[ARM] 3430/1: ARM: OMAP: 5/8 Update PM

Patch from Tony Lindgren

Update OMAP PM code from linux-omap tree:

- Move PM code from plat-omap to mach-omap1 and mach-omap2
  by Tony Lindgren
- Add minimal PM support for omap24xx by Tony Lindgren and
  Richard Woodruff
- Misc updates to omap1 PM code by Tuukka Tikkanen et al
- Updates to the SRAM code needed for PM and FB by Imre Deak

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 770 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
new file mode 100644
index 000000000000..ddf6b07dc9c7
--- /dev/null
+++ b/arch/arm/mach-omap1/pm.c
@@ -0,0 +1,770 @@
+/*
+ * linux/arch/arm/mach-omap1/pm.c
+ *
+ * OMAP Power Management Routines
+ *
+ * Original code for the SA11x0:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Modified for the PXA250 by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Modified for the OMAP1510 by David Singleton:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tps65010.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/dsp_common.h>
+#include <asm/arch/dmtimer.h>
+
+static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
+static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
+static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
+static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
+static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
+
+static unsigned short enable_dyn_sleep = 1;
+
+static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf)
+{
+	return sprintf(buf, "%hu\n", enable_dyn_sleep);
+}
+
+static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys,
+					      const char * buf,
+					      size_t n)
+{
+	unsigned short value;
+	if (sscanf(buf, "%hu", &value) != 1 ||
+	    (value != 0 && value != 1)) {
+		printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+		return -EINVAL;
+	}
+	enable_dyn_sleep = value;
+	return n;
+}
+
+static struct subsys_attribute sleep_while_idle_attr = {
+	.attr   = {
+		.name = __stringify(sleep_while_idle),
+		.mode = 0644,
+	},
+	.show   = omap_pm_sleep_while_idle_show,
+	.store  = omap_pm_sleep_while_idle_store,
+};
+
+extern struct subsystem power_subsys;
+static void (*omap_sram_idle)(void) = NULL;
+static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
+
+/*
+ * Let's power down on idle, but only if we are really
+ * idle, because once we start down the path of
+ * going idle we continue to do idle even if we get
+ * a clock tick interrupt . .
+ */
+void omap_pm_idle(void)
+{
+	extern __u32 arm_idlect1_mask;
+	__u32 use_idlect1 = arm_idlect1_mask;
+#ifndef CONFIG_OMAP_MPU_TIMER
+	int do_sleep;
+#endif
+
+	local_irq_disable();
+	local_fiq_disable();
+	if (need_resched()) {
+		local_fiq_enable();
+		local_irq_enable();
+		return;
+	}
+
+	/*
+	 * Since an interrupt may set up a timer, we don't want to
+	 * reprogram the hardware timer with interrupts enabled.
+	 * Re-enable interrupts only after returning from idle.
+	 */
+	timer_dyn_reprogram();
+
+#ifdef CONFIG_OMAP_MPU_TIMER
+#warning Enable 32kHz OS timer in order to allow sleep states in idle
+	use_idlect1 = use_idlect1 & ~(1 << 9);
+#else
+
+	do_sleep = 0;
+	while (enable_dyn_sleep) {
+
+#ifdef CONFIG_CBUS_TAHVO_USB
+		extern int vbus_active;
+		/* Clock requirements? */
+		if (vbus_active)
+			break;
+#endif
+		do_sleep = 1;
+		break;
+	}
+
+#ifdef CONFIG_OMAP_DM_TIMER
+	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
+#endif
+
+	if (omap_dma_running()) {
+		use_idlect1 &= ~(1 << 6);
+		if (omap_lcd_dma_ext_running())
+			use_idlect1 &= ~(1 << 12);
+	}
+
+	/* We should be able to remove the do_sleep variable and multiple
+	 * tests above as soon as drivers, timer and DMA code have been fixed.
