Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add support for 'artificial' Energy Models in which power
  numbers for different entities may be in different scales, add support
  for some new hardware, fix bugs and clean up code in multiple places.

  Specifics:

   - Update the Energy Model support code to allow the Energy Model to
     be artificial, which means that the power values may not be on a
     uniform scale with other devices providing power information, and
     update the cpufreq_cooling and devfreq_cooling thermal drivers to
     support artificial Energy Models (Lukasz Luba).

   - Make DTPM check the Energy Model type (Lukasz Luba).

   - Fix policy counter decrementation in cpufreq if Energy Model is in
     use (Pierre Gondois).

   - Add CPU-based scaling support to passive devfreq governor (Saravana
     Kannan, Chanwoo Choi).

   - Update the rk3399_dmc devfreq driver (Brian Norris).

   - Export dev_pm_ops instead of suspend() and resume() in the IIO
     chemical scd30 driver (Jonathan Cameron).

   - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
     PM-runtime counterparts (Jonathan Cameron).

   - Move symbol exports in the IIO chemical scd30 driver into the
     IIO_SCD30 namespace (Jonathan Cameron).

   - Avoid device PM-runtime usage count underflows (Rafael Wysocki).

   - Allow dynamic debug to control printing of PM messages (David
     Cohen).

   - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
     Bai).

   - Preserve ACPI-table override during hibernation (Amadeusz
     Sławiński).

   - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).

   - Make Intel RAPL power capping driver support the RaptorLake and
     AlderLake N processors (Zhang Rui, Sumeet Pawnikar).

   - Remove redundant store to value after multiply in the RAPL power
     capping driver (Colin Ian King).

   - Add AlderLake processor support to the intel_idle driver (Zhang
     Rui).

   - Fix regression leading to no genpd governor in the PSCI cpuidle
     driver and fix the riscv-sbi cpuidle driver to allow a genpd
     governor to be used (Ulf Hansson).

   - Fix cpufreq governor clean up code to avoid using kfree() directly
     to free kobject-based items (Kevin Hao).

   - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
     Leroy).

   - Make intel_pstate notify frequency invariance code when no_turbo is
     turned on and off (Chen Yu).

   - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
     Pandruvada).

   - Make cpufreq avoid unnecessary frequency updates due to mismatch
     between hardware and the frequency table (Viresh Kumar).

   - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
     code (Viresh Kumar).

   - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
     calling convention for some driver callbacks consistent (Rafael
     Wysocki).

   - Avoid accessing half-initialized cpufreq policies from the show()
     and store() sysfs functions (Schspa Shi).

   - Rearrange cpufreq_offline() to make the calling convention for some
     driver callbacks consistent (Schspa Shi).

   - Update CPPC handling in cpufreq (Pierre Gondois).

   - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).

   - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
     Hansson).

   - Improve the way genpd deals with its governors (Ulf Hansson).

   - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
     Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"

* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
  PM: domains: Trust domain-idle-states from DT to be correct by genpd
  PM: domains: Measure power-on/off latencies in genpd based on a governor
  PM: domains: Allocate governor data dynamically based on a genpd governor
  PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
  PM: domains: Fix initialization of genpd's next_wakeup
  PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
  PM: domains: Measure suspend/resume latencies in genpd based on governor
  PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
  PM: domains: Allocate gpd_timing_data dynamically based on governor
  PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
  PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
  PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
  PM: domains: Drop redundant code for genpd always-on governor
  PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
  powercap: intel_rapl: remove redundant store to value after multiply
  cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
  cpufreq: CPPC: Enable fast_switch
  ACPI: CPPC: Assume no transition latency if no PCCT
  ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
  ACPI: CPPC: Check _OSC for flexible address space
  ...

