Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...

9 files changed, 2 insertions, 456 deletions

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 6fe1550f43ec..0dd999212944 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -124,6 +124,8 @@ config MACH_MMP2_DT
 	select PINCTRL_SINGLE
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_PJ4
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM && OF
 	help
 	  Include support for Marvell MMP2 based platforms using
 	  the device tree.
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 7b3a7f979eec..e3758f7e1fe7 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -12,12 +12,6 @@ obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= mmp2.o
 obj-$(CONFIG_MMP_SRAM)		+= sram.o
 
-ifeq ($(CONFIG_COMMON_CLK), )
-obj-y				+= clock.o
-obj-$(CONFIG_CPU_PXA168)	+= clock-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= clock-pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= clock-mmp2.o
-endif
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
deleted file mode 100644
index 7536398bf1c1..000000000000
--- a/arch/arm/mach-mmp/clock-mmp2.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_RTC	APBC_REG(0x000)
-#define APBC_TWSI1	APBC_REG(0x004)
-#define APBC_TWSI2	APBC_REG(0x008)
-#define APBC_TWSI3	APBC_REG(0x00c)
-#define APBC_TWSI4	APBC_REG(0x010)
-#define APBC_KPC	APBC_REG(0x018)
-#define APBC_UART1	APBC_REG(0x02c)
-#define APBC_UART2	APBC_REG(0x030)
-#define APBC_UART3	APBC_REG(0x034)
-#define APBC_GPIO	APBC_REG(0x038)
-#define APBC_PWM0	APBC_REG(0x03c)
-#define APBC_PWM1	APBC_REG(0x040)
-#define APBC_PWM2	APBC_REG(0x044)
-#define APBC_PWM3	APBC_REG(0x048)
-#define APBC_SSP0	APBC_REG(0x04c)
-#define APBC_SSP1	APBC_REG(0x050)
-#define APBC_SSP2	APBC_REG(0x054)
-#define APBC_SSP3	APBC_REG(0x058)
-#define APBC_SSP4	APBC_REG(0x05c)
-#define APBC_SSP5	APBC_REG(0x060)
-#define APBC_TWSI5	APBC_REG(0x07c)
-#define APBC_TWSI6	APBC_REG(0x080)
-#define APBC_UART4	APBC_REG(0x088)
-
-#define APMU_USB	APMU_REG(0x05c)
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_SDH0	APMU_REG(0x054)
-#define APMU_SDH1	APMU_REG(0x058)
-#define APMU_SDH2	APMU_REG(0x0e8)
-#define APMU_SDH3	APMU_REG(0x0ec)
-
-static void sdhc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst |= clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst &= ~clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
-	.enable		= sdhc_clk_enable,
-	.disable	= sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, UART1, 1, 26000000);
-static APBC_CLK(uart2, UART2, 1, 26000000);
-static APBC_CLK(uart3, UART3, 1, 26000000);
-static APBC_CLK(uart4, UART4, 1, 26000000);
-static APBC_CLK(twsi1, TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, TWSI6, 0, 26000000);
-static APBC_CLK(gpio, GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
-	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
-	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
-	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL),
-	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
-void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			  phys_addr_t apbc_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
deleted file mode 100644
index 2d4a5d96a1ff..000000000000
--- a/arch/arm/mach-mmp/clock-pxa168.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_UART1	APBC_REG(0x000)
-#define APBC_UART2	APBC_REG(0x004)
-#define APBC_GPIO	APBC_REG(0x008)
-#define APBC_PWM1	APBC_REG(0x00c)
-#define APBC_PWM2	APBC_REG(0x010)
-#define APBC_PWM3	APBC_REG(0x014)
-#define APBC_PWM4	APBC_REG(0x018)
-#define APBC_RTC	APBC_REG(0x028)
-#define APBC_TWSI0	APBC_REG(0x02c)
-#define APBC_KPC	APBC_REG(0x030)
-#define APBC_TWSI1	APBC_REG(0x06c)
-#define APBC_UART3	APBC_REG(0x070)
-#define APBC_SSP1	APBC_REG(0x81c)
-#define APBC_SSP2	APBC_REG(0x820)
-#define APBC_SSP3	APBC_REG(0x84c)
-#define APBC_SSP4	APBC_REG(0x858)
-#define APBC_SSP5	APBC_REG(0x85c)
-
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_LCD	APMU_REG(0x04c)
-#define APMU_ETH	APMU_REG(0x0fc)
-#define APMU_USB	APMU_REG(0x05c)
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, UART1, 1, 14745600);
-static APBC_CLK(uart2, UART2, 1, 14745600);
-static APBC_CLK(uart3, UART3, 1, 14745600);
-static APBC_CLK(twsi0, TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PWM4, 1, 13000000);
-static APBC_CLK(ssp1, SSP1, 4, 0);
-static APBC_CLK(ssp2, SSP2, 4, 0);
-static APBC_CLK(ssp3, SSP3, 4, 0);
-static APBC_CLK(ssp4, SSP4, 4, 0);
-static APBC_CLK(ssp5, SSP5, 4, 0);
-static APBC_CLK(gpio, GPIO, 0, 13000000);
-static APBC_CLK(keypad, KPC, 0, 32000);
-static APBC_CLK(rtc, RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
-	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
-	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
-	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
-	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
-	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
-	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			    phys_addr_t apbc_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
deleted file mode 100644
index 3cd83ff91bb0..000000000000
--- a/arch/arm/mach-mmp/clock-pxa910.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-
-#include "addr-map.h"
-
-#include "common.h"
-#include "clock.h"
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_UART0	APBC_REG(0x000)
-#define APBC_UART1	APBC_REG(0x004)
-#define APBC_GPIO	APBC_REG(0x008)
-#define APBC_PWM1	APBC_REG(0x00c)
-#define APBC_PWM2	APBC_REG(0x010)
-#define APBC_PWM3	APBC_REG(0x014)
-#define APBC_PWM4	APBC_REG(0x018)
-#define APBC_SSP1	APBC_REG(0x01c)
-#define APBC_SSP2	APBC_REG(0x020)
-#define APBC_RTC	APBC_REG(0x028)
-#define APBC_TWSI0	APBC_REG(0x02c)
-#define APBC_KPC	APBC_REG(0x030)
-#define APBC_SSP3	APBC_REG(0x04c)
-#define APBC_TWSI1	APBC_REG(0x06c)
-
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_USB	APMU_REG(0x05c)
-
-static APBC_CLK(uart1, UART0, 1, 14745600);
-static APBC_CLK(uart2, UART1, 1, 14745600);
-static APBC_CLK(twsi0, TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PWM4, 1, 13000000);
-static APBC_CLK(gpio, GPIO, 0, 13000000);
-static APBC_CLK(rtc, RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
-			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
-{
-	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
-}
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
deleted file mode 100644
index 291fe41e3547..000000000000
--- a/arch/arm/mach-mmp/clock.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/clock.c
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "regs-apbc.h"
-#include "clock.h"
-
-static void apbc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void apbc_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apbc_clk_ops = {
-	.enable		= apbc_clk_enable,
-	.disable	= apbc_clk_disable,
-};
-
-static void apmu_clk_enable(struct clk *clk)
-{
-	__raw_writel(clk->enable_val, clk->clk_rst);
-}
-
-static void apmu_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apmu_clk_ops = {
-	.enable		= apmu_clk_enable,
-	.disable	= apmu_clk_disable,
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-	else
-		rate = clk->rate;
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
deleted file mode 100644
index 0256c894fa11..000000000000
--- a/arch/arm/mach-mmp/clock.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <linux/clkdev.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-
-	void __iomem	*clk_rst;	/* clock reset control register */
-	int		fnclksel;	/* functional clock select (APBC) */
-	uint32_t	enable_val;	/* value for clock enable (APMU) */
-	unsigned long	rate;
-	int		enabled;
-};
-
-extern struct clkops apbc_clk_ops;
-extern struct clkops apmu_clk_ops;
-
-#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= &apbc_clk_ops,		\
-}
-
-#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define APMU_CLK(_name, _reg, _eval, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= &apmu_clk_ops,		\
-}
-
-#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define INIT_CLKREG(_clk, _devname, _conname)			\
-	{							\
-		.clk		= _clk,				\
-		.dev_id		= _devname,			\
-		.con_id		= _conname,			\
-	}
-
-extern struct clk clk_pxa168_gpio;
-extern struct clk clk_pxa168_timers;
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b642e900727a..1e9389245d0e 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -19,7 +19,6 @@
 #include <asm/system_misc.h>
 
 #include "addr-map.h"
-#include "clock.h"
 #include "common.h"
 #include <linux/soc/mmp/cputype.h>
 #include "devices.h"
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 049a65f47b42..41b2e8abc9e6 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -34,7 +34,6 @@
 #include "regs-apbc.h"
 #include "irqs.h"
 #include <linux/soc/mmp/cputype.h>
-#include "clock.h"
 
 #define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE