Merge commit 'v2.6.35' into kbuild/kbuild

Conflicts:
	arch/powerpc/Makefile

10 files changed, 184 insertions, 242 deletions

diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 898c0e88acbc..9d1975fa4d9f 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -22,8 +22,9 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include <asm/clkdev.h>
 
+#include <mach/hardware.h>
 #include <mach/clock.h>
 #include "clock.h"
 
@@ -56,18 +57,19 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-static inline void clk_reg_disable(struct clk *clk)
+static void clk_reg_disable(struct clk *clk)
 {
 	if (clk->enable_reg)
 		__raw_writel(__raw_readl(clk->enable_reg) &
 			     ~(1 << clk->enable_shift), clk->enable_reg);
 }
 
-static inline void clk_reg_enable(struct clk *clk)
+static int clk_reg_enable(struct clk *clk)
 {
 	if (clk->enable_reg)
 		__raw_writel(__raw_readl(clk->enable_reg) |
 			     (1 << clk->enable_shift), clk->enable_reg);
+	return 0;
 }
 
 static inline void clk_reg_disable1(struct clk *clk)
@@ -636,31 +638,34 @@ static struct clk flash_ck = {
 static struct clk i2c0_ck = {
 	.name = "i2c0_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 0,
 	.enable_reg = I2CCLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk i2c1_ck = {
 	.name = "i2c1_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 1,
 	.enable_reg = I2CCLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk i2c2_ck = {
 	.name = "i2c2_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 2,
 	.enable_reg = USB_OTG_CLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk spi0_ck = {
@@ -738,16 +743,16 @@ static struct clk wdt_ck = {
 	.name = "wdt_ck",
 	.parent = &per_ck,
 	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
 	.enable_shift = 0,
 	.enable_reg = TIMCLKCTRL_REG,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 /* These clocks are visible outside this module
  * and can be initialized
  */
-static struct clk *onchip_clks[] = {
+static struct clk *onchip_clks[] __initdata = {
 	&ck_13MHz,
 	&ck_pll1,
 	&ck_pll4,
@@ -777,49 +782,74 @@ static struct clk *onchip_clks[] = {
 	&wdt_ck,
 };
 
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-	    && clk->user_rate)
-		ret = clk->set_rate(clk, clk->user_rate);
-	return ret;
-}
+static struct clk_lookup onchip_clkreg[] = {
+	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
+	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
+	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
+	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
+	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
+	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
+	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
+	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
+	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
+	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
+	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
+	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
+	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
+	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
+	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
+	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
+	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
+	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
+	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
+	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
+	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
+	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
+	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
+	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
+	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
+	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
+	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
+};
 
 static void local_clk_disable(struct clk *clk)
 {
-	if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-		clk->set_rate(clk, 0);
-}
+	if (WARN_ON(clk->usecount == 0))
+		return;
 
-static void local_clk_unuse(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		local_clk_disable(clk);
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+			clk->set_rate(clk, 0);
 		if (clk->parent)
-			local_clk_unuse(clk->parent);
+			local_clk_disable(clk->parent);
 	}
 }
 
-static int local_clk_use(struct clk *clk)
+static int local_clk_enable(struct clk *clk)
 {
 	int ret = 0;
-	if (clk->usecount++ == 0) {
-		if (clk->parent)
-			ret = local_clk_use(clk->parent);
 
-		if (ret != 0) {
-			clk->usecount--;
-			goto out;
+	if (clk->usecount == 0) {
+		if (clk->parent) {
+			ret = local_clk_enable(clk->parent);
+			if (ret != 0)
+				goto out;
 		}
 
-		ret = local_clk_enable(clk);
+		if (clk->enable)
+			ret = clk->enable(clk);
+		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+			    && clk->user_rate)
+			ret = clk->set_rate(clk, clk->user_rate);
 
 		if (ret != 0 && clk->parent) {
-			local_clk_unuse(clk->parent);
-			clk->usecount--;
+			local_clk_disable(clk->parent);
+			goto out;
 		}
+
+		clk->usecount++;
 	}
 out:
 	return ret;
@@ -866,35 +896,6 @@ out:
 
 EXPORT_SYMBOL(clk_set_rate);
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *clk = ERR_PTR(-ENOENT);
-	struct clk **clkp;
-
-	clock_lock();
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		if (strcmp(id, (*clkp)->name) == 0
-		    && try_module_get((*clkp)->owner)) {
-			clk = (*clkp);
-			break;
-		}
-	}
-	clock_unlock();
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	clock_lock();
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-	clock_unlock();
-}
-EXPORT_SYMBOL(clk_put);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long ret;
@@ -907,10 +908,10 @@ EXPORT_SYMBOL(clk_get_rate);
 
 int clk_enable(struct clk *clk)
 {
-	int ret = 0;
+	int ret;
 
 	clock_lock();
-	ret = local_clk_use(clk);
+	ret = local_clk_enable(clk);
 	clock_unlock();
 	return ret;
 }
@@ -920,7 +921,7 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	clock_lock();
-	local_clk_unuse(clk);
+	local_clk_disable(clk);
 	clock_unlock();
 }
 
@@ -967,18 +968,24 @@ static int __init clk_init(void)
 
 	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
 	     clkp++) {
-		if (((*clkp)->flags & NEEDS_INITIALIZATION)
-		    && ((*clkp)->set_rate)) {
-			(*clkp)->user_rate = (*clkp)->rate;
-			local_set_rate((*clkp), (*clkp)->user_rate);
-			if ((*clkp)->set_parent)
-				(*clkp)->set_parent((*clkp), (*clkp)->parent);
+		struct clk *clk = *clkp;
+		if (clk->flags & NEEDS_INITIALIZATION) {
+			if (clk->set_rate) {
+				clk->user_rate = clk->rate;
+				local_set_rate(clk, clk->user_rate);
+				if (clk->set_parent)
+					clk->set_parent(clk, clk->parent);
+			}
+			if (clk->enable && clk->usecount)
+				clk->enable(clk);
+			if (clk->disable && !clk->usecount)
+				clk->disable(clk);
 		}
 		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, (*clkp)->name, (*clkp)->rate);
+			__func__, clk->name, clk->rate);
 	}
 
-	local_clk_use(&ck_pll4);
+	local_clk_enable(&ck_pll4);
 
 	/* if ck_13MHz is not used, disable it. */
 	if (ck_13MHz.usecount == 0)
@@ -987,6 +994,8 @@ static int __init clk_init(void)
 	/* Disable autoclocking */
 	__raw_writeb(0xff, AUTOCLK_CTRL);
 
+	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
index cd58f372cfd0..39720d6c0d01 100644
--- a/arch/arm/mach-pnx4008/clock.h
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -14,8 +14,6 @@
 #define __ARCH_ARM_PNX4008_CLOCK_H__
 
 struct clk {
-	struct list_head node;
-	struct module *owner;
 	const char *name;
 	struct clk *parent;
 	struct clk *propagate_next;
@@ -29,9 +27,11 @@ struct clk {
 	u8 enable_shift1;
 	u32 enable_reg1;
 	u32 parent_switch_reg;
-	 u32(*round_rate) (struct clk *, u32);
+	u32(*round_rate) (struct clk *, u32);
 	int (*set_rate) (struct clk *, u32);
 	int (*set_parent) (struct clk * clk, struct clk * parent);
+	int (*enable)(struct clk *);
+	void (*disable)(struct clk *);
 };
 
 /* Flags */
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index 425f7188505e..7fa4bf2e2125 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -22,6 +22,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index f3fea29c00d3..8103f9644e2d 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -18,120 +18,24 @@
 #include <mach/irqs.h>
 #include <mach/i2c.h>
 
-static int set_clock_run(struct platform_device *pdev)
-{
-	struct clk *clk;
-	char name[10];
-	int retval = 0;
-
-	snprintf(name, 10, "i2c%d_ck", pdev->id);
-	clk = clk_get(&pdev->dev, name);
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 1);
-		clk_put(clk);
-	} else
-		retval = -ENOENT;
-
-	return retval;
-}
-
-static int set_clock_stop(struct platform_device *pdev)
-{
-	struct clk *clk;
-	char name[10];
-	int retval = 0;
-
-	snprintf(name, 10, "i2c%d_ck", pdev->id);
-	clk = clk_get(&pdev->dev, name);
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 0);
-		clk_put(clk);
-	} else
-		retval = -ENOENT;
-
-	return retval;
-}
-
-static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int retval = 0;
-#ifdef CONFIG_PM
-	retval = set_clock_run(pdev);
-#endif
-	return retval;
-}
-
-static int i2c_pnx_resume(struct platform_device *pdev)
-{
-	int retval = 0;
-#ifdef CONFIG_PM
-	retval = set_clock_run(pdev);
-#endif
-	return retval;
-}
-
-static u32 calculate_input_freq(struct platform_device *pdev)
-{
-	return HCLK_MHZ;
-}
-
-
-static struct i2c_pnx_algo_data pnx_algo_data0 = {
+static struct i2c_pnx_data i2c0_data = {
+	.name = I2C_CHIP_NAME "0",
 	.base = PNX4008_I2C1_BASE,
 	.irq = I2C_1_INT,
 };
 
-static struct i2c_pnx_algo_data pnx_algo_data1 = {
+static struct i2c_pnx_data i2c1_data = {
+	.name = I2C_CHIP_NAME "1",
 	.base = PNX4008_I2C2_BASE,
 	.irq = I2C_2_INT,
 };
 
-static struct i2c_pnx_algo_data pnx_algo_data2 = {
+static struct i2c_pnx_data i2c2_data = {
+	.name = "USB-I2C",
 	.base = (PNX4008_USB_CONFIG_BASE + 0x300),
 	.irq = USB_I2C_INT,
 };
 
-static struct i2c_adapter pnx_adapter0 = {
-	.name = I2C_CHIP_NAME "0",
-	.algo_data = &pnx_algo_data0,
-};
-static struct i2c_adapter pnx_adapter1 = {
-	.name = I2C_CHIP_NAME "1",
-	.algo_data = &pnx_algo_data1,
-};
-
-static struct i2c_adapter pnx_adapter2 = {
-	.name = "USB-I2C",
-	.algo_data = &pnx_algo_data2,
-};
-
-static struct i2c_pnx_data i2c0_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter0,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter1,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter2,
-};
-
 static struct platform_device i2c0_device = {
 	.name = "pnx-i2c",
 	.id = 0,
diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f319f8..6ca8bd30bf46 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		mov	\rx, #0x00090000
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index 5ff0196c0f16..b383c7de7ab4 100644
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -14,60 +14,6 @@
 #ifndef __PNX4008_TIMEX_H
 #define __PNX4008_TIMEX_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-
 #define CLOCK_TICK_RATE		1000000
 
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
 #endif
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index b3d8d53e32ef..ee3c29c57ae3 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -19,8 +19,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
 #include <mach/pm.h>
 #include <mach/clock.h>
 
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index fc0ba183fe12..0c8aad4bb0dc 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -30,6 +30,8 @@
 #include <asm/mach/time.h>
 #include <asm/errno.h>
 
+#include "time.h"
+
 /*! Note: all timers are UPCOUNTING */
 
 /*!
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
new file mode 100644
index 000000000000..75e88c570aa7
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef PNX_TIME_H
+#define PNX_TIME_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif