_IMR);
-		/* 'Specific EOI' to slave */
-		outb(0x60+(irq&7),PIC_SLAVE_CMD);
-		 /* 'Specific EOI' to master-IRQ2 */
-		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD);
-	} else {
-		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
-		outb(cached_master_mask, PIC_MASTER_IMR);
-		/* 'Specific EOI' to master */
-		outb(0x60+irq,PIC_MASTER_CMD);
-	}
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-	return;
-
-spurious_8259A_irq:
-	/*
-	 * this is the slow path - should happen rarely.
-	 */
-	if (i8259A_irq_real(irq))
-		/*
-		 * oops, the IRQ _is_ in service according to the
-		 * 8259A - not spurious, go handle it.
-		 */
-		goto handle_real_irq;
-
-	{
-		static int spurious_irq_mask;
-		/*
-		 * At this point we can be sure the IRQ is spurious,
-		 * lets ACK and report it. [once per IRQ]
-		 */
-		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG
-			       "spurious 8259A interrupt: IRQ%d.\n", irq);
-			spurious_irq_mask |= irqmask;
-		}
-		atomic_inc(&irq_err_count);
-		/*
-		 * Theoretically we do not have to handle this IRQ,
-		 * but in Linux this does not cause problems and is
-		 * simpler for us.
-		 */
-		goto handle_real_irq;
-	}
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
-	outb(trigger[0], 0x4d0);
-	outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
-	/* IRQ 0,1,2,8,13 are marked as reserved */
-	trigger[0] = inb(0x4d0) & 0xF8;
-	trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
-	init_8259A(i8259A_auto_eoi);
-	restore_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
-	save_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
-	/* Put the i8259A into a quiescent state that
-	 * the kernel initialization code can get it
-	 * out of.
-	 */
-	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
-	return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
-	.name = "i8259",
-	.suspend = i8259A_suspend,
-	.resume = i8259A_resume,
-	.shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
-	.id	= 0,
-	.cls	= &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void init_8259A(int auto_eoi)
-{
-	unsigned long flags;
-
-	i8259A_auto_eoi = auto_eoi;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
-
-	/*
-	 * outb_pic - this has to work on a wide range of PC hardware.
-	 */
-	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
-	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
-	/* 8259A-1 (the master) has a slave on IR2 */
-	outb_pic(0x04, PIC_MASTER_IMR);
-	if (auto_eoi)	/* master does Auto EOI */
-		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
-	else		/* master expects normal EOI */
-		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
-
-	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
-	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
-	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
-	/* 8259A-2 is a slave on master's IR2 */
-	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
-	/* (slave's support for AEOI in flat mode is to be investigated) */
-	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
-
-	if (auto_eoi)
-		/*
-		 * In AEOI mode we just have to mask the interrupt
-		 * when acking.
-		 */
-		i8259A_chip.mask_ack = disable_8259A_irq;
-	else
-		i8259A_chip.mask_ack = mask_and_ack_8259A;
-
-	udelay(100);		/* wait for 8259A to initialize */
-
-	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
-	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-
-
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... IRQ0_VECTOR - 1] = -1,
-	[IRQ0_VECTOR] = 0,
-	[IRQ1_VECTOR] = 1,
-	[IRQ2_VECTOR] = 2,
-	[IRQ3_VECTOR] = 3,
-	[IRQ4_VECTOR] = 4,
-	[IRQ5_VECTOR] = 5,
-	[IRQ6_VECTOR] = 6,
-	[IRQ7_VECTOR] = 7,
-	[IRQ8_VECTOR] = 8,
-	[IRQ9_VECTOR] = 9,
-	[IRQ10_VECTOR] = 10,
-	[IRQ11_VECTOR] = 11,
-	[IRQ12_VECTOR] = 12,
-	[IRQ13_VECTOR] = 13,
-	[IRQ14_VECTOR] = 14,
-	[IRQ15_VECTOR] = 15,
-	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-void __init init_ISA_irqs (void)
-{
-	int i;
-
-	init_bsp_APIC();
-	init_8259A(0);
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-
-		if (i < 16) {
-			/*
-			 * 16 old-style INTA-cycle interrupts:
-			 */
-			set_irq_chip_and_handler_name(i, &i8259A_chip,
-						      handle_level_irq, "XT");
-		} else {
-			/*
-			 * 'high' PCI IRQs filled in on demand
-			 */
-			irq_desc[i].chip = &no_irq_chip;
-		}
-	}
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
-	int i;
-
-	init_ISA_irqs();
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (vector != IA32_SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-#ifdef CONFIG_SMP
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPIs for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
-	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* Low priority IPI to cleanup after moving an irq */
-	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-#endif
-	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
-	/* self generated IPI for local APIC timer */
-	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4dc8600d9d20..603261a5885c 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/bootmem.h>
 #include <linux/mc146818rtc.h>
 #include <linux/compiler.h>
 #include <linux/acpi.h>
@@ -58,7 +59,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 static DEFINE_SPINLOCK(ioapic_lock);
 static DEFINE_SPINLOCK(vector_lock);
 
-int timer_over_8254 __initdata = 1;
+int timer_through_8259 __initdata;
 
 /*
  *	Is the SiS APIC rmw bug present ?
@@ -72,15 +73,21 @@ int sis_apic_bug = -1;
 int nr_ioapic_registers[MAX_IO_APICS];
 
 /* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
 static int disable_timer_pin_1 __initdata;
 
 /*
@@ -110,7 +117,7 @@ struct io_apic {
 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 {
 	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
 }
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -239,7 +246,7 @@ static void __init replace_pin_at_irq(unsigned int irq,
 	}
 }
 
-static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
+static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable)
 {
 	struct irq_pin_list *entry = irq_2_pin + irq;
 	unsigned int pin, reg;
@@ -259,30 +266,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign
 }
 
 /* mask = 1 */
-static void __mask_IO_APIC_irq (unsigned int irq)
+static void __mask_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00010000, 0);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0);
 }
 
 /* mask = 0 */
-static void __unmask_IO_APIC_irq (unsigned int irq)
+static void __unmask_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0, 0x00010000);
+	__modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED);
 }
 
 /* mask = 1, trigger = 0 */
-static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
+static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED,
+				IO_APIC_REDIR_LEVEL_TRIGGER);
 }
 
 /* mask = 0, trigger = 1 */
-static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
+static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
 {
-	__modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
+	__modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER,
+				IO_APIC_REDIR_MASKED);
 }
 
-static void mask_IO_APIC_irq (unsigned int irq)
+static void mask_IO_APIC_irq(unsigned int irq)
 {
 	unsigned long flags;
 
@@ -291,7 +300,7 @@ static void mask_IO_APIC_irq (unsigned int irq)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void unmask_IO_APIC_irq (unsigned int irq)
+static void unmask_IO_APIC_irq(unsigned int irq)
 {
 	unsigned long flags;
 
@@ -303,7 +312,7 @@ static void unmask_IO_APIC_irq (unsigned int irq)
 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 {
 	struct IO_APIC_route_entry entry;
-	
+
 	/* Check delivery_mode to be sure we're not clearing an SMI pin */
 	entry = ioapic_read_entry(apic, pin);
 	if (entry.delivery_mode == dest_SMI)
@@ -315,7 +324,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 	ioapic_mask_entry(apic, pin);
 }
 
-static void clear_IO_APIC (void)
+static void clear_IO_APIC(void)
 {
 	int apic, pin;
 
@@ -332,7 +341,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 	struct irq_pin_list *entry = irq_2_pin + irq;
 	unsigned int apicid_value;
 	cpumask_t tmp;
-	
+
 	cpus_and(tmp, cpumask, cpu_online_map);
 	if (cpus_empty(tmp))
 		tmp = TARGET_CPUS;
@@ -361,7 +370,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 # include <linux/kernel_stat.h>	/* kstat */
 # include <linux/slab.h>		/* kmalloc() */
 # include <linux/timer.h>
- 
+
 #define IRQBALANCE_CHECK_ARCH -999
 #define MAX_BALANCED_IRQ_INTERVAL	(5*HZ)
 #define MIN_BALANCED_IRQ_INTERVAL	(HZ/2)
@@ -373,14 +382,14 @@ static int physical_balance __read_mostly;
 static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
 
 static struct irq_cpu_info {
-	unsigned long * last_irq;
-	unsigned long * irq_delta;
+	unsigned long *last_irq;
+	unsigned long *irq_delta;
 	unsigned long irq;
 } irq_cpu_data[NR_CPUS];
 
 #define CPU_IRQ(cpu)		(irq_cpu_data[cpu].irq)
-#define LAST_CPU_IRQ(cpu,irq)   (irq_cpu_data[cpu].last_irq[irq])
-#define IRQ_DELTA(cpu,irq) 	(irq_cpu_data[cpu].irq_delta[irq])
+#define LAST_CPU_IRQ(cpu, irq)   (irq_cpu_data[cpu].last_irq[irq])
+#define IRQ_DELTA(cpu, irq) 	(irq_cpu_data[cpu].irq_delta[irq])
 
 #define IDLE_ENOUGH(cpu,now) \
 	(idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
@@ -419,8 +428,8 @@ inside:
 			if (cpu == -1)
 				cpu = NR_CPUS-1;
 		}
-	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
-			(search_idle && !IDLE_ENOUGH(cpu,now)));
+	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) ||
+			(search_idle && !IDLE_ENOUGH(cpu, now)));
 
 	return cpu;
 }
@@ -430,15 +439,14 @@ static inline void balance_irq(int cpu, int irq)
 	unsigned long now = jiffies;
 	cpumask_t allowed_mask;
 	unsigned int new_cpu;
-		
+
 	if (irqbalance_disabled)
-		return; 
+		return;
 
 	cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
 	new_cpu = move(cpu, allowed_mask, now, 1);
-	if (cpu != new_cpu) {
+	if (cpu != new_cpu)
 		set_pending_irq(irq, cpumask_of_cpu(new_cpu));
-	}
 }
 
 static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
@@ -450,14 +458,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
 			if (!irq_desc[j].action)
 				continue;
 			/* Is it a significant load ?  */
-			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
+			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) <
 						useful_load_threshold)
 				continue;
 			balance_irq(i, j);
 		}
 	}
 	balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 	return;
 }
 
@@ -486,22 +494,22 @@ static void do_irq_balance(void)
 			/* Is this an active IRQ or balancing disabled ? */
 			if (!irq_desc[j].action || irq_balancing_disabled(j))
 				continue;
-			if ( package_index == i )
-				IRQ_DELTA(package_index,j) = 0;
+			if (package_index == i)
+				IRQ_DELTA(package_index, j) = 0;
 			/* Determine the total count per processor per IRQ */
 			value_now = (unsigned long) kstat_cpu(i).irqs[j];
 
 			/* Determine the activity per processor per IRQ */
-			delta = value_now - LAST_CPU_IRQ(i,j);
+			delta = value_now - LAST_CPU_IRQ(i, j);
 
 			/* Update last_cpu_irq[][] for the next time */
-			LAST_CPU_IRQ(i,j) = value_now;
+			LAST_CPU_IRQ(i, j) = value_now;
 
 			/* Ignore IRQs whose rate is less than the clock */
 			if (delta < useful_load_threshold)
 				continue;
 			/* update the load for the processor or package total */
-			IRQ_DELTA(package_index,j) += delta;
+			IRQ_DELTA(package_index, j) += delta;
 
 			/* Keep track of the higher numbered sibling as well */
 			if (i != package_index)
@@ -527,7 +535,8 @@ static void do_irq_balance(void)
 	max_cpu_irq = ULONG_MAX;
 
 tryanothercpu:
-	/* Look for heaviest loaded processor.
+	/*
+	 * Look for heaviest loaded processor.
 	 * We may come back to get the next heaviest loaded processor.
 	 * Skip processors with trivial loads.
 	 */
@@ -536,7 +545,7 @@ tryanothercpu:
 	for_each_online_cpu(i) {
 		if (i != CPU_TO_PACKAGEINDEX(i))
 			continue;
-		if (max_cpu_irq <= CPU_IRQ(i)) 
+		if (max_cpu_irq <= CPU_IRQ(i))
 			continue;
 		if (tmp_cpu_irq < CPU_IRQ(i)) {
 			tmp_cpu_irq = CPU_IRQ(i);
@@ -545,8 +554,9 @@ tryanothercpu:
 	}
 
 	if (tmp_loaded == -1) {
- 	 /* In the case of small number of heavy interrupt sources, 
-	  * loading some of the cpus too much. We use Ingo's original 
+	 /*
+	  * In the case of small number of heavy interrupt sources,
+	  * loading some of the cpus too much. We use Ingo's original
 	  * approach to rotate them around.
 	  */
 		if (!first_attempt && imbalance >= useful_load_threshold) {
@@ -555,13 +565,14 @@ tryanothercpu:
 		}
 		goto not_worth_the_effort;
 	}
-	
+
 	first_attempt = 0;		/* heaviest search */
 	max_cpu_irq = tmp_cpu_irq;	/* load */
 	max_loaded = tmp_loaded;	/* processor */
 	imbalance = (max_cpu_irq - min_cpu_irq) / 2;
-	
-	/* if imbalance is less than approx 10% of max load, then
+
+	/*
+	 * if imbalance is less than approx 10% of max load, then
 	 * observe diminishing returns action. - quit
 	 */
 	if (imbalance < (max_cpu_irq >> 3))
@@ -577,26 +588,25 @@ tryanotherirq:
 		/* Is this an active IRQ? */
 		if (!irq_desc[j].action)
 			continue;
-		if (imbalance <= IRQ_DELTA(max_loaded,j))
+		if (imbalance <= IRQ_DELTA(max_loaded, j))
 			continue;
 		/* Try to find the IRQ that is closest to the imbalance
 		 * without going over.
 		 */
-		if (move_this_load < IRQ_DELTA(max_loaded,j)) {
-			move_this_load = IRQ_DELTA(max_loaded,j);
+		if (move_this_load < IRQ_DELTA(max_loaded, j)) {
+			move_this_load = IRQ_DELTA(max_loaded, j);
 			selected_irq = j;
 		}
 	}
-	if (selected_irq == -1) {
+	if (selected_irq == -1)
 		goto tryanothercpu;
-	}
 
 	imbalance = move_this_load;
-	
+
 	/* For physical_balance case, we accumulated both load
 	 * values in the one of the siblings cpu_irq[],
 	 * to use the same code for physical and logical processors
-	 * as much as possible. 
+	 * as much as possible.
 	 *
 	 * NOTE: the cpu_irq[] array holds the sum of the load for
 	 * sibling A and sibling B in the slot for the lowest numbered
@@ -625,11 +635,11 @@ tryanotherirq:
 		/* mark for change destination */
 		set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
 
-		/* Since we made a change, come back sooner to 
+		/* Since we made a change, come back sooner to
 		 * check for more variation.
 		 */
 		balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
-			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 		return;
 	}
 	goto tryanotherirq;
@@ -640,7 +650,7 @@ not_worth_the_effort:
 	 * upward
 	 */
 	balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
-		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);	
+		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
 	return;
 }
 
@@ -679,13 +689,13 @@ static int __init balanced_irq_init(void)
 	cpumask_t tmp;
 
 	cpus_shift_right(tmp, cpu_online_map, 2);
-        c = &boot_cpu_data;
+	c = &boot_cpu_data;
 	/* When not overwritten by the command line ask subarchitecture. */
 	if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
 		irqbalance_disabled = NO_BALANCE_IRQ;
 	if (irqbalance_disabled)
 		return 0;
-	
+
 	 /* disable irqbalance completely if there is only one processor online */
 	if (num_online_cpus() < 2) {
 		irqbalance_disabled = 1;
@@ -699,16 +709,14 @@ static int __init balanced_irq_init(void)
 		physical_balance = 1;
 
 	for_each_online_cpu(i) {
-		irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
-		irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
 		if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
 			printk(KERN_ERR "balanced_irq_init: out of memory");
 			goto failed;
 		}
-		memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
-		memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
 	}
-	
+
 	printk(KERN_INFO "Starting balanced_irq\n");
 	if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd")))
 		return 0;
@@ -801,10 +809,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == type &&
-		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
-		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mpc_dstirq == pin)
+		if (mp_irqs[i].mp_irqtype == type &&
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mp_dstirq == pin)
 			return i;
 
 	return -1;
@@ -818,13 +826,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 
-			return mp_irqs[i].mpc_dstirq;
+			return mp_irqs[i].mp_dstirq;
 	}
 	return -1;
 }
@@ -834,17 +842,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+		for (apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
 				return apic;
 		}
 	}
@@ -864,28 +872,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
 		"slot:%d, pin:%d.\n", bus, slot, pin);
-	if (mp_bus_id_to_pci_bus[bus] == -1) {
+	if (test_bit(bus, mp_bus_not_pci)) {
 		printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
-			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mpc_irqtype &&
+		    !mp_irqs[i].mp_irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].mp_dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -900,7 +908,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 
 /*
- * This function currently is only a helper for the i386 smp boot process where 
+ * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
  * so mask in all cases should simply be TARGET_CPUS
  */
@@ -952,7 +960,7 @@ static int EISA_ELCR(unsigned int irq)
  * EISA conforming in the MP table, that means its trigger type must
  * be read in from the ELCR */
 
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
 /* PCI interrupts are always polarity one level triggered,
@@ -969,118 +977,115 @@ static int EISA_ELCR(unsigned int irq)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mpc_irqflag & 3)
+	switch (mp_irqs[idx].mp_irqflag & 3) {
+	case 0: /* conforms, ie. bus-type dependent polarity */
 	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-		{
-			polarity = test_bit(bus, mp_bus_not_pci)?
-				default_ISA_polarity(idx):
-				default_PCI_polarity(idx);
-			break;
-		}
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
+		polarity = test_bit(bus, mp_bus_not_pci)?
+			default_ISA_polarity(idx):
+			default_PCI_polarity(idx);
+		break;
+	}
+	case 1: /* high active */
+	{
+		polarity = 0;
+		break;
+	}
+	case 2: /* reserved */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		polarity = 1;
+		break;
+	}
+	case 3: /* low active */
+	{
+		polarity = 1;
+		break;
+	}
+	default: /* invalid */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		polarity = 1;
+		break;
+	}
 	}
 	return polarity;
 }
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].mp_irqflag>>2) & 3) {
+	case 0: /* conforms, ie. bus-type dependent */
 	{
-		case 0: /* conforms, ie. bus-type dependent */
-		{
-			trigger = test_bit(bus, mp_bus_not_pci)?
-					default_ISA_trigger(idx):
-					default_PCI_trigger(idx);
+		trigger = test_bit(bus, mp_bus_not_pci)?
+				default_ISA_trigger(idx):
+				default_PCI_trigger(idx);
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-			switch (mp_bus_id_to_type[bus])
-			{
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
-				default:
-				{
-					printk(KERN_WARNING "broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
-#endif
+		switch (mp_bus_id_to_type[bus]) {
+		case MP_BUS_ISA: /* ISA pin */
+		{
+			/* set before the switch */
 			break;
 		}
-		case 1: /* edge */
+		case MP_BUS_EISA: /* EISA pin */
 		{
-			trigger = 0;
+			trigger = default_EISA_trigger(idx);
 			break;
 		}
-		case 2: /* reserved */
+		case MP_BUS_PCI: /* PCI pin */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
+			/* set before the switch */
 			break;
 		}
-		case 3: /* level */
+		case MP_BUS_MCA: /* MCA pin */
 		{
-			trigger = 1;
+			trigger = default_MCA_trigger(idx);
 			break;
 		}
-		default: /* invalid */
+		default:
 		{
 			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
+			trigger = 1;
 			break;
 		}
 	}
+#endif
+		break;
+	}
+	case 1: /* edge */
+	{
+		trigger = 0;
+		break;
+	}
+	case 2: /* reserved */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		trigger = 1;
+		break;
+	}
+	case 3: /* level */
+	{
+		trigger = 1;
+		break;
+	}
+	default: /* invalid */
+	{
+		printk(KERN_WARNING "broken BIOS!!\n");
+		trigger = 0;
+		break;
+	}
+	}
 	return trigger;
 }
 
@@ -1097,16 +1102,16 @@ static inline int irq_trigger(int idx)
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mpc_dstirq != pin)
+	if (mp_irqs[idx].mp_dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci))
-		irq = mp_irqs[idx].mpc_srcbusirq;
+		irq = mp_irqs[idx].mp_srcbusirq;
 	else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -1148,8 +1153,8 @@ static inline int IO_APIC_irq_trigger(int irq)
 
 	for (apic = 0; apic < nr_ioapics; apic++) {
 		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			idx = find_irq_entry(apic,pin,mp_INT);
-			if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
+			idx = find_irq_entry(apic, pin, mp_INT);
+			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
 				return irq_trigger(idx);
 		}
 	}
@@ -1164,7 +1169,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }
 
 static int __assign_irq_vector(int irq)
 {
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+	static int current_vector = FIRST_DEVICE_VECTOR, current_offset;
 	int vector, offset;
 
 	BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
@@ -1176,7 +1181,7 @@ static int __assign_irq_vector(int irq)
 	offset = current_offset;
 next:
 	vector += 8;
-	if (vector >= FIRST_SYSTEM_VECTOR) {
+	if (vector >= first_system_vector) {
 		offset = (offset + 1) % 8;
 		vector = FIRST_DEVICE_VECTOR + offset;
 	}
@@ -1203,6 +1208,11 @@ static int assign_irq_vector(int irq)
 
 	return vector;
 }
+
+void setup_vector_irq(int cpu)
+{
+}
+
 static struct irq_chip ioapic_chip;
 
 #define IOAPIC_AUTO	-1
@@ -1237,25 +1247,25 @@ static void __init setup_IO_APIC_irqs(void)
 		/*
 		 * add it to the IO-APIC irq-routing table:
 		 */
-		memset(&entry,0,sizeof(entry));
+		memset(&entry, 0, sizeof(entry));
 
 		entry.delivery_mode = INT_DELIVERY_MODE;
 		entry.dest_mode = INT_DEST_MODE;
 		entry.mask = 0;				/* enable IRQ */
-		entry.dest.logical.logical_dest = 
+		entry.dest.logical.logical_dest =
 					cpu_mask_to_apicid(TARGET_CPUS);
 
-		idx = find_irq_entry(apic,pin,mp_INT);
+		idx = find_irq_entry(apic, pin, mp_INT);
 		if (idx == -1) {
 			if (first_notcon) {
 				apic_printk(APIC_VERBOSE, KERN_DEBUG
 						" IO-APIC (apicid-pin) %d-%d",
-						mp_ioapics[apic].mpc_apicid,
+						mp_ioapics[apic].mp_apicid,
 						pin);
 				first_notcon = 0;
 			} else
 				apic_printk(APIC_VERBOSE, ", %d-%d",
-					mp_ioapics[apic].mpc_apicid, pin);
+					mp_ioapics[apic].mp_apicid, pin);
 			continue;
 		}
 
@@ -1289,7 +1299,7 @@ static void __init setup_IO_APIC_irqs(void)
 			vector = assign_irq_vector(irq);
 			entry.vector = vector;
 			ioapic_register_intr(irq, vector, IOAPIC_AUTO);
-		
+
 			if (!apic && (irq < 16))
 				disable_8259A_irq(irq);
 		}
@@ -1302,25 +1312,21 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
- * Set up the 8259A-master output pin:
+ * Set up the timer pin, possibly with the 8259A-master behind.
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+					int vector)
 {
 	struct IO_APIC_route_entry entry;
 
-	memset(&entry,0,sizeof(entry));
-
-	disable_8259A_irq(0);
-
-	/* mask LVT0 */
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	memset(&entry, 0, sizeof(entry));
 
 	/*
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
 	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 0;					/* unmask IRQ now */
+	entry.mask = 1;					/* mask IRQ now */
 	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.polarity = 0;
@@ -1329,17 +1335,14 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 
 	/*
 	 * The timer IRQ doesn't have to know that behind the
-	 * scene we have a 8259A-master in AEOI mode ...
+	 * scene we may have a 8259A-master in AEOI mode ...
 	 */
-	irq_desc[0].chip = &ioapic_chip;
-	set_irq_handler(0, handle_edge_irq);
+	ioapic_register_intr(0, vector, IOAPIC_EDGE);
 
 	/*
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	ioapic_write_entry(apic, pin, entry);
-
-	enable_8259A_irq(0);
 }
 
 void __init print_IO_APIC(void)
@@ -1354,10 +1357,10 @@ void __init print_IO_APIC(void)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
- 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
 
 	/*
 	 * We are a bit conservative about what we expect.  We have to
@@ -1376,7 +1379,7 @@ void __init print_IO_APIC(void)
 		reg_03.raw = io_apic_read(apic, 3);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
@@ -1459,7 +1462,7 @@ void __init print_IO_APIC(void)
 
 #if 0
 
-static void print_APIC_bitfield (int base)
+static void print_APIC_bitfield(int base)
 {
 	unsigned int v;
 	int i, j;
@@ -1480,7 +1483,7 @@ static void print_APIC_bitfield (int base)
 	}
 }
 
-void /*__init*/ print_local_APIC(void * dummy)
+void /*__init*/ print_local_APIC(void *dummy)
 {
 	unsigned int v, ver, maxlvt;
 
@@ -1489,6 +1492,7 @@ void /*__init*/ print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
 			GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
@@ -1563,7 +1567,7 @@ void /*__init*/ print_local_APIC(void * dummy)
 	printk("\n");
 }
 
-void print_all_local_APICs (void)
+void print_all_local_APICs(void)
 {
 	on_each_cpu(print_local_APIC, NULL, 1, 1);
 }
@@ -1586,11 +1590,11 @@ void /*__init*/ print_PIC(void)
 	v = inb(0xa0) << 8 | inb(0x20);
 	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
 
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
+	outb(0x0b, 0xa0);
+	outb(0x0b, 0x20);
 	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
+	outb(0x0a, 0xa0);
+	outb(0x0a, 0x20);
 
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 
@@ -1626,7 +1630,7 @@ static void __init enable_IO_APIC(void)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
 	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
+	for (apic = 0; apic < nr_ioapics; apic++) {
 		int pin;
 		/* See if any of the pins is in ExtINT mode */
 		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
@@ -1716,7 +1720,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -1726,6 +1729,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.
@@ -1748,15 +1756,15 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		
-		old_id = mp_ioapics[apic].mpc_apicid;
 
-		if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+		old_id = mp_ioapics[apic].mp_apicid;
+
+		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].mpc_apicid);
+				apic, mp_ioapics[apic].mp_apicid);
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				reg_00.bits.ID);
-			mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
 		}
 
 		/*
@@ -1765,9 +1773,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
 		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].mpc_apicid)) {
+					mp_ioapics[apic].mp_apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].mpc_apicid);
+				apic, mp_ioapics[apic].mp_apicid);
 			for (i = 0; i < get_physical_broadcast(); i++)
 				if (!physid_isset(i, phys_id_present_map))
 					break;
@@ -1776,13 +1784,13 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				i);
 			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].mpc_apicid = i;
+			mp_ioapics[apic].mp_apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
-					mp_ioapics[apic].mpc_apicid);
+					mp_ioapics[apic].mp_apicid);
 			physids_or(phys_id_present_map, phys_id_present_map, tmp);
 		}
 
@@ -1791,21 +1799,21 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * We need to adjust the IRQ routing table
 		 * if the ID changed.
 		 */
-		if (old_id != mp_ioapics[apic].mpc_apicid)
+		if (old_id != mp_ioapics[apic].mp_apicid)
 			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mpc_dstapic == old_id)
-					mp_irqs[i].mpc_dstapic
-						= mp_ioapics[apic].mpc_apicid;
+				if (mp_irqs[i].mp_dstapic == old_id)
+					mp_irqs[i].mp_dstapic
+						= mp_ioapics[apic].mp_apicid;
 
 		/*
 		 * Read the right value from the MPC table and
 		 * write it into the ID register.
-	 	 */
+		 */
 		apic_printk(APIC_VERBOSE, KERN_INFO
 			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].mpc_apicid);
+			mp_ioapics[apic].mp_apicid);
 
-		reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
 		spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(apic, 0, reg_00.raw);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -1816,15 +1824,12 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
 			printk("could not set ID!\n");
 		else
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 
@@ -2015,12 +2020,12 @@ static inline void init_IO_APIC_traps(void)
  * The local APIC irq-chip implementation:
  */
 
-static void ack_apic(unsigned int irq)
+static void ack_lapic_irq(unsigned int irq)
 {
 	ack_APIC_irq();
 }
 
-static void mask_lapic_irq (unsigned int irq)
+static void mask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -2028,7 +2033,7 @@ static void mask_lapic_irq (unsigned int irq)
 	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
 }
 
-static void unmask_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -2037,23 +2042,31 @@ static void unmask_lapic_irq (unsigned int irq)
 }
 
 static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC-edge",
+	.name		= "local-APIC",
 	.mask		= mask_lapic_irq,
 	.unmask		= unmask_lapic_irq,
-	.eoi		= ack_apic,
+	.ack		= ack_lapic_irq,
 };
 
+static void lapic_register_intr(int irq, int vector)
+{
+	irq_desc[irq].status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+	set_intr_gate(vector, interrupt[irq]);
+}
+
 static void __init setup_nmi(void)
 {
 	/*
- 	 * Dirty trick to enable the NMI watchdog ...
+	 * Dirty trick to enable the NMI watchdog ...
 	 * We put the 8259A master into AEOI mode and
 	 * unmask on all local APICs LVT0 as NMI.
 	 *
 	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
 	 * is from Maciej W. Rozycki - so we do not have to EOI from
 	 * the NMI handler or the timer interrupt.
-	 */ 
+	 */
 	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
 
 	enable_NMI_through_LVT0();
@@ -2129,11 +2142,16 @@ static inline void __init unlock_ExtINT_logic(void)
 static inline void __init check_timer(void)
 {
 	int apic1, pin1, apic2, pin2;
+	int no_pin1 = 0;
 	int vector;
+	unsigned int ver;
 	unsigned long flags;
 
 	local_irq_save(flags);
 
+	ver = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(ver);
+
 	/*
 	 * get/set the timer IRQ vector:
 	 */
@@ -2142,17 +2160,17 @@ static inline void __init check_timer(void)
 	set_intr_gate(vector, interrupt[0]);
 
 	/*
-	 * Subtle, code in do_timer_interrupt() expects an AEOI
-	 * mode for the 8259A whenever interrupts are routed
-	 * through I/O APICs.  Also IRQ0 has to be enabled in
-	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.  Also
+	 * timer interrupts need to be acknowledged manually in
+	 * the 8259A for the i82489DX when using the NMI
+	 * watchdog as that APIC treats NMIs as level-triggered.
+	 * The AEOI mode will finish them in the 8259A
+	 * automatically.
 	 */
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	timer_ack = 1;
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
+	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2162,14 +2180,33 @@ static inline void __init check_timer(void)
 	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		vector, apic1, pin1, apic2, pin2);
 
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
+
 	if (pin1 != -1) {
 		/*
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
+		if (no_pin1) {
+			add_pin_to_irq(0, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, vector);
+		}
 		unmask_IO_APIC_irq(0);
 		if (timer_irq_works()) {
 			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
 				setup_nmi();
 				enable_8259A_irq(0);
 			}
@@ -2178,45 +2215,47 @@ static inline void __init check_timer(void)
 			goto out;
 		}
 		clear_IO_APIC_pin(apic1, pin1);
-		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
-				"IO-APIC\n");
-	}
+		if (!no_pin1)
+			printk(KERN_ERR "..MP-BIOS bug: "
+			       "8254 timer not connected to IO-APIC\n");
 
-	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
-	if (pin2 != -1) {
+		printk(KERN_INFO "...trying to set up timer (IRQ0) "
+		       "through the 8259A ... ");
 		printk("\n..... (found pin %d) ...", pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
+		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, vector);
+		unmask_IO_APIC_irq(0);
+		enable_8259A_irq(0);
 		if (timer_irq_works()) {
 			printk("works.\n");
-			if (pin1 != -1)
-				replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
-			else
-				add_pin_to_irq(0, apic2, pin2);
+			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
 				setup_nmi();
+				enable_8259A_irq(0);
 			}
 			goto out;
 		}
 		/*
 		 * Cleanup, just in case ...
 		 */
+		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
+		printk(" failed.\n");
 	}
-	printk(" failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = 0;
+		nmi_watchdog = NMI_NONE;
 	}
+	timer_ack = 0;
 
 	printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
 
-	disable_8259A_irq(0);
-	set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
-				      "fasteoi");
+	lapic_register_intr(0, vector);
 	apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
@@ -2224,12 +2263,12 @@ static inline void __init check_timer(void)
 		printk(" works.\n");
 		goto out;
 	}
+	disable_8259A_irq(0);
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
 	printk(" failed.\n");
 
 	printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
 
-	timer_ack = 0;
 	init_8259A(0);
 	make_8259A_irq(0);
 	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
@@ -2248,11 +2287,21 @@ out:
 }
 
 /*
- *
- * IRQ's that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- *   Linux doesn't really care, as it's not actually used
- *   for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
  */
 #define PIC_IRQS	(1 << PIC_CASCADE_IR)
 
@@ -2261,15 +2310,12 @@ void __init setup_IO_APIC(void)
 	int i;
 
 	/* Reserve all the system vectors. */
-	for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++)
+	for (i = first_system_vector; i < NR_VECTORS; i++)
 		set_bit(i, used_vectors);
 
 	enable_IO_APIC();
 
-	if (acpi_ioapic)
-		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
-	else
-		io_apic_irqs = ~PIC_IRQS;
+	io_apic_irqs = ~PIC_IRQS;
 
 	printk("ENABLING IO-APIC IRQs\n");
 
@@ -2286,28 +2332,14 @@ void __init setup_IO_APIC(void)
 		print_IO_APIC();
 }
 
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path
  */
- 
+
 static int __init io_apic_bug_finalize(void)
 {
-	if(sis_apic_bug == -1)
+	if (sis_apic_bug == -1)
 		sis_apic_bug = 0;
 	return 0;
 }
@@ -2318,17 +2350,17 @@ struct sysfs_ioapic_data {
 	struct sys_device dev;
 	struct IO_APIC_route_entry entry[0];
 };
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS];
 
 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
 {
 	struct IO_APIC_route_entry *entry;
 	struct sysfs_ioapic_data *data;
 	int i;
-	
+
 	data = container_of(dev, struct sysfs_ioapic_data, dev);
 	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
 		entry[i] = ioapic_read_entry(dev->id, i);
 
 	return 0;
@@ -2341,18 +2373,18 @@ static int ioapic_resume(struct sys_device *dev)
 	unsigned long flags;
 	union IO_APIC_reg_00 reg_00;
 	int i;
-	
+
 	data = container_of(dev, struct sysfs_ioapic_data, dev);
 	entry = data->entry;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
 		ioapic_write_entry(dev->id, i, entry[i]);
 
 	return 0;
@@ -2366,24 +2398,23 @@ static struct sysdev_class ioapic_sysdev_class = {
 
 static int __init ioapic_init_sysfs(void)
 {
-	struct sys_device * dev;
+	struct sys_device *dev;
 	int i, size, error = 0;
 
 	error = sysdev_class_register(&ioapic_sysdev_class);
 	if (error)
 		return error;
 
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i] 
+	for (i = 0; i < nr_ioapics; i++) {
+		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
 			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
+		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
 		if (!mp_ioapic_data[i]) {
 			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
 			continue;
 		}
-		memset(mp_ioapic_data[i], 0, size);
 		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i; 
+		dev->id = i;
 		dev->cls = &ioapic_sysdev_class;
 		error = sysdev_register(dev);
 		if (error) {
@@ -2458,7 +2489,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->address_lo =
 			MSI_ADDR_BASE_LO |
 			((INT_DEST_MODE == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
+MSI_ADDR_DEST_MODE_PHYSICAL:
 				MSI_ADDR_DEST_MODE_LOGICAL) |
 			((INT_DELIVERY_MODE != dest_LowestPrio) ?
 				MSI_ADDR_REDIRECTION_CPU:
@@ -2469,7 +2500,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 			MSI_DATA_TRIGGER_EDGE |
 			MSI_DATA_LEVEL_ASSERT |
 			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
+MSI_DATA_DELIVERY_FIXED:
 				MSI_DATA_DELIVERY_LOWPRI) |
 			MSI_DATA_VECTOR(vector);
 	}
@@ -2640,12 +2671,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 #endif /* CONFIG_HT_IRQ */
 
 /* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
+			ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
 
 #ifdef CONFIG_ACPI
 
-int __init io_apic_get_unique_id (int ioapic, int apic_id)
+int __init io_apic_get_unique_id(int ioapic, int apic_id)
 {
 	union IO_APIC_reg_00 reg_00;
 	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
@@ -2654,10 +2685,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	int i = 0;
 
 	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC 
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only 
+	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
+	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
 	 * supports up to 16 on one shared APIC bus.
-	 * 
+	 *
 	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
 	 *      advantage of new APIC bus architecture.
 	 */
@@ -2676,7 +2707,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	}
 
 	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice 
+	 * Every APIC in a system must have a unique ID or we get lots of nice
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
 	if (check_apicid_used(apic_id_map, apic_id)) {
@@ -2693,7 +2724,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 			"trying %d\n", ioapic, apic_id, i);
 
 		apic_id = i;
-	} 
+	}
 
 	tmp = apicid_to_cpu_present(apic_id);
 	physids_or(apic_id_map, apic_id_map, tmp);
@@ -2720,7 +2751,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 }
 
 
-int __init io_apic_get_version (int ioapic)
+int __init io_apic_get_version(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
@@ -2733,7 +2764,7 @@ int __init io_apic_get_version (int ioapic)
 }
 
 
-int __init io_apic_get_redir_entries (int ioapic)
+int __init io_apic_get_redir_entries(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
@@ -2746,7 +2777,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low)
 {
 	struct IO_APIC_route_entry entry;
 
@@ -2762,7 +2793,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	 * corresponding device driver registers for this IRQ.
 	 */
 
-	memset(&entry,0,sizeof(entry));
+	memset(&entry, 0, sizeof(entry));
 
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
@@ -2781,7 +2812,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 
 	apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
 		"(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
-		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
+		mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq,
 		edge_level, active_high_low);
 
 	ioapic_register_intr(irq, entry.vector, edge_level);
@@ -2802,8 +2833,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == mp_INT &&
-		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+		if (mp_irqs[i].mp_irqtype == mp_INT &&
+		    mp_irqs[i].mp_srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;
@@ -2836,3 +2867,34 @@ static int __init parse_noapic(char *arg)
 	return 0;
 }
 early_param("noapic", parse_noapic);
+
+void __init ioapic_init_mappings(void)
+{
+	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+	int i;
+
+	for (i = 0; i < nr_ioapics; i++) {
+		if (smp_found_config) {
+			ioapic_phys = mp_ioapics[i].mp_apicaddr;
+			if (!ioapic_phys) {
+				printk(KERN_ERR
+				       "WARNING: bogus zero IO-APIC "
+				       "address found in MPTABLE, "
+				       "disabling IO/APIC support!\n");
+				smp_found_config = 0;
+				skip_ioapic_setup = 1;
+				goto fake_ioapic_page;
+			}
+		} else {
+fake_ioapic_page:
+			ioapic_phys = (unsigned long)
+				      alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = __pa(ioapic_phys);
+		}
+		set_fixmap_nocache(idx, ioapic_phys);
+		printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
+		       __fix_to_virt(idx), ioapic_phys);
+		idx++;
+	}
+}
+
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8dfcc529..b16ef029cf88 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -61,7 +61,7 @@ struct irq_cfg {
 };
 
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
+static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
 	[0]  = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
 	[1]  = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
 	[2]  = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
@@ -82,6 +82,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
 
 static int assign_irq_vector(int irq, cpumask_t mask);
 
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
 #define __apicdebuginit  __init
 
 int sis_apic_bug; /* not actually supported, dummy for compile */
@@ -90,7 +94,7 @@ static int no_timer_check;
 
 static int disable_timer_pin_1 __initdata;
 
-int timer_over_8254 __initdata = 1;
+int timer_through_8259 __initdata;
 
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@@ -104,15 +108,17 @@ DEFINE_SPINLOCK(vector_lock);
 int nr_ioapic_registers[MAX_IO_APICS];
 
 /* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
 /*
  * Rough estimation of how many shared IRQs there are, can
  * be changed anytime.
@@ -140,7 +146,7 @@ struct io_apic {
 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 {
 	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
 }
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -183,7 +189,7 @@ static bool io_apic_level_ack_pending(unsigned int irq)
 			break;
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
-		if ((reg >> 14) & 1) {
+		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
 			spin_unlock_irqrestore(&ioapic_lock, flags);
 			return true;
 		}
@@ -298,7 +304,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
 			break;
 		io_apic_write(apic, 0x11 + pin*2, dest);
 		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~0x000000ff;
+		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
 		reg |= vector;
 		io_apic_modify(apic, reg);
 		if (!entry->next)
@@ -360,16 +366,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 	entry->pin = pin;
 }
 
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+				      int oldapic, int oldpin,
+				      int newapic, int newpin)
+{
+	struct irq_pin_list *entry = irq_2_pin + irq;
+
+	while (1) {
+		if (entry->apic == oldapic && entry->pin == oldpin) {
+			entry->apic = newapic;
+			entry->pin = newpin;
+		}
+		if (!entry->next)
+			break;
+		entry = irq_2_pin + entry->next;
+	}
+}
+
 
 #define DO_ACTION(name,R,ACTION, FINAL)					\
 									\
 	static void name##_IO_APIC_irq (unsigned int irq)		\
 	__DO_ACTION(R, ACTION, FINAL)
 
-DO_ACTION( __mask,             0, |= 0x00010000, io_apic_sync(entry->apic) )
-						/* mask = 1 */
-DO_ACTION( __unmask,           0, &= 0xfffeffff, )
-						/* mask = 0 */
+/* mask = 1 */
+DO_ACTION(__mask,	0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic))
+
+/* mask = 0 */
+DO_ACTION(__unmask,	0, &= ~IO_APIC_REDIR_MASKED, )
 
 static void mask_IO_APIC_irq (unsigned int irq)
 {
@@ -430,20 +457,6 @@ static int __init disable_timer_pin_setup(char *arg)
 }
 __setup("disable_timer_pin_1", disable_timer_pin_setup);
 
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
 
 /*
  * Find the IRQ entry number of a certain pin.
@@ -453,10 +466,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == type &&
-		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
-		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mpc_dstirq == pin)
+		if (mp_irqs[i].mp_irqtype == type &&
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mp_dstirq == pin)
 			return i;
 
 	return -1;
@@ -470,13 +483,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 
-			return mp_irqs[i].mpc_dstirq;
+			return mp_irqs[i].mp_dstirq;
 	}
 	return -1;
 }
@@ -486,17 +499,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
+		    (mp_irqs[i].mp_irqtype == type) &&
+		    (mp_irqs[i].mp_srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
 		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
 				return apic;
 		}
 	}
@@ -516,28 +529,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
 		bus, slot, pin);
-	if (mp_bus_id_to_pci_bus[bus] == -1) {
+	if (test_bit(bus, mp_bus_not_pci)) {
 		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
+		int lbus = mp_irqs[i].mp_srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
-			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mpc_irqtype &&
+		    !mp_irqs[i].mp_irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -565,13 +578,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mpc_irqflag & 3)
+	switch (mp_irqs[idx].mp_irqflag & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent polarity */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -607,13 +620,13 @@ static int MPBIOS_polarity(int idx)
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -660,16 +673,16 @@ static inline int irq_trigger(int idx)
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mpc_srcbus;
+	int bus = mp_irqs[idx].mp_srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mpc_dstirq != pin)
+	if (mp_irqs[idx].mp_dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mpc_srcbusirq;
+		irq = mp_irqs[idx].mp_srcbusirq;
 	} else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -730,7 +743,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 		offset = current_offset;
 next:
 		vector += 8;
-		if (vector >= FIRST_SYSTEM_VECTOR) {
+		if (vector >= first_system_vector) {
 			/* If we run out of vectors on large boxen, must share them. */
 			offset = (offset + 1) % 8;
 			vector = FIRST_DEVICE_VECTOR + offset;
@@ -788,7 +801,7 @@ static void __clear_irq_vector(int irq)
 	cpus_clear(cfg->domain);
 }
 
-void __setup_vector_irq(int cpu)
+static void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	/* This function must be called with vector_lock held */
@@ -811,6 +824,13 @@ void __setup_vector_irq(int cpu)
 	}
 }
 
+void setup_vector_irq(int cpu)
+{
+	spin_lock(&vector_lock);
+	__setup_vector_irq(smp_processor_id());
+	spin_unlock(&vector_lock);
+}
+
 
 static struct irq_chip ioapic_chip;
 
@@ -846,7 +866,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
 		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
+		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
 		    irq, trigger, polarity);
 
 	/*
@@ -887,10 +907,10 @@ static void __init setup_IO_APIC_irqs(void)
 		idx = find_irq_entry(apic,pin,mp_INT);
 		if (idx == -1) {
 			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
 				first_notcon = 0;
 			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
 			continue;
 		}
 		if (!first_notcon) {
@@ -911,26 +931,21 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
- * Set up the 8259A-master output pin as broadcast to all
- * CPUs.
+ * Set up the timer pin, possibly with the 8259A-master behind.
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
+static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+					int vector)
 {
 	struct IO_APIC_route_entry entry;
 
 	memset(&entry, 0, sizeof(entry));
 
-	disable_8259A_irq(0);
-
-	/* mask LVT0 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-
 	/*
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
 	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 0;					/* unmask IRQ now */
+	entry.mask = 1;					/* mask IRQ now */
 	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.polarity = 0;
@@ -939,7 +954,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 
 	/*
 	 * The timer IRQ doesn't have to know that behind the
-	 * scene we have a 8259A-master in AEOI mode ...
+	 * scene we may have a 8259A-master in AEOI mode ...
 	 */
 	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
 
@@ -947,8 +962,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	ioapic_write_entry(apic, pin, entry);
-
-	enable_8259A_irq(0);
 }
 
 void __apicdebuginit print_IO_APIC(void)
@@ -965,7 +978,7 @@ void __apicdebuginit print_IO_APIC(void)
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
 
 	/*
 	 * We are a bit conservative about what we expect.  We have to
@@ -983,7 +996,7 @@ void __apicdebuginit print_IO_APIC(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 
@@ -1077,6 +1090,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
@@ -1540,7 +1554,7 @@ static inline void init_IO_APIC_traps(void)
 	}
 }
 
-static void enable_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -1548,7 +1562,7 @@ static void enable_lapic_irq (unsigned int irq)
 	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
-static void disable_lapic_irq (unsigned int irq)
+static void mask_lapic_irq(unsigned int irq)
 {
 	unsigned long v;
 
@@ -1561,19 +1575,20 @@ static void ack_lapic_irq (unsigned int irq)
 	ack_APIC_irq();
 }
 
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
-
-static struct hw_interrupt_type lapic_irq_type __read_mostly = {
-	.name = "local-APIC",
-	.typename = "local-APIC-edge",
-	.startup = NULL, /* startup_irq() not used for IRQ0 */
-	.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
-	.enable = enable_lapic_irq,
-	.disable = disable_lapic_irq,
-	.ack = ack_lapic_irq,
-	.end = end_lapic_irq,
+static struct irq_chip lapic_chip __read_mostly = {
+	.name		= "local-APIC",
+	.mask		= mask_lapic_irq,
+	.unmask		= unmask_lapic_irq,
+	.ack		= ack_lapic_irq,
 };
 
+static void lapic_register_intr(int irq)
+{
+	irq_desc[irq].status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+}
+
 static void __init setup_nmi(void)
 {
 	/*
@@ -1659,6 +1674,7 @@ static inline void __init check_timer(void)
 	struct irq_cfg *cfg = irq_cfg + 0;
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
+	int no_pin1 = 0;
 
 	local_irq_save(flags);
 
@@ -1669,16 +1685,11 @@ static inline void __init check_timer(void)
 	assign_irq_vector(0, TARGET_CPUS);
 
 	/*
-	 * Subtle, code in do_timer_interrupt() expects an AEOI
-	 * mode for the 8259A whenever interrupts are routed
-	 * through I/O APICs.  Also IRQ0 has to be enabled in
-	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -1688,15 +1699,33 @@ static inline void __init check_timer(void)
 	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		cfg->vector, apic1, pin1, apic2, pin2);
 
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
+
 	if (pin1 != -1) {
 		/*
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
+		if (no_pin1) {
+			add_pin_to_irq(0, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+		}
 		unmask_IO_APIC_irq(0);
 		if (!no_timer_check && timer_irq_works()) {
-			nmi_watchdog_default();
 			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
 				setup_nmi();
 				enable_8259A_irq(0);
 			}
@@ -1705,43 +1734,48 @@ static inline void __init check_timer(void)
 			goto out;
 		}
 		clear_IO_APIC_pin(apic1, pin1);
-		apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
-				"connected to IO-APIC\n");
-	}
+		if (!no_pin1)
+			apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
-				"through the 8259A ... ");
-	if (pin2 != -1) {
+		apic_printk(APIC_VERBOSE,KERN_INFO
+			"...trying to set up timer (IRQ0) "
+			"through the 8259A ... ");
 		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
 			apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector);
+		replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		unmask_IO_APIC_irq(0);
+		enable_8259A_irq(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_VERBOSE," works.\n");
-			nmi_watchdog_default();
+			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
 				setup_nmi();
+				enable_8259A_irq(0);
 			}
 			goto out;
 		}
 		/*
 		 * Cleanup, just in case ...
 		 */
+		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
+		apic_printk(APIC_VERBOSE," failed.\n");
 	}
-	apic_printk(APIC_VERBOSE," failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = 0;
+		nmi_watchdog = NMI_NONE;
 	}
 
 	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
 
-	disable_8259A_irq(0);
-	irq_desc[0].chip = &lapic_irq_type;
+	lapic_register_intr(0);
 	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
@@ -1749,6 +1783,7 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_VERBOSE," works.\n");
 		goto out;
 	}
+	disable_8259A_irq(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
 	apic_printk(APIC_VERBOSE," failed.\n");
 
@@ -1778,11 +1813,21 @@ static int __init notimercheck(char *s)
 __setup("no_timer_check", notimercheck);
 
 /*
- *
- * IRQs that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- *   Linux doesn't really care, as it's not actually used
- *   for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
  */
 #define PIC_IRQS	(1<<2)
 
@@ -1793,10 +1838,7 @@ void __init setup_IO_APIC(void)
 	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
 	 */
 
-	if (acpi_ioapic)
-		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
-	else
-		io_apic_irqs = ~PIC_IRQS;
+	io_apic_irqs = ~PIC_IRQS;
 
 	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
 
@@ -1841,8 +1883,8 @@ static int ioapic_resume(struct sys_device *dev)
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2242,8 +2284,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == mp_INT &&
-		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+		if (mp_irqs[i].mp_irqtype == mp_INT &&
+		    mp_irqs[i].mp_srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;
@@ -2336,7 +2378,7 @@ void __init ioapic_init_mappings(void)
 	ioapic_res = ioapic_setup_resources();
 	for (i = 0; i < nr_ioapics; i++) {
 		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+			ioapic_phys = mp_ioapics[i].mp_apicaddr;
 		} else {
 			ioapic_phys = (unsigned long)
 				alloc_bootmem_pages(PAGE_SIZE);
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index c0df7b89ca23..9d98cda39ad9 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -8,7 +8,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/cache.h>
-#include <linux/interrupt.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
 
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 147352df28b9..47a6f6f12478 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq)
 #endif
 }
 
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+/* Debugging check for stack overflow: is there less than 1KB free? */
+static int check_stack_overflow(void)
+{
+	long sp;
+
+	__asm__ __volatile__("andl %%esp,%0" :
+			     "=r" (sp) : "0" (THREAD_SIZE - 1));
+
+	return sp < (sizeof(struct thread_info) + STACK_WARN);
+}
+
+static void print_stack_overflow(void)
+{
+	printk(KERN_WARNING "low stack detected by irq handler\n");
+	dump_stack();
+}
+
+#else
+static inline int check_stack_overflow(void) { return 0; }
+static inline void print_stack_overflow(void) { }
+#endif
+
 #ifdef CONFIG_4KSTACKS
 /*
  * per-CPU IRQ handling contexts (thread information and stack)
@@ -59,48 +82,29 @@ union irq_ctx {
 
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-#endif
 
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-unsigned int do_IRQ(struct pt_regs *regs)
-{	
-	struct pt_regs *old_regs;
-	/* high bit used in ret_from_ code */
-	int irq = ~regs->orig_ax;
-	struct irq_desc *desc = irq_desc + irq;
-#ifdef CONFIG_4KSTACKS
-	union irq_ctx *curctx, *irqctx;
-	u32 *isp;
-#endif
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__section__(".bss.page_aligned")));
 
-	if (unlikely((unsigned)irq >= NR_IRQS)) {
-		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-					__func__, irq);
-		BUG();
-	}
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__section__(".bss.page_aligned")));
 
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 1KB free? */
-	{
-		long sp;
-
-		__asm__ __volatile__("andl %%esp,%0" :
-					"=r" (sp) : "0" (THREAD_SIZE - 1));
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-				sp - sizeof(struct thread_info));
-			dump_stack();
-		}
-	}
-#endif
+static void call_on_stack(void *func, void *stack)
+{
+	asm volatile("xchgl	%%ebx,%%esp	\n"
+		     "call	*%%edi		\n"
+		     "movl	%%ebx,%%esp	\n"
+		     : "=b" (stack)
+		     : "0" (stack),
+		       "D"(func)
+		     : "memory", "cc", "edx", "ecx", "eax");
+}
 
-#ifdef CONFIG_4KSTACKS
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
+{
+	union irq_ctx *curctx, *irqctx;
+	u32 *isp, arg1, arg2;
 
 	curctx = (union irq_ctx *) current_thread_info();
 	irqctx = hardirq_ctx[smp_processor_id()];
@@ -111,52 +115,39 @@ unsigned int do_IRQ(struct pt_regs *regs)
 	 * handler) we can't do that and just have to keep using the
 	 * current stack (which is the irq stack already after all)
 	 */
-	if (curctx != irqctx) {
-		int arg1, arg2, bx;
-
-		/* build the stack frame on the IRQ stack */
-		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
-		irqctx->tinfo.task = curctx->tinfo.task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
+	if (unlikely(curctx == irqctx))
+		return 0;
 
-		/*
-		 * Copy the softirq bits in preempt_count so that the
-		 * softirq checks work in the hardirq context.
-		 */
-		irqctx->tinfo.preempt_count =
-			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
-			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
-		asm volatile(
-			"       xchgl  %%ebx,%%esp    \n"
-			"       call   *%%edi         \n"
-			"       movl   %%ebx,%%esp    \n"
-			: "=a" (arg1), "=d" (arg2), "=b" (bx)
-			:  "0" (irq),   "1" (desc),  "2" (isp),
-			   "D" (desc->handle_irq)
-			: "memory", "cc", "ecx"
-		);
-	} else
-#endif
-		desc->handle_irq(irq, desc);
+	/* build the stack frame on the IRQ stack */
+	isp = (u32 *) ((char*)irqctx + sizeof(*irqctx));
+	irqctx->tinfo.task = curctx->tinfo.task;
+	irqctx->tinfo.previous_esp = current_stack_pointer;
 
-	irq_exit();
-	set_irq_regs(old_regs);
+	/*
+	 * Copy the softirq bits in preempt_count so that the
+	 * softirq checks work in the hardirq context.
+	 */
+	irqctx->tinfo.preempt_count =
+		(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+		(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
+	if (unlikely(overflow))
+		call_on_stack(print_stack_overflow, isp);
+
+	asm volatile("xchgl	%%ebx,%%esp	\n"
+		     "call	*%%edi		\n"
+		     "movl	%%ebx,%%esp	\n"
+		     : "=a" (arg1), "=d" (arg2), "=b" (isp)
+		     :  "0" (irq),   "1" (desc),  "2" (isp),
+			"D" (desc->handle_irq)
+		     : "memory", "cc", "ecx");
 	return 1;
 }
 
-#ifdef CONFIG_4KSTACKS
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
  */
-void irq_ctx_init(int cpu)
+void __cpuinit irq_ctx_init(int cpu)
 {
 	union irq_ctx *irqctx;
 
@@ -164,25 +155,25 @@ void irq_ctx_init(int cpu)
 		return;
 
 	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = HARDIRQ_OFFSET;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	hardirq_ctx[cpu] = irqctx;
 
 	irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = 0;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= 0;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
 	softirq_ctx[cpu] = irqctx;
 
-	printk("CPU %u irqstacks, hard=%p soft=%p\n",
-		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+	printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
+	       cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
 }
 
 void irq_ctx_exit(int cpu)
@@ -211,25 +202,56 @@ asmlinkage void do_softirq(void)
 		/* build the stack frame on the softirq stack */
 		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
 
-		asm volatile(
-			"       xchgl   %%ebx,%%esp     \n"
-			"       call    __do_softirq    \n"
-			"       movl    %%ebx,%%esp     \n"
-			: "=b"(isp)
-			: "0"(isp)
-			: "memory", "cc", "edx", "ecx", "eax"
-		);
+		call_on_stack(__do_softirq, isp);
 		/*
 		 * Shouldnt happen, we returned above if in_interrupt():
-	 	 */
+		 */
 		WARN_ON_ONCE(softirq_count());
 	}
 
 	local_irq_restore(flags);
 }
+
+#else
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
 #endif
 
 /*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+unsigned int do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	/* high bit used in ret_from_ code */
+	int overflow, irq = ~regs->orig_ax;
+	struct irq_desc *desc = irq_desc + irq;
+
+	if (unlikely((unsigned)irq >= NR_IRQS)) {
+		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+					__func__, irq);
+		BUG();
+	}
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+
+	overflow = check_stack_overflow();
+
+	if (!execute_on_irq_stack(overflow, desc, irq)) {
+		if (unlikely(overflow))
+			print_stack_overflow();
+		desc->handle_irq(irq, desc);
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
+	return 1;
+}
+
+/*
  * Interrupt statistics:
  */
 
@@ -313,16 +335,20 @@ skip:
 				per_cpu(irq_stat,j).irq_tlb_count);
 		seq_printf(p, "  TLB shootdowns\n");
 #endif
+#ifdef CONFIG_X86_MCE
 		seq_printf(p, "TRM: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).irq_thermal_count);
 		seq_printf(p, "  Thermal event interrupts\n");
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "SPU: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).irq_spurious_count);
 		seq_printf(p, "  Spurious interrupts\n");
+#endif
 		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)
 		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
@@ -331,6 +357,40 @@ skip:
 	return 0;
 }
 
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = nmi_count(cpu);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += per_cpu(irq_stat, cpu).apic_timer_irqs;
+#endif
+#ifdef CONFIG_SMP
+	sum += per_cpu(irq_stat, cpu).irq_resched_count;
+	sum += per_cpu(irq_stat, cpu).irq_call_count;
+	sum += per_cpu(irq_stat, cpu).irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
+	sum += per_cpu(irq_stat, cpu).irq_thermal_count;
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	sum += per_cpu(irq_stat, cpu).irq_spurious_count;
+#endif
+	return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+	u64 sum = atomic_read(&irq_err_count);
+
+#ifdef CONFIG_X86_IO_APIC
+	sum += atomic_read(&irq_mis_count);
+#endif
+	return sum;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 #include <mach_apic.h>
 
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 3aac15466a91..1f78b238d8d2 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -135,6 +135,7 @@ skip:
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count);
 		seq_printf(p, "  TLB shootdowns\n");
 #endif
+#ifdef CONFIG_X86_MCE
 		seq_printf(p, "TRM: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count);
@@ -143,6 +144,7 @@ skip:
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count);
 		seq_printf(p, "  Threshold APIC interrupts\n");
+#endif
 		seq_printf(p, "SPU: ");
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count);
@@ -153,6 +155,32 @@ skip:
 }
 
 /*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = cpu_pda(cpu)->__nmi_count;
+
+	sum += cpu_pda(cpu)->apic_timer_irqs;
+#ifdef CONFIG_SMP
+	sum += cpu_pda(cpu)->irq_resched_count;
+	sum += cpu_pda(cpu)->irq_call_count;
+	sum += cpu_pda(cpu)->irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
+	sum += cpu_pda(cpu)->irq_thermal_count;
+	sum += cpu_pda(cpu)->irq_threshold_count;
+#endif
+	sum += cpu_pda(cpu)->irq_spurious_count;
+	return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+	return atomic_read(&irq_err_count);
+}
+
+/*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
  * handlers).
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
new file mode 100644
index 000000000000..d66914287ee1
--- /dev/null
+++ b/arch/x86/kernel/irqinit_32.c
@@ -0,0 +1,114 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+ 
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+	extern void math_error(void __user *);
+	outb(0,0xF0);
+	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+		return IRQ_NONE;
+	math_error((void __user *)get_irq_regs()->ip);
+	return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+	.handler = math_error_irq,
+	.mask = CPU_MASK_NONE,
+	.name = "fpu",
+};
+
+void __init init_ISA_irqs (void)
+{
+	int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	init_bsp_APIC();
+#endif
+	init_8259A(0);
+
+	/*
+	 * 16 old-style INTA-cycle interrupts:
+	 */
+	for (i = 0; i < 16; i++) {
+		set_irq_chip_and_handler_name(i, &i8259A_chip,
+					      handle_level_irq, "XT");
+	}
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	/* all the set up before the call gates are initialised */
+	pre_intr_init_hook();
+
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (i >= NR_IRQS)
+			break;
+		/* SYSCALL_VECTOR was reserved in trap_init. */
+		if (!test_bit(vector, used_vectors))
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+	/* setup after call gates are initialised (usually add in
+	 * the architecture specific gates)
+	 */
+	intr_init_hook();
+
+	/*
+	 * External FPU? Set up irq13 if so, for
+	 * original braindamaged IBM FERR coupling.
+	 */
+	if (boot_cpu_data.hard_math && !cpu_has_fpu)
+		setup_irq(FPU_IRQ, &fpu_irq);
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
new file mode 100644
index 000000000000..31f49e8f46a7
--- /dev/null
+++ b/arch/x86/kernel/irqinit_64.c
@@ -0,0 +1,217 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/acpi.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+/*
+ * Common place to define all x86 IRQ vectors
+ *
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that save
+ * register context and call do_IRQ(). do_IRQ() then does all the
+ * operations that are needed to keep the AT (or SMP IOAPIC)
+ * interrupt-controller happy.
+ */
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+
+/*
+ *	SMP has a few special interrupts for IPI messages
+ */
+
+#define BUILD_IRQ(nr)				\
+	asmlinkage void IRQ_NAME(nr);		\
+	asm("\n.p2align\n"			\
+	    "IRQ" #nr "_interrupt:\n\t"		\
+	    "push $~(" #nr ") ; "		\
+	    "jmp common_interrupt");
+
+#define BI(x,y) \
+	BUILD_IRQ(x##y)
+
+#define BUILD_16_IRQS(x) \
+	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
+	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
+	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
+	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
+BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
+
+#undef BUILD_16_IRQS
+#undef BI
+
+
+#define IRQ(x,y) \
+	IRQ##x##y##_interrupt
+
+#define IRQLIST_16(x) \
+	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
+	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
+	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
+	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
+
+/* for the irq vectors */
+static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+					  IRQLIST_16(0x2), IRQLIST_16(0x3),
+	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
+	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
+	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
+};
+
+#undef IRQ
+#undef IRQLIST_16
+
+
+
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.mask = CPU_MASK_NONE,
+	.name = "cascade",
+};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... IRQ0_VECTOR - 1] = -1,
+	[IRQ0_VECTOR] = 0,
+	[IRQ1_VECTOR] = 1,
+	[IRQ2_VECTOR] = 2,
+	[IRQ3_VECTOR] = 3,
+	[IRQ4_VECTOR] = 4,
+	[IRQ5_VECTOR] = 5,
+	[IRQ6_VECTOR] = 6,
+	[IRQ7_VECTOR] = 7,
+	[IRQ8_VECTOR] = 8,
+	[IRQ9_VECTOR] = 9,
+	[IRQ10_VECTOR] = 10,
+	[IRQ11_VECTOR] = 11,
+	[IRQ12_VECTOR] = 12,
+	[IRQ13_VECTOR] = 13,
+	[IRQ14_VECTOR] = 14,
+	[IRQ15_VECTOR] = 15,
+	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+static void __init init_ISA_irqs (void)
+{
+	int i;
+
+	init_bsp_APIC();
+	init_8259A(0);
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+
+		if (i < 16) {
+			/*
+			 * 16 old-style INTA-cycle interrupts:
+			 */
+			set_irq_chip_and_handler_name(i, &i8259A_chip,
+						      handle_level_irq, "XT");
+		} else {
+			/*
+			 * 'high' PCI IRQs filled in on demand
+			 */
+			irq_desc[i].chip = &no_irq_chip;
+		}
+	}
+}
+
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	init_ISA_irqs();
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (vector != IA32_SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPIs for invalidation */
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+	/* IPI for generic function call */
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* Low priority IPI to cleanup after moving an irq */
+	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+
+	/* self generated IPI for local APIC timer */
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+}
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 0224c3637c73..21f2bae98c15 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -20,9 +20,9 @@
 #include <asm/mmu_context.h>
 
 #ifdef CONFIG_SMP
-static void flush_ldt(void *null)
+static void flush_ldt(void *current_mm)
 {
-	if (current->active_mm)
+	if (current->active_mm == current_mm)
 		load_LDT(&current->active_mm->context);
 }
 #endif
@@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 		load_LDT(pc);
 		mask = cpumask_of_cpu(smp_processor_id());
 		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
-			smp_call_function(flush_ldt, NULL, 1, 1);
+			smp_call_function(flush_ldt, current->mm, 1, 1);
 		preempt_enable();
 #else
 		load_LDT(pc);
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index d0b234c9fc31..f4960171bc66 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -39,7 +39,7 @@ static void set_idt(void *newidt, __u16 limit)
 	curidt.address = (unsigned long)newidt;
 
 	load_idt(&curidt);
-};
+}
 
 
 static void set_gdt(void *newgdt, __u16 limit)
@@ -51,7 +51,7 @@ static void set_gdt(void *newgdt, __u16 limit)
 	curgdt.address = (unsigned long)newgdt;
 
 	load_gdt(&curgdt);
-};
+}
 
 static void load_segments(void)
 {
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 576a03db4511..7830dc4a8380 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -110,7 +110,7 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
 	pgd_t *level4p;
 	level4p = (pgd_t *)__va(start_pgtable);
- 	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
+	return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
 }
 
 static void set_idt(void *newidt, u16 limit)
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 69729e38b78a..9758fea87c5b 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -5,13 +5,14 @@
  *		      2006	Shaohua Li <shaohua.li@intel.com>
  *
  *	This driver allows to upgrade microcode on Intel processors
- *	belonging to IA-32 family - PentiumPro, Pentium II, 
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
  *	Pentium III, Xeon, Pentium 4, etc.
  *
- *	Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, 
- *	Order Number 245472 or free download from:
- *		
- *	http://developer.intel.com/design/pentium4/manuals/245472.htm
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
  *
  *	For more information, go to http://www.urbanmyth.org/microcode
  *
@@ -58,12 +59,12 @@
  *		nature of implementation.
  *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
  *		Fix the panic when writing zero-length microcode chunk.
- *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, 
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
  *		Jun Nakajima <jun.nakajima@intel.com>
  *		Support for the microcode updates in the new format.
  *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
  *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- *		because we no longer hold a copy of applied microcode 
+ *		because we no longer hold a copy of applied microcode
  *		in kernel memory.
  *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
@@ -320,11 +321,11 @@ static void apply_microcode(int cpu)
 		return;
 
 	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);          
+	spin_lock_irqsave(&microcode_update_lock, flags);
 
 	/* write microcode via MSR 0x79 */
 	wrmsr(MSR_IA32_UCODE_WRITE,
-		(unsigned long) uci->mc->bits, 
+		(unsigned long) uci->mc->bits,
 		(unsigned long) uci->mc->bits >> 16 >> 16);
 	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
 
@@ -341,7 +342,7 @@ static void apply_microcode(int cpu)
 		return;
 	}
 	printk(KERN_INFO "microcode: CPU%d updated from revision "
-	       "0x%x to 0x%x, date = %08x \n", 
+	       "0x%x to 0x%x, date = %08x \n",
 	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
 	uci->rev = val[1];
 }
@@ -534,7 +535,7 @@ static int cpu_request_microcode(int cpu)
 		c->x86, c->x86_model, c->x86_mask);
 	error = request_firmware(&firmware, name, &microcode_pdev->dev);
 	if (error) {
-		pr_debug("microcode: ucode data file %s load failed\n", name);
+		pr_debug("microcode: data file %s load failed\n", name);
 		return error;
 	}
 	buf = firmware->data;
@@ -805,6 +806,9 @@ static int __init microcode_init (void)
 {
 	int error;
 
+	printk(KERN_INFO
+		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
+
 	error = microcode_dev_init();
 	if (error)
 		return error;
@@ -825,9 +829,6 @@ static int __init microcode_init (void)
 	}
 
 	register_hotcpu_notifier(&mc_cpu_notifier);
-
-	printk(KERN_INFO 
-		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
 	return 0;
 }
 
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index edc5fbfe85c0..fdfdc550b366 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -12,6 +12,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/acpi.h>
+#include <asm/mmconfig.h>
 
 #include "../pci/pci.h"
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 404683b94e79..3b25e49380c6 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -25,6 +25,8 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/bios_ebda.h>
+#include <asm/e820.h>
+#include <asm/trampoline.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
@@ -32,28 +34,6 @@
 #include <mach_mpparse.h>
 #endif
 
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
-
-static int mp_current_pci_id;
-
-int pic_mode;
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
 /*
  * Checksum an MP configuration block.
  */
@@ -69,15 +49,73 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 }
 
 #ifdef CONFIG_X86_NUMAQ
+int found_numaq;
 /*
  * Have to match translation table entries to main table entries by counter
  * hence the mpc_record variable .... can't see a less disgusting way of
  * doing this ....
  */
+struct mpc_config_translation {
+	unsigned char mpc_type;
+	unsigned char trans_len;
+	unsigned char trans_type;
+	unsigned char trans_quad;
+	unsigned char trans_global;
+	unsigned char trans_local;
+	unsigned short trans_reserved;
+};
+
 
 static int mpc_record;
 static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
     __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+			struct mpc_config_translation *translation_record)
+{
+	int quad = translation_record->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+static void mpc_oem_pci_bus(struct mpc_config_bus *m,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
 #endif
 
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
@@ -90,7 +128,10 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 		return;
 	}
 #ifdef CONFIG_X86_NUMAQ
-	apicid = mpc_apic_id(m, translation_table[mpc_record]);
+	if (found_numaq)
+		apicid = mpc_apic_id(m, translation_table[mpc_record]);
+	else
+		apicid = m->mpc_apicid;
 #else
 	apicid = m->mpc_apicid;
 #endif
@@ -103,17 +144,18 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 	generic_processor_info(apicid, m->mpc_apicver);
 }
 
+#ifdef CONFIG_X86_IO_APIC
 static void __init MP_bus_info(struct mpc_config_bus *m)
 {
 	char str[7];
-
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
 #ifdef CONFIG_X86_NUMAQ
-	mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+	if (found_numaq)
+		mpc_oem_bus_info(m, str, translation_table[mpc_record]);
 #else
-	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
+	printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
 #endif
 
 #if MAX_MP_BUSSES < 256
@@ -132,11 +174,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
 #ifdef CONFIG_X86_NUMAQ
-		mpc_oem_pci_bus(m, translation_table[mpc_record]);
+		if (found_numaq)
+			mpc_oem_pci_bus(m, translation_table[mpc_record]);
 #endif
 		clear_bit(m->mpc_busid, mp_bus_not_pci);
-		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
-		mp_current_pci_id++;
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
 	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
@@ -147,6 +188,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	} else
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
 }
+#endif
 
 #ifdef CONFIG_X86_IO_APIC
 
@@ -176,18 +218,89 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 	if (bad_ioapic(m->mpc_apicaddr))
 		return;
 
-	mp_ioapics[nr_ioapics] = *m;
+	mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr;
+	mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid;
+	mp_ioapics[nr_ioapics].mp_type = m->mpc_type;
+	mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver;
+	mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags;
 	nr_ioapics++;
 }
 
-static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
+static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	mp_irqs[mp_irq_entries] = *m;
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
 		m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+}
+
+static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
+{
+	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
+		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
+		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
+		mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq);
+}
+
+static void __init assign_to_mp_irq(struct mpc_config_intsrc *m,
+				    struct mp_config_intsrc *mp_irq)
+{
+	mp_irq->mp_dstapic = m->mpc_dstapic;
+	mp_irq->mp_type = m->mpc_type;
+	mp_irq->mp_irqtype = m->mpc_irqtype;
+	mp_irq->mp_irqflag = m->mpc_irqflag;
+	mp_irq->mp_srcbus = m->mpc_srcbus;
+	mp_irq->mp_srcbusirq = m->mpc_srcbusirq;
+	mp_irq->mp_dstirq = m->mpc_dstirq;
+}
+
+static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq,
+					struct mpc_config_intsrc *m)
+{
+	m->mpc_dstapic = mp_irq->mp_dstapic;
+	m->mpc_type = mp_irq->mp_type;
+	m->mpc_irqtype = mp_irq->mp_irqtype;
+	m->mpc_irqflag = mp_irq->mp_irqflag;
+	m->mpc_srcbus = mp_irq->mp_srcbus;
+	m->mpc_srcbusirq = mp_irq->mp_srcbusirq;
+	m->mpc_dstirq = mp_irq->mp_dstirq;
+}
+
+static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq,
+					struct mpc_config_intsrc *m)
+{
+	if (mp_irq->mp_dstapic != m->mpc_dstapic)
+		return 1;
+	if (mp_irq->mp_type != m->mpc_type)
+		return 2;
+	if (mp_irq->mp_irqtype != m->mpc_irqtype)
+		return 3;
+	if (mp_irq->mp_irqflag != m->mpc_irqflag)
+		return 4;
+	if (mp_irq->mp_srcbus != m->mpc_srcbus)
+		return 5;
+	if (mp_irq->mp_srcbusirq != m->mpc_srcbusirq)
+		return 6;
+	if (mp_irq->mp_dstirq != m->mpc_dstirq)
+		return 7;
+
+	return 0;
+}
+
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
+{
+	int i;
+
+	print_MP_intsrc_info(m);
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m))
+			return;
+	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
 	if (++mp_irq_entries == MAX_IRQ_SOURCES)
 		panic("Max # of irq sources exceeded!!\n");
 }
@@ -196,7 +309,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
-	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+	printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
@@ -266,11 +379,14 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
 	}
 }
 
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
 				 char *productid)
 {
 	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  May not be a NUMA-Q system!\n");
+		printk("Warning!  Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+
 	if (mpc->mpc_oemptr)
 		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
 				 mpc->mpc_oemsize);
@@ -281,12 +397,9 @@ static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
  * Read/parse the MPC
  */
 
-static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+static int __init smp_check_mpc(struct mp_config_table *mpc, char *oem,
+				char *str)
 {
-	char str[16];
-	char oem[10];
-	int count = sizeof(*mpc);
-	unsigned char *mpt = ((unsigned char *)mpc) + count;
 
 	if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
 		printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
@@ -309,19 +422,42 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	}
 	memcpy(oem, mpc->mpc_oem, 8);
 	oem[8] = 0;
-	printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
+	printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem);
 
 	memcpy(str, mpc->mpc_productid, 12);
 	str[12] = 0;
-	printk("Product ID: %s ", str);
 
-#ifdef CONFIG_X86_32
-	mps_oem_check(mpc, oem, str);
-#endif
-	printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
+	printk(KERN_INFO "MPTABLE: Product ID: %s\n", str);
 
 	printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
 
+	return 1;
+}
+
+static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+{
+	char str[16];
+	char oem[10];
+
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * need to make sure summit and es7000's mps_oem_check is safe to be
+	 * called early via genericarch 's mps_oem_check
+	 */
+	if (early) {
+#ifdef CONFIG_X86_NUMAQ
+		numaq_mps_oem_check(mpc, oem, str);
+#endif
+	} else
+		mps_oem_check(mpc, oem, str);
+#endif
+
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;
@@ -352,7 +488,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 			{
 				struct mpc_config_bus *m =
 				    (struct mpc_config_bus *)mpt;
+#ifdef CONFIG_X86_IO_APIC
 				MP_bus_info(m);
+#endif
 				mpt += sizeof(*m);
 				count += sizeof(*m);
 				break;
@@ -402,6 +540,11 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 		++mpc_record;
 #endif
 	}
+
+#ifdef CONFIG_X86_GENERICARCH
+       generic_bigsmp_probe();
+#endif
+
 	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
@@ -427,7 +570,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	intsrc.mpc_type = MP_INTSRC;
 	intsrc.mpc_irqflag = 0;	/* conforming */
 	intsrc.mpc_srcbus = 0;
-	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+	intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid;
 
 	intsrc.mpc_irqtype = mp_INT;
 
@@ -488,40 +631,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	MP_intsrc_info(&intsrc);
 }
 
-#endif
 
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+static void construct_ioapic_table(int mpc_default_type)
 {
-	struct mpc_config_processor processor;
-	struct mpc_config_bus bus;
-#ifdef CONFIG_X86_IO_APIC
 	struct mpc_config_ioapic ioapic;
-#endif
-	struct mpc_config_lintsrc lintsrc;
-	int linttypes[2] = { mp_ExtINT, mp_NMI };
-	int i;
-
-	/*
-	 * local APIC has default address
-	 */
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/*
-	 * 2 CPUs, numbered 0 & 1.
-	 */
-	processor.mpc_type = MP_PROCESSOR;
-	/* Either an integrated APIC or a discrete 82489DX. */
-	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	processor.mpc_cpuflag = CPU_ENABLED;
-	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
-	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-	for (i = 0; i < 2; i++) {
-		processor.mpc_apicid = i;
-		MP_processor_info(&processor);
-	}
+	struct mpc_config_bus bus;
 
 	bus.mpc_type = MP_BUS;
 	bus.mpc_busid = 0;
@@ -550,7 +664,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 		MP_bus_info(&bus);
 	}
 
-#ifdef CONFIG_X86_IO_APIC
 	ioapic.mpc_type = MP_IOAPIC;
 	ioapic.mpc_apicid = 2;
 	ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
@@ -562,7 +675,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
 	 */
 	construct_default_ioirq_mptable(mpc_default_type);
+}
+#else
+static inline void construct_ioapic_table(int mpc_default_type) { }
 #endif
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+	struct mpc_config_processor processor;
+	struct mpc_config_lintsrc lintsrc;
+	int linttypes[2] = { mp_ExtINT, mp_NMI };
+	int i;
+
+	/*
+	 * local APIC has default address
+	 */
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/*
+	 * 2 CPUs, numbered 0 & 1.
+	 */
+	processor.mpc_type = MP_PROCESSOR;
+	/* Either an integrated APIC or a discrete 82489DX. */
+	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+	processor.mpc_cpuflag = CPU_ENABLED;
+	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+	processor.mpc_reserved[0] = 0;
+	processor.mpc_reserved[1] = 0;
+	for (i = 0; i < 2; i++) {
+		processor.mpc_apicid = i;
+		MP_processor_info(&processor);
+	}
+
+	construct_ioapic_table(mpc_default_type);
+
 	lintsrc.mpc_type = MP_LINTSRC;
 	lintsrc.mpc_irqflag = 0;	/* conforming */
 	lintsrc.mpc_srcbusid = 0;
@@ -578,12 +726,22 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 static struct intel_mp_floating *mpf_found;
 
 /*
+ * Machine specific quirk for finding the SMP config before other setup
+ * activities destroy the table:
+ */
+int (*mach_get_smp_config_quirk)(unsigned int early);
+
+/*
  * Scan the memory blocks for an SMP configuration block.
  */
-static void __init __get_smp_config(unsigned early)
+static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
+	if (mach_get_smp_config_quirk) {
+		if (mach_get_smp_config_quirk(early))
+			return;
+	}
 	if (acpi_lapic && early)
 		return;
 	/*
@@ -600,7 +758,7 @@ static void __init __get_smp_config(unsigned early)
 
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
 	       mpf->mpf_specification);
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 	if (mpf->mpf_feature2 & (1 << 7)) {
 		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
 		pic_mode = 1;
@@ -632,7 +790,9 @@ static void __init __get_smp_config(unsigned early)
 		 * override the defaults.
 		 */
 		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
+#ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 0;
+#endif
 			printk(KERN_ERR
 			       "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. "
@@ -689,7 +849,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
+	printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
@@ -699,15 +859,21 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 		    !mpf_checksum((unsigned char *)bp, 16) &&
 		    ((mpf->mpf_specification == 1)
 		     || (mpf->mpf_specification == 4))) {
-
+#ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 1;
+#endif
 			mpf_found = mpf;
-#ifdef CONFIG_X86_32
+
 			printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
 			       mpf, virt_to_phys(mpf));
-			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
+
+			if (!reserve)
+				return 1;
+			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE,
 					BOOTMEM_DEFAULT);
 			if (mpf->mpf_physptr) {
+				unsigned long size = PAGE_SIZE;
+#ifdef CONFIG_X86_32
 				/*
 				 * We cannot access to MPC table to compute
 				 * table size yet, as only few megabytes from
@@ -717,24 +883,15 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
 				 * in reserve_bootmem.
 				 */
-				unsigned long size = PAGE_SIZE;
 				unsigned long end = max_low_pfn * PAGE_SIZE;
 				if (mpf->mpf_physptr + size > end)
 					size = end - mpf->mpf_physptr;
-				reserve_bootmem(mpf->mpf_physptr, size,
+#endif
+				reserve_bootmem_generic(mpf->mpf_physptr, size,
 						BOOTMEM_DEFAULT);
 			}
 
-#else
-			if (!reserve)
-				return 1;
-
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr,
-							PAGE_SIZE);
-#endif
-		return 1;
+			return 1;
 		}
 		bp += 4;
 		length -= 16;
@@ -742,10 +899,16 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-static void __init __find_smp_config(unsigned reserve)
+int (*mach_find_smp_config_quirk)(unsigned int reserve);
+
+static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
+	if (mach_find_smp_config_quirk) {
+		if (mach_find_smp_config_quirk(reserve))
+			return;
+	}
 	/*
 	 * FIXME: Linux assumes you have 640K of base ram..
 	 * this continues the error...
@@ -790,298 +953,294 @@ void __init find_smp_config(void)
 	__find_smp_config(1);
 }
 
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
+#ifdef CONFIG_X86_IO_APIC
+static u8 __initdata irq_used[MAX_IRQ_SOURCES];
 
-/*
- * Keep this outside and initialized to 0, for !CONFIG_ACPI builds:
- */
-int es7000_plat;
+static int  __init get_MP_intsrc_index(struct mpc_config_intsrc *m)
+{
+	int i;
 
-#ifdef CONFIG_ACPI
+	if (m->mpc_irqtype != mp_INT)
+		return 0;
 
-#ifdef	CONFIG_X86_IO_APIC
+	if (m->mpc_irqflag != 0x0f)
+		return 0;
 
-#define MP_ISA_BUS		0
+	/* not legacy */
 
-extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (mp_irqs[i].mp_irqtype != mp_INT)
+			continue;
 
-static int mp_find_ioapic(int gsi)
-{
-	int i = 0;
+		if (mp_irqs[i].mp_irqflag != 0x0f)
+			continue;
 
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
+		if (mp_irqs[i].mp_srcbus != m->mpc_srcbus)
+			continue;
+		if (mp_irqs[i].mp_srcbusirq != m->mpc_srcbusirq)
+			continue;
+		if (irq_used[i]) {
+			/* already claimed */
+			return -2;
+		}
+		irq_used[i] = 1;
+		return i;
 	}
 
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	/* not found */
 	return -1;
 }
 
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mpc_apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
+#define SPARE_SLOT_NUM 20
+
+static struct mpc_config_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
 #endif
-}
 
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+static int  __init replace_intsrc_all(struct mp_config_table *mpc,
+					unsigned long mpc_new_phys,
+					unsigned long mpc_new_length)
 {
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
+#ifdef CONFIG_X86_IO_APIC
+	int i;
+	int nr_m_spare = 0;
+#endif
 
-	idx = nr_ioapics;
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
 
-	mp_ioapics[idx].mpc_type = MP_IOAPIC;
-	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mpc_apicaddr = address;
+	printk(KERN_INFO "mpc_length %x\n", mpc->mpc_length);
+	while (count < mpc->mpc_length) {
+		switch (*mpt) {
+		case MP_PROCESSOR:
+			{
+				struct mpc_config_processor *m =
+				    (struct mpc_config_processor *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		case MP_BUS:
+			{
+				struct mpc_config_bus *m =
+				    (struct mpc_config_bus *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		case MP_IOAPIC:
+			{
+				mpt += sizeof(struct mpc_config_ioapic);
+				count += sizeof(struct mpc_config_ioapic);
+				break;
+			}
+		case MP_INTSRC:
+			{
+#ifdef CONFIG_X86_IO_APIC
+				struct mpc_config_intsrc *m =
+				    (struct mpc_config_intsrc *)mpt;
 
