powerpc/boot/dts: Remove leading 0x and 0s from bindings notation

Improve the DTS files by removing all the leading "0x" and zeros to
fix the following dtc warnings:

  Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and:

  Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

  find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +

For simplicity, two sed expressions were used to solve each warnings
separately.

To make the regex expression more robust a few other issues were
resolved, namely setting unit-address to lower case, and adding a
whitespace before the the opening curly brace:

  https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove
leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

10 files changed, 38 insertions, 38 deletions

diff --git a/arch/powerpc/boot/dts/fsl/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
index 01706a339603..bc3e8039bdc7 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
@@ -126,7 +126,7 @@
 		par_io@e0100 {
 			num-ports = <7>;
 
-			pio1: ucc_pin@01 {
+			pio1: ucc_pin@1 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
@@ -154,7 +154,7 @@
 					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
 			};
 
-			pio2: ucc_pin@02 {
+			pio2: ucc_pin@2 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
@@ -228,22 +228,22 @@
 
 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
-			qe_phy0: ethernet-phy@07 {
+			qe_phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1 0 0>;
 				reg = <0x7>;
 			};
-			qe_phy1: ethernet-phy@01 {
+			qe_phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 			};
-			qe_phy2: ethernet-phy@02 {
+			qe_phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1 0 0>;
 				reg = <0x2>;
 			};
-			qe_phy3: ethernet-phy@03 {
+			qe_phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1 0 0>;
 				reg = <0x3>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
index 76b2bd6f7742..d8367ceddea6 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
@@ -141,7 +141,7 @@
 				gpio-controller;
 			};
 
-			pio1: ucc_pin@01 {
+			pio1: ucc_pin@1 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
@@ -161,7 +161,7 @@
 					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
 			};
 
-			pio2: ucc_pin@02 {
+			pio2: ucc_pin@2 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
@@ -181,7 +181,7 @@
 					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
 			};
 
-			pio3: ucc_pin@03 {
+			pio3: ucc_pin@3 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
@@ -201,7 +201,7 @@
 					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
 			};
 
-			pio4: ucc_pin@04 {
+			pio4: ucc_pin@4 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
@@ -272,30 +272,30 @@
 			reg = <0x2120 0x18>;
 			compatible = "fsl,ucc-mdio";
 
-			qe_phy0: ethernet-phy@07 {
+			qe_phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1 0 0>;
 				reg = <0x7>;
 			};
-			qe_phy1: ethernet-phy@01 {
+			qe_phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 			};
-			qe_phy2: ethernet-phy@02 {
+			qe_phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <3 1 0 0>;
 				reg = <0x2>;
 			};
-			qe_phy3: ethernet-phy@03 {
+			qe_phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <4 1 0 0>;
 				reg = <0x3>;
 			};
-			qe_phy5: ethernet-phy@04 {
+			qe_phy5: ethernet-phy@4 {
 				reg = <0x04>;
 			};
-			qe_phy7: ethernet-phy@06 {
+			qe_phy7: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 			tbi1: tbi-phy@11 {
diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
index 291454c75dda..1047802f4d2a 100644
--- a/arch/powerpc/boot/dts/fsl/p1021mds.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -202,7 +202,7 @@
 			ranges = <0x0 0xe0100 0x60>;
 			device_type = "par_io";
 			num-ports = <3>;
-			pio1: ucc_pin@01 {
+			pio1: ucc_pin@1 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -225,7 +225,7 @@
 					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
 			};
 
-			pio2: ucc_pin@02 {
+			pio2: ucc_pin@2 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -296,7 +296,7 @@
 				interrupts = <4 1 0 0>;
 				reg = <0x0>;
 			};
-			qe_phy1: ethernet-phy@03 {
+			qe_phy1: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1 0 0>;
 				reg = <0x3>;
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
index d44bb12debb0..0a5434a631c3 100644
--- a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
@@ -245,7 +245,7 @@
 		ranges = <0x0 0xe0100 0x60>;
 		device_type = "par_io";
 		num-ports = <3>;
-		pio1: ucc_pin@01 {
+		pio1: ucc_pin@1 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -268,7 +268,7 @@
 				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
 		};
 
-		pio2: ucc_pin@02 {
+		pio2: ucc_pin@2 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -283,7 +283,7 @@
 				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
 		};
 
-		pio3: ucc_pin@03 {
+		pio3: ucc_pin@3 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
@@ -293,7 +293,7 @@
 				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
 		};
 
-		pio4: ucc_pin@04 {
+		pio4: ucc_pin@4 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
index b15acbaea34b..ea33b57f8774 100644
--- a/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
@@ -106,7 +106,7 @@
 				interrupts = <4 1 0 0>;
 				reg = <0x6>;
 			};
-			qe_phy1: ethernet-phy@03 {
+			qe_phy1: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1 0 0>;
 				reg = <0x3>;
diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
index 08816fb474f5..ab75b8f29ae2 100644
--- a/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
@@ -172,7 +172,7 @@
 		ranges = <0x0 0xe0100 0x60>;
 		device_type = "par_io";
 		num-ports = <3>;
-		pio1: ucc_pin@01 {
+		pio1: ucc_pin@1 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -195,7 +195,7 @@
 				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
 		};
 
-		pio2: ucc_pin@02 {
+		pio2: ucc_pin@2 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
@@ -210,7 +210,7 @@
 				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
 		};
 
-		pio3: ucc_pin@03 {
+		pio3: ucc_pin@3 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
@@ -220,7 +220,7 @@
 				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
 		};
 
-		pio4: ucc_pin@04 {
+		pio4: ucc_pin@4 {
 			pio-map = <
 		/* port  pin  dir  open_drain  assignment  has_irq */
 				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index 621f2c6ee6ad..65ff34c49025 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -61,7 +61,7 @@
 			};
 
 			mdio@fc000 {
-				phy_sgmii_2: ethernet-phy@03 {
+				phy_sgmii_2: ethernet-phy@3 {
 					reg = <0x03>;
 				};
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
index fcd2aeb5b8ac..4fa15f48a4c3 100644
--- a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -77,23 +77,23 @@
 			};
 
 			mdio0: mdio@fc000 {
-				phy_sgmii_0: ethernet-phy@02 {
+				phy_sgmii_0: ethernet-phy@2 {
 					reg = <0x02>;
 				};
 
-				phy_sgmii_1: ethernet-phy@03 {
+				phy_sgmii_1: ethernet-phy@3 {
 					reg = <0x03>;
 				};
 
-				phy_sgmii_2: ethernet-phy@01 {
+				phy_sgmii_2: ethernet-phy@1 {
 					reg = <0x01>;
 				};
 
-				phy_rgmii_0: ethernet-phy@04 {
+				phy_rgmii_0: ethernet-phy@4 {
 					reg = <0x04>;
 				};
 
-				phy_rgmii_1: ethernet-phy@05 {
+				phy_rgmii_1: ethernet-phy@5 {
 					reg = <0x05>;
 				};
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
index 2c138627b1b4..3ebb712224cb 100644
--- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -59,7 +59,7 @@
 			};
 
 			mdio@fc000 {
-				phy_sgmii_2: ethernet-phy@03 {
+				phy_sgmii_2: ethernet-phy@3 {
 					reg = <0x03>;
 				};
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 5fdddbd2a62b..099a598c74c0 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -148,15 +148,15 @@
 			};
 
 			mdio0: mdio@fc000 {
-				phy_sgmii_2: ethernet-phy@03 {
+				phy_sgmii_2: ethernet-phy@3 {
 					reg = <0x03>;
 				};
 
-				phy_rgmii_0: ethernet-phy@01 {
+				phy_rgmii_0: ethernet-phy@1 {
 					reg = <0x01>;
 				};
 
-				phy_rgmii_1: ethernet-phy@02 {
+				phy_rgmii_1: ethernet-phy@2 {
 					reg = <0x02>;
 				};
 			};