Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform support updates from Kevin Hilman:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  Some highlights from this round:

   - sunxi: SMP support for A23 SoC
   - socpga: big-endian support
   - pxa: conversion to common clock framework
   - bcm: SMP support for BCM63138
   - imx: support new I.MX7D SoC
   - zte: basic support for ZX296702 SoC"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits)
  ARM: zx: Add basic defconfig support for ZX296702
  ARM: dts: zx: add an initial zx296702 dts and doc
  clk: zx: add clock support to zx296702
  dt-bindings: Add #defines for ZTE ZX296702 clocks
  ARM: socfpga: fix build error due to secondary_startup
  MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS
  ARM: ep93xx: simone: support for SPI-based MMC/SD cards
  MAINTAINERS: update Shawn's email to use kernel.org one
  ARM: socfpga: support suspend to ram
  ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10
  ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5
  ARM: EXYNOS: register power domain driver from core_initcall
  ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs
  ARM: SAMSUNG: Constify platform_device_id
  ARM: EXYNOS: Constify irq_domain_ops
  ARM: EXYNOS: add coupled cpuidle support for Exynos3250
  ARM: EXYNOS: add exynos_get_boot_addr() helper
  ARM: EXYNOS: add exynos_set_boot_addr() helper
  ARM: EXYNOS: make exynos_core_restart() less verbose
  ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout
  ...

17 files changed, 32 insertions, 908 deletions

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4087d334ecdf..2ceed407eda9 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,16 +3,15 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y				+= clock.o devices.o generic.o irq.o \
-				   reset.o
+obj-y				+= devices.o generic.o irq.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
deleted file mode 100644
index 9ee2ad6a0a07..000000000000
--- a/arch/arm/mach-pxa/clock-pxa2xx.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa2xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-
-#include "clock.h"
-
-void clk_pxa2xx_cken_enable(struct clk *clk)
-{
-	CKEN |= 1 << clk->cken;
-}
-
-void clk_pxa2xx_cken_disable(struct clk *clk)
-{
-	CKEN &= ~(1 << clk->cken);
-}
-
-const struct clkops clk_pxa2xx_cken_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t saved_cken;
-
-static int pxa2xx_clock_suspend(void)
-{
-	saved_cken = CKEN;
-	return 0;
-}
-
-static void pxa2xx_clock_resume(void)
-{
-	CKEN = saved_cken;
-}
-#else
-#define pxa2xx_clock_suspend	NULL
-#define pxa2xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa2xx_clock_syscore_ops = {
-	.suspend	= pxa2xx_clock_suspend,
-	.resume		= pxa2xx_clock_resume,
-};
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
deleted file mode 100644
index d4e9499832dc..000000000000
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa3xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "clock.h"
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK		60000000
-
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_PCCE	(1 << 11)
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
-	unsigned long acsr, xclkcfg;
-	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
-	/* Read XCLKCFG register turbo bit */
-	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
-	t = xclkcfg & 0x1;
-
-	acsr = ACSR;
-
-	xl  = acsr & 0x1f;
-	xn  = (acsr >> 8) & 0x7;
-	hss = (acsr >> 14) & 0x3;
-
-	XL = xl * BASE_CLK;
-	XN = xn * XL;
-
-	ro = acsr & ACCR_D0CS;
-
-	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
-	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	if (info) {
-		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
-			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
-			(ro) ? "" : "in");
-		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
-			XL / 1000000, (XL % 1000000) / 10000, xl);
-		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
-			XN / 1000000, (XN % 1000000) / 10000, xn,
-			(t) ? "" : "in");
-		pr_info("HSIO bus clock: %d.%02dMHz\n",
-			HSS / 1000000, (HSS % 1000000) / 10000);
-	}
-
-	return CLK / 1000;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
-	unsigned long rate = 312000000;
-	unsigned long ac97_div;
-
-	ac97_div = AC97_DIV;
-
-	/* This may loose precision for some rates but won't for the
-	 * standard 24.576MHz.
-	 */
-	rate /= (ac97_div >> 12) & 0x7fff;
-	rate *= (ac97_div & 0xfff);
-
-	return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
-	unsigned long acsr;
-	unsigned int hss, hsio_clk;
-
-	acsr = ACSR;
-
-	hss = (acsr >> 14) & 0x3;
-	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	return hsio_clk;
-}
-
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
-
-static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
-{
-	unsigned long acsr = ACSR;
-	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
-
-	return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
-			df_clkdiv[(memclkcfg >> 16) & 0x3];
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA |= mask;
-	else if (clk->cken < 64)
-		CKENB |= mask;
-	else
-		CKENC |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA &= ~mask;
-	else if (clk->cken < 64)
-		CKENB &= ~mask;
-	else
-		CKENC &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-};
-
-const struct clkops clk_pxa3xx_hsio_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_hsio_getrate,
-};
-
-const struct clkops clk_pxa3xx_ac97_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_ac97_getrate,
-};
-
-const struct clkops clk_pxa3xx_smemc_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_smemc_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
-	OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
-	OSCC &= ~OSCC_PEN;
-}
-
-const struct clkops clk_pxa3xx_pout_ops = {
-	.enable		= clk_pout_enable,
-	.disable	= clk_pout_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t cken[2];
-static uint32_t accr;
-
-static int pxa3xx_clock_suspend(void)
-{
-	cken[0] = CKENA;
-	cken[1] = CKENB;
-	accr = ACCR;
-	return 0;
-}
-
-static void pxa3xx_clock_resume(void)
-{
-	ACCR = accr;
-	CKENA = cken[0];
-	CKENB = cken[1];
-}
-#else
-#define pxa3xx_clock_suspend	NULL
-#define pxa3xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa3xx_clock_syscore_ops = {
-	.suspend	= pxa3xx_clock_suspend,
-	.resume		= pxa3xx_clock_resume,
-};
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
deleted file mode 100644
index 4d466102a027..000000000000
--- a/arch/arm/mach-pxa/clock.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/clock.c
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	if (clk->delay)
-		udelay(clk->delay);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-void clk_dummy_enable(struct clk *clk)
-{
-}
-
-void clk_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-struct clk clk_dummy = {
-	.ops		= &clk_dummy_ops,
-};
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
deleted file mode 100644
index 1f65d32c8d5e..000000000000
--- a/arch/arm/mach-pxa/clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#include <linux/clkdev.h>
-#include <linux/syscore_ops.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
-	unsigned int		cken;
-	unsigned int		delay;
-	unsigned int		enabled;
-};
-
-void clk_dummy_enable(struct clk *);
-void clk_dummy_disable(struct clk *);
-
-extern const struct clkops clk_dummy_ops;
-extern struct clk clk_dummy;
-
-#define INIT_CLKREG(_clk,_devname,_conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CK(_name, _cken, _ops)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate, _delay)		\
-struct clk clk_##_name = {				\
-		.ops	= _ops, 			\
-		.rate	= _rate,			\
-		.delay	= _delay,			\
-	}
-
-#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa2xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa2xx_cken_ops;
-
-void clk_pxa2xx_cken_enable(struct clk *clk);
-void clk_pxa2xx_cken_disable(struct clk *clk);
-
-extern struct syscore_ops pxa2xx_clock_syscore_ops;
-
-#if defined(CONFIG_PXA3xx)
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa3xx_cken_ops;
-extern const struct clkops clk_pxa3xx_hsio_ops;
-extern const struct clkops clk_pxa3xx_ac97_ops;
-extern const struct clkops clk_pxa3xx_pout_ops;
-extern const struct clkops clk_pxa3xx_smemc_ops;
-
-extern void clk_pxa3xx_cken_enable(struct clk *);
-extern void clk_pxa3xx_cken_disable(struct clk *);
-
-extern struct syscore_ops pxa3xx_clock_syscore_ops;
-
-#endif
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 4427bf26ea47..16dc95f68125 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -13,6 +13,7 @@
 #include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk-provider.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
@@ -40,7 +41,6 @@
 
 #include "devices.h"
 #include "generic.h"
-#include "clock.h"
 
 /* Only e800 has 128MB RAM */
 void __init eseries_fixup(struct tag *tags, char **cmdline)
@@ -126,27 +126,9 @@ struct resource eseries_tmio_resources[] = {
 };
 
 /* Some e-series hardware cannot control the 32K clock */
-static void clk_32k_dummy(struct clk *clk)
-{
-}
-
-static const struct clkops clk_32k_dummy_ops = {
-	.enable         = clk_32k_dummy,
-	.disable        = clk_32k_dummy,
-};
-
-static struct clk tmio_dummy_clk = {
-	.ops	= &clk_32k_dummy_ops,
-	.rate	= 32768,
-};
-
-static struct clk_lookup eseries_clkregs[] = {
-	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
-};
-
 static void __init eseries_register_clks(void)
 {
-	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
 }
 
