Merge tag 'armsoc-dt' into test-merge

ARM: SoC: DT updates for v4.2

As usual, quite a few device-tree updates in ARM land.  There was ome
minor churn in DTs due to relicensing under a dual-license, and lots
of little additions of new peripherals, features etc, but nothing
really exciting to call to your attention.  Some higlights, focsuing
on support for new SoCs and boards:

- AT91: new boards: Overkiz,  Acme Systems' Arietta G25
- tegra: HDA support
- bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U
- mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys
  boards, DLink DNS-327L
- OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50
- ARM: added support for Juno r1 board
- sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G
- imx: i.MX7D SoC support; new boards: Armadeus Systems APF6,
  Gateworks GW5510, and aristainetos2 boards
- hisilicon: hi6220 SoC support; new boards: 96boards hikey

Conflicts: None

# gpg: Signature made Wed Jun 24 21:32:14 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg:                 aka "Kevin Hilman <khilman@linaro.org>"
# gpg:                 aka "Kevin Hilman <khilman@kernel.org>"

17 files changed, 743 insertions, 151 deletions

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index ad26a752b976..38913be23695 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -4,6 +4,7 @@ dts-dirs += arm
 dts-dirs += cavium
 dts-dirs += exynos
 dts-dirs += freescale
+dts-dirs += hisilicon
 dts-dirs += mediatek
 dts-dirs += qcom
 dts-dirs += sprd
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 301a0dada1fe..c5c98b91514e 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,5 +1,5 @@
 dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 000000000000..e3ee96036eca
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,154 @@
+	/*
+	 *  Devices shared by all Juno boards
+	 */
+
+	memtimer: timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		clock-frequency = <50000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <0 60 4>;
+			reg = <0x0 0x2a830000 0x0 0x10000>;
+		};
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <2>;
+		#interrupt-cells = <3>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+		v2m_0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0 0 0 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/include/ "juno-clocks.dtsi"
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	soc_uart0: uart@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		dvi0: dvi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+		};
+
+		dvi1: dvi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+		};
+	};
+
+	ohci@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	ehci@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0 0 0  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 0 0  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 0 0  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "juno-motherboard.dtsi"
+	};
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index c9b89efe0f56..25352ed943e6 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -36,9 +36,9 @@
 		clock-output-names = "apb_pclk";
 	};
 
-	soc_faxiclk: refclk533mhz {
+	soc_faxiclk: refclk400mhz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <533000000>;
+		clock-frequency = <400000000>;
 		clock-output-names = "faxi_clk";
 	};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 351c95bda89e..fde0cfad09de 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -54,6 +54,55 @@
 				regulator-always-on;
 			};
 
+			gpio_keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				button@1 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <116>;
+					label = "POWER";
+					gpios = <&iofpga_gpio0 0 0x4>;
+				};
+				button@2 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <102>;
+					label = "HOME";
+					gpios = <&iofpga_gpio0 1 0x4>;
+				};
+				button@3 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <152>;
+					label = "RLOCK";
+					gpios = <&iofpga_gpio0 2 0x4>;
+				};
+				button@4 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <115>;
+					label = "VOL+";
+					gpios = <&iofpga_gpio0 3 0x4>;
+				};
+				button@5 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <114>;
+					label = "VOL-";
+					gpios = <&iofpga_gpio0 4 0x4>;
+				};
+				button@6 {
+					debounce_interval = <50>;
+					wakeup = <1>;
+					linux,code = <99>;
+					label = "NMI";
+					gpios = <&iofpga_gpio0 5 0x4>;
+				};
+			};
+
 			ethernet@2,00000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x00000000 0x10000>;
@@ -148,5 +197,17 @@
 					clocks = <&soc_smc50mhz>;
 					clock-names = "apb_pclk";
 				};
+
+				iofpga_gpio0: gpio@1d0000 {
+					compatible = "arm,pl061", "arm,primecell";
+					reg = <0x1d0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 000000000000..c62751153a4f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,116 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "ARM Juno development board (r1)";
+	compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A57_L2>;
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A57_L2>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>,
+				     <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+
+	#include "juno-base.dtsi"
+
+};
+
+&memtimer {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 5e9110a3353d..d7cbdd482a61 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -91,33 +91,6 @@
 		};
 	};
 
-	memory@80000000 {
-		device_type = "memory";
-		/* last 16MB of the first memory area is reserved for secure world use by firmware */
-		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
-		      <0x00000008 0x80000000 0x1 0x80000000>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,gic-400", "arm,cortex-a15-gic";
-		reg = <0x0 0x2c010000 0 0x1000>,
-		      <0x0 0x2c02f000 0 0x2000>,
-		      <0x0 0x2c04f000 0 0x2000>,
-		      <0x0 0x2c06f000 0 0x2000>;
-		#address-cells = <0>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,105 +107,5 @@
 				     <&A53_3>;
 	};
 