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
-	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].mpc_apicver = 0;
+				printk(KERN_INFO "OLD ");
+				print_MP_intsrc_info(m);
+				i = get_MP_intsrc_index(m);
+				if (i > 0) {
+					assign_to_mpc_intsrc(&mp_irqs[i], m);
+					printk(KERN_INFO "NEW ");
+					print_mp_irq_info(&mp_irqs[i]);
+				} else if (!i) {
+					/* legacy, do nothing */
+				} else if (nr_m_spare < SPARE_SLOT_NUM) {
+					/*
+					 * not found (-1), or duplicated (-2)
+					 * are invalid entries,
+					 * we need to use the slot  later
+					 */
+					m_spare[nr_m_spare] = m;
+					nr_m_spare++;
+				}
 #endif
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
-	       mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
+				mpt += sizeof(struct mpc_config_intsrc);
+				count += sizeof(struct mpc_config_intsrc);
+				break;
+			}
+		case MP_LINTSRC:
+			{
+				struct mpc_config_lintsrc *m =
+				    (struct mpc_config_lintsrc *)mpt;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+		default:
+			/* wrong mptable */
+			printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n");
+			printk(KERN_ERR "type %x\n", *mpt);
+			print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
+					1, mpc, mpc->mpc_length, 1);
+			goto out;
+		}
+	}
 
-void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
-	struct mpc_config_intsrc intsrc;
-	int ioapic = -1;
-	int pin = -1;
+#ifdef CONFIG_X86_IO_APIC
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (irq_used[i])
+			continue;
 
-	/*
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+		if (mp_irqs[i].mp_irqtype != mp_INT)
+			continue;
 
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
+		if (mp_irqs[i].mp_irqflag != 0x0f)
+			continue;
 
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqtype = mp_INT;
-	intsrc.mpc_irqflag = (trigger << 2) | polarity;
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;	/* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	/* APIC ID */
-	intsrc.mpc_dstirq = pin;	/* INTIN# */
+		if (nr_m_spare > 0) {
+			printk(KERN_INFO "*NEW* found ");
+			nr_m_spare--;
+			assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
+			m_spare[nr_m_spare] = NULL;
+		} else {
+			struct mpc_config_intsrc *m =
+			    (struct mpc_config_intsrc *)mpt;
+			count += sizeof(struct mpc_config_intsrc);
+			if (!mpc_new_phys) {
+				printk(KERN_INFO "No spare slots, try to append...take your risk, new mpc_length %x\n", count);
+			} else {
+				if (count <= mpc_new_length)
+					printk(KERN_INFO "No spare slots, try to append..., new mpc_length %x\n", count);
+				else {
+					printk(KERN_ERR "mpc_new_length %lx is too small\n", mpc_new_length);
+					goto out;
+				}
+			}
+			assign_to_mpc_intsrc(&mp_irqs[i], m);
+			mpc->mpc_length = count;
+			mpt += sizeof(struct mpc_config_intsrc);
+		}
+		print_mp_irq_info(&mp_irqs[i]);
+	}
+#endif
+out:
+	/* update checksum */
+	mpc->mpc_checksum = 0;
+	mpc->mpc_checksum -= mpf_checksum((unsigned char *)mpc,
+					   mpc->mpc_length);
 
-	MP_intsrc_info(&intsrc);
+	return 0;
 }
 
-void __init mp_config_acpi_legacy_irqs(void)
-{
-	struct mpc_config_intsrc intsrc;
-	int i = 0;
-	int ioapic = -1;
+static int __initdata enable_update_mptable;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-	/*
-	 * Fabricate the legacy ISA bus (bus #31).
-	 */
-	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
-#endif
-	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+static int __init update_mptable_setup(char *str)
+{
+	enable_update_mptable = 1;
+	return 0;
+}
+early_param("update_mptable", update_mptable_setup);
 
-	/*
-	 * Older generations of ES7000 have no legacy identity mappings
-	 */
-	if (es7000_plat == 1)
-		return;
+static unsigned long __initdata mpc_new_phys;
+static unsigned long mpc_new_length __initdata = 4096;
 
-	/*
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
+/* alloc_mptable or alloc_mptable=4k */
+static int __initdata alloc_mptable;
+static int __init parse_alloc_mptable_opt(char *p)
+{
+	enable_update_mptable = 1;
+	alloc_mptable = 1;
+	if (!p)
+		return 0;
+	mpc_new_length = memparse(p, &p);
+	return 0;
+}
+early_param("alloc_mptable", parse_alloc_mptable_opt);
 
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;	/* Conforming */
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-#ifdef CONFIG_X86_IO_APIC
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+void __init early_reserve_e820_mpc_new(void)
+{
+	if (enable_update_mptable && alloc_mptable) {
+		u64 startt = 0;
+#ifdef CONFIG_X86_TRAMPOLINE
+		startt = TRAMPOLINE_BASE;
 #endif
-	/*
-	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overridden by (MADT) interrupt source override entries.
-	 */
-	for (i = 0; i < 16; i++) {
-		int idx;
-
-		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mpc_config_intsrc *irq = mp_irqs + idx;
-
-			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS
-			    && irq->mpc_srcbusirq == i)
-				break;
-
-			/* Do we already have a mapping for this IOAPIC pin */
-			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-			    (irq->mpc_dstirq == i))
-				break;
-		}
-
-		if (idx != mp_irq_entries) {
-			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;	/* IRQ already used */
-		}
-
-		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;	/* Identity mapped */
-		intsrc.mpc_dstirq = i;
-
-		MP_intsrc_info(&intsrc);
+		mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
 	}
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int __init update_mp_table(void)
 {
-	int ioapic;
-	int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
+	char str[16];
+	char oem[10];
+	struct intel_mp_floating *mpf;
+	struct mp_config_table *mpc;
+	struct mp_config_table *mpc_new;
+
+	if (!enable_update_mptable)
+		return 0;
+
+	mpf = mpf_found;
+	if (!mpf)
+		return 0;
 
-	static int pci_irq = IRQ_COMPRESSION_START;
 	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
+	 * Now see if we need to go further.
 	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-#endif
+	if (mpf->mpf_feature1 != 0)
+		return 0;
 
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_gbl_FADT.sci_interrupt == gsi)
-		return gsi;
+	if (!mpf->mpf_physptr)
+		return 0;
 
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0) {
-		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return gsi;
-	}
+	mpc = phys_to_virt(mpf->mpf_physptr);
 
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
 
-#ifdef CONFIG_X86_32
-	if (ioapic_renumber_irq)
-		gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
+	printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf));
+	printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr);
 
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
-		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
-		       ioapic_pin);
-		return gsi;
+	if (mpc_new_phys && mpc->mpc_length > mpc_new_length) {
+		mpc_new_phys = 0;
+		printk(KERN_INFO "mpc_new_length is %ld, please use alloc_mptable=8k\n",
+			 mpc_new_length);
 	}
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
+
+	if (!mpc_new_phys) {
+		unsigned char old, new;
+		/* check if we can change the postion */
+		mpc->mpc_checksum = 0;
+		old = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+		mpc->mpc_checksum = 0xff;
+		new = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+		if (old == new) {
+			printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n");
+			return 0;
+		}
+		printk(KERN_INFO "use in-positon replacing\n");
+	} else {
+		mpf->mpf_physptr = mpc_new_phys;
+		mpc_new = phys_to_virt(mpc_new_phys);
+		memcpy(mpc_new, mpc, mpc->mpc_length);
+		mpc = mpc_new;
+		/* check if we can modify that */
+		if (mpc_new_phys - mpf->mpf_physptr) {
+			struct intel_mp_floating *mpf_new;
+			/* steal 16 bytes from [0, 1k) */
+			printk(KERN_INFO "mpf new: %x\n", 0x400 - 16);
+			mpf_new = phys_to_virt(0x400 - 16);
+			memcpy(mpf_new, mpf, 16);
+			mpf = mpf_new;
+			mpf->mpf_physptr = mpc_new_phys;
+		}
+		mpf->mpf_checksum = 0;
+		mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16);
+		printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr);
 	}
 
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
 	/*
-	 * For GSI >= 64, use IRQ compression
+	 * only replace the one with mp_INT and
+	 *	 MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
+	 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
+	 * may need pci=routeirq for all coverage
 	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
+	replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
+
+	return 0;
 }
 
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
+late_initcall(update_mp_table);
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi.c
index 84160f74eeb0..716b89284be0 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi.c
@@ -11,10 +11,13 @@
  *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
  */
 
+#include <asm/apic.h>
+
+#include <linux/nmi.h>
+#include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/nmi.h>
 #include <linux/sysdev.h>
 #include <linux/sysctl.h>
 #include <linux/percpu.h>
@@ -22,12 +25,18 @@
 #include <linux/cpumask.h>
 #include <linux/kernel_stat.h>
 #include <linux/kdebug.h>
-#include <linux/slab.h>
+#include <linux/smp.h>
 
+#include <asm/i8259.h>
+#include <asm/io_apic.h>
 #include <asm/smp.h>
 #include <asm/nmi.h>
+#include <asm/proto.h>
+#include <asm/timer.h>
 
-#include "mach_traps.h"
+#include <asm/mce.h>
+
+#include <mach_traps.h>
 
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
@@ -41,28 +50,65 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE;
  *  0: the lapic NMI watchdog is disabled, but can be enabled
  */
 atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
 
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
+unsigned int nmi_watchdog = NMI_NONE;
+EXPORT_SYMBOL(nmi_watchdog);
 
+static int panic_on_timeout;
+
+static unsigned int nmi_hz = HZ;
 static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
 
-static int endflag __initdata = 0;
+static inline unsigned int get_nmi_count(int cpu)
+{
+#ifdef CONFIG_X86_64
+	return cpu_pda(cpu)->__nmi_count;
+#else
+	return nmi_count(cpu);
+#endif
+}
+
+static inline int mce_in_progress(void)
+{
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+	return atomic_read(&mce_entry) > 0;
+#endif
+	return 0;
+}
+
+/*
+ * Take the local apic timer and PIT/HPET into account. We don't
+ * know which one is active, when we have highres/dyntick on
+ */
+static inline unsigned int get_timer_irqs(int cpu)
+{
+#ifdef CONFIG_X86_64
+	return read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
+#else
+	return per_cpu(irq_stat, cpu).apic_timer_irqs +
+		per_cpu(irq_stat, cpu).irq0_irqs;
+#endif
+}
 
 #ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+/*
+ * The performance counters used by NMI_LOCAL_APIC don't trigger when
  * the CPU is idle. To make sure the NMI watchdog really ticks on all
  * CPUs during the test make them busy.
  */
 static __init void nmi_cpu_busy(void *data)
 {
 	local_irq_enable_in_hardirq();
-	/* Intentionally don't use cpu_relax here. This is
-	   to make sure that the performance counter really ticks,
-	   even if there is a simulator or similar that catches the
-	   pause instruction. On a real HT machine this is fine because
-	   all other CPUs are busy with "useless" delay loops and don't
-	   care if they get somewhat less cycles. */
+	/*
+	 * Intentionally don't use cpu_relax here. This is
+	 * to make sure that the performance counter really ticks,
+	 * even if there is a simulator or similar that catches the
+	 * pause instruction. On a real HT machine this is fine because
+	 * all other CPUs are busy with "useless" delay loops and don't
+	 * care if they get somewhat less cycles.
+	 */
 	while (endflag == 0)
 		mb();
 }
@@ -73,15 +119,12 @@ int __init check_nmi_watchdog(void)
 	unsigned int *prev_nmi_count;
 	int cpu;
 
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
-		return 0;
-
-	if (!atomic_read(&nmi_active))
+	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
 		return 0;
 
-	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
 	if (!prev_nmi_count)
-		return -1;
+		goto error;
 
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
@@ -91,25 +134,19 @@ int __init check_nmi_watchdog(void)
 #endif
 
 	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = nmi_count(cpu);
+		prev_nmi_count[cpu] = get_nmi_count(cpu);
 	local_irq_enable();
-	mdelay((20*1000)/nmi_hz); // wait 20 ticks
+	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
 
-	for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
-		/* Check cpu_callin_map here because that is set
-		   after the timer is started. */
-		if (!cpu_isset(cpu, cpu_callin_map))
-			continue;
-#endif
+	for_each_online_cpu(cpu) {
 		if (!per_cpu(wd_enabled, cpu))
 			continue;
-		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
 			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
 				"appears to be stuck (%d->%d)!\n",
 				cpu,
 				prev_nmi_count[cpu],
-				nmi_count(cpu));
+				get_nmi_count(cpu));
 			per_cpu(wd_enabled, cpu) = 0;
 			atomic_dec(&nmi_active);
 		}
@@ -118,37 +155,53 @@ int __init check_nmi_watchdog(void)
 	if (!atomic_read(&nmi_active)) {
 		kfree(prev_nmi_count);
 		atomic_set(&nmi_active, -1);
-		return -1;
+		goto error;
 	}
 	printk("OK.\n");
 
-	/* now that we know it works we can reduce NMI frequency to
-	   something more reasonable; makes a difference in some configs */
+	/*
+	 * now that we know it works we can reduce NMI frequency to
+	 * something more reasonable; makes a difference in some configs
+	 */
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = lapic_adjust_nmi_hz(1);
 
 	kfree(prev_nmi_count);
 	return 0;
+error:
+	if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259)
+		disable_8259A_irq(0);
+#ifdef CONFIG_X86_32
+	timer_ack = 0;
+#endif
+	return -1;
 }
 
 static int __init setup_nmi_watchdog(char *str)
 {
-	int nmi;
+	unsigned int nmi;
+
+	if (!strncmp(str, "panic", 5)) {
+		panic_on_timeout = 1;
+		str = strchr(str, ',');
+		if (!str)
+			return 1;
+		++str;
+	}
 
 	get_option(&str, &nmi);
 
-	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
+	if (nmi >= NMI_INVALID)
 		return 0;
 
 	nmi_watchdog = nmi;
 	return 1;
 }
-
 __setup("nmi_watchdog=", setup_nmi_watchdog);
 
-
-/* Suspend/resume support */
-
+/*
+ * Suspend/resume support
+ */
 #ifdef CONFIG_PM
 
 static int nmi_pm_active; /* nmi_active before suspend */
@@ -172,7 +225,6 @@ static int lapic_nmi_resume(struct sys_device *dev)
 	return 0;
 }
 
-
 static struct sysdev_class nmi_sysclass = {
 	.name		= "lapic_nmi",
 	.resume		= lapic_nmi_resume,
@@ -188,7 +240,8 @@ static int __init init_lapic_nmi_sysfs(void)
 {
 	int error;
 
-	/* should really be a BUG_ON but b/c this is an
+	/*
+	 * should really be a BUG_ON but b/c this is an
 	 * init call, it just doesn't work.  -dcz
 	 */
 	if (nmi_watchdog != NMI_LOCAL_APIC)
@@ -202,6 +255,7 @@ static int __init init_lapic_nmi_sysfs(void)
 		error = sysdev_register(&device_lapic_nmi);
 	return error;
 }
+
 /* must come after the local APIC's device_initcall() */
 late_initcall(init_lapic_nmi_sysfs);
 
@@ -223,7 +277,7 @@ void acpi_nmi_enable(void)
 
 static void __acpi_nmi_disable(void *__unused)
 {
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+	apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
 }
 
 /*
@@ -242,12 +296,13 @@ void setup_apic_nmi_watchdog(void *unused)
 
 	/* cheap hack to support suspend/resume */
 	/* if cpu0 is not active neither should the other cpus */
-	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
+	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
 		return;
 
 	switch (nmi_watchdog) {
 	case NMI_LOCAL_APIC:
-		__get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */
+		 /* enable it before to avoid race with handler */
+		__get_cpu_var(wd_enabled) = 1;
 		if (lapic_watchdog_init(nmi_hz) < 0) {
 			__get_cpu_var(wd_enabled) = 0;
 			return;
@@ -262,9 +317,8 @@ void setup_apic_nmi_watchdog(void *unused)
 void stop_apic_nmi_watchdog(void *unused)
 {
 	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
+	if (!nmi_watchdog_active())
+		return;
 	if (__get_cpu_var(wd_enabled) == 0)
 		return;
 	if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -284,26 +338,26 @@ void stop_apic_nmi_watchdog(void *unused)
  * since NMIs don't listen to _any_ locks, we have to be extremely
  * careful not to rely on unsafe variables. The printk might lock
  * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- *  here too!]
+ * [when there will be more tty-related locks, break them up here too!]
  */
 
-static unsigned int
-	last_irq_sums [NR_CPUS],
-	alert_counter [NR_CPUS];
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog(void)
 {
-	if (nmi_watchdog > 0) {
+	if (nmi_watchdog_active()) {
 		unsigned cpu;
 
 		/*
-		 * Just reset the alert counters, (other CPUs might be
-		 * spinning on locks we hold):
+		 * Tell other CPUs to reset their alert counters. We cannot
+		 * do it ourselves because the alert count increase is not
+		 * atomic.
 		 */
 		for_each_present_cpu(cpu) {
-			if (alert_counter[cpu])
-				alert_counter[cpu] = 0;
+			if (per_cpu(nmi_touch, cpu) != 1)
+				per_cpu(nmi_touch, cpu) = 1;
 		}
 	}
 
@@ -314,12 +368,9 @@ void touch_nmi_watchdog(void)
 }
 EXPORT_SYMBOL(touch_nmi_watchdog);
 
-extern void die_nmi(struct pt_regs *, const char *msg);
-
 notrace __kprobes int
 nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 {
-
 	/*
 	 * Since current_thread_info()-> is always on the stack, and we
 	 * always switch the stack NMI-atomically, it's safe to use
@@ -337,39 +388,45 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		touched = 1;
 	}
 
+	sum = get_timer_irqs(cpu);
+
+	if (__get_cpu_var(nmi_touch)) {
+		__get_cpu_var(nmi_touch) = 0;
+		touched = 1;
+	}
+
 	if (cpu_isset(cpu, backtrace_mask)) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
-		printk("NMI backtrace for cpu %d\n", cpu);
+		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
 		dump_stack();
 		spin_unlock(&lock);
 		cpu_clear(cpu, backtrace_mask);
 	}
 
-	/*
-	 * Take the local apic timer and PIT/HPET into account. We don't
-	 * know which one is active, when we have highres/dyntick on
-	 */
-	sum = per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
+	/* Could check oops_in_progress here too, but it's safer not to */
+	if (mce_in_progress())
+		touched = 1;
 
 	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && last_irq_sums[cpu] == sum) {
+	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
 		/*
 		 * Ayiee, looks like this CPU is stuck ...
 		 * wait a few IRQs (5 seconds) before doing the oops ...
 		 */
-		alert_counter[cpu]++;
-		if (alert_counter[cpu] == 5*nmi_hz)
+		local_inc(&__get_cpu_var(alert_counter));
+		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
 			/*
 			 * die_nmi will return ONLY if NOTIFY_STOP happens..
 			 */
-			die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP");
+			die_nmi("BUG: NMI Watchdog detected LOCKUP",
+				regs, panic_on_timeout);
 	} else {
-		last_irq_sums[cpu] = sum;
-		alert_counter[cpu] = 0;
+		__get_cpu_var(last_irq_sum) = sum;
+		local_set(&__get_cpu_var(alert_counter), 0);
 	}
+
 	/* see if the nmi watchdog went off */
 	if (!__get_cpu_var(wd_enabled))
 		return rc;
@@ -378,7 +435,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		rc |= lapic_wd_event(nmi_hz);
 		break;
 	case NMI_IO_APIC:
-		/* don't know how to accurately check for this.
+		/*
+		 * don't know how to accurately check for this.
 		 * just assume it was a watchdog timer interrupt
 		 * This matches the old behaviour.
 		 */
@@ -396,7 +454,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 	char buf[64];
 
 	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(regs, buf);
+	die_nmi(buf, regs, 1); /* Always panic here */
 	return 0;
 }
 
@@ -414,32 +472,26 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
 	if (!!old_state == !!nmi_watchdog_enabled)
 		return 0;
 
-	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
-		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
+	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
+		printk(KERN_WARNING
+			"NMI watchdog is permanently disabled\n");
 		return -EIO;
 	}
 
-	if (nmi_watchdog == NMI_DEFAULT) {
-		if (lapic_watchdog_ok())
-			nmi_watchdog = NMI_LOCAL_APIC;
-		else
-			nmi_watchdog = NMI_IO_APIC;
-	}
-
 	if (nmi_watchdog == NMI_LOCAL_APIC) {
 		if (nmi_watchdog_enabled)
 			enable_lapic_nmi_watchdog();
 		else
 			disable_lapic_nmi_watchdog();
 	} else {
-		printk( KERN_WARNING
+		printk(KERN_WARNING
 			"NMI watchdog doesn't know what hardware to touch\n");
 		return -EIO;
 	}
 	return 0;
 }
 
-#endif
+#endif /* CONFIG_SYSCTL */
 
 int do_nmi_callback(struct pt_regs *regs, int cpu)
 {
@@ -462,6 +514,3 @@ void __trigger_all_cpu_backtrace(void)
 		mdelay(1);
 	}
 }
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
deleted file mode 100644
index 5a29ded994fa..000000000000
--- a/arch/x86/kernel/nmi_64.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kdebug.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/proto.h>
-#include <asm/mce.h>
-
-#include <mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-int panic_on_unrecovered_nmi;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-static int panic_on_timeout;
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-/* Run after command line and cpu_init init, but before all other checks */
-void nmi_watchdog_default(void)
-{
-	if (nmi_watchdog != NMI_DEFAULT)
-		return;
-	nmi_watchdog = NMI_NONE;
-}
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/* Intentionally don't use cpu_relax here. This is
-	   to make sure that the performance counter really ticks,
-	   even if there is a simulator or similar that catches the
-	   pause instruction. On a real HT machine this is fine because
-	   all other CPUs are busy with "useless" delay loops and don't
-	   care if they get somewhat less cycles. */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-int __init check_nmi_watchdog(void)
-{
-	int *prev_nmi_count;
-	int cpu;
-
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
-		return 0;
-
-	if (!atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		return -1;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count;
-	local_irq_enable();
-	mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) {
-			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-			       "appears to be stuck (%d->%d)!\n",
-				cpu,
-				prev_nmi_count[cpu],
-				cpu_pda(cpu)->__nmi_count);
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		return -1;
-	}
-	printk("OK.\n");
-
-	/* now that we know it works we can reduce NMI frequency to
-	   something more reasonable; makes a difference in some configs */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	int nmi;
-
-	if (!strncmp(str,"panic",5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	get_option(&str, &nmi);
-
-	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
-		return 0;
-
-	nmi_watchdog = nmi;
-	return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/* should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(local_t, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog > 0) {
-		unsigned cpu;
-
-		/*
- 		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-	int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	/* check for other users first */
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
-			== NOTIFY_STOP) {
-		rc = 1;
-		touched = 1;
-	}
-
-	sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	if (cpu_isset(cpu, backtrace_mask)) {
-		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
-
-		spin_lock(&lock);
-		printk("NMI backtrace for cpu %d\n", cpu);
-		dump_stack();
-		spin_unlock(&lock);
-		cpu_clear(cpu, backtrace_mask);
-	}
-
-#ifdef CONFIG_X86_MCE
-	/* Could check oops_in_progress here too, but it's safer
-	   not too */
-	if (atomic_read(&mce_entry) > 0)
-		touched = 1;
-#endif
-	/* if the apic timer isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
-			die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
-				panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		local_set(&__get_cpu_var(alert_counter), 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/* don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-static unsigned ignore_nmis;
-
-asmlinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_enter();
-	add_pda(__nmi_count,1);
-	if (!ignore_nmis)
-		default_do_nmi(regs);
-	nmi_exit();
-}
-
-void stop_nmi(void)
-{
-	acpi_nmi_disable();
-	ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
-	ignore_nmis--;
-	acpi_nmi_enable();
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1);	/* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, file, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
-		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	/* if nmi_watchdog is not set yet, then set it */
-	nmi_watchdog_default();
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else {
-		printk( KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	backtrace_mask = cpu_online_map;
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpus_empty(backtrace_mask))
-			break;
-		mdelay(1);
-	}
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index e65281b1634b..5b20a5e7ac28 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -31,6 +31,8 @@
 #include <asm/numaq.h>
 #include <asm/topology.h>
 #include <asm/processor.h>
+#include <asm/mpspec.h>
+#include <asm/e820.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -58,6 +60,8 @@ static void __init smp_dump_qct(void)
 			node_end_pfn[node] = MB_TO_PAGES(
 				eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
 
+			e820_register_active_regions(node, node_start_pfn[node],
+							node_end_pfn[node]);
 			memory_present(node,
 				node_start_pfn[node], node_end_pfn[node]);
 			node_remap_size[node] = node_memmap_size_bytes(node,
@@ -67,23 +71,35 @@ static void __init smp_dump_qct(void)
 	}
 }
 
-/*
- * Unlike Summit, we don't really care to let the NUMA-Q
- * fall back to flat mode.  Don't compile for NUMA-Q
- * unless you really need it!
- */
+static __init void early_check_numaq(void)
+{
+	/*
+	 * Find possible boot-time SMP configuration:
+	 */
+	early_find_smp_config();
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		early_get_smp_config();
+}
+
 int __init get_memcfg_numaq(void)
 {
+	early_check_numaq();
+	if (!found_numaq)
+		return 0;
 	smp_dump_qct();
 	return 1;
 }
 
-static int __init numaq_tsc_disable(void)
+void __init numaq_tsc_disable(void)
 {
+	if (!found_numaq)
+		return -1;
+
 	if (num_online_nodes() > 1) {
 		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
 		setup_clear_cpu_cap(X86_FEATURE_TSC);
 	}
-	return 0;
 }
-arch_initcall(numaq_tsc_disable);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 74f0c5ea2a03..e0f571d58c19 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -30,6 +30,7 @@
 #include <asm/setup.h>
 #include <asm/arch_hooks.h>
 #include <asm/time.h>
+#include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
 #include <asm/fixmap.h>
@@ -139,7 +140,9 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		/* If the operation is a nop, then nop the callsite */
 		ret = paravirt_patch_nop();
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
-		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
+		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
+		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
+		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64))
 		/* If operation requires a jmp, then jmp */
 		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
 	else
@@ -190,7 +193,9 @@ static void native_flush_tlb_single(unsigned long addr)
 
 /* These are in entry.S */
 extern void native_iret(void);
-extern void native_irq_enable_syscall_ret(void);
+extern void native_irq_enable_sysexit(void);
+extern void native_usergs_sysret32(void);
+extern void native_usergs_sysret64(void);
 
 static int __init print_banner(void)
 {
@@ -280,7 +285,7 @@ struct pv_time_ops pv_time_ops = {
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
 	.sched_clock = native_sched_clock,
-	.get_cpu_khz = native_calculate_cpu_khz,
+	.get_tsc_khz = native_calibrate_tsc,
 };
 
 struct pv_irq_ops pv_irq_ops = {
@@ -291,6 +296,9 @@ struct pv_irq_ops pv_irq_ops = {
 	.irq_enable = native_irq_enable,
 	.safe_halt = native_safe_halt,
 	.halt = native_halt,
+#ifdef CONFIG_X86_64
+	.adjust_exception_frame = paravirt_nop,
+#endif
 };
 
 struct pv_cpu_ops pv_cpu_ops = {
@@ -321,12 +329,23 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.store_idt = native_store_idt,
 	.store_tr = native_store_tr,
 	.load_tls = native_load_tls,
+#ifdef CONFIG_X86_64
+	.load_gs_index = native_load_gs_index,
+#endif
 	.write_ldt_entry = native_write_ldt_entry,
 	.write_gdt_entry = native_write_gdt_entry,
 	.write_idt_entry = native_write_idt_entry,
 	.load_sp0 = native_load_sp0,
 
-	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
+#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
+	.irq_enable_sysexit = native_irq_enable_sysexit,
+#endif
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_IA32_EMULATION
+	.usergs_sysret32 = native_usergs_sysret32,
+#endif
+	.usergs_sysret64 = native_usergs_sysret64,
+#endif
 	.iret = native_iret,
 	.swapgs = native_swapgs,
 
@@ -366,6 +385,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.flush_tlb_single = native_flush_tlb_single,
 	.flush_tlb_others = native_flush_tlb_others,
 
+	.pgd_alloc = __paravirt_pgd_alloc,
+	.pgd_free = paravirt_nop,
+
 	.alloc_pte = paravirt_nop,
 	.alloc_pmd = paravirt_nop,
 	.alloc_pmd_clone = paravirt_nop,
@@ -380,6 +402,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
+	.ptep_modify_prot_start = __ptep_modify_prot_start,
+	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
+
 #ifdef CONFIG_HIGHPTE
 	.kmap_atomic_pte = kmap_atomic,
 #endif
@@ -403,6 +428,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
+	.pte_flags = native_pte_val,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
@@ -416,6 +442,8 @@ struct pv_mmu_ops pv_mmu_ops = {
 		.enter = paravirt_nop,
 		.leave = paravirt_nop,
 	},
+
+	.set_fixmap = native_set_fixmap,
 };
 
 EXPORT_SYMBOL_GPL(pv_time_ops);
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index 82fc5fcab4f4..58262218781b 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -5,7 +5,7 @@ DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
 DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
 DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
 DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit");
 DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
 DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
@@ -29,7 +29,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, restore_fl);
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_cpu_ops, iret);
-		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
 		PATCH_SITE(pv_mmu_ops, read_cr3);
 		PATCH_SITE(pv_mmu_ops, write_cr3);
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index 7d904e138d7e..061d01df9ae6 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -14,8 +14,9 @@ DEF_NATIVE(pv_mmu_ops, flush_tlb_single, "invlpg (%rdi)");
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 DEF_NATIVE(pv_cpu_ops, wbinvd, "wbinvd");
 
-/* the three commands give us more control to how to return from a syscall */
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "movq %gs:" __stringify(pda_oldrsp) ", %rsp; swapgs; sysretq;");
+DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "swapgs; sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, usergs_sysret64, "swapgs; sysretq");
+DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl");
 DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
@@ -35,7 +36,9 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, irq_disable);
 		PATCH_SITE(pv_cpu_ops, iret);
-		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
+		PATCH_SITE(pv_cpu_ops, usergs_sysret32);
+		PATCH_SITE(pv_cpu_ops, usergs_sysret64);
 		PATCH_SITE(pv_cpu_ops, swapgs);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
 		PATCH_SITE(pv_mmu_ops, read_cr3);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index e28ec497e142..6959b5c45df4 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1394,7 +1394,7 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1459,7 +1459,7 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (end_pfn > MAX_DMA32_PFN)
+		if (max_pfn > MAX_DMA32_PFN)
 			printk(KERN_ERR "WARNING more than 4GB of memory, "
 					"32bit PCI may malfunction.\n");
 		return ret;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index dc00a1331ace..8467ec2320f1 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -7,6 +7,7 @@
 #include <asm/dma.h>
 #include <asm/gart.h>
 #include <asm/calgary.h>
+#include <asm/amd_iommu.h>
 
 int forbid_dac __read_mostly;
 EXPORT_SYMBOL(forbid_dac);
@@ -74,13 +75,17 @@ early_param("dma32_size", parse_dma32_size_opt);
 void __init dma32_reserve_bootmem(void)
 {
 	unsigned long size, align;
-	if (end_pfn <= MAX_DMA32_PFN)
+	if (max_pfn <= MAX_DMA32_PFN)
 		return;
 
+	/*
+	 * check aperture_64.c allocate_aperture() for reason about
+	 * using 512M as goal
+	 */
 	align = 64ULL<<20;
 	size = round_up(dma32_bootmem_size, align);
 	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
-				 __pa(MAX_DMA_ADDRESS));
+				 512ULL<<20);
 	if (dma32_bootmem_ptr)
 		dma32_bootmem_size = size;
 	else
@@ -88,17 +93,14 @@ void __init dma32_reserve_bootmem(void)
 }
 static void __init dma32_free_bootmem(void)
 {
-	int node;
 
-	if (end_pfn <= MAX_DMA32_PFN)
+	if (max_pfn <= MAX_DMA32_PFN)
 		return;
 
 	if (!dma32_bootmem_ptr)
 		return;
 
-	for_each_online_node(node)
-		free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr),
-				  dma32_bootmem_size);
+	free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
 
 	dma32_bootmem_ptr = NULL;
 	dma32_bootmem_size = 0;
@@ -122,6 +124,8 @@ void __init pci_iommu_alloc(void)
 
 	detect_intel_iommu();
 
+	amd_iommu_detect();
+
 #ifdef CONFIG_SWIOTLB
 	pci_swiotlb_init();
 #endif
@@ -357,7 +361,7 @@ int dma_supported(struct device *dev, u64 mask)
 EXPORT_SYMBOL(dma_supported);
 
 /* Allocate DMA memory on node near device */
-noinline struct page *
+static noinline struct page *
 dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 {
 	int node;
@@ -502,6 +506,8 @@ static int __init pci_iommu_init(void)
 
 	intel_iommu_init();
 
+	amd_iommu_init();
+
 #ifdef CONFIG_GART_IOMMU
 	gart_iommu_init();
 #endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index aa8ec928caa8..c3fe78406d18 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -104,7 +104,6 @@ static unsigned long alloc_iommu(struct device *dev, int size)
 					  size, base_index, boundary_size, 0);
 	}
 	if (offset != -1) {
-		set_bit_string(iommu_gart_bitmap, offset, size);
 		next_bit = offset+size;
 		if (next_bit >= iommu_pages) {
 			next_bit = 0;
@@ -534,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
 	unsigned aper_size = 0, aper_base_32, aper_order;
 	u64 aper_base;
 
-	pci_read_config_dword(dev, 0x94, &aper_base_32);
-	pci_read_config_dword(dev, 0x90, &aper_order);
+	pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32);
+	pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order);
 	aper_order = (aper_order >> 1) & 7;
 
 	aper_base = aper_base_32 & 0x7fff;
@@ -549,14 +548,63 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
 	return aper_base;
 }
 
+static void enable_gart_translations(void)
+{
+	int i;
+
+	for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
+
+		enable_gart_translation(dev, __pa(agp_gatt_table));
+	}
+}
+
+/*
+ * If fix_up_north_bridges is set, the north bridges have to be fixed up on
+ * resume in the same way as they are handled in gart_iommu_hole_init().
+ */
+static bool fix_up_north_bridges;
+static u32 aperture_order;
+static u32 aperture_alloc;
+
+void set_up_gart_resume(u32 aper_order, u32 aper_alloc)
+{
+	fix_up_north_bridges = true;
+	aperture_order = aper_order;
+	aperture_alloc = aper_alloc;
+}
+
 static int gart_resume(struct sys_device *dev)
 {
+	printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n");
+
+	if (fix_up_north_bridges) {
+		int i;
+
+		printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n");
+
+		for (i = 0; i < num_k8_northbridges; i++) {
+			struct pci_dev *dev = k8_northbridges[i];
+
+			/*
+			 * Don't enable translations just yet.  That is the next
+			 * step.  Restore the pre-suspend aperture settings.
+			 */
+			pci_write_config_dword(dev, AMD64_GARTAPERTURECTL,
+						aperture_order << 1);
+			pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE,
+						aperture_alloc >> 25);
+		}
+	}
+
+	enable_gart_translations();
+
 	return 0;
 }
 
 static int gart_suspend(struct sys_device *dev, pm_message_t state)
 {
-	return -EINVAL;
+	return 0;
 }
 
 static struct sysdev_class gart_sysdev_class = {
@@ -582,6 +630,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	struct pci_dev *dev;
 	void *gatt;
 	int i, error;
+	unsigned long start_pfn, end_pfn;
 
 	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
 	aper_size = aper_base = info->aper_size = 0;
@@ -614,31 +663,25 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	memset(gatt, 0, gatt_size);
 	agp_gatt_table = gatt;
 
-	for (i = 0; i < num_k8_northbridges; i++) {
-		u32 gatt_reg;
-		u32 ctl;
-
-		dev = k8_northbridges[i];
-		gatt_reg = __pa(gatt) >> 12;
-		gatt_reg <<= 4;
-		pci_write_config_dword(dev, 0x98, gatt_reg);
-		pci_read_config_dword(dev, 0x90, &ctl);
-
-		ctl |= 1;
-		ctl &= ~((1<<4) | (1<<5));
-
-		pci_write_config_dword(dev, 0x90, ctl);
-	}
+	enable_gart_translations();
 
 	error = sysdev_class_register(&gart_sysdev_class);
 	if (!error)
 		error = sysdev_register(&device_gart);
 	if (error)
 		panic("Could not register gart_sysdev -- would corrupt data on next suspend");
+
 	flush_gart();
 
 	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
+
+	/* need to map that range */
+	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	if (end_pfn > max_low_pfn_mapped) {
+		start_pfn = (aper_base>>PAGE_SHIFT);
+		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+	}
 	return 0;
 
  nommu:
@@ -677,11 +720,11 @@ void gart_iommu_shutdown(void)
 		u32 ctl;
 
 		dev = k8_northbridges[i];
-		pci_read_config_dword(dev, 0x90, &ctl);
+		pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
 
-		ctl &= ~1;
+		ctl &= ~GARTEN;
 
-		pci_write_config_dword(dev, 0x90, ctl);
+		pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 	}
 }
 
@@ -716,10 +759,10 @@ void __init gart_iommu_init(void)
 		return;
 
 	if (no_iommu ||
-	    (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
+	    (!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
-		if (end_pfn > MAX_DMA32_PFN) {
+		if (max_pfn > MAX_DMA32_PFN) {
 			printk(KERN_WARNING "More than 4GB of memory "
 			       	          "but GART IOMMU not available.\n"
 			       KERN_WARNING "falling back to iommu=soft.\n");
@@ -788,10 +831,10 @@ void __init gart_iommu_init(void)
 	wbinvd();
 
 	/*
-	 * Try to workaround a bug (thanks to BenH)
+	 * Try to workaround a bug (thanks to BenH):
 	 * Set unmapped entries to a scratch page instead of 0.
 	 * Any prefetches that hit unmapped entries won't get an bus abort
-	 * then.
+	 * then. (P2P bridge may be prefetching on DMA reads).
 	 */
 	scratch = get_zeroed_page(GFP_KERNEL);
 	if (!scratch)
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 490da7f4b8d0..82299cd1d04d 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -38,7 +38,7 @@ const struct dma_mapping_ops swiotlb_dma_ops = {
 void __init pci_swiotlb_init(void)
 {
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
-	if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN)
+	if (!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN)
 	       swiotlb = 1;
 	if (swiotlb_force)
 		swiotlb = 1;
diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms_32.c
new file mode 100644
index 000000000000..675a48c404a5
--- /dev/null
+++ b/arch/x86/kernel/probe_roms_32.c
@@ -0,0 +1,166 @@
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/mmzone.h>
+#include <linux/ioport.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+
+
+#include <asm/e820.h>
+#include <asm/mmzone.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <setup_arch.h>
+
+static struct resource system_rom_resource = {
+	.name	= "System ROM",
+	.start	= 0xf0000,
+	.end	= 0xfffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource extension_rom_resource = {
+	.name	= "Extension ROM",
+	.start	= 0xe0000,
+	.end	= 0xeffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource adapter_rom_resources[] = { {
+	.name 	= "Adapter ROM",
+	.start	= 0xc8000,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+} };
+
+static struct resource video_rom_resource = {
+	.name 	= "Video ROM",
+	.start	= 0xc0000,
+	.end	= 0xc7fff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+#define ROMSIGNATURE 0xaa55
+
+static int __init romsignature(const unsigned char *rom)
+{
+	const unsigned short * const ptr = (const unsigned short *)rom;
+	unsigned short sig;
+
+	return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
+}
+
+static int __init romchecksum(const unsigned char *rom, unsigned long length)
+{
+	unsigned char sum, c;
+
+	for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
+		sum += c;
+	return !length && !sum;
+}
+
+void __init probe_roms(void)
+{
+	const unsigned char *rom;
+	unsigned long start, length, upper;
+	unsigned char c;
+	int i;
+
+	/* video rom */
+	upper = adapter_rom_resources[0].start;
+	for (start = video_rom_resource.start; start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		video_rom_resource.start = start;
+
+		if (probe_kernel_address(rom + 2, c) != 0)
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = c * 512;
+
+		/* if checksum okay, trust length byte */
+		if (length && romchecksum(rom, length))
+			video_rom_resource.end = start + length - 1;
+
+		request_resource(&iomem_resource, &video_rom_resource);
+		break;
+	}
+
+	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
+	if (start < upper)
+		start = upper;
+
+	/* system rom */
+	request_resource(&iomem_resource, &system_rom_resource);
+	upper = system_rom_resource.start;
+
+	/* check for extension rom (ignore length byte!) */
+	rom = isa_bus_to_virt(extension_rom_resource.start);
+	if (romsignature(rom)) {
+		length = extension_rom_resource.end - extension_rom_resource.start + 1;
+		if (romchecksum(rom, length)) {
+			request_resource(&iomem_resource, &extension_rom_resource);
+			upper = extension_rom_resource.start;
+		}
+	}
+
+	/* check for adapter roms on 2k boundaries */
+	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		if (probe_kernel_address(rom + 2, c) != 0)
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = c * 512;
+
+		/* but accept any length that fits if checksum okay */
+		if (!length || start + length > upper || !romchecksum(rom, length))
+			continue;
+
+		adapter_rom_resources[i].start = start;
+		adapter_rom_resources[i].end = start + length - 1;
+		request_resource(&iomem_resource, &adapter_rom_resources[i]);
+
+		start = adapter_rom_resources[i++].end & ~2047UL;
+	}
+}
+
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ba370dc8685b..4061d63aabe7 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/clockchips.h>
 
 struct kmem_cache *task_xstate_cachep;
 
@@ -45,6 +46,76 @@ void arch_task_cache_init(void)
 				  SLAB_PANIC, NULL);
 }
 
+/*
+ * Idle related variables and functions
+ */
+unsigned long boot_option_idle_override = 0;
+EXPORT_SYMBOL(boot_option_idle_override);
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+#ifdef CONFIG_X86_32
+/*
+ * This halt magic was a workaround for ancient floppy DMA
+ * wreckage. It should be safe to remove.
+ */
+static int hlt_counter;
+void disable_hlt(void)
+{
+	hlt_counter++;
+}
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+	hlt_counter--;
+}
+EXPORT_SYMBOL(enable_hlt);
+
+static inline int hlt_use_halt(void)
+{
+	return (!hlt_counter && boot_cpu_data.hlt_works_ok);
+}
+#else
+static inline int hlt_use_halt(void)
+{
+	return 1;
+}
+#endif
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+	if (hlt_use_halt()) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we
+		 * test NEED_RESCHED:
+		 */
+		smp_mb();
+
+		if (!need_resched())
+			safe_halt();	/* enables interrupts racelessly */
+		else
+			local_irq_enable();
+		current_thread_info()->status |= TS_POLLING;
+	} else {
+		local_irq_enable();
+		/* loop is done by the caller */
+		cpu_relax();
+	}
+}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(default_idle);
+#endif
+
 static void do_nothing(void *unused)
 {
 }
@@ -122,44 +193,129 @@ static void poll_idle(void)
  *
  * idle=mwait overrides this decision and forces the usage of mwait.
  */
+
+#define MWAIT_INFO			0x05
+#define MWAIT_ECX_EXTENDED_INFO		0x01
+#define MWAIT_EDX_C1			0xf0
+
 static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 {
+	u32 eax, ebx, ecx, edx;
+
 	if (force_mwait)
 		return 1;
 
