Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...

9 files changed, 12 insertions, 18 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0a9d439bcda6..d111044f41a2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -98,7 +98,6 @@ config PPC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select SYSCTL_EXCEPTION_TRACE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select VIRT_TO_BUS if !PPC64
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 6e287f1294fa..e3257f24a8a1 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -137,7 +137,7 @@ config STB03xxx
 config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 40x
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Enable gpiolib support for ppc40x based boards
 
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 5538e57c36c1..48fc18041ff6 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -273,7 +273,7 @@ config PPC44x_SIMPLE
 config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 44x
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Enable gpiolib support for ppc440 based boards
 
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index f09016f6b3a6..bf7ae5cbd07a 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -6,7 +6,6 @@ config PPC_MPC512x
 	select IPIC
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 2bdc8c862c46..4ef7f1cd05b7 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -116,7 +116,6 @@ endif
 # used for usb & gpio
 config PPC_MPC831x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for math-emu
 config PPC_MPC832x
@@ -125,9 +124,7 @@ config PPC_MPC832x
 # used for usb & gpio
 config PPC_MPC834x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for usb & gpio
 config PPC_MPC837x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index e626461a63bd..df25a3ed489d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -225,7 +225,7 @@ config GE_IMP3A
 	select DEFAULT_UIMAGE
 	select SWIOTLB
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE Intelligent Platforms IMP3A
@@ -272,7 +272,7 @@ config CORENET_GENERIC
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 1afd1e4a2dd2..3988f16e46c1 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -4,7 +4,6 @@ menuconfig PPC_86xx
 	depends on 6xx
 	select FSL_SOC
 	select ALTIVEC
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  The Freescale E600 SoCs have 74xx cores.
 
@@ -37,7 +36,7 @@ config GEF_PPC9A
 	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE PPC9A.
@@ -46,7 +45,7 @@ config GEF_SBC310
 	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE SBC310.
@@ -55,7 +54,7 @@ config GEF_SBC610
 	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	select HAS_RAPIDIO
 	help
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 157250426b56..564d99bb2a26 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -109,7 +109,7 @@ config 8xx_COPYBACK
 
 config 8xx_GPIO
 	bool "GPIO API Support"
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Saying Y here will cause the ports on an MPC8xx processor to be used
 	  with the GPIO API.  If you say N here, the kernel needs less memory.
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 46a3533d3acb..3663f71fd913 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -275,7 +275,7 @@ config TAU_AVERAGE
 config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
@@ -285,7 +285,7 @@ config CPM2
 	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
 	select PPC_PCI_CHOICE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -324,7 +324,7 @@ config OF_RTC
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here to support simple, memory-mapped GPIO controllers.
 	  These are usually BCSRs used to control board's switches, LEDs,
@@ -334,7 +334,7 @@ config SIMPLE_GPIO
 config MCU_MPC8349EMITX
 	bool "MPC8349E-mITX MCU driver"
 	depends on I2C=y && PPC_83xx
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here to enable soft power-off functionality on the Freescale
 	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will