Merge tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here is the large USB and PHY driver update for 4.14-rc1.

  Not all that exciting, a few new PHY drivers, the usual mess of gadget
  driver updates and fixes, and of course, xhci updates to try to tame
  that beast.

  A number of usb-serial updates and other small fixes all over the USB
  driver tree are in here as well. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (171 commits)
  usbip: vhci-hcd: make vhci_hc_driver const
  usb: phy: Avoid unchecked dereference warning
  usb: imx21-hcd: make imx21_hc_driver const
  usb: host: make ehci_fsl_overrides const and __initconst
  dt-bindings: mt8173-mtu3: add generic compatible and rename file
  dt-bindings: mt8173-xhci: add generic compatible and rename file
  usb: xhci-mtk: add generic compatible string
  usbip: auto retry for concurrent attach
  USB: serial: option: simplify 3 D-Link device entries
  USB: serial: option: add support for D-Link DWM-157 C1
  usb: core: usbport: fix "BUG: key not in .data" when lockdep is enabled
  usb: chipidea: usb2: check memory allocation failure
  usb: Add device quirk for Logitech HD Pro Webcam C920-C
  usb: misc: lvstest: add entry to place port in compliance mode
  usb: xhci: Support enabling of compliance mode for xhci 1.1
  usb:xhci:Fix regression when ATI chipsets detected
  usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
  usb: gadget: make snd_pcm_hardware const
  usb: common: use of_property_read_bool()
  USB: core: constify vm_operations_struct
  ...

13 files changed, 155 insertions, 18 deletions

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis
index e32879b84b4d..137399095d74 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-rndis
+++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -12,3 +12,6 @@ Description:
 				Ethernet over USB link
 		dev_addr	- MAC address of device's end of this
 				Ethernet over USB link
+		class		- USB interface class, default is 02 (hex)
+		subclass	- USB interface subclass, default is 06 (hex)
+		protocol	- USB interface protocol, default is 00 (hex)
diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
index 5151290cf8e7..ee0046dc4192 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb-lvstest
+++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
@@ -45,3 +45,16 @@ Contact:	Pratyush Anand <pratyush.anand@gmail.com>
 Description:
 		Write to this node to issue "U3 exit" for Link Layer
 		Validation device. It is needed for TD.7.36.
+
+What:		/sys/bus/usb/devices/.../enable_compliance
+Date:		July 2017
+Description:
+		Write to this node to set the port to compliance mode to test
+		with Link Layer Validation device. It is needed for TD.7.34.
+
+What:		/sys/bus/usb/devices/.../warm_reset
+Date:		July 2017
+Description:
+		Write to this node to issue "Warm Reset" for Link Layer Validation
+		device. It may be needed to properly reset an xHCI 1.1 host port if
+		compliance mode needed to be explicitly enabled.
diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
index 9f8b7430673c..505709403d3f 100644
--- a/Documentation/devicetree/bindings/mfd/wm831x.txt
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -31,6 +31,7 @@ Required properties:
     ../interrupt-controller/interrupts.txt
 
 Optional sub-nodes:
+  - phys : Contains a phandle to the USB PHY.
   - regulators : Contains sub-nodes for each of the regulators supplied by
     the device. The regulators are bound using their names listed below:
 
diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index 0acc5a99fb79..faf18084a33a 100644
--- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -1,13 +1,18 @@
-mt65xx USB3.0 PHY binding
+MediaTek T-PHY binding
 --------------------------
 
-This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
+T-phy controller supports physical layer functionality for a number of
+controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
 
 Required properties (controller (parent) node):
  - compatible	: should be one of
-		  "mediatek,mt2701-u3phy"
-		  "mediatek,mt2712-u3phy"
-		  "mediatek,mt8173-u3phy"
+		  "mediatek,generic-tphy-v1"
+		  "mediatek,generic-tphy-v2"
+		  "mediatek,mt2701-u3phy" (deprecated)
+		  "mediatek,mt2712-u3phy" (deprecated)
+		  "mediatek,mt8173-u3phy";
+		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
+		  "mediatek,generic-tphy-v2" on mt2712 instead.
  - clocks	: (deprecated, use port's clocks instead) a list of phandle +
 		  clock-specifier pairs, one for each entry in clock-names
  - clock-names	: (deprecated, use port's one instead) must contain
@@ -35,6 +40,8 @@ Required properties (port (child) node):
 		  cell after port phandle is phy type from:
 			- PHY_TYPE_USB2
 			- PHY_TYPE_USB3
+			- PHY_TYPE_PCIE
+			- PHY_TYPE_SATA
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 84d59b0db8df..a67ef2a3874f 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -6,6 +6,7 @@ Required properties (phy (parent) node):
 	* "rockchip,rk3328-usb2phy"
 	* "rockchip,rk3366-usb2phy"
 	* "rockchip,rk3399-usb2phy"
+	* "rockchip,rv1108-usb2phy"
  - reg : the address offset of grf for usb-phy configuration.
  - #clock-cells : should be 0.
  - clock-output-names : specify the 480m output clock name.
@@ -18,6 +19,10 @@ Optional properties:
 		 usb-phy output 480m and xin24m.
 		 Refer to clk/clock-bindings.txt for generic clock
 		 consumer properties.
+ - rockchip,usbgrf : phandle to the syscon managing the "usb general
+		 register files". When set driver will request its
+		 phandle as one companion-grf for some special SoCs
+		 (e.g RV1108).
 
