powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S

The system call table has been consolidated into systbl.S.  We have
separate 32-bit and 64-bit versions of entry.S and misc.S since the
code is mostly sufficiently different to be not worth merging.
There are some common bits that will be extracted in future.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 1039 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
new file mode 100644
index 000000000000..fa8c20ffec78
--- /dev/null
+++ b/arch/powerpc/kernel/misc_32.S
@@ -0,0 +1,1039 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/cputable.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+	.text
+
+	.align	5
+_GLOBAL(__delay)
+	cmpwi	0,r3,0
+	mtctr	r3
+	beqlr
+1:	bdnz	1b
+	blr
+
+/*
+ * Returns (address we're running at) - (address we were linked at)
+ * for use before the text and data are mapped to KERNELBASE.
+ */
+_GLOBAL(reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r3
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r3,r4,r3
+	mtlr	r0
+	blr
+
+/*
+ * add_reloc_offset(x) returns x + reloc_offset().
+ */
+_GLOBAL(add_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r5,r4,r5
+	add	r3,r3,r5
+	mtlr	r0
+	blr
+
+/*
+ * sub_reloc_offset(x) returns x - reloc_offset().
+ */
+_GLOBAL(sub_reloc_offset)
+	mflr	r0
+	bl	1f
+1:	mflr	r5
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r5,r4,r5
+	subf	r3,r5,r3
+	mtlr	r0
+	blr
+
+/*
+ * reloc_got2 runs through the .got2 section adding an offset
+ * to each entry.
+ */
+_GLOBAL(reloc_got2)
+	mflr	r11
+	lis	r7,__got2_start@ha
+	addi	r7,r7,__got2_start@l
+	lis	r8,__got2_end@ha
+	addi	r8,r8,__got2_end@l
+	subf	r8,r7,r8
+	srwi.	r8,r8,2
+	beqlr
+	mtctr	r8
+	bl	1f
+1:	mflr	r0
+	lis	r4,1b@ha
+	addi	r4,r4,1b@l
+	subf	r0,r4,r0
+	add	r7,r0,r7
+2:	lwz	r0,0(r7)
+	add	r0,r0,r3
+	stw	r0,0(r7)
+	addi	r7,r7,4
+	bdnz	2b
+	mtlr	r11
+	blr
+
+/*
+ * identify_cpu,
+ * called with r3 = data offset and r4 = CPU number
+ * doesn't change r3
+ */
+_GLOBAL(identify_cpu)
+	addis	r8,r3,cpu_specs@ha
+	addi	r8,r8,cpu_specs@l
+	mfpvr	r7
+1:
+	lwz	r5,CPU_SPEC_PVR_MASK(r8)
+	and	r5,r5,r7
+	lwz	r6,CPU_SPEC_PVR_VALUE(r8)
+	cmplw	0,r6,r5
+	beq	1f
+	addi	r8,r8,CPU_SPEC_ENTRY_SIZE
+	b	1b
+1:
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	sub	r8,r8,r3
+	stw	r8,0(r6)
+	blr
+
+/*
+ * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
+ * and writes nop's over sections of code that don't apply for this cpu.
+ * r3 = data offset (not changed)
+ */
+_GLOBAL(do_cpu_ftr_fixups)
+	/* Get CPU 0 features */
+	addis	r6,r3,cur_cpu_spec@ha
+	addi	r6,r6,cur_cpu_spec@l
+	lwz	r4,0(r6)
+	add	r4,r4,r3
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+
+	/* Get the fixup table */
+	addis	r6,r3,__start___ftr_fixup@ha
+	addi	r6,r6,__start___ftr_fixup@l
+	addis	r7,r3,__stop___ftr_fixup@ha
+	addi	r7,r7,__stop___ftr_fixup@l
+
+	/* Do the fixup */
+1:	cmplw	0,r6,r7
+	bgelr
+	addi	r6,r6,16
+	lwz	r8,-16(r6)	/* mask */
+	and	r8,r8,r4
+	lwz	r9,-12(r6)	/* value */
+	cmplw	0,r8,r9
+	beq	1b
+	lwz	r8,-8(r6)	/* section begin */
+	lwz	r9,-4(r6)	/* section end */
+	subf.	r9,r8,r9
+	beq	1b
+	/* write nops over the section of code */
+	/* todo: if large section, add a branch at the start of it */
+	srwi	r9,r9,2
+	mtctr	r9
+	add	r8,r8,r3
+	lis	r0,0x60000000@h	/* nop */
+3:	stw	r0,0(r8)
+	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
+	beq	2f
+	dcbst	0,r8		/* suboptimal, but simpler */
+	sync
+	icbi	0,r8
+2:	addi	r8,r8,4
+	bdnz	3b
+	sync			/* additional sync needed on g4 */
+	isync
+	b	1b
+
+/*
+ * call_setup_cpu - call the setup_cpu function for this cpu
+ * r3 = data offset, r24 = cpu number
+ *
+ * Setup function is called with:
+ *   r3 = data offset
+ *   r4 = ptr to CPU spec (relocated)
+ */
+_GLOBAL(call_setup_cpu)
+	addis	r4,r3,cur_cpu_spec@ha
+	addi	r4,r4,cur_cpu_spec@l
+	lwz	r4,0(r4)
+	add	r4,r4,r3
+	lwz	r5,CPU_SPEC_SETUP(r4)
+	cmpi	0,r5,0
+	add	r5,r5,r3
+	beqlr
+	mtctr	r5
+	bctr
+
+#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
+
+/* This gets called by via-pmu.c to switch the PLL selection
+ * on 750fx CPU. This function should really be moved to some
+ * other place (as most of the cpufreq code in via-pmu
+ */
+_GLOBAL(low_choose_750fx_pll)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* If switching to PLL1, disable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	beq	1f
+	mfspr	r5,SPRN_HID0
+	rlwinm	r5,r5,0,27,25
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1	/* Build a HID1:PS bit from parameter */
+	rlwinm	r5,r3,16,15,15	/* Clear out HID1:PS from value read */
+	rlwinm	r4,r4,0,16,14	/* Could have I used rlwimi here ? */
+	or	r4,r4,r5
+	mtspr	SPRN_HID1,r4
+
+	/* Store new HID1 image */
+	rlwinm	r6,r1,0,0,18
+	lwz	r6,TI_CPU(r6)
+	slwi	r6,r6,2
+	addis	r6,r6,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+
+	/* If switching to PLL0, enable HID0:BTIC */
+	cmplwi	cr0,r3,0
+	bne	1f
+	mfspr	r5,SPRN_HID0
+	ori	r5,r5,HID0_BTIC
+	sync
+	mtspr	SPRN_HID0,r5
+	isync
+	sync
+
+1:
+	/* Return */
+	mtmsr	r7
+	blr
+
+_GLOBAL(low_choose_7447a_dfs)
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+	
+	/* Calc new HID1 value */
+	mfspr	r4,SPRN_HID1
+	insrwi	r4,r3,1,9	/* insert parameter into bit 9 */
+	sync
+	mtspr	SPRN_HID1,r4
+	sync
+	isync
+
+	/* Return */
+	mtmsr	r7
+	blr
+
+#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
+
+/*
+ * complement mask on the msr then "or" some values on.
+ *     _nmask_and_or_msr(nmask, value_to_or)
+ */
+_GLOBAL(_nmask_and_or_msr)
+	mfmsr	r0		/* Get current msr */
+	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
+	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
+	SYNC			/* Some chip revs have problems here... */
+	mtmsr	r0		/* Update machine state */
+	isync
+	blr			/* Done */
+
+
+/*
+ * Flush MMU TLB
+ */
+_GLOBAL(_tlbia)
+#if defined(CONFIG_40x)
+	sync			/* Flush to memory before changing mapping */
+	tlbia
+	isync			/* Flush shadow TLB */
+#elif defined(CONFIG_44x)
+	li	r3,0
+	sync
+
+	/* Load high watermark */
+	lis	r4,tlb_44x_hwater@ha
+	lwz	r5,tlb_44x_hwater@l(r4)
+
+1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
+	addi	r3,r3,1
+	cmpw	0,r3,r5
+	ble	1b
+
+	isync
+#elif defined(CONFIG_FSL_BOOKE)
+	/* Invalidate all entries in TLB0 */
+	li	r3, 0x04
+	tlbivax	0,3
+	/* Invalidate all entries in TLB1 */
+	li	r3, 0x0c
+	tlbivax	0,3
+	/* Invalidate all entries in TLB2 */
+	li	r3, 0x14
+	tlbivax	0,3
+	/* Invalidate all entries in TLB3 */
+	li	r3, 0x1c
+	tlbivax	0,3
+	msync
+#ifdef CONFIG_SMP
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,10
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	sync
+	tlbia
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	sync
+	tlbia
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! defined(CONFIG_40x) */
+	blr
+
+/*
+ * Flush MMU TLB for a particular address
+ */
+_GLOBAL(_tlbie)
+#if defined(CONFIG_40x)
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
+	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
+	 * the TLB entry. */
+	tlbwe	r3, r3, TLB_TAG
+	isync
+10:
+#elif defined(CONFIG_44x)
+	mfspr	r4,SPRN_MMUCR
+	mfspr	r5,SPRN_PID			/* Get PID */
+	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mtspr	SPRN_MMUCR,r4
+
+	tlbsx.	r3, 0, r3
+	bne	10f
+	sync
+	/* There are only 64 TLB entries, so r3 < 64,
+	 * which means bit 22, is clear.  Since 22 is
+	 * the V bit in the TLB_PAGEID, loading this
+	 * value will invalidate the TLB entry.
+	 */
+	tlbwe	r3, r3, PPC44x_TLB_PAGEID
+	isync
+10:
+#elif defined(CONFIG_FSL_BOOKE)
+	rlwinm	r4, r3, 0, 0, 19
+	ori	r5, r4, 0x08	/* TLBSEL = 1 */
+	ori	r6, r4, 0x10	/* TLBSEL = 2 */
+	ori	r7, r4, 0x18	/* TLBSEL = 3 */
+	tlbivax	0, r4
+	tlbivax	0, r5
+	tlbivax	0, r6
+	tlbivax	0, r7
+	msync
+#if defined(CONFIG_SMP)
+	tlbsync
+#endif /* CONFIG_SMP */
+#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#if defined(CONFIG_SMP)
+	rlwinm	r8,r1,0,0,18
+	lwz	r8,TI_CPU(r8)
+	oris	r8,r8,11
+	mfmsr	r10
+	SYNC
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	SYNC_601
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	eieio
+	tlbie	r3
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	SYNC_601
+	isync
+#else /* CONFIG_SMP */
+	tlbie	r3
+	sync
+#endif /* CONFIG_SMP */
+#endif /* ! CONFIG_40x */
+	blr
+
+/*
+ * Flush instruction cache.
+ * This is a no-op on the 601.
+ */
+_GLOBAL(flush_instruction_cache)
+#if defined(CONFIG_8xx)
+	isync
+	lis	r5, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r5
+#elif defined(CONFIG_4xx)
+#ifdef CONFIG_403GCX
+	li      r3, 512
+	mtctr   r3
+	lis     r4, KERNELBASE@h
+1:	iccci   0, r4
+	addi    r4, r4, 16
+	bdnz    1b
+#else
+	lis	r3, KERNELBASE@h
+	iccci	0,r3
+#endif
+#elif CONFIG_FSL_BOOKE
+BEGIN_FTR_SECTION
+	mfspr   r3,SPRN_L1CSR0
+	ori     r3,r3,L1CSR0_CFI|L1CSR0_CLFC
+	/* msync; isync recommended here */
+	mtspr   SPRN_L1CSR0,r3
+	isync
+	blr
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	mfspr	r3,SPRN_L1CSR1
+	ori	r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
+	mtspr	SPRN_L1CSR1,r3
+#else
+	mfspr	r3,SPRN_PVR
+	rlwinm	r3,r3,16,16,31
+	cmpwi	0,r3,1
+	beqlr			/* for 601, do nothing */
+	/* 603/604 processor - use invalidate-all bit in HID0 */
+	mfspr	r3,SPRN_HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	SPRN_HID0,r3
+#endif /* CONFIG_8xx/4xx */
+	isync
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+BEGIN_FTR_SECTION
+	blr				/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbst	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbf	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,L1_CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_L1_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+1:	dcbi	0,r3
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * 40x cores have 8K or 16K dcache and 32 byte line size.
+ * 44x has a 32K dcache and 32 byte line size.
+ * 8xx has 1, 2, 4, 8K variants.
+ * For now, cover the worst case of the 44x.
+ * Must be called with external interrupts disabled.
+ */
+#define CACHE_NWAYS	64
+#define CACHE_NLINES	16
+
+_GLOBAL(flush_dcache_all)
+	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
+	mtctr	r4
+	lis     r5, KERNELBASE@h
+1:	lwz	r3, 0(r5)		/* Load one word from every line */
+	addi	r5, r5, L1_CACHE_LINE_SIZE
+	bdnz    1b
+	blr
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_dcache_icache(void *page)
+ */
+_GLOBAL(__flush_dcache_icache)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM, identified
+ * by its physical address.  We turn off the MMU so we can just use
+ * the physical address (this may be a highmem page without a kernel
+ * mapping).
+ *
+ *	void __flush_dcache_icache_phys(unsigned long physaddr)
+ */
+_GLOBAL(__flush_dcache_icache_phys)
+BEGIN_FTR_SECTION
+	blr					/* for 601, do nothing */
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
+	mfmsr	r10
+	rlwinm	r0,r10,0,28,26			/* clear DR */
+	mtmsr	r0
+	isync
+	rlwinm	r3,r3,0,0,19			/* Get page base address */
+	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3				/* Write line to ram */
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	mtmsr	r10				/* restore DR */
+	isync
+	blr
+
+/*
+ * Clear pages using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ *
+ * void clear_pages(void *page, int order) ;
+ */
+_GLOBAL(clear_pages)
+	li	r0,4096/L1_CACHE_LINE_SIZE
+	slw	r0,r0,r4
+	mtctr	r0
+#ifdef CONFIG_8xx
+	li	r4, 0
+1:	stw	r4, 0(r3)
+	stw	r4, 4(r3)
+	stw	r4, 8(r3)
+	stw	r4, 12(r3)
+#else
+1:	dcbz	0,r3
+#endif
+	addi	r3,r3,L1_CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Copy a whole page.  We use the dcbz instruction on the destination
+ * to reduce memory traffic (it eliminates the unnecessary reads of
+ * the destination into cache).  This requires that the destination
+ * is cacheable.
+ */
+#define COPY_16_BYTES		\
+	lwz	r6,4(r4);	\
+	lwz	r7,8(r4);	\
+	lwz	r8,12(r4);	\
+	lwzu	r9,16(r4);	\
+	stw	r6,4(r3);	\
+	stw	r7,8(r3);	\
+	stw	r8,12(r3);	\
+	stwu	r9,16(r3)
+
+_GLOBAL(copy_page)
+	addi	r3,r3,-4
+	addi	r4,r4,-4
+
+#ifdef CONFIG_8xx
+	/* don't use prefetch on 8xx */
+    	li	r0,4096/L1_CACHE_LINE_SIZE
+	mtctr	r0
+1:	COPY_16_BYTES
+	bdnz	1b
+	blr
+
+#else	/* not 8xx, we can prefetch */
+	li	r5,4
+
+#if MAX_COPY_PREFETCH > 1
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	mtctr	r0
+11:	dcbt	r11,r4
+	addi	r11,r11,L1_CACHE_LINE_SIZE
+	bdnz	11b
+#else /* MAX_COPY_PREFETCH == 1 */
+	dcbt	r5,r4
+	li	r11,L1_CACHE_LINE_SIZE+4
+#endif /* MAX_COPY_PREFETCH */
+	li	r0,4096/L1_CACHE_LINE_SIZE - MAX_COPY_PREFETCH
+	crclr	4*cr0+eq
+2:
+	mtctr	r0
+1:
+	dcbt	r11,r4
+	dcbz	r5,r3
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 32
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 64
+	COPY_16_BYTES
+	COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 128
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+	COPY_16_BYTES
+#endif
+#endif
+#endif
+	bdnz	1b
+	beqlr
+	crnot	4*cr0+eq,4*cr0+eq
+	li	r0,MAX_COPY_PREFETCH
+	li	r11,4
+	b	2b
+#endif	/* CONFIG_8xx */
+
+/*
+ * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
+ * void atomic_set_mask(atomic_t mask, atomic_t *addr);
+ */
+_GLOBAL(atomic_clear_mask)
+10:	lwarx	r5,0,r4
+	andc	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+_GLOBAL(atomic_set_mask)
+10:	lwarx	r5,0,r4
+	or	r5,r5,r3
+	PPC405_ERR77(0,r4)
+	stwcx.	r5,0,r4
+	bne-	10b
+	blr
+
+/*
+ * I/O string operations
+ *
+ * insb(port, buf, len)
+ * outsb(port, buf, len)
+ * insw(port, buf, len)
+ * outsw(port, buf, len)
+ * insl(port, buf, len)
+ * outsl(port, buf, len)
+ * insw_ns(port, buf, len)
+ * outsw_ns(port, buf, len)
+ * insl_ns(port, buf, len)
+ * outsl_ns(port, buf, len)
+ *
+ * The *_ns versions don't do byte-swapping.
