Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits)
  m68knommu: fix broken setting of irq_chip and handler
  m68knommu: switch to using -mcpu= flags for ColdFire targets
  m68knommu: arch/m68knommu/Kconfig whitespace cleanup
  m68knommu: create optimal separate instruction and data cache for ColdFire
  m68knommu: support ColdFire caches that do copyback and write-through
  m68knommu: support version 2 ColdFire split cache
  m68knommu: make cache push code ColdFire generic
  m68knommu: clean up ColdFire cache control code
  m68knommu: move inclusion of ColdFire v4 cache registers
  m68knommu: merge bit definitions for version 3 ColdFire cache controller
  m68knommu: create bit definitions for the version 2 ColdFire cache controller
  m68knommu: remove empty __iounmap() it is no used
  m68knommu: remove kernel_map() code, it is not used
  m68knommu: remove do_page_fault(), it is not used
  m68knommu: use user stack pointer hardware on some ColdFire cores
  m68knommu: remove command line printing DEBUG
  m68knommu: remove fasthandler interrupt code
  m68knommu: move UART addressing to part specific includes
  m68knommu: fix clock rate value reported for ColdFire 54xx parts
  m68knommu: move ColdFire CPU names into their headers
  ...

24 files changed, 515 insertions, 380 deletions

diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 7085bd51668b..cb88aa96c4f1 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -2,21 +2,22 @@
 #define _M68KNOMMU_CACHEFLUSH_H
 
 /*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2000-2010, Greg Ungerer <gerg@snapgear.com>
  */
 #include <linux/mm.h>
+#include <asm/mcfsim.h>
 
 #define flush_cache_all()			__flush_cache_all()
 #define flush_cache_mm(mm)			do { } while (0)
 #define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	__flush_cache_all()
+#define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr)		do { } while (0)
-#define flush_dcache_range(start,len)		__flush_cache_all()
+#define flush_dcache_range(start, len)		__flush_dcache_all()
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start,len)		__flush_cache_all()
+#define flush_icache_range(start, len)		__flush_icache_all()
 #define flush_icache_page(vma,pg)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define flush_cache_vmap(start, end)		do { } while (0)
@@ -27,66 +28,52 @@
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy(dst, src, len)
 
+void mcf_cache_push(void);
+
 static inline void __flush_cache_all(void)
 {
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
-	/*
-	 *	Use cpushl to push and invalidate all cache lines.
-	 *	Gas doesn't seem to know how to generate the ColdFire
-	 *	cpushl instruction... Oh well, bit stuff it for now.
-	 */
-	__asm__ __volatile__ (
-		"nop\n\t"
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf468\n\t"
-		"addl	#0x10,%%a0\n\t"
-		"cmpl	#0x00000800,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	#4,%%d0\n\t"
-		"bne	1b\n\t"
-		"movel	#0xb6088500,%%d0\n\t"
-		"movec	%%d0,%%CACR\n\t"
-		: : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-	__asm__ __volatile__ (
-		"movel	#0x81400100, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M523x || CONFIG_M527x */
-#if defined(CONFIG_M528x)
-	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+#ifdef CACHE_PUSH
+	mcf_cache_push();
+#endif
+#ifdef CACHE_INVALIDATE
 	__asm__ __volatile__ (
-		"movel	#0x81000100, %%d0\n\t"
+		"movel	%0, %%d0\n\t"
 		"movec	%%d0, %%CACR\n\t"
 		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
+		: : "i" (CACHE_INVALIDATE) : "d0" );
+#endif
+}
+
+/*
+ * Some ColdFire parts implement separate instruction and data caches,
+ * on those we should just flush the appropriate cache. If we don't need
+ * to do any specific flushing then this will be optimized away.
+ */
+static inline void __flush_icache_all(void)
+{
+#ifdef CACHE_INVALIDATEI
 	__asm__ __volatile__ (
-		"movel	#0xa1000200, %%d0\n\t"
+		"movel	%0, %%d0\n\t"
 		"movec	%%d0, %%CACR\n\t"
 		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
+		: : "i" (CACHE_INVALIDATEI) : "d0" );
+#endif
+}
+
+static inline void __flush_dcache_all(void)
+{
+#ifdef CACHE_PUSH
+	mcf_cache_push();
+#endif
+#ifdef CACHE_INVALIDATED
 	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
+		"movel	%0, %%d0\n\t"
 		"movec	%%d0, %%CACR\n\t"
 		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M532x */
+		: : "i" (CACHE_INVALIDATED) : "d0" );
+#else
+	/* Flush the wrtite buffer */
+	__asm__ __volatile__ ( "nop" );
+#endif
 }
-
 #endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 3b0a34d0fe33..213028cbe110 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -32,7 +32,7 @@
  */
 #define	MCF_MBAR	0x10000000
 #define	MCF_MBAR2	0x80000000
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
 #define	MCF_IPSBAR	MCF_MBAR
 #elif defined(CONFIG_M520x)
 #define	MCF_IPSBAR	0xFC000000
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index 26be277394f9..627d69bacc58 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -42,12 +42,16 @@
  */
 