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		switch(c->x86) {
-		case 0x10:
-		case 0x11:
-			return 0;
-		}
-	}
+	if (c->cpuid_level < MWAIT_INFO)
+		return 0;
+
+	cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx);
+	/* Check, whether EDX has extended info about MWAIT */
+	if (!(ecx & MWAIT_ECX_EXTENDED_INFO))
+		return 1;
+
+	/*
+	 * edx enumeratios MONITOR/MWAIT extensions. Check, whether
+	 * C1  supports MWAIT
+	 */
+	return (edx & MWAIT_EDX_C1);
+}
+
+/*
+ * Check for AMD CPUs, which have potentially C1E support
+ */
+static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
+{
+	if (c->x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	if (c->x86 < 0x0F)
+		return 0;
+
+	/* Family 0x0f models < rev F do not have C1E */
+	if (c->x86 == 0x0f && c->x86_model < 0x40)
+		return 0;
+
 	return 1;
 }
 
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+/*
+ * C1E aware idle routine. We check for C1E active in the interrupt
+ * pending message MSR. If we detect C1E, then we handle it the same
+ * way as C3 power states (local apic timer and TSC stop)
+ */
+static void c1e_idle(void)
 {
-	static int selected;
+	static cpumask_t c1e_mask = CPU_MASK_NONE;
+	static int c1e_detected;
 
-	if (selected)
+	if (need_resched())
 		return;
+
+	if (!c1e_detected) {
+		u32 lo, hi;
+
+		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
+			c1e_detected = 1;
+			mark_tsc_unstable("TSC halt in C1E");
+			printk(KERN_INFO "System has C1E enabled\n");
+		}
+	}
+
+	if (c1e_detected) {
+		int cpu = smp_processor_id();
+
+		if (!cpu_isset(cpu, c1e_mask)) {
+			cpu_set(cpu, c1e_mask);
+			/*
+			 * Force broadcast so ACPI can not interfere. Needs
+			 * to run with interrupts enabled as it uses
+			 * smp_function_call.
+			 */
+			local_irq_enable();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+					   &cpu);
+			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
+			       cpu);
+			local_irq_disable();
+		}
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
+
+		default_idle();
+
+		/*
+		 * The switch back from broadcast mode needs to be
+		 * called with interrupts disabled.
+		 */
+		 local_irq_disable();
+		 clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+		 local_irq_enable();
+	} else
+		default_idle();
+}
+
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+{
 #ifdef CONFIG_X86_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
 		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
 	}
 #endif
+	if (pm_idle)
+		return;
+
 	if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
 		/*
-		 * Skip, if setup has overridden idle.
 		 * One CPU supports mwait => All CPUs supports mwait
 		 */
-		if (!pm_idle) {
-			printk(KERN_INFO "using mwait in idle threads.\n");
-			pm_idle = mwait_idle;
-		}
-	}
-	selected = 1;
+		printk(KERN_INFO "using mwait in idle threads.\n");
+		pm_idle = mwait_idle;
+	} else if (check_c1e_idle(c)) {
+		printk(KERN_INFO "using C1E aware idle routine\n");
+		pm_idle = c1e_idle;
+	} else
+		pm_idle = default_idle;
 }
 
 static int __init idle_setup(char *str)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index e2db9ac5c61c..9a139f6c9df3 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -58,11 +58,6 @@
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-static int hlt_counter;
-
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
 
@@ -77,57 +72,24 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return ((unsigned long *)tsk->thread.sp)[3];
 }
 
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
+#ifdef CONFIG_HOTPLUG_CPU
+#include <asm/nmi.h>
 
-void disable_hlt(void)
+static void cpu_exit_clear(void)
 {
-	hlt_counter++;
-}
+	int cpu = raw_smp_processor_id();
 
-EXPORT_SYMBOL(disable_hlt);
+	idle_task_exit();
 
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
+	cpu_uninit();
+	irq_ctx_exit(cpu);
 
-EXPORT_SYMBOL(enable_hlt);
-
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-void default_idle(void)
-{
-	if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
-		current_thread_info()->status &= ~TS_POLLING;
-		/*
-		 * TS_POLLING-cleared state must be visible before we
-		 * test NEED_RESCHED:
-		 */
-		smp_mb();
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
 
-		if (!need_resched())
-			safe_halt();	/* enables interrupts racelessly */
-		else
-			local_irq_enable();
-		current_thread_info()->status |= TS_POLLING;
-	} else {
-		local_irq_enable();
-		/* loop is done by the caller */
-		cpu_relax();
-	}
+	numa_remove_cpu(cpu);
 }
-#ifdef CONFIG_APM_MODULE
-EXPORT_SYMBOL(default_idle);
-#endif
 
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/nmi.h>
 /* We don't actually take CPU down, just spin without interrupts. */
 static inline void play_dead(void)
 {
@@ -168,24 +130,19 @@ void cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick();
 		while (!need_resched()) {
-			void (*idle)(void);
 
 			check_pgt_cache();
 			rmb();
-			idle = pm_idle;
 
 			if (rcu_pending(cpu))
 				rcu_check_callbacks(cpu, 0);
 
-			if (!idle)
-				idle = default_idle;
-
 			if (cpu_is_offline(cpu))
 				play_dead();
 
 			local_irq_disable();
 			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
-			idle();
+			pm_idle();
 		}
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c6eb5c91e5f6..db5eb963e4df 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -56,15 +56,6 @@ asmlinkage extern void ret_from_fork(void);
 
 unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
 
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
 
 void idle_notifier_register(struct notifier_block *n)
@@ -94,25 +85,6 @@ void exit_idle(void)
 	__exit_idle();
 }
 
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-void default_idle(void)
-{
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();	/* enables interrupts racelessly */
-	else
-		local_irq_enable();
-	current_thread_info()->status |= TS_POLLING;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 DECLARE_PER_CPU(int, cpu_state);
 
@@ -150,12 +122,9 @@ void cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick();
 		while (!need_resched()) {
-			void (*idle)(void);
 
 			rmb();
-			idle = pm_idle;
-			if (!idle)
-				idle = default_idle;
+
 			if (cpu_is_offline(smp_processor_id()))
 				play_dead();
 			/*
@@ -165,7 +134,7 @@ void cpu_idle(void)
 			 */
 			local_irq_disable();
 			enter_idle();
-			idle();
+			pm_idle();
 			/* In many cases the interrupt that ended idle
 			   has already called exit_idle. But some idle
 			   loops can be woken up without interrupt. */
@@ -366,10 +335,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
 
-	asm("mov %%gs,%0" : "=m" (p->thread.gsindex));
-	asm("mov %%fs,%0" : "=m" (p->thread.fsindex));
-	asm("mov %%es,%0" : "=m" (p->thread.es));
-	asm("mov %%ds,%0" : "=m" (p->thread.ds));
+	savesegment(gs, p->thread.gsindex);
+	savesegment(fs, p->thread.fsindex);
+	savesegment(es, p->thread.es);
+	savesegment(ds, p->thread.ds);
 
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
@@ -408,7 +377,9 @@ out:
 void
 start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 {
-	asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0));
+	loadsegment(fs, 0);
+	loadsegment(es, 0);
+	loadsegment(ds, 0);
 	load_gs_index(0);
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
@@ -567,6 +538,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+	unsigned fsindex, gsindex;
 
 	/* we're going to use this soon, after a few expensive things */
 	if (next_p->fpu_counter>5)
@@ -581,22 +553,38 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * Switch DS and ES.
 	 * This won't pick up thread selector changes, but I guess that is ok.
 	 */
-	asm volatile("mov %%es,%0" : "=m" (prev->es));
+	savesegment(es, prev->es);
 	if (unlikely(next->es | prev->es))
 		loadsegment(es, next->es); 
-	
-	asm volatile ("mov %%ds,%0" : "=m" (prev->ds));
+
+	savesegment(ds, prev->ds);
 	if (unlikely(next->ds | prev->ds))
 		loadsegment(ds, next->ds);
 
+
+	/* We must save %fs and %gs before load_TLS() because
+	 * %fs and %gs may be cleared by load_TLS().
+	 *
+	 * (e.g. xen_load_tls())
+	 */
+	savesegment(fs, fsindex);
+	savesegment(gs, gsindex);
+
 	load_TLS(next, cpu);
 
+	/*
+	 * Leave lazy mode, flushing any hypercalls made here.
+	 * This must be done before restoring TLS segments so
+	 * the GDT and LDT are properly updated, and must be
+	 * done before math_state_restore, so the TS bit is up
+	 * to date.
+	 */
+	arch_leave_lazy_cpu_mode();
+
 	/* 
 	 * Switch FS and GS.
 	 */
 	{ 
-		unsigned fsindex;
-		asm volatile("movl %%fs,%0" : "=r" (fsindex)); 
 		/* segment register != 0 always requires a reload. 
 		   also reload when it has changed. 
 		   when prev process used 64bit base always reload
@@ -614,10 +602,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		if (next->fs) 
 			wrmsrl(MSR_FS_BASE, next->fs); 
 		prev->fsindex = fsindex;
-	}
-	{ 
-		unsigned gsindex;
-		asm volatile("movl %%gs,%0" : "=r" (gsindex)); 
+
 		if (unlikely(gsindex | next->gsindex | prev->gs)) {
 			load_gs_index(next->gsindex);
 			if (gsindex)
@@ -798,7 +783,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			set_32bit_tls(task, FS_TLS, addr);
 			if (doit) {
 				load_TLS(&task->thread, cpu);
-				asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL));
+				loadsegment(fs, FS_TLS_SEL);
 			}
 			task->thread.fsindex = FS_TLS_SEL;
 			task->thread.fs = 0;
@@ -808,7 +793,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 			if (doit) {
 				/* set the selector to 0 to not confuse
 				   __switch_to */
-				asm volatile("movl %0,%%fs" :: "r" (0));
+				loadsegment(fs, 0);
 				ret = checking_wrmsrl(MSR_FS_BASE, addr);
 			}
 		}
@@ -831,7 +816,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 		if (task->thread.gsindex == GS_TLS_SEL)
 			base = read_32bit_tls(task, GS_TLS);
 		else if (doit) {
-			asm("movl %%gs,%0" : "=r" (gsindex));
+			savesegment(gs, gsindex);
 			if (gsindex)
 				rdmsrl(MSR_KERNEL_GS_BASE, base);
 			else
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index a7835f282936..77040b6070e1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -943,13 +943,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		return copy_regset_to_user(child, &user_x86_32_view,
 					   REGSET_XFP,
 					   0, sizeof(struct user_fxsr_struct),
-					   datap);
+					   datap) ? -EIO : 0;
 
 	case PTRACE_SETFPXREGS:	/* Set the child extended FPU state. */
 		return copy_regset_from_user(child, &user_x86_32_view,
 					     REGSET_XFP,
 					     0, sizeof(struct user_fxsr_struct),
-					     datap);
+					     datap) ? -EIO : 0;
 #endif
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index d89a648fe710..79bdcd11c66e 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -65,6 +65,7 @@ static enum {
 	ICH_FORCE_HPET_RESUME,
 	VT8237_FORCE_HPET_RESUME,
 	NVIDIA_FORCE_HPET_RESUME,
+	ATI_FORCE_HPET_RESUME,
 } force_hpet_resume_type;
 
 static void __iomem *rcba_base;
@@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev)
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
 			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
+			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
 			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
@@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
 
 static struct pci_dev *cached_dev;
 
+static void hpet_print_force_info(void)
+{
+	printk(KERN_INFO "HPET not enabled in BIOS. "
+	       "You might try hpet=force boot option\n");
+}
+
 static void old_ich_force_hpet_resume(void)
 {
 	u32 val;
@@ -253,6 +262,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
 {
 	if (hpet_force_user)
 		old_ich_force_enable_hpet(dev);
+	else
+		hpet_print_force_info();
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
@@ -290,8 +301,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 uninitialized_var(val);
 
-	if (!hpet_force_user || hpet_address || force_hpet_address)
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
 		return;
+	}
 
 	pci_read_config_dword(dev, 0x68, &val);
 	/*
@@ -330,6 +346,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
 			 vt8237_force_enable_hpet);
 
+static void ati_force_hpet_resume(void)
+{
+	pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
+	printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void ati_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 uninitialized_var(val);
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
+		return;
+	}
+
+	pci_write_config_dword(dev, 0x14, 0xfed00000);
+	pci_read_config_dword(dev, 0x14, &val);
+	force_hpet_address = val;
+	force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+		   force_hpet_address);
+	cached_dev = dev;
+	return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+			 ati_force_enable_hpet);
+
 /*
  * Undocumented chipset feature taken from LinuxBIOS.
  */
@@ -343,8 +389,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 uninitialized_var(val);
 
-	if (!hpet_force_user || hpet_address || force_hpet_address)
+	if (hpet_address || force_hpet_address)
+		return;
+
+	if (!hpet_force_user) {
+		hpet_print_force_info();
 		return;
+	}
 
 	pci_write_config_dword(dev, 0x44, 0xfed00001);
 	pci_read_config_dword(dev, 0x44, &val);
@@ -397,6 +448,9 @@ void force_hpet_resume(void)
 	case NVIDIA_FORCE_HPET_RESUME:
 		nvidia_force_hpet_resume();
 		return;
+	case ATI_FORCE_HPET_RESUME:
+		ati_force_hpet_resume();
+		return;
 	default:
 		break;
 	}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f6be7d5f82f8..f8a62160e151 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -27,7 +27,7 @@
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-static long no_idt[3];
+static const struct desc_ptr no_idt = {};
 static int reboot_mode;
 enum reboot_type reboot_type = BOOT_KBD;
 int reboot_force;
@@ -201,15 +201,15 @@ core_initcall(reboot_init);
    controller to pulse the CPU reset line, which is more thorough, but
    doesn't work with at least one type of 486 motherboard.  It is easy
    to stop this code working; hence the copious comments. */
-static unsigned long long
+static const unsigned long long
 real_mode_gdt_entries [3] =
 {
 	0x0000000000000000ULL,	/* Null descriptor */
-	0x00009a000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
-	0x000092000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
+	0x00009b000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
+	0x000093000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
 };
 
-static struct desc_ptr
+static const struct desc_ptr
 real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries },
 real_mode_idt = { 0x3ff, 0 };
 
@@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 };
 
    More could be done here to set up the registers as if a CPU reset had
    occurred; hopefully real BIOSs don't assume much. */
-static unsigned char real_mode_switch [] =
+static const unsigned char real_mode_switch [] =
 {
 	0x66, 0x0f, 0x20, 0xc0,			/*    movl  %cr0,%eax        */
 	0x66, 0x83, 0xe0, 0x11,			/*    andl  $0x00000011,%eax */
@@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] =
 	0x24, 0x10,				/* f: andb  $0x10,al         */
 	0x66, 0x0f, 0x22, 0xc0			/*    movl  %eax,%cr0        */
 };
-static unsigned char jump_to_bios [] =
+static const unsigned char jump_to_bios [] =
 {
 	0xea, 0x00, 0x00, 0xff, 0xff		/*    ljmp  $0xffff,$0x0000  */
 };
@@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] =
  * specified by the code and length parameters.
  * We assume that length will aways be less that 100!
  */
-void machine_real_restart(unsigned char *code, int length)
+void machine_real_restart(const unsigned char *code, int length)
 {
 	local_irq_disable();
 
@@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void)
 			}
 
 		case BOOT_TRIPLE:
-			load_idt((const struct desc_ptr *)&no_idt);
+			load_idt(&no_idt);
 			__asm__ __volatile__("int3");
 
 			reboot_type = BOOT_KBD;
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index dec0b5ec25c2..61a837743fe5 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -49,7 +49,7 @@ struct device_fixup {
 	void (*reboot_fixup)(struct pci_dev *);
 };
 
-static struct device_fixup fixups_table[] = {
+static const struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
 { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
@@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = {
  */
 void mach_reboot_fixups(void)
 {
-	struct device_fixup *cur;
+	const struct device_fixup *cur;
 	struct pci_dev *dev;
 	int i;
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6f80b852a196..36c540d4ac4b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1,139 +1,889 @@
-#include <linux/kernel.h>
+/*
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ *  Memory region support
+ *	David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ *  Added E820 sanitization routine (removes overlapping memory regions);
+ *  Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ *  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *  Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
+#include <linux/efi.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
+#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <linux/kallsyms.h>
+#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/kexec.h>
+#include <linux/cpufreq.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+
 #include <linux/percpu.h>
+#include <linux/crash_dump.h>
+
+#include <video/edid.h>
+
+#include <asm/mtrr.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/efi.h>
+#include <asm/sections.h>
+#include <asm/dmi.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/vmi.h>
+#include <setup_arch.h>
+#include <asm/bios_ebda.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/bugs.h>
+
+#include <asm/system.h>
+#include <asm/vsyscall.h>
 #include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/dma.h>
+#include <asm/gart.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+
+#include <mach_apic.h>
+#include <asm/paravirt.h>
+
 #include <asm/percpu.h>
 #include <asm/sections.h>
-#include <asm/processor.h>
-#include <asm/setup.h>
 #include <asm/topology.h>
-#include <asm/mpspec.h>
 #include <asm/apicdef.h>
+#ifdef CONFIG_X86_64
+#include <asm/numa_64.h>
+#endif
 
-#ifdef CONFIG_X86_LOCAL_APIC
-unsigned int num_processors;
-unsigned disabled_cpus __cpuinitdata;
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
+#ifndef ARCH_SETUP
+#define ARCH_SETUP
+#endif
+
+#ifndef CONFIG_DEBUG_BOOT_PARAMS
+struct boot_params __initdata boot_params;
+#else
+struct boot_params boot_params;
+#endif
+
+/*
+ * Machine setup..
+ */
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource bss_resource = {
+	.name	= "Kernel bss",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+
+#ifdef CONFIG_X86_32
+/* This value is set up by the early boot code to point to the value
+   immediately after the boot time page tables.  It contains a *physical*
+   address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_start __initdata = ~0UL;
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+static struct resource video_ram_resource = {
+	.name	= "Video RAM area",
+	.start	= 0xa0000,
+	.end	= 0xbffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+EXPORT_SYMBOL(boot_cpu_data);
+static void set_mca_bus(int x)
+{
+#ifdef CONFIG_MCA
+	MCA_bus = x;
+#endif
+}
+
+unsigned int def_to_bigsmp;
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+
+struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+struct ist_info ist_info;
+EXPORT_SYMBOL(ist_info);
+#else
+struct ist_info ist_info;
+#endif
+
+#else
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
+EXPORT_SYMBOL(boot_cpu_data);
+#endif
 
-DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
+#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+unsigned long mmu_cr4_features;
+#else
+unsigned long mmu_cr4_features = X86_CR4_PAE;
 #endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
 /*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ * Early DMI memory
  */
-static void __init setup_per_cpu_maps(void)
+int dmi_alloc_index;
+char dmi_alloc_data[DMI_MAX_DATA];
+
+/*
+ * Setup options
+ */
+struct screen_info screen_info;
+EXPORT_SYMBOL(screen_info);
+struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
+
+extern int root_mountflags;
+
+unsigned long saved_video_mode;
+
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ *              from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
+	    sizeof(edd.mbr_signature));
+     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
+     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
+     edd.edd_info_nr = boot_params.eddbuf_entries;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+#ifdef CONFIG_X86_32
+
+#define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
+static void __init relocate_initrd(void)
 {
-	int cpu;
 
-	for_each_possible_cpu(cpu) {
-		per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu];
-		per_cpu(x86_bios_cpu_apicid, cpu) =
-						x86_bios_cpu_apicid_init[cpu];
-#ifdef CONFIG_NUMA
-		per_cpu(x86_cpu_to_node_map, cpu) =
-						x86_cpu_to_node_map_init[cpu];
+	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+	u64 ramdisk_here;
+	unsigned long slop, clen, mapaddr;
+	char *p, *q;
+
+	/* We need to move the initrd down into lowmem */
+	ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+					 PAGE_SIZE);
+
+	if (ramdisk_here == -1ULL)
+		panic("Cannot find place for new RAMDISK of size %lld\n",
+			 ramdisk_size);
+
+	/* Note: this includes all the lowmem currently occupied by
+	   the initrd, we rely on that fact to keep the data intact. */
+	reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+			 "NEW RAMDISK");
+	initrd_start = ramdisk_here + PAGE_OFFSET;
+	initrd_end   = initrd_start + ramdisk_size;
+	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
+			 ramdisk_here, ramdisk_here + ramdisk_size);
+
+	q = (char *)initrd_start;
+
+	/* Copy any lowmem portion of the initrd */
+	if (ramdisk_image < end_of_lowmem) {
+		clen = end_of_lowmem - ramdisk_image;
+		p = (char *)__va(ramdisk_image);
+		memcpy(q, p, clen);
+		q += clen;
+		ramdisk_image += clen;
+		ramdisk_size  -= clen;
+	}
+
+	/* Copy the highmem portion of the initrd */
+	while (ramdisk_size) {
+		slop = ramdisk_image & ~PAGE_MASK;
+		clen = ramdisk_size;
+		if (clen > MAX_MAP_CHUNK-slop)
+			clen = MAX_MAP_CHUNK-slop;
+		mapaddr = ramdisk_image & PAGE_MASK;
+		p = early_ioremap(mapaddr, clen+slop);
+		memcpy(q, p+slop, clen);
+		early_iounmap(p, clen+slop);
+		q += clen;
+		ramdisk_image += clen;
+		ramdisk_size  -= clen;
+	}
+	/* high pages is not converted by early_res_to_bootmem */
+	ramdisk_image = boot_params.hdr.ramdisk_image;
+	ramdisk_size  = boot_params.hdr.ramdisk_size;
+	printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to"
+		" %08llx - %08llx\n",
+		ramdisk_image, ramdisk_image + ramdisk_size - 1,
+		ramdisk_here, ramdisk_here + ramdisk_size - 1);
+}
 #endif
+
+static void __init reserve_initrd(void)
+{
+	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+	u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+
+	if (!boot_params.hdr.type_of_loader ||
+	    !ramdisk_image || !ramdisk_size)
+		return;		/* No initrd provided by bootloader */
+
+	initrd_start = 0;
+
+	if (ramdisk_size >= (end_of_lowmem>>1)) {
+		free_early(ramdisk_image, ramdisk_end);
+		printk(KERN_ERR "initrd too large to handle, "
+		       "disabling initrd\n");
+		return;
+	}
+
+	printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image,
+			ramdisk_end);
+
+
+	if (ramdisk_end <= end_of_lowmem) {
+		/* All in lowmem, easy case */
+		/*
+		 * don't need to reserve again, already reserved early
+		 * in i386_start_kernel
+		 */
+		initrd_start = ramdisk_image + PAGE_OFFSET;
+		initrd_end = initrd_start + ramdisk_size;
+		return;
 	}
 
-	/* indicate the early static arrays will soon be gone */
-	x86_cpu_to_apicid_early_ptr = NULL;
-	x86_bios_cpu_apicid_early_ptr = NULL;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = NULL;
+#ifdef CONFIG_X86_32
+	relocate_initrd();
+#else
+	printk(KERN_ERR "initrd extends beyond end of memory "
+	       "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
+	       ramdisk_end, end_of_lowmem);
+	initrd_start = 0;
 #endif
+	free_early(ramdisk_image, ramdisk_end);
 }
+#else
+static void __init reserve_initrd(void)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static void __init parse_setup_data(void)
+{
+	struct setup_data *data;
+	u64 pa_data;
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, PAGE_SIZE);
+		switch (data->type) {
+		case SETUP_E820_EXT:
+			parse_e820_ext(data, pa_data);
+			break;
+		default:
+			break;
+		}
+		pa_data = data->next;
+		early_iounmap(data, PAGE_SIZE);
+	}
+}
+
+static void __init e820_reserve_setup_data(void)
+{
+	struct setup_data *data;
+	u64 pa_data;
+	int found = 0;
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, sizeof(*data));
+		e820_update_range(pa_data, sizeof(*data)+data->len,
+			 E820_RAM, E820_RESERVED_KERN);
+		found = 1;
+		pa_data = data->next;
+		early_iounmap(data, sizeof(*data));
+	}
+	if (!found)
+		return;
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	printk(KERN_INFO "extended physical RAM map:\n");
+	e820_print_map("reserve setup_data");
+}
 
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
+static void __init reserve_early_setup_data(void)
 {
-	int i;
+	struct setup_data *data;
+	u64 pa_data;
+	char buf[32];
+
+	if (boot_params.hdr.version < 0x0209)
+		return;
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = early_ioremap(pa_data, sizeof(*data));
+		sprintf(buf, "setup data %x", data->type);
+		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
+		pa_data = data->next;
+		early_iounmap(data, sizeof(*data));
+	}
+}
+
+/*
+ * --------- Crashkernel reservation ------------------------------
+ */
+
+#ifdef CONFIG_KEXEC
+
+/**
+ * Reserve @size bytes of crashkernel memory at any suitable offset.
+ *
+ * @size: Size of the crashkernel memory to reserve.
+ * Returns the base address on success, and -1ULL on failure.
+ */
+unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+{
+	const unsigned long long alignment = 16<<20; 	/* 16M */
+	unsigned long long start = 0LL;
+
+	while (1) {
+		int ret;
+
+		start = find_e820_area(start, ULONG_MAX, size, alignment);
+		if (start == -1ULL)
+			return start;
+
+		/* try to reserve it */
+		ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
+		if (ret >= 0)
+			return start;
+
+		start += alignment;
+	}
+}
 
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long long total;
+
+	total = max_low_pfn - min_low_pfn;
+#ifdef CONFIG_HIGHMEM
+	total += highend_pfn - highstart_pfn;
+#endif
+
+	return total << PAGE_SHIFT;
+}
+
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long total_mem;
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	total_mem = get_total_mem();
+
+	ret = parse_crashkernel(boot_command_line, total_mem,
+			&crash_size, &crash_base);
+	if (ret != 0 || crash_size <= 0)
+		return;
+
+	/* 0 means: find the address automatically */
+	if (crash_base <= 0) {
+		crash_base = find_and_reserve_crashkernel(crash_size);
+		if (crash_base == -1ULL) {
+			pr_info("crashkernel reservation failed. "
+				"No suitable area found.\n");
+			return;
+		}
+	} else {
+		ret = reserve_bootmem_generic(crash_base, crash_size,
+					BOOTMEM_EXCLUSIVE);
+		if (ret < 0) {
+			pr_info("crashkernel reservation failed - "
+				"memory is in use\n");
+			return;
+		}
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+			"for crashkernel (System RAM: %ldMB)\n",
+			(unsigned long)(crash_size >> 20),
+			(unsigned long)(crash_base >> 20),
+			(unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end   = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
 }
 #else
-static inline void setup_cpumask_of_cpu(void) { }
+static void __init reserve_crashkernel(void)
+{
+}
 #endif
 
-#ifdef CONFIG_X86_32
-/*
- * Great future not-so-futuristic plan: make i386 and x86_64 do it
- * the same way
+static struct resource standard_io_resources[] = {
+	{ .name = "dma1", .start = 0x00, .end = 0x1f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic1", .start = 0x20, .end = 0x21,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer0", .start = 0x40, .end = 0x43,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "timer1", .start = 0x50, .end = 0x53,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x60, .end = 0x60,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "keyboard", .start = 0x64, .end = 0x64,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
+	{ .name = "fpu", .start = 0xf0, .end = 0xff,
+		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
+};
+
+static void __init reserve_standard_io_resources(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, &standard_io_resources[i]);
+
+}
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
  */
-unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(__per_cpu_offset);
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
 /*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
+ * Determine if we were loaded by an EFI loader.  If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization.  Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
  */
-void __init setup_per_cpu_areas(void)
+/*
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
+ */
+
+void __init setup_arch(char **cmdline_p)
 {
-	int i, highest_cpu = 0;
-	unsigned long size;
+#ifdef CONFIG_X86_32
+	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	visws_early_detect();
+	pre_setup_arch_hook();
+	early_cpu_init();
+#else
+	printk(KERN_INFO "Command line: %s\n", boot_command_line);
+#endif
 
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
+	early_ioremap_init();
+
+	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
+	screen_info = boot_params.screen_info;
+	edid_info = boot_params.edid_info;
+#ifdef CONFIG_X86_32
+	apm_info.bios = boot_params.apm_bios_info;
+	ist_info = boot_params.ist_info;
+	if (boot_params.sys_desc_table.length != 0) {
+		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
+		machine_id = boot_params.sys_desc_table.table[0];
+		machine_submodel_id = boot_params.sys_desc_table.table[1];
+		BIOS_revision = boot_params.sys_desc_table.table[2];
+	}
+#endif
+	saved_video_mode = boot_params.hdr.vid_mode;
+	bootloader_type = boot_params.hdr.type_of_loader;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
 #endif
+#ifdef CONFIG_EFI
+	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
+#ifdef CONFIG_X86_32
+		     "EL32",
+#else
+		     "EL64",
+#endif
+	 4)) {
+		efi_enabled = 1;
+		efi_reserve_early();
+	}
+#endif
+
+	ARCH_SETUP
 
-	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
-	printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
-			  size);
+	setup_memory_map();
+	parse_setup_data();
+	/* update the e820_saved too */
+	e820_reserve_setup_data();
 
-	for_each_possible_cpu(i) {
-		char *ptr;
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = alloc_bootmem_pages(size);
+	copy_edd();
+
+	if (!boot_params.hdr.root_flags)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+#ifdef CONFIG_X86_32
+	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
 #else
-		int node = early_cpu_to_node(i);
-		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = alloc_bootmem_pages(size);
-			printk(KERN_INFO
-			       "cpu %d has no node or node-local memory\n", i);
-		}
-		else
-			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+	init_mm.brk = (unsigned long) &_end;
 #endif
-		if (!ptr)
-			panic("Cannot allocate cpu data for CPU %d\n", i);
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+	bss_resource.start = virt_to_phys(&__bss_start);
+	bss_resource.end = virt_to_phys(&__bss_stop)-1;
+
 #ifdef CONFIG_X86_64
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+	early_cpu_init();
+#endif
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
+	/* after early param, so could get panic from serial */
+	reserve_early_setup_data();
+
+	if (acpi_mps_check()) {
+#ifdef CONFIG_X86_LOCAL_APIC
+		disable_apic = 1;
+#endif
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	}
+
+	finish_e820_parsing();
+
+#ifdef CONFIG_X86_32
+	probe_roms();
+#endif
+
+	/* after parse_early_param, so could debug it */
+	insert_resource(&iomem_resource, &code_resource);
+	insert_resource(&iomem_resource, &data_resource);
+	insert_resource(&iomem_resource, &bss_resource);
+
+	if (efi_enabled)
+		efi_init();
+
+#ifdef CONFIG_X86_32
+	if (ppro_with_ram_bug()) {
+		e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
+				  E820_RESERVED);
+		sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+		printk(KERN_INFO "fixed physical RAM map:\n");
+		e820_print_map("bad_ppro");
+	}
+#else
+	early_gart_iommu_check();
+#endif
+
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	max_pfn = e820_end_of_ram_pfn();
+
+	/* preallocate 4k for mptable mpc */
+	early_reserve_e820_mpc_new();
+	/* update e820 for memory not covered by WB MTRRs */
+	mtrr_bp_init();
+	if (mtrr_trim_uncached_memory(max_pfn))
+		max_pfn = e820_end_of_ram_pfn();
+
+#ifdef CONFIG_X86_32
+	/* max_low_pfn get updated here */
+	find_low_pfn_range();
 #else
-		__per_cpu_offset[i] = ptr - __per_cpu_start;
+	num_physpages = max_pfn;
+
+	check_efer();
+
+	/* How many end-of-memory variables you have, grandma! */
+	/* need this before calling reserve_initrd */
+	if (max_pfn > (1UL<<(32 - PAGE_SHIFT)))
+		max_low_pfn = e820_end_of_low_ram_pfn();
+	else
+		max_low_pfn = max_pfn;
+
+	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
 #endif
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 
-		highest_cpu = i;
+	/* max_pfn_mapped is updated here */
+	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
+	max_pfn_mapped = max_low_pfn_mapped;
+
+#ifdef CONFIG_X86_64
+	if (max_pfn > max_low_pfn) {
+		max_pfn_mapped = init_memory_mapping(1UL<<32,
+						     max_pfn<<PAGE_SHIFT);
+		/* can we preseve max_low_pfn ?*/
+		max_low_pfn = max_pfn;
 	}
+#endif
+
+	/*
+	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
+	 */
 
-	nr_cpu_ids = highest_cpu + 1;
-	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids);
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	if (init_ohci1394_dma_early)
+		init_ohci1394_dma_on_all_controllers();
+#endif
 
-	/* Setup percpu data maps */
-	setup_per_cpu_maps();
+	reserve_initrd();
 
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
-}
+#ifdef CONFIG_X86_64
+	vsmp_init();
+#endif
+
+	dmi_scan_machine();
+
+	io_delay_init();
+
+	/*
+	 * Parse the ACPI tables for possible boot-time SMP configuration.
+	 */
+	acpi_boot_table_init();
+
+#ifdef CONFIG_ACPI_NUMA
+	/*
+	 * Parse SRAT to discover nodes.
+	 */
+	acpi_numa_init();
+#endif
+
+	initmem_init(0, max_pfn);
+
+#ifdef CONFIG_X86_64
+	dma32_reserve_bootmem();
+#endif
 
