Merge branch 'remotes/lorenzo/pci/dwc'

  - Add Kirin MSI support (Xiaowei Song)

  - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
    armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo)

  - Move link notification settings from DesignWare core to individual
    drivers (Gustavo Pimentel)

  - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

  - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel)

  - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

  - Add endpoint library MSI-X test support (Gustavo Pimentel)

* remotes/lorenzo/pci/dwc:
  PCI: endpoint: Add MSI set maximum restriction
  tools: PCI: Add MSI-X support
  pci_endpoint_test: Add 2 ioctl commands
  pci-epf-test/pci_endpoint_test: Add MSI-X support
  pci-epf-test/pci_endpoint_test: Use irq_type module parameter
  pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
  PCI: dwc: Add legacy interrupt callback handler
  PCI: dwc: Rework MSI callbacks handler
  PCI: dwc: Add MSI-X callbacks handler
  PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures
  PCI: endpoint: Add MSI-X interfaces
  PCI: dwc: Fix EP link notification implementation
  PCI: spear13xx: Drop unnecessary root_bus_nr setting
  PCI: qcom: Drop unnecessary root_bus_nr setting
  PCI: histb: Drop unnecessary root_bus_nr setting
  PCI: designware-plat: Drop unnecessary root_bus_nr setting
  PCI: artpec6: Drop unnecessary root_bus_nr setting
  PCI: armada8k: Drop unnecessary root_bus_nr setting
  PCI: keystone: Drop unnecessary root_bus_nr setting
  PCI: imx6: Drop unnecessary root_bus_nr setting
  PCI: exynos: Drop unnecessary root_bus_nr setting
  PCI: kirin: Add MSI support

4 files changed, 56 insertions, 9 deletions

diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
index 3b68b955fb50..cd76ba47394b 100644
--- a/Documentation/PCI/endpoint/function/binding/pci-test.txt
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -15,3 +15,5 @@ subsys_id	 : don't care
 interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
 msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
 		   to test
+msix_interrupts	 : Should be 1 to 2048 depending on the number of MSI-X
+		   interrupts to test
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt
index 9b1d66829290..e86a96b66a6a 100644
--- a/Documentation/PCI/endpoint/pci-endpoint.txt
+++ b/Documentation/PCI/endpoint/pci-endpoint.txt
@@ -44,7 +44,7 @@ by the PCI controller driver.
 	 * clear_bar: ops to reset the BAR
 	 * alloc_addr_space: ops to allocate in PCI controller address space
 	 * free_addr_space: ops to free the allocated address space
-	 * raise_irq: ops to raise a legacy or MSI interrupt
+	 * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt
 	 * start: ops to start the PCI link
 	 * stop: ops to stop the PCI link
 
@@ -96,7 +96,7 @@ by the PCI endpoint function driver.
 *) pci_epc_raise_irq()
 
    The PCI endpoint function driver should use pci_epc_raise_irq() to raise
-   Legacy Interrupt or MSI Interrupt.
+   Legacy Interrupt, MSI or MSI-X Interrupt.
 
 *) pci_epc_mem_alloc_addr()
 
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
index 0c519c9bf94a..5916f1f592bb 100644
--- a/Documentation/PCI/endpoint/pci-test-function.txt
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -20,6 +20,8 @@ The PCI endpoint test device has the following registers:
 	5) PCI_ENDPOINT_TEST_DST_ADDR
 	6) PCI_ENDPOINT_TEST_SIZE
 	7) PCI_ENDPOINT_TEST_CHECKSUM
+	8) PCI_ENDPOINT_TEST_IRQ_TYPE
+	9) PCI_ENDPOINT_TEST_IRQ_NUMBER
 
 *) PCI_ENDPOINT_TEST_MAGIC
 
@@ -34,10 +36,10 @@ that the endpoint device must perform.
 Bitfield Description:
   Bit 0		: raise legacy IRQ
   Bit 1		: raise MSI IRQ
-  Bit 2 - 7	: MSI interrupt number
-  Bit 8		: read command (read data from RC buffer)
-  Bit 9		: write command (write data to RC buffer)
-  Bit 10	: copy command (copy data from one RC buffer to another
+  Bit 2		: raise MSI-X IRQ
+  Bit 3		: read command (read data from RC buffer)
+  Bit 4		: write command (write data to RC buffer)
+  Bit 5		: copy command (copy data from one RC buffer to another
 		  RC buffer)
 
 *) PCI_ENDPOINT_TEST_STATUS
@@ -64,3 +66,22 @@ COPY/READ command.
 
