Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure

2 files changed, 26 insertions, 1 deletions

diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
index a58b63da1a36..f51861bcb07b 100644
--- a/Documentation/acpi/apei/einj.txt
+++ b/Documentation/acpi/apei/einj.txt
@@ -45,11 +45,22 @@ directory apei/einj. The following files are provided.
   injection. Before this, please specify all necessary error
   parameters.
 
+- flags
+  Present for kernel version 3.13 and above. Used to specify which
+  of param{1..4} are valid and should be used by BIOS during injection.
+  Value is a bitmask as specified in ACPI5.0 spec for the
+  SET_ERROR_TYPE_WITH_ADDRESS data structure:
+	Bit 0 - Processor APIC field valid (see param3 below)
+	Bit 1 - Memory address and mask valid (param1 and param2)
+	Bit 2 - PCIe (seg,bus,dev,fn) valid (param4 below)
+  If set to zero, legacy behaviour is used where the type of injection
+  specifies just one bit set, and param1 is multiplexed.
+
 - param1
   This file is used to set the first error parameter value. Effect of
   parameter depends on error_type specified. For example, if error
   type is memory related type, the param1 should be a valid physical
-  memory address.
+  memory address. [Unless "flag" is set - see above]
 
 - param2
   This file is used to set the second error parameter value. Effect of
@@ -58,6 +69,12 @@ directory apei/einj. The following files are provided.
   address mask. Linux requires page or narrower granularity, say,
   0xfffffffffffff000.
 
+- param3
+  Used when the 0x1 bit is set in "flag" to specify the APIC id
+
+- param4
+  Used when the 0x4 bit is set in "flag" to specify target PCIe device
+
 - notrigger
   The EINJ mechanism is a two step process. First inject the error, then
   perform some actions to trigger it. Setting "notrigger" to 1 skips the
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4eb5fff022b4..092cfd139065 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -890,6 +890,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			The xen output can only be used by Xen PV guests.
 
+	edac_report=	[HW,EDAC] Control how to report EDAC event
+			Format: {"on" | "off" | "force"}
+			on: enable EDAC to report H/W event. May be overridden
+			by other higher priority error reporting module.
+			off: disable H/W event reporting through EDAC.
+			force: enforce the use of EDAC to report H/W event.
+			default: on.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd