powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

261 files changed, 39502 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h
new file mode 100644
index 000000000000..b70d6e53b303
--- /dev/null
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_POWERPC_8253PIT_H
+#define _ASM_POWERPC_8253PIT_H
+
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#define PIT_TICK_RATE	1193182UL
+
+#endif	/* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
new file mode 100644
index 000000000000..4b0e15206006
--- /dev/null
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions.  It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try.  -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef	struct sys_conf {
+	uint	sc_siumcr;
+	uint	sc_sypcr;
+	uint	sc_swt;
+	char	res1[2];
+	ushort	sc_swsr;
+	uint	sc_sipend;
+	uint	sc_simask;
+	uint	sc_siel;
+	uint	sc_sivec;
+	uint	sc_tesr;
+	char	res2[0xc];
+	uint	sc_sdcr;
+	char	res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+	uint	pcmc_pbr0;
+	uint	pcmc_por0;
+	uint	pcmc_pbr1;
+	uint	pcmc_por1;
+	uint	pcmc_pbr2;
+	uint	pcmc_por2;
+	uint	pcmc_pbr3;
+	uint	pcmc_por3;
+	uint	pcmc_pbr4;
+	uint	pcmc_por4;
+	uint	pcmc_pbr5;
+	uint	pcmc_por5;
+	uint	pcmc_pbr6;
+	uint	pcmc_por6;
+	uint	pcmc_pbr7;
+	uint	pcmc_por7;
+	char	res1[0x20];
+	uint	pcmc_pgcra;
+	uint	pcmc_pgcrb;
+	uint	pcmc_pscr;
+	char	res2[4];
+	uint	pcmc_pipr;
+	char	res3[4];
+	uint	pcmc_per;
+	char	res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	uint	memc_br0;
+	uint	memc_or0;
+	uint	memc_br1;
+	uint	memc_or1;
+	uint	memc_br2;
+	uint	memc_or2;
+	uint	memc_br3;
+	uint	memc_or3;
+	uint	memc_br4;
+	uint	memc_or4;
+	uint	memc_br5;
+	uint	memc_or5;
+	uint	memc_br6;
+	uint	memc_or6;
+	uint	memc_br7;
+	uint	memc_or7;
+	char	res1[0x24];
+	uint	memc_mar;
+	uint	memc_mcr;
+	char	res2[4];
+	uint	memc_mamr;
+	uint	memc_mbmr;
+	ushort	memc_mstat;
+	ushort	memc_mptpr;
+	uint	memc_mdr;
+	char	res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register					16-9
+ */
+#define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
+#define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
+#define BR_PS_MSK	0x00000c00	/* Port Size Mask			*/
+#define BR_PS_32	0x00000000	/* 32 bit port size			*/
+#define BR_PS_16	0x00000800	/* 16 bit port size			*/
+#define BR_PS_8		0x00000400	/*  8 bit port size			*/
+#define BR_PARE		0x00000200	/* Parity Enable			*/
+#define BR_WP		0x00000100	/* Write Protect			*/
+#define BR_MS_MSK	0x000000c0	/* Machine Select Mask			*/
+#define BR_MS_GPCM	0x00000000	/* G.P.C.M. Machine Select		*/
+#define BR_MS_UPMA	0x00000080	/* U.P.M.A Machine Select		*/
+#define BR_MS_UPMB	0x000000c0	/* U.P.M.B Machine Select		*/
+#define BR_V		0x00000001	/* Bank Valid				*/
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register				16-11
+ */
+#define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
+#define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
+#define OR_CSNT_SAM	0x00000800	/* Chip Select Negation Time/ Start	*/
+					/* Address Multiplex			*/
+#define OR_ACS_MSK	0x00000600	/* Address to Chip Select Setup mask	*/
+#define OR_ACS_DIV1	0x00000000	/* CS is output at the same time	*/
+#define OR_ACS_DIV4	0x00000400	/* CS is output 1/4 a clock later	*/
+#define OR_ACS_DIV2	0x00000600	/* CS is output 1/2 a clock later	*/
+#define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
+#define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
+#define OR_BI		0x00000100	/* Burst inhibit			*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
+#define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
+#define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
+#define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
+#define OR_SCY_3_CLK	0x00000030	/* 3 clock cycles wait states		*/
+#define OR_SCY_4_CLK	0x00000040	/* 4 clock cycles wait states		*/
+#define OR_SCY_5_CLK	0x00000050	/* 5 clock cycles wait states		*/
+#define OR_SCY_6_CLK	0x00000060	/* 6 clock cycles wait states		*/
+#define OR_SCY_7_CLK	0x00000070	/* 7 clock cycles wait states		*/
+#define OR_SCY_8_CLK	0x00000080	/* 8 clock cycles wait states		*/
+#define OR_SCY_9_CLK	0x00000090	/* 9 clock cycles wait states		*/
+#define OR_SCY_10_CLK	0x000000a0	/* 10 clock cycles wait states		*/
+#define OR_SCY_11_CLK	0x000000b0	/* 11 clock cycles wait states		*/
+#define OR_SCY_12_CLK	0x000000c0	/* 12 clock cycles wait states		*/
+#define OR_SCY_13_CLK	0x000000d0	/* 13 clock cycles wait states		*/
+#define OR_SCY_14_CLK	0x000000e0	/* 14 clock cycles wait states		*/
+#define OR_SCY_15_CLK	0x000000f0	/* 15 clock cycles wait states		*/
+#define OR_SETA		0x00000008	/* External Transfer Acknowledge	*/
+#define OR_TRLX		0x00000004	/* Timing Relaxed			*/
+#define OR_EHTR		0x00000002	/* Extended Hold Time on Read		*/
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	ushort	sit_tbscr;
+	char	res0[0x02];
+	uint	sit_tbreff0;
+	uint	sit_tbreff1;
+	char	res1[0x14];
+	ushort	sit_rtcsc;
+	char	res2[0x02];
+	uint	sit_rtc;
+	uint	sit_rtsec;
+	uint	sit_rtcal;
+	char	res3[0x10];
+	ushort	sit_piscr;
+	char	res4[2];
+	uint	sit_pitc;
+	uint	sit_pitr;
+	char	res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK	((ushort)0xff00)
+#define TBSCR_REFA		((ushort)0x0080)
+#define TBSCR_REFB		((ushort)0x0040)
+#define TBSCR_REFAE		((ushort)0x0008)
+#define TBSCR_REFBE		((ushort)0x0004)
+#define TBSCR_TBF		((ushort)0x0002)
+#define TBSCR_TBE		((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK	((ushort)0xff00)
+#define RTCSC_SEC		((ushort)0x0080)
+#define RTCSC_ALR		((ushort)0x0040)
+#define RTCSC_38K		((ushort)0x0010)
+#define RTCSC_SIE		((ushort)0x0008)
+#define RTCSC_ALE		((ushort)0x0004)
+#define RTCSC_RTF		((ushort)0x0002)
+#define RTCSC_RTE		((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK		((ushort)0xff00)
+#define PISCR_PS		((ushort)0x0080)
+#define PISCR_PIE		((ushort)0x0004)
+#define PISCR_PTF		((ushort)0x0002)
+#define PISCR_PTE		((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	uint	car_sccr;
+	uint	car_plprcr;
+	uint	car_rsr;
+	char	res[0x74];        /* Reserved area                  */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+	uint	sitk_tbscrk;
+	uint	sitk_tbreff0k;
+	uint	sitk_tbreff1k;
+	uint	sitk_tbk;
+	char	res1[0x10];
+	uint	sitk_rtcsck;
+	uint	sitk_rtck;
+	uint	sitk_rtseck;
+	uint	sitk_rtcalk;
+	char	res2[0x10];
+	uint	sitk_piscrk;
+	uint	sitk_pitck;
+	char	res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+	uint	cark_sccrk;
+	uint	cark_plprcrk;
+	uint	cark_rsrk;
+	char	res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY	((unsigned int)0x55ccaa33)
+
+/* Video interface.  MPC823 Only.
+*/
+typedef struct vid823 {
+	ushort	vid_vccr;
+	ushort	res1;
+	u_char	vid_vsr;
+	u_char	res2;
+	u_char	vid_vcmr;
+	u_char	res3;
+	uint	vid_vbcb;
+	uint	res4;
+	uint	vid_vfcr0;
+	uint	vid_vfaa0;
+	uint	vid_vfba0;
+	uint	vid_vfcr1;
+	uint	vid_vfaa1;
+	uint	vid_vfba1;
+	u_char	res5[0x18];
+} vid823_t;
+
+/* LCD interface.  823 Only.
+*/
+typedef struct lcd {
+	uint	lcd_lccr;
+	uint	lcd_lchcr;
+	uint	lcd_lcvcr;
+	char	res1[4];
+	uint	lcd_lcfaa;
+	uint	lcd_lcfba;
+	char	lcd_lcsr;
+	char	res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+	u_char	i2c_i2mod;
+	char	res1[3];
+	u_char	i2c_i2add;
+	char	res2[3];
+	u_char	i2c_i2brg;
+	char	res3[3];
+	u_char	i2c_i2com;
+	char	res4[3];
+	u_char	i2c_i2cer;
+	char	res5[3];
+	u_char	i2c_i2cmr;
+	char	res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	char	res1[4];
+	uint	sdma_sdar;
+	u_char	sdma_sdsr;
+	char	res3[3];
+	u_char	sdma_sdmr;
+	char	res4[3];
+	u_char	sdma_idsr1;
+	char	res5[3];
+	u_char	sdma_idmr1;
+	char	res6[3];
+	u_char	sdma_idsr2;
+	char	res7[3];
+	u_char	sdma_idmr2;
+	char	res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+	ushort	cpic_civr;
+	char	res[0xe];
+	uint	cpic_cicr;
+	uint	cpic_cipr;
+	uint	cpic_cimr;
+	uint	cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+	ushort	iop_padir;
+	ushort	iop_papar;
+	ushort	iop_paodr;
+	ushort	iop_padat;
+	char	res1[8];
+	ushort	iop_pcdir;
+	ushort	iop_pcpar;
+	ushort	iop_pcso;
+	ushort	iop_pcdat;
+	ushort	iop_pcint;
+	char	res2[6];
+	ushort	iop_pddir;
+	ushort	iop_pdpar;
+	char	res3[2];
+	ushort	iop_pddat;
+	uint	utmode;
+	char	res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	ushort	cpmt_tgcr;
+	char	res1[0xe];
+	ushort	cpmt_tmr1;
+	ushort	cpmt_tmr2;
+	ushort	cpmt_trr1;
+	ushort	cpmt_trr2;
+	ushort	cpmt_tcr1;
+	ushort	cpmt_tcr2;
+	ushort	cpmt_tcn1;
+	ushort	cpmt_tcn2;
+	ushort	cpmt_tmr3;
+	ushort	cpmt_tmr4;
+	ushort	cpmt_trr3;
+	ushort	cpmt_trr4;
+	ushort	cpmt_tcr3;
+	ushort	cpmt_tcr4;
+	ushort	cpmt_tcn3;
+	ushort	cpmt_tcn4;
+	ushort	cpmt_ter1;
+	ushort	cpmt_ter2;
+	ushort	cpmt_ter3;
+	ushort	cpmt_ter4;
+	char	res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc {		/* Serial communication channels */
+	uint	scc_gsmrl;
+	uint	scc_gsmrh;
+	ushort	scc_psmr;
+	char	res1[2];
+	ushort	scc_todr;
+	ushort	scc_dsr;
+	ushort	scc_scce;
+	char	res2[2];
+	ushort	scc_sccm;
+	char	res3;
+	u_char	scc_sccs;
+	char	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	char	res1[2];
+	ushort	smc_smcmr;
+	char	res2[2];
+	u_char	smc_smce;
+	char	res3[3];
+	u_char	smc_smcm;
+	char	res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+	uint	fec_addr_low;		/* lower 32 bits of station address	*/
+	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
+	ushort	res1;			/* reserved				*/
+	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
+	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
+	uint	fec_r_buff_size;	/* Rx buffer size			*/
+	uint	res2[9];		/* reserved				*/
+	uint	fec_ecntrl;		/* ethernet control register		*/
+	uint	fec_ievent;		/* interrupt event register		*/
+	uint	fec_imask;		/* interrupt mask register		*/
+	uint	fec_ivec;		/* interrupt level and vector status	*/
+	uint	fec_r_des_active;	/* Rx ring updated flag			*/
+	uint	fec_x_des_active;	/* Tx ring updated flag			*/
+	uint	res3[10];		/* reserved				*/
+	uint	fec_mii_data;		/* MII data register			*/
+	uint	fec_mii_speed;		/* MII speed control register		*/
+	uint	res4[17];		/* reserved				*/
+	uint	fec_r_bound;		/* end of RAM (read-only)		*/
+	uint	fec_r_fstart;		/* Rx FIFO start address		*/
+	uint	res5[6];		/* reserved				*/
+	uint	fec_x_fstart;		/* Tx FIFO start address		*/
+	uint	res6[17];		/* reserved				*/
+	uint	fec_fun_code;		/* fec SDMA function code		*/
+	uint	res7[3];		/* reserved				*/
+	uint	fec_r_cntrl;		/* Rx control register			*/
+	uint	fec_r_hash;		/* Rx hash register			*/
+	uint	res8[14];		/* reserved				*/
+	uint	fec_x_cntrl;		/* Tx control register			*/
+	uint	res9[0x1e];		/* reserved				*/
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+	fec_t	fl_un_fec;
+	u_char	fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+	/* General control and status registers.
+	*/
+	ushort	cp_cpcr;
+	u_char	res1[2];
+	ushort	cp_rccr;
+	u_char	res2;
+	u_char	cp_rmds;
+	u_char	res3[4];
+	ushort	cp_cpmcr1;
+	ushort	cp_cpmcr2;
+	ushort	cp_cpmcr3;
+	ushort	cp_cpmcr4;
+	u_char	res4[2];
+	ushort	cp_rter;
+	u_char	res5[2];
+	ushort	cp_rtmr;
+	u_char	res6[0x14];
+
+	/* Baud rate generators.
+	*/
+	uint	cp_brgc1;
+	uint	cp_brgc2;
+	uint	cp_brgc3;
+	uint	cp_brgc4;
+
+	/* Serial Communication Channels.
+	*/
+	scc_t	cp_scc[4];
+
+	/* Serial Management Channels.
+	*/
+	smc_t	cp_smc[2];
+
+	/* Serial Peripheral Interface.
+	*/
+	ushort	cp_spmode;
+	u_char	res7[4];
+	u_char	cp_spie;
+	u_char	res8[3];
+	u_char	cp_spim;
+	u_char	res9[2];
+	u_char	cp_spcom;
+	u_char	res10[2];
+
+	/* Parallel Interface Port.
+	*/
+	u_char	res11[2];
+	ushort	cp_pipc;
+	u_char	res12[2];
+	ushort	cp_ptpr;
+	uint	cp_pbdir;
+	uint	cp_pbpar;
+	u_char	res13[2];
+	ushort	cp_pbodr;
+	uint	cp_pbdat;
+
+	/* Port E - MPC87x/88x only.
+	 */
+	uint	cp_pedir;
+	uint	cp_pepar;
+	uint	cp_peso;
+	uint	cp_peodr;
+	uint	cp_pedat;
+
+	/* Communications Processor Timing Register -
+	   Contains RMII Timing for the FECs on MPC87x/88x only.
+	*/
+	uint	cp_cptr;
+
+	/* Serial Interface and Time Slot Assignment.
+	*/
+	uint	cp_simode;
+	u_char	cp_sigmr;
+	u_char	res15;
+	u_char	cp_sistr;
+	u_char	cp_sicmr;
+	u_char	res16[4];
+	uint	cp_sicr;
+	uint	cp_sirp;
+	u_char	res17[0xc];
+
+	/* 256 bytes of MPC823 video controller RAM array.
+	*/
+	u_char	cp_vcram[0x100];
+	u_char	cp_siram[0x200];
+
+	/* The fast ethernet controller is not really part of the CPM,
+	 * but it resides in the address space.
+	 * The LCD color map is also here.
+	 */
+	union	fec_lcd	fl_un;
+#define cp_fec		fl_un.fl_un_fec
+#define lcd_cmap	fl_un.fl_un_cmap
+	char	res18[0xE00];
+
+	/* The DUET family has a second FEC here */
+	fec_t	cp_fec2;
+#define cp_fec1	cp_fec	/* consistency macro */
+
+	/* Dual Ported RAM follows.
+	 * There are many different formats for this memory area
+	 * depending upon the devices used and options chosen.
+	 * Some processors don't have all of it populated.
+	 */
+	u_char	cp_dpmem[0x1C00];	/* BD / Data / ucode */
+	u_char	cp_dparam[0x400];	/* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+	sysconf8xx_t	im_siu_conf;	/* SIU Configuration */
+	pcmconf8xx_t	im_pcmcia;	/* PCMCIA Configuration */
+	memctl8xx_t	im_memctl;	/* Memory Controller */
+	sit8xx_t	im_sit;		/* System integration timers */
+	car8xx_t	im_clkrst;	/* Clocks and reset */
+	sitk8xx_t	im_sitk;	/* Sys int timer keys */
+	cark8xx_t	im_clkrstk;	/* Clocks and reset keys */
+	vid823_t	im_vid;		/* Video (823 only) */
+	lcd823_t	im_lcd;		/* LCD (823 only) */
+	i2c8xx_t	im_i2c;		/* I2C control/status */
+	sdma8xx_t	im_sdma;	/* SDMA control/status */
+	cpic8xx_t	im_cpic;	/* CPM Interrupt Controller */
+	iop8xx_t	im_ioport;	/* IO Port control/status */
+	cpmtimer8xx_t	im_cpmtimer;	/* CPM timers */
+	cpm8xx_t	im_cpm;		/* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
new file mode 100644
index 000000000000..5ab7d7fe198c
--- /dev/null
+++ b/arch/powerpc/include/asm/Kbuild
@@ -0,0 +1,37 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += ioctls.h
+header-y += sembuf.h
+header-y += siginfo.h
+header-y += stat.h
+header-y += errno.h
+header-y += ipcbuf.h
+header-y += msgbuf.h
+header-y += shmbuf.h
+header-y += socket.h
+header-y += termbits.h
+header-y += fcntl.h
+header-y += poll.h
+header-y += sockios.h
+header-y += ucontext.h
+header-y += ioctl.h
+header-y += linkage.h
+header-y += resource.h
+header-y += sigcontext.h
+header-y += statfs.h
+header-y += ps3fb.h
+
+unifdef-y += bootx.h
+unifdef-y += byteorder.h
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += nvram.h
+unifdef-y += param.h
+unifdef-y += posix_types.h
+unifdef-y += seccomp.h
+unifdef-y += signal.h
+unifdef-y += spu_info.h
+unifdef-y += termios.h
+unifdef-y += types.h
+unifdef-y += unistd.h
diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h
new file mode 100644
index 000000000000..89cead6b176e
--- /dev/null
+++ b/arch/powerpc/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_A_OUT_H
+#define _ASM_POWERPC_A_OUT_H
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
new file mode 100644
index 000000000000..98324c5a8286
--- /dev/null
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_ABS_ADDR_H
+#define _ASM_POWERPC_ABS_ADDR_H
+#ifdef __KERNEL__
+
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/lmb.h>
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+
+struct mschunks_map {
+        unsigned long num_chunks;
+        unsigned long chunk_size;
+        unsigned long chunk_shift;
+        unsigned long chunk_mask;
+        u32 *mapping;
+};
+
+extern struct mschunks_map mschunks_map;
+
+/* Chunks are 256 KB */
+#define MSCHUNKS_CHUNK_SHIFT	(18)
+#define MSCHUNKS_CHUNK_SIZE	(1UL << MSCHUNKS_CHUNK_SHIFT)
+#define MSCHUNKS_OFFSET_MASK	(MSCHUNKS_CHUNK_SIZE - 1)
+
+static inline unsigned long chunk_to_addr(unsigned long chunk)
+{
+	return chunk << MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long addr_to_chunk(unsigned long addr)
+{
+	return addr >> MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long phys_to_abs(unsigned long pa)
+{
+	unsigned long chunk;
+
+	/* This is a no-op on non-iSeries */
+	if (!firmware_has_feature(FW_FEATURE_ISERIES))
+		return pa;
+
+	chunk = addr_to_chunk(pa);
+
+	if (chunk < mschunks_map.num_chunks)
+		chunk = mschunks_map.mapping[chunk];
+
+	return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
+}
+
+/* Convenience macros */
+#define virt_to_abs(va) phys_to_abs(__pa(va))
+#define abs_to_virt(aa) __va(aa)
+
+/*
+ * Converts Virtual Address to Real Address for
+ * Legacy iSeries Hypervisor calls
+ */
+#define iseries_hv_addr(virtaddr)	\
+	(0x8000000000000000 | virt_to_abs(virtaddr))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
new file mode 100644
index 000000000000..86455c4c31ee
--- /dev/null
+++ b/arch/powerpc/include/asm/agp.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_AGP_H
+#define _ASM_POWERPC_AGP_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_AGP_H */
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
new file mode 100644
index 000000000000..8f0fe7971949
--- /dev/null
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -0,0 +1,69 @@
+#ifndef _ASM_POWERPC_ASM_COMPAT_H
+#define _ASM_POWERPC_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+
+#ifdef __powerpc64__
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(ld)
+#define PPC_STL		stringify_in_c(std)
+#define PPC_LCMPI	stringify_in_c(cmpdi)
+#define PPC_LONG	stringify_in_c(.llong)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
+#define PPC_TLNEI	stringify_in_c(tdnei)
+#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_STLCX	stringify_in_c(stdcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzd)
+
+/* Move to CR, single-entry optimized version. Only available
+ * on POWER4 and later.
+ */
+#ifdef CONFIG_POWER4_ONLY
+#define PPC_MTOCRF	stringify_in_c(mtocrf)
+#else
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+#endif
+
+#else /* 32-bit */
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(lwz)
+#define PPC_STL		stringify_in_c(stw)
+#define PPC_LCMPI	stringify_in_c(cmpwi)
+#define PPC_LONG	stringify_in_c(.long)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
+#define PPC_TLNEI	stringify_in_c(twnei)
+#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_STLCX	stringify_in_c(stwcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzw)
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+
+#endif
+
+#ifdef __KERNEL__
+#ifdef CONFIG_IBM405_ERR77
+/* Erratum #77 on the 405 means we need a sync or dcbt before every
+ * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
+ */
+#define PPC405_ERR77(ra,rb)	stringify_in_c(dcbt	ra, rb;)
+#define	PPC405_ERR77_SYNC	stringify_in_c(sync;)
+#else
+#define PPC405_ERR77(ra,rb)
+#define PPC405_ERR77_SYNC
+#endif
+#endif
+
+#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
new file mode 100644
index 000000000000..f3fc733758f5
--- /dev/null
+++ b/arch/powerpc/include/asm/atomic.h
@@ -0,0 +1,479 @@
+#ifndef _ASM_POWERPC_ATOMIC_H_
+#define _ASM_POWERPC_ATOMIC_H_
+
+/*
+ * PowerPC atomic operations
+ */
+
+typedef struct { int counter; } atomic_t;
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i)		{ (i) }
+
+static __inline__ int atomic_read(const atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i)
+{
+	__asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_add\n\
+	add	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_sub\n\
+	subf	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_inc\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_dec\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%2)\
+"	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define smp_mb__before_atomic_dec()     smp_mb()
+#define smp_mb__after_atomic_dec()      smp_mb()
+#define smp_mb__before_atomic_inc()     smp_mb()
+#define smp_mb__after_atomic_inc()      smp_mb()
+
+#ifdef __powerpc64__
+
+typedef struct { long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static __inline__ long atomic64_read(const atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic64_set(atomic64_t *v, long i)
+{
+	__asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic64_add(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_add\n\
+	add	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_add_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_add_return\n\
+	add	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+
+static __inline__ void atomic64_sub(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_sub\n\
+	subf	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
+	subf	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic64_inc(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_inc\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_inc_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+static __inline__ void atomic64_dec(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_dec\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_dec_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
+	addic.	%0,%0,-1\n\
+	blt-	2f\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic_add_unless\n\
+	cmpd	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+"	stdcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#endif /* __powerpc64__ */
+
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/asm/auxvec.h
new file mode 100644
index 000000000000..19a099b62cd6
--- /dev/null
+++ b/arch/powerpc/include/asm/auxvec.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_POWERPC_AUXVEC_H
+#define _ASM_POWERPC_AUXVEC_H
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+/* The vDSO location. We have to use the same value as x86 for glibc's
+ * sake :-)
+ */
+#define AT_SYSINFO_EHDR		33
+
+#endif
diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
new file mode 100644
index 000000000000..8cf5c37c3817
--- /dev/null
+++ b/arch/powerpc/include/asm/backlight.h
@@ -0,0 +1,41 @@
+/*
+ * Routines for handling backlight control on PowerBooks
+ *
+ * For now, implementation resides in
+ * arch/powerpc/platforms/powermac/backlight.c
+ *
+ */
+#ifndef __ASM_POWERPC_BACKLIGHT_H
+#define __ASM_POWERPC_BACKLIGHT_H
+#ifdef __KERNEL__
+
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+/* For locking instructions, see the implementation file */
+extern struct backlight_device *pmac_backlight;
+extern struct mutex pmac_backlight_mutex;
+
+extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
+
+extern int pmac_has_backlight_type(const char *type);
+
+extern void pmac_backlight_key(int direction);
+static inline void pmac_backlight_key_up(void)
+{
+	pmac_backlight_key(0);
+}
+static inline void pmac_backlight_key_down(void)
+{
+	pmac_backlight_key(1);
+}
+
+extern void pmac_backlight_set_legacy_brightness_pmu(int brightness);
+extern int pmac_backlight_set_legacy_brightness(int brightness);
+extern int pmac_backlight_get_legacy_brightness(void);
+
+extern void pmac_backlight_enable(void);
+extern void pmac_backlight_disable(void);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
new file mode 100644
index 000000000000..897eade3afbe
--- /dev/null
+++ b/arch/powerpc/include/asm/bitops.h
@@ -0,0 +1,410 @@
+/*
+ * PowerPC atomic bit operations.
+ *
+ * Merged version by David Gibson <david@gibson.dropbear.id.au>.
+ * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don
+ * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard.  They
+ * originally took it from the ppc32 code.
+ *
+ * Within a word, bits are numbered LSB first.  Lot's of places make
+ * this assumption by directly testing bits with (val & (1<<nr)).
+ * This can cause confusion for large (> 1 word) bitmaps on a
+ * big-endian system because, unlike little endian, the number of each
+ * bit depends on the word size.
+ *
+ * The bitop functions are defined to work on unsigned longs, so for a
+ * ppc64 system the bits end up numbered:
+ *   |63..............0|127............64|191...........128|255...........196|
+ * and on ppc32:
+ *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
+ *
+ * There are a few little-endian macros used mostly for filesystem
+ * bitmaps, these work on similar bit arrays layouts, but
+ * byte-oriented:
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
+ * number field needs to be reversed compared to the big-endian bit
+ * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_BITOPS_H
+#define _ASM_POWERPC_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+#define BITOP_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+
+static __inline__ void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
+	"or	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
+	"xor	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ int test_and_set_bit(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_set_bit_lock(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(unsigned long nr,
+					 volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
+	"andc	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(unsigned long nr,
+					  volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
+	"xor	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
+{
+        unsigned long old;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
+	"or	%0,%0,%2\n"
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*addr)
+	: "r" (mask), "r" (addr)
+	: "cc");
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__clear_bit(nr, addr);
+}
+
+/*
+ * Return the zero-based bit position (LE, not IBM bit numbering) of
+ * the most significant 1-bit in a double word.
+ */
+static __inline__ __attribute__((const))
+int __ilog2(unsigned long x)
+{
+	int lz;
+
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
+	return BITS_PER_LONG - 1 - lz;
+}
+
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	int bit;
+	asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
+	return 31 - bit;
+}
+
+#ifdef __powerpc64__
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	int bit;
+	asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
+	return 63 - bit;
+}
+#endif
+
+/*
+ * Determines the bit position of the least significant 0 bit in the
+ * specified double word. The returned bit position will be
+ * zero-based, starting from the right side (63/31 - 0).
+ */
+static __inline__ unsigned long ffz(unsigned long x)
+{
+	/* no zero exists anywhere in the 8 byte area. */
+	if ((x = ~x) == 0)
+		return BITS_PER_LONG;
+
+	/*
+	 * Calculate the bit position of the least signficant '1' bit in x
+	 * (since x has been changed this will actually be the least signficant
+	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
+	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
+	 */
+	return __ilog2(x & -x);
+}
+
+static __inline__ int __ffs(unsigned long x)
+{
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	unsigned long i = (unsigned long)x;
+	return __ilog2(i & -i) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static __inline__ int fls(unsigned int x)
+{
+	int lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+	return 32 - lz;
+}
+
+static __inline__ unsigned long __fls(unsigned long x)
+{
+	return __ilog2(x);
+}
+
+/*
+ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
+ * instruction; for 32-bit we use the generic version, which does two
+ * 32-bit fls calls.
+ */
+#ifdef __powerpc64__
+static __inline__ int fls64(__u64 x)
+{
+	int lz;
+
+	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+	return 64 - lz;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif /* __powerpc64__ */
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/find.h>
+
+/* Little-endian versions */
+
+static __inline__ int test_le_bit(unsigned long nr,
+				  __const__ unsigned long *addr)
+{
+	__const__ unsigned char	*tmp = (__const__ unsigned char *) addr;
+	return (tmp[nr >> 3] >> (nr & 7)) & 1;
+}
+
+#define __set_le_bit(nr, addr) \
+	__set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __clear_le_bit(nr, addr) \
+	__clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define test_and_set_le_bit(nr, addr) \
+	test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define test_and_clear_le_bit(nr, addr) \
+	test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define __test_and_set_le_bit(nr, addr) \
+	__test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __test_and_clear_le_bit(nr, addr) \
+	__test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0)
+unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+
+unsigned long generic_find_next_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+/* Bitmap functions for the ext2 filesystem */
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+	test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+	test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
+
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	generic_find_next_zero_le_bit((unsigned long*)addr, size, off)
+
+#define ext2_find_next_bit(addr, size, off) \
+	generic_find_next_le_bit((unsigned long *)addr, size, off)
+/* Bitmap functions for the minix filesystem.  */
+
+#define minix_test_and_set_bit(nr,addr) \
+	__test_and_set_le_bit(nr, (unsigned long *)addr)
+#define minix_set_bit(nr,addr) \
+	__set_le_bit(nr, (unsigned long *)addr)
+#define minix_test_and_clear_bit(nr,addr) \
+	__test_and_clear_le_bit(nr, (unsigned long *)addr)
+#define minix_test_bit(nr,addr) \
+	test_le_bit(nr, (unsigned long *)addr)
+
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_le_bit((unsigned long *)addr, size)
+
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_BITOPS_H */
diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h
new file mode 100644
index 000000000000..57b82e3f89ce
--- /dev/null
+++ b/arch/powerpc/include/asm/bootx.h
@@ -0,0 +1,171 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#include <asm/types.h>
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58    ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION               5
+#define BOOT_INFO_COMPATIBLE_VERSION    1
+
+/* Bit in the architecture flag mask. More to be defined in
+   future versions. Note that either BOOT_ARCH_PCI or
+   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+   set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI                   0x00000001UL
+#define BOOT_ARCH_NUBUS                 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
+
+/*  Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE				26
+
+/* This is the format of an element in the physical memory map. Note that
+   the map is optional and current BootX will only build it for pre-PCI
+   machines */
+typedef struct boot_info_map_entry
+{
+    __u32       physAddr;                /* Physical starting address */
+    __u32       size;                    /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+    /* Version of this structure */
+    __u32       version;
+    /* backward compatible down to version: */
+    __u32       compatible_version;
+
+    /* NEW (vers. 2) this holds the current _logical_ base addr of
+       the frame buffer (for use by early boot message) */
+    __u8*       logicalDisplayBase;
+
+    /* NEW (vers. 4) Apple's machine identification */
+    __u32       machineID;
+
+    /* NEW (vers. 4) Detected hw architecture */
+    __u32       architecture;
+
+    /* The device tree (internal addresses relative to the beginning of the tree,
+     * device tree offset relative to the beginning of this structure).
+     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+     * field is 0.
+     */
+    __u32       deviceTreeOffset;        /* Device tree offset */
+    __u32       deviceTreeSize;          /* Size of the device tree */
+
+    /* Some infos about the current MacOS display */
+    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
+    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
+    __u8*       dispDeviceBase;          /* base address (physical) */
+    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
+    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
+    /* Optional offset in the registry to the current
+     * MacOS display. (Can be 0 when not detected) */
+     __u32      dispDeviceRegEntryOffset;
+
+    /* Optional pointer to boot ramdisk (offset from this structure) */
+    __u32       ramDisk;
+    __u32       ramDiskSize;             /* size of ramdisk image */
+
+    /* Kernel command line arguments (offset from this structure) */
+    __u32       kernelParamsOffset;
+
+    /* ALL BELOW NEW (vers. 4) */
+
+    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       device-tree. */
+    boot_info_map_entry_t
+    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+    __u32       physMemoryMapSize;               /* How many entries in map */
+
+
+    /* The framebuffer size (optional, currently 0) */
+    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
+
+    /* NEW (vers. 5) */
+
+    /* Total params size (args + colormap + device tree + ramdisk) */
+    __u32       totalParamsSize;
+
+} boot_infos_t;
+
+#ifdef __KERNEL__
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
+ * is represented by 3 short words containing a 16 bits (unsigned) color
+ * component. Later versions may contain the gamma table for direct-color
+ * devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
+
+/* BootX passes the device-tree using a format that comes from earlier
+ * ppc32 kernels. This used to match what is in prom.h, but not anymore
+ * so we now define it here
+ */
+struct bootx_dt_prop {
+	u32	name;
+	int	length;
+	u32	value;
+	u32	next;
+};
+
+struct bootx_dt_node {
+	u32	unused0;
+	u32	unused1;
+	u32	phandle;	/* not really available */
+	u32	unused2;
+	u32	unused3;
+	u32	unused4;
+	u32	unused5;
+	u32	full_name;
+	u32	properties;
+	u32	parent;
+	u32	child;
+	u32	sibling;
+	u32	next;
+	u32	allnext;
+};
+
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+#endif /* __KERNEL__ */
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h
new file mode 100644
index 000000000000..906f46e31006
--- /dev/null
+++ b/arch/powerpc/include/asm/btext.h
@@ -0,0 +1,28 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+extern int btext_find_display(int allow_nonstdout);
+extern void btext_update_display(unsigned long phys, int width, int height,
+				 int depth, int pitch);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+				unsigned long address);
+extern void btext_prepare_BAT(void);
+extern void btext_unmap(void);
+
+extern void btext_drawchar(char c);
+extern void btext_drawstring(const char *str);
+extern void btext_drawhex(unsigned long v);
+extern void btext_drawtext(const char *c, unsigned int len);
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+extern void btext_flushline(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
new file mode 100644
index 000000000000..e55d1f66b86f
--- /dev/null
+++ b/arch/powerpc/include/asm/bug.h
@@ -0,0 +1,121 @@
+#ifndef _ASM_POWERPC_BUG_H
+#define _ASM_POWERPC_BUG_H
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+/*
+ * Define an illegal instr to trap on the bug.
+ * We don't use 0 because that marks the end of a function
+ * in the ELF ABI.  That's "Boo Boo" in case you wonder...
+ */
+#define BUG_OPCODE .long 0x00b00b00  /* For asm */
+#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
+
+#ifdef CONFIG_BUG
+
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+.macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr, 5002f
+	 .short \line, \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+	 .section .rodata,"a"
+5002:	 .asciz "\file"
+	 .previous
+.endm
+#else
+ .macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr
+	 .short \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+.endm
+#endif /* verbose */
+
+#else /* !__ASSEMBLY__ */
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+   sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b, %0\n"		\
+	"\t.short %1, %2\n"			\
+	".org 2b+%3\n"				\
+	".previous\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b\n"			\
+	"\t.short %2\n"				\
+	".org 2b+%3\n"				\
+	".previous\n"
+#endif
+
+/*
+ * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
+ * optimisations. However depending on the complexity of the condition
+ * some compiler versions may not produce optimal results.
+ */
+
+#define BUG() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		    "i" (0), "i"  (sizeof(struct bug_entry)));	\
+	for(;;) ;						\
+} while (0)
+
+#define BUG_ON(x) do {						\
+	if (__builtin_constant_p(x)) {				\
+		if (x)						\
+			BUG();					\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__), "i" (0),	\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" ((__force long)(x)));			\
+	}							\
+} while (0)
+
+#define __WARN() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)));		\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" (__ret_warn_on));				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#endif /* __ASSEMBLY __ */
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_BUG_H */
diff --git a/arch/powerpc/include/asm/bugs.h b/arch/powerpc/include/asm/bugs.h
new file mode 100644
index 000000000000..42fdb73e3068
--- /dev/null
+++ b/arch/powerpc/include/asm/bugs.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_POWERPC_BUGS_H
+#define _ASM_POWERPC_BUGS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* _ASM_POWERPC_BUGS_H */
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
new file mode 100644
index 000000000000..b37752214a16
--- /dev/null
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_POWERPC_BYTEORDER_H
+#define _ASM_POWERPC_BYTEORDER_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+static __inline__ __u16 ld_le16(const volatile __u16 *addr)
+{
+	__u16 val;
+
+	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
+{
+	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __u32 ld_le32(const volatile __u32 *addr)
+{
+	__u32 val;
+
+	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
+{
+	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+	__u16 result;
+
+	__asm__("rlwimi %0,%1,8,16,23"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 8));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+	__u32 result;
+
+	__asm__("rlwimi %0,%1,24,16,23\n\t"
+	    "rlwimi %0,%1,8,8,15\n\t"
+	    "rlwimi %0,%1,24,0,7"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 24));
+	return result;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#ifndef __STRICT_ANSI__
+#define __BYTEORDER_HAS_U64__
+#ifndef __powerpc64__
+#define __SWAB_64_THRU_32__
+#endif /* __powerpc64__ */
+#endif /* __STRICT_ANSI__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
new file mode 100644
index 000000000000..81de6eb3455d
--- /dev/null
+++ b/arch/powerpc/include/asm/cache.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_POWERPC_CACHE_H
+#define _ASM_POWERPC_CACHE_H
+
+#ifdef __KERNEL__
+
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_SHIFT		4
+#define MAX_COPY_PREFETCH	1
+#elif defined(CONFIG_PPC_E500MC)
+#define L1_CACHE_SHIFT		6
+#define MAX_COPY_PREFETCH	4
+#elif defined(CONFIG_PPC32)
+#define L1_CACHE_SHIFT		5
+#define MAX_COPY_PREFETCH	4
+#else /* CONFIG_PPC64 */
+#define L1_CACHE_SHIFT		7
+#endif
+
+#define	L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define	SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
+struct ppc64_caches {
+	u32	dsize;			/* L1 d-cache size */
+	u32	dline_size;		/* L1 d-cache line size	*/
+	u32	log_dline_size;
+	u32	dlines_per_page;
+	u32	isize;			/* L1 i-cache size */
+	u32	iline_size;		/* L1 i-cache line size	*/
+	u32	log_iline_size;
+	u32	ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+
+#if !defined(__ASSEMBLY__)
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..ba667a383b8c
--- /dev/null
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -0,0 +1,75 @@
+/*
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_CACHEFLUSH_H
+#define _ASM_POWERPC_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are changed,
+ * because the caches on PowerPCs are physically addressed.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		__flush_icache_range(start, stop);
+}
+
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+extern void __flush_dcache_icache(void *page_va);
+extern void flush_dcache_icache_page(struct page *page);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CONFIG_PPC32
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#endif /* CONFIG_PPC32 */
+#ifdef CONFIG_PPC64
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+#endif
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do { \
+		memcpy(dst, src, len); \
+		flush_icache_user_range(vma, page, vaddr, len); \
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h
new file mode 100644
index 000000000000..8066eede3a0c
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-pmu.h
@@ -0,0 +1,105 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author:
+ *   David Erb (djerb@us.ibm.com)
+ *   Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+#define PM07_CTR_INPUT_MUX(x)              (((x) & 0x3F) << 26)
+#define PM07_CTR_INPUT_CONTROL(x)          (((x) & 1) << 25)
+#define PM07_CTR_POLARITY(x)               (((x) & 1) << 24)
+#define PM07_CTR_COUNT_CYCLES(x)           (((x) & 1) << 23)
+#define PM07_CTR_ENABLE(x)                 (((x) & 1) << 22)
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
+
+enum pm_reg_name {
+	group_control,
+	debug_bus_control,
+	trace_address,
+	ext_tr_timer,
+	pm_status,
+	pm_control,
+	pm_interval,
+	pm_start_stop,
+};
+
+/* Routines for reading/writing the PMU registers. */
+extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+extern void cbe_disable_pm_interrupts(u32 cpu);
+extern u32  cbe_get_and_clear_pm_interrupts(u32 cpu);
+extern void cbe_sync_irq(int node);
+
+#define CBE_COUNT_SUPERVISOR_MODE       0
+#define CBE_COUNT_HYPERVISOR_MODE       1
+#define CBE_COUNT_PROBLEM_MODE          2
+#define CBE_COUNT_ALL_MODES             3
+
+#endif /* __ASM_CELL_PMU_H__ */
diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
new file mode 100644
index 000000000000..fd6fd00434ef
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -0,0 +1,315 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ *          David J. Erb (djerb@us.ibm.com)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+#include <asm/cell-pmu.h>
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
+
+#define MAX_CBE		2
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+union spe_reg {
+	u64 val;
+	u8 spe[8];
+};
+
+union ppe_spe_reg {
+	u64 val;
+	struct {
+		u32 ppe;
+		u32 spe;
+	};
+};
+
+
+struct cbe_pmd_regs {
+	/* Debug Bus Control */
+	u64	pad_0x0000;					/* 0x0000 */
+
+	u64	group_control;					/* 0x0008 */
+
+	u8	pad_0x0010_0x00a8 [0x00a8 - 0x0010];		/* 0x0010 */
+
+	u64	debug_bus_control;				/* 0x00a8 */
+
+	u8	pad_0x00b0_0x0100 [0x0100 - 0x00b0];		/* 0x00b0 */
+
+	u64	trace_aux_data;					/* 0x0100 */
+	u64	trace_buffer_0_63;				/* 0x0108 */
+	u64	trace_buffer_64_127;				/* 0x0110 */
+	u64	trace_address;					/* 0x0118 */
+	u64	ext_tr_timer;					/* 0x0120 */
+
+	u8	pad_0x0128_0x0400 [0x0400 - 0x0128];		/* 0x0128 */
+
+	/* Performance Monitor */
+	u64	pm_status;					/* 0x0400 */
+	u64	pm_control;					/* 0x0408 */
+	u64	pm_interval;					/* 0x0410 */
+	u64	pm_ctr[4];					/* 0x0418 */
+	u64	pm_start_stop;					/* 0x0438 */
+	u64	pm07_control[8];				/* 0x0440 */
+
+	u8	pad_0x0480_0x0800 [0x0800 - 0x0480];		/* 0x0480 */
+
+	/* Thermal Sensor Registers */
+	union	spe_reg	ts_ctsr1;				/* 0x0800 */
+	u64	ts_ctsr2;					/* 0x0808 */
+	union	spe_reg	ts_mtsr1;				/* 0x0810 */
+	u64	ts_mtsr2;					/* 0x0818 */
+	union	spe_reg	ts_itr1;				/* 0x0820 */
+	u64	ts_itr2;					/* 0x0828 */
+	u64	ts_gitr;					/* 0x0830 */
+	u64	ts_isr;						/* 0x0838 */
+	u64	ts_imr;						/* 0x0840 */
+	union	spe_reg	tm_cr1;					/* 0x0848 */
+	u64	tm_cr2;						/* 0x0850 */
+	u64	tm_simr;					/* 0x0858 */
+	union	ppe_spe_reg tm_tpr;				/* 0x0860 */
+	union	spe_reg	tm_str1;				/* 0x0868 */
+	u64	tm_str2;					/* 0x0870 */
+	union	ppe_spe_reg tm_tsr;				/* 0x0878 */
+
+	/* Power Management */
+	u64	pmcr;						/* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL	0x10000
+	u64	pmsr;						/* 0x0888 */
+
+	/* Time Base Register */
+	u64	tbr;						/* 0x0890 */
+
+	u8	pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
+
+	/* Fault Isolation Registers */
+	u64	checkstop_fir;					/* 0x0c00 */
+	u64	recoverable_fir;				/* 0x0c08 */
+	u64	spec_att_mchk_fir;				/* 0x0c10 */
+	u32	fir_mode_reg;					/* 0x0c18 */
+	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8		0x00800
+	u64	fir_enable_mask;				/* 0x0c20 */
+
+	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
+	u64	ras_esc_0;					/* 0x0ca8 */
+	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ * PMU shadow registers
+ *
+ * Many of the registers in the performance monitoring unit are write-only,
+ * so we need to save a copy of what we write to those registers.
+ *
+ * The actual data counters are read/write. However, writing to the counters
+ * only takes effect if the PMU is enabled. Otherwise the value is stored in
+ * a hardware latch until the next time the PMU is enabled. So we save a copy
+ * of the counter values if we need to read them back while the PMU is
+ * disabled. The counter_value_in_latch field is a bitmap indicating which
+ * counters currently have a value waiting to be written.
+ */
+
+struct cbe_pmd_shadow_regs {
+	u32 group_control;
+	u32 debug_bus_control;
+	u32 trace_address;
+	u32 ext_tr_timer;
+	u32 pm_status;
+	u32 pm_control;
+	u32 pm_interval;
+	u32 pm_start_stop;
+	u32 pm07_control[NR_CTRS];
+
+	u32 pm_ctr[NR_PHYS_CTRS];
+	u32 counter_value_in_latch;
+};
+
+extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
+extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID	0x80
+#define CBE_IIC_IRQ_IPI		0x40
+
+struct cbe_iic_thread_regs {
+	struct cbe_iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct cbe_iic_regs {
+	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
+
+	/* IIC interrupt registers */
+	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+
+	u64	iic_ir;						/* 0x0440 */
+#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0        0x0
+#define CBE_IIC_IR_IOC_1S       0xb
+#define CBE_IIC_IR_PT_0         0xe
+#define CBE_IIC_IR_PT_1         0xf
+
+	u64	iic_is;						/* 0x0448 */
+#define CBE_IIC_IS_PMI		0x2
+
+	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
+
+	/* IOC FIR */
+	u64	ioc_fir_reset;					/* 0x0500 */
+	u64	ioc_fir_set;					/* 0x0508 */
+	u64	ioc_checkstop_enable;				/* 0x0510 */
+	u64	ioc_fir_error_mask;				/* 0x0518 */
+	u64	ioc_syserr_enable;				/* 0x0520 */
+	u64	ioc_fir;					/* 0x0528 */
+
+	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+struct cbe_mic_tm_regs {
+	u8	pad_0x0000_0x0040[0x0040 - 0x0000];		/* 0x0000 */
+
+	u64	mic_ctl_cnfg2;					/* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC		0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2	0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP	0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT	0x0080000000000000LL
+
+	u64	pad_0x0048;					/* 0x0048 */
+
+	u64	mic_aux_trc_base;				/* 0x0050 */
+	u64	mic_aux_trc_max_addr;				/* 0x0058 */
+	u64	mic_aux_trc_cur_addr;				/* 0x0060 */
+	u64	mic_aux_trc_grf_addr;				/* 0x0068 */
+	u64	mic_aux_trc_grf_data;				/* 0x0070 */
+
+	u64	pad_0x0078;					/* 0x0078 */
+
+	u64	mic_ctl_cnfg_0;					/* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0	0x8000000000000000LL
+
+	u64	pad_0x0088;					/* 0x0088 */
+
+	u64	slow_fast_timer_0;				/* 0x0090 */
+	u64	slow_next_timer_0;				/* 0x0098 */
+
+	u8	pad_0x00a0_0x00f8[0x00f8 - 0x00a0];		/* 0x00a0 */
+	u64    	mic_df_ecc_address_0;				/* 0x00f8 */
+
+	u8	pad_0x0100_0x01b8[0x01b8 - 0x0100];		/* 0x0100 */
+	u64    	mic_df_ecc_address_1;				/* 0x01b8 */
+
+	u64	mic_ctl_cnfg_1;					/* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1	0x8000000000000000LL
+
+	u64	pad_0x01c8;					/* 0x01c8 */
+
+	u64	slow_fast_timer_1;				/* 0x01d0 */
+	u64	slow_next_timer_1;				/* 0x01d8 */
+
+	u8	pad_0x01e0_0x0208[0x0208 - 0x01e0];		/* 0x01e0 */
+	u64	mic_exc;					/* 0x0208 */
+#define CBE_MIC_EXC_BLOCK_SCRUB		0x0800000000000000ULL
+#define CBE_MIC_EXC_FAST_SCRUB		0x0100000000000000ULL
+
+	u64	mic_mnt_cfg;					/* 0x0210 */
+#define CBE_MIC_MNT_CFG_CHAN_0_POP	0x0002000000000000ULL
+#define CBE_MIC_MNT_CFG_CHAN_1_POP	0x0004000000000000ULL
+
+	u64	mic_df_config;					/* 0x0218 */
+#define CBE_MIC_ECC_DISABLE_0		0x4000000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_0	0x2000000000000000ULL
+#define CBE_MIC_ECC_DISABLE_1		0x0080000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_1	0x0040000000000000ULL
+
+	u8	pad_0x0220_0x0230[0x0230 - 0x0220];		/* 0x0220 */
+	u64	mic_fir;					/* 0x0230 */
+#define CBE_MIC_FIR_ECC_SINGLE_0_ERR	0x0200000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_ERR	0x0100000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_ERR	0x0080000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_ERR	0x0040000000000000ULL
+#define CBE_MIC_FIR_ECC_ERR_MASK	0xffff000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_CTE	0x0000020000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_CTE	0x0000010000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_CTE	0x0000008000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_CTE	0x0000004000000000ULL
+#define CBE_MIC_FIR_ECC_CTE_MASK	0x0000ffff00000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_RESET	0x0000000002000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_RESET	0x0000000001000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_RESET	0x0000000000800000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_RESET	0x0000000000400000ULL
+#define CBE_MIC_FIR_ECC_RESET_MASK	0x00000000ffff0000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_SET	0x0000000000000200ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_SET	0x0000000000000100ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_SET	0x0000000000000080ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_SET	0x0000000000000040ULL
+#define CBE_MIC_FIR_ECC_SET_MASK	0x000000000000ffffULL
+	u64	mic_fir_debug;					/* 0x0238 */
+
+	u8	pad_0x0240_0x1000[0x1000 - 0x0240];		/* 0x0240 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
new file mode 100644
index 000000000000..7cdf358337cf
--- /dev/null
+++ b/arch/powerpc/include/asm/checksum.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_CHECKSUM_H
+#define _ASM_POWERPC_CHECKSUM_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively (if that pointer is not
+ * NULL), and, for an error on src, zeroes the rest of dst.
+ *
+ * Like csum_partial, this must be called with even lengths,
+ * except for the last fragment.
+ */
+extern __wsum csum_partial_copy_generic(const void *src, void *dst,
+					      int len, __wsum sum,
+					      int *src_err, int *dst_err);
+/*
+ * the same as csum_partial, but copies from src to dst while it
+ * checksums.
+ */
+#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
+        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)   \
+        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	/* swap the two 16-bit halves of sum */
+	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+	/* if there is a carry from adding the two 16-bit halves,
+	   it will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                                     unsigned short len,
+                                     unsigned short proto,
+                                     __wsum sum)
+{
+#ifdef __powerpc64__
+	unsigned long s = (__force u32)sum;
+
+	s += (__force u32)saddr;
+	s += (__force u32)daddr;
+	s += proto + len;
+	s += (s >> 32);
+	return (__force __wsum) s;
+#else
+    __asm__("\n\
+	addc %0,%0,%1 \n\
+	adde %0,%0,%2 \n\
+	adde %0,%0,%3 \n\
+	addze %0,%0 \n\
+	"
+	: "=r" (sum)
+	: "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum));
+	return sum;
+#endif
+}
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
new file mode 100644
index 000000000000..ab1882c1e176
--- /dev/null
+++ b/arch/powerpc/include/asm/clk_interface.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_POWERPC_CLK_INTERFACE_H
+#define __ASM_POWERPC_CLK_INTERFACE_H
+
+#include <linux/clk.h>
+
+struct clk_interface {
+	struct clk*	(*clk_get)	(struct device *dev, const char *id);
+	int		(*clk_enable)	(struct clk *clk);
+	void		(*clk_disable)	(struct clk *clk);
+	unsigned long	(*clk_get_rate)	(struct clk *clk);
+	void		(*clk_put)	(struct clk *clk);
+	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
+	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
+	struct clk*	(*clk_get_parent) (struct clk *clk);
+};
+
+extern struct clk_interface clk_functions;
+
+#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
new file mode 100644
index 000000000000..107d9b915e33
--- /dev/null
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_CODE_PATCHING_H
+#define _ASM_POWERPC_CODE_PATCHING_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+#define PPC_NOP_INSTR		0x60000000
+#define PPC_LWSYNC_INSTR	0x7c2004ac
+
+/* Flags for create_branch:
+ * "b"   == create_branch(addr, target, 0);
+ * "ba"  == create_branch(addr, target, BRANCH_ABSOLUTE);
+ * "bl"  == create_branch(addr, target, BRANCH_SET_LINK);
+ * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
+ */
+#define BRANCH_SET_LINK	0x1
+#define BRANCH_ABSOLUTE	0x2
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags);
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags);
+void patch_branch(unsigned int *addr, unsigned long target, int flags);
+void patch_instruction(unsigned int *addr, unsigned int instr);
+
+int instr_is_relative_branch(unsigned int instr);
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
+unsigned long branch_target(const unsigned int *instr);
+unsigned int translate_branch(const unsigned int *dest,
+			      const unsigned int *src);
+
+static inline unsigned long ppc_function_entry(void *func)
+{
+#ifdef CONFIG_PPC64
+	/*
+	 * On PPC64 the function pointer actually points to the function's
+	 * descriptor. The first entry in the descriptor is the address
+	 * of the function text.
+	 */
+	return ((func_descr_t *)func)->entry;
+#else
+	return (unsigned long)func;
+#endif
+}
+
+#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
new file mode 100644
index 000000000000..d811a8cd7b58
--- /dev/null
+++ b/arch/powerpc/include/asm/compat.h
@@ -0,0 +1,214 @@
+#ifndef _ASM_POWERPC_COMPAT_H
+#define _ASM_POWERPC_COMPAT_H
+#ifdef __KERNEL__
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u32		__compat_uid_t;
+typedef u32		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid32_t	st_uid;
+	__compat_gid32_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	compat_time_t	st_atime;
+	u32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	u32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current->thread.regs;
+	unsigned long usp = regs->gpr[1];
+
+	/*
+	 * We cant access below the stack pointer in the 32bit ABI and
+	 * can access 288 bytes in the 64bit ABI
+	 */
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp -= 288;
+
+	return (void __user *) (usp - len);
+}
+
+/*
+ * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
+ * it we may as well define it.
+ */
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid_t uid;
+	__compat_gid_t gid;
+	__compat_uid_t cuid;
+	__compat_gid_t cgid;
+	compat_mode_t mode;
+	unsigned int seq;
+	unsigned int __pad2;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int __unused1;
+	compat_time_t sem_otime;
+	unsigned int __unused2;
+	compat_time_t sem_ctime;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int __unused1;
+	compat_time_t msg_stime;
+	unsigned int __unused2;
+	compat_time_t msg_rtime;
+	unsigned int __unused3;
+	compat_time_t msg_ctime;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t msg_lspid;
+	compat_pid_t msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int __unused1;
+	compat_time_t shm_atime;
+	unsigned int __unused2;
+	compat_time_t shm_dtime;
+	unsigned int __unused3;
+	compat_time_t shm_ctime;
+	unsigned int __unused4;
+	compat_size_t shm_segsz;
+	compat_pid_t shm_cpid;
+	compat_pid_t shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused5;
+	compat_ulong_t __unused6;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
new file mode 100644
index 000000000000..24d79e3abd8e
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm.h
@@ -0,0 +1,106 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/of.h>
+
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	((ushort)0x0008)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
+#define BD_SC_READY	(0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	(0x0400)	/* Transmit CRC */
+#define BD_SC_CM	(0x0200)	/* Continous mode */
+#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		(0x0100)	/* xmt preamble */
+#define BD_SC_BR	(0x0020)	/* Break received */
+#define BD_SC_FR	(0x0010)	/* Framing error */
+#define BD_SC_PR	(0x0008)	/* Parity error */
+#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	(0x0002)	/* Overrun */
+#define BD_SC_UN	(0x0002)	/* Underrun */
+#define BD_SC_CD	(0x0001)	/* */
+#define BD_SC_CL	(0x0001)	/* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY	(0x8000)
+#define BD_ENET_RX_WRAP		(0x2000)
+#define BD_ENET_RX_INTR		(0x1000)
+#define BD_ENET_RX_LAST		(0x0800)
+#define BD_ENET_RX_FIRST	(0x0400)
+#define BD_ENET_RX_MISS		(0x0100)
+#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
+#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
+#define BD_ENET_RX_LG		(0x0020)
+#define BD_ENET_RX_NO		(0x0010)
+#define BD_ENET_RX_SH		(0x0008)
+#define BD_ENET_RX_CR		(0x0004)
+#define BD_ENET_RX_OV		(0x0002)
+#define BD_ENET_RX_CL		(0x0001)
+#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY	(0x8000)
+#define BD_ENET_TX_PAD		(0x4000)
+#define BD_ENET_TX_WRAP		(0x2000)
+#define BD_ENET_TX_INTR		(0x1000)
+#define BD_ENET_TX_LAST		(0x0800)
+#define BD_ENET_TX_TC		(0x0400)
+#define BD_ENET_TX_DEF		(0x0200)
+#define BD_ENET_TX_HB		(0x0100)
+#define BD_ENET_TX_LC		(0x0080)
+#define BD_ENET_TX_RL		(0x0040)
+#define BD_ENET_TX_RCMASK	(0x003c)
+#define BD_ENET_TX_UN		(0x0002)
+#define BD_ENET_TX_CSL		(0x0001)
+#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST		(0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START		(0x0400)
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
+
+int cpm2_gpiochip_add32(struct device_node *np);
+
+#endif
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
new file mode 100644
index 000000000000..2ff798744c1d
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -0,0 +1,652 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM1__
+#define __CPM1__
+
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+#include <asm/cpm.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1		((ushort)0x0000)
+#define CPM_CR_CH_I2C		((ushort)0x0001)	/* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2		((ushort)0x0004)
+#define CPM_CR_CH_SPI		((ushort)0x0005)	/* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER		CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3		((ushort)0x0008)
+#define CPM_CR_CH_SMC1		((ushort)0x0009)	/* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4		((ushort)0x000c)
+#define CPM_CR_CH_SMC2		((ushort)0x000d)	/* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern void cpm_load_patch(cpm8xx_t *cp);
+
+extern void cpm_reset(void);
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1	((uint)0x0000)
+#define PROFF_IIC	((uint)0x0080)
+#define PROFF_SCC2	((uint)0x0100)
+#define PROFF_SPI	((uint)0x0180)
+#define PROFF_SCC3	((uint)0x0200)
+#define PROFF_SMC1	((uint)0x0280)
+#define PROFF_SCC4	((uint)0x0300)
+#define PROFF_SMC2	((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	char	res1[8];	/* Reserved */
+	ushort	smc_rpbase;	/* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC	((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	char	res1[8];	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+	char	res1[4];	/* Reserved */
+	ushort	iic_rpbase;	/* Relocation pointer */
+	char	res2[2];	/* Reserved */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;
+	ushort	spi_rpbase;	/* Relocation pointer */
+	ushort	spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
+#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
+#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME	0x20
+#define SPIE_TXE	0x10
+#define SPIE_BSY	0x04
+#define SPIE_TXB	0x02
+#define SPIE_RXB	0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME	0x8000			/* RISC Timer Enable */
+#define RCCR_TIMEP(t)	(((t) & 0x3F)<<8)	/* RISC Timer Period */
+#define RCCR_TIME_MASK	0x00FF			/* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR	((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+	unsigned short	tm_base;	/* RISC Timer Table Base Address */
+	unsigned short	tm_ptr;		/* RISC Timer Table Pointer (internal) */
+	unsigned short	r_tmr;		/* RISC Timer Mode Register */
+	unsigned short	r_tmv;		/* RISC Timer Valid Register */
+	unsigned long	tm_cmd;		/* RISC Timer Command Register */
+	unsigned long	tm_cnt;		/* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID	0x80000000	/* Valid - Enables the timer */
+#define TM_CMD_RESTART	0x40000000	/* Restart - for automatic restart */
+#define TM_CMD_PWM	0x20000000	/* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n)	(((n)&0xF)<<16)	/* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF)	/* Timer Period */
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR		32
+#define	CPMVEC_PIO_PC15		((ushort)0x1f)
+#define	CPMVEC_SCC1		((ushort)0x1e)
+#define	CPMVEC_SCC2		((ushort)0x1d)
+#define	CPMVEC_SCC3		((ushort)0x1c)
+#define	CPMVEC_SCC4		((ushort)0x1b)
+#define	CPMVEC_PIO_PC14		((ushort)0x1a)
+#define	CPMVEC_TIMER1		((ushort)0x19)
+#define	CPMVEC_PIO_PC13		((ushort)0x18)
+#define	CPMVEC_PIO_PC12		((ushort)0x17)
+#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
+#define CPMVEC_IDMA1		((ushort)0x15)
+#define CPMVEC_IDMA2		((ushort)0x14)
+#define CPMVEC_TIMER2		((ushort)0x12)
+#define CPMVEC_RISCTIMER	((ushort)0x11)
+#define CPMVEC_I2C		((ushort)0x10)
+#define	CPMVEC_PIO_PC11		((ushort)0x0f)
+#define	CPMVEC_PIO_PC10		((ushort)0x0e)
+#define CPMVEC_TIMER3		((ushort)0x0c)
+#define	CPMVEC_PIO_PC9		((ushort)0x0b)
+#define	CPMVEC_PIO_PC8		((ushort)0x0a)
+#define	CPMVEC_PIO_PC7		((ushort)0x09)
+#define CPMVEC_TIMER4		((ushort)0x07)
+#define	CPMVEC_PIO_PC6		((ushort)0x06)
+#define	CPMVEC_SPI		((ushort)0x05)
+#define	CPMVEC_SMC1		((ushort)0x04)
+#define	CPMVEC_SMC2		((ushort)0x03)
+#define	CPMVEC_PIO_PC5		((ushort)0x02)
+#define	CPMVEC_PIO_PC4		((ushort)0x01)
+#define	CPMVEC_ERROR		((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+
+#define IMAP_ADDR		(get_immrbase())
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+	CPM_PORTA,
+	CPM_PORTB,
+	CPM_PORTC,
+	CPM_PORTD,
+	CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
+#endif /* __CPM1__ */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
new file mode 100644
index 000000000000..2a6fa0183ac9
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -0,0 +1,1195 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map.  See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
+
+#ifdef CONFIG_PPC_85xx
+#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
+#endif
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((uint)0x80000000)
+#define CPM_CR_PAGE	((uint)0x7c000000)
+#define CPM_CR_SBLOCK	((uint)0x03e00000)
+#define CPM_CR_FLG	((uint)0x00010000)
+#define CPM_CR_MCN	((uint)0x00003fc0)
+#define CPM_CR_OPCODE	((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK	(0x04)
+#define CPM_CR_SCC2_SBLOCK	(0x05)
+#define CPM_CR_SCC3_SBLOCK	(0x06)
+#define CPM_CR_SCC4_SBLOCK	(0x07)
+#define CPM_CR_SMC1_SBLOCK	(0x08)
+#define CPM_CR_SMC2_SBLOCK	(0x09)
+#define CPM_CR_SPI_SBLOCK	(0x0a)
+#define CPM_CR_I2C_SBLOCK	(0x0b)
+#define CPM_CR_TIMER_SBLOCK	(0x0f)
+#define CPM_CR_RAND_SBLOCK	(0x0e)
+#define CPM_CR_FCC1_SBLOCK	(0x10)
+#define CPM_CR_FCC2_SBLOCK	(0x11)
+#define CPM_CR_FCC3_SBLOCK	(0x12)
+#define CPM_CR_IDMA1_SBLOCK	(0x14)
+#define CPM_CR_IDMA2_SBLOCK	(0x15)
+#define CPM_CR_IDMA3_SBLOCK	(0x16)
+#define CPM_CR_IDMA4_SBLOCK	(0x17)
+#define CPM_CR_MCC1_SBLOCK	(0x1c)
+
+#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
+
+#define CPM_CR_SCC1_PAGE	(0x00)
+#define CPM_CR_SCC2_PAGE	(0x01)
+#define CPM_CR_SCC3_PAGE	(0x02)
+#define CPM_CR_SCC4_PAGE	(0x03)
+#define CPM_CR_SMC1_PAGE	(0x07)
+#define CPM_CR_SMC2_PAGE	(0x08)
+#define CPM_CR_SPI_PAGE		(0x09)
+#define CPM_CR_I2C_PAGE		(0x0a)
+#define CPM_CR_TIMER_PAGE	(0x0a)
+#define CPM_CR_RAND_PAGE	(0x0a)
+#define CPM_CR_FCC1_PAGE	(0x04)
+#define CPM_CR_FCC2_PAGE	(0x05)
+#define CPM_CR_FCC3_PAGE	(0x06)
+#define CPM_CR_IDMA1_PAGE	(0x07)
+#define CPM_CR_IDMA2_PAGE	(0x08)
+#define CPM_CR_IDMA3_PAGE	(0x09)
+#define CPM_CR_IDMA4_PAGE	(0x0a)
+#define CPM_CR_MCC1_PAGE	(0x07)
+#define CPM_CR_MCC2_PAGE	(0x08)
+
+#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+
+/* CPM2-specific opcodes (see cpm.h for common opcodes)
+*/
+#define CPM_CR_START_IDMA	((ushort)0x0009)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* The number of pages of host memory we allocate for CPM.  This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES	2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+
+extern void cpm2_reset(void);
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1		((uint)0x8000)
+#define PROFF_SCC2		((uint)0x8100)
+#define PROFF_SCC3		((uint)0x8200)
+#define PROFF_SCC4		((uint)0x8300)
+#define PROFF_FCC1		((uint)0x8400)
+#define PROFF_FCC2		((uint)0x8500)
+#define PROFF_FCC3		((uint)0x8600)
+#define PROFF_MCC1		((uint)0x8700)
+#define PROFF_SMC1_BASE		((uint)0x87fc)
+#define PROFF_IDMA1_BASE	((uint)0x87fe)
+#define PROFF_MCC2		((uint)0x8800)
+#define PROFF_SMC2_BASE		((uint)0x88fc)
+#define PROFF_IDMA2_BASE	((uint)0x88fe)
+#define PROFF_SPI_BASE		((uint)0x89fc)
+#define PROFF_IDMA3_BASE	((uint)0x89fe)
+#define PROFF_TIMERS		((uint)0x8ae0)
+#define PROFF_REVNUM		((uint)0x8af0)
+#define PROFF_RAND		((uint)0x8af8)
+#define PROFF_I2C_BASE		((uint)0x8afc)
+#define PROFF_IDMA4_BASE	((uint)0x8afe)
+
+#define PROFF_SCC_SIZE		((uint)0x100)
+#define PROFF_FCC_SIZE		((uint)0x100)
+#define PROFF_SMC_SIZE		((uint)64)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1	(0)
+#define PROFF_SMC2	(64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	uint	smc_stmp;	/* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE	((unsigned char)0x10)
+#define SMCM_BSY	((unsigned char)0x04)
+#define SMCM_TX		((unsigned char)0x02)
+#define SMCM_RX		((unsigned char)0x01)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE	((unsigned char)0x10)
+#define SCCM_BSY	((unsigned char)0x04)
+#define SCCM_TX		((unsigned char)0x02)
+#define SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE	((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE	((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)
+#define FCC_GFMR_TCI		((uint)0x20000000)
+#define FCC_GFMR_TRX		((uint)0x10000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_CDP		((uint)0x04000000)
+#define FCC_GFMR_CTSP		((uint)0x02000000)
+#define FCC_GFMR_CDS		((uint)0x01000000)
+#define FCC_GFMR_CTSS		((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)
+#define FCC_GFMR_SYNL_8		((uint)0x00008000)
+#define FCC_GFMR_SYNL_16	((uint)0x0000c000)
+#define FCC_GFMR_RTSM		((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)
+#define FCC_GFMR_REVD		((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)
+#define FCC_GFMR_TCRC_16	((uint)0x00000000)
+#define FCC_GFMR_TCRC_32	((uint)0x00000080)
+#define FCC_GFMR_ENR		((uint)0x00000020)
+#define FCC_GFMR_ENT		((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+	ushort	fcc_riptr;	/* Rx Internal temp pointer */
+	ushort	fcc_tiptr;	/* Tx Internal temp pointer */
+	ushort	fcc_res1;
+	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */
+	uint	fcc_rstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_rbase;	/* Receive BD base */
+	ushort	fcc_rbdstat;	/* RxBD status */
+	ushort	fcc_rbdlen;	/* RxBD down counter */
+	uint	fcc_rdptr;	/* RxBD internal data pointer */
+	uint	fcc_tstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_tbase;	/* Transmit BD base */
+	ushort	fcc_tbdstat;	/* TxBD status */
+	ushort	fcc_tbdlen;	/* TxBD down counter */
+	uint	fcc_tdptr;	/* TxBD internal data pointer */
+	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */
+	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */
+	uint	fcc_rcrc;	/* Rx temp CRC */
+	uint	fcc_res2;
+	uint	fcc_tcrc;	/* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+	fccp_t	fen_genfcc;
+	uint	fen_statbuf;	/* Internal status buffer */
+	uint	fen_camptr;	/* CAM address */
+	uint	fen_cmask;	/* Constant mask for CRC */
+	uint	fen_cpres;	/* Preset CRC */
+	uint	fen_crcec;	/* CRC Error counter */
+	uint	fen_alec;	/* alignment error counter */
+	uint	fen_disfc;	/* discard frame counter */
+	ushort	fen_retlim;	/* Retry limit */
+	ushort	fen_retcnt;	/* Retry counter */
+	ushort	fen_pper;	/* Persistence */
+	ushort	fen_boffcnt;	/* backoff counter */
+	uint	fen_gaddrh;	/* Group address filter, high 32-bits */
+	uint	fen_gaddrl;	/* Group address filter, low 32-bits */
+	ushort	fen_tfcstat;	/* out of sequence TxBD */
+	ushort	fen_tfclen;
+	uint	fen_tfcptr;
+	ushort	fen_mflr;	/* Maximum frame length (1518) */
+	ushort	fen_paddrh;	/* MAC address */
+	ushort	fen_paddrm;
+	ushort	fen_paddrl;
+	ushort	fen_ibdcount;	/* Internal BD counter */
+	ushort	fen_ibdstart;	/* Internal BD start pointer */
+	ushort	fen_ibdend;	/* Internal BD end pointer */
+	ushort	fen_txlen;	/* Internal Tx frame length counter */
+	uint	fen_ibdbase[8]; /* Internal use */
+	uint	fen_iaddrh;	/* Individual address filter */
+	uint	fen_iaddrl;
+	ushort	fen_minflr;	/* Minimum frame length (64) */
+	ushort	fen_taddrh;	/* Filter transfer MAC address */
+	ushort	fen_taddrm;
+	ushort	fen_taddrl;
+	ushort	fen_padptr;	/* Pointer to pad byte buffer */
+	ushort	fen_cftype;	/* control frame type */
+	ushort	fen_cfrange;	/* control frame range */
+	ushort	fen_maxb;	/* maximum BD count */
+	ushort	fen_maxd1;	/* Max DMA1 length (1520) */
+	ushort	fen_maxd2;	/* Max DMA2 length (1520) */
+	ushort	fen_maxd;	/* internal max DMA count */
+	ushort	fen_dmacnt;	/* internal DMA counter */
+	uint	fen_octc;	/* Total octect counter */
+	uint	fen_colc;	/* Total collision counter */
+	uint	fen_broc;	/* Total broadcast packet counter */
+	uint	fen_mulc;	/* Total multicast packet count */
+	uint	fen_uspc;	/* Total packets < 64 bytes */
+	uint	fen_frgc;	/* Total packets < 64 bytes with errors */
+	uint	fen_ospc;	/* Total packets > 1518 */
+	uint	fen_jbrc;	/* Total packets > 1518 with errors */
+	uint	fen_p64c;	/* Total packets == 64 bytes */
+	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */
+	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */
+	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */
+	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */
+	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */
+	uint	fen_cambuf;	/* Internal CAM buffer poiner */
+	ushort	fen_rfthr;	/* Received frames threshold */
+	ushort	fen_rfcnt;	/* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */
+#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */
+#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */
+#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */
+#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */
+#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */
+#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */
+#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */
+#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */
+#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */
+#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */
+#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */
+#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */
+#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;	/* Tx temp. */
+	uint	spi_res1[4];	/* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)	((x) &0xF)
+
+#define SPI_EB		((u_char)0x10)		/* big endian byte order */
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+	ushort ibase;		/* IDMA buffer descriptor table base address */
+	ushort dcm;		/* DMA channel mode */
+	ushort ibdptr;		/* IDMA current buffer descriptor pointer */
+	ushort dpr_buf;		/* IDMA transfer buffer base address */
+	ushort buf_inv;		/* internal buffer inventory */
+	ushort ss_max;		/* steady-state maximum transfer size */
+	ushort dpr_in_ptr;	/* write pointer inside the internal buffer */
+	ushort sts;		/* source transfer size */
+	ushort dpr_out_ptr;	/* read pointer inside the internal buffer */
+	ushort seob;		/* source end of burst */
+	ushort deob;		/* destination end of burst */
+	ushort dts;		/* destination transfer size */
+	ushort ret_add;		/* return address when working in ERM=1 mode */
+	ushort res0;		/* reserved */
+	uint   bd_cnt;		/* internal byte count */
+	uint   s_ptr;		/* source internal data pointer */
+	uint   d_ptr;		/* destination internal data pointer */
+	uint   istate;		/* internal state */
+	u_char res1[20];	/* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB		((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP		((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2		((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK	((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64	((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128	((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256	((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512	((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024	((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048	((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC		((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC		((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM		((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT		((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK	((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM	((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM	((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER	((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+	uint flags;
+	uint len;	/* data length */
+	uint src;	/* source data buffer pointer */
+	uint dst;	/* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V	((uint)0x80000000)	/* valid */
+#define IDMA_BD_W	((uint)0x20000000)	/* wrap */
+#define IDMA_BD_I	((uint)0x10000000)	/* interrupt */
+#define IDMA_BD_L	((uint)0x08000000)	/* last */
+#define IDMA_BD_CM	((uint)0x02000000)	/* continuous mode */
+#define IDMA_BD_SDN	((uint)0x00400000)	/* source done */
+#define IDMA_BD_DDN	((uint)0x00200000)	/* destination done */
+#define IDMA_BD_DGBL	((uint)0x00100000)	/* destination global */
+#define IDMA_BD_DBO_LE	((uint)0x00040000)	/* little-end dest byte order */
+#define IDMA_BD_DBO_BE	((uint)0x00080000)	/* big-end dest byte order */
+#define IDMA_BD_DDTB	((uint)0x00010000)	/* destination data bus */
+#define IDMA_BD_SGBL	((uint)0x00002000)	/* source global */
+#define IDMA_BD_SBO_LE	((uint)0x00000800)	/* little-end src byte order */
+#define IDMA_BD_SBO_BE	((uint)0x00001000)	/* big-end src byte order */
+#define IDMA_BD_SDTB	((uint)0x00000200)	/* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+	u_char idsr;			/* IDMAn event status register */
+	u_char res0[3];
+	u_char idmr;			/* IDMAn event mask register */
+	u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC	((unsigned char)0x08)	/* stop completed */
+#define IDMA_EVENT_OB	((unsigned char)0x04)	/* out of buffers */
+#define IDMA_EVENT_EDN	((unsigned char)0x02)	/* external DONE asserted */
+#define IDMA_EVENT_BC	((unsigned char)0x01)	/* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME	((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK	((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M	((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M	((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M	((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M	((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK	((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED	((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW	((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK	((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED	((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW	((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK	((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED	((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW	((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK	((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED	((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW	((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE	((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD	((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK	((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB	((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB	((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB	((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB	((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB	((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB	((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB	((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0	((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1	((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2	((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3	((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01	((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23	((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
+#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
+#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
+#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
+#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
+#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
+#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
+#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
+#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
+#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
+#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
+#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register				 4-31
+ */
+#define SIUMCR_BBD	0x80000000	/* Bus Busy Disable		*/
+#define SIUMCR_ESE	0x40000000	/* External Snoop Enable	*/
+#define SIUMCR_PBSE	0x20000000	/* Parity Byte Select Enable	*/
+#define SIUMCR_CDIS	0x10000000	/* Core Disable			*/
+#define SIUMCR_DPPC00	0x00000000	/* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01	0x04000000	/* - " -			*/
+#define SIUMCR_DPPC10	0x08000000	/* - " -			*/
+#define SIUMCR_DPPC11	0x0c000000	/* - " -			*/
+#define SIUMCR_L2CPC00	0x00000000	/* L2 Cache Pins Configuration	*/
+#define SIUMCR_L2CPC01	0x01000000	/* - " -			*/
+#define SIUMCR_L2CPC10	0x02000000	/* - " -			*/
+#define SIUMCR_L2CPC11	0x03000000	/* - " -			*/
+#define SIUMCR_LBPC00	0x00000000	/* Local Bus Pins Configuration	*/
+#define SIUMCR_LBPC01	0x00400000	/* - " -			*/
+#define SIUMCR_LBPC10	0x00800000	/* - " -			*/
+#define SIUMCR_LBPC11	0x00c00000	/* - " -			*/
+#define SIUMCR_APPC00	0x00000000	/* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01	0x00100000	/* - " -			*/
+#define SIUMCR_APPC10	0x00200000	/* - " -			*/
+#define SIUMCR_APPC11	0x00300000	/* - " -			*/
+#define SIUMCR_CS10PC00	0x00000000	/* CS10 Pin Configuration	*/
+#define SIUMCR_CS10PC01	0x00040000	/* - " -			*/
+#define SIUMCR_CS10PC10	0x00080000	/* - " -			*/
+#define SIUMCR_CS10PC11	0x000c0000	/* - " -			*/
+#define SIUMCR_BCTLC00	0x00000000	/* Buffer Control Configuration	*/
+#define SIUMCR_BCTLC01	0x00010000	/* - " -			*/
+#define SIUMCR_BCTLC10	0x00020000	/* - " -			*/
+#define SIUMCR_BCTLC11	0x00030000	/* - " -			*/
+#define SIUMCR_MMR00	0x00000000	/* Mask Masters Requests	*/
+#define SIUMCR_MMR01	0x00004000	/* - " -			*/
+#define SIUMCR_MMR10	0x00008000	/* - " -			*/
+#define SIUMCR_MMR11	0x0000c000	/* - " -			*/
+#define SIUMCR_LPBSE	0x00002000	/* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register					 9-8
+*/
+#define SCCR_PCI_MODE	0x00000100	/* PCI Mode	*/
+#define SCCR_PCI_MODCK	0x00000080	/* Value of PCI_MODCK pin	*/
+#define SCCR_PCIDF_MSK	0x00000078	/* PCI division factor	*/
+#define SCCR_PCIDF_SHIFT 3
+
+#ifndef CPM_IMMR_OFFSET
+#define CPM_IMMR_OFFSET	0x101a8
+#endif
+
+#define FCC_PSMR_RMII	((uint)0x00020000)	/* Use RMII interface */
+
+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK	((uint)0xff000000)
+
+#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK	((uint)0x00ff0000)
+
+#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK	((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL		0x00000001U
+#define PA1_CRS		0x00000002U
+#define PA1_TXER	0x00000004U
+#define PA1_TXEN	0x00000008U
+#define PA1_RXDV	0x00000010U
+#define PA1_RXER	0x00000020U
+#define PA1_TXDAT	0x00003c00U
+#define PA1_RXDAT	0x0003c000U
+#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+		PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER	0x00000001U
+#define PB2_RXDV	0x00000002U
+#define PB2_TXEN	0x00000004U
+#define PB2_RXER	0x00000008U
+#define PB2_COL		0x00000010U
+#define PB2_CRS		0x00000020U
+#define PB2_TXDAT	0x000003c0U
+#define PB2_RXDAT	0x00003c00U
+#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+		PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1	(PB2_TXEN)
+#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV	0x00004000U
+#define PB3_RXER	0x00008000U
+#define PB3_TXER	0x00010000U
+#define PB3_TXEN	0x00020000U
+#define PB3_COL		0x00040000U
+#define PB3_CRS		0x00080000U
+#define PB3_TXDAT	0x0f000000U
+#define PC3_TXDAT	0x00000010U
+#define PB3_RXDAT	0x00f00000U
+#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1	0
+#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1	(PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_FCC1,
+	CPM_CLK_FCC2,
+	CPM_CLK_FCC3,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_CLK_NONE = 0,
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_BRG5,	/* Baud Rate Generator  5 */
+	CPM_BRG6,	/* Baud Rate Generator  6 */
+	CPM_BRG7,	/* Baud Rate Generator  7 */
+	CPM_BRG8,	/* Baud Rate Generator  8 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+	CPM_CLK9,	/* Clock  9 */
+	CPM_CLK10,	/* Clock 10 */
+	CPM_CLK11,	/* Clock 11 */
+	CPM_CLK12,	/* Clock 12 */
+	CPM_CLK13,	/* Clock 13 */
+	CPM_CLK14,	/* Clock 14 */
+	CPM_CLK15,	/* Clock 15 */
+	CPM_CLK16,	/* Clock 16 */
+	CPM_CLK17,	/* Clock 17 */
+	CPM_CLK18,	/* Clock 18 */
+	CPM_CLK19,	/* Clock 19 */
+	CPM_CLK20,	/* Clock 20 */
+	CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
+extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
new file mode 100644
index 000000000000..ef8a248dfd55
--- /dev/null
+++ b/arch/powerpc/include/asm/cputable.h
@@ -0,0 +1,514 @@
+#ifndef __ASM_POWERPC_CPUTABLE_H
+#define __ASM_POWERPC_CPUTABLE_H
+
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+#define PPC_FEATURE_HAS_SPE		0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
+#define PPC_FEATURE_NO_TB		0x00100000
+#define PPC_FEATURE_POWER4		0x00080000
+#define PPC_FEATURE_POWER5		0x00040000
+#define PPC_FEATURE_POWER5_PLUS		0x00020000
+#define PPC_FEATURE_CELL		0x00010000
+#define PPC_FEATURE_BOOKE		0x00008000
+#define PPC_FEATURE_SMT			0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
+#define PPC_FEATURE_ARCH_2_05		0x00001000
+#define PPC_FEATURE_PA6T		0x00000800
+#define PPC_FEATURE_HAS_DFP		0x00000400
+#define PPC_FEATURE_POWER6_EXT		0x00000200
+#define PPC_FEATURE_ARCH_2_06		0x00000100
+#define PPC_FEATURE_HAS_VSX		0x00000080
+
+#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
+					0x00000040
+
+#define PPC_FEATURE_TRUE_LE		0x00000002
+#define PPC_FEATURE_PPC_LE		0x00000001
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mechanism.
+ */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
+typedef	void (*cpu_restore_t)(void);
+
+enum powerpc_oprofile_type {
+	PPC_OPROFILE_INVALID = 0,
+	PPC_OPROFILE_RS64 = 1,
+	PPC_OPROFILE_POWER4 = 2,
+	PPC_OPROFILE_G4 = 3,
+	PPC_OPROFILE_FSL_EMB = 4,
+	PPC_OPROFILE_CELL = 5,
+	PPC_OPROFILE_PA6T = 6,
+};
+
+enum powerpc_pmc_type {
+	PPC_PMC_DEFAULT = 0,
+	PPC_PMC_IBM = 1,
+	PPC_PMC_PA6T = 2,
+};
+
+struct pt_regs;
+
+extern int machine_check_generic(struct pt_regs *regs);
+extern int machine_check_4xx(struct pt_regs *regs);
+extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500(struct pt_regs *regs);
+extern int machine_check_e200(struct pt_regs *regs);
+
+/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
+struct cpu_spec {
+	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
+	unsigned int	pvr_mask;
+	unsigned int	pvr_value;
+
+	char		*cpu_name;
+	unsigned long	cpu_features;		/* Kernel features */
+	unsigned int	cpu_user_features;	/* Userland features */
+
+	/* cache line sizes */
+	unsigned int	icache_bsize;
+	unsigned int	dcache_bsize;
+
+	/* number of performance monitor counters */
+	unsigned int	num_pmcs;
+	enum powerpc_pmc_type pmc_type;
+
+	/* this is called to initialize various CPU bits like L1 cache,
+	 * BHT, SPD, etc... from head.S before branching to identify_machine
+	 */
+	cpu_setup_t	cpu_setup;
+	/* Used to restore cpu setup on secondary processors and at resume */
+	cpu_restore_t	cpu_restore;
+
+	/* Used by oprofile userspace to select the right counters */
+	char		*oprofile_cpu_type;
+
+	/* Processor specific oprofile operations */
+	enum powerpc_oprofile_type oprofile_type;
+
+	/* Bit locations inside the mmcra change */
+	unsigned long	oprofile_mmcra_sihv;
+	unsigned long	oprofile_mmcra_sipr;
+
+	/* Bits to clear during an oprofile exception */
+	unsigned long	oprofile_mmcra_clear;
+
+	/* Name of processor class, for the ELF AT_PLATFORM entry */
+	char		*platform;
+
+	/* Processor specific machine check handling. Return negative
+	 * if the error is fatal, 1 if it was fully recovered and 0 to
+	 * pass up (not CPU originated) */
+	int		(*machine_check)(struct pt_regs *regs);
+};
+
+extern struct cpu_spec		*cur_cpu_spec;
+
+extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
+
+extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
+extern void do_feature_fixups(unsigned long value, void *fixup_start,
+			      void *fixup_end);
+
+extern const char *powerpc_base_platform;
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+
+/* Retain the 32b definitions all use bottom half of word */
+#define CPU_FTR_COHERENT_ICACHE		ASM_CONST(0x0000000000000001)
+#define CPU_FTR_L2CR			ASM_CONST(0x0000000000000002)
+#define CPU_FTR_SPEC7450		ASM_CONST(0x0000000000000004)
+#define CPU_FTR_ALTIVEC			ASM_CONST(0x0000000000000008)
+#define CPU_FTR_TAU			ASM_CONST(0x0000000000000010)
+#define CPU_FTR_CAN_DOZE		ASM_CONST(0x0000000000000020)
+#define CPU_FTR_USE_TB			ASM_CONST(0x0000000000000040)
+#define CPU_FTR_L2CSR			ASM_CONST(0x0000000000000080)
+#define CPU_FTR_601			ASM_CONST(0x0000000000000100)
+#define CPU_FTR_HPTE_TABLE		ASM_CONST(0x0000000000000200)
+#define CPU_FTR_CAN_NAP			ASM_CONST(0x0000000000000400)
+#define CPU_FTR_L3CR			ASM_CONST(0x0000000000000800)
+#define CPU_FTR_L3_DISABLE_NAP		ASM_CONST(0x0000000000001000)
+#define CPU_FTR_NAP_DISABLE_L2_PR	ASM_CONST(0x0000000000002000)
+#define CPU_FTR_DUAL_PLL_750FX		ASM_CONST(0x0000000000004000)
+#define CPU_FTR_NO_DPM			ASM_CONST(0x0000000000008000)
+#define CPU_FTR_HAS_HIGH_BATS		ASM_CONST(0x0000000000010000)
+#define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
+#define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_BIG_PHYS		ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
+#define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
+#define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
+#define CPU_FTR_UNIFIED_ID_CACHE	ASM_CONST(0x0000000001000000)
+#define CPU_FTR_SPE			ASM_CONST(0x0000000002000000)
+#define CPU_FTR_NEED_PAIRED_STWCX	ASM_CONST(0x0000000004000000)
+#define CPU_FTR_LWSYNC			ASM_CONST(0x0000000008000000)
+
+/*
+ * Add the 64-bit processor unique features in the top half of the word;
+ * on 32-bit, make the names available but defined to be 0.
+ */
+#ifdef __powerpc64__
+#define LONG_ASM_CONST(x)		ASM_CONST(x)
+#else
+#define LONG_ASM_CONST(x)		0
+#endif
+
+#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
+#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
+#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+#define CPU_FTR_NOEXECUTE		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
+#define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
+#define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
+#define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
+#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
+#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
+#define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
+#define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
+#define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
+#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
+#define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
+#define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
+
+#ifndef __ASSEMBLY__
+
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
+				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
+				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+
+/* We only set the altivec features if the kernel was compiled with altivec
+ * support
+ */
+#ifdef CONFIG_ALTIVEC
+#define CPU_FTR_ALTIVEC_COMP	CPU_FTR_ALTIVEC
+#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
+#else
+#define CPU_FTR_ALTIVEC_COMP	0
+#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
+#endif
+
+/* We only set the VSX features if the kernel was compiled with VSX
+ * support
+ */
+#ifdef CONFIG_VSX
+#define CPU_FTR_VSX_COMP	CPU_FTR_VSX
+#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
+#else
+#define CPU_FTR_VSX_COMP	0
+#define PPC_FEATURE_HAS_VSX_COMP    0
+#endif
+
+/* We only set the spe features if the kernel was compiled with spe
+ * support
+ */
+#ifdef CONFIG_SPE
+#define CPU_FTR_SPE_COMP	CPU_FTR_SPE
+#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
+#else
+#define CPU_FTR_SPE_COMP	0
+#define PPC_FEATURE_HAS_SPE_COMP    0
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
+#endif
+
+/* We need to mark all pages as being coherent if we're SMP or we have a
+ * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+ * require it for PCI "streaming/prefetch" to work properly.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+#else
+#define CPU_FTR_COMMON                  0
+#endif
+
+/* The powersave features NAP & DOZE seems to confuse BDI when
+   debugging. So if a BDI is used, disable theses
+ */
+#ifndef CONFIG_BDI_SWITCH
+#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
+#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
+#else
+#define CPU_FTR_MAYBE_CAN_DOZE	0
+#define CPU_FTR_MAYBE_CAN_NAP	0
+#endif
+
+#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
+		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
+		     !defined(CONFIG_BOOKE))
+
+#define CPU_FTRS_PPC601	(CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
+	CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_603	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_604	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750CL	(CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750FX1	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX2	(CPU_FTRS_750 | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
+		CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750GX	(CPU_FTRS_750FX)
+#define CPU_FTRS_7400_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7400	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7450_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_21	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_23	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_1	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447_10	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
+	    CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447A	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7448	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
+#define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_E300	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
+#define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_8XX	(CPU_FTR_USE_TB)
+#define CPU_FTRS_40X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_E500	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
+	    CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500MC	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
+	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
+#define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
+
+/* 64-bit CPUs */
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
+	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
+#define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA)
+#define CPU_FTRS_PPC970	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+#define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR)
+#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR)
+#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO)
+#define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
+#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+#define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
+
+#ifdef __powerpc64__
+#define CPU_FTRS_POSSIBLE	\
+	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
+	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
+	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
+	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+#else
+enum {
+	CPU_FTRS_POSSIBLE =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
+	    CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
+	    CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
+	    CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
+	    CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
+	    CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
+	    CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
+	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+	    CPU_FTRS_CLASSIC32 |
+#else
+	    CPU_FTRS_GENERIC_32 |
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX |
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X |
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X |
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 |
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
+#endif
+	    0,
+};
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+#define CPU_FTRS_ALWAYS		\
+	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
+	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
+	    CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
+#else
+enum {
+	CPU_FTRS_ALWAYS =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
+	    CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
+	    CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
+	    CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
+	    CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
+	    CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
+	    CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
+	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+	    CPU_FTRS_CLASSIC32 &
+#else
+	    CPU_FTRS_GENERIC_32 &
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX &
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X &
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X &
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 &
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
+#endif
+	    CPU_FTRS_POSSIBLE,
+};
+#endif /* __powerpc64__ */
+
+static inline int cpu_has_feature(unsigned long feature)
+{
+	return (CPU_FTRS_ALWAYS & feature) ||
+	       (CPU_FTRS_POSSIBLE
+		& cur_cpu_spec->cpu_features
+		& feature);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
new file mode 100644
index 000000000000..fb11b0c459b8
--- /dev/null
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_POWERPC_CPUTHREADS_H
+#define _ASM_POWERPC_CPUTHREADS_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Mapping of threads to cores
+ */
+
+#ifdef CONFIG_SMP
+extern int threads_per_core;
+extern int threads_shift;
+extern cpumask_t threads_core_mask;
+#else
+#define threads_per_core	1
+#define threads_shift		0
+#define threads_core_mask	(CPU_MASK_CPU0)
+#endif
+
+/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
+ *                            hit by the argument
+ *
+ * @threads:	a cpumask of threads
+ *
+ * This function returns a cpumask which will have one "cpu" (or thread)
+ * bit set for each core that has at least one thread set in the argument.
+ *
+ * This can typically be used for things like IPI for tlb invalidations
+ * since those need to be done only once per core/TLB
+ */
+static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+{
+	cpumask_t	tmp, res;
+	int		i;
+
+	res = CPU_MASK_NONE;
+	for (i = 0; i < NR_CPUS; i += threads_per_core) {
+		cpus_shift_left(tmp, threads_core_mask, i);
+		if (cpus_intersects(threads, tmp))
+			cpu_set(i, res);
+	}
+	return res;
+}
+
+static inline int cpu_nr_cores(void)
+{
+	return NR_CPUS >> threads_shift;
+}
+
+static inline cpumask_t cpu_online_cores_map(void)
+{
+	return cpu_thread_mask_to_cores(cpu_online_map);
+}
+
+static inline int cpu_thread_to_core(int cpu)
+{
+	return cpu >> threads_shift;
+}
+
+static inline int cpu_thread_in_core(int cpu)
+{
+	return cpu & (threads_per_core - 1);
+}
+
+static inline int cpu_first_thread_in_core(int cpu)
+{
+	return cpu & ~(threads_per_core - 1);
+}
+
+#endif /* _ASM_POWERPC_CPUTHREADS_H */
+
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
new file mode 100644
index 000000000000..f42e623030ee
--- /dev/null
+++ b/arch/powerpc/include/asm/cputime.h
@@ -0,0 +1,235 @@
+/*
+ * Definitions for measuring cputime on powerpc machines.
+ *
+ * Copyright (C) 2006 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
+ * the same units as the timebase.  Otherwise we measure cpu time
+ * in jiffies using the generic definitions.
+ */
+
+#ifndef __POWERPC_CPUTIME_H
+#define __POWERPC_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/div64.h>
+#include <asm/time.h>
+#include <asm/param.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+#ifdef __KERNEL__
+
+/*
+ * Convert cputime <-> jiffies
+ */
+extern u64 __cputime_jiffies_factor;
+DECLARE_PER_CPU(unsigned long, cputime_last_delta);
+DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
+
+static inline unsigned long cputime_to_jiffies(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/* Estimate the scaled cputime by scaling the real cputime based on
+ * the last scaled to real ratio */
+static inline cputime_t cputime_to_scaled(const cputime_t ct)
+{
+	if (cpu_has_feature(CPU_FTR_SPURR) &&
+	    per_cpu(cputime_last_delta, smp_processor_id()))
+		return ct *
+			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
+			per_cpu(cputime_last_delta, smp_processor_id());
+	return ct;
+}
+
+static inline cputime_t jiffies_to_cputime(const unsigned long jif)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
+{
+	cputime_t ct;
+	u64 sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline u64 cputime64_to_jiffies64(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+extern u64 __cputime_msec_factor;
+
+static inline unsigned long cputime_to_msecs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_msec_factor);
+}
+
+static inline cputime_t msecs_to_cputime(const unsigned long ms)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = ms % 1000;
+	sec = ms / 1000;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, 1000);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+/*
+ * Convert cputime <-> seconds
+ */
+extern u64 __cputime_sec_factor;
+
+static inline unsigned long cputime_to_secs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_sec_factor);
+}
+
+static inline cputime_t secs_to_cputime(const unsigned long sec)
+{
+	return (cputime_t) sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timespec
+ */
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_nsec = x;
+}
+
+static inline cputime_t timespec_to_cputime(const struct timespec *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_nsec * tb_ticks_per_sec;
+	do_div(ct, 1000000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timeval
+ */
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_usec = x;
+}
+
+static inline cputime_t timeval_to_cputime(const struct timeval *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_usec * tb_ticks_per_sec;
+	do_div(ct, 1000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> clock_t (units of 1/USER_HZ seconds)
+ */
+extern u64 __cputime_clockt_factor;
+
+static inline unsigned long cputime_to_clock_t(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_clockt_factor);
+}
+
+static inline cputime_t clock_t_to_cputime(const unsigned long clk)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = clk % USER_HZ;
+	sec = clk / USER_HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, USER_HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+#define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
+
+#endif /* __KERNEL__ */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h
new file mode 100644
index 000000000000..e2c7f06931e7
--- /dev/null
+++ b/arch/powerpc/include/asm/current.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_CURRENT_H
+#define _ASM_POWERPC_CURRENT_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct task_struct;
+
+#ifdef __powerpc64__
+#include <linux/stddef.h>
+#include <asm/paca.h>
+
+static inline struct task_struct *get_current(void)
+{
+	struct task_struct *task;
+
+	__asm__ __volatile__("ld %0,%1(13)"
+	: "=r" (task)
+	: "i" (offsetof(struct paca_struct, __current)));
+
+	return task;
+}
+#define current	get_current()
+
+#else
+
+/*
+ * We keep `current' in r2 for speed.
+ */
+register struct task_struct *current asm ("r2");
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h
new file mode 100644
index 000000000000..e23f07e73cb3
--- /dev/null
+++ b/arch/powerpc/include/asm/dbdma.h
@@ -0,0 +1,108 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers.  All little-endian.
+ */
+struct dbdma_regs {
+    unsigned int control;	/* lets you change bits in status */
+    unsigned int status;	/* DMA and device status bits (see below) */
+    unsigned int cmdptr_hi;	/* upper 32 bits of command address */
+    unsigned int cmdptr;	/* (lower 32 bits of) command address (phys) */
+    unsigned int intr_sel;	/* select interrupt condition bit */
+    unsigned int br_sel;	/* select branch condition bit */
+    unsigned int wait_sel;	/* select wait condition bit */
+    unsigned int xfer_mode;
+    unsigned int data2ptr_hi;
+    unsigned int data2ptr;
+    unsigned int res1;
+    unsigned int address_hi;
+    unsigned int br_addr_hi;
+    unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN	0x8000
+#define PAUSE	0x4000
+#define FLUSH	0x2000
+#define WAKE	0x1000
+#define DEAD	0x0800
+#define ACTIVE	0x0400
+#define BT	0x0100
+#define DEVSTAT	0x00ff
+
+/*
+ * DBDMA command structure.  These fields are all little-endian!
+ */
+struct dbdma_cmd {
+    unsigned short req_count;	/* requested byte transfer count */
+    unsigned short command;	/* command word (has bit-fields) */
+    unsigned int   phy_addr;	/* physical data address */
+    unsigned int   cmd_dep;	/* command-dependent field */
+    unsigned short res_count;	/* residual count after completion */
+    unsigned short xfer_status;	/* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE	0	/* transfer memory data to stream */
+#define OUTPUT_LAST	0x1000	/* ditto followed by end marker */
+#define INPUT_MORE	0x2000	/* transfer stream data to memory */
+#define INPUT_LAST	0x3000	/* ditto, expect end marker */
+#define STORE_WORD	0x4000	/* write word (4 bytes) to device reg */
+#define LOAD_WORD	0x5000	/* read word (4 bytes) from device reg */
+#define DBDMA_NOP	0x6000	/* do nothing */
+#define DBDMA_STOP	0x7000	/* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0	0	/* usual data stream */
+#define KEY_STREAM1	0x100	/* control/status stream */
+#define KEY_STREAM2	0x200	/* device-dependent stream */
+#define KEY_STREAM3	0x300	/* device-dependent stream */
+#define KEY_REGS	0x500	/* device register space */
+#define KEY_SYSTEM	0x600	/* system memory-mapped space */
+#define KEY_DEVICE	0x700	/* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER	0	/* don't interrupt */
+#define INTR_IFSET	0x10	/* intr if condition bit is 1 */
+#define INTR_IFCLR	0x20	/* intr if condition bit is 0 */
+#define INTR_ALWAYS	0x30	/* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER	0	/* don't branch */
+#define BR_IFSET	0x4	/* branch if condition bit is 1 */
+#define BR_IFCLR	0x8	/* branch if condition bit is 0 */
+#define BR_ALWAYS	0xc	/* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER	0	/* don't wait */
+#define WAIT_IFSET	1	/* wait if condition bit is 1 */
+#define WAIT_IFCLR	2	/* wait if condition bit is 0 */
+#define WAIT_ALWAYS	3	/* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x)	(((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
+			 & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do {				\
+	out_le32(&((regs)->control), (RUN|FLUSH)<<16);		\
+	while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))	\
+		; \
+} while(0)
+
+#define DBDMA_DO_RESET(regs) do {				\
+	out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\
+	while(in_le32(&((regs)->status)) & (RUN)) \
+		; \
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h
new file mode 100644
index 000000000000..35b71599ec46
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_GENERIC_H
+#define _ASM_POWERPC_DCR_GENERIC_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
+
+typedef struct {
+	enum host_type_t type;
+	union {
+		dcr_host_mmio_t mmio;
+		dcr_host_native_t native;
+	} host;
+} dcr_host_t;
+
+extern bool dcr_map_ok_generic(dcr_host_t host);
+
+extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
+			  unsigned int dcr_c);
+extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
+
+extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
+
+extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_GENERIC_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h
new file mode 100644
index 000000000000..acd491dbd45a
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-mmio.h
@@ -0,0 +1,61 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_MMIO_H
+#define _ASM_POWERPC_DCR_MMIO_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+typedef struct {
+	void __iomem *token;
+	unsigned int stride;
+	unsigned int base;
+} dcr_host_mmio_t;
+
+static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
+{
+	return host.token != NULL;
+}
+
+extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int dcr_c);
+extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
+
+static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
+{
+	return in_be32(host.token + ((host.base + dcr_n) * host.stride));
+}
+
+static inline void dcr_write_mmio(dcr_host_mmio_t host,
+				  unsigned int dcr_n,
+				  u32 value)
+{
+	out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
+}
+
+extern u64 of_translate_dcr_address(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int *stride);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_MMIO_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
new file mode 100644
index 000000000000..72d2b72c7390
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-native.h
@@ -0,0 +1,116 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_NATIVE_H
+#define _ASM_POWERPC_DCR_NATIVE_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+
+typedef struct {
+	unsigned int base;
+} dcr_host_native_t;
+
+static inline bool dcr_map_ok_native(dcr_host_native_t host)
+{
+	return 1;
+}
+
+#define dcr_map_native(dev, dcr_n, dcr_c) \
+	((dcr_host_native_t){ .base = (dcr_n) })
+#define dcr_unmap_native(host, dcr_c)		do {} while (0)
+#define dcr_read_native(host, dcr_n)		mfdcr(dcr_n + host.base)
+#define dcr_write_native(host, dcr_n, value)	mtdcr(dcr_n + host.base, value)
+
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
+	({unsigned int rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
+	else							\
+		rval = __mfdcr(rn);				\
+	rval;})
+
+#define mtdcr(rn, v)						\
+do {								\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+extern spinlock_t dcr_ind_lock;
+
+static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = __mfdcr(base_data);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+	return val;
+}
+
+static inline void __mtdcri(int base_addr, int base_data, int reg,
+			    unsigned val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+				 unsigned clr, unsigned set)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = (__mfdcr(base_data) & ~clr) | set;
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+#define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg)
+
+#define mtdcri(base, reg, data)	__mtdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg, data)
+
+#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
+							      DCRN_ ## base ## _CONFIG_DATA,	\
+							      reg, clr, set)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
new file mode 100644
index 000000000000..29b0ecef980a
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -0,0 +1,149 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR	0xc
+#define DCRN_CPR0_CONFIG_DATA	0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR 	0xe
+#define DCRN_SDR0_CONFIG_DATA	0xf
+
+#define SDR0_PFC0		0x4100
+#define SDR0_PFC1		0x4101
+#define SDR0_PFC1_EPS		0x1c00000
+#define SDR0_PFC1_EPS_SHIFT	22
+#define SDR0_PFC1_RMII		0x02000000
+#define SDR0_MFR		0x4300
+#define SDR0_MFR_TAH0 		0x80000000  	/* TAHOE0 Enable */
+#define SDR0_MFR_TAH1 		0x40000000  	/* TAHOE1 Enable */
+#define SDR0_MFR_PCM  		0x10000000  	/* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS  		0x08000000  	/* EMAC int clk */
+#define SDR0_MFR_T0TXFL		0x00080000
+#define SDR0_MFR_T0TXFH		0x00040000
+#define SDR0_MFR_T1TXFL		0x00020000
+#define SDR0_MFR_T1TXFH		0x00010000
+#define SDR0_MFR_E0TXFL		0x00008000
+#define SDR0_MFR_E0TXFH		0x00004000
+#define SDR0_MFR_E0RXFL		0x00002000
+#define SDR0_MFR_E0RXFH		0x00001000
+#define SDR0_MFR_E1TXFL		0x00000800
+#define SDR0_MFR_E1TXFH		0x00000400
+#define SDR0_MFR_E1RXFL		0x00000200
+#define SDR0_MFR_E1RXFH		0x00000100
+#define SDR0_MFR_E2TXFL		0x00000080
+#define SDR0_MFR_E2TXFH		0x00000040
+#define SDR0_MFR_E2RXFL		0x00000020
+#define SDR0_MFR_E2RXFH		0x00000010
+#define SDR0_MFR_E3TXFL		0x00000008
+#define SDR0_MFR_E3TXFH		0x00000004
+#define SDR0_MFR_E3RXFL		0x00000002
+#define SDR0_MFR_E3RXFH		0x00000001
+#define SDR0_UART0		0x0120
+#define SDR0_UART1		0x0121
+#define SDR0_UART2		0x0122
+#define SDR0_UART3		0x0123
+#define SDR0_CUST0		0x4000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR	0x00
+#define DCRN_SRAM0_SB1CR	0x01
+#define DCRN_SRAM0_SB2CR	0x02
+#define DCRN_SRAM0_SB3CR	0x03
+#define  SRAM_SBCR_BU_MASK	0x00000180
+#define  SRAM_SBCR_BS_64KB	0x00000800
+#define  SRAM_SBCR_BU_RO	0x00000080
+#define  SRAM_SBCR_BU_RW	0x00000180
+#define DCRN_SRAM0_BEAR		0x04
+#define DCRN_SRAM0_BESR0	0x05
+#define DCRN_SRAM0_BESR1	0x06
+#define DCRN_SRAM0_PMEG		0x07
+#define DCRN_SRAM0_CID		0x08
+#define DCRN_SRAM0_REVID	0x09
+#define DCRN_SRAM0_DPC		0x0a
+#define  SRAM_DPC_ENABLE	0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG		0x00
+#define  L2C_CFG_L2M		0x80000000
+#define  L2C_CFG_ICU		0x40000000
+#define  L2C_CFG_DCU		0x20000000
+#define  L2C_CFG_DCW_MASK	0x1e000000
+#define  L2C_CFG_TPC		0x01000000
+#define  L2C_CFG_CPC		0x00800000
+#define  L2C_CFG_FRAN		0x00200000
+#define  L2C_CFG_SS_MASK	0x00180000
+#define  L2C_CFG_SS_256		0x00000000
+#define  L2C_CFG_CPIM		0x00040000
+#define  L2C_CFG_TPIM		0x00020000
+#define  L2C_CFG_LIM		0x00010000
+#define  L2C_CFG_PMUX_MASK	0x00007000
+#define  L2C_CFG_PMUX_SNP	0x00000000
+#define  L2C_CFG_PMUX_IF	0x00001000
+#define  L2C_CFG_PMUX_DF	0x00002000
+#define  L2C_CFG_PMUX_DS	0x00003000
+#define  L2C_CFG_PMIM		0x00000800
+#define  L2C_CFG_TPEI		0x00000400
+#define  L2C_CFG_CPEI		0x00000200
+#define  L2C_CFG_NAM		0x00000100
+#define  L2C_CFG_SMCM		0x00000080
+#define  L2C_CFG_NBRM		0x00000040
+#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
+#define DCRN_L2C0_CMD		0x01
+#define  L2C_CMD_CLR		0x80000000
+#define  L2C_CMD_DIAG		0x40000000
+#define  L2C_CMD_INV		0x20000000
+#define  L2C_CMD_CCP		0x10000000
+#define  L2C_CMD_CTE		0x08000000
+#define  L2C_CMD_STRC		0x04000000
+#define  L2C_CMD_STPC		0x02000000
+#define  L2C_CMD_RPMC		0x01000000
+#define  L2C_CMD_HCC		0x00800000
+#define DCRN_L2C0_ADDR		0x02
+#define DCRN_L2C0_DATA		0x03
+#define DCRN_L2C0_SR		0x04
+#define  L2C_SR_CC		0x80000000
+#define  L2C_SR_CPE		0x40000000
+#define  L2C_SR_TPE		0x20000000
+#define  L2C_SR_LRU		0x10000000
+#define  L2C_SR_PCS		0x08000000
+#define DCRN_L2C0_REVID		0x05
+#define DCRN_L2C0_SNP0		0x06
+#define DCRN_L2C0_SNP1		0x07
+#define  L2C_SNP_BA_MASK	0xffff0000
+#define  L2C_SNP_SSR_MASK	0x0000f000
+#define  L2C_SNP_SSR_32G	0x0000f000
+#define  L2C_SNP_ESR		0x00000800
+
+#endif /* __DCR_REGS_H__ */
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
new file mode 100644
index 000000000000..53b283050ab3
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr.h
@@ -0,0 +1,82 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_H
+#define _ASM_POWERPC_DCR_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_DCR
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+#include <asm/dcr-native.h>
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
+#include <asm/dcr-mmio.h>
+#endif
+
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
+/*
+ * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
+ * base from the device-tree
+ */
+#ifdef CONFIG_PPC_MERGE
+struct device_node;
+extern unsigned int dcr_resource_start(struct device_node *np,
+				       unsigned int index);
+extern unsigned int dcr_resource_len(struct device_node *np,
+				     unsigned int index);
+#endif /* CONFIG_PPC_MERGE */
+
+#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_H */
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
new file mode 100644
index 000000000000..f9200a65c632
--- /dev/null
+++ b/arch/powerpc/include/asm/delay.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_DELAY_H
+#define _ASM_POWERPC_DELAY_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
+ * Anton Blanchard.
+ */
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+
+/*
+ * On shared processor machines the generic implementation of mdelay can
+ * result in large errors. While each iteration of the loop inside mdelay
+ * is supposed to take 1ms, the hypervisor could sleep our partition for
+ * longer (eg 10ms). With the right timing these errors can add up.
+ *
+ * Since there is no 32bit overflow issue on 64bit kernels, just call
+ * udelay directly.
+ */
+#ifdef CONFIG_PPC64
+#define mdelay(n)	udelay((n) * 1000)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
new file mode 100644
index 000000000000..228ab2a315b9
--- /dev/null
+++ b/arch/powerpc/include/asm/device.h
@@ -0,0 +1,24 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_POWERPC_DEVICE_H
+#define _ASM_POWERPC_DEVICE_H
+
+struct dma_mapping_ops;
+struct device_node;
+
+struct dev_archdata {
+	/* Optional pointer to an OF device node */
+	struct device_node	*of_node;
+
+	/* DMA operations on that device */
+	struct dma_mapping_ops	*dma_ops;
+	void			*dma_data;
+
+	/* NUMA node if applicable */
+	int			numa_node;
+};
+
+#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/div64.h b/arch/powerpc/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/powerpc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..c7ca45f97dd2
--- /dev/null
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (C) 2004 IBM
+ *
+ * Implements the generic device dma API for powerpc.
+ * the pci and vio busses
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/cache.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping.  These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices.  Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+#define __dma_sync_page(pg, off, sz, rw)	((void)0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+/*
+ * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
+ */
+struct dma_mapping_ops {
+	void *		(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void		(*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*dma_supported)(struct device *dev, u64 mask);
+	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
+};
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+		return NULL;
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+	if (dma_ops->dma_supported == NULL)
+		return 1;
+	return dma_ops->dma_supported(dev, mask);
+}
+
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return -EIO;
+	if (dma_ops->set_dma_mask != NULL)
+		return dma_ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev,
+					      void *cpu_addr,
+					      size_t size,
+					      enum dma_data_direction direction,
+					      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev,
+					  dma_addr_t dma_addr,
+					  size_t size,
+					  enum dma_data_direction direction,
+					  struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+}
+
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+					    struct page *page,
+					    unsigned long offset, size_t size,
+					    enum dma_data_direction direction,
+					    struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, page_address(page) + offset, size,
+			direction, attrs);
+}
+
+static inline void dma_unmap_page_attrs(struct device *dev,
+					dma_addr_t dma_address,
+					size_t size,
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev,
+				      struct scatterlist *sg,
+				      int nhwentries,
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
+}
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_mapping_ops dma_direct_ops;
+
+#else /* CONFIG_PPC64 */
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t * dma_handle,
+				       gfp_t gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+	void *ret;
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+
+	return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(ptr, size, direction);
+
+	return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync_page(page, offset, size, direction);
+
+	return page_to_bus(page) + offset;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+	   enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
+	}
+
+	return nents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	/* We don't do anything here. */
+}
+
+#endif /* CONFIG_PPC64 */
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_PPC64
+	return (dma_addr == DMA_ERROR_CODE);
+#else
+	return 0;
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d, h)	(0)
+#else
+#define dma_is_consistent(d, h)	(1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef CONFIG_PPC64
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+#else
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+#endif
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
new file mode 100644
index 000000000000..a7e06e25c708
--- /dev/null
+++ b/arch/powerpc/include/asm/dma.h
@@ -0,0 +1,360 @@
+#ifndef _ASM_POWERPC_DMA_H
+#define _ASM_POWERPC_DMA_H
+#ifdef __KERNEL__
+
+/*
+ * Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes.  There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform.  Take what you read
+ * with a grain of salt.
+ */
+
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS		(~0UL)
+
+#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
+#define DMA_LO_PAGE_1		0x83
+#define DMA_LO_PAGE_2		0x81
+#define DMA_LO_PAGE_3		0x82
+#define DMA_LO_PAGE_5		0x8B
+#define DMA_LO_PAGE_6		0x89
+#define DMA_LO_PAGE_7		0x8A
+
+#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
+#define DMA_HI_PAGE_1		0x483
+#define DMA_HI_PAGE_2		0x481
+#define DMA_HI_PAGE_3		0x482
+#define DMA_HI_PAGE_5		0x48B
+#define DMA_HI_PAGE_6		0x489
+#define DMA_HI_PAGE_7		0x48A
+
+#define DMA1_EXT_REG		0x40B
+#define DMA2_EXT_REG		0x4D6
+
+#ifndef __powerpc64__
+    /* in arch/ppc/kernel/setup.c -- Cort */
+    extern unsigned int DMA_MODE_WRITE;
+    extern unsigned int DMA_MODE_READ;
+    extern unsigned long ISA_DMA_THRESHOLD;
+#else
+    #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+    #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#endif
+
+#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT		0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd = 0x00;
+
+	if (dmanr != 4) {
+		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
+	}
+	if (dmanr <= 3) {
+		dma_outb(dmanr, DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
+	} else {
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+	}
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_LO_PAGE_0);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_LO_PAGE_1);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_LO_PAGE_2);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_LO_PAGE_3);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+		break;
+	case 5:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+		break;
+	case 6:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+		break;
+	case 7:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+		break;
+	}
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3) {
+		dma_outb(phys & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((phys >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	} else {
+		dma_outb((phys >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+	set_dma_page(dmanr, phys >> 16);
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3) {
+		dma_outb(count & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr <= 3)
+	    ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3) ? count : (count << 1);
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif	/* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_DMA_H */
diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h
new file mode 100644
index 000000000000..6ead88bbfbb8
--- /dev/null
+++ b/arch/powerpc/include/asm/edac.h
@@ -0,0 +1,40 @@
+/*
+ * PPC EDAC common defs
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing.  It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static __inline__ void atomic_scrub(void *va, u32 size)
+{
+	unsigned int *virt_addr = va;
+	unsigned int temp;
+	unsigned int i;
+
+	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+		/* Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 */
+		__asm__ __volatile__ ("\n\
+				1:	lwarx	%0,0,%1\n\
+					stwcx.	%0,0,%1\n\
+					bne-	1b\n\
+					isync"
+					: "=&r"(temp)
+					: "r"(virt_addr)
+					: "cr0", "memory");
+	}
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
new file mode 100644
index 000000000000..b886bec67016
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh.h
@@ -0,0 +1,211 @@
+/*
+ * eeh.h
+ * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_EEH_H
+#define _PPC64_EEH_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/string.h>
+
+struct pci_dev;
+struct pci_bus;
+struct device_node;
+
+#ifdef CONFIG_EEH
+
+extern int eeh_subsystem_enabled;
+
+/* Values for eeh_mode bits in device_node */
+#define EEH_MODE_SUPPORTED     (1<<0)
+#define EEH_MODE_NOCHECK       (1<<1)
+#define EEH_MODE_ISOLATED      (1<<2)
+#define EEH_MODE_RECOVERING    (1<<3)
+#define EEH_MODE_IRQ_DISABLED  (1<<4)
+
+/* Max number of EEH freezes allowed before we consider the device
+ * to be permanently disabled. */
+#define EEH_MAX_ALLOWED_FREEZES 5
+
+void __init eeh_init(void);
+unsigned long eeh_check_failure(const volatile void __iomem *token,
+				unsigned long val);
+int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
+void __init pci_addr_cache_build(void);
+
+/**
+ * eeh_add_device_early
+ * eeh_add_device_late
+ *
+ * Perform eeh initialization for devices added after boot.
+ * Call eeh_add_device_early before doing any i/o to the
+ * device (including config space i/o).  Call eeh_add_device_late
+ * to finish the eeh setup for this device.
+ */
+void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_tree_late(struct pci_bus *);
+
+/**
+ * eeh_remove_device_recursive - undo EEH for device & children.
+ * @dev: pci device to be removed
+ *
+ * As above, this removes the device; it also removes child
+ * pci devices as well.
+ */
+void eeh_remove_bus_device(struct pci_dev *);
+
+/**
+ * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
+ *
+ * If this macro yields TRUE, the caller relays to eeh_check_failure()
+ * which does further tests out of line.
+ */
+#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_subsystem_enabled)
+
+/*
+ * Reads from a device which has been isolated by EEH will return
+ * all 1s.  This macro gives an all-1s value of the given size (in
+ * bytes: 1, 2, or 4) for comparing with the result of a read.
+ */
+#define EEH_IO_ERROR_VALUE(size)	(~0U >> ((4 - (size)) * 8))
+
+#else /* !CONFIG_EEH */
+static inline void eeh_init(void) { }
+
+static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	return val;
+}
+
+static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+{
+	return 0;
+}
+
+static inline void pci_addr_cache_build(void) { }
+
+static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
+static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
+#define EEH_POSSIBLE_ERROR(val, type) (0)
+#define EEH_IO_ERROR_VALUE(size) (-1UL)
+#endif /* CONFIG_EEH */
+
+/*
+ * MMIO read/write operations with EEH support.
+ */
+static inline u8 eeh_readb(const volatile void __iomem *addr)
+{
+	u8 val = in_8(addr);
+	if (EEH_POSSIBLE_ERROR(val, u8))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw(const volatile void __iomem *addr)
+{
+	u16 val = in_le16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl(const volatile void __iomem *addr)
+{
+	u32 val = in_le32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq(const volatile void __iomem *addr)
+{
+	u64 val = in_le64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw_be(const volatile void __iomem *addr)
+{
+	u16 val = in_be16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl_be(const volatile void __iomem *addr)
+{
+	u32 val = in_be32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq_be(const volatile void __iomem *addr)
+{
+	u64 val = in_be64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline void eeh_memcpy_fromio(void *dest, const
+				     volatile void __iomem *src,
+				     unsigned long n)
+{
+	_memcpy_fromio(dest, src, n);
+
+	/* Look for ffff's here at dest[n].  Assume that at least 4 bytes
+	 * were copied. Check all four bytes.
+	 */
+	if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
+		eeh_check_failure(src, *((u32 *)(dest + n - 4)));
+}
+
+/* in-string eeh macros */
+static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insb(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
+		eeh_check_failure(addr, *(u8*)buf);
+}
+
+static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insw(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
+		eeh_check_failure(addr, *(u16*)buf);
+}
+
+static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
+			      int nl)
+{
+	_insl(addr, buf, nl);
+	if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
+		eeh_check_failure(addr, *(u32*)buf);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_EEH_H */
diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
new file mode 100644
index 000000000000..cc3cb04539ac
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh_event.h
@@ -0,0 +1,53 @@
+/*
+ *	eeh_event.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#ifndef ASM_POWERPC_EEH_EVENT_H
+#define ASM_POWERPC_EEH_EVENT_H
+#ifdef __KERNEL__
+
+/** EEH event -- structure holding pci controller data that describes
+ *  a change in the isolation status of a PCI slot.  A pointer
+ *  to this struct is passed as the data pointer in a notify callback.
+ */
+struct eeh_event {
+	struct list_head     list;
+	struct device_node 	*dn;   /* struct device node */
+	struct pci_dev       *dev;  /* affected device */
+};
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine builds a PCI error event which will be delivered
+ * to all listeners on the eeh_notifier_chain.
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+                            struct pci_dev *dev);
+
+/* Main recovery function */
+struct pci_dn * handle_eeh_events (struct eeh_event *);
+
+#endif /* __KERNEL__ */
+#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
new file mode 100644
index 000000000000..80d1f399ee51
--- /dev/null
+++ b/arch/powerpc/include/asm/elf.h
@@ -0,0 +1,424 @@
+#ifndef _ASM_POWERPC_ELF_H
+#define _ASM_POWERPC_ELF_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/page.h>
+#include <asm/string.h>
+#endif
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+#include <asm/auxvec.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* keep this the last entry. */
+#define R_PPC_NUM		95
+
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+typedef elf_gregset_t32 compat_elf_gregset_t;
+
+/*
+ * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
+ */
+#ifdef __powerpc64__
+# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
+# define ELF_GREG_TYPE	elf_greg_t64
+#else
+# define ELF_NEVRREG	34	/* includes acc (as 2) */
+# define ELF_NVRREG	33	/* includes vscr */
+# define ELF_GREG_TYPE	elf_greg_t32
+# define ELF_ARCH	EM_PPC
+# define ELF_CLASS	ELFCLASS32
+# define ELF_DATA	ELFDATA2MSB
+#endif /* __powerpc64__ */
+
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+#endif /* ELF_ARCH */
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  
+ *
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+#ifdef __powerpc64__
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
+#endif
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x20000000)
+
+/*
+ * Our registers are always unsigned longs, whether we're a 32 bit
+ * process or 64 bit, on either a 64 bit or 32 bit kernel.
+ *
+ * This macro relies on elf_regs[i] having the right type to truncate to,
+ * either u32 or u64.  It defines the body of the elf_core_copy_regs
+ * function, either the native one with elf_gregset_t elf_regs or
+ * the 32-bit one with elf_gregset_t32 elf_regs.
+ */
+#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
+	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
+			   (size_t)ELF_NGREG);			  \
+	for (i = 0; i < nregs; i++) \
+		elf_regs[i] = ((unsigned long *) regs)[i]; \
+	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
+
+/* Common routine for both 32-bit and 64-bit native processes */
+static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
+					  struct pt_regs *regs)
+{
+	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
+}
+#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
+
+typedef elf_vrregset_t elf_fpxregset_t;
+
+/* ELF_HWCAP yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(cur_cpu_spec->platform)
+
+/* While ELF_PLATFORM indicates the ISA supported by the platform, it
+ * may not accurately reflect the underlying behavior of the hardware
+ * (as in the case of running in Power5+ compatibility mode on a
+ * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
+ * that are tuned for the real hardware.
+ */
+#define ELF_BASE_PLATFORM (powerpc_base_platform)
+
+#ifdef __powerpc64__
+# define ELF_PLAT_INIT(_r, load_addr)	do {	\
+	_r->gpr[2] = load_addr; 		\
+} while (0)
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+# define SET_PERSONALITY(ex, ibcs2)				\
+do {								\
+	unsigned long new_flags = 0;				\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		new_flags = _TIF_32BIT;				\
+	if ((current_thread_info()->flags & _TIF_32BIT)		\
+	    != new_flags)					\
+		set_thread_flag(TIF_ABI_PENDING);		\
+	else							\
+		clear_thread_flag(TIF_ABI_PENDING);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |			\
+			(current->personality & (~PER_MASK)));	\
+} while (0)
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically. This
+ * is only required to work around bugs in old 32bit toolchains. Since
+ * the 64bit ABI has never had these issues dont enable the workaround
+ * even if we have an executable stack.
+ */
+# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
+		(exec_stk != EXSTACK_DISABLE_X) : 0)
+#else 
+# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif /* __powerpc64__ */
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+
+#endif /* __KERNEL__ */
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
+} while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+#ifdef  __KERNEL__
+
+#ifdef CONFIG_SPU_BASE
+/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
+#define NT_SPU		1
+
+#define ARCH_HAVE_EXTRA_ELF_NOTES
+
+#endif /* CONFIG_SPU_BASE */
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_POWERPC_ELF_H */
diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/powerpc/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/asm/errno.h
new file mode 100644
index 000000000000..8c145fd17d86
--- /dev/null
+++ b/arch/powerpc/include/asm/errno.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_POWERPC_ERRNO_H
+#define _ASM_POWERPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef	EDEADLOCK
+#define	EDEADLOCK	58	/* File locking deadlock error */
+
+#define _LAST_ERRNO	516
+
+#endif	/* _ASM_POWERPC_ERRNO_H */
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
new file mode 100644
index 000000000000..329148b5acc6
--- /dev/null
+++ b/arch/powerpc/include/asm/exception.h
@@ -0,0 +1,311 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9		0
+#define EX_R10		8
+#define EX_R11		16
+#define EX_R12		24
+#define EX_R13		32
+#define EX_SRR0		40
+#define EX_DAR		48
+#define EX_DSISR	56
+#define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#ifdef CONFIG_CRASH_DUMP
+#define LOAD_HANDLER(reg, label)					\
+	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
+	ori	reg,reg,(label)@l;	/* .. and the rest */
+#else
+#define LOAD_HANDLER(reg, label)					\
+	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
+#endif
+
+#define EXCEPTION_PROLOG_1(area)				\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9
+
+/*
+ * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
+ * The firmware calls the registered system_reset_fwnmi and
+ * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
+ * a 32bit application at the time of the event.
+ * This firmware bug is present on POWER4 and JS20.
+ */
+#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	/* force 64bit mode */						\
+	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
+	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
+	/* done 64bit mode */						\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)				   \
+	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
+	mr	r10,r1;			/* Save r1			*/ \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
+	beq-	1f;							   \
+	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
+1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
+	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
+	std	r10,0(r1);		/* make stack chain pointer	*/ \
+	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
+	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
+	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
+	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
+	ld	r10,area+EX_R10(r13);					   \
+	std	r9,GPR9(r1);						   \
+	std	r10,GPR10(r1);						   \
+	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
+	ld	r10,area+EX_R12(r13);					   \
+	ld	r11,area+EX_R13(r13);					   \
+	std	r9,GPR11(r1);						   \
+	std	r10,GPR12(r1);						   \
+	std	r11,GPR13(r1);						   \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
+	mflr	r9;			/* save LR in stackframe	*/ \
+	std	r9,_LINK(r1);						   \
+	mfctr	r10;			/* save CTR in stackframe	*/ \
+	std	r10,_CTR(r1);						   \
+	lbz	r10,PACASOFTIRQEN(r13);				   \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
+	std	r10,SOFTE(r1);						   \
+	std	r11,_XER(r1);						   \
+	li	r9,(n)+1;						   \
+	std	r9,_TRAP(r1);		/* set trap number		*/ \
+	li	r10,0;							   \
+	ld	r11,exception_marker@toc(r2);				   \
+	std	r10,RESULT(r1);		/* clear regs->result		*/ \
+	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)			\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
+	. = n;								\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	HMT_MEDIUM;							\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	lbz	r10,PACASOFTIRQEN(r13);					\
+	mfcr	r9;							\
+	cmpwi	r10,0;							\
+	beq	masked_interrupt;					\
+	mfspr	r10,SPRN_SPRG1;						\
+	std	r10,PACA_EXGEN+EX_R13(r13);				\
+	std	r11,PACA_EXGEN+EX_R11(r13);				\
+	std	r12,PACA_EXGEN+EX_R12(r13);				\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label##_common)				\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+BEGIN_FW_FTR_SECTION;				\
+	stb	r11,PACAHARDIRQEN(r13);		\
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
+	TRACE_DISABLE_INTS;			\
+BEGIN_FW_FTR_SECTION;				\
+	mfmsr	r10;				\
+	ori	r10,r10,MSR_EE;			\
+	mtmsrd	r10,1;				\
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#else
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+	stb	r11,PACAHARDIRQEN(r13);		\
+	TRACE_DISABLE_INTS
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS				\
+	ld	r12,_MSR(r1);			\
+	mfmsr	r11;				\
+	rlwimi	r11,r12,0,MSR_EE;		\
+	mtmsrd	r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+BEGIN_FTR_SECTION					\
+	bl	.ppc64_runlatch_on;			\
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h
new file mode 100644
index 000000000000..411af8d17a69
--- /dev/null
+++ b/arch/powerpc/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
+						 vma->vm_end - vma->vm_start,
+						 vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/asm/fcntl.h
new file mode 100644
index 000000000000..ce5c4516d404
--- /dev/null
+++ b/arch/powerpc/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+#define O_DIRECTORY      040000	/* must be a directory */
+#define O_NOFOLLOW      0100000	/* don't follow links */
+#define O_LARGEFILE     0200000
+#define O_DIRECT	0400000	/* direct disk access hint */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
new file mode 100644
index 000000000000..a1029967620b
--- /dev/null
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
+#define __ASM_POWERPC_FEATURE_FIXUPS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * Feature section common macros
+ *
+ * Note that the entries now contain offsets between the table entry
+ * and the code rather than absolute code pointers in order to be
+ * useable with the vdso shared library. There is also an assumption
+ * that values will be negative, that is, the fixup table has to be
+ * located after the code it fixes up.
+ */
+#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
+/* 64 bits kernel, 32 bits code (ie. vdso32) */
+#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
+#else
+/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
+#define FTR_ENTRY_LONG		PPC_LONG
+#define FTR_ENTRY_OFFSET	PPC_LONG
+#endif
+
+#define START_FTR_SECTION(label)	label##1:
+
+#define FTR_SECTION_ELSE_NESTED(label)			\
+label##2:						\
+	.pushsection __ftr_alt_##label,"a";		\
+	.align 2;					\
+label##3:
+
+#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)	\
+label##4:						\
+	.popsection;					\
+	.pushsection sect,"a";				\
+	.align 3;					\
+label##5:					       	\
+	FTR_ENTRY_LONG msk;				\
+	FTR_ENTRY_LONG val;				\
+	FTR_ENTRY_OFFSET label##1b-label##5b;		\
+	FTR_ENTRY_OFFSET label##2b-label##5b;	 	\
+	FTR_ENTRY_OFFSET label##3b-label##5b;		\
+	FTR_ENTRY_OFFSET label##4b-label##5b;	 	\
+	.popsection;
+
+
+/* CPU feature dependent sections */
+#define BEGIN_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FTR_SECTION		START_FTR_SECTION(97)
+
+#define END_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+
+#define END_FTR_SECTION(msk, val)		\
+	END_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
+
+/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
+#define FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FTR_SECTION_END(msk, val)	\
+	ALT_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+/* Firmware feature dependent sections */
+#define BEGIN_FW_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FW_FTR_SECTION			START_FTR_SECTION(97)
+
+#define END_FW_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+
+#define END_FW_FTR_SECTION(msk, val)		\
+	END_FW_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FW_FTR_SECTION_IFSET(msk)	END_FW_FTR_SECTION((msk), (msk))
+#define END_FW_FTR_SECTION_IFCLR(msk)	END_FW_FTR_SECTION((msk), 0)
+
+/* Firmware feature sections with alternatives */
+#define FW_FTR_SECTION_ELSE_NESTED(label)	FTR_SECTION_ELSE_NESTED(label)
+#define FW_FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FW_FTR_SECTION_END(msk, val)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FW_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+#endif /* __ASSEMBLY__ */
+
+/* LWSYNC feature sections */
+#define START_LWSYNC_SECTION(label)	label##1:
+#define MAKE_LWSYNC_SECTION_ENTRY(label, sect)		\
+label##2:						\
+	.pushsection sect,"a";				\
+	.align 2;					\
+label##3:					       	\
+	.long label##1b-label##3b;			\
+	.popsection;
+
+#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
new file mode 100644
index 000000000000..3a179827528d
--- /dev/null
+++ b/arch/powerpc/include/asm/firmware.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_FIRMWARE_H
+#define __ASM_POWERPC_FIRMWARE_H
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+/* firmware feature bitmask values */
+#define FIRMWARE_MAX_FEATURES 63
+
+#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
+#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
+#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
+#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
+#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
+#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
+#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
+#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
+#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
+#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
+#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
+#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
+#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
+#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
+#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
+#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
+#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
+#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
+#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
+#define FW_FEATURE_ISERIES	ASM_CONST(0x0000000000200000)
+#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
+#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
+#define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
+
+#ifndef __ASSEMBLY__
+
+enum {
+#ifdef CONFIG_PPC64
+	FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE |
+		FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY |
+		FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM |
+		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
+		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
+		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
+		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+	FW_FEATURE_PSERIES_ALWAYS = 0,
+	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
+	FW_FEATURE_CELLEB_ALWAYS = 0,
+	FW_FEATURE_NATIVE_POSSIBLE = 0,
+	FW_FEATURE_NATIVE_ALWAYS = 0,
+	FW_FEATURE_POSSIBLE =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS |
+#endif
+		0,
+	FW_FEATURE_ALWAYS =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS &
+#endif
+		FW_FEATURE_POSSIBLE,
+
+#else /* CONFIG_PPC64 */
+	FW_FEATURE_POSSIBLE = 0,
+	FW_FEATURE_ALWAYS = 0,
+#endif
+};
+
+/* This is used to identify firmware features which are available
+ * to the kernel.
+ */
+extern unsigned long	powerpc_firmware_features;
+
+#define firmware_has_feature(feature)					\
+	((FW_FEATURE_ALWAYS & (feature)) ||				\
+		(FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
+
+extern void system_reset_fwnmi(void);
+extern void machine_check_fwnmi(void);
+
+/* This is true if we are using the firmware NMI handler (typically LPAR) */
+extern int fwnmi_active;
+
+extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
new file mode 100644
index 000000000000..8428b38a3d30
--- /dev/null
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -0,0 +1,106 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *   Port to powerpc added by Kumar Gala
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+extern unsigned long FIXADDR_TOP;
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	/* FIX_PCIE_MCFG, */
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					phys_addr_t phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+		__set_fixmap(idx, 0, __pgprot(0))
+
+#define __FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
new file mode 100644
index 000000000000..24bd34c57e9d
--- /dev/null
+++ b/arch/powerpc/include/asm/floppy.h
@@ -0,0 +1,213 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_POWERPC_FLOPPY_H
+#define __ASM_POWERPC_FLOPPY_H
+#ifdef __KERNEL__
+
+#include <asm/machdep.h>
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value,port)	outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()	 fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA, mode)
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
+#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#include <linux/pci.h>
+#include <asm/ppc-pci.h>	/* for isa_bridge_pcidev */
+
+#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+	void (*_disable_dma)(unsigned int dmanr);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+	unsigned char st;
+	int lcount;
+	char *lptr;
+
+	if (!doing_vdma)
+		return floppy_interrupt(irq, dev_id);
+
+
+	st = 1;
+	for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+	     lcount; lcount--, lptr++) {
+		st=inb(virtual_dma_port+4) & 0xa0 ;
+		if (st != 0xa0)
+			break;
+		if (virtual_dma_mode)
+			outb_p(*lptr, virtual_dma_port+5);
+		else
+			*lptr = inb_p(virtual_dma_port+5);
+	}
+	virtual_dma_count = lcount;
+	virtual_dma_addr = lptr;
+	st = inb(virtual_dma_port+4);
+
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+		doing_vdma = 0;
+		floppy_interrupt(irq, dev_id);
+		return IRQ_HANDLED;
+	}
+	return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+	doing_vdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_vdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	doing_vdma = 0;
+	dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */
+		bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+static struct fd_dma_ops real_dma_ops =
+{
+	._disable_dma = disable_dma,
+	._free_dma = free_dma,
+	._get_dma_residue = get_dma_residue,
+	._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+	._disable_dma = vdma_disable_dma,
+	._free_dma = vdma_nop,
+	._get_dma_residue = vdma_get_dma_residue,
+	._dma_setup = vdma_dma_setup
+};
+
+static int fd_request_dma(void)
+{
+	if (can_use_virtual_dma & 1) {
+		fd_ops = &virt_dma_ops;
+		return 0;
+	}
+	else {
+		fd_ops = &real_dma_ops;
+		return request_dma(FLOPPY_DMA, "floppy");
+	}
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2			/* Don't change this! */
+#define N_DRIVE 8
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s)	(0)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h
new file mode 100644
index 000000000000..9361cd5342cc
--- /dev/null
+++ b/arch/powerpc/include/asm/fs_pd.h
@@ -0,0 +1,50 @@
+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+#include <sysdev/fsl_soc.h>
+#include <asm/time.h>
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+
+#if defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#endif
+
+#define cpm2_map(member) (&cpm2_immr->member)
+#define cpm2_map_size(member, size) (&cpm2_immr->member)
+#define cpm2_unmap(addr) do {} while(0)
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/mpc8xx.h>
+
+extern immap_t __iomem *mpc8xx_immr;
+
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) do {} while (0)
+#endif
+
+static inline int uart_baudrate(void)
+{
+        return get_baudrate();
+}
+
+static inline int uart_clock(void)
+{
+        return ppc_proc_freq;
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
new file mode 100644
index 000000000000..8e8c9b5032d3
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_gtm.h
@@ -0,0 +1,47 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_FSL_GTM_H
+#define __ASM_FSL_GTM_H
+
+#include <linux/types.h>
+
+struct gtm;
+
+struct gtm_timer {
+	unsigned int irq;
+
+	struct gtm *gtm;
+	bool requested;
+	u8 __iomem *gtcfr;
+	__be16 __iomem *gtmdr;
+	__be16 __iomem *gtpsr;
+	__be16 __iomem *gtcnr;
+	__be16 __iomem *gtrfr;
+	__be16 __iomem *gtevr;
+};
+
+extern struct gtm_timer *gtm_get_timer16(void);
+extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+						  unsigned int timer);
+extern void gtm_put_timer16(struct gtm_timer *tmr);
+extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
+			     bool reload);
+extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
+				 bool reload);
+extern void gtm_stop_timer16(struct gtm_timer *tmr);
+extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
+
+#endif /* __ASM_FSL_GTM_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
new file mode 100644
index 000000000000..303f5484c050
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -0,0 +1,311 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct fsl_lbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct fsl_lbc_regs {
+	struct fsl_lbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+#define MxMR_OP_NO	(0 << 28) /**< normal operation */
+#define MxMR_OP_WA	(1 << 28) /**< write array */
+#define MxMR_OP_RA	(2 << 28) /**< read array */
+#define MxMR_OP_RP	(3 << 28) /**< run pattern */
+#define MxMR_MAD	0x3f      /**< machine address */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+extern spinlock_t fsl_lbc_lock;
+
+/*
+ * FSL UPM routines
+ */
+struct fsl_upm {
+	__be32 __iomem *mxmr;
+	int width;
+};
+
+extern int fsl_lbc_find(phys_addr_t addr_base);
+extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
+
+/**
+ * fsl_upm_start_pattern - start UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @pat_offset:	UPM pattern offset for the command to be executed
+ *
+ * This routine programmes UPM so the next memory access that hits an UPM
+ * will trigger pattern execution, starting at pat_offset.
+ */
+static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
+{
+	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
+}
+
+/**
+ * fsl_upm_end_pattern - end UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ *
+ * This routine reverts UPM to normal operation mode.
+ */
+static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+	clrbits32(upm->mxmr, MxMR_OP_RP);
+
+	while (in_be32(upm->mxmr) & MxMR_OP_RP)
+		cpu_relax();
+}
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base:	remapped pointer to where memory access should happen
+ * @mar:	MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
+				      void __iomem *io_base, u32 mar)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+	switch (upm->width) {
+	case 8:
+		out_8(io_base, 0x0);
+		break;
+	case 16:
+		out_be16(io_base, 0x0);
+		break;
+	case 32:
+		out_be32(io_base, 0x0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+	return ret;
+}
+
+#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
new file mode 100644
index 000000000000..de921326cca8
--- /dev/null
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_POWERPC_FTRACE
+#define _ASM_POWERPC_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
new file mode 100644
index 000000000000..6d406c5c5de4
--- /dev/null
+++ b/arch/powerpc/include/asm/futex.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_FUTEX_H
+#define _ASM_POWERPC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+  __asm__ __volatile ( \
+	LWSYNC_ON_SMP \
+"1:	lwarx	%0,0,%2\n" \
+	insn \
+	PPC405_ERR77(0, %2) \
+"2:	stwcx.	%1,0,%2\n" \
+	"bne-	1b\n" \
+	"li	%1,0\n" \
+"3:	.section .fixup,\"ax\"\n" \
+"4:	li	%1,%3\n" \
+	"b	3b\n" \
+	".previous\n" \
+	".section __ex_table,\"a\"\n" \
+	".align 3\n" \
+	PPC_LONG "1b,4b,2b,4b\n" \
+	".previous" \
+	: "=&r" (oldval), "=&r" (ret) \
+	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+	: "cr0", "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+        __asm__ __volatile__ (
+        LWSYNC_ON_SMP
+"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
+        cmpw    0,%0,%3\n\
+        bne-    3f\n"
+        PPC405_ERR77(0,%2)
+"2:     stwcx.  %4,0,%2\n\
+        bne-    1b\n"
+        ISYNC_ON_SMP
+"3:	.section .fixup,\"ax\"\n\
+4:	li	%0,%5\n\
+	b	3b\n\
+	.previous\n\
+	.section __ex_table,\"a\"\n\
+	.align 3\n\
+	" PPC_LONG "1b,4b,2b,4b\n\
+	.previous" \
+        : "=&r" (prev), "+m" (*uaddr)
+        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
+        : "cc", "memory");
+
+        return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_FUTEX_H */
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
new file mode 100644
index 000000000000..ea04632399d8
--- /dev/null
+++ b/arch/powerpc/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h
new file mode 100644
index 000000000000..bd7812a519d4
--- /dev/null
+++ b/arch/powerpc/include/asm/grackle.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_GRACKLE_H
+#define _ASM_POWERPC_GRACKLE_H
+#ifdef __KERNEL__
+/*
+ * Functions for setting up and using a MPC106 northbridge
+ */
+
+#include <asm/pci-bridge.h>
+
+extern void setup_grackle(struct pci_controller *hose);
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
new file mode 100644
index 000000000000..288e14d53b7f
--- /dev/null
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+#ifdef __KERNEL__
+
+#include <asm/irq.h>
+#include <asm/bug.h>
+
+/* The __last_jiffy_stamp field is needed to ensure that no decrementer
+ * interrupt is lost on SMP machines. Since on most CPUs it is in the same
+ * cache line as local_irq_count, it is cheap to access and is also used on UP
+ * for uniformity.
+ */
+typedef struct {
+	unsigned int __softirq_pending;	/* set_bit is used on this */
+	unsigned int __last_jiffy_stamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "illegal vector %d received!\n", irq);
+	BUG();
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h
new file mode 100644
index 000000000000..93f54958a9d1
--- /dev/null
+++ b/arch/powerpc/include/asm/heathrow.h
@@ -0,0 +1,67 @@
+#ifndef _ASM_POWERPC_HEATHROW_H
+#define _ASM_POWERPC_HEATHROW_H
+#ifdef __KERNEL__
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT		0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL	0x32
+#define HEATHROW_CONTRAST_CNTL		0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR			0x34	/* Media bay control */
+#define HEATHROW_FCR			0x38	/* Feature control */
+#define HEATHROW_AUX_CNTL_REG		0x3c	/* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N	0x00000001	/* Also controls modem power */
+#define HRW_BAY_POWER_N		0x00000002
+#define HRW_BAY_PCI_ENABLE	0x00000004
+#define HRW_BAY_IDE_ENABLE	0x00000008
+#define HRW_BAY_FLOPPY_ENABLE	0x00000010
+#define HRW_IDE0_ENABLE		0x00000020
+#define HRW_IDE0_RESET_N	0x00000040
+#define HRW_BAY_DEV_MASK	0x0000001c
+#define HRW_BAY_RESET_N		0x00000080
+#define HRW_IOBUS_ENABLE	0x00000100	/* Internal IDE ? */
+#define HRW_SCC_ENABLE		0x00000200
+#define HRW_MESH_ENABLE		0x00000400
+#define HRW_SWIM_ENABLE		0x00000800
+#define HRW_SOUND_POWER_N	0x00001000
+#define HRW_SOUND_CLK_ENABLE	0x00002000
+#define HRW_SCCA_IO		0x00004000
+#define HRW_SCCB_IO		0x00008000
+#define HRW_PORT_OR_DESK_VIA_N	0x00010000	/* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N	0x00020000	/* ??? (0) */
+#define HRW_HOOK_MB_CNT_N	0x00040000	/* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY	0x00080000	/* ??? (0) */
+#define HRW_AUD_RUN22		0x00100000	/* ??? (1) */
+#define HRW_SCSI_LINK_MODE	0x00200000	/* Read ??? (1) */
+#define HRW_ARB_BYPASS		0x00400000	/* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N	0x00800000	/* Media bay */
+#define HRW_SLOW_SCC_PCLK	0x01000000	/* ??? (0) */
+#define HRW_RESET_SCC		0x02000000
+#define HRW_MFDC_CELL_ENABLE	0x04000000	/* ??? (0) */
+#define HRW_USE_MFDC		0x08000000	/* ??? (0) */
+#define HRW_BMAC_IO_ENABLE	0x60000000	/* two bits, not documented in OF */
+#define HRW_BMAC_RESET		0x80000000	/* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS		(HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET	0x6d
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
new file mode 100644
index 000000000000..5d99b6489d56
--- /dev/null
+++ b/arch/powerpc/include/asm/highmem.h
@@ -0,0 +1,138 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fixmap.h>
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 	(1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_BASE	((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+	flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	return kmap_atomic_prot(page, type, kmap_prot);
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+	unsigned long idx, vaddr = (unsigned long) ptr;
+	pte_t *pte;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	idx = virt_to_fix(vaddr);
+	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
+	return pte_page(*pte);
+}
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
new file mode 100644
index 000000000000..26f0d0ab27a5
--- /dev/null
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_HUGETLB_H
+#define _ASM_POWERPC_HUGETLB_H
+
+#include <asm/page.h>
+
+
+int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
+			   unsigned long len);
+
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+			    unsigned long end, unsigned long floor,
+			    unsigned long ceiling);
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
new file mode 100644
index 000000000000..fbe2932fa9e9
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -0,0 +1,296 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
+
+#define HVSC			.long 0x44000022
+
+#define H_SUCCESS	0
+#define H_BUSY		1	/* Hardware busy -- retry later */
+#define H_CLOSED	2	/* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
+#define H_PARTIAL       5
+#define H_IN_PROGRESS	14	/* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING	17	/* returned from H_POLL_PENDING */
+#define H_CONTINUE	18	/* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
+#define H_HARDWARE	-1	/* Hardware error */
+#define H_FUNCTION	-2	/* Function not supported */
+#define H_PRIVILEGE	-3	/* Caller not privileged */
+#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE	-5	/* Illegal msr value */
+#define H_PTEG_FULL	-6	/* PTEG is full */
+#define H_NOT_FOUND	-7	/* PTE was not found" */
+#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM	-9
+#define H_AUTHORITY	-10
+#define H_PERMISSION	-11
+#define H_DROPPED	-12
+#define H_SOURCE_PARM	-13
+#define H_DEST_PARM	-14
+#define H_REMOTE_PARM	-15
+#define H_RESOURCE	-16
+#define H_ADAPTER_PARM  -17
+#define H_RH_PARM       -18
+#define H_RCQ_PARM      -19
+#define H_SCQ_PARM      -20
+#define H_EQ_PARM       -21
+#define H_RT_PARM       -22
+#define H_ST_PARM       -23
+#define H_SIGT_PARM     -24
+#define H_TOKEN_PARM    -25
+#define H_MLENGTH_PARM  -27
+#define H_MEM_PARM      -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM     -30
+#define H_PORT_PARM     -31
+#define H_MCG_PARM      -32
+#define H_VL_PARM       -33
+#define H_TSIZE_PARM    -34
+#define H_TRACE_PARM    -35
+
+#define H_MASK_PARM     -37
+#define H_MCG_FULL      -38
+#define H_ALIAS_EXIST   -39
+#define H_P_COUNTER     -40
+#define H_TABLE_FULL    -41
+#define H_ALT_TABLE     -42
+#define H_MR_CONDITION  -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE       -45
+#define H_RESCINDEND    -46
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time.  Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+			     && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID          0
+#define H_VASI_ENABLED          1
+#define H_VASI_ABORTED          2
+#define H_VASI_SUSPENDING       3
+#define H_VASI_SUSPENDED        4
+#define H_VASI_RESUMED          5
+#define H_VASI_COMPLETED        6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
+#define H_DABRX_KERNEL		(1UL<<(63-62))
+#define H_DABRX_USER		(1UL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT          4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE			0xE0
+#define H_CONFER		0xE4
+#define H_PROD			0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC			0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA		0x110
+#define H_REGISTER_LOGICAL_LAN	0x114
+#define H_FREE_LOGICAL_LAN	0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN	0x120
+#define H_BULK_REMOVE		0x124
+#define H_MULTICAST_CTRL	0x130
+#define H_SET_XDABR		0x134
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GETC      0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING		0x1D8
+#define H_ILLAN_ATTRIBUTES	0x244
+#define H_JOIN			0x298
+#define H_VASI_STATE            0x2A4
+#define H_ENABLE_CRQ		0x2B0
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define MAX_HCALL_OPCODE	H_GET_MPP
+
+#ifndef __ASSEMBLY__
+
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
+ *
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
+ */
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* For hcall instrumentation.  One structure per-hcall, per-CPU */
+struct hcall_stats {
+	unsigned long	num_calls;	/* number of calls (on this CPU) */
+	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
+	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+};
+#define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
+
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
new file mode 100644
index 000000000000..35ea69e8121f
--- /dev/null
+++ b/arch/powerpc/include/asm/hvconsole.h
@@ -0,0 +1,41 @@
+/*
+ * hvconsole.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * LPAR console support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCONSOLE_H
+#define _PPC64_HVCONSOLE_H
+#ifdef __KERNEL__
+
+/*
+ * PSeries firmware will only send/recv up to 16 bytes of character data per
+ * hcall.
+ */
+#define MAX_VIO_PUT_CHARS	16
+#define SIZE_VIO_GET_CHARS	16
+
+/*
+ * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
+ * parm is included to conform to put_chars() function pointer template
+ */
+extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
+extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCONSOLE_H */
diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h
new file mode 100644
index 000000000000..67d7da3a4da4
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcserver.h
@@ -0,0 +1,59 @@
+/*
+ * hvcserver.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCSERVER_H
+#define _PPC64_HVCSERVER_H
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+/* Converged Location Code length */
+#define HVCS_CLC_LENGTH	79
+
+/**
+ * hvcs_partner_info - an element in a list of partner info
+ * @node: list_head denoting this partner_info struct's position in the list of
+ *	partner info.
+ * @unit_address: The partner unit address of this entry.
+ * @partition_ID: The partner partition ID of this entry.
+ * @location_code: The converged location code of this entry + 1 char for the
+ *	null-term.
+ *
+ * This structure outlines the format that partner info is presented to a caller
+ * of the hvcs partner info fetching functions.  These are strung together into
+ * a list using linux kernel lists.
+ */
+struct hvcs_partner_info {
+	struct list_head node;
+	uint32_t unit_address;
+	uint32_t partition_ID;
+	char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
+};
+
+extern int hvcs_free_partner_info(struct list_head *head);
+extern int hvcs_get_partner_info(uint32_t unit_address,
+		struct list_head *head, unsigned long *pi_buff);
+extern int hvcs_register_connection(uint32_t unit_address,
+		uint32_t p_partition_ID, uint32_t p_unit_address);
+extern int hvcs_free_connection(uint32_t unit_address);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCSERVER_H */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
new file mode 100644
index 000000000000..f75a5fc64d2e
--- /dev/null
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_HW_IRQ_H
+#define _ASM_POWERPC_HW_IRQ_H
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+
+extern void timer_interrupt(struct pt_regs *);
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+
+static inline unsigned long local_get_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__("lbz %0,%1(13)"
+	: "=r" (flags)
+	: "i" (offsetof(struct paca_struct, soft_enabled)));
+
+	return flags;
+}
+
+static inline unsigned long raw_local_irq_disable(void)
+{
+	unsigned long flags, zero;
+
+	__asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
+	: "=r" (flags), "=&r" (zero)
+	: "i" (offsetof(struct paca_struct, soft_enabled))
+	: "memory");
+
+	return flags;
+}
+
+extern void raw_local_irq_restore(unsigned long);
+extern void iseries_handle_interrupts(void);
+
+#define raw_local_irq_enable()		raw_local_irq_restore(1)
+#define raw_local_save_flags(flags)	((flags) = local_get_flags())
+#define raw_local_irq_save(flags)	((flags) = raw_local_irq_disable())
+
+#define raw_irqs_disabled()		(local_get_flags() == 0)
+#define raw_irqs_disabled_flags(flags)	((flags) == 0)
+
+#define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
+#define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+
+#define  hard_irq_disable()			\
+	do {					\
+		__hard_irq_disable();		\
+		get_paca()->soft_enabled = 0;	\
+		get_paca()->hard_enabled = 0;	\
+	} while(0)
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return flags == 0;
+}
+
+#else
+
+#if defined(CONFIG_BOOKE)
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#else
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	mtmsr(flags)
+#endif
+
+static inline void local_irq_disable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+}
+
+static inline void local_irq_enable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 1": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr | MSR_EE);
+#endif
+}
+
+static inline void local_irq_save_ptr(unsigned long *flags)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	*flags = msr;
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+	__asm__ __volatile__("": : :"memory");
+}
+
+#define local_save_flags(flags)	((flags) = mfmsr())
+#define local_irq_save(flags)	local_irq_save_ptr(&flags)
+#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+
+#define hard_irq_enable()	local_irq_enable()
+#define hard_irq_disable()	local_irq_disable()
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & MSR_EE) == 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * interrupt-retrigger: should we handle this via lost interrupts and IPIs
+ * or should we not care like we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h
new file mode 100644
index 000000000000..1ad4eed07fbe
--- /dev/null
+++ b/arch/powerpc/include/asm/hydra.h
@@ -0,0 +1,102 @@
+/*
+ *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	Macintosh Technology in the Common Hardware Reference Platform
+ *	Apple Computer, Inc.
+ *
+ *	© Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ *  It's available online from http://chrp.apple.com/MacTech.pdf.
+ *  You can obtain paper copies of this book from computer bookstores or by
+ *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+    /* DBDMA Controller Register Space */
+    char Pad1[0x30];
+    u_int CachePD;
+    u_int IDs;
+    u_int Feature_Control;
+    char Pad2[0x7fc4];
+    /* DBDMA Channel Register Space */
+    char SCSI_DMA[0x100];
+    char Pad3[0x300];
+    char SCCA_Tx_DMA[0x100];
+    char SCCA_Rx_DMA[0x100];
+    char SCCB_Tx_DMA[0x100];
+    char SCCB_Rx_DMA[0x100];
+    char Pad4[0x7800];
+    /* Device Register Space */
+    char SCSI[0x1000];
+    char ADB[0x1000];
+    char SCC_Legacy[0x1000];
+    char SCC[0x1000];
+    char Pad9[0x2000];
+    char VIA[0x2000];
+    char Pad10[0x28000];
+    char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra __iomem *Hydra;
+
+
+    /*
+     *  Feature Control Register
+     */
+
+#define HYDRA_FC_SCC_CELL_EN	0x00000001	/* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN	0x00000002	/* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE	0x00000004	/* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE	0x00000008	/* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS	0x00000010	/* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC	0x00000020	/* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE	0x00000040	/* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK	0x00000080	/* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER	0x00000100	/* OpenPIC Master Mode */
+
+
+    /*
+     *  OpenPIC Interrupt Sources
+     */
+
+#define HYDRA_INT_SIO		0
+#define HYDRA_INT_SCSI_DMA	1
+#define HYDRA_INT_SCCA_TX_DMA	2
+#define HYDRA_INT_SCCA_RX_DMA	3
+#define HYDRA_INT_SCCB_TX_DMA	4
+#define HYDRA_INT_SCCB_RX_DMA	5
+#define HYDRA_INT_SCSI		6
+#define HYDRA_INT_SCCA		7
+#define HYDRA_INT_SCCB		8
+#define HYDRA_INT_VIA		9
+#define HYDRA_INT_ADB		10
+#define HYDRA_INT_ADB_NMI	11
+#define HYDRA_INT_EXT1		12	/* PCI IRQW */
+#define HYDRA_INT_EXT2		13	/* PCI IRQX */
+#define HYDRA_INT_EXT3		14	/* PCI IRQY */
+#define HYDRA_INT_EXT4		15	/* PCI IRQZ */
+#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6		17	/* IDE Secondary */
+#define HYDRA_INT_EXT7		18	/* Power Off Request */
+#define HYDRA_INT_SPARE		19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
new file mode 100644
index 000000000000..db1362f8c603
--- /dev/null
+++ b/arch/powerpc/include/asm/i8259.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_POWERPC_I8259_H
+#define _ASM_POWERPC_I8259_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+
+#ifdef CONFIG_PPC_MERGE
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(void);
+extern struct irq_host *i8259_get_host(void);
+#else
+extern void i8259_init(unsigned long intack_addr, int offset);
+extern int i8259_irq(void);
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_I8259_H */
diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h
new file mode 100644
index 000000000000..1a9d9aea21fa
--- /dev/null
+++ b/arch/powerpc/include/asm/ibmebus.h
@@ -0,0 +1,60 @@
+/*
+ * IBM PowerPC eBus Infrastructure Support.
+ *
+ * Copyright (c) 2005 IBM Corporation
+ *  Joachim Fenkes <fenkes@de.ibm.com>
+ *  Heiko J Schick <schickhj@de.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_EBUS_H
+#define _ASM_EBUS_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+extern struct bus_type ibmebus_bus_type;
+
+int ibmebus_register_driver(struct of_platform_driver *drv);
+void ibmebus_unregister_driver(struct of_platform_driver *drv);
+
+int ibmebus_request_irq(u32 ist, irq_handler_t handler,
+			unsigned long irq_flags, const char *devname,
+			void *dev_id);
+void ibmebus_free_irq(u32 ist, void *dev_id);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IBMEBUS_H */
diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
new file mode 100644
index 000000000000..1aaf27be8741
--- /dev/null
+++ b/arch/powerpc/include/asm/ide.h
@@ -0,0 +1,59 @@
+/*
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ *  This file contains the powerpc architecture specific IDE code.
+ */
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef __powerpc64__
+#include <linux/sched.h>
+#include <asm/mpc8xx.h>
+#endif
+#include <asm/io.h>
+
+#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
+
+#ifndef  __powerpc64__
+#include <linux/hdreg.h>
+#include <linux/ioport.h>
+
+/* FIXME: use ide_platform host driver */
+static __inline__ int ide_default_irq(unsigned long base)
+{
+#ifdef CONFIG_PPLUS
+	switch (base) {
+	case 0x1f0:	return 14;
+	case 0x170:	return 15;
+	}
+#endif
+	return 0;
+}
+
+/* FIXME: use ide_platform host driver */
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+#ifdef CONFIG_PPLUS
+	switch (index) {
+	case 0:		return 0x1f0;
+	case 1:		return 0x170;
+	}
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
+#define IDE_ARCH_ACK_INTR  1
+#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
+#endif
+
+#endif /* __powerpc64__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
new file mode 100644
index 000000000000..0f165e59c326
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -0,0 +1,156 @@
+/**
+ * MPC86xx Internal Memory Map
+ *
+ * Authors: Jeff Brown
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2004,2007 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This header file defines structures for various 86xx SOC devices that are
+ * used by multiple source files.
+ */
+
+#ifndef __ASM_POWERPC_IMMAP_86XX_H__
+#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifdef __KERNEL__
+
+/* Global Utility Registers */
+struct ccsr_guts {
+	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	u8	res1[0x20 - 0x14];
+	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u8	res2[0x30 - 0x24];
+	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u8	res3[0x40 - 0x34];
+	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u8	res4[0x50 - 0x44];
+	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u8	res5[0x60 - 0x54];
+	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+	u8	res6[0x70 - 0x64];
+	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u8	res7[0x80 - 0x78];
+	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	u8	res8[0x90 - 0x84];
+	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
+	u8	res9[0xA0 - 0x98];
+	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
+	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u8	res10[0xB0 - 0xA8];
+	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u8	res11[0xC0 - 0xB4];
+	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
+	u8	res12[0x800 - 0xC4];
+	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u8	res13[0x900 - 0x804];
+	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u8	res14[0x908 - 0x904];
+	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u8	res15[0x914 - 0x90C];
+	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u8	res16[0xB20 - 0x918];
+	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u8	res17[0xE00 - 0xB2C];
+	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u8	res18[0xE10 - 0xE04];
+	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u8	res19[0xE20 - 0xE14];
+	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	u8	res20[0xF04 - 0xE24];
+	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u8	res21[0xF40 - 0xF0C];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
+} __attribute__ ((packed));
+
+#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
+#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
+
+/*
+ * Set the DMACR register in the GUTS
+ *
+ * The DMACR register determines the source of initiated transfers for each
+ * channel on each DMA controller.  Rather than have a bunch of repetitive
+ * macros for the bit patterns, we just have a function that calculates
+ * them.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
+ */
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int device)
+{
+	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
+
+	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
+}
+
+#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
+#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
+#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
+#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
+#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
+#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
+#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
+#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
+#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
+#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
+
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3.  Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int value)
+{
+	if ((ch == 0) || (ch == 3)) {
+		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+	}
+}
+
+#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
+#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
+#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
+	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
+#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
+#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
+#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
+#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
+#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
+
+#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
new file mode 100644
index 000000000000..4080bab0468c
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -0,0 +1,650 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them.  This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560).
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+#include <linux/types.h>
+
+/* System configuration registers.
+*/
+typedef	struct sys_82xx_conf {
+	u32	sc_siumcr;
+	u32	sc_sypcr;
+	u8	res1[6];
+	u16	sc_swsr;
+	u8	res2[20];
+	u32	sc_bcr;
+	u8	sc_ppc_acr;
+	u8	res3[3];
+	u32	sc_ppc_alrh;
+	u32	sc_ppc_alrl;
+	u8	sc_lcl_acr;
+	u8	res4[3];
+	u32	sc_lcl_alrh;
+	u32	sc_lcl_alrl;
+	u32	sc_tescr1;
+	u32	sc_tescr2;
+	u32	sc_ltescr1;
+	u32	sc_ltescr2;
+	u32	sc_pdtea;
+	u8	sc_pdtem;
+	u8	res5[3];
+	u32	sc_ldtea;
+	u8	sc_ldtem;
+	u8	res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef	struct sys_85xx_conf {
+	u32	sc_cear;
+	u16	sc_ceer;
+	u16	sc_cemr;
+	u8	res1[70];
+	u32	sc_smaer;
+	u8	res2[4];
+	u32	sc_smevr;
+	u32	sc_smctr;
+	u32	sc_lmaer;
+	u8	res3[4];
+	u32	sc_lmevr;
+	u32	sc_lmctr;
+	u8	res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+	sysconf_82xx_cpm2_t	siu_82xx;
+	sysconf_85xx_cpm2_t	siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	u32	memc_br0;
+	u32	memc_or0;
+	u32	memc_br1;
+	u32	memc_or1;
+	u32	memc_br2;
+	u32	memc_or2;
+	u32	memc_br3;
+	u32	memc_or3;
+	u32	memc_br4;
+	u32	memc_or4;
+	u32	memc_br5;
+	u32	memc_or5;
+	u32	memc_br6;
+	u32	memc_or6;
+	u32	memc_br7;
+	u32	memc_or7;
+	u32	memc_br8;
+	u32	memc_or8;
+	u32	memc_br9;
+	u32	memc_or9;
+	u32	memc_br10;
+	u32	memc_or10;
+	u32	memc_br11;
+	u32	memc_or11;
+	u8	res1[8];
+	u32	memc_mar;
+	u8	res2[4];
+	u32	memc_mamr;
+	u32	memc_mbmr;
+	u32	memc_mcmr;
+	u8	res3[8];
+	u16	memc_mptpr;
+	u8	res4[2];
+	u32	memc_mdr;
+	u8	res5[4];
+	u32	memc_psdmr;
+	u32	memc_lsdmr;
+	u8	memc_purt;
+	u8	res6[3];
+	u8	memc_psrt;
+	u8	res7[3];
+	u8	memc_lurt;
+	u8	res8[3];
+	u8	memc_lsrt;
+	u8	res9[3];
+	u32	memc_immr;
+	u32	memc_pcibr0;
+	u32	memc_pcibr1;
+	u8	res10[16];
+	u32	memc_pcimsk0;
+	u32	memc_pcimsk1;
+	u8	res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	u8	res1[32];
+	u16	sit_tmcntsc;
+	u8	res2[2];
+	u32	sit_tmcnt;
+	u8	res3[4];
+	u32	sit_tmcntal;
+	u8	res4[16];
+	u16	sit_piscr;
+	u8	res5[2];
+	u32	sit_pitc;
+	u32	sit_pitr;
+	u8      res6[94];
+	u8	res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK		((u16)0xff00)
+#define PISCR_PS		((u16)0x0080)
+#define PISCR_PIE		((u16)0x0004)
+#define PISCR_PTF		((u16)0x0002)
+#define PISCR_PTE		((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+	u32	pci_omisr;
+	u32	pci_omimr;
+	u8	res1[8];
+	u32	pci_ifqpr;
+	u32	pci_ofqpr;
+	u8	res2[8];
+	u32	pci_imr0;
+	u32	pci_imr1;
+	u32	pci_omr0;
+	u32	pci_omr1;
+	u32	pci_odr;
+	u8	res3[4];
+	u32	pci_idr;
+	u8	res4[20];
+	u32	pci_imisr;
+	u32	pci_imimr;
+	u8	res5[24];
+	u32	pci_ifhpr;
+	u8	res6[4];
+	u32	pci_iftpr;
+	u8	res7[4];
+	u32	pci_iphpr;
+	u8	res8[4];
+	u32	pci_iptpr;
+	u8	res9[4];
+	u32	pci_ofhpr;
+	u8	res10[4];
+	u32	pci_oftpr;
+	u8	res11[4];
+	u32	pci_ophpr;
+	u8	res12[4];
+	u32	pci_optpr;
+	u8	res13[8];
+	u32	pci_mucr;
+	u8	res14[8];
+	u32	pci_qbar;
+	u8	res15[12];
+	u32	pci_dmamr0;
+	u32	pci_dmasr0;
+	u32	pci_dmacdar0;
+	u8	res16[4];
+	u32	pci_dmasar0;
+	u8	res17[4];
+	u32	pci_dmadar0;
+	u8	res18[4];
+	u32	pci_dmabcr0;
+	u32	pci_dmandar0;
+	u8	res19[86];
+	u32	pci_dmamr1;
+	u32	pci_dmasr1;
+	u32	pci_dmacdar1;
+	u8	res20[4];
+	u32	pci_dmasar1;
+	u8	res21[4];
+	u32	pci_dmadar1;
+	u8	res22[4];
+	u32	pci_dmabcr1;
+	u32	pci_dmandar1;
+	u8	res23[88];
+	u32	pci_dmamr2;
+	u32	pci_dmasr2;
+	u32	pci_dmacdar2;
+	u8	res24[4];
+	u32	pci_dmasar2;
+	u8	res25[4];
+	u32	pci_dmadar2;
+	u8	res26[4];
+	u32	pci_dmabcr2;
+	u32	pci_dmandar2;
+	u8	res27[88];
+	u32	pci_dmamr3;
+	u32	pci_dmasr3;
+	u32	pci_dmacdar3;
+	u8	res28[4];
+	u32	pci_dmasar3;
+	u8	res29[4];
+	u32	pci_dmadar3;
+	u8	res30[4];
+	u32	pci_dmabcr3;
+	u32	pci_dmandar3;
+	u8	res31[344];
+	u32	pci_potar0;
+	u8	res32[4];
+	u32	pci_pobar0;
+	u8	res33[4];
+	u32	pci_pocmr0;
+	u8	res34[4];
+	u32	pci_potar1;
+	u8	res35[4];
+	u32	pci_pobar1;
+	u8	res36[4];
+	u32	pci_pocmr1;
+	u8	res37[4];
+	u32	pci_potar2;
+	u8	res38[4];
+	u32	pci_pobar2;
+	u8	res39[4];
+	u32	pci_pocmr2;
+	u8	res40[50];
+	u32	pci_ptcr;
+	u32	pci_gpcr;
+	u32	pci_gcr;
+	u32	pci_esr;
+	u32	pci_emr;
+	u32	pci_ecr;
+	u32	pci_eacr;
+	u8	res41[4];
+	u32	pci_edcr;
+	u8	res42[4];
+	u32	pci_eccr;
+	u8	res43[44];
+	u32	pci_pitar1;
+	u8	res44[4];
+	u32	pci_pibar1;
+	u8	res45[4];
+	u32	pci_picmr1;
+	u8	res46[4];
+	u32	pci_pitar0;
+	u8	res47[4];
+	u32	pci_pibar0;
+	u8	res48[4];
+	u32	pci_picmr0;
+	u8	res49[4];
+	u32	pci_cfg_addr;
+	u32	pci_cfg_data;
+	u32	pci_int_ack;
+	u8	res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+	u16	ic_sicr;
+	u8	res1[2];
+	u32	ic_sivec;
+	u32	ic_sipnrh;
+	u32	ic_sipnrl;
+	u32	ic_siprr;
+	u32	ic_scprrh;
+	u32	ic_scprrl;
+	u32	ic_simrh;
+	u32	ic_simrl;
+	u32	ic_siexr;
+	u8	res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	u32	car_sccr;
+	u8	res1[4];
+	u32	car_scmr;
+	u8	res2[4];
+	u32	car_rsr;
+	u32	car_rmr;
+	u8	res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+	u32	iop_pdira;
+	u32	iop_ppara;
+	u32	iop_psora;
+	u32	iop_podra;
+	u32	iop_pdata;
+	u8	res1[12];
+	u32	iop_pdirb;
+	u32	iop_pparb;
+	u32	iop_psorb;
+	u32	iop_podrb;
+	u32	iop_pdatb;
+	u8	res2[12];
+	u32	iop_pdirc;
+	u32	iop_pparc;
+	u32	iop_psorc;
+	u32	iop_podrc;
+	u32	iop_pdatc;
+	u8	res3[12];
+	u32	iop_pdird;
+	u32	iop_ppard;
+	u32	iop_psord;
+	u32	iop_podrd;
+	u32	iop_pdatd;
+	u8	res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	u8	cpmt_tgcr1;
+	u8	res1[3];
+	u8	cpmt_tgcr2;
+	u8	res2[11];
+	u16	cpmt_tmr1;
+	u16	cpmt_tmr2;
+	u16	cpmt_trr1;
+	u16	cpmt_trr2;
+	u16	cpmt_tcr1;
+	u16	cpmt_tcr2;
+	u16	cpmt_tcn1;
+	u16	cpmt_tcn2;
+	u16	cpmt_tmr3;
+	u16	cpmt_tmr4;
+	u16	cpmt_trr3;
+	u16	cpmt_trr4;
+	u16	cpmt_tcr3;
+	u16	cpmt_tcr4;
+	u16	cpmt_tcn3;
+	u16	cpmt_tcn4;
+	u16	cpmt_ter1;
+	u16	cpmt_ter2;
+	u16	cpmt_ter3;
+	u16	cpmt_ter4;
+	u8	res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	u8	res0[24];
+	u8	sdma_sdsr;
+	u8	res1[3];
+	u8	sdma_sdmr;
+	u8	res2[3];
+	u8	sdma_idsr1;
+	u8	res3[3];
+	u8	sdma_idmr1;
+	u8	res4[3];
+	u8	sdma_idsr2;
+	u8	res5[3];
+	u8	sdma_idmr2;
+	u8	res6[3];
+	u8	sdma_idsr3;
+	u8	res7[3];
+	u8	sdma_idmr3;
+	u8	res8[3];
+	u8	sdma_idsr4;
+	u8	res9[3];
+	u8	sdma_idmr4;
+	u8	res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+	u32	fcc_gfmr;
+	u32	fcc_fpsmr;
+	u16	fcc_ftodr;
+	u8	res1[2];
+	u16	fcc_fdsr;
+	u8	res2[2];
+	u16	fcc_fcce;
+	u8	res3[2];
+	u16	fcc_fccm;
+	u8	res4[2];
+	u8	fcc_fccs;
+	u8	res5[3];
+	u8	fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+	u32	fcc_firper;
+	u32	fcc_firer;
+	u32	fcc_firsr_hi;
+	u32	fcc_firsr_lo;
+	u8	fcc_gfemr;
+	u8	res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+	u16	tc_tcmode;
+	u16	tc_cdsmr;
+	u16	tc_tcer;
+	u16	tc_rcc;
+	u16	tc_tcmr;
+	u16	tc_fcc;
+	u16	tc_ccc;
+	u16	tc_icc;
+	u16	tc_tcc;
+	u16	tc_ecc;
+	u8	res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+	u8	i2c_i2mod;
+	u8	res1[3];
+	u8	i2c_i2add;
+	u8	res2[3];
+	u8	i2c_i2brg;
+	u8	res3[3];
+	u8	i2c_i2com;
+	u8	res4[3];
+	u8	i2c_i2cer;
+	u8	res5[3];
+	u8	i2c_i2cmr;
+	u8	res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc {		/* Serial communication channels */
+	u32	scc_gsmrl;
+	u32	scc_gsmrh;
+	u16	scc_psmr;
+	u8	res1[2];
+	u16	scc_todr;
+	u16	scc_dsr;
+	u16	scc_scce;
+	u8	res2[2];
+	u16	scc_sccm;
+	u8	res3;
+	u8	scc_sccs;
+	u8	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	u8	res1[2];
+	u16	smc_smcmr;
+	u8	res2[2];
+	u8	smc_smce;
+	u8	res3[3];
+	u8	smc_smcm;
+	u8	res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+	u16	spi_spmode;
+	u8	res1[4];
+	u8	spi_spie;
+	u8	res2[3];
+	u8	spi_spim;
+	u8	res3[2];
+	u8	spi_spcom;
+	u8	res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+	u8	cmx_si1cr;
+	u8	res1;
+	u8	cmx_si2cr;
+	u8	res2;
+	u32	cmx_fcr;
+	u32	cmx_scr;
+	u8	cmx_smr;
+	u8	res3;
+	u16	cmx_uar;
+	u8	res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+	u16	si_amr;
+	u16	si_bmr;
+	u16	si_cmr;
+	u16	si_dmr;
+	u8	si_gmr;
+	u8	res1;
+	u8	si_cmdr;
+	u8	res2;
+	u8	si_str;
+	u8	res3;
+	u16	si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+	u16	mcc_mcce;
+	u8	res1[2];
+	u16	mcc_mccm;
+	u8	res2[2];
+	u8	mcc_mccf;
+	u8	res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+	u32	cp_cpcr;
+	u32	cp_rccr;
+	u8	res1[14];
+	u16	cp_rter;
+	u8	res2[2];
+	u16	cp_rtmr;
+	u16	cp_rtscr;
+	u8	res3[2];
+	u32	cp_rtsr;
+	u8	res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	u16	usb_usep1;
+	u16	usb_usep2;
+	u16	usb_usep3;
+	u16	usb_usep4;
+	u8	res2[4];
+	u16	usb_usber;
+	u8	res3[2];
+	u16	usb_usbmr;
+	u8	usb_usbs;
+	u8	res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+	/* Some references are into the unique and known dpram spaces,
+	 * others are from the generic base.
+	 */
+#define im_dprambase	im_dpram1
+	u8		im_dpram1[16*1024];
+	u8		res1[16*1024];
+	u8		im_dpram2[4*1024];
+	u8		res2[8*1024];
+	u8		im_dpram3[4*1024];
+	u8		res3[16*1024];
+
+	sysconf_cpm2_t	im_siu_conf;	/* SIU Configuration */
+	memctl_cpm2_t	im_memctl;	/* Memory Controller */
+	sit_cpm2_t	im_sit;		/* System Integration Timers */
+	pci_cpm2_t	im_pci;		/* PCI Controller */
+	intctl_cpm2_t	im_intctl;	/* Interrupt Controller */
+	car_cpm2_t	im_clkrst;	/* Clocks and reset */
+	iop_cpm2_t	im_ioport;	/* IO Port control/status */
+	cpmtimer_cpm2_t	im_cpmtimer;	/* CPM timers */
+	sdma_cpm2_t	im_sdma;	/* SDMA control/status */
+
+	fcc_t		im_fcc[3];	/* Three FCCs */
+	u8		res4z[32];
+	fcc_c_t		im_fcc_c[3];	/* Continued FCCs */
+
+	u8		res4[32];
+
+	tclayer_t	im_tclayer[8];	/* Eight TCLayers */
+	u16		tc_tcgsr;
+	u16		tc_tcger;
+
+	/* First set of baud rate generators.
+	*/
+	u8		res[236];
+	u32		im_brgc5;
+	u32		im_brgc6;
+	u32		im_brgc7;
+	u32		im_brgc8;
+
+	u8		res5[608];
+
+	i2c_cpm2_t	im_i2c;		/* I2C control/status */
+	cpm_cpm2_t	im_cpm;		/* Communication processor */
+
+	/* Second set of baud rate generators.
+	*/
+	u32		im_brgc1;
+	u32		im_brgc2;
+	u32		im_brgc3;
+	u32		im_brgc4;
+
+	scc_t		im_scc[4];	/* Four SCCs */
+	smc_t		im_smc[2];	/* Couple of SMCs */
+	spictl_cpm2_t	im_spi;		/* A SPI */
+	cpmux_t		im_cpmux;	/* CPM clock route mux */
+	siramctl_t	im_siramctl1;	/* First SI RAM Control */
+	mcc_t		im_mcc1;	/* First MCC */
+	siramctl_t	im_siramctl2;	/* Second SI RAM Control */
+	mcc_t		im_mcc2;	/* Second MCC */
+	usb_cpm2_t	im_usb;		/* USB Controller */
+
+	u8		res6[1153];
+
+	u16		im_si1txram[256];
+	u8		res7[512];
+	u16		im_si1rxram[256];
+	u8		res8[512];
+	u16		im_si2txram[256];
+	u8		res9[512];
+	u16		im_si2rxram[256];
+	u8		res10[512];
+	u8		res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t __iomem *cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
new file mode 100644
index 000000000000..3c2fced3ac22
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -0,0 +1,483 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+	__be32	iadd;		/* I-RAM Address Register */
+	__be32	idata;		/* I-RAM Data Register */
+	u8	res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+	__be32	qicr;
+	__be32	qivec;
+	__be32	qripnr;
+	__be32	qipnr;
+	__be32	qipxcc;
+	__be32	qipycc;
+	__be32	qipwcc;
+	__be32	qipzcc;
+	__be32	qimr;
+	__be32	qrimr;
+	__be32	qicnr;
+	u8	res0[0x4];
+	__be32	qiprta;
+	__be32	qiprtb;
+	u8	res1[0x4];
+	__be32	qricr;
+	u8	res2[0x20];
+	__be32	qhivec;
+	u8	res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+	__be32	cecr;		/* QE command register */
+	__be32	ceccr;		/* QE controller configuration register */
+	__be32	cecdr;		/* QE command data register */
+	u8	res0[0xA];
+	__be16	ceter;		/* QE timer event register */
+	u8	res1[0x2];
+	__be16	cetmr;		/* QE timers mask register */
+	__be32	cetscr;		/* QE time-stamp timer control register */
+	__be32	cetsr1;		/* QE time-stamp register 1 */
+	__be32	cetsr2;		/* QE time-stamp register 2 */
+	u8	res2[0x8];
+	__be32	cevter;		/* QE virtual tasks event register */
+	__be32	cevtmr;		/* QE virtual tasks mask register */
+	__be16	cercr;		/* QE RAM control register */
+	u8	res3[0x2];
+	u8	res4[0x24];
+	__be16	ceexe1;		/* QE external request 1 event register */
+	u8	res5[0x2];
+	__be16	ceexm1;		/* QE external request 1 mask register */
+	u8	res6[0x2];
+	__be16	ceexe2;		/* QE external request 2 event register */
+	u8	res7[0x2];
+	__be16	ceexm2;		/* QE external request 2 mask register */
+	u8	res8[0x2];
+	__be16	ceexe3;		/* QE external request 3 event register */
+	u8	res9[0x2];
+	__be16	ceexm3;		/* QE external request 3 mask register */
+	u8	res10[0x2];
+	__be16	ceexe4;		/* QE external request 4 event register */
+	u8	res11[0x2];
+	__be16	ceexm4;		/* QE external request 4 mask register */
+	u8	res12[0x3A];
+	__be32	ceurnr;		/* QE microcode revision number register */
+	u8	res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+	__be32	cmxgcr;		/* CMX general clock route register */
+	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
+	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
+	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
+	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
+	__be32	cmxupcr;	/* CMX UPC clock route register */
+	u8	res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+	__be32	brgc[16];	/* BRG configuration registers */
+	u8	res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+	u8	res0[0x20];
+	__be32	spmode;		/* SPI mode register */
+	u8	res1[0x2];
+	u8	spie;		/* SPI event register */
+	u8	res2[0x1];
+	u8	res3[0x2];
+	u8	spim;		/* SPI mask register */
+	u8	res4[0x1];
+	u8	res5[0x1];
+	u8	spcom;		/* SPI command register */
+	u8	res6[0x2];
+	__be32	spitd;		/* SPI transmit data register (cpu mode) */
+	__be32	spird;		/* SPI receive data register (cpu mode) */
+	u8	res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+	__be16	siamr1;		/* SI1 TDMA mode register */
+	__be16	sibmr1;		/* SI1 TDMB mode register */
+	__be16	sicmr1;		/* SI1 TDMC mode register */
+	__be16	sidmr1;		/* SI1 TDMD mode register */
+	u8	siglmr1_h;	/* SI1 global mode register high */
+	u8	res0[0x1];
+	u8	sicmdr1_h;	/* SI1 command register high */
+	u8	res2[0x1];
+	u8	sistr1_h;	/* SI1 status register high */
+	u8	res3[0x1];
+	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
+	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
+	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
+	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
+	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
+	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
+	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
+	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
+	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
+	u8	res4[0x8];
+	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
+	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
+	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
+	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
+	u8	res5[0x1];
+	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
+	u8	res6[0x1];
+	u8	sistr1_l;	/* SI1 status register low 8 bits */
+	u8	res7[0x1];
+	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
+	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
+	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
+	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
+	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
+	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
+	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
+	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
+	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
+	u8	res8[0x8];
+	__be32	siml1;		/* SI1 multiframe limit register */
+	u8	siedm1;		/* SI1 extended diagnostic mode register */
+	u8	res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+	u8 	tx[0x400];
+	u8	rx[0x400];
+	u8	res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep1;
+	__be16	usb_usep2;
+	__be16	usb_usep3;
+	__be16	usb_usep4;
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+	__be32	mcce;		/* MCC event register */
+	__be32	mccm;		/* MCC mask register */
+	__be32	mccf;		/* MCC configuration register */
+	__be32	merl;		/* MCC emergency request level register */
+	u8	res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+	__be32	gumr_l;		/* UCCx general mode register (low) */
+	__be32	gumr_h;		/* UCCx general mode register (high) */
+	__be16	upsmr;		/* UCCx protocol-specific mode register */
+	u8	res0[0x2];
+	__be16	utodr;		/* UCCx transmit on demand register */
+	__be16	udsr;		/* UCCx data synchronization register */
+	__be16	ucce;		/* UCCx event register */
+	u8	res1[0x2];
+	__be16	uccm;		/* UCCx mask register */
+	u8	res2[0x1];
+	u8	uccs;		/* UCCx status register */
+	u8	res3[0x24];
+	__be16	utpt;
+	u8	res4[0x52];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+	__be32	gumr;		/* UCCx general mode register */
+	__be32	upsmr;		/* UCCx protocol-specific mode register */
+	__be16	utodr;		/* UCCx transmit on demand register */
+	u8	res0[0x2];
+	__be16	udsr;		/* UCCx data synchronization register */
+	u8	res1[0x2];
+	__be32	ucce;		/* UCCx event register */
+	__be32	uccm;		/* UCCx mask register */
+	u8	uccs;		/* UCCx status register */
+	u8	res2[0x7];
+	__be32	urfb;		/* UCC receive FIFO base */
+	__be16	urfs;		/* UCC receive FIFO size */
+	u8	res3[0x2];
+	__be16	urfet;		/* UCC receive FIFO emergency threshold */
+	__be16	urfset;		/* UCC receive FIFO special emergency
+				   threshold */
+	__be32	utfb;		/* UCC transmit FIFO base */
+	__be16	utfs;		/* UCC transmit FIFO size */
+	u8	res4[0x2];
+	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
+	u8	res5[0x2];
+	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
+	u8	res6[0x2];
+	__be16	utpt;		/* UCC transmit polling timer */
+	u8	res7[0x2];
+	__be32	urtry;		/* UCC retry counter register */
+	u8	res8[0x4C];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+	union {
+		struct	ucc_slow slow;
+		struct	ucc_fast fast;
+		u8	res[0x200];	/* UCC blocks are 512 bytes each */
+	};
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+	__be32	upgcr;		/* UTOPIA/POS general configuration register */
+	__be32	uplpa;		/* UTOPIA/POS last PHY address */
+	__be32	uphec;		/* ATM HEC register */
+	__be32	upuc;		/* UTOPIA/POS UCC configuration */
+	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
+	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
+	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
+	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
+	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
+	u8	res0[0xC];
+	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
+	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
+	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
+	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
+	__be32	upde1;		/* UTOPIA/POS device 1 event */
+	__be32	upde2;		/* UTOPIA/POS device 2 event */
+	__be32	upde3;		/* UTOPIA/POS device 3 event */
+	__be32	upde4;		/* UTOPIA/POS device 4 event */
+	__be16	uprp1;
+	__be16	uprp2;
+	__be16	uprp3;
+	__be16	uprp4;
+	u8	res1[0x8];
+	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
+	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
+	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
+	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
+	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
+	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
+	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
+	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
+	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
+	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
+	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
+	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
+	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
+	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
+	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
+	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
+	__be32	uper1;		/* Device 1 port enable register */
+	__be32	uper2;		/* Device 2 port enable register */
+	__be32	uper3;		/* Device 3 port enable register */
+	__be32	uper4;		/* Device 4 port enable register */
+	u8	res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+	__be32	sdsr;		/* Serial DMA status register */
+	__be32	sdmr;		/* Serial DMA mode register */
+	__be32	sdtr1;		/* SDMA system bus threshold register */
+	__be32	sdtr2;		/* SDMA secondary bus threshold register */
+	__be32	sdhy1;		/* SDMA system bus hysteresis register */
+	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
+	__be32	sdta1;		/* SDMA system bus address register */
+	__be32	sdta2;		/* SDMA secondary bus address register */
+	__be32	sdtm1;		/* SDMA system bus MSNUM register */
+	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8	res0[0x10];
+	__be32	sdaqr;		/* SDMA address bus qualify register */
+	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
+	u8	res1[0x4];
+	__be32	sdebcr;		/* SDMA CAM entries base register */
+	u8	res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+	__be32	bpdcr;		/* Breakpoint debug command register */
+	__be32	bpdsr;		/* Breakpoint debug status register */
+	__be32	bpdmr;		/* Breakpoint debug mask register */
+	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
+	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
+	u8	res0[0x8];
+	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
+	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
+	u8	res1[0x8];
+	__be32	bprmir;		/* Breakpoint request mode immediate register */
+	__be32	bprmsr;		/* Breakpoint request mode serial register */
+	__be32	bpemr;		/* Breakpoint exit mode register */
+	u8	res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
+	u8 res0[64];
+	__be32 ibcr0;
+	__be32 ibs0;
+	__be32 ibcnr0;
+	u8 res1[4];
+	__be32 ibcr1;
+	__be32 ibs1;
+	__be32 ibcnr1;
+	__be32 npcr;
+	__be32 dbcr;
+	__be32 dbar;
+	__be32 dbamr;
+	__be32 dbsr;
+	__be32 dbcnr;
+	u8 res2[12];
+	__be32 dbdr_h;
+	__be32 dbdr_l;
+	__be32 dbdmr_h;
+	__be32 dbdmr_l;
+	__be32 bsr;
+	__be32 bor;
+	__be32 bior;
+	u8 res3[4];
+	__be32 iatr[4];
+	__be32 eccr;		/* Exception control configuration register */
+	__be32 eicr;
+	u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+	struct qe_iram		iram;		/* I-RAM */
+	struct qe_ic_regs	ic;		/* Interrupt Controller */
+	struct cp_qe		cp;		/* Communications Processor */
+	struct qe_mux		qmx;		/* QE Multiplexer */
+	struct qe_timers	qet;		/* QE Timers */
+	struct spi		spi[0x2];	/* spi */
+	struct mcc		mcc;		/* mcc */
+	struct qe_brg		brg;		/* brg */
+	struct usb_ctlr		usb;		/* USB */
+	struct si1		si1;		/* SI */
+	u8			res11[0x800];
+	struct sir		sir;		/* SI Routing Tables */
+	struct ucc		ucc1;		/* ucc1 */
+	struct ucc		ucc3;		/* ucc3 */
+	struct ucc		ucc5;		/* ucc5 */
+	struct ucc		ucc7;		/* ucc7 */
+	u8			res12[0x600];
+	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
+	struct ucc		ucc2;		/* ucc2 */
+	struct ucc		ucc4;		/* ucc4 */
+	struct ucc		ucc6;		/* ucc6 */
+	struct ucc		ucc8;		/* ucc8 */
+	u8			res13[0x600];
+	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
+	struct sdma		sdma;		/* SDMA */
+	struct dbg		dbg;		/* 0x104080 - 0x1040FF
+						   Debug Space */
+	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
+						   RISC Special Registers
+						   (Trap and Breakpoint) */
+	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
+	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
+	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
+	u8			muram[0xC000];	/* 0x110000 - 0x11C000
+						   Multi-user RAM */
+	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
+	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(void *address)
+{
+	if ( ((u32)address >= (u32)qe_immr) &&
+			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+		return (unsigned long)(address - (u32)qe_immr +
+				(u32)get_qe_base());
+	return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h
new file mode 100644
index 000000000000..44d7927aec69
--- /dev/null
+++ b/arch/powerpc/include/asm/io-defs.h
@@ -0,0 +1,60 @@
+/* This file is meant to be include multiple times by other headers */
+/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
+
+DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+
+#ifdef __powerpc64__
+DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+#endif /* __powerpc64__ */
+
+DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
+
+DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+
+DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+
+DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
+		 (a, c, n), mem, a)
+DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
+		 (d, s, n), mem, s)
+DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
+		 (d, s, n), mem, d)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
new file mode 100644
index 000000000000..77c7fa025e65
--- /dev/null
+++ b/arch/powerpc/include/asm/io.h
@@ -0,0 +1,787 @@
+#ifndef _ASM_POWERPC_IO_H
+#define _ASM_POWERPC_IO_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+#define I8042_DATA_REG	0x60
+#define FDC_BASE	0x3f0
+/* only relevant for PReP */
+#define _PIDXR		0x279
+#define _PNPWRP		0xa79
+#define PNPBIOS_BASE	0xf000
+
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/synch.h>
+#include <asm/delay.h>
+#include <asm/mmu.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+
+#define SIO_CONFIG_RA	0x398
+#define SIO_CONFIG_RD	0x399
+
+#define SLOW_DOWN_IO
+
+/* 32 bits uses slightly different variables for the various IO
+ * bases. Most of this file only uses _IO_BASE though which we
+ * define properly based on the platform
+ */
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET 0
+#elif defined(CONFIG_PPC32)
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#else
+#define _IO_BASE	pci_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	0
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
+#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+#endif
+
+/*
+ *
+ * Low level MMIO accessors
+ *
+ * This provides the non-bus specific accessors to MMIO. Those are PowerPC
+ * specific and thus shouldn't be used in generic code. The accessors
+ * provided here are:
+ *
+ *	in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
+ *	out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
+ *	_insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
+ *
+ * Those operate directly on a kernel virtual address. Note that the prototype
+ * for the out_* accessors has the arguments in opposite order from the usual
+ * linux PCI accessors. Unlike those, they take the address first and the value
+ * next.
+ *
+ * Note: I might drop the _ns suffix on the stream operations soon as it is
+ * simply normal for stream operations to not swap in the first place.
+ *
+ */
+
+#ifdef CONFIG_PPC64
+#define IO_SET_SYNC_FLAG()	do { local_paca->io_sync = 1; } while(0)
+#else
+#define IO_SET_SYNC_FLAG()
+#endif
+
+/* gcc 4.0 and older doesn't have 'Z' constraint */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "r" (addr), "m" (*addr) : "memory");	\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,0,%2"			\
+		: "=m" (*addr) : "r" (val), "r" (addr) : "memory");	\
+	IO_SET_SYNC_FLAG();						\
+}
+#else /* newer gcc */
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "Z" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
+		: "=Z" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+#endif
+
+#define DEF_MMIO_IN_BE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
+		: "=r" (ret) : "m" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_BE(name, size, insn)				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
+		: "=m" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+
+
+DEF_MMIO_IN_BE(in_8,     8, lbz);
+DEF_MMIO_IN_BE(in_be16, 16, lhz);
+DEF_MMIO_IN_BE(in_be32, 32, lwz);
+DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
+DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
+
+DEF_MMIO_OUT_BE(out_8,     8, stb);
+DEF_MMIO_OUT_BE(out_be16, 16, sth);
+DEF_MMIO_OUT_BE(out_be32, 32, stw);
+DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
+DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
+
+#ifdef __powerpc64__
+DEF_MMIO_OUT_BE(out_be64, 64, std);
+DEF_MMIO_IN_BE(in_be64, 64, ld);
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static inline u64 in_le64(const volatile u64 __iomem *addr)
+{
+	return swab64(in_be64(addr));
+}
+
+static inline void out_le64(volatile u64 __iomem *addr, u64 val)
+{
+	out_be64(addr, swab64(val));
+}
+#endif /* __powerpc64__ */
+
+/*
+ * Low level IO stream instructions are defined out of line for now
+ */
+extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
+extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
+extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
+extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
+extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
+extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
+
+/* The _ns naming is historical and will be removed. For now, just #define
+ * the non _ns equivalent names
+ */
+#define _insw	_insw_ns
+#define _insl	_insl_ns
+#define _outsw	_outsw_ns
+#define _outsl	_outsl_ns
+
+
+/*
+ * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
+ */
+
+extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
+extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
+			   unsigned long n);
+extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
+			 unsigned long n);
+
+/*
+ *
+ * PCI and standard ISA accessors
+ *
+ * Those are globally defined linux accessors for devices on PCI or ISA
+ * busses. They follow the Linux defined semantics. The current implementation
+ * for PowerPC is as close as possible to the x86 version of these, and thus
+ * provides fairly heavy weight barriers for the non-raw versions
+ *
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
+ * allowing the platform to provide its own implementation of some or all
+ * of the accessors.
+ */
+
+/*
+ * Include the EEH definitions when EEH is enabled only so they don't get
+ * in the way when building for 32 bits
+ */
+#ifdef CONFIG_EEH
+#include <asm/eeh.h>
+#endif
+
+/* Shortcut to the MMIO argument pointer */
+#define PCI_IO_ADDR	volatile void __iomem *
+
+/* Indirect IO address tokens:
+ *
+ * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
+ * on all IOs. (Note that this is all 64 bits only for now)
+ *
+ * To help platforms who may need to differenciate MMIO addresses in
+ * their hooks, a bitfield is reserved for use by the platform near the
+ * top of MMIO addresses (not PIO, those have to cope the hard way).
+ *
+ * This bit field is 12 bits and is at the top of the IO virtual
+ * addresses PCI_IO_INDIRECT_TOKEN_MASK.
+ *
+ * The kernel virtual space is thus:
+ *
+ *  0xD000000000000000		: vmalloc
+ *  0xD000080000000000		: PCI PHB IO space
+ *  0xD000080080000000		: ioremap
+ *  0xD0000fffffffffff		: end of ioremap region
+ *
+ * Since the top 4 bits are reserved as the region ID, we use thus
+ * the next 12 bits and keep 4 bits available for the future if the
+ * virtual address space is ever to be extended.
+ *
+ * The direct IO mapping operations will then mask off those bits
+ * before doing the actual access, though that only happen when
+ * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * mechanism
+ */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
+#define PCI_IO_IND_TOKEN_SHIFT	48
+#define PCI_FIX_ADDR(addr)						\
+	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
+#define PCI_GET_ADDR_TOKEN(addr)					\
+	(((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> 		\
+		PCI_IO_IND_TOKEN_SHIFT)
+#define PCI_SET_ADDR_TOKEN(addr, token) 				\
+do {									\
+	unsigned long __a = (unsigned long)(addr);			\
+	__a &= ~PCI_IO_IND_TOKEN_MASK;					\
+	__a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;	\
+	(addr) = (void __iomem *)__a;					\
+} while(0)
+#else
+#define PCI_FIX_ADDR(addr) (addr)
+#endif
+
+
+/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
+}
+
+#ifdef __powerpc64__
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
+}
+#endif /* __powerpc64__ */
+
+/*
+ *
+ * PCI PIO and MMIO accessors.
+ *
+ *
+ * On 32 bits, PIO operations have a recovery mechanism in case they trigger
+ * machine checks (which they occasionally do when probing non existing
+ * IO ports on some platforms, like PowerMac and 8xx).
+ * I always found it to be of dubious reliability and I am tempted to get
+ * rid of it one of these days. So if you think it's important to keep it,
+ * please voice up asap. We never had it for 64 bits and I do not intend
+ * to port it over
+ */
+
+#ifdef CONFIG_PPC32
+
+#define __do_in_asm(name, op)				\
+static inline unsigned int name(unsigned int port)	\
+{							\
+	unsigned int x;					\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:"	op "	%0,0,%1\n"		\
+		"1:	twi	0,%0,0\n"		\
+		"2:	isync\n"			\
+		"3:	nop\n"				\
+		"4:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"5:	li	%0,-1\n"		\
+		"	b	4b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,5b\n"		\
+		"	.long	1b,5b\n"		\
+		"	.long	2b,5b\n"		\
+		"	.long	3b,5b\n"		\
+		".previous"				\
+		: "=&r" (x)				\
+		: "r" (port + _IO_BASE)			\
+		: "memory");  				\
+	return x;					\
+}
+
+#define __do_out_asm(name, op)				\
+static inline void name(unsigned int val, unsigned int port) \
+{							\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:" op " %0,0,%1\n"			\
+		"1:	sync\n"				\
+		"2:\n"					\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,2b\n"		\
+		"	.long	1b,2b\n"		\
+		".previous"				\
+		: : "r" (val), "r" (port + _IO_BASE)	\
+		: "memory");   	   	   		\
+}
+
+__do_in_asm(_rec_inb, "lbzx")
+__do_in_asm(_rec_inw, "lhbrx")
+__do_in_asm(_rec_inl, "lwbrx")
+__do_out_asm(_rec_outb, "stbx")
+__do_out_asm(_rec_outw, "sthbrx")
+__do_out_asm(_rec_outl, "stwbrx")
+
+#endif /* CONFIG_PPC32 */
+
+/* The "__do_*" operations below provide the actual "base" implementation
+ * for each of the defined acccessor. Some of them use the out_* functions
+ * directly, some of them still use EEH, though we might change that in the
+ * future. Those macros below provide the necessary argument swapping and
+ * handling of the IO base for PIO.
+ *
+ * They are themselves used by the macros that define the actual accessors
+ * and can be used by the hooks if any.
+ *
+ * Note that PIO operations are always defined in terms of their corresonding
+ * MMIO operations. That allows platforms like iSeries who want to modify the
+ * behaviour of both to only hook on the MMIO version and get both. It's also
+ * possible to hook directly at the toplevel PIO operation if they have to
+ * be handled differently
+ */
+#define __do_writeb(val, addr)	out_8(PCI_FIX_ADDR(addr), val)
+#define __do_writew(val, addr)	out_le16(PCI_FIX_ADDR(addr), val)
+#define __do_writel(val, addr)	out_le32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq(val, addr)	out_le64(PCI_FIX_ADDR(addr), val)
+#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
+#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
+
+#ifdef CONFIG_EEH
+#define __do_readb(addr)	eeh_readb(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	eeh_readw(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	eeh_readl(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	eeh_readq(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	eeh_readw_be(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	eeh_readl_be(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	eeh_readq_be(PCI_FIX_ADDR(addr))
+#else /* CONFIG_EEH */
+#define __do_readb(addr)	in_8(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	in_le16(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	in_le32(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	in_le64(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	in_be16(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	in_be32(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	in_be64(PCI_FIX_ADDR(addr))
+#endif /* !defined(CONFIG_EEH) */
+
+#ifdef CONFIG_PPC32
+#define __do_outb(val, port)	_rec_outb(val, port)
+#define __do_outw(val, port)	_rec_outw(val, port)
+#define __do_outl(val, port)	_rec_outl(val, port)
+#define __do_inb(port)		_rec_inb(port)
+#define __do_inw(port)		_rec_inw(port)
+#define __do_inl(port)		_rec_inl(port)
+#else /* CONFIG_PPC32 */
+#define __do_outb(val, port)	writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outw(val, port)	writew(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outl(val, port)	writel(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_inb(port)		readb((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inw(port)		readw((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inl(port)		readl((PCI_IO_ADDR)_IO_BASE + port);
+#endif /* !CONFIG_PPC32 */
+
+#ifdef CONFIG_EEH
+#define __do_readsb(a, b, n)	eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
+#else /* CONFIG_EEH */
+#define __do_readsb(a, b, n)	_insb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	_insw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	_insl(PCI_FIX_ADDR(a), (b), (n))
+#endif /* !CONFIG_EEH */
+#define __do_writesb(a, b, n)	_outsb(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesw(a, b, n)	_outsw(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesl(a, b, n)	_outsl(PCI_FIX_ADDR(a),(b),(n))
+
+#define __do_insb(p, b, n)	readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insw(p, b, n)	readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insl(p, b, n)	readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_outsb(p, b, n)	writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsw(p, b, n)	writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsl(p, b, n)	writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+
+#define __do_memset_io(addr, c, n)	\
+				_memset_io(PCI_FIX_ADDR(addr), c, n)
+#define __do_memcpy_toio(dst, src, n)	\
+				_memcpy_toio(PCI_FIX_ADDR(dst), src, n)
+
+#ifdef CONFIG_EEH
+#define __do_memcpy_fromio(dst, src, n)	\
+				eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
+#else /* CONFIG_EEH */
+#define __do_memcpy_fromio(dst, src, n)	\
+				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
+#endif /* !CONFIG_EEH */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define DEF_PCI_HOOK(x)		x
+#else
+#define DEF_PCI_HOOK(x)		NULL
+#endif
+
+/* Structure containing all the hooks */
+extern struct ppc_pci_io {
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	ret (*name) at;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)	void (*name) at;
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+} ppc_pci_io;
+
+/* The inline wrappers */
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
+static inline ret name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		return ppc_pci_io.name al;			\
+	return __do_##name al;					\
+}
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
+static inline void name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		ppc_pci_io.name al;				\
+	else							\
+		__do_##name al;					\
+}
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+/* Some drivers check for the presence of readq & writeq with
+ * a #ifdef, so we make them happy here.
+ */
+#ifdef __powerpc64__
+#define readq	readq
+#define writeq	writeq
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * We don't do relaxed operations yet, at least not with this semantic
+ */
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#ifdef CONFIG_PPC32
+#define mmiowb()
+#else
+/*
+ * Enforce synchronisation of stores vs. spin_unlock
+ * (this does it explicitly, though our implementation of spin_unlock
+ * does it implicitely too)
+ */
+static inline void mmiowb(void)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
+	: "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
+	: "memory");
+}
+#endif /* !CONFIG_PPC32 */
+
+static inline void iosync(void)
+{
+        __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ * Those are fairly week though. They don't provide a barrier between
+ * MMIO and cacheable storage nor do they provide a barrier vs. locks,
+ * they only provide barriers between 2 __raw MMIO operations and
+ * possibly break write combining.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+
+/*
+ * output pause versions need a delay at least for the
+ * w83c105 ide controller in a p610.
+ */
+#define inb_p(port)             inb(port)
+#define outb_p(val, port)       (udelay(1), outb((val), (port)))
+#define inw_p(port)             inw(port)
+#define outw_p(val, port)       (udelay(1), outw((val), (port)))
+#define inl_p(port)             inl(port)
+#define outl_p(val, port)       (udelay(1), outl((val), (port)))
+
+
+#define IO_SPACE_LIMIT ~(0UL)
+
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @address:   bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * We provide a few variations of it:
+ *
+ * * ioremap is the standard one and provides non-cacheable guarded mappings
+ *   and can be hooked by the platform via ppc_md
+ *
+ * * ioremap_flags allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
+ *   same thing as ioremap_flags.
+ *
+ * * ioremap_nocache is identical to ioremap
+ *
+ * * iounmap undoes such a mapping and can be hooked
+ *
+ * * __ioremap_at (and the pending __iounmap_at) are low level functions to
+ *   create hand-made mappings for use only by the PCI code and cannot
+ *   currently be hooked. Must be page aligned.
+ *
+ * * __ioremap is the low level implementation used by ioremap and
+ *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   of the previous ones)
+ *
+ * * __iounmap, is the low level implementation used by iounmap and cannot
+ *   be hooked (but can be used by a hook on iounmap)
+ *
+ */
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
+				   unsigned long flags);
+#define ioremap_nocache(addr, size)	ioremap((addr), (size))
+#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
+			       unsigned long flags);
+extern void __iounmap(volatile void __iomem *addr);
+
+extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
+				   unsigned long size, unsigned long flags);
+extern void __iounmap_at(void *ea, unsigned long size);
+
+/*
+ * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * which needs some additional definitions here. They basically allow PIO
+ * space overall to be 1GB. This will work as long as we never try to use
+ * iomap to map MMIO below 1GB which should be fine on ppc64
+ */
+#define HAVE_ARCH_PIO_SIZE		1
+#define PIO_OFFSET			0x00000000UL
+#define PIO_MASK			(FULL_IO_SIZE - 1)
+#define PIO_RESERVED			(FULL_IO_SIZE)
+
+#define mmio_read16be(addr)		readw_be(addr)
+#define mmio_read32be(addr)		readl_be(addr)
+#define mmio_write16be(val, addr)	writew_be(val, addr)
+#define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
+#define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
+#define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
+#define mmio_outsb(addr, src, count)	writesb(addr, src, count)
+#define mmio_outsw(addr, src, count)	writesw(addr, src, count)
+#define mmio_outsl(addr, src, count)	writesl(addr, src, count)
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((unsigned long)address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)__va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/* We do NOT want virtual merging, it would put too much pressure on
+ * our iommu allocator. Instead, we want drivers to be smart enough
+ * to coalesce sglists that happen to have been mapped in a contiguous
+ * way by the iommu
+ */
+#define BIO_VMERGE_BOUNDARY	0
+
+/*
+ * 32 bits still uses virt_to_bus() for it's implementation of DMA
+ * mappings se we have to keep it defined here. We also have some old
+ * drivers (shame shame shame) that use bus_to_virt() and haven't been
+ * fixed yet so I need to define it here.
+ */
+#ifdef CONFIG_PPC32
+
+static inline unsigned long virt_to_bus(volatile void * address)
+{
+        if (address == NULL)
+		return 0;
+        return __pa(address) + PCI_DRAM_OFFSET;
+}
+
+static inline void * bus_to_virt(unsigned long address)
+{
+        if (address == 0)
+		return NULL;
+        return __va(address - PCI_DRAM_OFFSET);
+}
+
+#define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
+
+#endif /* CONFIG_PPC32 */
+
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
+
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
+/* Clear and set bits in one shot.  These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write.  These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#ifdef __powerpc64__
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+#endif
+
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+				size_t size, unsigned long flags);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IO_H */
diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/asm/ioctl.h
new file mode 100644
index 000000000000..57d68304218b
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctl.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_POWERPC_IOCTL_H
+#define _ASM_POWERPC_IOCTL_H
+
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#include <asm-generic/ioctl.h>
+
+#endif	/* _ASM_POWERPC_IOCTL_H */
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
new file mode 100644
index 000000000000..279a6229584b
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -0,0 +1,110 @@
+#ifndef _ASM_POWERPC_IOCTLS_H
+#define _ASM_POWERPC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif	/* _ASM_POWERPC_IOCTLS_H */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
new file mode 100644
index 000000000000..51ecfef8d843
--- /dev/null
+++ b/arch/powerpc/include/asm/iommu.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IOMMU_H
+#define _ASM_IOMMU_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/machdep.h>
+#include <asm/types.h>
+
+#define IOMMU_PAGE_SHIFT      12
+#define IOMMU_PAGE_SIZE       (ASM_CONST(1) << IOMMU_PAGE_SHIFT)
+#define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
+#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
+
+/* Boot time flags */
+extern int iommu_is_off;
+extern int iommu_force_on;
+
+/* Pure 2^n version of get_order */
+static __inline__ __attribute_const__ int get_iommu_order(unsigned long size)
+{
+	return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1;
+}
+
+
+/*
+ * IOMAP_MAX_ORDER defines the largest contiguous block
+ * of dma space we can get.  IOMAP_MAX_ORDER = 13
+ * allows up to 2**12 pages (4096 * 4096) = 16 MB
+ */
+#define IOMAP_MAX_ORDER		13
+
+struct iommu_table {
+	unsigned long  it_busno;     /* Bus number this table belongs to */
+	unsigned long  it_size;      /* Size of iommu table in entries */
+	unsigned long  it_offset;    /* Offset into global table */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_index;     /* which iommu table this is */
+	unsigned long  it_type;      /* type: PCI or Virtual Bus */
+	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long  it_largehint; /* Hint for large allocs */
+	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+};
+
+struct scatterlist;
+
+/* Frees table for an individual device node */
+extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
+
+/* Initializes an iommu_table based in values set in the passed-in
+ * structure
+ */
+extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
+					    int nid);
+
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+			struct scatterlist *sglist, int nelems,
+			unsigned long mask, enum dma_data_direction direction,
+			struct dma_attrs *attrs);
+extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+			   int nelems, enum dma_data_direction direction,
+			   struct dma_attrs *attrs);
+
+extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
+				  size_t size, dma_addr_t *dma_handle,
+				  unsigned long mask, gfp_t flag, int node);
+extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
+				   void *vaddr, size_t size, unsigned long mask,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs);
+extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
+			       size_t size, enum dma_data_direction direction,
+			       struct dma_attrs *attrs);
+
+extern void iommu_init_early_pSeries(void);
+extern void iommu_init_early_iSeries(void);
+extern void iommu_init_early_dart(void);
+extern void iommu_init_early_pasemi(void);
+
+#ifdef CONFIG_PCI
+extern void pci_iommu_init(void);
+extern void pci_direct_iommu_init(void);
+#else
+static inline void pci_iommu_init(void) { }
+#endif
+
+extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+	if (ppc_md.iommu_save)
+		ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+	if (ppc_md.iommu_restore)
+		ppc_md.iommu_restore();
+}
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IOMMU_H */
diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..2c3e1d94db1d
--- /dev/null
+++ b/arch/powerpc/include/asm/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_IPCBUF_H
+#define _ASM_POWERPC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for the powerpc is identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the
+ * kernel.  Note extra padding because this structure is passed back
+ * and forth between kernel and user space.  Pad space is left for:
+ *	- 1 32-bit value to fill up for 8-byte alignment
+ *	- 2 miscellaneous 64-bit values
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned int	seq;
+	unsigned int	__pad1;
+	unsigned long long __unused1;
+	unsigned long long __unused2;
+};
+
+#endif /* _ASM_POWERPC_IPCBUF_H */
diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h
new file mode 100644
index 000000000000..4cf35531c0ef
--- /dev/null
+++ b/arch/powerpc/include/asm/ipic.h
@@ -0,0 +1,91 @@
+/*
+ * IPIC external definitions and structure.
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_IPIC_H__
+#define __ASM_IPIC_H__
+
+#include <linux/irq.h>
+
+/* Flags when we init the IPIC */
+#define IPIC_SPREADMODE_GRP_A	0x00000001
+#define IPIC_SPREADMODE_GRP_B	0x00000002
+#define IPIC_SPREADMODE_GRP_C	0x00000004
+#define IPIC_SPREADMODE_GRP_D	0x00000008
+#define IPIC_SPREADMODE_MIX_A	0x00000010
+#define IPIC_SPREADMODE_MIX_B	0x00000020
+#define IPIC_DISABLE_MCP_OUT	0x00000040
+#define IPIC_IRQ0_MCP		0x00000080
+
+/* IPIC registers offsets */
+#define IPIC_SICFR	0x00	/* System Global Interrupt Configuration Register */
+#define IPIC_SIVCR	0x04	/* System Global Interrupt Vector Register */
+#define IPIC_SIPNR_H	0x08	/* System Internal Interrupt Pending Register (HIGH) */
+#define IPIC_SIPNR_L	0x0C	/* System Internal Interrupt Pending Register (LOW) */
+#define IPIC_SIPRR_A	0x10	/* System Internal Interrupt group A Priority Register */
+#define IPIC_SIPRR_B	0x14	/* System Internal Interrupt group B Priority Register */
+#define IPIC_SIPRR_C	0x18	/* System Internal Interrupt group C Priority Register */
+#define IPIC_SIPRR_D	0x1C	/* System Internal Interrupt group D Priority Register */
+#define IPIC_SIMSR_H	0x20	/* System Internal Interrupt Mask Register (HIGH) */
+#define IPIC_SIMSR_L	0x24	/* System Internal Interrupt Mask Register (LOW) */
+#define IPIC_SICNR	0x28	/* System Internal Interrupt Control Register */
+#define IPIC_SEPNR	0x2C	/* System External Interrupt Pending Register */
+#define IPIC_SMPRR_A	0x30	/* System Mixed Interrupt group A Priority Register */
+#define IPIC_SMPRR_B	0x34	/* System Mixed Interrupt group B Priority Register */
+#define IPIC_SEMSR	0x38	/* System External Interrupt Mask Register */
+#define IPIC_SECNR	0x3C	/* System External Interrupt Control Register */
+#define IPIC_SERSR	0x40	/* System Error Status Register */
+#define IPIC_SERMR	0x44	/* System Error Mask Register */
+#define IPIC_SERCR	0x48	/* System Error Control Register */
+#define IPIC_SIFCR_H	0x50	/* System Internal Interrupt Force Register (HIGH) */
+#define IPIC_SIFCR_L	0x54	/* System Internal Interrupt Force Register (LOW) */
+#define IPIC_SEFCR	0x58	/* System External Interrupt Force Register */
+#define IPIC_SERFR	0x5C	/* System Error Force Register */
+#define IPIC_SCVCR	0x60	/* System Critical Interrupt Vector Register */
+#define IPIC_SMVCR	0x64	/* System Management Interrupt Vector Register */
+
+enum ipic_prio_grp {
+	IPIC_INT_GRP_A = IPIC_SIPRR_A,
+	IPIC_INT_GRP_D = IPIC_SIPRR_D,
+	IPIC_MIX_GRP_A = IPIC_SMPRR_A,
+	IPIC_MIX_GRP_B = IPIC_SMPRR_B,
+};
+
+enum ipic_mcp_irq {
+	IPIC_MCP_IRQ0 = 0,
+	IPIC_MCP_WDT  = 1,
+	IPIC_MCP_SBA  = 2,
+	IPIC_MCP_PCI1 = 5,
+	IPIC_MCP_PCI2 = 6,
+	IPIC_MCP_MU   = 7,
+};
+
+extern int ipic_set_priority(unsigned int irq, unsigned int priority);
+extern void ipic_set_highest_priority(unsigned int irq);
+extern void ipic_set_default_priority(void);
+extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
+extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
+extern u32 ipic_get_mcp_status(void);
+extern void ipic_clear_mcp_status(u32 mask);
+
+#ifdef CONFIG_PPC_MERGE
+extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
+extern unsigned int ipic_get_irq(void);
+#else
+extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
+		unsigned int irq_offset,
+		unsigned char *senses, unsigned int senses_count);
+extern int ipic_get_irq(void);
+#endif
+
+#endif /* __ASM_IPIC_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
new file mode 100644
index 000000000000..1ef8e304e0ea
--- /dev/null
+++ b/arch/powerpc/include/asm/irq.h
@@ -0,0 +1,654 @@
+#ifdef __KERNEL__
+#ifndef _ASM_POWERPC_IRQ_H
+#define _ASM_POWERPC_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+extern atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_PPC_MERGE
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
+#define NR_IRQS		512
+
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+struct irq_host;
+struct radix_tree_root;
+
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This is called only once for a given mapping.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Update of such a mapping  */
+	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * type (sense) that can be passed to set_irq_type(). In the absence
+	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
+	 * the type (which amount to keeping whatever default value the
+	 * interrupt controller has for that line)
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+
+	/* Optional device node pointer */
+	struct device_node	*of_node;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
+extern irq_hw_number_t virq_to_hw(unsigned int virq);
+
+/**
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @of_node: optional device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+				       unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/**
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/**
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/**
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq);
+
+
+/**
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/**
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_create_direct_mapping - Allocate a virq for direct mapping
+ * @host: host to allocate the virq for or NULL for default host
+ *
+ * This routine is used for irq controllers which can choose the hardware
+ * interrupt numbers they generate. In such a case it's simplest to use
+ * the linux virq as the hardware interrupt number.
+ */
+extern unsigned int irq_create_direct_mapping(struct irq_host *host);
+
+/**
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/**
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/**
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/**
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+
+#else /* CONFIG_PPC_MERGE */
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(-1)
+#define NO_IRQ_IGNORE		(-2)
+
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK		0x1
+#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
+#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK	0x2
+#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
+
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number  of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define	NR_AIC_IRQS 32
+#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define	NR_UIC_IRQS	32
+#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts.  There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS	16
+#define NR_CPM_INTS	32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET		0
+#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns.  This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define	SIU_IRQ0	(0)	/* Highest priority */
+#define	SIU_LEVEL0	(1)
+#define	SIU_IRQ1	(2)
+#define	SIU_LEVEL1	(3)
+#define	SIU_IRQ2	(4)
+#define	SIU_LEVEL2	(5)
+#define	SIU_IRQ3	(6)
+#define	SIU_LEVEL3	(7)
+#define	SIU_IRQ4	(8)
+#define	SIU_LEVEL4	(9)
+#define	SIU_IRQ5	(10)
+#define	SIU_LEVEL5	(11)
+#define	SIU_IRQ6	(12)
+#define	SIU_LEVEL6	(13)
+#define	SIU_IRQ7	(14)
+#define	SIU_LEVEL7	(15)
+
+#define MPC8xx_INT_FEC1		SIU_LEVEL1
+#define MPC8xx_INT_FEC2		SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT		SIU_LEVEL0
+#endif
+#ifndef	CPM_INTERRUPT
+#define CPM_INTERRUPT		SIU_LEVEL2
+#endif
+#ifndef	PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT	SIU_LEVEL6
+#endif
+#ifndef	DEC_INTERRUPT
+#define DEC_INTERRUPT		SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS			256
+#define __DO_IRQ_CANON	1
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS	16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector".  We are only interested
+ * in the interrupt vector.  There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET	0
+#endif
+
+#define NR_CPM_INTS	64
+
+#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
+#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
+#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
+#define	SIU_INT_USB		((uint)0x0b + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
+#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PCI		((uint)0x12 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+#endif /* Whatever way too big #ifdef */
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+
+/*
+ * Because many systems have two overlapping names spaces for
+ * interrupts (ISA and XICS for example), and the ISA interrupts
+ * have historically not been easy to renumber, we allow ISA
+ * interrupts to take values 0 - 15, and shift up the remaining
+ * interrupts by 0x10.
+ */
+#define NUM_ISA_INTERRUPTS	0x10
+extern int __irq_offset_value;
+
+static inline int irq_offset_up(int irq)
+{
+	return(irq + __irq_offset_value);
+}
+
+static inline int irq_offset_down(int irq)
+{
+	return(irq - __irq_offset_value);
+}
+
+static inline int irq_offset_value(void)
+{
+	return __irq_offset_value;
+}
+
+#ifdef __DO_IRQ_CANON
+extern int ppc_do_canonicalize_irqs;
+#else
+#define ppc_do_canonicalize_irqs	0
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	if (ppc_do_canonicalize_irqs && irq == 2)
+		irq = 9;
+	return irq;
+}
+#endif /* CONFIG_PPC_MERGE */
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_irq(int irq, void *p1,
+			   struct thread_info *tp, void *func);
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h
new file mode 100644
index 000000000000..ba94b51a0a70
--- /dev/null
+++ b/arch/powerpc/include/asm/irq_regs.h
@@ -0,0 +1,2 @@
+#include <asm-generic/irq_regs.h>
+
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
new file mode 100644
index 000000000000..17ba3a881bfd
--- /dev/null
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -0,0 +1,42 @@
+/*
+ * IRQ flags handling
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Get definitions for raw_local_save_flags(x), etc.
+ */
+#include <asm/hw_irq.h>
+
+#else
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Most of the CPU's IRQ-state tracing is done from assembly code; we
+ * have to call a C function so call a wrapper that saves all the
+ * C-clobbered registers.
+ */
+#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
+#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
+	cmpdi	en, 0;				\
+	bne	95f;				\
+	stb	en,PACASOFTIRQEN(r13);		\
+	bl	.trace_hardirqs_off;		\
+	b	skip;				\
+95:	bl	.trace_hardirqs_on;		\
+	li	en,1;
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
+96:	stb	en,PACASOFTIRQEN(r13)
+#else
+#define TRACE_ENABLE_INTS
+#define TRACE_DISABLE_INTS
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	stb	en,PACASOFTIRQEN(r13)
+#endif
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h
new file mode 100644
index 000000000000..c0cce6727a69
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/alpaca.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright © 2008  Stephen Rothwell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
+#define _ASM_POWERPC_ISERIES_ALPACA_H
+
+/*
+ * This is the part of the paca that the iSeries hypervisor
+ * needs to be statically initialised. Immediately after boot
+ * we switch to the normal Linux paca.
+ */
+struct alpaca {
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+	const void *reg_save_ptr;	/* Pointer to LpRegSave for PLIC */
+};
+
+#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h
new file mode 100644
index 000000000000..162d653ad51f
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/paca.h>
+
+/* Type of yield for HvCallBaseYieldProcessor */
+#define HvCall_YieldTimed	0	/* Yield until specified time (tb) */
+#define HvCall_YieldToActive	1	/* Yield until all active procs have run */
+#define HvCall_YieldToProc	2	/* Yield until the specified processor has run */
+
+/* interrupt masks for setEnabledInterrupts */
+#define HvCall_MaskIPI		0x00000001
+#define HvCall_MaskLpEvent	0x00000002
+#define HvCall_MaskLpProd	0x00000004
+#define HvCall_MaskTimeout	0x00000008
+
+/* Log buffer formats */
+#define HvCall_LogBuffer_ASCII          0
+#define HvCall_LogBuffer_EBCDIC         1
+
+#define HvCallBaseAckDeferredInts			HvCallBase +  0
+#define HvCallBaseCpmPowerOff				HvCallBase +  1
+#define HvCallBaseGetHwPatch				HvCallBase +  2
+#define HvCallBaseReIplSpAttn				HvCallBase +  3
+#define HvCallBaseSetASR				HvCallBase +  4
+#define HvCallBaseSetASRAndRfi				HvCallBase +  5
+#define HvCallBaseSetIMR				HvCallBase +  6
+#define HvCallBaseSendIPI				HvCallBase +  7
+#define HvCallBaseTerminateMachine			HvCallBase +  8
+#define HvCallBaseTerminateMachineSrc			HvCallBase +  9
+#define HvCallBaseProcessPlicInterrupts			HvCallBase + 10
+#define HvCallBaseIsPrimaryCpmOrMsdIpl			HvCallBase + 11
+#define HvCallBaseSetVirtualSIT				HvCallBase + 12
+#define HvCallBaseVaryOffThisProcessor			HvCallBase + 13
+#define HvCallBaseVaryOffMemoryChunk			HvCallBase + 14
+#define HvCallBaseVaryOffInteractivePercentage		HvCallBase + 15
+#define HvCallBaseSendLpProd				HvCallBase + 16
+#define HvCallBaseSetEnabledInterrupts			HvCallBase + 17
+#define HvCallBaseYieldProcessor			HvCallBase + 18
+#define HvCallBaseVaryOffSharedProcUnits		HvCallBase + 19
+#define HvCallBaseSetVirtualDecr			HvCallBase + 20
+#define HvCallBaseClearLogBuffer			HvCallBase + 21
+#define HvCallBaseGetLogBufferCodePage			HvCallBase + 22
+#define HvCallBaseGetLogBufferFormat			HvCallBase + 23
+#define HvCallBaseGetLogBufferLength			HvCallBase + 24
+#define HvCallBaseReadLogBuffer				HvCallBase + 25
+#define HvCallBaseSetLogBufferFormatAndCodePage		HvCallBase + 26
+#define HvCallBaseWriteLogBuffer			HvCallBase + 27
+#define HvCallBaseRouter28				HvCallBase + 28
+#define HvCallBaseRouter29				HvCallBase + 29
+#define HvCallBaseRouter30				HvCallBase + 30
+#define HvCallBaseSetDebugBus				HvCallBase + 31
+
+#define HvCallCcSetDABR					HvCallCc + 7
+
+static inline void HvCall_setVirtualDecr(void)
+{
+	/*
+	 * Ignore any error return codes - most likely means that the
+	 * target value for the LP has been increased and this vary off
+	 * would bring us below the new target.
+	 */
+	HvCall0(HvCallBaseSetVirtualDecr);
+}
+
+static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
+{
+	HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
+}
+
+static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
+{
+	HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
+}
+
+static inline void HvCall_setLogBufferFormatAndCodepage(int format,
+		u32 codePage)
+{
+	HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
+}
+
+extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
+
+static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
+{
+	HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h
new file mode 100644
index 000000000000..cc029d388e11
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_event.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/abs_addr.h>
+
+struct HvLpEvent;
+
+typedef u8 HvLpEvent_Type;
+typedef u8 HvLpEvent_AckInd;
+typedef u8 HvLpEvent_AckType;
+
+typedef u8 HvLpDma_Direction;
+typedef u8 HvLpDma_AddressType;
+
+typedef u64 HvLpEvent_Rc;
+typedef u64 HvLpDma_Rc;
+
+#define HvCallEventAckLpEvent				HvCallEvent +  0
+#define HvCallEventCancelLpEvent			HvCallEvent +  1
+#define HvCallEventCloseLpEventPath			HvCallEvent +  2
+#define HvCallEventDmaBufList				HvCallEvent +  3
+#define HvCallEventDmaSingle				HvCallEvent +  4
+#define HvCallEventDmaToSp				HvCallEvent +  5
+#define HvCallEventGetOverflowLpEvents			HvCallEvent +  6
+#define HvCallEventGetSourceLpInstanceId		HvCallEvent +  7
+#define HvCallEventGetTargetLpInstanceId		HvCallEvent +  8
+#define HvCallEventOpenLpEventPath			HvCallEvent +  9
+#define HvCallEventSetLpEventStack			HvCallEvent + 10
+#define HvCallEventSignalLpEvent			HvCallEvent + 11
+#define HvCallEventSignalLpEventParms			HvCallEvent + 12
+#define HvCallEventSetInterLpQueueIndex			HvCallEvent + 13
+#define HvCallEventSetLpEventQueueInterruptProc		HvCallEvent + 14
+#define HvCallEventRouter15				HvCallEvent + 15
+
+static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
+{
+	HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
+}
+
+static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
+{
+	HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
+}
+
+static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
+		char *eventStackAddr, u32 eventStackSize)
+{
+	HvCall3(HvCallEventSetLpEventStack, queueIndex,
+			virt_to_abs(eventStackAddr), eventStackSize);
+}
+
+static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
+		u16 lpLogicalProcIndex)
+{
+	HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
+			lpLogicalProcIndex);
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
+		HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
+		HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
+		HvLpInstanceId targetInstanceId, u64 correlationToken,
+		u64 eventData1, u64 eventData2, u64 eventData3,
+		u64 eventData4, u64 eventData5)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		ack_and_target;
+			u8		type;
+			u16		subtype;
+			HvLpInstanceId	src_inst;
+			HvLpInstanceId	target_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
+	packed.parms.type = type;
+	packed.parms.subtype = subtype;
+	packed.parms.src_inst = sourceInstanceId;
+	packed.parms.target_inst = targetInstanceId;
+
+	return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
+			correlationToken, eventData1, eventData2,
+			eventData3, eventData4, eventData5);
+}
+
+extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
+extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
+			enum dma_data_direction direction);
+extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction);
+
+static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
+}
+
+static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
+}
+
+static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
+}
+
+static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
+		HvLpIndex remoteLp, HvLpDma_Direction direction,
+		HvLpInstanceId localInstanceId,
+		HvLpInstanceId remoteInstanceId,
+		HvLpDma_AddressType localAddressType,
+		HvLpDma_AddressType remoteAddressType,
+		/* Do these need to be converted to absolute addresses? */
+		u64 localBufList, u64 remoteBufList, u32 transferLength)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		flags;
+			HvLpIndex	remote;
+			u8		type;
+			u8		reserved;
+			HvLpInstanceId	local_inst;
+			HvLpInstanceId	remote_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.flags = (direction << 7) |
+		(localAddressType << 6) | (remoteAddressType << 5);
+	packed.parms.remote = remoteLp;
+	packed.parms.type = type;
+	packed.parms.reserved = 0;
+	packed.parms.local_inst = localInstanceId;
+	packed.parms.remote_inst = remoteInstanceId;
+
+	return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
+			remoteBufList, transferLength);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
+		u32 length, HvLpDma_Direction dir)
+{
+	return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
+			length, dir);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h
new file mode 100644
index 000000000000..f5d210959250
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+
+#include <linux/types.h>
+
+#define HvCallBase		0x8000000000000000ul
+#define HvCallCc		0x8001000000000000ul
+#define HvCallCfg		0x8002000000000000ul
+#define HvCallEvent		0x8003000000000000ul
+#define HvCallHpt		0x8004000000000000ul
+#define HvCallPci		0x8005000000000000ul
+#define HvCallSm		0x8007000000000000ul
+#define HvCallXm		0x8009000000000000ul
+
+extern u64 HvCall0(u64);
+extern u64 HvCall1(u64, u64);
+extern u64 HvCall2(u64, u64, u64);
+extern u64 HvCall3(u64, u64, u64, u64);
+extern u64 HvCall4(u64, u64, u64, u64, u64);
+extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
+extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
+
+extern u64 HvCall0Ret16(u64, void *);
+extern u64 HvCall1Ret16(u64, void *, u64);
+extern u64 HvCall2Ret16(u64, void *, u64, u64);
+extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
+extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
+extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
+extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h
new file mode 100644
index 000000000000..392ac3f54df0
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h
@@ -0,0 +1,61 @@
+/*
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from SLIC.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+#define HvCallXmGetTceTableParms	HvCallXm +  0
+#define HvCallXmTestBus			HvCallXm +  1
+#define HvCallXmConnectBusUnit		HvCallXm +  2
+#define HvCallXmLoadTod			HvCallXm +  8
+#define HvCallXmTestBusUnit		HvCallXm +  9
+#define HvCallXmSetTce			HvCallXm + 11
+#define HvCallXmSetTces			HvCallXm + 13
+
+static inline void HvCallXm_getTceTableParms(u64 cb)
+{
+	HvCall1(HvCallXmGetTceTableParms, cb);
+}
+
+static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
+{
+	return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
+}
+
+static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
+		u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
+{
+	return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
+			     tce1, tce2, tce3, tce4);
+}
+
+static inline u64 HvCallXm_testBus(u16 busNumber)
+{
+	return HvCall1(HvCallXmTestBus, busNumber);
+}
+
+static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId)
+{
+	return HvCall2(HvCallXmTestBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId);
+}
+
+static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId, u64 interruptToken)
+{
+	return HvCall5(HvCallXmConnectBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId, interruptToken, 0,
+			0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
+}
+
+static inline u64 HvCallXm_loadTod(void)
+{
+	return HvCall0(HvCallXmLoadTod);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h
new file mode 100644
index 000000000000..a006fd1e4a2c
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+
+/*
+ * This file contains the interface to the LPAR configuration data
+ * to determine which resources should be allocated to each partition.
+ */
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+enum {
+	HvCallCfg_Cur	= 0,
+	HvCallCfg_Init	= 1,
+	HvCallCfg_Max	= 2,
+	HvCallCfg_Min	= 3
+};
+
+#define HvCallCfgGetSystemPhysicalProcessors		HvCallCfg +  6
+#define HvCallCfgGetPhysicalProcessors			HvCallCfg +  7
+#define HvCallCfgGetMsChunks				HvCallCfg +  9
+#define HvCallCfgGetSharedPoolIndex			HvCallCfg + 20
+#define HvCallCfgGetSharedProcUnits			HvCallCfg + 21
+#define HvCallCfgGetNumProcsInSharedPool		HvCallCfg + 22
+#define HvCallCfgGetVirtualLanIndexMap			HvCallCfg + 30
+#define HvCallCfgGetHostingLpIndex			HvCallCfg + 32
+
+extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
+extern HvLpIndex HvLpConfig_getLpIndex(void);
+extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
+
+static inline u64 HvLpConfig_getMsChunks(void)
+{
+	return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
+{
+	return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
+}
+
+static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
+{
+	return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
+}
+
+static inline u64 HvLpConfig_getPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
+{
+	return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
+}
+
+static inline u64 HvLpConfig_getSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
+		HvLpIndex lp)
+{
+	/*
+	 * This is a new function in V5R1 so calls to this on older
+	 * hypervisors will return -1
+	 */
+	u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
+	if (retVal == -1)
+		retVal = 0;
+	return retVal;
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
+{
+	return HvLpConfig_getVirtualLanIndexMapForLp(
+			HvLpConfig_getLpIndex_outline());
+}
+
+static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
+		HvLpIndex lp2)
+{
+	HvLpVirtualLanIndexMap virtualLanIndexMap1 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp1);
+	HvLpVirtualLanIndexMap virtualLanIndexMap2 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp2);
+	return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
+}
+
+static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
+{
+	return HvCall1(HvCallCfgGetHostingLpIndex, lp);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h
new file mode 100644
index 000000000000..8f5da7d77202
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/* This file contains the class for HV events in the system. */
+
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+/*
+ * HvLpEvent is the structure for Lp Event messages passed between
+ * partitions through PLIC.
+ */
+
+struct HvLpEvent {
+	u8	flags;			/* Event flags		      x00-x00 */
+	u8	xType;			/* Type of message	      x01-x01 */
+	u16	xSubtype;		/* Subtype for event	      x02-x03 */
+	u8	xSourceLp;		/* Source LP		      x04-x04 */
+	u8	xTargetLp;		/* Target LP		      x05-x05 */
+	u8	xSizeMinus1;		/* Size of Derived class - 1  x06-x06 */
+	u8	xRc;			/* RC for Ack flows	      x07-x07 */
+	u16	xSourceInstanceId;	/* Source sides instance id   x08-x09 */
+	u16	xTargetInstanceId;	/* Target sides instance id   x0A-x0B */
+	union {
+		u32	xSubtypeData;	/* Data usable by the subtype x0C-x0F */
+		u16	xSubtypeDataShort[2];	/* Data as 2 shorts */
+		u8	xSubtypeDataChar[4];	/* Data as 4 chars */
+	} x;
+
+	u64	xCorrelationToken;	/* Unique value for source/type x10-x17 */
+};
+
+typedef void (*LpEventHandler)(struct HvLpEvent *);
+
+/* Register a handler for an event type - returns 0 on success */
+extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
+		LpEventHandler hdlr);
+
+/*
+ * Unregister a handler for an event type
+ *
+ * This call will sleep until the handler being removed is guaranteed to
+ * be no longer executing on any CPU. Do not call with locks held.
+ *
+ *  returns 0 on success
+ *  Unregister will fail if there are any paths open for the type
+ */
+extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
+
+/*
+ * Open an Lp Event Path for an event type
+ * returns 0 on success
+ * openPath will fail if there is no handler registered for the event type.
+ * The lpIndex specified is the partition index for the target partition
+ * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
+ */
+extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+/*
+ * Close an Lp Event Path for a type and partition
+ * returns 0 on success
+ */
+extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+#define HvLpEvent_Type_Hypervisor 0
+#define HvLpEvent_Type_MachineFac 1
+#define HvLpEvent_Type_SessionMgr 2
+#define HvLpEvent_Type_SpdIo      3
+#define HvLpEvent_Type_VirtualBus 4
+#define HvLpEvent_Type_PciIo      5
+#define HvLpEvent_Type_RioIo      6
+#define HvLpEvent_Type_VirtualLan 7
+#define HvLpEvent_Type_VirtualIo  8
+#define HvLpEvent_Type_NumTypes   9
+
+#define HvLpEvent_Rc_Good 0
+#define HvLpEvent_Rc_BufferNotAvailable 1
+#define HvLpEvent_Rc_Cancelled 2
+#define HvLpEvent_Rc_GenericError 3
+#define HvLpEvent_Rc_InvalidAddress 4
+#define HvLpEvent_Rc_InvalidPartition 5
+#define HvLpEvent_Rc_InvalidSize 6
+#define HvLpEvent_Rc_InvalidSubtype 7
+#define HvLpEvent_Rc_InvalidSubtypeData 8
+#define HvLpEvent_Rc_InvalidType 9
+#define HvLpEvent_Rc_PartitionDead 10
+#define HvLpEvent_Rc_PathClosed 11
+#define HvLpEvent_Rc_SubtypeError 12
+
+#define HvLpEvent_Function_Ack 0
+#define HvLpEvent_Function_Int 1
+
+#define HvLpEvent_AckInd_NoAck 0
+#define HvLpEvent_AckInd_DoAck 1
+
+#define HvLpEvent_AckType_ImmediateAck 0
+#define HvLpEvent_AckType_DeferredAck 1
+
+#define HV_LP_EVENT_INT			0x01
+#define HV_LP_EVENT_DO_ACK		0x02
+#define HV_LP_EVENT_DEFERRED_ACK	0x04
+#define HV_LP_EVENT_VALID		0x80
+
+#define HvLpDma_Direction_LocalToRemote 0
+#define HvLpDma_Direction_RemoteToLocal 1
+
+#define HvLpDma_AddressType_TceIndex 0
+#define HvLpDma_AddressType_RealAddress 1
+
+#define HvLpDma_Rc_Good 0
+#define HvLpDma_Rc_Error 1
+#define HvLpDma_Rc_PartitionDead 2
+#define HvLpDma_Rc_PathClosed 3
+#define HvLpDma_Rc_InvalidAddress 4
+#define HvLpDma_Rc_InvalidLength 5
+
+static inline int hvlpevent_is_valid(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_VALID;
+}
+
+static inline void hvlpevent_invalidate(struct HvLpEvent *h)
+{
+	h->flags &= ~ HV_LP_EVENT_VALID;
+}
+
+static inline int hvlpevent_is_int(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_INT;
+}
+
+static inline int hvlpevent_is_ack(struct HvLpEvent *h)
+{
+	return !hvlpevent_is_int(h);
+}
+
+static inline int hvlpevent_need_ack(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_DO_ACK;
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h
new file mode 100644
index 000000000000..c3e6d2a1d1c3
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_types.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
+#define _ASM_POWERPC_ISERIES_HV_TYPES_H
+
+/*
+ * General typedefs for the hypervisor.
+ */
+
+#include <asm/types.h>
+
+typedef u8	HvLpIndex;
+typedef u16	HvLpInstanceId;
+typedef u64	HvLpTOD;
+typedef u64	HvLpSystemSerialNum;
+typedef u8	HvLpDeviceSerialNum[12];
+typedef u16	HvLpSanHwSet;
+typedef u16	HvLpBus;
+typedef u16	HvLpBoard;
+typedef u16	HvLpCard;
+typedef u8	HvLpDeviceType[4];
+typedef u8	HvLpDeviceModel[3];
+typedef u64	HvIoToken;
+typedef u8	HvLpName[8];
+typedef u32	HvIoId;
+typedef u64	HvRealMemoryIndex;
+typedef u32	HvLpIndexMap;	/* Must hold HVMAXARCHITECTEDLPS bits!!! */
+typedef u16	HvLpVrmIndex;
+typedef u32	HvXmGenerationId;
+typedef u8	HvLpBusPool;
+typedef u8	HvLpSharedPoolIndex;
+typedef u16	HvLpSharedProcUnitsX100;
+typedef u8	HvLpVirtualLanIndex;
+typedef u16	HvLpVirtualLanIndexMap;	/* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
+typedef u16	HvBusNumber;	/* Hypervisor Bus Number */
+typedef u8	HvSubBusNumber;	/* Hypervisor SubBus Number */
+typedef u8	HvAgentId;	/* Hypervisor DevFn */
+
+
+#define HVMAXARCHITECTEDLPS		32
+#define HVMAXARCHITECTEDVIRTUALLANS	16
+#define HVMAXARCHITECTEDVIRTUALDISKS	32
+#define HVMAXARCHITECTEDVIRTUALCDROMS	8
+#define HVMAXARCHITECTEDVIRTUALTAPES	8
+#define HVCHUNKSIZE			(256 * 1024)
+#define HVPAGESIZE			(4 * 1024)
+#define HVLPMINMEGSPRIMARY		256
+#define HVLPMINMEGSSECONDARY		64
+#define HVCHUNKSPERMEG			4
+#define HVPAGESPERMEG			256
+#define HVPAGESPERCHUNK			64
+
+#define HvLpIndexInvalid		((HvLpIndex)0xff)
+
+/*
+ * Enums for the sub-components under PLIC
+ * Used in HvCall  and HvPrimaryCall
+ */
+enum {
+	HvCallCompId = 0,
+	HvCallCpuCtlsCompId = 1,
+	HvCallCfgCompId = 2,
+	HvCallEventCompId = 3,
+	HvCallHptCompId = 4,
+	HvCallPciCompId = 5,
+	HvCallSlmCompId = 6,
+	HvCallSmCompId = 7,
+	HvCallSpdCompId = 8,
+	HvCallXmCompId = 9,
+	HvCallRioCompId = 10,
+	HvCallRsvd3CompId = 11,
+	HvCallRsvd2CompId = 12,
+	HvCallRsvd1CompId = 13,
+	HvCallMaxCompId = 14,
+	HvPrimaryCallCompId = 0,
+	HvPrimaryCallCfgCompId = 1,
+	HvPrimaryCallPciCompId = 2,
+	HvPrimaryCallSmCompId = 3,
+	HvPrimaryCallSpdCompId = 4,
+	HvPrimaryCallXmCompId = 5,
+	HvPrimaryCallRioCompId = 6,
+	HvPrimaryCallRsvd7CompId = 7,
+	HvPrimaryCallRsvd6CompId = 8,
+	HvPrimaryCallRsvd5CompId = 9,
+	HvPrimaryCallRsvd4CompId = 10,
+	HvPrimaryCallRsvd3CompId = 11,
+	HvPrimaryCallRsvd2CompId = 12,
+	HvPrimaryCallRsvd1CompId = 13,
+	HvPrimaryCallMaxCompId = HvCallMaxCompId
+};
+
+struct HvLpBufferList {
+	u64 addr;
+	u64 len;
+};
+
+#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */
diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
new file mode 100644
index 000000000000..c59ee7e4bed1
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
+#define _ASM_POWERPC_ISERIES_IOMMU_H
+
+/*
+ * Copyright (C) 2005  Stephen Rothwell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA  02111-1307  USA
+ */
+
+struct pci_dev;
+struct vio_dev;
+struct device_node;
+struct iommu_table;
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
+				       struct device_node *dn);
+
+/* Get table parameters from HV */
+extern void iommu_table_getparms_iSeries(unsigned long busno,
+		unsigned char slotno, unsigned char virtbus,
+		struct iommu_table *tbl);
+
+extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
+extern void iommu_vio_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h
new file mode 100644
index 000000000000..428278838821
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+
+/*
+ *	This control block defines the simple LP queue structure that is
+ *	shared between the hypervisor (PLIC) and the OS in order to send
+ *	events to an LP.
+ */
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define IT_LP_MAX_QUEUES	8
+
+#define IT_LP_NOT_USED		0	/* Queue will not be used by PLIC */
+#define IT_LP_DEDICATED_IO	1	/* Queue dedicated to IO processor specified */
+#define IT_LP_DEDICATED_LP	2	/* Queue dedicated to LP specified */
+#define IT_LP_SHARED		3	/* Queue shared for both IO and LP */
+
+#define IT_LP_EVENT_STACK_SIZE	4096
+#define IT_LP_EVENT_MAX_SIZE	256
+#define IT_LP_EVENT_ALIGN	64
+
+struct hvlpevent_queue {
+/*
+ * The hq_current_event is the pointer to the next event stack entry
+ * that will become valid.  The OS must peek at this entry to determine
+ * if it is valid.  PLIC will set the valid indicator as the very last
+ * store into that entry.
+ *
+ * When the OS has completed processing of the event then it will mark
+ * the event as invalid so that PLIC knows it can store into that event
+ * location again.
+ *
+ * If the event stack fills and there are overflow events, then PLIC
+ * will set the hq_overflow_pending flag in which case the OS will
+ * have to fetch the additional LP events once they have drained the
+ * event stack.
+ *
+ * The first 16-bytes are known by both the OS and PLIC.  The remainder
+ * of the cache line is for use by the OS.
+ */
+	u8		hq_overflow_pending;	/* 0x00 Overflow events are pending */
+	u8		hq_status;		/* 0x01 DedicatedIo or DedicatedLp or NotUsed */
+	u16		hq_proc_index;		/* 0x02 Logical Proc Index for correlation */
+	u8		hq_reserved1[12];	/* 0x04 */
+	char		*hq_current_event;	/* 0x10 */
+	char		*hq_last_event;		/* 0x18 */
+	char		*hq_event_stack;	/* 0x20 */
+	u8		hq_index;		/* 0x28 unique sequential index. */
+	u8		hq_reserved2[3];	/* 0x29-2b */
+	spinlock_t	hq_lock;
+};
+
+extern struct hvlpevent_queue hvlpevent_queue;
+
+extern int hvlpevent_is_pending(void);
+extern void process_hvlpevents(void);
+extern void setup_hvlpevent_queue(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */
diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h
new file mode 100644
index 000000000000..5e9f3e128ee2
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/lpar_map.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
+#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#endif
+
+/*
+ * The iSeries hypervisor will set up mapping for one or more
+ * ESID/VSID pairs (in SLB/segment registers) and will set up
+ * mappings of one or more ranges of pages to VAs.
+ * We will have the hypervisor set up the ESID->VSID mapping
+ * for the four kernel segments (C-F).  With shared processors,
+ * the hypervisor will clear all segment registers and reload
+ * these four whenever the processor is switched from one
+ * partition to another.
+ */
+
+/* The Vsid and Esid identified below will be used by the hypervisor
+ * to set up a memory mapping for part of the load area before giving
+ * control to the Linux kernel.  The load area is 64 MB, but this must
+ * not attempt to map the whole load area.  The Hashed Page Table may
+ * need to be located within the load area (if the total partition size
+ * is 64 MB), but cannot be mapped.  Typically, this should specify
+ * to map half (32 MB) of the load area.
+ *
+ * The hypervisor will set up page table entries for the number of
+ * pages specified.
+ *
+ * In 32-bit mode, the hypervisor will load all four of the
+ * segment registers (identified by the low-order four bits of the
+ * Esid field.  In 64-bit mode, the hypervisor will load one SLB
+ * entry to map the Esid to the Vsid.
+*/
+
+#define HvEsidsToMap	2
+#define HvRangesToMap	1
+
+/* Hypervisor initially maps 32MB of the load area */
+#define HvPagesToMap	8192
+
+#ifndef __ASSEMBLY__
+struct LparMap {
+	u64	xNumberEsids;	// Number of ESID/VSID pairs
+	u64	xNumberRanges;	// Number of VA ranges to map
+	u64	xSegmentTableOffs; // Page number within load area of seg table
+	u64	xRsvd[5];
+	struct {
+		u64	xKernelEsid;	// Esid used to map kernel load
+		u64	xKernelVsid;	// Vsid used to map kernel load
+	} xEsids[HvEsidsToMap];
+	struct {
+		u64	xPages;		// Number of pages to be mapped
+		u64	xOffset;	// Offset from start of load area
+		u64	xVPN;		// Virtual Page Number
+	} xRanges[HvRangesToMap];
+};
+
+extern const struct LparMap	xLparMap;
+
+#endif /* __ASSEMBLY__ */
+
+/* the fixed address where the LparMap exists */
+#define LPARMAP_PHYS		0x7000
+
+#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */
diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h
new file mode 100644
index 000000000000..eb851a9c9e5c
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/mf.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
+ * Copyright (C) 2004  Stephen Rothwell IBM Corporation
+ *
+ * This modules exists as an interface between a Linux secondary partition
+ * running on an iSeries and the primary partition's Virtual Service
+ * Processor (VSP) object.  The VSP has final authority over powering on/off
+ * all partitions in the iSeries.  It also provides miscellaneous low-level
+ * machine facility type operations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_MF_H
+#define _ASM_POWERPC_ISERIES_MF_H
+
+#include <linux/types.h>
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+struct rtc_time;
+
+typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
+
+extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned size, unsigned amount, MFCompleteHandler hdlr,
+		void *userToken);
+extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned count, MFCompleteHandler hdlr, void *userToken);
+
+extern void mf_power_off(void);
+extern void mf_reboot(char *cmd);
+
+extern void mf_display_src(u32 word);
+extern void mf_display_progress(u16 value);
+
+extern void mf_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_MF_H */
diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h
new file mode 100644
index 000000000000..f9ac0d00b951
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/vio.h
@@ -0,0 +1,265 @@
+/* -*- linux-c -*-
+ *
+ *  iSeries Virtual I/O Message Path header
+ *
+ *  Authors: Dave Boutcher <boutcher@us.ibm.com>
+ *           Ryan Arnold <ryanarn@us.ibm.com>
+ *           Colin Devilbiss <devilbis@us.ibm.com>
+ *
+ * (C) Copyright 2000 IBM Corporation
+ *
+ * This header file is used by the iSeries virtual I/O device
+ * drivers.  It defines the interfaces to the common functions
+ * (implemented in drivers/char/viopath.h) as well as defining
+ * common functions and structures.  Currently (at the time I
+ * wrote this comment) the iSeries virtual I/O device drivers
+ * that use this are
+ *   drivers/block/viodasd.c
+ *   drivers/char/viocons.c
+ *   drivers/char/viotape.c
+ *   drivers/cdrom/viocd.c
+ *
+ * The iSeries virtual ethernet support (veth.c) uses a whole
+ * different set of functions.
+ *
+ * This program is free software;  you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) anyu later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef _ASM_POWERPC_ISERIES_VIO_H
+#define _ASM_POWERPC_ISERIES_VIO_H
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_event.h>
+
+/*
+ * iSeries virtual I/O events use the subtype field in
+ * HvLpEvent to figure out what kind of vio event is coming
+ * in.  We use a table to route these, and this defines
+ * the maximum number of distinct subtypes
+ */
+#define VIO_MAX_SUBTYPES 8
+
+#define VIOMAXBLOCKDMA	12
+
+struct open_data {
+	u64	disk_size;
+	u16	max_disk;
+	u16	cylinders;
+	u16	tracks;
+	u16	sectors;
+	u16	bytes_per_sector;
+};
+
+struct rw_data {
+	u64	offset;
+	struct {
+		u32	token;
+		u32	reserved;
+		u64	len;
+	} dma_info[VIOMAXBLOCKDMA];
+};
+
+struct vioblocklpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	union {
+		struct open_data	open_data;
+		struct rw_data		rw_data;
+		u64			changed;
+	} u;
+};
+
+#define vioblockflags_ro   0x0001
+
+enum vioblocksubtype {
+	vioblockopen = 0x0001,
+	vioblockclose = 0x0002,
+	vioblockread = 0x0003,
+	vioblockwrite = 0x0004,
+	vioblockflush = 0x0005,
+	vioblockcheck = 0x0007
+};
+
+struct viocdlpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	u32			token;
+	u64			offset;		/* On open, max number of disks */
+	u64			len;		/* On open, size of the disk */
+	u32			block_size;	/* Only set on open */
+	u32			media_size;	/* Only set on open */
+};
+
+enum viocdsubtype {
+	viocdopen = 0x0001,
+	viocdclose = 0x0002,
+	viocdread = 0x0003,
+	viocdwrite = 0x0004,
+	viocdlockdoor = 0x0005,
+	viocdgetinfo = 0x0006,
+	viocdcheck = 0x0007
+};
+
+struct viotapelpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 sub_type_result;
+	u16 tape;
+	u16 flags;
+	u32 token;
+	u64 len;
+	union {
+		struct {
+			u32 tape_op;
+			u32 count;
+		} op;
+		struct {
+			u32 type;
+			u32 resid;
+			u32 dsreg;
+			u32 gstat;
+			u32 erreg;
+			u32 file_no;
+			u32 block_no;
+		} get_status;
+		struct {
+			u32 block_no;
+		} get_pos;
+	} u;
+};
+
+enum viotapesubtype {
+	viotapeopen = 0x0001,
+	viotapeclose = 0x0002,
+	viotaperead = 0x0003,
+	viotapewrite = 0x0004,
+	viotapegetinfo = 0x0005,
+	viotapeop = 0x0006,
+	viotapegetpos = 0x0007,
+	viotapesetpos = 0x0008,
+	viotapegetstatus = 0x0009
+};
+
+/*
+ * Each subtype can register a handler to process their events.
+ * The handler must have this interface.
+ */
+typedef void (vio_event_handler_t) (struct HvLpEvent * event);
+
+extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
+extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
+extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
+extern int vio_clearHandler(int subtype);
+extern int viopath_isactive(HvLpIndex lp);
+extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
+extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
+extern void vio_set_hostlp(void);
+extern void *vio_get_event_buffer(int subtype);
+extern void vio_free_event_buffer(int subtype, void *buffer);
+
+extern struct vio_dev *vio_create_viodasd(u32 unit);
+
+extern HvLpIndex viopath_hostLp;
+extern HvLpIndex viopath_ourLp;
+
+#define VIOCHAR_MAX_DATA	200
+
+#define VIOMAJOR_SUBTYPE_MASK	0xff00
+#define VIOMINOR_SUBTYPE_MASK	0x00ff
+#define VIOMAJOR_SUBTYPE_SHIFT	8
+
+#define VIOVERSION		0x0101
+
+/*
+ * This is the general structure for VIO errors; each module should have
+ * a table of them, and each table should be terminated by an entry of
+ * { 0, 0, NULL }.  Then, to find a specific error message, a module
+ * should pass its local table and the return code.
+ */
+struct vio_error_entry {
+	u16 rc;
+	int errno;
+	const char *msg;
+};
+extern const struct vio_error_entry *vio_lookup_rc(
+		const struct vio_error_entry *local_table, u16 rc);
+
+enum viosubtypes {
+	viomajorsubtype_monitor = 0x0100,
+	viomajorsubtype_blockio = 0x0200,
+	viomajorsubtype_chario = 0x0300,
+	viomajorsubtype_config = 0x0400,
+	viomajorsubtype_cdio = 0x0500,
+	viomajorsubtype_tape = 0x0600,
+	viomajorsubtype_scsi = 0x0700
+};
+
+enum vioconfigsubtype {
+	vioconfigget = 0x0001,
+};
+
+enum viorc {
+	viorc_good = 0x0000,
+	viorc_noConnection = 0x0001,
+	viorc_noReceiver = 0x0002,
+	viorc_noBufferAvailable = 0x0003,
+	viorc_invalidMessageType = 0x0004,
+	viorc_invalidRange = 0x0201,
+	viorc_invalidToken = 0x0202,
+	viorc_DMAError = 0x0203,
+	viorc_useError = 0x0204,
+	viorc_releaseError = 0x0205,
+	viorc_invalidDisk = 0x0206,
+	viorc_openRejected = 0x0301
+};
+
+/*
+ * The structure of the events that flow between us and OS/400 for chario
+ * events.  You can't mess with this unless the OS/400 side changes too.
+ */
+struct viocharlpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 subtype_result_code;
+	u8 virtual_device;
+	u8 len;
+	u8 data[VIOCHAR_MAX_DATA];
+};
+
+#define VIOCHAR_WINDOW		10
+
+enum viocharsubtype {
+	viocharopen = 0x0001,
+	viocharclose = 0x0002,
+	viochardata = 0x0003,
+	viocharack = 0x0004,
+	viocharconfig = 0x0005
+};
+
+enum viochar_rc {
+	viochar_rc_ebusy = 1
+};
+
+#endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h
new file mode 100644
index 000000000000..ae6d206728af
--- /dev/null
+++ b/arch/powerpc/include/asm/kdebug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_KDEBUG_H
+#define _ASM_POWERPC_KDEBUG_H
+#ifdef __KERNEL__
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_IABR_MATCH,
+	DIE_DABR_MATCH,
+	DIE_BPT,
+	DIE_SSTEP,
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
new file mode 100644
index 000000000000..f6c93c716898
--- /dev/null
+++ b/arch/powerpc/include/asm/kdump.h
@@ -0,0 +1,35 @@
+#ifndef _PPC64_KDUMP_H
+#define _PPC64_KDUMP_H
+
+/* Kdump kernel runs at 32 MB, change at your peril. */
+#define KDUMP_KERNELBASE	0x2000000
+
+/* How many bytes to reserve at zero for kdump. The reserve limit should
+ * be greater or equal to the trampoline's end address.
+ * Reserve to the end of the FWNMI area, see head_64.S */
+#define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
+
+#ifdef CONFIG_CRASH_DUMP
+
+#define KDUMP_TRAMPOLINE_START	0x0100
+#define KDUMP_TRAMPOLINE_END	0x3000
+
+#define KDUMP_MIN_TCE_ENTRIES	2048
+
+#endif /* CONFIG_CRASH_DUMP */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_CRASH_DUMP
+
+extern void reserve_kdump_trampoline(void);
+extern void setup_kdump_trampoline(void);
+
+#else /* !CONFIG_CRASH_DUMP */
+
+static inline void reserve_kdump_trampoline(void) { ; }
+static inline void setup_kdump_trampoline(void) { ; }
+
+#endif /* CONFIG_CRASH_DUMP */
+#endif /* __ASSEMBLY__ */
+
+#endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
new file mode 100644
index 000000000000..acdcdc66f1b6
--- /dev/null
+++ b/arch/powerpc/include/asm/kexec.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_POWERPC_KEXEC_H
+#define _ASM_POWERPC_KEXEC_H
+#ifdef __KERNEL__
+
+/*
+ * Maximum page that is mapped directly into kernel memory.
+ * XXX: Since we copy virt we can use any page we allocate
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/*
+ * Maximum address we can reach in physical address mode.
+ * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
+ */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+#ifdef __powerpc64__
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+#else
+/* TASK_SIZE, probably left over from use_mm ?? */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#endif
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+/* The native architecture */
+#ifdef __powerpc64__
+#define KEXEC_ARCH KEXEC_ARCH_PPC64
+#else
+#define KEXEC_ARCH KEXEC_ARCH_PPC
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+
+typedef void (*crash_shutdown_t)(void);
+
+#ifdef CONFIG_KEXEC
+
+#ifdef __powerpc64__
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic or invoking dump using sysrq-trigger.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		/* FIXME Merge this with xmon_save_regs ?? */
+		unsigned long tmp1, tmp2;
+		__asm__ __volatile__ (
+			"std    0,0(%2)\n"
+			"std    1,8(%2)\n"
+			"std    2,16(%2)\n"
+			"std    3,24(%2)\n"
+			"std    4,32(%2)\n"
+			"std    5,40(%2)\n"
+			"std    6,48(%2)\n"
+			"std    7,56(%2)\n"
+			"std    8,64(%2)\n"
+			"std    9,72(%2)\n"
+			"std    10,80(%2)\n"
+			"std    11,88(%2)\n"
+			"std    12,96(%2)\n"
+			"std    13,104(%2)\n"
+			"std    14,112(%2)\n"
+			"std    15,120(%2)\n"
+			"std    16,128(%2)\n"
+			"std    17,136(%2)\n"
+			"std    18,144(%2)\n"
+			"std    19,152(%2)\n"
+			"std    20,160(%2)\n"
+			"std    21,168(%2)\n"
+			"std    22,176(%2)\n"
+			"std    23,184(%2)\n"
+			"std    24,192(%2)\n"
+			"std    25,200(%2)\n"
+			"std    26,208(%2)\n"
+			"std    27,216(%2)\n"
+			"std    28,224(%2)\n"
+			"std    29,232(%2)\n"
+			"std    30,240(%2)\n"
+			"std    31,248(%2)\n"
+			"mfmsr  %0\n"
+			"std    %0, 264(%2)\n"
+			"mfctr  %0\n"
+			"std    %0, 280(%2)\n"
+			"mflr   %0\n"
+			"std    %0, 288(%2)\n"
+			"bl     1f\n"
+		"1:     mflr   %1\n"
+			"std    %1, 256(%2)\n"
+			"mtlr   %0\n"
+			"mfxer  %0\n"
+			"std    %0, 296(%2)\n"
+			: "=&r" (tmp1), "=&r" (tmp2)
+			: "b" (newregs)
+			: "memory");
+	}
+}
+#else
+/*
+ * Provide a dummy definition to avoid build failures. Will remain
+ * empty till crash dump support is enabled.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+#endif /* !__powerpc64 __ */
+
+extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
+					  master to copy new code to 0 */
+extern int crashing_cpu;
+extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+extern cpumask_t cpus_in_sr;
+static inline int kexec_sr_activated(int cpu)
+{
+	return cpu_isset(cpu,cpus_in_sr);
+}
+
+struct kimage;
+struct pt_regs;
+extern void default_machine_kexec(struct kimage *image);
+extern int default_machine_kexec_prepare(struct kimage *image);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+extern int crash_shutdown_register(crash_shutdown_t handler);
+extern int crash_shutdown_unregister(crash_shutdown_t handler);
+
+extern void machine_kexec_simple(struct kimage *image);
+extern void crash_kexec_secondary(struct pt_regs *regs);
+extern int overlaps_crashkernel(unsigned long start, unsigned long size);
+extern void reserve_crashkernel(void);
+
+#else /* !CONFIG_KEXEC */
+static inline int kexec_sr_activated(int cpu) { return 0; }
+static inline void crash_kexec_secondary(struct pt_regs *regs) { }
+
+static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return 0;
+}
+
+static inline void reserve_crashkernel(void) { ; }
+
+static inline int crash_shutdown_register(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+static inline int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+#endif /* CONFIG_KEXEC */
+#endif /* ! __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
new file mode 100644
index 000000000000..d8520ef121f9
--- /dev/null
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -0,0 +1,261 @@
+#ifndef _ASM_POWERPC_KEYLARGO_H
+#define _ASM_POWERPC_KEYLARGO_H
+#ifdef __KERNEL__
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV		0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR		0x34	/* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0		0x38
+#define KEYLARGO_FCR1		0x3c
+#define KEYLARGO_FCR2		0x40
+#define KEYLARGO_FCR3		0x44
+#define KEYLARGO_FCR4		0x48
+#define KEYLARGO_FCR5		0x4c	/* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6			0x34
+#define K2_FCR7			0x30
+#define K2_FCR8			0x2c
+#define K2_FCR9			0x28
+#define K2_FCR10		0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0		0x50
+#define KEYLARGO_GPIO_LEVELS1		0x54
+#define KEYLARGO_GPIO_EXTINT_0		0x58
+#define KEYLARGO_GPIO_EXTINT_CNT	18
+#define KEYLARGO_GPIO_0			0x6A
+#define KEYLARGO_GPIO_CNT		17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE	0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE	0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA	0x01
+#define KEYLARGO_GPIO_INPUT_DATA	0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0		0x58
+#define K2_GPIO_EXTINT_CNT		51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET		(KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER		(KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER		(KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE		(KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET		(KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1		(KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT	0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE	0x38
+
+#define KL_GPIO_RESET_CPU0		(KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1		(KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2		(KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3		(KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT		KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0		(KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1		(KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2		(KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3		(KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4		(KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE		0x00000800	/* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE		0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE	0x00002000	/* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE	0x00004000	/* hrm... */
+#define KL_MBCR_MB0_DEV_MASK		0x00007800
+#define KL_MBCR_MB0_DEV_POWER		0x00000400
+#define KL_MBCR_MB0_DEV_RESET		0x00000200
+#define KL_MBCR_MB0_ENABLE		0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE		0x08000000	/* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE		0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE	0x20000000	/* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE	0x40000000	/* hrm... */
+#define KL_MBCR_MB1_DEV_MASK		0x78000000
+#define KL_MBCR_MB1_DEV_POWER		0x04000000
+#define KL_MBCR_MB1_DEV_RESET		0x02000000
+#define KL_MBCR_MB1_ENABLE		0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE		0x00000001	/* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE		0x00000002
+#define KL0_SCC_SLOWPCLK		0x00000004
+#define KL0_SCC_RESET			0x00000008
+#define KL0_SCCA_ENABLE			0x00000010
+#define KL0_SCCB_ENABLE			0x00000020
+#define KL0_SCC_CELL_ENABLE		0x00000040
+#define KL0_IRDA_HIGH_BAND		0x00000100	/* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL		0x00000200	/* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL		0x00000400	/* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE		0x00000400	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET			0x00000800	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL	0x00000800	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1		0x00001000	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND		0x00001000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0		0x00002000	/* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND		0x00002000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT		0x00004000	/* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE		0x00004000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE			0x00008000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL	0x00008000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE		0x00010000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND		0x00010000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE		0x00020000	/* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND		0x00020000	/* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0		0x00040000
+#define KL0_USB0_PAD_SUSPEND1		0x00080000
+#define KL0_USB0_CELL_ENABLE		0x00100000
+#define KL0_USB1_PAD_SUSPEND0		0x00400000
+#define KL0_USB1_PAD_SUSPEND1		0x00800000
+#define KL0_USB1_CELL_ENABLE		0x01000000
+#define KL0_USB_REF_SUSPEND		0x10000000	/* (KL Only) */
+
+#define KL0_SERIAL_ENABLE		(KL0_SCC_B_INTF_ENABLE | \
+					KL0_SCC_SLOWPCLK | \
+					KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE		0x00000001	/* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK		0x00000002	/* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL	0x00000002	/* Intrepid only */
+#define KL1_USB2_REF_SUSPEND		0x00000004	/* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT	0x00000008	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL	0x00000008	/* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0		0x00000010	/* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE	0x00000020	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1		0x00000020	/* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE		0x00000040	/* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE		0x00000040	/* Intrepid only */
+#define KL1_AUDIO_CHOOSE		0x00000080	/* KL/Pangea only */
+#define KL1_I2S0_CHOOSE			0x00000200	/* KL Only */
+#define KL1_I2S0_CELL_ENABLE		0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT		0x00001000
+#define KL1_I2S0_ENABLE			0x00002000
+#define KL1_I2S1_CELL_ENABLE		0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT		0x00080000
+#define KL1_I2S1_ENABLE			0x00100000
+#define KL1_EIDE0_ENABLE		0x00800000	/* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N		0x01000000	/* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE		0x04000000	/* KL Only */
+#define KL1_EIDE1_RESET_N		0x08000000	/* KL Only */
+#define KL1_UIDE_ENABLE			0x20000000	/* KL/Pangea Only */
+#define KL1_UIDE_RESET_N		0x40000000	/* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE		0x00000002
+#define KL2_SLEEP_STATE_BIT		0x00000100	/* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS		0x00000100	/* Pangea Only */
+#define KL2_MPIC_ENABLE			0x00020000
+#define KL2_CARDSLOT_RESET		0x00040000	/* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT		0x02000000	/* KL Only ??? */
+#define KL2_MEM_IS_BIG			0x04000000
+#define KL2_CARDSEL_16			0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL		0x00000001	/* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6		0x00000002	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3		0x00000002	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4		0x00000004	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2		0x00000004	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35		0x00000008	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1		0x00000008	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12		0x00000010	/* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_PLL_RESET			0x00000020	/* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN	0x00000020	/* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X		0x00000080	/* KL Only */
+#define KL3_CLK66_ENABLE		0x00000100	/* KL Only */
+#define KL3_CLK49_ENABLE		0x00000200
+#define KL3_CLK45_ENABLE		0x00000400
+#define KL3_CLK31_ENABLE		0x00000800	/* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE		0x00001000
+#define KL3_I2S1_CLK18_ENABLE		0x00002000
+#define KL3_I2S0_CLK18_ENABLE		0x00004000
+#define KL3_VIA_CLK16_ENABLE		0x00008000	/* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE		0x00008000	/* Intrepid only */
+#define KL3_STOPPING33_ENABLED		0x00080000	/* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST		0x00080000	/* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p)		(0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p)		(0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p)		(0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)	(0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p)		(0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p)		(0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p)		(0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p)	(0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p)	(0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p)	(0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p)	(0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p)		(0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p)	(0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p)	(0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31		0000000001	/* Pangea Only */
+#define KL5_SCC_USE_CLK31		0x00000002	/* Pangea Only */
+#define KL5_PWM_CLK32_EN		0x00000004
+#define KL5_CLK3_68_EN			0x00000010
+#define KL5_CLK32_EN			0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET		0x00200000
+#define K2_FCR0_USB1_SWRESET		0x02000000
+#define K2_FCR0_RING_PME_DISABLE	0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N	0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN	0x00000020
+#define K2_FCR1_I2S0_CELL_ENABLE	0x00000400
+#define K2_FCR1_I2S0_RESET		0x00000800
+#define K2_FCR1_I2S0_CLK_ENABLE_BIT	0x00001000
+#define K2_FCR1_I2S0_ENABLE    		0x00002000
+#define K2_FCR1_PCI1_CLK_ENABLE		0x00004000
+#define K2_FCR1_FW_CLK_ENABLE		0x00008000
+#define K2_FCR1_FW_RESET_N		0x00010000
+#define K2_FCR1_I2S1_CELL_ENABLE	0x00020000
+#define K2_FCR1_I2S1_CLK_ENABLE_BIT	0x00080000
+#define K2_FCR1_I2S1_ENABLE		0x00100000
+#define K2_FCR1_GMAC_CLK_ENABLE		0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN		0x00800000
+#define K2_FCR1_GMAC_RESET_N		0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE		0x02000000
+#define K2_FCR1_SATA_POWER_DOWN		0x04000000
+#define K2_FCR1_SATA_RESET_N		0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE		0x10000000
+#define K2_FCR1_UATA_RESET_N		0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66	0x80000000
+
+/* Shasta definitions */
+#define SH_FCR1_I2S2_CELL_ENABLE	0x00000010
+#define SH_FCR1_I2S2_CLK_ENABLE_BIT	0x00000040
+#define SH_FCR1_I2S2_ENABLE		0x00000080
+#define SH_FCR3_I2S2_CLK18_ENABLE	0x00008000
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h
new file mode 100644
index 000000000000..edd217006d27
--- /dev/null
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -0,0 +1,63 @@
+/*
+ * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
+ * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Author: Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifdef __KERNEL__
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define BREAK_INSTR_SIZE	4
+#define BUFMAX			((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE	1
+
+/* The number bytes of registers we have to save depends on a few
+ * things.  For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
+/*
+ * 64 bit (8 byte) registers:
+ *   32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ *   ccr, xer, fpscr
+ */
+#define NUMREGBYTES		((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES		184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG			(PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG                 ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES		(MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES		(23 * sizeof(int))
+#endif /* 32/64 */
+#endif /* !(__ASSEMBLY__) */
+#endif /* !__POWERPC_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
new file mode 100644
index 000000000000..b6bac6f61c16
--- /dev/null
+++ b/arch/powerpc/include/asm/kmap_types.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_KMAP_TYPES_H
+#define _ASM_POWERPC_KMAP_TYPES_H
+
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_PPC_SYNC_PAGE,
+	KM_PPC_SYNC_ICACHE,
+	KM_TYPE_NR
+};
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KMAP_TYPES_H */
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
new file mode 100644
index 000000000000..d0e7701fa1f6
--- /dev/null
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_POWERPC_KPROBES_H
+#define _ASM_POWERPC_KPROBES_H
+#ifdef __KERNEL__
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct pt_regs;
+struct kprobe;
+
+typedef unsigned int kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+#define MAX_INSN_SIZE 1
+
+#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
+
+#ifdef CONFIG_PPC64
+/*
+ * 64bit powerpc uses function descriptors.
+ * Handle cases where:
+ * 		- User passes a <.symbol> or <module:.symbol>
+ * 		- User passes a <symbol> or <module:symbol>
+ * 		- User passes a non-existant symbol, kallsyms_lookup_name
+ * 		  returns 0. Don't deref the NULL pointer in that case
+ */
+#define kprobe_lookup_name(name, addr)					\
+{									\
+	addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);		\
+	if (addr) {							\
+		char *colon;						\
+		if ((colon = strchr(name, ':')) != NULL) {		\
+			colon++;					\
+			if (*colon != '\0' && *colon != '.')		\
+				addr = *(kprobe_opcode_t **)addr;	\
+		} else if (name[0] != '.')				\
+			addr = *(kprobe_opcode_t **)addr;		\
+	} else {							\
+		char dot_name[KSYM_NAME_LEN];				\
+		dot_name[0] = '.';					\
+		dot_name[1] = '\0';					\
+		strncat(dot_name, name, KSYM_NAME_LEN - 2);		\
+		addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
+	}								\
+}
+
+#define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
+			IS_TWI(instr) || IS_TDI(instr))
+#else
+/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
+#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
+#endif
+
+#define flush_insn_slot(p)	do { } while (0)
+#define kretprobe_blacklist_size 0
+
+void kretprobe_trampoline(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t *insn;
+	/*
+	 * Set in kprobes code, initially to 0. If the instruction can be
+	 * eumulated, this is set to 1, if not, to -1.
+	 */
+	int boostable;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_msr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_msr;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+					unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KPROBES_H */
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
new file mode 100644
index 000000000000..f993e4198d5c
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <asm/types.h>
+
+struct kvm_regs {
+	__u64 pc;
+	__u64 cr;
+	__u64 ctr;
+	__u64 lr;
+	__u64 xer;
+	__u64 msr;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 pid;
+
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 sprg4;
+	__u64 sprg5;
+	__u64 sprg6;
+	__u64 sprg7;
+
+	__u64 gpr[32];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+	__u64 fpr[32];
+};
+
+#endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
new file mode 100644
index 000000000000..2197764796d9
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_ASM_H__
+#define __POWERPC_KVM_ASM_H__
+
+/* IVPR must be 64KiB-aligned. */
+#define VCPU_SIZE_ORDER 4
+#define VCPU_SIZE_LOG   (VCPU_SIZE_ORDER + 12)
+#define VCPU_TLB_PGSZ   PPC44x_TLB_64K
+#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG)
+
+#define BOOKE_INTERRUPT_CRITICAL 0
+#define BOOKE_INTERRUPT_MACHINE_CHECK 1
+#define BOOKE_INTERRUPT_DATA_STORAGE 2
+#define BOOKE_INTERRUPT_INST_STORAGE 3
+#define BOOKE_INTERRUPT_EXTERNAL 4
+#define BOOKE_INTERRUPT_ALIGNMENT 5
+#define BOOKE_INTERRUPT_PROGRAM 6
+#define BOOKE_INTERRUPT_FP_UNAVAIL 7
+#define BOOKE_INTERRUPT_SYSCALL 8
+#define BOOKE_INTERRUPT_AP_UNAVAIL 9
+#define BOOKE_INTERRUPT_DECREMENTER 10
+#define BOOKE_INTERRUPT_FIT 11
+#define BOOKE_INTERRUPT_WATCHDOG 12
+#define BOOKE_INTERRUPT_DTLB_MISS 13
+#define BOOKE_INTERRUPT_ITLB_MISS 14
+#define BOOKE_INTERRUPT_DEBUG 15
+#define BOOKE_MAX_INTERRUPT 15
+
+#define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
+#define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
+
+#define RESUME_GUEST            0
+#define RESUME_GUEST_NV         RESUME_FLAG_NV
+#define RESUME_HOST             RESUME_FLAG_HOST
+#define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
+
+#endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
new file mode 100644
index 000000000000..2655e2a4831e
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -0,0 +1,155 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_HOST_H__
+#define __POWERPC_KVM_HOST_H__
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <asm/kvm_asm.h>
+
+#define KVM_MAX_VCPUS 1
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+/* We don't currently support large pages. */
+#define KVM_PAGES_PER_HPAGE (1<<31)
+
+struct kvm;
+struct kvm_run;
+struct kvm_vcpu;
+
+struct kvm_vm_stat {
+	u32 remote_tlb_flush;
+};
+
+struct kvm_vcpu_stat {
+	u32 sum_exits;
+	u32 mmio_exits;
+	u32 dcr_exits;
+	u32 signal_exits;
+	u32 light_exits;
+	/* Account for special types of light exits: */
+	u32 itlb_real_miss_exits;
+	u32 itlb_virt_miss_exits;
+	u32 dtlb_real_miss_exits;
+	u32 dtlb_virt_miss_exits;
+	u32 syscall_exits;
+	u32 isi_exits;
+	u32 dsi_exits;
+	u32 emulated_inst_exits;
+	u32 dec_exits;
+	u32 ext_intr_exits;
+	u32 halt_wakeup;
+};
+
+struct tlbe {
+	u32 tid; /* Only the low 8 bits are used. */
+	u32 word0;
+	u32 word1;
+	u32 word2;
+};
+
+struct kvm_arch {
+};
+
+struct kvm_vcpu_arch {
+	/* Unmodified copy of the guest's TLB. */
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	/* TLB that's actually used when the guest is running. */
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+	/* Pages which are referenced in the shadow TLB. */
+	struct page *shadow_pages[PPC44x_TLB_SIZE];
+	/* Copy of the host's TLB. */
+	struct tlbe host_tlb[PPC44x_TLB_SIZE];
+
+	u32 host_stack;
+	u32 host_pid;
+
+	u64 fpr[32];
+	u32 gpr[32];
+
+	u32 pc;
+	u32 cr;
+	u32 ctr;
+	u32 lr;
+	u32 xer;
+
+	u32 msr;
+	u32 mmucr;
+	u32 sprg0;
+	u32 sprg1;
+	u32 sprg2;
+	u32 sprg3;
+	u32 sprg4;
+	u32 sprg5;
+	u32 sprg6;
+	u32 sprg7;
+	u32 srr0;
+	u32 srr1;
+	u32 csrr0;
+	u32 csrr1;
+	u32 dsrr0;
+	u32 dsrr1;
+	u32 dear;
+	u32 esr;
+	u32 dec;
+	u32 decar;
+	u32 tbl;
+	u32 tbu;
+	u32 tcr;
+	u32 tsr;
+	u32 ivor[16];
+	u32 ivpr;
+	u32 pir;
+	u32 pid;
+	u32 pvr;
+	u32 ccr0;
+	u32 ccr1;
+	u32 dbcr0;
+	u32 dbcr1;
+
+	u32 last_inst;
+	u32 fault_dear;
+	u32 fault_esr;
+	gpa_t paddr_accessed;
+
+	u8 io_gpr; /* GPR used as IO source/target */
+	u8 mmio_is_bigendian;
+	u8 dcr_needed;
+	u8 dcr_is_write;
+
+	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
+
+	struct timer_list dec_timer;
+	unsigned long pending_exceptions;
+};
+
+struct kvm_guest_debug {
+	int enabled;
+	unsigned long bp[4];
+	int singlestep;
+};
+
+#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
new file mode 100644
index 000000000000..2d48f6a63d0b
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -0,0 +1,37 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PARA_H__
+#define __POWERPC_KVM_PARA_H__
+
+#ifdef __KERNEL__
+
+static inline int kvm_para_available(void)
+{
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
new file mode 100644
index 000000000000..a8b068792260
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -0,0 +1,95 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PPC_H__
+#define __POWERPC_KVM_PPC_H__
+
+/* This file exists just so we can dereference kvm_vcpu, avoiding nested header
+ * dependencies. */
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <linux/kvm_host.h>
+
+struct kvm_tlb {
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+};
+
+enum emulation_result {
+	EMULATE_DONE,         /* no further processing */
+	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
+	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
+	EMULATE_FAIL,         /* can't emulate this instruction */
+};
+
+extern const unsigned char exception_priority[];
+extern const unsigned char priority_exception[];
+
+extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+extern char kvmppc_handlers_start[];
+extern unsigned long kvmppc_handler_len;
+
+extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
+extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                              unsigned int rt, unsigned int bytes,
+                              int is_bigendian);
+extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                               u32 val, unsigned int bytes, int is_bigendian);
+
+extern int kvmppc_emulate_instruction(struct kvm_run *run,
+                                      struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
+
+extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
+                           u64 asid, u32 flags);
+extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                                  gva_t eend, u32 asid);
+extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
+
+extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
+
+static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	set_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	clear_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+/* Helper function for "full" MSR writes. No need to call this if only EE is
+ * changing. */
+static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
+{
+	if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
+		kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
+
+	vcpu->arch.msr = new_msr;
+
+	if (vcpu->arch.msr & MSR_WE)
+		kvm_vcpu_block(vcpu);
+}
+
+#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
new file mode 100644
index 000000000000..4d8518049f4d
--- /dev/null
+++ b/arch/powerpc/include/asm/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
+#define __ASM_POWERPC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD	0x1F0
+#define ATA_PRIMARY_CTL	0x3F6
+#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
+
+#define ATA_SECONDARY_CMD	0x170
+#define ATA_SECONDARY_CTL	0x376
+#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
+
+#endif
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
new file mode 100644
index 000000000000..e1c4ac1cc4ba
--- /dev/null
+++ b/arch/powerpc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_LINKAGE_H
+#define _ASM_POWERPC_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif	/* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
new file mode 100644
index 000000000000..6f5fdf0a19ae
--- /dev/null
+++ b/arch/powerpc/include/asm/lmb.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_LMB_H
+#define _ASM_POWERPC_LMB_H
+
+#include <asm/udbg.h>
+
+#define LMB_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define LMB_REAL_LIMIT	lowmem_end_addr
+#else
+#define LMB_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
new file mode 100644
index 000000000000..612d83276653
--- /dev/null
+++ b/arch/powerpc/include/asm/local.h
@@ -0,0 +1,200 @@
+#ifndef _ARCH_POWERPC_LOCAL_H
+#define _ARCH_POWERPC_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
+
+#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+
+static __inline__ long local_add_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_add_negative(a, l)	(local_add_return((a), (l)) < 0)
+
+static __inline__ long local_sub_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ long local_inc_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+static __inline__ long local_dec_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+static __inline__ int local_add_unless(local_t *l, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b \n"
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&(l->a.counter)), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_sub_and_test(a, l)	(local_sub_return((a), (l)) == 0)
+#define local_dec_and_test(l)		(local_dec_return((l)) == 0)
+
+/*
+ * Atomically test *l and decrement if it is greater than 0.
+ * The function returns the old value of *l minus 1.
+ */
+static __inline__ long local_dec_if_positive(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i,l)	((l)->a.counter+=(i))
+#define __local_sub(i,l)	((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)	 	\
+	({ local_t res__;		\
+	   preempt_disable(); 		\
+	   res__ = (l);			\
+	   preempt_enable();		\
+	   res__; })
+#define cpu_local_wrap(l)		\
+	({ preempt_disable();		\
+	   l;				\
+	   preempt_enable(); })		\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l)	cpu_local_inc(l)
+#define __cpu_local_dec(l)	cpu_local_dec(l)
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
new file mode 100644
index 000000000000..2fe268b10333
--- /dev/null
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -0,0 +1,159 @@
+/*
+ * lppaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_LPPACA_H
+#define _ASM_POWERPC_LPPACA_H
+#ifdef __KERNEL__
+
+//=============================================================================
+//
+//	This control block contains the data that is shared between the
+//	hypervisor (PLIC) and the OS.
+//
+//
+//----------------------------------------------------------------------------
+#include <linux/cache.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+
+/* The Hypervisor barfs if the lppaca crosses a page boundary.  A 1k
+ * alignment is sufficient to prevent this */
+struct lppaca {
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+// NOTE: The xDynXyz fields are fields that will be dynamically changed by
+// PLIC when preparing to bring a processor online or when dispatching a
+// virtual processor!
+//=============================================================================
+	u32	desc;			// Eye catcher 0xD397D781	x00-x03
+	u16	size;			// Size of this struct		x04-x05
+	u16	reserved1;		// Reserved			x06-x07
+	u16	reserved2:14;		// Reserved			x08-x09
+	u8	shared_proc:1;		// Shared processor indicator	...
+	u8	secondary_thread:1;	// Secondary thread indicator	...
+	volatile u8 dyn_proc_status:8;	// Dynamic Status of this proc	x0A-x0A
+	u8	secondary_thread_count;	// Secondary thread count	x0B-x0B
+	volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
+	volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
+	u32	decr_val;   		// Value for Decr programming 	x10-x13
+	u32	pmc_val;       		// Value for PMC regs         	x14-x17
+	volatile u32 dyn_hw_node_id;	// Dynamic Hardware Node id	x18-x1B
+	volatile u32 dyn_hw_proc_id;	// Dynamic Hardware Proc Id	x1C-x1F
+	volatile u32 dyn_pir;		// Dynamic ProcIdReg value	x20-x23
+	u32	dsei_data;           	// DSEI data                  	x24-x27
+	u64	sprg3;               	// SPRG3 value                	x28-x2F
+	u8	reserved3[80];		// Reserved			x30-x7F
+
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+	// This Dword contains a byte for each type of interrupt that can occur.
+	// The IPI is a count while the others are just a binary 1 or 0.
+	union {
+		u64	any_int;
+		struct {
+			u16	reserved;	// Reserved - cleared by #mpasmbl
+			u8	xirr_int;	// Indicates xXirrValue is valid or Immed IO
+			u8	ipi_cnt;	// IPI Count
+			u8	decr_int;	// DECR interrupt occurred
+			u8	pdc_int;	// PDC interrupt occurred
+			u8	quantum_int;	// Interrupt quantum reached
+			u8	old_plic_deferred_ext_int;	// Old PLIC has a deferred XIRR pending
+		} fields;
+	} int_dword;
+
+	// Whenever any fields in this Dword are set then PLIC will defer the
+	// processing of external interrupts.  Note that PLIC will store the
+	// XIRR directly into the xXirrValue field so that another XIRR will
+	// not be presented until this one clears.  The layout of the low
+	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+	// entire Dword is zero or not.  A non-zero value in the low order
+	// 2-bytes will result in SLIC being granted the highest thread
+	// priority upon return.  A 0 will return to SLIC as medium priority.
+	u64	plic_defer_ints_area;	// Entire Dword
+
+	// Used to pass the real SRR0/1 from PLIC to SLIC as well as to
+	// pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
+	u64	saved_srr0;		// Saved SRR0                   x10-x17
+	u64	saved_srr1;		// Saved SRR1                   x18-x1F
+
+	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
+	u64	saved_gpr3;		// Saved GPR3                   x20-x27
+	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
+	u64	saved_gpr5;		// Saved GPR5                   x30-x37
+
+	u8	reserved4;		// Reserved			x38-x38
+	u8	donate_dedicated_cpu;	// Donate dedicated CPU cycles  x39-x39
+	u8	fpregs_in_use;		// FP regs in use               x3A-x3A
+	u8	pmcregs_in_use;		// PMC regs in use              x3B-x3B
+	volatile u32 saved_decr;	// Saved Decr Value             x3C-x3F
+	volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
+	volatile u64 cur_plic_latency;	// Unaccounted PLIC latency     x48-x4F
+	u64	tot_plic_latency;	// Accumulated PLIC latency     x50-x57
+	u64	wait_state_cycles;	// Wait cycles for this proc    x58-x5F
+	u64	end_of_quantum;		// TB at end of quantum         x60-x67
+	u64	pdc_saved_sprg1;	// Saved SPRG1 for PMC int      x68-x6F
+	u64	pdc_saved_srr0;		// Saved SRR0 for PMC int       x70-x77
+	volatile u32 virtual_decr;	// Virtual DECR for shared procsx78-x7B
+	u16	slb_count;		// # of SLBs to maintain        x7C-x7D
+	u8	idle;			// Indicate OS is idle          x7E
+	u8	vmxregs_in_use;		// VMX registers in use         x7F
+
+
+//=============================================================================
+// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors
+//=============================================================================
+	// This is the yield_count.  An "odd" value (low bit on) means that
+	// the processor is yielded (either because of an OS yield or a PLIC
+	// preempt).  An even value implies that the processor is currently
+	// executing.
+	// NOTE: This value will ALWAYS be zero for dedicated processors and
+	// will NEVER be zero for shared processors (ie, initialized to a 1).
+	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
+	u32 reserved6;
+	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
+	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
+	u8	reserved7[104];		// Reserved                     x18-x7F
+
+//=============================================================================
+// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
+//=============================================================================
+	u8	pmc_save_area[256];	// PMC interrupt Area           x00-xFF
+} __attribute__((__aligned__(0x400)));
+
+extern struct lppaca lppaca[];
+
+/*
+ * SLB shadow buffer structure as defined in the PAPR.  The save_area
+ * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
+ * ESID is stored in the lower 64bits, then the VSID.
+ */
+struct slb_shadow {
+	u32	persistent;		// Number of persistent SLBs	x00-x03
+	u32	buffer_length;		// Total shadow buffer length	x04-x07
+	u64	reserved;		// Alignment			x08-x0f
+	struct	{
+		u64     esid;
+		u64	vsid;
+	} save_area[SLB_NUM_BOLTED];	//				x10-x40
+} ____cacheline_aligned;
+
+extern struct slb_shadow slb_shadow[];
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
new file mode 100644
index 000000000000..81713acf7529
--- /dev/null
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -0,0 +1,348 @@
+/*
+ *  PS3 hvcall interface.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2003, 2004 (c) MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_LV1CALL_H)
+#define _ASM_POWERPC_LV1CALL_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/types.h>
+
+/* lv1 call declaration macros */
+
+#define LV1_1_IN_ARG_DECL u64 in_1
+#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2
+#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3
+#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4
+#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5
+#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6
+#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7
+#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8
+#define LV1_1_OUT_ARG_DECL u64 *out_1
+#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2
+#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3
+#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4
+#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5
+#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6
+#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7
+
+#define LV1_0_IN_0_OUT_ARG_DECL void
+#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL
+#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL
+#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL
+#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL
+#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL
+#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL
+#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL
+
+#define LV1_0_IN_1_OUT_ARG_DECL                    LV1_1_OUT_ARG_DECL
+#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+
+#define LV1_0_IN_2_OUT_ARG_DECL                    LV1_2_OUT_ARG_DECL
+#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+
+#define LV1_0_IN_3_OUT_ARG_DECL                    LV1_3_OUT_ARG_DECL
+#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+
+#define LV1_0_IN_4_OUT_ARG_DECL                    LV1_4_OUT_ARG_DECL
+#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+
+#define LV1_0_IN_5_OUT_ARG_DECL                    LV1_5_OUT_ARG_DECL
+#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+
+#define LV1_0_IN_6_OUT_ARG_DECL                    LV1_6_OUT_ARG_DECL
+#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+
+#define LV1_0_IN_7_OUT_ARG_DECL                    LV1_7_OUT_ARG_DECL
+#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+
+#define LV1_1_IN_ARGS in_1
+#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2
+#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3
+#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4
+#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5
+#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6
+#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7
+#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8
+
+#define LV1_1_OUT_ARGS out_1
+#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2
+#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3
+#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4
+#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5
+#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6
+#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7
+
+#define LV1_0_IN_0_OUT_ARGS
+#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS
+#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS
+#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS
+#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS
+#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS
+#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS
+#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS
+
+#define LV1_0_IN_1_OUT_ARGS                LV1_1_OUT_ARGS
+#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS
+
+#define LV1_0_IN_2_OUT_ARGS                LV1_2_OUT_ARGS
+#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS
+
+#define LV1_0_IN_3_OUT_ARGS                LV1_3_OUT_ARGS
+#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS
+
+#define LV1_0_IN_4_OUT_ARGS                LV1_4_OUT_ARGS
+#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS
+
+#define LV1_0_IN_5_OUT_ARGS                LV1_5_OUT_ARGS
+#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS
+
+#define LV1_0_IN_6_OUT_ARGS                LV1_6_OUT_ARGS
+#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS
+
+#define LV1_0_IN_7_OUT_ARGS                LV1_7_OUT_ARGS
+#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS
+
+/*
+ * This LV1_CALL() macro is for use by callers.  It expands into an
+ * inline call wrapper and an underscored HV call declaration.  The
+ * wrapper can be used to instrument the lv1 call interface.  The
+ * file lv1call.S defines its own LV1_CALL() macro to expand into
+ * the actual underscored call definition.
+ */
+
+#if !defined(LV1_CALL)
+#define LV1_CALL(name, in, out, num)                               \
+  extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL);      \
+  static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \
+    {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
+#endif
+
+#endif /* !defined(__ASSEMBLY__) */
+
+/* lv1 call table */
+
+LV1_CALL(allocate_memory,                               4, 2,   0 )
+LV1_CALL(write_htab_entry,                              4, 0,   1 )
+LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
+LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
+LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
+LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
+LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
+LV1_CALL(pause,                                         1, 0,   9 )
+LV1_CALL(destruct_virtual_address_space,                1, 0,  10 )
+LV1_CALL(configure_irq_state_bitmap,                    3, 0,  11 )
+LV1_CALL(connect_irq_plug_ext,                          5, 0,  12 )
+LV1_CALL(release_memory,                                1, 0,  13 )
+LV1_CALL(put_iopte,                                     5, 0,  15 )
+LV1_CALL(disconnect_irq_plug_ext,                       3, 0,  17 )
+LV1_CALL(construct_event_receive_port,                  0, 1,  18 )
+LV1_CALL(destruct_event_receive_port,                   1, 0,  19 )
+LV1_CALL(send_event_locally,                            1, 0,  24 )
+LV1_CALL(end_of_interrupt,                              1, 0,  27 )
+LV1_CALL(connect_irq_plug,                              2, 0,  28 )
+LV1_CALL(disconnect_irq_plug,                           1, 0,  29 )
+LV1_CALL(end_of_interrupt_ext,                          3, 0,  30 )
+LV1_CALL(did_update_interrupt_mask,                     2, 0,  31 )
+LV1_CALL(shutdown_logical_partition,                    1, 0,  44 )
+LV1_CALL(destruct_logical_spe,                          1, 0,  54 )
+LV1_CALL(construct_logical_spe,                         7, 6,  57 )
+LV1_CALL(set_spe_interrupt_mask,                        3, 0,  61 )
+LV1_CALL(set_spe_transition_notifier,                   3, 0,  64 )
+LV1_CALL(disable_logical_spe,                           2, 0,  65 )
+LV1_CALL(clear_spe_interrupt_status,                    4, 0,  66 )
+LV1_CALL(get_spe_interrupt_status,                      2, 1,  67 )
+LV1_CALL(get_logical_ppe_id,                            0, 1,  69 )
+LV1_CALL(set_interrupt_mask,                            5, 0,  73 )
+LV1_CALL(get_logical_partition_id,                      0, 1,  74 )
+LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
+LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
+LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
+LV1_CALL(create_repository_node,                        6, 0,  90 )
+LV1_CALL(get_repository_node_value,                     5, 2,  91 )
+LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
+LV1_CALL(remove_repository_node,                        4, 0,  93 )
+LV1_CALL(read_htab_entries,                             2, 5,  95 )
+LV1_CALL(set_dabr,                                      2, 0,  96 )
+LV1_CALL(get_total_execution_time,                      2, 1, 103 )
+LV1_CALL(allocate_io_segment,                           3, 1, 116 )
+LV1_CALL(release_io_segment,                            2, 0, 117 )
+LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
+LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
+LV1_CALL(map_htab,                                      1, 1, 122 )
+LV1_CALL(unmap_htab,                                    1, 0, 123 )
+LV1_CALL(get_version_info,                              0, 1, 127 )
+LV1_CALL(insert_htab_entry,                             6, 3, 158 )
+LV1_CALL(read_virtual_uart,                             3, 1, 162 )
+LV1_CALL(write_virtual_uart,                            3, 1, 163 )
+LV1_CALL(set_virtual_uart_param,                        3, 0, 164 )
+LV1_CALL(get_virtual_uart_param,                        2, 1, 165 )
+LV1_CALL(configure_virtual_uart_irq,                    1, 1, 166 )
+LV1_CALL(open_device,                                   3, 0, 170 )
+LV1_CALL(close_device,                                  2, 0, 171 )
+LV1_CALL(map_device_mmio_region,                        5, 1, 172 )
+LV1_CALL(unmap_device_mmio_region,                      3, 0, 173 )
+LV1_CALL(allocate_device_dma_region,                    5, 1, 174 )
+LV1_CALL(free_device_dma_region,                        3, 0, 175 )
+LV1_CALL(map_device_dma_region,                         6, 0, 176 )
+LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
+LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
+LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
+LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
+LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
+LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
+LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
+LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
+LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
+LV1_CALL(net_control,                                   6, 2, 194 )
+LV1_CALL(connect_interrupt_event_receive_port,          4, 0, 197 )
+LV1_CALL(disconnect_interrupt_event_receive_port,       4, 0, 198 )
+LV1_CALL(get_spe_all_interrupt_statuses,                1, 1, 199 )
+LV1_CALL(deconfigure_virtual_uart_irq,                  0, 0, 202 )
+LV1_CALL(enable_logical_spe,                            2, 0, 207 )
+LV1_CALL(gpu_open,                                      1, 0, 210 )
+LV1_CALL(gpu_close,                                     0, 0, 211 )
+LV1_CALL(gpu_device_map,                                1, 2, 212 )
+LV1_CALL(gpu_device_unmap,                              1, 0, 213 )
+LV1_CALL(gpu_memory_allocate,                           5, 2, 214 )
+LV1_CALL(gpu_memory_free,                               1, 0, 216 )
+LV1_CALL(gpu_context_allocate,                          2, 5, 217 )
+LV1_CALL(gpu_context_free,                              1, 0, 218 )
+LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
+LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
+LV1_CALL(gpu_context_intr,                              1, 1, 227 )
+LV1_CALL(gpu_attribute,                                 5, 0, 228 )
+LV1_CALL(get_rtc,                                       0, 2, 232 )
+LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
+LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
+LV1_CALL(stop_ppe_periodic_tracer,                      1, 1, 242 )
+LV1_CALL(storage_read,                                  6, 1, 245 )
+LV1_CALL(storage_write,                                 6, 1, 246 )
+LV1_CALL(storage_send_device_command,                   6, 1, 248 )
+LV1_CALL(storage_get_async_status,                      1, 2, 249 )
+LV1_CALL(storage_check_async_status,                    2, 1, 254 )
+LV1_CALL(panic,                                         1, 0, 255 )
+LV1_CALL(construct_lpm,                                 6, 3, 140 )
+LV1_CALL(destruct_lpm,                                  1, 0, 141 )
+LV1_CALL(start_lpm,                                     1, 0, 142 )
+LV1_CALL(stop_lpm,                                      1, 1, 143 )
+LV1_CALL(copy_lpm_trace_buffer,                         3, 1, 144 )
+LV1_CALL(add_lpm_event_bookmark,                        5, 0, 145 )
+LV1_CALL(delete_lpm_event_bookmark,                     3, 0, 146 )
+LV1_CALL(set_lpm_interrupt_mask,                        3, 1, 147 )
+LV1_CALL(get_lpm_interrupt_status,                      1, 1, 148 )
+LV1_CALL(set_lpm_general_control,                       5, 2, 149 )
+LV1_CALL(set_lpm_interval,                              3, 1, 150 )
+LV1_CALL(set_lpm_trigger_control,                       3, 1, 151 )
+LV1_CALL(set_lpm_counter_control,                       4, 1, 152 )
+LV1_CALL(set_lpm_group_control,                         3, 1, 153 )
+LV1_CALL(set_lpm_debug_bus_control,                     3, 1, 154 )
+LV1_CALL(set_lpm_counter,                               5, 2, 155 )
+LV1_CALL(set_lpm_signal,                                7, 0, 156 )
+LV1_CALL(set_lpm_spr_trigger,                           2, 0, 157 )
+
+#endif
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
new file mode 100644
index 000000000000..893aafd87fde
--- /dev/null
+++ b/arch/powerpc/include/asm/machdep.h
@@ -0,0 +1,365 @@
+#ifndef _ASM_POWERPC_MACHDEP_H
+#define _ASM_POWERPC_MACHDEP_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/setup.h>
+
+/* We export this macro for external modules like Alsa to know if
+ * ppc_md.feature_call is implemented or not
+ */
+#define CONFIG_PPC_HAS_FEATURE_CALLS
+
+struct pt_regs;
+struct pci_bus;	
+struct device_node;
+struct iommu_table;
+struct rtc_time;
+struct file;
+struct pci_controller;
+#ifdef CONFIG_KEXEC
+struct kimage;
+#endif
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+	void  (*message_pass)(int target, int msg);
+	int   (*probe)(void);
+	void  (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_enable)(unsigned int nr);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+#endif
+
+struct machdep_calls {
+	char		*name;
+#ifdef CONFIG_PPC64
+	void            (*hpte_invalidate)(unsigned long slot,
+					   unsigned long va,
+					   int psize, int ssize,
+					   int local);
+	long		(*hpte_updatepp)(unsigned long slot, 
+					 unsigned long newpp, 
+					 unsigned long va,
+					 int psize, int ssize,
+					 int local);
+	void            (*hpte_updateboltedpp)(unsigned long newpp, 
+					       unsigned long ea,
+					       int psize, int ssize);
+	long		(*hpte_insert)(unsigned long hpte_group,
+				       unsigned long va,
+				       unsigned long prpn,
+				       unsigned long rflags,
+				       unsigned long vflags,
+				       int psize, int ssize);
+	long		(*hpte_remove)(unsigned long hpte_group);
+	void            (*hpte_removebolted)(unsigned long ea,
+					     int psize, int ssize);
+	void		(*flush_hash_range)(unsigned long number, int local);
+
+	/* special for kexec, to be called in real mode, linar mapping is
+	 * destroyed as well */
+	void		(*hpte_clear_all)(void);
+
+	int		(*tce_build)(struct iommu_table *tbl,
+				     long index,
+				     long npages,
+				     unsigned long uaddr,
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs);
+	void		(*tce_free)(struct iommu_table *tbl,
+				    long index,
+				    long npages);
+	unsigned long	(*tce_get)(struct iommu_table *tbl,
+				    long index);
+	void		(*tce_flush)(struct iommu_table *tbl);
+	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
+	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
+
+	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
+				   unsigned long flags);
+	void		(*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+	void		(*iommu_save)(void);
+	void		(*iommu_restore)(void);
+#endif
+#endif /* CONFIG_PPC64 */
+
+	int		(*probe)(void);
+	void		(*setup_arch)(void); /* Optional, may be NULL */
+	void		(*init_early)(void);
+	/* Optional, may be NULL. */
+	void		(*show_cpuinfo)(struct seq_file *m);
+	void		(*show_percpuinfo)(struct seq_file *m, int i);
+
+	void		(*init_IRQ)(void);
+	unsigned int	(*get_irq)(void);
+#ifdef CONFIG_KEXEC
+	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
+#endif
+
+	/* PCI stuff */
+	/* Called after scanning the bus, before allocating resources */
+	void		(*pcibios_fixup)(void);
+	int		(*pci_probe_mode)(struct pci_bus *);
+	void		(*pci_irq_fixup)(struct pci_dev *dev);
+
+	/* To setup PHBs when using automatic OF platform driver for PCI */
+	int		(*pci_setup_phb)(struct pci_controller *host);
+
+#ifdef CONFIG_PCI_MSI
+	int		(*msi_check_device)(struct pci_dev* dev,
+					    int nvec, int type);
+	int		(*setup_msi_irqs)(struct pci_dev *dev,
+					  int nvec, int type);
+	void		(*teardown_msi_irqs)(struct pci_dev *dev);
+#endif
+
+	void		(*restart)(char *cmd);
+	void		(*power_off)(void);
+	void		(*halt)(void);
+	void		(*panic)(char *str);
+	void		(*cpu_die)(void);
+
+	long		(*time_init)(void); /* Optional, may be NULL */
+
+	int		(*set_rtc_time)(struct rtc_time *);
+	void		(*get_rtc_time)(struct rtc_time *);
+	unsigned long	(*get_boot_time)(void);
+	unsigned char 	(*rtc_read_val)(int addr);
+	void		(*rtc_write_val)(int addr, unsigned char val);
+
+	void		(*calibrate_decr)(void);
+
+	void		(*progress)(char *, unsigned short);
+
+	/* Interface for platform error logging */
+	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
+
+	unsigned char 	(*nvram_read_val)(int addr);
+	void		(*nvram_write_val)(int addr, unsigned char val);
+	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
+	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
+	ssize_t		(*nvram_size)(void);		
+	void		(*nvram_sync)(void);
+
+	/* Exception handlers */
+	int		(*system_reset_exception)(struct pt_regs *regs);
+	int 		(*machine_check_exception)(struct pt_regs *regs);
+
+	/* Motherboard/chipset features. This is a kind of general purpose
+	 * hook used to control some machine specific features (like reset
+	 * lines, chip power control, etc...).
+	 */
+	long	 	(*feature_call)(unsigned int feature, ...);
+
+	/* Get legacy PCI/IDE interrupt mapping */ 
+	int		(*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
+	
+	/* Get access protection for /dev/mem */
+	pgprot_t	(*phys_mem_access_prot)(struct file *file,
+						unsigned long pfn,
+						unsigned long size,
+						pgprot_t vma_prot);
+
+	/* Idle loop for this platform, leave empty for default idle loop */
+	void		(*idle_loop)(void);
+
+	/*
+	 * Function for waiting for work with reduced power in idle loop;
+	 * called with interrupts disabled.
+	 */
+	void		(*power_save)(void);
+
+	/* Function to enable performance monitor counters for this
+	   platform, called once per cpu. */
+	void		(*enable_pmcs)(void);
+
+	/* Set DABR for this platform, leave empty for default implemenation */
+	int		(*set_dabr)(unsigned long dabr);
+
+#ifdef CONFIG_PPC32	/* XXX for now */
+	/* A general init function, called by ppc_init in init/main.c.
+	   May be NULL. */
+	void		(*init)(void);
+
+	void		(*kgdb_map_scc)(void);
+
+	/*
+	 * optional PCI "hooks"
+	 */
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
+	/* Called at then very end of pcibios_init() */
+	void (*pcibios_after_init)(void);
+
+#endif /* CONFIG_PPC32 */
+
+	/* Called after PPC generic resource fixup to perform
+	   machine specific fixups */
+	void (*pcibios_fixup_resources)(struct pci_dev *);
+
+	/* Called for each PCI bus in the system when it's probed */
+	void (*pcibios_fixup_bus)(struct pci_bus *);
+
+	/* Called when pci_enable_device() is called. Returns 0 to
+	 * allow assignment/enabling of the device. */
+	int  (*pcibios_enable_device_hook)(struct pci_dev *);
+
+	/* Called to shutdown machine specific hardware not already controlled
+	 * by other drivers.
+	 */
+	void (*machine_shutdown)(void);
+
+#ifdef CONFIG_KEXEC
+	/* Called to do the minimal shutdown needed to run a kexec'd kernel
+	 * to run successfully.
+	 * XXX Should we move this one out of kexec scope?
+	 */
+	void (*machine_crash_shutdown)(struct pt_regs *regs);
+
+	/* Called to do what every setup is needed on image and the
+	 * reboot code buffer. Returns 0 on success.
+	 * Provide your own (maybe dummy) implementation if your platform
+	 * claims to support kexec.
+	 */
+	int (*machine_kexec_prepare)(struct kimage *image);
+
+	/* Called to handle any machine specific cleanup on image */
+	void (*machine_kexec_cleanup)(struct kimage *image);
+
+	/* Called to perform the _real_ kexec.
+	 * Do NOT allocate memory or fail here. We are past the point of
+	 * no return.
+	 */
+	void (*machine_kexec)(struct kimage *image);
+#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_SUSPEND
+	/* These are called to disable and enable, respectively, IRQs when
+	 * entering a suspend state.  If NULL, then the generic versions
+	 * will be called.  The generic versions disable/enable the
+	 * decrementer along with interrupts.
+	 */
+	void (*suspend_disable_irqs)(void);
+	void (*suspend_enable_irqs)(void);
+#endif
+};
+
+extern void e500_idle(void);
+extern void power4_idle(void);
+extern void power4_cpu_offline_powersave(void);
+extern void ppc6xx_idle(void);
+
+/*
+ * ppc_md contains a copy of the machine description structure for the
+ * current platform. machine_id contains the initial address where the
+ * description was found during boot.
+ */
+extern struct machdep_calls ppc_md;
+extern struct machdep_calls *machine_id;
+
+#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
+
+#define define_machine(name)					\
+	extern struct machdep_calls mach_##name;		\
+	EXPORT_SYMBOL(mach_##name);				\
+	struct machdep_calls mach_##name __machine_desc =
+
+#define machine_is(name) \
+	({ \
+		extern struct machdep_calls mach_##name \
+			__attribute__((weak));		 \
+		machine_id == &mach_##name; \
+	})
+
+extern void probe_machine(void);
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * Power macintoshes have either a CUDA, PMU or SMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+	SYS_CTRLER_UNKNOWN = 0,
+	SYS_CTRLER_CUDA = 1,
+	SYS_CTRLER_PMU = 2,
+	SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+extern sys_ctrler_t sys_ctrler;
+
+#endif /* CONFIG_PPC_PMAC */
+
+extern void setup_pci_ptrs(void);
+
+#ifdef CONFIG_SMP
+/* Poor default implementations */
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
+#endif /* CONFIG_SMP */
+
+
+/* Functions to produce codes on the leds.
+ * The SRC code should be unique for the message category and should
+ * be limited to the lower 24 bits (the upper 8 are set by these funcs),
+ * and (for boot & dump) should be sorted numerically in the order
+ * the events occur.
+ */
+/* Print a boot progress message. */
+void ppc64_boot_msg(unsigned int src, const char *msg);
+/* Print a termination message (print only -- does not stop the kernel) */
+void ppc64_terminate_msg(unsigned int src, const char *msg);
+
+static inline void log_error(char *buf, unsigned int err_type, int fatal)
+{
+	if (ppc_md.log_error)
+		ppc_md.log_error(buf, err_type, fatal);
+}
+
+#define __define_machine_initcall(mach,level,fn,id) \
+	static int __init __machine_initcall_##mach##_##fn(void) { \
+		if (machine_is(mach)) return fn(); \
+		return 0; \
+	} \
+	__define_initcall(level,__machine_initcall_##mach##_##fn,id);
+
+#define machine_core_initcall(mach,fn)		__define_machine_initcall(mach,"1",fn,1)
+#define machine_core_initcall_sync(mach,fn)	__define_machine_initcall(mach,"1s",fn,1s)
+#define machine_postcore_initcall(mach,fn)	__define_machine_initcall(mach,"2",fn,2)
+#define machine_postcore_initcall_sync(mach,fn)	__define_machine_initcall(mach,"2s",fn,2s)
+#define machine_arch_initcall(mach,fn)		__define_machine_initcall(mach,"3",fn,3)
+#define machine_arch_initcall_sync(mach,fn)	__define_machine_initcall(mach,"3s",fn,3s)
+#define machine_subsys_initcall(mach,fn)	__define_machine_initcall(mach,"4",fn,4)
+#define machine_subsys_initcall_sync(mach,fn)	__define_machine_initcall(mach,"4s",fn,4s)
+#define machine_fs_initcall(mach,fn)		__define_machine_initcall(mach,"5",fn,5)
+#define machine_fs_initcall_sync(mach,fn)	__define_machine_initcall(mach,"5s",fn,5s)
+#define machine_rootfs_initcall(mach,fn)	__define_machine_initcall(mach,"rootfs",fn,rootfs)
+#define machine_device_initcall(mach,fn)	__define_machine_initcall(mach,"6",fn,6)
+#define machine_device_initcall_sync(mach,fn)	__define_machine_initcall(mach,"6s",fn,6s)
+#define machine_late_initcall(mach,fn)		__define_machine_initcall(mach,"7",fn,7)
+#define machine_late_initcall_sync(mach,fn)	__define_machine_initcall(mach,"7s",fn,7s)
+
+void generic_suspend_disable_irqs(void);
+void generic_suspend_enable_irqs(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
new file mode 100644
index 000000000000..079c06eae446
--- /dev/null
+++ b/arch/powerpc/include/asm/macio.h
@@ -0,0 +1,142 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+#ifdef __KERNEL__
+
+#include <linux/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES	8
+#define MACIO_DEV_COUNT_IRQS		8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+	struct macio_chip	*chip;		/* macio_chip (private use) */
+	int			index;		/* macio chip index in system */
+#ifdef CONFIG_PCI
+	struct pci_dev		*pdev;		/* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+	struct macio_bus	*bus;		/* macio bus this device is on */
+	struct macio_dev	*media_bay;	/* Device is part of a media bay */
+	struct of_device	ofdev;
+	int			n_resources;
+	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
+	int			n_interrupts;
+	struct resource		interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define	to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define	of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+	return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+	struct resource *res = &dev->resource[resource_no];
+	if (res->start == 0 || res->end == 0 || res->end < res->start)
+		return 0;
+	return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+	return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+	return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+	return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+	return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+	return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+	char			*name;
+	struct of_device_id	*match_table;
+	struct module		*owner;
+
+	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
+	int	(*remove)(struct macio_dev* dev);
+
+	int	(*suspend)(struct macio_dev* dev, pm_message_t state);
+	int	(*resume)(struct macio_dev* dev);
+	int	(*shutdown)(struct macio_dev* dev);
+
+	struct device_driver	driver;
+};
+#define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __KERNEL__ */
+#endif /* __MACIO_ASIC_H__ */
diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..f2741c8b59a1
--- /dev/null
+++ b/arch/powerpc/include/asm/mc146818rtc.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_MC146818RTC_H
+#define _ASM_POWERPC_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MC146818RTC_H */
diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h
new file mode 100644
index 000000000000..b2efb3325808
--- /dev/null
+++ b/arch/powerpc/include/asm/mediabay.h
@@ -0,0 +1,43 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD		0	/* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1		1	/* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND	2	/* sound device ? */
+#define MB_CD		3	/* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI		5	/* media bay contains a PCI device */
+#define MB_POWER	6	/* media bay contains a Power device (???) */
+#define MB_NO		7	/* media bay contains nothing */
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+#include <linux/ide.h>
+
+int check_media_bay_by_base(unsigned long base, int what);
+/* called by IDE PMAC host driver to register IDE controller for media bay */
+int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
+			    int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+	return -ENODEV;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
new file mode 100644
index 000000000000..9209f755763e
--- /dev/null
+++ b/arch/powerpc/include/asm/mman.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMAN_H
+#define _ASM_POWERPC_MMAN_H
+
+#include <asm-generic/mman.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define PROT_SAO	0x10		/* Strong Access Ordering */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#include <asm/cputable.h>
+#include <linux/mm.h>
+
+/*
+ * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
+ * here.  How important is the optimization?
+ */
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
+{
+	return (prot & PROT_SAO) ? VM_SAO : 0;
+}
+#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
+
+static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
+{
+	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+}
+#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
+
+static inline int arch_validate_prot(unsigned long prot)
+{
+	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
+		return 0;
+	if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
+		return 0;
+	return 1;
+}
+#define arch_validate_prot(prot) arch_validate_prot(prot)
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MMAN_H */
diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
new file mode 100644
index 000000000000..3d108676584c
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMU_40X_H_
+#define _ASM_POWERPC_MMU_40X_H_
+
+/*
+ * PPC40x support
+ */
+
+#define PPC40X_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion.  On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define	TLB_LO          1
+#define	TLB_HI          0
+
+#define	TLB_DATA        TLB_LO
+#define	TLB_TAG         TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
+#define   PAGESZ_1K		0
+#define   PAGESZ_4K             1
+#define   PAGESZ_16K            2
+#define   PAGESZ_64K            3
+#define   PAGESZ_256K           4
+#define   PAGESZ_1M             5
+#define   PAGESZ_4M             6
+#define   PAGESZ_16M            7
+#define TLB_VALID       0x00000040      /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
+#define TLB_PERM_MASK   0x00000300
+#define TLB_EX          0x00000200      /* Instruction execution allowed */
+#define TLB_WR          0x00000100      /* Writes permitted */
+#define TLB_ZSEL_MASK   0x000000F0
+#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK   0x0000000F
+#define TLB_W           0x00000008      /* Caching is write-through */
+#define TLB_I           0x00000004      /* Caching is inhibited */
+#define TLB_M           0x00000002      /* Memory is coherent */
+#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
new file mode 100644
index 000000000000..a825524c981a
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_POWERPC_MMU_44X_H_
+#define _ASM_POWERPC_MMU_44X_H_
+/*
+ * PPC440 support
+ */
+
+#define PPC44x_MMUCR_TID	0x000000ff
+#define PPC44x_MMUCR_STS	0x00010000
+
+#define	PPC44x_TLB_PAGEID	0
+#define	PPC44x_TLB_XLAT		1
+#define	PPC44x_TLB_ATTRIB	2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
+#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
+#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
+#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
+#define PPC44x_TLB_4K		0x00000010
+#define PPC44x_TLB_16K		0x00000020
+#define PPC44x_TLB_64K		0x00000030
+#define PPC44x_TLB_256K		0x00000040
+#define PPC44x_TLB_1M		0x00000050
+#define PPC44x_TLB_16M		0x00000070
+#define	PPC44x_TLB_256M		0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
+#define	PPC44x_TLB_ERPN_MASK	0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK	0x0000ff80
+#define PPC44x_TLB_U0		0x00008000      /* User 0 */
+#define PPC44x_TLB_U1		0x00004000      /* User 1 */
+#define PPC44x_TLB_U2		0x00002000      /* User 2 */
+#define PPC44x_TLB_U3		0x00001000      /* User 3 */
+#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
+#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
+#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
+#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK	0x0000003f
+#define PPC44x_TLB_UX		0x00000020      /* User execution */
+#define PPC44x_TLB_UW		0x00000010      /* User write */
+#define PPC44x_TLB_UR		0x00000008      /* User read */
+#define PPC44x_TLB_SX		0x00000004      /* Super execution */
+#define PPC44x_TLB_SW		0x00000002      /* Super write */
+#define PPC44x_TLB_SR		0x00000001      /* Super read */
+
+/* Number of TLB entries */
+#define PPC44x_TLB_SIZE		64
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int tlb_44x_hwater;
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_44x
+#define PPC44x_EARLY_TLBS	1
+#else
+#define PPC44x_EARLY_TLBS	2
+#define PPC44x_EARLY_DEBUG_VIRTADDR	(ASM_CONST(0xf0000000) \
+	| (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
+#endif
+
+/* Size of the TLBs used for pinning in lowmem */
+#define PPC_PIN_SIZE	(1 << 28)	/* 256M */
+
+#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
new file mode 100644
index 000000000000..9db877eb88db
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_POWERPC_MMU_8XX_H_
+#define _ASM_POWERPC_MMU_8XX_H_
+/*
+ * PPC8xx support
+ */
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read.  A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define SPRN_MI_CTR	784	/* Instruction TLB control register */
+#define MI_GPM		0x80000000	/* Set domain manager mode */
+#define MI_PPM		0x40000000	/* Set subpage protection */
+#define MI_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MI_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MI_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MI_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MI_RESETVAL	0x00000000	/* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MI_AP	786
+#define MI_Ks		0x80000000	/* Should not be set */
+#define MI_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MI_EPN	787
+#define MI_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MI_EVALID	0x00000200	/* Entry is valid */
+#define MI_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define SPRN_MI_TWC	789
+#define MI_APG		0x000001e0	/* Access protection group (0) */
+#define MI_GUARDED	0x00000010	/* Guarded storage */
+#define MI_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MI_PS8MEG	0x0000000c	/* 8M page size */
+#define MI_PS512K	0x00000004	/* 512K page size */
+#define MI_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MI_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define SPRN_MI_RPN	790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization.  This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT	0x000001fd
+
+#define SPRN_MD_CTR	792	/* Data TLB control register */
+#define MD_GPM		0x80000000	/* Set domain manager mode */
+#define MD_PPM		0x40000000	/* Set subpage protection */
+#define MD_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MD_WTDEF	0x10000000	/* Set writethrough when MMU dis */
+#define MD_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MD_TWAM		0x04000000	/* Use 4K page hardware assist */
+#define MD_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MD_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MD_RESETVAL	0x04000000	/* Value of register at reset */
+
+#define SPRN_M_CASID	793	/* Address space ID (context) to match */
+#define MC_ASIDMASK	0x0000000f	/* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MD_AP	794
+#define MD_Ks		0x80000000	/* Should not be set */
+#define MD_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MD_EPN	795
+#define MD_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MD_EVALID	0x00000200	/* Entry is valid */
+#define MD_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define SPRN_M_TWB	796
+#define	M_L1TB		0xfffff000	/* Level 1 table base address */
+#define M_L1INDX	0x00000ffc	/* Level 1 index, when read */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written.  It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define SPRN_MD_TWC	797
+#define MD_L2TB		0xfffff000	/* Level 2 table base address */
+#define MD_L2INDX	0xfffffe00	/* Level 2 index (*pte), when read */
+#define MD_APG		0x000001e0	/* Access protection group (0) */
+#define MD_GUARDED	0x00000010	/* Guarded storage */
+#define MD_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MD_PS8MEG	0x0000000c	/* 8M page size */
+#define MD_PS512K	0x00000004	/* 512K page size */
+#define MD_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MD_WT		0x00000002	/* Use writethrough page attribute */
+#define MD_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define SPRN_MD_RPN	798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define SPRN_M_TW	799
+
+#ifndef __ASSEMBLY__
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
new file mode 100644
index 000000000000..925d93cf64d8
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
+#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
+/*
+ * Freescale Book-E MMU support
+ */
+
+/* Book-E defined page sizes */
+#define BOOKE_PAGESZ_1K		0
+#define BOOKE_PAGESZ_4K		1
+#define BOOKE_PAGESZ_16K	2
+#define BOOKE_PAGESZ_64K	3
+#define BOOKE_PAGESZ_256K	4
+#define BOOKE_PAGESZ_1M		5
+#define BOOKE_PAGESZ_4M		6
+#define BOOKE_PAGESZ_16M	7
+#define BOOKE_PAGESZ_64M	8
+#define BOOKE_PAGESZ_256M	9
+#define BOOKE_PAGESZ_1GB	10
+#define BOOKE_PAGESZ_4GB	11
+#define BOOKE_PAGESZ_16GB	12
+#define BOOKE_PAGESZ_64GB	13
+#define BOOKE_PAGESZ_256GB	14
+#define BOOKE_PAGESZ_1TB	15
+
+#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)	((x) & 0x00000FFF)
+
+#define MAS1_VALID 	0x80000000
+#define MAS1_IPROT	0x40000000
+#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
+#define MAS1_TS		0x00001000
+#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+
+#define MAS2_EPN	0xFFFFF000
+#define MAS2_X0		0x00000040
+#define MAS2_X1		0x00000020
+#define MAS2_W		0x00000010
+#define MAS2_I		0x00000008
+#define MAS2_M		0x00000004
+#define MAS2_G		0x00000002
+#define MAS2_E		0x00000001
+
+#define MAS3_RPN	0xFFFFF000
+#define MAS3_U0		0x00000200
+#define MAS3_U1		0x00000100
+#define MAS3_U2		0x00000080
+#define MAS3_U3		0x00000040
+#define MAS3_UX		0x00000020
+#define MAS3_SX		0x00000010
+#define MAS3_UW		0x00000008
+#define MAS3_SW		0x00000004
+#define MAS3_UR		0x00000002
+#define MAS3_SR		0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL	0x000F0000
+#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
+#define MAS4_X0D	0x00000040
+#define MAS4_X1D	0x00000020
+#define MAS4_WD		0x00000010
+#define MAS4_ID		0x00000008
+#define MAS4_MD		0x00000004
+#define MAS4_GD		0x00000002
+#define MAS4_ED		0x00000001
+
+#define MAS6_SPID0	0x3FFF0000
+#define MAS6_SPID1	0x00007FFE
+#define MAS6_SAS	0x00000001
+#define MAS6_SPID	MAS6_SPID0
+
+#define MAS7_RPN	0xFFFFFFFF
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
new file mode 100644
index 000000000000..16b1a1e77e64
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -0,0 +1,83 @@
+#ifndef _ASM_POWERPC_MMU_HASH32_H_
+#define _ASM_POWERPC_MMU_HASH32_H_
+/*
+ * 32-bit hash table MMU support
+ */
+
+/*
+ * BATs
+ */
+
+/* Block size masks */
+#define BL_128K	0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M   0x007
+#define BL_2M   0x00F
+#define BL_4M   0x01F
+#define BL_8M   0x03F
+#define BL_16M  0x07F
+#define BL_32M  0x0FF
+#define BL_64M  0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX	0x00		/* No access */
+#define BPP_RX	0x01		/* Read only */
+#define BPP_RW	0x02		/* Read/write */
+
+#ifndef __ASSEMBLY__
+/* Contort a phys_addr_t into the right format/bits for a BAT */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
+				((x & 0x0000000e00000000ULL) >> 24) | \
+				((x & 0x0000000100000000ULL) >> 30)))
+#else
+#define BAT_PHYS_ADDR(x) (x)
+#endif
+
+struct ppc_bat {
+	u32 batu;
+	u32 batl;
+};
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hash table
+ */
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+/* Hardware Page Table Entry */
+struct hash_pte {
+	unsigned long v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long h:1;	/* Hash algorithm indicator */
+	unsigned long api:6;	/* Abbreviated page index */
+	unsigned long rpn:20;	/* Real (physical) page number */
+	unsigned long    :3;	/* Unused */
+	unsigned long r:1;	/* Referenced */
+	unsigned long c:1;	/* Changed */
+	unsigned long w:1;	/* Write-thru cache mode */
+	unsigned long i:1;	/* Cache inhibited */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded */
+	unsigned long  :1;	/* Unused */
+	unsigned long pp:2;	/* Page protection */
+};
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
new file mode 100644
index 000000000000..19c7a9403490
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -0,0 +1,478 @@
+#ifndef _ASM_POWERPC_MMU_HASH64_H_
+#define _ASM_POWERPC_MMU_HASH64_H_
+/*
+ * PowerPC64 memory management structures
+ *
+ * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
+ *   PPC64 rework.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/page.h>
+
+/*
+ * Segment table
+ */
+
+#define STE_ESID_V	0x80
+#define STE_ESID_KS	0x20
+#define STE_ESID_KP	0x10
+#define STE_ESID_N	0x08
+
+#define STE_VSID_SHIFT	12
+
+/* Location of cpu0's segment table */
+#define STAB0_PAGE	0x6
+#define STAB0_OFFSET	(STAB0_PAGE << 12)
+#define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
+
+#ifndef __ASSEMBLY__
+extern char initial_stab[];
+#endif /* ! __ASSEMBLY */
+
+/*
+ * SLB
+ */
+
+#define SLB_NUM_BOLTED		3
+#define SLB_CACHE_ENTRIES	8
+
+/* Bits in the SLB ESID word */
+#define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
+
+/* Bits in the SLB VSID word */
+#define SLB_VSID_SHIFT		12
+#define SLB_VSID_SHIFT_1T	24
+#define SLB_VSID_SSIZE_SHIFT	62
+#define SLB_VSID_B		ASM_CONST(0xc000000000000000)
+#define SLB_VSID_B_256M		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_B_1T		ASM_CONST(0x4000000000000000)
+#define SLB_VSID_KS		ASM_CONST(0x0000000000000800)
+#define SLB_VSID_KP		ASM_CONST(0x0000000000000400)
+#define SLB_VSID_N		ASM_CONST(0x0000000000000200) /* no-execute */
+#define SLB_VSID_L		ASM_CONST(0x0000000000000100)
+#define SLB_VSID_C		ASM_CONST(0x0000000000000080) /* class */
+#define SLB_VSID_LP		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LP_00		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_LP_01		ASM_CONST(0x0000000000000010)
+#define SLB_VSID_LP_10		ASM_CONST(0x0000000000000020)
+#define SLB_VSID_LP_11		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LLP		(SLB_VSID_L|SLB_VSID_LP)
+
+#define SLB_VSID_KERNEL		(SLB_VSID_KP)
+#define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
+
+#define SLBIE_C			(0x08000000)
+#define SLBIE_SSIZE_SHIFT	25
+
+/*
+ * Hash table
+ */
+
+#define HPTES_PER_GROUP 8
+
+#define HPTE_V_SSIZE_SHIFT	62
+#define HPTE_V_AVPN_SHIFT	7
+#define HPTE_V_AVPN		ASM_CONST(0x3fffffffffffff80)
+#define HPTE_V_AVPN_VAL(x)	(((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
+#define HPTE_V_COMPARE(x,y)	(!(((x) ^ (y)) & 0xffffffffffffff80UL))
+#define HPTE_V_BOLTED		ASM_CONST(0x0000000000000010)
+#define HPTE_V_LOCK		ASM_CONST(0x0000000000000008)
+#define HPTE_V_LARGE		ASM_CONST(0x0000000000000004)
+#define HPTE_V_SECONDARY	ASM_CONST(0x0000000000000002)
+#define HPTE_V_VALID		ASM_CONST(0x0000000000000001)
+
+#define HPTE_R_PP0		ASM_CONST(0x8000000000000000)
+#define HPTE_R_TS		ASM_CONST(0x4000000000000000)
+#define HPTE_R_RPN_SHIFT	12
+#define HPTE_R_RPN		ASM_CONST(0x3ffffffffffff000)
+#define HPTE_R_FLAGS		ASM_CONST(0x00000000000003ff)
+#define HPTE_R_PP		ASM_CONST(0x0000000000000003)
+#define HPTE_R_N		ASM_CONST(0x0000000000000004)
+#define HPTE_R_C		ASM_CONST(0x0000000000000080)
+#define HPTE_R_R		ASM_CONST(0x0000000000000100)
+
+#define HPTE_V_1TB_SEG		ASM_CONST(0x4000000000000000)
+#define HPTE_V_VRMA_MASK	ASM_CONST(0x4001ffffff000000)
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+/* pp0 will always be 0 for linux     */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+struct hash_pte {
+	unsigned long v;
+	unsigned long r;
+};
+
+extern struct hash_pte *htab_address;
+extern unsigned long htab_size_bytes;
+extern unsigned long htab_hash_mask;
+
+/*
+ * Page size definition
+ *
+ *    shift : is the "PAGE_SHIFT" value for that page size
+ *    sllp  : is a bit mask with the value of SLB L || LP to be or'ed
+ *            directly to a slbmte "vsid" value
+ *    penc  : is the HPTE encoding mask for the "LP" field:
+ *
+ */
+struct mmu_psize_def
+{
+	unsigned int	shift;	/* number of bits */
+	unsigned int	penc;	/* HPTE encoding */
+	unsigned int	tlbiel;	/* tlbiel supported for that page size */
+	unsigned long	avpnm;	/* bits to mask out in AVPN in the HPTE */
+	unsigned long	sllp;	/* SLB L||LP (exact mask to use in slbmte) */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ */
+
+#define MMU_PAGE_4K		0	/* 4K */
+#define MMU_PAGE_64K		1	/* 64K */
+#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
+#define MMU_PAGE_1M		3	/* 1M */
+#define MMU_PAGE_16M		4	/* 16M */
+#define MMU_PAGE_16G		5	/* 16G */
+#define MMU_PAGE_COUNT		6
+
+/*
+ * Segment sizes.
+ * These are the values used by hardware in the B field of
+ * SLB entries and the first dword of MMU hashtable entries.
+ * The B field is 2 bits; the values 2 and 3 are unused and reserved.
+ */
+#define MMU_SEGSIZE_256M	0
+#define MMU_SEGSIZE_1T		1
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The current system page and segment sizes
+ */
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+extern int mmu_linear_psize;
+extern int mmu_virtual_psize;
+extern int mmu_vmalloc_psize;
+extern int mmu_vmemmap_psize;
+extern int mmu_io_psize;
+extern int mmu_kernel_ssize;
+extern int mmu_highuser_ssize;
+extern u16 mmu_slb_size;
+extern unsigned long tce_alloc_start, tce_alloc_end;
+
+/*
+ * If the processor supports 64k normal pages but not 64k cache
+ * inhibited pages, we have to be prepared to switch processes
+ * to use 4k pages when they create cache-inhibited mappings.
+ * If this is the case, mmu_ci_restrictions will be set to 1.
+ */
+extern int mmu_ci_restrictions;
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * The page size indexes of the huge pages for use by hugetlbfs
+ */
+extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+/*
+ * This function sets the AVPN and L fields of the HPTE  appropriately
+ * for the page size
+ */
+static inline unsigned long hpte_encode_v(unsigned long va, int psize,
+					  int ssize)
+{
+	unsigned long v;
+	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
+	v <<= HPTE_V_AVPN_SHIFT;
+	if (psize != MMU_PAGE_4K)
+		v |= HPTE_V_LARGE;
+	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
+	return v;
+}
+
+/*
+ * This function sets the ARPN, and LP fields of the HPTE appropriately
+ * for the page size. We assume the pa is already "clean" that is properly
+ * aligned for the requested page size
+ */
+static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
+{
+	unsigned long r;
+
+	/* A 4K page needs no special encoding */
+	if (psize == MMU_PAGE_4K)
+		return pa & HPTE_R_RPN;
+	else {
+		unsigned int penc = mmu_psize_defs[psize].penc;
+		unsigned int shift = mmu_psize_defs[psize].shift;
+		return (pa & ~((1ul << shift) - 1)) | (penc << 12);
+	}
+	return r;
+}
+
+/*
+ * Build a VA given VSID, EA and segment size
+ */
+static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
+				   int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return (vsid << 28) | (ea & 0xfffffffUL);
+	return (vsid << 40) | (ea & 0xffffffffffUL);
+}
+
+/*
+ * This hashes a virtual address
+ */
+
+static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
+				     int ssize)
+{
+	unsigned long hash, vsid;
+
+	if (ssize == MMU_SEGSIZE_256M) {
+		hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
+	} else {
+		vsid = va >> 40;
+		hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
+	}
+	return hash & 0x7fffffffffUL;
+}
+
+extern int __hash_page_4K(unsigned long ea, unsigned long access,
+			  unsigned long vsid, pte_t *ptep, unsigned long trap,
+			  unsigned int local, int ssize, int subpage_prot);
+extern int __hash_page_64K(unsigned long ea, unsigned long access,
+			   unsigned long vsid, pte_t *ptep, unsigned long trap,
+			   unsigned int local, int ssize);
+struct mm_struct;
+extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
+extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
+			  unsigned long ea, unsigned long vsid, int local,
+			  unsigned long trap);
+
+extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
+			     unsigned long pstart, unsigned long mode,
+			     int psize, int ssize);
+extern void set_huge_psize(int psize);
+extern void add_gpage(unsigned long addr, unsigned long page_size,
+			  unsigned long number_of_pages);
+extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
+
+extern void htab_initialize(void);
+extern void htab_initialize_secondary(void);
+extern void hpte_init_native(void);
+extern void hpte_init_lpar(void);
+extern void hpte_init_iSeries(void);
+extern void hpte_init_beat(void);
+extern void hpte_init_beat_v3(void);
+
+extern void stabs_alloc(void);
+extern void slb_initialize(void);
+extern void slb_flush_and_rebolt(void);
+extern void stab_initialize(unsigned long stab);
+
+extern void slb_vmalloc_update(void);
+#endif /* __ASSEMBLY__ */
+
+/*
+ * VSID allocation
+ *
+ * We first generate a 36-bit "proto-VSID".  For kernel addresses this
+ * is equal to the ESID, for user addresses it is:
+ *	(context << 15) | (esid & 0x7fff)
+ *
+ * The two forms are distinguishable because the top bit is 0 for user
+ * addresses, whereas the top two bits are 1 for kernel addresses.
+ * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
+ * now.
+ *
+ * The proto-VSIDs are then scrambled into real VSIDs with the
+ * multiplicative hash:
+ *
+ *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
+ *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
+ *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
+ *
+ * This scramble is only well defined for proto-VSIDs below
+ * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
+ * reserved.  VSID_MULTIPLIER is prime, so in particular it is
+ * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
+ * Because the modulus is 2^n-1 we can compute it efficiently without
+ * a divide or extra multiply (see below).
+ *
+ * This scheme has several advantages over older methods:
+ *
+ * 	- We have VSIDs allocated for every kernel address
+ * (i.e. everything above 0xC000000000000000), except the very top
+ * segment, which simplifies several things.
+ *
+ * 	- We allow for 15 significant bits of ESID and 20 bits of
+ * context for user addresses.  i.e. 8T (43 bits) of address space for
+ * up to 1M contexts (although the page table structure and context
+ * allocation will need changes to take advantage of this).
+ *
+ * 	- The scramble function gives robust scattering in the hash
+ * table (at least based on some initial results).  The previous
+ * method was more susceptible to pathological cases giving excessive
+ * hash collisions.
+ */
+/*
+ * WARNING - If you change these you must make sure the asm
+ * implementations in slb_allocate (slb_low.S), do_stab_bolted
+ * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
+ *
+ * You'll also need to change the precomputed VSID values in head.S
+ * which are used by the iSeries firmware.
+ */
+
+#define VSID_MULTIPLIER_256M	ASM_CONST(200730139)	/* 28-bit prime */
+#define VSID_BITS_256M		36
+#define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
+
+#define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
+#define VSID_BITS_1T		24
+#define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
+
+#define CONTEXT_BITS		19
+#define USER_ESID_BITS		16
+#define USER_ESID_BITS_1T	4
+
+#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
+
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function.  Used in slb_allocate() and do_stab_bolted.  The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ *	rt = register continaing the proto-VSID and into which the
+ *		VSID will be stored
+ *	rx = scratch register (clobbered)
+ *
+ * 	- rt and rx must be different registers
+ * 	- The answer will end up in the low VSID_BITS bits of rt.  The higher
+ * 	  bits may contain other garbage, so you may need to mask the
+ * 	  result.
+ */
+#define ASM_VSID_SCRAMBLE(rt, rx, size)					\
+	lis	rx,VSID_MULTIPLIER_##size@h;				\
+	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
+	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
+									\
+	srdi	rx,rt,VSID_BITS_##size;					\
+	clrldi	rt,rt,(64-VSID_BITS_##size);				\
+	add	rt,rt,rx;		/* add high and low bits */	\
+	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
+	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
+	 * the bit clear, r3 already has the answer we want, if it	\
+	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
+	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
+	add	rt,rt,rx
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_context_id_t;
+
+typedef struct {
+	mm_context_id_t id;
+	u16 user_psize;		/* page size index */
+
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 low_slices_psize;	/* SLB page size encodings */
+	u64 high_slices_psize;  /* 4 bits per slice for now */
+#else
+	u16 sllp;		/* SLB page size encoding */
+#endif
+	unsigned long vdso_base;
+} mm_context_t;
+
+
+#if 0
+/*
+ * The code below is equivalent to this function for arguments
+ * < 2^VSID_BITS, which is all this should ever be called
+ * with.  However gcc is not clever enough to compute the
+ * modulus (2^n-1) without a second multiply.
+ */
+#define vsid_scrample(protovsid, size) \
+	((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
+
+#else /* 1 */
+#define vsid_scramble(protovsid, size) \
+	({								 \
+		unsigned long x;					 \
+		x = (protovsid) * VSID_MULTIPLIER_##size;		 \
+		x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
+		(x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
+	})
+#endif /* 1 */
+
+/* This is only valid for addresses >= KERNELBASE */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble(ea >> SID_SHIFT, 256M);
+	return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
+}
+
+/* Returns the segment size indicator for a user address */
+static inline int user_segment_size(unsigned long addr)
+{
+	/* Use 1T segments if possible for addresses >= 1T */
+	if (addr >= (1UL << SID_SHIFT_1T))
+		return mmu_highuser_ssize;
+	return MMU_SEGSIZE_256M;
+}
+
+/* This is only valid for user addresses (which are below 2^44) */
+static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
+				     int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble((context << USER_ESID_BITS)
+				     | (ea >> SID_SHIFT), 256M);
+	return vsid_scramble((context << USER_ESID_BITS_1T)
+			     | (ea >> SID_SHIFT_1T), 1T);
+}
+
+/*
+ * This is only used on legacy iSeries in lparmap.c,
+ * hence the 256MB segment assumption.
+ */
+#define VSID_SCRAMBLE(pvsid)	(((pvsid) * VSID_MULTIPLIER_256M) %	\
+				 VSID_MODULUS_256M)
+#define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
new file mode 100644
index 000000000000..4c0e1b4f975c
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_MMU_H_
+#define _ASM_POWERPC_MMU_H_
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+/* 64-bit classic hash table MMU */
+#  include <asm/mmu-hash64.h>
+#elif defined(CONFIG_PPC_STD_MMU)
+/* 32-bit classic hash table MMU */
+#  include <asm/mmu-hash32.h>
+#elif defined(CONFIG_40x)
+/* 40x-style software loaded TLB */
+#  include <asm/mmu-40x.h>
+#elif defined(CONFIG_44x)
+/* 44x-style software loaded TLB */
+#  include <asm/mmu-44x.h>
+#elif defined(CONFIG_FSL_BOOKE)
+/* Freescale Book-E software loaded TLB */
+#  include <asm/mmu-fsl-booke.h>
+#elif defined (CONFIG_PPC_8xx)
+/* Motorola/Freescale 8xx software loaded TLB */
+#  include <asm/mmu-8xx.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..9102b8bf0ead
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -0,0 +1,280 @@
+#ifndef __ASM_POWERPC_MMU_CONTEXT_H
+#define __ASM_POWERPC_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/mmu.h>	
+#include <asm/cputable.h>
+#include <asm-generic/mm_hooks.h>
+
+#ifndef CONFIG_PPC64
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   The MPC8xx has only 16 contexts.  We rotate through them on each
+   task switch.  A better way would be to keep track of tasks that
+   own contexts, and implement an LRU usage.  That way very active
+   tasks don't always have to pay the TLB reload overhead.  The
+   kernel pages are mapped shared, so the kernel can run on behalf
+   of any task that makes a kernel entry.  Shared does not mean they
+   are not protected, just that the ASID comparison is not performed.
+        -- Dan
+
+   The IBM4xx has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+   	-- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT      	16
+#define LAST_CONTEXT    	15
+#define FIRST_CONTEXT    	0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#elif defined(CONFIG_E200) || defined(CONFIG_E500)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(unsigned long contextid, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern unsigned long next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS	1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long ctx;
+
+	if (mm->context.id != NO_CONTEXT)
+		return;
+#ifdef FEW_CONTEXTS
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+#endif
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context.id = ctx;
+#ifdef FEW_CONTEXTS
+	context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = NO_CONTEXT;
+	mm->context.vdso_base = 0;
+	return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		clear_bit(mm->context.id, context_map);
+		mm->context.id = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+		atomic_inc(&nr_free_contexts);
+#endif
+	}
+	preempt_enable();
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+	asm volatile ("dssall;\n"
+#ifndef CONFIG_POWER4
+	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+	 : : );
+#endif /* CONFIG_ALTIVEC */
+
+	tsk->thread.pgdir = next->pgd;
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+	/* Setup new userspace context */
+	get_mmu_context(next);
+	set_context(next->context.id, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+
+#else
+
+#include <linux/kernel.h>	
+#include <linux/mm.h>	
+#include <linux/sched.h>
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				  struct task_struct *tsk)
+{
+}
+
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
+#define NO_CONTEXT	0
+#define MAX_CONTEXT	((1UL << 19) - 1)
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
+extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+
+/*
+ * switch_mm is the entry point called from the architecture independent
+ * code in kernel/sched.c
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
+		cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile ("dssall");
+#endif /* CONFIG_ALTIVEC */
+
+	if (cpu_has_feature(CPU_FTR_SLB))
+		switch_slb(tsk, next);
+	else
+		switch_stab(tsk, next);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm(prev, next, current);
+	local_irq_restore(flags);
+}
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
new file mode 100644
index 000000000000..19f299b7e256
--- /dev/null
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -0,0 +1,47 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ *
+ * PowerPC64 port:
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+#ifdef __KERNEL__
+
+
+/*
+ * generic non-linear memory support:
+ *
+ * 1) we will not split memory into more chunks than will fit into the
+ *    flags field of the struct page
+ */
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(node_data[nid])
+
+/*
+ * Following are specific to this numa platform.
+ */
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern unsigned long max_pfn;
+#endif
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
new file mode 100644
index 000000000000..e5f14b13ccf0
--- /dev/null
+++ b/arch/powerpc/include/asm/module.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_POWERPC_MODULE_H
+#define _ASM_POWERPC_MODULE_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+
+#ifndef __powerpc64__
+/*
+ * Thanks to Paul M for explaining this.
+ *
+ * PPC can only do rel jumps += 32MB, and often the kernel and other
+ * modules are furthur away than this.  So, we jump to a table of
+ * trampolines attached to the module (the Procedure Linkage Table)
+ * whenever that happens.
+ */
+
+struct ppc_plt_entry {
+	/* 16 byte jump instruction sequence (4 instructions) */
+	unsigned int jump[4];
+};
+#endif	/* __powerpc64__ */
+
+
+struct mod_arch_specific {
+#ifdef __powerpc64__
+	unsigned int stubs_section;	/* Index of stubs section in module */
+	unsigned int toc_section;	/* What section is the TOC? */
+#else
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section;
+	unsigned int init_plt_section;
+#endif
+
+	/* List of BUG addresses, source line numbers and filenames */
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+	unsigned int num_bugs;
+};
+
+/*
+ * Select ELF headers.
+ * Make empty section for module_frob_arch_sections to expand.
+ */
+
+#ifdef __powerpc64__
+#    define Elf_Shdr	Elf64_Shdr
+#    define Elf_Sym	Elf64_Sym
+#    define Elf_Ehdr	Elf64_Ehdr
+#    ifdef MODULE
+	asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
+#    endif
+#else
+#    define Elf_Shdr	Elf32_Shdr
+#    define Elf_Sym	Elf32_Sym
+#    define Elf_Ehdr	Elf32_Ehdr
+#    ifdef MODULE
+	asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+	asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#    endif	/* MODULE */
+#endif
+
+
+struct exception_table_entry;
+void sort_ex_table(struct exception_table_entry *start,
+		   struct exception_table_entry *finish);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
new file mode 100644
index 000000000000..c48a1658eeac
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc512x.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
+ *
+ * Description:
+ * MPC5121 Prototypes and definitions
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_MPC512x_H__
+#define __ASM_POWERPC_MPC512x_H__
+
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+
+#endif /* __ASM_POWERPC_MPC512x_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
new file mode 100644
index 000000000000..81ef10b6b672
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -0,0 +1,295 @@
+/*
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_POWERPC_MPC52xx_H__
+#define __ASM_POWERPC_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/prom.h>
+#endif /* __ASSEMBLY__ */
+
+#include <linux/suspend.h>
+
+/* Variants of the 5200(B) */
+#define MPC5200_SVR		0x80110010
+#define MPC5200_SVR_MASK	0xfffffff0
+#define MPC5200B_SVR		0x80110020
+#define MPC5200B_SVR_MASK	0xfffffff0
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set                             */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+	u32 mbar;		/* MMAP_CTRL + 0x00 */
+
+	u32 cs0_start;		/* MMAP_CTRL + 0x04 */
+	u32 cs0_stop;		/* MMAP_CTRL + 0x08 */
+	u32 cs1_start;		/* MMAP_CTRL + 0x0c */
+	u32 cs1_stop;		/* MMAP_CTRL + 0x10 */
+	u32 cs2_start;		/* MMAP_CTRL + 0x14 */
+	u32 cs2_stop;		/* MMAP_CTRL + 0x18 */
+	u32 cs3_start;		/* MMAP_CTRL + 0x1c */
+	u32 cs3_stop;		/* MMAP_CTRL + 0x20 */
+	u32 cs4_start;		/* MMAP_CTRL + 0x24 */
+	u32 cs4_stop;		/* MMAP_CTRL + 0x28 */
+	u32 cs5_start;		/* MMAP_CTRL + 0x2c */
+	u32 cs5_stop;		/* MMAP_CTRL + 0x30 */
+
+	u32 sdram0;		/* MMAP_CTRL + 0x34 */
+	u32 sdram1;		/* MMAP_CTRL + 0X38 */
+
+	u32 reserved[4];	/* MMAP_CTRL + 0x3c .. 0x48 */
+
+	u32 boot_start;		/* MMAP_CTRL + 0x4c */
+	u32 boot_stop;		/* MMAP_CTRL + 0x50 */
+
+	u32 ipbi_ws_ctrl;	/* MMAP_CTRL + 0x54 */
+
+	u32 cs6_start;		/* MMAP_CTRL + 0x58 */
+	u32 cs6_stop;		/* MMAP_CTRL + 0x5c */
+	u32 cs7_start;		/* MMAP_CTRL + 0x60 */
+	u32 cs7_stop;		/* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+	u32 mode;		/* SDRAM + 0x00 */
+	u32 ctrl;		/* SDRAM + 0x04 */
+	u32 config1;		/* SDRAM + 0x08 */
+	u32 config2;		/* SDRAM + 0x0c */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+	u32 taskBar;		/* SDMA + 0x00 */
+	u32 currentPointer;	/* SDMA + 0x04 */
+	u32 endPointer;		/* SDMA + 0x08 */
+	u32 variablePointer;	/* SDMA + 0x0c */
+
+	u8 IntVect1;		/* SDMA + 0x10 */
+	u8 IntVect2;		/* SDMA + 0x11 */
+	u16 PtdCntrl;		/* SDMA + 0x12 */
+
+	u32 IntPend;		/* SDMA + 0x14 */
+	u32 IntMask;		/* SDMA + 0x18 */
+
+	u16 tcr[16];		/* SDMA + 0x1c .. 0x3a */
+
+	u8 ipr[32];		/* SDMA + 0x3c .. 0x5b */
+
+	u32 cReqSelect;		/* SDMA + 0x5c */
+	u32 task_size0;		/* SDMA + 0x60 */
+	u32 task_size1;		/* SDMA + 0x64 */
+	u32 MDEDebug;		/* SDMA + 0x68 */
+	u32 ADSDebug;		/* SDMA + 0x6c */
+	u32 Value1;		/* SDMA + 0x70 */
+	u32 Value2;		/* SDMA + 0x74 */
+	u32 Control;		/* SDMA + 0x78 */
+	u32 Status;		/* SDMA + 0x7c */
+	u32 PTDDebug;		/* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+	u32 mode;		/* GPTx + 0x00 */
+	u32 count;		/* GPTx + 0x04 */
+	u32 pwm;		/* GPTx + 0x08 */
+	u32 status;		/* GPTx + 0X0c */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+	u32 port_config;	/* GPIO + 0x00 */
+	u32 simple_gpioe;	/* GPIO + 0x04 */
+	u32 simple_ode;		/* GPIO + 0x08 */
+	u32 simple_ddr;		/* GPIO + 0x0c */
+	u32 simple_dvo;		/* GPIO + 0x10 */
+	u32 simple_ival;	/* GPIO + 0x14 */
+	u8 outo_gpioe;		/* GPIO + 0x18 */
+	u8 reserved1[3];	/* GPIO + 0x19 */
+	u8 outo_dvo;		/* GPIO + 0x1c */
+	u8 reserved2[3];	/* GPIO + 0x1d */
+	u8 sint_gpioe;		/* GPIO + 0x20 */
+	u8 reserved3[3];	/* GPIO + 0x21 */
+	u8 sint_ode;		/* GPIO + 0x24 */
+	u8 reserved4[3];	/* GPIO + 0x25 */
+	u8 sint_ddr;		/* GPIO + 0x28 */
+	u8 reserved5[3];	/* GPIO + 0x29 */
+	u8 sint_dvo;		/* GPIO + 0x2c */
+	u8 reserved6[3];	/* GPIO + 0x2d */
+	u8 sint_inten;		/* GPIO + 0x30 */
+	u8 reserved7[3];	/* GPIO + 0x31 */
+	u16 sint_itype;		/* GPIO + 0x34 */
+	u16 reserved8;		/* GPIO + 0x36 */
+	u8 gpio_control;	/* GPIO + 0x38 */
+	u8 reserved9[3];	/* GPIO + 0x39 */
+	u8 sint_istat;		/* GPIO + 0x3c */
+	u8 sint_ival;		/* GPIO + 0x3d */
+	u8 bus_errs;		/* GPIO + 0x3e */
+	u8 reserved10;		/* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD	4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD	5
+#define MPC52xx_GPIO_PCI_DIS			(1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+	u8 wkup_gpioe;		/* GPIO_WKUP + 0x00 */
+	u8 reserved1[3];	/* GPIO_WKUP + 0x03 */
+	u8 wkup_ode;		/* GPIO_WKUP + 0x04 */
+	u8 reserved2[3];	/* GPIO_WKUP + 0x05 */
+	u8 wkup_ddr;		/* GPIO_WKUP + 0x08 */
+	u8 reserved3[3];	/* GPIO_WKUP + 0x09 */
+	u8 wkup_dvo;		/* GPIO_WKUP + 0x0C */
+	u8 reserved4[3];	/* GPIO_WKUP + 0x0D */
+	u8 wkup_inten;		/* GPIO_WKUP + 0x10 */
+	u8 reserved5[3];	/* GPIO_WKUP + 0x11 */
+	u8 wkup_iinten;		/* GPIO_WKUP + 0x14 */
+	u8 reserved6[3];	/* GPIO_WKUP + 0x15 */
+	u16 wkup_itype;		/* GPIO_WKUP + 0x18 */
+	u8 reserved7[2];	/* GPIO_WKUP + 0x1A */
+	u8 wkup_maste;		/* GPIO_WKUP + 0x1C */
+	u8 reserved8[3];	/* GPIO_WKUP + 0x1D */
+	u8 wkup_ival;		/* GPIO_WKUP + 0x20 */
+	u8 reserved9[3];	/* GPIO_WKUP + 0x21 */
+	u8 wkup_istat;		/* GPIO_WKUP + 0x24 */
+	u8 reserved10[3];	/* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+	u8 reserved[0x40];
+	u32 config;		/* XLB + 0x40 */
+	u32 version;		/* XLB + 0x44 */
+	u32 status;		/* XLB + 0x48 */
+	u32 int_enable;		/* XLB + 0x4c */
+	u32 addr_capture;	/* XLB + 0x50 */
+	u32 bus_sig_capture;	/* XLB + 0x54 */
+	u32 addr_timeout;	/* XLB + 0x58 */
+	u32 data_timeout;	/* XLB + 0x5c */
+	u32 bus_act_timeout;	/* XLB + 0x60 */
+	u32 master_pri_enable;	/* XLB + 0x64 */
+	u32 master_priority;	/* XLB + 0x68 */
+	u32 base_address;	/* XLB + 0x6c */
+	u32 snoop_window;	/* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_PLDIS		(1 << 31)
+#define MPC52xx_XLB_CFG_SNOOP		(1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+	u32 jtag_id;		/* CDM + 0x00  reg0 read only */
+	u32 rstcfg;		/* CDM + 0x04  reg1 read only */
+	u32 breadcrumb;		/* CDM + 0x08  reg2 */
+
+	u8 mem_clk_sel;		/* CDM + 0x0c  reg3 byte0 */
+	u8 xlb_clk_sel;		/* CDM + 0x0d  reg3 byte1 read only */
+	u8 ipb_clk_sel;		/* CDM + 0x0e  reg3 byte2 */
+	u8 pci_clk_sel;		/* CDM + 0x0f  reg3 byte3 */
+
+	u8 ext_48mhz_en;	/* CDM + 0x10  reg4 byte0 */
+	u8 fd_enable;		/* CDM + 0x11  reg4 byte1 */
+	u16 fd_counters;	/* CDM + 0x12  reg4 byte2,3 */
+
+	u32 clk_enables;	/* CDM + 0x14  reg5 */
+
+	u8 osc_disable;		/* CDM + 0x18  reg6 byte0 */
+	u8 reserved0[3];	/* CDM + 0x19  reg6 byte1,2,3 */
+
+	u8 ccs_sleep_enable;	/* CDM + 0x1c  reg7 byte0 */
+	u8 osc_sleep_enable;	/* CDM + 0x1d  reg7 byte1 */
+	u8 reserved1;		/* CDM + 0x1e  reg7 byte2 */
+	u8 ccs_qreq_test;	/* CDM + 0x1f  reg7 byte3 */
+
+	u8 soft_reset;		/* CDM + 0x20  u8 byte0 */
+	u8 no_ckstp;		/* CDM + 0x21  u8 byte0 */
+	u8 reserved2[2];	/* CDM + 0x22  u8 byte1,2,3 */
+
+	u8 pll_lock;		/* CDM + 0x24  reg9 byte0 */
+	u8 pll_looselock;	/* CDM + 0x25  reg9 byte1 */
+	u8 pll_sm_lockwin;	/* CDM + 0x26  reg9 byte2 */
+	u8 reserved3;		/* CDM + 0x27  reg9 byte3 */
+
+	u16 reserved4;		/* CDM + 0x28  reg10 byte0,1 */
+	u16 mclken_div_psc1;	/* CDM + 0x2a  reg10 byte2,3 */
+
+	u16 reserved5;		/* CDM + 0x2c  reg11 byte0,1 */
+	u16 mclken_div_psc2;	/* CDM + 0x2e  reg11 byte2,3 */
+
+	u16 reserved6;		/* CDM + 0x30  reg12 byte0,1 */
+	u16 mclken_div_psc3;	/* CDM + 0x32  reg12 byte2,3 */
+
+	u16 reserved7;		/* CDM + 0x34  reg13 byte0,1 */
+	u16 mclken_div_psc6;	/* CDM + 0x36  reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx sysdev                                             */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+/* mpc52xx_common.c */
+extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
+extern void mpc5200_setup_xlb_arbiter(void);
+extern void mpc52xx_declare_of_platform_devices(void);
+extern void mpc52xx_map_common_devices(void);
+extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
+extern void mpc52xx_restart(char *cmd);
+
+/* mpc52xx_pic.c */
+extern void mpc52xx_init_irq(void);
+extern unsigned int mpc52xx_get_irq(void);
+
+/* mpc52xx_pci.c */
+#ifdef CONFIG_PCI
+extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void __init mpc52xx_setup_pci(void);
+#else
+static inline void mpc52xx_setup_pci(void) { }
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PM
+struct mpc52xx_suspend {
+	void (*board_suspend_prepare)(void __iomem *mbar);
+	void (*board_resume_finish)(void __iomem *mbar);
+};
+
+extern struct mpc52xx_suspend mpc52xx_suspend;
+extern int __init mpc52xx_pm_init(void);
+extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+
+#ifdef CONFIG_PPC_LITE5200
+extern int __init lite5200_pm_init(void);
+
+/* lite5200 calls mpc5200 suspend functions, so here they are */
+extern int mpc52xx_pm_prepare(void);
+extern int mpc52xx_pm_enter(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
+extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
+#endif
+#endif /* CONFIG_PM */
+
+#endif /* __ASM_POWERPC_MPC52xx_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
new file mode 100644
index 000000000000..8917ed630565
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -0,0 +1,276 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ *
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by
+ * Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM	6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE	0x0080
+#define MPC52xx_PSC_SR_RXRDY	0x0100
+#define MPC52xx_PSC_SR_RXFULL	0x0200
+#define MPC52xx_PSC_SR_TXRDY	0x0400
+#define MPC52xx_PSC_SR_TXEMP	0x0800
+#define MPC52xx_PSC_SR_OE	0x1000
+#define MPC52xx_PSC_SR_PE	0x2000
+#define MPC52xx_PSC_SR_FE	0x4000
+#define MPC52xx_PSC_SR_RB	0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE		0x0001
+#define MPC52xx_PSC_RX_DISABLE		0x0002
+#define MPC52xx_PSC_TX_ENABLE		0x0004
+#define MPC52xx_PSC_TX_DISABLE		0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1	0x0010
+#define MPC52xx_PSC_RST_RX		0x0020
+#define MPC52xx_PSC_RST_TX		0x0030
+#define MPC52xx_PSC_RST_ERR_STAT	0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT	0x0050
+#define MPC52xx_PSC_START_BRK		0x0060
+#define MPC52xx_PSC_STOP_BRK		0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR	0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF	0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF	0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR	0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL	0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
+
+/* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_TXRDY		0x0100
+#define MPC52xx_PSC_IMR_RXRDY		0x0200
+#define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_TXEMP		0x0800
+#define MPC52xx_PSC_IMR_ORERR		0x1000
+#define MPC52xx_PSC_IMR_IPC		0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS			0x01
+#define MPC52xx_PSC_DCD			0x02
+#define MPC52xx_PSC_D_CTS		0x10
+#define MPC52xx_PSC_D_DCD		0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS			0x00
+#define MPC52xx_PSC_MODE_6_BITS			0x01
+#define MPC52xx_PSC_MODE_7_BITS			0x02
+#define MPC52xx_PSC_MODE_8_BITS			0x03
+#define MPC52xx_PSC_MODE_BITS_MASK		0x03
+#define MPC52xx_PSC_MODE_PAREVEN		0x00
+#define MPC52xx_PSC_MODE_PARODD			0x04
+#define MPC52xx_PSC_MODE_PARFORCE		0x08
+#define MPC52xx_PSC_MODE_PARNONE		0x10
+#define MPC52xx_PSC_MODE_ERR			0x20
+#define MPC52xx_PSC_MODE_FFULL			0x40
+#define MPC52xx_PSC_MODE_RXRTS			0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS	0x00
+#define MPC52xx_PSC_MODE_ONE_STOP		0x07
+#define MPC52xx_PSC_MODE_TWO_STOP		0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK	0x01ff
+
+#define MPC52xx_PSC_SICR_DTS1			(1 << 29)
+#define MPC52xx_PSC_SICR_SHDR			(1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK		(0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART		(0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8		(0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16		(0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97		(0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD		(0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR		(0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
+#define MPC52xx_PSC_SICR_I2S			(1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL		(1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE		(1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK		(1 << 18)
+#define MPC52xx_PSC_SICR_ESAI			(1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97			(1 << 16)
+#define MPC52xx_PSC_SICR_SPI			(1 << 15)
+#define MPC52xx_PSC_SICR_MSTR			(1 << 14)
+#define MPC52xx_PSC_SICR_CPOL			(1 << 13)
+#define MPC52xx_PSC_SICR_CPHA			(1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF			(1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF		(1 << 10)
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+	u8		mode;		/* PSC + 0x00 */
+	u8		reserved0[3];
+	union {				/* PSC + 0x04 */
+		u16	status;
+		u16	clock_select;
+	} sr_csr;
+#define mpc52xx_psc_status	sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+	u16		reserved1;
+	u8		command;	/* PSC + 0x08 */
+	u8		reserved2[3];
+	union {				/* PSC + 0x0c */
+		u8	buffer_8;
+		u16	buffer_16;
+		u32	buffer_32;
+	} buffer;
+#define mpc52xx_psc_buffer_8	buffer.buffer_8
+#define mpc52xx_psc_buffer_16	buffer.buffer_16
+#define mpc52xx_psc_buffer_32	buffer.buffer_32
+	union {				/* PSC + 0x10 */
+		u8	ipcr;
+		u8	acr;
+	} ipcr_acr;
+#define mpc52xx_psc_ipcr	ipcr_acr.ipcr
+#define mpc52xx_psc_acr		ipcr_acr.acr
+	u8		reserved3[3];
+	union {				/* PSC + 0x14 */
+		u16	isr;
+		u16	imr;
+	} isr_imr;
+#define mpc52xx_psc_isr		isr_imr.isr
+#define mpc52xx_psc_imr		isr_imr.imr
+	u16		reserved4;
+	u8		ctur;		/* PSC + 0x18 */
+	u8		reserved5[3];
+	u8		ctlr;		/* PSC + 0x1c */
+	u8		reserved6[3];
+	/* BitClkDiv field of CCR is byte swapped in
+	 * the hardware for mpc5200/b compatibility */
+	u32		ccr;		/* PSC + 0x20 */
+	u32		ac97_slots;	/* PSC + 0x24 */
+	u32		ac97_cmd;	/* PSC + 0x28 */
+	u32		ac97_data;	/* PSC + 0x2c */
+	u8		ivr;		/* PSC + 0x30 */
+	u8		reserved8[3];
+	u8		ip;		/* PSC + 0x34 */
+	u8		reserved9[3];
+	u8		op1;		/* PSC + 0x38 */
+	u8		reserved10[3];
+	u8		op0;		/* PSC + 0x3c */
+	u8		reserved11[3];
+	u32		sicr;		/* PSC + 0x40 */
+	u8		ircr1;		/* PSC + 0x44 */
+	u8		reserved13[3];
+	u8		ircr2;		/* PSC + 0x44 */
+	u8		reserved14[3];
+	u8		irsdr;		/* PSC + 0x4c */
+	u8		reserved15[3];
+	u8		irmdr;		/* PSC + 0x50 */
+	u8		reserved16[3];
+	u8		irfdr;		/* PSC + 0x54 */
+	u8		reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
+	u16		rfnum;		/* PSC + 0x58 */
+	u16		reserved18;
+	u16		tfnum;		/* PSC + 0x5c */
+	u16		reserved19;
+	u32		rfdata;		/* PSC + 0x60 */
+	u16		rfstat;		/* PSC + 0x64 */
+	u16		reserved20;
+	u8		rfcntl;		/* PSC + 0x68 */
+	u8		reserved21[5];
+	u16		rfalarm;	/* PSC + 0x6e */
+	u16		reserved22;
+	u16		rfrptr;		/* PSC + 0x72 */
+	u16		reserved23;
+	u16		rfwptr;		/* PSC + 0x76 */
+	u16		reserved24;
+	u16		rflrfptr;	/* PSC + 0x7a */
+	u16		reserved25;
+	u16		rflwfptr;	/* PSC + 0x7e */
+	u32		tfdata;		/* PSC + 0x80 */
+	u16		tfstat;		/* PSC + 0x84 */
+	u16		reserved26;
+	u8		tfcntl;		/* PSC + 0x88 */
+	u8		reserved27[5];
+	u16		tfalarm;	/* PSC + 0x8e */
+	u16		reserved28;
+	u16		tfrptr;		/* PSC + 0x92 */
+	u16		reserved29;
+	u16		tfwptr;		/* PSC + 0x96 */
+	u16		reserved30;
+	u16		tflrfptr;	/* PSC + 0x9a */
+	u16		reserved31;
+	u16		tflwfptr;	/* PSC + 0x9e */
+};
+
+#define MPC512x_PSC_FIFO_RESET_SLICE	0x80
+#define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
+#define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
+
+#define MPC512x_PSC_FIFO_EMPTY		0x1
+#define MPC512x_PSC_FIFO_FULL		0x2
+#define MPC512x_PSC_FIFO_ALARM		0x4
+#define MPC512x_PSC_FIFO_URERR		0x8
+#define MPC512x_PSC_FIFO_ORERR		0x01
+#define MPC512x_PSC_FIFO_MEMERROR	0x02
+
+struct mpc512x_psc_fifo {
+	u32		reserved1[10];
+	u32		txcmd;		/* PSC + 0x80 */
+	u32		txalarm;	/* PSC + 0x84 */
+	u32		txsr;		/* PSC + 0x88 */
+	u32		txisr;		/* PSC + 0x8c */
+	u32		tximr;		/* PSC + 0x90 */
+	u32		txcnt;		/* PSC + 0x94 */
+	u32		txptr;		/* PSC + 0x98 */
+	u32		txsz;		/* PSC + 0x9c */
+	u32		reserved2[7];
+	union {
+		u8	txdata_8;
+		u16	txdata_16;
+		u32	txdata_32;
+	} txdata; 			/* PSC + 0xbc */
+#define txdata_8 txdata.txdata_8
+#define txdata_16 txdata.txdata_16
+#define txdata_32 txdata.txdata_32
+	u32		rxcmd;		/* PSC + 0xc0 */
+	u32		rxalarm;	/* PSC + 0xc4 */
+	u32		rxsr;		/* PSC + 0xc8 */
+	u32		rxisr;		/* PSC + 0xcc */
+	u32		rximr;		/* PSC + 0xd0 */
+	u32		rxcnt;		/* PSC + 0xd4 */
+	u32		rxptr;		/* PSC + 0xd8 */
+	u32		rxsz;		/* PSC + 0xdc */
+	u32		reserved3[7];
+	union {
+		u8	rxdata_8;
+		u16	rxdata_16;
+		u32	rxdata_32;
+	} rxdata; 			/* PSC + 0xfc */
+#define rxdata_8 rxdata.rxdata_8
+#define rxdata_16 rxdata.rxdata_16
+#define rxdata_32 rxdata.rxdata_32
+};
+
+#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h
new file mode 100644
index 000000000000..effc2291beb2
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc6xx.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_POWERPC_MPC6xx_H
+#define __ASM_POWERPC_MPC6xx_H
+
+void mpc6xx_enter_standby(void);
+
+#endif
diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h
new file mode 100644
index 000000000000..03317e1e6185
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8260.h
@@ -0,0 +1,25 @@
+/*
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8260 configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC8260_H__
+#define __ASM_POWERPC_MPC8260_H__
+
+#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
+
+#ifdef CONFIG_8260
+
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
+#include <platforms/82xx/pq2ads.h>
+#endif
+
+#ifdef CONFIG_PCI_8260
+#include <platforms/82xx/m82xx_pci.h>
+#endif
+
+#endif /* CONFIG_8260 */
+#endif /* !__ASM_POWERPC_MPC8260_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
new file mode 100644
index 000000000000..15f650f987e7
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc86xx.h
@@ -0,0 +1,33 @@
+/*
+ * MPC86xx definitions
+ *
+ * Author: Jeff Brown
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC86xx_H__
+#define __ASM_POWERPC_MPC86xx_H__
+
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_86xx
+
+#define CPU0_BOOT_RELEASE 0x01000000
+#define CPU1_BOOT_RELEASE 0x02000000
+#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
+#define MCM_PORT_CONFIG_OFFSET 0x1010
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x00000)
+#define MPC86xx_MCM_SIZE        (0x02000)
+
+#endif /* CONFIG_PPC_86xx */
+#endif /* __ASM_POWERPC_MPC86xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
new file mode 100644
index 000000000000..98f3c4f17328
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8xx.h
@@ -0,0 +1,12 @@
+/* This is the single file included by all MPC8xx build options.
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8xx configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifndef __CONFIG_8xx_DEFS
+#define __CONFIG_8xx_DEFS
+
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+
+#endif /* __CONFIG_8xx_DEFS */
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
new file mode 100644
index 000000000000..fe566a348a86
--- /dev/null
+++ b/arch/powerpc/include/asm/mpic.h
@@ -0,0 +1,481 @@
+#ifndef _ASM_POWERPC_MPIC_H
+#define _ASM_POWERPC_MPIC_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <asm/dcr.h>
+
+/*
+ * Global registers
+ */
+
+#define MPIC_GREG_BASE			0x01000
+
+#define MPIC_GREG_FEATURE_0		0x00000
+#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000
+#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16
+#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00
+#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8
+#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff
+#define MPIC_GREG_FEATURE_1		0x00010
+#define MPIC_GREG_GLOBAL_CONF_0		0x00020
+#define		MPIC_GREG_GCONF_RESET			0x80000000
+#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
+#define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
+#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
+#define		MPIC_GREG_GCONF_MCK			0x08000000
+#define MPIC_GREG_GLOBAL_CONF_1		0x00030
+#define		MPIC_GREG_GLOBAL_CONF_1_SIE		0x08000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK	0x70000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)	\
+			(((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
+#define MPIC_GREG_VENDOR_0		0x00040
+#define MPIC_GREG_VENDOR_1		0x00050
+#define MPIC_GREG_VENDOR_2		0x00060
+#define MPIC_GREG_VENDOR_3		0x00070
+#define MPIC_GREG_VENDOR_ID		0x00080
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8
+#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
+#define MPIC_GREG_PROCESSOR_INIT	0x00090
+#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0
+#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
+#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
+#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
+#define MPIC_GREG_IPI_STRIDE		0x10
+#define MPIC_GREG_SPURIOUS		0x000e0
+#define MPIC_GREG_TIMER_FREQ		0x000f0
+
+/*
+ *
+ * Timer registers
+ */
+#define MPIC_TIMER_BASE			0x01100
+#define MPIC_TIMER_STRIDE		0x40
+
+#define MPIC_TIMER_CURRENT_CNT		0x00000
+#define MPIC_TIMER_BASE_CNT		0x00010
+#define MPIC_TIMER_VECTOR_PRI		0x00020
+#define MPIC_TIMER_DESTINATION		0x00030
+
+/*
+ * Per-Processor registers
+ */
+
+#define MPIC_CPU_THISBASE		0x00000
+#define MPIC_CPU_BASE			0x20000
+#define MPIC_CPU_STRIDE			0x01000
+
+#define MPIC_CPU_IPI_DISPATCH_0		0x00040
+#define MPIC_CPU_IPI_DISPATCH_1		0x00050
+#define MPIC_CPU_IPI_DISPATCH_2		0x00060
+#define MPIC_CPU_IPI_DISPATCH_3		0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010
+#define MPIC_CPU_CURRENT_TASK_PRI	0x00080
+#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
+#define MPIC_CPU_WHOAMI			0x00090
+#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f
+#define MPIC_CPU_INTACK			0x000a0
+#define MPIC_CPU_EOI			0x000b0
+#define MPIC_CPU_MCACK			0x000c0
+
+/*
+ * Per-source registers
+ */
+
+#define MPIC_IRQ_BASE			0x10000
+#define MPIC_IRQ_STRIDE			0x00020
+#define MPIC_IRQ_VECTOR_PRI		0x00000
+#define 	MPIC_VECPRI_MASK			0x80000000
+#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */
+#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000
+#define 	MPIC_VECPRI_PRIORITY_SHIFT		16
+#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff
+#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000
+#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000
+#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000
+#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000
+#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000
+#define 	MPIC_VECPRI_SENSE_MASK			0x00400000
+#define MPIC_IRQ_DESTINATION		0x00010
+
+#define MPIC_MAX_IRQ_SOURCES	2048
+#define MPIC_MAX_CPUS		32
+#define MPIC_MAX_ISU		32
+
+/*
+ * Tsi108 implementation of MPIC has many differences from the original one
+ */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE		0x00000
+#define TSI108_GREG_FEATURE_0		0x00000
+#define TSI108_GREG_GLOBAL_CONF_0	0x00004
+#define TSI108_GREG_VENDOR_ID		0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE		0x0c
+#define TSI108_GREG_SPURIOUS		0x00010
+#define TSI108_GREG_TIMER_FREQ		0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE		0x0030
+#define TSI108_TIMER_STRIDE		0x10
+#define TSI108_TIMER_CURRENT_CNT	0x00000
+#define TSI108_TIMER_BASE_CNT		0x00004
+#define TSI108_TIMER_VECTOR_PRI		0x00008
+#define TSI108_TIMER_DESTINATION	0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE			0x00300
+#define TSI108_CPU_STRIDE		0x00040
+#define TSI108_CPU_IPI_DISPATCH_0	0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI	0x00000
+#define TSI108_CPU_WHOAMI		0xffffffff
+#define TSI108_CPU_INTACK		0x00004
+#define TSI108_CPU_EOI			0x00008
+#define TSI108_CPU_MCACK		0x00004 /* Doesn't really exist here */
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_BASE			0x00100
+#define TSI108_IRQ_STRIDE		0x00008
+#define TSI108_IRQ_VECTOR_PRI		0x00000
+#define TSI108_VECPRI_VECTOR_MASK	0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000
+#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000
+#define TSI108_VECPRI_SENSE_LEVEL	0x02000000
+#define TSI108_VECPRI_SENSE_EDGE	0x00000000
+#define TSI108_VECPRI_POLARITY_MASK	0x01000000
+#define TSI108_VECPRI_SENSE_MASK	0x02000000
+#define TSI108_IRQ_DESTINATION		0x00004
+
+/* weird mpic register indices and mask bits in the HW info array */
+enum {
+	MPIC_IDX_GREG_BASE = 0,
+	MPIC_IDX_GREG_FEATURE_0,
+	MPIC_IDX_GREG_GLOBAL_CONF_0,
+	MPIC_IDX_GREG_VENDOR_ID,
+	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
+	MPIC_IDX_GREG_IPI_STRIDE,
+	MPIC_IDX_GREG_SPURIOUS,
+	MPIC_IDX_GREG_TIMER_FREQ,
+
+	MPIC_IDX_TIMER_BASE,
+	MPIC_IDX_TIMER_STRIDE,
+	MPIC_IDX_TIMER_CURRENT_CNT,
+	MPIC_IDX_TIMER_BASE_CNT,
+	MPIC_IDX_TIMER_VECTOR_PRI,
+	MPIC_IDX_TIMER_DESTINATION,
+
+	MPIC_IDX_CPU_BASE,
+	MPIC_IDX_CPU_STRIDE,
+	MPIC_IDX_CPU_IPI_DISPATCH_0,
+	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
+	MPIC_IDX_CPU_CURRENT_TASK_PRI,
+	MPIC_IDX_CPU_WHOAMI,
+	MPIC_IDX_CPU_INTACK,
+	MPIC_IDX_CPU_EOI,
+	MPIC_IDX_CPU_MCACK,
+
+	MPIC_IDX_IRQ_BASE,
+	MPIC_IDX_IRQ_STRIDE,
+	MPIC_IDX_IRQ_VECTOR_PRI,
+
+	MPIC_IDX_VECPRI_VECTOR_MASK,
+	MPIC_IDX_VECPRI_POLARITY_POSITIVE,
+	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
+	MPIC_IDX_VECPRI_SENSE_LEVEL,
+	MPIC_IDX_VECPRI_SENSE_EDGE,
+	MPIC_IDX_VECPRI_POLARITY_MASK,
+	MPIC_IDX_VECPRI_SENSE_MASK,
+	MPIC_IDX_IRQ_DESTINATION,
+	MPIC_IDX_END
+};
+
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+/* Fixup table entry */
+struct mpic_irq_fixup
+{
+	u8 __iomem	*base;
+	u8 __iomem	*applebase;
+	u32		data;
+	unsigned int	index;
+};
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
+
+
+enum mpic_reg_type {
+	mpic_access_mmio_le,
+	mpic_access_mmio_be,
+#ifdef CONFIG_PPC_DCR
+	mpic_access_dcr
+#endif
+};
+
+struct mpic_reg_bank {
+	u32 __iomem	*base;
+#ifdef CONFIG_PPC_DCR
+	dcr_host_t	dhost;
+#endif /* CONFIG_PPC_DCR */
+};
+
+struct mpic_irq_save {
+	u32		vecprio,
+			dest;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	u32		fixup_data;
+#endif
+};
+
+/* The instance data of a given MPIC */
+struct mpic
+{
+	/* The remapper for this MPIC */
+	struct irq_host		*irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip		hc_irq;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	struct irq_chip		hc_ht_irq;
+#endif
+#ifdef CONFIG_SMP
+	struct irq_chip		hc_ipi;
+#endif
+	const char		*name;
+	/* Flags */
+	unsigned int		flags;
+	/* How many irq sources in a given ISU */
+	unsigned int		isu_size;
+	unsigned int		isu_shift;
+	unsigned int		isu_mask;
+	unsigned int		irq_count;
+	/* Number of sources */
+	unsigned int		num_sources;
+	/* Number of CPUs */
+	unsigned int		num_cpus;
+	/* default senses array */
+	unsigned char		*senses;
+	unsigned int		senses_count;
+
+	/* vector numbers used for internal sources (ipi/timers) */
+	unsigned int		ipi_vecs[4];
+	unsigned int		timer_vecs[4];
+
+	/* Spurious vector to program into unused sources */
+	unsigned int		spurious_vec;
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	/* The fixup table */
+	struct mpic_irq_fixup	*fixups;
+	spinlock_t		fixup_lock;
+#endif
+
+	/* Register access method */
+	enum mpic_reg_type	reg_type;
+
+	/* The various ioremap'ed bases */
+	struct mpic_reg_bank	gregs;
+	struct mpic_reg_bank	tmregs;
+	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
+	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
+
+	/* Protected sources */
+	unsigned long		*protected;
+
+#ifdef CONFIG_MPIC_WEIRD
+	/* Pointer to HW info array */
+	u32			*hw_set;
+#endif
+
+#ifdef CONFIG_PCI_MSI
+	spinlock_t		bitmap_lock;
+	unsigned long		*hwirq_bitmap;
+#endif
+
+#ifdef CONFIG_MPIC_BROKEN_REGREAD
+	u32			isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
+#endif
+
+	/* link */
+	struct mpic		*next;
+
+	struct sys_device	sysdev;
+
+#ifdef CONFIG_PM
+	struct mpic_irq_save	*save_data;
+#endif
+};
+
+/*
+ * MPIC flags (passed to mpic_alloc)
+ *
+ * The top 4 bits contain an MPIC bhw id that is used to index the
+ * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
+ * Note setting any ID (leaving those bits to 0) means standard MPIC
+ */
+
+/* This is the primary controller, only that one has IPIs and
+ * has afinity control. A non-primary MPIC always uses CPU0
+ * registers only
+ */
+#define MPIC_PRIMARY			0x00000001
+
+/* Set this for a big-endian MPIC */
+#define MPIC_BIG_ENDIAN			0x00000002
+/* Broken U3 MPIC */
+#define MPIC_U3_HT_IRQS			0x00000004
+/* Broken IPI registers (autodetected) */
+#define MPIC_BROKEN_IPI			0x00000008
+/* MPIC wants a reset */
+#define MPIC_WANTS_RESET		0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI			0x00000020
+/* No passthrough disable */
+#define MPIC_NO_PTHROU_DIS		0x00000040
+/* DCR based MPIC */
+#define MPIC_USES_DCR			0x00000080
+/* MPIC has 11-bit vector fields (or larger) */
+#define MPIC_LARGE_VECTORS		0x00000100
+/* Enable delivery of prio 15 interrupts as MCK instead of EE */
+#define MPIC_ENABLE_MCK			0x00000200
+/* Disable bias among target selection, spread interrupts evenly */
+#define MPIC_NO_BIAS			0x00000400
+/* Ignore NIRQS as reported by FRR */
+#define MPIC_BROKEN_FRR_NIRQS		0x00000800
+
+/* MPIC HW modification ID */
+#define MPIC_REGSET_MASK		0xf0000000
+#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)
+#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf)
+
+#define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */
+#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
+
+/* Allocate the controller structure and setup the linux irq descs
+ * for the range if interrupts passed in. No HW initialization is
+ * actually performed.
+ * 
+ * @phys_addr:	physial base address of the MPIC
+ * @flags:	flags, see constants above
+ * @isu_size:	number of interrupts in an ISU. Use 0 to use a
+ *              standard ISU-less setup (aka powermac)
+ * @irq_offset: first irq number to assign to this mpic
+ * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
+ *	        to match the number of sources
+ * @ipi_offset: first irq number to assign to this mpic IPI sources,
+ *		used only on primary mpic
+ * @senses:	array of sense values
+ * @senses_num: number of entries in the array
+ *
+ * Note about the sense array. If none is passed, all interrupts are
+ * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
+ * case they are edge positive (and the array is ignored anyway).
+ * The values in the array start at the first source of the MPIC,
+ * that is senses[0] correspond to linux irq "irq_offset".
+ */
+extern struct mpic *mpic_alloc(struct device_node *node,
+			       phys_addr_t phys_addr,
+			       unsigned int flags,
+			       unsigned int isu_size,
+			       unsigned int irq_count,
+			       const char *name);
+
+/* Assign ISUs, to call before mpic_init()
+ *
+ * @mpic:	controller structure as returned by mpic_alloc()
+ * @isu_num:	ISU number
+ * @phys_addr:	physical address of the ISU
+ */
+extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+			    phys_addr_t phys_addr);
+
+/* Set default sense codes
+ *
+ * @mpic:	controller
+ * @senses:	array of sense codes
+ * @count:	size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
+/* Initialize the controller. After this has been called, none of the above
+ * should be called again for this mpic
+ */
+extern void mpic_init(struct mpic *mpic);
+
+/*
+ * All of the following functions must only be used after the
+ * ISUs have been assigned and the controller fully initialized
+ * with mpic_init()
+ */
+
+
+/* Change the priority of an interrupt. Default is 8 for irqs and
+ * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
+ * IPI number is then the offset'ed (linux irq number mapped to the IPI)
+ */
+extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
+
+/* Setup a non-boot CPU */
+extern void mpic_setup_this_cpu(void);
+
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(int secondary);
+
+/* Get the current cpu priority for this cpu (0..15) */
+extern int mpic_cpu_get_priority(void);
+
+/* Set the current cpu priority for this cpu */
+extern void mpic_cpu_set_priority(int prio);
+
+/* Request IPIs on primary mpic */
+extern void mpic_request_ipis(void);
+
+/* Send an IPI (non offseted number 0..3) */
+extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
+
+/* Send a message (IPI) to a given target (cpu number or MSG_*) */
+void smp_mpic_message_pass(int target, int msg);
+
+/* Unmask a specific virq */
+extern void mpic_unmask_irq(unsigned int irq);
+/* Mask a specific virq */
+extern void mpic_mask_irq(unsigned int irq);
+/* EOI a specific virq */
+extern void mpic_end_irq(unsigned int irq);
+
+/* Fetch interrupt from a given mpic */
+extern unsigned int mpic_get_one_irq(struct mpic *mpic);
+/* This one gets from the primary mpic */
+extern unsigned int mpic_get_irq(void);
+/* Fetch Machine Check interrupt from primary mpic */
+extern unsigned int mpic_get_mcirq(void);
+
+/* Set the EPIC clock ratio */
+void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
+
+/* Enable/Disable EPIC serial interrupt mode */
+void mpic_set_serial_int(struct mpic *mpic, int enable);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h
new file mode 100644
index 000000000000..dd76743c7537
--- /dev/null
+++ b/arch/powerpc/include/asm/msgbuf.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_MSGBUF_H
+#define _ASM_POWERPC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for the PowerPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifndef __powerpc64__
+	unsigned int	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __powerpc64__
+	unsigned int	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __powerpc64__
+	unsigned int	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif	/* _ASM_POWERPC_MSGBUF_H */
diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/powerpc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
new file mode 100644
index 000000000000..efde5ac82f7b
--- /dev/null
+++ b/arch/powerpc/include/asm/nvram.h
@@ -0,0 +1,139 @@
+/*
+ * NVRAM definitions and access functions.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_NVRAM_H
+#define _ASM_POWERPC_NVRAM_H
+
+#include <linux/errno.h>
+
+#define NVRW_CNT 0x20
+#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
+#define NVRAM_BLOCK_LEN 16
+#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
+#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
+
+#define NVRAM_AS0  0x74
+#define NVRAM_AS1  0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS	0x1FF9
+#define MOTO_RTC_MINUTES	0x1FFA
+#define MOTO_RTC_HOURS		0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK	0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
+#define MOTO_RTC_MONTH		0x1FFE
+#define MOTO_RTC_YEAR		0x1FFF
+#define MOTO_RTC_CONTROLA       0x1FF8
+#define MOTO_RTC_CONTROLB       0x1FF9
+
+#define NVRAM_SIG_SP	0x02	/* support processor */
+#define NVRAM_SIG_OF	0x50	/* open firmware config */
+#define NVRAM_SIG_FW	0x51	/* general firmware */
+#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
+#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
+#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
+#define NVRAM_SIG_SYS	0x70	/* system env vars */
+#define NVRAM_SIG_CFG	0x71	/* config data */
+#define NVRAM_SIG_ELOG	0x72	/* error log */
+#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
+#define NVRAM_SIG_FREE	0x7f	/* Free space */
+#define NVRAM_SIG_OS	0xa0	/* OS defined */
+#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
+
+/* If change this size, then change the size of NVNAME_LEN */
+struct nvram_header {
+	unsigned char signature;
+	unsigned char checksum;
+	unsigned short length;
+	char name[12];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+struct nvram_partition {
+	struct list_head partition;
+	struct nvram_header header;
+	unsigned int index;
+};
+
+
+extern int nvram_write_error_log(char * buff, int length,
+					 unsigned int err_type, unsigned int err_seq);
+extern int nvram_read_error_log(char * buff, int length,
+					 unsigned int * err_type, unsigned int *err_seq);
+extern int nvram_clear_error_log(void);
+extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
+
+extern int pSeries_nvram_init(void);
+
+#ifdef CONFIG_MMIO_NVRAM
+extern int mmio_nvram_init(void);
+#else
+static inline int mmio_nvram_init(void)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+#ifdef __KERNEL__
+/* Return partition offset in nvram */
+extern int	pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8	pmac_xpram_read(int xpaddr);
+extern void	pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern void	nvram_sync(void);
+
+/* Normal access to NVRAM */
+extern unsigned char nvram_read_byte(int i);
+extern void nvram_write_byte(unsigned char c, int i);
+#endif
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
+
+#endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
new file mode 100644
index 000000000000..3c123990ca2e
--- /dev/null
+++ b/arch/powerpc/include/asm/of_device.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_POWERPC_OF_DEVICE_H
+#define _ASM_POWERPC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node	*node;		/* to be obsoleted */
+	u64			dma_mask;	/* DMA mask */
+	struct device		dev;		/* Generic device interface */
+};
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+					 const char *bus_id,
+					 struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+			    struct kobj_uevent_env *env);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
new file mode 100644
index 000000000000..18659ef72139
--- /dev/null
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_OF_PLATFORM_H
+#define _ASM_POWERPC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+	return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+	of_unregister_driver(drv);
+}
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+				 const struct of_device_id *matches,
+				 struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif	/* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h
new file mode 100644
index 000000000000..0d030f9dea24
--- /dev/null
+++ b/arch/powerpc/include/asm/ohare.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_OHARE_H
+#define _ASM_POWERPC_OHARE_H
+#ifdef __KERNEL__
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ *       check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR	0x34
+#define OHARE_FCR	0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET		1
+#define OH_BAY_POWER_N		2	/* a guess */
+#define OH_BAY_PCI_ENABLE	4	/* a guess */
+#define OH_BAY_IDE_ENABLE	8
+#define OH_BAY_FLOPPY_ENABLE	0x10
+#define OH_IDE0_ENABLE		0x20
+#define OH_IDE0_RESET_N		0x40	/* a guess */
+#define OH_BAY_DEV_MASK		0x1c
+#define OH_BAY_RESET_N		0x80
+#define OH_IOBUS_ENABLE		0x100	/* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE		0x200
+#define OH_MESH_ENABLE		0x400
+#define OH_FLOPPY_ENABLE	0x800
+#define OH_SCCA_IO		0x4000
+#define OH_SCCB_IO		0x8000
+#define OH_VIA_ENABLE		0x10000	/* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N		0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES		(OH_IDE_ENABLE | OH_SCC_ENABLE | \
+				 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES	0xbeff7a
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
new file mode 100644
index 000000000000..95035c602ba6
--- /dev/null
+++ b/arch/powerpc/include/asm/oprofile_impl.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
+#define _ASM_POWERPC_OPROFILE_IMPL_H
+#ifdef __KERNEL__
+
+#define OP_MAX_COUNTER 8
+
+/* Per-counter configuration as set via oprofilefs.  */
+struct op_counter_config {
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long count;
+	/* Classic doesn't support per-counter user/kernel selection */
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs.  */
+struct op_system_config {
+#ifdef CONFIG_PPC64
+	unsigned long mmcr0;
+	unsigned long mmcr1;
+	unsigned long mmcra;
+#endif
+	unsigned long enable_kernel;
+	unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_powerpc_model {
+	int (*reg_setup) (struct op_counter_config *,
+			   struct op_system_config *,
+			   int num_counters);
+	int  (*cpu_setup) (struct op_counter_config *);
+	int  (*start) (struct op_counter_config *);
+	int  (*global_start) (struct op_counter_config *);
+	void (*stop) (void);
+	void (*global_stop) (void);
+	int (*sync_start)(void);
+	int (*sync_stop)(void);
+	void (*handle_interrupt) (struct pt_regs *,
+				  struct op_counter_config *);
+	int num_counters;
+};
+
+extern struct op_powerpc_model op_model_fsl_emb;
+extern struct op_powerpc_model op_model_rs64;
+extern struct op_powerpc_model op_model_power4;
+extern struct op_powerpc_model op_model_7450;
+extern struct op_powerpc_model op_model_cell;
+extern struct op_powerpc_model op_model_pa6t;
+
+
+/* All the classic PPC parts use these */
+static inline unsigned int classic_ctr_read(unsigned int i)
+{
+	switch(i) {
+	case 0:
+		return mfspr(SPRN_PMC1);
+	case 1:
+		return mfspr(SPRN_PMC2);
+	case 2:
+		return mfspr(SPRN_PMC3);
+	case 3:
+		return mfspr(SPRN_PMC4);
+	case 4:
+		return mfspr(SPRN_PMC5);
+	case 5:
+		return mfspr(SPRN_PMC6);
+
+/* No PPC32 chip has more than 6 so far */
+#ifdef CONFIG_PPC64
+	case 6:
+		return mfspr(SPRN_PMC7);
+	case 7:
+		return mfspr(SPRN_PMC8);
+#endif
+	default:
+		return 0;
+	}
+}
+
+static inline void classic_ctr_write(unsigned int i, unsigned int val)
+{
+	switch(i) {
+	case 0:
+		mtspr(SPRN_PMC1, val);
+		break;
+	case 1:
+		mtspr(SPRN_PMC2, val);
+		break;
+	case 2:
+		mtspr(SPRN_PMC3, val);
+		break;
+	case 3:
+		mtspr(SPRN_PMC4, val);
+		break;
+	case 4:
+		mtspr(SPRN_PMC5, val);
+		break;
+	case 5:
+		mtspr(SPRN_PMC6, val);
+		break;
+
+/* No PPC32 chip has more than 6, yet */
+#ifdef CONFIG_PPC64
+	case 6:
+		mtspr(SPRN_PMC7, val);
+		break;
+	case 7:
+		mtspr(SPRN_PMC8, val);
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+
+extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
new file mode 100644
index 000000000000..e482e5352e69
--- /dev/null
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -0,0 +1,29 @@
+#ifndef _PPC64_PSERIES_RECONFIG_H
+#define _PPC64_PSERIES_RECONFIG_H
+#ifdef __KERNEL__
+
+#include <linux/notifier.h>
+
+/*
+ * Use this API if your code needs to know about OF device nodes being
+ * added or removed on pSeries systems.
+ */
+
+#define PSERIES_RECONFIG_ADD		0x0001
+#define PSERIES_RECONFIG_REMOVE		0x0002
+#define PSERIES_DRCONF_MEM_ADD		0x0003
+#define PSERIES_DRCONF_MEM_REMOVE	0x0004
+
+#ifdef CONFIG_PPC_PSERIES
+extern int pSeries_reconfig_notifier_register(struct notifier_block *);
+extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+#else /* !CONFIG_PPC_PSERIES */
+static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
new file mode 100644
index 000000000000..6493a395508b
--- /dev/null
+++ b/arch/powerpc/include/asm/paca.h
@@ -0,0 +1,112 @@
+/*
+ * This control block defines the PACA which defines the processor
+ * specific data for each logical processor on the system.
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PACA_H
+#define _ASM_POWERPC_PACA_H
+#ifdef __KERNEL__
+
+#include	<asm/types.h>
+#include	<asm/lppaca.h>
+#include	<asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+
+#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
+extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
+/*
+ * Add standard checks that preemption cannot occur when using get_paca():
+ * otherwise the paca_struct it points to may be the wrong one just after.
+ */
+#define get_paca()	((void) debug_smp_processor_id(), local_paca)
+#else
+#define get_paca()	local_paca
+#endif
+
+#define get_lppaca()	(get_paca()->lppaca_ptr)
+#define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
+
+struct task_struct;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor.
+ */
+struct paca_struct {
+	/*
+	 * Because hw_cpu_id, unlike other paca fields, is accessed
+	 * routinely from other CPUs (from the IRQ code), we stick to
+	 * read-only (after boot) fields in the first cacheline to
+	 * avoid cacheline bouncing.
+	 */
+
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+
+	/*
+	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
+	 * load lock_token and paca_index with a single lwz
+	 * instruction.  They must travel together and be properly
+	 * aligned.
+	 */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+	u16 paca_index;			/* Logical processor number */
+
+	u64 kernel_toc;			/* Kernel TOC address */
+	u64 stab_real;			/* Absolute address of segment table */
+	u64 stab_addr;			/* Virtual address of segment table */
+	void *emergency_sp;		/* pointer to emergency stack */
+	u64 data_offset;		/* per cpu data offset */
+	s16 hw_cpu_id;			/* Physical processor number */
+	u8 cpu_start;			/* At startup, processor spins until */
+					/* this becomes non-zero. */
+	struct slb_shadow *slb_shadow_ptr;
+
+	/*
+	 * Now, starting in cacheline 2, the exception save areas
+	 */
+	/* used for most interrupts/exceptions */
+	u64 exgen[10] __attribute__((aligned(0x80)));
+	u64 exmc[10];		/* used for machine checks */
+	u64 exslb[10];		/* used for SLB/segment table misses
+ 				 * on the linear mapping */
+
+	mm_context_t context;
+	u16 vmalloc_sllp;
+	u16 slb_cache_ptr;
+	u16 slb_cache[SLB_CACHE_ENTRIES];
+
+	/*
+	 * then miscellaneous read-write fields
+	 */
+	struct task_struct *__current;	/* Pointer to current */
+	u64 kstack;			/* Saved Kernel stack addr */
+	u64 stab_rr;			/* stab/slb round-robin counter */
+	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_msr;			/* MSR saved here by enter_rtas */
+	u16 trap_save;			/* Used when bad stack is encountered */
+	u8 soft_enabled;		/* irq soft-enable flag */
+	u8 hard_enabled;		/* set if irqs are enabled in MSR */
+	u8 io_sync;			/* writel() needs spin_unlock sync */
+
+	/* Stuff for accurate time accounting */
+	u64 user_time;			/* accumulated usermode TB ticks */
+	u64 system_time;		/* accumulated system TB ticks */
+	u64 startpurr;			/* PURR/TB value snapshot */
+	u64 startspurr;			/* SPURR value snapshot */
+};
+
+extern struct paca_struct paca[];
+extern void initialise_pacas(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
new file mode 100644
index 000000000000..e088545cb3f5
--- /dev/null
+++ b/arch/powerpc/include/asm/page.h
@@ -0,0 +1,225 @@
+#ifndef _ASM_POWERPC_PAGE_H
+#define _ASM_POWERPC_PAGE_H
+
+/*
+ * Copyright (C) 2001,2005 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/kdump.h>
+#include <asm/types.h>
+
+/*
+ * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
+ * page size. When using 64K pages however, whether we are really supporting
+ * 64K pages in HW or not is irrelevant to those definitions.
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+#define PAGE_SHIFT		16
+#else
+#define PAGE_SHIFT		12
+#endif
+
+#define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
+
+/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
+#define __HAVE_ARCH_GATE_AREA		1
+
+/*
+ * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
+ * assign PAGE_MASK to a larger type it gets extended the way we want
+ * (i.e. with 1s in the high bits)
+ */
+#define PAGE_MASK      (~((1 << PAGE_SHIFT) - 1))
+
+/*
+ * KERNELBASE is the virtual address of the start of the kernel, it's often
+ * the same as PAGE_OFFSET, but _might not be_.
+ *
+ * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
+ *
+ * PAGE_OFFSET is the virtual address of the start of lowmem.
+ *
+ * PHYSICAL_START is the physical address of the start of the kernel.
+ *
+ * MEMORY_START is the physical address of the start of lowmem.
+ *
+ * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
+ * ppc32 and based on how they are set we determine MEMORY_START.
+ *
+ * For the linear mapping the following equation should be true:
+ * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
+ *
+ * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
+ *
+ * There are two was to determine a physical address from a virtual one:
+ * va = pa + PAGE_OFFSET - MEMORY_START
+ * va = pa + KERNELBASE - PHYSICAL_START
+ *
+ * If you want to know something's offset from the start of the kernel you
+ * should subtract KERNELBASE.
+ *
+ * If you want to test if something's a kernel address, use is_kernel_addr().
+ */
+
+#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
+#define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
+
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#ifndef __ASSEMBLY__
+extern phys_addr_t memstart_addr;
+extern phys_addr_t kernstart_addr;
+#endif
+#define PHYSICAL_START	kernstart_addr
+#define MEMORY_START	memstart_addr
+#else
+#define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
+#define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
+#endif
+
+#ifdef CONFIG_FLATMEM
+#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+
+/*
+ * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
+ * and needs to be executable.  This means the whole heap ends
+ * up being executable.
+ */
+#define VM_DATA_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifdef __powerpc64__
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
+
+/*
+ * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
+ * "kernelness", use is_kernel_addr() - it should do what you want.
+ */
+#define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
+
+#ifndef __ASSEMBLY__
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking. */
+
+/* PTE level */
+typedef struct { pte_basic_t pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
+
+/* 64k pages additionally define a bigger "real PTE" type that gathers
+ * the "second half" part of the PTE for pseudo 64k pages
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef struct { pte_t pte; } real_pte_t;
+#endif
+
+/* PMD level */
+#ifdef CONFIG_PPC64
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
+
+/* PUD level exusts only on 4k pages */
+#ifndef CONFIG_PPC_64K_PAGES
+typedef struct { unsigned long pud; } pud_t;
+#define pud_val(x)	((x).pud)
+#define __pud(x)	((pud_t) { (x) })
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+/* PGD level */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+/* Page protection bits */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#else
+
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef pte_basic_t pte_t;
+#define pte_val(x)	(x)
+#define __pte(x)	(x)
+
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef unsigned long real_pte_t;
+#endif
+
+
+#ifdef CONFIG_PPC64
+typedef unsigned long pmd_t;
+#define pmd_val(x)	(x)
+#define __pmd(x)	(x)
+
+#ifndef CONFIG_PPC_64K_PAGES
+typedef unsigned long pud_t;
+#define pud_val(x)	(x)
+#define __pud(x)	(x)
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+typedef unsigned long pgd_t;
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+typedef unsigned long pgprot_t;
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif
+
+struct page;
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr,
+		struct page *p);
+extern int page_is_ram(unsigned long pfn);
+
+struct vm_area_struct;
+
+typedef struct page *pgtable_t;
+
+#include <asm-generic/memory_model.h>
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
new file mode 100644
index 000000000000..ebfae530a379
--- /dev/null
+++ b/arch/powerpc/include/asm/page_32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_POWERPC_PAGE_32_H
+#define _ASM_POWERPC_PAGE_32_H
+
+#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
+#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
+#endif
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
+ * physical addressing.  For now this just the IBM PPC440.
+ */
+#ifdef CONFIG_PTE_64BIT
+typedef unsigned long long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 3)	/* 512 ptes per page */
+#else
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#endif
+
+struct page;
+extern void clear_pages(void *page, int order);
+static inline void clear_page(void *page) { clear_pages(page, 0); }
+extern void copy_page(void *to, void *from);
+
+#include <asm-generic/page.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
new file mode 100644
index 000000000000..043bfdfe4f73
--- /dev/null
+++ b/arch/powerpc/include/asm/page_64.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_POWERPC_PAGE_64_H
+#define _ASM_POWERPC_PAGE_64_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
+ * specific, every notion of page number shared with the firmware, TCEs,
+ * iommu, etc... still uses a page size of 4K.
+ */
+#define HW_PAGE_SHIFT		12
+#define HW_PAGE_SIZE		(ASM_CONST(1) << HW_PAGE_SHIFT)
+#define HW_PAGE_MASK		(~(HW_PAGE_SIZE-1))
+
+/*
+ * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and
+ * HW_PAGE_SHIFT, that is 4K pages.
+ */
+#define PAGE_FACTOR		(PAGE_SHIFT - HW_PAGE_SHIFT)
+
+/* Segment size; normal 256M segments */
+#define SID_SHIFT		28
+#define SID_MASK		ASM_CONST(0xfffffffff)
+#define ESID_MASK		0xfffffffff0000000UL
+#define GET_ESID(x)		(((x) >> SID_SHIFT) & SID_MASK)
+
+/* 1T segments */
+#define SID_SHIFT_1T		40
+#define SID_MASK_1T		0xffffffUL
+#define ESID_MASK_1T		0xffffff0000000000UL
+#define GET_ESID_1T(x)		(((x) >> SID_SHIFT_1T) & SID_MASK_1T)
+
+#ifndef __ASSEMBLY__
+#include <asm/cache.h>
+
+typedef unsigned long pte_basic_t;
+
+static __inline__ void clear_page(void *addr)
+{
+	unsigned long lines, line_size;
+
+	line_size = ppc64_caches.dline_size;
+	lines = ppc64_caches.dlines_per_page;
+
+	__asm__ __volatile__(
+	"mtctr	%1	# clear_page\n\
+1:      dcbz	0,%0\n\
+	add	%0,%0,%3\n\
+	bdnz+	1b"
+        : "=r" (addr)
+        : "r" (lines), "0" (addr), "r" (line_size)
+	: "ctr", "memory");
+}
+
+extern void copy_4K_page(void *to, void *from);
+
+#ifdef CONFIG_PPC_64K_PAGES
+static inline void copy_page(void *to, void *from)
+{
+	unsigned int i;
+	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
+		copy_4K_page(to, from);
+		to += 4096;
+		from += 4096;
+	}
+}
+#else /* CONFIG_PPC_64K_PAGES */
+static inline void copy_page(void *to, void *from)
+{
+	copy_4K_page(to, from);
+}
+#endif /* CONFIG_PPC_64K_PAGES */
+
+/* Log 2 of page table size */
+extern u64 ppc64_pft_size;
+
+/* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		3
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#define SLICE_LOW_SHIFT		28
+#define SLICE_HIGH_SHIFT	40
+
+#define SLICE_LOW_TOP		(0x100000000ul)
+#define SLICE_NUM_LOW		(SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
+#define SLICE_NUM_HIGH		(PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
+
+#define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
+#define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+struct slice_mask {
+	u16 low_slices;
+	u16 high_slices;
+};
+
+struct mm_struct;
+
+extern unsigned long slice_get_unmapped_area(unsigned long addr,
+					     unsigned long len,
+					     unsigned long flags,
+					     unsigned int psize,
+					     int topdown,
+					     int use_cache);
+
+extern unsigned int get_slice_psize(struct mm_struct *mm,
+				    unsigned long addr);
+
+extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+				  unsigned long len, unsigned int psize);
+
+#define slice_mm_new_context(mm)	((mm)->context.id == 0)
+
+#endif /* __ASSEMBLY__ */
+#else
+#define slice_init()
+#define get_slice_psize(mm, addr)	((mm)->context.user_psize)
+#define slice_set_user_psize(mm, psize)		\
+do {						\
+	(mm)->context.user_psize = (psize);	\
+	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
+} while (0)
+#define slice_set_range_psize(mm, start, len, psize)	\
+	slice_set_user_psize((mm), (psize))
+#define slice_mm_new_context(mm)	1
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+#ifdef MODULE
+#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
+#else
+#define __page_aligned \
+	__attribute__((__aligned__(PAGE_SIZE), \
+		__section__(".data.page_aligned")))
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
+
+/*
+ * This is the default if a program doesn't have a PT_GNU_STACK
+ * program header entry. The PPC64 ELF ABI has a non executable stack
+ * stack by default, so in the absense of a PT_GNU_STACK program header
+ * we turn execute permission off.
+ */
+#define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
+
+#include <asm-generic/page.h>
+
+#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h
new file mode 100644
index 000000000000..094f63d4d5ca
--- /dev/null
+++ b/arch/powerpc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_PARAM_H
+#define _ASM_POWERPC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
+#define USER_HZ		100		/* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif	/* _ASM_POWERPC_PARAM_H */
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
new file mode 100644
index 000000000000..414c50e2e881
--- /dev/null
+++ b/arch/powerpc/include/asm/parport.h
@@ -0,0 +1,39 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_POWERPC_PARPORT_H
+#define _ASM_POWERPC_PARPORT_H
+#ifdef __KERNEL__
+
+#include <asm/prom.h>
+
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	struct device_node *np;
+	const u32 *prop;
+	u32 io1, io2;
+	int propsize;
+	int count = 0;
+	for (np = NULL; (np = of_find_compatible_node(np,
+						      "parallel",
+						      "pnpPNP,400")) != NULL;) {
+		prop = of_get_property(np, "reg", &propsize);
+		if (!prop || propsize > 6*sizeof(u32))
+			continue;
+		io1 = prop[1]; io2 = prop[2];
+		prop = of_get_property(np, "interrupts", NULL);
+		if (!prop)
+			continue;
+		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+			count++;
+	}
+	return count;
+}
+
+#endif /* __KERNEL__ */
+#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
new file mode 100644
index 000000000000..19fd7933e2d9
--- /dev/null
+++ b/arch/powerpc/include/asm/pasemi_dma.h
@@ -0,0 +1,538 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Hardware register layout and descriptor formats for the on-board
+ * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
+ * drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef ASM_PASEMI_DMA_H
+#define ASM_PASEMI_DMA_H
+
+/* status register layout in IOB region, at 0xfb800000 */
+struct pasdma_status {
+	u64 rx_sta[64];		/* RX channel status */
+	u64 tx_sta[20];		/* TX channel status */
+};
+
+
+/* All these registers live in the PCI configuration space for the DMA PCI
+ * device. Use the normal PCI config access functions for them.
+ */
+enum {
+	PAS_DMA_CAP_TXCH  = 0x44,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_RXCH  = 0x48,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_IFI	  = 0x4c,	/* Interface Info	      */
+	PAS_DMA_COM_TXCMD = 0x100,	/* Transmit Command Register  */
+	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
+	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
+	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
+	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
+	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
+};
+
+
+#define PAS_DMA_CAP_TXCH_TCHN_M	0x00ff0000 /* # of TX channels */
+#define PAS_DMA_CAP_TXCH_TCHN_S	16
+
+#define PAS_DMA_CAP_RXCH_RCHN_M	0x00ff0000 /* # of RX channels */
+#define PAS_DMA_CAP_RXCH_RCHN_S	16
+
+#define PAS_DMA_CAP_IFI_IOFF_M	0xff000000 /* Cfg reg for intf pointers */
+#define PAS_DMA_CAP_IFI_IOFF_S	24
+#define PAS_DMA_CAP_IFI_NIN_M	0x00ff0000 /* # of interfaces */
+#define PAS_DMA_CAP_IFI_NIN_S	16
+
+#define PAS_DMA_COM_TXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_TXSTA_ACT	0x00000001 /* active */
+#define PAS_DMA_COM_RXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_RXSTA_ACT	0x00000001 /* active */
+
+
+/* Per-interface and per-channel registers */
+#define _PAS_DMA_RXINT_STRIDE		0x20
+#define PAS_DMA_RXINT_RCMDSTA(i)	(0x200+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_RCMDSTA_EN	0x00000001
+#define    PAS_DMA_RXINT_RCMDSTA_ST	0x00000002
+#define    PAS_DMA_RXINT_RCMDSTA_MBT	0x00000008
+#define    PAS_DMA_RXINT_RCMDSTA_MDR	0x00000010
+#define    PAS_DMA_RXINT_RCMDSTA_MOO	0x00000020
+#define    PAS_DMA_RXINT_RCMDSTA_MBP	0x00000040
+#define    PAS_DMA_RXINT_RCMDSTA_BT	0x00000800
+#define    PAS_DMA_RXINT_RCMDSTA_DR	0x00001000
+#define    PAS_DMA_RXINT_RCMDSTA_OO	0x00002000
+#define    PAS_DMA_RXINT_RCMDSTA_BP	0x00004000
+#define    PAS_DMA_RXINT_RCMDSTA_TB	0x00008000
+#define    PAS_DMA_RXINT_RCMDSTA_ACT	0x00010000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_M	0xfffe0000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_S	17
+#define PAS_DMA_RXINT_CFG(i)		(0x204+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_CFG_RBP	0x80000000
+#define    PAS_DMA_RXINT_CFG_ITRR	0x40000000
+#define    PAS_DMA_RXINT_CFG_DHL_M	0x07000000
+#define    PAS_DMA_RXINT_CFG_DHL_S	24
+#define    PAS_DMA_RXINT_CFG_DHL(x)	(((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
+					 PAS_DMA_RXINT_CFG_DHL_M)
+#define    PAS_DMA_RXINT_CFG_ITR	0x00400000
+#define    PAS_DMA_RXINT_CFG_LW		0x00200000
+#define    PAS_DMA_RXINT_CFG_L2		0x00100000
+#define    PAS_DMA_RXINT_CFG_HEN	0x00080000
+#define    PAS_DMA_RXINT_CFG_WIF	0x00000002
+#define    PAS_DMA_RXINT_CFG_WIL	0x00000001
+
+#define PAS_DMA_RXINT_INCR(i)		(0x210+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_INCR_INCR_M	0x0000ffff
+#define    PAS_DMA_RXINT_INCR_INCR_S	0
+#define    PAS_DMA_RXINT_INCR_INCR(x)	((x) & 0x0000ffff)
+#define PAS_DMA_RXINT_BASEL(i)		(0x218+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEL_BRBL(x)	((x) & ~0x3f)
+#define PAS_DMA_RXINT_BASEU(i)		(0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEU_BRBH(x)	((x) & 0xfff)
+#define    PAS_DMA_RXINT_BASEU_SIZ_M	0x3fff0000	/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXINT_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXINT_BASEU_SIZ(x)	(((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
+					 PAS_DMA_RXINT_BASEU_SIZ_M)
+
+
+#define _PAS_DMA_TXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_TXCHAN_TCMDSTA	0x300	/* Command / Status		*/
+#define _PAS_DMA_TXCHAN_CFG	0x304	/* Configuration		*/
+#define _PAS_DMA_TXCHAN_DSCRBU	0x308	/* Descriptor BU Allocation	*/
+#define _PAS_DMA_TXCHAN_INCR	0x310	/* Descriptor increment		*/
+#define _PAS_DMA_TXCHAN_CNT	0x314	/* Descriptor count/offset	*/
+#define _PAS_DMA_TXCHAN_BASEL	0x318	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_TXCHAN_BASEU	0x31c	/*			(high)	*/
+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_TCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_TXCHAN_TCMDSTA_SZ	0x00000800
+#define    PAS_DMA_TXCHAN_TCMDSTA_DB	0x00000400
+#define    PAS_DMA_TXCHAN_TCMDSTA_DE	0x00000200
+#define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
+#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
+#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
+#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
+#define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
+#define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
+#define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+					 PAS_DMA_TXCHAN_CFG_TATTR_M)
+#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
+#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
+#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
+#define    PAS_DMA_TXCHAN_CFG_WT_S	6
+#define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+					 PAS_DMA_TXCHAN_CFG_WT_M)
+#define    PAS_DMA_TXCHAN_CFG_TRD	0x00010000	/* translate data */
+#define    PAS_DMA_TXCHAN_CFG_TRR	0x00008000	/* translate rings */
+#define    PAS_DMA_TXCHAN_CFG_UP	0x00004000	/* update tx descr when sent */
+#define    PAS_DMA_TXCHAN_CFG_CL	0x00002000	/* Clean last line */
+#define    PAS_DMA_TXCHAN_CFG_CF	0x00001000	/* Clean first line */
+#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_TXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_TXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_TXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_TXCHAN_BASEU_SIZ_M)
+
+#define _PAS_DMA_RXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_RXCHAN_CCMDSTA	0x800	/* Command / Status		*/
+#define _PAS_DMA_RXCHAN_CFG	0x804	/* Configuration		*/
+#define _PAS_DMA_RXCHAN_INCR	0x810	/* Descriptor increment		*/
+#define _PAS_DMA_RXCHAN_CNT	0x814	/* Descriptor count/offset	*/
+#define _PAS_DMA_RXCHAN_BASEL	0x818	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_RXCHAN_BASEU	0x81c	/*			(high)	*/
+#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_RXCHAN_CCMDSTA_DU	0x00020000
+#define    PAS_DMA_RXCHAN_CCMDSTA_OD	0x00002000
+#define    PAS_DMA_RXCHAN_CCMDSTA_FD	0x00001000
+#define    PAS_DMA_RXCHAN_CCMDSTA_DT	0x00000800
+#define PAS_DMA_RXCHAN_CFG(c)     (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CFG_CTR	0x00000400
+#define    PAS_DMA_RXCHAN_CFG_HBU_M	0x00000380
+#define    PAS_DMA_RXCHAN_CFG_HBU_S	7
+#define    PAS_DMA_RXCHAN_CFG_HBU(x)	(((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
+					 PAS_DMA_RXCHAN_CFG_HBU_M)
+#define PAS_DMA_RXCHAN_INCR(c)    (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEL(c)   (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_RXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_RXCHAN_BASEU(c)   (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_RXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_RXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_RXCHAN_BASEU_SIZ_M)
+
+#define    PAS_STATUS_PCNT_M		0x000000000000ffffull
+#define    PAS_STATUS_PCNT_S		0
+#define    PAS_STATUS_DCNT_M		0x00000000ffff0000ull
+#define    PAS_STATUS_DCNT_S		16
+#define    PAS_STATUS_BPCNT_M		0x0000ffff00000000ull
+#define    PAS_STATUS_BPCNT_S		32
+#define    PAS_STATUS_CAUSE_M		0xf000000000000000ull
+#define    PAS_STATUS_TIMER		0x1000000000000000ull
+#define    PAS_STATUS_ERROR		0x2000000000000000ull
+#define    PAS_STATUS_SOFT		0x4000000000000000ull
+#define    PAS_STATUS_INT		0x8000000000000000ull
+
+#define PAS_IOB_COM_PKTHDRCNT		0x120
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M	0x0fff0000
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S	16
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M	0x00000fff
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S	0
+
+#define PAS_IOB_DMA_RXCH_CFG(i)		(0x1100 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_TXCH_CFG(i)		(0x1200 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_RXCH_STAT(i)	(0x1300 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_TXCH_STAT(i)	(0x1400 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_RXCH_RESET(i)	(0x1500 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_RXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_RXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_RXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_RXCH_RESET_PINTC		0x00000001
+#define PAS_IOB_DMA_TXCH_RESET(i)	(0x1600 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_TXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_TXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_TXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_TXCH_RESET_PINTC		0x00000001
+
+#define PAS_IOB_DMA_COM_TIMEOUTCFG		0x1700
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M	0x00ffffff
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S	0
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)	(((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
+						 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
+
+/* Transmit descriptor fields */
+#define	XCT_MACTX_T		0x8000000000000000ull
+#define	XCT_MACTX_ST		0x4000000000000000ull
+#define XCT_MACTX_NORES		0x0000000000000000ull
+#define XCT_MACTX_8BRES		0x1000000000000000ull
+#define XCT_MACTX_24BRES	0x2000000000000000ull
+#define XCT_MACTX_40BRES	0x3000000000000000ull
+#define XCT_MACTX_I		0x0800000000000000ull
+#define XCT_MACTX_O		0x0400000000000000ull
+#define XCT_MACTX_E		0x0200000000000000ull
+#define XCT_MACTX_VLAN_M	0x0180000000000000ull
+#define XCT_MACTX_VLAN_NOP	0x0000000000000000ull
+#define XCT_MACTX_VLAN_REMOVE	0x0080000000000000ull
+#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
+#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
+#define XCT_MACTX_CRC_M		0x0060000000000000ull
+#define XCT_MACTX_CRC_NOP	0x0000000000000000ull
+#define XCT_MACTX_CRC_INSERT	0x0020000000000000ull
+#define XCT_MACTX_CRC_PAD	0x0040000000000000ull
+#define XCT_MACTX_CRC_REPLACE	0x0060000000000000ull
+#define XCT_MACTX_SS		0x0010000000000000ull
+#define XCT_MACTX_LLEN_M	0x00007fff00000000ull
+#define XCT_MACTX_LLEN_S	32ull
+#define XCT_MACTX_LLEN(x)	((((long)(x)) << XCT_MACTX_LLEN_S) & \
+				 XCT_MACTX_LLEN_M)
+#define XCT_MACTX_IPH_M		0x00000000f8000000ull
+#define XCT_MACTX_IPH_S		27ull
+#define XCT_MACTX_IPH(x)	((((long)(x)) << XCT_MACTX_IPH_S) & \
+				 XCT_MACTX_IPH_M)
+#define XCT_MACTX_IPO_M		0x0000000007c00000ull
+#define XCT_MACTX_IPO_S		22ull
+#define XCT_MACTX_IPO(x)	((((long)(x)) << XCT_MACTX_IPO_S) & \
+				 XCT_MACTX_IPO_M)
+#define XCT_MACTX_CSUM_M	0x0000000000000060ull
+#define XCT_MACTX_CSUM_NOP	0x0000000000000000ull
+#define XCT_MACTX_CSUM_TCP	0x0000000000000040ull
+#define XCT_MACTX_CSUM_UDP	0x0000000000000060ull
+#define XCT_MACTX_V6		0x0000000000000010ull
+#define XCT_MACTX_C		0x0000000000000004ull
+#define XCT_MACTX_AL2		0x0000000000000002ull
+
+/* Receive descriptor fields */
+#define	XCT_MACRX_T		0x8000000000000000ull
+#define	XCT_MACRX_ST		0x4000000000000000ull
+#define XCT_MACRX_RR_M		0x3000000000000000ull
+#define XCT_MACRX_RR_NORES	0x0000000000000000ull
+#define XCT_MACRX_RR_8BRES	0x1000000000000000ull
+#define XCT_MACRX_O		0x0400000000000000ull
+#define XCT_MACRX_E		0x0200000000000000ull
+#define XCT_MACRX_FF		0x0100000000000000ull
+#define XCT_MACRX_PF		0x0080000000000000ull
+#define XCT_MACRX_OB		0x0040000000000000ull
+#define XCT_MACRX_OD		0x0020000000000000ull
+#define XCT_MACRX_FS		0x0010000000000000ull
+#define XCT_MACRX_NB_M		0x000fc00000000000ull
+#define XCT_MACRX_NB_S		46ULL
+#define XCT_MACRX_NB(x)		((((long)(x)) << XCT_MACRX_NB_S) & \
+				 XCT_MACRX_NB_M)
+#define XCT_MACRX_LLEN_M	0x00003fff00000000ull
+#define XCT_MACRX_LLEN_S	32ULL
+#define XCT_MACRX_LLEN(x)	((((long)(x)) << XCT_MACRX_LLEN_S) & \
+				 XCT_MACRX_LLEN_M)
+#define XCT_MACRX_CRC		0x0000000080000000ull
+#define XCT_MACRX_LEN_M		0x0000000060000000ull
+#define XCT_MACRX_LEN_TOOSHORT	0x0000000020000000ull
+#define XCT_MACRX_LEN_BELOWMIN	0x0000000040000000ull
+#define XCT_MACRX_LEN_TRUNC	0x0000000060000000ull
+#define XCT_MACRX_CAST_M	0x0000000018000000ull
+#define XCT_MACRX_CAST_UNI	0x0000000000000000ull
+#define XCT_MACRX_CAST_MULTI	0x0000000008000000ull
+#define XCT_MACRX_CAST_BROAD	0x0000000010000000ull
+#define XCT_MACRX_CAST_PAUSE	0x0000000018000000ull
+#define XCT_MACRX_VLC_M		0x0000000006000000ull
+#define XCT_MACRX_FM		0x0000000001000000ull
+#define XCT_MACRX_HTY_M		0x0000000000c00000ull
+#define XCT_MACRX_HTY_IPV4_OK	0x0000000000000000ull
+#define XCT_MACRX_HTY_IPV6 	0x0000000000400000ull
+#define XCT_MACRX_HTY_IPV4_BAD	0x0000000000800000ull
+#define XCT_MACRX_HTY_NONIP	0x0000000000c00000ull
+#define XCT_MACRX_IPP_M		0x00000000003f0000ull
+#define XCT_MACRX_IPP_S		16
+#define XCT_MACRX_CSUM_M	0x000000000000ffffull
+#define XCT_MACRX_CSUM_S	0
+
+#define XCT_PTR_T		0x8000000000000000ull
+#define XCT_PTR_LEN_M		0x7ffff00000000000ull
+#define XCT_PTR_LEN_S		44
+#define XCT_PTR_LEN(x)		((((long)(x)) << XCT_PTR_LEN_S) & \
+				 XCT_PTR_LEN_M)
+#define XCT_PTR_ADDR_M		0x00000fffffffffffull
+#define XCT_PTR_ADDR_S		0
+#define XCT_PTR_ADDR(x)		((((long)(x)) << XCT_PTR_ADDR_S) & \
+				 XCT_PTR_ADDR_M)
+
+/* Receive interface 8byte result fields */
+#define XCT_RXRES_8B_L4O_M	0xff00000000000000ull
+#define XCT_RXRES_8B_L4O_S	56
+#define XCT_RXRES_8B_RULE_M	0x00ffff0000000000ull
+#define XCT_RXRES_8B_RULE_S	40
+#define XCT_RXRES_8B_EVAL_M	0x000000ffff000000ull
+#define XCT_RXRES_8B_EVAL_S	24
+#define XCT_RXRES_8B_HTYPE_M	0x0000000000f00000ull
+#define XCT_RXRES_8B_HASH_M	0x00000000000fffffull
+#define XCT_RXRES_8B_HASH_S	0
+
+/* Receive interface buffer fields */
+#define XCT_RXB_LEN_M		0x0ffff00000000000ull
+#define XCT_RXB_LEN_S		44
+#define XCT_RXB_LEN(x)		((((long)(x)) << XCT_RXB_LEN_S) & \
+				 XCT_RXB_LEN_M)
+#define XCT_RXB_ADDR_M		0x00000fffffffffffull
+#define XCT_RXB_ADDR_S		0
+#define XCT_RXB_ADDR(x)		((((long)(x)) << XCT_RXB_ADDR_S) & \
+				 XCT_RXB_ADDR_M)
+
+/* Copy descriptor fields */
+#define XCT_COPY_T		0x8000000000000000ull
+#define XCT_COPY_ST		0x4000000000000000ull
+#define XCT_COPY_RR_M		0x3000000000000000ull
+#define XCT_COPY_RR_NORES	0x0000000000000000ull
+#define XCT_COPY_RR_8BRES	0x1000000000000000ull
+#define XCT_COPY_RR_24BRES	0x2000000000000000ull
+#define XCT_COPY_RR_40BRES	0x3000000000000000ull
+#define XCT_COPY_I		0x0800000000000000ull
+#define XCT_COPY_O		0x0400000000000000ull
+#define XCT_COPY_E		0x0200000000000000ull
+#define XCT_COPY_STY_ZERO	0x01c0000000000000ull
+#define XCT_COPY_DTY_PREF	0x0038000000000000ull
+#define XCT_COPY_LLEN_M		0x0007ffff00000000ull
+#define XCT_COPY_LLEN_S		32
+#define XCT_COPY_LLEN(x)	((((long)(x)) << XCT_COPY_LLEN_S) & \
+				 XCT_COPY_LLEN_M)
+#define XCT_COPY_SE		0x0000000000000001ull
+
+/* Function descriptor fields */
+#define XCT_FUN_T		0x8000000000000000ull
+#define XCT_FUN_ST		0x4000000000000000ull
+#define XCT_FUN_RR_M		0x3000000000000000ull
+#define XCT_FUN_RR_NORES	0x0000000000000000ull
+#define XCT_FUN_RR_8BRES	0x1000000000000000ull
+#define XCT_FUN_RR_24BRES	0x2000000000000000ull
+#define XCT_FUN_RR_40BRES	0x3000000000000000ull
+#define XCT_FUN_I		0x0800000000000000ull
+#define XCT_FUN_O		0x0400000000000000ull
+#define XCT_FUN_E		0x0200000000000000ull
+#define XCT_FUN_FUN_M		0x01c0000000000000ull
+#define XCT_FUN_FUN_S		54
+#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M		0x0038000000000000ull
+#define XCT_FUN_CRM_NOP		0x0000000000000000ull
+#define XCT_FUN_CRM_SIG		0x0008000000000000ull
+#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S		32
+#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M		0x00000000f8000000ull
+#define XCT_FUN_SHL_S		27
+#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M		0x0000000007c00000ull
+#define XCT_FUN_HSZ_M		0x00000000003c0000ull
+#define XCT_FUN_ALG_M		0x0000000000038000ull
+#define XCT_FUN_HP		0x0000000000004000ull
+#define XCT_FUN_BCM_M		0x0000000000003800ull
+#define XCT_FUN_BCP_M		0x0000000000000600ull
+#define XCT_FUN_SIG_M		0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
+#define XCT_FUN_A		0x0000000000000008ull
+#define XCT_FUN_C		0x0000000000000004ull
+#define XCT_FUN_AL2		0x0000000000000002ull
+#define XCT_FUN_SE		0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S	32
+#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S	0
+
+/* Control descriptor fields */
+#define CTRL_CMD_T		0x8000000000000000ull
+#define CTRL_CMD_META_EVT	0x2000000000000000ull
+#define CTRL_CMD_O		0x0400000000000000ull
+#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
+#define CTRL_CMD_REG_M		0x000000000000007full
+#define CTRL_CMD_REG_S		0
+#define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
+				 CTRL_CMD_REG_M)
+
+
+
+/* Prototypes for the shared DMA functions in the platform code. */
+
+/* DMA TX Channel type. Right now only limitations used are event types 0/1,
+ * for event-triggered DMA transactions.
+ */
+
+enum pasemi_dmachan_type {
+	RXCHAN = 0,		/* Any RX chan */
+	TXCHAN = 1,		/* Any TX chan */
+	TXCHAN_EVT0 = 0x1001,	/* TX chan in event class 0 (chan 0-9) */
+	TXCHAN_EVT1 = 0x2001,	/* TX chan in event class 1 (chan 10-19) */
+};
+
+struct pasemi_dmachan {
+	int		 chno;		/* Channel number */
+	enum pasemi_dmachan_type chan_type;	/* TX / RX */
+	u64		*status;	/* Ptr to cacheable status */
+	int		 irq;		/* IRQ used by channel */
+	unsigned int	 ring_size;	/* size of allocated ring */
+	dma_addr_t	 ring_dma;	/* DMA address for ring */
+	u64		*ring_virt;	/* Virt address for ring */
+	void		*priv;		/* Ptr to start of client struct */
+};
+
+/* Read/write the different registers in the I/O Bridge, Ethernet
+ * and DMA Controller
+ */
+extern unsigned int pasemi_read_iob_reg(unsigned int reg);
+extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg);
+extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_dma_reg(unsigned int reg);
+extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val);
+
+/* Channel management routines */
+
+extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type,
+				   int total_size, int offset);
+extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan);
+
+extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan,
+				  const u32 cmdsta);
+extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan);
+
+/* Common routines to allocate rings and buffers */
+
+extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size);
+extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan);
+
+extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
+				  dma_addr_t *handle);
+extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
+				dma_addr_t *handle);
+
+/* Routines to allocate flags (events) for channel syncronization */
+extern int  pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int  pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
+/* Initialize the library, must be called before any other functions */
+extern int pasemi_dma_init(void);
+
+#endif /* ASM_PASEMI_DMA_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
new file mode 100644
index 000000000000..ae2ea803a0f2
--- /dev/null
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -0,0 +1,302 @@
+#ifndef _ASM_POWERPC_PCI_BRIDGE_H
+#define _ASM_POWERPC_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+extern unsigned int ppc_pci_flags;
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PPC_PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PPC_PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PPC_PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PPC_PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PPC_PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PPC_PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+#ifdef CONFIG_PPC64
+	int node;
+#endif
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+#ifndef CONFIG_PPC64
+	int self_busno;
+#endif
+
+	void __iomem *io_base_virt;
+#ifdef CONFIG_PPC64
+	void *io_base_alloc;
+#endif
+	resource_size_t io_base_phys;
+#ifndef CONFIG_PPC64
+	resource_size_t pci_io_size;
+#endif
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+#ifdef CONFIG_PPC64
+	unsigned long pci_io_size;
+#endif
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+#ifndef CONFIG_PPC64
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
+	 *   the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define PPC_INDIRECT_TYPE_EXT_REG		0x00000002
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define PPC_INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+#endif	/* !CONFIG_PPC64 */
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int global_number;		/* PCI domain number */
+#ifdef CONFIG_PPC64
+	unsigned long buid;
+	unsigned long dma_window_base_cur;
+	unsigned long dma_window_size;
+
+	void *private_data;
+#endif	/* CONFIG_PPC64 */
+};
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller* hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+extern void setup_grackle(struct pci_controller *hose);
+#else	/* CONFIG_PPC64 */
+
+/*
+ * PCI stuff, for nodes representing PCI devices, pointed to
+ * by device_node->data.
+ */
+struct iommu_table;
+
+struct pci_dn {
+	int	busno;			/* pci bus number */
+	int	devfn;			/* pci device and function number */
+
+	struct  pci_controller *phb;	/* for pci devices */
+	struct	iommu_table *iommu_table;	/* for phb's or bridges */
+	struct	device_node *node;	/* back-pointer to the device_node */
+
+	int	pci_ext_config_space;	/* for pci devices */
+
+#ifdef CONFIG_EEH
+	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
+	int	class_code;		/* pci device class */
+	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
+	int	eeh_config_addr;
+	int	eeh_pe_config_addr; /* new-style partition endpoint address */
+	int	eeh_check_count;	/* # times driver ignored error */
+	int	eeh_freeze_count;	/* # times this device froze up. */
+	int	eeh_false_positives;	/* # times this device reported #ff's */
+	u32	config_space[16];	/* saved PCI config space */
+#endif
+};
+
+/* Get the pointer to a device_node's pci_dn */
+#define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
+
+extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+
+/* Get a device_node from a pci_dev.  This code must be fast except
+ * in the case where the sysdata is incorrect and needs to be fixed
+ * up (this will only happen once).
+ * In this case the sysdata will have been inherited from a PCI host
+ * bridge or a PCI-PCI bridge further up the tree, so it will point
+ * to a valid struct pci_dn, just not the one we want.
+ */
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
+{
+	struct device_node *dn = dev->sysdata;
+	struct pci_dn *pdn = dn->data;
+
+	if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
+		return dn;	/* fast path.  sysdata is good */
+	return fetch_dev_dn(dev);
+}
+
+static inline int pci_device_from_OF_node(struct device_node *np,
+					  u8 *bus, u8 *devfn)
+{
+	if (!PCI_DN(np))
+		return -ENODEV;
+	*bus = PCI_DN(np)->busno;
+	*devfn = PCI_DN(np)->devfn;
+	return 0;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	else
+		return bus->sysdata; /* Must be root bus (PHB) */
+}
+
+/** Find the bus corresponding to the indicated device node */
+extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
+
+/** Remove all of the PCI devices under this bus */
+extern void pcibios_remove_pci_devices(struct pci_bus *bus);
+
+/** Discover new pci devices under this bus, and add them */
+extern void pcibios_add_pci_devices(struct pci_bus *bus);
+extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
+
+extern int pcibios_remove_root_bus(struct pci_controller *phb);
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	struct device_node *busdn = bus->sysdata;
+
+	BUG_ON(busdn == NULL);
+	return PCI_DN(busdn)->phb;
+}
+
+
+extern void isa_bridge_find_early(struct pci_controller *hose);
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* Check if address hits the reserved legacy IO range */
+	unsigned long ea = (unsigned long)address;
+	return ea >= ISA_IO_BASE && ea < ISA_IO_END;
+}
+
+extern int pcibios_unmap_io_space(struct pci_bus *bus);
+extern int pcibios_map_io_space(struct pci_bus *bus);
+
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
+
+#ifdef CONFIG_NUMA
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
+#else
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = -1)
+#endif
+
+#endif	/* CONFIG_PPC64 */
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
new file mode 100644
index 000000000000..a05a942b1c25
--- /dev/null
+++ b/arch/powerpc/include/asm/pci.h
@@ -0,0 +1,228 @@
+#ifndef __ASM_POWERPC_PCI_H
+#define __ASM_POWERPC_PCI_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machdep.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#include <asm-generic/pci-dma-compat.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses()    	(ppc_pci_flags & \
+					 PPC_PCI_REASSIGN_ALL_BUS)
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	if (ppc_md.pci_get_legacy_ide_irq)
+		return ppc_md.pci_get_legacy_ide_irq(dev, channel);
+	return channel ? 15 : 14;
+}
+
+#ifdef CONFIG_PPC64
+
+/*
+ * We want to avoid touching the cacheline size or MWI bit.
+ * pSeries firmware sets the cacheline size (which is not the cpu cacheline
+ * size in all cases) and hardware treats MWI the same as memory write.
+ */
+#define PCI_DISABLE_MWI
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
+extern struct dma_mapping_ops *get_pci_dma_ops(void);
+
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#else /* 32-bit */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+#endif /* CONFIG_PPC64 */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+/* The PCI address space does not equal the physical memory address
+ * space (we have an IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#else /* 32-bit */
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+#endif /* CONFIG_PPC64 */
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_setup_new_device(struct pci_dev *dev);
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_do_bus_setup(struct pci_bus *bus);
+extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h
new file mode 100644
index 000000000000..f879252b7ea6
--- /dev/null
+++ b/arch/powerpc/include/asm/percpu.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_POWERPC_PERCPU_H_
+#define _ASM_POWERPC_PERCPU_H_
+#ifdef __powerpc64__
+#include <linux/compiler.h>
+
+/*
+ * Same as asm-generic/percpu.h, except that we store the per cpu offset
+ * in the paca. Based on the x86-64 implementation.
+ */
+
+#ifdef CONFIG_SMP
+
+#include <asm/paca.h>
+
+#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
+#define __my_cpu_offset local_paca->data_offset
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#endif /* CONFIG_SMP */
+#endif /* __powerpc64__ */
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_POWERPC_PERCPU_H_ */
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
new file mode 100644
index 000000000000..58c07147b3ea
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_POWERPC_PGALLOC_32_H
+#define _ASM_POWERPC_PGALLOC_32_H
+
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+/* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
+#define pmd_free(mm, x) 		do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+/* #define pgd_populate(mm, pmd, pte)      BUG() */
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#else
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
+extern void pte_free(struct mm_struct *mm, pgtable_t pte);
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
new file mode 100644
index 000000000000..812a1d8f35cb
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_PGALLOC_64_H
+#define _ASM_POWERPC_PGALLOC_64_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+
+#ifndef CONFIG_PPC_SUBPAGE_PROT
+static inline void subpage_prot_free(pgd_t *pgd) {}
+#endif
+
+extern struct kmem_cache *pgtable_cache[];
+
+#define PGD_CACHE_NUM		0
+#define PUD_CACHE_NUM		1
+#define PMD_CACHE_NUM		1
+#define HUGEPTE_CACHE_NUM	2
+#define PTE_NONCACHE_NUM	7  /* from GFP rather than kmem_cache */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	subpage_prot_free(pgd);
+	kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+}
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_set(pud, (unsigned long)pmd);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+
+#else /* CONFIG_PPC_64K_PAGES */
+
+#define pud_populate(mm, pud, pmd)	pud_set(pud, (unsigned long)pmd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	pmd_set(pmd, (unsigned long)pte);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+        return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	pte_t *pte;
+
+	pte = pte_alloc_one_kernel(mm, address);
+	if (!pte)
+		return NULL;
+	page = virt_to_page(pte);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	__free_page(ptepage);
+}
+
+#define PGF_CACHENUM_MASK	0x7
+
+typedef struct pgtable_free {
+	unsigned long val;
+} pgtable_free_t;
+
+static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
+						unsigned long mask)
+{
+	BUG_ON(cachenum > PGF_CACHENUM_MASK);
+
+	return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
+}
+
+static inline void pgtable_free(pgtable_free_t pgf)
+{
+	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
+	int cachenum = pgf.val & PGF_CACHENUM_MASK;
+
+	if (cachenum == PTE_NONCACHE_NUM)
+		free_page((unsigned long)p);
+	else
+		kmem_cache_free(pgtable_cache[cachenum], p);
+}
+
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+
+#define __pte_free_tlb(tlb,ptepage)	\
+do { \
+	pgtable_page_dtor(ptepage); \
+	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
+		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+} while (0)
+#define __pmd_free_tlb(tlb, pmd) 	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
+		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#ifndef CONFIG_PPC_64K_PAGES
+#define __pud_free_tlb(tlb, pud)	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
+		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_64_H */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b4505ed0f0f2
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_PGALLOC_H
+#define _ASM_POWERPC_PGALLOC_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+#include <asm/pgalloc-64.h>
+#else
+#include <asm/pgalloc-32.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
new file mode 100644
index 000000000000..6b18ba9d2d85
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-4k.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_PGTABLE_4K_H
+#define _ASM_POWERPC_PGTABLE_4K_H
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  7
+#define PGD_INDEX_SIZE  9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* PTE bits */
+#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
+#define _PAGE_F_SECOND  _PAGE_SECONDARY
+#define _PAGE_F_GIX     _PAGE_GROUP_IX
+#define _PAGE_SPECIAL	0x10000 /* software: special page */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
+
+/* There is no 4K PFN hack on 4K pages */
+#define _PAGE_4K_PFN	0
+
+/* PAGE_MASK gives the right answer below, but only by accident */
+/* It should be preserving the high 48 bits and then specifically */
+/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+                         _PAGE_HPTEFLAGS)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT	(17)
+
+#ifdef STRICT_MM_TYPECHECKS
+#define __real_pte(e,p)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#else
+#define __real_pte(e,p)		(e)
+#define __rpte_to_pte(r)	(__pte(r))
+#endif
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+#ifdef CONFIG_PPC_HAS_HASH_64K
+#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
+#else
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+#endif
+
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
+#define pgd_present(pgd)	(pgd_val(pgd) != 0)
+#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
+#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define pgd_page(pgd)		virt_to_page(pgd_page_vaddr(pgd))
+
+#define pud_offset(pgdp, addr)	\
+  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#define remap_4k_pfn(vma, addr, pfn, prot)	\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
new file mode 100644
index 000000000000..07b0d8f09cb6
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-64k.h
@@ -0,0 +1,155 @@
+#ifndef _ASM_POWERPC_PGTABLE_64K_H
+#define _ASM_POWERPC_PGTABLE_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+
+#define PTE_INDEX_SIZE  12
+#define PMD_INDEX_SIZE  12
+#define PUD_INDEX_SIZE	0
+#define PGD_INDEX_SIZE  4
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these.  Basically we have a 3-level tree, with the top level being
+ * the protptrs array.  To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k).  For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+	unsigned long maxaddr;	/* only addresses < this are protected */
+	unsigned int **protptrs[2];
+	unsigned int *low_prot[4];
+};
+
+#undef PGD_TABLE_SIZE
+#define PGD_TABLE_SIZE		((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
+				 sizeof(struct subpage_prot_table))
+
+#define SBP_L1_BITS		(PAGE_SHIFT - 2)
+#define SBP_L2_BITS		(PAGE_SHIFT - 3)
+#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
+#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(pgd_t *pgd);
+
+static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
+{
+	return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
+}
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+#endif	/* __ASSEMBLY__ */
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define __HAVE_ARCH_PTE_SPECIAL
+#define _PAGE_SPECIAL	0x00000400 /* software: special page */
+#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
+#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
+#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
+
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
+
+/* Note the full page bits must be in the same location as for normal
+ * 4k pages as the same asssembly will be used to insert 64K pages
+ * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ */
+#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
+#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT	(30)
+#define PTE_RPN_MAX	(1UL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
+
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+                         _PAGE_ACCESSED)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0x1ff
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0x1ff
+
+/* Manipulate "rpte" values */
+#define __real_pte(e,p) 	((real_pte_t) { \
+	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+#define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
+        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __rpte_to_pte(r)	((r).pte)
+#define __rpte_sub_valid(rpte, index) \
+	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+
+
+/* Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)	    \
+        do {                                                                \
+                unsigned long __end = va + PAGE_SIZE;                       \
+                unsigned __split = (psize == MMU_PAGE_4K ||                 \
+				    psize == MMU_PAGE_64K_AP);              \
+                shift = mmu_psize_defs[psize].shift;                        \
+		for (index = 0; va < __end; index++, va += (1L << shift)) { \
+		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte)	\
+	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot)				\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,		\
+			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
+
+#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
new file mode 100644
index 000000000000..6fe39e327047
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -0,0 +1,802 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
+#define _ASM_POWERPC_PGTABLE_PPC32_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access.  The TLB does not have accessed nor write
+ * protect.  We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect.  We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators.  Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded.  We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added.  We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC.  The 8M pages are only used for kernel
+ * mapping of well known areas.  The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+		(unsigned long long)pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here.  The 40x hardware TLBLO
+   field looks like this:
+
+   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+
+   Where possible we make the Linux PTE bits match up with this
+
+   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+     support down to 1k pages), this is done in the TLBMiss exception
+     handler.
+   - We use only zones 0 (for kernel pages) and 1 (for user pages)
+     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+     zone.
+   - PRESENT *must* be in the bottom two bits because swap cache
+     entries use the top 30 bits.  Because 40x doesn't support SMP
+     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+     is cleared in the TLB miss handler before the TLB entry is loaded.
+   - All other bits of the PTE are loaded into TLBLO without
+     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+     software PTE bits.  We actually use use bits 21, 24, 25, and
+     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+     PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+
+#define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
+#define _PMD_BAD	0x802
+#define _PMD_SIZE	0x0e0	/* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M	0x0c0
+#define _PMD_SIZE_16M	0x0e0
+#define PMD_PAGE_SIZE(pmdval)	(1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing.  I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN.  This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ *   TLB1:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   RPN.................................  -  -  -  -  -  - ERPN.......
+ *
+ *   TLB2:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
+ *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ *   TLB2:
+ *   0...10    11   12   13   14   15   16...31
+ *   no change WL1  IL1I IL1D IL2I IL2D no change
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ *   - PRESENT *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - FILE *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
+ *     doesn't support SMP. So we can use this as software bit, like
+ *     DIRTY.
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h).  The _PAGE_XXX definitions in this file map to the
+ * above bits.  Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ *	_PAGE_PRESENT
+ *	_PAGE_FILE
+ *	_PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
+#define _PAGE_RW	0x00000002		/* S: Write permission */
+#define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
+#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
+#define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
+#define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
+#define _PAGE_USER	0x00000040		/* S: User page */
+#define _PAGE_ENDIAN	0x00000080		/* H: E bit */
+#define _PAGE_GUARDED	0x00000100		/* H: G bit */
+#define _PAGE_COHERENT	0x00000200		/* H: M bit */
+#define _PAGE_NO_CACHE	0x00000400		/* H: I bit */
+#define _PAGE_WRITETHRU	0x00000800		/* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+
+
+#elif defined(CONFIG_FSL_BOOKE)
+/*
+   MMU Assist Register 3:
+
+   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+   - PRESENT *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+
+   - FILE *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
+#define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
+#define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
+#define _PAGE_RW	0x00004	/* S: Write permission (SW) */
+#define _PAGE_DIRTY	0x00008	/* S: Page dirty */
+#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
+
+#define _PAGE_ENDIAN	0x00040	/* H: E bit */
+#define _PAGE_GUARDED	0x00080	/* H: G bit */
+#define _PAGE_COHERENT	0x00100	/* H: M bit */
+#define _PAGE_NO_CACHE	0x00200	/* H: I bit */
+#define _PAGE_WRITETHRU	0x00400	/* H: W bit */
+
+#ifdef CONFIG_PTE_64BIT
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffffffff0000ULL
+#endif
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT	0x0001	/* Page is valid */
+#define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
+#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
+#define _PAGE_GUARDED	0x0010	/* software: guarded access */
+#define _PAGE_DIRTY	0x0020	/* software: page changed */
+#define _PAGE_RW	0x0040	/* software: user write access allowed */
+#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change.  It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT	0x0001
+#define _PMD_BAD	0x0ff0
+#define _PMD_PAGE_MASK	0x000c
+#define _PMD_PAGE_8M	0x000c
+
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
+#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE	0x004	/* when !present: nonlinear file mapping */
+#define _PAGE_USER	0x004	/* usermode access allowed */
+#define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
+#define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
+#define _PAGE_DIRTY	0x080	/* C: page changed */
+#define _PAGE_ACCESSED	0x100	/* R: page referenced */
+#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
+#define _PAGE_RW	0x400	/* software: user write access allowed */
+
+#define _PTE_NONE_MASK	_PAGE_HASHPTE
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES	1
+
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+#ifndef _PAGE_ENDIAN
+#define _PAGE_ENDIAN	0
+#endif
+#ifndef _PAGE_COHERENT
+#define _PAGE_COHERENT	0
+#endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU	0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK	_PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE	0
+#define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+				 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+				 _PAGE_USER | _PAGE_ACCESSED | \
+				 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+				 _PAGE_EXEC | _PAGE_HWEXEC)
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL	(_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT	_PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT	(_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL		__pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE	__pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis.  So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+/* in some case we want to additionaly adjust where the pfn is in the pte to
+ * allow room for more flags */
+#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT + 8)
+#else
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+#endif
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot)	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+					pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.  In the 64-bit PTE case we lock around the
+ * low PTE word since we expect ALL flag bits to be there
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p,
+				       unsigned long clr,
+				       unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long old = pte_val(*p);
+	*p = __pte((old & ~clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#else /* CONFIG_PTE_64BIT */
+/* TODO: Change that to only modify the low word and move set_pte_at()
+ * out of line
+ */
+static inline unsigned long long pte_update(pte_t *p,
+					    unsigned long clr,
+					    unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%L0,0,%4\n\
+	lwzx	%0,0,%3\n\
+	andc	%1,%L0,%5\n\
+	or	%1,%1,%6\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%4\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long long old = pte_val(*p);
+	*p = __pte((old & ~(unsigned long long)clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#endif /* CONFIG_PTE_64BIT */
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+	*ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+#endif
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+	pte_update(ptep, 0, bits);
+}
+
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);         \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+		      pmd_t **pmdp);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
new file mode 100644
index 000000000000..db0b8f3b8807
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -0,0 +1,468 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
+#define _ASM_POWERPC_PGTABLE_PPC64_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pgtable-64k.h>
+#else
+#include <asm/pgtable-4k.h>
+#endif
+
+#define FIRST_USER_ADDRESS	0
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+#if TASK_SIZE_USER64 > PGTABLE_RANGE
+#error TASK_SIZE_USER64 exceeds pagetable range
+#endif
+
+#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#error TASK_SIZE_USER64 exceeds user VSID range
+#endif
+
+
+/*
+ * Define the address range of the vmalloc VM area.
+ */
+#define VMALLOC_START ASM_CONST(0xD000000000000000)
+#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
+#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Define the address ranges for MMIO and IO space :
+ *
+ *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
+ * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
+ */
+#define FULL_IO_SIZE	0x80000000ul
+#define  ISA_IO_BASE	(VMALLOC_END)
+#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
+#define  PHB_IO_BASE	(ISA_IO_END)
+#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
+#define IOREMAP_BASE	(PHB_IO_END)
+#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT		60UL
+#define REGION_MASK		(0xfUL << REGION_SHIFT)
+#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)
+#define USER_REGION_ID		(0UL)
+
+/*
+ * Defines the address of the vmemap area, in its own region
+ */
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+
+/*
+ * Common bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible. Additional
+ * bits may be defined in pgtable-*.h
+ */
+#define _PAGE_PRESENT	0x0001 /* software: pte contains a translation */
+#define _PAGE_USER	0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE	0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC	0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED	0x0008
+#define _PAGE_COHERENT	0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY	0x0080 /* C: page changed */
+#define _PAGE_ACCESSED	0x0100 /* R: page referenced */
+#define _PAGE_RW	0x0200 /* software: user write access allowed */
+#define _PAGE_BUSY	0x0800 /* software: PTE & hash are busy */
+
+/* Strong Access Ordering */
+#define _PAGE_SAO	(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
+
+/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_WRENABLE)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+			       _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
+
+#define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
+#define HAVE_PAGE_AGP
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
+				 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+				 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ 				 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY	0x8
+#define _PTEIDX_GROUP_IX	0x7
+
+
+/*
+ * POWER4 and newer have per page execute protection, older chips can only
+ * do this on a segment (256MB) basis.
+ *
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * mk_pte takes a (struct page *) as input
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	pte_t pte;
+
+
+	pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
+	return pte;
+}
+
+#define pte_modify(_pte, newprot) \
+  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+
+#define pte_none(pte)		((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/* pte_clear moved to later in this file */
+
+#define pte_pfn(x)		((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+
+#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
+				 || (pmd_val(pmd) & PMD_BAD_BITS))
+#define	pmd_present(pmd)	(pmd_val(pmd) != 0)
+#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+
+#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
+#define pud_none(pud)		(!pud_val(pud))
+#define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
+				 || (pud_val(pud) & PUD_BAD_BITS))
+#define pud_present(pud)	(pud_val(pud) != 0)
+#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
+#define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
+#define pud_page(pud)		virt_to_page(pud_page_vaddr(pud))
+
+#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
+
+/*
+ * Find an entry in a page-table-directory.  We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+#define pmd_offset(pudp,addr) \
+  (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+#define pte_offset_kernel(dir,addr) \
+  (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+#define pte_unmap_nested(pte)		do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+	return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+				       unsigned long addr,
+				       pte_t *ptep, unsigned long clr,
+				       int huge)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+	: "cc" );
+
+	if (old & _PAGE_HASHPTE)
+		hpte_need_flush(mm, addr, ptep, old, huge);
+	return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+       		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t * ptep)
+{
+	pte_update(mm, addr, ptep, ~0UL, 0);
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (pte_present(*ptep))
+		pte_clear(mm, addr, ptep);
+	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+	*ptep = pte;
+}
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);    	   \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> 1) & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
+#define __pte_to_swp_entry(pte)	((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << PTE_RPN_SHIFT })
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PTE_RPN_SHIFT)
+#define pgoff_to_pte(off)	((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_RPN_SHIFT)
+
+void pgtable_cache_init(void);
+
+/*
+ * find_linux_pte returns the address of a linux pte for a given
+ * effective address and directory.  If not found, it returns zero.
+ */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
+{
+	pgd_t *pg;
+	pud_t *pu;
+	pmd_t *pm;
+	pte_t *pt = NULL;
+
+	pg = pgdir + pgd_index(ea);
+	if (!pgd_none(*pg)) {
+		pu = pud_offset(pg, ea);
+		if (!pud_none(*pu)) {
+			pm = pmd_offset(pu, ea);
+			if (pmd_present(*pm))
+				pt = pte_offset_kernel(pm, ea);
+		}
+	}
+	return pt;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
new file mode 100644
index 000000000000..dbb8ca172e44
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_POWERPC_PGTABLE_H
+#define _ASM_POWERPC_PGTABLE_H
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+struct mm_struct;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_PPC64)
+#  include <asm/pgtable-ppc64.h>
+#else
+#  include <asm/pgtable-ppc32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+
+extern void paging_init(void);
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address.  Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test.  What should we do here?
+ */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#include <asm-generic/pgtable.h>
+
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h
new file mode 100644
index 000000000000..fa74c6c3e106
--- /dev/null
+++ b/arch/powerpc/include/asm/phyp_dump.h
@@ -0,0 +1,47 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END   (1UL<<28)
+
+struct phyp_dump {
+	/* Memory that is reserved during very early boot. */
+	unsigned long init_reserve_start;
+	unsigned long init_reserve_size;
+	/* cmd line options during boot */
+	unsigned long reserve_bootvar;
+	unsigned long phyp_dump_at_boot;
+	/* Check status during boot if dump supported, active & present*/
+	unsigned long phyp_dump_configured;
+	unsigned long phyp_dump_is_active;
+	/* store cpu & hpte size */
+	unsigned long cpu_state_size;
+	unsigned long hpte_region_size;
+	/* previous scratch area values */
+	unsigned long reserved_scratch_addr;
+	unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
new file mode 100644
index 000000000000..877c35a4356e
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -0,0 +1,405 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ *                    Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ *       not worth it, the media-bay driver can directly use the mac-io
+ *       ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_PMAC_FEATURE_H
+#define __ASM_POWERPC_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+#include <asm/machdep.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
+#define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
+#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
+#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
+#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
+#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3		0x49	/* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4		0x50	/* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC			0x50	/* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99	0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC		0x80	/* XServe */
+#define PMAC_TYPE_WINDTUNNEL		0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC	0x102	/* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID	0x11f	/* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5		0x150	/* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L	0x151	/* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5		0x152	/* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5		0x153	/* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2		0x19f	/* Any other K2 based */
+#define PMAC_TYPE_UNKNOWN_SHASTA       	0x19e	/* Any other Shasta based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP		0x00000001
+#define PMAC_MB_HAS_FW_POWER		0x00000002
+#define PMAC_MB_OLD_CORE99		0x00000004
+#define PMAC_MB_MOBILE			0x00000008
+#define PMAC_MB_MAY_SLEEP		0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+					long param, long value)
+{
+	if (!ppc_md.feature_call || !machine_is(powermac))
+		return -ENODEV;
+	return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
+	#define PMAC_SCC_ASYNC		0
+	#define PMAC_SCC_IRDA		1
+	#define PMAC_SCC_I2S1		2
+	#define PMAC_SCC_FLAG_XMON	0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0  - model id
+ *           1  - model flags (capabilities)
+ *           2  - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
+#define   PMAC_MB_INFO_MODEL	0
+#define   PMAC_MB_INFO_FLAGS	1
+#define   PMAC_MB_INFO_NAME	2
+
+/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC		PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE	(NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE     	PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE	PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
+
+/* The AGP driver registers itself here */
+extern void pmac_register_agp_pm(struct pci_dev *bridge,
+				 int (*suspend)(struct pci_dev *bridge),
+				 int (*resume)(struct pci_dev *bridge));
+
+/* Those are meant to be used by video drivers to deal with AGP
+ * suspend resume properly
+ */
+extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
+extern void pmac_resume_agp_for_card(struct pci_dev *dev);
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS		2
+
+enum {
+	macio_unknown = 0,
+	macio_grand_central,
+	macio_ohare,
+	macio_ohareII,
+	macio_heathrow,
+	macio_gatwick,
+	macio_paddington,
+	macio_keylargo,
+	macio_pangea,
+	macio_intrepid,
+	macio_keylargo2,
+	macio_shasta,
+};
+
+struct macio_chip
+{
+	struct device_node	*of_node;
+	int			type;
+	const char		*name;
+	int			rev;
+	volatile u32		__iomem *base;
+	unsigned long		flags;
+
+	/* For use by macio_asic PCI driver */
+	struct macio_bus	lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON	0x00000001
+#define MACIO_FLAG_SCCB_ON	0x00000002
+#define MACIO_FLAG_SCC_LOCKED	0x00000004
+#define MACIO_FLAG_AIRPORT_ON	0x00000010
+#define MACIO_FLAG_FW_SUPPORTED	0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r)	((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r)	(((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r)		(in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v)	(out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r)		(in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v)		(out_8(MACIO_FCR8(macio,r), (v)))
+
+/*
+ * Those are exported by pmac feature for internal use by arch code
+ * only like the platform function callbacks, do not use directly in drivers
+ */
+extern spinlock_t feature_lock;
+extern struct device_node *uninorth_node;
+extern u32 __iomem *uninorth_base;
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r)	(uninorth_base + ((r) >> 2))
+#define UN_IN(r)	(in_be32(UN_REG(r)))
+#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
+
+/* Uninorth variant:
+ *
+ * 0 = not uninorth
+ * 1 = U1.x or U2.x
+ * 3 = U3
+ * 4 = U4
+ */
+extern int pmac_get_uninorth_variant(void);
+
+#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
new file mode 100644
index 000000000000..131011bd7e76
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
@@ -0,0 +1,107 @@
+/* 
+ *  include/asm-ppc/pmac_low_i2c.h
+ *
+ *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+#ifdef __KERNEL__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+	pmac_i2c_mode_dumb	= 1,
+	pmac_i2c_mode_std	= 2,
+	pmac_i2c_mode_stdsub	= 3,
+	pmac_i2c_mode_combined	= 4,
+};
+
+/* RW bit in address */
+enum {
+	pmac_i2c_read		= 0x01,
+	pmac_i2c_write		= 0x00
+};
+
+/* i2c bus type */
+enum {
+	pmac_i2c_bus_keywest	= 0,
+	pmac_i2c_bus_pmu	= 1,
+	pmac_i2c_bus_smu	= 2,
+};
+
+/* i2c bus features */
+enum {
+	/* can_largesub : supports >1 byte subaddresses (SMU only) */
+	pmac_i2c_can_largesub	= 0x00000001u,
+
+	/* multibus : device node holds multiple busses, bus number is
+	 * encoded in bits 0xff00 of "reg" of a given device
+	 */
+	pmac_i2c_multibus	= 0x00000002u,
+};
+
+/* i2c busses in the system */
+struct pmac_i2c_bus;
+struct i2c_adapter;
+
+/* Init, called early during boot */
+extern int pmac_i2c_init(void);
+
+/* Lookup an i2c bus for a device-node. The node can be either the bus
+ * node itself or a device below it. In the case of a multibus, the bus
+ * node itself is the controller node, else, it's a child of the controller
+ * node
+ */
+extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
+
+/* Get the address for an i2c device. This strips the bus number if
+ * necessary. The 7 bits address is returned 1 bit right shifted so that the
+ * direction can be directly ored in
+ */
+extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
+
+/* Get infos about a bus */
+extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
+extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
+
+/* i2c layer adapter attach/detach */
+extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
+extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
+
+/* March a device or bus with an i2c adapter structure, to be used by drivers
+ * to match device-tree nodes with i2c adapters during adapter discovery
+ * callbacks
+ */
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+				  struct i2c_adapter *adapter);
+
+
+/* (legacy) Locking functions exposed to i2c-keywest */
+extern int pmac_low_i2c_lock(struct device_node *np);
+extern int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
+extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
+extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+			 u32 subaddr, u8 *data,  int len);
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_i2c_suspend(void);
+extern void pmac_pfunc_i2c_resume(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h
new file mode 100644
index 000000000000..1330d6a58c57
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_pfunc.h
@@ -0,0 +1,252 @@
+#ifndef __PMAC_PFUNC_H__
+#define __PMAC_PFUNC_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+/* Flags in command lists */
+#define PMF_FLAGS_ON_INIT		0x80000000u
+#define PMF_FLGAS_ON_TERM		0x40000000u
+#define PMF_FLAGS_ON_SLEEP		0x20000000u
+#define PMF_FLAGS_ON_WAKE		0x10000000u
+#define PMF_FLAGS_ON_DEMAND		0x08000000u
+#define PMF_FLAGS_INT_GEN		0x04000000u
+#define PMF_FLAGS_HIGH_SPEED		0x02000000u
+#define PMF_FLAGS_LOW_SPEED		0x01000000u
+#define PMF_FLAGS_SIDE_EFFECTS		0x00800000u
+
+/*
+ * Arguments to a platform function call.
+ *
+ * NOTE: By convention, pointer arguments point to an u32
+ */
+struct pmf_args {
+	union {
+		u32 v;
+		u32 *p;
+	} u[4];
+	unsigned int count;
+};
+
+/*
+ * A driver capable of interpreting commands provides a handlers
+ * structure filled with whatever handlers are implemented by this
+ * driver. Non implemented handlers are left NULL.
+ *
+ * PMF_STD_ARGS are the same arguments that are passed to the parser
+ * and that gets passed back to the various handlers.
+ *
+ * Interpreting a given function always start with a begin() call which
+ * returns an instance data to be passed around subsequent calls, and
+ * ends with an end() call. This allows the low level driver to implement
+ * locking policy or per-function instance data.
+ *
+ * For interrupt capable functions, irq_enable() is called when a client
+ * registers, and irq_disable() is called when the last client unregisters
+ * Note that irq_enable & irq_disable are called within a semaphore held
+ * by the core, thus you should not try to register yourself to some other
+ * pmf interrupt during those calls.
+ */
+
+#define PMF_STD_ARGS	struct pmf_function *func, void *instdata, \
+		        struct pmf_args *args
+
+struct pmf_function;
+
+struct pmf_handlers {
+	void * (*begin)(struct pmf_function *func, struct pmf_args *args);
+	void (*end)(struct pmf_function *func, void *instdata);
+
+	int (*irq_enable)(struct pmf_function *func);
+	int (*irq_disable)(struct pmf_function *func);
+
+	int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
+	int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
+
+	int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*read_reg32)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*read_reg16)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+	int (*read_reg8)(PMF_STD_ARGS, u32 offset);
+
+	int (*delay)(PMF_STD_ARGS, u32 duration);
+
+	int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+
+	int (*read_i2c)(PMF_STD_ARGS, u32 len);
+	int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
+	int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
+		       const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
+	int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
+	int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
+		       u32 totallen, const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
+	int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
+	int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
+	int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
+			   u32 totallen, const u8 *maskdata,
+			   const u8 *valuedata);
+
+	int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			      u32 xor);
+
+	int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+
+	int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
+				const u8 *valuedata);
+
+	struct module *owner;
+};
+
+
+/*
+ * Drivers who expose platform functions register at init time, this
+ * causes the platform functions for that device node to be parsed in
+ * advance and associated with the device. The data structures are
+ * partially public so a driver can walk the list of platform functions
+ * and eventually inspect the flags
+ */
+struct pmf_device;
+
+struct pmf_function {
+	/* All functions for a given driver are linked */
+	struct list_head	link;
+
+	/* Function node & driver data */
+	struct device_node	*node;
+	void			*driver_data;
+
+	/* For internal use by core */
+	struct pmf_device	*dev;
+
+	/* The name is the "xxx" in "platform-do-xxx", this is how
+	 * platform functions are identified by this code. Some functions
+	 * only operate for a given target, in which case the phandle is
+	 * here (or 0 if the filter doesn't apply)
+	 */
+	const char		*name;
+	u32			phandle;
+
+	/* The flags for that function. You can have several functions
+	 * with the same name and different flag
+	 */
+	u32			flags;
+
+	/* The actual tokenized function blob */
+	const void		*data;
+	unsigned int		length;
+
+	/* Interrupt clients */
+	struct list_head	irq_clients;
+
+	/* Refcounting */
+	struct kref		ref;
+};
+
+/*
+ * For platform functions that are interrupts, one can register
+ * irq_client structures. You canNOT use the same structure twice
+ * as it contains a link member. Also, the callback is called with
+ * a spinlock held, you must not call back into any of the pmf_* functions
+ * from within that callback
+ */
+struct pmf_irq_client {
+	void			(*handler)(void *data);
+	void			*data;
+	struct module		*owner;
+	struct list_head	link;
+	struct pmf_function	*func;
+};
+
+
+/*
+ * Register/Unregister a function-capable driver and its handlers
+ */
+extern int pmf_register_driver(struct device_node *np,
+			      struct pmf_handlers *handlers,
+			      void *driverdata);
+
+extern void pmf_unregister_driver(struct device_node *np);
+
+
+/*
+ * Register/Unregister interrupt clients
+ */
+extern int pmf_register_irq_client(struct device_node *np,
+				   const char *name,
+				   struct pmf_irq_client *client);
+
+extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
+
+/*
+ * Called by the handlers when an irq happens
+ */
+extern void pmf_do_irq(struct pmf_function *func);
+
+
+/*
+ * Low level call to platform functions.
+ *
+ * The phandle can filter on the target object for functions that have
+ * multiple targets, the flags allow you to restrict the call to a given
+ * combination of flags.
+ *
+ * The args array contains as many arguments as is required by the function,
+ * this is dependent on the function you are calling, unfortunately Apple
+ * mechanism provides no way to encode that so you have to get it right at
+ * the call site. Some functions require no args, in which case, you can
+ * pass NULL.
+ *
+ * You can also pass NULL to the name. This will match any function that has
+ * the appropriate combination of flags & phandle or you can pass 0 to the
+ * phandle to match any
+ */
+extern int pmf_do_functions(struct device_node *np, const char *name,
+			    u32 phandle, u32 flags, struct pmf_args *args);
+
+
+
+/*
+ * High level call to a platform function.
+ *
+ * This one looks for the platform-xxx first so you should call it to the
+ * actual target if any. It will fallback to platform-do-xxx if it can't
+ * find one. It will also exclusively target functions that have
+ * the "OnDemand" flag.
+ */
+
+extern int pmf_call_function(struct device_node *target, const char *name,
+			     struct pmf_args *args);
+
+
+/*
+ * For low latency interrupt usage, you can lookup for on-demand functions
+ * using the functions below
+ */
+
+extern struct pmf_function *pmf_find_function(struct device_node *target,
+					      const char *name);
+
+extern struct pmf_function * pmf_get_function(struct pmf_function *func);
+extern void pmf_put_function(struct pmf_function *func);
+
+extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
+
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_base_suspend(void);
+extern void pmac_pfunc_base_resume(void);
+
+#endif /* __PMAC_PFUNC_H__ */
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
new file mode 100644
index 000000000000..d6a616a1b3ea
--- /dev/null
+++ b/arch/powerpc/include/asm/pmc.h
@@ -0,0 +1,37 @@
+/*
+ * pmc.h
+ * Copyright (C) 2004  David Gibson, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _POWERPC_PMC_H
+#define _POWERPC_PMC_H
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+typedef void (*perf_irq_t)(struct pt_regs *);
+extern perf_irq_t perf_irq;
+
+int reserve_pmc_hardware(perf_irq_t new_perf_irq);
+void release_pmc_hardware(void);
+
+#ifdef CONFIG_PPC64
+void power4_enable_pmcs(void);
+void pasemi_enable_pmcs(void);
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMC_H */
diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h
new file mode 100644
index 000000000000..b4e91fbf5081
--- /dev/null
+++ b/arch/powerpc/include/asm/pmi.h
@@ -0,0 +1,66 @@
+#ifndef _POWERPC_PMI_H
+#define _POWERPC_PMI_H
+
+/*
+ * Definitions for talking with PMI device on PowerPC
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+
+#define PMI_TYPE_FREQ_CHANGE	0x01
+#define PMI_TYPE_POWER_BUTTON	0x02
+#define PMI_READ_TYPE		0
+#define PMI_READ_DATA0		1
+#define PMI_READ_DATA1		2
+#define PMI_READ_DATA2		3
+#define PMI_WRITE_TYPE		4
+#define PMI_WRITE_DATA0		5
+#define PMI_WRITE_DATA1		6
+#define PMI_WRITE_DATA2		7
+
+#define PMI_ACK			0x80
+
+#define PMI_TIMEOUT		100
+
+typedef struct {
+	u8	type;
+	u8	data0;
+	u8	data1;
+	u8	data2;
+} pmi_message_t;
+
+struct pmi_handler {
+	struct list_head node;
+	u8 type;
+	void (*handle_pmi_message) (pmi_message_t);
+};
+
+int pmi_register_handler(struct pmi_handler *);
+void pmi_unregister_handler(struct pmi_handler *);
+
+int pmi_send_message(pmi_message_t);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMI_H */
diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/powerpc/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/asm/posix_types.h
new file mode 100644
index 000000000000..c4e396b540df
--- /dev/null
+++ b/arch/powerpc/include/asm/posix_types.h
@@ -0,0 +1,128 @@
+#ifndef _ASM_POWERPC_POSIX_TYPES_H
+#define _ASM_POWERPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_suseconds_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned int	__kernel_old_uid_t;
+typedef unsigned int	__kernel_old_gid_t;
+
+#ifdef __powerpc64__
+typedef unsigned long  	__kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef unsigned long	__kernel_old_dev_t;
+#else
+typedef unsigned short	__kernel_nlink_t;
+typedef short		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+#ifdef __powerpc64__
+typedef long long	__kernel_loff_t;
+#else
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = (unsigned long *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+
+		      case 8:
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+#endif /* __GNUC__ */
+#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
new file mode 100644
index 000000000000..854ab713f56c
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -0,0 +1,149 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PPC_PCI_H
+#define _ASM_POWERPC_PPC_PCI_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+extern unsigned long isa_io_base;
+
+extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
+extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
+
+
+extern struct list_head hose_list;
+
+extern void find_and_init_phbs(void);
+
+extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
+
+/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
+#define BUID_HI(buid) ((buid) >> 32)
+#define BUID_LO(buid) ((buid) & 0xffffffff)
+
+/* PCI device_node operations */
+struct device_node;
+typedef void *(*traverse_func)(struct device_node *me, void *data);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+		void *data);
+
+extern void pci_devs_phb_init(void);
+extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+extern void scan_phb(struct pci_controller *hose);
+
+/* From rtas_pci.h */
+extern void init_pci_config_tokens (void);
+extern unsigned long get_phb_buid (struct device_node *);
+extern int rtas_setup_phb(struct pci_controller *phb);
+
+extern unsigned long pci_probe_only;
+
+/* ---- EEH internal-use-only related routines ---- */
+#ifdef CONFIG_EEH
+
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+void pci_addr_cache_build(void);
+struct pci_dev *pci_get_device_by_addr(unsigned long addr);
+
+/**
+ * eeh_slot_error_detail -- record and EEH error condition to the log
+ * @pdn:      pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
+ *
+ * Obtains the EEH error details from the RTAS subsystem,
+ * and then logs these details with the RTAS error log system.
+ */
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
+
+/**
+ * rtas_pci_enable - enable IO transfers for this slot
+ * @pdn:       pci device node
+ * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
+ *
+ * Enable I/O transfers to this slot 
+ */
+#define EEH_THAW_MMIO 2
+#define EEH_THAW_DMA  3
+int rtas_pci_enable(struct pci_dn *pdn, int function);
+
+/**
+ * rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn:       pci device node
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * does this by asserting the PCI #RST line for 1/8th of
+ * a second; this routine will sleep while the adapter is
+ * being reset.
+ *
+ * Returns a non-zero value if the reset failed.
+ */
+int rtas_set_slot_reset (struct pci_dn *);
+int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
+
+/** 
+ * eeh_restore_bars - Restore device configuration info.
+ * @pdn:       pci device node
+ *
+ * A reset of a PCI device will clear out its config space.
+ * This routines will restore the config space for this
+ * device, and is children, to values previously obtained
+ * from the firmware.
+ */
+void eeh_restore_bars(struct pci_dn *);
+
+/**
+ * rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn:       pci device node
+ *
+ * Ask the firmware to configure all PCI bridges devices
+ * located behind the indicated node. Required after a
+ * pci device reset. Does essentially the same hing as
+ * eeh_restore_bars, but for brdges, and lets firmware 
+ * do the work.
+ */
+void rtas_configure_bridge(struct pci_dn *);
+
+int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
+int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
+
+/**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn:       pci device node
+ *
+ * mark and clear slots: find "partition endpoint" PE and set or 
+ * clear the flags for each subnode of the PE.
+ */
+void eeh_mark_slot (struct device_node *dn, int mode_flag);
+void eeh_clear_slot (struct device_node *dn, int mode_flag);
+
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn:       pci device node
+ */
+struct device_node * find_device_pe(struct device_node *dn);
+
+void eeh_sysfs_add_device(struct pci_dev *pdev);
+void eeh_sysfs_remove_device(struct pci_dev *pdev);
+
+#endif /* CONFIG_EEH */
+
+#else /* CONFIG_PCI */
+static inline void find_and_init_phbs(void) { }
+static inline void init_pci_config_tokens(void) { }
+#endif /* !CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
new file mode 100644
index 000000000000..033039a80c42
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
new file mode 100644
index 000000000000..0966899d974b
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -0,0 +1,689 @@
+/*
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ */
+#ifndef _ASM_POWERPC_PPC_ASM_H
+#define _ASM_POWERPC_PPC_ASM_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#error __FILE__ should only be used in assembler files
+#else
+
+#define SZL			(BITS_PER_LONG/8)
+
+/*
+ * Stuff for accurate CPU time accounting.
+ * These macros handle transitions between user and system state
+ * in exception entry and exit and accumulate time to the
+ * user_time and system_time fields in the paca.
+ */
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)
+#else
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
+	beq	2f;			/* if from kernel mode */	\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_USER_TIME(r13);					\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_USER_TIME(r13);					\
+2:
+
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_SYSTEM_TIME(r13);				\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_SYSTEM_TIME(r13);
+#endif
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#ifdef __powerpc64__
+#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
+#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
+#else
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+				SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
+				REST_10GPRS(22, base)
+#endif
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
+				 ((rb) << 11) | (((xs) >> 5)))
+
+#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
+#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
+
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
+#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
+#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
+#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
+#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
+#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
+#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
+#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
+#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
+
+#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVRS(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVRS(n,s,base)	SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
+#define SAVE_8EVRS(n,s,base)	SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
+#define SAVE_16EVRS(n,s,base)	SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
+#define SAVE_32EVRS(n,s,base)	SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
+#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVRS(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVRS(n,s,base)	REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
+#define REST_8EVRS(n,s,base)	REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
+#define REST_16EVRS(n,s,base)	REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
+#define REST_32EVRS(n,s,base)	REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
+
+/* Macros to adjust thread priority for hardware multithreading */
+#define HMT_VERY_LOW	or	31,31,31	# very low priority
+#define HMT_LOW		or	1,1,1
+#define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
+#define HMT_MEDIUM	or	2,2,2
+#define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
+#define HMT_HIGH	or	3,3,3
+
+/* handle instructions that older assemblers may not know */
+#define RFCI		.long 0x4c000066	/* rfci instruction */
+#define RFDI		.long 0x4c00004e	/* rfdi instruction */
+#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+#define _GLOBAL(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_GLOBAL(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _STATIC(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_STATIC(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#else /* 32-bit */
+
+#define _ENTRY(n)	\
+	.globl n;	\
+n:
+
+#define _GLOBAL(n)	\
+	.text;		\
+	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
+	.globl n;	\
+n:
+
+#define _KPROBE(n)	\
+	.section ".kprobes.text","a";	\
+	.globl	n;	\
+n:
+
+#endif
+
+/* 
+ * LOAD_REG_IMMEDIATE(rn, expr)
+ *   Loads the value of the constant expression 'expr' into register 'rn'
+ *   using immediate instructions only.  Use this when it's important not
+ *   to reference other data (i.e. on ppc64 when the TOC pointer is not
+ *   valid).
+ *
+ * LOAD_REG_ADDR(rn, name)
+ *   Loads the address of label 'name' into register 'rn'.  Use this when
+ *   you don't particularly need immediate instructions only, but you need
+ *   the whole address in one register (e.g. it's a structure address and
+ *   you want to access various offsets within it).  On ppc32 this is
+ *   identical to LOAD_REG_IMMEDIATE.
+ *
+ * LOAD_REG_ADDRBASE(rn, name)
+ * ADDROFF(name)
+ *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
+ *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
+ *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
+ *   in size, so is suitable for use directly as an offset in load and store
+ *   instructions.  Use this when loading/storing a single word or less as:
+ *      LOAD_REG_ADDRBASE(rX, name)
+ *      ld	rY,ADDROFF(name)(rX)
+ */
+#ifdef __powerpc64__
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis     (reg),(expr)@highest;		\
+	ori     (reg),(reg),(expr)@higher;	\
+	rldicr  (reg),(reg),32,31;		\
+	oris    (reg),(reg),(expr)@h;		\
+	ori     (reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)			\
+	ld	(reg),name@got(r2)
+
+#define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
+#define ADDROFF(name)			0
+
+/* offsets for stack frame layout */
+#define LRSAVE	16
+
+#else /* 32-bit */
+
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis	(reg),(expr)@ha;		\
+	addi	(reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
+
+#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
+#define ADDROFF(name)			name@l
+
+/* offsets for stack frame layout */
+#define LRSAVE	4
+
+#endif
+
+/* various errata or part fixups */
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifdef CONFIG_PPC_CELL
+#define MFTB(dest)			\
+90:	mftb  dest;			\
+BEGIN_FTR_SECTION_NESTED(96);		\
+	cmpwi dest,0;			\
+	beq-  90b;			\
+END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#else
+#define MFTB(dest)			mftb dest
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+	
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
+
+#if defined(CONFIG_BOOKE)
+#define toreal(rd)
+#define fromreal(rd)
+
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
+#define tophys(rd,rs)				\
+	addis	rd,rs,0
+
+#define tovirt(rd,rs)				\
+	addis	rd,rs,0
+
+#elif defined(CONFIG_PPC64)
+#define toreal(rd)		/* we can access c000... in real mode */
+#define fromreal(rd)
+
+#define tophys(rd,rs)                           \
+	clrldi	rd,rs,2
+
+#define tovirt(rd,rs)                           \
+	rotldi	rd,rs,16;			\
+	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
+	rotldi	rd,rd,48
+#else
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define toreal(rd)	tophys(rd,rd)
+#define fromreal(rd)	tovirt(rd,rd)
+
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+#endif
+
+#ifdef CONFIG_PPC64
+#define RFI		rfid
+#define MTMSRD(r)	mtmsrd	r
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define	RFI		rfi
+#else
+#define RFI		rfi; b .	/* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif
+
+#endif /* __KERNEL__ */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+/* AltiVec Registers (VPRs) */
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+/* VSX Registers (VSRs) */
+
+#define	vsr0	0
+#define	vsr1	1
+#define	vsr2	2
+#define	vsr3	3
+#define	vsr4	4
+#define	vsr5	5
+#define	vsr6	6
+#define	vsr7	7
+#define	vsr8	8
+#define	vsr9	9
+#define	vsr10	10
+#define	vsr11	11
+#define	vsr12	12
+#define	vsr13	13
+#define	vsr14	14
+#define	vsr15	15
+#define	vsr16	16
+#define	vsr17	17
+#define	vsr18	18
+#define	vsr19	19
+#define	vsr20	20
+#define	vsr21	21
+#define	vsr22	22
+#define	vsr23	23
+#define	vsr24	24
+#define	vsr25	25
+#define	vsr26	26
+#define	vsr27	27
+#define	vsr28	28
+#define	vsr29	29
+#define	vsr30	30
+#define	vsr31	31
+#define	vsr32	32
+#define	vsr33	33
+#define	vsr34	34
+#define	vsr35	35
+#define	vsr36	36
+#define	vsr37	37
+#define	vsr38	38
+#define	vsr39	39
+#define	vsr40	40
+#define	vsr41	41
+#define	vsr42	42
+#define	vsr43	43
+#define	vsr44	44
+#define	vsr45	45
+#define	vsr46	46
+#define	vsr47	47
+#define	vsr48	48
+#define	vsr49	49
+#define	vsr50	50
+#define	vsr51	51
+#define	vsr52	52
+#define	vsr53	53
+#define	vsr54	54
+#define	vsr55	55
+#define	vsr56	56
+#define	vsr57	57
+#define	vsr58	58
+#define	vsr59	59
+#define	vsr60	60
+#define	vsr61	61
+#define	vsr62	62
+#define	vsr63	63
+
+/* SPE Registers (EVPRs) */
+
+#define	evr0	0
+#define	evr1	1
+#define	evr2	2
+#define	evr3	3
+#define	evr4	4
+#define	evr5	5
+#define	evr6	6
+#define	evr7	7
+#define	evr8	8
+#define	evr9	9
+#define	evr10	10
+#define	evr11	11
+#define	evr12	12
+#define	evr13	13
+#define	evr14	14
+#define	evr15	15
+#define	evr16	16
+#define	evr17	17
+#define	evr18	18
+#define	evr19	19
+#define	evr20	20
+#define	evr21	21
+#define	evr22	22
+#define	evr23	23
+#define	evr24	24
+#define	evr25	25
+#define	evr26	26
+#define	evr27	27
+#define	evr28	28
+#define	evr29	29
+#define	evr30	30
+#define	evr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
new file mode 100644
index 000000000000..101ed87f7d84
--- /dev/null
+++ b/arch/powerpc/include/asm/processor.h
@@ -0,0 +1,314 @@
+#ifndef _ASM_POWERPC_PROCESSOR_H
+#define _ASM_POWERPC_PROCESSOR_H
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+
+#ifdef CONFIG_VSX
+#define TS_FPRWIDTH 2
+#else
+#define TS_FPRWIDTH 1
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+/* We do _not_ want to define new machine types at all, those must die
+ * in favor of using the device-tree
+ * -- BenH.
+ */
+
+/* PREP sub-platform types see residual.h for these */
+#define _PREP_Motorola	0x01	/* motorola prep */
+#define _PREP_Firm	0x02	/* firmworks prep */
+#define _PREP_IBM	0x00	/* ibm prep */
+#define _PREP_Bull	0x03	/* bull prep */
+
+/* CHRP sub-platform types. These are arbitrary */
+#define _CHRP_Motorola	0x04	/* motorola chrp, the cobra */
+#define _CHRP_IBM	0x05	/* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos	0x06	/* Genesi/bplan's Pegasos and Pegasos2 */
+#define _CHRP_briq	0x07	/* TotalImpact's briQ */
+
+#if defined(__KERNEL__) && defined(CONFIG_PPC32)
+
+extern int _chrp_type;
+
+#ifdef CONFIG_PPC_PREP
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+
+#endif /* CONFIG_PPC_PREP */
+
+#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/* Macros for adjusting thread priority (hardware multi-threading) */
+#define HMT_very_low()   asm volatile("or 31,31,31   # very low priority")
+#define HMT_low()	 asm volatile("or 1,1,1	     # low priority")
+#define HMT_medium_low() asm volatile("or 6,6,6      # medium low priority")
+#define HMT_medium()	 asm volatile("or 2,2,2	     # medium priority")
+#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
+#define HMT_high()	 asm volatile("or 3,3,3	     # high priority")
+
+#ifdef __KERNEL__
+
+extern int have_of;
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Create a new kernel thread. */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_vsx;
+extern struct task_struct *last_task_used_spe;
+
+#ifdef CONFIG_PPC32
+
+#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
+#error User TASK_SIZE overlaps with KERNEL_START address
+#endif
+#define TASK_SIZE	(CONFIG_TASK_SIZE)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+#endif
+
+#ifdef CONFIG_PPC64
+/* 64-bit user address space is 44-bits (16TB user VM) */
+#define TASK_SIZE_USER64 (0x0000100000000000UL)
+
+/* 
+ * 32-bit user address space is 4GB - 1 page 
+ * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
+ */
+#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
+
+#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+		TASK_SIZE_USER32 : TASK_SIZE_USER64)
+#define TASK_SIZE	  TASK_SIZE_OF(current)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
+
+#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \
+		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
+#endif
+
+#ifdef __KERNEL__
+#ifdef __powerpc64__
+
+#define STACK_TOP_USER64 TASK_SIZE_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+		   STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#define STACK_TOP_MAX STACK_TOP_USER64
+
+#else /* __powerpc64__ */
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+#endif /* __powerpc64__ */
+#endif /* __KERNEL__ */
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define TS_FPROFFSET 0
+#define TS_VSRLOWOFFSET 1
+#define TS_FPR(i) fpr[i][TS_FPROFFSET]
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+
+#ifdef CONFIG_PPC64
+	unsigned long	ksp_vsid;
+#endif
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+#ifdef CONFIG_PPC32
+	void		*pgdir;		/* root of page-table tree */
+#endif
+#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
+	unsigned long	dbcr0;		/* debug control register values */
+	unsigned long	dbcr1;
+#endif
+	/* FP and VSX 0-31 register set */
+	double		fpr[32][TS_FPRWIDTH];
+	struct {
+
+		unsigned int pad;
+		unsigned int val;	/* Floating point status */
+	} fpscr;
+	int		fpexc_mode;	/* floating-point exception mode */
+	unsigned int	align_ctl;	/* alignment handling control */
+#ifdef CONFIG_PPC64
+	unsigned long	start_tb;	/* Start purr when proc switched in */
+	unsigned long	accum_tb;	/* Total accumilated purr for process */
+#endif
+	unsigned long	dabr;		/* Data address breakpoint register */
+#ifdef CONFIG_ALTIVEC
+	/* Complete AltiVec register set */
+	vector128	vr[32] __attribute__((aligned(16)));
+	/* AltiVec status */
+	vector128	vscr __attribute__((aligned(16)));
+	unsigned long	vrsave;
+	int		used_vr;	/* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* VSR status */
+	int		used_vsr;	/* set if process has used altivec */
+#endif /* CONFIG_VSX */
+#ifdef CONFIG_SPE
+	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
+	u64		acc;		/* Accumulator */
+	unsigned long	spefscr;	/* SPE & eFP status */
+	int		used_spe;	/* set if process has used spe */
+#endif /* CONFIG_SPE */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
+#define INIT_SP_LIMIT \
+	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
+
+
+#ifdef CONFIG_PPC32
+#define INIT_THREAD { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.fs = KERNEL_DS, \
+	.pgdir = swapper_pg_dir, \
+	.fpexc_mode = MSR_FE0 | MSR_FE1, \
+}
+#else
+#define INIT_THREAD  { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
+	.fs = KERNEL_DS, \
+	.fpr = {{0}}, \
+	.fpscr = { .val = 0, }, \
+	.fpexc_mode = 0, \
+}
+#endif
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk)    \
+        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.regs)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr))
+#define SET_ENDIAN(tsk, val) set_endian((tsk), (val))
+
+extern int get_endian(struct task_struct *tsk, unsigned long adr);
+extern int set_endian(struct task_struct *tsk, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
+extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned long msr_bits)
+{
+	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned long __pack_fe01(unsigned int fpmode)
+{
+	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+#ifdef CONFIG_PPC64
+#define cpu_relax()	do { HMT_low(); HMT_medium(); barrier(); } while (0)
+#else
+#define cpu_relax()	barrier()
+#endif
+
+/* Check that a certain kernel stack pointer is valid in task_struct p */
+int validate_sp(unsigned long sp, struct task_struct *p,
+                       unsigned long nbytes);
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#ifdef CONFIG_PPC64
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
new file mode 100644
index 000000000000..eb3bd2e1c7f6
--- /dev/null
+++ b/arch/powerpc/include/asm/prom.h
@@ -0,0 +1,356 @@
+#ifndef _POWERPC_PROM_H
+#define _POWERPC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
+#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header
+{
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	u32	dt_strings_size;	/* size of the DT strings block */
+	/* version 17 fields below */
+	u32	dt_struct_size;		/* size of the DT structure block */
+};
+
+
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+};
+
+struct device_node {
+	const char *name;
+	const char *type;
+	phandle	node;
+	phandle linux_phandle;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+	return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+	set_bit(flag, &n->_flags);
+}
+
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+					    const char *uname, int depth,
+					    void *data),
+				  void *data);
+extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+					unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#ifdef CONFIG_PPC32
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+#endif
+
+extern struct resource *request_OF_resource(struct device_node* node,
+				int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+
+/*
+ * OF address retreival & translation
+ */
+
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#ifdef CONFIG_PPC32
+static inline unsigned long of_read_ulong(const u32 *cell, int size)
+{
+	return cell[size-1];
+}
+#else
+#define of_read_ulong(cell, size)	of_read_number(cell, size)
+#endif
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+				    const u32 *in_addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+			   u64 *size, unsigned int *flags);
+#ifdef CONFIG_PCI
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+			       u64 *size, unsigned int *flags);
+#else
+static inline const u32 *of_get_pci_address(struct device_node *dev,
+		int bar_no, u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_PCI */
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+#ifdef CONFIG_PCI
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+				      struct resource *r);
+#else
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+		struct resource *r)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_PCI */
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+	struct device_node *controller;	/* Interrupt controller node */
+	u32 size;			/* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:	flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+			  u32 ointsize, const u32 *addr,
+			  struct of_irq *out_irq);
+
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:	the device whose interrupt is to be resolved
+ * @index:     	index of the interrupt to resolve
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:	the device whose interrupt is to be resolved
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+			struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device:	the device whose io range will be mapped
+ * @index:	index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
new file mode 100644
index 000000000000..f9e34c493cbb
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3.h
@@ -0,0 +1,519 @@
+/*
+ *  PS3 platform declarations.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_PS3_H)
+#define _ASM_POWERPC_PS3_H
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include "cell-pmu.h"
+
+union ps3_firmware_version {
+	u64 raw;
+	struct {
+		u16 pad;
+		u16 major;
+		u16 minor;
+		u16 rev;
+	};
+};
+
+void ps3_get_firmware_version(union ps3_firmware_version *v);
+int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev);
+
+/* 'Other OS' area */
+
+enum ps3_param_av_multi_out {
+	PS3_PARAM_AV_MULTI_OUT_NTSC = 0,
+	PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1,
+	PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2,
+	PS3_PARAM_AV_MULTI_OUT_SECAM = 3,
+};
+
+enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
+
+/* dma routines */
+
+enum ps3_dma_page_size {
+	PS3_DMA_4K = 12U,
+	PS3_DMA_64K = 16U,
+	PS3_DMA_1M = 20U,
+	PS3_DMA_16M = 24U,
+};
+
+enum ps3_dma_region_type {
+	PS3_DMA_OTHER = 0,
+	PS3_DMA_INTERNAL = 2,
+};
+
+struct ps3_dma_region_ops;
+
+/**
+ * struct ps3_dma_region - A per device dma state variables structure
+ * @did: The HV device id.
+ * @page_size: The ioc pagesize.
+ * @region_type: The HV region type.
+ * @bus_addr: The 'translated' bus address of the region.
+ * @len: The length in bytes of the region.
+ * @offset: The offset from the start of memory of the region.
+ * @ioid: The IOID of the device who owns this region
+ * @chunk_list: Opaque variable used by the ioc page manager.
+ * @region_ops: struct ps3_dma_region_ops - dma region operations
+ */
+
+struct ps3_dma_region {
+	struct ps3_system_bus_device *dev;
+	/* device variables */
+	const struct ps3_dma_region_ops *region_ops;
+	unsigned char ioid;
+	enum ps3_dma_page_size page_size;
+	enum ps3_dma_region_type region_type;
+	unsigned long len;
+	unsigned long offset;
+
+	/* driver variables  (set by ps3_dma_region_create) */
+	unsigned long bus_addr;
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} chunk_list;
+};
+
+struct ps3_dma_region_ops {
+	int (*create)(struct ps3_dma_region *);
+	int (*free)(struct ps3_dma_region *);
+	int (*map)(struct ps3_dma_region *,
+		   unsigned long virt_addr,
+		   unsigned long len,
+		   unsigned long *bus_addr,
+		   u64 iopte_pp);
+	int (*unmap)(struct ps3_dma_region *,
+		     unsigned long bus_addr,
+		     unsigned long len);
+};
+/**
+ * struct ps3_dma_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+struct ps3_system_bus_device;
+
+int ps3_dma_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_dma_region *r, enum ps3_dma_page_size page_size,
+	enum ps3_dma_region_type region_type, void *addr, unsigned long len);
+int ps3_dma_region_create(struct ps3_dma_region *r);
+int ps3_dma_region_free(struct ps3_dma_region *r);
+int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
+	unsigned long len, unsigned long *bus_addr,
+	u64 iopte_pp);
+int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+	unsigned long len);
+
+/* mmio routines */
+
+enum ps3_mmio_page_size {
+	PS3_MMIO_4K = 12U,
+	PS3_MMIO_64K = 16U
+};
+
+struct ps3_mmio_region_ops;
+/**
+ * struct ps3_mmio_region - a per device mmio state variables structure
+ *
+ * Current systems can be supported with a single region per device.
+ */
+
+struct ps3_mmio_region {
+	struct ps3_system_bus_device *dev;
+	const struct ps3_mmio_region_ops *mmio_ops;
+	unsigned long bus_addr;
+	unsigned long len;
+	enum ps3_mmio_page_size page_size;
+	unsigned long lpar_addr;
+};
+
+struct ps3_mmio_region_ops {
+	int (*create)(struct ps3_mmio_region *);
+	int (*free)(struct ps3_mmio_region *);
+};
+/**
+ * struct ps3_mmio_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+int ps3_mmio_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len,
+	enum ps3_mmio_page_size page_size);
+int ps3_mmio_region_create(struct ps3_mmio_region *r);
+int ps3_free_mmio_region(struct ps3_mmio_region *r);
+unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr);
+
+/* inrerrupt routines */
+
+enum ps3_cpu_binding {
+	PS3_BINDING_CPU_ANY = -1,
+	PS3_BINDING_CPU_0 = 0,
+	PS3_BINDING_CPU_1 = 1,
+};
+
+int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+	unsigned int *virq);
+int ps3_irq_plug_destroy(unsigned int virq);
+int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_event_receive_port_destroy(unsigned int virq);
+int ps3_send_event_locally(unsigned int virq);
+
+int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+	unsigned int *virq);
+int ps3_io_irq_destroy(unsigned int virq);
+int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
+	unsigned int *virq);
+int ps3_vuart_irq_destroy(unsigned int virq);
+int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
+	unsigned int class, unsigned int *virq);
+int ps3_spe_irq_destroy(unsigned int virq);
+
+int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
+	enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
+	unsigned int virq);
+
+/* lv1 result codes */
+
+enum lv1_result {
+	LV1_SUCCESS                     = 0,
+	/* not used                       -1 */
+	LV1_RESOURCE_SHORTAGE           = -2,
+	LV1_NO_PRIVILEGE                = -3,
+	LV1_DENIED_BY_POLICY            = -4,
+	LV1_ACCESS_VIOLATION            = -5,
+	LV1_NO_ENTRY                    = -6,
+	LV1_DUPLICATE_ENTRY             = -7,
+	LV1_TYPE_MISMATCH               = -8,
+	LV1_BUSY                        = -9,
+	LV1_EMPTY                       = -10,
+	LV1_WRONG_STATE                 = -11,
+	/* not used                       -12 */
+	LV1_NO_MATCH                    = -13,
+	LV1_ALREADY_CONNECTED           = -14,
+	LV1_UNSUPPORTED_PARAMETER_VALUE = -15,
+	LV1_CONDITION_NOT_SATISFIED     = -16,
+	LV1_ILLEGAL_PARAMETER_VALUE     = -17,
+	LV1_BAD_OPTION                  = -18,
+	LV1_IMPLEMENTATION_LIMITATION   = -19,
+	LV1_NOT_IMPLEMENTED             = -20,
+	LV1_INVALID_CLASS_ID            = -21,
+	LV1_CONSTRAINT_NOT_SATISFIED    = -22,
+	LV1_ALIGNMENT_ERROR             = -23,
+	LV1_HARDWARE_ERROR              = -24,
+	LV1_INVALID_DATA_FORMAT         = -25,
+	LV1_INVALID_OPERATION           = -26,
+	LV1_INTERNAL_ERROR              = -32768,
+};
+
+static inline const char* ps3_result(int result)
+{
+#if defined(DEBUG)
+	switch (result) {
+	case LV1_SUCCESS:
+		return "LV1_SUCCESS (0)";
+	case -1:
+		return "** unknown result ** (-1)";
+	case LV1_RESOURCE_SHORTAGE:
+		return "LV1_RESOURCE_SHORTAGE (-2)";
+	case LV1_NO_PRIVILEGE:
+		return "LV1_NO_PRIVILEGE (-3)";
+	case LV1_DENIED_BY_POLICY:
+		return "LV1_DENIED_BY_POLICY (-4)";
+	case LV1_ACCESS_VIOLATION:
+		return "LV1_ACCESS_VIOLATION (-5)";
+	case LV1_NO_ENTRY:
+		return "LV1_NO_ENTRY (-6)";
+	case LV1_DUPLICATE_ENTRY:
+		return "LV1_DUPLICATE_ENTRY (-7)";
+	case LV1_TYPE_MISMATCH:
+		return "LV1_TYPE_MISMATCH (-8)";
+	case LV1_BUSY:
+		return "LV1_BUSY (-9)";
+	case LV1_EMPTY:
+		return "LV1_EMPTY (-10)";
+	case LV1_WRONG_STATE:
+		return "LV1_WRONG_STATE (-11)";
+	case -12:
+		return "** unknown result ** (-12)";
+	case LV1_NO_MATCH:
+		return "LV1_NO_MATCH (-13)";
+	case LV1_ALREADY_CONNECTED:
+		return "LV1_ALREADY_CONNECTED (-14)";
+	case LV1_UNSUPPORTED_PARAMETER_VALUE:
+		return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)";
+	case LV1_CONDITION_NOT_SATISFIED:
+		return "LV1_CONDITION_NOT_SATISFIED (-16)";
+	case LV1_ILLEGAL_PARAMETER_VALUE:
+		return "LV1_ILLEGAL_PARAMETER_VALUE (-17)";
+	case LV1_BAD_OPTION:
+		return "LV1_BAD_OPTION (-18)";
+	case LV1_IMPLEMENTATION_LIMITATION:
+		return "LV1_IMPLEMENTATION_LIMITATION (-19)";
+	case LV1_NOT_IMPLEMENTED:
+		return "LV1_NOT_IMPLEMENTED (-20)";
+	case LV1_INVALID_CLASS_ID:
+		return "LV1_INVALID_CLASS_ID (-21)";
+	case LV1_CONSTRAINT_NOT_SATISFIED:
+		return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
+	case LV1_ALIGNMENT_ERROR:
+		return "LV1_ALIGNMENT_ERROR (-23)";
+	case LV1_HARDWARE_ERROR:
+		return "LV1_HARDWARE_ERROR (-24)";
+	case LV1_INVALID_DATA_FORMAT:
+		return "LV1_INVALID_DATA_FORMAT (-25)";
+	case LV1_INVALID_OPERATION:
+		return "LV1_INVALID_OPERATION (-26)";
+	case LV1_INTERNAL_ERROR:
+		return "LV1_INTERNAL_ERROR (-32768)";
+	default:
+		BUG();
+		return "** unknown result **";
+	};
+#else
+	return "";
+#endif
+}
+
+/* system bus routines */
+
+enum ps3_match_id {
+	PS3_MATCH_ID_EHCI           = 1,
+	PS3_MATCH_ID_OHCI           = 2,
+	PS3_MATCH_ID_GELIC          = 3,
+	PS3_MATCH_ID_AV_SETTINGS    = 4,
+	PS3_MATCH_ID_SYSTEM_MANAGER = 5,
+	PS3_MATCH_ID_STOR_DISK      = 6,
+	PS3_MATCH_ID_STOR_ROM       = 7,
+	PS3_MATCH_ID_STOR_FLASH     = 8,
+	PS3_MATCH_ID_SOUND          = 9,
+	PS3_MATCH_ID_GRAPHICS       = 10,
+	PS3_MATCH_ID_LPM            = 11,
+};
+
+#define PS3_MODULE_ALIAS_EHCI           "ps3:1"
+#define PS3_MODULE_ALIAS_OHCI           "ps3:2"
+#define PS3_MODULE_ALIAS_GELIC          "ps3:3"
+#define PS3_MODULE_ALIAS_AV_SETTINGS    "ps3:4"
+#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
+#define PS3_MODULE_ALIAS_STOR_DISK      "ps3:6"
+#define PS3_MODULE_ALIAS_STOR_ROM       "ps3:7"
+#define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
+#define PS3_MODULE_ALIAS_SOUND          "ps3:9"
+#define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
+#define PS3_MODULE_ALIAS_LPM            "ps3:11"
+
+enum ps3_system_bus_device_type {
+	PS3_DEVICE_TYPE_IOC0 = 1,
+	PS3_DEVICE_TYPE_SB,
+	PS3_DEVICE_TYPE_VUART,
+	PS3_DEVICE_TYPE_LPM,
+};
+
+enum ps3_match_sub_id {
+	/* for PS3_MATCH_ID_GRAPHICS */
+	PS3_MATCH_SUB_ID_FB		= 1,
+};
+
+/**
+ * struct ps3_system_bus_device - a device on the system bus
+ */
+
+struct ps3_system_bus_device {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	enum ps3_system_bus_device_type dev_type;
+
+	u64 bus_id;                       /* SB */
+	u64 dev_id;                       /* SB */
+	unsigned int interrupt_id;        /* SB */
+	struct ps3_dma_region *d_region;  /* SB, IOC0 */
+	struct ps3_mmio_region *m_region; /* SB, IOC0*/
+	unsigned int port_number;         /* VUART */
+	struct {                          /* LPM */
+		u64 node_id;
+		u64 pu_id;
+		u64 rights;
+	} lpm;
+
+/*	struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
+	struct device core;
+	void *driver_priv; /* private driver variables */
+};
+
+int ps3_open_hv_device(struct ps3_system_bus_device *dev);
+int ps3_close_hv_device(struct ps3_system_bus_device *dev);
+
+/**
+ * struct ps3_system_bus_driver - a driver for a device on the system bus
+ */
+
+struct ps3_system_bus_driver {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	struct device_driver core;
+	int (*probe)(struct ps3_system_bus_device *);
+	int (*remove)(struct ps3_system_bus_device *);
+	int (*shutdown)(struct ps3_system_bus_device *);
+/*	int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */
+/*	int (*resume)(struct ps3_system_bus_device *); */
+};
+
+int ps3_system_bus_device_register(struct ps3_system_bus_device *dev);
+int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv);
+void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv);
+
+static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv(
+	struct device_driver *_drv)
+{
+	return container_of(_drv, struct ps3_system_bus_driver, core);
+}
+static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev(
+	struct device *_dev)
+{
+	return container_of(_dev, struct ps3_system_bus_device, core);
+}
+static inline struct ps3_system_bus_driver *
+	ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev)
+{
+	BUG_ON(!_dev);
+	BUG_ON(!_dev->core.driver);
+	return ps3_drv_to_system_bus_drv(_dev->core.driver);
+}
+
+/**
+ * ps3_system_bus_set_drvdata -
+ * @dev: device structure
+ * @data: Data to set
+ */
+
+static inline void ps3_system_bus_set_driver_data(
+	struct ps3_system_bus_device *dev, void *data)
+{
+	dev->core.driver_data = data;
+}
+static inline void *ps3_system_bus_get_driver_data(
+	struct ps3_system_bus_device *dev)
+{
+	return dev->core.driver_data;
+}
+
+/* These two need global scope for get_dma_ops(). */
+
+extern struct bus_type ps3_system_bus_type;
+
+/* system manager */
+
+struct ps3_sys_manager_ops {
+	struct ps3_system_bus_device *dev;
+	void (*power_off)(struct ps3_system_bus_device *dev);
+	void (*restart)(struct ps3_system_bus_device *dev);
+};
+
+void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
+
+struct ps3_prealloc {
+    const char *name;
+    void *address;
+    unsigned long size;
+    unsigned long align;
+};
+
+extern struct ps3_prealloc ps3fb_videomemory;
+extern struct ps3_prealloc ps3flash_bounce_buffer;
+
+/* logical performance monitor */
+
+/**
+ * enum ps3_lpm_rights - Rigths granted by the system policy module.
+ *
+ * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
+ * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
+ */
+
+enum ps3_lpm_rights {
+	PS3_LPM_RIGHTS_USE_LPM = 0x001,
+	PS3_LPM_RIGHTS_USE_TB = 0x100,
+};
+
+/**
+ * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
+ *
+ * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
+ * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
+ *  rights @PS3_LPM_RIGHTS_USE_TB.
+ */
+
+enum ps3_lpm_tb_type {
+	PS3_LPM_TB_TYPE_NONE = 0,
+	PS3_LPM_TB_TYPE_INTERNAL = 1,
+};
+
+int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
+	u64 tb_cache_size);
+int ps3_lpm_close(void);
+int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
+	unsigned long *bytes_copied);
+int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
+	unsigned long count, unsigned long *bytes_copied);
+void ps3_set_bookmark(u64 bookmark);
+void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
+int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
+	u8 bus_word);
+
+u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
+void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+u32 ps3_read_ctr(u32 cpu, u32 ctr);
+void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
+void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
+void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
+void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+void ps3_enable_pm(u32 cpu);
+void ps3_disable_pm(u32 cpu);
+void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+void ps3_disable_pm_interrupts(u32 cpu);
+
+u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
+void ps3_sync_irq(int node);
+u32 ps3_get_hw_thread_id(int cpu);
+u64 ps3_get_spe_id(void *arg);
+
+#endif
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
new file mode 100644
index 000000000000..fda98715cd35
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -0,0 +1,744 @@
+/*
+ *  PS3 AV backend support.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_POWERPC_PS3AV_H_
+#define _ASM_POWERPC_PS3AV_H_
+
+/** command for ioctl() **/
+#define PS3AV_VERSION 0x205	/* version of ps3av command */
+
+#define PS3AV_CID_AV_INIT              0x00000001
+#define PS3AV_CID_AV_FIN               0x00000002
+#define PS3AV_CID_AV_GET_HW_CONF       0x00000003
+#define PS3AV_CID_AV_GET_MONITOR_INFO  0x00000004
+#define PS3AV_CID_AV_ENABLE_EVENT      0x00000006
+#define PS3AV_CID_AV_DISABLE_EVENT     0x00000007
+#define PS3AV_CID_AV_TV_MUTE           0x0000000a
+
+#define PS3AV_CID_AV_VIDEO_CS          0x00010001
+#define PS3AV_CID_AV_VIDEO_MUTE        0x00010002
+#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003
+#define PS3AV_CID_AV_AUDIO_PARAM       0x00020001
+#define PS3AV_CID_AV_AUDIO_MUTE        0x00020002
+#define PS3AV_CID_AV_HDMI_MODE         0x00040001
+
+#define PS3AV_CID_VIDEO_INIT           0x01000001
+#define PS3AV_CID_VIDEO_MODE           0x01000002
+#define PS3AV_CID_VIDEO_FORMAT         0x01000004
+#define PS3AV_CID_VIDEO_PITCH          0x01000005
+
+#define PS3AV_CID_AUDIO_INIT           0x02000001
+#define PS3AV_CID_AUDIO_MODE           0x02000002
+#define PS3AV_CID_AUDIO_MUTE           0x02000003
+#define PS3AV_CID_AUDIO_ACTIVE         0x02000004
+#define PS3AV_CID_AUDIO_INACTIVE       0x02000005
+#define PS3AV_CID_AUDIO_SPDIF_BIT      0x02000006
+#define PS3AV_CID_AUDIO_CTRL           0x02000007
+
+#define PS3AV_CID_EVENT_UNPLUGGED      0x10000001
+#define PS3AV_CID_EVENT_PLUGGED        0x10000002
+#define PS3AV_CID_EVENT_HDCP_DONE      0x10000003
+#define PS3AV_CID_EVENT_HDCP_FAIL      0x10000004
+#define PS3AV_CID_EVENT_HDCP_AUTH      0x10000005
+#define PS3AV_CID_EVENT_HDCP_ERROR     0x10000006
+
+#define PS3AV_CID_AVB_PARAM            0x04000001
+
+/* max backend ports */
+#define PS3AV_HDMI_MAX                 2	/* HDMI_0 HDMI_1 */
+#define PS3AV_AVMULTI_MAX              1	/* AVMULTI_0 */
+#define PS3AV_AV_PORT_MAX              (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX)
+#define PS3AV_OPT_PORT_MAX             1	/* SPDIF0 */
+#define PS3AV_HEAD_MAX                 2	/* HEAD_A HEAD_B */
+
+/* num of pkt for PS3AV_CID_AVB_PARAM */
+#define PS3AV_AVB_NUM_VIDEO            PS3AV_HEAD_MAX
+#define PS3AV_AVB_NUM_AUDIO            0	/* not supported */
+#define PS3AV_AVB_NUM_AV_VIDEO         PS3AV_AV_PORT_MAX
+#define PS3AV_AVB_NUM_AV_AUDIO         PS3AV_HDMI_MAX
+
+#define PS3AV_MUTE_PORT_MAX            1	/* num of ports in mute pkt */
+
+/* event_bit */
+#define PS3AV_CMD_EVENT_BIT_UNPLUGGED			(1 << 0)
+#define PS3AV_CMD_EVENT_BIT_PLUGGED			(1 << 1)
+#define PS3AV_CMD_EVENT_BIT_HDCP_DONE			(1 << 2)
+#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL			(1 << 3)
+#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH			(1 << 4)
+#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY		(1 << 5)
+
+/* common params */
+/* mute */
+#define PS3AV_CMD_MUTE_OFF				0x0000
+#define PS3AV_CMD_MUTE_ON				0x0001
+/* avport */
+#define PS3AV_CMD_AVPORT_HDMI_0				0x0000
+#define PS3AV_CMD_AVPORT_HDMI_1				0x0001
+#define PS3AV_CMD_AVPORT_AVMULTI_0			0x0010
+#define PS3AV_CMD_AVPORT_SPDIF_0			0x0020
+#define PS3AV_CMD_AVPORT_SPDIF_1			0x0021
+
+/* for av backend */
+/* av_mclk */
+#define PS3AV_CMD_AV_MCLK_128				0x0000
+#define PS3AV_CMD_AV_MCLK_256				0x0001
+#define PS3AV_CMD_AV_MCLK_512				0x0003
+/* av_inputlen */
+#define PS3AV_CMD_AV_INPUTLEN_16			0x02
+#define PS3AV_CMD_AV_INPUTLEN_20			0x0a
+#define PS3AV_CMD_AV_INPUTLEN_24			0x0b
+/* alayout */
+#define PS3AV_CMD_AV_LAYOUT_32				(1 << 0)
+#define PS3AV_CMD_AV_LAYOUT_44				(1 << 1)
+#define PS3AV_CMD_AV_LAYOUT_48				(1 << 2)
+#define PS3AV_CMD_AV_LAYOUT_88				(1 << 3)
+#define PS3AV_CMD_AV_LAYOUT_96				(1 << 4)
+#define PS3AV_CMD_AV_LAYOUT_176				(1 << 5)
+#define PS3AV_CMD_AV_LAYOUT_192				(1 << 6)
+/* hdmi_mode */
+#define PS3AV_CMD_AV_HDMI_MODE_NORMAL			0xff
+#define PS3AV_CMD_AV_HDMI_HDCP_OFF			0x01
+#define PS3AV_CMD_AV_HDMI_EDID_PASS			0x80
+#define PS3AV_CMD_AV_HDMI_DVI				0x40
+
+/* for video module */
+/* video_head */
+#define PS3AV_CMD_VIDEO_HEAD_A				0x0000
+#define PS3AV_CMD_VIDEO_HEAD_B				0x0001
+/* video_cs_out video_cs_in */
+#define PS3AV_CMD_VIDEO_CS_NONE				0x0000
+#define PS3AV_CMD_VIDEO_CS_RGB_8			0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV444_8			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV422_8			0x0003
+#define PS3AV_CMD_VIDEO_CS_XVYCC_8			0x0004
+#define PS3AV_CMD_VIDEO_CS_RGB_10			0x0005
+#define PS3AV_CMD_VIDEO_CS_YUV444_10			0x0006
+#define PS3AV_CMD_VIDEO_CS_YUV422_10			0x0007
+#define PS3AV_CMD_VIDEO_CS_XVYCC_10			0x0008
+#define PS3AV_CMD_VIDEO_CS_RGB_12			0x0009
+#define PS3AV_CMD_VIDEO_CS_YUV444_12			0x000a
+#define PS3AV_CMD_VIDEO_CS_YUV422_12			0x000b
+#define PS3AV_CMD_VIDEO_CS_XVYCC_12			0x000c
+/* video_vid */
+#define PS3AV_CMD_VIDEO_VID_NONE			0x0000
+#define PS3AV_CMD_VIDEO_VID_480I			0x0001
+#define PS3AV_CMD_VIDEO_VID_576I			0x0003
+#define PS3AV_CMD_VIDEO_VID_480P			0x0005
+#define PS3AV_CMD_VIDEO_VID_576P			0x0006
+#define PS3AV_CMD_VIDEO_VID_1080I_60HZ			0x0007
+#define PS3AV_CMD_VIDEO_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_VIDEO_VID_720P_60HZ			0x0009
+#define PS3AV_CMD_VIDEO_VID_720P_50HZ			0x000a
+#define PS3AV_CMD_VIDEO_VID_1080P_60HZ			0x000b
+#define PS3AV_CMD_VIDEO_VID_1080P_50HZ			0x000c
+#define PS3AV_CMD_VIDEO_VID_WXGA			0x000d
+#define PS3AV_CMD_VIDEO_VID_SXGA			0x000e
+#define PS3AV_CMD_VIDEO_VID_WUXGA			0x000f
+#define PS3AV_CMD_VIDEO_VID_480I_A			0x0010
+/* video_format */
+#define PS3AV_CMD_VIDEO_FORMAT_BLACK			0x0000
+#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT		0x0007
+/* video_order */
+#define PS3AV_CMD_VIDEO_ORDER_RGB			0x0000
+#define PS3AV_CMD_VIDEO_ORDER_BGR			0x0001
+/* video_fmt */
+#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8			0x0000
+/* video_out_format */
+#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT		0x0000
+/* video_cl_cnv */
+#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT		0x0000
+#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT		0x0010
+/* video_sync */
+#define PS3AV_CMD_VIDEO_SYNC_VSYNC			0x0001
+#define PS3AV_CMD_VIDEO_SYNC_CSYNC			0x0004
+#define PS3AV_CMD_VIDEO_SYNC_HSYNC			0x0010
+
+/* for audio module */
+/* num_of_ch */
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_2			0x0000
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_3			0x0001
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_4			0x0002
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_5			0x0003
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_6			0x0004
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_7			0x0005
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_8			0x0006
+/* audio_fs */
+#define PS3AV_CMD_AUDIO_FS_32K				0x0001
+#define PS3AV_CMD_AUDIO_FS_44K				0x0002
+#define PS3AV_CMD_AUDIO_FS_48K				0x0003
+#define PS3AV_CMD_AUDIO_FS_88K				0x0004
+#define PS3AV_CMD_AUDIO_FS_96K				0x0005
+#define PS3AV_CMD_AUDIO_FS_176K				0x0006
+#define PS3AV_CMD_AUDIO_FS_192K				0x0007
+/* audio_word_bits */
+#define PS3AV_CMD_AUDIO_WORD_BITS_16			0x0001
+#define PS3AV_CMD_AUDIO_WORD_BITS_20			0x0002
+#define PS3AV_CMD_AUDIO_WORD_BITS_24			0x0003
+/* audio_format */
+#define PS3AV_CMD_AUDIO_FORMAT_PCM			0x0001
+#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM		0x00ff
+/* audio_source */
+#define PS3AV_CMD_AUDIO_SOURCE_SERIAL			0x0000
+#define PS3AV_CMD_AUDIO_SOURCE_SPDIF			0x0001
+/* audio_swap */
+#define PS3AV_CMD_AUDIO_SWAP_0				0x0000
+#define PS3AV_CMD_AUDIO_SWAP_1				0x0000
+/* audio_map */
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0			0x0000
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1			0x0001
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2			0x0002
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3			0x0003
+/* audio_layout */
+#define PS3AV_CMD_AUDIO_LAYOUT_2CH			0x0000
+#define PS3AV_CMD_AUDIO_LAYOUT_6CH			0x000b	/* LREClr */
+#define PS3AV_CMD_AUDIO_LAYOUT_8CH			0x001f	/* LREClrXY */
+/* audio_downmix */
+#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED		0x0000
+#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED		0x0001
+
+/* audio_port */
+#define PS3AV_CMD_AUDIO_PORT_HDMI_0			( 1 << 0 )
+#define PS3AV_CMD_AUDIO_PORT_HDMI_1			( 1 << 1 )
+#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0			( 1 << 10 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_0			( 1 << 20 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_1			( 1 << 21 )
+
+/* audio_ctrl_id */
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS		0x0001
+#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK			0x0002
+/* audio_ctrl_data[0] reset */
+#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT		0x0001
+/* audio_ctrl_data[0] de-emphasis */
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON		0x0001
+/* audio_ctrl_data[0] avclk */
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22			0x0000
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18			0x0001
+
+/* av_vid */
+/* do not use these params directly, use vid_video2av */
+#define PS3AV_CMD_AV_VID_480I				0x0000
+#define PS3AV_CMD_AV_VID_480P				0x0001
+#define PS3AV_CMD_AV_VID_720P_60HZ			0x0002
+#define PS3AV_CMD_AV_VID_1080I_60HZ			0x0003
+#define PS3AV_CMD_AV_VID_1080P_60HZ			0x0004
+#define PS3AV_CMD_AV_VID_576I				0x0005
+#define PS3AV_CMD_AV_VID_576P				0x0006
+#define PS3AV_CMD_AV_VID_720P_50HZ			0x0007
+#define PS3AV_CMD_AV_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_AV_VID_1080P_50HZ			0x0009
+#define PS3AV_CMD_AV_VID_WXGA				0x000a
+#define PS3AV_CMD_AV_VID_SXGA				0x000b
+#define PS3AV_CMD_AV_VID_WUXGA				0x000c
+/* av_cs_out av_cs_in */
+/* use cs_video2av() */
+#define PS3AV_CMD_AV_CS_RGB_8				0x0000
+#define PS3AV_CMD_AV_CS_YUV444_8			0x0001
+#define PS3AV_CMD_AV_CS_YUV422_8			0x0002
+#define PS3AV_CMD_AV_CS_XVYCC_8				0x0003
+#define PS3AV_CMD_AV_CS_RGB_10				0x0004
+#define PS3AV_CMD_AV_CS_YUV444_10			0x0005
+#define PS3AV_CMD_AV_CS_YUV422_10			0x0006
+#define PS3AV_CMD_AV_CS_XVYCC_10			0x0007
+#define PS3AV_CMD_AV_CS_RGB_12				0x0008
+#define PS3AV_CMD_AV_CS_YUV444_12			0x0009
+#define PS3AV_CMD_AV_CS_YUV422_12			0x000a
+#define PS3AV_CMD_AV_CS_XVYCC_12			0x000b
+#define PS3AV_CMD_AV_CS_8				0x0000
+#define PS3AV_CMD_AV_CS_10				0x0001
+#define PS3AV_CMD_AV_CS_12				0x0002
+/* dither */
+#define PS3AV_CMD_AV_DITHER_OFF				0x0000
+#define PS3AV_CMD_AV_DITHER_ON				0x0001
+#define PS3AV_CMD_AV_DITHER_8BIT			0x0000
+#define PS3AV_CMD_AV_DITHER_10BIT			0x0002
+#define PS3AV_CMD_AV_DITHER_12BIT			0x0004
+/* super_white */
+#define PS3AV_CMD_AV_SUPER_WHITE_OFF			0x0000
+#define PS3AV_CMD_AV_SUPER_WHITE_ON			0x0001
+/* aspect */
+#define PS3AV_CMD_AV_ASPECT_16_9			0x0000
+#define PS3AV_CMD_AV_ASPECT_4_3				0x0001
+/* video_cs_cnv() */
+#define PS3AV_CMD_VIDEO_CS_RGB				0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV422			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV444			0x0003
+
+/* for broadcast automode */
+#define PS3AV_RESBIT_720x480P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_720x576P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_1280x720P			0x0004
+#define PS3AV_RESBIT_1920x1080I			0x0008
+#define PS3AV_RESBIT_1920x1080P			0x4000
+#define PS3AV_RES_MASK_60			(PS3AV_RESBIT_720x480P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+#define PS3AV_RES_MASK_50			(PS3AV_RESBIT_720x576P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+
+/* for VESA automode */
+#define PS3AV_RESBIT_VGA			0x0001
+#define PS3AV_RESBIT_WXGA			0x0002
+#define PS3AV_RESBIT_SXGA			0x0004
+#define PS3AV_RESBIT_WUXGA			0x0008
+#define PS3AV_RES_MASK_VESA			(PS3AV_RESBIT_WXGA |\
+						 PS3AV_RESBIT_SXGA |\
+						 PS3AV_RESBIT_WUXGA)
+
+#define PS3AV_MONITOR_TYPE_HDMI			1	/* HDMI */
+#define PS3AV_MONITOR_TYPE_DVI			2	/* DVI */
+
+
+/* for video mode */
+enum ps3av_mode_num {
+	PS3AV_MODE_AUTO				= 0,
+	PS3AV_MODE_480I				= 1,
+	PS3AV_MODE_480P				= 2,
+	PS3AV_MODE_720P60			= 3,
+	PS3AV_MODE_1080I60			= 4,
+	PS3AV_MODE_1080P60			= 5,
+	PS3AV_MODE_576I				= 6,
+	PS3AV_MODE_576P				= 7,
+	PS3AV_MODE_720P50			= 8,
+	PS3AV_MODE_1080I50			= 9,
+	PS3AV_MODE_1080P50			= 10,
+	PS3AV_MODE_WXGA				= 11,
+	PS3AV_MODE_SXGA				= 12,
+	PS3AV_MODE_WUXGA			= 13,
+};
+
+#define PS3AV_MODE_MASK				0x000F
+#define PS3AV_MODE_HDCP_OFF			0x1000	/* Retail PS3 product doesn't support this */
+#define PS3AV_MODE_DITHER			0x0800
+#define PS3AV_MODE_COLOR			0x0400
+#define PS3AV_MODE_WHITE			0x0200
+#define PS3AV_MODE_FULL				0x0080
+#define PS3AV_MODE_DVI				0x0040
+#define PS3AV_MODE_RGB				0x0020
+
+
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60	PS3AV_MODE_480P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60	PS3AV_MODE_480I
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50	PS3AV_MODE_576P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50	PS3AV_MODE_576I
+
+#define PS3AV_REGION_60				0x01
+#define PS3AV_REGION_50				0x02
+#define PS3AV_REGION_RGB			0x10
+
+#define get_status(buf)				(((__u32 *)buf)[2])
+#define PS3AV_HDR_SIZE				4	/* version + size */
+
+
+/** command packet structure **/
+struct ps3av_send_hdr {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+};
+
+struct ps3av_reply_hdr {
+	u16 version;
+	u16 size;
+	u32 cid;
+	u32 status;
+};
+
+/* backend: initialization */
+struct ps3av_pkt_av_init {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;
+};
+
+/* backend: finalize */
+struct ps3av_pkt_av_fin {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* backend: get port */
+struct ps3av_pkt_av_get_hw_conf {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 status;
+	u16 num_of_hdmi;	/* out: number of hdmi */
+	u16 num_of_avmulti;	/* out: number of avmulti */
+	u16 num_of_spdif;	/* out: number of hdmi */
+	u16 reserved;
+};
+
+/* backend: get monitor info */
+struct ps3av_info_resolution {
+	u32 res_bits;
+	u32 native;
+};
+
+struct ps3av_info_cs {
+	u8 rgb;
+	u8 yuv444;
+	u8 yuv422;
+	u8 reserved;
+};
+
+struct ps3av_info_color {
+	u16 red_x;
+	u16 red_y;
+	u16 green_x;
+	u16 green_y;
+	u16 blue_x;
+	u16 blue_y;
+	u16 white_x;
+	u16 white_y;
+	u32 gamma;
+};
+
+struct ps3av_info_audio {
+	u8 type;
+	u8 max_num_of_ch;
+	u8 fs;
+	u8 sbit;
+};
+
+struct ps3av_info_monitor {
+	u8 avport;
+	u8 monitor_id[10];
+	u8 monitor_type;
+	u8 monitor_name[16];
+	struct ps3av_info_resolution res_60;
+	struct ps3av_info_resolution res_50;
+	struct ps3av_info_resolution res_other;
+	struct ps3av_info_resolution res_vesa;
+	struct ps3av_info_cs cs;
+	struct ps3av_info_color color;
+	u8 supported_ai;
+	u8 speaker_info;
+	u8 num_of_audio_block;
+	struct ps3av_info_audio audio[0];	/* 0 or more audio blocks */
+	u8 reserved[169];
+} __attribute__ ((packed));
+
+struct ps3av_pkt_av_get_monitor_info {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	/* recv */
+	struct ps3av_info_monitor info;	/* out: monitor info */
+};
+
+/* backend: enable/disable event */
+struct ps3av_pkt_av_event {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;		/* in */
+};
+
+/* backend: video cs param */
+struct ps3av_pkt_av_video_cs {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 av_vid;		/* in: video resolution */
+	u16 av_cs_out;		/* in: output color space */
+	u16 av_cs_in;		/* in: input color space */
+	u8 dither;		/* in: dither bit length */
+	u8 bitlen_out;		/* in: bit length */
+	u8 super_white;		/* in: super white */
+	u8 aspect;		/* in: aspect ratio */
+};
+
+/* backend: video mute */
+struct ps3av_av_mute {
+	u16 avport;		/* in: avport */
+	u16 mute;		/* in: mute on/off */
+};
+
+struct ps3av_pkt_av_video_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: video disable signal */
+struct ps3av_pkt_av_video_disable_sig {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+};
+
+/* backend: audio param */
+struct ps3av_audio_info_frame {
+	struct pb1_bit {
+		u8 ct:4;
+		u8 rsv:1;
+		u8 cc:3;
+	} pb1;
+	struct pb2_bit {
+		u8 rsv:3;
+		u8 sf:3;
+		u8 ss:2;
+	} pb2;
+	u8 pb3;
+	u8 pb4;
+	struct pb5_bit {
+		u8 dm:1;
+		u8 lsv:4;
+		u8 rsv:3;
+	} pb5;
+};
+
+struct ps3av_pkt_av_audio_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	u8 mclk;		/* in: audio mclk */
+	u8 ns[3];		/* in: audio ns val */
+	u8 enable;		/* in: audio enable */
+	u8 swaplr;		/* in: audio swap */
+	u8 fifomap;		/* in: audio fifomap */
+	u8 inputctrl;		/* in: audio input ctrl */
+	u8 inputlen;		/* in: sample bit size */
+	u8 layout;		/* in: speaker layout param */
+	struct ps3av_audio_info_frame info;	/* in: info */
+	u8 chstat[5];		/* in: ch stat */
+};
+
+/* backend: audio_mute */
+struct ps3av_pkt_av_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: hdmi_mode */
+struct ps3av_pkt_av_hdmi_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 mode;		/* in: hdmi_mode */
+	u8 reserved0;
+	u8 reserved1;
+	u8 reserved2;
+};
+
+/* backend: tv_mute */
+struct ps3av_pkt_av_tv_mute {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport HDMI only */
+	u16 mute;		/* in: mute */
+};
+
+/* video: initialize */
+struct ps3av_pkt_video_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* video: mode setting */
+struct ps3av_pkt_video_mode {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 reserved;
+	u32 video_vid;		/* in: video resolution */
+	u16 reserved1;
+	u16 width;		/* in: width in pixel */
+	u16 reserved2;
+	u16 height;		/* in: height in pixel */
+	u32 pitch;		/* in: line size in byte */
+	u32 video_out_format;	/* in: out format */
+	u32 video_format;	/* in: input frame buffer format */
+	u8 reserved3;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+	u32 reserved4;
+};
+
+/* video: format */
+struct ps3av_pkt_video_format {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 video_format;	/* in: frame buffer format */
+	u8 reserved;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+};
+
+/* video: pitch */
+struct ps3av_pkt_video_pitch {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 video_head;		/* in: head */
+	u32 pitch;		/* in: line size in byte */
+};
+
+/* audio: initialize */
+struct ps3av_pkt_audio_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* audio: mode setting */
+struct ps3av_pkt_audio_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 avport;		/* in: avport */
+	u8 reserved0[3];
+	u32 mask;		/* in: mask */
+	u32 audio_num_of_ch;	/* in: number of ch */
+	u32 audio_fs;		/* in: sampling freq */
+	u32 audio_word_bits;	/* in: sample bit size */
+	u32 audio_format;	/* in: audio output format */
+	u32 audio_source;	/* in: audio source */
+	u8 audio_enable[4];	/* in: audio enable */
+	u8 audio_swap[4];	/* in: audio swap */
+	u8 audio_map[4];	/* in: audio map */
+	u32 audio_layout;	/* in: speaker layout */
+	u32 audio_downmix;	/* in: audio downmix permission */
+	u32 audio_downmix_level;
+	u8 audio_cs_info[8];	/* in: IEC channel status */
+};
+
+/* audio: mute */
+struct ps3av_audio_mute {
+	u8 avport;		/* in: opt_port optical */
+	u8 reserved[3];
+	u32 mute;		/* in: mute */
+};
+
+struct ps3av_pkt_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX];
+};
+
+/* audio: active/inactive */
+struct ps3av_pkt_audio_active {
+	struct ps3av_send_hdr send_hdr;
+	u32 audio_port;		/* in: audio active/inactive port */
+};
+
+/* audio: SPDIF user bit */
+struct ps3av_pkt_audio_spdif_bit {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u8 avport;		/* in: avport SPDIF only */
+	u8 reserved[3];
+	u32 audio_port;		/* in: SPDIF only */
+	u32 spdif_bit_data[12];	/* in: user bit data */
+};
+
+/* audio: audio control */
+struct ps3av_pkt_audio_ctrl {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 audio_ctrl_id;	/* in: control id */
+	u32 audio_ctrl_data[4];	/* in: control data */
+};
+
+/* avb:param */
+#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE	\
+	(PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \
+	 PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \
+	 PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \
+	 PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param))
+
+struct ps3av_pkt_avb_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 num_of_video_pkt;
+	u16 num_of_audio_pkt;
+	u16 num_of_av_video_pkt;
+	u16 num_of_av_audio_pkt;
+	/*
+	 * The actual buffer layout depends on the fields above:
+	 *
+	 * struct ps3av_pkt_video_mode video[num_of_video_pkt];
+	 * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt];
+	 * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt];
+	 * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt];
+	 */
+	u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
+};
+
+
+/** command status **/
+#define PS3AV_STATUS_SUCCESS			0x0000	/* success */
+#define PS3AV_STATUS_RECEIVE_VUART_ERROR	0x0001	/* receive vuart error */
+#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL	0x0002	/* syscon communication error */
+#define PS3AV_STATUS_INVALID_COMMAND		0x0003	/* obsolete invalid CID */
+#define PS3AV_STATUS_INVALID_PORT		0x0004	/* invalid port number */
+#define PS3AV_STATUS_INVALID_VID		0x0005	/* invalid video format */
+#define PS3AV_STATUS_INVALID_COLOR_SPACE	0x0006	/* invalid video colose space */
+#define PS3AV_STATUS_INVALID_FS			0x0007	/* invalid audio sampling freq */
+#define PS3AV_STATUS_INVALID_AUDIO_CH		0x0008	/* invalid audio channel number */
+#define PS3AV_STATUS_UNSUPPORTED_VERSION	0x0009	/* version mismatch  */
+#define PS3AV_STATUS_INVALID_SAMPLE_SIZE	0x000a	/* invalid audio sample bit size */
+#define PS3AV_STATUS_FAILURE			0x000b	/* other failures */
+#define PS3AV_STATUS_UNSUPPORTED_COMMAND	0x000c	/* unsupported cid */
+#define PS3AV_STATUS_BUFFER_OVERFLOW		0x000d	/* write buffer overflow */
+#define PS3AV_STATUS_INVALID_VIDEO_PARAM	0x000e	/* invalid video param */
+#define PS3AV_STATUS_NO_SEL			0x000f	/* not exist selector */
+#define PS3AV_STATUS_INVALID_AV_PARAM		0x0010	/* invalid backend param */
+#define PS3AV_STATUS_INVALID_AUDIO_PARAM	0x0011	/* invalid audio param */
+#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE	0x0012	/* unsupported hdmi mode */
+#define PS3AV_STATUS_NO_SYNC_HEAD		0x0013	/* sync head failed */
+
+extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *);
+extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *);
+
+extern int ps3av_cmd_init(void);
+extern int ps3av_cmd_fin(void);
+extern int ps3av_cmd_av_video_mute(int, u32 *, u32);
+extern int ps3av_cmd_av_video_disable_sig(u32);
+extern int ps3av_cmd_av_tv_mute(u32, u32);
+extern int ps3av_cmd_enable_event(void);
+extern int ps3av_cmd_av_hdmi_mode(u8);
+extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32);
+extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32);
+extern int ps3av_cmd_video_format_black(u32, u32, u32);
+extern int ps3av_cmd_av_audio_mute(int, u32 *, u32);
+extern u32 ps3av_cmd_set_av_audio_param(void *, u32,
+					const struct ps3av_pkt_audio_mode *,
+					u32);
+extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32,
+				     u32, u32, u32, u32);
+extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *);
+extern int ps3av_cmd_audio_mute(int, u32 *, u32);
+extern int ps3av_cmd_audio_active(int, u32);
+extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32);
+extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *);
+extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
+					    u32);
+
+extern int ps3av_set_video_mode(u32);
+extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
+extern int ps3av_get_auto_mode(void);
+extern int ps3av_get_mode(void);
+extern int ps3av_video_mode2res(u32, u32 *, u32 *);
+extern int ps3av_video_mute(int);
+extern int ps3av_audio_mute(int);
+extern int ps3av_dev_open(void);
+extern int ps3av_dev_close(void);
+extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
+				    void *flip_data);
+extern void ps3av_flip_ctl(int on);
+
+#endif	/* _ASM_POWERPC_PS3AV_H_ */
diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
new file mode 100644
index 000000000000..3f121fe4010d
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3fb.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3FB_H_
+#define _ASM_POWERPC_PS3FB_H_
+
+#include <linux/ioctl.h>
+
+/* ioctl */
+#define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */
+#define PS3FB_IOCTL_GETMODE       _IOR('r',  2, int) /* get video mode */
+#define PS3FB_IOCTL_SCREENINFO    _IOR('r',  3, int) /* get screen info */
+#define PS3FB_IOCTL_ON            _IO('r', 4)        /* use IOCTL_FSEL */
+#define PS3FB_IOCTL_OFF           _IO('r', 5)        /* return to normal-flip */
+#define PS3FB_IOCTL_FSEL          _IOW('r', 6, int)  /* blit and flip request */
+
+#ifndef FBIO_WAITFORVSYNC
+#define FBIO_WAITFORVSYNC         _IOW('F', 0x20, __u32) /* wait for vsync */
+#endif
+
+struct ps3fb_ioctl_res {
+	__u32 xres; /* frame buffer x_size */
+	__u32 yres; /* frame buffer y_size */
+	__u32 xoff; /* margine x  */
+	__u32 yoff; /* margine y */
+	__u32 num_frames; /* num of frame buffers */
+};
+
+#endif /* _ASM_POWERPC_PS3FB_H_ */
diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h
new file mode 100644
index 000000000000..6fcaf714fa50
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3stor.h
@@ -0,0 +1,71 @@
+/*
+ * PS3 Storage Devices
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3STOR_H_
+#define _ASM_POWERPC_PS3STOR_H_
+
+#include <linux/interrupt.h>
+
+#include <asm/ps3.h>
+
+
+struct ps3_storage_region {
+	unsigned int id;
+	u64 start;
+	u64 size;
+};
+
+struct ps3_storage_device {
+	struct ps3_system_bus_device sbd;
+
+	struct ps3_dma_region dma_region;
+	unsigned int irq;
+	u64 blk_size;
+
+	u64 tag;
+	u64 lv1_status;
+	struct completion done;
+
+	unsigned long bounce_size;
+	void *bounce_buf;
+	u64 bounce_lpar;
+	dma_addr_t bounce_dma;
+
+	unsigned int num_regions;
+	unsigned long accessible_regions;
+	unsigned int region_idx;		/* first accessible region */
+	struct ps3_storage_region regions[0];	/* Must be last */
+};
+
+static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev)
+{
+	return container_of(dev, struct ps3_storage_device, sbd.core);
+}
+
+extern int ps3stor_setup(struct ps3_storage_device *dev,
+			 irq_handler_t handler);
+extern void ps3stor_teardown(struct ps3_storage_device *dev);
+extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
+				      u64 start_sector, u64 sectors,
+				      int write);
+extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd,
+				u64 arg1, u64 arg2, u64 arg3, u64 arg4);
+
+#endif /* _ASM_POWERPC_PS3STOR_H_ */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
new file mode 100644
index 000000000000..734e0754fb9b
--- /dev/null
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -0,0 +1,293 @@
+#ifndef _ASM_POWERPC_PTRACE_H
+#define _ASM_POWERPC_PTRACE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+#ifdef __powerpc64__
+	unsigned long softe;		/* Soft enabled/disabled */
+#else
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+#endif
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result;		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __powerpc64__
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
+					STACK_FRAME_OVERHEAD + 288)
+#define STACK_FRAME_MARKER	12
+
+/* Size of dummy stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	128
+#define __SIGNAL_FRAMESIZE32	64
+
+#else /* __powerpc64__ */
+
+#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define STACK_FRAME_MARKER	2
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	64
+
+#endif /* __powerpc64__ */
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->nip)
+#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define regs_return_value(regs) ((regs)->gpr[3])
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#ifdef __powerpc64__
+#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
+#else
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+#endif
+
+#define force_successful_syscall_return()   \
+	do { \
+		set_thread_flag(TIF_NOERROR); \
+	} while(0)
+
+struct task_struct;
+extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
+extern int ptrace_put_reg(struct task_struct *task, int regno,
+			  unsigned long data);
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#ifndef __powerpc64__
+#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
+#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
+#endif /* ! __powerpc64__ */
+#define TRAP(regs)		((regs)->trap & ~0xF)
+#ifdef __powerpc64__
+#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
+#else
+#define CHECK_FULL_REGS(regs)						      \
+do {									      \
+	if ((regs)->trap & 1)						      \
+		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __powerpc64__ */
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#define PT_ORIG_R3 34
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#ifndef __powerpc64__
+#define PT_MQ	39
+#else
+#define PT_SOFTE 39
+#endif
+#define PT_TRAP	40
+#define PT_DAR	41
+#define PT_DSISR 42
+#define PT_RESULT 43
+#define PT_REGS_COUNT 44
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+
+#ifndef __powerpc64__
+
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#else /* __powerpc64__ */
+
+#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
+
+#ifdef __KERNEL__
+#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
+#endif
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+#ifdef __KERNEL__
+#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
+#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
+#define PT_VRSAVE_32 (PT_VR0 + 33*4)
+#endif
+
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
+#endif
+#endif /* __powerpc64__ */
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the same
+ * structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS	27
+#define PTRACE_SETVSRREGS	28
+
+/*
+ * Get or set a debug register. The first 16 are DABR registers and the
+ * second 16 are IABR registers.
+ */
+#define PTRACE_GET_DEBUGREG	25
+#define PTRACE_SET_DEBUGREG	26
+
+/* (new) PTRACE requests using the same numbers as x86 and the same
+ * argument ordering. Additionally, they support more registers too
+ */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+
+/* (old) PTRACE requests with inverted arguments */
+#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
+#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
+#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
+#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
+
+/* Calls to trace a 64bit program from a 32bit program */
+#define PPC_PTRACE_PEEKTEXT_3264 0x95
+#define PPC_PTRACE_PEEKDATA_3264 0x94
+#define PPC_PTRACE_POKETEXT_3264 0x93
+#define PPC_PTRACE_POKEDATA_3264 0x92
+#define PPC_PTRACE_PEEKUSR_3264  0x91
+#define PPC_PTRACE_POKEUSR_3264  0x90
+
+#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
new file mode 100644
index 000000000000..edee15d269ea
--- /dev/null
+++ b/arch/powerpc/include/asm/qe.h
@@ -0,0 +1,642 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/cpm.h>
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_BRGS	16
+#define QE_NUM_OF_PORTS	1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM		0
+#define MEM_PART_SECONDARY	1
+#define MEM_PART_MURAM		2
+
+/* Clocks and BRGs */
+enum qe_clock {
+	QE_CLK_NONE = 0,
+	QE_BRG1,		/* Baud Rate Generator 1 */
+	QE_BRG2,		/* Baud Rate Generator 2 */
+	QE_BRG3,		/* Baud Rate Generator 3 */
+	QE_BRG4,		/* Baud Rate Generator 4 */
+	QE_BRG5,		/* Baud Rate Generator 5 */
+	QE_BRG6,		/* Baud Rate Generator 6 */
+	QE_BRG7,		/* Baud Rate Generator 7 */
+	QE_BRG8,		/* Baud Rate Generator 8 */
+	QE_BRG9,		/* Baud Rate Generator 9 */
+	QE_BRG10,		/* Baud Rate Generator 10 */
+	QE_BRG11,		/* Baud Rate Generator 11 */
+	QE_BRG12,		/* Baud Rate Generator 12 */
+	QE_BRG13,		/* Baud Rate Generator 13 */
+	QE_BRG14,		/* Baud Rate Generator 14 */
+	QE_BRG15,		/* Baud Rate Generator 15 */
+	QE_BRG16,		/* Baud Rate Generator 16 */
+	QE_CLK1,		/* Clock 1 */
+	QE_CLK2,		/* Clock 2 */
+	QE_CLK3,		/* Clock 3 */
+	QE_CLK4,		/* Clock 4 */
+	QE_CLK5,		/* Clock 5 */
+	QE_CLK6,		/* Clock 6 */
+	QE_CLK7,		/* Clock 7 */
+	QE_CLK8,		/* Clock 8 */
+	QE_CLK9,		/* Clock 9 */
+	QE_CLK10,		/* Clock 10 */
+	QE_CLK11,		/* Clock 11 */
+	QE_CLK12,		/* Clock 12 */
+	QE_CLK13,		/* Clock 13 */
+	QE_CLK14,		/* Clock 14 */
+	QE_CLK15,		/* Clock 15 */
+	QE_CLK16,		/* Clock 16 */
+	QE_CLK17,		/* Clock 17 */
+	QE_CLK18,		/* Clock 18 */
+	QE_CLK19,		/* Clock 19 */
+	QE_CLK20,		/* Clock 20 */
+	QE_CLK21,		/* Clock 21 */
+	QE_CLK22,		/* Clock 22 */
+	QE_CLK23,		/* Clock 23 */
+	QE_CLK24,		/* Clock 24 */
+	QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+	return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+extern void __init qe_reset(void);
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+	__be32	cpodr;		/* Open drain register */
+	__be32	cpdata;		/* Data register */
+	__be32	cpdir1;		/* Direction register */
+	__be32	cpdir2;		/* Direction register */
+	__be32	cppar1;		/* Pin assignment register */
+	__be32	cppar2;		/* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+	u8	pad[8];
+#endif
+};
+
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN	2
+#define QE_PIO_DIR_OUT	1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+				int dir, int open_drain, int assignment,
+				int has_irq);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+			     int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+	struct qe_header {
+		__be32 length;  /* Length of the entire structure, in bytes */
+		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
+		u8 version;     /* Version of this layout. First ver is '1' */
+	} header;
+	u8 id[62];      /* Null-terminated identifier string */
+	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
+	u8 count;       /* Number of microcode[] structures */
+	struct {
+		__be16 model;   	/* The SOC model  */
+		u8 major;       	/* The SOC revision major */
+		u8 minor;       	/* The SOC revision minor */
+	} __attribute__ ((packed)) soc;
+	u8 padding[4];			/* Reserved, for alignment */
+	__be64 extended_modes;		/* Extended modes */
+	__be32 vtraps[8];		/* Virtual trap addresses */
+	u8 reserved[4];			/* Reserved, for future expansion */
+	struct qe_microcode {
+		u8 id[32];      	/* Null-terminated identifier */
+		__be32 traps[16];       /* Trap addresses, 0 == ignore */
+		__be32 eccr;    	/* The value for the ECCR register */
+		__be32 iram_offset;     /* Offset into I-RAM for the code */
+		__be32 count;   	/* Number of 32-bit words of the code */
+		__be32 code_offset;     /* Offset of the actual microcode */
+		u8 major;       	/* The microcode version major */
+		u8 minor;       	/* The microcode version minor */
+		u8 revision;		/* The microcode version revision */
+		u8 padding;		/* Reserved, for alignment */
+		u8 reserved[4];		/* Reserved, for future expansion */
+	} __attribute__ ((packed)) microcode[1];
+	/* All microcode binaries should be located here */
+	/* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+	char id[64];		/* Firmware name */
+	u32 vtraps[8];		/* Virtual trap addresses */
+	u64 extended_modes;	/* Extended modes */
+};
+
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+	__be16 status;
+	__be16 length;
+	__be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK	0xffff0000
+#define BD_LENGTH_MASK	0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN	16	/* ??? */
+#define QE_ALIGNMENT_OF_BD	8
+#define QE_ALIGNMENT_OF_PRAM	64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
+	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
+	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
+						   RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 8 bytes */
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+		= 0x0,/* not used */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+	u16 tm_base;		/* QE timer table base adr */
+	u16 tm_ptr;		/* QE timer table pointer */
+	u16 r_tmr;		/* QE timer mode register */
+	u16 r_tmv;		/* QE timer valid register */
+	u32 tm_cmd;		/* QE timer cmd register */
+	u32 tm_cnt;		/* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE	8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+	u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+	COMM_DIR_NONE = 0,
+	COMM_DIR_RX = 1,
+	COMM_DIR_TX = 2,
+	COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG		0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXUCR_GRANT			0x00008000
+#define QE_CMXUCR_TSA			0x00004000
+#define QE_CMXUCR_BKPT			0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG		0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXGCR_USBCS			0x0000000f
+#define QE_CMXGCR_USBCS_CLK3		0x1
+#define QE_CMXGCR_USBCS_CLK5		0x2
+#define QE_CMXGCR_USBCS_CLK7		0x3
+#define QE_CMXGCR_USBCS_CLK9		0x4
+#define QE_CMXGCR_USBCS_CLK13		0x5
+#define QE_CMXGCR_USBCS_CLK17		0x6
+#define QE_CMXGCR_USBCS_CLK19		0x7
+#define QE_CMXGCR_USBCS_CLK21		0x8
+#define QE_CMXGCR_USBCS_BRG9		0x9
+#define QE_CMXGCR_USBCS_BRG10		0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG			0x00010000
+#define QE_RESET			0x80000000
+#define QE_INIT_TX_RX			0x00000000
+#define QE_INIT_RX			0x00000001
+#define QE_INIT_TX			0x00000002
+#define QE_ENTER_HUNT_MODE		0x00000003
+#define QE_STOP_TX			0x00000004
+#define QE_GRACEFUL_STOP_TX		0x00000005
+#define QE_RESTART_TX			0x00000006
+#define QE_CLOSE_RX_BD			0x00000007
+#define QE_SWITCH_COMMAND		0x00000007
+#define QE_SET_GROUP_ADDRESS		0x00000008
+#define QE_START_IDMA			0x00000009
+#define QE_MCC_STOP_RX			0x00000009
+#define QE_ATM_TRANSMIT			0x0000000a
+#define QE_HPAC_CLEAR_ALL		0x0000000b
+#define QE_GRACEFUL_STOP_RX		0x0000001a
+#define QE_RESTART_RX			0x0000001b
+#define QE_HPAC_SET_PRIORITY		0x0000010b
+#define QE_HPAC_STOP_TX			0x0000020b
+#define QE_HPAC_STOP_RX			0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
+#define QE_HPAC_START_TX		0x0000060b
+#define QE_HPAC_START_RX		0x0000070b
+#define QE_USB_STOP_TX			0x0000000a
+#define QE_USB_RESTART_TX		0x0000000c
+#define QE_QMC_STOP_TX			0x0000000c
+#define QE_QMC_STOP_RX			0x0000000d
+#define QE_SS7_SU_FIL_RESET		0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS			0x0000000a
+#define QE_MCC_INIT_TX_RX_16		0x00000003
+#define QE_MCC_STOP_TX			0x00000004
+#define QE_MCC_INIT_TX_1		0x00000005
+#define QE_MCC_INIT_RX_1		0x00000006
+#define QE_MCC_RESET			0x00000007
+#define QE_SET_TIMER			0x00000008
+#define QE_RANDOM_NUMBER		0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT	0x00000011
+#define QE_ASSIGN_PAGE			0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
+#define QE_START_FLOW_CONTROL		0x00000014
+#define QE_STOP_FLOW_CONTROL		0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
+
+#define QE_ASSIGN_RISC			0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT		6
+#define QE_CR_MCN_USB_SHIFT		4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
+#define QE_CR_SNUM_SHIFT		17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID		0x00000000
+#define QE_CR_SUBBLOCK_USB		0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
+#define QE_CR_SUBBLOCK_MCC1		0x03800000
+#define QE_CR_SUBBLOCK_MCC2		0x03a00000
+#define QE_CR_SUBBLOCK_MCC3		0x03000000
+#define QE_CR_SUBBLOCK_IDMA1		0x02800000
+#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
+#define QE_CR_SUBBLOCK_HPAC		0x01e00000
+#define QE_CR_SUBBLOCK_SPI1		0x01400000
+#define QE_CR_SUBBLOCK_SPI2		0x01600000
+#define QE_CR_SUBBLOCK_RAND		0x01c00000
+#define QE_CR_SUBBLOCK_TIMER		0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_QMC		0x02
+#define QE_CR_PROTOCOL_UART		0x04
+#define QE_CR_PROTOCOL_ATM_POS		0x0A
+#define QE_CR_PROTOCOL_ETHERNET		0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE		0x00010000
+#define QE_BRGC_DIVISOR_SHIFT	1
+#define QE_BRGC_DIVISOR_MAX	0xFFF
+#define QE_BRGC_DIV16		1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS	0x80
+#define QE_GTCFR1_STP2	0x20
+#define QE_GTCFR1_RST2	0x10
+#define QE_GTCFR1_GM2	0x08
+#define QE_GTCFR1_GM1	0x04
+#define QE_GTCFR1_STP1	0x02
+#define QE_GTCFR1_RST1	0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1	0x02000000
+#define QE_SDSR_BER2	0x01000000
+
+#define QE_SDMR_GLB_1_MSK	0x80000000
+#define QE_SDMR_ADR_SEL		0x20000000
+#define QE_SDMR_BER1_MSK	0x02000000
+#define QE_SDMR_BER2_MSK	0x01000000
+#define QE_SDMR_EB1_MSK		0x00800000
+#define QE_SDMR_ER1_MSK		0x00080000
+#define QE_SDMR_ER2_MSK		0x00040000
+#define QE_SDMR_CEN_MASK	0x0000E000
+#define QE_SDMR_SBER_1		0x00000200
+#define QE_SDMR_SBER_2		0x00000200
+#define QE_SDMR_EB1_PR_MASK	0x000000C0
+#define QE_SDMR_ER1_PR		0x00000008
+
+#define QE_SDMR_CEN_SHIFT	13
+#define QE_SDMR_EB1_PR_SHIFT	6
+
+#define QE_SDTM_MSNUM_SHIFT	24
+
+#define QE_SDEBCR_BA_MASK	0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
+
+/* UPC */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX	0x02
+#define UCC_GUEMR_MODE_FAST_RX	0x02
+#define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_TX	0x01
+#define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
+					   must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+	__be16 rbase;		/* RX BD base address */
+	__be16 tbase;		/* TX BD base address */
+	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
+	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
+	__be16 mrblr;		/* Rx buffer length */
+	__be32 rstate;		/* Rx internal state */
+	__be32 rptr;		/* Rx internal data pointer */
+	__be16 rbptr;		/* rb BD Pointer */
+	__be16 rcount;		/* Rx internal byte count */
+	__be32 rtemp;		/* Rx temp */
+	__be32 tstate;		/* Tx internal state */
+	__be32 tptr;		/* Tx internal data pointer */
+	__be16 tbptr;		/* Tx BD pointer */
+	__be16 tcount;		/* Tx byte count */
+	__be32 ttemp;		/* Tx temp */
+	__be32 rcrc;		/* temp receive CRC */
+	__be32 tcrc;		/* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
+#define UCC_SLOW_GUMR_H_REVD		0x00002000
+#define UCC_SLOW_GUMR_H_TRX		0x00001000
+#define UCC_SLOW_GUMR_H_TTX		0x00000800
+#define UCC_SLOW_GUMR_H_CDP		0x00000400
+#define UCC_SLOW_GUMR_H_CTSP		0x00000200
+#define UCC_SLOW_GUMR_H_CDS		0x00000100
+#define UCC_SLOW_GUMR_H_CTSS		0x00000080
+#define UCC_SLOW_GUMR_H_TFL		0x00000040
+#define UCC_SLOW_GUMR_H_RFW		0x00000020
+#define UCC_SLOW_GUMR_H_TXSY		0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM		0x00000002
+#define UCC_SLOW_GUMR_H_RSYN		0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI		0x10000000
+#define UCC_SLOW_GUMR_L_RINV		0x02000000
+#define UCC_SLOW_GUMR_L_TINV		0x01000000
+#define UCC_SLOW_GUMR_L_TEND		0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
+#define UCC_SLOW_GUMR_L_ENR		0x00000020
+#define UCC_SLOW_GUMR_L_ENT		0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI	0x20000000
+#define UCC_FAST_GUMR_TRX	0x10000000
+#define UCC_FAST_GUMR_TTX	0x08000000
+#define UCC_FAST_GUMR_CDP	0x04000000
+#define UCC_FAST_GUMR_CTSP	0x02000000
+#define UCC_FAST_GUMR_CDS	0x01000000
+#define UCC_FAST_GUMR_CTSS	0x00800000
+#define UCC_FAST_GUMR_TXSY	0x00020000
+#define UCC_FAST_GUMR_RSYN	0x00010000
+#define UCC_FAST_GUMR_RTSM	0x00002000
+#define UCC_FAST_GUMR_REVD	0x00000400
+#define UCC_FAST_GUMR_ENR	0x00000020
+#define UCC_FAST_GUMR_ENT	0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB	0x0200
+#define UCC_UART_UCCE_IDLE	0x0100
+#define UCC_UART_UCCE_GRA	0x0080
+#define UCC_UART_UCCE_BRKE	0x0040
+#define UCC_UART_UCCE_BRKS	0x0020
+#define UCC_UART_UCCE_CCR	0x0008
+#define UCC_UART_UCCE_BSY	0x0004
+#define UCC_UART_UCCE_TX	0x0002
+#define UCC_UART_UCCE_RX	0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR	0x1000
+#define UCC_HDLC_UCCE_GLT	0x0800
+#define UCC_HDLC_UCCE_IDLE	0x0100
+#define UCC_HDLC_UCCE_BRKE	0x0040
+#define UCC_HDLC_UCCE_BRKS	0x0020
+#define UCC_HDLC_UCCE_TXE	0x0010
+#define UCC_HDLC_UCCE_RXF	0x0008
+#define UCC_HDLC_UCCE_BSY	0x0004
+#define UCC_HDLC_UCCE_TXB	0x0002
+#define UCC_HDLC_UCCE_RXB	0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA	0x0080
+#define UCC_BISYNC_UCCE_TXE	0x0010
+#define UCC_BISYNC_UCCE_RCH	0x0008
+#define UCC_BISYNC_UCCE_BSY	0x0004
+#define UCC_BISYNC_UCCE_TXB	0x0002
+#define UCC_BISYNC_UCCE_RXB	0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC		0x8000
+#define UCC_UART_UPSMR_SL		0x4000
+#define UCC_UART_UPSMR_CL_MASK		0x3000
+#define UCC_UART_UPSMR_CL_8		0x3000
+#define UCC_UART_UPSMR_CL_7		0x2000
+#define UCC_UART_UPSMR_CL_6		0x1000
+#define UCC_UART_UPSMR_CL_5		0x0000
+#define UCC_UART_UPSMR_UM_MASK		0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL	0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
+#define UCC_UART_UPSMR_FRZ		0x0200
+#define UCC_UART_UPSMR_RZS		0x0100
+#define UCC_UART_UPSMR_SYN		0x0080
+#define UCC_UART_UPSMR_DRT		0x0040
+#define UCC_UART_UPSMR_PEN		0x0010
+#define UCC_UART_UPSMR_RPM_MASK		0x000c
+#define UCC_UART_UPSMR_RPM_ODD		0x0000
+#define UCC_UART_UPSMR_RPM_LOW		0x0004
+#define UCC_UART_UPSMR_RPM_EVEN		0x0008
+#define UCC_UART_UPSMR_RPM_HIGH		0x000C
+#define UCC_UART_UPSMR_TPM_MASK		0x0003
+#define UCC_UART_UPSMR_TPM_ODD		0x0000
+#define UCC_UART_UPSMR_TPM_LOW		0x0001
+#define UCC_UART_UPSMR_TPM_EVEN		0x0002
+#define UCC_UART_UPSMR_TPM_HIGH		0x0003
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD	0x8000
+#define UCC_FAST_TOD	0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL		0x20
+#define UCC_BMR_BO_BE		0x10
+#define UCC_BMR_CETM		0x04
+#define UCC_BMR_DTB		0x02
+#define UCC_BMR_BDB		0x01
+
+/* Function code masks */
+#define FC_GBL				0x20
+#define FC_DTB_LCL			0x02
+#define UCC_FAST_FUNCTION_CODE_GBL	0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
new file mode 100644
index 000000000000..56a7745ca343
--- /dev/null
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS	6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W			0x00000001
+#define QE_IC_SPREADMODE_GRP_X			0x00000002
+#define QE_IC_SPREADMODE_GRP_Y			0x00000004
+#define QE_IC_SPREADMODE_GRP_Z			0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
+
+#define QE_IC_LOW_SIGNAL			0x00000100
+#define QE_IC_HIGH_SIGNAL			0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
+	QE_IC_GRP_X,		/* QE interrupt controller group X */
+	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
+	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
+	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
+	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags,
+		void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+		void (*high_handler)(unsigned int irq, struct irq_desc *desc));
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+struct qe_ic;
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+
+static inline void qe_ic_cascade_low_ipic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_high_mpic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq;
+
+	cascade_irq = qe_ic_get_high_irq(qe_ic);
+	if (cascade_irq == NO_IRQ)
+		cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
new file mode 100644
index 000000000000..c6d1ab650778
--- /dev/null
+++ b/arch/powerpc/include/asm/reg.h
@@ -0,0 +1,788 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifndef _ASM_POWERPC_REG_H
+#define _ASM_POWERPC_REG_H
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/cputable.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_8xx */
+
+#define MSR_SF_LG	63              /* Enable 64 bit mode */
+#define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
+#define MSR_HV_LG 	60              /* Hypervisor state */
+#define MSR_VEC_LG	25	        /* Enable AltiVec */
+#define MSR_VSX_LG	23		/* Enable VSX */
+#define MSR_POW_LG	18		/* Enable Power Management */
+#define MSR_WE_LG	18		/* Wait State Enable */
+#define MSR_TGPR_LG	17		/* TLB Update registers in use */
+#define MSR_CE_LG	17		/* Critical Interrupt Enable */
+#define MSR_ILE_LG	16		/* Interrupt Little Endian */
+#define MSR_EE_LG	15		/* External Interrupt Enable */
+#define MSR_PR_LG	14		/* Problem State / Privilege Level */
+#define MSR_FP_LG	13		/* Floating Point enable */
+#define MSR_ME_LG	12		/* Machine Check Enable */
+#define MSR_FE0_LG	11		/* Floating Exception mode 0 */
+#define MSR_SE_LG	10		/* Single Step */
+#define MSR_BE_LG	9		/* Branch Trace */
+#define MSR_DE_LG	9 		/* Debug Exception Enable */
+#define MSR_FE1_LG	8		/* Floating Exception mode 1 */
+#define MSR_IP_LG	6		/* Exception prefix 0x000/0xFFF */
+#define MSR_IR_LG	5 		/* Instruction Relocate */
+#define MSR_DR_LG	4 		/* Data Relocate */
+#define MSR_PE_LG	3		/* Protection Enable */
+#define MSR_PX_LG	2		/* Protection Exclusive Mode */
+#define MSR_PMM_LG	2		/* Performance monitor */
+#define MSR_RI_LG	1		/* Recoverable Exception */
+#define MSR_LE_LG	0 		/* Little Endian */
+
+#ifdef __ASSEMBLY__
+#define __MASK(X)	(1<<(X))
+#else
+#define __MASK(X)	(1UL<<(X))
+#endif
+
+#ifdef CONFIG_PPC64
+#define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
+#define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
+#define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
+#else
+/* so tests for these bits fail on 32-bit */
+#define MSR_SF		0
+#define MSR_ISF		0
+#define MSR_HV		0
+#endif
+
+#define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
+#define MSR_VSX		__MASK(MSR_VSX_LG)	/* Enable VSX */
+#define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
+#define MSR_WE		__MASK(MSR_WE_LG)	/* Wait State Enable */
+#define MSR_TGPR	__MASK(MSR_TGPR_LG)	/* TLB Update registers in use */
+#define MSR_CE		__MASK(MSR_CE_LG)	/* Critical Interrupt Enable */
+#define MSR_ILE		__MASK(MSR_ILE_LG)	/* Interrupt Little Endian */
+#define MSR_EE		__MASK(MSR_EE_LG)	/* External Interrupt Enable */
+#define MSR_PR		__MASK(MSR_PR_LG)	/* Problem State / Privilege Level */
+#define MSR_FP		__MASK(MSR_FP_LG)	/* Floating Point enable */
+#define MSR_ME		__MASK(MSR_ME_LG)	/* Machine Check Enable */
+#define MSR_FE0		__MASK(MSR_FE0_LG)	/* Floating Exception mode 0 */
+#define MSR_SE		__MASK(MSR_SE_LG)	/* Single Step */
+#define MSR_BE		__MASK(MSR_BE_LG)	/* Branch Trace */
+#define MSR_DE		__MASK(MSR_DE_LG)	/* Debug Exception Enable */
+#define MSR_FE1		__MASK(MSR_FE1_LG)	/* Floating Exception mode 1 */
+#define MSR_IP		__MASK(MSR_IP_LG)	/* Exception prefix 0x000/0xFFF */
+#define MSR_IR		__MASK(MSR_IR_LG)	/* Instruction Relocate */
+#define MSR_DR		__MASK(MSR_DR_LG)	/* Data Relocate */
+#define MSR_PE		__MASK(MSR_PE_LG)	/* Protection Enable */
+#define MSR_PX		__MASK(MSR_PX_LG)	/* Protection Exclusive Mode */
+#ifndef MSR_PMM
+#define MSR_PMM		__MASK(MSR_PMM_LG)	/* Performance monitor */
+#endif
+#define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
+#define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
+
+#ifdef CONFIG_PPC64
+#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
+#define MSR_KERNEL      MSR_ | MSR_SF
+
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_SF
+
+#else /* 32-bit */
+/* Default MSR for kernel mode. */
+#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+#endif
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX	0x80000000	/* FPU exception summary */
+#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
+#define FPSCR_VX	0x20000000	/* Invalid operation summary */
+#define FPSCR_OX	0x10000000	/* Overflow exception summary */
+#define FPSCR_UX	0x08000000	/* Underflow exception summary */
+#define FPSCR_ZX	0x04000000	/* Zero-divide exception summary */
+#define FPSCR_XX	0x02000000	/* Inexact exception summary */
+#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
+#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
+#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
+#define FPSCR_FR	0x00040000	/* Fraction rounded */
+#define FPSCR_FI	0x00020000	/* Fraction inexact */
+#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
+#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
+#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
+#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
+#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
+#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
+#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
+#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
+#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
+#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
+#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
+#define FPSCR_RN	0x00000003	/* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR	0x009	/* Count Register */
+#define SPRN_DSCR	0x11
+#define SPRN_CTRLF	0x088
+#define SPRN_CTRLT	0x098
+#define   CTRL_CT	0xc0000000	/* current thread */
+#define   CTRL_CT0	0x80000000	/* thread 0 */
+#define   CTRL_CT1	0x40000000	/* thread 1 */
+#define   CTRL_TE	0x00c00000	/* thread enable */
+#define   CTRL_RUNLATCH	0x1
+#define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
+#define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABR2	0x13D	/* e300 */
+#define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
+#define   DABRX_USER	(1UL << 0)
+#define   DABRX_KERNEL	(1UL << 1)
+#define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
+#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define   DSISR_NOHPTE		0x40000000	/* no translation found */
+#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
+#define   DSISR_ISSTORE		0x02000000	/* access was a store */
+#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
+#define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
+#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR	0x134	/* Scaled PURR */
+#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_LPCR	0x13E	/* LPAR Control Register */
+#define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L	0x239	/* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U	0x238	/* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L	0x23B	/* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U	0x23A	/* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L	0x23D	/* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U	0x23C	/* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L	0x23F	/* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U	0x23E	/* Data BAT 7 Upper Register */
+
+#define SPRN_DEC	0x016		/* Decrement Register */
+#define SPRN_DER	0x095		/* Debug Enable Regsiter */
+#define DER_RSTE	0x40000000	/* Reset Interrupt */
+#define DER_CHSTPE	0x20000000	/* Check Stop */
+#define DER_MCIE	0x10000000	/* Machine Check Interrupt */
+#define DER_EXTIE	0x02000000	/* External Interrupt */
+#define DER_ALIE	0x01000000	/* Alignment Interrupt */
+#define DER_PRIE	0x00800000	/* Program Interrupt */
+#define DER_FPUVIE	0x00400000	/* FP Unavailable Interrupt */
+#define DER_DECIE	0x00200000	/* Decrementer Interrupt */
+#define DER_SYSIE	0x00040000	/* System Call Interrupt */
+#define DER_TRE		0x00020000	/* Trace Interrupt */
+#define DER_SEIE	0x00004000	/* FP SW Emulation Interrupt */
+#define DER_ITLBMSE	0x00002000	/* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE	0x00001000	/* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE	0x00000800	/* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE	0x00000400	/* Imp. Spec. Data TLB Error */
+#define DER_LBRKE	0x00000008	/* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE	0x00000004	/* Instruction Breakpoint Interrupt */
+#define DER_EBRKE	0x00000002	/* External Breakpoint Interrupt */
+#define DER_DPIE	0x00000001	/* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS	0x3D0		/* Data TLB Miss Register */
+#define SPRN_EAR	0x11A		/* External Address Register */
+#define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
+#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
+#define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
+#define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
+#define HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
+#define HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
+#define HID0_SBCLK	(1<<27)
+#define HID0_EICE	(1<<26)
+#define HID0_TBEN	(1<<26)		/* Timebase enable - 745x */
+#define HID0_ECLK	(1<<25)
+#define HID0_PAR	(1<<24)
+#define HID0_STEN	(1<<24)		/* Software table search enable - 745x */
+#define HID0_HIGH_BAT	(1<<23)		/* Enable high BATs - 7455 */
+#define HID0_DOZE	(1<<23)
+#define HID0_NAP	(1<<22)
+#define HID0_SLEEP	(1<<21)
+#define HID0_DPM	(1<<20)
+#define HID0_BHTCLR	(1<<18)		/* Clear branch history table - 7450 */
+#define HID0_XAEN	(1<<17)		/* Extended addressing enable - 7450 */
+#define HID0_NHR	(1<<16)		/* Not hard reset (software bit-7450)*/
+#define HID0_ICE	(1<<15)		/* Instruction Cache Enable */
+#define HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
+#define HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
+#define HID0_DCI	(1<<10)		/* Data Cache Invalidate */
+#define HID0_SPD	(1<<9)		/* Speculative disable */
+#define HID0_DAPUEN	(1<<8)		/* Debug APU enable */
+#define HID0_SGE	(1<<7)		/* Store Gathering Enable */
+#define HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
+#define HID0_DCFA	(1<<6)		/* Data Cache Flush Assist */
+#define HID0_LRSTK	(1<<4)		/* Link register stack - 745x */
+#define HID0_BTIC	(1<<5)		/* Branch Target Instr Cache Enable */
+#define HID0_ABE	(1<<3)		/* Address Broadcast Enable */
+#define HID0_FOLD	(1<<3)		/* Branch Folding enable - 745x */
+#define HID0_BHTE	(1<<2)		/* Branch History Table Enable */
+#define HID0_BTCD	(1<<1)		/* Branch target cache disable */
+#define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
+#define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
+#define HID1_DFS	(1<<22)		/* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0	(1<<16)		/* 7450 PLL_CFG[0] */
+#define HID1_PC1	(1<<15)		/* 7450 PLL_CFG[1] */
+#define HID1_PC2	(1<<14)		/* 7450 PLL_CFG[2] */
+#define HID1_PC3	(1<<13)		/* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE	(1<<11)		/* 7450 ABE for sync, eieio */
+#define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
+#define HID1_PS		(1<<16)		/* 750FX PLL selection */
+#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_IABR2	0x3FA		/* 83xx */
+#define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
+#define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID5	0x3F6		/* 970 HID5 */
+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L	0x211		/* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U	0x210		/* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L	0x213		/* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U	0x212		/* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L	0x215		/* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U	0x214		/* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L	0x217		/* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U	0x216		/* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L	0x231		/* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U	0x230		/* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L	0x233		/* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U	0x232		/* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L	0x235		/* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U	0x234		/* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L	0x237		/* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
+#define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE	0x08000000	/* enable icache parity errs */
+#define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
+#define ICTRL_EICP	0x00000100	/* enable icache par. check */
+#define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
+#define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
+#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2	0x3f8
+#define L2CR_L2E		0x80000000	/* L2 enable */
+#define L2CR_L2PE		0x40000000	/* L2 parity enable */
+#define L2CR_L2SIZ_MASK		0x30000000	/* L2 size mask */
+#define L2CR_L2SIZ_256KB	0x10000000	/* L2 size 256KB */
+#define L2CR_L2SIZ_512KB	0x20000000	/* L2 size 512KB */
+#define L2CR_L2SIZ_1MB		0x30000000	/* L2 size 1MB */
+#define L2CR_L2CLK_MASK		0x0e000000	/* L2 clock mask */
+#define L2CR_L2CLK_DISABLED	0x00000000	/* L2 clock disabled */
+#define L2CR_L2CLK_DIV1		0x02000000	/* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5	0x04000000	/* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2		0x08000000	/* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5	0x0a000000	/* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3		0x0c000000	/* L2 clock / 3 */
+#define L2CR_L2RAM_MASK		0x01800000	/* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW		0x00000000	/* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE		0x01000000	/* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW	0x01800000	/* L2 RAM pipelined latewr */
+#define L2CR_L2DO		0x00400000	/* L2 data only */
+#define L2CR_L2I		0x00200000	/* L2 global invalidate */
+#define L2CR_L2CTL		0x00100000	/* L2 RAM control */
+#define L2CR_L2WT		0x00080000	/* L2 write-through */
+#define L2CR_L2TS		0x00040000	/* L2 test support */
+#define L2CR_L2OH_MASK		0x00030000	/* L2 output hold mask */
+#define L2CR_L2OH_0_5		0x00000000	/* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0		0x00010000	/* L2 output hold 1.0 ns */
+#define L2CR_L2SL		0x00008000	/* L2 DLL slow */
+#define L2CR_L2DF		0x00004000	/* L2 differential clock */
+#define L2CR_L2BYP		0x00002000	/* L2 DLL bypass */
+#define L2CR_L2IP		0x00000001	/* L2 GI in progress */
+#define L2CR_L2IO_745x		0x00100000	/* L2 instr. only (745x) */
+#define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
+#define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
+#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
+#define L3CR_L3E		0x80000000	/* L3 enable */
+#define L3CR_L3PE		0x40000000	/* L3 data parity enable */
+#define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
+#define L3CR_L3SIZ		0x10000000	/* L3 size */
+#define L3CR_L3CLKEN		0x08000000	/* L3 clock enable */
+#define L3CR_L3RES		0x04000000	/* L3 special reserved bit */
+#define L3CR_L3CLKDIV		0x03800000	/* L3 clock divisor */
+#define L3CR_L3IO		0x00400000	/* L3 instruction only */
+#define L3CR_L3SPO		0x00040000	/* L3 sample point override */
+#define L3CR_L3CKSP		0x00030000	/* L3 clock sample point */
+#define L3CR_L3PSP		0x0000e000	/* L3 P-clock sample point */
+#define L3CR_L3REP		0x00001000	/* L3 replacement algorithm */
+#define L3CR_L3HWF		0x00000800	/* L3 hardware flush */
+#define L3CR_L3I		0x00000400	/* L3 global invalidate */
+#define L3CR_L3RT		0x00000300	/* L3 SRAM type */
+#define L3CR_L3NIRCA		0x00000080	/* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO		0x00000040	/* L3 data only mode */
+#define L3CR_PMEN		0x00000004	/* L3 private memory enable */
+#define L3CR_PMSIZ		0x00000001	/* L3 private memory size */
+
+#define SPRN_MSSCR0	0x3f6	/* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0	0x3f7	/* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR	0x3f8	/* Load/Store control register */
+#define SPRN_LDSTDB	0x3f4	/* */
+#define SPRN_LR		0x008	/* Link Register */
+#ifndef SPRN_PIR
+#define SPRN_PIR	0x3FF	/* Processor Identification Register */
+#endif
+#define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
+#define SPRN_PVR	0x11F	/* Processor Version Register */
+#define SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
+#define SPRN_SDR1	0x019	/* MMU Hash Base Register */
+#define SPRN_ASR	0x118   /* Address Space Register */
+#define SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
+#define SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
+#define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
+#define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
+#define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
+#define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
+#define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
+#define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
+#define   SRR1_WAKERESET	0x00380000 /* System reset */
+#define   SRR1_WAKESYSERR	0x00300000 /* System error */
+#define   SRR1_WAKEEE		0x00200000 /* External interrupt */
+#define   SRR1_WAKEMT		0x00280000 /* mtctrl */
+#define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
+#define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
+#define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
+
+#define SPRN_TBCTL	0x35f	/* PA6T Timebase control register */
+#define   TBCTL_FREEZE		0x0000000000000000ull /* Freeze all tbs */
+#define   TBCTL_RESTART		0x0000000100000000ull /* Restart all tbs */
+#define   TBCTL_UPDATE_UPPER	0x0000000200000000ull /* Set upper 32 bits */
+#define   TBCTL_UPDATE_LOWER	0x0000000300000000ull /* Set lower 32 bits */
+
+#ifndef SPRN_SVR
+#define SPRN_SVR	0x11E	/* System Version Register */
+#endif
+#define SPRN_THRM1	0x3FC		/* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN	(1 << 31)
+#define THRM1_TIV	(1 << 30)
+#define THRM1_THRES(x)	((x&0x7f)<<23)
+#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM1_TID	(1<<2)
+#define THRM1_TIE	(1<<1)
+#define THRM1_V		(1<<0)
+#define SPRN_THRM2	0x3FD		/* Thermal Management Register 2 */
+#define SPRN_THRM3	0x3FE		/* Thermal Management Register 3 */
+#define THRM3_E		(1<<0)
+#define SPRN_TLBMISS	0x3D4		/* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
+#define SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
+#define SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
+#define SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
+#define SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
+#define SPRN_XER	0x001	/* Fixed Point Exception Register */
+
+#define SPRN_SCOMC	0x114	/* SCOM Access Control */
+#define SPRN_SCOMD	0x115	/* SCOM Access DATA */
+
+/* Performance monitor SPRs */
+#ifdef CONFIG_PPC64
+#define SPRN_MMCR0	795
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
+#define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
+#define   MMCR0_FCTA	0x00000004UL /* freeze counters in tags active mode */
+#define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
+#define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
+#define SPRN_MMCR1	798
+#define SPRN_MMCRA	0x312
+#define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
+#define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
+#define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
+#define   MMCRA_SLOT_SHIFT	24
+#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
+#define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
+#define   POWER6_MMCRA_THRM	0x00000020UL
+#define   POWER6_MMCRA_OTHER	0x0000000EUL
+#define SPRN_PMC1	787
+#define SPRN_PMC2	788
+#define SPRN_PMC3	789
+#define SPRN_PMC4	790
+#define SPRN_PMC5	791
+#define SPRN_PMC6	792
+#define SPRN_PMC7	793
+#define SPRN_PMC8	794
+#define SPRN_SIAR	780
+#define SPRN_SDAR	781
+
+#define SPRN_PA6T_MMCR0 795
+#define   PA6T_MMCR0_EN0	0x0000000000000001UL
+#define   PA6T_MMCR0_EN1	0x0000000000000002UL
+#define   PA6T_MMCR0_EN2	0x0000000000000004UL
+#define   PA6T_MMCR0_EN3	0x0000000000000008UL
+#define   PA6T_MMCR0_EN4	0x0000000000000010UL
+#define   PA6T_MMCR0_EN5	0x0000000000000020UL
+#define   PA6T_MMCR0_SUPEN	0x0000000000000040UL
+#define   PA6T_MMCR0_PREN	0x0000000000000080UL
+#define   PA6T_MMCR0_HYPEN	0x0000000000000100UL
+#define   PA6T_MMCR0_FCM0	0x0000000000000200UL
+#define   PA6T_MMCR0_FCM1	0x0000000000000400UL
+#define   PA6T_MMCR0_INTGEN	0x0000000000000800UL
+#define   PA6T_MMCR0_INTEN0	0x0000000000001000UL
+#define   PA6T_MMCR0_INTEN1	0x0000000000002000UL
+#define   PA6T_MMCR0_INTEN2	0x0000000000004000UL
+#define   PA6T_MMCR0_INTEN3	0x0000000000008000UL
+#define   PA6T_MMCR0_INTEN4	0x0000000000010000UL
+#define   PA6T_MMCR0_INTEN5	0x0000000000020000UL
+#define   PA6T_MMCR0_DISCNT	0x0000000000040000UL
+#define   PA6T_MMCR0_UOP	0x0000000000080000UL
+#define   PA6T_MMCR0_TRG	0x0000000000100000UL
+#define   PA6T_MMCR0_TRGEN	0x0000000000200000UL
+#define   PA6T_MMCR0_TRGREG	0x0000000001600000UL
+#define   PA6T_MMCR0_SIARLOG	0x0000000002000000UL
+#define   PA6T_MMCR0_SDARLOG	0x0000000004000000UL
+#define   PA6T_MMCR0_PROEN	0x0000000008000000UL
+#define   PA6T_MMCR0_PROLOG	0x0000000010000000UL
+#define   PA6T_MMCR0_DAMEN2	0x0000000020000000UL
+#define   PA6T_MMCR0_DAMEN3	0x0000000040000000UL
+#define   PA6T_MMCR0_DAMEN4	0x0000000080000000UL
+#define   PA6T_MMCR0_DAMEN5	0x0000000100000000UL
+#define   PA6T_MMCR0_DAMSEL2	0x0000000200000000UL
+#define   PA6T_MMCR0_DAMSEL3	0x0000000400000000UL
+#define   PA6T_MMCR0_DAMSEL4	0x0000000800000000UL
+#define   PA6T_MMCR0_DAMSEL5	0x0000001000000000UL
+#define   PA6T_MMCR0_HANDDIS	0x0000002000000000UL
+#define   PA6T_MMCR0_PCTEN	0x0000004000000000UL
+#define   PA6T_MMCR0_SOCEN	0x0000008000000000UL
+#define   PA6T_MMCR0_SOCMOD	0x0000010000000000UL
+
+#define SPRN_PA6T_MMCR1 798
+#define   PA6T_MMCR1_ES2	0x00000000000000ffUL
+#define   PA6T_MMCR1_ES3	0x000000000000ff00UL
+#define   PA6T_MMCR1_ES4	0x0000000000ff0000UL
+#define   PA6T_MMCR1_ES5	0x00000000ff000000UL
+
+#define SPRN_PA6T_UPMC0 771	/* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772	/* ... */
+#define SPRN_PA6T_UPMC2 773
+#define SPRN_PA6T_UPMC3 774
+#define SPRN_PA6T_UPMC4 775
+#define SPRN_PA6T_UPMC5 776
+#define SPRN_PA6T_UMMCR0 779	/* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR	780	/* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782	/* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER	785	/* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0	787
+#define SPRN_PA6T_PMC1	788
+#define SPRN_PA6T_PMC2	789
+#define SPRN_PA6T_PMC3	790
+#define SPRN_PA6T_PMC4	791
+#define SPRN_PA6T_PMC5	792
+#define SPRN_PA6T_TSR0	793	/* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1	794	/* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2	799	/* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3	784	/* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER	981	/* Icache Error Register */
+#define SPRN_PA6T_DER	982	/* Dcache Error Register */
+#define SPRN_PA6T_BER	862	/* BIU Error Address Register */
+#define SPRN_PA6T_MER	849	/* MMU Error Register */
+
+#define SPRN_PA6T_IMA0	880	/* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1	881	/* ... */
+#define SPRN_PA6T_IMA2	882
+#define SPRN_PA6T_IMA3	883
+#define SPRN_PA6T_IMA4	884
+#define SPRN_PA6T_IMA5	885
+#define SPRN_PA6T_IMA6	886
+#define SPRN_PA6T_IMA7	887
+#define SPRN_PA6T_IMA8	888
+#define SPRN_PA6T_IMA9	889
+#define SPRN_PA6T_BTCR	978	/* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT	979	/* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR	1019	/* Power Counter Control Register */
+#define SPRN_BKMK	1020	/* Cell Bookmark Register */
+#define SPRN_PA6T_RPCCR	1021	/* Retire PC Trace Control Register */
+
+
+#else /* 32-bit */
+#define SPRN_MMCR0	952	/* Monitor Mode Control Register 0 */
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCnCE	0x00004000UL /* count enable for all but PMC 1*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMC1SEL	0x00001fc0UL /* PMC 1 Event */
+#define   MMCR0_PMC2SEL	0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1	956
+#define   MMCR1_PMC3SEL	0xf8000000UL /* PMC 3 Event */
+#define   MMCR1_PMC4SEL	0x07c00000UL /* PMC 4 Event */
+#define   MMCR1_PMC5SEL	0x003e0000UL /* PMC 5 Event */
+#define   MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2	944
+#define SPRN_PMC1	953	/* Performance Counter Register 1 */
+#define SPRN_PMC2	954	/* Performance Counter Register 2 */
+#define SPRN_PMC3	957	/* Performance Counter Register 3 */
+#define SPRN_PMC4	958	/* Performance Counter Register 4 */
+#define SPRN_PMC5	945	/* Performance Counter Register 5 */
+#define SPRN_PMC6	946	/* Performance Counter Register 6 */
+
+#define SPRN_SIAR	955	/* Sampled Instruction Address Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES	(1 << 7)
+#define MMCR0_PMC1_ICACHEMISS	(5 << 7)
+#define MMCR0_PMC1_DTLB		(6 << 7)
+#define MMCR0_PMC2_DCACHEMISS	0x6
+#define MMCR0_PMC2_CYCLES	0x1
+#define MMCR0_PMC2_ITLB		0x7
+#define MMCR0_PMC2_LOADMISSTIME	0x5
+#endif
+
+/*
+ * An mtfsf instruction with the L bit set. On CPUs that support this a
+ * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
+ *
+ * Until binutils gets the new form of mtfsf, hardwire the instruction.