 #ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
 /*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
+ * This is made a little more tricky on older ColdFires. There is no
+ * separate supervisor and user stack pointers. Need to artificially
  * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
+ * interrupts, otherwise bad things will happen.
  */
+.globl sw_usp
+.globl sw_ksp
+
 .macro SAVE_ALL
 	move	#0x2700,%sr		/* disable intrs */
 	btst	#5,%sp@(2)		/* from user? */
@@ -74,9 +78,7 @@
 	7:
 .endm
 
-.macro RESTORE_ALL
-	btst	#5,%sp@(PT_SR)		/* going user? */
-	bnes	8f			/* no, skip */
+.macro RESTORE_USER
 	move	#0x2700,%sr		/* disable intrs */
 	movel	sw_usp,%a0		/* get usp */
 	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
@@ -91,19 +93,22 @@
 	subql	#8,sw_usp		/* set exception */
 	movel	sw_usp,%sp		/* restore usp */
 	rte
-	8:
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
 .endm
 
+.macro RDUSP
+	movel	sw_usp,%a2
+.endm
+
+.macro WRUSP
+	movel	%a0,sw_usp
+.endm
+
+#else /* !CONFIG_COLDFIRE_SW_A7 */
 /*
- * Quick exception save, use current stack only.
+ * Modern ColdFire parts have separate supervisor and user stack
+ * pointers. Simple load and restore macros for this case.
  */
-.macro SAVE_LOCAL
+.macro SAVE_ALL
 	move	#0x2700,%sr		/* disable intrs */
 	clrl	%sp@-			/* stkadj */
 	movel	%d0,%sp@-		/* orig d0 */
@@ -112,7 +117,7 @@
 	moveml	%d1-%d5/%a0-%a2,%sp@
 .endm
 
-.macro RESTORE_LOCAL
+.macro RESTORE_USER
 	moveml	%sp@,%d1-%d5/%a0-%a2
 	lea	%sp@(32),%sp		/* space for 8 regs */
 	movel	%sp@+,%d0
@@ -121,6 +126,18 @@
 	rte
 .endm
 
+.macro RDUSP
+	/*move	%usp,%a2*/
+	.word	0x4e6a
+.endm
+
+.macro WRUSP
+	/*move	%a0,%usp*/
+	.word	0x4e60
+.endm
+
+#endif /* !CONFIG_COLDFIRE_SW_A7 */
+
 .macro SAVE_SWITCH_STACK
 	lea	%sp@(-24),%sp		/* 6 regs */
 	moveml	%a3-%a6/%d6-%d7,%sp@
@@ -131,14 +148,6 @@
 	lea	%sp@(24),%sp		/* 6 regs */
 .endm
 
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
 #else /* !CONFIG_COLDFIRE */
 
 /*
@@ -167,6 +176,6 @@
 	moveml	%sp@+,%a3-%a6/%d6-%d7
 .endm
 
-#endif /* !CONFIG_COLDFIRE */
+#endif /* !COLDFIRE_SW_A7 */
 #endif /* __ASSEMBLY__ */
 #endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 1b57adbafad5..c64c7b74cf86 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -37,7 +37,7 @@
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
     defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
     defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M532x) || defined(CONFIG_M548x)
+    defined(CONFIG_M532x) || defined(CONFIG_M54xx)
 
 /* These parts have GPIO organized by 8 bit ports */
 
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 6e2413e518cb..cf20f3097af6 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -145,7 +145,6 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
 #define IOMAP_WRITETHROUGH		3
 
 extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
 
 static inline void *ioremap(unsigned long physaddr, unsigned long size)
 {
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 9c384e294af9..561b03b5ddf8 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -12,6 +12,10 @@
 #define	m5206sim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m5206)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
 
