Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging tree update for 4.12-rc1.

  It's a big one, adding about 350k new lines of crap^Wcode, mostly all
  in a big dump of media drivers from Intel. But there's other new
  drivers in here as well, yet-another-wifi driver, new IIO drivers, and
  a new crypto accelerator.

  We also deleted a bunch of stuff, mostly in patch cleanups, but also
  the Android ION code has shrunk a lot, and the Android low memory
  killer driver was finally deleted, much to the celebration of the -mm
  developers.

  All of these have been in linux-next with a few build issues that will
  show up when you merge to your tree"

Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.

* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
  staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
  staging: ks7010: remove line continuations in quoted strings
  staging: vt6656: use tabs instead of spaces
  staging: android: ion: Fix unnecessary initialization of static variable
  staging: media: atomisp: fix range checking on clk_num
  staging: media: atomisp: fix misspelled word in comment
  staging: media: atomisp: kmap() can't fail
  staging: atomisp: remove #ifdef for runtime PM functions
  staging: atomisp: satm include directory is gone
  atomisp: remove some more unused files
  atomisp: remove hmm_load/store/clear indirections
  atomisp: kill off mmgr_free
  atomisp: clean up the hmm init/cleanup indirections
  atomisp: handle allocation calls before init in the hmm layer
  staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
  staging: fsl-dpaa2/eth: Add TODO file
  staging: fsl-dpaa2/eth: Add trace points
  staging: fsl-dpaa2/eth: Add driver specific stats
  staging: fsl-dpaa2/eth: Add ethtool support
  staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
  ...

4 files changed, 109 insertions, 22 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 530809ccfacf..8c24d0892f61 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -55,6 +55,7 @@ Description:
 		then it is to be found in the base device directory.
 
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
 What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
@@ -1593,7 +1594,7 @@ Description:
 		can be processed to siemens per meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw counter device counts from channel Y. For quadrature
@@ -1601,10 +1602,24 @@ Description:
 		the counts of a single quadrature signal phase from channel Y.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw counter device index value from channel Y. This attribute
 		provides an absolute positional reference (e.g. a pulse once per
 		revolution) which may be used to home positional systems as
 		required.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A list of possible counting directions which are:
+		- "up"	: counter device is increasing.
+		- "down": counter device is decreasing.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw counter device counters direction for channel Y.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
new file mode 100644
index 000000000000..6d2d2b094941
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
@@ -0,0 +1,17 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute power drain on
+                common input voltage pin (RS+). In Ohms.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
+Date:		March 2017
+KernelVersion:	4.12
+Contact:	linux-iio@vger.kernel.org
+Description: 	The value of the shunt resistor used to compute current flowing
+                between RS+ and RS- voltage sense inputs. In Ohms.
+
+These attributes describe a single physical component, exposed as two distinct
+attributes as it is used to calculate two different values: power load and
+current flowing between RS+ and RS- inputs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
index ba676520b953..7fac2c268d9a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
+++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
@@ -1,24 +1,16 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Discrete set of available values for the respective counter
 		configuration are listed in this file.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
-KernelVersion:	4.9
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read-only attribute that indicates whether the counter for
-		channel Y is counting up or down.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Count mode for channel Y. Four count modes are available:
@@ -52,7 +44,7 @@ Description:
 			continuously throughout.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Read-only attribute that indicates whether excessive noise is
@@ -60,14 +52,14 @@ Description:
 		irrelevant in non-quadrature clock mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		If the counter device supports preset registers, the preset
 		count for channel Y is provided by this attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Configure channel Y counter for non-quadrature or quadrature
@@ -88,7 +80,7 @@ Description:
 			decoded for UP/DN clock.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Whether to set channel Y counter with channel Y preset value
@@ -96,14 +88,14 @@ Description:
 		Valid attribute values are boolean.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Active level of channel Y index input; irrelevant in
 		non-synchronous load mode.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion:	4.9
+KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Configure channel Y counter for non-synchronous or synchronous
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
index 6534a60037ff..230020e06677 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -3,11 +3,15 @@ KernelVersion:	4.11
 Contact:	benjamin.gaignard@st.com
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "reset"     :	The UG bit from the TIMx_EGR register is
+				used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used
+				as trigger output.
 		- "update"    : The update event is selected as trigger output.
-				For instance a master timer can then be used as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+				For instance a master timer can then be used
+				as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse
+				    when the CC1IF flag is to be set.
 		- "OC1REF"    : OC1REF signal is used as trigger output.
 		- "OC2REF"    : OC2REF signal is used as trigger output.
 		- "OC3REF"    : OC3REF signal is used as trigger output.
@@ -27,3 +31,62 @@ Description:
 		Reading returns the current sampling frequency.
 		Writing an value different of 0 set and start sampling.
 		Writing 0 stop sampling.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current preset value.
+		Writing sets the preset value.
+		When counting up the counter starts from 0 and fires an
+		event when reach preset value.
+		When counting down the counter start from preset value
+		and fire event when reach 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter quadrature modes:
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible enable modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter enable modes, in all case
+		counting direction is set by in_count0_count_direction
+		attribute and the counter is clocked by the internal clock.
+		always:
+			Counter is always ON.
+
+		gated:
+			Counting is enabled when connected trigger signal
+			level is high else counting is disabled.
+
+		triggered:
+			Counting is enabled on rising edge of the connected
+			trigger, and remains enabled for the duration of this
+			selected mode.