i2c: bfin-twi: move bits macros and structs in header from arch include to generic include

The ADI TWI peripheral is not binding to the Blackfin processor only.
The bits macros and structs should be put in the generic include header.
And update head file path in drivers accordingly.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

2 files changed, 2 insertions, 125 deletions

diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
index 90c3c006557d..34cc395f8b77 100644
--- a/arch/blackfin/include/asm/bfin_twi.h
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -9,60 +9,7 @@
 #ifndef __ASM_BFIN_TWI_H__
 #define __ASM_BFIN_TWI_H__
 
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/*
- * All Blackfin system MMRs are padded to 32bits even if the register
- * itself is only 16bits.  So use a helper macro to streamline this.
- */
-#define __BFP(m) u16 m; u16 __pad_##m
-
-/*
- * bfin twi registers layout
- */
-struct bfin_twi_regs {
-	__BFP(clkdiv);
-	__BFP(control);
-	__BFP(slave_ctl);
-	__BFP(slave_stat);
-	__BFP(slave_addr);
-	__BFP(master_ctl);
-	__BFP(master_stat);
-	__BFP(master_addr);
-	__BFP(int_stat);
-	__BFP(int_mask);
-	__BFP(fifo_ctl);
-	__BFP(fifo_stat);
-	u32 __pad[20];
-	__BFP(xmt_data8);
-	__BFP(xmt_data16);
-	__BFP(rcv_data8);
-	__BFP(rcv_data16);
-};
-
-#undef __BFP
-
-struct bfin_twi_iface {
-	int			irq;
-	spinlock_t		lock;
-	char			read_write;
-	u8			command;
-	u8			*transPtr;
-	int			readNum;
-	int			writeNum;
-	int			cur_mode;
-	int			manual_stop;
-	int			result;
-	struct i2c_adapter	adap;
-	struct completion	complete;
-	struct i2c_msg		*pmsg;
-	int			msg_num;
-	int			cur_msg;
-	u16			saved_clkdiv;
-	u16			saved_control;
-	struct bfin_twi_regs __iomem *regs_base;
-};
+#include <asm/blackfin.h>
 
 #define DEFINE_TWI_REG(reg_name, reg) \
 static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \
@@ -113,75 +60,4 @@ static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface)
 }
 #endif
 
-
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low                    */
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low                 */
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz)    */
-#define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
-#define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001	/* Slave Enable                                                                 */
-#define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
-#define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
-#define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010	/* General Call Address Matching Enabled                */
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL		0x0002	/* General Call Indicator                                               */
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001	/* Master Mode Enable                                           */
-#define	MADD_LEN	0x0002	/* Master Address Length                                        */
-#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
-#define	FAST		0x0008	/* Use Fast Mode Timing Specs                           */
-#define	STOP		0x0010	/* Issue Stop Condition                                         */
-#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer     */
-#define	DCNT		0x3FC0	/* Data Bytes To Transfer                                       */
-#define	SDAOVR		0x4000	/* Serial Data Override                                         */
-#define	SCLOVR		0x8000	/* Serial Clock Override                                        */
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001	/* Master Transfer In Progress                                  */
-#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted)    */
-#define	ANAK		0x0004	/* Address Not Acknowledged                                             */
-#define	DNAK		0x0008	/* Data Not Acknowledged                                                */
-#define	BUFRDERR	0x0010	/* Buffer Read Error                                                    */
-#define	BUFWRERR	0x0020	/* Buffer Write Error                                                   */
-#define	SDASEN		0x0040	/* Serial Data Sense                                                    */
-#define	SCLSEN		0x0080	/* Serial Clock Sense                                                   */
-#define	BUSBUSY		0x0100	/* Bus Busy Indicator                                                   */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001	/* Slave Transfer Initiated     */
-#define	SCOMP		0x0002	/* Slave Transfer Complete      */
-#define	SERR		0x0004	/* Slave Transfer Error         */
-#define	SOVF		0x0008	/* Slave Overflow                       */
-#define	MCOMP		0x0010	/* Master Transfer Complete     */
-#define	MERR		0x0020	/* Master Transfer Error        */
-#define	XMTSERV		0x0040	/* Transmit FIFO Service        */
-#define	RCVSERV		0x0080	/* Receive FIFO Service         */
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                        */
-#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                         */
-#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length     */
-#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length      */
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003	/* Transmit FIFO Status                                                 */
-#define	XMT_EMPTY	0x0000	/*              Transmit FIFO Empty                                             */
-#define	XMT_HALF	0x0001	/*              Transmit FIFO Has 1 Byte To Write               */
-#define	XMT_FULL	0x0003	/*              Transmit FIFO Full (2 Bytes To Write)   */
-
-#define	RCVSTAT		0x000C	/* Receive FIFO Status                                                  */
-#define	RCV_EMPTY	0x0000	/*              Receive FIFO Empty                                              */
-#define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
-#define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
-
 #endif
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 01232a13470d..947ad0832338 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/i2c/bfin_twi.h>
 
 #include <asm/blackfin.h>
 #include <asm/gpio.h>