+	 * Even the sleep block count should become obsolete. */
+	if ((use_idlect1 != ~0) || !do_sleep) {
+
+		__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
+		if (cpu_is_omap15xx())
+			use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
+		else
+			use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
+		omap_writel(use_idlect1, ARM_IDLECT1);
+		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
+		omap_writel(saved_idlect1, ARM_IDLECT1);
+
+		local_fiq_enable();
+		local_irq_enable();
+		return;
+	}
+	omap_sram_suspend(omap_readl(ARM_IDLECT1),
+			  omap_readl(ARM_IDLECT2));
+#endif
+
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+/*
+ * Configuration of the wakeup event is board specific. For the
+ * moment we put it into this helper function. Later it may move
+ * to board specific files.
+ */
+static void omap_pm_wakeup_setup(void)
+{
+	u32 level1_wake = 0;
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
+
+	/*
+	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
+	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
+	 * drivers must still separately call omap_set_gpio_wakeup() to
+	 * wake up to a GPIO interrupt.
+	 */
+	if (cpu_is_omap730())
+		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	else if (cpu_is_omap15xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
+
+	omap_writel(~level1_wake, OMAP_IH1_MIR);
+
+	if (cpu_is_omap730()) {
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
+				OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+				OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap15xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+		omap_writel(~level2_wake,  OMAP_IH2_MIR);
+	} else if (cpu_is_omap16xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
+		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
+			    OMAP_IH2_1_MIR);
+		omap_writel(~0x0, OMAP_IH2_2_MIR);
+		omap_writel(~0x0, OMAP_IH2_3_MIR);
+	}
+
+	/*  New IRQ agreement, recalculate in cascade order */
+	omap_writel(1, OMAP_IH2_CONTROL);
+	omap_writel(1, OMAP_IH1_CONTROL);
+}
+
+#define EN_DSPCK	13	/* ARM_CKCTL */
+#define EN_APICK	6	/* ARM_IDLECT2 */
+#define DSP_EN		1	/* ARM_RSTCT1 */
+
+void omap_pm_suspend(void)
+{
+	unsigned long arg0 = 0, arg1 = 0;
+
+	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+
+	omap_serial_wake_trigger(1);
+
+	if (machine_is_omap_osk()) {
+		/* Stop LED1 (D9) blink */
+		tps65010_set_led(LED1, OFF);
+	}
+
+	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+
+	/*
+	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
+	 */
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	/*
+	 * Step 2: save registers
+	 *
+	 * The omap is a strange/beautiful device. The caches, memory
+	 * and register state are preserved across power saves.
+	 * We have to save and restore very little register state to
+	 * idle the omap.
+         *
+	 * Save interrupt, MPUI, ARM and UPLD control registers.
+	 */
+
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(OMAP_IH1_MIR);
+		MPUI730_SAVE(OMAP_IH2_0_MIR);
+		MPUI730_SAVE(OMAP_IH2_1_MIR);
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_SAVE(OMAP_IH1_MIR);
+		MPUI1510_SAVE(OMAP_IH2_MIR);
+		MPUI1510_SAVE(MPUI_CTRL);
+		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1510_SAVE(EMIFS_CONFIG);
+		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_SAVE(OMAP_IH1_MIR);
+		MPUI1610_SAVE(OMAP_IH2_0_MIR);
+		MPUI1610_SAVE(OMAP_IH2_1_MIR);
+		MPUI1610_SAVE(OMAP_IH2_2_MIR);
+		MPUI1610_SAVE(OMAP_IH2_3_MIR);
+		MPUI1610_SAVE(MPUI_CTRL);
+		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1610_SAVE(EMIFS_CONFIG);
+		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+	}
+
+	ARM_SAVE(ARM_CKCTL);
+	ARM_SAVE(ARM_IDLECT1);
+	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap15xx()))
+		ARM_SAVE(ARM_IDLECT3);
+	ARM_SAVE(ARM_EWUPCT);
+	ARM_SAVE(ARM_RSTCT1);
+	ARM_SAVE(ARM_RSTCT2);
+	ARM_SAVE(ARM_SYSST);
+	ULPD_SAVE(ULPD_CLOCK_CTRL);
+	ULPD_SAVE(ULPD_STATUS_REQ);
+
+	/* (Step 3 removed - we now allow deep sleep by default) */
+
+	/*
+	 * Step 4: OMAP DSP Shutdown
+	 */
+
+	/* stop DSP */
+	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
+
+	/* shut down dsp_ck */
+	omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+
+	/* temporarily enabling api_ck to access DSP registers */
+	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+	/* save DSP registers */
+	DSP_SAVE(DSP_IDLECT2);
+
+	/* Stop all DSP domain clocks */
+	__raw_writew(0, DSP_IDLECT2);
+
+	/*
+	 * Step 5: Wakeup Event Setup
+	 */
+
+	omap_pm_wakeup_setup();
+
+	/*
+	 * Step 6: ARM and Traffic controller shutdown
+	 */
+
+	/* disable ARM watchdog */
+	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
+	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
+
+	/*
+	 * Step 6b: ARM and Traffic controller shutdown
+	 *
+	 * Step 6 continues here. Prepare jump to power management
+	 * assembly code in internal SRAM.