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 */
+	acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
 #endif
+	reserve_crashkernel();
+
+	reserve_ibft_region();
+
+#ifdef CONFIG_KVM_CLOCK
+	kvmclock_init();
+#endif
+
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be after max_low_pfn is determined, and before kernel
+	 * pagetables are setup.
+	 */
+	vmi_init();
+#endif
+
+	paging_init();
+
+#ifdef CONFIG_X86_64
+	map_vsyscall();
+#endif
+
+#ifdef CONFIG_X86_GENERICARCH
+	generic_apic_probe();
+#endif
+
+	early_quirks();
+
+	/*
+	 * Read APIC and some other early information from ACPI tables.
+	 */
+	acpi_boot_init();
+
+#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		get_smp_config();
+#endif
+
+	prefill_possible_map();
+#ifdef CONFIG_X86_64
+	init_cpu_to_node();
+#endif
+
+#ifdef CONFIG_X86_NUMAQ
+	/*
+	 * need to check online nodes num, call it
+	 * here before time_init/tsc_init
+	 */
+	numaq_tsc_disable();
+#endif
+
+	init_apic_mappings();
+	ioapic_init_mappings();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+	if (def_to_bigsmp)
+		printk(KERN_WARNING "More than 8 CPUs detected and "
+			"CONFIG_X86_PC cannot handle it.\nUse "
+			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+	kvm_guest_init();
+
+	e820_reserve_resources();
+	e820_mark_nosave_regions(max_low_pfn);
+
+#ifdef CONFIG_X86_32
+	request_resource(&iomem_resource, &video_ram_resource);
+#endif
+	reserve_standard_io_resources();
+
+	e820_setup_gap();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+		conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
deleted file mode 100644
index aee0e8200777..000000000000
--- a/arch/x86/kernel/setup64.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* 
- * X86-64 specific CPU setup.
- * Copyright (C) 1995  Linus Torvalds
- * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen.
- * See setup.c for older changelog.
- */ 
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/i387.h>
-#include <asm/percpu.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/genapic.h>
-
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-struct boot_params __initdata boot_params;
-#else
-struct boot_params boot_params;
-#endif
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata = 0;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on	Enable(default)
-off	Disable
-*/ 
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-                __supported_pte_mask |= _PAGE_NX; 
- 		do_not_nx = 0; 
-	} else if (!strncmp(str, "off", 3)) {
-		do_not_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-        }
-	return 0;
-} 
-early_param("noexec", nonx_setup);
-
-int force_personality32 = 0; 
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off	PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
-	if (!strcmp(str, "on"))
-		force_personality32 &= ~READ_IMPLIES_EXEC;
-	else if (!strcmp(str, "off"))
-		force_personality32 |= READ_IMPLIES_EXEC;
-	return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{ 
-	struct x8664_pda *pda = cpu_pda(cpu);
-
-	/* Setup up data that may be needed in __get_free_pages early */
-	asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); 
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
-
-	pda->cpunumber = cpu; 
-	pda->irqcount = -1;
-	pda->kernelstack = 
-		(unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; 
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
-
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack; 
-	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu); 
-	}
-
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
-} 
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
-	/* 
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to set CS/DS
-	 * but only a 32bit target. LSTAR sets the 64bit rip. 	 
-	 */ 
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32); 
-	wrmsrl(MSR_LSTAR, system_call); 
-	wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION   		
-	syscall32_cpu_init ();
-#endif
-
-	/* Flags to clear on syscall */
-	wrmsrl(MSR_SYSCALL_MASK,
-	       X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer); 
-        if (!(efer & EFER_NX) || do_not_nx) { 
-                __supported_pte_mask &= ~_PAGE_NX; 
-        }       
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init (void)
-{
-	int cpu = stack_smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
-	unsigned long v; 
-	char *estacks = NULL; 
-	struct task_struct *me;
-	int i;
-
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0) {
-		pda_init(cpu);
-	} else 
-		estacks = boot_exception_stacks; 
-
-	me = current;
-
-	if (cpu_test_and_set(cpu, cpu_initialized))
-		panic("CPU#%d already initialized!\n", cpu);
-
-	printk("Initializing CPU#%d\n", cpu);
-
-	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	/*
-	 * Initialize the per-CPU GDT with the boot GDT,
-	 * and set up the GDT descriptor:
-	 */
-	if (cpu)
-		memcpy(get_cpu_gdt_table(cpu), cpu_gdt_table, GDT_SIZE);
-
-	cpu_gdt_descr[cpu].size = GDT_SIZE;
-	load_gdt((const struct desc_ptr *)&cpu_gdt_descr[cpu]);
-	load_idt((const struct desc_ptr *)&idt_descr);
-
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
-
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier(); 
-
-	check_efer();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
-		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu); 
-		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
-	}
-
-	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
-	atomic_inc(&init_mm.mm_count);
-	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, me);
-
-	set_tss_desc(cpu, t);
-	load_TR_desc();
-	load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
-	/*
-	 * If the kgdb is connected no debug regs should be altered.  This
-	 * is only applicable when KGDB and a KGDB I/O module are built
-	 * into the kernel and you are using early debugging with
-	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
-	 */
-	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
-		arch_kgdb_ops.correct_hw_break();
-	else {
-#endif
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
-	/* If the kgdb is connected no debug regs should be altered. */
-	}
-#endif
-
-	fpu_init(); 
-
-	raw_local_save_flags(kernel_eflags);
-
-	if (is_uv_system())
-		uv_cpu_init();
-}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
deleted file mode 100644
index 5a2f8e063887..000000000000
--- a/arch/x86/kernel/setup_32.c
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- *
- *  Memory region support
- *	David Parsons <orc@pell.chi.il.us>, July-August 1999
- *
- *  Added E820 sanitization routine (removes overlapping memory regions);
- *  Brian Moyle <bmoyle@mvista.com>, February 2001
- *
- * Moved CPU detection code to cpu/${cpu}.c
- *    Patrick Mochel <mochel@osdl.org>, March 2002
- *
- *  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *  Alex Achenbach <xela@slit.de>, December 2002.
- *
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/apm_bios.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/mca.h>
-#include <linux/root_dev.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/nodemask.h>
-#include <linux/kexec.h>
-#include <linux/crash_dump.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-#include <linux/pci.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <video/edid.h>
-
-#include <asm/mtrr.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/sections.h>
-#include <asm/io_apic.h>
-#include <asm/ist.h>
-#include <asm/io.h>
-#include <asm/vmi.h>
-#include <setup_arch.h>
-#include <asm/bios_ebda.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-
-/* This value is set up by the early boot code to point to the value
-   immediately after the boot time page tables.  It contains a *physical*
-   address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
-/*
- * Machine setup..
- */
-static struct resource data_resource = {
-	.name	= "Kernel data",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource code_resource = {
-	.name	= "Kernel code",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource bss_resource = {
-	.name	= "Kernel bss",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource video_ram_resource = {
-	.name	= "Video RAM area",
-	.start	= 0xa0000,
-	.end	= 0xbffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource standard_io_resources[] = { {
-	.name	= "dma1",
-	.start	= 0x0000,
-	.end	= 0x001f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic1",
-	.start	= 0x0020,
-	.end	= 0x0021,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer0",
-	.start	= 0x0040,
-	.end    = 0x0043,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name   = "timer1",
-	.start  = 0x0050,
-	.end    = 0x0053,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "keyboard",
-	.start	= 0x0060,
-	.end	= 0x0060,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "keyboard",
-	.start	= 0x0064,
-	.end	= 0x0064,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma page reg",
-	.start	= 0x0080,
-	.end	= 0x008f,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "pic2",
-	.start	= 0x00a0,
-	.end	= 0x00a1,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "dma2",
-	.start	= 0x00c0,
-	.end	= 0x00df,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-}, {
-	.name	= "fpu",
-	.start	= 0x00f0,
-	.end	= 0x00ff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
-} };
-
-/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned int def_to_bigsmp;
-
-#ifndef CONFIG_X86_PAE
-unsigned long mmu_cr4_features;
-#else
-unsigned long mmu_cr4_features = X86_CR4_PAE;
-#endif
-
-/* for MCA, but anyone else can use it if they want */
-unsigned int machine_id;
-unsigned int machine_submodel_id;
-unsigned int BIOS_revision;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/* user-defined highmem size */
-static unsigned int highmem_pages = -1;
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct apm_info apm_info;
-EXPORT_SYMBOL(apm_info);
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-struct ist_info ist_info;
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
-	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-extern void early_cpu_init(void);
-extern int root_mountflags;
-
-unsigned long saved_video_mode;
-
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-struct boot_params __initdata boot_params;
-#else
-struct boot_params boot_params;
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
-	    sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
-     edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-int __initdata user_defined_memmap;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem=  [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "nopentium") == 0) {
-		setup_clear_cpu_cap(X86_FEATURE_PSE);
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long mem_size;
-
-		mem_size = memparse(arg, &arg);
-		limit_regions(mem_size);
-		user_defined_memmap = 1;
-	}
-	return 0;
-}
-early_param("mem", parse_mem);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	elfcorehdr_addr = memparse(arg, &arg);
-	return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif /* CONFIG_PROC_VMCORE */
-
-/*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
-static int __init parse_highmem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
-	return 0;
-}
-early_param("highmem", parse_highmem);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
-static int __init parse_vmalloc(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	__VMALLOC_RESERVE = memparse(arg, &arg);
-	return 0;
-}
-early_param("vmalloc", parse_vmalloc);
-
-/*
- * reservetop=size reserves a hole at the top of the kernel address space which
- * a hypervisor can load into later.  Needed for dynamically loaded hypervisors,
- * so relocating the fixmap can be done before paging initialization.
- */
-static int __init parse_reservetop(char *arg)
-{
-	unsigned long address;
-
-	if (!arg)
-		return -EINVAL;
-
-	address = memparse(arg, &arg);
-	reserve_top_address(address);
-	return 0;
-}
-early_param("reservetop", parse_reservetop);
-
-/*
- * Determine low and high memory ranges:
- */
-unsigned long __init find_max_low_pfn(void)
-{
-	unsigned long max_low_pfn;
-
-	max_low_pfn = max_pfn;
-	if (max_low_pfn > MAXMEM_PFN) {
-		if (highmem_pages == -1)
-			highmem_pages = max_pfn - MAXMEM_PFN;
-		if (highmem_pages + MAXMEM_PFN < max_pfn)
-			max_pfn = MAXMEM_PFN + highmem_pages;
-		if (highmem_pages + MAXMEM_PFN > max_pfn) {
-			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
-			highmem_pages = 0;
-		}
-		max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-		/* Maximum memory usable is what is directly addressable */
-		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-					MAXMEM>>20);
-		if (max_pfn > MAX_NONPAE_PFN)
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		else
-			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-		max_pfn = MAXMEM_PFN;
-#else /* !CONFIG_HIGHMEM */
-#ifndef CONFIG_HIGHMEM64G
-		if (max_pfn > MAX_NONPAE_PFN) {
-			max_pfn = MAX_NONPAE_PFN;
-			printk(KERN_WARNING "Warning only 4GB will be used.\n");
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		}
-#endif /* !CONFIG_HIGHMEM64G */
-#endif /* !CONFIG_HIGHMEM */
-	} else {
-		if (highmem_pages == -1)
-			highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
-		if (highmem_pages >= max_pfn) {
-			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
-			highmem_pages = 0;
-		}
-		if (highmem_pages) {
-			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
-				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
-				highmem_pages = 0;
-			}
-			max_low_pfn -= highmem_pages;
-		}
-#else
-		if (highmem_pages)
-			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
-#endif
-	}
-	return max_low_pfn;
-}
-
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int lowmem, ebda_addr;
-
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
-	if (paravirt_enabled())
-		return;
-
-	/* end of low (conventional) memory */
-	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
-	lowmem <<= 10;
-
-	/* start of EBDA area */
-	ebda_addr = get_bios_ebda();
-
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
-
-	/* reserve all memory between lowmem and the 1MB mark */
-	reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
-}
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-static void __init setup_bootmem_allocator(void);
-static unsigned long __init setup_memory(void)
-{
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	min_low_pfn = PFN_UP(init_pg_tables_end);
-
-	max_low_pfn = find_max_low_pfn();
-
-#ifdef CONFIG_HIGHMEM
-	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > max_low_pfn) {
-		highstart_pfn = max_low_pfn;
-	}
-	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-		pages_to_mb(highend_pfn - highstart_pfn));
-	num_physpages = highend_pfn;
-	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
-	num_physpages = max_low_pfn;
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-#ifdef CONFIG_FLATMEM
-	max_mapnr = num_physpages;
-#endif
-	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
-			pages_to_mb(max_low_pfn));
-
-	setup_bootmem_allocator();
-
-	return max_low_pfn;
-}
-
-static void __init zone_sizes_init(void)
-{
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] =
-		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-	add_active_range(0, 0, highend_pfn);
-#else
-	add_active_range(0, 0, max_low_pfn);
-#endif
-
-	free_area_init_nodes(max_zone_pfns);
-}
-#else
-extern unsigned long __init setup_memory(void);
-extern void zone_sizes_init(void);
-#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-
-static inline unsigned long long get_total_mem(void)
-{
-	unsigned long long total;
-
-	total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	total += highend_pfn - highstart_pfn;
-#endif
-
-	return total << PAGE_SHIFT;
-}
-
-#ifdef CONFIG_KEXEC
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = get_total_mem();
-
-	ret = parse_crashkernel(boot_command_line, total_mem,
-			&crash_size, &crash_base);
-	if (ret == 0 && crash_size > 0) {
-		if (crash_base > 0) {
-			printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-					"for crashkernel (System RAM: %ldMB)\n",
-					(unsigned long)(crash_size >> 20),
-					(unsigned long)(crash_base >> 20),
-					(unsigned long)(total_mem >> 20));
-
-			if (reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE) < 0) {
-				printk(KERN_INFO "crashkernel reservation "
-					"failed - memory is in use\n");
-				return;
-			}
-
-			crashk_res.start = crash_base;
-			crashk_res.end   = crash_base + crash_size - 1;
-		} else
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"you have to specify a base address\n");
-	}
-}
-#else
-static inline void __init reserve_crashkernel(void)
-{}
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-
-static bool do_relocate_initrd = false;
-
-static void __init reserve_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-
-	initrd_start = 0;
-
-	if (!boot_params.hdr.type_of_loader ||
-	    !ramdisk_image || !ramdisk_size)
-		return;		/* No initrd provided by bootloader */
-
-	if (ramdisk_end < ramdisk_image) {
-		printk(KERN_ERR "initrd wraps around end of memory, "
-		       "disabling initrd\n");
-		return;
-	}
-	if (ramdisk_size >= end_of_lowmem/2) {
-		printk(KERN_ERR "initrd too large to handle, "
-		       "disabling initrd\n");
-		return;
-	}
-	if (ramdisk_end <= end_of_lowmem) {
-		/* All in lowmem, easy case */
-		reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT);
-		initrd_start = ramdisk_image + PAGE_OFFSET;
-		initrd_end = initrd_start+ramdisk_size;
-		return;
-	}
-
-	/* We need to move the initrd down into lowmem */
-	ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK;
-
-	/* Note: this includes all the lowmem currently occupied by
-	   the initrd, we rely on that fact to keep the data intact. */
-	reserve_bootmem(ramdisk_here, ramdisk_size, BOOTMEM_DEFAULT);
-	initrd_start = ramdisk_here + PAGE_OFFSET;
-	initrd_end   = initrd_start + ramdisk_size;
-
-	do_relocate_initrd = true;
-}
-
-#define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
-
-static void __init relocate_initrd(void)
-{
-	unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-	unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-	unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
-	unsigned long ramdisk_here;
-	unsigned long slop, clen, mapaddr;
-	char *p, *q;
-
-	if (!do_relocate_initrd)
-		return;
-
-	ramdisk_here = initrd_start - PAGE_OFFSET;
-
-	q = (char *)initrd_start;
-
-	/* Copy any lowmem portion of the initrd */
-	if (ramdisk_image < end_of_lowmem) {
-		clen = end_of_lowmem - ramdisk_image;
-		p = (char *)__va(ramdisk_image);
-		memcpy(q, p, clen);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-
-	/* Copy the highmem portion of the initrd */
-	while (ramdisk_size) {
-		slop = ramdisk_image & ~PAGE_MASK;
-		clen = ramdisk_size;
-		if (clen > MAX_MAP_CHUNK-slop)
-			clen = MAX_MAP_CHUNK-slop;
-		mapaddr = ramdisk_image & PAGE_MASK;
-		p = early_ioremap(mapaddr, clen+slop);
-		memcpy(q, p+slop, clen);
-		early_iounmap(p, clen+slop);
-		q += clen;
-		ramdisk_image += clen;
-		ramdisk_size  -= clen;
-	}
-}
-
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-void __init setup_bootmem_allocator(void)
-{
-	unsigned long bootmap_size;
-	/*
-	 * Initialize the boot-time allocator (with low memory only):
-	 */
-	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
-	register_bootmem_low_pages(max_low_pfn);
-
-	/*
-	 * Reserve the bootmem bitmap itself as well. We do this in two
-	 * steps (first step was init_bootmem()) because this catches
-	 * the (very unlikely) case of us accidentally initializing the
-	 * bootmem allocator with an invalid RAM area.
-	 */
-	reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
-			 bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text),
-			 BOOTMEM_DEFAULT);
-
-	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
-	 */
-	reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
-
-	/* reserve EBDA region */
-	reserve_ebda_region();
-
-#ifdef CONFIG_SMP
-	/*
-	 * But first pinch a few for the stack/trampoline stuff
-	 * FIXME: Don't need the extra page at 4K, but need to fix
-	 * trampoline before removing it. (see the GDT stuff)
-	 */
-	reserve_bootmem(PAGE_SIZE, PAGE_SIZE, BOOTMEM_DEFAULT);
-#endif
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
-#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	reserve_initrd();
-#endif
-	numa_kva_reserve();
-	reserve_crashkernel();
-
-	reserve_ibft_region();
-}
-
-/*
- * The node 0 pgdat is initialized before all of these because
- * it's needed for bootmem.  node>0 pgdats have their virtual
- * space allocated before the pagetables are in place to access
- * them, so they can't be cleared then.
- *
- * This should all compile down to nothing when NUMA is off.
- */
-static void __init remapped_pgdat_init(void)
-{
-	int nid;
-
-	for_each_online_node(nid) {
-		if (nid != 0)
-			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-	}
-}
-
-#ifdef CONFIG_MCA
-static void set_mca_bus(int x)
-{
-	MCA_bus = x;
-}
-#else
-static void set_mca_bus(int x) { }
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
-	return machine_specific_memory_setup();
-}
-
-#ifdef CONFIG_NUMA
-/*
- * In the golden day, when everything among i386 and x86_64 will be
- * integrated, this will not live here
- */
-void *x86_cpu_to_node_map_early_ptr;
-int x86_cpu_to_node_map_init[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = NUMA_NO_NODE
-};
-DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
-#endif
-
-/*
- * Determine if we were loaded by an EFI loader.  If so, then we have also been
- * passed the efi memmap, systab, etc., so we should use these data structures
- * for initialization.  Note, the efi init code path is determined by the
- * global efi_enabled. This allows the same kernel image to be used on existing
- * systems (with a traditional BIOS) as well as on EFI systems.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned long max_low_pfn;
-
-	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
-	pre_setup_arch_hook();
-	early_cpu_init();
-	early_ioremap_init();
-
-#ifdef CONFIG_EFI
-	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
-		     "EL32", 4))
-		efi_enabled = 1;
-#endif
-
-	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
-	screen_info = boot_params.screen_info;
-	edid_info = boot_params.edid_info;
-	apm_info.bios = boot_params.apm_bios_info;
-	ist_info = boot_params.ist_info;
-	saved_video_mode = boot_params.hdr.vid_mode;
-	if( boot_params.sys_desc_table.length != 0 ) {
-		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
-		machine_id = boot_params.sys_desc_table.table[0];
-		machine_submodel_id = boot_params.sys_desc_table.table[1];
-		BIOS_revision = boot_params.sys_desc_table.table[2];
-	}
-	bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-	ARCH_SETUP
-
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-	print_memory_map(memory_setup());
-
-	copy_edd();
-
-	if (!boot_params.hdr.root_flags)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-
-	code_resource.start = virt_to_phys(_text);
-	code_resource.end = virt_to_phys(_etext)-1;
-	data_resource.start = virt_to_phys(_etext);
-	data_resource.end = virt_to_phys(_edata)-1;
-	bss_resource.start = virt_to_phys(&__bss_start);
-	bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-	parse_early_param();
-
-	if (user_defined_memmap) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		print_memory_map("user");
-	}
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	if (efi_enabled)
-		efi_init();
-
-	/* update e820 for memory not covered by WB MTRRs */
-	propagate_e820_map();
-	mtrr_bp_init();
-	if (mtrr_trim_uncached_memory(max_pfn))
-		propagate_e820_map();
-
-	max_low_pfn = setup_memory();
-
-#ifdef CONFIG_KVM_CLOCK
-	kvmclock_init();
-#endif
-
-#ifdef CONFIG_VMI
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-	kvm_guest_init();
-
-	/*
-	 * NOTE: before this point _nobody_ is allowed to allocate
-	 * any memory using the bootmem allocator.  Although the
-	 * allocator is now initialised only the first 8Mb of the kernel
-	 * virtual address space has been mapped.  All allocations before
-	 * paging_init() has completed must use the alloc_bootmem_low_pages()
-	 * variant (which allocates DMA'able memory) and care must be taken
-	 * not to exceed the 8Mb limit.
-	 */
-
-#ifdef CONFIG_SMP
-	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
-	paging_init();
-
-	/*
-	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
-	 */
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	if (init_ohci1394_dma_early)
-		init_ohci1394_dma_on_all_controllers();
-#endif
-
-	remapped_pgdat_init();
-	sparse_init();
-	zone_sizes_init();
-
-	/*
-	 * NOTE: at this point the bootmem allocator is fully available.
-	 */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	relocate_initrd();
-#endif
-
-	paravirt_post_allocator_init();
-
-	dmi_scan_machine();
-
-	io_delay_init();
-
-#ifdef CONFIG_X86_SMP
-	/*
-	 * setup to use the early static init tables during kernel startup
-	 * X86_SMP will exclude sub-arches that don't deal well with it.
-	 */
-	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
-	x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
-#endif
-#endif
-
-#ifdef CONFIG_X86_GENERICARCH
-	generic_apic_probe();
-#endif
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Parse the ACPI tables for possible boot-time SMP configuration.
-	 */
-	acpi_boot_table_init();
-#endif
-
-	early_quirks();
-
-#ifdef CONFIG_ACPI
-	acpi_boot_init();
-
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (smp_found_config)
-		get_smp_config();
-#endif
-
-	e820_register_memory();
-	e820_mark_nosave_regions();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
-		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-}
-
-/*
- * Request address space for all standard resources
- *
- * This is called just before pcibios_init(), which is also a
- * subsys_initcall, but is linked in later (in arch/i386/pci/common.c).
- */
-static int __init request_standard_resources(void)
-{
-	int i;
-
-	printk(KERN_INFO "Setting up standard PCI resources\n");
-	init_iomem_resources(&code_resource, &data_resource, &bss_resource);
-
-	request_resource(&iomem_resource, &video_ram_resource);
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-	return 0;
-}
-
-subsys_initcall(request_standard_resources);
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
deleted file mode 100644
index 6dff1286ad8a..000000000000
--- a/arch/x86/kernel/setup_64.c
+++ /dev/null
@@ -1,1194 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/processor.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/crash_dump.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-#include <asm/pci-direct.h>
-#include <linux/efi.h>
-#include <linux/acpi.h>
-#include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/mmzone.h>
-#include <linux/kexec.h>
-#include <linux/cpufreq.h>
-#include <linux/dmi.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <linux/sort.h>
-#include <linux/uaccess.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/vsyscall.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/msr.h>
-#include <asm/desc.h>
-#include <video/edid.h>
-#include <asm/e820.h>
-#include <asm/dma.h>
-#include <asm/gart.h>
-#include <asm/mpspec.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/numa.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-#include <asm/cacheflush.h>
-#include <asm/mce.h>
-#include <asm/ds.h>
-#include <asm/topology.h>
-#include <asm/trampoline.h>
-#include <asm/pat.h>
-
-#include <mach_apic.h>
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define ARCH_SETUP
-#endif
-
-/*
- * Machine setup..
- */
-
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-unsigned long mmu_cr4_features;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-unsigned long saved_video_mode;
-
-int force_mwait __cpuinitdata;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct sys_desc_table_struct {
-	unsigned short length;
-	unsigned char table[0];
-};
-
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-
-extern int root_mountflags;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-static struct resource standard_io_resources[] = {
-	{ .name = "dma1", .start = 0x00, .end = 0x1f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic1", .start = 0x20, .end = 0x21,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer0", .start = 0x40, .end = 0x43,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer1", .start = 0x50, .end = 0x53,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x60, .end = 0x60,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x64, .end = 0x64,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "fpu", .start = 0xf0, .end = 0xff,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
-};
-
-#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-
-static struct resource data_resource = {
-	.name = "Kernel data",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-static struct resource code_resource = {
-	.name = "Kernel code",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-static struct resource bss_resource = {
-	.name = "Kernel bss",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
-	char *end;
-	if (!arg)
-		return -EINVAL;
-	elfcorehdr_addr = memparse(arg, &end);
-	return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
-#ifndef CONFIG_NUMA
-static void __init
-contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
-{
-	unsigned long bootmap_size, bootmap;
-
-	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
-	bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
-				 PAGE_SIZE);
-	if (bootmap == -1L)
-		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
-	bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
-	e820_register_active_regions(0, start_pfn, end_pfn);
-	free_bootmem_with_active_regions(0, end_pfn);
-	early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
-	reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
-}
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
-	    sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
-     edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-#ifdef CONFIG_KEXEC
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
-
-	ret = parse_crashkernel(boot_command_line, total_mem,
-			&crash_size, &crash_base);
-	if (ret == 0 && crash_size) {
-		if (crash_base <= 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"you have to specify a base address\n");
-			return;
-		}
-
-		if (reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE) < 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"memory is in use\n");
-			return;
-		}
-
-		printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-				"for crashkernel (System RAM: %ldMB)\n",
-				(unsigned long)(crash_size >> 20),
-				(unsigned long)(crash_base >> 20),
-				(unsigned long)(total_mem >> 20));
-		crashk_res.start = crash_base;
-		crashk_res.end   = crash_base + crash_size - 1;
-		insert_resource(&iomem_resource, &crashk_res);
-	}
-}
-#else
-static inline void __init reserve_crashkernel(void)
-{}
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-void __attribute__((weak)) __init memory_setup(void)
-{
-       machine_specific_memory_setup();
-}
-
-static void __init parse_setup_data(void)
-{
-	struct setup_data *data;
-	unsigned long pa_data;
-
-	if (boot_params.hdr.version < 0x0209)
-		return;
-	pa_data = boot_params.hdr.setup_data;
-	while (pa_data) {
-		data = early_ioremap(pa_data, PAGE_SIZE);
-		switch (data->type) {
-		default:
-			break;
-		}
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
-		free_early(pa_data, pa_data+sizeof(*data)+data->len);
-#endif
-		pa_data = data->next;
-		early_iounmap(data, PAGE_SIZE);
-	}
-}
-
-#ifdef CONFIG_PCI_MMCONFIG
-extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
-#else
-void __cpuinit fam10h_check_enable_mmcfg(void)
-{
-}
-void __init check_enable_amd_mmconf_dmi(void)
-{
-}
-#endif
-
-/*
- * setup_arch - architecture-specific boot-time initializations
- *
- * Note: On x86_64, fixmaps are ready for use even before this is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned i;
-
-	printk(KERN_INFO "Command line: %s\n", boot_command_line);
-
-	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
-	screen_info = boot_params.screen_info;
-	edid_info = boot_params.edid_info;
-	saved_video_mode = boot_params.hdr.vid_mode;
-	bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-#ifdef CONFIG_EFI
-	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
-		     "EL64", 4))
-		efi_enabled = 1;
-#endif
-
-	ARCH_SETUP
-
-	memory_setup();
-	copy_edd();
-
-	if (!boot_params.hdr.root_flags)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) &_text;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_end;
-
-	code_resource.start = virt_to_phys(&_text);
-	code_resource.end = virt_to_phys(&_etext)-1;
-	data_resource.start = virt_to_phys(&_etext);
-	data_resource.end = virt_to_phys(&_edata)-1;
-	bss_resource.start = virt_to_phys(&__bss_start);
-	bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-	early_identify_cpu(&boot_cpu_data);
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	parse_setup_data();
-
-	parse_early_param();
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	if (init_ohci1394_dma_early)
-		init_ohci1394_dma_on_all_controllers();
-#endif
-
-	finish_e820_parsing();
-
-	/* after parse_early_param, so could debug it */
-	insert_resource(&iomem_resource, &code_resource);
-	insert_resource(&iomem_resource, &data_resource);
-	insert_resource(&iomem_resource, &bss_resource);
-
-	early_gart_iommu_check();
-
-	e820_register_active_regions(0, 0, -1UL);
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	end_pfn = e820_end_of_ram();
-	/* update e820 for memory not covered by WB MTRRs */
-	mtrr_bp_init();
-	if (mtrr_trim_uncached_memory(end_pfn)) {
-		e820_register_active_regions(0, 0, -1UL);
-		end_pfn = e820_end_of_ram();
-	}
-
-	num_physpages = end_pfn;
-
-	check_efer();
-
-	max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
-	if (efi_enabled)
-		efi_init();
-
-	vsmp_init();
-
-	dmi_scan_machine();
-
-	io_delay_init();
-
-#ifdef CONFIG_KVM_CLOCK
-	kvmclock_init();
-#endif
-
-#ifdef CONFIG_SMP
-	/* setup to use the early static init tables during kernel startup */
-	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
-	x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
-#endif
-#endif
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
-	 * Call this early for SRAT node setup.
-	 */
-	acpi_boot_table_init();
-#endif
-
-	/* How many end-of-memory variables you have, grandma! */
-	max_low_pfn = end_pfn;
-	max_pfn = end_pfn;
-	high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
-
-	/* Remove active ranges so rediscovery with NUMA-awareness happens */
-	remove_all_active_ranges();
-
-#ifdef CONFIG_ACPI_NUMA
-	/*
-	 * Parse SRAT to discover nodes.
-	 */
-	acpi_numa_init();
-#endif
-
-#ifdef CONFIG_NUMA
-	numa_initmem_init(0, end_pfn);
-#else
-	contig_initmem_init(0, end_pfn);
-#endif
-
-	dma32_reserve_bootmem();
-
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-       acpi_reserve_bootmem();
-#endif
-
-	if (efi_enabled)
-		efi_reserve_bootmem();
-
-       /*
-	* Find and reserve possible boot-time SMP configuration:
-	*/
-	find_smp_config();
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
-		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
-		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
-		unsigned long end_of_mem    = end_pfn << PAGE_SHIFT;
-
-		if (ramdisk_end <= end_of_mem) {
-			/*
-			 * don't need to reserve again, already reserved early
-			 * in x86_64_start_kernel, and early_res_to_bootmem
-			 * convert that to reserved in bootmem
-			 */
-			initrd_start = ramdisk_image + PAGE_OFFSET;
-			initrd_end = initrd_start+ramdisk_size;
-		} else {
-			free_bootmem(ramdisk_image, ramdisk_size);
-			printk(KERN_ERR "initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       ramdisk_end, end_of_mem);
-			initrd_start = 0;
-		}
-	}
-#endif
-	reserve_crashkernel();
-
-	reserve_ibft_region();
-
-	paging_init();
-	map_vsyscall();
-
-	early_quirks();
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC and some other early information from ACPI tables.
-	 */
-	acpi_boot_init();
-#endif
-
-	init_cpu_to_node();
-
-	/*
-	 * get boot-time SMP configuration:
-	 */
-	if (smp_found_config)
-		get_smp_config();
-	init_apic_mappings();
-	ioapic_init_mappings();
-
-	kvm_guest_init();
-
-	/*
-	 * We trust e820 completely. No explicit ROM probing in memory.
-	 */
-	e820_reserve_resources();
-	e820_mark_nosave_regions();
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-
-	e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
-		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-	/* do this before identify_cpu for boot cpu */
-	check_enable_amd_mmconf_dmi();
-}
-
-static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-
-	if (c->extended_cpuid_level < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-	return 1;
-}
-
-
-static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, eax, ebx, ecx, edx;
-
-	n = c->extended_cpuid_level;
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
-		       "D cache %dK (%d bytes/line)\n",
-		       edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size = (ecx>>24) + (edx>>24);
-		/* On K8 L1 TLB is inclusive, so don't count it */
-		c->x86_tlbsize = 0;
-	}
-
-	if (n >= 0x80000006) {
-		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
-		ecx = cpuid_ecx(0x80000006);
-		c->x86_cache_size = ecx >> 16;
-		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
-		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-		c->x86_cache_size, ecx & 0xFF);
-	}
-	if (n >= 0x80000008) {
-		cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-}
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-
-#endif
-}
-
-#define ENABLE_C1E_MASK		0x18000000
-#define CPUID_PROCESSOR_SIGNATURE	1
-#define CPUID_XFAM		0x0ff00000
-#define CPUID_XFAM_K8		0x00000000
-#define CPUID_XFAM_10H		0x00100000
-#define CPUID_XFAM_11H		0x00200000
-#define CPUID_XMOD		0x000f0000
-#define CPUID_XMOD_REV_F	0x00040000
-
-/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
-static __cpuinit int amd_apic_timer_broken(void)
-{
-	u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-
-	switch (eax & CPUID_XFAM) {
-	case CPUID_XFAM_K8:
-		if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
-			break;
-	case CPUID_XFAM_10H:
-	case CPUID_XFAM_11H:
-		rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
-		if (lo & ENABLE_C1E_MASK)
-			return 1;
-		break;
-	default:
-		/* err on the side of caution */
-		return 1;
-	}
-	return 0;
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
- 	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 15) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_cpu_cap(c, 0*32+31);
-
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	level = cpuid_eax(1);
-	if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) ||
-			     level >= 0x0f58))
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) {
-		case 15:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	/* MFENCE stops RDTSC speculation */
-	set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
-	if (c->x86 == 0x10)
-		fam10h_check_enable_mmcfg();
-
-	if (amd_apic_timer_broken())
-		disable_apic_timer = 1;
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) &&
-		(tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT)))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-	}
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	u32 eax, ebx, ecx, edx;
-	int index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
-	if (!cpu_has(c, X86_FEATURE_HT))
-		return;
-	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		goto out;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1) {
-
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of "
-			       "siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
-		}
-
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(index_msb);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings);
-
-		core_bits = get_count_order(c->x86_max_cores);
-
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-	}
-out:
-	if ((c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-		       c->cpu_core_id);
-	}
-
-#endif
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
-	unsigned int eax, t;
-
-	if (c->cpuid_level < 4)
-		return 1;
-
-	cpuid_count(4, 0, &eax, &t, &t, &t);
-
-	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
-	else
-		return 1;
-}
-
-static void __cpuinit srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
-	unsigned node;
-	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
-
-	/* Don't do the funky fallback heuristics the AMD version employs
-	   for now. */
-	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
-		node = first_node(node_online_map);
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
-	/* Cache sizes */
-	unsigned n;
-
-	init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9) {
-		unsigned eax = cpuid_eax(10);
-		/* Check for version and the number of counters */
-		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
-	}
-
-	if (cpu_has_ds) {
-		unsigned int l1, l2;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_cpu_cap(c, X86_FEATURE_BTS);
-		if (!(l1 & (1<<12)))
-			set_cpu_cap(c, X86_FEATURE_PEBS);
-	}
-
-
-	if (cpu_has_bts)
-		ds_init_intel(c);
-
-	n = c->extended_cpuid_level;
-	if (n >= 0x80000008) {
-		unsigned eax = cpuid_eax(0x80000008);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-		/* CPUID workaround for Intel 0F34 CPU */
-		if (c->x86_vendor == X86_VENDOR_INTEL &&
-		    c->x86 == 0xF && c->x86_model == 0x3 &&
-		    c->x86_mask == 0x4)
-			c->x86_phys_bits = 36;
-	}
-
-	if (c->x86 == 15)
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if (c->x86 == 6)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	c->x86_max_cores = intel_num_cpu_cores(c);
-
-	srat_detect_node();
-}
-
-static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
-{
-	if (c->x86 == 0x6 && c->x86_model >= 0xf)
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
-{
-	/* Cache sizes */
-	unsigned n;
-
-	n = c->extended_cpuid_level;
-	if (n >= 0x80000008) {
-		unsigned eax = cpuid_eax(0x80000008);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-
-	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-
-	if (!strcmp(v, "AuthenticAMD"))
-		c->x86_vendor = X86_VENDOR_AMD;
-	else if (!strcmp(v, "GenuineIntel"))
-		c->x86_vendor = X86_VENDOR_INTEL;
-	else if (!strcmp(v, "CentaurHauls"))
-		c->x86_vendor = X86_VENDOR_CENTAUR;
-	else
-		c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
-   needed before check_bugs. Everything advanced is in identify_cpu
-   below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
-	u32 tfms, xlvl;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 64;
-	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_max_cores = 1;
-	c->x86_coreid_bits = 0;
-	c->extended_cpuid_level = 0;
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	/* Get vendor name */
-	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-	      (unsigned int *)&c->x86_vendor_id[0],
-	      (unsigned int *)&c->x86_vendor_id[8],
-	      (unsigned int *)&c->x86_vendor_id[4]);
-
-	get_cpu_vendor(c);
-
-	/* Initialize the standard set of capabilities */
-	/* Note that the vendor-specific code below might override */
-
-	/* Intel-defined flags: level 0x00000001 */
-	if (c->cpuid_level >= 0x00000001) {
-		__u32 misc;
-		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
-		      &c->x86_capability[0]);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
-			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-	} else {
-		/* Have CPUID level 0 only - unheard of */
-		c->x86 = 4;
-	}
-
-	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
-	c->phys_proc_id = c->initial_apicid;
-#endif
-	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
-		}
-		if (xlvl >= 0x80000004)
-			get_model_name(c); /* Default name */
-	}
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		/* Don't set x86_cpuid_level here for now to not confuse. */
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-
-	c->extended_cpuid_level = cpuid_eax(0x80000000);
-	if (c->extended_cpuid_level >= 0x80000007)
-		c->x86_power = cpuid_edx(0x80000007);
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		early_init_amd(c);
-		break;
-	case X86_VENDOR_INTEL:
-		early_init_intel(c);
-		break;
-	case X86_VENDOR_CENTAUR:
-		early_init_centaur(c);
-		break;
-	}
-
-	validate_pat_support(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
-
-	early_identify_cpu(c);
-
-	init_scattered_cpuid_features(c);
-
-	c->apicid = phys_pkg_id(0);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		init_amd(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		init_intel(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		init_centaur(c);
-		break;
-
-	case X86_VENDOR_UNKNOWN:
-	default:
-		display_cacheinfo(c);
-		break;
-	}
-
-	detect_ht(c);
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if (c != &boot_cpu_data) {
-		/* AND the already accumulated flags with these */
-		for (i = 0; i < NCAPINTS; i++)
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-	/* Clear all flags overriden by options */
-	for (i = 0; i < NCAPINTS; i++)
-		c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
-	mcheck_init(c);
-#endif
-	select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
-	numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
-	identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
-	BUG_ON(c == &boot_cpu_data);
-	identify_cpu(c);
-	mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
-	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT " stepping %02x\n", c->x86_mask);
-	else
-		printk(KERN_CONT "\n");
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
-	int bit;
-	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
-		setup_clear_cpu_cap(bit);
-	else
-		return 0;
-	return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
new file mode 100644
index 000000000000..cac68430d31f
--- /dev/null
+++ b/arch/x86/kernel/setup_percpu.c
@@ -0,0 +1,399 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/percpu.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/topology.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/highmem.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+unsigned int num_processors;
+unsigned disabled_cpus __cpuinitdata;
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int max_physical_apicid;
+EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+#endif
+
+/* map cpu index to physical APIC ID */
+DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+#define	X86_64_NUMA	1
+
+/* map cpu index to node index */
+DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
+
+/* which logical CPUs are on which nodes */
+cpumask_t *node_to_cpumask_map;
+EXPORT_SYMBOL(node_to_cpumask_map);
+
+/* setup node_to_cpumask_map */
+static void __init setup_node_to_cpumask_map(void);
+
+#else
+static inline void setup_node_to_cpumask_map(void) { }
+#endif
+
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
+/*
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas.  These arrays then become expendable and the
+ * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ */
+static void __init setup_per_cpu_maps(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		per_cpu(x86_cpu_to_apicid, cpu) =
+				early_per_cpu_map(x86_cpu_to_apicid, cpu);
+		per_cpu(x86_bios_cpu_apicid, cpu) =
+				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+#ifdef X86_64_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
+	}
+
+	/* indicate the early static arrays will soon be gone */
+	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
+	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
+#ifdef X86_64_NUMA
+	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
+#endif
+}
+
+#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
+cpumask_t *cpumask_of_cpu_map __read_mostly;
+EXPORT_SYMBOL(cpumask_of_cpu_map);
+
+/* requires nr_cpu_ids to be initialized */
+static void __init setup_cpumask_of_cpu(void)
+{
+	int i;
+
+	/* alloc_bootmem zeroes memory */
+	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
+	for (i = 0; i < nr_cpu_ids; i++)
+		cpu_set(i, cpumask_of_cpu_map[i]);
+}
+#else
+static inline void setup_cpumask_of_cpu(void) { }
+#endif
+
+#ifdef CONFIG_X86_32
+/*
+ * Great future not-so-futuristic plan: make i386 and x86_64 do it
+ * the same way
+ */
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+static inline void setup_cpu_pda_map(void) { }
+
+#elif !defined(CONFIG_SMP)
+static inline void setup_cpu_pda_map(void) { }
+
+#else /* CONFIG_SMP && CONFIG_X86_64 */
+
+/*
+ * Allocate cpu_pda pointer table and array via alloc_bootmem.
+ */
+static void __init setup_cpu_pda_map(void)
+{
+	char *pda;
+	struct x8664_pda **new_cpu_pda;
+	unsigned long size;
+	int cpu;
+
+	size = roundup(sizeof(struct x8664_pda), cache_line_size());
+
+	/* allocate cpu_pda array and pointer table */
+	{
+		unsigned long tsize = nr_cpu_ids * sizeof(void *);
+		unsigned long asize = size * (nr_cpu_ids - 1);
+
+		tsize = roundup(tsize, cache_line_size());
+		new_cpu_pda = alloc_bootmem(tsize + asize);
+		pda = (char *)new_cpu_pda + tsize;
+	}
+
+	/* initialize pointer table to static pda's */
+	for_each_possible_cpu(cpu) {
+		if (cpu == 0) {
+			/* leave boot cpu pda in place */
+			new_cpu_pda[0] = cpu_pda(0);
+			continue;
+		}
+		new_cpu_pda[cpu] = (struct x8664_pda *)pda;
+		new_cpu_pda[cpu]->in_bootmem = 1;
+		pda += size;
+	}
+
+	/* point to new pointer table */
+	_cpu_pda = new_cpu_pda;
+}
+#endif
+
+/*
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
+ */
+void __init setup_per_cpu_areas(void)
+{
+	ssize_t size = PERCPU_ENOUGH_ROOM;
+	char *ptr;
+	int cpu;
+
+	/* Setup cpu_pda map */
+	setup_cpu_pda_map();
+
+	/* Copy section for each CPU (we discard the original) */
+	size = PERCPU_ENOUGH_ROOM;
+	printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
+			  size);
+
+	for_each_possible_cpu(cpu) {
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+		ptr = alloc_bootmem_pages(size);
+#else
+		int node = early_cpu_to_node(cpu);
+		if (!node_online(node) || !NODE_DATA(node)) {
+			ptr = alloc_bootmem_pages(size);
+			printk(KERN_INFO
+			       "cpu %d has no node %d or node-local memory\n",
+				cpu, node);
+		}
+		else
+			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
+		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+	}
+
+	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
+		NR_CPUS, nr_cpu_ids, nr_node_ids);
+
+	/* Setup percpu data maps */
+	setup_per_cpu_maps();
+
+	/* Setup node to cpumask map */
+	setup_node_to_cpumask_map();
+
+	/* Setup cpumask_of_cpu map */
+	setup_cpumask_of_cpu();
+}
+
+#endif
+
+#ifdef X86_64_NUMA
+
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: node_to_cpumask() is not valid until after this is done.
+ */
+static void __init setup_node_to_cpumask_map(void)
+{
+	unsigned int node, num = 0;
+	cpumask_t *map;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES) {
+		for_each_node_mask(node, node_possible_map)
+			num = node;
+		nr_node_ids = num + 1;
+	}
+
+	/* allocate the map */
+	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
+
+	Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+		map, nr_node_ids);
+
+	/* node_to_cpumask() will now work */
+	node_to_cpumask_map = map;
+}
+
+void __cpuinit numa_set_node(int cpu, int node)
+{
+	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
+
+	if (cpu_pda(cpu) && node != NUMA_NO_NODE)
+		cpu_pda(cpu)->nodenumber = node;
+
+	if (cpu_to_node_map)
+		cpu_to_node_map[cpu] = node;
+
+	else if (per_cpu_offset(cpu))
+		per_cpu(x86_cpu_to_node_map, cpu) = node;
+
+	else
+		Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+}
+
+void __cpuinit numa_clear_node(int cpu)
+{
+	numa_set_node(cpu, NUMA_NO_NODE);
+}
+
+#ifndef CONFIG_DEBUG_PER_CPU_MAPS
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
+}
+
+#else /* CONFIG_DEBUG_PER_CPU_MAPS */
+
+/*
+ * --------- debug versions of the numa functions ---------
+ */
+static void __cpuinit numa_set_cpumask(int cpu, int enable)
+{
+	int node = cpu_to_node(cpu);
+	cpumask_t *mask;
+	char buf[64];
+
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_ERR "node_to_cpumask_map NULL\n");
+		dump_stack();
+		return;
+	}
+
+	mask = &node_to_cpumask_map[node];
+	if (enable)
+		cpu_set(cpu, *mask);
+	else
+		cpu_clear(cpu, *mask);
+
+	cpulist_scnprintf(buf, sizeof(buf), *mask);
+	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
+		enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf);
+ }
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 1);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 0);
+}
+
+int cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
+		printk(KERN_WARNING
+			"cpu_to_node(%d): usage too early!\n", cpu);
+		dump_stack();
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+EXPORT_SYMBOL(cpu_to_node);
+
+/*
+ * Same function as cpu_to_node() but used if called before the
+ * per_cpu areas are setup.
+ */
+int early_cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map))
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+	if (!per_cpu_offset(cpu)) {
+		printk(KERN_WARNING
+			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
+		dump_stack();
+		return NUMA_NO_NODE;
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+
+/* empty cpumask */
+static const cpumask_t cpu_mask_none;
+
+/*
+ * Returns a pointer to the bitmask of CPUs on Node 'node'.
+ */
+const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n",
+			node);
+		dump_stack();
+		return (const cpumask_t *)&cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"_node_to_cpumask_ptr(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return &cpu_mask_none;
+	}
+	return &node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(_node_to_cpumask_ptr);
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used.  The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+cpumask_t node_to_cpumask(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
+		dump_stack();
+		return cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return cpu_mask_none;
+	}
+	return node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(node_to_cpumask);
+
+/*
+ * --------- end of debug versions of the numa functions ---------
+ */
+
+#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
+
+#endif /* X86_64_NUMA */
+
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3e1cecedde42..f35c2d8016ac 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -59,7 +59,6 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mtrr.h>
-#include <asm/nmi.h>
 #include <asm/vmi.h>
 #include <asm/genapic.h>
 #include <linux/mc146818rtc.h>
@@ -68,22 +67,6 @@
 #include <mach_wakecpu.h>
 #include <smpboot_hooks.h>
 
-/*
- * FIXME: For x86_64, those are defined in other files. But moving them here,
- * would make the setup areas dependent on smp, which is a loss. When we
- * integrate apic between arches, we can probably do a better job, but
- * right now, they'll stay here -- glommer
- */
-
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
-			{ [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-
-u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
-				= { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_bios_cpu_apicid_early_ptr;
-
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
 static int low_mappings;
@@ -198,13 +181,12 @@ static void map_cpu_to_logical_apicid(void)
 	map_cpu_to_node(cpu, node);
 }
 
-static void unmap_cpu_to_logical_apicid(int cpu)
+void numa_remove_cpu(int cpu)
 {
 	cpu_2_logical_apicid[cpu] = BAD_APICID;
 	unmap_cpu_to_node(cpu);
 }
 #else
-#define unmap_cpu_to_logical_apicid(cpu) do {} while (0)
 #define map_cpu_to_logical_apicid()  do {} while (0)
 #endif
 
@@ -346,15 +328,8 @@ static void __cpuinit start_secondary(void *unused)
 	 * smp_call_function().
 	 */
 	lock_ipi_call_lock();
-#ifdef CONFIG_X86_64
-	spin_lock(&vector_lock);
-
-	/* Setup the per cpu irq handling data structures */
-	__setup_vector_irq(smp_processor_id());
-	/*
-	 * Allow the master to continue.
-	 */
-	spin_unlock(&vector_lock);
+#ifdef CONFIG_X86_IO_APIC
+	setup_vector_irq(smp_processor_id());
 #endif
 	cpu_set(smp_processor_id(), cpu_online_map);
 	unlock_ipi_call_lock();
@@ -366,31 +341,8 @@ static void __cpuinit start_secondary(void *unused)
 	cpu_idle();
 }
 
-#ifdef CONFIG_X86_32
-/*
- * Everything has been set up for the secondary
- * CPUs - they just need to reload everything
- * from the task structure
- * This function must not return.
- */
-void __devinit initialize_secondary(void)
-{
-	/*
-	 * We don't actually need to load the full TSS,
-	 * basically just the stack pointer and the ip.
-	 */
-
-	asm volatile(
-		"movl %0,%%esp\n\t"
-		"jmp *%1"
-		:
-		:"m" (current->thread.sp), "m" (current->thread.ip));
-}
-#endif
-
 static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_32
 	/*
 	 * Mask B, Pentium, but not Pentium MMX
 	 */
@@ -440,7 +392,6 @@ static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
 
 valid_k7:
 	;
-#endif
 }
 
 static void __cpuinit smp_checks(void)
@@ -555,23 +506,6 @@ cpumask_t cpu_coregroup_map(int cpu)
 		return c->llc_shared_map;
 }
 
-#ifdef CONFIG_X86_32
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
-	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
-	/*
-	 * Has to be in very low memory so we can execute
-	 * real-mode AP code.
-	 */
-	if (__pa(trampoline_base) >= 0x9F000)
-		BUG();
-}
-#endif
-
 static void impress_friends(void)
 {
 	int cpu;
@@ -748,11 +682,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	 * target processor state.
 	 */
 	startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
-#ifdef CONFIG_X86_64
-			 (unsigned long)init_rsp);
-#else
 			 (unsigned long)stack_start.sp);
-#endif
 
 	/*
 	 * Run STARTUP IPI loop.
@@ -832,6 +762,45 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 	complete(&c_idle->done);
 }
 