 #ifdef CONFIG_MACH_E330
@@ -684,7 +666,7 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
+	/* GPIO11_GPIO,  IRQ0 */
 	GPIO6_GPIO,   /* IRQ1 */
 	GPIO27_GPIO,  /* RST0 */
 	GPIO24_GPIO,  /* RST1 */
@@ -779,6 +761,9 @@ static unsigned long e800_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+
+	/* tc6393xb */
+	GPIO11_3_6MHz,
 };
 
 static struct w100_gen_regs e800_lcd_regs = {
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 04b013fbc98f..ec510ecf8370 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -63,6 +63,12 @@ EXPORT_SYMBOL(get_clock_tick_rate);
  */
 void __init pxa_timer_init(void)
 {
+	if (cpu_is_pxa25x())
+		pxa25x_clocks_init();
+	if (cpu_is_pxa27x())
+		pxa27x_clocks_init();
+	if (cpu_is_pxa3xx())
+		pxa3xx_clocks_init();
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
 			    get_clock_tick_rate());
 }
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 7a9fa1aa4e41..0b1dbb54871a 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -26,17 +26,20 @@ extern void pxa_timer_init(void);
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #define pxa25x_handle_irq icip_handle_irq
+extern int __init pxa25x_clocks_init(void);
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa25x_map_io(void);
 extern void __init pxa26x_init_irq(void);
 
 #define pxa27x_handle_irq ichp_handle_irq
+extern int __init pxa27x_clocks_init(void);
 extern void __init pxa27x_dt_init_irq(void);
 extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
 #define pxa3xx_handle_irq ichp_handle_irq
+extern int __init pxa3xx_clocks_init(void);
 extern void __init pxa3xx_dt_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 89a7c06570d3..98608c5575cb 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -138,7 +138,7 @@ static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
 	return 0;
 }
 
-static struct irq_domain_ops pxa_irq_ops = {
+static const struct irq_domain_ops pxa_irq_ops = {
 	.map    = pxa_irq_map,
 	.xlate  = irq_domain_xlate_onecell,
 };
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7518310c9015..6de32fa0e251 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -58,7 +58,6 @@
 #include <mach/smemc.h>
 
 #include "generic.h"
-#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
@@ -103,6 +102,9 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* SA1111 chip */
+	GPIO11_3_6MHz,
+
 	/* wakeup */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 66e4a2b6316e..23a90c62ec11 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -38,187 +38,11 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
 
 /*
  * Various clock factors driven by the CCCR register.
  */
 
-/* Crystal Frequency to Memory Frequency Multiplier (L) */
-static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
-
-/* Memory Frequency to Run Mode Frequency Multiplier (M) */
-static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
-
-/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
-/* Note: we store the value N * 2 here. */
-static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
-
-/* Crystal clock */
-#define BASE_CLK	3686400
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa25x_get_clk_frequency_khz(int info)
-{
-	unsigned long cccr, turbo;
-	unsigned int l, L, m, M, n2, N;
-
-	cccr = CCCR;
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
-
-	l  =  L_clk_mult[(cccr >> 0) & 0x1f];
-	m  =  M_clk_mult[(cccr >> 5) & 0x03];
-	n2 = N2_clk_mult[(cccr >> 7) & 0x07];
-
-	L = l * BASE_CLK;
-	M = m * L;
-	N = n2 * M / 2;
-
-	if(info)
-	{
-		L += 5000;
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		M += 5000;
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		N += 5000;
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
-			(turbo & 1) ? "" : "in" );
-	}
-
-	return (turbo & 1) ? (N/1000) : (M/1000);
-}
-
-static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
-{
-	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
-}
-
-static const struct clkops clk_pxa25x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static const struct clkops clk_pxa25x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static unsigned long gpio12_config_32k[] = {
-	GPIO12_32KHz,
-};
-
-static unsigned long gpio12_config_gpio[] = {
-	GPIO12_GPIO,
-};
-
-static void clk_gpio12_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_32k, 1);
-}
-
-static void clk_gpio12_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio12_ops = {
-	.enable         = clk_gpio12_enable,
-	.disable        = clk_gpio12_disable,
-};
-
-static unsigned long gpio11_config_3m6[] = {
-	GPIO11_3_6MHz,
-};
-
-static unsigned long gpio11_config_gpio[] = {
-	GPIO11_GPIO,
-};
-
-static void clk_gpio11_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_3m6, 1);
-}
-
-static void clk_gpio11_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio11_ops = {
-	.enable         = clk_gpio11_enable,
-	.disable        = clk_gpio11_disable,
-};
-
-/*
- * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
- * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
- * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
- */
-
-/*
- * PXA 2xx clock declarations.
- */
-static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
-static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
-
-static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
-static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa25x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
-	INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
-	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-#ifdef CONFIG_CPU_PXA26x
-	INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL),
-#else
-	INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL),
-#endif
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
-	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -374,8 +198,6 @@ static int __init pxa25x_init(void)
 
 		reset_status = RCSR;
 