+	 *
+	 * Since the omap_cpu_suspend routine has been copied to
+	 * SRAM, we'll do an indirect procedure call to it and pass the
+	 * contents of arm_idlect1 and arm_idlect2 so it can restore
+	 * them when it wakes up and it will return.
+	 */
+
+	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
+	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
+
+	/*
+	 * Step 6c: ARM and Traffic controller shutdown
+	 *
+	 * Jump to assembly code. The processor will stay there
+	 * until wake up.
+	 */
+        omap_sram_suspend(arg0, arg1);
+
+	/*
+	 * If we are here, processor is woken up!
+	 */
+
+	/*
+	 * Restore DSP clocks
+	 */
+
+	/* again temporarily enabling api_ck to access DSP registers */
+	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+	/* Restore DSP domain clocks */
+	DSP_RESTORE(DSP_IDLECT2);
+
+	/*
+	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
+	 */
+
+	if (!(cpu_is_omap15xx()))
+		ARM_RESTORE(ARM_IDLECT3);
+	ARM_RESTORE(ARM_CKCTL);
+	ARM_RESTORE(ARM_EWUPCT);
+	ARM_RESTORE(ARM_RSTCT1);
+	ARM_RESTORE(ARM_RSTCT2);
+	ARM_RESTORE(ARM_SYSST);
+	ULPD_RESTORE(ULPD_CLOCK_CTRL);
+	ULPD_RESTORE(ULPD_STATUS_REQ);
+
+	if (cpu_is_omap730()) {
+		MPUI730_RESTORE(EMIFS_CONFIG);
+		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI730_RESTORE(OMAP_IH1_MIR);
+		MPUI730_RESTORE(OMAP_IH2_0_MIR);
+		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_RESTORE(MPUI_CTRL);
+		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
+		MPUI1510_RESTORE(EMIFS_CONFIG);
+		MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI1510_RESTORE(OMAP_IH1_MIR);
+		MPUI1510_RESTORE(OMAP_IH2_MIR);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_RESTORE(MPUI_CTRL);
+		MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
+		MPUI1610_RESTORE(EMIFS_CONFIG);
+		MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
+
+		MPUI1610_RESTORE(OMAP_IH1_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_0_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_1_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_2_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
+	}
+
+	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+
+	/*
+	 * Reenable interrupts
+	 */
+
+	local_irq_enable();
+	local_fiq_enable();
+
+	omap_serial_wake_trigger(0);
+
+	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
+
+	if (machine_is_omap_osk()) {
+		/* Let LED1 (D9) blink again */
+		tps65010_set_led(LED1, BLINK);
+	}
+}
+
+#if defined(DEBUG) && defined(CONFIG_PROC_FS)
+static int g_read_completed;
+
+/*
+ * Read system PM registers for debugging
+ */
+static int omap_pm_read_proc(
+	char *page_buffer,
+	char **my_first_byte,
+	off_t virtual_start,
+	int length,
+	int *eof,
+	void *data)
+{
+	int my_buffer_offset = 0;
+	char * const my_base = page_buffer;
+
+	ARM_SAVE(ARM_CKCTL);
+	ARM_SAVE(ARM_IDLECT1);
+	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap15xx()))
+		ARM_SAVE(ARM_IDLECT3);
+	ARM_SAVE(ARM_EWUPCT);
+	ARM_SAVE(ARM_RSTCT1);
+	ARM_SAVE(ARM_RSTCT2);
+	ARM_SAVE(ARM_SYSST);
+
+	ULPD_SAVE(ULPD_IT_STATUS);
+	ULPD_SAVE(ULPD_CLOCK_CTRL);
+	ULPD_SAVE(ULPD_SOFT_REQ);
+	ULPD_SAVE(ULPD_STATUS_REQ);
+	ULPD_SAVE(ULPD_DPLL_CTRL);
+	ULPD_SAVE(ULPD_POWER_CTRL);
+
+	if (cpu_is_omap730()) {
+		MPUI730_SAVE(MPUI_CTRL);
+		MPUI730_SAVE(MPUI_DSP_STATUS);
+		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI730_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_SAVE(MPUI_CTRL);
+		MPUI1510_SAVE(MPUI_DSP_STATUS);
+		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI1510_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_SAVE(MPUI_CTRL);
+		MPUI1610_SAVE(MPUI_DSP_STATUS);
+		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI1610_SAVE(EMIFS_CONFIG);
+	}
+
+	if (virtual_start == 0) {
+		g_read_completed = 0;
+
+		my_buffer_offset += sprintf(my_base + my_buffer_offset,
+		   "ARM_CKCTL_REG:            0x%-8x     \n"
+		   "ARM_IDLECT1_REG:          0x%-8x     \n"
+		   "ARM_IDLECT2_REG:          0x%-8x     \n"
+		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
+		   "ARM_EWUPCT_REG:           0x%-8x     \n"
+		   "ARM_RSTCT1_REG:           0x%-8x     \n"
+		   "ARM_RSTCT2_REG:           0x%-8x     \n"
+		   "ARM_SYSST_REG:            0x%-8x     \n"
+		   "ULPD_IT_STATUS_REG:       0x%-4x     \n"
+		   "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
+		   "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
+		   "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
+		   "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
+		   "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
+		   ARM_SHOW(ARM_CKCTL),
+		   ARM_SHOW(ARM_IDLECT1),
+		   ARM_SHOW(ARM_IDLECT2),
+		   ARM_SHOW(ARM_IDLECT3),
+		   ARM_SHOW(ARM_EWUPCT),
+		   ARM_SHOW(ARM_RSTCT1),
+		   ARM_SHOW(ARM_RSTCT2),
+		   ARM_SHOW(ARM_SYSST),
+		   ULPD_SHOW(ULPD_IT_STATUS),
+		   ULPD_SHOW(ULPD_CLOCK_CTRL),
+		   ULPD_SHOW(ULPD_SOFT_REQ),
+		   ULPD_SHOW(ULPD_DPLL_CTRL),
+		   ULPD_SHOW(ULPD_STATUS_REQ),
+		   ULPD_SHOW(ULPD_POWER_CTRL));
+
+		if (cpu_is_omap730()) {
+			my_buffer_offset += sprintf(my_base + my_buffer_offset,
+			   "MPUI730_CTRL_REG	     0x%-8x \n"
+			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI730_SHOW(MPUI_CTRL),
+			   MPUI730_SHOW(MPUI_DSP_STATUS),
+			   MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI730_SHOW(EMIFS_CONFIG));
+		} else if (cpu_is_omap15xx()) {
+			my_buffer_offset += sprintf(my_base + my_buffer_offset,
+			   "MPUI1510_CTRL_REG             0x%-8x \n"
+			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI1510_SHOW(MPUI_CTRL),
+			   MPUI1510_SHOW(MPUI_DSP_STATUS),
+			   MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI1510_SHOW(EMIFS_CONFIG));
+		} else if (cpu_is_omap16xx()) {
+			my_buffer_offset += sprintf(my_base + my_buffer_offset,
+			   "MPUI1610_CTRL_REG             0x%-8x \n"
+			   "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI1610_SHOW(MPUI_CTRL),
+			   MPUI1610_SHOW(MPUI_DSP_STATUS),
+			   MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI1610_SHOW(EMIFS_CONFIG));
+		}
+
+		g_read_completed++;
+	} else if (g_read_completed >= 1) {
+		 *eof = 1;
+		 return 0;
+	}
+	g_read_completed++;
+
+	*my_first_byte = page_buffer;
+	return  my_buffer_offset;
+}
+
+static void omap_pm_init_proc(void)
+{
+	struct proc_dir_entry *entry;
+
+	entry = create_proc_read_entry("driver/omap_pm",
+				       S_IWUSR | S_IRUGO, NULL,
+				       omap_pm_read_proc, NULL);
+}
+
+#endif /* DEBUG && CONFIG_PROC_FS */
+
+static void (*saved_idle)(void) = NULL;
+
+/*
+ *	omap_pm_prepare - Do preliminary suspend work.
+ *	@state:		suspend state we're entering.
+ *
+ */
+static int omap_pm_prepare(suspend_state_t state)
+{
+	int error = 0;
+
+	/* We cannot sleep in idle until we have resumed */
+	saved_idle = pm_idle;
+	pm_idle = NULL;
+
+	switch (state)
+	{
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		break;
+
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+
+	default:
+		return -EINVAL;
+	}
+
+	return error;
+}
+
+
+/*
+ *	omap_pm_enter - Actually enter a sleep state.
+ *	@state:		State we're entering.
+ *
+ */
+
+static int omap_pm_enter(suspend_state_t state)
+{
+	switch (state)
+	{
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		omap_pm_suspend();
+		break;
+
+	case PM_SUSPEND_DISK:
+		return -ENOTSUPP;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ *	omap_pm_finish - Finish up suspend sequence.
+ *	@state:		State we're coming out of.
+ *
+ *	This is called after we wake back up (or if entering the sleep state
+ *	failed).
+ */
+
+static int omap_pm_finish(suspend_state_t state)
+{
+	pm_idle = saved_idle;
+	return 0;
+}
+
+
+static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
+				     struct pt_regs *  regs)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_wakeup_irq = {
+	.name		= "peripheral wakeup",
+	.flags		= SA_INTERRUPT,
+	.handler	= omap_wakeup_interrupt
+};
+
+
+
+static struct pm_ops omap_pm_ops ={
+	.pm_disk_mode	= 0,
+	.prepare	= omap_pm_prepare,
+	.enter		= omap_pm_enter,
+	.finish		= omap_pm_finish,
+};
+
+static int __init omap_pm_init(void)
+{
+	printk("Power Management for TI OMAP.\n");
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap730()) {
+		omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
+						omap730_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+						   omap730_cpu_suspend_sz);
+	} else if (cpu_is_omap15xx()) {
+		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
+						omap1510_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+						   omap1510_cpu_suspend_sz);
+	} else if (cpu_is_omap16xx()) {
+		omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
+						omap1610_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
+						   omap1610_cpu_suspend_sz);
+	}
+
+	if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
+		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
+		return -ENODEV;
+	}
+
+	pm_idle = omap_pm_idle;
+
+	if (cpu_is_omap730())
+		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	else if (cpu_is_omap16xx())
+		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
+	/* Program new power ramp-up time
+	 * (0 for most boards since we don't lower voltage when in deep sleep)
+	 */
+	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
+
+	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
+	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+	/* Configure IDLECT3 */
+	if (cpu_is_omap730())
+		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	else if (cpu_is_omap16xx())
+		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
+	pm_set_ops(&omap_pm_ops);
+
+#if defined(DEBUG) && defined(CONFIG_PROC_FS)
+	omap_pm_init_proc();
+#endif
+
+	subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+
+	if (cpu_is_omap16xx()) {
+		/* configure LOW_PWR pin */
+		omap_cfg_reg(T20_1610_LOW_PWR);
+	}
+
+	return 0;
+}
+__initcall(omap_pm_init);