 /*
  *	Define the 5206 SIM register set addresses.
@@ -88,6 +92,14 @@
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
 
+#if defined(CONFIG_NETtel)
+#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#else
+#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#endif
+
 /*
  *	Define system peripheral IRQ usage.
  */
@@ -95,7 +107,7 @@
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
 /*
- * Generic GPIO
+ *	Generic GPIO
  */
 #define MCFGPIO_PIN_MAX		8
 #define MCFGPIO_IRQ_VECBASE	-1
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index db824a4b136e..88ed8239fe4e 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -11,6 +11,11 @@
 #define m520xsim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m520x)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
+
 /*
  *  Define the 520x SIM register set addresses.
  */
@@ -54,6 +59,9 @@
 #define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
 #define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
 
+/*
+ * EPORT and GPIO registers.
+ */
 #define MCFEPORT_EPDDR			0xFC088002
 #define MCFEPORT_EPDR			0xFC088004
 #define MCFEPORT_EPPDR			0xFC088005
@@ -97,6 +105,7 @@
 #define MCFGPIO_PCLRR_UART		0xFC0A402A
 #define MCFGPIO_PCLRR_FECH		0xFC0A402B
 #define MCFGPIO_PCLRR_FECL		0xFC0A402C
+
 /*
  * Generic GPIO support
  */
@@ -109,7 +118,6 @@
 #define MCFGPIO_PIN_MAX			80
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
-/****************************************************************************/
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
@@ -126,6 +134,13 @@
 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
 
 /*
+ *  UART module.
+ */
+#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
+#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
+#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
+
+/*
  *  Reset Controll Unit.
  */
 #define	MCF_RCR			0xFC0A0000
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index e8d06b24a48e..4ad7a00257a8 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -11,6 +11,10 @@
 #define	m523xsim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m523x)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
 
 /*
  *	Define the 523x SIM register set addresses.
@@ -50,6 +54,13 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+
 #define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
 #define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
 #define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 79b7b402f3c9..4908b118f2fd 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -11,6 +11,11 @@
 #define	m5249sim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m5249)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
+
 /*
  *	Define the 5249 SIM register set addresses.
  */
@@ -56,6 +61,11 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
+/*
+ *	UART module.
+ */
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
 
 /*
  *	Some symbol defines for the above...
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index df3332c2317d..b7cc50abc831 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -12,6 +12,11 @@
 #define	m5272sim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m5272)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
+
 /*
  *	Define the 5272 SIM register set addresses.
  */
@@ -62,6 +67,9 @@
 #define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
 #define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
 
+#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+
 #define	MCFSIM_PACNT		(MCF_MBAR + 0x80) /* Port A Control (r/w) */
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x84) /* Port A Direction (r/w) */
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x86) /* Port A Data (r/w) */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 1feb46f108ce..e8042e8bc003 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -11,6 +11,10 @@
 #define	m527xsim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m527x)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
 
 /*
  *	Define the 5270/5271 SIM register set addresses.
@@ -55,6 +59,12 @@
 #define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
 #endif
 
+/*
+ *	UART module.
+ */
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
 
 #ifdef CONFIG_M5271
 #define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 891cbedad972..a6d2f4d9aaa0 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -11,6 +11,10 @@
 #define	m528xsim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m528x)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m52xxacr.h>
 
