Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:

- Few GPMC fixes and binding doc updates noted after sending
  pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
  handling fixes

Then few minor things that are not strictly fixes but are good
to get out of the way:

- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig

* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  ARM: OMAP2+: only WARN if a GPMC child probe function fail
  ARM: OMAP2+: only search for GPMC DT child nodes on probe
  Documentation: dt: update properties in TI GPMC NAND example
  Documentation: dt: update TI GPMC ethernet binding properties

Signed-off-by: Olof Johansson <olof@lixom.net>

9 files changed, 39 insertions, 42 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 51a20a441773..c1ef64bc5abd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -155,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
+CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
@@ -197,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_OMAP_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 1a4e887f028d..68ab858e27b7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void)
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 			__func__, pdev->name, pdev->id);
-		goto exit_device_put;
+		goto exit_iounmap;
 	}
 
 	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void)
 		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
 			__func__, pdev->name);
 		ret = -ENOMEM;
-		goto exit_device_del;
+		goto exit_iounmap;
 	}
 
 	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -402,8 +402,8 @@ exit_release_d:
 	kfree(d);
 exit_release_p:
 	kfree(p);
-exit_device_del:
-	platform_device_del(pdev);
+exit_iounmap:
+	iounmap(dma_base);
 exit_device_put:
 	platform_device_put(pdev);
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6de78605c0af..04c116555412 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -112,13 +112,13 @@ static u8 omap3_beagle_version;
  */
 static struct {
 	int mmc1_gpio_wp;
-	int usb_pwr_level;
+	bool usb_pwr_level;	/* 0 - Active Low, 1 - Active High */
 	int dvi_pd_gpio;
 	int usr_button_gpio;
 	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
-	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
+	.usb_pwr_level = 0,
 	.dvi_pd_gpio = -EINVAL,
 	.usr_button_gpio = 4,
 	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void)
 	case 0:
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
-		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+		beagle_config.usb_pwr_level = 1;
 		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	case 2:
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 1a884670a6c4..18ca61e300b3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -73,11 +73,11 @@
 #define LIS302_IRQ1_GPIO 181
 #define LIS302_IRQ2_GPIO 180  /* Not yet in use */
 
-/* list all spi devices here */
+/* List all SPI devices here. Note that the list/probe order seems to matter! */
 enum {
 	RX51_SPI_WL1251,
-	RX51_SPI_MIPID,		/* LCD panel */
 	RX51_SPI_TSC2005,	/* Touch Controller */
+	RX51_SPI_MIPID,		/* LCD panel */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ed946df5ad8a..6c4da1254f53 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1520,36 +1520,22 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		return ret;
 	}
 
-	for_each_node_by_name(child, "nand") {
-		ret = gpmc_probe_nand_child(pdev, child);
-		if (ret < 0) {
-			of_node_put(child);
-			return ret;
-		}
-	}
+	for_each_child_of_node(pdev->dev.of_node, child) {
 
-	for_each_node_by_name(child, "onenand") {
-		ret = gpmc_probe_onenand_child(pdev, child);
-		if (ret < 0) {
-			of_node_put(child);
-			return ret;
-		}
-	}
+		if (!child->name)
+			continue;
 
-	for_each_node_by_name(child, "nor") {
-		ret = gpmc_probe_generic_child(pdev, child);
-		if (ret < 0) {
-			of_node_put(child);
-			return ret;
-		}
-	}
+		if (of_node_cmp(child->name, "nand") == 0)
+			ret = gpmc_probe_nand_child(pdev, child);
+		else if (of_node_cmp(child->name, "onenand") == 0)
+			ret = gpmc_probe_onenand_child(pdev, child);
+		else if (of_node_cmp(child->name, "ethernet") == 0 ||
+			 of_node_cmp(child->name, "nor") == 0)
+			ret = gpmc_probe_generic_child(pdev, child);
 
-	for_each_node_by_name(child, "ethernet") {
-		ret = gpmc_probe_generic_child(pdev, child);
-		if (ret < 0) {
+		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
+			 __func__, child->full_name))
 			of_node_put(child);
-			return ret;
-		}
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0f4c18e6e60c..1272c41d4749 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void)
 			cpu_rev = "1.0";
 			break;
 		case 1:
-		/* FALLTHROUGH */
-		default:
 			omap_revision = AM335X_REV_ES2_0;
 			cpu_rev = "2.0";
 			break;
+		case 2:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = AM335X_REV_ES2_1;
+			cpu_rev = "2.1";
+			break;
 		}
 		break;
 	case 0xb8f2:
@@ -644,13 +648,12 @@ void __init omap_soc_device_init(void)
 	soc_dev_attr->revision = soc_rev;
 
 	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR_OR_NULL(soc_dev)) {
+	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
 		return;
 	}
 
 	parent = soc_device_to_device(soc_dev);
-	if (!IS_ERR_OR_NULL(parent))
-		device_create_file(parent, &omap_soc_attr);
+	device_create_file(parent, &omap_soc_attr);
 }
 #endif /* CONFIG_SOC_BUS */
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
index 6543ebf8ecfc..3f26d297c082 100644
--- a/arch/arm/mach-omap2/mux34xx.h
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -393,6 +393,10 @@
 #define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET		0xa1c
 #define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0xa1e
 #define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET			0xa20
+#define OMAP3_CONTROL_PADCONF_GPIO_127				0xa24
+#define OMAP3_CONTROL_PADCONF_GPIO_126				0xa26
+#define OMAP3_CONTROL_PADCONF_GPIO_128				0xa28
+#define OMAP3_CONTROL_PADCONF_GPIO_129				0xa2a
 
 #define OMAP3_CONTROL_PADCONF_MUX_SIZE				\
-		(OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
+		(OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index eeea4fa28fbc..e6d230700b2b 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -876,4 +876,4 @@ static int __init omap_device_late_init(void)
 	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
 	return 0;
 }
-omap_late_initcall(omap_device_late_init);
+omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 18fdeeb3a44a..197cc16870d9 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define AM335X_CLASS		0x33500033
 #define AM335X_REV_ES1_0	AM335X_CLASS
 #define AM335X_REV_ES2_0	(AM335X_CLASS | (0x1 << 8))
+#define AM335X_REV_ES2_1	(AM335X_CLASS | (0x2 << 8))
 
 #define OMAP443X_CLASS		0x44300044
 #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
@@ -496,6 +497,7 @@ level(__##fn);
 #define omap_subsys_initcall(fn)	omap_initcall(subsys_initcall, fn)
 #define omap_device_initcall(fn)	omap_initcall(device_initcall, fn)
 #define omap_late_initcall(fn)		omap_initcall(late_initcall, fn)
+#define omap_late_initcall_sync(fn)	omap_initcall(late_initcall_sync, fn)
 
 #endif	/* __ASSEMBLY__ */