Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for the asynchronous SDIO wakeup interrupts
   - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
   - Add support to store error stats from host drivers
   - Extend debugfs to show error stats from host drivers
   - Add single I/O read support in the recovery path for 4k sector cards

  MMC host:
   - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
   - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
   - mmc_spi: Convert corresponding DT bindings to the dtschema
   - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
   - mtk-sd: Add support for SDIO wake irqs
   - mtk-sd: Add support for the Mediatek MT8188 variant
   - renesas_sdhi: Drop redundant manual tap correction for newer SoCs
   - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
   - sdhci/cqhci: Add support to capture stats from host errors
   - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
   - sdhci-msm: Add support for the MSM8998 and SM8450 variant
   - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
   - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
   - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
   - sdhci-pci-gli: Improve I/O read/write performance for GL9763E
   - sdhci-s3c: Convert corresponding DT bindings to the dtschema
   - tmio: Avoid glitches when resetting

  MEMSTICK core:
   - A couple of minor fixes and cleanups"

* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
  mmc: mediatek: add support for SDIO eint wakup IRQ
  mmc: core: Add support for SDIO wakeup interrupt
  dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
  dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
  mmc: renesas_sdhi: newer SoCs don't need manual tap correction
  mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
  mmc: cavium-octeon: Add of_node_put() when breaking out of loop
  mmc: core: quirks: Add of_node_put() when breaking out of loop
  mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
  dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
  mmc: sdhci-msm: drop redundant of_device_id entries
  dt-bindings: mmc: sdhci-msm: add MSM8998
  mmc: block: Add single read for 4k sector cards
  mmc: mxcmmc: Use mmc_card_sdio macro
  mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
  dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
  dt-bindings: mmc: sdhci-msm: fix reg-names entries
  dt-bindings: mmc: Add compatible for MediaTek MT8188
  dt-bindings: mmc: sdhci-msm: document resets
  mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
  ...

49 files changed, 1152 insertions, 362 deletions

diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index 5ecdac9de484..dead421e17d6 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Al Cooper <alcooperx@gmail.com>
   - Florian Fainelli <f.fainelli@gmail.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -42,23 +39,46 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
-    description:
-      handle to core clock for the sdhci controller.
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: handle to improved 150Mhz clock for sdhci controller (Optional clock)
 
   clock-names:
+    minItems: 1
     items:
       - const: sw_sdio
+      - const: sdio_freq # Optional clock
+
+  clock-frequency:
+    description:
+      Maximum operating frequency of sdio_freq sdhci controller clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000000
+    maximum: 150000000
 
   sdhci,auto-cmd12:
     type: boolean
     description: Specifies that controller should use auto CMD12
 
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+    then:
+      required:
+        - clock-frequency
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
deleted file mode 100644
index 753e9d7d8956..000000000000
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-* Samsung Exynos specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
-	  specific extensions.
-	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
-	  specific extensions.
-	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
-	  specific extensions.
-	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
-	  specific extensions having an SMU.
-	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
-	  extensions.
-
-* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
-  unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
-  ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
-
-* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for single
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-
-* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for double
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
-  shift value for hs400 mode operation.
-
-  Notes for the sdr-timing and ddr-timing values:
-
-    The order of the cells should be
-      - First Cell: CIU clock phase shift value for tx mode.
-      - Second Cell: CIU clock phase shift value for rx mode.
-
-    Valid values for SDR and DDR CIU clock timing for Exynos5250:
-      - valid value for tx phase shift and rx phase shift is 0 to 7.
-      - when CIU clock divider value is set to 3, all possible 8 phase shift
-        values can be used.
-      - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
-        phase shift clocks should be 0.
-
-* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
-  (Latency value for delay line in Read path)
-
-Required properties for a slot (Deprecated - Recommend to use one slot per host):
-
-* gpios: specifies a list of gpios used for command, clock and data bus. The
-  first gpio is the command line and the second gpio is the clock line. The
-  rest of the gpios (depending on the bus-width property) are the data lines in
-  no particular order. The format of the gpio specifier depends on the gpio
-  controller.
-(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
-
-Example:
-
-  The MSHC controller node can be split into two portions, SoC specific and
-  board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc0@12200000 {
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		samsung,dw-mshc-hs400-timing = <0 2>;
-		samsung,read-strobe-delay = <90>;
-		bus-width = <8>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
deleted file mode 100644
index 5e74db69f581..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-MMC/SD/SDIO slot directly connected to a SPI bus
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmc_spi driver.
-
-Required properties:
-- spi-max-frequency : maximum frequency for this device (Hz).
-
-Optional properties:
-- voltage-ranges : two cells are required, first cell specifies minimum
-  slot voltage (mV), second cell specifies maximum slot voltage (mV).
-  Several ranges could be specified. If not provided, 3.2v..3.4v is assumed.
-- gpios : may specify GPIOs in this order: Card-Detect GPIO,
-  Write-Protect GPIO. Note that this does not follow the
-  binding from mmc.txt, for historical reasons.
-
-Example:
-
-	mmc-slot@0 {
-		compatible = "fsl,mpc8323rdb-mmc-slot",
-			     "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&qe_pio_d 14 1
-			 &qe_pio_d 15 0>;
-		voltage-ranges = <3300 3300>;
-		spi-max-frequency = <50000000>;
-		interrupts = <42>;
-		interrupt-parent = <&PIC>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 000000000000..c45b91099325
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+  The extra properties used by an mmc connected via SPI.
+
+properties:
+  compatible:
+    const: mmc-spi-slot
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  interrupts:
+    maxItems: 1
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Two cells are required, first cell specifies minimum slot voltage (mV),
+      second cell specifies maximum slot voltage (mV).
+    items:
+      - description: |
+          value for minimum slot voltage in mV
+        default: 3200
+      - description: |
+          value for maximum slot voltage in mV
+        default: 3400
+
+  gpios:
+    description: |
+      For historical reasons, this does not follow the generic mmc-controller
+      binding.
+    minItems: 1
+    items:
+      - description: Card-Detect GPIO
+      - description: Write-Protect GPIO
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mmc@0 {
+        compatible = "mmc-spi-slot";
+        reg = <0>;
+        gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+        voltage-ranges = <3300 3300>;
+        spi-max-frequency = <50000000>;
+        interrupts = <42>;
+        interrupt-parent = <&PIC>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 2a2e9fa8c188..083d1ec2f661 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -30,13 +30,11 @@ properties:
           - const: mediatek,mt7623-mmc
           - const: mediatek,mt2701-mmc
       - items:
-          - const: mediatek,mt8186-mmc
-          - const: mediatek,mt8183-mmc
-      - items:
-          - const: mediatek,mt8192-mmc
-          - const: mediatek,mt8183-mmc
-      - items:
-          - const: mediatek,mt8195-mmc
+          - enum:
+              - mediatek,mt8186-mmc
+              - mediatek,mt8188-mmc
+              - mediatek,mt8192-mmc
+              - mediatek,mt8195-mmc
           - const: mediatek,mt8183-mmc
 
   reg:
@@ -72,12 +70,27 @@ properties:
       - const: ahb_cg
 
   interrupts:
-    maxItems: 1
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: msdc
+      - const: sdio_wakeup
 
   pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
     items:
       - const: default
       - const: state_uhs
+      - const: state_eint
 
   pinctrl-0:
     description:
@@ -89,6 +102,11 @@ properties:
       should contain uhs mode pin ctrl.
     maxItems: 1
 
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
   assigned-clocks:
     description:
       PLL of the source clock.
@@ -208,4 +226,32 @@ examples:
         mediatek,hs400-cmd-resp-sel-rising;
     };
 
