Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony

1 files changed, 11 insertions, 26 deletions

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 10b3b4c63372..e2c8eebe6b3a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
@@ -30,8 +31,8 @@
 #include <plat/cpu.h>
 #include <plat/vram.h>
 
-#include <plat/control.h>
-
+#include "sram.h"
+#include "fb.h"
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
 # include "../mach-omap2/cm.h"
@@ -53,7 +54,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
@@ -68,7 +69,6 @@
 #define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
 #define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
 #define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -79,12 +79,6 @@ static unsigned long omap_sram_base;
 static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
-					 unsigned long sram_vstart,
-					 unsigned long sram_size,
-					 unsigned long pstart_avail,
-					 unsigned long size_avail);
-
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
  * SRAM varies.  The default accessible size for all device types is 2k. A GP
@@ -93,16 +87,7 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
  */
 static int is_sram_locked(void)
 {
-	int type = 0;
-
-	if (cpu_is_omap44xx())
-		/* Not yet supported */
-		return 0;
-
-	if (cpu_is_omap242x())
-		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
-
-	if (type == GP_DEVICE) {
+	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
 			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
@@ -127,7 +112,7 @@ static int is_sram_locked(void)
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
  */
-void __init omap_detect_sram(void)
+static void __init omap_detect_sram(void)
 {
 	unsigned long reserved;
 
@@ -213,7 +198,7 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
 /*
  * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
-void __init omap_map_sram(void)
+static void __init omap_map_sram(void)
 {
 	unsigned long base;
 
@@ -330,7 +315,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2420
-int __init omap242x_sram_init(void)
+static int __init omap242x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
 					omap242x_sram_ddr_init_sz);
@@ -351,7 +336,7 @@ static inline int omap242x_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-int __init omap243x_sram_init(void)
+static int __init omap243x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
 					omap243x_sram_ddr_init_sz);
@@ -407,7 +392,7 @@ void omap3_sram_restore_context(void)
 }
 #endif /* CONFIG_PM */
 
-int __init omap34xx_sram_init(void)
+static int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
@@ -423,7 +408,7 @@ static inline int omap34xx_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-int __init omap44xx_sram_init(void)
+static int __init omap44xx_sram_init(void)
 {
 	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);