Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus

Conflicts:
	arch/arm/mach-omap2/pm34xx.c

1 files changed, 4 insertions, 123 deletions

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 1883a464aace..b5361a1260fc 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -491,7 +491,7 @@ console_still_active:
 
 	pwrdm_post_transition();
 
-	omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
 int omap3_can_sleep(void)
@@ -683,134 +683,15 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
-	u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_AUTO_UART4_MASK : 0;
 	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
 					OMAP3630_EN_UART4_MASK : 0;
 	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
 					OMAP3630_GRPSEL_UART4_MASK : 0;
 
-	/*
-	 * Enable interface clock autoidle for all modules.
-	 * Note that in the long run this should be done by clockfw
-	 */
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_MODEM_MASK |
-		OMAP3430ES2_AUTO_MMC3_MASK |
-		OMAP3430ES2_AUTO_ICR_MASK |
-		OMAP3430_AUTO_AES2_MASK |
-		OMAP3430_AUTO_SHA12_MASK |
-		OMAP3430_AUTO_DES2_MASK |
-		OMAP3430_AUTO_MMC2_MASK |
-		OMAP3430_AUTO_MMC1_MASK |
-		OMAP3430_AUTO_MSPRO_MASK |
-		OMAP3430_AUTO_HDQ_MASK |
-		OMAP3430_AUTO_MCSPI4_MASK |
-		OMAP3430_AUTO_MCSPI3_MASK |
-		OMAP3430_AUTO_MCSPI2_MASK |
-		OMAP3430_AUTO_MCSPI1_MASK |
-		OMAP3430_AUTO_I2C3_MASK |
-		OMAP3430_AUTO_I2C2_MASK |
-		OMAP3430_AUTO_I2C1_MASK |
-		OMAP3430_AUTO_UART2_MASK |
-		OMAP3430_AUTO_UART1_MASK |
-		OMAP3430_AUTO_GPT11_MASK |
-		OMAP3430_AUTO_GPT10_MASK |
-		OMAP3430_AUTO_MCBSP5_MASK |
-		OMAP3430_AUTO_MCBSP1_MASK |
-		OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
-		OMAP3430_AUTO_MAILBOXES_MASK |
-		OMAP3430_AUTO_OMAPCTRL_MASK |
-		OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
-		OMAP3430_AUTO_HSOTGUSB_MASK |
-		OMAP3430_AUTO_SAD2D_MASK |
-		OMAP3430_AUTO_SSI_MASK,
-		CORE_MOD, CM_AUTOIDLE1);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_PKA_MASK |
-		OMAP3430_AUTO_AES1_MASK |
-		OMAP3430_AUTO_RNG_MASK |
-		OMAP3430_AUTO_SHA11_MASK |
-		OMAP3430_AUTO_DES1_MASK,
-		CORE_MOD, CM_AUTOIDLE2);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		omap2_cm_write_mod_reg(
-			OMAP3430_AUTO_MAD2D_MASK |
-			OMAP3430ES2_AUTO_USBTLL_MASK,
-			CORE_MOD, CM_AUTOIDLE3);
-	}
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_WDT2_MASK |
-		OMAP3430_AUTO_WDT1_MASK |
-		OMAP3430_AUTO_GPIO1_MASK |
-		OMAP3430_AUTO_32KSYNC_MASK |
-		OMAP3430_AUTO_GPT12_MASK |
-		OMAP3430_AUTO_GPT1_MASK,
-		WKUP_MOD, CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_DSS_MASK,
-		OMAP3430_DSS_MOD,
-		CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_CAM_MASK,
-		OMAP3430_CAM_MOD,
-		CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		omap3630_auto_uart4_mask |
-		OMAP3430_AUTO_GPIO6_MASK |
-		OMAP3430_AUTO_GPIO5_MASK |
-		OMAP3430_AUTO_GPIO4_MASK |
-		OMAP3430_AUTO_GPIO3_MASK |
-		OMAP3430_AUTO_GPIO2_MASK |
-		OMAP3430_AUTO_WDT3_MASK |
-		OMAP3430_AUTO_UART3_MASK |
-		OMAP3430_AUTO_GPT9_MASK |
-		OMAP3430_AUTO_GPT8_MASK |
-		OMAP3430_AUTO_GPT7_MASK |
-		OMAP3430_AUTO_GPT6_MASK |
-		OMAP3430_AUTO_GPT5_MASK |
-		OMAP3430_AUTO_GPT4_MASK |
-		OMAP3430_AUTO_GPT3_MASK |
-		OMAP3430_AUTO_GPT2_MASK |
-		OMAP3430_AUTO_MCBSP4_MASK |
-		OMAP3430_AUTO_MCBSP3_MASK |
-		OMAP3430_AUTO_MCBSP2_MASK,
-		OMAP3430_PER_MOD,
-		CM_AUTOIDLE);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		omap2_cm_write_mod_reg(
-			OMAP3430ES2_AUTO_USBHOST_MASK,
-			OMAP3430ES2_USBHOST_MOD,
-			CM_AUTOIDLE);
-	}
-
+	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	/*
-	 * Set all plls to autoidle. This is needed until autoidle is
-	 * enabled by clockfw
-	 */
-	omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
-			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
-			 MPU_MOD,
-			 CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
-			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
-			 PLL_MOD,
-			 CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
-			 PLL_MOD,
-			 CM_AUTOIDLE2);
-
-	/*
 	 * Enable control of expternal oscillator through
 	 * sys_clkreq. In the long run clock framework should
 	 * take care of this.
@@ -969,10 +850,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
-		omap2_clkdm_allow_idle(clkdm);
+		clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
 		 atomic_read(&clkdm->usecount) == 0)
-		omap2_clkdm_sleep(clkdm);
+		clkdm_sleep(clkdm);
 	return 0;
 }