Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...

15 files changed, 58 insertions, 27 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 2a39aeba1464..d05737aaa84b 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -86,6 +86,8 @@ cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
+cgroups/
+	- cgroups features, including cpusets and memory controller.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -98,8 +100,6 @@ cpu-load.txt
 	- document describing how CPU load statistics are collected.
 cpuidle/
 	- info on CPU_IDLE, CPU idle state management subsystem.
-cpusets.txt
-	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
 cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
 cris/
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
new file mode 100644
index 000000000000..3f58fa3d6d00
--- /dev/null
+++ b/Documentation/cgroups/00-INDEX
@@ -0,0 +1,18 @@
+00-INDEX
+	- this file
+cgroups.txt
+	- Control Groups definition, implementation details, examples and API.
+cpuacct.txt
+	- CPU Accounting Controller; account CPU usage for groups of tasks.
+cpusets.txt
+	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
+devices.txt
+	- Device Whitelist Controller; description, interface and security.
+freezer-subsystem.txt
+	- checkpointing; rationale to not use signals, interface.
+memcg_test.txt
+	- Memory Resource Controller; implementation details.
+memory.txt
+	- Memory Resource Controller; design, accounting, interface, testing.
+resource_counter.txt
+	- Resource Counter API.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 4ea852345a47..6eb1a97e88ce 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -56,7 +56,7 @@ hierarchy, and a set of subsystems; each subsystem has system-specific
 state attached to each cgroup in the hierarchy.  Each hierarchy has
 an instance of the cgroup virtual filesystem associated with it.
 
-At any one time there may be multiple active hierachies of task
+At any one time there may be multiple active hierarchies of task
 cgroups. Each hierarchy is a partition of all tasks in the system.
 
 User level code may create and destroy cgroups by name in an
@@ -124,10 +124,10 @@ following lines:
                                / \
                        Prof (15%) students (5%)
 
-Browsers like firefox/lynx go into the WWW network class, while (k)nfsd go
+Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
 into NFS network class.
 
-At the same time firefox/lynx will share an appropriate CPU/Memory class
+At the same time Firefox/Lynx will share an appropriate CPU/Memory class
 depending on who launched it (prof/student).
 
 With the ability to classify tasks differently for different resources
@@ -325,7 +325,7 @@ and then start a subshell 'sh' in that cgroup:
 Creating, modifying, using the cgroups can be done through the cgroup
 virtual filesystem.
 
-To mount a cgroup hierarchy will all available subsystems, type:
+To mount a cgroup hierarchy with all available subsystems, type:
 # mount -t cgroup xxx /dev/cgroup
 
 The "xxx" is not interpreted by the cgroup code, but will appear in
@@ -539,7 +539,7 @@ always handled well.
 void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp)
 (cgroup_mutex held by caller)
 
-Called at the end of cgroup_clone() to do any paramater
+Called at the end of cgroup_clone() to do any parameter
 initialization which might be required before a task could attach.  For
 example in cpusets, no task may attach before 'cpus' and 'mems' are set
 up.
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 0611e9528c7c..f9ca389dddf4 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -131,7 +131,7 @@ Cpusets extends these two mechanisms as follows:
  - The hierarchy of cpusets can be mounted at /dev/cpuset, for
    browsing and manipulation from user space.
  - A cpuset may be marked exclusive, which ensures that no other
-   cpuset (except direct ancestors and descendents) may contain
+   cpuset (except direct ancestors and descendants) may contain
    any overlapping CPUs or Memory Nodes.
  - You can list all the tasks (by pid) attached to any cpuset.
 
@@ -226,7 +226,7 @@ nodes with memory--using the cpuset_track_online_nodes() hook.
 --------------------------------
 
 If a cpuset is cpu or mem exclusive, no other cpuset, other than
-a direct ancestor or descendent, may share any of the same CPUs or
+a direct ancestor or descendant, may share any of the same CPUs or
 Memory Nodes.
 
 A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
@@ -427,7 +427,7 @@ child cpusets have this flag enabled.
 When doing this, you don't usually want to leave any unpinned tasks in
 the top cpuset that might use non-trivial amounts of CPU, as such tasks
 may be artificially constrained to some subset of CPUs, depending on
-the particulars of this flag setting in descendent cpusets.  Even if
+the particulars of this flag setting in descendant cpusets.  Even if
 such a task could use spare CPU cycles in some other CPUs, the kernel
 scheduler might not consider the possibility of load balancing that
 task to that underused CPU.
@@ -531,9 +531,9 @@ be idle.
 
 Of course it takes some searching cost to find movable tasks and/or
 idle CPUs, the scheduler might not search all CPUs in the domain
-everytime.  In fact, in some architectures, the searching ranges on
+every time.  In fact, in some architectures, the searching ranges on
 events are limited in the same socket or node where the CPU locates,
-while the load balance on tick searchs all.
+while the load balance on tick searches all.
 
 For example, assume CPU Z is relatively far from CPU X.  Even if CPU Z
 is idle while CPU X and the siblings are busy, scheduler can't migrate
@@ -601,7 +601,7 @@ its new cpuset, then the task will continue to use whatever subset
 of MPOL_BIND nodes are still allowed in the new cpuset.  If the task
 was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed
 in the new cpuset, then the task will be essentially treated as if it
-was MPOL_BIND bound to the new cpuset (even though its numa placement,
+was MPOL_BIND bound to the new cpuset (even though its NUMA placement,
 as queried by get_mempolicy(), doesn't change).  If a task is moved
 from one cpuset to another, then the kernel will adjust the tasks
 memory placement, as above, the next time that the kernel attempts
diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt
index 7cc6e6a60672..57ca4c89fe5c 100644
--- a/Documentation/cgroups/devices.txt
+++ b/Documentation/cgroups/devices.txt
@@ -42,7 +42,7 @@ suffice, but we can decide the best way to adequately restrict
 movement as people get some experience with this.  We may just want
 to require CAP_SYS_ADMIN, which at least is a separate bit from
 CAP_MKNOD.  We may want to just refuse moving to a cgroup which
-isn't a descendent of the current one.  Or we may want to use
+isn't a descendant of the current one.  Or we may want to use
 CAP_MAC_ADMIN, since we really are trying to lock down root.
 
 CAP_SYS_ADMIN is needed to modify the whitelist or move another
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index 8a11caf417a0..72db89ed0609 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -356,7 +356,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	(Shell-B)
 	# move all tasks in /cgroup/test to /cgroup
 	# /sbin/swapoff -a
-	# rmdir /test/cgroup
+	# rmdir /cgroup/test
 	# kill malloc task.
 
 	Of course, tmpfs v.s. swapoff test should be tested, too.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index e1501964df1e..a98a7fe7aabb 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -302,7 +302,7 @@ will be charged as a new owner of it.
 	unevictable		- # of pages cannot be reclaimed.(mlocked etc)
 
 	Below is depend on CONFIG_DEBUG_VM.
-	inactive_ratio		- VM inernal parameter. (see mm/page_alloc.c)
+	inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
 	recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
 	recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
 	recent_scanned_anon 	- VM internal parameter. (see mm/vmscan.c)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index e5f3833a6ef8..570f9bd9be2b 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -14,6 +14,11 @@ Options
 When mounting an ext3 filesystem, the following option are accepted:
 (*) == default
 
+ro			Mount filesystem read only. Note that ext3 will replay
+			the journal (and thus write to the partition) even when
+			mounted "read only". Mount options "ro,noload" can be
+			used to prevent writes to the filesystem.
+
 journal=update		Update the ext3 file system's journal to the current
 			format.
 
@@ -27,7 +32,9 @@ journal_dev=devnum	When the external journal device's major/minor numbers
 			identified through its new major/minor numbers encoded
 			in devnum.
 
-noload			Don't load the journal on mounting.
+noload			Don't load the journal on mounting. Note that this forces
+			mount of inconsistent filesystem, which can lead to
+			various problems.
 
 data=journal		All data are committed into the journal prior to being
 			written into the main file system.
@@ -92,9 +99,12 @@ nocheck
 
 debug			Extra debugging information is sent to syslog.
 