1 files changed, 0 insertions, 212 deletions

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
deleted file mode 100644
index 58fc8a6cebc7..000000000000
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Rockchip rk3399 DMC (Dynamic Memory Controller) device
-
-Required properties:
-- compatible:		 Must be "rockchip,rk3399-dmc".
-- devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/event/
-			 rockchip-dfi.txt
-- clocks:		 Phandles for clock specified in "clock-names" property
-- clock-names :		 The name of clock used by the DFI, must be
-			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-			 for details.
-- center-supply:	 DMC supply node.
-- status:		 Marks the node enabled/disabled.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Optional properties:
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Following properties relate to DDR timing:
-
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-				  it selects the DDR3 cl-trp-trcd type. It must be
-				  set according to "Speed Bin" in DDR3 datasheet,
-				  DO NOT use a smaller "Speed Bin" than specified
-				  for the DDR3 being used.
-
-- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
-				  power-down idle period in which memories are
-				  placed into power-down mode if bus is idle
-				  for PD_IDLE DFI clock cycles.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
-				  self-refresh idle period in which memories are
-				  placed into self-refresh mode if bus is idle
-				  for SR_IDLE * 1024 DFI clock cycles (DFI
-				  clocks freq is half of DRAM clock), default
-				  value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
-				  clock gating idle period. Memories are placed
-				  into self-refresh mode and memory controller
-				  clock arg gating started if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clock cycles.
-
-- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
-				  period in which memories are placed into
-				  self-refresh power down mode if bus is idle
-				  for srpd_lite_idle * 1024 DFI clock cycles.
-				  This parameter is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defines the standby idle period in which
-				  memories are placed into self-refresh mode.
-				  The controller, pi, PHY and DRAM clock will
-				  be gated if bus is idle for standby_idle * DFI
-				  clock cycles.
-
-- rockchip,dram_dll_dis_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
-				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
-				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
-				  the odt will also stop working.
-
-- rockchip,phy_dll_dis_freq :	  Defines the PHY dll bypass frequency in
-				  MHz (Mega Hz). When DDR frequency is less than
-				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
-				  Note: PHY DLL and PHY ODT are independent.
-
-- rockchip,ddr3_odt_dis_freq :	  When the DRAM type is DDR3, this parameter defines
-				  the ODT disable frequency in MHz (Mega Hz).
-				  when the DDR frequency is  less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 40.
-
-- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 120.
-
-- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the phy side CA line (incluing command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is 240.
-
-- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
-				  then ODT disable frequency in MHz (Mega Hz).
-				  When DDR frequency is less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 34.
-
-- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 240.
-
-- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side CA line (including command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is 240.
-
-- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
-				  defines the ODT disable frequency in
-				  MHz (Mega Hz). When the DDR frequency is less then
-				  ddr3_odt_dis_freq, the ODT on the DRAM side and
-				  controller side are both disabled.
-
-- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 60.
-
-- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is 40.
-
-- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is 40.
-
-- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side CA line (including command address
-				  line) driver strength. Default value is 40.
-
-- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side clock line and CS line driver
-				  strength. Default value is 80.
-
-- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 80.
-
-- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is 60.
-
-Example:
-	dmc_opp_table: dmc_opp_table {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-	};
-
-	dmc: dmc {
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DDRC>;
-		clock-names = "dmc_clk";
-		operating-points-v2 = <&dmc_opp_table>;
-		center-supply = <&ppvar_centerlogic>;
-		upthreshold = <15>;
-		downdifferential = <10>;
-		rockchip,ddr3_speed_bin = <21>;
-		rockchip,pd_idle = <0x40>;
-		rockchip,sr_idle = <0x2>;
-		rockchip,sr_mc_gate_idle = <0x3>;
-		rockchip,srpd_lite_idle	= <0x4>;
-		rockchip,standby_idle = <0x2000>;
-		rockchip,dram_dll_dis_freq = <300>;
-		rockchip,phy_dll_dis_freq = <125>;
-		rockchip,auto_pd_dis_freq = <666>;
-		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <40>;
-		rockchip,ddr3_odt = <120>;
-		rockchip,phy_ddr3_ca_drv = <40>;
-		rockchip,phy_ddr3_dq_drv = <40>;
-		rockchip,phy_ddr3_odt = <240>;
-		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <34>;
-		rockchip,lpddr3_odt = <240>;
-		rockchip,phy_lpddr3_ca_drv = <40>;
-		rockchip,phy_lpddr3_dq_drv = <40>;
-		rockchip,phy_lpddr3_odt = <240>;
-		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <60>;
-		rockchip,lpddr4_dq_odt = <40>;
-		rockchip,lpddr4_ca_odt = <40>;
-		rockchip,phy_lpddr4_ca_drv = <40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <80>;
-		rockchip,phy_lpddr4_dq_drv = <80>;
-		rockchip,phy_lpddr4_odt = <60>;
-	};