ARM: tegra: remove board (but not DT) support for Paz00

Paz00 (Toshiba AC100) can be booted using device tree with equal
functionality as when booted using a board file. Remove as much of the
board file as is possible, since it's no longer needed.

One special-case is still left in board-dt-tegra20.c, since there is no
way to create a WiFi rfkill device from device tree yet. This logic is
now enabled unconditionally rather than via CONFIG_MACH_PAZ00. The extra
cases where it's enabled (.configs which did not enable Paz00 support)
shouldn't impact much since the amount of code is tiny.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Marc Dietrich <marvin24@gmx.de>

1 files changed, 0 insertions, 192 deletions

diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 4b64af5cab27..59305516fadb 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,72 +17,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio_keys.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <linux/rfkill-gpio.h>
 
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
 #include "board-paz00.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		/* serial port on JP1 */
-		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
-		.mapbase	= TEGRA_UARTA_BASE,
-		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		/* serial port on mini-pcie */
-		.membase	= IO_ADDRESS(TEGRA_UARTC_BASE),
-		.mapbase	= TEGRA_UARTC_BASE,
-		.irq		= INT_UARTC,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
 
 static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
 	.name		= "wifi_rfkill",
@@ -99,137 +37,7 @@ static struct platform_device wifi_rfkill_device = {
 	},
 };
 
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "wifi-led",
-		.default_trigger	= "rfkill0",
-		.gpio			= TEGRA_WIFI_LED,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-        },
-};
-
-static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= TEGRA_GPIO_POWERKEY,
-		.active_low	= 1,
-		.desc		= "Power",
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data paz00_gpio_keys = {
-	.buttons	= paz00_gpio_keys_buttons,
-	.nbuttons	= ARRAY_SIZE(paz00_gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &paz00_gpio_keys,
-	},
-};
-
-static struct platform_device *paz00_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device4,
-	&tegra_sdhci_device1,
-	&leds_gpio,
-	&gpio_keys_device,
-};
-
-static void paz00_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device4);
-}
-
-static void paz00_usb_init(void)
-{
-	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
-
-	platform_device_register(&tegra_ehci2_device);
-	platform_device_register(&tegra_ehci3_device);
-}
-
-static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-}
-
-static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	216000000,	true },
-	{ "uartc",	"pll_p",	216000000,	true },
-
-	{ "usbd",	"clk_m",	12000000,	false },
-	{ "usb2",	"clk_m",	12000000,	false },
-	{ "usb3",	"clk_m",	12000000,	false },
-
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= TEGRA_GPIO_SD1_CD,
-	.wp_gpio	= TEGRA_GPIO_SD1_WP,
-	.power_gpio	= TEGRA_GPIO_SD1_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-	.is_8bit	= 1,
-};
-
 void __init tegra_paz00_wifikill_init(void)
 {
 	platform_device_register(&wifi_rfkill_device);
 }
-
-static void __init tegra_paz00_init(void)
-{
-	tegra_clk_init_from_table(paz00_clk_init_table);
-
-	paz00_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
-	tegra_paz00_wifikill_init();
-
-	paz00_i2c_init();
-	paz00_usb_init();
-}
-
-MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_paz00_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_paz00_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END