 /*
  *	Define the 5280/5282 SIM register set addresses.
@@ -42,6 +46,13 @@
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
 /*
+ *	UART module.
+ */
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+
+/*
  * 	GPIO registers
  */
 #define MCFGPIO_PORTA		(MCF_IPSBAR + 0x00100000)
diff --git a/arch/m68k/include/asm/m52xxacr.h b/arch/m68k/include/asm/m52xxacr.h
new file mode 100644
index 000000000000..abc391a9ae8d
--- /dev/null
+++ b/arch/m68k/include/asm/m52xxacr.h
@@ -0,0 +1,94 @@
+/****************************************************************************/
+
+/*
+ * m52xxacr.h -- ColdFire version 2 core cache support
+ *
+ * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m52xxacr_h
+#define m52xxacr_h
+/****************************************************************************/
+
+/*
+ * All varients of the ColdFire using version 2 cores have a similar
+ * cache setup. Although not absolutely identical the cache register
+ * definitions are compatible for all of them. Mostly they support a
+ * configurable cache memory that can be instruction only, data only,
+ * or split instruction and data. The exception is the very old version 2
+ * core based parts, like the 5206(e), 5249 and 5272, which are instruction
+ * cache only. Cache size varies from 2k up to 16k.
+ */
+
+/*
+ * Define the Cache Control register flags.
+ */
+#define CACR_CENB	0x80000000	/* Enable cache */
+#define CACR_CDPI	0x10000000	/* Disable invalidation by CPUSHL */
+#define CACR_CFRZ	0x08000000	/* Cache freeze mode */
+#define CACR_CINV	0x01000000	/* Invalidate cache */
+#define CACR_DISI	0x00800000	/* Disable instruction cache */
+#define CACR_DISD	0x00400000	/* Disable data cache */
+#define CACR_INVI	0x00200000	/* Invalidate instruction cache */
+#define CACR_INVD	0x00100000	/* Invalidate data cache */
+#define CACR_CEIB	0x00000400	/* Non-cachable instruction burst */
+#define CACR_DCM	0x00000200	/* Default cache mode */
+#define CACR_DBWE	0x00000100	/* Buffered write enable */
+#define CACR_DWP	0x00000020	/* Write protection */
+#define CACR_EUSP	0x00000010	/* Enable separate user a7 */
+
+/*
+ * Define the Access Control register flags.
+ */
+#define ACR_BASE_POS	24		/* Address Base (upper 8 bits) */
+#define ACR_MASK_POS	16		/* Address Mask (next 8 bits) */
+#define ACR_ENABLE	0x00008000	/* Enable this ACR */
+#define ACR_USER	0x00000000	/* Allow only user accesses */
+#define ACR_SUPER	0x00002000	/* Allow supervisor access only */
+#define ACR_ANY		0x00004000	/* Allow any access type */
+#define ACR_CENB	0x00000000	/* Caching of region enabled */
+#define ACR_CDIS	0x00000040	/* Caching of region disabled */
+#define ACR_BWE		0x00000020	/* Write buffer enabled */
+#define ACR_WPROTECT	0x00000004	/* Write protect region */
+
+/*
+ * Set the cache controller settings we will use. On the cores that support
+ * a split cache configuration we allow all the combinations at Kconfig
+ * time. For those cores that only have an instruction cache we just set
+ * that as on.
+ */
+#if defined(CONFIG_CACHE_I)
+#define CACHE_TYPE	(CACR_DISD + CACR_EUSP)
+#define CACHE_INVTYPEI	0
+#elif defined(CONFIG_CACHE_D)
+#define CACHE_TYPE	(CACR_DISI + CACR_EUSP)
+#define CACHE_INVTYPED	0
+#elif defined(CONFIG_CACHE_BOTH)
+#define CACHE_TYPE	CACR_EUSP
+#define CACHE_INVTYPEI	CACR_INVI
+#define CACHE_INVTYPED	CACR_INVD
+#else
+/* This is the instruction cache only devices (no split cache, no eusp) */
+#define CACHE_TYPE	0
+#define CACHE_INVTYPEI	0
+#endif
+
+#define CACHE_INIT	(CACR_CINV + CACHE_TYPE)
+#define CACHE_MODE	(CACR_CENB + CACHE_TYPE + CACR_DCM)
+
+#define CACHE_INVALIDATE  (CACHE_MODE + CACR_CINV)
+#if defined(CACHE_INVTYPEI)
+#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
+#endif
+#if defined(CACHE_INVTYPED)
+#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
+#endif
+
+#define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
+			 (0x000f0000) + \
+			 (ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
+#define ACR1_MODE	0
+
+/****************************************************************************/
+#endif  /* m52xxsim_h */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index c6830e5b54ce..0bf57397e7a9 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -14,6 +14,11 @@
 #define	m5307sim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m5307)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m53xxacr.h>
+
 /*
  *	Define the 5307 SIM register set addresses.
  */
@@ -94,6 +99,17 @@
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
 /*
+ *  UART module.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#endif
+
+/*
  * Generic GPIO support
  */
 #define MCFGPIO_PIN_MAX			16
@@ -146,32 +162,5 @@
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
-
 /****************************************************************************/
 #endif	/* m5307sim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index c4bf1c81e3cf..e6470f8ca324 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -9,6 +9,11 @@
 #define	m532xsim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m532x)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m53xxacr.h>
+
 #define MCF_REG32(x) (*(volatile unsigned long  *)(x))
 #define MCF_REG16(x) (*(volatile unsigned short *)(x))
 #define MCF_REG08(x) (*(volatile unsigned char  *)(x))
@@ -74,31 +79,11 @@
 #define	MCF_IRQ_PROFILER	(64 + 33)	/* Timer1 */
 
