MIPS: Loongson1C: Add board support

Adds basic platform devices for Loongson1C, including serial port
and ethernet.

Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Cc: keguang.zhang@gmail.com
Cc: chenhc@lemote.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13304/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 files changed, 130 insertions, 3 deletions

diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7704f20529d6..3c0c2f2096cd 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -19,6 +19,21 @@ config LOONGSON1_LS1B
 	select USE_GENERIC_EARLY_PRINTK_8250
 	select COMMON_CLK
 
+config LOONGSON1_LS1C
+	bool "Loongson LS1C board"
+	select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+	select SYS_HAS_CPU_LOONGSON1C
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select IRQ_MIPS_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_MIPS16
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select COMMON_CLK
 endchoice
 
 menuconfig CEVT_CSRC_LS1X
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 5f4bd6e071ca..1ab2c5bbc066 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON32) += common/
 #
 
 obj-$(CONFIG_LOONGSON1_LS1B)  += ls1b/
+
+#
+# Loongson LS1C board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1C)  += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index ebb6dc290f0a..ffe01c6d0037 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -5,3 +5,4 @@ cflags-$(CONFIG_CPU_LOONGSON1)	+= \
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 cflags-$(CONFIG_MACH_LOONGSON32)	+= -I$(srctree)/arch/mips/include/asm/mach-loongson32
 load-$(CONFIG_LOONGSON1_LS1B)		+= 0xffffffff80100000
+load-$(CONFIG_LOONGSON1_LS1C)		+= 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
index 455a7704a90f..635a4abe1f48 100644
--- a/arch/mips/loongson32/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
@@ -62,12 +62,58 @@ static void ls1x_irq_unmask(struct irq_data *d)
 			| (1 << bit), LS1X_INTC_INTIEN(n));
 }
 
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			| (1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			| (1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+			& ~(1 << bit), LS1X_INTC_INTPOL(n));
+		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+			| (1 << bit), LS1X_INTC_INTEDGE(n));
+		break;
+	case IRQ_TYPE_NONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct irq_chip ls1x_irq_chip = {
 	.name		= "LS1X-INTC",
 	.irq_ack	= ls1x_irq_ack,
 	.irq_mask	= ls1x_irq_mask,
 	.irq_mask_ack	= ls1x_irq_mask_ack,
 	.irq_unmask	= ls1x_irq_unmask,
+	.irq_set_type   = ls1x_irq_settype,
 };
 
 static void ls1x_irq_dispatch(int n)
@@ -107,7 +153,7 @@ asmlinkage void plat_irq_dispatch(void)
 
 }
 
-struct irqaction cascade_irqaction = {
+static struct irqaction cascade_irqaction = {
 	.handler = no_action,
 	.name = "cascade",
 	.flags = IRQF_NO_THREAD,
@@ -120,7 +166,7 @@ static void __init ls1x_irq_init(int base)
 	/* Disable interrupts and clear pending,
 	 * setup all IRQs as high level triggered
 	 */
-	for (n = 0; n < 4; n++) {
+	for (n = 0; n < INTN; n++) {
 		__raw_writel(0x0, LS1X_INTC_INTIEN(n));
 		__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
 		__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
@@ -129,7 +175,7 @@ static void __init ls1x_irq_init(int base)
 	}
 
 
-	for (n = base; n < LS1X_IRQS; n++) {
+	for (n = base; n < NR_IRQS; n++) {
 		irq_set_chip_and_handler(n, &ls1x_irq_chip,
 					 handle_level_irq);
 	}
@@ -138,6 +184,9 @@ static void __init ls1x_irq_init(int base)
 	setup_irq(INT1_IRQ, &cascade_irqaction);
 	setup_irq(INT2_IRQ, &cascade_irqaction);
 	setup_irq(INT3_IRQ, &cascade_irqaction);
+#if defined(CONFIG_LOONGSON1_LS1C)
+	setup_irq(INT4_IRQ, &cascade_irqaction);
+#endif
 }
 
 void __init arch_init_irq(void)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index f2c714d8fb60..4d12e365dcb0 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -17,6 +17,7 @@
 #include <linux/stmmac.h>
 #include <linux/usb/ehci_pdriver.h>
 
+#include <platform.h>
 #include <loongson1.h>
 #include <cpufreq.h>
 #include <dma.h>
@@ -132,6 +133,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 
 	val = __raw_readl(LS1X_MUX_CTRL1);
 
+#if defined(CONFIG_LOONGSON1_LS1B)
 	plat_dat = dev_get_platdata(&pdev->dev);
 	if (plat_dat->bus_id) {
 		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
@@ -165,6 +167,17 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 		val &= ~GMAC0_SHUT;
 	}
 	__raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	plat_dat = dev_get_platdata(&pdev->dev);
+
+	val &= ~PHY_INTF_SELI;
+	if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+		val |= 0x4 << PHY_INTF_SELI_SHIFT;
+	__raw_writel(val, LS1X_MUX_CTRL1);
+
+	val = __raw_readl(LS1X_MUX_CTRL0);
+	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
 
 	return 0;
 }
@@ -172,7 +185,11 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
 	.bus_id		= 0,
 	.phy_addr	= -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
 	.interface	= PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	.interface	= PHY_INTERFACE_MODE_RMII,
+#endif
 	.mdio_bus_data	= &ls1x_mdio_bus_data,
 	.dma_cfg	= &ls1x_eth_dma_cfg,
 	.has_gmac	= 1,
@@ -203,6 +220,7 @@ struct platform_device ls1x_eth0_pdev = {
 	},
 };
 
+#ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
 	.bus_id		= 1,
 	.phy_addr	= -1,
@@ -236,6 +254,7 @@ struct platform_device ls1x_eth1_pdev = {
 		.platform_data = &ls1x_eth1_pdata,
 	},
 };
+#endif	/* CONFIG_LOONGSON1_LS1B */
 
 /* GPIO */
 static struct resource ls1x_gpio0_resources[] = {
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41afee241..1640744288ee 100644
--- a/arch/mips/loongson32/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
@@ -22,7 +22,11 @@ const char *get_system_type(void)
 
 	switch (processor_id & PRID_REV_MASK) {
 	case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
 		return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+		return "LOONGSON LS1C";
+#endif
 	default:
 		return "LOONGSON (unknown)";
 	}
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
new file mode 100644
index 000000000000..891eac482b82
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
new file mode 100644
index 000000000000..3d69bd63ad56
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2016 Ling Yang <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1c_platform_devices[] __initdata = {
+	&ls1x_uart_pdev,
+	&ls1x_eth0_pdev,
+};
+
+static int __init ls1c_platform_init(void)
+{
+	int err;
+
+	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+
+	err = platform_add_devices(ls1c_platform_devices,
+				   ARRAY_SIZE(ls1c_platform_devices));
+	return err;
+}
+
+arch_initcall(ls1c_platform_init);