+ */
+_GLOBAL(_insb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbz	r5,0(r3)
+	eieio
+	stbu	r5,1(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsb)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,1
+	blelr-
+00:	lbzu	r5,1(r4)
+	stb	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(_insw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhbrx	r5,0,r3
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsw)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	eieio
+	sthbrx	r5,0,r3
+	bdnz	00b
+	blr
+
+_GLOBAL(_insl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwbrx	r5,0,r3
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(_outsl)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stwbrx	r5,0,r3
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insw)
+_GLOBAL(_insw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhz	r5,0(r3)
+	eieio
+	sthu	r5,2(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsw)
+_GLOBAL(_outsw_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,2
+	blelr-
+00:	lhzu	r5,2(r4)
+	sth	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_insl)
+_GLOBAL(_insl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwz	r5,0(r3)
+	eieio
+	stwu	r5,4(r4)
+	bdnz	00b
+	blr
+
+_GLOBAL(__ide_mm_outsl)
+_GLOBAL(_outsl_ns)
+	cmpwi	0,r5,0
+	mtctr	r5
+	subi	r4,r4,4
+	blelr-
+00:	lwzu	r5,4(r4)
+	stw	r5,0(r3)
+	eieio
+	bdnz	00b
+	blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5    has shift count
+ * result in R3/R4
+ *
+ *  ashrdi3: arithmetic right shift (sign propagation)	
+ *  lshrdi3: logical right shift
+ *  ashldi3: left shift
+ */
+_GLOBAL(__ashrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
+	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
+	sraw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(__ashldi3)
+	subfic	r6,r5,32
+	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
+	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
+	or	r3,r3,r6	# MSW |= t1
+	slw	r4,r4,r5	# LSW = LSW << count
+	or	r3,r3,r7	# MSW |= t2
+	blr
+
+_GLOBAL(__lshrdi3)
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	srw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+_GLOBAL(abs)
+	srawi	r4,r3,31
+	xor	r3,r3,r4
+	sub	r3,r3,r4
+	blr
+
+_GLOBAL(_get_SP)
+	mr	r3,r1		/* Close enough */
+	blr
+
+/*
+ * These are used in the alignment trap handler when emulating
+ * single-precision loads and stores.
+ * We restore and save the fpscr so the task gets the same result
+ * and exceptions as if the cpu had performed the load or store.
+ */
+
+#ifdef CONFIG_PPC_FPU
+_GLOBAL(cvt_fd)
+	lfd	0,-4(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfs	0,0(r3)
+	stfd	0,0(r4)
+	mffs	0		/* save new fpscr value */
+	stfd	0,-4(r5)
+	blr
+
+_GLOBAL(cvt_df)
+	lfd	0,-4(r5)	/* load up fpscr value */
+	mtfsf	0xff,0
+	lfd	0,0(r3)
+	stfs	0,0(r4)
+	mffs	0		/* save new fpscr value */
+	stfd	0,-4(r5)
+	blr
+#endif
+
+/*
+ * Create a kernel thread
+ *   kernel_thread(fn, arg, flags)
+ */
+_GLOBAL(kernel_thread)
+	stwu	r1,-16(r1)
+	stw	r30,8(r1)
+	stw	r31,12(r1)
+	mr	r30,r3		/* function */
+	mr	r31,r4		/* argument */
+	ori	r3,r5,CLONE_VM	/* flags */
+	oris	r3,r3,CLONE_UNTRACED>>16
+	li	r4,0		/* new sp (unused) */
+	li	r0,__NR_clone
+	sc
+	cmpwi	0,r3,0		/* parent or child? */
+	bne	1f		/* return if parent */
+	li	r0,0		/* make top-level stack frame */
+	stwu	r0,-16(r1)
+	mtlr	r30		/* fn addr in lr */
+	mr	r3,r31		/* load arg and call fn */
+	PPC440EP_ERR42
+	blrl
+	li	r0,__NR_exit	/* exit if function returns */
+	li	r3,0
+	sc
+1:	lwz	r30,8(r1)
+	lwz	r31,12(r1)
+	addi	r1,r1,16
+	blr
+
+_GLOBAL(execve)
+	li	r0,__NR_execve
+	sc
+	bnslr
+	neg	r3,r3
+	blr
+
+/*
+ * This routine is just here to keep GCC happy - sigh...
+ */
+_GLOBAL(__main)
+	blr