summary refs log tree commit diff
path: root/arch/mips/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-03-05 11:28:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-03-05 11:28:25 -0800
commitd9862cfbe2099deb83f0e9c1932c91f2d9c50464 (patch)
tree7092ef41113269f30b5429868a9d161e171c746d /arch/mips/boot
parent8feed3efa8022107bcb3432ac3ec9917e078ae70 (diff)
parentaeb669d41ffabb91b1542f1f802cb12a989fced0 (diff)
downloadlinux-d9862cfbe2099deb83f0e9c1932c91f2d9c50464.tar.gz
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:

 - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance
   when running on a CPU such as the I6500 that supports these.

 - Enable huge page support for MIPS64r6.

 - Optimize post-DMA cache sync by removing that code entirely for
   kernel configurations in which we know it won't be needed.

 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.

 - The ath79 platform migrates to devicetree.

 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

 - The ingenic/jz4740 platform gains support for appended devicetrees.

 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.

* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
  MIPS: lantiq: Remove separate GPHY Firmware loader
  MIPS: ingenic: Add support for appended devicetree
  MIPS: SGI-IP27: rework HUB interrupts
  MIPS: SGI-IP27: do boot CPU init later
  MIPS: SGI-IP27: do xtalk scanning later
  MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
  MIPS: SGI-IP27: clean up bridge access and header files
  MIPS: SGI-IP27: get rid of volatile and hubreg_t
  MIPS: irq: Allocate accurate order pages for irq stack
  MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
  MIPS: eBPF: Remove REG_32BIT_ZERO_EX
  MIPS: eBPF: Always return sign extended 32b values
  MIPS: CM: Fix indentation
  MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
  MIPS: OCTEON: program rx/tx-delay always from DT
  MIPS: OCTEON: delete board-specific link status
  MIPS: OCTEON: don't lie about interface type of CN3005 board
  MIPS: OCTEON: warn if deprecated link status is being used
  MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
  MIPS: Delete unused flush_cache_sigtramp()
  ...
Diffstat (limited to 'arch/mips/boot')
-rw-r--r--arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts14
-rw-r--r--arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts6
2 files changed, 20 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
index 0fa3dd1819ff..dda0559cef50 100644
--- a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
@@ -180,14 +180,28 @@
 				ethernet@0 {
 					phy-handle = <&phy2>;
 					cavium,alt-phy-handle = <&phy100>;
+					rx-delay = <0>;
+					tx-delay = <0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 				ethernet@1 {
 					phy-handle = <&phy3>;
 					cavium,alt-phy-handle = <&phy101>;
+					rx-delay = <0>;
+					tx-delay = <0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 				ethernet@2 {
 					phy-handle = <&phy4>;
 					cavium,alt-phy-handle = <&phy102>;
+					rx-delay = <0>;
+					tx-delay = <0>;
 				};
 				ethernet@3 {
 					compatible = "cavium,octeon-3860-pip-port";
diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
index 243e5dc444fb..962f37fbc7db 100644
--- a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
+++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
@@ -33,12 +33,18 @@
 			interface@0 {
 				ethernet@0 {
 					phy-handle = <&phy7>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
 				};
 				ethernet@1 {
 					phy-handle = <&phy6>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
 				};
 				ethernet@2 {
 					phy-handle = <&phy5>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
 				};
 			};
 		};