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 9ac4986988c5..14945ebc31d2 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -56,11 +56,15 @@ properties:
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r9a07g043 # RZ/G2UL
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
               - renesas,sdhi-r9a07g054 # RZ/V2L
           - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+      - items:
+          - enum:
+              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r8a779f0  # R-Car S4-8
+          - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -141,6 +145,7 @@ allOf:
               enum:
                 - renesas,rcar-gen2-sdhi
                 - renesas,rcar-gen3-sdhi
+                - renesas,rcar-gen4-sdhi
       then:
         properties:
           clocks:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 54fb59820d2b..8d888b435817 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -39,6 +39,7 @@ properties:
               - rockchip,rk3399-dw-mshc
               - rockchip,rk3568-dw-mshc
               - rockchip,rv1108-dw-mshc
+              - rockchip,rv1126-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
new file mode 100644
index 000000000000..fdaa18481aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-dw-mshc
+      - samsung,exynos4412-dw-mshc
+      - samsung,exynos5250-dw-mshc
+      - samsung,exynos5420-dw-mshc
+      - samsung,exynos5420-dw-mshc-smu
+      - samsung,exynos7-dw-mshc
+      - samsung,exynos7-dw-mshc-smu
+      - axis,artpec8-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  samsung,dw-mshc-ciu-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      The divider value for the card interface unit (ciu) clock.
+
+  samsung,dw-mshc-ddr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CUI clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for double data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,dw-mshc-hs400-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description: |
+      The value of CIU TX and RX clock phase shift value for HS400 mode
+      operation.
+      Valid values for SDR and DDR CIU clock timing::
+        - valid value for tx phase shift and rx phase shift is 0 to 7.
+        - when CIU clock divider value is set to 3, all possible 8 phase shift
+          values can be used.
+        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+          phase shift clocks should be 0.
+      If missing, values from samsung,dw-mshc-ddr-timing property are used.
+
+  samsung,dw-mshc-sdr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CIU clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for single data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,read-strobe-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
+      line in Read path). If missing, default from hardware is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - samsung,dw-mshc-ddr-timing
+  - samsung,dw-mshc-sdr-timing
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-dw-mshc
+              - samsung,exynos5420-dw-mshc
+              - samsung,exynos7-dw-mshc
+              - samsung,exynos7-dw-mshc-smu
+              - axis,artpec8-dw-mshc
+    then:
+      required:
+        - samsung,dw-mshc-ciu-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12220000 {
+        compatible = "samsung,exynos5420-dw-mshc";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x12220000 0x1000>;
+        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+        clock-names = "biu", "ciu";
+        fifo-depth = <0x40>;
+        card-detect-delay = <200>;
+        samsung,dw-mshc-ciu-div = <3>;
+        samsung,dw-mshc-sdr-timing = <0 4>;
+        samsung,dw-mshc-ddr-timing = <0 2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        max-frequency = <200000000>;
+        vmmc-supply = <&ldo19_reg>;
+        vqmmc-supply = <&ldo13_reg>;
+        sd-uhs-sdr50;
+        sd-uhs-sdr104;
+        sd-uhs-ddr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
new file mode 100644
index 000000000000..5d873a60f650
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC SDHCI Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-sdhci
+      - samsung,exynos4210-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hsmmc
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-sdhci
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hsmmc
+            - const: mmc_busclk.2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12510000 {
+        compatible = "samsung,exynos4210-sdhci";
+        reg = <0x12510000 0x100>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+        clock-names = "hsmmc", "mmc_busclk.2";
+        bus-width = <4>;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+        pinctrl-names = "default";
+        vmmc-supply = <&ldo21_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
deleted file mode 100644
index 42e0a9afa100..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung's SDHCI Controller device tree bindings
-
-Samsung's SDHCI controller is used as a connectivity interface with external
-MMC, SD and eMMC storage mediums. This file documents differences between the
-core mmc properties described by mmc.txt and the properties used by the
-Samsung implementation of the SDHCI controller.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
-    controller.
-  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
-    controller.
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Example:
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		bus-width = <4>;
-		cd-gpios = <&gpk2 2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	};
-
-	Note: This example shows both SoC specific and board specific properties
-	in a single device node. The properties can be actually be separated
-	into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index e4236334e748..b00578ae1dea 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -17,6 +17,9 @@ description:
 properties:
   compatible:
     oneOf:
+      - enum:
+          - qcom,sdhci-msm-v4
+        deprecated: true
       - items:
           - enum:
               - qcom,apq8084-sdhci
@@ -27,6 +30,10 @@ properties:
               - qcom,msm8992-sdhci
               - qcom,msm8994-sdhci
               - qcom,msm8996-sdhci
+              - qcom,msm8998-sdhci
+          - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+      - items:
+          - enum:
               - qcom,qcs404-sdhci
               - qcom,sc7180-sdhci
               - qcom,sc7280-sdhci
@@ -38,20 +45,16 @@ properties:
               - qcom,sm6350-sdhci
               - qcom,sm8150-sdhci
               - qcom,sm8250-sdhci
-          - enum:
-              - qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
-              - qcom,sdhci-msm-v5 # for sdcc version 5.0
-      - items:
-          - const: qcom,sdhci-msm-v4 # Deprecated (only for backward compatibility)
-                                     # for sdcc versions less than 5.0
+              - qcom,sm8450-sdhci
+          - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
 
   reg:
     minItems: 1
-    items:
-      - description: Host controller register map
-      - description: SD Core register map
-      - description: CQE register map
-      - description: Inline Crypto Engine register map
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
 
   clocks:
     minItems: 3
@@ -93,6 +96,9 @@ properties:
     description:
       Should specify pin control groups used for this controller.
 
+  resets:
+    maxItems: 1
+
   qcom,ddr-config:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: platform specific settings for DDR_CONFIG reg.
@@ -121,6 +127,16 @@ properties:
     description: A phandle to sdhci power domain node
     maxItems: 1
 
+  mmc-ddr-1_8v: true
+
+  mmc-hs200-1_8v: true
+
+  mmc-hs400-1_8v: true
+
+  bus-width: true
+
+  max-frequency: true
+
 patternProperties:
   '^opp-table(-[a-z0-9]+)?$':
     if:
@@ -140,7 +156,47 @@ required:
   - clock-names
   - interrupts
 
-additionalProperties: true
+allOf:
+  - $ref: mmc-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdhci-msm-v4
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Host controller register map
+            - description: SD Core register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 2
+          items:
+            - const: hc
+            - const: core
+            - const: cqhci
+            - const: ice
+    else:
+      properties:
+        reg:
+          minItems: 1
+          items:
+            - description: Host controller register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 1
+          items:
+            - const: hc
+            - const: cqhci
+            - const: ice
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -149,7 +205,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    sdhc_2: sdhci@8804000 {
+    sdhc_2: mmc@8804000 {
       compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
       reg = <0 0x08804000 0 0x1000>;
 
diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index ed9a683b3ca8..ba8414519515 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -1341,17 +1341,17 @@ static int msb_ftl_initialize(struct msb_data *msb)
 	msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE;
 	msb->logical_block_count = msb->zone_count * 496 - 2;
 
-	msb->used_blocks_bitmap = kzalloc(msb->block_count / 8, GFP_KERNEL);
-	msb->erased_blocks_bitmap = kzalloc(msb->block_count / 8, GFP_KERNEL);
+	msb->used_blocks_bitmap = bitmap_zalloc(msb->block_count, GFP_KERNEL);
+	msb->erased_blocks_bitmap = bitmap_zalloc(msb->block_count, GFP_KERNEL);
 	msb->lba_to_pba_table =
 		kmalloc_array(msb->logical_block_count, sizeof(u16),
 			      GFP_KERNEL);
 
 	if (!msb->used_blocks_bitmap || !msb->lba_to_pba_table ||
 						!msb->erased_blocks_bitmap) {
-		kfree(msb->used_blocks_bitmap);
+		bitmap_free(msb->used_blocks_bitmap);
+		bitmap_free(msb->erased_blocks_bitmap);
 		kfree(msb->lba_to_pba_table);
-		kfree(msb->erased_blocks_bitmap);
 		return -ENOMEM;
 	}
 
@@ -1946,7 +1946,8 @@ static DEFINE_MUTEX(msb_disk_lock); /* protects against races in open/release */
 static void msb_data_clear(struct msb_data *msb)
 {
 	kfree(msb->boot_page);
-	kfree(msb->used_blocks_bitmap);
+	bitmap_free(msb->used_blocks_bitmap);
+	bitmap_free(msb->erased_blocks_bitmap);
 	kfree(msb->lba_to_pba_table);
 	kfree(msb->cache);
 	msb->card = NULL;
@@ -2243,8 +2244,8 @@ static int msb_resume(struct memstick_dev *card)
 		goto out;
 
 	if (msb->block_count != new_msb->block_count ||
-		memcmp(msb->used_blocks_bitmap, new_msb->used_blocks_bitmap,
-							msb->block_count / 8))
+	    !bitmap_equal(msb->used_blocks_bitmap, new_msb->used_blocks_bitmap,
+							msb->block_count))
 		goto out;
 
 	card_dead = false;
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index e08e22f0a7c5..ce89611a136e 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -176,7 +176,7 @@ static inline int mmc_blk_part_switch(struct mmc_card *card,
 				      unsigned int part_type);
 static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			       struct mmc_card *card,
-			       int disable_multi,
+			       int recovery_mode,
 			       struct mmc_queue *mq);
 static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
 
@@ -1302,7 +1302,7 @@ static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq)
 }
 
 static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
-			      int disable_multi, bool *do_rel_wr_p,
+			      int recovery_mode, bool *do_rel_wr_p,
 			      bool *do_data_tag_p)
 {
 	struct mmc_blk_data *md = mq->blkdata;
@@ -1368,12 +1368,12 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
 			brq->data.blocks--;
 
 		/*
-		 * After a read error, we redo the request one sector
+		 * After a read error, we redo the request one (native) sector
 		 * at a time in order to accurately determine which
 		 * sectors can be read successfully.
 		 */
-		if (disable_multi)
-			brq->data.blocks = 1;
+		if (recovery_mode)
+			brq->data.blocks = queue_physical_block_size(mq->queue) >> 9;
 
 		/*
 		 * Some controllers have HW issues while operating
@@ -1590,7 +1590,7 @@ static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 
 static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			       struct mmc_card *card,
-			       int disable_multi,
+			       int recovery_mode,
 			       struct mmc_queue *mq)
 {
 	u32 readcmd, writecmd;
@@ -1599,7 +1599,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	struct mmc_blk_data *md = mq->blkdata;
 	bool do_rel_wr, do_data_tag;
 
