Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These are 18 branches on 9 platforms with board specific changes,
  mostly for defconfig files, but nothing really exciting in here.

  Since the shmobile platform still uses board files for some of the
  newer machines, we get a few changes there as the result of drivers
  getting enabled for those boards.  This causes some conflicts with
  contents getting added from multiple branches in sh-mobile specific
  files.  Renesas is putting a lot of work into migrating to device-tree
  based setup, which will make all those files obsolete in the future
  and avoid both the conflicts and the need to have these files in the
  first place."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  arm: multi_v7_defconfig: Enable initrd/initramfs support
  arm: multi_v7_defconfig: Enable Zynq UART driver
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: ux500: board-mop500: remove unused pin modes
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support
  ARM: tegra: defconfig updates
  ARM: shmobile: bockw defconfig: add MMCIF support
  ARM: shmobile: bockw defconfig: add M25P80 support
  ARM: shmobile: bockw defconfig: add RTC RX8581 support
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ...

7 files changed, 46 insertions, 19 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index e610e137aa36..b634f9650a7b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -227,6 +227,7 @@ config MACH_KM_KIRKWOOD_DT
 config MACH_LSXL_DT
 	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
+	select POWER_RESET_RESTART
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
@@ -288,6 +289,13 @@ config MACH_READYNAS_DT
 	  Say 'Y' here if you want your kernel to support the
 	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
 
+config MACH_SHEEVAPLUG_DT
+	bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell (eSATA) SheevaPlug (Flattened Device Tree).
+
 config MACH_TOPKICK_DT
 	bool "USI Topkick (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -300,6 +308,7 @@ config MACH_TS219_DT
 	select ARCH_KIRKWOOD_DT
 	select ARM_APPENDED_DTB
 	select ARM_ATAG_DTB_COMPAT
+	select POWER_RESET_QNAP
 	help
 	  Say 'Y' here if you want your kernel to support the QNAP
 	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 2fdc3a7ad226..ac4cd75dd499 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -39,5 +39,6 @@ obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
 obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
+obj-$(CONFIG_MACH_SHEEVAPLUG_DT)	+= board-sheevaplug.o
 obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index cee5dc71cb60..6e122ed3282f 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -108,6 +108,9 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("globalscale,guruplug"))
 		guruplug_dt_init();
 
+	if (of_machine_is_compatible("globalscale,sheevaplug"))
+		sheevaplug_dt_init();
+
 	if (of_machine_is_compatible("dlink,dns-kirkwood"))
 		dnskw_init();
 
@@ -165,6 +168,7 @@ static void __init kirkwood_dt_init(void)
 static const char * const kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
 	"globalscale,guruplug",
+	"globalscale,sheevaplug",
 	"dlink,dns-320",
 	"dlink,dns-325",
 	"iom,iconnect",
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 4ec8b7ae784a..348395238df6 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -25,19 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-/*
- * On the LS-XHL/LS-CHLv2, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- *
- */
-static void lsxl_power_off(void)
-{
-	kirkwood_restart('h', NULL);
-}
-
 void __init lsxl_init(void)
 {
 	/*
@@ -46,7 +33,4 @@ void __init lsxl_init(void)
 
 	kirkwood_ge00_init(&lsxl_ge00_data);
 	kirkwood_ge01_init(&lsxl_ge01_data);
-
-	/* register power-off method */
-	pm_power_off = lsxl_power_off;
 }
diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c
new file mode 100644
index 000000000000..fa389373ca74
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-sheevaplug.c
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-kirkwood/board-sheevaplug.c
+ *
+ * Marvell Sheevaplug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init sheevaplug_dt_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_ge00_init(&sheevaplug_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 4695d5f35fc9..860f44ab457d 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,7 +23,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
-#include "tsx1x-common.h"
 
 static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
@@ -38,6 +37,4 @@ void __init qnap_dt_ts219_init(void)
 		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
 
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
-	pm_power_off = qnap_tsx1x_power_off;
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index e2e19b302c28..1c09f3f93fbb 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -67,6 +67,11 @@ void guruplug_dt_init(void);
 #else
 static inline void guruplug_dt_init(void) {};
 #endif
+#ifdef CONFIG_MACH_SHEEVAPLUG_DT
+void sheevaplug_dt_init(void);
+#else
+static inline void sheevaplug_dt_init(void) {};
+#endif
 #ifdef CONFIG_MACH_TS219_DT
 void qnap_dt_ts219_init(void);
 #else