Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group

1 files changed, 7 insertions, 8 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index e64e5db31497..b4ee9eca9c0c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -570,7 +570,7 @@ F:	Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
 F:	drivers/input/misc/adxl34x.c
 
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <michael.hennerich@analog.com>
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -922,7 +922,7 @@ F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
 ANALOG DEVICES INC AD5686 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -930,7 +930,7 @@ F:	drivers/iio/dac/ad5686*
 F:	drivers/iio/dac/ad5696*
 
 ANALOG DEVICES INC AD5758 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -946,7 +946,7 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
 F:	drivers/iio/adc/ad7091r5.c
 
 ANALOG DEVICES INC AD7124 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -970,7 +970,7 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
 F:	drivers/iio/adc/ad7292.c
 
 ANALOG DEVICES INC AD7606 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 M:	Beniamin Bia <beniamin.bia@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
@@ -979,7 +979,7 @@ F:	Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
 F:	drivers/iio/adc/ad7606.c
 
 ANALOG DEVICES INC AD7768-1 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -1040,7 +1040,7 @@ F:	Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
 F:	drivers/hwmon/adm1177.c
 
 ANALOG DEVICES INC ADP5061 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -1109,7 +1109,6 @@ F:	drivers/iio/amplifiers/hmc425a.c
 ANALOG DEVICES INC IIO DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
-M:	Stefan Popa <stefan.popa@analog.com>
 S:	Supported
 W:	http://wiki.analog.com/
 W:	http://ez.analog.com/community/linux-device-drivers