sparc/PCI: Use dev_printk() when possible

Use the pci_info() and pci_err() wrappers for dev_printk() when possible.

Log PCI device vendor and device IDs and BAR information in the same format
used by other architectures.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

1 files changed, 44 insertions, 50 deletions

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8a04983cf8a1..17ea16a1337c 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -214,8 +214,8 @@ static void pci_parse_of_addrs(struct platform_device *op,
 	if (!addrs)
 		return;
 	if (ofpci_verbose)
-		printk("    parse addresses (%d bytes) @ %p\n",
-		       proplen, addrs);
+		pci_info(dev, "    parse addresses (%d bytes) @ %p\n",
+			 proplen, addrs);
 	op_res = &op->resource[0];
 	for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) {
 		struct resource *res;
@@ -227,8 +227,8 @@ static void pci_parse_of_addrs(struct platform_device *op,
 			continue;
 		i = addrs[0] & 0xff;
 		if (ofpci_verbose)
-			printk("  start: %llx, end: %llx, i: %x\n",
-			       op_res->start, op_res->end, i);
+			pci_info(dev, "  start: %llx, end: %llx, i: %x\n",
+				 op_res->start, op_res->end, i);
 
 		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
 			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
@@ -236,13 +236,15 @@ static void pci_parse_of_addrs(struct platform_device *op,
 			res = &dev->resource[PCI_ROM_RESOURCE];
 			flags |= IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
 		} else {
-			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+			pci_err(dev, "bad cfg reg num 0x%x\n", i);
 			continue;
 		}
 		res->start = op_res->start;
 		res->end = op_res->end;
 		res->flags = flags;
 		res->name = pci_name(dev);
+
+		pci_info(dev, "reg 0x%x: %pR\n", i, res);
 	}
 }
 
@@ -289,8 +291,8 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 		type = "";
 
 	if (ofpci_verbose)
-		printk("    create device, devfn: %x, type: %s\n",
-		       devfn, type);
+		pci_info(bus,"    create device, devfn: %x, type: %s\n",
+			 devfn, type);
 
 	dev->sysdata = node;
 	dev->dev.parent = bus->bridge;
@@ -323,10 +325,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
-	if (ofpci_verbose)
-		printk("    class: 0x%x device name: %s\n",
-		       dev->class, pci_name(dev));
-
 	/* I have seen IDE devices which will not respond to
 	 * the bmdma simplex check reads if bus mastering is
 	 * disabled.
@@ -353,10 +351,13 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 			dev->irq = PCI_IRQ_NONE;
 	}
 
+	pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
+		 dev->vendor, dev->device, dev->hdr_type, dev->class);
+
 	pci_parse_of_addrs(sd->op, node, dev);
 
 	if (ofpci_verbose)
-		printk("    adding to system ...\n");
+		pci_info(dev, "    adding to system ...\n");
 
 	pci_device_add(dev, bus);
 
@@ -430,19 +431,19 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 	u64 size;
 
 	if (ofpci_verbose)
-		printk("of_scan_pci_bridge(%s)\n", node->full_name);
+		pci_info(dev, "of_scan_pci_bridge(%s)\n", node->full_name);
 
 	/* parse bus-range property */
 	busrange = of_get_property(node, "bus-range", &len);
 	if (busrange == NULL || len != 8) {
-		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+		pci_info(dev, "Can't get bus-range for PCI-PCI bridge %s\n",
 		       node->full_name);
 		return;
 	}
 
 	if (ofpci_verbose)
-		printk("    Bridge bus range [%u --> %u]\n",
-		       busrange[0], busrange[1]);
+		pci_info(dev, "    Bridge bus range [%u --> %u]\n",
+			 busrange[0], busrange[1]);
 
 	ranges = of_get_property(node, "ranges", &len);
 	simba = 0;
@@ -454,8 +455,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 
 	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
 	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
+		pci_err(dev, "Failed to create pci bus for %s\n",
+			node->full_name);
 		return;
 	}
 
@@ -464,8 +465,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 	bus->bridge_ctl = 0;
 
 	if (ofpci_verbose)
-		printk("    Bridge ranges[%p] simba[%d]\n",
-		       ranges, simba);
+		pci_info(dev, "    Bridge ranges[%p] simba[%d]\n",
+			 ranges, simba);
 
 	/* parse ranges property, or cook one up by hand for Simba */
 	/* PCI #address-cells == 3 and #size-cells == 2 always */
@@ -487,10 +488,10 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 		u64 start;
 
 		if (ofpci_verbose)
-			printk("    RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:"
-			       "%08x:%08x]\n",
-			       ranges[0], ranges[1], ranges[2], ranges[3],
-			       ranges[4], ranges[5], ranges[6], ranges[7]);
+			pci_info(dev, "    RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:"
+				 "%08x:%08x]\n",
+				 ranges[0], ranges[1], ranges[2], ranges[3],
+				 ranges[4], ranges[5], ranges[6], ranges[7]);
 
 		flags = pci_parse_of_flags(ranges[0]);
 		size = GET_64BIT(ranges, 6);
@@ -510,14 +511,14 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 		if (flags & IORESOURCE_IO) {
 			res = bus->resource[0];
 			if (res->flags) {
-				printk(KERN_ERR "PCI: ignoring extra I/O range"
-				       " for bridge %s\n", node->full_name);
+				pci_err(dev, "ignoring extra I/O range"
+					" for bridge %s\n", node->full_name);
 				continue;
 			}
 		} else {
 			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
-				printk(KERN_ERR "PCI: too many memory ranges"
-				       " for bridge %s\n", node->full_name);
+				pci_err(dev, "too many memory ranges"
+					" for bridge %s\n", node->full_name);
 				continue;
 			}
 			res = bus->resource[i];
@@ -529,8 +530,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
 		region.end = region.start + size - 1;
 
 		if (ofpci_verbose)
-			printk("      Using flags[%08x] start[%016llx] size[%016llx]\n",
-			       flags, start, size);
+			pci_info(dev, "      Using flags[%08x] start[%016llx] size[%016llx]\n",
+				 flags, start, size);
 
 		pcibios_bus_to_resource(dev->bus, res, &region);
 	}
@@ -538,7 +539,7 @@ after_ranges:
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
 		bus->number);
 	if (ofpci_verbose)
-		printk("    bus name: %s\n", bus->name);
+		pci_info(dev, "    bus name: %s\n", bus->name);
 
 	pci_of_scan_bus(pbm, node, bus);
 }
@@ -553,14 +554,14 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm,
 	struct pci_dev *dev;
 
 	if (ofpci_verbose)
-		printk("PCI: scan_bus[%s] bus no %d\n",
-		       node->full_name, bus->number);
+		pci_info(bus, "scan_bus[%s] bus no %d\n",
+			 node->full_name, bus->number);
 
 	child = NULL;
 	prev_devfn = -1;
 	while ((child = of_get_next_child(node, child)) != NULL) {
 		if (ofpci_verbose)
-			printk("  * %s\n", child->full_name);
+			pci_info(bus, "  * %s\n", child->full_name);
 		reg = of_get_property(child, "reg", &reglen);
 		if (reg == NULL || reglen < 20)
 			continue;
@@ -581,8 +582,7 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm,
 		if (!dev)
 			continue;
 		if (ofpci_verbose)
-			printk("PCI: dev header type: %x\n",
-			       dev->hdr_type);
+			pci_info(dev, "dev header type: %x\n", dev->hdr_type);
 
 		if (pci_is_bridge(dev))
 			of_scan_pci_bridge(pbm, child, dev);
@@ -678,12 +678,8 @@ static void pci_claim_bus_resources(struct pci_bus *bus)
 				continue;
 
 			if (ofpci_verbose)
-				printk("PCI: Claiming %s: "
-				       "Resource %d: %016llx..%016llx [%x]\n",
-				       pci_name(dev), i,
-				       (unsigned long long)r->start,
-				       (unsigned long long)r->end,
-				       (unsigned int)r->flags);
+				pci_info(dev, "Claiming Resource %d: %pR\n",
+					 i, r);
 
 			pci_claim_resource(dev, i);
 		}
@@ -755,9 +751,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	}
 
 	if (cmd != oldcmd) {
-		printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
-		       pci_name(dev), cmd);
-                /* Enable the appropriate bits in the PCI command register.  */
+		pci_info(dev, "enabling device (%04x -> %04x)\n", oldcmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
 	return 0;
@@ -1117,8 +1111,8 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus)
 	sp = prop->names;
 
 	if (ofpci_verbose)
-		printk("PCI: Making slots for [%s] mask[0x%02x]\n",
-		       node->full_name, mask);
+		pci_info(bus, "Making slots for [%s] mask[0x%02x]\n",
+			 node->full_name, mask);
 
 	i = 0;
 	while (mask) {
@@ -1131,12 +1125,12 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus)
 		}
 
 		if (ofpci_verbose)
-			printk("PCI: Making slot [%s]\n", sp);
+			pci_info(bus, "Making slot [%s]\n", sp);
 
 		pci_slot = pci_create_slot(bus, i, sp, NULL);
 		if (IS_ERR(pci_slot))
-			printk(KERN_ERR "PCI: pci_create_slot returned %ld\n",
-			       PTR_ERR(pci_slot));
+			pci_err(bus, "pci_create_slot returned %ld\n",
+				PTR_ERR(pci_slot));
 
 		sp += strlen(sp) + 1;
 		mask &= ~this_bit;