-	mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag);
+	mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
 
 	brq->mrq.cmd = &brq->cmd;
 
@@ -1690,7 +1690,7 @@ static int mmc_blk_fix_state(struct mmc_card *card, struct request *req)
 
 #define MMC_READ_SINGLE_RETRIES	2
 
-/* Single sector read during recovery */
+/* Single (native) sector read during recovery */
 static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req)
 {
 	struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
@@ -1698,6 +1698,7 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req)
 	struct mmc_card *card = mq->card;
 	struct mmc_host *host = card->host;
 	blk_status_t error = BLK_STS_OK;
+	size_t bytes_per_read = queue_physical_block_size(mq->queue);
 
 	do {
 		u32 status;
@@ -1732,13 +1733,13 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req)
 		else
 			error = BLK_STS_OK;
 
-	} while (blk_update_request(req, error, 512));
+	} while (blk_update_request(req, error, bytes_per_read));
 
 	return;
 
 error_exit:
 	mrq->data->bytes_xfered = 0;
-	blk_update_request(req, BLK_STS_IOERR, 512);
+	blk_update_request(req, BLK_STS_IOERR, bytes_per_read);
 	/* Let it try the remaining request again */
 	if (mqrq->retries > MMC_MAX_RETRIES - 1)
 		mqrq->retries = MMC_MAX_RETRIES - 1;
@@ -1879,10 +1880,9 @@ static void mmc_blk_mq_rw_recovery(struct mmc_queue *mq, struct request *req)
 		return;
 	}
 
-	/* FIXME: Missing single sector read for large sector size */
-	if (!mmc_large_sector(card) && rq_data_dir(req) == READ &&
-	    brq->data.blocks > 1) {
-		/* Read one sector at a time */
+	if (rq_data_dir(req) == READ && brq->data.blocks >
+			queue_physical_block_size(mq->queue) >> 9) {
+		/* Read one (native) sector at a time */
 		mmc_blk_read_single(mq, req);
 		return;
 	}
@@ -2988,7 +2988,7 @@ static int mmc_blk_probe(struct mmc_card *card)
 	 * Don't enable runtime PM for SD-combo cards here. Leave that
 	 * decision to be taken during the SDIO init sequence instead.
 	 */
-	if (card->type != MMC_TYPE_SD_COMBO) {
+	if (!mmc_card_sd_combo(card)) {
 		pm_runtime_set_active(&card->dev);
 		pm_runtime_enable(&card->dev);
 	}
@@ -3015,7 +3015,7 @@ static void mmc_blk_remove(struct mmc_card *card)
 		mmc_blk_part_switch(card, md->part_type);
 		mmc_release_host(card->host);
 	}
-	if (card->type != MMC_TYPE_SD_COMBO)
+	if (!mmc_card_sd_combo(card))
 		pm_runtime_disable(&card->dev);
 	pm_runtime_put_noidle(&card->dev);
 	mmc_blk_remove_req(md);
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 58a60afa650b..d8762fa3d5cd 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -85,7 +85,7 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 			return retval;
 	}
 
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+	if (mmc_card_sdio(card) || mmc_card_sd_combo(card)) {
 		retval = add_uevent_var(env, "SDIO_ID=%04X:%04X",
 					card->cis.vendor, card->cis.device);
 		if (retval)
@@ -107,7 +107,7 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 	 * SDIO (non-combo) cards are not handled by mmc_block driver and do not
 	 * have accessible CID register which used by mmc_card_name() function.
 	 */
-	if (card->type == MMC_TYPE_SDIO)
+	if (mmc_card_sdio(card))
 		return 0;
 
 	retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card));
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 4b70cbfc6d5d..ef53a2578824 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -943,9 +943,11 @@ int mmc_execute_tuning(struct mmc_card *card)
 	}
 
 	/* Only print error when we don't check for card removal */
-	if (!host->detect_change)
+	if (!host->detect_change) {
 		pr_err("%s: tuning execution failed: %d\n",
 			mmc_hostname(host), err);
+		mmc_debugfs_err_stats_inc(host, MMC_ERR_TUNING);
+	}
 
 	return err;
 }
@@ -2244,6 +2246,12 @@ void mmc_rescan(struct work_struct *work)
 		if (freqs[i] <= host->f_min)
 			break;
 	}
+
+	/*
+	 * Ignore the command timeout errors observed during
+	 * the card init as those are excepted.
+	 */
+	host->err_stats[MMC_ERR_CMD_TIMEOUT] = 0;
 	mmc_release_host(host);
 
  out:
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 3fdbc801e64a..fe6808771bc7 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -223,6 +223,81 @@ static int mmc_clock_opt_set(void *data, u64 val)
 DEFINE_DEBUGFS_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
 	"%llu\n");
 
+static int mmc_err_state_get(void *data, u64 *val)
+{
+	struct mmc_host *host = data;
+	int i;
+
+	if (!host)
+		return -EINVAL;
+
+	*val = 0;
+	for (i = 0; i < MMC_ERR_MAX; i++) {
+		if (host->err_stats[i]) {
+			*val = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(mmc_err_state, mmc_err_state_get, NULL, "%llu\n");
+
+static int mmc_err_stats_show(struct seq_file *file, void *data)
+{
+	struct mmc_host *host = (struct mmc_host *)file->private;
+	const char *desc[MMC_ERR_MAX] = {
+		[MMC_ERR_CMD_TIMEOUT] = "Command Timeout Occurred",
+		[MMC_ERR_CMD_CRC] = "Command CRC Errors Occurred",
+		[MMC_ERR_DAT_TIMEOUT] = "Data Timeout Occurred",
+		[MMC_ERR_DAT_CRC] = "Data CRC Errors Occurred",
+		[MMC_ERR_AUTO_CMD] = "Auto-Cmd Error Occurred",
+		[MMC_ERR_ADMA] = "ADMA Error Occurred",
+		[MMC_ERR_TUNING] = "Tuning Error Occurred",
+		[MMC_ERR_CMDQ_RED] = "CMDQ RED Errors",
+		[MMC_ERR_CMDQ_GCE] = "CMDQ GCE Errors",
+		[MMC_ERR_CMDQ_ICCE] = "CMDQ ICCE Errors",
+		[MMC_ERR_REQ_TIMEOUT] = "Request Timedout",
+		[MMC_ERR_CMDQ_REQ_TIMEOUT] = "CMDQ Request Timedout",
+		[MMC_ERR_ICE_CFG] = "ICE Config Errors",
+		[MMC_ERR_CTRL_TIMEOUT] = "Controller Timedout errors",
+		[MMC_ERR_UNEXPECTED_IRQ] = "Unexpected IRQ errors",
+	};
+	int i;
+
+	for (i = 0; i < MMC_ERR_MAX; i++) {
+		if (desc[i])
+			seq_printf(file, "# %s:\t %d\n",
+					desc[i], host->err_stats[i]);
+	}
+
+	return 0;
+}
+
+static int mmc_err_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mmc_err_stats_show, inode->i_private);
+}
+
+static ssize_t mmc_err_stats_write(struct file *filp, const char __user *ubuf,
+				   size_t cnt, loff_t *ppos)
+{
+	struct mmc_host *host = filp->f_mapping->host->i_private;
+
+	pr_debug("%s: Resetting MMC error statistics\n", __func__);
+	memset(host->err_stats, 0, sizeof(host->err_stats));
+
+	return cnt;
+}
+
+static const struct file_operations mmc_err_stats_fops = {
+	.open	= mmc_err_stats_open,
+	.read	= seq_read,
+	.write	= mmc_err_stats_write,
+	.release = single_release,
+};
+
 void mmc_add_host_debugfs(struct mmc_host *host)
 {
 	struct dentry *root;
@@ -236,6 +311,11 @@ void mmc_add_host_debugfs(struct mmc_host *host)
 	debugfs_create_file_unsafe("clock", S_IRUSR | S_IWUSR, root, host,
 				   &mmc_clock_fops);
 
+	debugfs_create_file_unsafe("err_state", 0600, root, host,
+			    &mmc_err_state);
+	debugfs_create_file("err_stats", 0600, root, host,
+			    &mmc_err_stats_fops);
+
 #ifdef CONFIG_FAIL_MMC_REQUEST
 	if (fail_request)
 		setup_fault_attr(&fail_default_attr, fail_request);
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 2ed2b4d5e5a5..0fd91f749b3a 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -599,7 +599,7 @@ static int mmc_validate_host_caps(struct mmc_host *host)
 	}
 
 	if (caps2 & (MMC_CAP2_HS400_ES | MMC_CAP2_HS400) &&
-	    !(caps & MMC_CAP_8_BIT_DATA)) {
+	    !(caps & MMC_CAP_8_BIT_DATA) && !(caps2 & MMC_CAP2_NO_MMC)) {
 		dev_warn(dev, "drop HS400 support since no 8-bit bus\n");
 		host->caps2 = caps2 & ~MMC_CAP2_HS400_ES & ~MMC_CAP2_HS400;
 	}
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index f879dc63d936..be4393988086 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -163,8 +163,10 @@ static inline bool mmc_fixup_of_compatible_match(struct mmc_card *card,
 	struct device_node *np;
 
 	for_each_child_of_node(mmc_dev(card->host)->of_node, np) {
-		if (of_device_is_compatible(np, compatible))
+		if (of_device_is_compatible(np, compatible)) {
+			of_node_put(np);
 			return true;
+		}
 	}
 
 	return false;
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c5f1df6ce4c0..cee4c0b59f43 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -793,7 +793,7 @@ static umode_t sd_std_is_visible(struct kobject *kobj, struct attribute *attr,
 	     attr == &dev_attr_info2.attr ||
 	     attr == &dev_attr_info3.attr ||
 	     attr == &dev_attr_info4.attr
-	    ) && card->type != MMC_TYPE_SD_COMBO)
+	    ) &&!mmc_card_sd_combo(card))
 		return 0;
 
 	return attr->mode;
@@ -870,7 +870,7 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 25799accf8a0..0b682a31cd3e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -226,6 +226,20 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
 				card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
 			if (data & SDIO_DRIVE_SDTD)
 				card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
+
+			ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, &data);
+			if (ret)
+				goto out;
+
+			if (data & SDIO_INTERRUPT_EXT_SAI) {
+				data |= SDIO_INTERRUPT_EXT_EAI;
+				ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT,
+						       data, NULL);
+				if (ret)
+					goto out;
+
+				card->cccr.enable_async_irq = 1;
+			}
 		}
 
 		/* if no uhs mode ensure we check for high speed */
@@ -335,7 +349,7 @@ static int sdio_disable_4bit_bus(struct mmc_card *card)
 {
 	int err;
 
-	if (card->type == MMC_TYPE_SDIO)
+	if (mmc_card_sdio(card))
 		goto out;
 
 	if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
@@ -360,7 +374,7 @@ static int sdio_enable_4bit_bus(struct mmc_card *card)
 	err = sdio_enable_wide(card);
 	if (err <= 0)
 		return err;
-	if (card->type == MMC_TYPE_SDIO)
+	if (mmc_card_sdio(card))
 		goto out;
 
 	if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) {
@@ -415,7 +429,7 @@ static int sdio_enable_hs(struct mmc_card *card)
 	int ret;
 
 	ret = mmc_sdio_switch_hs(card, true);
-	if (ret <= 0 || card->type == MMC_TYPE_SDIO)
+	if (ret <= 0 || mmc_card_sdio(card))
 		return ret;
 
 	ret = mmc_sd_switch_hs(card);
@@ -441,7 +455,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
 		max_dtr = card->cis.max_dtr;
 	}
 
-	if (card->type == MMC_TYPE_SD_COMBO)
+	if (mmc_card_sd_combo(card))
 		max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
 
 	return max_dtr;
@@ -689,7 +703,7 @@ try_again:
 	    mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
 		card->type = MMC_TYPE_SD_COMBO;
 
-		if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
+		if (oldcard && (!mmc_card_sd_combo(oldcard) ||
 		    memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
 			err = -ENOENT;
 			goto mismatch;
@@ -697,7 +711,7 @@ try_again:
 	} else {
 		card->type = MMC_TYPE_SDIO;
 
-		if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
+		if (oldcard && !mmc_card_sdio(oldcard)) {
 			err = -ENOENT;
 			goto mismatch;
 		}
@@ -754,7 +768,7 @@ try_again:
 	/*
 	 * Read CSD, before selecting the card
 	 */
-	if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
+	if (!oldcard && mmc_card_sd_combo(card)) {
 		err = mmc_sd_get_csd(card);
 		if (err)
 			goto remove;
@@ -827,7 +841,7 @@ try_again:
 
 	mmc_fixup_device(card, sdio_fixup_methods);
 
-	if (card->type == MMC_TYPE_SD_COMBO) {
+	if (mmc_card_sd_combo(card)) {
 		err = mmc_sd_setup_card(host, card, oldcard != NULL);
 		/* handle as SDIO-only card if memory init failed */
 		if (err) {
diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c
index 2c4b2df52adb..12dca91a8ef6 100644
--- a/drivers/mmc/host/cavium-octeon.c
+++ b/drivers/mmc/host/cavium-octeon.c
@@ -277,6 +277,7 @@ static int octeon_mmc_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "Error populating slots\n");
 			octeon_mmc_set_shared_power(host, 0);
+			of_node_put(cn);
 			goto error;
 		}
 		i++;
diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c
index 76013bbbcff3..202b1d6da678 100644
--- a/drivers/mmc/host/cavium-thunderx.c
+++ b/drivers/mmc/host/cavium-thunderx.c
@@ -142,8 +142,10 @@ static int thunder_mmc_probe(struct pci_dev *pdev,
 				continue;
 
 			ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host);
-			if (ret)
+			if (ret) {
+				of_node_put(child_node);
 				goto error;
+			}
 		}
 		i++;
 	}
diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c
index b0d30c35c390..b3d7d6d8d654 100644
--- a/drivers/mmc/host/cqhci-core.c
+++ b/drivers/mmc/host/cqhci-core.c
@@ -822,8 +822,15 @@ irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error,
 	pr_debug("%s: cqhci: IRQ status: 0x%08x\n", mmc_hostname(mmc), status);
 
 	if ((status & (CQHCI_IS_RED | CQHCI_IS_GCE | CQHCI_IS_ICCE)) ||
-	    cmd_error || data_error)
+	    cmd_error || data_error) {
+		if (status & CQHCI_IS_RED)
+			mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_RED);
+		if (status & CQHCI_IS_GCE)
+			mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_GCE);
+		if (status & CQHCI_IS_ICCE)
+			mmc_debugfs_err_stats_inc(mmc, MMC_ERR_CMDQ_ICCE);
 		cqhci_error_irq(mmc, status, cmd_error, data_error);
+	}
 
 	if (status & CQHCI_IS_TCC) {
 		/* read TCN and complete the request */
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index ca5be4445ae0..9f20ac524c8b 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -670,7 +670,9 @@ static int dw_mci_exynos_remove(struct platform_device *pdev)
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	return dw_mci_pltfm_remove(pdev);
+	dw_mci_pltfm_remove(pdev);
+
+	return 0;
 }
 
 static const struct dev_pm_ops dw_mci_exynos_pmops = {
diff --git a/drivers/mmc/host/dw_mmc-hi3798cv200.c b/drivers/mmc/host/dw_mmc-hi3798cv200.c
index e9437ef8ef19..6f22fe054087 100644
--- a/drivers/mmc/host/dw_mmc-hi3798cv200.c
+++ b/drivers/mmc/host/dw_mmc-hi3798cv200.c
@@ -179,7 +179,9 @@ static int dw_mci_hi3798cv200_remove(struct platform_device *pdev)
 	clk_disable_unprepare(priv->drive_clk);
 	clk_disable_unprepare(priv->sample_clk);
 
-	return dw_mci_pltfm_remove(pdev);
+	dw_mci_pltfm_remove(pdev);
+
+	return 0;
 }
 
 static const struct of_device_id dw_mci_hi3798cv200_match[] = {
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index f825487aa739..2a99f15f527f 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -377,7 +377,9 @@ static int dw_mci_rockchip_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	return dw_mci_pltfm_remove(pdev);
+	dw_mci_pltfm_remove(pdev);
+
+	return 0;
 }
 
 static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 01159eaf8694..012aa85489d8 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -762,7 +762,7 @@ int mmci_dmae_setup(struct mmci_host *host)
 
 	/*
 	 * If only an RX channel is specified, the driver will
-	 * attempt to use it bidirectionally, however if it is
+	 * attempt to use it bidirectionally, however if it
 	 * is specified but cannot be located, DMA will be disabled.
 	 */
 	if (dmae->rx_channel && !dmae->tx_channel)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 9da4489dc345..4ff73d1883de 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014-2015 MediaTek Inc.
+ * Copyright (c) 2014-2015, 2022 MediaTek Inc.
  * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
  */
 
