Merge branch 'next/cleanup-plat-s5p' into next/devel-exynos5250-1

15 files changed, 1734 insertions, 96 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a0ffc77da809..f8c571031da8 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,24 @@ config PLAT_SAMSUNG
 	help
 	  Base platform code for all Samsung SoC based systems
 
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	default y
+	select ARM_VIC if !ARCH_EXYNOS
+	select ARM_GIC if ARCH_EXYNOS
+	select GIC_NON_BANKED if ARCH_EXYNOS4
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S5P_GPIO_DRVSTR
+	select SAMSUNG_GPIOLIB_4BIT
+	select PLAT_SAMSUNG
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	help
+	  Base platform code for Samsung's S5P series SoC.
+
 if PLAT_SAMSUNG
 
 # boot configurations
@@ -50,6 +68,14 @@ config S3C_LOWLEVEL_UART_PORT
 	  this configuration should be between zero and two. The port
 	  must have been initialised by the boot-loader before use.
 
+# timer options
+
+config S5P_HRT
+	bool
+	select SAMSUNG_DEV_PWM
+	help
+	  Use the High Resolution timer support
+
 # clock options
 
 config SAMSUNG_CLKSRC
@@ -58,6 +84,11 @@ config SAMSUNG_CLKSRC
 	  Select the clock code for the clksrc implementation
 	  used by newer systems such as the S3C64XX.
 
+config S5P_CLOCK
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	help
+	  Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
 # options for IRQ support
 
 config SAMSUNG_IRQ_VIC_TIMER
@@ -65,6 +96,22 @@ config SAMSUNG_IRQ_VIC_TIMER
        help
          Internal configuration to build the VIC timer interrupt code.
 
+config S5P_IRQ
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	help
+	  Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+	bool
+	help
+	  Common code for the GPIO interrupts (other than external interrupts.)
+
 # options for gpio configuration support
 
 config SAMSUNG_GPIOLIB_4BIT
@@ -117,6 +164,12 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
+# uart options
+
+config S5P_DEV_UART
+	def_bool y
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
 # ADC driver
 
 config S3C_ADC
@@ -274,6 +327,76 @@ config SAMSUNG_DEV_BACKLIGHT
 	help
 	  Compile in platform device definition LCD backlight with PWM Timer
 
+config S5P_DEV_CSIS0
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+	bool
+	help
+	  Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+	bool
+	help
+	  Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+	bool
+	help
+	  Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+	bool
+	help
+	  Compile in platform device definition for USB EHCI
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
@@ -281,6 +404,11 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
+config S5P_SETUP_MIPIPHY
+	bool
+	help
+	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
 # DMA
 
 config S3C_DMA
@@ -351,6 +479,18 @@ config SAMSUNG_WAKEMASK
 	  and above. This code allows a set of interrupt to wakeup-mask
 	  mappings. See <plat/wakeup-mask.h>
 
+config S5P_PM
+	bool
+	help
+	  Common code for power management support on S5P and newer SoCs
+	  Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+	bool
+	help
+	  Internal config node to apply common S5P sleep management code.
+	  Can be selected by S5P and newer SoCs with similar sleep procedure.
+
 comment "Power Domain"
 
 config SAMSUNG_PD
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 6012366f33cb..860b2db4db15 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -13,12 +13,18 @@ obj-				:=
 
 obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
+obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
+
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK)		+= s5p-clock.o
 
 obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
 
 # ADC
 
@@ -30,9 +36,13 @@ obj-y				+= platformdata.o
 
 obj-y				+= devs.o
 obj-y				+= dev-uart.o
+obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
+obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
+
 # DMA support
 
 obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
@@ -47,6 +57,9 @@ obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 
+obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o
+
 # PD support
 
 obj-$(CONFIG_SAMSUNG_PD)	+= pd.o
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 2155d4af62a3..4067d1dd7f1c 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -133,7 +133,6 @@ extern struct platform_device exynos4_device_pcm1;
 extern struct platform_device exynos4_device_pcm2;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
 