+ */
+#ifdef CONFIG_PPC64
+#define MTFSF_L(REG) \
+	.long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
+#else
+#define MTFSF_L(REG)	mtfsf	0xff, (REG)
+#endif
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
+#define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
+
+#define __is_processor(pv)	(PVR_VER(mfspr(SPRN_PVR)) == (pv))
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr)	(((pvr) >> 20) & 0xFFF)	/* Family field */
+#define PVR_MEM(pvr)	(((pvr) >> 16) & 0xF)	/* Member field */
+#define PVR_CORE(pvr)	(((pvr) >> 12) & 0xF)	/* Core field */
+#define PVR_CFG(pvr)	(((pvr) >>  8) & 0xF)	/* Configuration field */
+#define PVR_MAJ(pvr)	(((pvr) >>  4) & 0xF)	/* Major revision field */
+#define PVR_MIN(pvr)	(((pvr) >>  0) & 0xF)	/* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA	0x00200000
+#define PVR_403GB	0x00200100
+#define PVR_403GC	0x00200200
+#define PVR_403GCX	0x00201400
+#define PVR_405GP	0x40110000
+#define PVR_STB03XXX	0x40310000
+#define PVR_NP405H	0x41410000
+#define PVR_NP405L	0x41610000
+#define PVR_601		0x00010000
+#define PVR_602		0x00050000
+#define PVR_603		0x00030000
+#define PVR_603e	0x00060000
+#define PVR_603ev	0x00070000
+#define PVR_603r	0x00071000
+#define PVR_604		0x00040000
+#define PVR_604e	0x00090000
+#define PVR_604r	0x000A0000
+#define PVR_620		0x00140000
+#define PVR_740		0x00080000
+#define PVR_750		PVR_740
+#define PVR_740P	0x10080000
+#define PVR_750P	PVR_740P
+#define PVR_7400	0x000C0000
+#define PVR_7410	0x800C0000
+#define PVR_7450	0x80000000
+#define PVR_8540	0x80200000
+#define PVR_8560	0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821		0x00500000
+#define PVR_823		PVR_821
+#define PVR_850		PVR_821
+#define PVR_860		PVR_821
+#define PVR_8240	0x00810100
+#define PVR_8245	0x80811014
+#define PVR_8260	PVR_8240
+
+/* 64-bit processors */
+/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
+#define PV_NORTHSTAR	0x0033
+#define PV_PULSAR	0x0034
+#define PV_POWER4	0x0035
+#define PV_ICESTAR	0x0036
+#define PV_SSTAR	0x0037
+#define PV_POWER4p	0x0038
+#define PV_970		0x0039
+#define PV_POWER5	0x003A
+#define PV_POWER5p	0x003B
+#define PV_970FX	0x003C
+#define PV_630		0x0040
+#define PV_630p	0x0041
+#define PV_970MP	0x0044
+#define PV_970GX	0x0045
+#define PV_BE		0x0070
+#define PV_PA6T		0x0090
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr()		({unsigned long rval; \
+			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#ifdef CONFIG_PPC64
+#define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
+				     : : "r" (v))
+#define mtmsrd(v)	__mtmsrd((v), 0)
+#define mtmsr(v)	mtmsrd(v)
+#else
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+#endif
+
+#define mfspr(rn)	({unsigned long rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				: "=r" (rval)); rval;})
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#ifdef __powerpc64__
+#ifdef CONFIG_PPC_CELL
+#define mftb()		({unsigned long rval;				\
+			asm volatile(					\
+				"90:	mftb %0;\n"			\
+				"97:	cmpwi %0,0;\n"			\
+				"	beq- 90b;\n"			\
+				"99:\n"					\
+				".section __ftr_fixup,\"a\"\n"		\
+				".align 3\n"				\
+				"98:\n"					\
+				"	.llong %1\n"			\
+				"	.llong %1\n"			\
+				"	.llong 97b-98b\n"		\
+				"	.llong 99b-98b\n"		\
+				"	.llong 0\n"			\
+				"	.llong 0\n"			\
+				".previous"				\
+			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
+#else
+#define mftb()		({unsigned long rval;	\
+			asm volatile("mftb %0" : "=r" (rval)); rval;})
+#endif /* !CONFIG_PPC_CELL */
+
+#else /* __powerpc64__ */
+
+#define mftbl()		({unsigned long rval;	\
+			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu()		({unsigned long rval;	\
+			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#endif /* !__powerpc64__ */
+
+#define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
+#define mttbu(v)	asm volatile("mttbu %0":: "r"(v))
+
+#ifdef CONFIG_PPC32
+#define mfsrin(v)	({unsigned int rval; \
+			asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+					rval;})
+#endif
+
+#define proc_trap()	asm volatile("trap")
+
+#ifdef CONFIG_PPC64
+
+extern void ppc64_runlatch_on(void);
+extern void ppc64_runlatch_off(void);
+
+extern unsigned long scom970_read(unsigned int address);
+extern void scom970_write(unsigned int address, unsigned long value);
+
+#else
+#define ppc64_runlatch_on()
+#define ppc64_runlatch_off()
+
+#endif /* CONFIG_PPC64 */
+
+#define __get_SP()	({unsigned long sp; \
+			asm volatile("mr %0,1": "=r" (sp)); sp;})
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 000000000000..e8ea346b21d3
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
new file mode 100644
index 000000000000..be980f4ee495
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -0,0 +1,501 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification.  Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well.  Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_BOOKE_H__
+#define __ASM_POWERPC_REG_BOOKE_H__
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
+#define MSR_SPE		(1<<25)	/* Enable SPE */
+#define MSR_DWE		(1<<10)	/* Debug Wait Enable */
+#define MSR_UBLE	(1<<10)	/* BTB lock enable (e500) */
+#define MSR_IS		MSR_IR	/* Instruction Space */
+#define MSR_DS		MSR_DR	/* Data Space */
+#define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
+#define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R	0x107	/* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W	0x114	/* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
+#define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
+#define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
+#define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
+#define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3	0x193	/* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4	0x194	/* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5	0x195	/* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6	0x196	/* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7	0x197	/* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8	0x198	/* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9	0x199	/* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10	0x19A	/* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11	0x19B	/* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12	0x19C	/* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
+#define SPRN_L1CFG0	0x203	/* L1 Cache Configure Register 0 */
+#define SPRN_L1CFG1	0x204	/* L1 Cache Configure Register 1 */
+#define SPRN_ATB	0x20E	/* Alternate Time Base */
+#define SPRN_ATBL	0x20E	/* Alternate Time Base Lower */
+#define SPRN_ATBU	0x20F	/* Alternate Time Base Upper */
+#define SPRN_IVOR32	0x210	/* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33	0x211	/* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34	0x212	/* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR	0x23C	/* Machine Check Status Register */
+#define SPRN_MCAR	0x23D	/* Machine Check Address Register */
+#define SPRN_DSRR0	0x23E	/* Debug Save and Restore Register 0 */
+#define SPRN_DSRR1	0x23F	/* Debug Save and Restore Register 1 */
+#define SPRN_SPRG8	0x25C	/* Special Purpose Register General 8 */
+#define SPRN_SPRG9	0x25D	/* Special Purpose Register General 9 */
+#define SPRN_L1CSR2	0x25E	/* L1 Cache Control and Status Register 2 */
+#define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
+#define SPRN_MAS1	0x271	/* MMU Assist Register 1 */
+#define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
+#define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
+#define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
+#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
+#define SPRN_PID1	0x279	/* Process ID Register 1 */
+#define SPRN_PID2	0x27A	/* Process ID Register 2 */
+#define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
+#define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_EPR	0x2BE	/* External Proxy Register */
+#define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
+#define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
+#define SPRN_MAS7	0x3B0	/* MMU Assist Register 7 */
+#define SPRN_MMUCR	0x3B2	/* MMU Control Register */
+#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
+#define SPRN_EPLC	0x3B3	/* External Process ID Load Context */
+#define SPRN_EPSC	0x3B4	/* External Process ID Store Context */
+#define SPRN_SGR	0x3B9	/* Storage Guarded Register */
+#define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
+#define SPRN_SLER	0x3BB	/* Little-endian real mode */
+#define SPRN_SU0R	0x3BC	/* "User 0" real mode (40x) */
+#define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
+#define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
+#define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
+#define SPRN_BUCSR	0x3F5	/* Branch Unit Control and Status */
+#define SPRN_L2CSR0	0x3F9	/* L2 Data Cache Control and Status Register 0 */
+#define SPRN_L2CSR1	0x3FA	/* L2 Data Cache Control and Status Register 1 */
+#define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
+#define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define SPRN_SVR	0x3FF	/* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID	0x030	/* Process ID */
+#define SPRN_PID0	SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0	0x03A	/* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	0x03B	/* Critical Save and Restore Register 1 */
+#define SPRN_DEAR	0x03D	/* Data Error Address Register */
+#define SPRN_ESR	0x03E	/* Exception Syndrome Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
+#define SPRN_DBSR	0x130	/* Debug Status Register */
+#define SPRN_DBCR0	0x134	/* Debug Control Register 0 */
+#define SPRN_DBCR1	0x135	/* Debug Control Register 1 */
+#define SPRN_IAC1	0x138	/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x139	/* Instruction Address Compare 2 */
+#define SPRN_DAC1	0x13C	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x13D	/* Data Address Compare 2 */
+#define SPRN_TSR	0x150	/* Timer Status Register */
+#define SPRN_TCR	0x154	/* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID	0x3B1	/* Process ID */
+#define SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */		
+#define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
+#define SPRN_DEAR	0x3D5	/* Data Error Address Register */
+#define SPRN_TSR	0x3D8	/* Timer Status Register */
+#define SPRN_TCR	0x3DA	/* Timer Control Register */
+#define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
+#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
+#define SPRN_DBSR	0x3F0	/* Debug Status Register */		
+#define SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
+#define SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
+#define	CCR1_TCS	0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#define MCSR_MCS	0x80000000 /* Machine Check Summary */
+#define MCSR_IB		0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB	0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB	0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP	0x08000000 /* TLB Parity Error */
+#define MCSR_ICP	0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP	0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
+
+#ifdef CONFIG_E500
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
+#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
+
+/* e500 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
+			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
+			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
+			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+#endif
+#ifdef CONFIG_E200
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
+#define MCSR_CPERR 	0x10000000UL /* Cache Parity Error */
+#define MCSR_EXCP_ERR 	0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
+					fetch for an exception handler */
+#define MCSR_BUS_IRERR 	0x00000010UL /* Read Bus Error on instruction fetch*/
+#define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
+#define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
+					store or cache line push */
+
+/* e200 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
+			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
+			MCSR_BUS_WRERR)
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC		0x08000000	/* Instruction Completion */
+#define DBSR_BT		0x04000000	/* Branch Taken */
+#define DBSR_IRPT	0x02000000	/* Exception Debug Event */
+#define DBSR_TIE	0x01000000	/* Trap Instruction Event */
+#define DBSR_IAC1	0x00800000	/* Instr Address Compare 1 Event */
+#define DBSR_IAC2	0x00400000	/* Instr Address Compare 2 Event */
+#define DBSR_IAC3	0x00200000	/* Instr Address Compare 3 Event */
+#define DBSR_IAC4	0x00100000	/* Instr Address Compare 4 Event */
+#define DBSR_DAC1R	0x00080000	/* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W	0x00040000	/* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R	0x00020000	/* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W	0x00010000	/* Data Addr Compare 2 Write Event */
+#define DBSR_RET	0x00008000	/* Return Debug Event */
+#define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC		0x80000000	/* Instruction Completion */
+#define DBSR_BT		0x40000000	/* Branch taken */
+#define DBSR_IRPT	0x20000000	/* Exception Debug Event */
+#define DBSR_TIE	0x10000000	/* Trap Instruction debug Event */
+#define DBSR_IAC1	0x04000000	/* Instruction Address Compare 1 Event */
+#define DBSR_IAC2	0x02000000	/* Instruction Address Compare 2 Event */
+#define DBSR_IAC3	0x00080000	/* Instruction Address Compare 3 Event */
+#define DBSR_IAC4	0x00040000	/* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R	0x01000000	/* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W	0x00800000	/* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R	0x00400000	/* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W	0x00200000	/* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI		0x80000000	/* Machine Check - Instruction */
+#define ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
+#define ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
+#define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
+#define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define ESR_PIL		0x08000000	/* Program Exception - Illegal */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
+#define ESR_PTR		0x02000000	/* Program Exception - Trap */
+#define ESR_FP		0x01000000	/* Floating Point Operation */
+#define ESR_DST		0x00800000	/* Storage Exception - Data miss */
+#define ESR_DIZ		0x00400000	/* Storage Exception - Zone fault */
+#define ESR_ST		0x00800000	/* Store Operation */
+#define ESR_DLK		0x00200000	/* Data Cache Locking */
+#define ESR_ILK		0x00100000	/* Instr. Cache Locking */
+#define ESR_PUO		0x00040000	/* Unimplemented Operation exception */
+#define ESR_BO		0x00020000	/* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#if defined(CONFIG_40x)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_IC	0x08000000	/* Instruction Completion */
+#define DBCR0_ICMP	DBCR0_IC
+#define DBCR0_BT	0x04000000	/* Branch Taken */
+#define DBCR0_BRT	DBCR0_BT
+#define DBCR0_EDE	0x02000000	/* Exception Debug Event */
+#define DBCR0_IRPT	DBCR0_EDE
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_IA1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC1	DBCR0_IA1
+#define DBCR0_IA2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC2	DBCR0_IA2
+#define DBCR0_IA12	0x00200000	/* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X	0x00100000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3	0x00080000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC3	DBCR0_IA3
+#define DBCR0_IA4	0x00040000	/* Instr Addr compare 4 enable */
+#define DBCR0_IAC4	DBCR0_IA4
+#define DBCR0_IA34	0x00020000	/* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X	0x00010000	/* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+#elif defined(CONFIG_BOOKE)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_ICMP	0x08000000	/* Instruction Completion */
+#define DBCR0_IC	DBCR0_ICMP
+#define DBCR0_BRT	0x04000000	/* Branch Taken */
+#define DBCR0_BT	DBCR0_BRT
+#define DBCR0_IRPT	0x02000000	/* Exception Debug Event */
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_TIE	DBCR0_TDE
+#define DBCR0_IAC1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC3	0x00200000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC4	0x00100000	/* Instr Addr compare 4 enable */
+#define DBCR0_DAC1R	0x00080000	/* DAC 1 Read enable */
+#define DBCR0_DAC1W	0x00040000	/* DAC 1 Write enable */
+#define DBCR0_DAC2R	0x00020000	/* DAC 2 Read enable */
+#define DBCR0_DAC2W	0x00010000	/* DAC 2 Write enable */
+#define DBCR0_RET	0x00008000	/* Return Debug Event */
+#define DBCR0_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
+#define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
+#define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
+#define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
+
+/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
+#endif
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
+#define TCR_WP_MASK	TCR_WP(3)
+#define WP_2_17		0		/* 2^17 clocks */
+#define WP_2_21		1		/* 2^21 clocks */
+#define WP_2_25		2		/* 2^25 clocks */
+#define WP_2_29		3		/* 2^29 clocks */
+#define TCR_WRC(x)	(((x)&0x3)<<28)	/* WDT Reset Control */
+#define TCR_WRC_MASK	TCR_WRC(3)
+#define WRC_NONE	0		/* No reset will occur */
+#define WRC_CORE	1		/* Core reset will occur */
+#define WRC_CHIP	2		/* Chip reset will occur */
+#define WRC_SYSTEM	3		/* System reset will occur */
+#define TCR_WIE		0x08000000	/* WDT Interrupt Enable */
+#define TCR_PIE		0x04000000	/* PIT Interrupt Enable */
+#define TCR_DIE		TCR_PIE		/* DEC Interrupt Enable */
+#define TCR_FP(x)	(((x)&0x3)<<24)	/* FIT Period */
+#define TCR_FP_MASK	TCR_FP(3)
+#define FP_2_9		0		/* 2^9 clocks */
+#define FP_2_13		1		/* 2^13 clocks */
+#define FP_2_17		2		/* 2^17 clocks */
+#define FP_2_21		3		/* 2^21 clocks */
+#define TCR_FIE		0x00800000	/* FIT Interrupt Enable */
+#define TCR_ARE		0x00400000	/* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW		0x80000000	/* Enable Next Watchdog */
+#define TSR_WIS		0x40000000	/* WDT Interrupt Status */
+#define TSR_WRS(x)	(((x)&0x3)<<28)	/* WDT Reset Status */
+#define WRS_NONE	0		/* No WDT reset occurred */
+#define WRS_CORE	1		/* WDT forced core reset */
+#define WRS_CHIP	2		/* WDT forced chip reset */
+#define WRS_SYSTEM	3		/* WDT forced system reset */
+#define TSR_PIS		0x08000000	/* PIT Interrupt Status */
+#define TSR_DIS		TSR_PIS		/* DEC Interrupt Status */
+#define TSR_FIS		0x04000000	/* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE	0		/* Noncacheable */
+#define DCCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY	0		/* Copy-back */
+#define DCWR_WRITE	1		/* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE	0		/* Noncacheable */
+#define ICCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
+#define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
+#define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
+#define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
+
+/* Bit definitions for L1CSR1. */
+#define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
+
+/* Bit definitions for L2CSR0. */
+#define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
+#define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP	0x1c000000	/* L2 I/D Way Partioning */
+#define L2CSR0_L2CM	0x03000000	/* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI	0x00200000	/* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO	0x00100000	/* L2 Cache Instruction Only */
+#define L2CSR0_L2DO	0x00010000	/* L2 Cache Data Only */
+#define L2CSR0_L2REP	0x00003000	/* L2 Line Replacement Algo */
+#define L2CSR0_L2FL	0x00000800	/* L2 Cache Flush */
+#define L2CSR0_L2LFC	0x00000400	/* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL	0		/* Speculative fetching allowed. */
+#define SGR_GUARDED	1		/* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series.  We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
+#define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
+#define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
+#define SPRN_TBHI	0x3DC	/* Time Base High */
+#define SPRN_TBLO	0x3DD	/* Time Base Low */
+#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
+#define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
+#define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
+#define SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM	DBCR0_EDM
+#define DBCR_IDM	DBCR0_IDM
+#define DBCR_RST(x)	(((x) & 0x3) << 28)
+#define DBCR_RST_NONE	0
+#define DBCR_RST_CORE	1
+#define DBCR_RST_CHIP	2
+#define DBCR_RST_SYSTEM	3
+#define DBCR_IC		DBCR0_IC	/* Instruction Completion Debug Evnt */
+#define DBCR_BT		DBCR0_BT	/* Branch Taken Debug Event */
+#define DBCR_EDE	DBCR0_EDE	/* Exception Debug Event */
+#define DBCR_TDE	DBCR0_TDE	/* TRAP Debug Event */
+#define DBCR_FER	0x00F80000	/* First Events Remaining Mask */
+#define DBCR_FT		0x00040000	/* Freeze Timers on Debug Event */
+#define DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
+#define DAC_BYTE	0
+#define DAC_HALF	1
+#define DAC_WORD	2
+#define DAC_QUAD	3
+#define DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
+#define DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
+#define DBCR_SED	0x00000020	/* Second Exception Debug Event */
+#define DBCR_STD	0x00000010	/* Second Trap Debug Event */
+#define DBCR_SIA	0x00000008	/* Second IAC Enable */
+#define DBCR_SDA	0x00000004	/* Second DAC Enable */
+#define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
new file mode 100644
index 000000000000..1e180a594589
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -0,0 +1,72 @@
+/*
+ * Contains register definitions for the Freescale Embedded Performance
+ * Monitor.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
+#define __ASM_POWERPC_REG_FSL_EMB_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn)	({unsigned int rval; \
+			asm volatile("mfpmr %0," __stringify(rn) \
+				     : "=r" (rval)); rval;})
+#define mtpmr(rn, v)	asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
+#define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
+#define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
+#define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
+#define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+
+#define PMLCA_FC	0x80000000	/* Freeze Counter */
+#define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
+#define PMLCA_FCU	0x20000000	/* Freeze in User */
+#define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
+#define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
+#define PMLCA_CE	0x04000000	/* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_SHIFT	16
+
+#define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
+#define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
+#define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
+#define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT	8
+
+#define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT	0
+
+#define PMRN_PMGC0	0x190	/* PM Global Control 0 */
+
+#define PMGC0_FAC	0x80000000	/* Freeze all Counters */
+#define PMGC0_PMIE	0x40000000	/* Interrupt Enable */
+#define PMGC0_FCECE	0x20000000	/* Freeze countes on
+					   Enabled Condition or
+					   Event */
+
+#define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
+#define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
+#define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
+#define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
+#define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
+#define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
+#define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
+
+
+#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/powerpc/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h
new file mode 100644
index 000000000000..172381769cfc
--- /dev/null
+++ b/arch/powerpc/include/asm/rheap.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm-ppc/rheap.h
+ *
+ * Header file for the implementation of a remote heap.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_PPC_RHEAP_H__
+#define __ASM_PPC_RHEAP_H__
+
+#include <linux/list.h>
+
+typedef struct _rh_block {
+	struct list_head list;
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_block_t;
+
+typedef struct _rh_info {
+	unsigned int alignment;
+	int max_blocks;
+	int empty_slots;
+	rh_block_t *block;
+	struct list_head empty_list;
+	struct list_head free_list;
+	struct list_head taken_list;
+	unsigned int flags;
+} rh_info_t;
+
+#define RHIF_STATIC_INFO	0x1
+#define RHIF_STATIC_BLOCK	0x2
+
+typedef struct _rh_stats {
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_stats_t;
+
+#define RHGS_FREE	0
+#define RHGS_TAKEN	1
+
+/* Create a remote heap dynamically */
+extern rh_info_t *rh_create(unsigned int alignment);
+
+/* Destroy a remote heap, created by rh_create() */
+extern void rh_destroy(rh_info_t * info);
+
+/* Initialize in place a remote info block */
+extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+		    rh_block_t * block);
+
+/* Attach a free region to manage */
+extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Detach a free region */
+extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Allocate the given size from the remote heap (with alignment) */
+extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
+		const char *owner);
+
+/* Allocate the given size from the remote heap */
+extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
+
+/* Allocate the given size from the given address */
+extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
+			    const char *owner);
+
+/* Free the allocated area */
+extern int rh_free(rh_info_t * info, unsigned long start);
+
+/* Get stats for debugging purposes */
+extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
+			rh_stats_t * stats);
+
+/* Simple dump of remote heap info */
+extern void rh_dump(rh_info_t * info);
+
+/* Set owner of taken block */
+extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
+
+#endif				/* __ASM_PPC_RHEAP_H__ */
diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h
new file mode 100644
index 000000000000..0018bf80cb25
--- /dev/null
+++ b/arch/powerpc/include/asm/rio.h
@@ -0,0 +1,18 @@
+/*
+ * RapidIO architecture support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ASM_PPC_RIO_H
+#define ASM_PPC_RIO_H
+
+extern void platform_rio_init(void);
+
+#endif				/* ASM_PPC_RIO_H */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
new file mode 100644
index 000000000000..8eaa7b28d9d0
--- /dev/null
+++ b/arch/powerpc/include/asm/rtas.h
@@ -0,0 +1,247 @@
+#ifndef _POWERPC_RTAS_H
+#define _POWERPC_RTAS_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+
+/*
+ * Definitions for talking to the RTAS on CHRP machines.
+ *
+ * Copyright (C) 2001 Peter Bergner
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define RTAS_UNKNOWN_SERVICE (-1)
+#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+
+/* Buffer size for ppc_rtas system call. */
+#define RTAS_RMOBUF_MAX (64 * 1024)
+
+/* RTAS return status codes */
+#define RTAS_NOT_SUSPENDABLE	-9004
+#define RTAS_BUSY		-2    /* RTAS Busy */
+#define RTAS_EXTENDED_DELAY_MIN	9900
+#define RTAS_EXTENDED_DELAY_MAX	9905
+
+/*
+ * In general to call RTAS use rtas_token("string") to lookup
+ * an RTAS token for the given string (e.g. "event-scan").
+ * To actually perform the call use
+ *    ret = rtas_call(token, n_in, n_out, ...)
+ * Where n_in is the number of input parameters and
+ *       n_out is the number of output parameters
+ *
+ * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
+ * will be returned as a token.  rtas_call() does look for this
+ * token and error out gracefully so rtas_call(rtas_token("str"), ...)
+ * may be safely used for one-shot calls to RTAS.
+ *
+ */
+
+typedef u32 rtas_arg_t;
+
+struct rtas_args {
+	u32 token;
+	u32 nargs;
+	u32 nret; 
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};  
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+/* RTAS event classes */
+#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
+#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
+#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
+#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+
+/* RTAS event severity */
+#define RTAS_SEVERITY_FATAL		0x5
+#define RTAS_SEVERITY_ERROR		0x4
+#define RTAS_SEVERITY_ERROR_SYNC	0x3
+#define RTAS_SEVERITY_WARNING		0x2
+#define RTAS_SEVERITY_EVENT		0x1
+#define RTAS_SEVERITY_NO_ERROR		0x0
+
+/* RTAS event disposition */
+#define RTAS_DISP_FULLY_RECOVERED	0x0
+#define RTAS_DISP_LIMITED_RECOVERY	0x1
+#define RTAS_DISP_NOT_RECOVERED		0x2
+
+/* RTAS event initiator */
+#define RTAS_INITIATOR_UNKNOWN		0x0
+#define RTAS_INITIATOR_CPU		0x1
+#define RTAS_INITIATOR_PCI		0x2
+#define RTAS_INITIATOR_ISA		0x3
+#define RTAS_INITIATOR_MEMORY		0x4
+#define RTAS_INITIATOR_POWERMGM		0x5
+
+/* RTAS event target */
+#define RTAS_TARGET_UNKNOWN		0x0
+#define RTAS_TARGET_CPU			0x1
+#define RTAS_TARGET_PCI			0x2
+#define RTAS_TARGET_ISA			0x3
+#define RTAS_TARGET_MEMORY		0x4
+#define RTAS_TARGET_POWERMGM		0x5
+
+/* RTAS event type */
+#define RTAS_TYPE_RETRY			0x01
+#define RTAS_TYPE_TCE_ERR		0x02
+#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
+#define RTAS_TYPE_TIMEOUT		0x04
+#define RTAS_TYPE_DATA_PARITY		0x05
+#define RTAS_TYPE_ADDR_PARITY		0x06
+#define RTAS_TYPE_CACHE_PARITY		0x07
+#define RTAS_TYPE_ADDR_INVALID		0x08
+#define RTAS_TYPE_ECC_UNCORR		0x09
+#define RTAS_TYPE_ECC_CORR		0x0a
+#define RTAS_TYPE_EPOW			0x40
+#define RTAS_TYPE_PLATFORM		0xE0
+#define RTAS_TYPE_IO			0xE1
+#define RTAS_TYPE_INFO			0xE2
+#define RTAS_TYPE_DEALLOC		0xE3
+#define RTAS_TYPE_DUMP			0xE4
+/* I don't add PowerMGM events right now, this is a different topic */ 
+#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
+#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
+#define RTAS_TYPE_PMGM_LID_OPEN		0x62
+#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
+#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
+#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
+#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
+#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
+#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
+#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
+#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
+#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
+#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
+#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
+#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
+#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
+#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
+#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
+
+struct rtas_error_log {
+	unsigned long version:8;		/* Architectural version */
+	unsigned long severity:3;		/* Severity level of error */
+	unsigned long disposition:2;		/* Degree of recovery */
+	unsigned long extended:1;		/* extended log present? */
+	unsigned long /* reserved */ :2;	/* Reserved for future use */
+	unsigned long initiator:4;		/* Initiator of event */
+	unsigned long target:4;			/* Target of failed operation */
+	unsigned long type:8;			/* General event or error*/
+	unsigned long extended_log_length:32;	/* length in bytes */
+	unsigned char buffer[1];
+};
+
+/*
+ * This can be set by the rtas_flash module so that it can get called
+ * as the absolutely last thing before the kernel terminates.
+ */
+extern void (*rtas_flash_term_hook)(int);
+
+extern struct rtas_t rtas;
+
+extern void enter_rtas(unsigned long);
+extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
+extern int rtas_call(int token, int, int, int *, ...);
+extern void rtas_restart(char *cmd);
+extern void rtas_power_off(void);
+extern void rtas_halt(void);
+extern void rtas_os_term(char *str);
+extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_power_level(int powerdomain, int *level);
+extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
+extern void rtas_progress(char *s, unsigned short hex);
+extern void rtas_initialize(void);
+
+struct rtc_time;
+extern unsigned long rtas_get_boot_time(void);
+extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
+extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+
+extern unsigned int rtas_busy_delay_time(int status);
+extern unsigned int rtas_busy_delay(int status);
+
+extern int early_init_dt_scan_rtas(unsigned long node,
+		const char *uname, int depth, void *data);
+
+extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+
+/* Error types logged.  */
+#define ERR_FLAG_ALREADY_LOGGED	0x0
+#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+
+/* All the types and not flags */
+#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+
+#define RTAS_DEBUG KERN_DEBUG "RTAS: "
+ 
+#define RTAS_ERROR_LOG_MAX 2048
+
+/*
+ * Return the firmware-specified size of the error log buffer
+ *  for all rtas calls that require an error buffer argument.
+ *  This includes 'check-exception' and 'rtas-last-error'.
+ */
+extern int rtas_get_error_log_max(void);
+
+/* Event Scan Parameters */
+#define EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define SURVEILLANCE_TOKEN	9000
+#define LOG_NUMBER		64		/* must be a power of two */
+#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
+
+/* Some RTAS ops require a data buffer and that buffer must be < 4G.
+ * Rather than having a memory allocator, just use this buffer
+ * (get the lock first), make the RTAS call.  Copy the data instead
+ * of holding the buffer for long.
+ */
+
+#define RTAS_DATA_BUF_SIZE 4096
+extern spinlock_t rtas_data_buf_lock;
+extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
+
+/* RMO buffer reserved for user-space RTAS use */
+extern unsigned long rtas_rmo_buf;
+
+#define GLOBAL_INTERRUPT_QUEUE 9005
+
+/**
+ * rtas_config_addr - Format a busno, devfn and reg for RTAS.
+ * @busno: The bus number.
+ * @devfn: The device and function number as encoded by PCI_DEVFN().
+ * @reg: The register number.
+ *
+ * This function encodes the given busno, devfn and register number as
+ * required for RTAS calls that take a "config_addr" parameter.
+ * See PAPR requirement 7.3.4-1 for more info.
+ */
+static inline u32 rtas_config_addr(int busno, int devfn, int reg)
+{
+	return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
+			(devfn << 8) | (reg & 0xff);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h
new file mode 100644
index 000000000000..f5802926b6c0
--- /dev/null
+++ b/arch/powerpc/include/asm/rtc.h
@@ -0,0 +1,78 @@
+/*
+ * Real-time clock definitions and interfaces
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_POWERPC_RTC_H__
+#define __ASM_POWERPC_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time)
+		ppc_md.get_rtc_time(time);
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.set_rtc_time)
+		return ppc_md.set_rtc_time(time);
+	return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
new file mode 100644
index 000000000000..24cd9281ec37
--- /dev/null
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)					\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_rwsem((sem), #sem, &__key);	\
+	} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..fcf7d55afe45
--- /dev/null
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_SCATTERLIST_H
+#define _ASM_POWERPC_SCATTERLIST_H
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/dma.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	unsigned int length;
+
+	/* For TCE support */
+	dma_addr_t dma_address;
+	u32 dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef __powerpc64__
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif
+
+#ifdef __powerpc64__
+#define ISA_DMA_THRESHOLD	(~0UL)
+#endif
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h
new file mode 100644
index 000000000000..853765eb1f65
--- /dev/null
+++ b/arch/powerpc/include/asm/seccomp.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SECCOMP_H
+#define _ASM_POWERPC_SECCOMP_H
+
+#ifdef __KERNEL__
+#include <linux/thread_info.h>
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif	/* _ASM_POWERPC_SECCOMP_H */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
new file mode 100644
index 000000000000..916018e425c4
--- /dev/null
+++ b/arch/powerpc/include/asm/sections.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_SECTIONS_H
+#define _ASM_POWERPC_SECTIONS_H
+#ifdef __KERNEL__
+
+#include <asm-generic/sections.h>
+
+#ifdef __powerpc64__
+
+extern char _end[];
+
+static inline int in_kernel_text(unsigned long addr)
+{
+	if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
+		return 1;
+
+	return 0;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SECTIONS_H */
diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/asm/sembuf.h
new file mode 100644
index 000000000000..99a41938ae3d
--- /dev/null
+++ b/arch/powerpc/include/asm/sembuf.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_SEMBUF_H
+#define _ASM_POWERPC_SEMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The semid64_ds structure for PPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+#ifndef __powerpc64__
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_otime;	/* last semop time */
+#ifndef __powerpc64__
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SEMBUF_H */
diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h
new file mode 100644
index 000000000000..3e8589b43cb2
--- /dev/null
+++ b/arch/powerpc/include/asm/serial.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_SERIAL_H
+#define _ASM_POWERPC_SERIAL_H
+
+/*
+ * Serial ports are not listed here, because they are discovered
+ * through the device tree.
+ */
+
+/* Default baud base if not found in device-tree */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_PPC_UDBG_16550
+extern void find_legacy_serial_ports(void);
+#else
+#define find_legacy_serial_ports()	do { } while (0)
+#endif
+
+#endif /* _PPC64_SERIAL_H */
diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h
new file mode 100644
index 000000000000..279d03a1eec6
--- /dev/null
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright © 2008 Michael Neuling IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _ASM_POWERPC_SETJMP_H
+#define _ASM_POWERPC_SETJMP_H
+
+#define JMP_BUF_LEN    23
+
+extern long setjmp(long *);
+extern void longjmp(long *, long);
+
+#endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
new file mode 100644
index 000000000000..817fac0a0714
--- /dev/null
+++ b/arch/powerpc/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SETUP_H
+#define _ASM_POWERPC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h
new file mode 100644
index 000000000000..8efa39698b6c
--- /dev/null
+++ b/arch/powerpc/include/asm/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_POWERPC_SHMBUF_H
+#define _ASM_POWERPC_SHMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The shmid64_ds structure for PPC architecture.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+#ifndef __powerpc64__
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __powerpc64__
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __powerpc64__
+	unsigned long		__unused3;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __powerpc64__
+	unsigned long		__unused4;
+#endif
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused5;
+	unsigned long		__unused6;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SHMBUF_H */
diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h
new file mode 100644
index 000000000000..5cda42a6d39e
--- /dev/null
+++ b/arch/powerpc/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SHMPARAM_H
+#define _ASM_POWERPC_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif	/* _ASM_POWERPC_SHMPARAM_H */
diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..9c1f24fd5d11
--- /dev/null
+++ b/arch/powerpc/include/asm/sigcontext.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_POWERPC_SIGCONTEXT_H
+#define _ASM_POWERPC_SIGCONTEXT_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#ifdef __powerpc64__
+#include <asm/elf.h>
+#endif
+
+struct sigcontext {
+	unsigned long	_unused[4];
+	int		signal;
+#ifdef __powerpc64__
+	int		_pad0;
+#endif
+	unsigned long	handler;
+	unsigned long	oldmask;
+	struct pt_regs	__user *regs;
+#ifdef __powerpc64__
+	elf_gregset_t	gp_regs;
+	elf_fpregset_t	fp_regs;
+/*
+ * To maintain compatibility with current implementations the sigcontext is
+ * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
+ * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
+ * allows the array of vector registers to be quadword aligned independent of
+ * the alignment of the containing sigcontext or ucontext. It is the
+ * responsibility of the code setting the sigcontext to set this pointer to
+ * either NULL (if this processor does not support the VMX feature) or the
+ * address of the first quadword within the allocated (vmx_reserve) area.
+ *
+ * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with
+ * an array of 34 quadword entries (elf_vrregset_t).  The entries with
+ * indexes 0-31 contain the corresponding vector registers.  The entry with
+ * index 32 contains the vscr as the last word (offset 12) within the
+ * quadword.  This allows the vscr to be stored as either a quadword (since
+ * it must be copied via a vector register to/from storage) or as a word.
+ * The entry with index 33 contains the vrsave as the first word (offset 0)
+ * within the quadword.
+ *
+ * Part of the VSX data is stored here also by extending vmx_restore
+ * by an additional 32 double words.  Architecturally the layout of
+ * the VSR registers and how they overlap on top of the legacy FPR and
+ * VR registers is shown below:
+ *
+ *                    VSR doubleword 0               VSR doubleword 1
+ *           ----------------------------------------------------------------
+ *   VSR[0]  |             FPR[0]            |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[1]  |             FPR[1]            |                              |
+ *           ----------------------------------------------------------------
+ *           |              ...              |                              |
+ *           |              ...              |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[30] |             FPR[30]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[31] |             FPR[31]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[32] |                             VR[0]                            |
+ *           ----------------------------------------------------------------
+ *   VSR[33] |                             VR[1]                            |
+ *           ----------------------------------------------------------------
+ *           |                              ...                             |
+ *           |                              ...                             |
+ *           ----------------------------------------------------------------
+ *   VSR[62] |                             VR[30]                           |
+ *           ----------------------------------------------------------------
+ *   VSR[63] |                             VR[31]                           |
+ *           ----------------------------------------------------------------
+ *
+ * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
+ * is stored at the start of vmx_reserve.  vmx_reserve is extended for
+ * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
+ * registers and vscr/vrsave.
+ */
+	elf_vrreg_t	__user *v_regs;
+	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
+#endif
+};
+
+#endif /* _ASM_POWERPC_SIGCONTEXT_H */
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
new file mode 100644
index 000000000000..12f1bce037be
--- /dev/null
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_SIGINFO_H
+#define _ASM_POWERPC_SIGINFO_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+#    define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#    define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
+#endif
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#endif	/* _ASM_POWERPC_SIGINFO_H */
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
new file mode 100644
index 000000000000..a7360cdd99eb
--- /dev/null
+++ b/arch/powerpc/include/asm/signal.h
@@ -0,0 +1,150 @@
+#ifndef _ASM_POWERPC_SIGNAL_H
+#define _ASM_POWERPC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#ifdef __powerpc64__
+#define _NSIG_BPW	64
+#else
+#define _NSIG_BPW	32
+#endif
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000U
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+struct pt_regs;
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+#ifndef __powerpc64__
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+#endif /* ! __powerpc64__ */
+
+#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
new file mode 100644
index 000000000000..4d28e1e4521b
--- /dev/null
+++ b/arch/powerpc/include/asm/smp.h
@@ -0,0 +1,127 @@
+/* 
+ * smp.h: PowerPC-specific SMP code.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_SMP_H
+#define _ASM_POWERPC_SMP_H
+#ifdef __KERNEL__
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+#include <asm/percpu.h>
+
+extern int boot_cpuid;
+
+extern void cpu_die(void);
+
+#ifdef CONFIG_SMP
+
+extern void smp_send_debugger_break(int cpu);
+extern void smp_message_recv(int);
+
+DECLARE_PER_CPU(unsigned int, pvr);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(cpumask_t map);
+int generic_cpu_disable(void);
+int generic_cpu_enable(unsigned int cpu);
+void generic_cpu_die(unsigned int cpu);
+void generic_mach_cpu_die(void);
+#endif
+
+#ifdef CONFIG_PPC64
+#define raw_smp_processor_id()	(local_paca->paca_index)
+#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+#else
+/* 32-bit */
+extern int smp_hw_index[];
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
+#define set_hard_smp_processor_id(cpu, phys)\
+					(smp_hw_index[(cpu)] = (phys))
+#endif
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+extern int cpu_to_core_id(int cpu);
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION   0
+#define PPC_MSG_RESCHEDULE      1
+#define PPC_MSG_CALL_FUNC_SINGLE	2
+#define PPC_MSG_DEBUGGER_BREAK  3
+
+void smp_init_iSeries(void);
+void smp_init_pSeries(void);
+void smp_init_cell(void);
+void smp_init_celleb(void);
+void smp_setup_cpu_maps(void);
+void smp_setup_cpu_sibling_map(void);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
+#else
+/* for UP */
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_maps()
+
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64
+#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
+#define set_hard_smp_processor_id(CPU, VAL) \
+	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern void smp_release_cpus(void);
+
+#else
+/* 32-bit */
+#ifndef CONFIG_SMP
+extern int boot_cpuid_phys;
+#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
+#define set_hard_smp_processor_id(cpu, phys)
+#endif
+#endif
+
+extern int smt_enabled_at_boot;
+
+extern int smp_mpic_probe(void);
+extern void smp_mpic_setup_cpu(int cpu);
+extern void smp_generic_kick_cpu(int nr);
+
+extern void smp_generic_give_timebase(void);
+extern void smp_generic_take_timebase(void);
+
+extern struct smp_ops_t *smp_ops;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
new file mode 100644
index 000000000000..7ae2753da565
--- /dev/null
+++ b/arch/powerpc/include/asm/smu.h
@@ -0,0 +1,700 @@
+#ifndef _SMU_H
+#define _SMU_H
+
+/*
+ * Definitions for talking to the SMU chip in newer G5 PowerMacs
+ */
+#ifdef __KERNEL__
+#include <linux/list.h>
+#endif
+#include <linux/types.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * These commands are used to retrieve the sdb-partition-XX datas from
+ * the SMU. The length is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ *  - 0..1 : partition address
+ *  - 2    : a byte containing the partition ID
+ *  - 3    : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
+ */
+#define SMU_CMD_PARTITION_COMMAND		0x3e
+#define   SMU_CMD_PARTITION_LATEST		0x01
+#define   SMU_CMD_PARTITION_BASE		0x02
+#define   SMU_CMD_PARTITION_UPDATE		0x03
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
+ */
+#define SMU_CMD_FAN_COMMAND			0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND			0x6f
+#define   SMU_CMD_GET_BATTERY_INFO		0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND			0x8e
+#define   SMU_CMD_RTC_SET_PWRUP_TIMER		0x00 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_PWRUP_TIMER		0x01 /* o: 7 bytes date */
+#define   SMU_CMD_RTC_STOP_PWRUP_TIMER		0x02
+#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC		0x20 /* i: 1 byte (address?) */
+#define   SMU_CMD_RTC_SET_PRAM_AUTOINC		0x21 /* i: 1 byte (data?) */
+#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES 	0x22 /* i: 10 bytes */
+#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES 	0x23 /* i: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_BYTE		0x28 /* i: 1 bytes (address?) */
+#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES 	0x29 /* o: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES 	0x2a /* o: 10 bytes */
+#define	  SMU_CMD_RTC_SET_DATETIME		0x80 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_DATETIME		0x81 /* o: 7 bytes date */
+
+ /*
+  * i2c commands
+  *
+  * To issue an i2c command, first is to send a parameter block to the
+  * the SMU. This is a command of type 0x9a with 9 bytes of header
+  * eventually followed by data for a write:
+  *
+  * 0: bus number (from device-tree usually, SMU has lots of busses !)
+  * 1: transfer type/format (see below)
+  * 2: device address. For combined and combined4 type transfers, this
+  *    is the "write" version of the address (bit 0x01 cleared)
+  * 3: subaddress length (0..3)
+  * 4: subaddress byte 0 (or only byte for subaddress length 1)
+  * 5: subaddress byte 1
+  * 6: subaddress byte 2
+  * 7: combined address (device address for combined mode data phase)
+  * 8: data length
+  *
+  * The transfer types are the same good old Apple ones it seems,
+  * that is:
+  *   - 0x00: Simple transfer
+  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
+  *   - 0x02: Combined transfer (addr write + restart + data tx)
+  *
+  * This is then followed by actual data for a write.
+  *
+  * At this point, the OF driver seems to have a limitation on transfer
+  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+  * wether this is just an OF limit due to some temporary buffer size
+  * or if this is an SMU imposed limit. This driver has the same limitation
+  * for now as I use a 0x10 bytes temporary buffer as well
+  *
+  * Once that is completed, a response is expected from the SMU. This is
+  * obtained via a command of type 0x9a with a length of 1 byte containing
+  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+  * though I can't tell yet if this is actually necessary. Once this command
+  * is complete, at this point, all I can tell is what OF does. OF tests
+  * byte 0 of the reply:
+  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+  *   - on write, < 0 -> failure (immediate exit)
+  *   - else, OF just exists (without error, weird)
+  *
+  * So on read, there is this wait-for-busy thing when getting a 0xfc or
+  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+  * doing the above again until either the retries expire or the result
+  * is no longer 0xfe or 0xfc
+  *
+  * The Darwin I2C driver is less subtle though. On any non-success status
+  * from the response command, it waits 5ms and tries again up to 20 times,
+  * it doesn't differenciate between fatal errors or "busy" status.
+  *
+  * This driver provides an asynchronous paramblock based i2c command
+  * interface to be used either directly by low level code or by a higher
+  * level driver interfacing to the linux i2c layer. The current
+  * implementation of this relies on working timers & timer interrupts
+  * though, so be careful of calling context for now. This may be "fixed"
+  * in the future by adding a polling facility.
+  */
+#define SMU_CMD_I2C_COMMAND			0x9a
+          /* transfer types */
+#define   SMU_I2C_TRANSFER_SIMPLE	0x00
+#define   SMU_I2C_TRANSFER_STDSUB	0x01
+#define   SMU_I2C_TRANSFER_COMBINED	0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data length is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *    reply at data offset 6, 7 and 8.
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *    used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases. They seem to be:
+ *  x = processor mask
+ *  y = op. point index
+ *  z = processor freq. step index
+ * I haven't yet decyphered result codes
+ *
+ */
+#define SMU_CMD_POWER_COMMAND			0xaa
+#define   SMU_CMD_POWER_RESTART		       	"RESTART"
+#define   SMU_CMD_POWER_SHUTDOWN		"SHUTDOWN"
+#define   SMU_CMD_POWER_VOLTAGE_SLEW		"VSLEW"
+
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC			0xd8
+
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_MISC_df_COMMAND			0xdf
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ *   2: status [0x00, 0x01 or 0x02]
+ */
+#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT	0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ *   2: enable power switch? [0x00 or 0x01]
+ *   3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ *   NMI is enabled. Otherwise unknown.
+ */
+#define   SMU_CMD_MISC_df_NMI_OPTION		0x04
+
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ *   2-8: unknown (BCD coding)
+ */
+#define   SMU_CMD_MISC_df_DIMM_OFFSET		0x99
+
+
+/*
+ * Version info commands
+ *
+ * Parameters:
+ *   1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ *   Version value
+ */
+#define SMU_CMD_VERSION_COMMAND			0xea
+#define   SMU_VERSION_RUNNING			0x00
+#define   SMU_VERSION_BASE			0x01
+#define   SMU_VERSION_UPDATE			0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ *   none
+ *
+ * Result:
+ *   Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES			0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED			0x01
+#define SMU_SWITCH_AC_POWER			0x04
+#define SMU_SWITCH_POWER_SWITCH			0x08
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retrieve partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ *  byte 0: subcommand code (0x02)
+ *  byte 1: 0x04 (always, I don't know what it means, maybe the address
+ *                space to use or some other nicety. It's hard coded in OF)
+ *  byte 2..5: SMU address of the chunk (big endian 32 bits)
+ *  byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
+ */
+#define SMU_CMD_MISC_ee_COMMAND			0xee
+#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC	0x02
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ *   1: 0x03 (Meaning unknown)
+ */
+#define   SMU_CMD_MISC_ee_GET_WATTS		0x03
+
+#define   SMU_CMD_MISC_ee_LEDS_CTRL		0x04 /* i: 00 (00,01) [00] */
+#define   SMU_CMD_MISC_ee_GET_DATA		0x05 /* i: 00 , o: ?? */
+
+
+/*
+ * Power related commands
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND		0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+	SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
+	SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
+	SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
+	SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
+	SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
+	SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
+
+	/*
+	 * Get last shutdown cause
+	 *
+	 * Returns:
+	 *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+	 */
+	SMU_PWR_LAST_SHUTDOWN_CAUSE	= 0x07,
+
+	/*
+	 * Sets or gets server ID. Meaning or use is unknown.
+	 *
+	 * Parameters:
+	 *   2 (optional): Set server ID (1 byte)
+	 *
+	 * Returns:
+	 *   1 byte (server ID?)
+	 */
+	SMU_PWR_SERVER_ID		= 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+	SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
+	SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
+	SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
+	SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
+	SMU_PWR_WAKEUP_RING             = 0x10,
+};
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+	/* public */
+	u8			cmd;		/* command */
+	int			data_len;	/* data len */
+	int			reply_len;	/* reply len */
+	void			*data_buf;	/* data buffer */
+	void			*reply_buf;	/* reply buffer */
+	int			status;		/* command status */
+	void			(*done)(struct smu_cmd *cmd, void *misc);
+	void			*misc;
+
+	/* private */
+	struct list_head	link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+	struct smu_cmd	cmd;
+	u8	       	buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+			    unsigned int data_len,
+			    void (*done)(struct smu_cmd *cmd, void *misc),
+			    void *misc,
+			    ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
+
+/*
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+	smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
+ */
+extern int smu_init(void);
+extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
+extern void smu_shutdown(void);
+extern void smu_restart(void);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
+
+/*
+ * SMU command buffer absolute address, exported by pmac_setup,
+ * this is allocated very early during boot.
+ */
+extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+#define SMU_I2C_READ_MAX	0x1d
+#define SMU_I2C_WRITE_MAX	0x15
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+	u8	bus;		/* SMU bus ID (from device tree) */
+	u8	type;		/* i2c transfer type */
+	u8	devaddr;	/* device address (includes direction) */
+	u8	sublen;		/* subaddress length */
+	u8	subaddr[3];	/* subaddress */
+	u8	caddr;		/* combined address, filled by SMU driver */
+	u8	datalen;	/* length of transfer */
+	u8	data[SMU_I2C_READ_MAX];	/* data */
+};
+
+struct smu_i2c_cmd
+{
+	/* public */
+	struct smu_i2c_param	info;
+	void			(*done)(struct smu_i2c_cmd *cmd, void *misc);
+	void			*misc;
+	int			status; /* 1 = pending, 0 = ok, <0 = fail */
+
+	/* private */
+	struct smu_cmd		scmd;
+	int			read;
+	int			stage;
+	int			retries;
+	u8			pdata[32];
+	struct list_head	link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - SMU "sdb" partitions informations -
+ */
+
+
+/*
+ * Partition header format
+ */
+struct smu_sdbp_header {
+	__u8	id;
+	__u8	len;
+	__u8	version;
+	__u8	flags;
+};
+
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
+ */
+#define SMU_U16_MIX(x)	le16_to_cpu(x);
+#define SMU_U32_MIX(x)  ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
+
+/* This is the definition of the SMU sdb-partition-0x12 table (called
+ * CPU F/V/T operating points in Darwin). The definition for all those
+ * SMU tables should be moved to some separate file
+ */
+#define SMU_SDB_FVT_ID			0x12
+
+struct smu_sdbp_fvt {
+	__u32	sysclk;			/* Base SysClk frequency in Hz for
+					 * this operating point. Value need to
+					 * be unmixed with SMU_U32_MIX()
+					 */
+	__u8	pad;
+	__u8	maxtemp;		/* Max temp. supported by this
+					 * operating point
+					 */
+
+	__u16	volts[3];		/* CPU core voltage for the 3
+					 * PowerTune modes, a mode with
+					 * 0V = not supported. Value need
+					 * to be unmixed with SMU_U16_MIX()
+					 */
+};
+
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID		0x21
+
+struct smu_sdbp_cpuvcp {
+	__u16	volt_scale;		/* u4.12 fixed point */
+	__s16	volt_offset;		/* s4.12 fixed point */
+	__u16	curr_scale;		/* u4.12 fixed point */
+	__s16	curr_offset;		/* s4.12 fixed point */
+	__s32	power_quads[3];		/* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID		0x18
+
+struct smu_sdbp_cpudiode {
+	__u16	m_value;		/* u1.15 fixed point */
+	__s16	b_value;		/* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID		0x78
+
+struct smu_sdbp_slotspow {
+	__u16	pow_scale;		/* u4.12 fixed point */
+	__s16	pow_offset;		/* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID		0x25
+
+struct smu_sdbp_sensortree {
+	__u8	model_id;
+	__u8	unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID		0x17
+
+struct smu_sdbp_cpupiddata {
+	__u8	unknown1;
+	__u8	target_temp_delta;
+	__u8	unknown2;
+	__u8	history_len;
+	__s16	power_adj;
+	__u16	max_power;
+	__s32	gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID	0x05
+
+#ifdef __KERNEL__
+/*
+ * This returns the pointer to an SMU "sdb" partition data or NULL
+ * if not found. The data format is described below
+ */
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
+					unsigned int *size);
+
+/* Get "sdb" partition data from an SMU satellite */
+extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
+					int id, unsigned int *size);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ *  - sending SMU commands (default at open() time)
+ *  - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+	__u32		cmdtype;
+#define SMU_CMDTYPE_SMU			0	/* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS	1	/* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION	2	/* retrieve an sdb partition */
+
+	__u8		cmd;			/* SMU command byte */
+	__u8		pad[3];			/* padding */
+	__u32		data_len;		/* Length of data following */
+};
+
+struct smu_user_reply_hdr
+{
+	__u32		status;			/* Command status */
+	__u32		reply_len;		/* Length of data follwing */
+};
+
+#endif /*  _SMU_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
new file mode 100644
index 000000000000..f5a4e168e498
--- /dev/null
+++ b/arch/powerpc/include/asm/socket.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_SOCKET_H
+#define _ASM_POWERPC_SOCKET_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT	16
+#define SO_SNDLOWAT	17
+#define SO_RCVTIMEO	18
+#define SO_SNDTIMEO	19
+#define SO_PASSCRED	20
+#define SO_PEERCRED	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/asm/sockios.h
new file mode 100644
index 000000000000..55cef7675a31
--- /dev/null
+++ b/arch/powerpc/include/asm/sockios.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SOCKIOS_H
+#define _ASM_POWERPC_SOCKIOS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif	/* _ASM_POWERPC_SOCKIOS_H */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
new file mode 100644
index 000000000000..54a47ea2c3aa
--- /dev/null
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_SPARSEMEM_H
+#define _ASM_POWERPC_SPARSEMEM_H 1
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       24
+
+#define MAX_PHYSADDR_BITS       44
+#define MAX_PHYSMEM_BITS        44
+
+#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
+#ifdef CONFIG_NUMA
+extern int hot_add_scn_to_nid(unsigned long scn_addr);
+#else
+static inline int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+	return 0;
+}
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f56a843f4705
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -0,0 +1,295 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Simple spin lock operations.  
+ *
+ * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
+ *	Rework to support virtual processors
+ *
+ * Type of int is used as a full 64b word is not necessary.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+#include <linux/irqflags.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/hv_call.h>
+#endif
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+#define __raw_spin_is_locked(x)		((x)->slock != 0)
+
+#ifdef CONFIG_PPC64
+/* use 0x800000yy when locked, where yy == CPU number */
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
+#else
+#define LOCK_TOKEN	1
+#endif
+
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+#define CLEAR_IO_SYNC	(get_paca()->io_sync = 0)
+#define SYNC_IO		do {						\
+				if (unlikely(get_paca()->io_sync)) {	\
+					mb();				\
+					get_paca()->io_sync = 0;	\
+				}					\
+			} while (0)
+#else
+#define CLEAR_IO_SYNC
+#define SYNC_IO
+#endif
+
+/*
+ * This returns the old value in the lock, so we succeeded
+ * in getting the lock if the return value is 0.
+ */
+static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp, token;
+
+	token = LOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n\
+	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&lock->slock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	return __spin_trylock(lock) == 0;
+}
+
+/*
+ * On a system with shared processors (that is, where a physical
+ * processor is multiplexed between several virtual processors),
+ * there is no point spinning on a lock if the holder of the lock
+ * isn't currently scheduled on a physical processor.  Instead
+ * we detect this situation and ask the hypervisor to give the
+ * rest of our timeslice to the lock holder.
+ *
+ * So that we can tell which virtual processor is holding a lock,
+ * we put 0x80000000 | smp_processor_id() in the lock when it is
+ * held.  Conveniently, we have a word in the paca that holds this
+ * value.
+ */
+
+#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
+/* We only yield to the hypervisor if we are in shared processor mode */
+#define SHARED_PROCESSOR (get_lppaca()->shared_proc)
+extern void __spin_yield(raw_spinlock_t *lock);
+extern void __rw_yield(raw_rwlock_t *lock);
+#else /* SPLPAR || ISERIES */
+#define __spin_yield(x)	barrier()
+#define __rw_yield(x)	barrier()
+#define SHARED_PROCESSOR	0
+#endif
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+	}
+}
+
+static inline
+void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long flags_dis;
+
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		local_save_flags(flags_dis);
+		local_irq_restore(flags);
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+		local_irq_restore(flags_dis);
+	}
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	SYNC_IO;
+	__asm__ __volatile__("# __raw_spin_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	lock->slock = 0;
+}
+
+#ifdef CONFIG_PPC64
+extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
+#else
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+#endif
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+#define __raw_read_can_lock(rw)		((rw)->lock >= 0)
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#ifdef CONFIG_PPC64
+#define __DO_SIGN_EXTEND	"extsw	%0,%0\n"
+#define WRLOCK_TOKEN		LOCK_TOKEN	/* it's negative */
+#else
+#define __DO_SIGN_EXTEND
+#define WRLOCK_TOKEN		(-1)
+#endif
+
+/*
+ * This returns the old value in the lock + 1,
+ * so we got a read lock if the return value is > 0.
+ */
+static inline long __read_trylock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%1\n"
+	__DO_SIGN_EXTEND
+"	addic.		%0,%0,1\n\
+	ble-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (&rw->lock)
+	: "cr0", "xer", "memory");
+
+	return tmp;
+}
+
+/*
+ * This returns the old value in the lock,
+ * so we got the write lock if the return value is 0.
+ */
+static inline long __write_trylock(raw_rwlock_t *rw)
+{
+	long tmp, token;
+
+	token = WRLOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&rw->lock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__read_trylock(rw) > 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock < 0));
+		HMT_medium();
+	}
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__write_trylock(rw) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock != 0));
+		HMT_medium();
+	}
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	return __read_trylock(rw) > 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	return __write_trylock(rw) == 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"# read_unlock\n\t"
+	LWSYNC_ON_SMP
+"1:	lwarx		%0,0,%1\n\
+	addic		%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	__asm__ __volatile__("# write_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	rw->lock = 0;
+}
+
+#define _raw_spin_relax(lock)	__spin_yield(lock)
+#define _raw_read_relax(lock)	__rw_yield(lock)
+#define _raw_write_relax(lock)	__rw_yield(lock)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..74236c9f05b1
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H
+#define _ASM_POWERPC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile signed int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
new file mode 100644
index 000000000000..8b2eb044270a
--- /dev/null
+++ b/arch/powerpc/include/asm/spu.h
@@ -0,0 +1,732 @@
+/*
+ * SPU core / file system interface and HW structures
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_H
+#define _SPU_H
+#ifdef __KERNEL__
+
+#include <linux/workqueue.h>
+#include <linux/sysdev.h>
+
+#define LS_SIZE (256 * 1024)
+#define LS_ADDR_MASK (LS_SIZE - 1)
+
+#define MFC_PUT_CMD             0x20
+#define MFC_PUTS_CMD            0x28
+#define MFC_PUTR_CMD            0x30
+#define MFC_PUTF_CMD            0x22
+#define MFC_PUTB_CMD            0x21
+#define MFC_PUTFS_CMD           0x2A
+#define MFC_PUTBS_CMD           0x29
+#define MFC_PUTRF_CMD           0x32
+#define MFC_PUTRB_CMD           0x31
+#define MFC_PUTL_CMD            0x24
+#define MFC_PUTRL_CMD           0x34
+#define MFC_PUTLF_CMD           0x26
+#define MFC_PUTLB_CMD           0x25
+#define MFC_PUTRLF_CMD          0x36
+#define MFC_PUTRLB_CMD          0x35
+
+#define MFC_GET_CMD             0x40
+#define MFC_GETS_CMD            0x48
+#define MFC_GETF_CMD            0x42
+#define MFC_GETB_CMD            0x41
+#define MFC_GETFS_CMD           0x4A
+#define MFC_GETBS_CMD           0x49
+#define MFC_GETL_CMD            0x44
+#define MFC_GETLF_CMD           0x46
+#define MFC_GETLB_CMD           0x45
+
+#define MFC_SDCRT_CMD           0x80
+#define MFC_SDCRTST_CMD         0x81
+#define MFC_SDCRZ_CMD           0x89
+#define MFC_SDCRS_CMD           0x8D
+#define MFC_SDCRF_CMD           0x8F
+
+#define MFC_GETLLAR_CMD         0xD0
+#define MFC_PUTLLC_CMD          0xB4
+#define MFC_PUTLLUC_CMD         0xB0
+#define MFC_PUTQLLUC_CMD        0xB8
+#define MFC_SNDSIG_CMD          0xA0
+#define MFC_SNDSIGB_CMD         0xA1
+#define MFC_SNDSIGF_CMD         0xA2
+#define MFC_BARRIER_CMD         0xC0
+#define MFC_EIEIO_CMD           0xC8
+#define MFC_SYNC_CMD            0xCC
+
+#define MFC_MIN_DMA_SIZE_SHIFT  4       /* 16 bytes */
+#define MFC_MAX_DMA_SIZE_SHIFT  14      /* 16384 bytes */
+#define MFC_MIN_DMA_SIZE        (1 << MFC_MIN_DMA_SIZE_SHIFT)
+#define MFC_MAX_DMA_SIZE        (1 << MFC_MAX_DMA_SIZE_SHIFT)
+#define MFC_MIN_DMA_SIZE_MASK   (MFC_MIN_DMA_SIZE - 1)
+#define MFC_MAX_DMA_SIZE_MASK   (MFC_MAX_DMA_SIZE - 1)
+#define MFC_MIN_DMA_LIST_SIZE   0x0008  /*   8 bytes */
+#define MFC_MAX_DMA_LIST_SIZE   0x4000  /* 16K bytes */
+
+#define MFC_TAGID_TO_TAGMASK(tag_id)  (1 << (tag_id & 0x1F))
+
+/* Events for Channels 0-2 */
+#define MFC_DMA_TAG_STATUS_UPDATE_EVENT     0x00000001
+#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT  0x00000002
+#define MFC_DMA_QUEUE_AVAILABLE_EVENT       0x00000008
+#define MFC_SPU_MAILBOX_WRITTEN_EVENT       0x00000010
+#define MFC_DECREMENTER_EVENT               0x00000020
+#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT  0x00000040
+#define MFC_PU_MAILBOX_AVAILABLE_EVENT      0x00000080
+#define MFC_SIGNAL_2_EVENT                  0x00000100
+#define MFC_SIGNAL_1_EVENT                  0x00000200
+#define MFC_LLR_LOST_EVENT                  0x00000400
+#define MFC_PRIV_ATTN_EVENT                 0x00000800
+#define MFC_MULTI_SRC_EVENT                 0x00001000
+
+/* Flag indicating progress during context switch. */
+#define SPU_CONTEXT_SWITCH_PENDING	0UL
+#define SPU_CONTEXT_FAULT_PENDING	1UL
+
+struct spu_context;
+struct spu_runqueue;
+struct spu_lscsa;
+struct device_node;
+
+enum spu_utilization_state {
+	SPU_UTIL_USER,
+	SPU_UTIL_SYSTEM,
+	SPU_UTIL_IOWAIT,
+	SPU_UTIL_IDLE_LOADED,
+	SPU_UTIL_MAX
+};
+
+struct spu {
+	const char *name;
+	unsigned long local_store_phys;
+	u8 *local_store;
+	unsigned long problem_phys;
+	struct spu_problem __iomem *problem;
+	struct spu_priv2 __iomem *priv2;
+	struct list_head cbe_list;
+	struct list_head full_list;
+	enum { SPU_FREE, SPU_USED } alloc_state;
+	int number;
+	unsigned int irqs[3];
+	u32 node;
+	u64 flags;
+	u64 class_0_pending;
+	u64 class_0_dar;
+	u64 class_1_dar;
+	u64 class_1_dsisr;
+	size_t ls_size;
+	unsigned int slb_replace;
+	struct mm_struct *mm;
+	struct spu_context *ctx;
+	struct spu_runqueue *rq;
+	unsigned long long timestamp;
+	pid_t pid;
+	pid_t tgid;
+	spinlock_t register_lock;
+
+	void (* wbox_callback)(struct spu *spu);
+	void (* ibox_callback)(struct spu *spu);
+	void (* stop_callback)(struct spu *spu, int irq);
+	void (* mfc_callback)(struct spu *spu);
+
+	char irq_c0[8];
+	char irq_c1[8];
+	char irq_c2[8];
+
+	u64 spe_id;
+
+	void* pdata; /* platform private data */
+
+	/* of based platforms only */
+	struct device_node *devnode;
+
+	/* native only */
+	struct spu_priv1 __iomem *priv1;
+
+	/* beat only */
+	u64 shadow_int_mask_RW[3];
+
+	struct sys_device sysdev;
+
+	int has_mem_affinity;
+	struct list_head aff_list;
+
+	struct {
+		/* protected by interrupt reentrancy */
+		enum spu_utilization_state util_state;
+		unsigned long long tstamp;
+		unsigned long long times[SPU_UTIL_MAX];
+		unsigned long long vol_ctx_switch;
+		unsigned long long invol_ctx_switch;
+		unsigned long long min_flt;
+		unsigned long long maj_flt;
+		unsigned long long hash_flt;
+		unsigned long long slb_flt;
+		unsigned long long class2_intr;
+		unsigned long long libassist;
+	} stats;
+};
+
+struct cbe_spu_info {
+	struct mutex list_mutex;
+	struct list_head spus;
+	int n_spus;
+	int nr_active;
+	atomic_t busy_spus;
+	atomic_t reserved_spus;
+};
+
+extern struct cbe_spu_info cbe_spu_info[];
+
+void spu_init_channels(struct spu *spu);
+void spu_irq_setaffinity(struct spu *spu, int cpu);
+
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+		void *code, int code_size);
+
+#ifdef CONFIG_KEXEC
+void crash_register_spus(struct list_head *list);
+#else
+static inline void crash_register_spus(struct list_head *list)
+{
+}
+#endif
+
+extern void spu_invalidate_slbs(struct spu *spu);
+extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
+int spu_64k_pages_available(void);
+
+/* Calls from the memory management to the SPU */
+struct mm_struct;
+extern void spu_flush_all_slbs(struct mm_struct *mm);
+
+/* This interface allows a profiler (e.g., OProfile) to store a ref
+ * to spu context information that it creates.	This caching technique
+ * avoids the need to recreate this information after a save/restore operation.
+ *
+ * Assumes the caller has already incremented the ref count to
+ * profile_info; then spu_context_destroy must call kref_put
+ * on prof_info_kref.
+ */
+void spu_set_profile_private_kref(struct spu_context *ctx,
+				  struct kref *prof_info_kref,
+				  void ( * prof_info_release) (struct kref *kref));
+
+void *spu_get_profile_private_kref(struct spu_context *ctx);
+
+/* system callbacks from the SPU */
+struct spu_syscall_block {
+	u64 nr_ret;
+	u64 parm[6];
+};
+extern long spu_sys_callback(struct spu_syscall_block *s);
+
+/* syscalls implemented in spufs */
+struct file;
+struct spufs_calls {
+	long (*create_thread)(const char __user *name,
+					unsigned int flags, mode_t mode,
+					struct file *neighbor);
+	long (*spu_run)(struct file *filp, __u32 __user *unpc,
+						__u32 __user *ustatus);
+	int (*coredump_extra_notes_size)(void);
+	int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
+	void (*notify_spus_active)(void);
+	struct module *owner;
+};
+
+/* return status from spu_run, same as in libspe */
+#define SPE_EVENT_DMA_ALIGNMENT		0x0008	/*A DMA alignment error */
+#define SPE_EVENT_SPE_ERROR		0x0010	/*An illegal instruction error*/
+#define SPE_EVENT_SPE_DATA_SEGMENT	0x0020	/*A DMA segmentation error    */
+#define SPE_EVENT_SPE_DATA_STORAGE	0x0040	/*A DMA storage error */
+#define SPE_EVENT_INVALID_DMA		0x0800	/* Invalid MFC DMA */
+
+/*
+ * Flags for sys_spu_create.
+ */
+#define SPU_CREATE_EVENTS_ENABLED	0x0001
+#define SPU_CREATE_GANG			0x0002
+#define SPU_CREATE_NOSCHED		0x0004
+#define SPU_CREATE_ISOLATE		0x0008
+#define SPU_CREATE_AFFINITY_SPU		0x0010
+#define SPU_CREATE_AFFINITY_MEM		0x0020
+
+#define SPU_CREATE_FLAG_ALL		0x003f /* mask of all valid flags */
+
+
+int register_spu_syscalls(struct spufs_calls *calls);
+void unregister_spu_syscalls(struct spufs_calls *calls);
+
+int spu_add_sysdev_attr(struct sysdev_attribute *attr);
+void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
+
+int spu_add_sysdev_attr_group(struct attribute_group *attrs);
+void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+		unsigned long dsisr, unsigned *flt);
+
+/*
+ * Notifier blocks:
+ *
+ * oprofile can get notified when a context switch is performed
+ * on an spe. The notifer function that gets called is passed
+ * a pointer to the SPU structure as well as the object-id that
+ * identifies the binary running on that SPU now.
+ *
+ * For a context save, the object-id that is passed is zero,
+ * identifying that the kernel will run from that moment on.
+ *
+ * For a context restore, the object-id is the value written
+ * to object-id spufs file from user space and the notifer
+ * function can assume that spu->ctx is valid.
+ */
+struct notifier_block;
+int spu_switch_event_register(struct notifier_block * n);
+int spu_switch_event_unregister(struct notifier_block * n);
+
+extern void notify_spus_active(void);
+extern void do_notify_spus_active(void);
+
+/*
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
+ */
+
+union mfc_tag_size_class_cmd {
+	struct {
+		u16 mfc_size;
+		u16 mfc_tag;
+		u8  pad;
+		u8  mfc_rclassid;
+		u16 mfc_cmd;
+	} u;
+	struct {
+		u32 mfc_size_tag32;
+		u32 mfc_class_cmd32;
+	} by32;
+	u64 all64;
+};
+
+struct mfc_cq_sr {
+	u64 mfc_cq_data0_RW;
+	u64 mfc_cq_data1_RW;
+	u64 mfc_cq_data2_RW;
+	u64 mfc_cq_data3_RW;
+};
+
+struct spu_problem {
+#define MS_SYNC_PENDING         1L
+	u64 spc_mssync_RW;					/* 0x0000 */
+	u8  pad_0x0008_0x3000[0x3000 - 0x0008];
+
+	/* DMA Area */
+	u8  pad_0x3000_0x3004[0x4];				/* 0x3000 */
+	u32 mfc_lsa_W;						/* 0x3004 */
+	u64 mfc_ea_W;						/* 0x3008 */
+	union mfc_tag_size_class_cmd mfc_union_W;			/* 0x3010 */
+	u8  pad_0x3018_0x3104[0xec];				/* 0x3018 */
+	u32 dma_qstatus_R;					/* 0x3104 */
+	u8  pad_0x3108_0x3204[0xfc];				/* 0x3108 */
+	u32 dma_querytype_RW;					/* 0x3204 */
+	u8  pad_0x3208_0x321c[0x14];				/* 0x3208 */
+	u32 dma_querymask_RW;					/* 0x321c */
+	u8  pad_0x3220_0x322c[0xc];				/* 0x3220 */
+	u32 dma_tagstatus_R;					/* 0x322c */
+#define DMA_TAGSTATUS_INTR_ANY	1u
+#define DMA_TAGSTATUS_INTR_ALL	2u
+	u8  pad_0x3230_0x4000[0x4000 - 0x3230]; 		/* 0x3230 */
+
+	/* SPU Control Area */
+	u8  pad_0x4000_0x4004[0x4];				/* 0x4000 */
+	u32 pu_mb_R;						/* 0x4004 */
+	u8  pad_0x4008_0x400c[0x4];				/* 0x4008 */
+	u32 spu_mb_W;						/* 0x400c */
+	u8  pad_0x4010_0x4014[0x4];				/* 0x4010 */
+	u32 mb_stat_R;						/* 0x4014 */
+	u8  pad_0x4018_0x401c[0x4];				/* 0x4018 */
+	u32 spu_runcntl_RW;					/* 0x401c */
+#define SPU_RUNCNTL_STOP	0L
+#define SPU_RUNCNTL_RUNNABLE	1L
+#define SPU_RUNCNTL_ISOLATE	2L
+	u8  pad_0x4020_0x4024[0x4];				/* 0x4020 */
+	u32 spu_status_R;					/* 0x4024 */
+#define SPU_STOP_STATUS_SHIFT           16
+#define SPU_STATUS_STOPPED		0x0
+#define SPU_STATUS_RUNNING		0x1
+#define SPU_STATUS_STOPPED_BY_STOP	0x2
+#define SPU_STATUS_STOPPED_BY_HALT	0x4
+#define SPU_STATUS_WAITING_FOR_CHANNEL	0x8
+#define SPU_STATUS_SINGLE_STEP		0x10
+#define SPU_STATUS_INVALID_INSTR        0x20
+#define SPU_STATUS_INVALID_CH           0x40
+#define SPU_STATUS_ISOLATED_STATE       0x80
+#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200
+#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400
+	u8  pad_0x4028_0x402c[0x4];				/* 0x4028 */
+	u32 spu_spe_R;						/* 0x402c */
+	u8  pad_0x4030_0x4034[0x4];				/* 0x4030 */
+	u32 spu_npc_RW;						/* 0x4034 */
+	u8  pad_0x4038_0x14000[0x14000 - 0x4038];		/* 0x4038 */
+
+	/* Signal Notification Area */
+	u8  pad_0x14000_0x1400c[0xc];				/* 0x14000 */
+	u32 signal_notify1;					/* 0x1400c */
+	u8  pad_0x14010_0x1c00c[0x7ffc];			/* 0x14010 */
+	u32 signal_notify2;					/* 0x1c00c */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 2 State Area */
+struct spu_priv2 {
+	/* MFC Registers */
+	u8  pad_0x0000_0x1100[0x1100 - 0x0000]; 		/* 0x0000 */
+
+	/* SLB Management Registers */
+	u8  pad_0x1100_0x1108[0x8];				/* 0x1100 */
+	u64 slb_index_W;					/* 0x1108 */
+#define SLB_INDEX_MASK				0x7L
+	u64 slb_esid_RW;					/* 0x1110 */
+	u64 slb_vsid_RW;					/* 0x1118 */
+#define SLB_VSID_SUPERVISOR_STATE	(0x1ull << 11)
+#define SLB_VSID_SUPERVISOR_STATE_MASK	(0x1ull << 11)
+#define SLB_VSID_PROBLEM_STATE		(0x1ull << 10)
+#define SLB_VSID_PROBLEM_STATE_MASK	(0x1ull << 10)
+#define SLB_VSID_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_NO_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_EXECUTE_SEGMENT_MASK	(0x1ull << 9)
+#define SLB_VSID_4K_PAGE		(0x0 << 8)
+#define SLB_VSID_LARGE_PAGE		(0x1ull << 8)
+#define SLB_VSID_PAGE_SIZE_MASK		(0x1ull << 8)
+#define SLB_VSID_CLASS_MASK		(0x1ull << 7)
+#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK	(0x1ull << 6)
+	u64 slb_invalidate_entry_W;				/* 0x1120 */
+	u64 slb_invalidate_all_W;				/* 0x1128 */
+	u8  pad_0x1130_0x2000[0x2000 - 0x1130]; 		/* 0x1130 */
+
+	/* Context Save / Restore Area */
+	struct mfc_cq_sr spuq[16];				/* 0x2000 */
+	struct mfc_cq_sr puq[8];				/* 0x2200 */
+	u8  pad_0x2300_0x3000[0x3000 - 0x2300]; 		/* 0x2300 */
+
+	/* MFC Control */
+	u64 mfc_control_RW;					/* 0x3000 */
+#define MFC_CNTL_RESUME_DMA_QUEUE		(0ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE		(1ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK		(1ull << 0)
+#define MFC_CNTL_SUSPEND_MASK			(1ull << 4)
+#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION	(0ull << 8)
+#define MFC_CNTL_SUSPEND_IN_PROGRESS		(1ull << 8)
+#define MFC_CNTL_SUSPEND_COMPLETE		(3ull << 8)
+#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK	(3ull << 8)
+#define MFC_CNTL_DMA_QUEUES_EMPTY		(1ull << 14)
+#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK		(1ull << 14)
+#define MFC_CNTL_PURGE_DMA_REQUEST		(1ull << 15)
+#define MFC_CNTL_PURGE_DMA_IN_PROGRESS		(1ull << 24)
+#define MFC_CNTL_PURGE_DMA_COMPLETE		(3ull << 24)
+#define MFC_CNTL_PURGE_DMA_STATUS_MASK		(3ull << 24)
+#define MFC_CNTL_RESTART_DMA_COMMAND		(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING	(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
+#define MFC_CNTL_MFC_PRIVILEGE_STATE		(2ull << 33)
+#define MFC_CNTL_MFC_PROBLEM_STATE		(3ull << 33)
+#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK	(3ull << 33)
+#define MFC_CNTL_DECREMENTER_HALTED		(1ull << 35)
+#define MFC_CNTL_DECREMENTER_RUNNING		(1ull << 40)
+#define MFC_CNTL_DECREMENTER_STATUS_MASK	(1ull << 40)
+	u8  pad_0x3008_0x4000[0x4000 - 0x3008]; 		/* 0x3008 */
+
+	/* Interrupt Mailbox */
+	u64 puint_mb_R;						/* 0x4000 */
+	u8  pad_0x4008_0x4040[0x4040 - 0x4008]; 		/* 0x4008 */
+
+	/* SPU Control */
+	u64 spu_privcntl_RW;					/* 0x4040 */
+#define SPU_PRIVCNTL_MODE_NORMAL		(0x0ull << 0)
+#define SPU_PRIVCNTL_MODE_SINGLE_STEP		(0x1ull << 0)
+#define SPU_PRIVCNTL_MODE_MASK			(0x1ull << 0)
+#define SPU_PRIVCNTL_NO_ATTENTION_EVENT		(0x0ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT		(0x1ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK	(0x1ull << 1)
+#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL		(0x0ull << 2)
+#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK	(0x1ull << 2)
+	u8  pad_0x4048_0x4058[0x10];				/* 0x4048 */
+	u64 spu_lslr_RW;					/* 0x4058 */
+	u64 spu_chnlcntptr_RW;					/* 0x4060 */
+	u64 spu_chnlcnt_RW;					/* 0x4068 */
+	u64 spu_chnldata_RW;					/* 0x4070 */
+	u64 spu_cfg_RW;						/* 0x4078 */
+	u8  pad_0x4080_0x5000[0x5000 - 0x4080]; 		/* 0x4080 */
+
+	/* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
+	u64 spu_pm_trace_tag_status_RW;				/* 0x5000 */
+	u64 spu_tag_status_query_RW;				/* 0x5008 */
+#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
+#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
+	u64 spu_cmd_buf1_RW;					/* 0x5010 */
+#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
+#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
+	u64 spu_cmd_buf2_RW;					/* 0x5018 */
+#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
+#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
+#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
+	u64 spu_atomic_status_RW;				/* 0x5020 */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 1 State Area */
+struct spu_priv1 {
+	/* Control and Configuration Area */
+	u64 mfc_sr1_RW;						/* 0x000 */
+#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK	0x01ull
+#define MFC_STATE1_BUS_TLBIE_MASK		0x02ull
+#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK	0x04ull
+#define MFC_STATE1_PROBLEM_STATE_MASK		0x08ull
+#define MFC_STATE1_RELOCATE_MASK		0x10ull
+#define MFC_STATE1_MASTER_RUN_CONTROL_MASK	0x20ull
+#define MFC_STATE1_TABLE_SEARCH_MASK		0x40ull
+	u64 mfc_lpid_RW;					/* 0x008 */
+	u64 spu_idr_RW;						/* 0x010 */
+	u64 mfc_vr_RO;						/* 0x018 */
+#define MFC_VERSION_BITS		(0xffff << 16)
+#define MFC_REVISION_BITS		(0xffff)
+#define MFC_GET_VERSION_BITS(vr)	(((vr) & MFC_VERSION_BITS) >> 16)
+#define MFC_GET_REVISION_BITS(vr)	((vr) & MFC_REVISION_BITS)
+	u64 spu_vr_RO;						/* 0x020 */
+#define SPU_VERSION_BITS		(0xffff << 16)
+#define SPU_REVISION_BITS		(0xffff)
+#define SPU_GET_VERSION_BITS(vr)	(vr & SPU_VERSION_BITS) >> 16
+#define SPU_GET_REVISION_BITS(vr)	(vr & SPU_REVISION_BITS)
+	u8  pad_0x28_0x100[0x100 - 0x28];			/* 0x28 */
+
+	/* Interrupt Area */
+	u64 int_mask_RW[3];					/* 0x100 */
+#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR		0x1L
+#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR		0x2L
+#define CLASS0_ENABLE_SPU_ERROR_INTR			0x4L
+#define CLASS0_ENABLE_MFC_FIR_INTR			0x8L
+#define CLASS1_ENABLE_SEGMENT_FAULT_INTR		0x1L
+#define CLASS1_ENABLE_STORAGE_FAULT_INTR		0x2L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR	0x4L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_INTR			0x1L
+#define CLASS2_ENABLE_SPU_STOP_INTR			0x2L
+#define CLASS2_ENABLE_SPU_HALT_INTR			0x4L
+#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR		0x10L
+	u8  pad_0x118_0x140[0x28];				/* 0x118 */
+	u64 int_stat_RW[3];					/* 0x140 */
+#define CLASS0_DMA_ALIGNMENT_INTR			0x1L
+#define CLASS0_INVALID_DMA_COMMAND_INTR			0x2L
+#define CLASS0_SPU_ERROR_INTR				0x4L
+#define CLASS0_INTR_MASK				0x7L
+#define CLASS1_SEGMENT_FAULT_INTR			0x1L
+#define CLASS1_STORAGE_FAULT_INTR			0x2L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR		0x4L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR		0x8L
+#define CLASS1_INTR_MASK				0xfL
+#define CLASS2_MAILBOX_INTR				0x1L
+#define CLASS2_SPU_STOP_INTR				0x2L
+#define CLASS2_SPU_HALT_INTR				0x4L
+#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR		0x8L
+#define CLASS2_MAILBOX_THRESHOLD_INTR			0x10L
+#define CLASS2_INTR_MASK				0x1fL
+	u8  pad_0x158_0x180[0x28];				/* 0x158 */
+	u64 int_route_RW;					/* 0x180 */
+
+	/* Interrupt Routing */
+	u8  pad_0x188_0x200[0x200 - 0x188];			/* 0x188 */
+
+	/* Atomic Unit Control Area */
+	u64 mfc_atomic_flush_RW;				/* 0x200 */
+#define mfc_atomic_flush_enable			0x1L
+	u8  pad_0x208_0x280[0x78];				/* 0x208 */
+	u64 resource_allocation_groupID_RW;			/* 0x280 */
+	u64 resource_allocation_enable_RW; 			/* 0x288 */
+	u8  pad_0x290_0x3c8[0x3c8 - 0x290];			/* 0x290 */
+
+	/* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
+
+	u64 smf_sbi_signal_sel;					/* 0x3c8 */
+#define smf_sbi_mask_lsb	56
+#define smf_sbi_shift		(63 - smf_sbi_mask_lsb)
+#define smf_sbi_mask		(0x301LL << smf_sbi_shift)
+#define smf_sbi_bus0_bits	(0x001LL << smf_sbi_shift)
+#define smf_sbi_bus2_bits	(0x100LL << smf_sbi_shift)
+#define smf_sbi2_bus0_bits	(0x201LL << smf_sbi_shift)
+#define smf_sbi2_bus2_bits	(0x300LL << smf_sbi_shift)
+	u64 smf_ato_signal_sel;					/* 0x3d0 */
+#define smf_ato_mask_lsb	35
+#define smf_ato_shift		(63 - smf_ato_mask_lsb)
+#define smf_ato_mask		(0x3LL << smf_ato_shift)
+#define smf_ato_bus0_bits	(0x2LL << smf_ato_shift)
+#define smf_ato_bus2_bits	(0x1LL << smf_ato_shift)
+	u8  pad_0x3d8_0x400[0x400 - 0x3d8];			/* 0x3d8 */
+
+	/* TLB Management Registers */
+	u64 mfc_sdr_RW;						/* 0x400 */
+	u8  pad_0x408_0x500[0xf8];				/* 0x408 */
+	u64 tlb_index_hint_RO;					/* 0x500 */
+	u64 tlb_index_W;					/* 0x508 */
+	u64 tlb_vpn_RW;						/* 0x510 */
+	u64 tlb_rpn_RW;						/* 0x518 */
+	u8  pad_0x520_0x540[0x20];				/* 0x520 */
+	u64 tlb_invalidate_entry_W;				/* 0x540 */
+	u64 tlb_invalidate_all_W;				/* 0x548 */
+	u8  pad_0x550_0x580[0x580 - 0x550];			/* 0x550 */
+
+	/* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
+	u64 smm_hid;						/* 0x580 */
+#define PAGE_SIZE_MASK		0xf000000000000000ull
+#define PAGE_SIZE_16MB_64KB	0x2000000000000000ull
+	u8  pad_0x588_0x600[0x600 - 0x588];			/* 0x588 */
+
+	/* MFC Status/Control Area */
+	u64 mfc_accr_RW;					/* 0x600 */
+#define MFC_ACCR_EA_ACCESS_GET		(1 << 0)
+#define MFC_ACCR_EA_ACCESS_PUT		(1 << 1)
+#define MFC_ACCR_LS_ACCESS_GET		(1 << 3)
+#define MFC_ACCR_LS_ACCESS_PUT		(1 << 4)
+	u8  pad_0x608_0x610[0x8];				/* 0x608 */
+	u64 mfc_dsisr_RW;					/* 0x610 */
+#define MFC_DSISR_PTE_NOT_FOUND		(1 << 30)
+#define MFC_DSISR_ACCESS_DENIED		(1 << 27)
+#define MFC_DSISR_ATOMIC		(1 << 26)
+#define MFC_DSISR_ACCESS_PUT		(1 << 25)
+#define MFC_DSISR_ADDR_MATCH		(1 << 22)
+#define MFC_DSISR_LS			(1 << 17)
+#define MFC_DSISR_L			(1 << 16)
+#define MFC_DSISR_ADDRESS_OVERFLOW	(1 << 0)
+	u8  pad_0x618_0x620[0x8];				/* 0x618 */
+	u64 mfc_dar_RW;						/* 0x620 */
+	u8  pad_0x628_0x700[0x700 - 0x628];			/* 0x628 */
+
+	/* Replacement Management Table (RMT) Area */
+	u64 rmt_index_RW;					/* 0x700 */
+	u8  pad_0x708_0x710[0x8];				/* 0x708 */
+	u64 rmt_data1_RW;					/* 0x710 */
+	u8  pad_0x718_0x800[0x800 - 0x718];			/* 0x718 */
+
+	/* Control/Configuration Registers */
+	u64 mfc_dsir_R;						/* 0x800 */
+#define MFC_DSIR_Q			(1 << 31)
+#define MFC_DSIR_SPU_QUEUE		MFC_DSIR_Q
+	u64 mfc_lsacr_RW;					/* 0x808 */
+#define MFC_LSACR_COMPARE_MASK		((~0ull) << 32)
+#define MFC_LSACR_COMPARE_ADDR		((~0ull) >> 32)
+	u64 mfc_lscrr_R;					/* 0x810 */
+#define MFC_LSCRR_Q			(1 << 31)
+#define MFC_LSCRR_SPU_QUEUE		MFC_LSCRR_Q
+#define MFC_LSCRR_QI_SHIFT		32
+#define MFC_LSCRR_QI_MASK		((~0ull) << MFC_LSCRR_QI_SHIFT)
+	u8  pad_0x818_0x820[0x8];				/* 0x818 */
+	u64 mfc_tclass_id_RW;					/* 0x820 */
+#define MFC_TCLASS_ID_ENABLE		(1L << 0L)
+#define MFC_TCLASS_SLOT2_ENABLE		(1L << 5L)
+#define MFC_TCLASS_SLOT1_ENABLE		(1L << 6L)
+#define MFC_TCLASS_SLOT0_ENABLE		(1L << 7L)
+#define MFC_TCLASS_QUOTA_2_SHIFT	8L
+#define MFC_TCLASS_QUOTA_1_SHIFT	16L
+#define MFC_TCLASS_QUOTA_0_SHIFT	24L
+#define MFC_TCLASS_QUOTA_2_MASK		(0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
+#define MFC_TCLASS_QUOTA_1_MASK		(0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
+#define MFC_TCLASS_QUOTA_0_MASK		(0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
+	u8  pad_0x828_0x900[0x900 - 0x828];			/* 0x828 */
+
+	/* Real Mode Support Registers */
+	u64 mfc_rm_boundary;					/* 0x900 */
+	u8  pad_0x908_0x938[0x30];				/* 0x908 */
+	u64 smf_dma_signal_sel;					/* 0x938 */
+#define mfc_dma1_mask_lsb	41
+#define mfc_dma1_shift		(63 - mfc_dma1_mask_lsb)
+#define mfc_dma1_mask		(0x3LL << mfc_dma1_shift)
+#define mfc_dma1_bits		(0x1LL << mfc_dma1_shift)
+#define mfc_dma2_mask_lsb	43
+#define mfc_dma2_shift		(63 - mfc_dma2_mask_lsb)
+#define mfc_dma2_mask		(0x3LL << mfc_dma2_shift)
+#define mfc_dma2_bits		(0x1LL << mfc_dma2_shift)
+	u8  pad_0x940_0xa38[0xf8];				/* 0x940 */
+	u64 smm_signal_sel;					/* 0xa38 */
+#define smm_sig_mask_lsb	12
+#define smm_sig_shift		(63 - smm_sig_mask_lsb)
+#define smm_sig_mask		(0x3LL << smm_sig_shift)
+#define smm_sig_bus0_bits	(0x2LL << smm_sig_shift)
+#define smm_sig_bus2_bits	(0x1LL << smm_sig_shift)
+	u8  pad_0xa40_0xc00[0xc00 - 0xa40];			/* 0xa40 */
+
+	/* DMA Command Error Area */
+	u64 mfc_cer_R;						/* 0xc00 */
+#define MFC_CER_Q		(1 << 31)
+#define MFC_CER_SPU_QUEUE	MFC_CER_Q
+	u8  pad_0xc08_0x1000[0x1000 - 0xc08];			/* 0xc08 */
+
+	/* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
+	/* DMA Command Error Area */
+	u64 spu_ecc_cntl_RW;					/* 0x1000 */
+#define SPU_ECC_CNTL_E			(1ull << 0ull)
+#define SPU_ECC_CNTL_ENABLE		SPU_ECC_CNTL_E
+#define SPU_ECC_CNTL_DISABLE		(~SPU_ECC_CNTL_E & 1L)
+#define SPU_ECC_CNTL_S			(1ull << 1ull)
+#define SPU_ECC_STOP_AFTER_ERROR	SPU_ECC_CNTL_S
+#define SPU_ECC_CONTINUE_AFTER_ERROR	(~SPU_ECC_CNTL_S & 2L)
+#define SPU_ECC_CNTL_B			(1ull << 2ull)
+#define SPU_ECC_BACKGROUND_ENABLE	SPU_ECC_CNTL_B
+#define SPU_ECC_BACKGROUND_DISABLE	(~SPU_ECC_CNTL_B & 4L)
+#define SPU_ECC_CNTL_I_SHIFT		3ull
+#define SPU_ECC_CNTL_I_MASK		(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_ALWAYS		(~SPU_ECC_CNTL_I & 12L)
+#define SPU_ECC_WRITE_CORRECTABLE	(1ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_UNCORRECTABLE	(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_CNTL_D			(1ull << 5ull)
+#define SPU_ECC_DETECTION_ENABLE	SPU_ECC_CNTL_D
+#define SPU_ECC_DETECTION_DISABLE	(~SPU_ECC_CNTL_D & 32L)
+	u64 spu_ecc_stat_RW;					/* 0x1008 */
+#define SPU_ECC_CORRECTED_ERROR		(1ull << 0ul)
+#define SPU_ECC_UNCORRECTED_ERROR	(1ull << 1ul)
+#define SPU_ECC_SCRUB_COMPLETE		(1ull << 2ul)
+#define SPU_ECC_SCRUB_IN_PROGRESS	(1ull << 3ul)
+#define SPU_ECC_INSTRUCTION_ERROR	(1ull << 4ul)
+#define SPU_ECC_DATA_ERROR		(1ull << 5ul)
+#define SPU_ECC_DMA_ERROR		(1ull << 6ul)
+#define SPU_ECC_STATUS_CNT_MASK		(256ull << 8)
+	u64 spu_ecc_addr_RW;					/* 0x1010 */
+	u64 spu_err_mask_RW;					/* 0x1018 */
+#define SPU_ERR_ILLEGAL_INSTR		(1ull << 0ul)
+#define SPU_ERR_ILLEGAL_CHANNEL		(1ull << 1ul)
+	u8  pad_0x1020_0x1028[0x1028 - 0x1020];			/* 0x1020 */
+
+	/* SPU Debug-Trace Bus (DTB) Selection Registers */
+	u64 spu_trig0_sel;					/* 0x1028 */
+	u64 spu_trig1_sel;					/* 0x1030 */
+	u64 spu_trig2_sel;					/* 0x1038 */
+	u64 spu_trig3_sel;					/* 0x1040 */
+	u64 spu_trace_sel;					/* 0x1048 */
+#define spu_trace_sel_mask		0x1f1fLL
+#define spu_trace_sel_bus0_bits		0x1000LL
+#define spu_trace_sel_bus2_bits		0x0010LL
+	u64 spu_event0_sel;					/* 0x1050 */
+	u64 spu_event1_sel;					/* 0x1058 */
+	u64 spu_event2_sel;					/* 0x1060 */
+	u64 spu_event3_sel;					/* 0x1068 */
+	u64 spu_trace_cntl;					/* 0x1070 */
+} __attribute__ ((aligned(0x2000)));
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
new file mode 100644
index 000000000000..a40fd491250c
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_csa.h
@@ -0,0 +1,266 @@
+/*
+ * spu_csa.h: Definitions for SPU context save area (CSA).