 This register contains the destination address (RC buffer address) for
 the COPY/WRITE command.
+
+*) PCI_ENDPOINT_TEST_IRQ_TYPE
+
+This register contains the interrupt type (Legacy/MSI) triggered
+for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
+
+Possible types:
+ - Legacy	: 0
+ - MSI		: 1
+ - MSI-X	: 2
+
+*) PCI_ENDPOINT_TEST_IRQ_NUMBER
+
+This register contains the triggered ID interrupt.
+
+Admissible values:
+ - Legacy	: 0
+ - MSI		: [1 .. 32]
+ - MSI-X	: [1 .. 2048]
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
index 75f48c3bb191..e40cf0fb58d7 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.txt
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -45,9 +45,9 @@ The PCI endpoint framework populates the directory with the following
 configurable fields.
 
 	# ls functions/pci_epf_test/func1
-	  baseclass_code	interrupt_pin	revid		subsys_vendor_id
-	  cache_line_size	msi_interrupts	subclass_code	vendorid
-	  deviceid          	progif_code	subsys_id
+	  baseclass_code	interrupt_pin	progif_code	subsys_id
+	  cache_line_size	msi_interrupts	revid		subsys_vendorid
+	  deviceid          	msix_interrupts	subclass_code	vendorid
 
 The PCI endpoint function driver populates these entries with default values
 when the device is bound to the driver. The pci-epf-test driver populates
@@ -67,6 +67,7 @@ device, the following commands can be used.
 	# echo 0x104c > functions/pci_epf_test/func1/vendorid
 	# echo 0xb500 > functions/pci_epf_test/func1/deviceid
 	# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+	# echo 8 > functions/pci_epf_test/func1/msix_interrupts
 
 1.5 Binding pci-epf-test Device to EP Controller
 
@@ -120,7 +121,9 @@ following commands.
 
 	Interrupt tests
 
+	SET IRQ TYPE TO LEGACY:         OKAY
 	LEGACY IRQ:     NOT OKAY
+	SET IRQ TYPE TO MSI:            OKAY
 	MSI1:           OKAY
 	MSI2:           OKAY
 	MSI3:           OKAY
@@ -153,9 +156,30 @@ following commands.
 	MSI30:          NOT OKAY
 	MSI31:          NOT OKAY
 	MSI32:          NOT OKAY
+	SET IRQ TYPE TO MSI-X:          OKAY
+	MSI-X1:         OKAY
+	MSI-X2:         OKAY
+	MSI-X3:         OKAY
+	MSI-X4:         OKAY
+	MSI-X5:         OKAY
+	MSI-X6:         OKAY
+	MSI-X7:         OKAY
+	MSI-X8:         OKAY
+	MSI-X9:         NOT OKAY
+	MSI-X10:        NOT OKAY
+	MSI-X11:        NOT OKAY
+	MSI-X12:        NOT OKAY
+	MSI-X13:        NOT OKAY
+	MSI-X14:        NOT OKAY
+	MSI-X15:        NOT OKAY
+	MSI-X16:        NOT OKAY
+	[...]
+	MSI-X2047:      NOT OKAY
+	MSI-X2048:      NOT OKAY
 
 	Read Tests
 
+	SET IRQ TYPE TO MSI:            OKAY
 	READ (      1 bytes):           OKAY
 	READ (   1024 bytes):           OKAY
 	READ (   1025 bytes):           OKAY