+#ifdef CONFIG_X86_64
+/*
+ * Allocate node local memory for the AP pda.
+ *
+ * Must be called after the _cpu_pda pointer table is initialized.
+ */
+static int __cpuinit get_local_pda(int cpu)
+{
+	struct x8664_pda *oldpda, *newpda;
+	unsigned long size = sizeof(struct x8664_pda);
+	int node = cpu_to_node(cpu);
+
+	if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem)
+		return 0;
+
+	oldpda = cpu_pda(cpu);
+	newpda = kmalloc_node(size, GFP_ATOMIC, node);
+	if (!newpda) {
+		printk(KERN_ERR "Could not allocate node local PDA "
+			"for CPU %d on node %d\n", cpu, node);
+
+		if (oldpda)
+			return 0;	/* have a usable pda */
+		else
+			return -1;
+	}
+
+	if (oldpda) {
+		memcpy(newpda, oldpda, size);
+		if (!after_bootmem)
+			free_bootmem((unsigned long)oldpda, size);
+	}
+
+	newpda->in_bootmem = 0;
+	cpu_pda(cpu) = newpda;
+	return 0;
+}
+#endif /* CONFIG_X86_64 */
+
 static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
@@ -848,28 +817,14 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
 	INIT_WORK(&c_idle.work, do_fork_idle);
-#ifdef CONFIG_X86_64
-	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
-	if (!cpu_gdt_descr[cpu].address &&
-		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
-		return -1;
-	}
 
+#ifdef CONFIG_X86_64
 	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof(struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
+	if (cpu > 0) {
+		boot_error = get_local_pda(cpu);
+		if (boot_error)
+			goto restore_state;
+			/* if can't get pda memory, can't start cpu */
 	}
 #endif
 
@@ -905,18 +860,15 @@ do_rest:
 #ifdef CONFIG_X86_32
 	per_cpu(current_task, cpu) = c_idle.idle;
 	init_gdt(cpu);
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
-	c_idle.idle->thread.ip = (unsigned long) start_secondary;
 	/* Stack for startup_32 can be just as for start_secondary onwards */
-	stack_start.sp = (void *) c_idle.idle->thread.sp;
 	irq_ctx_init(cpu);
 #else
 	cpu_pda(cpu)->pcurrent = c_idle.idle;
-	init_rsp = c_idle.idle->thread.sp;
-	load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
-	initial_code = (unsigned long)start_secondary;
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
 #endif
+	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
+	initial_code = (unsigned long)start_secondary;
+	stack_start.sp = (void *) c_idle.idle->thread.sp;
 
 	/* start_ip had better be page-aligned! */
 	start_ip = setup_trampoline();
@@ -987,13 +939,12 @@ do_rest:
 				inquire_remote_apic(apicid);
 		}
 	}
-
-	if (boot_error) {
-		/* Try to put things back the way they were before ... */
-		unmap_cpu_to_logical_apicid(cpu);
 #ifdef CONFIG_X86_64
-		clear_node_cpumask(cpu); /* was set by numa_add_cpu */
+restore_state:
 #endif
+	if (boot_error) {
+		/* Try to put things back the way they were before ... */
+		numa_remove_cpu(cpu); /* was set by numa_add_cpu */
 		cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
 		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
 		cpu_clear(cpu, cpu_present_map);
@@ -1087,14 +1038,12 @@ static __init void disable_smp(void)
 {
 	cpu_present_map = cpumask_of_cpu(0);
 	cpu_possible_map = cpumask_of_cpu(0);
-#ifdef CONFIG_X86_32
 	smpboot_clear_io_apic_irqs();
-#endif
+
 	if (smp_found_config)
-		phys_cpu_present_map =
-				physid_mask_of_physid(boot_cpu_physical_apicid);
+		physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
+		physid_set_mask_of_physid(0, &phys_cpu_present_map);
 	map_cpu_to_logical_apicid();
 	cpu_set(0, per_cpu(cpu_sibling_map, 0));
 	cpu_set(0, per_cpu(cpu_core_map, 0));
@@ -1157,12 +1106,12 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	 * If SMP should be disabled, then really disable it!
 	 */
 	if (!max_cpus) {
-		printk(KERN_INFO "SMP mode deactivated,"
-				 "forcing use of dummy APIC emulation.\n");
+		printk(KERN_INFO "SMP mode deactivated.\n");
 		smpboot_clear_io_apic();
-#ifdef CONFIG_X86_32
+
+		localise_nmi_watchdog();
+
 		connect_bsp_APIC();
-#endif
 		setup_local_APIC();
 		end_local_APIC_setup();
 		return -1;
@@ -1190,7 +1139,6 @@ static void __init smp_cpu_index_default(void)
 void __init native_smp_prepare_cpus(unsigned int max_cpus)
 {
 	preempt_disable();
-	nmi_watchdog_default();
 	smp_cpu_index_default();
 	current_cpu_data = boot_cpu_data;
 	cpu_callin_map = cpumask_of_cpu(0);
@@ -1217,9 +1165,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	}
 	preempt_enable();
 
-#ifdef CONFIG_X86_32
 	connect_bsp_APIC();
-#endif
+
 	/*
 	 * Switch from PIC to APIC mode.
 	 */
@@ -1257,8 +1204,8 @@ void __init native_smp_prepare_boot_cpu(void)
 	int me = smp_processor_id();
 #ifdef CONFIG_X86_32
 	init_gdt(me);
-	switch_to_new_gdt();
 #endif
+	switch_to_new_gdt();
 	/* already set me in cpu_online_map in boot_cpu_init() */
 	cpu_set(me, cpu_callout_map);
 	per_cpu(cpu_state, me) = CPU_ONLINE;
@@ -1278,23 +1225,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-#  ifdef CONFIG_X86_32
-void cpu_exit_clear(void)
-{
-	int cpu = raw_smp_processor_id();
-
-	idle_task_exit();
-
-	cpu_uninit();
-	irq_ctx_exit(cpu);
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-
-	unmap_cpu_to_logical_apicid(cpu);
-}
-#  endif /* CONFIG_X86_32 */
-
 static void remove_siblinginfo(int cpu)
 {
 	int sibling;
@@ -1348,12 +1278,20 @@ __init void prefill_possible_map(void)
 	int i;
 	int possible;
 
+	/* no processor from mptable or madt */
+	if (!num_processors)
+		num_processors = 1;
+
+#ifdef CONFIG_HOTPLUG_CPU
 	if (additional_cpus == -1) {
 		if (disabled_cpus > 0)
 			additional_cpus = disabled_cpus;
 		else
 			additional_cpus = 0;
 	}
+#else
+	additional_cpus = 0;
+#endif
 	possible = num_processors + additional_cpus;
 	if (possible > NR_CPUS)
 		possible = NR_CPUS;
@@ -1363,18 +1301,18 @@ __init void prefill_possible_map(void)
 
 	for (i = 0; i < possible; i++)
 		cpu_set(i, cpu_possible_map);
+
+	nr_cpu_ids = possible;
 }
 
 static void __ref remove_cpu_from_maps(int cpu)
 {
 	cpu_clear(cpu, cpu_online_map);
-#ifdef CONFIG_X86_64
 	cpu_clear(cpu, cpu_callout_map);
 	cpu_clear(cpu, cpu_callin_map);
 	/* was set by cpu_init() */
 	clear_bit(cpu, (unsigned long *)&cpu_initialized);
-	clear_node_cpumask(cpu);
-#endif
+	numa_remove_cpu(cpu);
 }
 
 int __cpu_disable(void)
diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c
deleted file mode 100644
index 70e4a374b4e8..000000000000
--- a/arch/x86/kernel/srat_32.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit 
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.          
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/mmzone.h>
-#include <linux/acpi.h>
-#include <linux/nodemask.h>
-#include <asm/srat.h>
-#include <asm/topology.h>
-#include <asm/smp.h>
-
-/*
- * proximity macros and definitions
- */
-#define NODE_ARRAY_INDEX(x)	((x) / 8)	/* 8 bits/char */
-#define NODE_ARRAY_OFFSET(x)	((x) % 8)	/* 8 bits/char */
-#define BMAP_SET(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
-#define BMAP_TEST(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
-/* bitmap length; _PXM is at most 255 */
-#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) 
-static u8 pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
-
-#define MAX_CHUNKS_PER_NODE	3
-#define MAXCHUNKS		(MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
-struct node_memory_chunk_s {
-	unsigned long	start_pfn;
-	unsigned long	end_pfn;
-	u8	pxm;		// proximity domain of node
-	u8	nid;		// which cnode contains this chunk?
-	u8	bank;		// which mem bank on this node
-};
-static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
-
-static int num_memory_chunks;		/* total number of memory chunks */
-static u8 __initdata apicid_to_pxm[MAX_APICID];
-
-/* Identify CPU proximity domains */
-static void __init parse_cpu_affinity_structure(char *p)
-{
-	struct acpi_srat_cpu_affinity *cpu_affinity =
-				(struct acpi_srat_cpu_affinity *) p;
-
-	if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
-		return;		/* empty entry */
-
-	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
-
-	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
-
-	printk("CPU 0x%02X in proximity domain 0x%02X\n",
-		cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
-}
-
-/*
- * Identify memory proximity domains and hot-remove capabilities.
- * Fill node memory chunk list structure.
- */
-static void __init parse_memory_affinity_structure (char *sratp)
-{
-	unsigned long long paddr, size;
-	unsigned long start_pfn, end_pfn;
-	u8 pxm;
-	struct node_memory_chunk_s *p, *q, *pend;
-	struct acpi_srat_mem_affinity *memory_affinity =
-			(struct acpi_srat_mem_affinity *) sratp;
-
-	if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
-		return;		/* empty entry */
-
-	pxm = memory_affinity->proximity_domain & 0xff;
-
-	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, pxm);
-
-	/* calculate info for memory chunk structure */
-	paddr = memory_affinity->base_address;
-	size = memory_affinity->length;
-
-	start_pfn = paddr >> PAGE_SHIFT;
-	end_pfn = (paddr + size) >> PAGE_SHIFT;
-
-
-	if (num_memory_chunks >= MAXCHUNKS) {
-		printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
-			size/(1024*1024), paddr);
-		return;
-	}
-
-	/* Insertion sort based on base address */
-	pend = &node_memory_chunk[num_memory_chunks];
-	for (p = &node_memory_chunk[0]; p < pend; p++) {
-		if (start_pfn < p->start_pfn)
-			break;
-	}
-	if (p < pend) {
-		for (q = pend; q >= p; q--)
-			*(q + 1) = *q;
-	}
-	p->start_pfn = start_pfn;
-	p->end_pfn = end_pfn;
-	p->pxm = pxm;
-
-	num_memory_chunks++;
-
-	printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
-		start_pfn, end_pfn,
-		memory_affinity->memory_type,
-		pxm,
-		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
-		 "enabled and removable" : "enabled" ) );
-}
-
-/*
- * The SRAT table always lists ascending addresses, so can always
- * assume that the first "start" address that you see is the real
- * start of the node, and that the current "end" address is after
- * the previous one.
- */
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
-{
-	/*
-	 * Only add present memory as told by the e820.
-	 * There is no guarantee from the SRAT that the memory it
-	 * enumerates is present at boot time because it represents
-	 * *possible* memory hotplug areas the same as normal RAM.
-	 */
-	if (memory_chunk->start_pfn >= max_pfn) {
-		printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n",
-			memory_chunk->start_pfn, memory_chunk->end_pfn);
-		return;
-	}
-	if (memory_chunk->nid != nid)
-		return;
-
-	if (!node_has_online_mem(nid))
-		node_start_pfn[nid] = memory_chunk->start_pfn;
-
-	if (node_start_pfn[nid] > memory_chunk->start_pfn)
-		node_start_pfn[nid] = memory_chunk->start_pfn;
-
-	if (node_end_pfn[nid] < memory_chunk->end_pfn)
-		node_end_pfn[nid] = memory_chunk->end_pfn;
-}
-
-/* Parse the ACPI Static Resource Affinity Table */
-static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
-{
-	u8 *start, *end, *p;
-	int i, j, nid;
-
-	start = (u8 *)(&(sratp->reserved) + 1);	/* skip header */
-	p = start;
-	end = (u8 *)sratp + sratp->header.length;
-
-	memset(pxm_bitmap, 0, sizeof(pxm_bitmap));	/* init proximity domain bitmap */
-	memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
-
-	num_memory_chunks = 0;
-	while (p < end) {
-		switch (*p) {
-		case ACPI_SRAT_TYPE_CPU_AFFINITY:
-			parse_cpu_affinity_structure(p);
-			break;
-		case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
-			parse_memory_affinity_structure(p);
-			break;
-		default:
-			printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]);
-			break;
-		}
-		p += p[1];
-		if (p[1] == 0) {
-			printk("acpi20_parse_srat: Entry length value is zero;"
-				" can't parse any further!\n");
-			break;
-		}
-	}
-
-	if (num_memory_chunks == 0) {
-		printk("could not finy any ACPI SRAT memory areas.\n");
-		goto out_fail;
-	}
-
-	/* Calculate total number of nodes in system from PXM bitmap and create
-	 * a set of sequential node IDs starting at zero.  (ACPI doesn't seem
-	 * to specify the range of _PXM values.)
-	 */
-	/*
-	 * MCD - we no longer HAVE to number nodes sequentially.  PXM domain
-	 * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
-	 * 32, so we will continue numbering them in this manner until MAX_NUMNODES
-	 * approaches MAX_PXM_DOMAINS for i386.
-	 */
-	nodes_clear(node_online_map);
-	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
-		if (BMAP_TEST(pxm_bitmap, i)) {
-			int nid = acpi_map_pxm_to_node(i);
-			node_set_online(nid);
-		}
-	}
-	BUG_ON(num_online_nodes() == 0);
-
-	/* set cnode id in memory chunk structure */
-	for (i = 0; i < num_memory_chunks; i++)
-		node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
-
-	printk("pxm bitmap: ");
-	for (i = 0; i < sizeof(pxm_bitmap); i++) {
-		printk("%02X ", pxm_bitmap[i]);
-	}
-	printk("\n");
-	printk("Number of logical nodes in system = %d\n", num_online_nodes());
-	printk("Number of memory chunks in system = %d\n", num_memory_chunks);
-
-	for (i = 0; i < MAX_APICID; i++)
-		apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);
-
-	for (j = 0; j < num_memory_chunks; j++){
-		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
-		printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
-		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
-		node_read_chunk(chunk->nid, chunk);
-		add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
-	}
- 
-	for_each_online_node(nid) {
-		unsigned long start = node_start_pfn[nid];
-		unsigned long end = node_end_pfn[nid];
-
-		memory_present(nid, start, end);
-		node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
-	}
-	return 1;
-out_fail:
-	return 0;
-}
-
-struct acpi_static_rsdt {
-	struct acpi_table_rsdt table;
-	u32 padding[7]; /* Allow for 7 more table entries */
-};
-
-int __init get_memcfg_from_srat(void)
-{
-	struct acpi_table_header *header = NULL;
-	struct acpi_table_rsdp *rsdp = NULL;
-	struct acpi_table_rsdt *rsdt = NULL;
-	acpi_native_uint rsdp_address = 0;
-	struct acpi_static_rsdt saved_rsdt;
-	int tables = 0;
-	int i = 0;
-
-	rsdp_address = acpi_os_get_root_pointer();
-	if (!rsdp_address) {
-		printk("%s: System description tables not found\n",
-		       __func__);
-		goto out_err;
-	}
-
-	printk("%s: assigning address to rsdp\n", __func__);
-	rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
-	if (!rsdp) {
-		printk("%s: Didn't find ACPI root!\n", __func__);
-		goto out_err;
-	}
-
-	printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
-		rsdp->oem_id);
-
-	if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
-		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__);
-		goto out_err;
-	}
-
-	rsdt = (struct acpi_table_rsdt *)
-	    early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt));
-
-	if (!rsdt) {
-		printk(KERN_WARNING
-		       "%s: ACPI: Invalid root system description tables (RSDT)\n",
-		       __func__);
-		goto out_err;
-	}
-
-	header = &rsdt->header;
-
-	if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) {
-		printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
-		goto out_err;
-	}
-
-	/* 
-	 * The number of tables is computed by taking the 
-	 * size of all entries (header size minus total 
-	 * size of RSDT) divided by the size of each entry
-	 * (4-byte table pointers).
-	 */
-	tables = (header->length - sizeof(struct acpi_table_header)) / 4;
-
-	if (!tables)
-		goto out_err;
-
-	memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
-
-	if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) {
-		printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
-		       saved_rsdt.table.header.length);
-		goto out_err;
-	}
-
-	printk("Begin SRAT table scan....\n");
-
-	for (i = 0; i < tables; i++) {
-		/* Map in header, then map in full table length. */
-		header = (struct acpi_table_header *)
-			early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header));
-		if (!header)
-			break;
-		header = (struct acpi_table_header *)
-			early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length);
-		if (!header)
-			break;
-
-		if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4))
-			continue;
-
-		/* we've found the srat table. don't need to look at any more tables */
-		return acpi20_parse_srat((struct acpi_table_srat *)header);
-	}
-out_err:
-	remove_all_active_ranges();
-	printk("failed to get NUMA memory information from SRAT table\n");
-	return 0;
-}
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index ae751094eba9..d67ce5f044ba 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index d2ab52cc1d6b..7066cb855a60 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -19,8 +19,8 @@
 #include <linux/utsname.h>
 #include <linux/ipc.h>
 
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
 
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
@@ -103,7 +103,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg)
  *
  * This is really horribly ugly.
  */
-asmlinkage int sys_ipc (uint call, int first, int second,
+asmlinkage int sys_ipc(uint call, int first, int second,
 			int third, void __user *ptr, long fifth)
 {
 	int version, ret;
@@ -113,24 +113,24 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 
 	switch (call) {
 	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
 	case SEMTIMEDOP:
 		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
 					(const struct timespec __user *)fifth);
 
 	case SEMGET:
-		return sys_semget (first, second, third);
+		return sys_semget(first, second, third);
 	case SEMCTL: {
 		union semun fourth;
 		if (!ptr)
 			return -EINVAL;
 		if (get_user(fourth.__pad, (void __user * __user *) ptr))
 			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
+		return sys_semctl(first, second, third, fourth);
 	}
 
 	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
+		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
 				   second, third);
 	case MSGRCV:
 		switch (version) {
@@ -138,45 +138,45 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 			struct ipc_kludge tmp;
 			if (!ptr)
 				return -EINVAL;
-			
+
 			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr, 
-					   sizeof (tmp)))
+					   (struct ipc_kludge __user *) ptr,
+					   sizeof(tmp)))
 				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
+			return sys_msgrcv(first, tmp.msgp, second,
 					   tmp.msgtyp, third);
 		}
 		default:
-			return sys_msgrcv (first,
+			return sys_msgrcv(first,
 					   (struct msgbuf __user *) ptr,
 					   second, fifth, third);
 		}
 	case MSGGET:
-		return sys_msgget ((key_t) first, second);
+		return sys_msgget((key_t) first, second);
 	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+		return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
 
 	case SHMAT:
 		switch (version) {
 		default: {
 			ulong raddr;
-			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+			ret = do_shmat(first, (char __user *) ptr, second, &raddr);
 			if (ret)
 				return ret;
-			return put_user (raddr, (ulong __user *) third);
+			return put_user(raddr, (ulong __user *) third);
 		}
 		case 1:	/* iBCS2 emulator entry point */
 			if (!segment_eq(get_fs(), get_ds()))
 				return -EINVAL;
 			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
+			return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
 		}
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
+	case SHMDT:
+		return sys_shmdt((char __user *)ptr);
 	case SHMGET:
-		return sys_shmget (first, second, third);
+		return sys_shmget(first, second, third);
 	case SHMCTL:
-		return sys_shmctl (first, second,
+		return sys_shmctl(first, second,
 				   (struct shmid_ds __user *) ptr);
 	default:
 		return -ENOSYS;
@@ -186,28 +186,28 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 /*
  * Old cruft
  */
-asmlinkage int sys_uname(struct old_utsname __user * name)
+asmlinkage int sys_uname(struct old_utsname __user *name)
 {
 	int err;
 	if (!name)
 		return -EFAULT;
 	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
+	err = copy_to_user(name, utsname(), sizeof(*name));
 	up_read(&uts_sem);
-	return err?-EFAULT:0;
+	return err? -EFAULT:0;
 }
 
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user *name)
 {
 	int error;
 
 	if (!name)
 		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
 		return -EFAULT;
-  
-  	down_read(&uts_sem);
-	
+
+	down_read(&uts_sem);
+
 	error = __copy_to_user(&name->sysname, &utsname()->sysname,
 			       __OLD_UTS_LEN);
 	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
@@ -223,9 +223,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name)
 	error |= __copy_to_user(&name->machine, &utsname()->machine,
 				__OLD_UTS_LEN);
 	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-	
+
 	up_read(&uts_sem);
-	
+
 	error = error ? -EFAULT : 0;
 
 	return error;
@@ -241,6 +241,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 	long __res;
 	asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx"
 	: "=a" (__res)
-	: "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory");
+	: "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory");
 	return __res;
 }
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 2ff21f398934..059ca6ee59b4 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -39,9 +39,6 @@
 
 #include "do_timer.h"
 
-unsigned int cpu_khz;	/* Detected as we calibrate the TSC */
-EXPORT_SYMBOL(cpu_khz);
-
 int timer_ack;
 
 unsigned long profile_pc(struct pt_regs *regs)
@@ -84,8 +81,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	if (timer_ack) {
 		/*
 		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to reset the IRR bit for do_slow_gettimeoffset().
-		 * This will also deassert NMI lines for the watchdog if run
+		 * manually to deassert NMI lines for the watchdog if run
 		 * on an 82489DX-based system.
 		 */
 		spin_lock(&i8259A_lock);
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index c737849e2ef7..e3d49c553af2 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -56,7 +56,7 @@ static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
 /* calibrate_cpu is used on systems with fixed rate TSCs to determine
  * processor frequency */
 #define TICK_COUNT 100000000
-unsigned long __init native_calculate_cpu_khz(void)
+unsigned long __init calibrate_cpu(void)
 {
 	int tsc_start, tsc_now;
 	int i, no_ctr_free;
@@ -116,23 +116,11 @@ void __init hpet_time_init(void)
 
 void __init time_init(void)
 {
-	tsc_calibrate();
-
-	cpu_khz = tsc_khz;
-	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
-		(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
-		cpu_khz = calculate_cpu_khz();
-
-	if (unsynchronized_tsc())
-		mark_tsc_unstable("TSCs unsynchronized");
-
+	tsc_init();
 	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
 		vgetcpu_mode = VGETCPU_RDTSCP;
 	else
 		vgetcpu_mode = VGETCPU_LSL;
 
-	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
-		cpu_khz / 1000, cpu_khz % 1000);
-	init_tsc_clocksource();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index a1f07d793202..5039d0f097a2 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -15,6 +15,8 @@
 #include <asm/proto.h>
 #include <asm/apicdef.h>
 #include <asm/idle.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_bau.h>
 
 #include <mach_ipi.h>
 /*
@@ -162,6 +164,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	union smp_flush_state *f;
 	cpumask_t cpumask = *cpumaskp;
 
+	if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va))
+		return;
+
 	/* Caller has disabled preemption */
 	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
 	f = &per_cpu(flush_state, sender);
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
new file mode 100644
index 000000000000..d0fbb7712ab0
--- /dev/null
+++ b/arch/x86/kernel/tlb_uv.c
@@ -0,0 +1,792 @@
+/*
+ *	SGI UltraViolet TLB flush routines.
+ *
+ *	(c) 2008 Cliff Wickman <cpw@sgi.com>, SGI.
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ */
+#include <linux/mc146818rtc.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+
+#include <asm/mmu_context.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_bau.h>
+#include <asm/genapic.h>
+#include <asm/idle.h>
+#include <asm/tsc.h>
+
+#include <mach_apic.h>
+
+static struct bau_control	**uv_bau_table_bases __read_mostly;
+static int			uv_bau_retry_limit __read_mostly;
+
+/* position of pnode (which is nasid>>1): */
+static int			uv_nshift __read_mostly;
+
+static unsigned long		uv_mmask __read_mostly;
+
+static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
+static DEFINE_PER_CPU(struct bau_control, bau_control);
+
+/*
+ * Free a software acknowledge hardware resource by clearing its Pending
+ * bit. This will return a reply to the sender.
+ * If the message has timed out, a reply has already been sent by the
+ * hardware but the resource has not been released. In that case our
+ * clear of the Timeout bit (as well) will free the resource. No reply will
+ * be sent (the hardware will only do one reply per message).
+ */
+static void uv_reply_to_message(int resource,
+				struct bau_payload_queue_entry *msg,
+				struct bau_msg_status *msp)
+{
+	unsigned long dw;
+
+	dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource);
+	msg->replied_to = 1;
+	msg->sw_ack_vector = 0;
+	if (msp)
+		msp->seen_by.bits = 0;
+	uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
+}
+
+/*
+ * Do all the things a cpu should do for a TLB shootdown message.
+ * Other cpu's may come here at the same time for this message.
+ */
+static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
+				   int msg_slot, int sw_ack_slot)
+{
+	unsigned long this_cpu_mask;
+	struct bau_msg_status *msp;
+	int cpu;
+
+	msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
+	cpu = uv_blade_processor_id();
+	msg->number_of_cpus =
+	    uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+	this_cpu_mask = 1UL << cpu;
+	if (msp->seen_by.bits & this_cpu_mask)
+		return;
+	atomic_or_long(&msp->seen_by.bits, this_cpu_mask);
+
+	if (msg->replied_to == 1)
+		return;
+
+	if (msg->address == TLB_FLUSH_ALL) {
+		local_flush_tlb();
+		__get_cpu_var(ptcstats).alltlb++;
+	} else {
+		__flush_tlb_one(msg->address);
+		__get_cpu_var(ptcstats).onetlb++;
+	}
+
+	__get_cpu_var(ptcstats).requestee++;
+
+	atomic_inc_short(&msg->acknowledge_count);
+	if (msg->number_of_cpus == msg->acknowledge_count)
+		uv_reply_to_message(sw_ack_slot, msg, msp);
+}
+
+/*
+ * Examine the payload queue on one distribution node to see
+ * which messages have not been seen, and which cpu(s) have not seen them.
+ *
+ * Returns the number of cpu's that have not responded.
+ */
+static int uv_examine_destination(struct bau_control *bau_tablesp, int sender)
+{
+	struct bau_payload_queue_entry *msg;
+	struct bau_msg_status *msp;
+	int count = 0;
+	int i;
+	int j;
+
+	for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE;
+	     msg++, i++) {
+		if ((msg->sending_cpu == sender) && (!msg->replied_to)) {
+			msp = bau_tablesp->msg_statuses + i;
+			printk(KERN_DEBUG
+			       "blade %d: address:%#lx %d of %d, not cpu(s): ",
+			       i, msg->address, msg->acknowledge_count,
+			       msg->number_of_cpus);
+			for (j = 0; j < msg->number_of_cpus; j++) {
+				if (!((1L << j) & msp->seen_by.bits)) {
+					count++;
+					printk("%d ", j);
+				}
+			}
+			printk("\n");
+		}
+	}
+	return count;
+}
+
+/*
+ * Examine the payload queue on all the distribution nodes to see
+ * which messages have not been seen, and which cpu(s) have not seen them.
+ *
+ * Returns the number of cpu's that have not responded.
+ */
+static int uv_examine_destinations(struct bau_target_nodemask *distribution)
+{
+	int sender;
+	int i;
+	int count = 0;
+
+	sender = smp_processor_id();
+	for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) {
+		if (!bau_node_isset(i, distribution))
+			continue;
+		count += uv_examine_destination(uv_bau_table_bases[i], sender);
+	}
+	return count;
+}
+
+/*
+ * wait for completion of a broadcast message
+ *
+ * return COMPLETE, RETRY or GIVEUP
+ */
+static int uv_wait_completion(struct bau_desc *bau_desc,
+			      unsigned long mmr_offset, int right_shift)
+{
+	int exams = 0;
+	long destination_timeouts = 0;
+	long source_timeouts = 0;
+	unsigned long descriptor_status;
+
+	while ((descriptor_status = (((unsigned long)
+		uv_read_local_mmr(mmr_offset) >>
+			right_shift) & UV_ACT_STATUS_MASK)) !=
+			DESC_STATUS_IDLE) {
+		if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
+			source_timeouts++;
+			if (source_timeouts > SOURCE_TIMEOUT_LIMIT)
+				source_timeouts = 0;
+			__get_cpu_var(ptcstats).s_retry++;
+			return FLUSH_RETRY;
+		}
+		/*
+		 * spin here looking for progress at the destinations
+		 */
+		if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) {
+			destination_timeouts++;
+			if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) {
+				/*
+				 * returns number of cpus not responding
+				 */
+				if (uv_examine_destinations
+				    (&bau_desc->distribution) == 0) {
+					__get_cpu_var(ptcstats).d_retry++;
+					return FLUSH_RETRY;
+				}
+				exams++;
+				if (exams >= uv_bau_retry_limit) {
+					printk(KERN_DEBUG
+					       "uv_flush_tlb_others");
+					printk("giving up on cpu %d\n",
+					       smp_processor_id());
+					return FLUSH_GIVEUP;
+				}
+				/*
+				 * delays can hang the simulator
+				   udelay(1000);
+				 */
+				destination_timeouts = 0;
+			}
+		}
+	}
+	return FLUSH_COMPLETE;
+}
+
+/**
+ * uv_flush_send_and_wait
+ *
+ * Send a broadcast and wait for a broadcast message to complete.
+ *
+ * The cpumaskp mask contains the cpus the broadcast was sent to.
+ *
+ * Returns 1 if all remote flushing was done. The mask is zeroed.
+ * Returns 0 if some remote flushing remains to be done. The mask is left
+ * unchanged.
+ */
+int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
+			   cpumask_t *cpumaskp)
+{
+	int completion_status = 0;
+	int right_shift;
+	int tries = 0;
+	int blade;
+	int bit;
+	unsigned long mmr_offset;
+	unsigned long index;
+	cycles_t time1;
+	cycles_t time2;
+
+	if (cpu < UV_CPUS_PER_ACT_STATUS) {
+		mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
+		right_shift = cpu * UV_ACT_STATUS_SIZE;
+	} else {
+		mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
+		right_shift =
+		    ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE);
+	}
+	time1 = get_cycles();
+	do {
+		tries++;
+		index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) |
+			cpu;
+		uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
+		completion_status = uv_wait_completion(bau_desc, mmr_offset,
+					right_shift);
+	} while (completion_status == FLUSH_RETRY);
+	time2 = get_cycles();
+	__get_cpu_var(ptcstats).sflush += (time2 - time1);
+	if (tries > 1)
+		__get_cpu_var(ptcstats).retriesok++;
+
+	if (completion_status == FLUSH_GIVEUP) {
+		/*
+		 * Cause the caller to do an IPI-style TLB shootdown on
+		 * the cpu's, all of which are still in the mask.
+		 */
+		__get_cpu_var(ptcstats).ptc_i++;
+		return 0;
+	}
+
+	/*
+	 * Success, so clear the remote cpu's from the mask so we don't
+	 * use the IPI method of shootdown on them.
+	 */
+	for_each_cpu_mask(bit, *cpumaskp) {
+		blade = uv_cpu_to_blade_id(bit);
+		if (blade == this_blade)
+			continue;
+		cpu_clear(bit, *cpumaskp);
+	}
+	if (!cpus_empty(*cpumaskp))
+		return 0;
+	return 1;
+}
+
+/**
+ * uv_flush_tlb_others - globally purge translation cache of a virtual
+ * address or all TLB's
+ * @cpumaskp: mask of all cpu's in which the address is to be removed
+ * @mm: mm_struct containing virtual address range
+ * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
+ *
+ * This is the entry point for initiating any UV global TLB shootdown.
+ *
+ * Purges the translation caches of all specified processors of the given
+ * virtual address, or purges all TLB's on specified processors.
+ *
+ * The caller has derived the cpumaskp from the mm_struct and has subtracted
+ * the local cpu from the mask.  This function is called only if there
+ * are bits set in the mask. (e.g. flush_tlb_page())
+ *
+ * The cpumaskp is converted into a nodemask of the nodes containing
+ * the cpus.
+ *
+ * Returns 1 if all remote flushing was done.
+ * Returns 0 if some remote flushing remains to be done.
+ */
+int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm,
+			unsigned long va)
+{
+	int i;
+	int bit;
+	int blade;
+	int cpu;
+	int this_blade;
+	int locals = 0;
+	struct bau_desc *bau_desc;
+
+	cpu = uv_blade_processor_id();
+	this_blade = uv_numa_blade_id();
+	bau_desc = __get_cpu_var(bau_control).descriptor_base;
+	bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu;
+
+	bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
+
+	i = 0;
+	for_each_cpu_mask(bit, *cpumaskp) {
+		blade = uv_cpu_to_blade_id(bit);
+		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
+		if (blade == this_blade) {
+			locals++;
+			continue;
+		}
+		bau_node_set(blade, &bau_desc->distribution);
+		i++;
+	}
+	if (i == 0) {
+		/*
+		 * no off_node flushing; return status for local node
+		 */
+		if (locals)
+			return 0;
+		else
+			return 1;
+	}
+	__get_cpu_var(ptcstats).requestor++;
+	__get_cpu_var(ptcstats).ntargeted += i;
+
+	bau_desc->payload.address = va;
+	bau_desc->payload.sending_cpu = smp_processor_id();
+
+	return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp);
+}
+
+/*
+ * The BAU message interrupt comes here. (registered by set_intr_gate)
+ * See entry_64.S
+ *
+ * We received a broadcast assist message.
+ *
+ * Interrupts may have been disabled; this interrupt could represent
+ * the receipt of several messages.
+ *
+ * All cores/threads on this node get this interrupt.
+ * The last one to see it does the s/w ack.
+ * (the resource will not be freed until noninterruptable cpus see this
+ *  interrupt; hardware will timeout the s/w ack and reply ERROR)
+ */
+void uv_bau_message_interrupt(struct pt_regs *regs)
+{
+	struct bau_payload_queue_entry *va_queue_first;
+	struct bau_payload_queue_entry *va_queue_last;
+	struct bau_payload_queue_entry *msg;
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	cycles_t time1;
+	cycles_t time2;
+	int msg_slot;
+	int sw_ack_slot;
+	int fw;
+	int count = 0;
+	unsigned long local_pnode;
+
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+
+	time1 = get_cycles();
+
+	local_pnode = uv_blade_to_pnode(uv_numa_blade_id());
+
+	va_queue_first = __get_cpu_var(bau_control).va_queue_first;
+	va_queue_last = __get_cpu_var(bau_control).va_queue_last;
+
+	msg = __get_cpu_var(bau_control).bau_msg_head;
+	while (msg->sw_ack_vector) {
+		count++;
+		fw = msg->sw_ack_vector;
+		msg_slot = msg - va_queue_first;
+		sw_ack_slot = ffs(fw) - 1;
+
+		uv_bau_process_message(msg, msg_slot, sw_ack_slot);
+
+		msg++;
+		if (msg > va_queue_last)
+			msg = va_queue_first;
+		__get_cpu_var(bau_control).bau_msg_head = msg;
+	}
+	if (!count)
+		__get_cpu_var(ptcstats).nomsg++;
+	else if (count > 1)
+		__get_cpu_var(ptcstats).multmsg++;
+
+	time2 = get_cycles();
+	__get_cpu_var(ptcstats).dflush += (time2 - time1);
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+static void uv_enable_timeouts(void)
+{
+	int i;
+	int blade;
+	int last_blade;
+	int pnode;
+	int cur_cpu = 0;
+	unsigned long apicid;
+
+	last_blade = -1;
+	for_each_online_node(i) {
+		blade = uv_node_to_blade_id(i);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+		pnode = uv_blade_to_pnode(blade);
+		cur_cpu += uv_blade_nr_possible_cpus(i);
+	}
+}
+
+static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset)
+{
+	if (*offset < num_possible_cpus())
+		return offset;
+	return NULL;
+}
+
+static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset)
+{
+	(*offset)++;
+	if (*offset < num_possible_cpus())
+		return offset;
+	return NULL;
+}
+
+static void uv_ptc_seq_stop(struct seq_file *file, void *data)
+{
+}
+
+/*
+ * Display the statistics thru /proc
+ * data points to the cpu number
+ */
+static int uv_ptc_seq_show(struct seq_file *file, void *data)
+{
+	struct ptc_stats *stat;
+	int cpu;
+
+	cpu = *(loff_t *)data;
+
+	if (!cpu) {
+		seq_printf(file,
+		"# cpu requestor requestee one all sretry dretry ptc_i ");
+		seq_printf(file,
+		"sw_ack sflush dflush sok dnomsg dmult starget\n");
+	}
+	if (cpu < num_possible_cpus() && cpu_online(cpu)) {
+		stat = &per_cpu(ptcstats, cpu);
+		seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ",
+			   cpu, stat->requestor,
+			   stat->requestee, stat->onetlb, stat->alltlb,
+			   stat->s_retry, stat->d_retry, stat->ptc_i);
+		seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
+			   uv_read_global_mmr64(uv_blade_to_pnode
+					(uv_cpu_to_blade_id(cpu)),
+					UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
+			   stat->sflush, stat->dflush,
+			   stat->retriesok, stat->nomsg,
+			   stat->multmsg, stat->ntargeted);
+	}
+
+	return 0;
+}
+
+/*
+ *  0: display meaning of the statistics
+ * >0: retry limit
+ */
+static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
+				 size_t count, loff_t *data)
+{
+	long newmode;
+	char optstr[64];
+
+	if (count == 0 || count > sizeof(optstr))
+		return -EINVAL;
+	if (copy_from_user(optstr, user, count))
+		return -EFAULT;
+	optstr[count - 1] = '\0';
+	if (strict_strtoul(optstr, 10, &newmode) < 0) {
+		printk(KERN_DEBUG "%s is invalid\n", optstr);
+		return -EINVAL;
+	}
+
+	if (newmode == 0) {
+		printk(KERN_DEBUG "# cpu:      cpu number\n");
+		printk(KERN_DEBUG
+		"requestor:  times this cpu was the flush requestor\n");
+		printk(KERN_DEBUG
+		"requestee:  times this cpu was requested to flush its TLBs\n");
+		printk(KERN_DEBUG
+		"one:        times requested to flush a single address\n");
+		printk(KERN_DEBUG
+		"all:        times requested to flush all TLB's\n");
+		printk(KERN_DEBUG
+		"sretry:     number of retries of source-side timeouts\n");
+		printk(KERN_DEBUG
+		"dretry:     number of retries of destination-side timeouts\n");
+		printk(KERN_DEBUG
+		"ptc_i:      times UV fell through to IPI-style flushes\n");
+		printk(KERN_DEBUG
+		"sw_ack:     image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n");
+		printk(KERN_DEBUG
+		"sflush_us:  cycles spent in uv_flush_tlb_others()\n");
+		printk(KERN_DEBUG
+		"dflush_us:  cycles spent in handling flush requests\n");
+		printk(KERN_DEBUG "sok:        successes on retry\n");
+		printk(KERN_DEBUG "dnomsg:     interrupts with no message\n");
+		printk(KERN_DEBUG
+		"dmult:      interrupts with multiple messages\n");
+		printk(KERN_DEBUG "starget:    nodes targeted\n");
+	} else {
+		uv_bau_retry_limit = newmode;
+		printk(KERN_DEBUG "timeout retry limit:%d\n",
+		       uv_bau_retry_limit);
+	}
+
+	return count;
+}
+
+static const struct seq_operations uv_ptc_seq_ops = {
+	.start		= uv_ptc_seq_start,
+	.next		= uv_ptc_seq_next,
+	.stop		= uv_ptc_seq_stop,
+	.show		= uv_ptc_seq_show
+};
+
+static int uv_ptc_proc_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &uv_ptc_seq_ops);
+}
+
+static const struct file_operations proc_uv_ptc_operations = {
+	.open		= uv_ptc_proc_open,
+	.read		= seq_read,
+	.write		= uv_ptc_proc_write,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init uv_ptc_init(void)
+{
+	struct proc_dir_entry *proc_uv_ptc;
+
+	if (!is_uv_system())
+		return 0;
+
+	if (!proc_mkdir("sgi_uv", NULL))
+		return -EINVAL;
+
+	proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL);
+	if (!proc_uv_ptc) {
+		printk(KERN_ERR "unable to create %s proc entry\n",
+		       UV_PTC_BASENAME);
+		remove_proc_entry("sgi_uv", NULL);
+		return -EINVAL;
+	}
+	proc_uv_ptc->proc_fops = &proc_uv_ptc_operations;
+	return 0;
+}
+
+/*
+ * begin the initialization of the per-blade control structures
+ */
+static struct bau_control * __init uv_table_bases_init(int blade, int node)
+{
+	int i;
+	int *ip;
+	struct bau_msg_status *msp;
+	struct bau_control *bau_tabp;
+
+	bau_tabp =
+	    kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node);
+	BUG_ON(!bau_tabp);
+
+	bau_tabp->msg_statuses =
+	    kmalloc_node(sizeof(struct bau_msg_status) *
+			 DEST_Q_SIZE, GFP_KERNEL, node);
+	BUG_ON(!bau_tabp->msg_statuses);
+
+	for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++)
+		bau_cpubits_clear(&msp->seen_by, (int)
+				  uv_blade_nr_possible_cpus(blade));
+
+	bau_tabp->watching =
+	    kmalloc_node(sizeof(int) * DEST_NUM_RESOURCES, GFP_KERNEL, node);
+	BUG_ON(!bau_tabp->watching);
+
+	for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++)
+		*ip = 0;
+
+	uv_bau_table_bases[blade] = bau_tabp;
+
+	return bau_tabp;
+}
+
+/*
+ * finish the initialization of the per-blade control structures
+ */
+static void __init
+uv_table_bases_finish(int blade, int node, int cur_cpu,
+		      struct bau_control *bau_tablesp,
+		      struct bau_desc *adp)
+{
+	struct bau_control *bcp;
+	int i;
+
+	for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
+		bcp = (struct bau_control *)&per_cpu(bau_control, i);
+
+		bcp->bau_msg_head	= bau_tablesp->va_queue_first;
+		bcp->va_queue_first	= bau_tablesp->va_queue_first;
+		bcp->va_queue_last	= bau_tablesp->va_queue_last;
+		bcp->watching		= bau_tablesp->watching;
+		bcp->msg_statuses	= bau_tablesp->msg_statuses;
+		bcp->descriptor_base	= adp;
+	}
+}
+
+/*
+ * initialize the sending side's sending buffers
+ */
+static struct bau_desc * __init
+uv_activation_descriptor_init(int node, int pnode)
+{
+	int i;
+	unsigned long pa;
+	unsigned long m;
+	unsigned long n;
+	unsigned long mmr_image;
+	struct bau_desc *adp;
+	struct bau_desc *ad2;
+
+	adp = (struct bau_desc *)
+	    kmalloc_node(16384, GFP_KERNEL, node);
+	BUG_ON(!adp);
+
+	pa = __pa((unsigned long)adp);
+	n = pa >> uv_nshift;
+	m = pa & uv_mmask;
+
+	mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
+	if (mmr_image) {
+		uv_write_global_mmr64(pnode, (unsigned long)
+				      UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
+	}
+
+	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
+		memset(ad2, 0, sizeof(struct bau_desc));
+		ad2->header.sw_ack_flag = 1;
+		ad2->header.base_dest_nodeid =
+		    uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+		ad2->header.command = UV_NET_ENDPOINT_INTD;
+		ad2->header.int_both = 1;
+		/*
+		 * all others need to be set to zero:
+		 *   fairness chaining multilevel count replied_to
+		 */
+	}
+	return adp;
+}
+
+/*
+ * initialize the destination side's receiving buffers
+ */
+static struct bau_payload_queue_entry * __init
+uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
+{
+	struct bau_payload_queue_entry *pqp;
+	char *cp;
+
+	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
+		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
+		GFP_KERNEL, node);
+	BUG_ON(!pqp);
+
+	cp = (char *)pqp + 31;
+	pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
+	bau_tablesp->va_queue_first = pqp;
+	uv_write_global_mmr64(pnode,
+			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
+			      ((unsigned long)pnode <<
+			       UV_PAYLOADQ_PNODE_SHIFT) |
+			      uv_physnodeaddr(pqp));
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
+			      uv_physnodeaddr(pqp));
+	bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1);
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST,
+			      (unsigned long)
+			      uv_physnodeaddr(bau_tablesp->va_queue_last));
+	memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE);
+
+	return pqp;
+}
+
+/*
+ * Initialization of each UV blade's structures
+ */
+static int __init uv_init_blade(int blade, int node, int cur_cpu)
+{
+	int pnode;
+	unsigned long pa;
+	unsigned long apicid;
+	struct bau_desc *adp;
+	struct bau_payload_queue_entry *pqp;
+	struct bau_control *bau_tablesp;
+
+	bau_tablesp = uv_table_bases_init(blade, node);
+	pnode = uv_blade_to_pnode(blade);
+	adp = uv_activation_descriptor_init(node, pnode);
+	pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
+	uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+	/*
+	 * the below initialization can't be in firmware because the
+	 * messaging IRQ will be determined by the OS
+	 */
+	apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
+	if ((pa & 0xff) != UV_BAU_MESSAGE) {
+		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
+				      ((apicid << 32) | UV_BAU_MESSAGE));
+	}
+	return 0;
+}
+
+/*
+ * Initialization of BAU-related structures
+ */
+static int __init uv_bau_init(void)
+{
+	int blade;
+	int node;
+	int nblades;
+	int last_blade;
+	int cur_cpu = 0;
+
+	if (!is_uv_system())
+		return 0;
+
+	uv_bau_retry_limit = 1;
+	uv_nshift = uv_hub_info->n_val;
+	uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+	nblades = 0;
+	last_blade = -1;
+	for_each_online_node(node) {
+		blade = uv_node_to_blade_id(node);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		nblades++;
+	}
+	uv_bau_table_bases = (struct bau_control **)
+	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
+	BUG_ON(!uv_bau_table_bases);
+
+	last_blade = -1;
+	for_each_online_node(node) {
+		blade = uv_node_to_blade_id(node);
+		if (blade == last_blade)
+			continue;
+		last_blade = blade;
+		uv_init_blade(blade, node, cur_cpu);
+		cur_cpu += uv_blade_nr_possible_cpus(blade);
+	}
+	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	uv_enable_timeouts();
+
+	return 0;
+}
+__initcall(uv_bau_init);
+__initcall(uv_ptc_init);
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index abbf199adebb..1106fac6024d 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -2,7 +2,7 @@
 