-errors=remount-ro(*)	Remount the filesystem read-only on an error.
+errors=remount-ro	Remount the filesystem read-only on an error.
 errors=continue		Keep going on a filesystem error.
 errors=panic		Panic and halt the machine if an error occurs.
+			(These mount options override the errors behavior
+			specified in the superblock, which can be
+			configured using tune2fs.)
 
 data_err=ignore(*)	Just print an error message if an error occurs
 			in a file data buffer in ordered mode.
diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
index 84f7cb3d5bec..ffb5c80bec3e 100644
--- a/Documentation/ia64/kvm.txt
+++ b/Documentation/ia64/kvm.txt
@@ -42,7 +42,7 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
 		hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
 	    you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries.
 
-	(3) Rename the firware you owned to Flash.fd, and copy it to /usr/local/share/qemu
+	(3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu
 
 4. Boot up Linux or Windows guests:
 	4.1 Create or install a image for guest boot. If you have xen experience, it should be easy.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index bdc0c433e88c..421920897a37 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1605,7 +1605,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
 	noswapaccount	[KNL] Disable accounting of swap in memory resource
-			controller. (See Documentation/controllers/memory.txt)
+			controller. (See Documentation/cgroups/memory.txt)
 
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
@@ -1955,7 +1955,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cpusets.txt.
+			See Documentation/cgroups/cpusets.txt.
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
index 6c238f59b2a9..249db3a15d15 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt
@@ -1,6 +1,6 @@
 * Uploaded QE firmware
 
-      If a new firwmare has been uploaded to the QE (usually by the
+      If a new firmware has been uploaded to the QE (usually by the
       boot loader), then a 'firmware' child node should be added to the QE
       node.  This node provides information on the uploaded firmware that
       device drivers may need.
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 3ef339f491e0..5ba4d3fc625a 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -126,7 +126,7 @@ This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_u
 to control the CPU time reserved for each control group instead.
 
 For more information on working with control groups, you should read
-Documentation/cgroups.txt as well.
+Documentation/cgroups/cgroups.txt as well.
 
 Group settings are checked against the following limits in order to keep the configuration
 schedulable:
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index 6aaaeb38730c..be45dbb9d7f2 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -8,7 +8,8 @@ The current memory policy support was added to Linux 2.6 around May 2004.  This
 document attempts to describe the concepts and APIs of the 2.6 memory policy
 support.
 
-Memory policies should not be confused with cpusets (Documentation/cpusets.txt)
+Memory policies should not be confused with cpusets
+(Documentation/cgroups/cpusets.txt)
 which is an administrative mechanism for restricting the nodes from which
 memory may be allocated by a set of processes. Memory policies are a
 programming interface that a NUMA-aware application can take advantage of.  When
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index d5fdfd34bbaf..6513fe2d90b8 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -37,7 +37,8 @@ locations.
 
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
-move pages when a task is moved to another cpuset (See ../cpusets.txt).
+move pages when a task is moved to another cpuset (See
+Documentation/cgroups/cpusets.txt).
 Cpusets allows the automation of process locality. If a task is moved to
 a new cpuset then also all its pages are moved with it so that the
 performance of the process does not sink dramatically. Also the pages
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets
index 33bb56655991..0f11d9becb0b 100644
--- a/Documentation/x86/x86_64/fake-numa-for-cpusets
+++ b/Documentation/x86/x86_64/fake-numa-for-cpusets
@@ -7,7 +7,8 @@ you can create fake NUMA nodes that represent contiguous chunks of memory and
 assign them to cpusets and their attached tasks.  This is a way of limiting the
 amount of system memory that are available to a certain class of tasks.
 
-For more information on the features of cpusets, see Documentation/cpusets.txt.
+For more information on the features of cpusets, see
+Documentation/cgroups/cpusets.txt.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
 configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
@@ -32,7 +33,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg:
 	On node 3 totalpages: 131072
 
 Now following the instructions for mounting the cpusets filesystem from
-Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
+Documentation/cgroups/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
 address spaces) to individual cpusets:
 
 	[root@xroads /]# mkdir exampleset