Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 670 deletions

diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
deleted file mode 100644
index 0fefb86970c6..000000000000
--- a/arch/arm26/kernel/ptrace.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- *  linux/arch/arm26/kernel/ptrace.c
- *
- *  By Ross Biro 1/23/92
- * edited by Linus Torvalds
- * ARM modifications Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-//#include <asm/processor.h>
-
-#include "ptrace.h"
-
-#define REG_PC	15
-#define REG_PSR 15
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Breakpoint SWI instruction: SWI &9F0001
- */
-#define BREAKINST_ARM	0xef9f0001
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long get_user_reg(struct task_struct *task, int offset)
-{
-	return task_pt_regs(task)->uregs[offset];
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int
-put_user_reg(struct task_struct *task, int offset, long data)
-{
-	struct pt_regs newregs, *regs = task_pt_regs(task);
-	int ret = -EINVAL;
-
-	newregs = *regs;
-	newregs.uregs[offset] = data;
-
-	if (valid_user_regs(&newregs)) {
-		regs->uregs[offset] = data;
-		ret = 0;
-	}
-
-	return ret;
-}
-
-static inline int
-read_u32(struct task_struct *task, unsigned long addr, u32 *res)
-{
-	int ret;
-
-	ret = access_process_vm(task, addr, res, sizeof(*res), 0);
-
-	return ret == sizeof(*res) ? 0 : -EIO;
-}
-
-static inline int
-read_instr(struct task_struct *task, unsigned long addr, u32 *res)
-{
-	int ret;
-	u32 val;
-	ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0);
-	ret = ret == sizeof(val) ? 0 : -EIO;
-	*res = val;
-	return ret;
-}
-
-/*
- * Get value of register `rn' (in the instruction)
- */
-static unsigned long
-ptrace_getrn(struct task_struct *child, unsigned long insn)
-{
-	unsigned int reg = (insn >> 16) & 15;
-	unsigned long val;
-
-	val = get_user_reg(child, reg);
-	if (reg == 15)
-		val = pc_pointer(val + 8); //FIXME - correct for arm26?
-
-	return val;
-}
-
-/*
- * Get value of operand 2 (in an ALU instruction)
- */
-static unsigned long
-ptrace_getaluop2(struct task_struct *child, unsigned long insn)
-{
-	unsigned long val;
-	int shift;
-	int type;
-
-	if (insn & 1 << 25) {
-		val = insn & 255;
-		shift = (insn >> 8) & 15;
-		type = 3;
-	} else {
-		val = get_user_reg (child, insn & 15);
-
-		if (insn & (1 << 4))
-			shift = (int)get_user_reg (child, (insn >> 8) & 15);
-		else
-			shift = (insn >> 7) & 31;
-
-		type = (insn >> 5) & 3;
-	}
-
-	switch (type) {
-	case 0:	val <<= shift;	break;
-	case 1:	val >>= shift;	break;
-	case 2:
-		val = (((signed long)val) >> shift);
-		break;
-	case 3:
- 		val = (val >> shift) | (val << (32 - shift));
-		break;
-	}
-	return val;
-}
-
-/*
- * Get value of operand 2 (in a LDR instruction)
- */
-static unsigned long
-ptrace_getldrop2(struct task_struct *child, unsigned long insn)
-{
-	unsigned long val;
-	int shift;
-	int type;
-
-	val = get_user_reg(child, insn & 15);
-	shift = (insn >> 7) & 31;
-	type = (insn >> 5) & 3;
-
-	switch (type) {
-	case 0:	val <<= shift;	break;
-	case 1:	val >>= shift;	break;
-	case 2:
-		val = (((signed long)val) >> shift);
-		break;
-	case 3:
- 		val = (val >> shift) | (val << (32 - shift));
-		break;
-	}
-	return val;
-}
-
-#define OP_MASK	0x01e00000
-#define OP_AND	0x00000000
-#define OP_EOR	0x00200000
-#define OP_SUB	0x00400000
-#define OP_RSB	0x00600000
-#define OP_ADD	0x00800000
-#define OP_ADC	0x00a00000
-#define OP_SBC	0x00c00000
-#define OP_RSC	0x00e00000
-#define OP_ORR	0x01800000
-#define OP_MOV	0x01a00000
-#define OP_BIC	0x01c00000
-#define OP_MVN	0x01e00000
-
-static unsigned long
-get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn)
-{
-	u32 alt = 0;
-
-	switch (insn & 0x0e000000) {
-	case 0x00000000:
-	case 0x02000000: {
-		/*
-		 * data processing
-		 */
-		long aluop1, aluop2, ccbit;
-
-		if ((insn & 0xf000) != 0xf000)
-			break;
-
-		aluop1 = ptrace_getrn(child, insn);
-		aluop2 = ptrace_getaluop2(child, insn);
-		ccbit  = get_user_reg(child, REG_PSR) & PSR_C_BIT ? 1 : 0;
-
-		switch (insn & OP_MASK) {
-		case OP_AND: alt = aluop1 & aluop2;		break;
-		case OP_EOR: alt = aluop1 ^ aluop2;		break;
-		case OP_SUB: alt = aluop1 - aluop2;		break;
-		case OP_RSB: alt = aluop2 - aluop1;		break;
-		case OP_ADD: alt = aluop1 + aluop2;		break;
-		case OP_ADC: alt = aluop1 + aluop2 + ccbit;	break;
-		case OP_SBC: alt = aluop1 - aluop2 + ccbit;	break;
-		case OP_RSC: alt = aluop2 - aluop1 + ccbit;	break;
-		case OP_ORR: alt = aluop1 | aluop2;		break;
-		case OP_MOV: alt = aluop2;			break;
-		case OP_BIC: alt = aluop1 & ~aluop2;		break;
-		case OP_MVN: alt = ~aluop2;			break;
-		}
-		break;
-	}
-
-	case 0x04000000:
-	case 0x06000000:
-		/*
-		 * ldr
-		 */
-		if ((insn & 0x0010f000) == 0x0010f000) {
-			unsigned long base;
-
-			base = ptrace_getrn(child, insn);
-			if (insn & 1 << 24) {
-				long aluop2;
-
-				if (insn & 0x02000000)
-					aluop2 = ptrace_getldrop2(child, insn);
-				else
-					aluop2 = insn & 0xfff;
-
-				if (insn & 1 << 23)
-					base += aluop2;
-				else
-					base -= aluop2;
-			}
-			if (read_u32(child, base, &alt) == 0)
-				alt = pc_pointer(alt);
-		}
-		break;
-
-	case 0x08000000:
-		/*
-		 * ldm
-		 */
-		if ((insn & 0x00108000) == 0x00108000) {
-			unsigned long base;
-			unsigned int nr_regs;
-
-			if (insn & (1 << 23)) {
-				nr_regs = hweight16(insn & 65535) << 2;
-
-				if (!(insn & (1 << 24)))
-					nr_regs -= 4;
-			} else {
-				if (insn & (1 << 24))
-					nr_regs = -4;
-				else
-					nr_regs = 0;
-			}
-
-			base = ptrace_getrn(child, insn);
-
-			if (read_u32(child, base + nr_regs, &alt) == 0)
-				alt = pc_pointer(alt);
-			break;
-		}
-		break;
-
-	case 0x0a000000: {
-		/*
-		 * bl or b
-		 */
-		signed long displ;
-		/* It's a branch/branch link: instead of trying to
-		 * figure out whether the branch will be taken or not,
-		 * we'll put a breakpoint at both locations.  This is
-		 * simpler, more reliable, and probably not a whole lot
-		 * slower than the alternative approach of emulating the
-		 * branch.
-		 */
-		displ = (insn & 0x00ffffff) << 8;
-		displ = (displ >> 6) + 8;
-		if (displ != 0 && displ != 4)
-			alt = pc + displ;
-	    }
-	    break;
-	}
-
-	return alt;
-}
-
-static int
-swap_insn(struct task_struct *task, unsigned long addr,
-	  void *old_insn, void *new_insn, int size)
-{
-	int ret;
-
-	ret = access_process_vm(task, addr, old_insn, size, 0);
-	if (ret == size)
-		ret = access_process_vm(task, addr, new_insn, size, 1);
-	return ret;
-}
-
-static void
-add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr)
-{
-	int nr = dbg->nsaved;
-
-	if (nr < 2) {
-		u32 new_insn = BREAKINST_ARM;
-		int res;
-
-		res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4);
-
-		if (res == 4) {
-			dbg->bp[nr].address = addr;
-			dbg->nsaved += 1;
-		}
-	} else
-		printk(KERN_ERR "ptrace: too many breakpoints\n");
-}
-
-/*
- * Clear one breakpoint in the user program.  We copy what the hardware
- * does and use bit 0 of the address to indicate whether this is a Thumb
- * breakpoint or an ARM breakpoint.
- */
-static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp)
-{
-	unsigned long addr = bp->address;
-	u32 old_insn;
-	int ret;
-
-	ret = swap_insn(task, addr & ~3, &old_insn,
-			&bp->insn, 4);
-
-	if (ret != 4 || old_insn != BREAKINST_ARM)
-		printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at "
-			"0x%08lx (0x%08x)\n", task->comm, task->pid,
-			addr, old_insn);
-}
-
-void ptrace_set_bpt(struct task_struct *child)
-{
-	struct pt_regs *regs;
-	unsigned long pc;
-	u32 insn;
-	int res;
-
-	regs = task_pt_regs(child);
-	pc = instruction_pointer(regs);
-
-	res = read_instr(child, pc, &insn);
-	if (!res) {
-		struct debug_info *dbg = &child->thread.debug;
-		unsigned long alt;
-
-		dbg->nsaved = 0;
-
-		alt = get_branch_address(child, pc, insn);
-		if (alt)
-			add_breakpoint(child, dbg, alt);
-
-		/*
-		 * Note that we ignore the result of setting the above
-		 * breakpoint since it may fail.  When it does, this is
-		 * not so much an error, but a forewarning that we may
-		 * be receiving a prefetch abort shortly.
-		 *
-		 * If we don't set this breakpoint here, then we can
-		 * lose control of the thread during single stepping.
-		 */
-		if (!alt || predicate(insn) != PREDICATE_ALWAYS)
-			add_breakpoint(child, dbg, pc + 4);
-	}
-}
-
-/*
- * Ensure no single-step breakpoint is pending.  Returns non-zero
- * value if child was being single-stepped.
- */
-void ptrace_cancel_bpt(struct task_struct *child)
-{
-	int i, nsaved = child->thread.debug.nsaved;
-
-	child->thread.debug.nsaved = 0;
-
-	if (nsaved > 2) {
-		printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
-		nsaved = 2;
-	}
-
-	for (i = 0; i < nsaved; i++)
-		clear_breakpoint(child, &child->thread.debug.bp[i]);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
-	child->ptrace &= ~PT_SINGLESTEP;
-	ptrace_cancel_bpt(child);
-}
-
-/*
- * Handle hitting a breakpoint.
- */
-void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
-{
-	siginfo_t info;
-
-	/*
-	 * The PC is always left pointing at the next instruction.  Fix this.
-	 */
-	regs->ARM_pc -= 4;
-
-	if (tsk->thread.debug.nsaved == 0)
-		printk(KERN_ERR "ptrace: bogus breakpoint trap\n");
-
-	ptrace_cancel_bpt(tsk);
-
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code  = TRAP_BRKPT;
-	info.si_addr  = (void *)instruction_pointer(regs) - 4;
-
-	force_sig_info(SIGTRAP, &info, tsk);
-}
-
-/*
- * Read the word at offset "off" into the "struct user".  We
- * actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
-			    unsigned long *ret)
-{
-	unsigned long tmp;
-
-	if (off & 3 || off >= sizeof(struct user))
-		return -EIO;
-
-	tmp = 0;
-	if (off < sizeof(struct pt_regs))
-		tmp = get_user_reg(tsk, off >> 2);
-
-	return put_user(tmp, ret);
-}
-
-/*
- * Write the word at offset "off" into "struct user".  We
- * actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
-			     unsigned long val)
-{
-	if (off & 3 || off >= sizeof(struct user))
-		return -EIO;
-
-	if (off >= sizeof(struct pt_regs))
-		return 0;
-
-	return put_user_reg(tsk, off >> 2, val);
-}
-
-/*
- * Get all user integer registers.
- */
-static int ptrace_getregs(struct task_struct *tsk, void *uregs)
-{
-	struct pt_regs *regs = task_pt_regs(tsk);
-
-	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/*
- * Set all user integer registers.
- */
-static int ptrace_setregs(struct task_struct *tsk, void *uregs)
-{
-	struct pt_regs newregs;
-	int ret;
-
-	ret = -EFAULT;
-	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
-		struct pt_regs *regs = task_pt_regs(tsk);
-
-		ret = -EINVAL;
-		if (valid_user_regs(&newregs)) {
-			*regs = newregs;
-			ret = 0;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * Get the child FPU state.
- */
-static int ptrace_getfpregs(struct task_struct *tsk, void *ufp)
-{
-	return copy_to_user(ufp, &task_thread_info(tsk)->fpstate,
-			    sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
-/*
- * Set the child FPU state.
- */
-static int ptrace_setfpregs(struct task_struct *tsk, void *ufp)
-{
-	set_stopped_child_used_math(tsk);
-	return copy_from_user(&task_thread_info(tsk)->fpstate, ufp,
-			      sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	int ret;
-
-	switch (request) {
-		/*
-		 * read word at location "addr" in the child process.
-		 */
-		case PTRACE_PEEKTEXT:
-		case PTRACE_PEEKDATA:
-			ret = generic_ptrace_peekdata(child, addr, data);
-			break;
-
-		case PTRACE_PEEKUSR:
-			ret = ptrace_read_user(child, addr, (unsigned long *)data);
-			break;
-
-		/*
-		 * write the word at location addr.
-		 */
-		case PTRACE_POKETEXT:
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
-		case PTRACE_POKEUSR:
-			ret = ptrace_write_user(child, addr, data);
-			break;
-
-		/*
-		 * continue/restart and stop at next (return from) syscall
-		 */
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* make sure single-step breakpoint is gone. */
-			child->ptrace &= ~PT_SINGLESTEP;
-			ptrace_cancel_bpt(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-		case PTRACE_KILL:
-			/* make sure single-step breakpoint is gone. */
-			child->ptrace &= ~PT_SINGLESTEP;
-			ptrace_cancel_bpt(child);
-			if (child->exit_state != EXIT_ZOMBIE) {
-				child->exit_code = SIGKILL;
-				wake_up_process(child);
-			}
-			ret = 0;
-			break;
-
-		/*
-		 * execute single instruction.
-		 */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			child->ptrace |= PT_SINGLESTEP;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		case PTRACE_DETACH:
-			ret = ptrace_detach(child, data);
-			break;
-
-		case PTRACE_GETREGS:
-			ret = ptrace_getregs(child, (void *)data);
-			break;
-
-		case PTRACE_SETREGS:
-			ret = ptrace_setregs(child, (void *)data);
-			break;
-
-		case PTRACE_GETFPREGS:
-			ret = ptrace_getfpregs(child, (void *)data);
-			break;
-		
-		case PTRACE_SETFPREGS:
-			ret = ptrace_setfpregs(child, (void *)data);
-			break;
-
-		default:
-			ret = ptrace_request(child, request, addr, data);
-			break;
-	}
-
-	return ret;
-}
-
-asmlinkage void syscall_trace(int why, struct pt_regs *regs)
-{
-	unsigned long ip;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	regs->ARM_ip = ip;
-}