+ *
+ * (C) Copyright IBM 2005
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_CSA_H_
+#define _SPU_CSA_H_
+#ifdef __KERNEL__
+
+/*
+ * Total number of 128-bit registers.
+ */
+#define NR_SPU_GPRS         	128
+#define NR_SPU_SPRS         	9
+#define NR_SPU_REGS_PAD	    	7
+#define NR_SPU_SPILL_REGS   	144	/* GPRS + SPRS + PAD */
+#define SIZEOF_SPU_SPILL_REGS	NR_SPU_SPILL_REGS * 16
+
+#define SPU_SAVE_COMPLETE      	0x3FFB
+#define SPU_RESTORE_COMPLETE   	0x3FFC
+
+/*
+ * Definitions for various 'stopped' status conditions,
+ * to be recreated during context restore.
+ */
+#define SPU_STOPPED_STATUS_P    1
+#define SPU_STOPPED_STATUS_I    2
+#define SPU_STOPPED_STATUS_H    3
+#define SPU_STOPPED_STATUS_S    4
+#define SPU_STOPPED_STATUS_S_I  5
+#define SPU_STOPPED_STATUS_S_P  6
+#define SPU_STOPPED_STATUS_P_H  7
+#define SPU_STOPPED_STATUS_P_I  8
+#define SPU_STOPPED_STATUS_R    9
+
+/*
+ * Definitions for software decrementer status flag.
+ */
+#define SPU_DECR_STATUS_RUNNING 0x1
+#define SPU_DECR_STATUS_WRAPPED 0x2
+
+#ifndef  __ASSEMBLY__
+/**
+ * spu_reg128 - generic 128-bit register definition.
+ */
+struct spu_reg128 {
+	u32 slot[4];
+};
+
+/**
+ * struct spu_lscsa - Local Store Context Save Area.
+ * @gprs: Array of saved registers.
+ * @fpcr: Saved floating point status control register.
+ * @decr: Saved decrementer value.
+ * @decr_status: Indicates software decrementer status flags.
+ * @ppu_mb: Saved PPU mailbox data.
+ * @ppuint_mb: Saved PPU interrupting mailbox data.
+ * @tag_mask: Saved tag group mask.
+ * @event_mask: Saved event mask.
+ * @srr0: Saved SRR0.
+ * @stopped_status: Conditions to be recreated by restore.
+ * @ls: Saved contents of Local Storage Area.
+ *
+ * The LSCSA represents state that is primarily saved and
+ * restored by SPU-side code.
+ */
+struct spu_lscsa {
+	struct spu_reg128 gprs[128];
+	struct spu_reg128 fpcr;
+	struct spu_reg128 decr;
+	struct spu_reg128 decr_status;
+	struct spu_reg128 ppu_mb;
+	struct spu_reg128 ppuint_mb;
+	struct spu_reg128 tag_mask;
+	struct spu_reg128 event_mask;
+	struct spu_reg128 srr0;
+	struct spu_reg128 stopped_status;
+
+	/*
+	 * 'ls' must be page-aligned on all configurations.
+	 * Since we don't want to rely on having the spu-gcc
+	 * installed to build the kernel and this structure
+	 * is used in the SPU-side code, make it 64k-page
+	 * aligned for now.
+	 */
+	unsigned char ls[LS_SIZE] __attribute__((aligned(65536)));
+};
+
+#ifndef __SPU__
+/*
+ * struct spu_problem_collapsed - condensed problem state area, w/o pads.
+ */
+struct spu_problem_collapsed {
+	u64 spc_mssync_RW;
+	u32 mfc_lsa_W;
+	u32 unused_pad0;
+	u64 mfc_ea_W;
+	union mfc_tag_size_class_cmd mfc_union_W;
+	u32 dma_qstatus_R;
+	u32 dma_querytype_RW;
+	u32 dma_querymask_RW;
+	u32 dma_tagstatus_R;
+	u32 pu_mb_R;
+	u32 spu_mb_W;
+	u32 mb_stat_R;
+	u32 spu_runcntl_RW;
+	u32 spu_status_R;
+	u32 spu_spc_R;
+	u32 spu_npc_RW;
+	u32 signal_notify1;
+	u32 signal_notify2;
+	u32 unused_pad1;
+};
+
+/*
+ * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
+ */
+struct spu_priv1_collapsed {
+	u64 mfc_sr1_RW;
+	u64 mfc_lpid_RW;
+	u64 spu_idr_RW;
+	u64 mfc_vr_RO;
+	u64 spu_vr_RO;
+	u64 int_mask_class0_RW;
+	u64 int_mask_class1_RW;
+	u64 int_mask_class2_RW;
+	u64 int_stat_class0_RW;
+	u64 int_stat_class1_RW;
+	u64 int_stat_class2_RW;
+	u64 int_route_RW;
+	u64 mfc_atomic_flush_RW;
+	u64 resource_allocation_groupID_RW;
+	u64 resource_allocation_enable_RW;
+	u64 mfc_fir_R;
+	u64 mfc_fir_status_or_W;
+	u64 mfc_fir_status_and_W;
+	u64 mfc_fir_mask_R;
+	u64 mfc_fir_mask_or_W;
+	u64 mfc_fir_mask_and_W;
+	u64 mfc_fir_chkstp_enable_RW;
+	u64 smf_sbi_signal_sel;
+	u64 smf_ato_signal_sel;
+	u64 tlb_index_hint_RO;
+	u64 tlb_index_W;
+	u64 tlb_vpn_RW;
+	u64 tlb_rpn_RW;
+	u64 tlb_invalidate_entry_W;
+	u64 tlb_invalidate_all_W;
+	u64 smm_hid;
+	u64 mfc_accr_RW;
+	u64 mfc_dsisr_RW;
+	u64 mfc_dar_RW;
+	u64 rmt_index_RW;
+	u64 rmt_data1_RW;
+	u64 mfc_dsir_R;
+	u64 mfc_lsacr_RW;
+	u64 mfc_lscrr_R;
+	u64 mfc_tclass_id_RW;
+	u64 mfc_rm_boundary;
+	u64 smf_dma_signal_sel;
+	u64 smm_signal_sel;
+	u64 mfc_cer_R;
+	u64 pu_ecc_cntl_RW;
+	u64 pu_ecc_stat_RW;
+	u64 spu_ecc_addr_RW;
+	u64 spu_err_mask_RW;
+	u64 spu_trig0_sel;
+	u64 spu_trig1_sel;
+	u64 spu_trig2_sel;
+	u64 spu_trig3_sel;
+	u64 spu_trace_sel;
+	u64 spu_event0_sel;
+	u64 spu_event1_sel;
+	u64 spu_event2_sel;
+	u64 spu_event3_sel;
+	u64 spu_trace_cntl;
+};
+
+/*
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
+ */
+struct spu_priv2_collapsed {
+	u64 slb_index_W;
+	u64 slb_esid_RW;
+	u64 slb_vsid_RW;
+	u64 slb_invalidate_entry_W;
+	u64 slb_invalidate_all_W;
+	struct mfc_cq_sr spuq[16];
+	struct mfc_cq_sr puq[8];
+	u64 mfc_control_RW;
+	u64 puint_mb_R;
+	u64 spu_privcntl_RW;
+	u64 spu_lslr_RW;
+	u64 spu_chnlcntptr_RW;
+	u64 spu_chnlcnt_RW;
+	u64 spu_chnldata_RW;
+	u64 spu_cfg_RW;
+	u64 spu_tag_status_query_RW;
+	u64 spu_cmd_buf1_RW;
+	u64 spu_cmd_buf2_RW;
+	u64 spu_atomic_status_RW;
+};
+
+/**
+ * struct spu_state
+ * @lscsa: Local Store Context Save Area.
+ * @prob: Collapsed Problem State Area, w/o pads.
+ * @priv1: Collapsed Privileged 1 Area, w/o pads.
+ * @priv2: Collapsed Privileged 2 Area, w/o pads.
+ * @spu_chnlcnt_RW: Array of saved channel counts.
+ * @spu_chnldata_RW: Array of saved channel data.
+ * @suspend_time: Time stamp when decrementer disabled.
+ *
+ * Structure representing the whole of the SPU
+ * context save area (CSA).  This struct contains
+ * all of the state necessary to suspend and then
+ * later optionally resume execution of an SPU
+ * context.
+ *
+ * The @lscsa region is by far the largest, and is
+ * allocated separately so that it may either be
+ * pinned or mapped to/from application memory, as
+ * appropriate for the OS environment.
+ */
+struct spu_state {
+	struct spu_lscsa *lscsa;
+#ifdef CONFIG_SPU_FS_64K_LS
+	int		use_big_pages;
+	/* One struct page per 64k page */
+#define SPU_LSCSA_NUM_BIG_PAGES	(sizeof(struct spu_lscsa) / 0x10000)
+	struct page	*lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
+#endif
+	struct spu_problem_collapsed prob;
+	struct spu_priv1_collapsed priv1;
+	struct spu_priv2_collapsed priv2;
+	u64 spu_chnlcnt_RW[32];
+	u64 spu_chnldata_RW[32];
+	u32 spu_mailbox_data[4];
+	u32 pu_mailbox_data[1];
+	u64 class_0_dar, class_0_pending;
+	u64 class_1_dar, class_1_dsisr;
+	unsigned long suspend_time;
+	spinlock_t register_lock;
+};
+
+#endif /* !__SPU__ */
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+#endif /* _SPU_CSA_H_ */
diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h
new file mode 100644
index 000000000000..3545efbf9891
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_info.h
@@ -0,0 +1,54 @@
+/*
+ * SPU info structures
+ *
+ * (C) Copyright 2006 IBM Corp.
+ *
+ * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_INFO_H
+#define _SPU_INFO_H
+
+#ifdef __KERNEL__
+#include <asm/spu.h>
+#include <linux/types.h>
+#else
+struct mfc_cq_sr {
+	__u64 mfc_cq_data0_RW;
+	__u64 mfc_cq_data1_RW;
+	__u64 mfc_cq_data2_RW;
+	__u64 mfc_cq_data3_RW;
+};
+#endif /* __KERNEL__ */
+
+struct spu_dma_info {
+	__u64 dma_info_type;
+	__u64 dma_info_mask;
+	__u64 dma_info_status;
+	__u64 dma_info_stall_and_notify;
+	__u64 dma_info_atomic_command_status;
+	struct mfc_cq_sr dma_info_command_data[16];
+};
+
+struct spu_proxydma_info {
+	__u64 proxydma_info_type;
+	__u64 proxydma_info_mask;
+	__u64 proxydma_info_status;
+	struct mfc_cq_sr proxydma_info_command_data[8];
+};
+
+#endif
diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
new file mode 100644
index 000000000000..25020a34ce7f
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_priv1.h
@@ -0,0 +1,236 @@
+/*
+ * Defines an spu hypervisor abstraction layer.
+ *
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_SPU_PRIV1_H)
+#define _SPU_PRIV1_H
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+
+struct spu;
+struct spu_context;
+
+/* access to priv1 registers */
+
+struct spu_priv1_ops {
+	void (*int_mask_and) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_or) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_set) (struct spu *spu, int class, u64 mask);
+	u64 (*int_mask_get) (struct spu *spu, int class);
+	void (*int_stat_clear) (struct spu *spu, int class, u64 stat);
+	u64 (*int_stat_get) (struct spu *spu, int class);
+	void (*cpu_affinity_set) (struct spu *spu, int cpu);
+	u64 (*mfc_dar_get) (struct spu *spu);
+	u64 (*mfc_dsisr_get) (struct spu *spu);
+	void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr);
+	void (*mfc_sdr_setup) (struct spu *spu);
+	void (*mfc_sr1_set) (struct spu *spu, u64 sr1);
+	u64 (*mfc_sr1_get) (struct spu *spu);
+	void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id);
+	u64 (*mfc_tclass_id_get) (struct spu *spu);
+	void (*tlb_invalidate) (struct spu *spu);
+	void (*resource_allocation_groupID_set) (struct spu *spu, u64 id);
+	u64 (*resource_allocation_groupID_get) (struct spu *spu);
+	void (*resource_allocation_enable_set) (struct spu *spu, u64 enable);
+	u64 (*resource_allocation_enable_get) (struct spu *spu);
+};
+
+extern const struct spu_priv1_ops* spu_priv1_ops;
+
+static inline void
+spu_int_mask_and (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_and(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_or (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_or(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_set (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_set(spu, class, mask);
+}
+
+static inline u64
+spu_int_mask_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_mask_get(spu, class);
+}
+
+static inline void
+spu_int_stat_clear (struct spu *spu, int class, u64 stat)
+{
+	spu_priv1_ops->int_stat_clear(spu, class, stat);
+}
+
+static inline u64
+spu_int_stat_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_stat_get (spu, class);
+}
+
+static inline void
+spu_cpu_affinity_set (struct spu *spu, int cpu)
+{
+	spu_priv1_ops->cpu_affinity_set(spu, cpu);
+}
+
+static inline u64
+spu_mfc_dar_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dar_get(spu);
+}
+
+static inline u64
+spu_mfc_dsisr_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dsisr_get(spu);
+}
+
+static inline void
+spu_mfc_dsisr_set (struct spu *spu, u64 dsisr)
+{
+	spu_priv1_ops->mfc_dsisr_set(spu, dsisr);
+}
+
+static inline void
+spu_mfc_sdr_setup (struct spu *spu)
+{
+	spu_priv1_ops->mfc_sdr_setup(spu);
+}
+
+static inline void
+spu_mfc_sr1_set (struct spu *spu, u64 sr1)
+{
+	spu_priv1_ops->mfc_sr1_set(spu, sr1);
+}
+
+static inline u64
+spu_mfc_sr1_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_sr1_get(spu);
+}
+
+static inline void
+spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id)
+{
+	spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id);
+}
+
+static inline u64
+spu_mfc_tclass_id_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_tclass_id_get(spu);
+}
+
+static inline void
+spu_tlb_invalidate (struct spu *spu)
+{
+	spu_priv1_ops->tlb_invalidate(spu);
+}
+
+static inline void
+spu_resource_allocation_groupID_set (struct spu *spu, u64 id)
+{
+	spu_priv1_ops->resource_allocation_groupID_set(spu, id);
+}
+
+static inline u64
+spu_resource_allocation_groupID_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_groupID_get(spu);
+}
+
+static inline void
+spu_resource_allocation_enable_set (struct spu *spu, u64 enable)
+{
+	spu_priv1_ops->resource_allocation_enable_set(spu, enable);
+}
+
+static inline u64
+spu_resource_allocation_enable_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_enable_get(spu);
+}
+
+/* spu management abstraction */
+
+struct spu_management_ops {
+	int (*enumerate_spus)(int (*fn)(void *data));
+	int (*create_spu)(struct spu *spu, void *data);
+	int (*destroy_spu)(struct spu *spu);
+	void (*enable_spu)(struct spu_context *ctx);
+	void (*disable_spu)(struct spu_context *ctx);
+	int (*init_affinity)(void);
+};
+
+extern const struct spu_management_ops* spu_management_ops;
+
+static inline int
+spu_enumerate_spus (int (*fn)(void *data))
+{
+	return spu_management_ops->enumerate_spus(fn);
+}
+
+static inline int
+spu_create_spu (struct spu *spu, void *data)
+{
+	return spu_management_ops->create_spu(spu, data);
+}
+
+static inline int
+spu_destroy_spu (struct spu *spu)
+{
+	return spu_management_ops->destroy_spu(spu);
+}
+
+static inline int
+spu_init_affinity (void)
+{
+	return spu_management_ops->init_affinity();
+}
+
+static inline void
+spu_enable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->enable_spu(ctx);
+}
+
+static inline void
+spu_disable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->disable_spu(ctx);
+}
+
+/*
+ * The declarations folowing are put here for convenience
+ * and only intended to be used by the platform setup code.
+ */
+
+extern const struct spu_priv1_ops spu_priv1_mmio_ops;
+extern const struct spu_priv1_ops spu_priv1_beat_ops;
+
+extern const struct spu_management_ops spu_management_of_ops;
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h
new file mode 100644
index 000000000000..f593b0f9b627
--- /dev/null
+++ b/arch/powerpc/include/asm/sstep.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct pt_regs;
+
+/*
+ * We don't allow single-stepping an mtmsrd that would clear
+ * MSR_RI, since that would make the exception unrecoverable.
+ * Since we need to single-step to proceed from a breakpoint,
+ * we don't allow putting a breakpoint on an mtmsrd instruction.
+ * Similarly we don't allow breakpoints on rfid instructions.
+ * These macros tell us if an instruction is a mtmsrd or rfid.
+ * Note that IS_MTMSRD returns true for both an mtmsr (32-bit)
+ * and an mtmsrd (64-bit).
+ */
+#define IS_MTMSRD(instr)	(((instr) & 0xfc0007be) == 0x7c000124)
+#define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
+#define IS_RFI(instr)		(((instr) & 0xfc0007fe) == 0x4c000064)
+
+/* Emulate instructions that cause a transfer of control. */
+extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/asm/stat.h
new file mode 100644
index 000000000000..e4edc510b530
--- /dev/null
+++ b/arch/powerpc/include/asm/stat.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_POWERPC_STAT_H
+#define _ASM_POWERPC_STAT_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+
+#define STAT_HAVE_NSEC 1
+
+#ifndef __powerpc64__
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+#endif /* !__powerpc64__ */
+
+struct stat {
+	unsigned long	st_dev;
+	ino_t		st_ino;
+#ifdef __powerpc64__
+	nlink_t		st_nlink;
+	mode_t		st_mode;
+#else
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+#endif
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned long	st_rdev;
+	off_t		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+#ifdef __powerpc64__
+	unsigned long	__unused6;
+#endif
+};
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long long st_dev;		/* Device.  */
+	unsigned long long st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned short	__pad2;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif /* _ASM_POWERPC_STAT_H */
diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h
new file mode 100644
index 000000000000..67024026c10d
--- /dev/null
+++ b/arch/powerpc/include/asm/statfs.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_POWERPC_STATFS_H
+#define _ASM_POWERPC_STATFS_H
+
+/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
+
+#ifndef __powerpc64__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+#include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * We're already 64-bit, so duplicate the definition
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+#endif /* ! __powerpc64__ */
+#endif
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
new file mode 100644
index 000000000000..e40010abcaf1
--- /dev/null
+++ b/arch/powerpc/include/asm/string.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_STRING_H
+#define _ASM_POWERPC_STRING_H
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_STRING_H */
diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h
new file mode 100644
index 000000000000..cbf2c9404c37
--- /dev/null
+++ b/arch/powerpc/include/asm/suspend.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POWERPC_SUSPEND_H
+#define __ASM_POWERPC_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+void save_processor_state(void);
+void restore_processor_state(void);
+
+#endif /* __ASM_POWERPC_SUSPEND_H */
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
new file mode 100644
index 000000000000..45963e80f557
--- /dev/null
+++ b/arch/powerpc/include/asm/synch.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_POWERPC_SYNCH_H 
+#define _ASM_POWERPC_SYNCH_H 
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
+extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
+			     void *fixup_end);
+
+static inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void isync(void)
+{
+	__asm__ __volatile__ ("isync" : : : "memory");
+}
+#endif /* __ASSEMBLY__ */
+
+#if defined(__powerpc64__)
+#    define LWSYNC	lwsync
+#elif defined(CONFIG_E500)
+#    define LWSYNC					\
+	START_LWSYNC_SECTION(96);			\
+	sync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
+#else
+#    define LWSYNC	sync
+#endif
+
+#ifdef CONFIG_SMP
+#define ISYNC_ON_SMP	"\n\tisync\n"
+#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#else
+#define ISYNC_ON_SMP
+#define LWSYNC_ON_SMP
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SYNCH_H */
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
new file mode 100644
index 000000000000..efa7f0b879f3
--- /dev/null
+++ b/arch/powerpc/include/asm/syscall.h
@@ -0,0 +1,84 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gpr[3] = regs->orig_gpr3;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gpr[3];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->ccr |= 0x1000L;
+		regs->gpr[3] = -error;
+	} else {
+		regs->ccr &= ~0x1000L;
+		regs->gpr[3] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+#ifdef CONFIG_PPC64
+	if (test_tsk_thread_flag(task, TIF_32BIT)) {
+		/*
+		 * Zero-extend 32-bit argument values.  The high bits are
+		 * garbage ignored by the actual syscall dispatch.
+		 */
+		while (n-- > 0)
+			args[n] = (u32) regs->gpr[3 + i + n];
+		return;
+	}
+#endif
+	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
new file mode 100644
index 000000000000..eb8eb400c664
--- /dev/null
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_POWERPC_SYSCALLS_H
+#define __ASM_POWERPC_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/signal.h>
+
+struct new_utsname;
+struct pt_regs;
+struct rtas_args;
+struct sigaction;
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, off_t offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
+		unsigned long a2, unsigned long a3, unsigned long a4,
+		unsigned long a5, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
+		int __user *parent_tidp, void __user *child_threadptr,
+		int __user *child_tidp, int p6, struct pt_regs *regs);
+asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
+asmlinkage long sys_rt_sigaction(int sig,
+		const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+asmlinkage int sys_ipc(uint call, int first, unsigned long second,
+		long third, void __user *ptr, long fifth);
+asmlinkage long ppc64_personality(unsigned long personality);
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
+asmlinkage time_t sys64_time(time_t __user * tloc);
+asmlinkage long ppc_newuname(struct new_utsname __user * name);
+
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+		size_t sigsetsize);
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+		stack_t __user *uoss, unsigned long r5, unsigned long r6,
+		unsigned long r7, unsigned long r8, struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
new file mode 100644
index 000000000000..e084272ed1c2
--- /dev/null
+++ b/arch/powerpc/include/asm/systbl.h
@@ -0,0 +1,324 @@
+/*
+ * List of powerpc syscalls. For the meaning of the _SPU suffix see
+ * arch/powerpc/platforms/cell/spu_callbacks.c
+ */
+
+SYSCALL(restart_syscall)
+SYSCALL(exit)
+PPC_SYS(fork)
+SYSCALL_SPU(read)
+SYSCALL_SPU(write)
+COMPAT_SYS_SPU(open)
+SYSCALL_SPU(close)
+COMPAT_SYS_SPU(waitpid)
+COMPAT_SYS_SPU(creat)
+SYSCALL_SPU(link)
+SYSCALL_SPU(unlink)
+COMPAT_SYS(execve)
+SYSCALL_SPU(chdir)
+COMPAT_SYS_SPU(time)
+SYSCALL_SPU(mknod)
+SYSCALL_SPU(chmod)
+SYSCALL_SPU(lchown)
+SYSCALL(ni_syscall)
+OLDSYS(stat)
+SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek)
+SYSCALL_SPU(getpid)
+COMPAT_SYS(mount)
+SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
+SYSCALL_SPU(setuid)
+SYSCALL_SPU(getuid)
+COMPAT_SYS_SPU(stime)
+COMPAT_SYS(ptrace)
+SYSCALL_SPU(alarm)
+OLDSYS(fstat)
+COMPAT_SYS(pause)
+COMPAT_SYS(utime)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(access)
+COMPAT_SYS_SPU(nice)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(sync)
+COMPAT_SYS_SPU(kill)
+SYSCALL_SPU(rename)
+COMPAT_SYS_SPU(mkdir)
+SYSCALL_SPU(rmdir)
+SYSCALL_SPU(dup)
+SYSCALL_SPU(pipe)
+COMPAT_SYS_SPU(times)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(brk)
+SYSCALL_SPU(setgid)
+SYSCALL_SPU(getgid)
+SYSCALL(signal)
+SYSCALL_SPU(geteuid)
+SYSCALL_SPU(getegid)
+SYSCALL(acct)
+SYSCALL(umount)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(ioctl)
+COMPAT_SYS_SPU(fcntl)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(setpgid)
+SYSCALL(ni_syscall)
+SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+COMPAT_SYS_SPU(umask)
+SYSCALL_SPU(chroot)
+SYSCALL(ustat)
+SYSCALL_SPU(dup2)
+SYSCALL_SPU(getppid)
+SYSCALL_SPU(getpgrp)
+SYSCALL_SPU(setsid)
+SYS32ONLY(sigaction)
+SYSCALL_SPU(sgetmask)
+COMPAT_SYS_SPU(ssetmask)
+SYSCALL_SPU(setreuid)
+SYSCALL_SPU(setregid)
+SYS32ONLY(sigsuspend)
+COMPAT_SYS(sigpending)
+COMPAT_SYS_SPU(sethostname)
+COMPAT_SYS_SPU(setrlimit)
+COMPAT_SYS(old_getrlimit)
+COMPAT_SYS_SPU(getrusage)
+COMPAT_SYS_SPU(gettimeofday)
+COMPAT_SYS_SPU(settimeofday)
+COMPAT_SYS_SPU(getgroups)
+COMPAT_SYS_SPU(setgroups)
+SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
+SYSCALL_SPU(symlink)
+OLDSYS(lstat)
+COMPAT_SYS_SPU(readlink)
+SYSCALL(uselib)
+SYSCALL(swapon)
+SYSCALL(reboot)
+SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSCALL_SPU(mmap)
+SYSCALL_SPU(munmap)
+SYSCALL_SPU(truncate)
+SYSCALL_SPU(ftruncate)
+SYSCALL_SPU(fchmod)
+SYSCALL_SPU(fchown)
+COMPAT_SYS_SPU(getpriority)
+COMPAT_SYS_SPU(setpriority)
+SYSCALL(ni_syscall)
+COMPAT_SYS(statfs)
+COMPAT_SYS(fstatfs)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(socketcall)
+COMPAT_SYS_SPU(syslog)
+COMPAT_SYS_SPU(setitimer)
+COMPAT_SYS_SPU(getitimer)
+COMPAT_SYS_SPU(newstat)
+COMPAT_SYS_SPU(newlstat)
+COMPAT_SYS_SPU(newfstat)
+SYSX(sys_ni_syscall,sys_uname,sys_uname)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(vhangup)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(wait4)
+SYSCALL(swapoff)
+COMPAT_SYS_SPU(sysinfo)
+COMPAT_SYS(ipc)
+SYSCALL_SPU(fsync)
+SYS32ONLY(sigreturn)
+PPC_SYS(clone)
+COMPAT_SYS_SPU(setdomainname)
+PPC_SYS_SPU(newuname)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(adjtimex)
+SYSCALL_SPU(mprotect)
+SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
+SYSCALL(ni_syscall)
+SYSCALL(init_module)
+SYSCALL(delete_module)
+SYSCALL(ni_syscall)
+SYSCALL(quotactl)
+COMPAT_SYS_SPU(getpgid)
+SYSCALL_SPU(fchdir)
+SYSCALL_SPU(bdflush)
+COMPAT_SYS(sysfs)
+SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(setfsuid)
+SYSCALL_SPU(setfsgid)
+SYSCALL_SPU(llseek)
+COMPAT_SYS_SPU(getdents)
+SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSCALL_SPU(flock)
+SYSCALL_SPU(msync)
+COMPAT_SYS_SPU(readv)
+COMPAT_SYS_SPU(writev)
+COMPAT_SYS_SPU(getsid)
+SYSCALL_SPU(fdatasync)
+COMPAT_SYS(sysctl)
+SYSCALL_SPU(mlock)
+SYSCALL_SPU(munlock)
+SYSCALL_SPU(mlockall)
+SYSCALL_SPU(munlockall)
+COMPAT_SYS_SPU(sched_setparam)
+COMPAT_SYS_SPU(sched_getparam)
+COMPAT_SYS_SPU(sched_setscheduler)
+COMPAT_SYS_SPU(sched_getscheduler)
+SYSCALL_SPU(sched_yield)
+COMPAT_SYS_SPU(sched_get_priority_max)
+COMPAT_SYS_SPU(sched_get_priority_min)
+COMPAT_SYS_SPU(sched_rr_get_interval)
+COMPAT_SYS_SPU(nanosleep)
+SYSCALL_SPU(mremap)
+SYSCALL_SPU(setresuid)
+SYSCALL_SPU(getresuid)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(poll)
+COMPAT_SYS(nfsservctl)
+SYSCALL_SPU(setresgid)
+SYSCALL_SPU(getresgid)
+COMPAT_SYS_SPU(prctl)
+COMPAT_SYS(rt_sigreturn)
+COMPAT_SYS(rt_sigaction)
+COMPAT_SYS(rt_sigprocmask)
+COMPAT_SYS(rt_sigpending)
+COMPAT_SYS(rt_sigtimedwait)
+COMPAT_SYS(rt_sigqueueinfo)
+COMPAT_SYS(rt_sigsuspend)
+COMPAT_SYS_SPU(pread64)
+COMPAT_SYS_SPU(pwrite64)
+SYSCALL_SPU(chown)
+SYSCALL_SPU(getcwd)
+SYSCALL_SPU(capget)
+SYSCALL_SPU(capset)
+COMPAT_SYS(sigaltstack)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+PPC_SYS(vfork)
+COMPAT_SYS_SPU(getrlimit)
+COMPAT_SYS_SPU(readahead)
+SYS32ONLY(mmap2)
+SYS32ONLY(truncate64)
+SYS32ONLY(ftruncate64)
+SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
+SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
+SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
+SYSCALL(pciconfig_read)
+SYSCALL(pciconfig_write)
+SYSCALL(pciconfig_iobase)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(getdents64)
+SYSCALL_SPU(pivot_root)
+SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
+SYSCALL_SPU(madvise)
+SYSCALL_SPU(mincore)
+SYSCALL_SPU(gettid)
+SYSCALL_SPU(tkill)
+SYSCALL_SPU(setxattr)
+SYSCALL_SPU(lsetxattr)
+SYSCALL_SPU(fsetxattr)
+SYSCALL_SPU(getxattr)
+SYSCALL_SPU(lgetxattr)
+SYSCALL_SPU(fgetxattr)
+SYSCALL_SPU(listxattr)
+SYSCALL_SPU(llistxattr)
+SYSCALL_SPU(flistxattr)
+SYSCALL_SPU(removexattr)
+SYSCALL_SPU(lremovexattr)
+SYSCALL_SPU(fremovexattr)
+COMPAT_SYS_SPU(futex)
+COMPAT_SYS_SPU(sched_setaffinity)
+COMPAT_SYS_SPU(sched_getaffinity)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYS32ONLY(sendfile64)
+COMPAT_SYS_SPU(io_setup)
+SYSCALL_SPU(io_destroy)
+COMPAT_SYS_SPU(io_getevents)
+COMPAT_SYS_SPU(io_submit)
+SYSCALL_SPU(io_cancel)
+SYSCALL(set_tid_address)
+SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
+SYSCALL(exit_group)
+SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
+SYSCALL_SPU(epoll_create)
+SYSCALL_SPU(epoll_ctl)
+SYSCALL_SPU(epoll_wait)
+SYSCALL_SPU(remap_file_pages)
+SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create)
+COMPAT_SYS_SPU(timer_settime)
+COMPAT_SYS_SPU(timer_gettime)
+SYSCALL_SPU(timer_getoverrun)
+SYSCALL_SPU(timer_delete)
+COMPAT_SYS_SPU(clock_settime)
+COMPAT_SYS_SPU(clock_gettime)
+COMPAT_SYS_SPU(clock_getres)
+COMPAT_SYS_SPU(clock_nanosleep)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
+COMPAT_SYS_SPU(tgkill)
+COMPAT_SYS_SPU(utimes)
+COMPAT_SYS_SPU(statfs64)
+COMPAT_SYS_SPU(fstatfs64)
+SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+PPC_SYS_SPU(rtas)
+OLDSYS(debug_setcontext)
+SYSCALL(ni_syscall)
+COMPAT_SYS(migrate_pages)
+COMPAT_SYS(mbind)
+COMPAT_SYS(get_mempolicy)
+COMPAT_SYS(set_mempolicy)
+COMPAT_SYS(mq_open)
+SYSCALL(mq_unlink)
+COMPAT_SYS(mq_timedsend)
+COMPAT_SYS(mq_timedreceive)
+COMPAT_SYS(mq_notify)
+COMPAT_SYS(mq_getsetattr)
+COMPAT_SYS(kexec_load)
+COMPAT_SYS(add_key)
+COMPAT_SYS(request_key)
+COMPAT_SYS(keyctl)
+COMPAT_SYS(waitid)
+COMPAT_SYS(ioprio_set)
+COMPAT_SYS(ioprio_get)
+SYSCALL(inotify_init)
+SYSCALL(inotify_add_watch)
+SYSCALL(inotify_rm_watch)
+SYSCALL(spu_run)
+SYSCALL(spu_create)
+COMPAT_SYS(pselect6)
+COMPAT_SYS(ppoll)
+SYSCALL_SPU(unshare)
+SYSCALL_SPU(splice)
+SYSCALL_SPU(tee)
+COMPAT_SYS_SPU(vmsplice)
+COMPAT_SYS_SPU(openat)
+SYSCALL_SPU(mkdirat)
+SYSCALL_SPU(mknodat)
+SYSCALL_SPU(fchownat)
+COMPAT_SYS_SPU(futimesat)
+SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSCALL_SPU(unlinkat)
+SYSCALL_SPU(renameat)
+SYSCALL_SPU(linkat)
+SYSCALL_SPU(symlinkat)
+SYSCALL_SPU(readlinkat)
+SYSCALL_SPU(fchmodat)
+SYSCALL_SPU(faccessat)
+COMPAT_SYS_SPU(get_robust_list)
+COMPAT_SYS_SPU(set_robust_list)
+COMPAT_SYS_SPU(move_pages)
+SYSCALL_SPU(getcpu)
+COMPAT_SYS(epoll_pwait)
+COMPAT_SYS_SPU(utimensat)
+COMPAT_SYS_SPU(signalfd)
+SYSCALL_SPU(timerfd_create)
+SYSCALL_SPU(eventfd)
+COMPAT_SYS_SPU(sync_file_range2)
+COMPAT_SYS(fallocate)
+SYSCALL(subpage_prot)
+COMPAT_SYS_SPU(timerfd_settime)
+COMPAT_SYS_SPU(timerfd_gettime)
+COMPAT_SYS_SPU(signalfd4)
+SYSCALL_SPU(eventfd2)
+SYSCALL_SPU(epoll_create1)
+SYSCALL_SPU(dup3)
+SYSCALL_SPU(pipe2)
+SYSCALL(inotify_init1)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
new file mode 100644
index 000000000000..d6648c143322
--- /dev/null
+++ b/arch/powerpc/include/asm/system.h
@@ -0,0 +1,548 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_SYSTEM_H
+#define _ASM_POWERPC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores.  Lwsync is fine for
+ * rmb(), though. Note that rmb() actually uses a sync on 32-bit
+ * architectures.
+ *
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
+ * on SMP since it is only used to order updates to system memory.
+ */
+#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+
+#ifdef __KERNEL__
+#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
+#ifdef CONFIG_SMP
+
+#ifdef __SUBARCH_HAS_LWSYNC
+#    define SMPWMB      lwsync
+#else
+#    define SMPWMB      eieio
+#endif
+
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif /* CONFIG_SMP */
+
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known.  For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x)	\
+	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
+struct task_struct;
+struct pt_regs;
+
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+	if (unlikely(__ ## __NAME)) \
+		return __ ## __NAME(regs); \
+	return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code);
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR()	0L
+#define _get_L3CR()	0L
+#define _set_L2CR(val)	do { } while(0)
+#define _set_L3CR(val)	do { } while(0)
+#endif
+
+extern void via_cuda_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void disable_kernel_fp(void);
+extern void enable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern int emulate_altivec(struct pt_regs *);
+extern void __giveup_vsx(struct task_struct *);
+extern void giveup_vsx(struct task_struct *);
+extern void enable_kernel_spe(void);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
+
+#ifndef CONFIG_SMP
+extern void discard_lazy_cpu_state(void);
+#else
+static inline void discard_lazy_cpu_state(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_SPE
+extern void flush_spe_to_thread(struct task_struct *);
+#else
+static inline void flush_spe_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern void *cacheable_memcpy(void *, const void *, unsigned int);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern int die(const char *, struct pt_regs *, long);
+extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+#endif /* CONFIG_BOOKE_WDT */
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+	struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+				   struct thread_struct *next);
+
+extern unsigned int rtas_data;
+extern int mem_init_done;	/* set on boot once kmalloc can be called */
+extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern unsigned long memory_limit;
+extern unsigned long klimit;
+
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
+extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__xchg_u64(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__xchg_u64_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+static __always_inline unsigned long
+__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32_local(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64_local(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define xchg_local(ptr,x)						     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
+     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
+  })
+
+/*
+ * Compare and exchange - if *p == old, set it to new,
+ * and return the old value of *p.
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __always_inline unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+static __always_inline unsigned long
+__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_local(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_local(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+
+#define cmpxchg_local(ptr, o, n)					 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#ifdef CONFIG_PPC64
+/*
+ * We handle most unaligned accesses in hardware. On the other hand 
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	0
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#define arch_align_stack(x) (x)
+
+/* Used in very early kernel initialization. */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+extern struct dentry *powerpc_debugfs_root;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
new file mode 100644
index 000000000000..f663634cccc9
--- /dev/null
+++ b/arch/powerpc/include/asm/tce.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TCE_H
+#define _ASM_POWERPC_TCE_H
+#ifdef __KERNEL__
+
+#include <asm/iommu.h>
+
+/*
+ * Tces come in two formats, one for the virtual bus and a different
+ * format for PCI
+ */
+#define TCE_VB  0
+#define TCE_PCI 1
+
+/* TCE page size is 4096 bytes (1 << 12) */
+
+#define TCE_SHIFT	12
+#define TCE_PAGE_SIZE	(1 << TCE_SHIFT)
+
+#define TCE_ENTRY_SIZE		8		/* each TCE is 64 bits */
+
+#define TCE_RPN_MASK		0xfffffffffful  /* 40-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT		12
+#define TCE_VALID		0x800		/* TCE valid */
+#define TCE_ALLIO		0x400		/* TCE valid for all lpars */
+#define TCE_PCI_WRITE		0x2		/* write from PCI allowed */
+#define TCE_PCI_READ		0x1		/* read from PCI allowed */
+#define TCE_VB_WRITE		0x1		/* write from VB allowed */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_TCE_H */
diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h
new file mode 100644
index 000000000000..6698188ca550
--- /dev/null
+++ b/arch/powerpc/include/asm/termbits.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_POWERPC_TERMBITS_H
+#define _ASM_POWERPC_TERMBITS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* For PowerPC the termios and ktermios are the same */
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 	         0
+#define VQUIT 	         1
+#define VERASE 	         2
+#define VKILL	         3
+#define VEOF	         4
+#define VMIN	         5
+#define VEOL	         6
+#define VTIME	         7
+#define VEOL2	         8
+#define VSWTC	         9
+#define VWERASE 	10
+#define VREPRINT	11
+#define VSUSP 		12
+#define VSTART		13
+#define VSTOP		14
+#define VLNEXT		15
+#define VDISCARD	16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define	IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define   XTABS	00006000	/* required by POSIX to == TAB3 */
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+
+/* c_cflag bit meaning */
+#define CBAUD	0000377
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define  EXTA   B19200
+#define  EXTB   B38400
+#define  CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+#define   BOTHER  00037
+
+#define CIBAUD	077600000
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* _ASM_POWERPC_TERMBITS_H */
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
new file mode 100644
index 000000000000..2c14fea07c8a
--- /dev/null
+++ b/arch/powerpc/include/asm/termios.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_POWERPC_TERMIOS_H
+#define _ASM_POWERPC_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+#ifdef __KERNEL__
+/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
+#endif
+
+#ifdef __KERNEL__
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_TERMIOS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
new file mode 100644
index 000000000000..9665a26a253a
--- /dev/null
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -0,0 +1,161 @@
+/* thread_info.h: PowerPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_POWERPC_THREAD_INFO_H
+#define _ASM_POWERPC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* We have 8k stacks on ppc32 and 16k on ppc64 */
+
+#ifdef CONFIG_PPC64
+#define THREAD_SHIFT		14
+#else
+#define THREAD_SHIFT		13
+#endif
+
+#define THREAD_SIZE		(1 << THREAD_SHIFT)
+
+#ifndef __ASSEMBLY__
+#include <linux/cache.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	int		cpu;			/* cpu we're on */
+	int		preempt_count;		/* 0 => preemptable,
+						   <0 => BUG */
+	struct restart_block restart_block;
+	unsigned long	local_flags;		/* private flags for thread */
+
+	/* low level flags - has atomic operations done on it */
+	unsigned long	flags ____cacheline_aligned_in_smp;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.flags =	0,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* thread information allocation */
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+#else /* THREAD_SHIFT < PAGE_SHIFT */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
+extern void free_thread_info(struct thread_info *ti);
+
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("r1");
+
+	/* gcc4, at least, is smart enough to turn this into a single
+	 * rlwinm for ppc32 and clrrdi for ppc64 */
+	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_32BIT		4	/* 32 bit binary */
+#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
+#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SINGLESTEP		8	/* singlestepping active */
+#define TIF_MEMDIE		9
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
+#define TIF_NOERROR		12	/* Force successful syscall return */
+#define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
+#define TIF_FREEZE		14	/* Freezing for suspend */
+#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
+#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
+#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
+#define _TIF_NOERROR		(1<<TIF_NOERROR)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
+
+#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
+#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
+
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
+#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
+
+#define _TLF_NAPPING		(1 << TLF_NAPPING)
+#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->local_flags |= _TLF_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
new file mode 100644
index 000000000000..febd581ec9b0
--- /dev/null
+++ b/arch/powerpc/include/asm/time.h
@@ -0,0 +1,255 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __POWERPC_TIME_H
+#define __POWERPC_TIME_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+#include <asm/processor.h>
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/paca.h>
+#include <asm/firmware.h>
+#include <asm/iseries/hv_call.h>
+#endif
+
+/* time.c */
+extern unsigned long tb_ticks_per_jiffy;
+extern unsigned long tb_ticks_per_usec;
+extern unsigned long tb_ticks_per_sec;
+extern u64 tb_to_xs;
+extern unsigned      tb_to_us;
+
+struct rtc_time;
+extern void to_tm(int tim, struct rtc_time * tm);
+extern void GregorianDay(struct rtc_time *tm);
+extern time_t last_rtc_update;
+
+extern void generic_calibrate_decr(void);
+extern void wakeup_decrementer(void);
+extern void snapshot_timebase(void);
+
+extern void set_dec_cpu6(unsigned int val);
+
+/* Some sane defaults: 125 MHz timebase, 1GHz processor */
+extern unsigned long ppc_proc_freq;
+#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
+extern unsigned long ppc_tb_freq;
+#define DEFAULT_TB_FREQ		125000000UL
+
+/*
+ * By putting all of this stuff into a single struct we 
+ * reduce the number of cache lines touched by do_gettimeofday.
+ * Both by collecting all of the data in one cache line and
+ * by touching only one TOC entry on ppc64.
+ */
+struct gettimeofday_vars {
+	u64 tb_to_xs;
+	u64 stamp_xsec;
+	u64 tb_orig_stamp;
+};
+
+struct gettimeofday_struct {
+	unsigned long tb_ticks_per_sec;
+	struct gettimeofday_vars vars[2];
+	struct gettimeofday_vars * volatile varp;
+	unsigned      var_idx;
+	unsigned      tb_to_us;
+};
+
+struct div_result {
+	u64 result_high;
+	u64 result_low;
+};
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+#define __USE_RTC()	(!cpu_has_feature(CPU_FTR_USE_TB))
+#else
+#define __USE_RTC()	0
+#endif
+
+#ifdef CONFIG_PPC64
+
+/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
+#define get_tbl		get_tb
+
+#else
+
+static inline unsigned long get_tbl(void)
+{
+#if defined(CONFIG_403GCX)
+	unsigned long tbl;
+	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+	return tbl;
+#else
+	return mftbl();
+#endif
+}
+
+static inline unsigned int get_tbu(void)
+{
+#ifdef CONFIG_403GCX
+	unsigned int tbu;
+	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
+	return tbu;
+#else
+	return mftbu();
+#endif
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline unsigned int get_rtcl(void)
+{
+	unsigned int rtcl;
+
+	asm volatile("mfrtcl %0" : "=r" (rtcl));
+	return rtcl;
+}
+
+static inline u64 get_rtc(void)
+{
+	unsigned int hi, lo, hi2;
+
+	do {
+		asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2"
+			     : "=r" (hi), "=r" (lo), "=r" (hi2));
+	} while (hi2 != hi);
+	return (u64)hi * 1000000000 + lo;
+}
+
+#ifdef CONFIG_PPC64
+static inline u64 get_tb(void)
+{
+	return mftb();
+}
+#else /* CONFIG_PPC64 */
+static inline u64 get_tb(void)
+{
+	unsigned int tbhi, tblo, tbhi2;
+
+	do {
+		tbhi = get_tbu();
+		tblo = get_tbl();
+		tbhi2 = get_tbu();
+	} while (tbhi != tbhi2);
+
+	return ((u64)tbhi << 32) | tblo;
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline u64 get_tb_or_rtc(void)
+{
+	return __USE_RTC() ? get_rtc() : get_tb();
+}
+
+static inline void set_tb(unsigned int upper, unsigned int lower)
+{
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, upper);
+	mtspr(SPRN_TBWL, lower);
+}
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer.  I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode.  The problem is PIT stops counting when it
+ * hits zero.  If it would wrap, we could use it just like a decrementer.
+ */
+static inline unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+	return (mfspr(SPRN_PIT));
+#else
+	return (mfspr(SPRN_DEC));
+#endif
+}
+
+/*
+ * Note: Book E and 4xx processors differ from other PowerPC processors
+ * in when the decrementer generates its interrupt: on the 1 to 0
+ * transition for Book E/4xx, but on the 0 to -1 transition for others.
+ */
+static inline void set_dec(int val)
+{
+#if defined(CONFIG_40x)
+	mtspr(SPRN_PIT, val);
+#elif defined(CONFIG_8xx_CPU6)
+	set_dec_cpu6(val - 1);
+#else
+#ifndef CONFIG_BOOKE
+	--val;
+#endif
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES) &&
+			get_lppaca()->shared_proc) {
+		get_lppaca()->virtual_decr = val;
+		if (get_dec() > val)
+			HvCall_setVirtualDecr();
+		return;
+	}
+#endif
+	mtspr(SPRN_DEC, val);
+#endif /* not 40x or 8xx_CPU6 */
+}
+
+static inline unsigned long tb_ticks_since(unsigned long tstamp)
+{
+	if (__USE_RTC()) {
+		int delta = get_rtcl() - (unsigned int) tstamp;
+		return delta < 0 ? delta + 1000000000 : delta;
+	}
+	return get_tbl() - tstamp;
+}
+
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+#ifdef CONFIG_PPC64
+#define mulhdu(x,y) \
+({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+#else
+extern u64 mulhdu(u64, u64);
+#endif
+
+extern void smp_space_timers(unsigned int);
+
+extern unsigned mulhwu_scale_factor(unsigned, unsigned);
+extern void div128_by_32(u64 dividend_high, u64 dividend_low,
+			 unsigned divisor, struct div_result *dr);
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+        u64 current_tb;  /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
+extern void calculate_steal_time(void);
+extern void snapshot_timebases(void);
+#define account_process_vtime(tsk)		account_process_tick(tsk, 0)
+#else
+#define calculate_steal_time()			do { } while (0)
+#define snapshot_timebases()			do { } while (0)
+#define account_process_vtime(tsk)		do { } while (0)
+#endif
+
+extern void secondary_cpu_time_init(void);
+extern void iSeries_time_init_early(void);
+
+#endif /* __KERNEL__ */
+#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
new file mode 100644
index 000000000000..c55e14f7ef44
--- /dev/null
+++ b/arch/powerpc/include/asm/timex.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_TIMEX_H
+#define _ASM_POWERPC_TIMEX_H
+
+#ifdef __KERNEL__
+
+/*
+ * PowerPC architecture timex specifications
+ */
+
+#include <asm/cputable.h>
+#include <asm/reg.h>
+
+#define CLOCK_TICK_RATE	1024000 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+#ifdef __powerpc64__
+	return mftb();
+#else
+	cycles_t ret;
+
+	/*
+	 * For the "cycle" counter we use the timebase lower half.
+	 * Currently only used on SMP.
+	 */
+
+	ret = 0;
+
+	__asm__ __volatile__(
+		"97:	mftb %0\n"
+		"99:\n"
+		".section __ftr_fixup,\"a\"\n"
+		".align 2\n"
+		"98:\n"
+		"	.long %1\n"
+		"	.long 0\n"
+		"	.long 97b-98b\n"
+		"	.long 99b-98b\n"
+		"	.long 0\n"
+		"	.long 0\n"
+		".previous"
+		: "=r" (ret) : "i" (CPU_FTR_601));
+	return ret;
+#endif
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TIMEX_H */
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
new file mode 100644
index 000000000000..e20ff7541f36
--- /dev/null
+++ b/arch/powerpc/include/asm/tlb.h
@@ -0,0 +1,81 @@
+/*
+ *	TLB shootdown specifics for powerpc
+ *
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_TLB_H
+#define _ASM_POWERPC_TLB_H
+#ifdef __KERNEL__
+
+#ifndef __powerpc64__
+#include <asm/pgtable.h>
+#endif
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#ifndef __powerpc64__
+#include <asm/page.h>
+#include <asm/mmu.h>
+#endif
+
+#include <linux/pagemap.h>
+
+struct mmu_gather;
+
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#if !defined(CONFIG_PPC_STD_MMU)
+
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+#elif defined(__powerpc64__)
+
+extern void pte_free_finish(void);
+
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+	/* If there's a TLB batch pending, then we must flush it because the
+	 * pages are going to be freed and we really don't want to have a CPU
+	 * access a freed page because it has a stale TLB
+	 */
+	if (tlbbatch->index)
+		__flush_tlb_pending(tlbbatch);
+
+	pte_free_finish();
+}
+
+#else
+
+extern void tlb_flush(struct mmu_gather *tlb);
+
+#endif
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+#else
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					unsigned long address)
+{
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(tlb->mm, ptep, address);
+}
+
+#endif
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..361cd5c7a32b
--- /dev/null
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_TLBFLUSH_H
+#define _ASM_POWERPC_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+/*
+ * TLB flushing for software loaded TLB chips
+ *
+ * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
+ * flush_tlb_kernel_range are best implemented as tlbia vs
+ * specific tlbie's
+ */
+
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
+
+#if defined(CONFIG_40x) || defined(CONFIG_8xx)
+#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
+#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
+extern void _tlbia(void);
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	_tlbia();
+}
+
+#elif defined(CONFIG_PPC32)
+/*
+ * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
+ */
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#else
+/*
+ * TLB flushing for 64-bit has-MMU CPUs
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct ppc64_tlb_batch {
+	int			active;
+	unsigned long		index;
+	struct mm_struct	*mm;
+	real_pte_t		pte[PPC64_TLB_BATCH_NR];
+	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
+	unsigned int		psize;
+	int			ssize;
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+
+#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	batch->active = 1;
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	batch->active = 0;
+}
+
+#define arch_flush_lazy_mmu_mode()      do {} while (0)
+
+
+extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
+			    int ssize, int local);
+extern void flush_hash_range(unsigned long number, int local);
+
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+}
+
+/* Private function for use by PCI IO mapping code */
+extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+				     unsigned long end);
+
+
+#endif
+
+#endif /*__KERNEL__ */
+#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
new file mode 100644
index 000000000000..c32da6f97999
--- /dev/null
+++ b/arch/powerpc/include/asm/topology.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_TOPOLOGY_H
+#define _ASM_POWERPC_TOPOLOGY_H
+#ifdef __KERNEL__
+
+
+struct sys_device;
+struct device_node;
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+int of_node_to_nid(struct device_node *device);
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *bus);
+#else
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+/* sched_domains SD_NODE_INIT for PPC64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+extern void __init dump_numa_cpu_topology(void);
+
+extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+
+#else
+
+static inline int of_node_to_nid(struct device_node *device)
+{
+	return 0;
+}
+
+static inline void dump_numa_cpu_topology(void) {}
+
+static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+						int nid)
+{
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#include <asm/cputable.h>
+#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
+
+#ifdef CONFIG_PPC64
+#include <asm/smp.h>
+
+#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_siblings(cpu)	(per_cpu(cpu_core_map, cpu))
+#define topology_core_id(cpu)		(cpu_to_core_id(cpu))
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h
new file mode 100644
index 000000000000..f8b60793b7a9
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108.h
@@ -0,0 +1,121 @@
+/*
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ *	   Alex Bounine (alexandreb@tundra.com)
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE		(0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE		0x1000
+#define TSI108_PCI_SIZE		0x1000
+#define TSI108_CLK_SIZE		0x1000
+#define TSI108_PB_SIZE		0x1000
+#define TSI108_SD_SIZE		0x1000
+#define TSI108_DMA_SIZE		0x1000
+#define TSI108_ETH_SIZE		0x1000
+#define TSI108_I2C_SIZE		0x400
+#define TSI108_MPIC_SIZE	0x400
+#define TSI108_UART0_SIZE	0x200
+#define TSI108_GPIO_SIZE	0x200
+#define TSI108_UART1_SIZE	0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET	0x0000
+#define TSI108_PCI_OFFSET	0x1000
+#define TSI108_CLK_OFFSET	0x2000
+#define TSI108_PB_OFFSET	0x3000
+#define TSI108_SD_OFFSET	0x4000
+#define TSI108_DMA_OFFSET	0x5000
+#define TSI108_ETH_OFFSET	0x6000
+#define TSI108_I2C_OFFSET	0x7000
+#define TSI108_MPIC_OFFSET	0x7400
+#define TSI108_UART0_OFFSET	0x7800
+#define TSI108_GPIO_OFFSET	0x7A00
+#define TSI108_UART1_OFFSET	0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR		(0x004)
+#define TSI108_PCI_IRP_CFG_CTL	(0x180)
+#define TSI108_PCI_IRP_STAT	(0x184)
+#define TSI108_PCI_IRP_ENABLE	(0x188)
+#define TSI108_PCI_IRP_INTAD	(0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS	(0x234)
+
+#define TSI108_PB_ISR		(0x00C)
+#define TSI108_PB_ERRCS		(0x404)
+#define TSI108_PB_AERR		(0x408)
+
+#define TSI108_PB_ERRCS_ES		(1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
+
+#define TSI108_PCI_CFG_SIZE		(0x01000000)
+
+/*
+ * PHY Configuration Options
+ *
+ * Specify "bcm54xx" in the compatible property of your device tree phy
+ * nodes if your board uses the Broadcom PHYs
+ */
+#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
+#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
+
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+	u32 regs;		/* hw registers base address */
+	u32 phyregs;		/* phy registers base address */
+	u16 phy;		/* phy address */
+	u16 irq_num;		/* irq number */
+	u8 mac_addr[6];		/* phy mac address */
+	u16 phy_type;	/* type of phy on board */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+static inline u32 tsi108_read_reg(u32 reg_offset)
+{
+	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+static inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif				/* __PPC_KERNEL_TSI108_H */
diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h
new file mode 100644
index 000000000000..6ed93979fbe4
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_POWERPC_TSI108_IRQ_H
+#define _ASM_POWERPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE		0
+#endif
+
+#define TSI108_IRQ(x)		(TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS	(36 + 4)	/* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO	0xF
+
+#define TSI108_IRQ_SPURIOUS	(TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL	10	/* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0	TSI108_IRQ(0)	/* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1	TSI108_IRQ(1)	/* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2	TSI108_IRQ(2)	/* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3	TSI108_IRQ(3)	/* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0	TSI108_IRQ(4)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1	TSI108_IRQ(5)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2	TSI108_IRQ(6)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3	TSI108_IRQ(7)	/* Reserved IRQ */
+#define IRQ_TSI108_DMA0		TSI108_IRQ(8)	/* DMA0 */
+#define IRQ_TSI108_DMA1		TSI108_IRQ(9)	/* DMA1 */
+#define IRQ_TSI108_DMA2		TSI108_IRQ(10)	/* DMA2 */
+#define IRQ_TSI108_DMA3		TSI108_IRQ(11)	/* DMA3 */
+#define IRQ_TSI108_UART0	TSI108_IRQ(12)	/* UART0 */
+#define IRQ_TSI108_UART1	TSI108_IRQ(13)	/* UART1 */
+#define IRQ_TSI108_I2C		TSI108_IRQ(14)	/* I2C */
+#define IRQ_TSI108_GPIO		TSI108_IRQ(15)	/* GPIO */
+#define IRQ_TSI108_GIGE0	TSI108_IRQ(16)	/* GIGE0 */
+#define IRQ_TSI108_GIGE1	TSI108_IRQ(17)	/* GIGE1 */
+#define IRQ_TSI108_RESERVED4	TSI108_IRQ(18)	/* Reserved IRQ */
+#define IRQ_TSI108_HLP		TSI108_IRQ(19)	/* HLP */
+#define IRQ_TSI108_SDRAM	TSI108_IRQ(20)	/* SDC */
+#define IRQ_TSI108_PROC_IF	TSI108_IRQ(21)	/* Processor IF */
+#define IRQ_TSI108_RESERVED5	TSI108_IRQ(22)	/* Reserved IRQ */
+#define IRQ_TSI108_PCI		TSI108_IRQ(23)	/* PCI/X block */
+
+#define IRQ_TSI108_MBOX0	TSI108_IRQ(24)	/* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1	TSI108_IRQ(25)	/* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2	TSI108_IRQ(26)	/* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3	TSI108_IRQ(27)	/* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0	TSI108_IRQ(28)	/* Doorbell 0 */
+#define IRQ_TSI108_DBELL1	TSI108_IRQ(29)	/* Doorbell 1 */
+#define IRQ_TSI108_DBELL2	TSI108_IRQ(30)	/* Doorbell 2 */
+#define IRQ_TSI108_DBELL3	TSI108_IRQ(31)	/* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0	TSI108_IRQ(32)	/* Global Timer 0 */
+#define IRQ_TSI108_TIMER1	TSI108_IRQ(33)	/* Global Timer 1 */
+#define IRQ_TSI108_TIMER2	TSI108_IRQ(34)	/* Global Timer 2 */
+#define IRQ_TSI108_TIMER3	TSI108_IRQ(35)	/* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE	TSI108_IRQ(36)
+#define IRQ_PCI_INTA		(IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB		(IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC		(IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD		(IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS		(4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE	(TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0		0x1
+#define IDIR_INT_OUT1		0x2
+#define IDIR_INT_OUT2		0x4
+#define IDIR_INT_OUT3		0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+	TSI108_IRQ_DIRECTED,
+	TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif				/*  _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/arch/powerpc/include/asm/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h
new file mode 100644
index 000000000000..5653d7cc3e24
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_pci.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2007 IBM Corp
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TSI108_PCI_H
+#define _ASM_POWERPC_TSI108_PCI_H
+
+#include <asm/tsi108.h>
+
+/* Register definitions */
+#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
+#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
+#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
+#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
+#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
+#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
+#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
+#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
+#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
+#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
+#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
+#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
+
+extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
+extern void tsi108_pci_int_init(struct device_node *node);
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
+extern void tsi108_clear_pci_cfg_error(void);
+
+#endif				/*  _ASM_POWERPC_TSI108_PCI_H */
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
new file mode 100644
index 000000000000..d3374bc865ba
--- /dev/null
+++ b/arch/powerpc/include/asm/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_TYPES_H
+#define _ASM_POWERPC_TYPES_H
+
+#ifdef __powerpc64__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+typedef unsigned int umode_t;
+#else
+typedef unsigned short umode_t;
+#endif
+
+typedef struct {
+	__u32 u[4];
+} __attribute__((aligned(16))) __vector128;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __powerpc64__
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef __vector128 vector128;
+
+/* Physical address used by some IO functions */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
+#ifdef __powerpc64__
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+typedef struct {
+	unsigned long entry;
+	unsigned long toc;
+	unsigned long env;
+} func_descr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
new file mode 100644
index 000000000000..bd0fb8495154
--- /dev/null
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -0,0 +1,496 @@
+#ifndef _ARCH_POWERPC_UACCESS_H
+#define _ARCH_POWERPC_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#ifdef __powerpc64__
+/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE_USER64 - 1)
+#else
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#ifdef __powerpc64__
+/*
+ * This check is sufficient because there is a large enough
+ * gap between user addresses and the kernel addresses
+ */
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) && ((size) <= (segment).seg))
+
+#else
+
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) &&		\
+	 (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
+
+#endif
+
+#define access_ok(type, addr, size)		\
+	(__chk_user_ptr(addr),			\
+	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that
+ * allow access of 64-bit data. The "get_user" functions do not
+ * properly handle 64-bit data because the value gets down cast to a long.
+ * The "put_user" functions already handle 64-bit data properly but we add
+ * "user64" versions for completeness
+ */
+#define get_user(x, ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#ifndef __powerpc64__
+#define __get_user64(x, ptr) \
+	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user64(x, ptr) __put_user(x, ptr)
+#endif
+
+#define __get_user_inatomic(x, ptr) \
+	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
+#define __put_user_inatomic(x, ptr) \
+	__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+extern long __put_user_bad(void);
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	" op " %1,0(%2)	# put_user\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,3b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __put_user_asm2(x, ptr, retval)				\
+	  __put_user_asm(x, ptr, retval, "std")
+#else /* __powerpc64__ */
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	stw %1,0(%2)\n"				\
+		"2:	stw %1+1,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	li %0,%3\n"				\
+		"	b 3b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,4b\n"			\
+			PPC_LONG "2b,4b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __put_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
+	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
+	  case 4: __put_user_asm(x, ptr, retval, "stw"); break;	\
+	  case 8: __put_user_asm2(x, ptr, retval); break;	\
+	  default: __put_user_bad();				\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	if (!is_kernel_addr((unsigned long)__pu_addr))		\
+		might_sleep();					\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
+		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;							\
+})
+
+#define __put_user_nosleep(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+
+extern long __get_user_bad(void);
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)	# get_user\n"	\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __get_user_asm2(x, addr, err)			\
+	__get_user_asm(x, addr, err, "ld")
+#else /* __powerpc64__ */
+#define __get_user_asm2(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"1:	lwz %1,0(%2)\n"			\
+		"2:	lwz %1+1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	li %1+1,0\n"			\
+		"	b 3b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,4b\n"		\
+			PPC_LONG "2b,4b\n"		\
+		".previous"				\
+		: "=r" (err), "=&r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	__chk_user_ptr(ptr);					\
+	if (size > sizeof(x))					\
+		(x) = __get_user_bad();				\
+	switch (size) {						\
+	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
+	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
+	case 4: __get_user_asm(x, ptr, retval, "lwz"); break;	\
+	case 8: __get_user_asm2(x, ptr, retval);  break;	\
+	default: (x) = __get_user_bad();			\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#ifndef __powerpc64__
+#define __get_user64_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	long long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+#endif /* __powerpc64__ */
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long  __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	might_sleep();							\
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_nosleep(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+
+/* more complex routines */
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#ifndef __powerpc64__
+
+static inline unsigned long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_tofrom_user((__force void __user *)to, from, n);
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + n - TASK_SIZE;
+		return __copy_tofrom_user((__force void __user *)to, from,
+				n - over) + over;
+	}
+	return n;
+}
+
+static inline unsigned long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_tofrom_user(to, (__force void __user *)from, n);
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + n - TASK_SIZE;
+		return __copy_tofrom_user(to, (__force void __user *)from,
+				n - over) + over;
+	}
+	return n;
+}
+
+#else /* __powerpc64__ */
+
+#define __copy_in_user(to, from, size) \
+	__copy_tofrom_user((to), (from), (size))
+
+extern unsigned long copy_from_user(void *to, const void __user *from,
+				    unsigned long n);
+extern unsigned long copy_to_user(void __user *to, const void *from,
+				  unsigned long n);
+extern unsigned long copy_in_user(void __user *to, const void __user *from,
+				  unsigned long n);
+
+#endif /* __powerpc64__ */
+
+static inline unsigned long __copy_from_user_inatomic(void *to,
+		const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret);
+			break;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret);
+			break;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret);
+			break;
+		case 8:
+			__get_user_size(*(u64 *)to, from, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long __copy_to_user_inatomic(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+			break;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+			break;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+			break;
+		case 8:
+			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+
+static inline unsigned long __copy_from_user(void *to,
+		const void __user *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_from_user_inatomic(to, from, size);
+}
+
+static inline unsigned long __copy_to_user(void __user *to,
+		const void *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_to_user_inatomic(to, from, size);
+}
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline unsigned long clear_user(void __user *addr, unsigned long size)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		return __clear_user(addr, size);
+	if ((unsigned long)addr < TASK_SIZE) {
+		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+		return __clear_user(addr, size - over) + over;
+	}
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dst, const char __user *src,
+		long count)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, src, 1)))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+static inline int strnlen_user(const char __user *str, long len)
+{
+	unsigned long top = current->thread.fs.seg;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len, top);
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
new file mode 100644
index 000000000000..46b09ba6bead
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM	8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed   - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif				/* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
new file mode 100644
index 000000000000..839aab8bf37d
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -0,0 +1,244 @@
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_F	0x04000000	/* first */
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN			4
+#define UCC_FAST_MRBLR_ALIGNMENT		4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL				0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+	UCC_FAST_16_BIT_CRC = 0x00000000,
+	UCC_FAST_CRC_RESERVED0 = 0x00000040,
+	UCC_FAST_32_BIT_CRC = 0x00000080,
+	UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+	int ucc_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	u32 regs;
+	int irq;
+	u32 uccm_mask;
+	int bd_mem_part;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int tci;
+	int txsy;
+	int rtsm;
+	int revd;
+	int rsyn;
+	u16 max_rx_buf_length;
+	u16 urfs;
+	u16 urfet;
+	u16 urfset;
+	u16 utfs;
+	u16 utfet;
+	u16 utftt;
+	u16 ufpt;
+	enum ucc_fast_channel_protocol_mode mode;
+	enum ucc_fast_transparent_txrx ttx_trx;
+	enum ucc_fast_tx_encoding_method tenc;
+	enum ucc_fast_rx_decoding_method renc;
+	enum ucc_fast_transparent_tcrc tcrc;
+	enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+	struct ucc_fast_info *uf_info;
+	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
+#endif
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+						    virtual fifo */
+	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+						    virtual fifo */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counter. */
+	u32 rx_frames;		/* Received frames counter (only frames
+				   passed to application). */
+	u32 tx_discarded;	/* Discarded tx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+	u32 rx_discarded;	/* Discarded rx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+#endif				/* STATISTICS */
+	u16 mrblr;		/* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info  - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif				/* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
new file mode 100644
index 000000000000..0980e6ad335b
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_slow.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_PAD	0x40000000	/* add pads to short frames */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+#define T_A	0x04000000	/* Address - the data transmitted as address
+				   chars */
+#define T_TC	0x04000000	/* transmit CRC */
+#define T_CM	0x02000000	/* continuous mode */
+#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
+#define T_P	0x01000000	/* Preamble - send Preamble sequence before
+				   data */
+#define T_HB	0x01000000	/* heartbeat */
+#define T_NS	0x00800000	/* No Stop */
+#define T_LC	0x00800000	/* late collision */
+#define T_RL	0x00400000	/* retransmission limit */
+#define T_UN	0x00020000	/* underrun */
+#define T_CT	0x00010000	/* CTS lost */
+#define T_CSL	0x00010000	/* carrier sense lost */
+#define T_RC	0x003c0000	/* retry count */
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_C	0x08000000	/* the last byte in this buffer is a cntl
+				   char */
+#define R_F	0x04000000	/* first */
+#define R_A	0x04000000	/* the first byte in this buffer is address
+				   byte */
+#define R_CM	0x02000000	/* continuous mode */
+#define R_ID	0x01000000	/* buffer close on reception of idles */
+#define R_M	0x01000000	/* Frame received because of promiscuous
+				   mode */
+#define R_AM	0x00800000	/* Address match */
+#define R_DE	0x00800000	/* Address match */
+#define R_LG	0x00200000	/* Break received */
+#define R_BR	0x00200000	/* Frame length violation */
+#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
+#define R_FR	0x00100000	/* Framing Error (no stop bit) character
+				   received */
+#define R_PR	0x00080000	/* Parity Error character received */
+#define R_AB	0x00080000	/* Frame Aborted */
+#define R_SH	0x00080000	/* frame is too short */
+#define R_CR	0x00040000	/* CRC Error */
+#define R_OV	0x00020000	/* Overrun */
+#define R_CD	0x00010000	/* CD lost */
+#define R_CL	0x00010000	/* this frame is closed because of a
+				   collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN		4
+#define UCC_SLOW_MRBLR_ALIGNMENT	4
+#define UCC_SLOW_PRAM_SIZE		0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+	/* 32-bit CCITT CRC (Ethernet and HDLC) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+	int ucc_num;
+	int protocol;			/* QE_CR_PROTOCOL_xxx */
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	phys_addr_t regs;
+	int irq;
+	u16 uccm_mask;
+	int data_mem_part;
+	int init_tx;
+	int init_rx;
+	u32 tx_bd_ring_len;
+	u32 rx_bd_ring_len;
+	int rx_interrupts;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int rinv;
+	int tinv;
+	int rtsm;
+	int rfw;
+	int tci;
+	int tend;
+	int tfl;
+	int txsy;
+	u16 max_rx_buf_length;
+	enum ucc_slow_transparent_tcrc tcrc;
+	enum ucc_slow_channel_protocol_mode mode;
+	enum ucc_slow_diag_mode diag;
+	enum ucc_slow_tx_oversampling_rate tdcr;
+	enum ucc_slow_rx_oversampling_rate rdcr;
+	enum ucc_slow_tx_encoding_method tenc;
+	enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+	struct ucc_slow_info *us_info;
+	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
+	u32 us_pram_offset;
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	struct list_head confQ;	/* frames passed to chip waiting for tx */
+	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
+				   and length for first BD in a frame */
+	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
+	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
+	struct qe_bd *confBd;	/* next BD for confirm after Tx */
+	struct qe_bd *tx_bd;	/* next BD for new Tx request */
+	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
+	void *p_rx_frame;	/* accumulating receive frame */
+	u16 *p_ucce;		/* a pointer to the event register in memory.
+				 */
+	u16 *p_uccm;		/* a pointer to the mask register in memory */
+	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counters */
+	u32 rx_frames;		/* Received frames counters (only frames
+				   passed to application) */
+	u32 rx_discarded;	/* Discarded frames counters (frames that
+				   were discarded by the driver due to
+				   errors) */
+#endif				/* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info  - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif				/* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/asm/ucontext.h
new file mode 100644
index 000000000000..d9a4ddf0cc86
--- /dev/null
+++ b/arch/powerpc/include/asm/ucontext.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_UCONTEXT_H
+#define _ASM_POWERPC_UCONTEXT_H
+
+#ifdef __powerpc64__
+#include <asm/sigcontext.h>
+#else
+#include <asm/elf.h>
+#endif
+#include <asm/signal.h>
+
+#ifndef __powerpc64__
+struct mcontext {
+	elf_gregset_t	mc_gregs;
+	elf_fpregset_t	mc_fregs;
+	unsigned long	mc_pad[2];
+	elf_vrregset_t	mc_vregs __attribute__((__aligned__(16)));
+};
+#endif
+
+struct ucontext {
+	unsigned long	uc_flags;
+	struct ucontext __user *uc_link;
+	stack_t		uc_stack;
+#ifndef __powerpc64__
+	int		uc_pad[7];
+	struct mcontext	__user *uc_regs;/* points to uc_mcontext field */
+#endif
+	sigset_t	uc_sigmask;
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+#ifdef __powerpc64__
+	sigset_t	__unused[15];	/* Allow for uc_sigmask growth */
+	struct sigcontext uc_mcontext;	/* last for extensibility */
+#else
+	int		uc_maskext[30];
+	int		uc_pad2[3];
+	struct mcontext	uc_mcontext;
+#endif
+};
+
+#endif /* _ASM_POWERPC_UCONTEXT_H */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
new file mode 100644
index 000000000000..6418ceea44b7
--- /dev/null
+++ b/arch/powerpc/include/asm/udbg.h
@@ -0,0 +1,55 @@
+/*
+ * (c) 2001, 2006 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_UDBG_H
+#define _ASM_POWERPC_UDBG_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+
+extern void (*udbg_putc)(char c);
+extern int (*udbg_getc)(void);
+extern int (*udbg_getc_poll)(void);
+
+extern void udbg_puts(const char *s);
+extern int udbg_write(const char *s, int n);
+extern int udbg_read(char *buf, int buflen);
+
+extern void register_early_udbg_console(void);
+extern void udbg_printf(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+extern void udbg_progress(char *s, unsigned short hex);
+
+extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
+			   unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
+					  unsigned int clock);
+
+struct device_node;
+extern void udbg_scc_init(int force_scc);
+extern int udbg_adb_init(int force_btext);
+extern void udbg_adb_init_early(void);
+
+extern void __init udbg_early_init(void);
+extern void __init udbg_init_debug_lpar(void);
+extern void __init udbg_init_pmac_realmode(void);
+extern void __init udbg_init_maple_realmode(void);
+extern void __init udbg_init_pas_realmode(void);
+extern void __init udbg_init_iseries(void);
+extern void __init udbg_init_rtas_panel(void);
+extern void __init udbg_init_rtas_console(void);
+extern void __init udbg_init_debug_beat(void);
+extern void __init udbg_init_btext(void);
+extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
+extern void __init udbg_init_cpm(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h
new file mode 100644
index 000000000000..597edfcae3d6
--- /dev/null
+++ b/arch/powerpc/include/asm/uic.h
@@ -0,0 +1,21 @@
+/*
+ * IBM PPC4xx UIC external definitions and structure.
+ *
+ * Maintainer: David Gibson <dwg@au1.ibm.com>
+ * Copyright 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_UIC_H
+#define _ASM_POWERPC_UIC_H
+
+#ifdef __KERNEL__
+
+extern void __init uic_init_tree(void);
+extern unsigned int uic_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UIC_H */
diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h
new file mode 100644
index 000000000000..5f1b1e3c2137
--- /dev/null
+++ b/arch/powerpc/include/asm/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_POWERPC_UNALIGNED_H
+#define _ASM_POWERPC_UNALIGNED_H
+
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_UNALIGNED_H */
diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h
new file mode 100644
index 000000000000..f737732c3861
--- /dev/null
+++ b/arch/powerpc/include/asm/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ *             from Apple. This chip is used on "Core99" machines
+ *	       This also includes U2 used on more recent MacRISC2/3
+ *             machines and U3 (G5) 
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT		0x48
+#define UNI_N_ADDR_COARSE_MASK		0xffff0000	/* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK		0x0000ffff	/*  16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE		0x8c
+#define UNI_N_CFG_AGP_BASE		0x90
+#define UNI_N_CFG_GART_CTRL		0x94
+#define UNI_N_CFG_INTERNAL_STATUS	0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE	0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL		0x00000001
+#define UNI_N_CFG_GART_ENABLE		0x00000100
+#define UNI_N_CFG_GART_2xRESET		0x00010000
+#define UNI_N_CFG_GART_DISSBADET	0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE		0x00040000
+#define U3_N_CFG_GART_PERFRD		0x00080000
+#define U3_N_CFG_GART_B2BGNT		0x00200000
+#define U3_N_CFG_GART_FASTDDR		0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   UNI_N_CFG_GART_ENABLE
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ *   UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   0
+ *   UNI_N_CFG_GART_2xRESET
+ *   0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION			0x0000		/* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107		0x0003		/* 1.0.7 */
+#define UNI_N_VERSION_10A		0x0007		/* 1.0.10 */
+#define UNI_N_VERSION_150		0x0011		/* 1.5 */
+#define UNI_N_VERSION_200		0x0024		/* 2.0 */
+#define UNI_N_VERSION_PANGEA		0x00C0		/* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID		0x00D2		/* Integrated U2 + K */
+#define UNI_N_VERSION_300		0x0030		/* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL		0x0020
+#define UNI_N_CLOCK_CNTL_PCI		0x00000001	/* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC		0x00000002	/* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW		0x00000004	/* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100		0x00000010	/* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT			0x0030
+#define UNI_N_POWER_MGT_NORMAL		0x00
+#define UNI_N_POWER_MGT_IDLE2		0x01
+#define UNI_N_POWER_MGT_SLEEP		0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL			0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT	15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK	0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY	0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105	0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER		0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ *  to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE		0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING	0x01
+#define UNI_N_HWINIT_STATE_RUNNING	0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY		0x0100
+#define UNI_N_AACK_DELAY_ENABLE		0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0	0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP	0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL	0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49	0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18	0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49	0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18	0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER	0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18	0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32	0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32	0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0	0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1	0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2	0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO	0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0	0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0	0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1	0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2	0x00000008
+#define UNI_N_CLOCK_STOPPED_32		0x00000004
+#define UNI_N_CLOCK_STOPPED_45		0x00000002
+#define UNI_N_CLOCK_STOPPED_49		0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1	0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF	0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL	0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU		0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO	0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2	0x00008000
+#define UNI_N_CLOCK_STOPPED_FW		0x00004000
+#define UNI_N_CLOCK_STOPPED_GB		0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66	0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100	0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX		0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1	0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI	0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI	0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI	0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1	0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP		0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0	0x00000002
+#define UNI_N_CLOCK_STOPPED_18		0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING		0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG			0x00e0
+#define U3_PMC_START_STOP		0x0001
+#define U3_MPIC_RESET			0x0002
+#define U3_MPIC_OUTPUT_ENABLE		0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1		0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE      		0x70000
+#define U3_HT_LINK_COMMAND		0x100
+#define U3_HT_LINK_CONFIG		0x110
+#define U3_HT_LINK_FREQ			0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
new file mode 100644
index 000000000000..e07d0c76ed77
--- /dev/null
+++ b/arch/powerpc/include/asm/unistd.h
@@ -0,0 +1,398 @@
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#ifndef __powerpc64__			/* these are 32-bit only */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#endif
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#ifndef __powerpc64__
+#define __NR_fcntl64		204
+#endif
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#ifndef __powerpc64__
+#define __NR_sendfile64		226
+#endif
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#ifndef __powerpc64__
+#define __NR_fadvise64_64	254
+#endif
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+#define __NR_migrate_pages	258
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
+#define __NR_spu_run		278
+#define __NR_spu_create		279
+#define __NR_pselect6		280
+#define __NR_ppoll		281
+#define __NR_unshare		282
+#define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
+#define __NR_move_pages		301
+#define __NR_getcpu		302
+#define __NR_epoll_pwait	303
+#define __NR_utimensat		304
+#define __NR_signalfd		305
+#define __NR_timerfd_create	306
+#define __NR_eventfd		307
+#define __NR_sync_file_range2	308
+#define __NR_fallocate		309
+#define __NR_subpage_prot	310
+#define __NR_timerfd_settime	311
+#define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
+
+#ifdef __KERNEL__
+
+#define __NR_syscalls		319
+
+#define __NR__exit __NR_exit
+#define NR_syscalls	__NR_syscalls
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#ifdef CONFIG_PPC32
+#define __ARCH_WANT_OLD_STAT
+#endif
+#ifdef CONFIG_PPC64
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_NEWFSTATAT
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(x) \
+	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif		/* __ASSEMBLY__ */
+#endif		/* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h
new file mode 100644
index 000000000000..3fd4545dd74e
--- /dev/null
+++ b/arch/powerpc/include/asm/user.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_POWERPC_USER_H
+#define _ASM_POWERPC_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Adapted from <asm-alpha/user.h>
+ *
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+#endif	/* _ASM_POWERPC_USER_H */
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
new file mode 100644
index 000000000000..26fc449bd989
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso.h
@@ -0,0 +1,78 @@
+#ifndef __PPC64_VDSO_H__
+#define __PPC64_VDSO_H__
+
+#ifdef __KERNEL__
+
+/* Default link addresses for the vDSOs */
+#define VDSO32_LBASE	0x100000
+#define VDSO64_LBASE	0x100000
+
+/* Default map addresses */
+#define VDSO32_MBASE	VDSO32_LBASE
+#define VDSO64_MBASE	VDSO64_LBASE
+
+#define VDSO_VERSION_STRING	LINUX_2.6.15
+
+/* Define if 64 bits VDSO has procedure descriptors */
+#undef VDS64_HAS_DESCRIPTORS
+
+#ifndef __ASSEMBLY__
+
+/* Offsets relative to thread->vdso_base */
+extern unsigned long vdso64_rt_sigtramp;
+extern unsigned long vdso32_sigtramp;
+extern unsigned long vdso32_rt_sigtramp;
+
+#else /* __ASSEMBLY__ */
+
+#ifdef __VDSO64__
+#ifdef VDS64_HAS_DESCRIPTORS
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+        .section ".opd","a";		\
+        .align 3;			\
+	name:				\
+	.quad .name,.TOC.@tocbase,0;	\
+	.previous;			\
+	.globl .name;			\
+	.type .name,@function; 		\
+	.name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size .name,.-.name;
+
+#define V_LOCAL_FUNC(name) (.name)
+
+#else /* VDS64_HAS_DESCRIPTORS */
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* VDS64_HAS_DESCRIPTORS */
+#endif /* __VDSO64__ */
+
+#ifdef __VDSO32__
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	.type name,@function; 		\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* __VDSO32__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC64_VDSO_H__ */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
new file mode 100644
index 000000000000..f01393224b52
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -0,0 +1,121 @@
+#ifndef _VDSO_DATAPAGE_H
+#define _VDSO_DATAPAGE_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
+ * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>,
+ * 		      IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/*
+ * Note about this structure:
+ *
+ * This structure was historically called systemcfg and exposed to
+ * userland via /proc/ppc64/systemcfg. Unfortunately, this became an
+ * ABI issue as some proprietary software started relying on being able
+ * to mmap() it, thus we have to keep the base layout at least for a
+ * few kernel versions.
+ *
+ * However, since ppc32 doesn't suffer from this backward handicap,
+ * a simpler version of the data structure is used there with only the
+ * fields actually used by the vDSO.
+ *
+ */
+
+/*
+ * If the major version changes we are incompatible.
+ * Minor version changes are a hint.
+ */
+#define SYSTEMCFG_MAJOR 1
+#define SYSTEMCFG_MINOR 1
+
+#ifndef __ASSEMBLY__
+
+#include <linux/unistd.h>
+
+#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+
+/*
+ * So here is the ppc64 backward compatible version
+ */
+
+#ifdef CONFIG_PPC64
+
+struct vdso_data {
+	__u8  eye_catcher[16];		/* Eyecatcher: SYSTEMCFG:PPC64	0x00 */
+	struct {			/* Systemcfg version numbers	     */
+		__u32 major;		/* Major number			0x10 */
+		__u32 minor;		/* Minor number			0x14 */
+	} version;
+
+	/* Note about the platform flags: it now only contains the lpar
+	 * bit. The actual platform number is dead and burried
+	 */
+	__u32 platform;			/* Platform flags		0x18 */
+	__u32 processor;		/* Processor type		0x1C */
+	__u64 processorCount;		/* # of physical processors	0x20 */
+	__u64 physicalMemorySize;	/* Size of real memory(B)	0x28 */
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u64 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__u32 dcache_size;		/* L1 d-cache size		0x60 */
+	__u32 dcache_line_size;		/* L1 d-cache line size		0x64 */
+	__u32 icache_size;		/* L1 i-cache size		0x68 */
+	__u32 icache_line_size;		/* L1 i-cache line size		0x6C */
+
+	/* those additional ones don't have to be located anywhere
+	 * special as they were not part of the original systemcfg
+	 */
+	__u32 dcache_block_size;		/* L1 d-cache block size     */
+	__u32 icache_block_size;		/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;		/* L1 d-cache log block size */
+	__u32 icache_log_block_size;		/* L1 i-cache log block size */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+};
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * And here is the simpler 32 bits version
+ */
+struct vdso_data {
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u32 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+	__u32 dcache_block_size;	/* L1 d-cache block size     */
+	__u32 icache_block_size;	/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
+	__u32 icache_log_block_size;	/* L1 i-cache log block size */
+};
+
+#endif /* CONFIG_PPC64 */
+
+#ifdef __KERNEL__
+extern struct vdso_data *vdso_data;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _SYSTEMCFG_H */
diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h
new file mode 100644
index 000000000000..a2eac409c1ec
--- /dev/null
+++ b/arch/powerpc/include/asm/vga.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_POWERPC_VGA_H_
+#define _ASM_POWERPC_VGA_H_
+
+#ifdef __KERNEL__
+
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+
+#include <asm/io.h>
+
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+    st_le16(addr, val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+    return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw	memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+
+#ifdef __powerpc64__
+#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s))
+#else
+#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_VGA_H_ */
diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
new file mode 100644
index 000000000000..0a290a195946
--- /dev/null
+++ b/arch/powerpc/include/asm/vio.h
@@ -0,0 +1,118 @@
+/*
+ * IBM PowerPC Virtual I/O Infrastructure Support.
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *  Dave Engebretsen engebret@us.ibm.com
+ *  Santiago Leon santil@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_VIO_H
+#define _ASM_POWERPC_VIO_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/hvcall.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Architecture-specific constants for drivers to
+ * extract attributes of the device using vio_get_attribute()
+ */
+#define VETH_MAC_ADDR "local-mac-address"
+#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
+
+/* End architecture-specific constants */
+
+#define h_vio_signal(ua, mode) \
+  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
+
+#define VIO_IRQ_DISABLE		0UL
+#define VIO_IRQ_ENABLE		1UL
+
+/*
+ * VIO CMO minimum entitlement for all devices and spare entitlement
+ */
+#define VIO_CMO_MIN_ENT 1562624
+
+struct iommu_table;
+
+/**
+ * vio_dev - This structure is used to describe virtual I/O devices.
+ *
+ * @desired: set from return of driver's get_desired_dma() function
+ * @entitled: bytes of IO data that has been reserved for this device.
+ * @allocated: bytes of IO data currently in use by the device.
+ * @allocs_failed: number of DMA failures due to insufficient entitlement.
+ */
+struct vio_dev {
+	const char *name;
+	const char *type;
+	uint32_t unit_address;
+	unsigned int irq;
+	struct {
+		size_t desired;
+		size_t entitled;
+		size_t allocated;
+		atomic_t allocs_failed;
+	} cmo;
+	struct device dev;
+};
+
+struct vio_driver {
+	const struct vio_device_id *id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	/* A driver must have a get_desired_dma() function to
+	 * be loaded in a CMO environment if it uses DMA.
+	 */
+	unsigned long (*get_desired_dma)(struct vio_dev *dev);
+	struct device_driver driver;
+};
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+extern int vio_cmo_entitlement_update(size_t);
+extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
+
+extern void __devinit vio_unregister_device(struct vio_dev *dev);
+
+struct device_node;
+
+extern struct vio_dev *vio_register_device_node(
+		struct device_node *node_vdev);
+extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
+		int *length);
+#ifdef CONFIG_PPC_PSERIES
+extern struct vio_dev *vio_find_node(struct device_node *vnode);
+extern int vio_enable_interrupts(struct vio_dev *dev);
+extern int vio_disable_interrupts(struct vio_dev *dev);
+#else
+static inline int vio_enable_interrupts(struct vio_dev *dev)
+{
+	return 0;
+}
+#endif
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_VIO_H */
diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h
new file mode 100644
index 000000000000..343612f8fece
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_intc.h
@@ -0,0 +1,20 @@
+/*
+ * Xilinx intc external definitions
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_XILINX_INTC_H
+#define _ASM_POWERPC_XILINX_INTC_H
+
+#ifdef __KERNEL__
+
+extern void __init xilinx_intc_init_tree(void);
+extern unsigned int xilinx_intc_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h
new file mode 100644
index 000000000000..5eb8e599e5cc
--- /dev/null
+++ b/arch/powerpc/include/asm/xmon.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_POWERPC_XMON_H
+#define __ASM_POWERPC_XMON_H
+
+/*
+ * Copyrignt (C) 2006 IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/irqreturn.h>
+
+#ifdef CONFIG_XMON
+extern void xmon_setup(void);
+extern void xmon_register_spus(struct list_head *list);
+struct pt_regs;
+extern int xmon(struct pt_regs *excp);
+extern irqreturn_t xmon_irq(int, void *);
+#else
+static inline void xmon_setup(void) { };
+static inline void xmon_register_spus(struct list_head *list) { };
+#endif
+
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+extern int cpus_are_in_xmon(void);
+#endif
+
+#endif /* __KERNEL __ */
+#endif /* __ASM_POWERPC_XMON_H */
diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/powerpc/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>