 #include <asm/trampoline.h>
 
-/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
+/* ready for x86_64 and x86 */
 unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
 
 /*
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 08d752de4eee..8a768973c4f0 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
  *
  *  Pentium III FXSR, SSE support
  *	Gareth Hughes <gareth@valinux.com>, May 2000
@@ -60,8 +61,6 @@
 
 #include "mach_traps.h"
 
-int panic_on_unrecovered_nmi;
-
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
 EXPORT_SYMBOL_GPL(used_vectors);
 
@@ -98,19 +97,22 @@ asmlinkage void alignment_check(void);
 asmlinkage void spurious_interrupt_bug(void);
 asmlinkage void machine_check(void);
 
+int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 24;
 static unsigned int code_bytes = 64;
+static int ignore_nmis;
+static int die_counter;
 
 void printk_address(unsigned long address, int reliable)
 {
 #ifdef CONFIG_KALLSYMS
-	char namebuf[KSYM_NAME_LEN];
 	unsigned long offset = 0;
 	unsigned long symsize;
 	const char *symname;
-	char reliab[4] = "";
-	char *delim = ":";
 	char *modname;
+	char *delim = ":";
+	char namebuf[KSYM_NAME_LEN];
+	char reliab[4] = "";
 
 	symname = kallsyms_lookup(address, &symsize, &offset,
 					&modname, namebuf);
@@ -130,22 +132,23 @@ void printk_address(unsigned long address, int reliable)
 #endif
 }
 
-static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned size)
+static inline int valid_stack_ptr(struct thread_info *tinfo,
+			void *p, unsigned int size)
 {
-	return	p > (void *)tinfo &&
-		p <= (void *)tinfo + THREAD_SIZE - size;
+	void *t = tinfo;
+	return	p > t && p <= t + THREAD_SIZE - size;
 }
 
 /* The form of the top of the frame on the stack */
 struct stack_frame {
-	struct stack_frame	*next_frame;
-	unsigned long		return_address;
+	struct stack_frame *next_frame;
+	unsigned long return_address;
 };
 
 static inline unsigned long
 print_context_stack(struct thread_info *tinfo,
-		    unsigned long *stack, unsigned long bp,
-		    const struct stacktrace_ops *ops, void *data)
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data)
 {
 	struct stack_frame *frame = (struct stack_frame *)bp;
 
@@ -167,8 +170,6 @@ print_context_stack(struct thread_info *tinfo,
 	return bp;
 }
 
-#define MSG(msg)		ops->warning(data, msg)
-
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
@@ -178,7 +179,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 	if (!stack) {
 		unsigned long dummy;
-
 		stack = &dummy;
 		if (task != current)
 			stack = (unsigned long *)task->thread.sp;
@@ -196,7 +196,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	}
 #endif
 
-	while (1) {
+	for (;;) {
 		struct thread_info *context;
 
 		context = (struct thread_info *)
@@ -248,10 +248,10 @@ static void print_trace_address(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops print_trace_ops = {
-	.warning		= print_trace_warning,
-	.warning_symbol		= print_trace_warning_symbol,
-	.stack			= print_trace_stack,
-	.address		= print_trace_address,
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
 };
 
 static void
@@ -351,15 +351,14 @@ void show_registers(struct pt_regs *regs)
 		printk(KERN_EMERG "Code: ");
 
 		ip = (u8 *)regs->ip - code_prologue;
-		if (ip < (u8 *)PAGE_OFFSET ||
-			probe_kernel_address(ip, c)) {
+		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
 			/* try starting at EIP */
 			ip = (u8 *)regs->ip;
 			code_len = code_len - code_prologue + 1;
 		}
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
-				probe_kernel_address(ip, c)) {
+					probe_kernel_address(ip, c)) {
 				printk(" Bad EIP value.");
 				break;
 			}
@@ -384,8 +383,6 @@ int is_valid_bugaddr(unsigned long ip)
 	return ud2 == 0x0b0f;
 }
 
-static int die_counter;
-
 int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
 	unsigned short ss;
@@ -402,26 +399,22 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 	printk("DEBUG_PAGEALLOC");
 #endif
 	printk("\n");
-
 	if (notify_die(DIE_OOPS, str, regs, err,
-			current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) {
-
-		show_registers(regs);
-		/* Executive summary in case the oops scrolled away */
-		sp = (unsigned long) (&regs->sp);
-		savesegment(ss, ss);
-		if (user_mode(regs)) {
-			sp = regs->sp;
-			ss = regs->ss & 0xffff;
-		}
-		printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
-		print_symbol("%s", regs->ip);
-		printk(" SS:ESP %04x:%08lx\n", ss, sp);
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		return 1;
 
-		return 0;
+	show_registers(regs);
+	/* Executive summary in case the oops scrolled away */
+	sp = (unsigned long) (&regs->sp);
+	savesegment(ss, ss);
+	if (user_mode(regs)) {
+		sp = regs->sp;
+		ss = regs->ss & 0xffff;
 	}
-
-	return 1;
+	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
+	print_symbol("%s", regs->ip);
+	printk(" SS:ESP %04x:%08lx\n", ss, sp);
+	return 0;
 }
 
 /*
@@ -546,7 +539,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 {									\
 	trace_hardirqs_fixup();						\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 0, regs, error_code, NULL);		\
 }
@@ -562,7 +555,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 	info.si_code = sicode;						\
 	info.si_addr = (void __user *)siaddr;				\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 0, regs, error_code, &info);	\
 }
@@ -571,7 +564,7 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 void do_##name(struct pt_regs *regs, long error_code)			\
 {									\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 1, regs, error_code, NULL);		\
 }
@@ -586,27 +579,29 @@ void do_##name(struct pt_regs *regs, long error_code)			\
 	info.si_addr = (void __user *)siaddr;				\
 	trace_hardirqs_fixup();						\
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
-						== NOTIFY_STOP)		\
+							== NOTIFY_STOP)	\
 		return;							\
 	do_trap(trapnr, signr, str, 1, regs, error_code, &info);	\
 }
 
-DO_VM86_ERROR_INFO(0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
 #ifndef CONFIG_KPROBES
 DO_VM86_ERROR(3, SIGTRAP, "int3", int3)
 #endif
 DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow)
 DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO(6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
-DO_ERROR(9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
-DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
+DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
 DO_ERROR_INFO(32, SIGILL, "iret exception", iret_error, ILL_BADSTK, 0, 1)
 
-void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
+void __kprobes
+do_general_protection(struct pt_regs *regs, long error_code)
 {
+	struct task_struct *tsk;
 	struct thread_struct *thread;
 	struct tss_struct *tss;
 	int cpu;
@@ -647,23 +642,24 @@ void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
 	if (regs->flags & X86_VM_MASK)
 		goto gp_in_vm86;
 
+	tsk = current;
 	if (!user_mode(regs))
 		goto gp_in_kernel;
 
-	current->thread.error_code = error_code;
-	current->thread.trap_no = 13;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
 
-	if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) &&
-	    printk_ratelimit()) {
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+			printk_ratelimit()) {
 		printk(KERN_INFO
-		    "%s[%d] general protection ip:%lx sp:%lx error:%lx",
-		    current->comm, task_pid_nr(current),
-		    regs->ip, regs->sp, error_code);
+			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
+			tsk->comm, task_pid_nr(tsk),
+			regs->ip, regs->sp, error_code);
 		print_vma_addr(" in ", regs->ip);
 		printk("\n");
 	}
 
-	force_sig(SIGSEGV, current);
+	force_sig(SIGSEGV, tsk);
 	return;
 
 gp_in_vm86:
@@ -672,14 +668,15 @@ gp_in_vm86:
 	return;
 
 gp_in_kernel:
-	if (!fixup_exception(regs)) {
-		current->thread.error_code = error_code;
-		current->thread.trap_no = 13;
-		if (notify_die(DIE_GPF, "general protection fault", regs,
+	if (fixup_exception(regs))
+		return;
+
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+	if (notify_die(DIE_GPF, "general protection fault", regs,
 				error_code, 13, SIGSEGV) == NOTIFY_STOP)
-			return;
-		die("general protection fault", regs, error_code);
-	}
+		return;
+	die("general protection fault", regs, error_code);
 }
 
 static notrace __kprobes void
@@ -756,9 +753,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(nmi_print_lock);
 
-void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
+void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
 {
-	if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
 		return;
 
 	spin_lock(&nmi_print_lock);
@@ -767,10 +764,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 	* to get a message out:
 	*/
 	bust_spinlocks(1);
-	printk(KERN_EMERG "%s", msg);
+	printk(KERN_EMERG "%s", str);
 	printk(" on CPU%d, ip %08lx, registers:\n",
 		smp_processor_id(), regs->ip);
 	show_registers(regs);
+	if (do_panic)
+		panic("Non maskable interrupt");
 	console_silent();
 	spin_unlock(&nmi_print_lock);
 	bust_spinlocks(0);
@@ -790,14 +789,17 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
+	int cpu;
+
+	cpu = smp_processor_id();
 
-	/* Only the BSP gets external NMIs from the system: */
-	if (!smp_processor_id())
+	/* Only the BSP gets external NMIs from the system. */
+	if (!cpu)
 		reason = get_nmi_reason();
 
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
-							== NOTIFY_STOP)
+								== NOTIFY_STOP)
 			return;
 #ifdef CONFIG_X86_LOCAL_APIC
 		/*
@@ -806,7 +808,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 		 */
 		if (nmi_watchdog_tick(regs, reason))
 			return;
-		if (!do_nmi_callback(regs, smp_processor_id()))
+		if (!do_nmi_callback(regs, cpu))
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
@@ -816,6 +818,8 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 	}
 	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
 		return;
+
+	/* AK: following checks seem to be broken on modern chipsets. FIXME */
 	if (reason & 0x80)
 		mem_parity_error(reason, regs);
 	if (reason & 0x40)
@@ -827,8 +831,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 	reassert_nmi();
 }
 
-static int ignore_nmis;
-
 notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code)
 {
 	int cpu;
@@ -913,7 +915,7 @@ void __kprobes do_debug(struct pt_regs *regs, long error_code)
 	tsk->thread.debugctlmsr = 0;
 
 	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-					SIGTRAP) == NOTIFY_STOP)
+						SIGTRAP) == NOTIFY_STOP)
 		return;
 	/* It's safe to allow irq's after DR6 has been saved */
 	if (regs->flags & X86_EFLAGS_IF)
@@ -974,9 +976,8 @@ clear_TF_reenable:
 void math_error(void __user *ip)
 {
 	struct task_struct *task;
-	unsigned short cwd;
-	unsigned short swd;
 	siginfo_t info;
+	unsigned short cwd, swd;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -995,7 +996,7 @@ void math_error(void __user *ip)
 	 * C1 reg you need in case of a stack fault, 0x040 is the stack
 	 * fault bit.  We should only be taking one exception at a time,
 	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't syncronizing its FPU usage
+	 * then we have a bad program that isn't synchronizing its FPU usage
 	 * and it will suffer the consequences since we won't be able to
 	 * fully reproduce the context of the exception
 	 */
@@ -1004,7 +1005,7 @@ void math_error(void __user *ip)
 	switch (swd & ~cwd & 0x3f) {
 	case 0x000: /* No unmasked exception */
 		return;
-	default:    /* Multiple exceptions */
+	default: /* Multiple exceptions */
 		break;
 	case 0x001: /* Invalid Op */
 		/*
@@ -1040,8 +1041,8 @@ void do_coprocessor_error(struct pt_regs *regs, long error_code)
 static void simd_math_error(void __user *ip)
 {
 	struct task_struct *task;
-	unsigned short mxcsr;
 	siginfo_t info;
+	unsigned short mxcsr;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -1117,7 +1118,7 @@ void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 
 unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
 {
-	struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt;
+	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
 	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
 	unsigned long new_kesp = kesp - base;
 	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
@@ -1196,19 +1197,16 @@ void __init trap_init(void)
 	early_iounmap(p, 4);
 #endif
 
-#ifdef CONFIG_X86_LOCAL_APIC
-	init_apic_mappings();
-#endif
-	set_trap_gate(0,  &divide_error);
-	set_intr_gate(1,  &debug);
-	set_intr_gate(2,  &nmi);
-	set_system_intr_gate(3, &int3); /* int3/4 can be called from all */
-	set_system_gate(4, &overflow);
-	set_trap_gate(5,  &bounds);
-	set_trap_gate(6,  &invalid_op);
-	set_trap_gate(7,  &device_not_available);
-	set_task_gate(8,  GDT_ENTRY_DOUBLEFAULT_TSS);
-	set_trap_gate(9,  &coprocessor_segment_overrun);
+	set_trap_gate(0, &divide_error);
+	set_intr_gate(1, &debug);
+	set_intr_gate(2, &nmi);
+	set_system_intr_gate(3, &int3); /* int3 can be called from all */
+	set_system_gate(4, &overflow); /* int4 can be called from all */
+	set_trap_gate(5, &bounds);
+	set_trap_gate(6, &invalid_op);
+	set_trap_gate(7, &device_not_available);
+	set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
+	set_trap_gate(9, &coprocessor_segment_overrun);
 	set_trap_gate(10, &invalid_TSS);
 	set_trap_gate(11, &segment_not_present);
 	set_trap_gate(12, &stack_segment);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index f1a95d105953..2696a6837782 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -10,49 +10,49 @@
  * 'Traps.c' handles hardware traps and faults after we have saved some
  * state in 'entry.S'.
  */
-#include <linux/sched.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/spinlock.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/kdebug.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
 #include <linux/string.h>
+#include <linux/unwind.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
-#include <linux/ptrace.h>
+#include <linux/kexec.h>
+#include <linux/sched.h>
 #include <linux/timer.h>
-#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/nmi.h>
-#include <linux/kprobes.h>
-#include <linux/kexec.h>
-#include <linux/unwind.h>
-#include <linux/uaccess.h>
 #include <linux/bug.h>
-#include <linux/kdebug.h>
-#include <linux/utsname.h>
-
-#include <mach_traps.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
 
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
 
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/atomic.h>
+#include <asm/stacktrace.h>
+#include <asm/processor.h>
 #include <asm/debugreg.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/unwind.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
-#include <asm/processor.h>
-#include <asm/unwind.h>
+#include <asm/nmi.h>
 #include <asm/smp.h>
+#include <asm/io.h>
 #include <asm/pgalloc.h>
-#include <asm/pda.h>
 #include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/stacktrace.h>
+#include <asm/pda.h>
+
+#include <mach_traps.h>
 
 asmlinkage void divide_error(void);
 asmlinkage void debug(void);
@@ -71,12 +71,15 @@ asmlinkage void general_protection(void);
 asmlinkage void page_fault(void);
 asmlinkage void coprocessor_error(void);
 asmlinkage void simd_coprocessor_error(void);
-asmlinkage void reserved(void);
 asmlinkage void alignment_check(void);
-asmlinkage void machine_check(void);
 asmlinkage void spurious_interrupt_bug(void);
+asmlinkage void machine_check(void);
 
+int panic_on_unrecovered_nmi;
+int kstack_depth_to_print = 12;
 static unsigned int code_bytes = 64;
+static int ignore_nmis;
+static int die_counter;
 
 static inline void conditional_sti(struct pt_regs *regs)
 {
@@ -100,8 +103,6 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 	dec_preempt_count();
 }
 
-int kstack_depth_to_print = 12;
-
 void printk_address(unsigned long address, int reliable)
 {
 	printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address);
@@ -181,8 +182,6 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 	return NULL;
 }
 
-#define MSG(txt) ops->warning(data, txt)
-
 /*
  * x86-64 can have up to three kernel stacks: 
  * process stack
@@ -209,11 +208,11 @@ struct stack_frame {
 	unsigned long return_address;
 };
 
-
-static inline unsigned long print_context_stack(struct thread_info *tinfo,
-				unsigned long *stack, unsigned long bp,
-				const struct stacktrace_ops *ops, void *data,
-				unsigned long *end)
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data,
+		unsigned long *end)
 {
 	struct stack_frame *frame = (struct stack_frame *)bp;
 
@@ -235,7 +234,7 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo,
 	return bp;
 }
 
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
 {
@@ -244,36 +243,34 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
 	unsigned used = 0;
 	struct thread_info *tinfo;
 
-	if (!tsk)
-		tsk = current;
-	tinfo = task_thread_info(tsk);
+	if (!task)
+		task = current;
 
 	if (!stack) {
 		unsigned long dummy;
 		stack = &dummy;
-		if (tsk && tsk != current)
-			stack = (unsigned long *)tsk->thread.sp;
+		if (task && task != current)
+			stack = (unsigned long *)task->thread.sp;
 	}
 
 #ifdef CONFIG_FRAME_POINTER
 	if (!bp) {
-		if (tsk == current) {
+		if (task == current) {
 			/* Grab bp right from our regs */
-			asm("movq %%rbp, %0" : "=r" (bp):);
+			asm("movq %%rbp, %0" : "=r" (bp) :);
 		} else {
 			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) tsk->thread.sp;
+			bp = *(unsigned long *) task->thread.sp;
 		}
 	}
 #endif
 
-
-
 	/*
 	 * Print function call entries in all stacks, starting at the
 	 * current stack address. If the stacks consist of nested
 	 * exceptions
 	 */
+	tinfo = task_thread_info(task);
 	for (;;) {
 		char *id;
 		unsigned long *estack_end;
@@ -358,18 +355,17 @@ static const struct stacktrace_ops print_trace_ops = {
 	.address = print_trace_address,
 };
 
-void
-show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack,
-		unsigned long bp)
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
 {
 	printk("\nCall Trace:\n");
-	dump_trace(tsk, regs, stack, bp, &print_trace_ops, NULL);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, NULL);
 	printk("\n");
 }
 
 static void
-_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
-							unsigned long bp)
+_show_stack(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp)
 {
 	unsigned long *stack;
 	int i;
@@ -381,14 +377,14 @@ _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
 	// back trace for this cpu.
 
 	if (sp == NULL) {
-		if (tsk)
-			sp = (unsigned long *)tsk->thread.sp;
+		if (task)
+			sp = (unsigned long *)task->thread.sp;
 		else
 			sp = (unsigned long *)&sp;
 	}
 
 	stack = sp;
-	for(i=0; i < kstack_depth_to_print; i++) {
+	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (stack >= irqstack && stack <= irqstack_end) {
 			if (stack == irqstack_end) {
 				stack = (unsigned long *) (irqstack_end[-1]);
@@ -403,12 +399,12 @@ _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *sp,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
-	show_trace(tsk, regs, sp, bp);
+	show_trace(task, regs, sp, bp);
 }
 
-void show_stack(struct task_struct *tsk, unsigned long * sp)
+void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	_show_stack(tsk, NULL, sp, 0);
+	_show_stack(task, NULL, sp, 0);
 }
 
 /*
@@ -416,8 +412,8 @@ void show_stack(struct task_struct *tsk, unsigned long * sp)
  */
 void dump_stack(void)
 {
-	unsigned long dummy;
 	unsigned long bp = 0;
+	unsigned long stack;
 
 #ifdef CONFIG_FRAME_POINTER
 	if (!bp)
@@ -429,7 +425,7 @@ void dump_stack(void)
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
-	show_trace(NULL, NULL, &dummy, bp);
+	show_trace(NULL, NULL, &stack, bp);
 }
 
 EXPORT_SYMBOL(dump_stack);
@@ -440,12 +436,8 @@ void show_registers(struct pt_regs *regs)
 	unsigned long sp;
 	const int cpu = smp_processor_id();
 	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
-	u8 *ip;
-	unsigned int code_prologue = code_bytes * 43 / 64;
-	unsigned int code_len = code_bytes;
 
 	sp = regs->sp;
-	ip = (u8 *) regs->ip - code_prologue;
 	printk("CPU %d ", cpu);
 	__show_regs(regs);
 	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
@@ -456,15 +448,21 @@ void show_registers(struct pt_regs *regs)
 	 * time of the fault..
 	 */
 	if (!user_mode(regs)) {
+		unsigned int code_prologue = code_bytes * 43 / 64;
+		unsigned int code_len = code_bytes;
 		unsigned char c;
+		u8 *ip;
+
 		printk("Stack: ");
 		_show_stack(NULL, regs, (unsigned long *)sp, regs->bp);
 		printk("\n");
 
 		printk(KERN_EMERG "Code: ");
+
+		ip = (u8 *)regs->ip - code_prologue;
 		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
 			/* try starting at RIP */
-			ip = (u8 *) regs->ip;
+			ip = (u8 *)regs->ip;
 			code_len = code_len - code_prologue + 1;
 		}
 		for (i = 0; i < code_len; i++, ip++) {
@@ -480,7 +478,7 @@ void show_registers(struct pt_regs *regs)
 		}
 	}
 	printk("\n");
-}	
+}
 
 int is_valid_bugaddr(unsigned long ip)
 {
@@ -538,10 +536,9 @@ void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	do_exit(signr);
 }
 
-int __kprobes __die(const char * str, struct pt_regs * regs, long err)
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
-	static int die_counter;
-	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter);
+	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff, ++die_counter);
 #ifdef CONFIG_PREEMPT
 	printk("PREEMPT ");
 #endif
@@ -552,8 +549,10 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	printk("DEBUG_PAGEALLOC");
 #endif
 	printk("\n");
-	if (notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, str, regs, err,
+			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
 		return 1;
+
 	show_registers(regs);
 	add_taint(TAINT_DIE);
 	/* Executive summary in case the oops scrolled away */
@@ -565,7 +564,7 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	return 0;
 }
 
-void die(const char * str, struct pt_regs * regs, long err)
+void die(const char *str, struct pt_regs *regs, long err)
 {
 	unsigned long flags = oops_begin();
 
@@ -582,8 +581,7 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 {
 	unsigned long flags;
 
-	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) ==
-	    NOTIFY_STOP)
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
 		return;
 
 	flags = oops_begin();
@@ -591,7 +589,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 	 * We are in trouble anyway, lets at least try
 	 * to get a message out.
 	 */
-	printk(str, smp_processor_id());
+	printk(KERN_EMERG "%s", str);
+	printk(" on CPU%d, ip %08lx, registers:\n",
+		smp_processor_id(), regs->ip);
 	show_registers(regs);
 	if (kexec_should_crash(current))
 		crash_kexec(regs);
@@ -603,44 +603,44 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic)
 	do_exit(SIGBUS);
 }
 
-static void __kprobes do_trap(int trapnr, int signr, char *str,
-			      struct pt_regs * regs, long error_code,
-			      siginfo_t *info)
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
+	long error_code, siginfo_t *info)
 {
 	struct task_struct *tsk = current;
 
-	if (user_mode(regs)) {
-		/*
-		 * We want error_code and trap_no set for userspace
-		 * faults and kernelspace faults which result in
-		 * die(), but not kernelspace faults which are fixed
-		 * up.  die() gives the process no chance to handle
-		 * the signal and notice the kernel fault information,
-		 * so that won't result in polluting the information
-		 * about previously queued, but not yet delivered,
-		 * faults.  See also do_general_protection below.
-		 */
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
-		    printk_ratelimit()) {
-			printk(KERN_INFO
-			       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
-			       tsk->comm, tsk->pid, str,
-			       regs->ip, regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
+	if (!user_mode(regs))
+		goto kernel_trap;
 
-		if (info)
-			force_sig_info(signr, info, tsk);
-		else
-			force_sig(signr, tsk);
-		return;
+	/*
+	 * We want error_code and trap_no set for userspace faults and
+	 * kernelspace faults which result in die(), but not
+	 * kernelspace faults which are fixed up.  die() gives the
+	 * process no chance to handle the signal and notice the
+	 * kernel fault information, so that won't result in polluting
+	 * the information about previously queued, but not yet
+	 * delivered, faults.  See also do_general_protection below.
+	 */
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = trapnr;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
+	    printk_ratelimit()) {
+		printk(KERN_INFO
+		       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
+		       tsk->comm, tsk->pid, str,
+		       regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
 	}
 
+	if (info)
+		force_sig_info(signr, info, tsk);
+	else
+		force_sig(signr, tsk);
+	return;
 
+kernel_trap:
 	if (!fixup_exception(regs)) {
 		tsk->thread.error_code = error_code;
 		tsk->thread.trap_no = trapnr;
@@ -650,41 +650,39 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 }
 
 #define DO_ERROR(trapnr, signr, str, name) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
+asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
+{									\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
 	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, NULL); \
+	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
 }
 
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	siginfo_t info; \
-	info.si_signo = signr; \
-	info.si_errno = 0; \
-	info.si_code = sicode; \
-	info.si_addr = (void __user *)siaddr; \
-	trace_hardirqs_fixup(); \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
+asmlinkage void do_##name(struct pt_regs * regs, long error_code)	\
+{									\
+	siginfo_t info;							\
+	info.si_signo = signr;						\
+	info.si_errno = 0;						\
+	info.si_code = sicode;						\
+	info.si_addr = (void __user *)siaddr;				\
+	trace_hardirqs_fixup();						\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+							== NOTIFY_STOP)	\
+		return;							\
 	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, &info); \
+	do_trap(trapnr, signr, str, regs, error_code, &info);		\
 }
 
-DO_ERROR_INFO( 0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
-DO_ERROR( 4, SIGSEGV, "overflow", overflow)
-DO_ERROR( 5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO( 6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
-DO_ERROR( 7, SIGSEGV, "device not available", device_not_available)
-DO_ERROR( 9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_ERROR(4, SIGSEGV, "overflow", overflow)
+DO_ERROR(5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
+DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
-DO_ERROR(18, SIGSEGV, "reserved", reserved)
 
 /* Runs on IST stack */
 asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
@@ -714,31 +712,34 @@ asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
 		die(str, regs, error_code);
 }
 
-asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
-						long error_code)
+asmlinkage void __kprobes
+do_general_protection(struct pt_regs *regs, long error_code)
 {
-	struct task_struct *tsk = current;
+	struct task_struct *tsk;
 
 	conditional_sti(regs);
 
-	if (user_mode(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = 13;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit()) {
-			printk(KERN_INFO
-		       "%s[%d] general protection ip:%lx sp:%lx error:%lx",
-			       tsk->comm, tsk->pid,
-			       regs->ip, regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
+	tsk = current;
+	if (!user_mode(regs))
+		goto gp_in_kernel;
 
-		force_sig(SIGSEGV, tsk);
-		return;
-	} 
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 13;
+
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+			printk_ratelimit()) {
+		printk(KERN_INFO
+			"%s[%d] general protection ip:%lx sp:%lx error:%lx",
+			tsk->comm, tsk->pid,
+			regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
+
+	force_sig(SIGSEGV, tsk);
+	return;
 
+gp_in_kernel:
 	if (fixup_exception(regs))
 		return;
 
@@ -751,14 +752,14 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 }
 
 static notrace __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs * regs)
+mem_parity_error(unsigned char reason, struct pt_regs *regs)
 {
 	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
 		reason);
 	printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
 
 #if defined(CONFIG_EDAC)
-	if(edac_handler_set()) {
+	if (edac_handler_set()) {
 		edac_atomic_assert_error();
 		return;
 	}
@@ -775,7 +776,7 @@ mem_parity_error(unsigned char reason, struct pt_regs * regs)
 }
 
 static notrace __kprobes void
-io_check_error(unsigned char reason, struct pt_regs * regs)
+io_check_error(unsigned char reason, struct pt_regs *regs)
 {
 	printk("NMI: IOCK error (debug interrupt?)\n");
 	show_registers(regs);
@@ -805,14 +806,14 @@ unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
 
 /* Runs on IST stack. This code must keep interrupts off all the time.
    Nested NMIs are prevented by the CPU. */
-asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
+asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
 	int cpu;
 
 	cpu = smp_processor_id();
 
-	/* Only the BSP gets external NMIs from the system.  */
+	/* Only the BSP gets external NMIs from the system. */
 	if (!cpu)
 		reason = get_nmi_reason();
 
@@ -824,32 +825,57 @@ asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
 		 * Ok, so this is none of the documented NMI sources,
 		 * so it must be the NMI watchdog.
 		 */
-		if (nmi_watchdog_tick(regs,reason))
+		if (nmi_watchdog_tick(regs, reason))
 			return;
-		if (!do_nmi_callback(regs,cpu))
+		if (!do_nmi_callback(regs, cpu))
 			unknown_nmi_error(reason, regs);
 
 		return;
 	}
 	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return; 
+		return;
 
 	/* AK: following checks seem to be broken on modern chipsets. FIXME */
-
 	if (reason & 0x80)
 		mem_parity_error(reason, regs);
 	if (reason & 0x40)
 		io_check_error(reason, regs);
 }
 
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
+{
+	nmi_enter();
+
+	add_pda(__nmi_count, 1);
+
+	if (!ignore_nmis)
+		default_do_nmi(regs);
+
+	nmi_exit();
+}
+
+void stop_nmi(void)
+{
+	acpi_nmi_disable();
+	ignore_nmis++;
+}
+
+void restart_nmi(void)
+{
+	ignore_nmis--;
+	acpi_nmi_enable();
+}
+
 /* runs on IST stack. */
-asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
+asmlinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
 {
 	trace_hardirqs_fixup();
 
-	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
+	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
 		return;
-	}
+
 	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
 	preempt_conditional_cli(regs);
@@ -880,8 +906,8 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 				   unsigned long error_code)
 {
-	unsigned long condition;
 	struct task_struct *tsk = current;
+	unsigned long condition;
 	siginfo_t info;
 
 	trace_hardirqs_fixup();
@@ -902,21 +928,19 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 
 	/* Mask out spurious debug traps due to lazy DR7 setting */
 	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7) { 
+		if (!tsk->thread.debugreg7)
 			goto clear_dr7;
-		}
 	}
 
 	tsk->thread.debugreg6 = condition;
 
-
 	/*
 	 * Single-stepping through TF: make sure we ignore any events in
 	 * kernel space (but re-enable TF when returning to user mode).
 	 */
 	if (condition & DR_STEP) {
-                if (!user_mode(regs))
-                       goto clear_TF_reenable;
+		if (!user_mode(regs))
+			goto clear_TF_reenable;
 	}
 
 	/* Ok, finally something we can handle */
@@ -929,7 +953,7 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs,
 	force_sig_info(SIGTRAP, &info, tsk);
 
 clear_dr7:
-	set_debugreg(0UL, 7);
+	set_debugreg(0, 7);
 	preempt_conditional_cli(regs);
 	return;
 
@@ -937,6 +961,7 @@ clear_TF_reenable:
 	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
 	regs->flags &= ~X86_EFLAGS_TF;
 	preempt_conditional_cli(regs);
+	return;
 }
 
 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
@@ -959,7 +984,7 @@ static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
 asmlinkage void do_coprocessor_error(struct pt_regs *regs)
 {
 	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct * task;
+	struct task_struct *task;
 	siginfo_t info;
 	unsigned short cwd, swd;
 
@@ -992,30 +1017,30 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs)
 	cwd = get_fpu_cwd(task);
 	swd = get_fpu_swd(task);
 	switch (swd & ~cwd & 0x3f) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			/*
-			 * swd & 0x240 == 0x040: Stack Underflow
-			 * swd & 0x240 == 0x240: Stack Overflow
-			 * User must clear the SF bit (0x40) if set
-			 */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000: /* No unmasked exception */
+	default: /* Multiple exceptions */
+		break;
+	case 0x001: /* Invalid Op */
+		/*
+		 * swd & 0x240 == 0x040: Stack Underflow
+		 * swd & 0x240 == 0x240: Stack Overflow
+		 * User must clear the SF bit (0x40) if set
+		 */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
@@ -1028,7 +1053,7 @@ asmlinkage void bad_intr(void)
 asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
 {
 	void __user *ip = (void __user *)(regs->ip);
-	struct task_struct * task;
+	struct task_struct *task;
 	siginfo_t info;
 	unsigned short mxcsr;
 
@@ -1056,25 +1081,25 @@ asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
 	 */
 	mxcsr = get_fpu_mxcsr(task);
 	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000:
+	default:
+		break;
+	case 0x001: /* Invalid Op */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
@@ -1092,7 +1117,7 @@ asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
 }
 
 /*
- *  'math_state_restore()' saves the current math information in the
+ * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
  *
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
@@ -1117,7 +1142,7 @@ asmlinkage void math_state_restore(void)
 		local_irq_disable();
 	}
 
-	clts();			/* Allow maths ops (or we recurse) */
+	clts();				/* Allow maths ops (or we recurse) */
 	restore_fpu_checking(&me->thread.xstate->fxsave);
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
@@ -1126,64 +1151,61 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 
 void __init trap_init(void)
 {
-	set_intr_gate(0,&divide_error);
-	set_intr_gate_ist(1,&debug,DEBUG_STACK);
-	set_intr_gate_ist(2,&nmi,NMI_STACK);
- 	set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */
-	set_system_gate(4,&overflow);	/* int4 can be called from all */
-	set_intr_gate(5,&bounds);
-	set_intr_gate(6,&invalid_op);
-	set_intr_gate(7,&device_not_available);
-	set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK);
-	set_intr_gate(9,&coprocessor_segment_overrun);
-	set_intr_gate(10,&invalid_TSS);
-	set_intr_gate(11,&segment_not_present);
-	set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK);
-	set_intr_gate(13,&general_protection);
-	set_intr_gate(14,&page_fault);
-	set_intr_gate(15,&spurious_interrupt_bug);
-	set_intr_gate(16,&coprocessor_error);
-	set_intr_gate(17,&alignment_check);
+	set_intr_gate(0, &divide_error);
+	set_intr_gate_ist(1, &debug, DEBUG_STACK);
+	set_intr_gate_ist(2, &nmi, NMI_STACK);
+ 	set_system_gate_ist(3, &int3, DEBUG_STACK); /* int3 can be called from all */
+	set_system_gate(4, &overflow); /* int4 can be called from all */
+	set_intr_gate(5, &bounds);
+	set_intr_gate(6, &invalid_op);
+	set_intr_gate(7, &device_not_available);
+	set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
+	set_intr_gate(9, &coprocessor_segment_overrun);
+	set_intr_gate(10, &invalid_TSS);
+	set_intr_gate(11, &segment_not_present);
+	set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
+	set_intr_gate(13, &general_protection);
+	set_intr_gate(14, &page_fault);
+	set_intr_gate(15, &spurious_interrupt_bug);
+	set_intr_gate(16, &coprocessor_error);
+	set_intr_gate(17, &alignment_check);
 #ifdef CONFIG_X86_MCE
-	set_intr_gate_ist(18,&machine_check, MCE_STACK); 
+	set_intr_gate_ist(18, &machine_check, MCE_STACK);
 #endif
-	set_intr_gate(19,&simd_coprocessor_error);
+	set_intr_gate(19, &simd_coprocessor_error);
 
 #ifdef CONFIG_IA32_EMULATION
 	set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
 #endif
-       
 	/*
 	 * initialize the per thread extended state:
 	 */
-        init_thread_xstate();
+	init_thread_xstate();
 	/*
-	 * Should be a barrier for any external CPU state.
+	 * Should be a barrier for any external CPU state:
 	 */
 	cpu_init();
 }
 
-
 static int __init oops_setup(char *s)
-{ 
+{
 	if (!s)
 		return -EINVAL;
 	if (!strcmp(s, "panic"))
 		panic_on_oops = 1;
 	return 0;
-} 
+}
 early_param("oops", oops_setup);
 
 static int __init kstack_setup(char *s)
 {
 	if (!s)
 		return -EINVAL;
-	kstack_depth_to_print = simple_strtoul(s,NULL,0);
+	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
 	return 0;
 }
 early_param("kstack", kstack_setup);
 