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -440,8 +441,10 @@ struct msdc_host {
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pins_default;
 	struct pinctrl_state *pins_uhs;
+	struct pinctrl_state *pins_eint;
 	struct delayed_work req_timeout;
 	int irq;		/* host interrupt */
+	int eint_irq;		/* interrupt from sdio device for waking up system */
 	struct reset_control *reset;
 
 	struct clk *src_clk;	/* msdc source clock */
@@ -1521,17 +1524,46 @@ static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
 
 static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
-	unsigned long flags;
 	struct msdc_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&host->lock, flags);
 	__msdc_enable_sdio_irq(host, enb);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if (enb)
-		pm_runtime_get_noresume(host->dev);
-	else
-		pm_runtime_put_noidle(host->dev);
+	if (mmc_card_enable_async_irq(mmc->card) && host->pins_eint) {
+		if (enb) {
+			/*
+			 * In dev_pm_set_dedicated_wake_irq_reverse(), eint pin will be set to
+			 * GPIO mode. We need to restore it to SDIO DAT1 mode after that.
+			 * Since the current pinstate is pins_uhs, to ensure pinctrl select take
+			 * affect successfully, we change the pinstate to pins_eint firstly.
+			 */
+			pinctrl_select_state(host->pinctrl, host->pins_eint);
+			ret = dev_pm_set_dedicated_wake_irq_reverse(host->dev, host->eint_irq);
+
+			if (ret) {
+				dev_err(host->dev, "Failed to register SDIO wakeup irq!\n");
+				host->pins_eint = NULL;
+				pm_runtime_get_noresume(host->dev);
+			} else {
+				dev_dbg(host->dev, "SDIO eint irq: %d!\n", host->eint_irq);
+			}
+
+			pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		} else {
+			dev_pm_clear_wake_irq(host->dev);
+		}
+	} else {
+		if (enb) {
+			/* Ensure host->pins_eint is NULL */
+			host->pins_eint = NULL;
+			pm_runtime_get_noresume(host->dev);
+		} else {
+			pm_runtime_put_noidle(host->dev);
+		}
+	}
 }
 
 static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
@@ -2319,7 +2351,7 @@ static int msdc_execute_hs400_tuning(struct mmc_host *mmc, struct mmc_card *card
 	else
 		val = readl(host->base + PAD_DS_TUNE);
 
-	dev_info(host->dev, "Fianl PAD_DS_TUNE: 0x%x\n", val);
+	dev_info(host->dev, "Final PAD_DS_TUNE: 0x%x\n", val);
 
 	return 0;
 
@@ -2635,6 +2667,20 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* Support for SDIO eint irq ? */
+	if ((mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) && (mmc->pm_caps & MMC_PM_KEEP_POWER)) {
+		host->eint_irq = platform_get_irq_byname(pdev, "sdio_wakeup");
+		if (host->eint_irq > 0) {
+			host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint");
+			if (IS_ERR(host->pins_eint)) {
+				dev_err(&pdev->dev, "Cannot find pinctrl eint!\n");
+				host->pins_eint = NULL;
+			} else {
+				device_init_wakeup(&pdev->dev, true);
+			}
+		}
+	}
+
 	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;
@@ -2849,6 +2895,15 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev)
 	struct msdc_host *host = mmc_priv(mmc);
 
 	msdc_save_reg(host);
+
+	if (sdio_irq_claimed(mmc)) {
+		if (host->pins_eint) {
+			disable_irq(host->irq);
+			pinctrl_select_state(host->pinctrl, host->pins_eint);
+		}
+
+		__msdc_enable_sdio_irq(host, 0);
+	}
 	msdc_gate_clock(host);
 	return 0;
 }
@@ -2864,12 +2919,18 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
 		return ret;
 
 	msdc_restore_reg(host);
+
+	if (sdio_irq_claimed(mmc) && host->pins_eint) {
+		pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		enable_irq(host->irq);
+	}
 	return 0;
 }
 
 static int __maybe_unused msdc_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
 	int ret;
 
 	if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2878,11 +2939,24 @@ static int __maybe_unused msdc_suspend(struct device *dev)
 			return ret;
 	}
 
+	/*
+	 * Bump up runtime PM usage counter otherwise dev->power.needs_force_resume will
+	 * not be marked as 1, pm_runtime_force_resume() will go out directly.
+	 */
+	if (sdio_irq_claimed(mmc) && host->pins_eint)
+		pm_runtime_get_noresume(dev);
+
 	return pm_runtime_force_suspend(dev);
 }
 
 static int __maybe_unused msdc_resume(struct device *dev)
 {
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
+
+	if (sdio_irq_claimed(mmc) && host->pins_eint)
+		pm_runtime_put_noidle(dev);
+
 	return pm_runtime_force_resume(dev);
 }
 
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index de04b5afef2e..2cf0413407ea 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -923,7 +923,7 @@ static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
 	 * One way to prevent this is to only allow 1-bit transfers.
 	 */
 
-	if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO)
+	if (is_imx31_mmc(mxcmci) && mmc_card_sdio(card))
 		host->caps &= ~MMC_CAP_4_BIT_DATA;
 	else
 		host->caps |= MMC_CAP_4_BIT_DATA;
@@ -1025,7 +1025,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	host->devtype = (enum mxcmci_type)of_device_get_match_data(&pdev->dev);
+	host->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev);
 
 	/* adjust max_segs after devtype detection */
 	if (!is_mpc512x_mmc(host))
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index 1a1e3e020a8c..c4abfee1ebae 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -43,6 +43,7 @@ struct renesas_sdhi_quirks {
 	bool hs400_4taps;
 	bool fixed_addr_mode;
 	bool dma_one_rx_only;
+	bool manual_tap_correction;
 	u32 hs400_bad_taps;
 	const u8 (*hs400_calib_table)[SDHI_CALIB_TABLE_MAX];
 };
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 4404ca1f98d8..6edbf5c161ab 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -49,9 +49,6 @@
 #define HOST_MODE_GEN3_32BIT	(HOST_MODE_GEN3_WMODE | HOST_MODE_GEN3_BUSWIDTH)
 #define HOST_MODE_GEN3_64BIT	0
 
-#define CTL_SDIF_MODE	0xe6
-#define SDIF_MODE_HS400		BIT(0)
-
 #define SDHI_VER_GEN2_SDR50	0x490c
 #define SDHI_VER_RZ_A1		0x820b
 /* very old datasheets said 0x490c for SDR104, too. They are wrong! */
@@ -383,8 +380,7 @@ static void renesas_sdhi_hs400_complete(struct mmc_host *mmc)
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF,
 		       priv->scc_tappos_hs400);
 
-	/* Gen3 can't do automatic tap correction with HS400, so disable it */
-	if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC)
+	if (priv->quirks && priv->quirks->manual_tap_correction)
 		sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 			       ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
 			       sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
@@ -562,23 +558,25 @@ static void renesas_sdhi_scc_reset(struct tmio_mmc_host *host, struct renesas_sd
 }
 
 /* only populated for TMIO_MMC_MIN_RCAR2 */
-static void renesas_sdhi_reset(struct tmio_mmc_host *host)
+static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve)
 {
 	struct renesas_sdhi *priv = host_to_priv(host);
 	int ret;
 	u16 val;
 
-	if (priv->rstc) {
-		reset_control_reset(priv->rstc);
-		/* Unknown why but without polling reset status, it will hang */
-		read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100,
-				  false, priv->rstc);
-		/* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */
-		sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
-		priv->needs_adjust_hs400 = false;
-		renesas_sdhi_set_clock(host, host->clk_cache);
-	} else if (priv->scc_ctl) {
-		renesas_sdhi_scc_reset(host, priv);
+	if (!preserve) {
+		if (priv->rstc) {
+			reset_control_reset(priv->rstc);
+			/* Unknown why but without polling reset status, it will hang */
+			read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100,
+					  false, priv->rstc);
+			/* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */
+			sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+			priv->needs_adjust_hs400 = false;
+			renesas_sdhi_set_clock(host, host->clk_cache);
+		} else if (priv->scc_ctl) {
+			renesas_sdhi_scc_reset(host, priv);
+		}
 	}
 
 	if (sd_ctrl_read16(host, CTL_VERSION) >= SDHI_VER_GEN3_SD) {
@@ -719,7 +717,7 @@ static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
 
 	/* Change TAP position according to correction status */
-	if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC &&
+	if (priv->quirks && priv->quirks->manual_tap_correction &&
 	    host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
 		u32 bad_taps = priv->quirks ? priv->quirks->hs400_bad_taps : 0;
 		/*
@@ -938,6 +936,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 	if (IS_ERR(priv->clk_cd))
 		return dev_err_probe(&pdev->dev, PTR_ERR(priv->clk_cd), "cannot get cd clock");
 
+	priv->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return PTR_ERR(priv->rstc);
+
 	priv->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (!IS_ERR(priv->pinctrl)) {
 		priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
@@ -1030,10 +1032,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 	if (ret)
 		goto efree;
 
-	priv->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(priv->rstc))
-		return PTR_ERR(priv->rstc);
-
 	ver = sd_ctrl_read16(host, CTL_VERSION);
 	/* GEN2_SDR104 is first known SDHI to use 32bit block count */
 	if (ver < SDHI_VER_GEN2_SDR104 && mmc_data->max_blk_count > U16_MAX)
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 3084b15ae2cb..42937596c4c4 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -170,6 +170,7 @@ static const struct renesas_sdhi_quirks sdhi_quirks_4tap_nohs400_one_rx = {
 static const struct renesas_sdhi_quirks sdhi_quirks_4tap = {
 	.hs400_4taps = true,
 	.hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
+	.manual_tap_correction = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = {
@@ -182,25 +183,30 @@ static const struct renesas_sdhi_quirks sdhi_quirks_fixed_addr = {
 
 static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps1357 = {
 	.hs400_bad_taps = BIT(1) | BIT(3) | BIT(5) | BIT(7),
+	.manual_tap_correction = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps2367 = {
 	.hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
+	.manual_tap_correction = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_r8a7796_es13 = {
 	.hs400_4taps = true,
 	.hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
 	.hs400_calib_table = r8a7796_es13_calib_table,
+	.manual_tap_correction = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_r8a77965 = {
 	.hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
 	.hs400_calib_table = r8a77965_calib_table,
+	.manual_tap_correction = true,
 };
 
 static const struct renesas_sdhi_quirks sdhi_quirks_r8a77990 = {
 	.hs400_calib_table = r8a77990_calib_table,
+	.manual_tap_correction = true,
 };
 