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
diff --git a/arch/arm/plat-samsung/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h
deleted file mode 100644
index 5fe8ee01a5ba..000000000000
--- a/arch/arm/plat-samsung/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
-	SYSMMU_PAGEFAULT,
-	SYSMMU_AR_MULTIHIT,
-	SYSMMU_AW_MULTIHIT,
-	SYSMMU_BUSERROR,
-	SYSMMU_AR_SECURITY,
-	SYSMMU_AR_ACCESS,
-	SYSMMU_AW_SECURITY,
-	SYSMMU_AW_PROTECTION, /* 7 */
-	SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- *               SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- *         zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c
new file mode 100644
index 000000000000..41d3dfd5dddb
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+};
+
+struct clk s5p_clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+	.name		= "fout_bpll",
+	.id		= -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+	.name		= "fout_cpll",
+	.id		= -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+	.name		= "fout_mpll",
+	.id		= -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+	.name		= "fout_dpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+	.name		= "fout_vpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+	.sources	= clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+	[0] = &clk_fin_cpll,
+	[1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+	.sources	= clk_src_cpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_cpll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+	[0] = &clk_fin_dpll,
+	[1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+	.sources	= clk_src_dpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
+};
+
+struct clk clk_vpll = {
+	.name		= "vpll",
+	.id		= -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+	__raw_writel(con, reg);
+	return 0;
+}
+
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+unsigned long s5p_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(pclk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+struct clk_ops s5p_sclk_spdif_ops = {
+	.set_rate	= s5p_spdif_set_rate,
+	.get_rate	= s5p_spdif_get_rate,
+};
+
+static struct clk *s5p_clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_48m,
+	&s5p_clk_27m,
+	&clk_fout_apll,
+	&clk_fout_mpll,
+	&clk_fout_epll,
+	&clk_fout_dpll,
+	&clk_fout_vpll,
+	&clk_vpll,
+	&clk_xusbxti,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+	int ret;
+
+	clk_ext_xtal_mux.rate = xtal_freq;
+
+	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register s5p clocks\n");
+}
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
new file mode 100644
index 000000000000..ad6089465e2a
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+#include <plat/mfc.h>
+
+struct s5p_mfc_reserved_mem {
+	phys_addr_t	base;
+	unsigned long	size;
+	struct device	*dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize)
+{
+	int i;
+
+	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+	s5p_mfc_mem[0].base = rbase;
+	s5p_mfc_mem[0].size = rsize;
+
+	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+	s5p_mfc_mem[1].base = lbase;
+	s5p_mfc_mem[1].size = lsize;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (memblock_remove(area->base, area->size)) {
+			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+			area->base = 0;
+		}
+	}
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (!area->base)
+			continue;
+
+		if (dma_declare_coherent_memory(area->dev, area->base,
+				area->base, area->size,
+				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+	}
+	return 0;
+}
+device_initcall(s5p_mfc_memory_init);
diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
new file mode 100644
index 000000000000..cafa3deddcc1
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-dev-uart.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s5p_uart1_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s5p_uart2_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
+#endif
+};
+
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART4),
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART5),
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5p_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5p_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5p_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5p_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
+	},
+	[4] = {
+		.resources	= s5p_uart4_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
+	},
+	[5] = {
+		.resources	= s5p_uart5_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