 /*
- *	Define the Cache register flags.
+ *  UART module.
  */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
+#define MCFUART_BASE1		0xFC060000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xFC064000	/* Base address of UART2 */
+#define MCFUART_BASE3		0xFC068000	/* Base address of UART3 */
 
 /*********************************************************************
  *
diff --git a/arch/m68k/include/asm/m53xxacr.h b/arch/m68k/include/asm/m53xxacr.h
new file mode 100644
index 000000000000..cd952b0a8bd3
--- /dev/null
+++ b/arch/m68k/include/asm/m53xxacr.h
@@ -0,0 +1,101 @@
+/****************************************************************************/
+
+/*
+ * m53xxacr.h -- ColdFire version 3 core cache support
+ *
+ * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m53xxacr_h
+#define m53xxacr_h
+/****************************************************************************/
+
+/*
+ * All varients of the ColdFire using version 3 cores have a similar
+ * cache setup. They have a unified instruction and data cache, with
+ * configurable write-through or copy-back operation.
+ */
+
+/*
+ * Define the Cache Control register flags.
+ */
+#define CACR_EC		0x80000000	/* Enable cache */
+#define CACR_ESB	0x20000000	/* Enable store buffer */
+#define CACR_DPI	0x10000000	/* Disable invalidation by CPUSHL */
+#define CACR_HLCK	0x08000000	/* Half cache lock mode */
+#define CACR_CINVA	0x01000000	/* Invalidate cache */
+#define CACR_DNFB	0x00000400	/* Inhibited fill buffer */
+#define CACR_DCM_WT	0x00000000	/* Cacheable write-through */
+#define CACR_DCM_CB	0x00000100	/* Cacheable copy-back */
+#define CACR_DCM_PRE	0x00000200	/* Cache inhibited, precise */
+#define CACR_DCM_IMPRE	0x00000300	/* Cache inhibited, imprecise */
+#define CACR_WPROTECT	0x00000020	/* Write protect*/
+#define CACR_EUSP	0x00000010	/* Eanble separate user a7 */
+
+/*
+ * Define the Access Control register flags.
+ */
+#define ACR_BASE_POS	24		/* Address Base (upper 8 bits) */
+#define ACR_MASK_POS	16		/* Address Mask (next 8 bits) */
+#define ACR_ENABLE	0x00008000	/* Enable this ACR */
+#define ACR_USER	0x00000000	/* Allow only user accesses */
+#define ACR_SUPER	0x00002000	/* Allow supervisor access only */
+#define ACR_ANY		0x00004000	/* Allow any access type */
+#define ACR_CM_WT	0x00000000	/* Cacheable, write-through */
+#define ACR_CM_CB	0x00000020	/* Cacheable, copy-back */
+#define ACR_CM_PRE	0x00000040	/* Cache inhibited, precise */
+#define ACR_CM_IMPRE	0x00000060	/* Cache inhibited, imprecise */
+#define ACR_WPROTECT	0x00000004	/* Write protect region */
+
+/*
+ * Define the cache type and arrangement (needed for pushes).
+ */
+#if defined(CONFIG_M5307)
+#define	CACHE_SIZE	0x2000		/* 8k of unified cache */
+#define	ICACHE_SIZE	CACHE_SIZE
+#define	DCACHE_SIZE	CACHE_SIZE
+#elif defined(CONFIG_M532x)
+#define	CACHE_SIZE	0x4000		/* 32k of unified cache */
+#define	ICACHE_SIZE	CACHE_SIZE
+#define	DCACHE_SIZE	CACHE_SIZE
+#endif
+
+#define	CACHE_LINE_SIZE	16		/* 16 byte line size */
+#define	CACHE_WAYS	4		/* 4 ways - set associative */
+
+/*
+ * Set the cache controller settings we will use. This default in the
+ * CACR is cache inhibited, we use the ACR register to set cacheing
+ * enabled on the regions we want (eg RAM).
+ */
+#if defined(CONFIG_CACHE_COPYBACK)
+#define CACHE_TYPE	ACR_CM_CB
+#define CACHE_PUSH
+#else
+#define CACHE_TYPE	ACR_CM_WT
+#endif
+
+#ifdef CONFIG_COLDFIRE_SW_A7
+#define CACHE_MODE	(CACR_EC + CACR_ESB + CACR_DCM_PRE)
+#else
+#define CACHE_MODE	(CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
+#endif
+
+/*
+ * Unified cache means we will never need to flush for coherency of
+ * instruction fetch. We will need to flush to maintain memory/DMA
+ * coherency though in all cases. And for copyback caches we will need
+ * to push cached data as well.
+ */
+#define CACHE_INIT	  CACR_CINVA
+#define CACHE_INVALIDATE  CACR_CINVA
+#define CACHE_INVALIDATED CACR_CINVA
+
+#define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
+			 (0x000f0000) + \
+			 (ACR_ENABLE + ACR_ANY + CACHE_TYPE))
+#define ACR1_MODE	0
+
+/****************************************************************************/
+#endif  /* m53xxsim_h */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index c399abbf953c..75f5c28a551d 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -14,6 +14,11 @@
 #define	m5407sim_h
 /****************************************************************************/
 
+#define	CPU_NAME		"COLDFIRE(m5407)"
+#define	CPU_INSTR_PER_JIFFY	3
+
+#include <asm/m54xxacr.h>
+
 /*
  *	Define the 5407 SIM register set addresses.
  */
@@ -73,6 +78,9 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
@@ -117,39 +125,5 @@
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_DEC		0x80000000	/* Enable data cache */
-#define	CACR_DWP		0x40000000	/* Data write protection */
-#define	CACR_DESB		0x20000000	/* Enable data store buffer */
-#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
-#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
-#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
-#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
-#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
-#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
-#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
-#define	CACR_BEC		0x00080000	/* Enable branch cache */
-#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
-#define	CACR_IEC		0x00008000	/* Enable instruction cache */
-#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
-#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
-#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
-#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
-#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
-
-#define	ACR_BASE_POS		24		/* Address Base */
-#define	ACR_MASK_POS		16		/* Address Mask */
-#define	ACR_ENABLE		0x00008000	/* Enable address */
-#define	ACR_USER		0x00000000	/* User mode access only */
-#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
-#define	ACR_ANY			0x00004000	/* Match any access mode */
-#define	ACR_CM_WT		0x00000000	/* Write through mode */
-#define	ACR_CM_CP		0x00000020	/* Copyback mode */
-#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
-#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
-#define	ACR_WPROTECT		0x00000004	/* Write protect */
-
 /****************************************************************************/
 #endif	/* m5407sim_h */
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
new file mode 100644
index 000000000000..16a1835f9b2a
--- /dev/null
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -0,0 +1,97 @@
+/*
+ * Bit definitions for the MCF54xx ACR and CACR registers.
+ */
+
+#ifndef	m54xxacr_h
+#define m54xxacr_h
+
+/*
+ *	Define the Cache register flags.
+ */
+#define CACR_DEC	0x80000000	/* Enable data cache */
+#define CACR_DWP	0x40000000	/* Data write protection */
+#define CACR_DESB	0x20000000	/* Enable data store buffer */
+#define CACR_DDPI	0x10000000	/* Disable invalidation by CPUSHL */
+#define CACR_DHCLK	0x08000000	/* Half data cache lock mode */
+#define CACR_DDCM_WT	0x00000000	/* Write through cache*/
+#define CACR_DDCM_CP	0x02000000	/* Copyback cache */
+#define CACR_DDCM_P	0x04000000	/* No cache, precise */
+#define CACR_DDCM_IMP	0x06000000	/* No cache, imprecise */
+#define CACR_DCINVA	0x01000000	/* Invalidate data cache */
+#define CACR_BEC	0x00080000	/* Enable branch cache */
+#define CACR_BCINVA	0x00040000	/* Invalidate branch cache */
+#define CACR_IEC	0x00008000	/* Enable instruction cache */
+#define CACR_DNFB	0x00002000	/* Inhibited fill buffer */
+#define CACR_IDPI	0x00001000	/* Disable CPUSHL */
+#define CACR_IHLCK	0x00000800	/* Intruction cache half lock */
+#define CACR_IDCM	0x00000400	/* Intruction cache inhibit */
+#define CACR_ICINVA	0x00000100	/* Invalidate instr cache */
+#define CACR_EUSP	0x00000020	/* Enable separate user a7 */
+
+#define ACR_BASE_POS	24		/* Address Base */
+#define ACR_MASK_POS	16		/* Address Mask */
+#define ACR_ENABLE	0x00008000	/* Enable address */
+#define ACR_USER	0x00000000	/* User mode access only */
+#define ACR_SUPER	0x00002000	/* Supervisor mode only */
+#define ACR_ANY		0x00004000	/* Match any access mode */
+#define ACR_CM_WT	0x00000000	/* Write through mode */
+#define ACR_CM_CP	0x00000020	/* Copyback mode */
+#define ACR_CM_OFF_PRE	0x00000040	/* No cache, precise */
+#define ACR_CM_OFF_IMP	0x00000060	/* No cache, imprecise */
+#define ACR_CM		0x00000060	/* Cache mode mask */
+#define ACR_WPROTECT	0x00000004	/* Write protect */
+
+#if defined(CONFIG_M5407)
+
+#define ICACHE_SIZE 0x4000	/* instruction - 16k */
+#define DCACHE_SIZE 0x2000	/* data - 8k */
+
+#elif defined(CONFIG_M54xx)
+
+#define ICACHE_SIZE 0x8000	/* instruction - 32k */
+#define DCACHE_SIZE 0x8000	/* data - 32k */
+
+#endif
+
+#define CACHE_LINE_SIZE 0x0010	/* 16 bytes */
+#define CACHE_WAYS 4		/* 4 ways */
+
+/*
+ *	Version 4 cores have a true harvard style separate instruction
+ *	and data cache. Enable data and instruction caches, also enable write
+ *	buffers and branch accelerator.
+ */
+/* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */
+/* use '+' instead of '|' for assembler's sake */
+
+	/* Enable data cache */
+	/* Enable data store buffer */
+	/* outside ACRs : No cache, precise */
+	/* Enable instruction+branch caches */
+#if defined(CONFIG_M5407)
+#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC)
+#else
+#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
+#endif
+#if defined(CONFIG_CACHE_COPYBACK)
+#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
+#else
+#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT)
+#endif
+#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
+
+#define CACHE_INIT	(CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATE  (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
+#define ACR0_MODE	(0x000f0000+DATA_CACHE_MODE)
+#define ACR1_MODE	0
+#define ACR2_MODE	(0x000f0000+INSN_CACHE_MODE)
+#define ACR3_MODE	0
+
+#if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP)
+/* Copyback cache mode must push dirty cache lines first */
+#define	CACHE_PUSH
+#endif
+
+#endif	/* m54xxacr_h */
diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m54xxgpt.h
index 33b2eef90f0a..df75dd87ae7a 100644
--- a/arch/m68k/include/asm/m548xgpt.h
+++ b/arch/m68k/include/asm/m54xxgpt.h
@@ -1,13 +1,13 @@
 /*
- * File:	m548xgpt.h
- * Purpose:	Register and bit definitions for the MCF548X
+ * File:	m54xxgpt.h
+ * Purpose:	Register and bit definitions for the MCF54XX
  *
  * Notes:
  *
  */
 