 /*
@@ -268,6 +274,7 @@ static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
 	{ .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, },
 	{ .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, },
 	{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
+	{ .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, renesas_sdhi_internal_dmac_of_match);
@@ -321,7 +328,7 @@ renesas_sdhi_internal_dmac_dataend_dma(struct tmio_mmc_host *host)
 }
 
 /*
- * renesas_sdhi_internal_dmac_map() will be called with two difference
+ * renesas_sdhi_internal_dmac_map() will be called with two different
  * sg pointers in two mmc_data by .pre_req(), but tmio host can have a single
  * sg_ptr only. So, renesas_sdhi_internal_dmac_{un}map() should use a sg
  * pointer in a mmc_data instead of host->sg_ptr.
@@ -355,7 +362,7 @@ renesas_sdhi_internal_dmac_map(struct tmio_mmc_host *host,
 
 	data->host_cookie = cookie;
 
-	/* This DMAC cannot handle if buffer is not 128-bytes alignment */
+	/* This DMAC needs buffers to be 128-byte aligned */
 	if (!IS_ALIGNED(sg_dma_address(data->sg), 128)) {
 		renesas_sdhi_internal_dmac_unmap(host, data, cookie);
 		return false;
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index 8eb57de48e0c..aff36a933ebe 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -31,6 +31,8 @@
 struct sdhci_brcmstb_priv {
 	void __iomem *cfg_regs;
 	unsigned int flags;
+	struct clk *base_clk;
+	u32 base_freq_hz;
 };
 
 struct brcmstb_match_priv {
@@ -250,9 +252,11 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host;
 	const struct of_device_id *match;
 	struct sdhci_brcmstb_priv *priv;
+	u32 actual_clock_mhz;
 	struct sdhci_host *host;
 	struct resource *iomem;
 	struct clk *clk;
+	struct clk *base_clk = NULL;
 	int res;
 
 	match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
@@ -330,6 +334,35 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
+	/* Change the base clock frequency if the DT property exists */
+	if (device_property_read_u32(&pdev->dev, "clock-frequency",
+				     &priv->base_freq_hz) != 0)
+		goto add_host;
+
+	base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq");
+	if (IS_ERR(base_clk)) {
+		dev_warn(&pdev->dev, "Clock for \"sdio_freq\" not found\n");
+		goto add_host;
+	}
+
+	res = clk_prepare_enable(base_clk);
+	if (res)
+		goto err;
+
+	/* set improved clock rate */
+	clk_set_rate(base_clk, priv->base_freq_hz);
+	actual_clock_mhz = clk_get_rate(base_clk) / 1000000;
+
+	host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK;
+	host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT);
+	/* Disable presets because they are now incorrect */
+	host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+	dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n",
+		actual_clock_mhz);
+	priv->base_clk = base_clk;
+
+add_host:
 	res = sdhci_brcmstb_add_host(host, priv);
 	if (res)
 		goto err;
@@ -340,6 +373,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 err:
 	sdhci_pltfm_free(pdev);
 err_clk:
+	clk_disable_unprepare(base_clk);
 	clk_disable_unprepare(clk);
 	return res;
 }
@@ -351,11 +385,51 @@ static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
 
 MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_brcmstb_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	clk_disable_unprepare(priv->base_clk);
+	return sdhci_pltfm_suspend(dev);
+}
+
+static int sdhci_brcmstb_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = sdhci_pltfm_resume(dev);
+	if (!ret && priv->base_freq_hz) {
+		ret = clk_prepare_enable(priv->base_clk);
+		/*
+		 * Note: using clk_get_rate() below as clk_get_rate()
+		 * honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate()
+		 * may do implicit get_rate() calls that do not honor
+		 * CLK_GET_RATE_NOCACHE.
+		 */
+		if (!ret &&
+		    (clk_get_rate(priv->base_clk) != priv->base_freq_hz))
+			ret = clk_set_rate(priv->base_clk, priv->base_freq_hz);
+	}
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_brcmstb_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume)
+};
+
 static struct platform_driver sdhci_brcmstb_driver = {
 	.driver		= {
 		.name	= "sdhci-brcmstb",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-		.pm	= &sdhci_pltfm_pmops,
+		.pm	= &sdhci_brcmstb_pmops,
 		.of_match_table = of_match_ptr(sdhci_brcm_of_match),
 	},
 	.probe		= sdhci_brcmstb_probe,
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e395411fb6fd..dc2991422a87 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2435,33 +2435,12 @@ static const struct sdhci_msm_variant_info sdm845_sdhci_var = {
 };
 
 static const struct of_device_id sdhci_msm_dt_match[] = {
-	 /* Following two entries are deprecated (kept only for backward compatibility) */
-	{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
-	/* Add entries for sdcc versions less than 5.0 here */
-	{.compatible = "qcom,apq8084-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8226-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8916-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8953-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8974-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8992-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8994-sdhci", .data = &sdhci_msm_mci_var},
-	{.compatible = "qcom,msm8996-sdhci", .data = &sdhci_msm_mci_var},
 	/*
-	 * Add entries for sdcc version 5.0 here. For SDCC version 5.0.0,
-	 * MCI registers are removed from SDCC interface and some registers
-	 * are moved to HC.
+	 * Do not add new variants to the driver which are compatible with
+	 * generic ones, unless they need customization.
 	 */
-	{.compatible = "qcom,qcs404-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sdx55-sdhci",  .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sdx65-sdhci",  .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sdm630-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sm6125-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sm6350-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sm8150-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sm8250-sdhci", .data = &sdhci_msm_v5_var},
-	{.compatible = "qcom,sc7280-sdhci", .data = &sdhci_msm_v5_var},
-	/* Add entries where soc specific handling is required, here */
+	{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
+	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
 	{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
 	{.compatible = "qcom,sc7180-sdhci", .data = &sdm845_sdhci_var},
 	{},
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 757801dfc308..3997cad1f793 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1733,7 +1733,6 @@ err_pltfm_free:
 
 static int sdhci_arasan_remove(struct platform_device *pdev)
 {
-	int ret;
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
@@ -1747,11 +1746,11 @@ static int sdhci_arasan_remove(struct platform_device *pdev)
 
 	sdhci_arasan_unregister_sdclk(&pdev->dev);
 
-	ret = sdhci_pltfm_unregister(pdev);
+	sdhci_pltfm_unregister(pdev);
 
 	clk_disable_unprepare(clk_ahb);
 
-	return ret;
+	return 0;
 }
 
 static struct platform_driver sdhci_arasan_driver = {
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 10fb4cb2c731..cd0134580a90 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -100,8 +100,13 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
 					 unsigned int timing)
 {
-	if (timing == MMC_TIMING_MMC_DDR52)
-		sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
+	u8 mc1r;
+
+	if (timing == MMC_TIMING_MMC_DDR52) {
+		mc1r = sdhci_readb(host, SDMMC_MC1R);
+		mc1r |= SDMMC_MC1R_DDR;
+		sdhci_writeb(host, mc1r, SDMMC_MC1R);
+	}
 	sdhci_set_uhs_signaling(host, timing);
 }
 
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index bac874ab0b33..4e904850973c 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/reset.h>
 #include <linux/sizes.h>
 
 #include "sdhci-pltfm.h"
@@ -30,6 +31,7 @@
 /* Offset inside the  vendor area 1 */
 #define DWCMSHC_HOST_CTRL3		0x8
 #define DWCMSHC_EMMC_CONTROL		0x2c
+#define DWCMSHC_CARD_IS_EMMC		BIT(0)
 #define DWCMSHC_ENHANCED_STROBE		BIT(8)
 #define DWCMSHC_EMMC_ATCTRL		0x40
 
