ARM: s3c: move into a common directory

s3c24xx and s3c64xx have a lot in common, but are split across three
separate directories, which makes the interaction of the header files
more complicated than necessary.

Move all three directories into a new mach-s3c, with a minimal
set of changes to each file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX
       headers to new files, remove plat-samsung from MAINTAINERS]
Co-developed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org

1 files changed, 0 insertions, 218 deletions

diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
deleted file mode 100644
index 0eb45f13f0c4..000000000000
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/rx3715.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "h1940.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
-	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-			S3C2410_LCDCON5_FRM565 |
-			S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 260000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 36,
-	.right_margin	= 36,
-	.hsync_len	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 7,
-	.vsync_len	= 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
-	.displays =	&rx3715_lcdcfg,
-	.num_displays =	1,
-	.default_display = 0,
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init rx3715_init_time(void)
-{
-	s3c2440_init_clocks(16934000);
-	samsung_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	s3c_nand_set_platdata(&rx3715_nand_info);
-	s3c24xx_fb_set_platdata(&rx3715_fb_info);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.map_io		= rx3715_map_io,
-	.reserve	= rx3715_reserve,
-	.init_irq	= s3c2440_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.init_time	= rx3715_init_time,
-MACHINE_END