-
 static int __init code_bytes_setup(char *s)
 {
 	code_bytes = simple_strtoul(s, NULL, 0);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
new file mode 100644
index 000000000000..3c36f92160c9
--- /dev/null
+++ b/arch/x86/kernel/tsc.c
@@ -0,0 +1,533 @@
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/cpufreq.h>
+#include <linux/dmi.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/percpu.h>
+
+#include <asm/hpet.h>
+#include <asm/timer.h>
+#include <asm/vgtod.h>
+#include <asm/time.h>
+#include <asm/delay.h>
+
+unsigned int cpu_khz;           /* TSC clocks / usec, not used here */
+EXPORT_SYMBOL(cpu_khz);
+unsigned int tsc_khz;
+EXPORT_SYMBOL(tsc_khz);
+
+/*
+ * TSC can be unstable due to cpufreq or due to unsynced TSCs
+ */
+static int tsc_unstable;
+
+/* native_sched_clock() is called before tsc_init(), so
+   we must start with the TSC soft disabled to prevent
+   erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+u64 native_sched_clock(void)
+{
+	u64 this_offset;
+
+	/*
+	 * Fall back to jiffies if there's no TSC available:
+	 * ( But note that we still use it if the TSC is marked
+	 *   unstable. We do this because unlike Time Of Day,
+	 *   the scheduler clock tolerates small errors and it's
+	 *   very important for it to be as fast as the platform
+	 *   can achive it. )
+	 */
+	if (unlikely(tsc_disabled)) {
+		/* No locking but a rare wrong value is not a big deal: */
+		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
+	}
+
+	/* read the Time Stamp Counter: */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return cycles_2_ns(this_offset);
+}
+
+/* We need to define a real function for sched_clock, to override the
+   weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+	return paravirt_sched_clock();
+}
+#else
+unsigned long long
+sched_clock(void) __attribute__((alias("native_sched_clock")));
+#endif
+
+int check_tsc_unstable(void)
+{
+	return tsc_unstable;
+}
+EXPORT_SYMBOL_GPL(check_tsc_unstable);
+
+#ifdef CONFIG_X86_TSC
+int __init notsc_setup(char *str)
+{
+	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+			"cannot disable TSC completely.\n");
+	tsc_disabled = 1;
+	return 1;
+}
+#else
+/*
+ * disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c
+ */
+int __init notsc_setup(char *str)
+{
+	setup_clear_cpu_cap(X86_FEATURE_TSC);
+	return 1;
+}
+#endif
+
+__setup("notsc", notsc_setup);
+
+#define MAX_RETRIES     5
+#define SMI_TRESHOLD    50000
+
+/*
+ * Read TSC and the reference counters. Take care of SMI disturbance
+ */
+static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+{
+	u64 t1, t2;
+	int i;
+
+	for (i = 0; i < MAX_RETRIES; i++) {
+		t1 = get_cycles();
+		if (hpet)
+			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+		else
+			*pm = acpi_pm_read_early();
+		t2 = get_cycles();
+		if ((t2 - t1) < SMI_TRESHOLD)
+			return t2;
+	}
+	return ULLONG_MAX;
+}
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+	unsigned long flags;
+	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
+	int hpet = is_hpet_enabled();
+	unsigned int tsc_khz_val = 0;
+
+	local_irq_save(flags);
+
+	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	outb(0xb0, 0x43);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+	tr1 = get_cycles();
+	while ((inb(0x61) & 0x20) == 0);
+	tr2 = get_cycles();
+
+	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+
+	local_irq_restore(flags);
+
+	/*
+	 * Preset the result with the raw and inaccurate PIT
+	 * calibration value
+	 */
+	delta = (tr2 - tr1);
+	do_div(delta, 50);
+	tsc_khz_val = delta;
+
+	/* hpet or pmtimer available ? */
+	if (!hpet && !pm1 && !pm2) {
+		printk(KERN_INFO "TSC calibrated against PIT\n");
+		goto out;
+	}
+
+	/* Check, whether the sampling was disturbed by an SMI */
+	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
+		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
+				"using PIT calibration result\n");
+		goto out;
+	}
+
+	tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+	if (hpet) {
+		printk(KERN_INFO "TSC calibrated against HPET\n");
+		if (hpet2 < hpet1)
+			hpet2 += 0x100000000ULL;
+		hpet2 -= hpet1;
+		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+		do_div(tsc1, 1000000);
+	} else {
+		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
+		if (pm2 < pm1)
+			pm2 += (u64)ACPI_PM_OVRRUN;
+		pm2 -= pm1;
+		tsc1 = pm2 * 1000000000LL;
+		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	}
+
+	do_div(tsc2, tsc1);
+	tsc_khz_val = tsc2;
+
+out:
+	return tsc_khz_val;
+}
+
+
+#ifdef CONFIG_X86_32
+/* Only called from the Powernow K7 cpu freq driver */
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+	unsigned long cpu_khz_old = cpu_khz;
+
+	if (cpu_has_tsc) {
+		tsc_khz = calibrate_tsc();
+		cpu_khz = tsc_khz;
+		cpu_data(0).loops_per_jiffy =
+			cpufreq_scale(cpu_data(0).loops_per_jiffy,
+					cpu_khz_old, cpu_khz);
+		return 0;
+	} else
+		return -ENODEV;
+#else
+	return -ENODEV;
+#endif
+}
+
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
+#endif /* CONFIG_X86_32 */
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *              ns = cycles / (freq / ns_per_sec)
+ *              ns = cycles * (ns_per_sec / freq)
+ *              ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *              ns = cycles * (10^6 / cpu_khz)
+ *
+ *      Then we use scaling math (suggested by george@mvista.com) to get:
+ *              ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *              ns = cycles * cyc2ns_scale / SC
+ *
+ *      And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+DEFINE_PER_CPU(unsigned long, cyc2ns);
+
+static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+{
+	unsigned long long tsc_now, ns_now;
+	unsigned long flags, *scale;
+
+	local_irq_save(flags);
+	sched_clock_idle_sleep_event();
+
+	scale = &per_cpu(cyc2ns, cpu);
+
+	rdtscll(tsc_now);
+	ns_now = __cycles_2_ns(tsc_now);
+
+	if (cpu_khz)
+		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+
+	sched_clock_idle_wakeup_event(0);
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
+ * changes.
+ *
+ * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
+ * not that important because current Opteron setups do not support
+ * scaling on SMP anyroads.
+ *
+ * Should fix up last_tsc too. Currently gettimeofday in the
+ * first tick after the change will be slightly wrong.
+ */
+
+static unsigned int  ref_freq;
+static unsigned long loops_per_jiffy_ref;
+static unsigned long tsc_khz_ref;
+
+static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+				void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	unsigned long *lpj, dummy;
+
+	if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
+		return 0;
+
+	lpj = &dummy;
+	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+#ifdef CONFIG_SMP
+		lpj = &cpu_data(freq->cpu).loops_per_jiffy;
+#else
+	lpj = &boot_cpu_data.loops_per_jiffy;
+#endif
+
+	if (!ref_freq) {
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = *lpj;
+		tsc_khz_ref = tsc_khz;
+	}
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+			(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+			(val == CPUFREQ_RESUMECHANGE)) {
+		*lpj = 	cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+
+		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			mark_tsc_unstable("cpufreq changes");
+	}
+
+	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+
+	return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+	.notifier_call  = time_cpufreq_notifier
+};
+
+static int __init cpufreq_tsc(void)
+{
+	cpufreq_register_notifier(&time_cpufreq_notifier_block,
+				CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(cpufreq_tsc);
+
+#endif /* CONFIG_CPU_FREQ */
+
+/* clocksource code */
+
+static struct clocksource clocksource_tsc;
+
+/*
+ * We compare the TSC to the cycle_last value in the clocksource
+ * structure to avoid a nasty time-warp. This can be observed in a
+ * very small window right after one CPU updated cycle_last under
+ * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
+ * is smaller than the cycle_last reference value due to a TSC which
+ * is slighty behind. This delta is nowhere else observable, but in
+ * that case it results in a forward time jump in the range of hours
+ * due to the unsigned delta calculation of the time keeping core
+ * code, which is necessary to support wrapping clocksources like pm
+ * timer.
+ */
+static cycle_t read_tsc(void)
+{
+	cycle_t ret = (cycle_t)get_cycles();
+
+	return ret >= clocksource_tsc.cycle_last ?
+		ret : clocksource_tsc.cycle_last;
+}
+
+static cycle_t __vsyscall_fn vread_tsc(void)
+{
+	cycle_t ret = (cycle_t)vget_cycles();
+
+	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
+		ret : __vsyscall_gtod_data.clock.cycle_last;
+}
+
+static struct clocksource clocksource_tsc = {
+	.name                   = "tsc",
+	.rating                 = 300,
+	.read                   = read_tsc,
+	.mask                   = CLOCKSOURCE_MASK(64),
+	.shift                  = 22,
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS |
+				  CLOCK_SOURCE_MUST_VERIFY,
+#ifdef CONFIG_X86_64
+	.vread                  = vread_tsc,
+#endif
+};
+
+void mark_tsc_unstable(char *reason)
+{
+	if (!tsc_unstable) {
+		tsc_unstable = 1;
+		printk("Marking TSC unstable due to %s\n", reason);
+		/* Change only the rating, when not registered */
+		if (clocksource_tsc.mult)
+			clocksource_change_rating(&clocksource_tsc, 0);
+		else
+			clocksource_tsc.rating = 0;
+	}
+}
+
+EXPORT_SYMBOL_GPL(mark_tsc_unstable);
+
+static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
+			d->ident);
+	tsc_unstable = 1;
+	return 0;
+}
+
+/* List of systems that have known TSC problems */
+static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
+	{
+		.callback = dmi_mark_tsc_unstable,
+		.ident = "IBM Thinkpad 380XD",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
+		},
+	},
+	{}
+};
+
+/*
+ * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
+ */
+#ifdef CONFIG_MGEODE_LX
+/* RTSC counts during suspend */
+#define RTSC_SUSP 0x100
+
+static void __init check_geode_tsc_reliable(void)
+{
+	unsigned long res_low, res_high;
+
+	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+	if (res_low & RTSC_SUSP)
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+}
+#else
+static inline void check_geode_tsc_reliable(void) { }
+#endif
+
+/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+__cpuinit int unsynchronized_tsc(void)
+{
+	if (!cpu_has_tsc || tsc_unstable)
+		return 1;
+
+#ifdef CONFIG_SMP
+	if (apic_is_clustered_box())
+		return 1;
+#endif
+
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
+	/*
+	 * Intel systems are normally all synchronized.
+	 * Exceptions must mark TSC as unstable:
+	 */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
+		/* assume multi socket systems are not synchronized: */
+		if (num_possible_cpus() > 1)
+			tsc_unstable = 1;
+	}
+
+	return tsc_unstable;
+}
+
+static void __init init_tsc_clocksource(void)
+{
+	clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
+			clocksource_tsc.shift);
+	/* lower the rating if we already know its unstable: */
+	if (check_tsc_unstable()) {
+		clocksource_tsc.rating = 0;
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+	}
+	clocksource_register(&clocksource_tsc);
+}
+
+void __init tsc_init(void)
+{
+	u64 lpj;
+	int cpu;
+
+	if (!cpu_has_tsc)
+		return;
+
+	tsc_khz = calibrate_tsc();
+	cpu_khz = tsc_khz;
+
+	if (!tsc_khz) {
+		mark_tsc_unstable("could not calculate TSC khz");
+		return;
+	}
+
+#ifdef CONFIG_X86_64
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
+			(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
+		cpu_khz = calibrate_cpu();
+#endif
+
+	lpj = ((u64)tsc_khz * 1000);
+	do_div(lpj, HZ);
+	lpj_fine = lpj;
+
+	printk("Detected %lu.%03lu MHz processor.\n",
+			(unsigned long)cpu_khz / 1000,
+			(unsigned long)cpu_khz % 1000);
+
+	/*
+	 * Secondary CPUs do not run through tsc_init(), so set up
+	 * all the scale factors for all CPUs, assuming the same
+	 * speed as the bootup CPU. (cpufreq notifiers will fix this
+	 * up if their speed diverges)
+	 */
+	for_each_possible_cpu(cpu)
+		set_cyc2ns_scale(cpu_khz, cpu);
+
+	if (tsc_disabled > 0)
+		return;
+
+	/* now allow native_sched_clock() to use rdtsc */
+	tsc_disabled = 0;
+
+	use_tsc_delay();
+	/* Check and install the TSC clocksource */
+	dmi_check_system(bad_tsc_dmi_table);
+
+	if (unsynchronized_tsc())
+		mark_tsc_unstable("TSCs unsynchronized");
+
+	check_geode_tsc_reliable();
+	init_tsc_clocksource();
+}
+
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
deleted file mode 100644
index 65b70637ad97..000000000000
--- a/arch/x86/kernel/tsc_32.c
+++ /dev/null
@@ -1,451 +0,0 @@
-#include <linux/sched.h>
-#include <linux/clocksource.h>
-#include <linux/workqueue.h>
-#include <linux/cpufreq.h>
-#include <linux/jiffies.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/percpu.h>
-
-#include <asm/delay.h>
-#include <asm/tsc.h>
-#include <asm/io.h>
-#include <asm/timer.h>
-
-#include "mach_timer.h"
-
-/* native_sched_clock() is called before tsc_init(), so
-   we must start with the TSC soft disabled to prevent
-   erroneous rdtsc usage on !cpu_has_tsc processors */
-static int tsc_disabled = -1;
-
-/*
- * On some systems the TSC frequency does not
- * change with the cpu frequency. So we need
- * an extra value to store the TSC freq
- */
-unsigned int tsc_khz;
-EXPORT_SYMBOL_GPL(tsc_khz);
-
-#ifdef CONFIG_X86_TSC
-static int __init tsc_setup(char *str)
-{
-	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-	       "cannot disable TSC completely.\n");
-	tsc_disabled = 1;
-	return 1;
-}
-#else
-/*
- * disable flag for tsc. Takes effect by clearing the TSC cpu flag
- * in cpu/common.c
- */
-static int __init tsc_setup(char *str)
-{
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
-	return 1;
-}
-#endif
-
-__setup("notsc", tsc_setup);
-
-/*
- * code to mark and check if the TSC is unstable
- * due to cpufreq or due to unsynced TSCs
- */
-static int tsc_unstable;
-
-int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-EXPORT_SYMBOL_GPL(check_tsc_unstable);
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz)
-		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
-
-	/*
-	 * Start smoothly with the new frequency:
-	 */
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long native_sched_clock(void)
-{
-	unsigned long long this_offset;
-
-	/*
-	 * Fall back to jiffies if there's no TSC available:
-	 * ( But note that we still use it if the TSC is marked
-	 *   unstable. We do this because unlike Time Of Day,
-	 *   the scheduler clock tolerates small errors and it's
-	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
-	 */
-	if (unlikely(tsc_disabled))
-		/* No locking but a rare wrong value is not a big deal: */
-		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
-
-	/* read the Time Stamp Counter: */
-	rdtscll(this_offset);
-
-	/* return the value in ns */
-	return cycles_2_ns(this_offset);
-}
-
-/* We need to define a real function for sched_clock, to override the
-   weak default version */
-#ifdef CONFIG_PARAVIRT
-unsigned long long sched_clock(void)
-{
-	return paravirt_sched_clock();
-}
-#else
-unsigned long long sched_clock(void)
-	__attribute__((alias("native_sched_clock")));
-#endif
-
-unsigned long native_calculate_cpu_khz(void)
-{
-	unsigned long long start, end;
-	unsigned long count;
-	u64 delta64 = (u64)ULLONG_MAX;
-	int i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/* run 3 times to ensure the cache is warm and to get an accurate reading */
-	for (i = 0; i < 3; i++) {
-		mach_prepare_counter();
-		rdtscll(start);
-		mach_countup(&count);
-		rdtscll(end);
-
-		/*
-		 * Error: ECTCNEVERSET
-		 * The CTC wasn't reliable: we got a hit on the very first read,
-		 * or the CPU was so fast/slow that the quotient wouldn't fit in
-		 * 32 bits..
-		 */
-		if (count <= 1)
-			continue;
-
-		/* cpu freq too slow: */
-		if ((end - start) <= CALIBRATE_TIME_MSEC)
-			continue;
-
-		/*
-		 * We want the minimum time of all runs in case one of them
-		 * is inaccurate due to SMI or other delay
-		 */
-		delta64 = min(delta64, (end - start));
-	}
-
-	/* cpu freq too fast (or every run was bad): */
-	if (delta64 > (1ULL<<32))
-		goto err;
-
-	delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
-	do_div(delta64,CALIBRATE_TIME_MSEC);
-
-	local_irq_restore(flags);
-	return (unsigned long)delta64;
-err:
-	local_irq_restore(flags);
-	return 0;
-}
-
-int recalibrate_cpu_khz(void)
-{
-#ifndef CONFIG_SMP
-	unsigned long cpu_khz_old = cpu_khz;
-
-	if (cpu_has_tsc) {
-		cpu_khz = calculate_cpu_khz();
-		tsc_khz = cpu_khz;
-		cpu_data(0).loops_per_jiffy =
-			cpufreq_scale(cpu_data(0).loops_per_jiffy,
-					cpu_khz_old, cpu_khz);
-		return 0;
-	} else
-		return -ENODEV;
-#else
-	return -ENODEV;
-#endif
-}
-
-EXPORT_SYMBOL(recalibrate_cpu_khz);
-
-#ifdef CONFIG_CPU_FREQ
-
-/*
- * if the CPU frequency is scaled, TSC-based delays will need a different
- * loops_per_jiffy value to function properly.
- */
-static unsigned int ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long cpu_khz_ref;
-
-static int
-time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	if (!ref_freq) {
-		if (!freq->old){
-			ref_freq = freq->new;
-			return 0;
-		}
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = cpu_data(freq->cpu).loops_per_jiffy;
-		cpu_khz_ref = cpu_khz;
-	}
-
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-	    (val == CPUFREQ_RESUMECHANGE)) {
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			cpu_data(freq->cpu).loops_per_jiffy =
-				cpufreq_scale(loops_per_jiffy_ref,
-						ref_freq, freq->new);
-
-		if (cpu_khz) {
-
-			if (num_online_cpus() == 1)
-				cpu_khz = cpufreq_scale(cpu_khz_ref,
-						ref_freq, freq->new);
-			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
-				tsc_khz = cpu_khz;
-				set_cyc2ns_scale(cpu_khz, freq->cpu);
-				/*
-				 * TSC based sched_clock turns
-				 * to junk w/ cpufreq
-				 */
-				mark_tsc_unstable("cpufreq changes");
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call	= time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	return cpufreq_register_notifier(&time_cpufreq_notifier_block,
-					 CPUFREQ_TRANSITION_NOTIFIER);
-}
-core_initcall(cpufreq_tsc);
-
-#endif
-
-/* clock source code */
-
-static unsigned long current_tsc_khz;
-static struct clocksource clocksource_tsc;
-
-/*
- * We compare the TSC to the cycle_last value in the clocksource
- * structure to avoid a nasty time-warp issue. This can be observed in
- * a very small window right after one CPU updated cycle_last under
- * xtime lock and the other CPU reads a TSC value which is smaller
- * than the cycle_last reference value due to a TSC which is slighty
- * behind. This delta is nowhere else observable, but in that case it
- * results in a forward time jump in the range of hours due to the
- * unsigned delta calculation of the time keeping core code, which is
- * necessary to support wrapping clocksources like pm timer.
- */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret;
-
-	rdtscll(ret);
-
-	return ret >= clocksource_tsc.cycle_last ?
-		ret : clocksource_tsc.cycle_last;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.mult			= 0, /* to be set */
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to: %s.\n", reason);
-		/* Can be called before registration */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
-	       d->ident);
-	tsc_unstable = 1;
-	return 0;
-}
-
-/* List of systems that have known TSC problems */
-static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
-	{
-	 .callback = dmi_mark_tsc_unstable,
-	 .ident = "IBM Thinkpad 380XD",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
-		     },
-	 },
-	 {}
-};
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (!cpu_has_tsc || tsc_unstable)
-		return 1;
-
-	/* Anything with constant TSC should be synchronized */
-	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	/*
-	 * Intel systems are normally all synchronized.
-	 * Exceptions must mark TSC as unstable:
-	 */
-	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
-		/* assume multi socket systems are not synchronized: */
-		if (num_possible_cpus() > 1)
-			tsc_unstable = 1;
-	}
-	return tsc_unstable;
-}
-
-/*
- * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
- */
-#ifdef CONFIG_MGEODE_LX
-/* RTSC counts during suspend */
-#define RTSC_SUSP 0x100
-
-static void __init check_geode_tsc_reliable(void)
-{
-	unsigned long res_low, res_high;
-
-	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
-	if (res_low & RTSC_SUSP)
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
-}
-#else
-static inline void check_geode_tsc_reliable(void) { }
-#endif
-
-
-void __init tsc_init(void)
-{
-	int cpu;
-
-	if (!cpu_has_tsc || tsc_disabled > 0)
-		return;
-
-	cpu_khz = calculate_cpu_khz();
-	tsc_khz = cpu_khz;
-
-	if (!cpu_khz) {
-		mark_tsc_unstable("could not calculate TSC khz");
-		return;
-	}
-
-	/* now allow native_sched_clock() to use rdtsc */
-	tsc_disabled = 0;
-
-	printk("Detected %lu.%03lu MHz processor.\n",
-				(unsigned long)cpu_khz / 1000,
-				(unsigned long)cpu_khz % 1000);
-
-	/*
-	 * Secondary CPUs do not run through tsc_init(), so set up
-	 * all the scale factors for all CPUs, assuming the same
-	 * speed as the bootup CPU. (cpufreq notifiers will fix this
-	 * up if their speed diverges)
-	 */
-	for_each_possible_cpu(cpu)
-		set_cyc2ns_scale(cpu_khz, cpu);
-
-	use_tsc_delay();
-
-	/* Check and install the TSC clocksource */
-	dmi_check_system(bad_tsc_dmi_table);
-
-	unsynchronized_tsc();
-	check_geode_tsc_reliable();
-	current_tsc_khz = tsc_khz;
-	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
-							clocksource_tsc.shift);
-	/* lower the rating if we already know its unstable: */
-	if (check_tsc_unstable()) {
-		clocksource_tsc.rating = 0;
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-	}
-	clocksource_register(&clocksource_tsc);
-}
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
deleted file mode 100644
index 1784b8077a12..000000000000
--- a/arch/x86/kernel/tsc_64.c
+++ /dev/null
@@ -1,357 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/acpi.h>
-#include <linux/cpufreq.h>
-#include <linux/acpi_pmtmr.h>
-
-#include <asm/hpet.h>
-#include <asm/timex.h>
-#include <asm/timer.h>
-#include <asm/vgtod.h>
-
-static int notsc __initdata = 0;
-
-unsigned int cpu_khz;		/* TSC clocks / usec, not used here */
-EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
-EXPORT_SYMBOL(tsc_khz);
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz)
-		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
-
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
-unsigned long long native_sched_clock(void)
-{
-	unsigned long a = 0;
-
-	/* Could do CPU core sync here. Opteron can execute rdtsc speculatively,
-	 * which means it is not completely exact and may not be monotonous
-	 * between CPUs. But the errors should be too small to matter for
-	 * scheduling purposes.
-	 */
-
-	rdtscll(a);
-	return cycles_2_ns(a);
-}
-
-/* We need to define a real function for sched_clock, to override the
-   weak default version */
-#ifdef CONFIG_PARAVIRT
-unsigned long long sched_clock(void)
-{
-	return paravirt_sched_clock();
-}
-#else
-unsigned long long
-sched_clock(void) __attribute__((alias("native_sched_clock")));
-#endif
-
-
-static int tsc_unstable;
-
-int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-EXPORT_SYMBOL_GPL(check_tsc_unstable);
-
-#ifdef CONFIG_CPU_FREQ
-
-/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
- * changes.
- *
- * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
- * not that important because current Opteron setups do not support
- * scaling on SMP anyroads.
- *
- * Should fix up last_tsc too. Currently gettimeofday in the
- * first tick after the change will be slightly wrong.
- */
-
-static unsigned int  ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long tsc_khz_ref;
-
-static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-				 void *data)
-{
-	struct cpufreq_freqs *freq = data;
-	unsigned long *lpj, dummy;
-
-	if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	lpj = &dummy;
-	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-#ifdef CONFIG_SMP
-		lpj = &cpu_data(freq->cpu).loops_per_jiffy;
-#else
-		lpj = &boot_cpu_data.loops_per_jiffy;
-#endif
-
-	if (!ref_freq) {
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = *lpj;
-		tsc_khz_ref = tsc_khz;
-	}
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-		(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-		(val == CPUFREQ_RESUMECHANGE)) {
-		*lpj =
-		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-
-		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			mark_tsc_unstable("cpufreq changes");
-	}
-
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call  = time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	cpufreq_register_notifier(&time_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-	return 0;
-}
-
-core_initcall(cpufreq_tsc);
-
-#endif
-
-#define MAX_RETRIES	5
-#define SMI_TRESHOLD	50000
-
-/*
- * Read TSC and the reference counters. Take care of SMI disturbance
- */
-static unsigned long __init tsc_read_refs(unsigned long *pm,
-					  unsigned long *hpet)
-{
-	unsigned long t1, t2;
-	int i;
-
-	for (i = 0; i < MAX_RETRIES; i++) {
-		t1 = get_cycles();
-		if (hpet)
-			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
-		else
-			*pm = acpi_pm_read_early();
-		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
-			return t2;
-	}
-	return ULONG_MAX;
-}
-
-/**
- * tsc_calibrate - calibrate the tsc on boot
- */
-void __init tsc_calibrate(void)
-{
-	unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled(), cpu;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	outb(0xb0, 0x43);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
-
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
-	local_irq_restore(flags);
-
-	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
-	 */
-	tsc_khz = (tr2 - tr1) / 50;
-
-	/* hpet or pmtimer available ? */
-	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
-	}
-
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-		       "using PIT calibration result\n");
-		goto out;
-	}
-
-	tsc2 = (tsc2 - tsc1) * 1000000L;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000;
-		hpet2 -= hpet1;
-		tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000;
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC;
-	}
-
-	tsc_khz = tsc2 / tsc1;
-
-out:
-	for_each_possible_cpu(cpu)
-		set_cyc2ns_scale(tsc_khz, cpu);
-}
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (tsc_unstable)
-		return 1;
-
-#ifdef CONFIG_SMP
-	if (apic_is_clustered_box())
-		return 1;
-#endif
-
-	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	/* Assume multi socket systems are not synchronized */
-	return num_present_cpus() > 1;
-}
-
-int __init notsc_setup(char *s)
-{
-	notsc = 1;
-	return 1;
-}
-
-__setup("notsc", notsc_setup);
-
-static struct clocksource clocksource_tsc;
-
-/*
- * We compare the TSC to the cycle_last value in the clocksource
- * structure to avoid a nasty time-warp. This can be observed in a
- * very small window right after one CPU updated cycle_last under
- * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
- * is smaller than the cycle_last reference value due to a TSC which
- * is slighty behind. This delta is nowhere else observable, but in
- * that case it results in a forward time jump in the range of hours
- * due to the unsigned delta calculation of the time keeping core
- * code, which is necessary to support wrapping clocksources like pm
- * timer.
- */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret = (cycle_t)get_cycles();
-
-	return ret >= clocksource_tsc.cycle_last ?
-		ret : clocksource_tsc.cycle_last;
-}
-
-static cycle_t __vsyscall_fn vread_tsc(void)
-{
-	cycle_t ret = (cycle_t)vget_cycles();
-
-	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
-		ret : __vsyscall_gtod_data.clock.cycle_last;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-	.vread			= vread_tsc,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
-		/* Change only the rating, when not registered */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-void __init init_tsc_clocksource(void)
-{
-	if (!notsc) {
-		clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
-							clocksource_tsc.shift);
-		if (check_tsc_unstable())
-			clocksource_tsc.rating = 0;
-
-		clocksource_register(&clocksource_tsc);
-	}
-}
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
new file mode 100644
index 000000000000..e94bdb6add1d
--- /dev/null
+++ b/arch/x86/kernel/visws_quirks.c
@@ -0,0 +1,709 @@
+/*
+ *  SGI Visual Workstation support and quirks, unmaintained.
+ *
+ *  Split out from setup.c by davej@suse.de
+ *
+ *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ *  SGI Visual Workstation interrupt controller
+ *
+ *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ *  which serves as the main interrupt controller in the system.  Non-legacy
+ *  hardware in the system uses this controller directly.  Legacy devices
+ *  are connected to the PIIX4 which in turn has its 8259(s) connected to
+ *  a of the Cobalt APIC entry.
+ *
+ *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/visws/cobalt.h>
+#include <asm/visws/piix4.h>
+#include <asm/arch_hooks.h>
+#include <asm/fixmap.h>
+#include <asm/reboot.h>
+#include <asm/setup.h>
+#include <asm/e820.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+
+#include <mach_ipi.h>
+
+#include "mach_apic.h"
+
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+#include <asm/visws/piix4.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+extern int no_broadcast;
+
+#include <asm/io.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
+
+char visws_board_type	= -1;
+char visws_board_rev	= -1;
+
+int is_visws_box(void)
+{
+	return visws_board_type >= 0;
+}
+
+static int __init visws_time_init_quirk(void)
+{
+	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
+
+	/* Set the countdown value */
+	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
+
+	/* Start the timer */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
+
+	/* Enable (unmask) the timer interrupt */
+	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
+
+	/*
+	 * Zero return means the generic timer setup code will set up
+	 * the standard vector:
+	 */
+	return 0;
+}
+
+static int __init visws_pre_intr_init_quirk(void)
+{
+	init_VISWS_APIC_irqs();
+
+	/*
+	 * We dont want ISA irqs to be set up by the generic code:
+	 */
+	return 1;
+}
+
+/* Quirk for machine specific memory setup. */
+
+#define MB (1024 * 1024)
+
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
+EXPORT_SYMBOL(sgivwfb_mem_phys);
+EXPORT_SYMBOL(sgivwfb_mem_size);
+
+long long mem_size __initdata = 0;
+
+static char * __init visws_memory_setup_quirk(void)
+{
+	long long gfx_mem_size = 8 * MB;
+
+	mem_size = boot_params.alt_mem_k;
+
+	if (!mem_size) {
+		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
+		mem_size = 128 * MB;
+	}
+
+	/*
+	 * this hardcodes the graphics memory to 8 MB
+	 * it really should be sized dynamically (or at least
+	 * set as a boot param)
+	 */
+	if (!sgivwfb_mem_size) {
+		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
+		sgivwfb_mem_size = 8 * MB;
+	}
+
+	/*
+	 * Trim to nearest MB
+	 */
+	sgivwfb_mem_size &= ~((1 << 20) - 1);
+	sgivwfb_mem_phys = mem_size - gfx_mem_size;
+
+	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
+	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
+
+	return "PROM";
+}
+
+static void visws_machine_emergency_restart(void)
+{
+	/*
+	 * Visual Workstations restart after this
+	 * register is poked on the PIIX4
+	 */
+	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+static void visws_machine_power_off(void)
+{
+	unsigned short pm_status;
+/*	extern unsigned int pci_bus0; */
+
+	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
+		outw(pm_status, PMSTS_PORT);
+
+	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+	mdelay(10);
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+/*	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
+	outl(PIIX_SPECIAL_STOP, 0xCFC);
+}
+
+static int __init visws_get_smp_config_quirk(unsigned int early)
+{
+	/*
+	 * Prevent MP-table parsing by the generic code:
+	 */
+	return 1;
+}
+
+extern unsigned int __cpuinitdata maxcpus;
+
+/*
+ * The Visual Workstation is Intel MP compliant in the hardware
+ * sense, but it doesn't have a BIOS(-configuration table).
+ * No problem for Linux.
+ */
+
+static void __init MP_processor_info (struct mpc_config_processor *m)
+{
+	int ver, logical_apicid;
+	physid_mask_t apic_cpus;
+
+	if (!(m->mpc_cpuflag & CPU_ENABLED))
+		return;
+
+	logical_apicid = m->mpc_apicid;
+	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
+	       m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver);
+
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
+		boot_cpu_physical_apicid = m->mpc_apicid;
+
+	ver = m->mpc_apicver;
+	if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
+		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
+			m->mpc_apicid, MAX_APICS);
+		return;
+	}
+
+	apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
+	/*
+	 * Validate version
+	 */
+	if (ver == 0x0) {
+		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
+			"fixing up to 0x10. (tell your hw vendor)\n",
+			m->mpc_apicid);
+		ver = 0x10;
+	}
+	apic_version[m->mpc_apicid] = ver;
+}
+
+int __init visws_find_smp_config_quirk(unsigned int reserve)
+{
+	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
+	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
+
+	if (ncpus > CO_CPU_MAX) {
+		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
+			ncpus, mp);
+
+		ncpus = CO_CPU_MAX;
+	}
+
+	if (ncpus > maxcpus)
+		ncpus = maxcpus;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	smp_found_config = 1;
+#endif
+	while (ncpus--)
+		MP_processor_info(mp++);
+
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	return 1;
+}
+
+extern int visws_trap_init_quirk(void);
+
+void __init visws_early_detect(void)
+{
+	int raw;
+
+	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
+							 >> PIIX_GPI_BD_SHIFT;
+
+	if (visws_board_type < 0)
+		return;
+
+	/*
+	 * Install special quirks for timer, interrupt and memory setup:
+	 */
+	arch_time_init_quirk		= visws_time_init_quirk;
+	arch_pre_intr_init_quirk	= visws_pre_intr_init_quirk;
+	arch_memory_setup_quirk		= visws_memory_setup_quirk;
+
+	/*
+	 * Fall back to generic behavior for traps:
+	 */
+	arch_intr_init_quirk		= NULL;
+	arch_trap_init_quirk		= visws_trap_init_quirk;
+
+	/*
+	 * Install reboot quirks:
+	 */
+	pm_power_off			= visws_machine_power_off;
+	machine_ops.emergency_restart	= visws_machine_emergency_restart;
+
+	/*
+	 * Do not use broadcast IPIs:
+	 */
+	no_broadcast = 0;
+
+	/*
+	 * Override generic MP-table parsing:
+	 */
+	mach_get_smp_config_quirk	= visws_get_smp_config_quirk;
+	mach_find_smp_config_quirk	= visws_find_smp_config_quirk;
+
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Turn off IO-APIC detection and initialization:
+	 */
+	skip_ioapic_setup		= 1;
+#endif
+
+	/*
+	 * Get Board rev.
+	 * First, we have to initialize the 307 part to allow us access
+	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
+	 * after the PIIX4 PM section.
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
+
+	/*
+	 * Now, we have to map the power management section to write
+	 * a bit which enables access to the GPIO registers.
+	 * What lunatic came up with this shit?
+	 */
+	outb_p(SIO_DEV_SEL, SIO_INDEX);
+	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
+
+	outb_p(SIO_DEV_MSB, SIO_INDEX);
+	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
+
+	outb_p(SIO_DEV_LSB, SIO_INDEX);
+	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
+
+	outb_p(SIO_DEV_ENB, SIO_INDEX);
+	outb_p(1, SIO_DATA);		/* Enable PM registers. */
+
+	/*
+	 * Now, write the PM register which enables the GPIO registers.
+	 */
+	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
+	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
+
+	/*
+	 * Now, initialize the GPIO registers.
+	 * We want them all to be inputs which is the
+	 * power on default, so let's leave them alone.
+	 * So, let's just read the board rev!
+	 */
+	raw = inb_p(SIO_GP_DATA1);
+	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
+
+	if (visws_board_type == VISWS_320) {
+		if (raw < 0x6) {
+			visws_board_rev = 4;
+		} else if (raw < 0xc) {
+			visws_board_rev = 5;
+		} else {
+			visws_board_rev = 6;
+		}
+	} else if (visws_board_type == VISWS_540) {
+			visws_board_rev = 2;
+		} else {
+			visws_board_rev = raw;
+		}
+
+	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
+	       (visws_board_type == VISWS_320 ? "320" :
+	       (visws_board_type == VISWS_540 ? "540" :
+		"unknown")), visws_board_rev);
+}
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+/*		panic("This machine is not SGI Visual Workstation 320/540"); */
+	}
+
+	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+	/*
+	 * On normal SMP PC this is used only with SMP, but we have to
+	 * use it and set it up here to start the Cobalt clock
+	 */
+	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+	setup_local_APIC();
+	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+		(unsigned int)apic_read(APIC_LVR),
+		(unsigned int)apic_read(APIC_ID));
+
+	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+	/* Enable Cobalt APIC being careful to NOT change the ID! */
+	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+		co_apic_read(CO_APIC_ID));
+}
+
+int __init visws_trap_init_quirk(void)
+{
+	lithium_init();
+	cobalt_init();
+
+	return 1;
+}
+
+/*
+ * IRQ controller / APIC support:
+ */
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+	co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+	extern char visws_board_type;
+	extern char visws_board_rev;
+
+	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+		return 5;
+	return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+	if (IS_CO_APIC(irq))
+		return CO_APIC(irq);
+
+	switch (irq) {
+		case 0: return CO_APIC_CPU;
+		case CO_IRQ_IDE0: return co_apic_ide0_hack();
+		case CO_IRQ_IDE1: return CO_APIC_IDE1;
+		default: return -1;
+	}
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+
+static void enable_cobalt_irq(unsigned int irq)
+{
+	co_apic_set(is_co_apic(irq), irq);
+}
+
+static void disable_cobalt_irq(unsigned int irq)
+{
+	int entry = is_co_apic(irq);
+
+	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+	co_apic_read(CO_APIC_LO(entry));
+}
+
+/*
+ * "irq" really just serves to identify the device.  Here is where we
+ * map this to the Cobalt APIC entry where it's physically wired.
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
+ */
+static unsigned int startup_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
+		irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+	return 0;
+}
+
+static void ack_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	disable_cobalt_irq(irq);
+	apic_write(APIC_EOI, APIC_EIO_ACK);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static void end_cobalt_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip cobalt_irq_type = {
+	.typename =	"Cobalt-APIC",
+	.startup =	startup_cobalt_irq,
+	.shutdown =	disable_cobalt_irq,
+	.enable =	enable_cobalt_irq,
+	.disable =	disable_cobalt_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(unsigned int irq)
+{
+	init_8259A(0);
+
+	return startup_cobalt_irq(irq);
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cobalt_lock, flags);
+	enable_cobalt_irq(irq);
+	spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip piix4_master_irq_type = {
+	.typename =	"PIIX4-master",
+	.startup =	startup_piix4_master_irq,
+	.ack =		ack_cobalt_irq,
+	.end =		end_piix4_master_irq,
+};
+
+
+static struct irq_chip piix4_virtual_irq_type = {
+	.typename =	"PIIX4-virtual",
+	.shutdown =	disable_8259A_irq,
+	.enable =	enable_8259A_irq,
+	.disable =	disable_8259A_irq,
+};
+
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id)
+{
+	int realirq;
+	irq_desc_t *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	/* Find out what's interrupting in the PIIX4 master 8259 */
+	outb(0x0c, 0x20);		/* OCW3 Poll command */
+	realirq = inb(0x20);
+
+	/*
+	 * Bit 7 == 0 means invalid/spurious
+	 */
+	if (unlikely(!(realirq & 0x80)))
+		goto out_unlock;
+
+	realirq &= 7;
+
+	if (unlikely(realirq == 2)) {
+		outb(0x0c, 0xa0);
+		realirq = inb(0xa0);
+
+		if (unlikely(!(realirq & 0x80)))
+			goto out_unlock;
+
+		realirq = (realirq & 7) + 8;
+	}
+
+	/* mask and ack interrupt */
+	cached_irq_mask |= 1 << realirq;
+	if (unlikely(realirq > 7)) {
+		inb(0xa1);
+		outb(cached_slave_mask, 0xa1);
+		outb(0x60 + (realirq & 7), 0xa0);
+		outb(0x60 + 2, 0x20);
+	} else {
+		inb(0x21);
+		outb(cached_master_mask, 0x21);
+		outb(0x60 + realirq, 0x20);
+	}
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	desc = irq_desc + realirq;
+
+	/*
+	 * handle this 'virtual interrupt' as a Cobalt one now.
+	 */
+	kstat_cpu(smp_processor_id()).irqs[realirq]++;
+
+	if (likely(desc->action != NULL))
+		handle_IRQ_event(realirq, desc->action);
+
+	if (!(desc->status & IRQ_DISABLED))
+		enable_8259A_irq(realirq);
+
+	return IRQ_HANDLED;
+
+out_unlock:
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+	.handler =	piix4_master_intr,
+	.name =		"PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+	.handler = 	no_action,
+	.name =		"cascade",
+};
+
+
+void init_VISWS_APIC_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+
+		if (i == 0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE0) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_IDE1) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+		else if (i == CO_IRQ_8259) {
+			irq_desc[i].chip = &piix4_master_irq_type;
+		}
+		else if (i < CO_IRQ_APIC0) {
+			irq_desc[i].chip = &piix4_virtual_irq_type;
+		}
+		else if (IS_CO_APIC(i)) {
+			irq_desc[i].chip = &cobalt_irq_type;
+		}
+	}
+
+	setup_irq(CO_IRQ_8259, &master_action);
+	setup_irq(2, &cascade_action);
+}
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 956f38927aa7..b15346092b7b 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -151,7 +151,7 @@ static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
 					      insns, ip);
 		case PARAVIRT_PATCH(pv_cpu_ops.iret):
 			return patch_internal(VMI_CALL_IRET, len, insns, ip);
-		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret):
+		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
 			return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip);
 		default:
 			break;
@@ -896,7 +896,7 @@ static inline int __init activate_vmi(void)
 	 * the backend.  They are performance critical anyway, so requiring
 	 * a patch is not a big problem.
 	 */
-	pv_cpu_ops.irq_enable_syscall_ret = (void *)0xfeedbab0;
+	pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
 	pv_cpu_ops.iret = (void *)0xbadbab0;
 
 #ifdef CONFIG_SMP
@@ -932,7 +932,7 @@ static inline int __init activate_vmi(void)
 		pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
 #endif
 		pv_time_ops.sched_clock = vmi_sched_clock;
- 		pv_time_ops.get_cpu_khz = vmi_cpu_khz;
+		pv_time_ops.get_tsc_khz = vmi_tsc_khz;
 
 		/* We have true wallclock functions; disable CMOS clock sync */
 		no_sync_cmos_clock = 1;
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index a2b030780aa9..6953859fe289 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -33,8 +33,7 @@
 #include <asm/apic.h>
 #include <asm/timer.h>
 #include <asm/i8253.h>
-
-#include <irq_vectors.h>
+#include <asm/irq_vectors.h>
 
 #define VMI_ONESHOT  (VMI_ALARM_IS_ONESHOT  | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
 #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
@@ -70,8 +69,8 @@ unsigned long long vmi_sched_clock(void)
 	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
 }
 
-/* paravirt_ops.get_cpu_khz = vmi_cpu_khz */
-unsigned long vmi_cpu_khz(void)
+/* paravirt_ops.get_tsc_khz = vmi_tsc_khz */
+unsigned long vmi_tsc_khz(void)
 {
 	unsigned long long khz;
 	khz = vmi_timer_ops.get_cycle_frequency();
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index ce5ed083a1e9..2674f5796275 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -60,13 +60,6 @@ SECTIONS
 
   BUG_TABLE :text
 
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
-
   RODATA
 
   /* writeable */
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index fad3674b06a5..fd246e22fe6b 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -53,13 +53,6 @@ SECTIONS
 
   RODATA
 
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
-
   . = ALIGN(PAGE_SIZE);		/* Align data segment to page size boundary */
 				/* Data */
   .data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -177,6 +170,7 @@ SECTIONS
 	*(.con_initcall.init)
   }
   __con_initcall_end = .;
+  . = ALIGN(16);
   __x86cpuvendor_start = .;
   .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
 	*(.x86cpuvendor.init)
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index ba8c0b75ab0a..0c029e8959c7 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -15,9 +15,12 @@
 #include <linux/init.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
+
+#include <asm/apic.h>
 #include <asm/pci-direct.h>
 #include <asm/io.h>
 #include <asm/paravirt.h>
+#include <asm/setup.h>
 
 #if defined CONFIG_PCI && defined CONFIG_PARAVIRT
 /*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 61efa2f7d564..c87cbd84c3e5 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -249,7 +249,7 @@ static ctl_table kernel_root_table2[] = {
    doesn't violate that. We'll find out if it does. */
 static void __cpuinit vsyscall_set_cpu(int cpu)
 {
-	unsigned long *d;
+	unsigned long d;
 	unsigned long node = 0;
 #ifdef CONFIG_NUMA
 	node = cpu_to_node(cpu);
@@ -260,11 +260,11 @@ static void __cpuinit vsyscall_set_cpu(int cpu)
 	/* Store cpu number in limit so that it can be loaded quickly
 	   in user space in vgetcpu.
 	   12 bits for the CPU and 8 bits for the node. */
-	d = (unsigned long *)(get_cpu_gdt_table(cpu) + GDT_ENTRY_PER_CPU);
-	*d = 0x0f40000000000ULL;
-	*d |= cpu;
-	*d |= (node & 0xf) << 12;
-	*d |= (node >> 4) << 48;
+	d = 0x0f40000000000ULL;
+	d |= cpu;
+	d |= (node & 0xf) << 12;
+	d |= (node >> 4) << 48;
+	write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S);
 }
 
 static void __cpuinit cpu_vsyscall_init(void *arg)
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index f6c05d0410fb..2f306a826897 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -53,8 +53,3 @@ EXPORT_SYMBOL(init_level4_pgt);
 EXPORT_SYMBOL(load_gs_index);
 
 EXPORT_SYMBOL(_proxy_pda);
-
-#ifdef CONFIG_PARAVIRT
-/* Virtualized guests may want to use it */
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-#endif