Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits)
  DOC:  A couple corrections and clarifications in USB doc.
  Generate a slightly more informative error msg for bad HZ
  fix typo "is" -> "if" in Makefile
  ext*: spelling fix prefered -> preferred
  DOCUMENTATION:  Use newer DEFINE_SPINLOCK macro in docs.
  KEYS:  Fix the comment to match the file name in rxrpc-type.h.
  RAID: remove trailing space from printk line
  DMA engine: typo fixes
  Remove unused MAX_NODES_SHIFT
  MAINTAINERS: Clarify access to OCFS2 development mailing list.
  V4L: Storage class should be before const qualifier (sn9c102)
  V4L: Storage class should be before const qualifier
  sonypi: Storage class should be before const qualifier
  intel_menlow: Storage class should be before const qualifier
  DVB: Storage class should be before const qualifier
  arm: Storage class should be before const qualifier
  ALSA: Storage class should be before const qualifier
  acpi: Storage class should be before const qualifier
  firmware_sample_driver.c: fix coding style
  MAINTAINERS: Add ati_remote2 driver
  ...

Fixed up trivial conflicts in firmware_sample_driver.c

7 files changed, 15 insertions, 16 deletions

diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 435413ca40dc..77c42f40be5d 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -854,7 +854,7 @@ The change is shown below, in standard patch format: the
  };
 
 -static DEFINE_MUTEX(cache_lock);
-+static spinlock_t cache_lock = SPIN_LOCK_UNLOCKED;
++static DEFINE_SPINLOCK(cache_lock);
  static LIST_HEAD(cache);
  static unsigned int cache_num = 0;
  #define MAX_CACHE_SIZE 10
@@ -1238,7 +1238,7 @@ Here is the "lock-per-object" implementation:
 -        int popularity;
  };
 
- static spinlock_t cache_lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(cache_lock);
 @@ -77,6 +84,7 @@
          obj->id = id;
          obj->popularity = 0;
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index d4188d4ff535..eeff19ca831b 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -100,8 +100,8 @@
       useful documents, at the USB home page (see Resources). An excellent
       introduction to the Linux USB subsystem can be found at the USB Working
       Devices List (see Resources). It explains how the Linux USB subsystem is
-      structured and introduces the reader to the concept of USB urbs, which
-      are essential to USB drivers.
+      structured and introduces the reader to the concept of USB urbs
+      (USB Request Blocks), which are essential to USB drivers.
   </para>
   <para>
       The first thing a Linux USB driver needs to do is register itself with
@@ -162,8 +162,8 @@ static int __init usb_skel_init(void)
 module_init(usb_skel_init);
   </programlisting>
   <para>
-      When the driver is unloaded from the system, it needs to unregister
-      itself with the USB subsystem. This is done with the usb_unregister
+      When the driver is unloaded from the system, it needs to deregister
+      itself with the USB subsystem. This is done with the usb_deregister
       function:
   </para>
   <programlisting>
@@ -232,7 +232,7 @@ static int skel_probe(struct usb_interface *interface,
      were passed to the USB subsystem will be called from a user program trying
      to talk to the device. The first function called will be open, as the
      program tries to open the device for I/O. We increment our private usage
-     count and save off a pointer to our internal structure in the file
+     count and save a pointer to our internal structure in the file
      structure. This is done so that future calls to file operations will
      enable the driver to determine which device the user is addressing.  All
      of this is done with the following code:
@@ -252,8 +252,8 @@ file->private_data = dev;
      send to the device based on the size of the write urb it has created (this
      size depends on the size of the bulk out end point that the device has).
      Then it copies the data from user space to kernel space, points the urb to
-     the data and submits the urb to the USB subsystem.  This can be shown in
-     he following code:
+     the data and submits the urb to the USB subsystem.  This can be seen in
+     the following code:
   </para>
   <programlisting>
 /* we can only write as much as 1 urb will hold */
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 1fc4e7144dce..9c93a03ea33b 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -183,7 +183,7 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Adrian Bunk; which collects "trivial"
+trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
 patches. Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
@@ -196,7 +196,7 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 93f223b9723f..4dbb8be1c991 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1097,7 +1097,7 @@ lock themselves, if required. Drivers that explicitly used the
 io_request_lock for serialization need to be modified accordingly.
 Usually it's as easy as adding a global lock:
 
-	static spinlock_t my_driver_lock = SPIN_LOCK_UNLOCKED;
+	static DEFINE_SPINLOCK(my_driver_lock);
 
 and passing the address to that lock to blk_init_queue().
 
diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt
index 0223c9d20331..60932b02fcb3 100644
--- a/Documentation/cli-sti-removal.txt
+++ b/Documentation/cli-sti-removal.txt
@@ -43,7 +43,7 @@ would execute while the cli()-ed section is executing.
 
 but from now on a more direct method of locking has to be used:
 
-	spinlock_t driver_lock = SPIN_LOCK_UNLOCKED;
+	DEFINE_SPINLOCK(driver_lock);
 	struct driver_data;
 
 	irq_handler (...)
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index c09a96b99354..354aec047c0e 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -47,7 +47,6 @@
 .mm
 53c700_d.h
 53c8xx_d.h*
-BitKeeper
 COPYING
 CREDITS
 CVS
diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README
index 766d320c8eb6..e35d83052192 100644
--- a/Documentation/early-userspace/README
+++ b/Documentation/early-userspace/README
@@ -89,8 +89,8 @@ the 2.7 era (it missed the boat for 2.5).
 You can obtain somewhat infrequent snapshots of klibc from
 ftp://ftp.kernel.org/pub/linux/libs/klibc/
 
-For active users, you are better off using the klibc BitKeeper
-repositories, at http://klibc.bkbits.net/
+For active users, you are better off using the klibc git
+repository, at http://git.kernel.org/?p=libs/klibc/klibc.git
 
 The standalone klibc distribution currently provides three components,
 in addition to the klibc library: