Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
Big update converting pinctrl to use macros and header files. Increases
readability and avoids typos.
Update of AT91 defconfigs and merge of defconfigs for the similar SoCs
sam9260/9g20 and sam9261/9g10.

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
  ARM: at91: udpate defconfigs
  ARM: at91: dt: switch to standard IRQ flag defines
  ARM: at91: dt: switch to pinctrl to pre-processor
  ARM: at91: dt: add pinctrl pre-processor define
  ARM: at91: dt: switch to standard GPIO flag defines.
  ARM: at91: dt: use #include for all device trees

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 85 insertions, 104 deletions

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985515a2..1a2abd8ed407 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -14,15 +14,11 @@ config ARCH_AT91RM9200
 	select SOC_AT91RM9200
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
+	bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
 	select SOC_AT91SAM9260
 
 config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
+	bool "AT91SAM9261 or AT91SAM9G10"
 	select SOC_AT91SAM9261
 
 config ARCH_AT91SAM9263
@@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select SOC_AT91SAM9RL
 
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select SOC_AT91SAM9260
-
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select SOC_AT91SAM9G45
@@ -50,6 +42,14 @@ config ARCH_AT91X40
 
 endchoice
 
+config ARCH_AT91SAM9G20
+	bool
+	select ARCH_AT91SAM9260
+
+config ARCH_AT91SAM9G10
+	bool
+	select ARCH_AT91SAM9261
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -207,76 +207,6 @@ config MACH_FLEXIBITY
 	  Select this if you are using Flexibity Connect board
 	  <http://www.flexibity.com>
 
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-	bool "CALAO USB-A9263"
-	help
-	  Select this if you are using a Calao Systems USB-A9263.
-	  <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
 comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
@@ -341,17 +271,70 @@ config MACH_USB_A9G20
 	  Select this if you are using a Calao Systems USB-A9G20.
 	  <http://www.calao-systems.com>
 
+config MACH_SNAPPER_9260
+	bool "Bluewater Systems Snapper 9260/9G20 module"
+	help
+	  Select this if you are using the Bluewater Systems Snapper 9260 or
+	  Snapper 9G20 modules.
+	  <http://www.bluewatersys.com/>
 endif
 
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 788562dccb43..f4a5f7998bd7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b446645c7727..d3437624ca4e 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-	.shortname	= "AT91SAM9261-EK external DAC",
-#else
-	.shortname	= "AT91SAM9G10-EK external DAC",
-#endif
+	.shortname	= "AT91SAM9261/9G10-EK external DAC",
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 
 #else
@@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 #endif
 
@@ -574,6 +564,10 @@ static void __init ek_board_init(void)
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
+
+	if (cpu_is_at91sam9g10())
+		ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
+
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
@@ -606,11 +600,17 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
-#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-#else
+	/* Maintainer: Atmel */
+	.init_time	= at91sam926x_pit_init,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
-#endif
 	/* Maintainer: Atmel */
 	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,