 Required nodes : a sub-node is required for each port the phy provides.
 		 The sub-node name is used to identify host or otg port,
@@ -28,10 +33,14 @@ Required nodes : a sub-node is required for each port the phy provides.
 Required properties (port (child) node):
  - #phy-cells : must be 0. See ./phy-bindings.txt for details.
  - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which shall be the following entries:
+ - interrupt-names : a list which should be one of the following cases:
+	Regular case:
 	* "otg-id" : for the otg id interrupt.
 	* "otg-bvalid" : for the otg vbus interrupt.
 	* "linestate" : for the host/otg linestate interrupt.
+	Some SoCs use one interrupt with the above muxed together, so for these
+	* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
+		to one.
 
 Optional properties:
  - phy-supply : phandle to a regulator that provides power to VBUS.
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563a65ec..b6a9f2b92bab 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
 Required properties:
  - compatible: compatible list, contains:
+	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
 
@@ -38,6 +39,8 @@ Required properties:
 		 "phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 		 "phy", "common".
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+		 "phy", "common".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -60,6 +63,13 @@ Required properties for child node:
 	   one for each entry in clock-names.
  - clock-names: Must contain following for pcie and usb qmp phys:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the PHY clock that will be the parent for
+		       the above pipe clock.
+
+	For "qcom,ipq8074-qmp-pcie-phy":
+		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
+			(or)
+		  "pcie20_phy1_pipe_clk"
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -96,6 +106,7 @@ Example:
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "pipe0";
+			clock-output-names = "pcie_0_pipe_clk_src";
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "lane0";
 		};
diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
new file mode 100644
index 000000000000..9d2868a437ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
@@ -0,0 +1,23 @@
+Mediatek/Ralink USB PHY
+
+Required properties:
+ - compatible: "ralink,rt3352-usbphy"
+	       "mediatek,mt7620-usbphy"
+	       "mediatek,mt7628-usbphy"
+ - reg: required for "mediatek,mt7628-usbphy", unused otherwise
+ - #phy-cells: should be 0
+ - ralink,sysctl: a phandle to a ralink syscon register region
+ - resets: the two reset controllers for host and device
+ - reset-names: the names of the 2 reset controllers
+
+Example:
+
+usbphy: phy {
+	compatible = "mediatek,mt7628-usbphy";
+	reg = <0x10120000 0x1000>;
+	#phy-cells = <0>;
+
+	ralink,sysctl = <&sysc>;
+	resets = <&rstctrl 22 &rstctrl 25>;
+	reset-names = "host", "device";
+};
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 005bc22938ff..cbc7847dbf6c 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -9,6 +9,7 @@ Required properties:
   * allwinner,sun7i-a20-usb-phy
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
+  * allwinner,sun8i-a83t-usb-phy
   * allwinner,sun8i-h3-usb-phy
   * allwinner,sun8i-v3s-usb-phy
   * allwinner,sun50i-a64-usb-phy
@@ -17,18 +18,22 @@ Required properties:
   * "phy_ctrl"
   * "pmu0" for H3, V3s and A64
   * "pmu1"
-  * "pmu2" for sun4i, sun6i or sun7i
+  * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+  * "pmu3" for sun8i-h3
 - #phy-cells : from the generic phy bindings, must be 1
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names :
   * "usb_phy" for sun4i, sun5i or sun7i
   * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
   * "usb0_phy", "usb1_phy" for sun8i
+  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
+  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
 - resets : a list of phandle + reset specifier pairs
 - reset-names :
   * "usb0_reset"
   * "usb1_reset"
-  * "usb2_reset" for sun4i, sun6i or sun7i
+  * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+  * "usb3_reset" for sun8i-h3
 
 Optional properties:
 - usb0_id_det-gpios : gpio phandle for reading the otg id pin value
@@ -37,6 +42,7 @@ Optional properties:
 - usb0_vbus-supply : regulator phandle for controller usb0 vbus
 - usb1_vbus-supply : regulator phandle for controller usb1 vbus
 - usb2_vbus-supply : regulator phandle for controller usb2 vbus
+- usb3_vbus-supply : regulator phandle for controller usb3 vbus
 
