Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here's the powerpc batch for this merge window.  Some of the
  highlights are:

   - A bunch of endian fixes ! We don't have full LE support yet in that
     release but this contains a lot of fixes all over arch/powerpc to
     use the proper accessors, call the firmware with the right endian
     mode, etc...

   - A few updates to our "powernv" platform (non-virtualized, the one
     to run KVM on), among other, support for bridging the P8 LPC bus
     for UARTs, support and some EEH fixes.

   - Some mpc51xx clock API cleanups in preparation for a clock API
     overhaul

   - A pile of cleanups of our old math emulation code, including better
     support for using it to emulate optional FP instructions on
     embedded chips that otherwise have a HW FPU.

   - Some infrastructure in selftest, for powerpc now, but could be
     generalized, initially used by some tests for our perf instruction
     counting code.

   - A pile of fixes for hotplug on pseries (that was seriously
     bitrotting)

   - The usual slew of freescale embedded updates, new boards, 64-bit
     hiberation support, e6500 core PMU support, etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc: Correct FSCR bit definitions
  powerpc/xmon: Fix printing of set of CPUs in xmon
  powerpc/pseries: Move lparcfg.c to platforms/pseries
  powerpc/powernv: Return secondary CPUs to firmware on kexec
  powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32
  powerpc: Cleanup handling of the DSCR bit in the FSCR register
  powerpc/pseries: Child nodes are not detached by dlpar_detach_node
  powerpc/pseries: Add mising of_node_put in delete_dt_node
  powerpc/pseries: Make dlpar_configure_connector parent node aware
  powerpc/pseries: Do all node initialization in dlpar_parse_cc_node
  powerpc/pseries: Fix parsing of initial node path in update_dt_node
  powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header
  powerpc/pseries: Fix over writing of rtas return code in update_dt_node
  powerpc/pseries: Fix creation of loop in device node property list
  powerpc: Skip emulating & leave interrupts off for kernel program checks
  powerpc: Add more exception trampolines for hypervisor exceptions
  powerpc: Fix location and rename exception trampolines
  powerpc: Add more trap names to xmon
  powerpc/pseries: Add a warning in the case of cross-cpu VPA registration
  powerpc: Update the 00-Index in Documentation/powerpc
  ...

3 files changed, 209 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
new file mode 100644
index 000000000000..c0a20cd972e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+   -SEC 6 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+    Node defines the base address of the SEC 6 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 6 block.
+    For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 6 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 6.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+EXAMPLE
+	crypto@a0000 {
+		compatible = "fsl,sec-v6.0";
+		fsl,sec-era = <6>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 6
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <49 2 0 0>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In qoriq-sec6.0.dtsi:
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
+
+In the C293 device tree, we add the include of public property:
+
+	crypto@a0000 {
+		/include/ "qoriq-sec6.0.dtsi"
+	}
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 5693877ab377..82dd5b65cf48 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -1,21 +1,20 @@
 * Freescale MSI interrupt controller
 
 Required properties:
-- compatible : compatible list, contains 2 entries,
-  first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
-  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
-  the parent type.
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
 
 - reg : It may contain one or two regions. The first region should contain
   the address and the length of the shared message interrupt register set.
-  The second region should contain the address of aliased MSIIR register for
-  platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
-  msi interrupt can be used in the 256 msi interrupts. This property is
-  optional, without this, all the 256 MSI interrupts can be used.
-  Each available range must begin and end on a multiple of 32 (i.e.
-  no splitting an individual MSI register or the associated PIC interrupt).
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
 
 - interrupts : each one of the interrupts here is one entry per 32 MSIs,
   and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
   to MPIC.
 
 Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
 - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
   is used for MSI messaging.  The address of MSIIR in PCI address space is
   the MSI message address.
@@ -54,6 +61,28 @@ Example:
 		interrupt-parent = <&mpic>;
 	};
 
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
 The Freescale hypervisor and msi-address-64
 -------------------------------------------
 Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 05026ce1875e..6db73df04278 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -5,13 +5,20 @@ please mail me.
 
 00-INDEX
 	- this file
+bootwrapper.txt
+	- Information on how the powerpc kernel is wrapped for boot on various
+	  different platforms.
 cpu_features.txt
 	- info on how we support a variety of CPUs with minimal compile-time
 	options.
 eeh-pci-error-recovery.txt
 	- info on PCI Bus EEH Error Recovery
+firmware-assisted-dump.txt
+	- Documentation on the firmware assisted dump mechanism "fadump".
 hvcs.txt
 	- IBM "Hypervisor Virtual Console Server" Installation Guide
+kvm_440.txt
+	- Various notes on the implementation of KVM for PowerPC 440.
 mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
 pmu-ebb.txt
@@ -19,3 +26,7 @@ pmu-ebb.txt
 qe_firmware.txt
 	- describes the layout of firmware binaries for the Freescale QUICC
 	  Engine and the code that parses and uploads the microcode therein.
+ptrace.txt
+	- Information on the ptrace interfaces for hardware debug registers.
+transactional_memory.txt
+	- Overview of the Power8 transactional memory support.