Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-fixes-for-linus

1 files changed, 269 insertions, 0 deletions

diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S
new file mode 100644
index 000000000000..6bc3a932fe45
--- /dev/null
+++ b/arch/tile/kernel/head_64.S
@@ -0,0 +1,269 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE startup code.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+#include <arch/spr_def.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ */
+
+	__HEAD
+ENTRY(_start)
+	/* Notify the hypervisor of what version of the API we want */
+	{
+	  movei r1, TILE_CHIP
+	  movei r2, TILE_CHIP_REV
+	}
+	{
+	  moveli r0, _HV_VERSION
+	  jal hv_init
+	}
+	/* Get a reasonable default ASID in r0 */
+	{
+	  move r0, zero
+	  jal hv_inquire_asid
+	}
+
+	/*
+	 * Install the default page table.  The relocation required to
+	 * statically define the table is a bit too complex, so we have
+	 * to plug in the pointer from the L0 to the L1 table by hand.
+	 * We only do this on the first cpu to boot, though, since the
+	 * other CPUs should see a properly-constructed page table.
+	 */
+	{
+	  v4int_l r2, zero, r0    /* ASID for hv_install_context */
+	  moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET)
+	}
+	{
+	  shl16insli r4, r4, hw0(swapper_pgprot - PAGE_OFFSET)
+	}
+	{
+	  ld r1, r4               /* access_pte for hv_install_context */
+	}
+	{
+	  moveli r0, hw1_last(.Lsv_data_pmd - PAGE_OFFSET)
+	  moveli r6, hw1_last(temp_data_pmd - PAGE_OFFSET)
+	}
+	{
+	  /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */
+	  bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL
+	  inv r4
+	}
+	bnez r7, .Lno_write
+	{
+	  shl16insli r0, r0, hw0(.Lsv_data_pmd - PAGE_OFFSET)
+	  shl16insli r6, r6, hw0(temp_data_pmd - PAGE_OFFSET)
+	}
+	{
+	  /* Cut off the low bits of the PT address. */
+	  shrui r6, r6, HV_LOG2_PAGE_TABLE_ALIGN
+	  /* Start with our access pte. */
+	  move r5, r1
+	}
+	{
+	  /* Stuff the address into the page table pointer slot of the PTE. */
+	  bfins r5, r6, HV_PTE_INDEX_PTFN, \
+			HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1
+	}
+	{
+	  /* Store the L0 data PTE. */
+	  st r0, r5
+	  addli r6, r6, (temp_code_pmd - temp_data_pmd) >> \
+			HV_LOG2_PAGE_TABLE_ALIGN
+	}
+	{
+	  addli r0, r0, .Lsv_code_pmd - .Lsv_data_pmd
+	  bfins r5, r6, HV_PTE_INDEX_PTFN, \
+			HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1
+	}
+	/* Store the L0 code PTE. */
+	st r0, r5
+
+.Lno_write:
+	moveli lr, hw2_last(1f)
+	{
+	  shl16insli lr, lr, hw1(1f)
+	  moveli r0, hw1_last(swapper_pg_dir - PAGE_OFFSET)
+	}
+	{
+	  shl16insli lr, lr, hw0(1f)
+	  shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET)
+	}
+	{
+	  move r3, zero
+	  j hv_install_context
+	}
+1:
+
+	/* Install the interrupt base. */
+	moveli r0, hw2_last(MEM_SV_START)
+	shl16insli r0, r0, hw1(MEM_SV_START)
+	shl16insli r0, r0, hw0(MEM_SV_START)
+	mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0
+
+	/*
+	 * Get our processor number and save it away in SAVE_K_0.
+	 * Extract stuff from the topology structure: r4 = y, r6 = x,
+	 * r5 = width.  FIXME: consider whether we want to just make these
+	 * 64-bit values (and if so fix smp_topology write below, too).
+	 */
+	jal hv_inquire_topology
+	{
+	  v4int_l r5, zero, r1    /* r5 = width */
+	  shrui r4, r0, 32        /* r4 = y */
+	}
+	{
+	  v4int_l r6, zero, r0    /* r6 = x */
+	  mul_lu_lu r4, r4, r5
+	}
+	{
+	  add r4, r4, r6          /* r4 == cpu == y*width + x */
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * Load up our per-cpu offset.  When the first (master) tile
+	 * boots, this value is still zero, so we will load boot_pc
+	 * with start_kernel, and boot_sp with init_stack + THREAD_SIZE.
