Merge tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A quiet release for SPI, not even many driver updates:

   - Add a dummy loopback driver for use in exercising framework
     features during development.

   - Move the test utilities to tools/ and add support for transferring
     data to and from a file instead of stdin and stdout to spidev_test.

   - Support for Mediatek MT2701 and Renesas AG5 deices"

* tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
  spi: loopback: fix typo in MODULE_PARM_DESC
  spi: sun4i: Prevent chip-select from being activated twice before a transfer
  spi: loopback-test: spi_check_rx_ranges can get always done
  spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern
  spi: loopback-test: write rx pattern also when running without tx_buf
  spi: fsl-espi: expose maximum transfer size limit
  spi: expose master transfer size limitation.
  spi: zynq: use to_platform_device()
  spi: cadence: use to_platform_device()
  spi: mediatek: Add spi support for mt2701 IC
  spi: mediatek: merge all identical compat to mtk_common_compat
  spi: mtk: Add bindings for mediatek MT2701 soc platform
  spi: mediatek: Prevent overflows in FIFO transfers
  spi: s3c64xx: Remove unused platform_device_id entries
  spi: use to_spi_device
  spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmode
  spi: imx: defer spi initialization, if DMA engine is
  spi: imx: return error from dma channel request
  spi: imx: enable loopback only for ECSPI controller family
  spi: imx: fix loopback mode setup after controller reset
  ...

8 files changed, 7 insertions, 495 deletions

diff --git a/Documentation/Makefile b/Documentation/Makefile
index bc0548201755..1207d7907650 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,4 +1,4 @@
 subdir-y := accounting auxdisplay blackfin connector \
 	filesystems filesystems ia64 laptops mic misc-devices \
-	networking pcmcia prctl ptp spi timers vDSO video4linux \
+	networking pcmcia prctl ptp timers vDSO video4linux \
 	watchdog
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 705075da2f10..aa005c1d10d9 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -10,6 +10,7 @@ Required properties:
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
+			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index ce363c923f44..e43f4cf4cf35 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -2,9 +2,10 @@ Binding for MTK SPI controller
 
 Required properties:
 - compatible: should be one of the following.
-    - mediatek,mt8173-spi: for mt8173 platforms
-    - mediatek,mt8135-spi: for mt8135 platforms
+    - mediatek,mt2701-spi: for mt2701 platforms
     - mediatek,mt6589-spi: for mt6589 platforms
+    - mediatek,mt8135-spi: for mt8135 platforms
+    - mediatek,mt8173-spi: for mt8173 platforms
 
 - #address-cells: should be 1.
 
@@ -29,10 +30,10 @@ Required properties:
   muxes clock, and "spi-clk" for the clock gate.
 
 Optional properties:
--cs-gpios: see spi-bus.txt, only required for MT8173.
+-cs-gpios: see spi-bus.txt.
 
 - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
-  controller used. This is a array, the element value should be 0~3,
+  controller used. This is an array, the element value should be 0~3,
   only required for MT8173.
     0: specify GPIO69,70,71,72 for spi pins.
     1: specify GPIO102,103,104,105 for spi pins.
diff --git a/Documentation/spi/.gitignore b/Documentation/spi/.gitignore
deleted file mode 100644
index 4280576397e8..000000000000
--- a/Documentation/spi/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-spidev_fdx
-spidev_test
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX
index a128fa835512..4644bf0d9832 100644
--- a/Documentation/spi/00-INDEX
+++ b/Documentation/spi/00-INDEX
@@ -10,13 +10,9 @@ pxa2xx
 	- PXA2xx SPI master controller build by spi_message fifo wq
 spidev
 	- Intro to the userspace API for spi devices
-spidev_fdx.c
-	- spidev example file
 spi-lm70llp
 	- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
 spi-sc18is602
 	- NXP SC18IS602/603 I2C-bus to SPI bridge
 spi-summary
 	- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
-spidev_test.c
-	- SPI testing utility.
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
deleted file mode 100644
index efa255813e9d..000000000000
--- a/Documentation/spi/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# List of programs to build
-hostprogs-y := spidev_test spidev_fdx
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include
diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c
deleted file mode 100644
index 0ea3e51292fc..000000000000
--- a/Documentation/spi/spidev_fdx.c
+++ /dev/null
@@ -1,158 +0,0 @@
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <string.h>
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <linux/types.h>
-#include <linux/spi/spidev.h>
-
-
-static int verbose;
-
-static void do_read(int fd, int len)
-{
-	unsigned char	buf[32], *bp;
-	int		status;
-
-	/* read at least 2 bytes, no more than 32 */
-	if (len < 2)
-		len = 2;
-	else if (len > sizeof(buf))
-		len = sizeof(buf);
-	memset(buf, 0, sizeof buf);
-
-	status = read(fd, buf, len);
-	if (status < 0) {
-		perror("read");
-		return;
-	}
-	if (status != len) {
-		fprintf(stderr, "short read\n");
-		return;
-	}
-
-	printf("read(%2d, %2d): %02x %02x,", len, status,
-		buf[0], buf[1]);
-	status -= 2;
-	bp = buf + 2;
-	while (status-- > 0)
-		printf(" %02x", *bp++);
-	printf("\n");
-}
-
-static void do_msg(int fd, int len)
-{
-	struct spi_ioc_transfer	xfer[2];
-	unsigned char		buf[32], *bp;
-	int			status;
-
-	memset(xfer, 0, sizeof xfer);
-	memset(buf, 0, sizeof buf);
-
-	if (len > sizeof buf)
-		len = sizeof buf;
-
-	buf[0] = 0xaa;
-	xfer[0].tx_buf = (unsigned long)buf;
-	xfer[0].len = 1;
-
-	xfer[1].rx_buf = (unsigned long) buf;
-	xfer[1].len = len;
-
-	status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer);
-	if (status < 0) {
-		perror("SPI_IOC_MESSAGE");
-		return;
-	}
-
-	printf("response(%2d, %2d): ", len, status);
-	for (bp = buf; len; len--)
-		printf(" %02x", *bp++);
-	printf("\n");
-}
-
-static void dumpstat(const char *name, int fd)
-{
-	__u8	lsb, bits;
-	__u32	mode, speed;
-
-	if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) {
-		perror("SPI rd_mode");
-		return;
-	}
-	if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) {
-		perror("SPI rd_lsb_fist");
-		return;
-	}
-	if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) {
-		perror("SPI bits_per_word");
-		return;
-	}
-	if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) {
-		perror("SPI max_speed_hz");
-		return;
-	}
-
-	printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n",
-		name, mode, bits, lsb ? "(lsb first) " : "", speed);
-}
-
-int main(int argc, char **argv)
-{
-	int		c;
-	int		readcount = 0;
-	int		msglen = 0;
-	int		fd;
-	const char	*name;
-
-	while ((c = getopt(argc, argv, "hm:r:v")) != EOF) {
-		switch (c) {
-		case 'm':
-			msglen = atoi(optarg);
-			if (msglen < 0)
-				goto usage;
-			continue;
-		case 'r':
-			readcount = atoi(optarg);
-			if (readcount < 0)
-				goto usage;
-			continue;
-		case 'v':
-			verbose++;
-			continue;
-		case 'h':
-		case '?':
-usage:
-			fprintf(stderr,
-				"usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n",
-				argv[0]);
-			return 1;
-		}
-	}
-
-	if ((optind + 1) != argc)
-		goto usage;
-	name = argv[optind];
-
-	fd = open(name, O_RDWR);
-	if (fd < 0) {
-		perror("open");
-		return 1;
-	}
-
-	dumpstat(name, fd);
-
-	if (msglen)
-		do_msg(fd, msglen);
-
-	if (readcount)
-		do_read(fd, readcount);
-
-	close(fd);
-	return 0;
-}
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
deleted file mode 100644
index 135b3f592b83..000000000000
--- a/Documentation/spi/spidev_test.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * SPI testing utility (using spidev driver)
- *
- * Copyright (c) 2007  MontaVista Software, Inc.
- * Copyright (c) 2007  Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * Cross-compile with cross-gcc -I/path/to/cross-kernel/include
- */
-
-#include <stdint.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <getopt.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/types.h>
-#include <linux/spi/spidev.h>
-
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
-
-static void pabort(const char *s)
-{
-	perror(s);
-	abort();
-}
-
-static const char *device = "/dev/spidev1.1";
-static uint32_t mode;
-static uint8_t bits = 8;
-static uint32_t speed = 500000;
-static uint16_t delay;
-static int verbose;
-
-uint8_t default_tx[] = {
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xF0, 0x0D,
-};
-
-uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
-char *input_tx;
-
-static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix)
-{
-	int i = 0;
-	const unsigned char *address = src;
-	const unsigned char *line = address;
-	unsigned char c;
-
-	printf("%s | ", prefix);
-	while (length-- > 0) {
-		printf("%02X ", *address++);
-		if (!(++i % line_size) || (length == 0 && i % line_size)) {
-			if (length == 0) {
-				while (i++ % line_size)
-					printf("__ ");
-			}
-			printf(" | ");  /* right close */
-			while (line < address) {
-				c = *line++;
-				printf("%c", (c < 33 || c == 255) ? 0x2E : c);
-			}
-			printf("\n");
-			if (length > 0)
-				printf("%s | ", prefix);
-		}
-	}
-}
-
-/*
- *  Unescape - process hexadecimal escape character
- *      converts shell input "\x23" -> 0x23
- */
-static int unescape(char *_dst, char *_src, size_t len)
-{
-	int ret = 0;
-	char *src = _src;
-	char *dst = _dst;
-	unsigned int ch;
-
-	while (*src) {
-		if (*src == '\\' && *(src+1) == 'x') {
-			sscanf(src + 2, "%2x", &ch);
-			src += 4;
-			*dst++ = (unsigned char)ch;
-		} else {
-			*dst++ = *src++;
-		}
-		ret++;
-	}
-	return ret;
-}
-
-static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
-{
-	int ret;
-
-	struct spi_ioc_transfer tr = {
-		.tx_buf = (unsigned long)tx,
-		.rx_buf = (unsigned long)rx,
-		.len = len,
-		.delay_usecs = delay,
-		.speed_hz = speed,
-		.bits_per_word = bits,
-	};
-
-	if (mode & SPI_TX_QUAD)
-		tr.tx_nbits = 4;
-	else if (mode & SPI_TX_DUAL)
-		tr.tx_nbits = 2;
-	if (mode & SPI_RX_QUAD)
-		tr.rx_nbits = 4;
-	else if (mode & SPI_RX_DUAL)
-		tr.rx_nbits = 2;
-	if (!(mode & SPI_LOOP)) {
-		if (mode & (SPI_TX_QUAD | SPI_TX_DUAL))
-			tr.rx_buf = 0;
-		else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL))
-			tr.tx_buf = 0;
-	}
-
-	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret < 1)
-		pabort("can't send spi message");
-
-	if (verbose)
-		hex_dump(tx, len, 32, "TX");
-	hex_dump(rx, len, 32, "RX");
-}
-
-static void print_usage(const char *prog)
-{
-	printf("Usage: %s [-DsbdlHOLC3]\n", prog);
-	puts("  -D --device   device to use (default /dev/spidev1.1)\n"
-	     "  -s --speed    max speed (Hz)\n"
-	     "  -d --delay    delay (usec)\n"
-	     "  -b --bpw      bits per word \n"
-	     "  -l --loop     loopback\n"
-	     "  -H --cpha     clock phase\n"
-	     "  -O --cpol     clock polarity\n"
-	     "  -L --lsb      least significant bit first\n"
-	     "  -C --cs-high  chip select active high\n"
-	     "  -3 --3wire    SI/SO signals shared\n"
-	     "  -v --verbose  Verbose (show tx buffer)\n"
-	     "  -p            Send data (e.g. \"1234\\xde\\xad\")\n"
-	     "  -N --no-cs    no chip select\n"
-	     "  -R --ready    slave pulls low to pause\n"
-	     "  -2 --dual     dual transfer\n"
-	     "  -4 --quad     quad transfer\n");
-	exit(1);
-}
-
-static void parse_opts(int argc, char *argv[])
-{
-	while (1) {
-		static const struct option lopts[] = {
-			{ "device",  1, 0, 'D' },
-			{ "speed",   1, 0, 's' },
-			{ "delay",   1, 0, 'd' },
-			{ "bpw",     1, 0, 'b' },
-			{ "loop",    0, 0, 'l' },
-			{ "cpha",    0, 0, 'H' },
-			{ "cpol",    0, 0, 'O' },
-			{ "lsb",     0, 0, 'L' },
-			{ "cs-high", 0, 0, 'C' },
-			{ "3wire",   0, 0, '3' },
-			{ "no-cs",   0, 0, 'N' },
-			{ "ready",   0, 0, 'R' },
-			{ "dual",    0, 0, '2' },
-			{ "verbose", 0, 0, 'v' },
-			{ "quad",    0, 0, '4' },
-			{ NULL, 0, 0, 0 },
-		};
-		int c;
-
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL);
-
-		if (c == -1)
-			break;
-
-		switch (c) {
-		case 'D':
-			device = optarg;
-			break;
-		case 's':
-			speed = atoi(optarg);
-			break;
-		case 'd':
-			delay = atoi(optarg);
-			break;
-		case 'b':
-			bits = atoi(optarg);
-			break;
-		case 'l':
-			mode |= SPI_LOOP;
-			break;
-		case 'H':
-			mode |= SPI_CPHA;
-			break;
-		case 'O':
-			mode |= SPI_CPOL;
-			break;
-		case 'L':
-			mode |= SPI_LSB_FIRST;
-			break;
-		case 'C':
-			mode |= SPI_CS_HIGH;
-			break;
-		case '3':
-			mode |= SPI_3WIRE;
-			break;
-		case 'N':
-			mode |= SPI_NO_CS;
-			break;
-		case 'v':
-			verbose = 1;
-			break;
-		case 'R':
-			mode |= SPI_READY;
-			break;
-		case 'p':
-			input_tx = optarg;
-			break;
-		case '2':
-			mode |= SPI_TX_DUAL;
-			break;
-		case '4':
-			mode |= SPI_TX_QUAD;
-			break;
-		default:
-			print_usage(argv[0]);
-			break;
-		}
-	}
-	if (mode & SPI_LOOP) {
-		if (mode & SPI_TX_DUAL)
-			mode |= SPI_RX_DUAL;
-		if (mode & SPI_TX_QUAD)
-			mode |= SPI_RX_QUAD;
-	}
-}
-
-int main(int argc, char *argv[])
-{
-	int ret = 0;
-	int fd;
-	uint8_t *tx;
-	uint8_t *rx;
-	int size;
-
-	parse_opts(argc, argv);
-
-	fd = open(device, O_RDWR);
-	if (fd < 0)
-		pabort("can't open device");
-
-	/*
-	 * spi mode
-	 */
-	ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode);
-	if (ret == -1)
-		pabort("can't set spi mode");
-
-	ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode);
-	if (ret == -1)
-		pabort("can't get spi mode");
-
-	/*
-	 * bits per word
-	 */
-	ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits);
-	if (ret == -1)
-		pabort("can't set bits per word");
-
-	ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits);
-	if (ret == -1)
-		pabort("can't get bits per word");
-
-	/*
-	 * max speed hz
-	 */
-	ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed);
-	if (ret == -1)
-		pabort("can't set max speed hz");
-
-	ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed);
-	if (ret == -1)
-		pabort("can't get max speed hz");
-
-	printf("spi mode: 0x%x\n", mode);
-	printf("bits per word: %d\n", bits);
-	printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);
-
-	if (input_tx) {
-		size = strlen(input_tx+1);
-		tx = malloc(size);
-		rx = malloc(size);
-		size = unescape((char *)tx, input_tx, size);
-		transfer(fd, tx, rx, size);
-		free(rx);
-		free(tx);
-	} else {
-		transfer(fd, default_tx, default_rx, sizeof(default_tx));
-	}
-
-	close(fd);
-
-	return ret;
-}