diff options
| author | Koen Kooi <koen@beagleboard.org> | 2011-01-12 00:23:29 +0000 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2011-01-11 17:01:30 -0800 |
| commit | 1bd9ef198498e3e00c9d78a1566338f7ea2e4bb5 (patch) | |
| tree | aec0f2576a4402fdb31a276363ef899a83b4dce9 /arch/arm/mach-omap2 | |
| parent | 0f7e2aaa03ea3f2393d3446c686036ce51298d3e (diff) | |
| download | linux-1bd9ef198498e3e00c9d78a1566338f7ea2e4bb5.tar.gz | |
omap3: beaglexm: fix power on of DVI
TFP410 DVI chip is used to provide display out. This chip is controlled by 2 lines: LDO which supplies the power is controlled over gpio + 2 and the enable of the chip itself is done over gpio + 1 NOTE: the LDO is necessary for LED, serial blocks as well. gpio + 1 was used to sense USB overcurrent in vanilla beagle. Without this fix, the display would not function as the LDO remains shut down. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 42 |
1 files changed, 39 insertions, 3 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 673deb9189fe..2ed804073f35 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -273,6 +273,8 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int r; + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || @@ -293,9 +295,16 @@ static int beagle_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "EHCI_nOC"); + if (!r) { + r = gpio_direction_input(gpio + 1); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); + } /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active @@ -316,6 +325,33 @@ static int beagle_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as follows: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "nDVI_PWR_EN"); + if (!r) { + r = gpio_direction_output(gpio + 1, 0); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure nDVI_PWR_EN\n", + __func__); + r = gpio_request(gpio + 2, "DVI_LDO_EN"); + if (!r) { + r = gpio_direction_output(gpio + 2, 1); + if (r) + gpio_free(gpio + 2); + } + if (r) + pr_err("%s: unable to configure DVI_LDO_EN\n", + __func__); + } + return 0; } |