-	/include/ "juno-clocks.dtsi"
-
-	dma@7ff00000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x0 0x7ff00000 0 0x1000>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_faxiclk>;
-		clock-names = "apb_pclk";
-	};
-
-	soc_uart0: uart@7ff80000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x0 0x7ff80000 0x0 0x1000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
-		clock-names = "uartclk", "apb_pclk";
-	};
-
-	i2c@7ffa0000 {
-		compatible = "snps,designware-i2c";
-		reg = <0x0 0x7ffa0000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <400000>;
-		i2c-sda-hold-time-ns = <500>;
-		clocks = <&soc_smc50mhz>;
-
-		dvi0: dvi-transmitter@70 {
-			compatible = "nxp,tda998x";
-			reg = <0x70>;
-		};
-
-		dvi1: dvi-transmitter@71 {
-			compatible = "nxp,tda998x";
-			reg = <0x71>;
-		};
-	};
-
-	ohci@7ffb0000 {
-		compatible = "generic-ohci";
-		reg = <0x0 0x7ffb0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_usb48mhz>;
-	};
-
-	ehci@7ffc0000 {
-		compatible = "generic-ehci";
-		reg = <0x0 0x7ffc0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_usb48mhz>;
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-	};
-
-	smb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 15>;
-		interrupt-map = <0 0  0 &gic 0  68 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0  69 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0  70 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
-		/include/ "juno-motherboard.dtsi"
-	};
+	#include "juno-base.dtsi"
 };
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000000..fa81a6ee6473
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 000000000000..e36a539468a5
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,31 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+	model = "HiKey Development Board";
+	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 000000000000..3f03380815b6
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,171 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hi6220";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f6801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+		      <0x0 0xf6802000 0 0x2000>, /* GICC */
+		      <0x0 0xf6804000 0 0x2000>, /* GICH */
+		      <0x0 0xf6806000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ao_ctrl: ao_ctrl@f7800000 {
+			compatible = "hisilicon,hi6220-aoctrl", "syscon";
+			reg = <0x0 0xf7800000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sys_ctrl: sys_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220-sysctrl", "syscon";
+			reg = <0x0 0xf7030000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		media_ctrl: media_ctrl@f4410000 {
+			compatible = "hisilicon,hi6220-mediactrl", "syscon";
+			reg = <0x0 0xf4410000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pm_ctrl: pm_ctrl@f7032000 {
+			compatible = "hisilicon,hi6220-pmctrl", "syscon";
+			reg = <0x0 0xf7032000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: uart@f8015000 {	/* console */
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf8015000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 924fdb6673ff..27237a1c1a87 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -91,13 +91,13 @@
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc {
@@ -106,14 +106,13 @@
 		compatible = "simple-bus";
 		ranges;
 
-		syscfg_pctl_a: syscfg_pctl_a@10005000 {
-			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
-			reg = <0 0x10005000 0 0x1000>;
-		};
-
-		pio: pinctrl@0x10005000 {
+		/*
+		 * Pinctrl access register at 0x10005000 through regmap.
+		 * Register 0x1000b000 is used by EINT.
+		 */
+		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8173-pinctrl";
-			reg = <0 0x1000B000 0 0x1000>;
+			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
 			pins-are-numbered;
 			gpio-controller;
@@ -121,13 +120,18 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
 		};
 
 		sysirq: intpol-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
-					"mediatek,mt6577-sysirq";
+				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
@@ -149,7 +153,7 @@
 
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -158,7 +162,7 @@
 
 		uart1: serial@11003000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -167,7 +171,7 @@
 
 		uart2: serial@11004000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -176,13 +180,12 @@
 
 		uart3: serial@11005000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
 			status = "disabled";
 		};
 	};
-
 };
 
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
new file mode 100644
index 000000000000..535532b9287f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -0,0 +1,30 @@
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8916_gpios_default>;
+
+	pm8916_gpios_default: default {
+		usb_hub_reset_pm {
+			pins = "gpio1";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+		usb_sw_sel_pm {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+		};
+		usr_led_3_ctrl {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+		usr_led_4_ctrl {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
new file mode 100644
index 000000000000..5f7023f90df7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -0,0 +1,21 @@
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&soc_gpios_default>;
+
+	soc_gpios_default: default {
+		usr_led_1_ctrl_default: usr_led_1_ctrl_default {
+			pins = "gpio21";
+			function = "gpio";
+			output-low;
+		};
+		usr_led_2_ctrl_default: usr_led_2_ctrl_default {
+			pins = "gpio120";
+			function = "gpio";
+			output-low;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 703a4f16e711..98abece6b233 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -12,6 +12,9 @@
  */
 
 #include "msm8916.dtsi"
+#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
 
 / {
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index bea871b0df13..a1aa0b201e92 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "msm8916.dtsi"
+#include "pm8916.dtsi"
 
 / {
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index f212b8303d04..0f49ebd0aa8b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -77,7 +77,12 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
-		pinctrl@1000000 {
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x4ab000 0x4>;
+		};
+
+		msmgpio: pinctrl@1000000 {
 			compatible = "qcom,msm8916-pinctrl";
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,5 +197,23 @@
 				status = "disabled";
 			};
 		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x200f000 0x001000>,
+			      <0x2400000 0x400000>,
+			      <0x2c00000 0x400000>,
+			      <0x3800000 0x200000>,
+			      <0x200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644
index 000000000000..b222ece7e3d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,99 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	usid0: pm8916@0 {
+		compatible = "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000 0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		pm8916_gpios: gpios@c000 {
+			compatible = "qcom,pm8916-gpio";
+			reg = <0xc000 0x400>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8916_mpps: mpps@a000 {
+			compatible = "qcom,pm8916-mpp";
+			reg = <0xa000 0x400>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8916_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400 0x100>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8916_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100 0x100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			usb_in {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 10>;
+			};
+			vph_pwr {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+			};
+			die_temp {
+				reg = <VADC_DIE_TEMP>;
+			};
+			ref_625mv {
+				reg = <VADC_REF_625MV>;
+			};
+			ref_1250v {
+				reg = <VADC_REF_1250MV>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+	};
+
+	usid1: pm8916@1 {
+		compatible = "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};