@@ -38,7 +40,7 @@
 #define DWCMSHC_EMMC_DLL_RXCLK		0x804
 #define DWCMSHC_EMMC_DLL_TXCLK		0x808
 #define DWCMSHC_EMMC_DLL_STRBIN		0x80c
-#define DLL_STRBIN_TAPNUM_FROM_SW	BIT(24)
+#define DECMSHC_EMMC_DLL_CMDOUT		0x810
 #define DWCMSHC_EMMC_DLL_STATUS0	0x840
 #define DWCMSHC_EMMC_DLL_START		BIT(0)
 #define DWCMSHC_EMMC_DLL_LOCKED		BIT(8)
@@ -47,22 +49,39 @@
 #define DWCMSHC_EMMC_DLL_START_POINT	16
 #define DWCMSHC_EMMC_DLL_INC		8
 #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
-#define DLL_TXCLK_TAPNUM_DEFAULT	0x8
-#define DLL_STRBIN_TAPNUM_DEFAULT	0x8
+#define DLL_TXCLK_TAPNUM_DEFAULT	0x10
+#define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
 #define DLL_TXCLK_TAPNUM_FROM_SW	BIT(24)
+#define DLL_STRBIN_TAPNUM_DEFAULT	0x8
+#define DLL_STRBIN_TAPNUM_FROM_SW	BIT(24)
+#define DLL_STRBIN_DELAY_NUM_SEL	BIT(26)
+#define DLL_STRBIN_DELAY_NUM_OFFSET	16
+#define DLL_STRBIN_DELAY_NUM_DEFAULT	0x16
 #define DLL_RXCLK_NO_INVERTER		1
 #define DLL_RXCLK_INVERTER		0
+#define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
+#define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
+#define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
+#define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
+
 #define DLL_LOCK_WO_TMOUT(x) \
 	((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \
 	(((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0))
-#define RK3568_MAX_CLKS 3
+#define RK35xx_MAX_CLKS 3
 
 #define BOUNDARY_OK(addr, len) \
 	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
 
-struct rk3568_priv {
+enum dwcmshc_rk_type {
+	DWCMSHC_RK3568,
+	DWCMSHC_RK3588,
+};
+
+struct rk35xx_priv {
 	/* Rockchip specified optional clocks */
-	struct clk_bulk_data rockchip_clks[RK3568_MAX_CLKS];
+	struct clk_bulk_data rockchip_clks[RK35xx_MAX_CLKS];
+	struct reset_control *reset;
+	enum dwcmshc_rk_type devtype;
 	u8 txclk_tapnum;
 };
 
@@ -131,7 +150,9 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 static void dwcmshc_set_uhs_signaling(struct sdhci_host *host,
 				      unsigned int timing)
 {
-	u16 ctrl_2;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u16 ctrl, ctrl_2;
 
 	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 	/* Select Bus Speed Mode for host */
@@ -149,8 +170,15 @@ static void dwcmshc_set_uhs_signaling(struct sdhci_host *host,
 	else if ((timing == MMC_TIMING_UHS_DDR50) ||
 		 (timing == MMC_TIMING_MMC_DDR52))
 		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
-	else if (timing == MMC_TIMING_MMC_HS400)
+	else if (timing == MMC_TIMING_MMC_HS400) {
+		/* set CARD_IS_EMMC bit to enable Data Strobe for HS400 */
+		ctrl = sdhci_readw(host, priv->vendor_specific_area1 + DWCMSHC_EMMC_CONTROL);
+		ctrl |= DWCMSHC_CARD_IS_EMMC;
+		sdhci_writew(host, ctrl, priv->vendor_specific_area1 + DWCMSHC_EMMC_CONTROL);
+
 		ctrl_2 |= DWCMSHC_CTRL_HS400;
+	}
+
 	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 }
 
@@ -176,24 +204,18 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct dwcmshc_priv *dwc_priv = sdhci_pltfm_priv(pltfm_host);
-	struct rk3568_priv *priv = dwc_priv->priv;
+	struct rk35xx_priv *priv = dwc_priv->priv;
 	u8 txclk_tapnum = DLL_TXCLK_TAPNUM_DEFAULT;
 	u32 extra, reg;
 	int err;
 
 	host->mmc->actual_clock = 0;
 
-	/*
-	 * DO NOT TOUCH THIS SETTING. RX clk inverter unit is enabled
-	 * by default, but it shouldn't be enabled. We should anyway
-	 * disable it before issuing any cmds.
-	 */
-	extra = DWCMSHC_EMMC_DLL_DLYENA |
-		DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL;
-	sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK);
-
-	if (clock == 0)
+	if (clock == 0) {
+		/* Disable interface clock at initial state. */
+		sdhci_set_clock(host, clock);
 		return;
+	}
 
 	/* Rockchip platform only support 375KHz for identify mode */
 	if (clock <= 400000)
@@ -211,9 +233,21 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	extra &= ~BIT(0);
 	sdhci_writel(host, extra, reg);
 
-	if (clock <= 400000) {
-		/* Disable DLL to reset sample clock */
+	if (clock <= 52000000) {
+		/* Disable DLL and reset both of sample and drive clock */
 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
+		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
+		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
+		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
+		/*
+		 * Before switching to hs400es mode, the driver will enable
+		 * enhanced strobe first. PHY needs to configure the parameters
+		 * of enhanced strobe first.
+		 */
+		extra = DWCMSHC_EMMC_DLL_DLYENA |
+			DLL_STRBIN_DELAY_NUM_SEL |
+			DLL_STRBIN_DELAY_NUM_DEFAULT << DLL_STRBIN_DELAY_NUM_OFFSET;
+		sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN);
 		return;
 	}
 
@@ -222,6 +256,15 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	udelay(1);
 	sdhci_writel(host, 0x0, DWCMSHC_EMMC_DLL_CTRL);
 
+	/*
+	 * We shouldn't set DLL_RXCLK_NO_INVERTER for identify mode but
+	 * we must set it in higher speed mode.
+	 */
+	extra = DWCMSHC_EMMC_DLL_DLYENA;
+	if (priv->devtype == DWCMSHC_RK3568)
+		extra |= DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL;
+	sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK);
+
 	/* Init DLL settings */
 	extra = 0x5 << DWCMSHC_EMMC_DLL_START_POINT |
 		0x2 << DWCMSHC_EMMC_DLL_INC |
@@ -244,8 +287,20 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	    host->mmc->ios.timing == MMC_TIMING_MMC_HS400)
 		txclk_tapnum = priv->txclk_tapnum;
 
+	if ((priv->devtype == DWCMSHC_RK3588) && host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+		txclk_tapnum = DLL_TXCLK_TAPNUM_90_DEGREES;
+
+		extra = DLL_CMDOUT_SRC_CLK_NEG |
+			DLL_CMDOUT_EN_SRC_CLK_NEG |
+			DWCMSHC_EMMC_DLL_DLYENA |
+			DLL_CMDOUT_TAPNUM_90_DEGREES |
+			DLL_CMDOUT_TAPNUM_FROM_SW;
+		sdhci_writel(host, extra, DECMSHC_EMMC_DLL_CMDOUT);
+	}
+
 	extra = DWCMSHC_EMMC_DLL_DLYENA |
 		DLL_TXCLK_TAPNUM_FROM_SW |
+		DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL |
 		txclk_tapnum;
 	sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_TXCLK);
 
@@ -255,6 +310,21 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN);
 }
 
+static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct dwcmshc_priv *dwc_priv = sdhci_pltfm_priv(pltfm_host);
+	struct rk35xx_priv *priv = dwc_priv->priv;
+
+	if (mask & SDHCI_RESET_ALL && priv->reset) {
+		reset_control_assert(priv->reset);
+		udelay(1);
+		reset_control_deassert(priv->reset);
+	}
+
+	sdhci_reset(host, mask);
+}
+
 static const struct sdhci_ops sdhci_dwcmshc_ops = {
 	.set_clock		= sdhci_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
@@ -264,12 +334,12 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
 	.adma_write_desc	= dwcmshc_adma_write_desc,
 };
 
-static const struct sdhci_ops sdhci_dwcmshc_rk3568_ops = {
+static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
 	.set_clock		= dwcmshc_rk3568_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
 	.set_uhs_signaling	= dwcmshc_set_uhs_signaling,
 	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
-	.reset			= sdhci_reset,
+	.reset			= rk35xx_sdhci_reset,
 	.adma_write_desc	= dwcmshc_adma_write_desc,
 };
 
@@ -279,30 +349,37 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 };
 
-static const struct sdhci_pltfm_data sdhci_dwcmshc_rk3568_pdata = {
-	.ops = &sdhci_dwcmshc_rk3568_ops,
+static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = {
+	.ops = &sdhci_dwcmshc_rk35xx_ops,
 	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
 		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
 		   SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
 };
 
-static int dwcmshc_rk3568_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
+static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
 {
 	int err;
-	struct rk3568_priv *priv = dwc_priv->priv;
+	struct rk35xx_priv *priv = dwc_priv->priv;
+
+	priv->reset = devm_reset_control_array_get_optional_exclusive(mmc_dev(host->mmc));
+	if (IS_ERR(priv->reset)) {
+		err = PTR_ERR(priv->reset);
+		dev_err(mmc_dev(host->mmc), "failed to get reset control %d\n", err);
+		return err;
+	}
 
 	priv->rockchip_clks[0].id = "axi";
 	priv->rockchip_clks[1].id = "block";
 	priv->rockchip_clks[2].id = "timer";
-	err = devm_clk_bulk_get_optional(mmc_dev(host->mmc), RK3568_MAX_CLKS,
+	err = devm_clk_bulk_get_optional(mmc_dev(host->mmc), RK35xx_MAX_CLKS,
 					 priv->rockchip_clks);
 	if (err) {
 		dev_err(mmc_dev(host->mmc), "failed to get clocks %d\n", err);
 		return err;
 	}
 
