tile: remove support for TILE64

This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

1 files changed, 3 insertions, 65 deletions

diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index c8f58c12866d..22e41cf5a2a9 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -106,10 +106,8 @@ pte_t *get_prealloc_pte(unsigned long pfn)
  */
 static int initial_heap_home(void)
 {
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (hash_default)
 		return PAGE_HOME_HASH;
-#endif
 	return smp_processor_id();
 }
 
@@ -190,14 +188,11 @@ static void __init page_table_range_init(unsigned long start,
 }
 
 
-#if CHIP_HAS_CBOX_HOME_MAP()
-
 static int __initdata ktext_hash = 1;  /* .text pages */
 static int __initdata kdata_hash = 1;  /* .data and .bss pages */
 int __write_once hash_default = 1;     /* kernel allocator pages */
 EXPORT_SYMBOL(hash_default);
 int __write_once kstack_hash = 1;      /* if no homecaching, use h4h */
-#endif /* CHIP_HAS_CBOX_HOME_MAP */
 
 /*
  * CPUs to use to for striping the pages of kernel data.  If hash-for-home
@@ -215,14 +210,12 @@ int __write_once kdata_huge;       /* if no homecaching, small pages */
 static pgprot_t __init construct_pgprot(pgprot_t prot, int home)
 {
 	prot = pte_set_home(prot, home);
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (home == PAGE_HOME_IMMUTABLE) {
 		if (ktext_hash)
 			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_HASH_L3);
 		else
 			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_NO_L3);
 	}
-#endif
 	return prot;
 }
 
@@ -236,20 +229,15 @@ static pgprot_t __init init_pgprot(ulong address)
 	unsigned long page;
 	enum { CODE_DELTA = MEM_SV_START - PAGE_OFFSET };
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* For kdata=huge, everything is just hash-for-home. */
 	if (kdata_huge)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
-#endif
 
 	/* We map the aliased pages of permanent text inaccessible. */
 	if (address < (ulong) _sinittext - CODE_DELTA)
 		return PAGE_NONE;
 
-	/*
-	 * We map read-only data non-coherent for performance.  We could
-	 * use neighborhood caching on TILE64, but it's not clear it's a win.
-	 */
+	/* We map read-only data non-coherent for performance. */
 	if ((address >= (ulong) __start_rodata &&
 	     address < (ulong) __end_rodata) ||
 	    address == (ulong) empty_zero_page) {
@@ -257,12 +245,10 @@ static pgprot_t __init init_pgprot(ulong address)
 	}
 
 #ifndef __tilegx__
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 	/* Force the atomic_locks[] array page to be hash-for-home. */
 	if (address == (ulong) atomic_locks)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
 #endif
-#endif
 
 	/*
 	 * Everything else that isn't data or bss is heap, so mark it
@@ -280,11 +266,9 @@ static pgprot_t __init init_pgprot(ulong address)
 	if (address >= (ulong) _end || address < (ulong) _einitdata)
 		return construct_pgprot(PAGE_KERNEL, initial_heap_home());
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* Use hash-for-home if requested for data/bss. */
 	if (kdata_hash)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
-#endif
 
 	/*
 	 * Make the w1data homed like heap to start with, to avoid
@@ -311,11 +295,9 @@ static pgprot_t __init init_pgprot(ulong address)
 		if (page == (ulong)empty_zero_page)
 			continue;
 #ifndef __tilegx__
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 		if (page == (ulong)atomic_locks)
 			continue;
 #endif
-#endif
 		cpu = cpumask_next(cpu, &kdata_mask);
 		if (cpu == NR_CPUS)
 			cpu = cpumask_first(&kdata_mask);
@@ -358,7 +340,7 @@ static int __init setup_ktext(char *str)
 
 	ktext_arg_seen = 1;
 
-	/* Default setting on Tile64: use a huge page */
+	/* Default setting: use a huge page */
 	if (strcmp(str, "huge") == 0)
 		pr_info("ktext: using one huge locally cached page\n");
 
@@ -404,10 +386,8 @@ static inline pgprot_t ktext_set_nocache(pgprot_t prot)
 {
 	if (!ktext_nocache)
 		prot = hv_pte_set_nc(prot);
-#if CHIP_HAS_NC_AND_NOALLOC_BITS()
 	else
 		prot = hv_pte_set_no_alloc_l2(prot);
-#endif
 	return prot;
 }
 
@@ -440,7 +420,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 	struct cpumask kstripe_mask;
 	int rc, i;
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (ktext_arg_seen && ktext_hash) {
 		pr_warning("warning: \"ktext\" boot argument ignored"
 			   " if \"kcache_hash\" sets up text hash-for-home\n");
@@ -457,7 +436,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 			  " kcache_hash=all or =allbutstack\n");
 		kdata_huge = 0;
 	}
-#endif
 
 	/*
 	 * Set up a mask for cpus to use for kernel striping.
@@ -585,13 +563,11 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 	} else {
 		pte_t pteval = pfn_pte(0, PAGE_KERNEL_EXEC);
 		pteval = pte_mkhuge(pteval);
-#if CHIP_HAS_CBOX_HOME_MAP()
 		if (ktext_hash) {
 			pteval = hv_pte_set_mode(pteval,
 						 HV_PTE_MODE_CACHE_HASH_L3);
 			pteval = ktext_set_nocache(pteval);
 		} else
-#endif /* CHIP_HAS_CBOX_HOME_MAP() */
 		if (cpumask_weight(&ktext_mask) == 1) {
 			pteval = set_remote_cache_cpu(pteval,
 					      cpumask_first(&ktext_mask));
@@ -938,26 +914,6 @@ void __init pgtable_cache_init(void)
 		panic("pgtable_cache_init(): Cannot create pgd cache");
 }
 
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-/*
- * The __w1data area holds data that is only written during initialization,
- * and is read-only and thus freely cacheable thereafter.  Fix the page
- * table entries that cover that region accordingly.
- */
-static void mark_w1data_ro(void)
-{
-	/* Loop over page table entries */
-	unsigned long addr = (unsigned long)__w1data_begin;
-	BUG_ON((addr & (PAGE_SIZE-1)) != 0);
-	for (; addr <= (unsigned long)__w1data_end - 1; addr += PAGE_SIZE) {
-		unsigned long pfn = kaddr_to_pfn((void *)addr);
-		pte_t *ptep = virt_to_kpte(addr);
-		BUG_ON(pte_huge(*ptep));   /* not relevant for kdata_huge */
-		set_pte_at(&init_mm, addr, ptep, pfn_pte(pfn, PAGE_KERNEL_RO));
-	}
-}
-#endif
-
 #ifdef CONFIG_DEBUG_PAGEALLOC
 static long __write_once initfree;
 #else
@@ -1026,10 +982,7 @@ void free_initmem(void)
 	/*
 	 * Evict the dirty initdata on the boot cpu, evict the w1data
 	 * wherever it's homed, and evict all the init code everywhere.
-	 * We are guaranteed that no one will touch the init pages any
-	 * more, and although other cpus may be touching the w1data,
-	 * we only actually change the caching on tile64, which won't
-	 * be keeping local copies in the other tiles' caches anyway.
+	 * We are guaranteed that no one will touch the init pages any more.
 	 */
 	homecache_evict(&cpu_cacheable_map);
 
@@ -1045,21 +998,6 @@ void free_initmem(void)
 	free_init_pages("unused kernel text",
 			(unsigned long)_sinittext - text_delta,
 			(unsigned long)_einittext - text_delta);
-
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-	/*
-	 * Upgrade the .w1data section to globally cached.
-	 * We don't do this on tilepro, since the cache architecture
-	 * pretty much makes it irrelevant, and in any case we end
-	 * up having racing issues with other tiles that may touch
-	 * the data after we flush the cache but before we update
-	 * the PTEs and flush the TLBs, causing sharer shootdowns
-	 * later.  Even though this is to clean data, it seems like
-	 * an unnecessary complication.
-	 */
-	mark_w1data_ro();
-#endif
-
 	/* Do a global TLB flush so everyone sees the changes. */
 	flush_tlb_all();
 }