+	 * The master tile initializes the per-cpu offset array, so that
+	 * when subsequent (secondary) tiles boot, they will instead load
+	 * from their per-cpu versions of boot_sp and boot_pc.
+	 */
+	moveli r5, hw2_last(__per_cpu_offset)
+	shl16insli r5, r5, hw1(__per_cpu_offset)
+	shl16insli r5, r5, hw0(__per_cpu_offset)
+	shl3add r5, r4, r5
+	ld r5, r5
+	bnez r5, 1f
+
+	/*
+	 * Save the width and height to the smp_topology variable
+	 * for later use.
+	 */
+	moveli r0, hw2_last(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+	shl16insli r0, r0, hw1(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+	shl16insli r0, r0, hw0(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+	st r0, r1
+1:
+#else
+	move r5, zero
+#endif
+
+	/* Load and go with the correct pc and sp. */
+	{
+	  moveli r1, hw2_last(boot_sp)
+	  moveli r0, hw2_last(boot_pc)
+	}
+	{
+	  shl16insli r1, r1, hw1(boot_sp)
+	  shl16insli r0, r0, hw1(boot_pc)
+	}
+	{
+	  shl16insli r1, r1, hw0(boot_sp)
+	  shl16insli r0, r0, hw0(boot_pc)
+	}
+	{
+	  add r1, r1, r5
+	  add r0, r0, r5
+	}
+	ld r0, r0
+	ld sp, r1
+	or r4, sp, r4
+	mtspr SPR_SYSTEM_SAVE_K_0, r4  /* save ksp0 + cpu */
+	addi sp, sp, -STACK_TOP_DELTA
+	{
+	  move lr, zero   /* stop backtraces in the called function */
+	  jr r0
+	}
+	ENDPROC(_start)
+
+__PAGE_ALIGNED_BSS
+	.align PAGE_SIZE
+ENTRY(empty_zero_page)
+	.fill PAGE_SIZE,1,0
+	END(empty_zero_page)
+
+	.macro PTE cpa, bits1
+	.quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\
+	      HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\
+	      (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
+	.endm
+
+__PAGE_ALIGNED_DATA
+	.align PAGE_SIZE
+ENTRY(swapper_pg_dir)
+	.org swapper_pg_dir + HV_L0_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
+.Lsv_data_pmd:
+	.quad 0  /* PTE temp_data_pmd - PAGE_OFFSET, 0 */
+	.org swapper_pg_dir + HV_L0_INDEX(MEM_SV_START) * HV_PTE_SIZE
+.Lsv_code_pmd:
+	.quad 0  /* PTE temp_code_pmd - PAGE_OFFSET, 0 */
+	.org swapper_pg_dir + HV_L0_SIZE
+	END(swapper_pg_dir)
+
+	.align HV_PAGE_TABLE_ALIGN
+ENTRY(temp_data_pmd)
+	/*
+	 * We fill the PAGE_OFFSET pmd with huge pages with
+	 * VA = PA + PAGE_OFFSET.  We remap things with more precise access
+	 * permissions later.
+	 */
+	.set addr, 0
+	.rept HV_L1_ENTRIES
+	PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE
+	.set addr, addr + HV_PAGE_SIZE_LARGE
+	.endr
+	.org temp_data_pmd + HV_L1_SIZE
+	END(temp_data_pmd)
+
+	.align HV_PAGE_TABLE_ALIGN
+ENTRY(temp_code_pmd)
+	/*
+	 * We fill the MEM_SV_START pmd with huge pages with
+	 * VA = PA + PAGE_OFFSET.  We remap things with more precise access
+	 * permissions later.
+	 */
+	.set addr, 0
+	.rept HV_L1_ENTRIES
+	PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE
+	.set addr, addr + HV_PAGE_SIZE_LARGE
+	.endr
+	.org temp_code_pmd + HV_L1_SIZE
+	END(temp_code_pmd)
+
+	/*
+	 * Isolate swapper_pgprot to its own cache line, since each cpu
+	 * starting up will read it using VA-is-PA and local homing.
+	 * This would otherwise likely conflict with other data on the cache
+	 * line, once we have set its permanent home in the page tables.
+	 */
+	__INITDATA
+	.align CHIP_L2_LINE_SIZE()
+ENTRY(swapper_pgprot)
+	.quad HV_PTE_PRESENT | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
+	.align CHIP_L2_LINE_SIZE()
+	END(swapper_pgprot)