MIPS: Netlogic: Add MSI support for XLP

Add MSI chip and MSIX chip definitions.

For MSI, we map the link interrupt to a MSI link IRQ which will
do a second level of dispatch based on the MSI status register.

The MSI chip definitions use the MSI enable register to enable
and disable the MSI irqs.

For MSI-X, we split the 32 available MSI-X vectors across the
four PCIe links (8 each). These PIC interrupts generate an IRQ
per link which uses a second level dispatch as well.

The MSI-X chip definition uses the standard functions to enable
and disable interrupts.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6270/

2 files changed, 31 insertions, 10 deletions

diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 1c7e3a1b81ab..3800bf6551ab 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -180,6 +180,7 @@ static void __init nlm_init_percpu_irqs(void)
 #endif
 }
 
+
 void nlm_setup_pic_irq(int node, int picirq, int irq, int irt)
 {
 	struct nlm_pic_irq *pic_data;
@@ -207,24 +208,24 @@ void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *))
 
 static void nlm_init_node_irqs(int node)
 {
-	int i, irt;
-	uint64_t irqmask;
 	struct nlm_soc_info *nodep;
+	int i, irt;
 
 	pr_info("Init IRQ for node %d\n", node);
 	nodep = nlm_get_node(node);
-	irqmask = PERCPU_IRQ_MASK;
+	nodep->irqmask = PERCPU_IRQ_MASK;
 	for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) {
 		irt = nlm_irq_to_irt(i);
-		if (irt == -1)
+		if (irt == -1)		/* unused irq */
 			continue;
-		nlm_setup_pic_irq(node, i, i, irt);
-		/* set interrupts to first cpu in node */
+		nodep->irqmask |= 1ull << i;
+		if (irt == -2)		/* not a direct PIC irq */
+			continue;
+
 		nlm_pic_init_irt(nodep->picbase, irt, i,
 					node * NLM_CPUS_PER_NODE, 0);
-		irqmask |= (1ull << i);
+		nlm_setup_pic_irq(node, i, i, irt);
 	}
-	nodep->irqmask = irqmask;
 }
 
 void nlm_smp_irq_init(int hwcpuid)
@@ -256,6 +257,18 @@ asmlinkage void plat_irq_dispatch(void)
 		return;
 	}
 
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP)
+	/* PCI interrupts need a second level dispatch for MSI bits */
+	if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+		nlm_dispatch_msi(node, i);
+		return;
+	}
+	if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) {
+		nlm_dispatch_msix(node, i);
+		return;
+	}
+
+#endif
 	/* top level irq handling */
 	do_IRQ(nlm_irq_to_xirq(node, i));
 }
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 56c50ba43c9b..56930219964b 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -135,9 +135,17 @@ int nlm_irq_to_irt(int irq)
 		case PIC_I2C_3_IRQ:
 			irt = irt + 3; break;
 		}
-	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
+	} else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
+			irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
 		/* HW bug, PCI IRT entries are bad on early silicon, fix */
-		irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
+		irt = PIC_IRT_PCIE_LINK_INDEX(irq -
+					PIC_PCIE_LINK_LEGACY_IRQ_BASE);
+	} else if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) &&
+			irq <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+		irt = -2;
+	} else if (irq >= PIC_PCIE_MSIX_IRQ(0) &&
+			irq <= PIC_PCIE_MSIX_IRQ(3)) {
+		irt = -2;
 	} else {
 		irt = -1;
 	}