-		clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
-
 		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
 			return ret;
 
@@ -383,7 +205,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
@@ -392,10 +213,6 @@ static int __init pxa25x_init(void)
 			return ret;
 	}
 
-	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255())
-		clkdev_add(&pxa25x_hwuart_clkreg);
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index af423a48c2e3..b5abdeb5bb2d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -37,7 +37,8 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 
 void pxa27x_clear_otgph(void)
 {
@@ -73,174 +74,6 @@ void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio)
 }
 EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
 
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa27x_get_clk_frequency_khz(int info)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M, n2, N, S;
-       	int cccr_a, t, ht, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	t  = clkcfg & (1 << 0);
-	ht = clkcfg & (1 << 2);
-	b  = clkcfg & (1 << 3);
-
-	l  = ccsr & 0x1f;
-	n2 = (ccsr>>7) & 0xf;
-	m  = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L  = l * BASE_CLK;
-	N  = (L * n2) / 2;
-	M  = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-	S  = (b) ? L : (L/2);
-
-	if (info) {
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
-			(t) ? "" : "in" );
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
-			S / 1000000, (S % 1000000) / 10000 );
-	}
-
-	return (t) ? (N/1000) : (L/1000);
-}
-
-/*
- * Return the current mem clock frequency as reflected by CCCR[A], B, and L
- */
-static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M;
-       	int cccr_a, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	b = clkcfg & (1 << 3);
-
-	l = ccsr & 0x1f;
-	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-
-	return M;
-}
-
-static const struct clkops clk_pxa27x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa27x_mem_getrate,
-};
-
-/*
- * Return the current LCD clock frequency in units of 10kHz as
- */
-static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
-{
-	unsigned long ccsr;
-	unsigned int l, L, k, K;
-
-	ccsr = CCSR;
-
-	l = ccsr & 0x1f;
-	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	K = L / k;
-
-	return (K / 10000);
-}
-
-static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
-{
-	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
-}
-
-static const struct clkops clk_pxa27x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa27x_lcd_getrate,
-};
-
-static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
-
-static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
-static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa27x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
-	INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
-	INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
-	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
-	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -466,8 +299,6 @@ static int __init pxa27x_init(void)
 
 		reset_status = RCSR;
 
-		clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
-
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
@@ -475,10 +306,13 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
-		pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+		if (!of_have_populated_dt()) {
+			pxa_register_device(&pxa27x_device_gpio,
+					    &pxa27x_gpio_info);
+			ret = platform_add_devices(devices,
+						   ARRAY_SIZE(devices));
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 17cbc0c7bdb8..28c5b5686638 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -22,7 +22,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
 
 static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
@@ -84,32 +83,15 @@ static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
-
-static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
-
-static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
-};
-
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa300_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
 	}
 
-	if (cpu_is_pxa310()) {
+	if (cpu_is_pxa310())
 		mfp_init_addr(pxa310_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
-	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 6dc99d4f2dc6..2f55bb4b9087 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -22,7 +22,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
 
 static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
@@ -78,20 +77,11 @@ static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
-
-static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
 static int __init pxa320_init(void)
 {
 	if (cpu_is_pxa320()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa320_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index edcbd9c0bcb2..bd4cbef15ccf 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -37,67 +37,11 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
 
 #define PECR_IE(n)	((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-
-static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
-static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
-
-static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
-static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
-static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-
-static struct clk_lookup pxa3xx_clkregs[] = {
-	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
-	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
-	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa3xx-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa3xx-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa3xx-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa3xx-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL),
-	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
 #ifdef CONFIG_PM
 
 #define ISRAM_START	0x5c000000
@@ -476,8 +420,6 @@ static int __init pxa3xx_init(void)
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 
-		clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
-
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
@@ -485,7 +427,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		if (of_have_populated_dt())
 			return 0;
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6dc4f025e674..88f70c37ad0d 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -56,7 +56,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "clock.h"
 
 /* common GPIO	definitions */
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 92e56d8a24d8..e6e27c0468e4 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -59,7 +59,6 @@
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
-#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {