ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM

Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

1 files changed, 43 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index bdddf5ca67c4..30517f5af707 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -20,6 +20,7 @@
 #include "powerdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
+#include "clockdomain.h"
 
 /**
  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
@@ -208,3 +209,45 @@ int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+			  struct clockdomain *clkdm2)
+{
+	omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+				   clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+			  struct clockdomain *clkdm2)
+{
+	omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+				     clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+			   struct clockdomain *clkdm2)
+{
+	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+					     PM_WKDEP, (1 << clkdm2->dep_bit));
+}
+
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!cd->clkdm)
+			continue; /* only happens if data is erroneous */
+
+		/* PRM accesses are slow, so minimize them */
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->wkdep_usecount, 0);
+	}
+
+	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+				     PM_WKDEP);
+	return 0;
+}
+