+	},
+};
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
new file mode 100644
index 000000000000..33bd3f3d20f5
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static inline void s5p_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_maskack(struct irq_data *data)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(data);
+	s5p_irq_eint_ack(data);
+}
+
+static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.irq_mask	= s5p_irq_eint_mask,
+	.irq_unmask	= s5p_irq_eint_unmask,
+	.irq_mask_ack	= s5p_irq_eint_maskack,
+	.irq_ack	= s5p_irq_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(data);
+
+	s5p_irq_eint_mask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(struct irq_data *data)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(data);
+
+	s5p_irq_eint_unmask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(struct irq_data *data)
+{
+	s5p_irq_vic_eint_mask(data);
+	s5p_irq_vic_eint_ack(data);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.irq_mask	= s5p_irq_vic_eint_mask,
+	.irq_unmask	= s5p_irq_vic_eint_unmask,
+	.irq_mask_ack	= s5p_irq_vic_eint_maskack,
+	.irq_ack	= s5p_irq_vic_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+static int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		irq_set_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
new file mode 100644
index 000000000000..f9431fe5b06e
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#include <asm/mach/irq.h>
+
+#define GPIO_BASE(chip)		(((unsigned long)(chip)->base) & 0xFFFFF000u)
+
+#define CON_OFFSET		0x700
+#define MASK_OFFSET		0x900
+#define PEND_OFFSET		0xA00
+#define REG_OFFSET(x)		((x) << 2)
+
+struct s5p_gpioint_bank {
+	struct list_head	list;
+	int			start;
+	int			nr_groups;
+	int			irq;
+	struct samsung_gpio_chip	**chips;
+	void			(*handler)(unsigned int, struct irq_desc *);
+};
+
+static LIST_HEAD(banks);
+
+static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	unsigned int shift = (d->irq - gc->irq_base) << 2;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		type = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+	case IRQ_TYPE_NONE:
+	default:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	}
+
+	gc->type_cache &= ~(0x7 << shift);
+	gc->type_cache |= type << shift;
+	writel(gc->type_cache, gc->reg_base + ct->regs.type);
+	return 0;
+}
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
+	int group, pend_offset, mask_offset;
+	unsigned int pend, mask;
+
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+
+	for (group = 0; group < bank->nr_groups; group++) {
+		struct samsung_gpio_chip *chip = bank->chips[group];
+		if (!chip)
+			continue;
+
+		pend_offset = REG_OFFSET(group);
+		pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = REG_OFFSET(group);
+		mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
+		pend &= ~mask;
+
+		while (pend) {
+			int offset = fls(pend) - 1;
+			int real_irq = chip->irq_base + offset;
+			generic_handle_irq(real_irq);
+			pend &= ~BIT(offset);
+		}
+	}
+	chained_irq_exit(chip, desc);
+}
+
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
+{
+	static int used_gpioint_groups = 0;
+	int group = chip->group;
+	struct s5p_gpioint_bank *b, *bank = NULL;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+		return -ENOMEM;
+
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
+			break;
+		}
+	}
+	if (!bank)
+		return -EINVAL;
+
+	if (!bank->handler) {
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
+				      bank->nr_groups, GFP_KERNEL);
+		if (!bank->chips)
+			return -ENOMEM;
+
+		irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
+		irq_set_handler_data(bank->irq, bank);
+		bank->handler = s5p_gpioint_handler;
+		printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
+		       bank->irq);
+	}
+
+	/*
+	 * chained GPIO irq has been successfully registered, allocate new gpio
+	 * int group and assign irq nubmers
+	 */
+	chip->irq_base = S5P_GPIOINT_BASE +
+			 used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+	used_gpioint_groups++;
+
+	bank->chips[group - bank->start] = chip;
+
+	gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
+				    (void __iomem *)GPIO_BASE(chip),
+				    handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = s5p_gpioint_set_type,
+	ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
+	ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
+	ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
+	irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
+	int offset, group;
+	int ret;
+
+	if (!my_chip)
+		return -EINVAL;
+
+	offset = pin - my_chip->chip.base;
+	group = my_chip->group;
+
+	/* check if the group has been already registered */
+	if (my_chip->irq_base)
+		return my_chip->irq_base + offset;
+
+	/* register gpio group */
+	ret = s5p_gpioint_add(my_chip);
+	if (ret == 0) {
+		my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+		printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+		       group);
+		return my_chip->irq_base + offset;
+	}
+	return ret;
+}
+
+int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
+{
+	struct s5p_gpioint_bank *bank;
+
+	bank = kzalloc(sizeof(*bank), GFP_KERNEL);
+	if (!bank)
+		return -ENOMEM;
+
+	bank->start = start;
+	bank->nr_groups = nr_groups;
+	bank->irq = chain_irq;
+
+	list_add_tail(&bank->list, &banks);
+	return 0;
+}
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
new file mode 100644
index 000000000000..7c1e3b7072fc
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 0x00000006L;
+unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long irqbit;
+	unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+	if (soc_is_exynos5250()) {
+		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+	} else {
+		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+	}
+#else
+	irq_rtc_tic = IRQ_RTC_TIC;
+	irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
+
+		if (!state)
+			s3c_irqwake_intmask |= irqbit;
+		else
+			s3c_irqwake_intmask &= ~irqbit;
+	} else {
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static struct sleep_save eint_save[] = {
+	SAVE_ITEM(S5P_EINT_CON(0)),
+	SAVE_ITEM(S5P_EINT_CON(1)),
+	SAVE_ITEM(S5P_EINT_CON(2)),
+	SAVE_ITEM(S5P_EINT_CON(3)),
+
+	SAVE_ITEM(S5P_EINT_FLTCON(0)),
+	SAVE_ITEM(S5P_EINT_FLTCON(1)),
+	SAVE_ITEM(S5P_EINT_FLTCON(2)),
+	SAVE_ITEM(S5P_EINT_FLTCON(3)),
+	SAVE_ITEM(S5P_EINT_FLTCON(4)),
+	SAVE_ITEM(S5P_EINT_FLTCON(5)),
+	SAVE_ITEM(S5P_EINT_FLTCON(6)),
+	SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+	SAVE_ITEM(S5P_EINT_MASK(0)),
+	SAVE_ITEM(S5P_EINT_MASK(1)),
+	SAVE_ITEM(S5P_EINT_MASK(2)),
+	SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(void)
+{
+	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+	return 0;
+}
+
+void s3c24xx_irq_resume(void)
+{
+	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+}
+
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
new file mode 100644
index 000000000000..dfb47d638f03
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+#ifdef CONFIG_ARM_VIC
+	int irq;
+
+	/* initialize the VICs */
+	for (irq = 0; irq < num_vic; irq++)
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
+
+	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
diff --git a/arch/arm/plat-samsung/s5p-pm.c b/arch/arm/plat-samsung/s5p-pm.c
new file mode 100644
index 000000000000..0747468f0936
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-pm.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+	/* nothing here yet */
+}
+
diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
new file mode 100644
index 000000000000..bdf6dadf8790
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-sleep.S
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ *	Ben Dooks, (c) 2008 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ *	 The following code is located into the .data section. This is to
+ *	 allow l2x0_regs_phys to be accessed with a relative load while we
+ *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
+ *	 in the .text section as well, but some setups might insist on it to
+ *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+	.data
+	.align
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 */
+
+ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	adr	r0, l2x0_regs_phys
+	ldr	r0, [r0]
+	ldr	r1, [r0, #L2X0_R_PHY_BASE]
+	ldr	r2, [r1, #L2X0_CTRL]
+	tst	r2, #0x1
+	bne	resume_l2on
+	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
+	str	r2, [r1, #L2X0_AUX_CTRL]
+	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
+	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
+	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
+	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
+	str	r2, [r1, #L2X0_POWER_CTRL]
+	mov	r2, #1
+	str	r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
+	b	cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	.globl l2x0_regs_phys
+l2x0_regs_phys:
+	.long	0
+#endif
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
new file mode 100644
index 000000000000..028b6e877eb9
--- /dev/null