 Example:
 	usbphy: phy@0x01c13400 {
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
new file mode 100644
index 000000000000..63e63af3bf59
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -0,0 +1,29 @@
+Broadcom USB Device Controller (BDC)
+====================================
+
+Required properties:
+
+- compatible: must be one of:
+                "brcm,bdc-v0.16"
+                "brcm,bdc"
+- reg: the base register address and length
+- interrupts: the interrupt line for this controller
+
+Optional properties:
+
+On Broadcom STB platforms, these properties are required:
+
+- phys: phandle to one or two USB PHY blocks
+        NOTE: Some SoC's have a single phy and some have
+        USB 2.0 and USB 3.0 phys
+- clocks: phandle to the functional clock of this block
+
+Example:
+
+        bdc@f0b02000 {
+                compatible = "brcm,bdc-v0.16";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index 60527d335b58..2d1bef16f149 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -12,8 +12,21 @@ Required properties:
    MPU.
  - ranges: allows valid 1:1 translation between child's address space and
    parent's address space.
- - clocks: Clock IDs array as required by the controller.
- - clock-names: names of clocks correseponding to IDs in the clock property.
+
+SoC-specific Required Properties:
+The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
+SoCs only:
+
+- clocks:		Clock ID for USB functional clock.
+- clock-names:		Must be "usb".
+
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the USB device id
+			value. This property is as per the binding,
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 
 Sub-nodes:
 The dwc3 core should be added as subnode to Keystone DWC3 glue.
diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 0acfc8acbea1..5611a2e4ddf0 100644
--- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -11,7 +11,11 @@ into two parts.
 ------------------------------------------------------------------------
 
 Required properties:
- - compatible : should contain "mediatek,mt8173-xhci"
+ - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
+	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
+	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
+	addition, one of:
+	- "mediatek,mt8173-xhci"
  - reg : specifies physical base address and size of the registers
  - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
  - interrupts : interrupt used by the controller
@@ -68,10 +72,14 @@ usb30: usb@11270000 {
 
 In the case, xhci is added as subnode to mtu3. An example and the DT binding
 details of mtu3 can be found in:
-Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
+Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
 
 Required properties:
- - compatible : should contain "mediatek,mt8173-xhci"
+ - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
+	soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
+	"mediatek,mtk-xhci" compatible string, you need SoC specific ones in
+	addition, one of:
+	- "mediatek,mt8173-xhci"
  - reg : specifies physical base address and size of the registers
  - reg-names: should be "mac" for xHCI MAC
  - interrupts : interrupt used by the host controller
diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 1d7c3bc677f7..838ae48eafc1 100644
--- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -1,7 +1,11 @@
 The device node for Mediatek USB3.0 DRD controller
 
 Required properties:
- - compatible : should be "mediatek,mt8173-mtu3"
+ - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3",
+	soc-model is the name of SoC, such as mt8173, mt2712 etc,
+	when using "mediatek,mtu3" compatible string, you need SoC specific
+	ones in addition, one of:
+	- "mediatek,mt8173-mtu3"
  - reg : specifies physical base address and size of the registers
  - reg-names: should be "mac" for device IP and "ippc" for IP port control
  - interrupts : interrupt used by the device IP
@@ -44,7 +48,7 @@ Optional properties:
 Sub-nodes:
 The xhci should be added as subnode to mtu3 as shown in the following example
 if host mode is enabled. The DT binding details of xhci can be found in:
-Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
 
 Example:
 ssusb: usb@11271000 {
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 8d52766f07b9..e28025883b79 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -3,20 +3,30 @@ Renesas Electronics USB3.0 Peripheral driver
 Required properties:
   - compatible: Must contain one of the following:
 	- "renesas,r8a7795-usb3-peri"
+	- "renesas,r8a7796-usb3-peri"
+	- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
+	  device
+
+    When compatible with the generic version, nodes must list the
+    SoC-specific version corresponding to the platform first
+    followed by the generic version.
+
   - reg: Base address and length of the register for the USB3.0 Peripheral
   - interrupts: Interrupt specifier for the USB3.0 Peripheral
   - clocks: clock phandle and specifier pair
 
-Example:
+Example of R-Car H3 ES1.x:
 	usb3_peri0: usb@ee020000 {
-		compatible = "renesas,r8a7795-usb3-peri";
+		compatible = "renesas,r8a7795-usb3-peri",
+			     "renesas,rcar-gen3-usb3-peri";
 		reg = <0 0xee020000 0 0x400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 328>;
 	};
 
 	usb3_peri1: usb@ee060000 {
-		compatible = "renesas,r8a7795-usb3-peri";
+		compatible = "renesas,r8a7795-usb3-peri",
+			     "renesas,rcar-gen3-usb3-peri";
 		reg = <0 0xee060000 0 0x400>;
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 327>;