-#ifndef m548xgpt_h
-#define m548xgpt_h
+#ifndef m54xxgpt_h
+#define m54xxgpt_h
 
 /*********************************************************************
 *
@@ -87,4 +87,4 @@
 
 /********************************************************************/
 
-#endif /* m548xgpt_h */
+#endif /* m54xxgpt_h */
diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m54xxsim.h
index 149135ef30d2..462ae5328441 100644
--- a/arch/m68k/include/asm/m548xsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -1,11 +1,16 @@
 /*
- *	m548xsim.h -- ColdFire 547x/548x System Integration Unit support.
+ *	m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
  */
 
-#ifndef	m548xsim_h
-#define m548xsim_h
+#ifndef	m54xxsim_h
+#define m54xxsim_h
 
-#define MCFINT_VECBASE      64
+#define	CPU_NAME		"COLDFIRE(m54xx)"
+#define	CPU_INSTR_PER_JIFFY	2
+
+#include <asm/m54xxacr.h>
+
+#define MCFINT_VECBASE		64
 
 /*
  *      Interrupt Controller Registers
@@ -22,6 +27,14 @@
 #define MCFINTC_ICR0		0x40		/* Base ICR register */
 
 /*
+ *	UART module.
+ */
+#define MCFUART_BASE1		0x8600		/* Base address of UART1 */
+#define MCFUART_BASE2		0x8700		/* Base address of UART2 */
+#define MCFUART_BASE3		0x8800		/* Base address of UART3 */
+#define MCFUART_BASE4		0x8900		/* Base address of UART4 */
+
+/*
  *	Define system peripheral IRQ usage.
  */
 #define MCF_IRQ_TIMER		(64 + 54)	/* Slice Timer 0 */
@@ -52,4 +65,4 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
-#endif	/* m548xsim_h */
+#endif	/* m54xxsim_h */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
deleted file mode 100644
index f49dfc09f70a..000000000000
--- a/arch/m68k/include/asm/mcfcache.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfcache.h -- ColdFire CPU cache support code
- *
- *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	__M68KNOMMU_MCFCACHE_H
-#define	__M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- *	The different ColdFire families have different cache arrangments.
- *	Everything from a small instruction only cache, to configurable
- *	data and/or instruction cache, to unified instruction/data, to 
- *	harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- *	Simple version 2 core cache. These have instruction cache only,
- *	we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	movel	#0x80000100,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- *	New version 2 cores have a configurable split cache arrangement.
- *	For now I am just enabling instruction cache - but ultimately I
- *	think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
-	movel	#0x01400000,%d0
-	movec	%d0,%CACR		/* invalidate cache */
-	nop
-	movel	#0x0000c000,%d0		/* set SDRAM cached only */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80400100,%d0		/* configure cache */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
-	nop
-	movel	#0x01000000, %d0
-	movec	%d0, %CACR		/* Invalidate cache */
-	nop
-	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000, %d0	/* No other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x80000200, %d0	/* Setup cache mask */
-	movec	%d0, %CACR		/* Enable cache */
-	nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- *	The version 3 core cache. Oddly enough the version 2 core 5249
- *	has the same SDRAM and cache setup as the version 3 cores.
- *	This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
-	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-#else
-	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
-#endif
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0xa0000200,%d0		/* enable cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	nop
-	movel	#0x4001C000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80000200,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
-/*
- *	Version 4 cores have a true harvard style separate instruction
- *	and data cache. Invalidate and enable cache, also enable write
- *	buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
-	movel	#0x01040100,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR2
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR3
-	movel	#0xb6088400,%d0		/* enable caches */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
-	move.l	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	move.l	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	move.l	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	move.l	#0x80400000,%d0		/* enable 8K instruction cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 6901fd68165b..ebd0304054ad 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -41,8 +41,8 @@
 #elif defined(CONFIG_M5407)
 #include <asm/m5407sim.h>
 #include <asm/mcfintc.h>
-#elif defined(CONFIG_M548x)
-#include <asm/m548xsim.h>
+#elif defined(CONFIG_M54xx)
+#include <asm/m54xxsim.h>
 #endif
 
 /****************************************************************************/
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index db72e2b889ca..2abedff0a694 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -12,49 +12,6 @@
 #define	mcfuart_h
 /****************************************************************************/
 
-/*
- *	Define the base address of the UARTS within the MBAR address
- *	space.
- */
-#if defined(CONFIG_M5272)
-#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#else
-#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
-#else
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
-#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
-#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
-#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
-#elif defined(CONFIG_M548x)
-#define MCFUART_BASE1		0x8600		/* on M548x */
-#define MCFUART_BASE2		0x8700		/* on M548x */
-#define MCFUART_BASE3		0x8800		/* on M548x */
-#define MCFUART_BASE4		0x8900		/* on M548x */
-#endif
-
-
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
@@ -217,7 +174,7 @@ struct mcf_platform_uart {
 #define	MCFUART_URF_RXS		0xc0		/* Receiver status */
 #endif
 
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
 #define MCFUART_TXFIFOSIZE	512
 #elif defined(CONFIG_M5272)
 #define MCFUART_TXFIFOSIZE	25
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 7a6a7590cc02..278c69bad57a 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -20,23 +20,26 @@
 
 static inline unsigned long rdusp(void)
 {
-#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
 	extern unsigned int sw_usp;
 	return sw_usp;
 #else
-	unsigned long usp;
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	register unsigned long usp __asm__("a0");
+	/* move %usp,%a0 */
+	__asm__ __volatile__(".word 0x4e68" : "=a" (usp));
 	return usp;
 #endif
 }
 
 static inline void wrusp(unsigned long usp)
 {
-#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
 	extern unsigned int sw_usp;
 	sw_usp = usp;
 #else
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+	register unsigned long a0 __asm__("a0") = usp;
+	/* move %a0,%usp */
+	__asm__ __volatile__(".word 0x4e60" : : "a" (a0) );
 #endif
 }