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -0,0 +1,405 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common hr-timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/sched_clock.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+#include <plat/s5p-time.h>
+
+static struct clk *tin_event;
+static struct clk *tin_source;
+static struct clk *tdiv_event;
+static struct clk *tdiv_source;
+static struct clk *timerclk;
+static struct s5p_timer_source timer_source;
+static unsigned long clock_count_per_tick;
+static void s5p_timer_resume(void);
+
+static void s5p_time_stop(enum s5p_timer_mode mode)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (mode) {
+	case S5P_PWM0:
+		tcon &= ~S3C2410_TCON_T0START;
+		break;
+
+	case S5P_PWM1:
+		tcon &= ~S3C2410_TCON_T1START;
+		break;
+
+	case S5P_PWM2:
+		tcon &= ~S3C2410_TCON_T2START;
+		break;
+
+	case S5P_PWM3:
+		tcon &= ~S3C2410_TCON_T3START;
+		break;
+
+	case S5P_PWM4:
+		tcon &= ~S3C2410_TCON_T4START;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	tcnt--;
+
+	switch (mode) {
+	case S5P_PWM0:
+		tcon &= ~(0x0f << 0);
+		tcon |= S3C2410_TCON_T0MANUALUPD;
+		break;
+
+	case S5P_PWM1:
+		tcon &= ~(0x0f << 8);
+		tcon |= S3C2410_TCON_T1MANUALUPD;
+		break;
+
+	case S5P_PWM2:
+		tcon &= ~(0x0f << 12);
+		tcon |= S3C2410_TCON_T2MANUALUPD;
+		break;
+
+	case S5P_PWM3:
+		tcon &= ~(0x0f << 16);
+		tcon |= S3C2410_TCON_T3MANUALUPD;
+		break;
+
+	case S5P_PWM4:
+		tcon &= ~(0x07 << 20);
+		tcon |= S3C2410_TCON_T4MANUALUPD;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+
+	__raw_writel(tcnt, S3C2410_TCNTB(mode));
+	__raw_writel(tcnt, S3C2410_TCMPB(mode));
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+{
+	unsigned long tcon;
+
+	tcon  = __raw_readl(S3C2410_TCON);
+
+	switch (mode) {
+	case S5P_PWM0:
+		tcon |= S3C2410_TCON_T0START;
+		tcon &= ~S3C2410_TCON_T0MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T0RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T0RELOAD;
+		break;
+
+	case S5P_PWM1:
+		tcon |= S3C2410_TCON_T1START;
+		tcon &= ~S3C2410_TCON_T1MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T1RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T1RELOAD;
+		break;
+
+	case S5P_PWM2:
+		tcon |= S3C2410_TCON_T2START;
+		tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T2RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T2RELOAD;
+		break;
+
+	case S5P_PWM3:
+		tcon |= S3C2410_TCON_T3START;
+		tcon &= ~S3C2410_TCON_T3MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T3RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T3RELOAD;
+		break;
+
+	case S5P_PWM4:
+		tcon |= S3C2410_TCON_T4START;
+		tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T4RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T4RELOAD;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static int s5p_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	s5p_time_setup(timer_source.event_id, cycles);
+	s5p_time_start(timer_source.event_id, NON_PERIODIC);
+
+	return 0;
+}
+
+static void s5p_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	s5p_time_stop(timer_source.event_id);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		s5p_time_setup(timer_source.event_id, clock_count_per_tick);
+		s5p_time_start(timer_source.event_id, PERIODIC);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		s5p_timer_resume();
+		break;
+	}
+}
+
+static void s5p_timer_resume(void)
+{
+	/* event timer restart */
+	s5p_time_setup(timer_source.event_id, clock_count_per_tick);
+	s5p_time_start(timer_source.event_id, PERIODIC);
+
+	/* source timer restart */
+	s5p_time_setup(timer_source.source_id, TCNT_MAX);
+	s5p_time_start(timer_source.source_id, PERIODIC);
+}
+
+void __init s5p_set_timer_source(enum s5p_timer_mode event,
+				 enum s5p_timer_mode source)
+{
+	s3c_device_timer[event].dev.bus = &platform_bus_type;
+	s3c_device_timer[source].dev.bus = &platform_bus_type;
+
+	timer_source.event_id = event;
+	timer_source.source_id = source;
+}
+
+static struct clock_event_device time_event_device = {
+	.name		= "s5p_event_timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.set_next_event	= s5p_set_next_event,
+	.set_mode	= s5p_set_mode,
+};
+
+static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction s5p_clock_event_irq = {
+	.name		= "s5p_time_irq",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= s5p_clock_event_isr,
+	.dev_id		= &time_event_device,
+};
+
+static void __init s5p_clockevent_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+	unsigned int irq_number;
+	struct clk *tscaler;
+
+	pclk = clk_get_rate(timerclk);
+
+	tscaler = clk_get_parent(tdiv_event);
+
+	clk_set_rate(tscaler, pclk / 2);
+	clk_set_rate(tdiv_event, pclk / 2);
+	clk_set_parent(tin_event, tdiv_event);
+
+	clock_rate = clk_get_rate(tin_event);
+	clock_count_per_tick = clock_rate / HZ;
+
+	clockevents_calc_mult_shift(&time_event_device,
+				    clock_rate, S5PTIMER_MIN_RANGE);
+	time_event_device.max_delta_ns =
+		clockevent_delta2ns(-1, &time_event_device);
+	time_event_device.min_delta_ns =
+		clockevent_delta2ns(1, &time_event_device);
+
+	time_event_device.cpumask = cpumask_of(0);
+	clockevents_register_device(&time_event_device);
+
+	irq_number = timer_source.event_id + IRQ_TIMER0;
+	setup_irq(irq_number, &s5p_clock_event_irq);
+}
+
+static void __iomem *s5p_timer_reg(void)
+{
+	unsigned long offset = 0;
+
+	switch (timer_source.source_id) {
+	case S5P_PWM0:
+	case S5P_PWM1:
+	case S5P_PWM2:
+	case S5P_PWM3:
+		offset = (timer_source.source_id * 0x0c) + 0x14;
+		break;
+
+	case S5P_PWM4:
+		offset = 0x40;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+		return NULL;
+	}
+
+	return S3C_TIMERREG(offset);
+}
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by U300 implementation.)
+ */
+static u32 notrace s5p_read_sched_clock(void)
+{
+	void __iomem *reg = s5p_timer_reg();
+
+	if (!reg)
+		return 0;
+
+	return ~__raw_readl(reg);
+}
+
+static void __init s5p_clocksource_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+
+	pclk = clk_get_rate(timerclk);
+
+	clk_set_rate(tdiv_source, pclk / 2);
+	clk_set_parent(tin_source, tdiv_source);
+
+	clock_rate = clk_get_rate(tin_source);
+
+	s5p_time_setup(timer_source.source_id, TCNT_MAX);
+	s5p_time_start(timer_source.source_id, PERIODIC);
+
+	setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+
+	if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
+			clock_rate, 250, 32, clocksource_mmio_readl_down))
+		panic("s5p_clocksource_timer: can't register clocksource\n");
+}
+
+static void __init s5p_timer_resources(void)
+{
+
+	unsigned long event_id = timer_source.event_id;
+	unsigned long source_id = timer_source.source_id;
+	char devname[15];
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get timers clock for timer");
+
+	clk_enable(timerclk);
+
+	sprintf(devname, "s3c24xx-pwm.%lu", event_id);
+	s3c_device_timer[event_id].id = event_id;
+	s3c_device_timer[event_id].dev.init_name = devname;
+
+	tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
+	if (IS_ERR(tin_event))
+		panic("failed to get pwm-tin clock for event timer");
+
+	tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
+	if (IS_ERR(tdiv_event))
+		panic("failed to get pwm-tdiv clock for event timer");
+
+	clk_enable(tin_event);
+
+	sprintf(devname, "s3c24xx-pwm.%lu", source_id);
+	s3c_device_timer[source_id].id = source_id;
+	s3c_device_timer[source_id].dev.init_name = devname;
+
+	tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
+	if (IS_ERR(tin_source))
+		panic("failed to get pwm-tin clock for source timer");
+
+	tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
+	if (IS_ERR(tdiv_source))
+		panic("failed to get pwm-tdiv clock for source timer");
+
+	clk_enable(tin_source);
+}
+
+static void __init s5p_timer_init(void)
+{
+	s5p_timer_resources();
+	s5p_clockevent_init();
+	s5p_clocksource_init();
+}
+
+struct sys_timer s5p_timer = {
+	.init		= s5p_timer_init,
+};
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
new file mode 100644
index 000000000000..683c466c0e6a
--- /dev/null
+++ b/arch/arm/plat-samsung/setup-mipiphy.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <mach/regs-clock.h>
+
+static int __s5p_mipi_phy_control(struct platform_device *pdev,
+				  bool on, u32 reset)
+{
+	static DEFINE_SPINLOCK(lock);
+	void __iomem *addr;
+	unsigned long flags;
+	int pid;
+	u32 cfg;
+
+	if (!pdev)
+		return -EINVAL;
+
+	pid = (pdev->id == -1) ? 0 : pdev->id;
+
+	if (pid != 0 && pid != 1)
+		return -EINVAL;
+
+	addr = S5P_MIPI_DPHY_CONTROL(pid);
+
+	spin_lock_irqsave(&lock, flags);
+
+	cfg = __raw_readl(addr);
+	cfg = on ? (cfg | reset) : (cfg & ~reset);
+	__raw_writel(cfg, addr);
+
+	if (on) {
+		cfg |= S5P_MIPI_DPHY_ENABLE;
+	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
+			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
+		cfg &= ~S5P_MIPI_DPHY_ENABLE;
+	}
+
+	__raw_writel(cfg, addr);
+	spin_unlock_irqrestore(&lock, flags);
+
+	return 0;
+}
+
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
+{
+	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
+}
+
+int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
+{
+	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
+}