-	err = clk_bulk_prepare_enable(RK3568_MAX_CLKS, priv->rockchip_clks);
+	err = clk_bulk_prepare_enable(RK35xx_MAX_CLKS, priv->rockchip_clks);
 	if (err) {
 		dev_err(mmc_dev(host->mmc), "failed to enable clocks %d\n", err);
 		return err;
@@ -321,10 +398,28 @@ static int dwcmshc_rk3568_init(struct sdhci_host *host, struct dwcmshc_priv *dwc
 	return 0;
 }
 
+static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
+{
+	/*
+	 * Don't support highspeed bus mode with low clk speed as we
+	 * cannot use DLL for this condition.
+	 */
+	if (host->mmc->f_max <= 52000000) {
+		dev_info(mmc_dev(host->mmc), "Disabling HS200/HS400, frequency too low (%d)\n",
+			 host->mmc->f_max);
+		host->mmc->caps2 &= ~(MMC_CAP2_HS200 | MMC_CAP2_HS400);
+		host->mmc->caps &= ~(MMC_CAP_3_3V_DDR | MMC_CAP_1_8V_DDR);
+	}
+}
+
 static const struct of_device_id sdhci_dwcmshc_dt_ids[] = {
 	{
+		.compatible = "rockchip,rk3588-dwcmshc",
+		.data = &sdhci_dwcmshc_rk35xx_pdata,
+	},
+	{
 		.compatible = "rockchip,rk3568-dwcmshc",
-		.data = &sdhci_dwcmshc_rk3568_pdata,
+		.data = &sdhci_dwcmshc_rk35xx_pdata,
 	},
 	{
 		.compatible = "snps,dwcmshc-sdhci",
@@ -347,7 +442,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_host *host;
 	struct dwcmshc_priv *priv;
-	struct rk3568_priv *rk_priv = NULL;
+	struct rk35xx_priv *rk_priv = NULL;
 	const struct sdhci_pltfm_data *pltfm_data;
 	int err;
 	u32 extra;
@@ -402,33 +497,47 @@ static int dwcmshc_probe(struct platform_device *pdev)
 	host->mmc_host_ops.request = dwcmshc_request;
 	host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe;
 
-	if (pltfm_data == &sdhci_dwcmshc_rk3568_pdata) {
-		rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk3568_priv), GFP_KERNEL);
+	if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
+		rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
 		if (!rk_priv) {
 			err = -ENOMEM;
 			goto err_clk;
 		}
 
+		if (of_device_is_compatible(pdev->dev.of_node, "rockchip,rk3588-dwcmshc"))
+			rk_priv->devtype = DWCMSHC_RK3588;
+		else
+			rk_priv->devtype = DWCMSHC_RK3568;
+
 		priv->priv = rk_priv;
 
-		err = dwcmshc_rk3568_init(host, priv);
+		err = dwcmshc_rk35xx_init(host, priv);
 		if (err)
 			goto err_clk;
 	}
 
 	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
 
-	err = sdhci_add_host(host);
+	err = sdhci_setup_host(host);
 	if (err)
 		goto err_clk;
 
+	if (rk_priv)
+		dwcmshc_rk35xx_postinit(host, priv);
+
+	err = __sdhci_add_host(host);
+	if (err)
+		goto err_setup_host;
+
 	return 0;
 
+err_setup_host:
+	sdhci_cleanup_host(host);
 err_clk:
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_disable_unprepare(priv->bus_clk);
 	if (rk_priv)
-		clk_bulk_disable_unprepare(RK3568_MAX_CLKS,
+		clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
 					   rk_priv->rockchip_clks);
 free_pltfm:
 	sdhci_pltfm_free(pdev);
@@ -440,14 +549,14 @@ static int dwcmshc_remove(struct platform_device *pdev)
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
-	struct rk3568_priv *rk_priv = priv->priv;
+	struct rk35xx_priv *rk_priv = priv->priv;
 
 	sdhci_remove_host(host, 0);
 
 	clk_disable_unprepare(pltfm_host->clk);
 	clk_disable_unprepare(priv->bus_clk);
 	if (rk_priv)
-		clk_bulk_disable_unprepare(RK3568_MAX_CLKS,
+		clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
 					   rk_priv->rockchip_clks);
 	sdhci_pltfm_free(pdev);
 
@@ -460,7 +569,7 @@ static int dwcmshc_suspend(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
-	struct rk3568_priv *rk_priv = priv->priv;
+	struct rk35xx_priv *rk_priv = priv->priv;
 	int ret;
 
 	ret = sdhci_suspend_host(host);
@@ -472,7 +581,7 @@ static int dwcmshc_suspend(struct device *dev)
 		clk_disable_unprepare(priv->bus_clk);
 
 	if (rk_priv)
-		clk_bulk_disable_unprepare(RK3568_MAX_CLKS,
+		clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
 					   rk_priv->rockchip_clks);
 
 	return ret;
@@ -483,7 +592,7 @@ static int dwcmshc_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
-	struct rk3568_priv *rk_priv = priv->priv;
+	struct rk35xx_priv *rk_priv = priv->priv;
 	int ret;
 
 	ret = clk_prepare_enable(pltfm_host->clk);
@@ -497,7 +606,7 @@ static int dwcmshc_resume(struct device *dev)
 	}
 
 	if (rk_priv) {
-		ret = clk_bulk_prepare_enable(RK3568_MAX_CLKS,
+		ret = clk_bulk_prepare_enable(RK35xx_MAX_CLKS,
 					      rk_priv->rockchip_clks);
 		if (ret)
 			return ret;
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index d9dc41143bb3..e0266638381d 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -904,6 +904,7 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc,
 		scfg_node = of_find_matching_node(NULL, scfg_device_ids);
 		if (scfg_node)
 			scfg_base = of_iomap(scfg_node, 0);
+		of_node_put(scfg_node);
 		if (scfg_base) {
 			sdhciovselcr = SDHCIOVSELCR_TGLEN |
 				       SDHCIOVSELCR_VSELVAL;
@@ -1418,7 +1419,7 @@ static int esdhc_hs400_prepare_ddr(struct mmc_host *mmc)
 static int sdhci_esdhc_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
-	struct device_node *np;
+	struct device_node *np, *tp;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_esdhc *esdhc;
 	int ret;
@@ -1463,7 +1464,9 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	if (esdhc->vendor_ver > VENDOR_V_22)
 		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 
-	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
+	tp = of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc");
+	if (tp) {
+		of_node_put(tp);
 		host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 	}
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index f13c08db3da5..4d509f656188 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -95,6 +95,9 @@
 #define PCIE_GLI_9763E_SCR	 0x8E0
 #define   GLI_9763E_SCR_AXI_REQ	   BIT(9)
 
+#define PCIE_GLI_9763E_CFG       0x8A0
+#define   GLI_9763E_CFG_LPSN_DIS   BIT(12)
+
 #define PCIE_GLI_9763E_CFG2      0x8A4
 #define   GLI_9763E_CFG2_L1DLY     GENMASK(28, 19)
 #define   GLI_9763E_CFG2_L1DLY_MID 0x54
@@ -963,12 +966,40 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
 }
 
 #ifdef CONFIG_PM
+static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable)
+{
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+	value &= ~GLI_9763E_VHS_REV;
+	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
+
+	if (enable)
+		value &= ~GLI_9763E_CFG_LPSN_DIS;
+	else
+		value |= GLI_9763E_CFG_LPSN_DIS;
+
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+	value &= ~GLI_9763E_VHS_REV;
+	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+}
+
 static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip)
 {
 	struct sdhci_pci_slot *slot = chip->slots[0];
 	struct sdhci_host *host = slot->host;
 	u16 clock;
 
+	/* Enable LPM negotiation to allow entering L1 state */
+	gl9763e_set_low_power_negotiation(slot, true);
+
 	clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 	clock &= ~(SDHCI_CLOCK_PLL_EN | SDHCI_CLOCK_CARD_EN);
 	sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
@@ -1002,6 +1033,9 @@ static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip)
 	clock |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
 
+	/* Disable LPM negotiation to avoid entering L1 state. */
+	gl9763e_set_low_power_negotiation(slot, false);
+
 	return 0;
 }
 #endif
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index d41582c21aa3..6415916fbd91 100644
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -440,15 +440,14 @@ static int sdhci_st_remove(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host);
 	struct reset_control *rstc = pdata->rstc;
-	int ret;
 
-	ret = sdhci_pltfm_unregister(pdev);
+	sdhci_pltfm_unregister(pdev);
 
 	clk_disable_unprepare(pdata->icnclk);
 
 	reset_control_assert(rstc);
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 22152029e14c..7689ffec5ad1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -224,6 +224,7 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
 		if (timedout) {
 			pr_err("%s: Reset 0x%x never completed.\n",
 				mmc_hostname(host->mmc), (int)mask);
+			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
 			sdhci_dumpregs(host);
 			return;
 		}
@@ -1716,6 +1717,7 @@ static bool sdhci_send_command_retry(struct sdhci_host *host,
 		if (!timeout--) {
 			pr_err("%s: Controller never released inhibit bit(s).\n",
 			       mmc_hostname(host->mmc));
+			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
 			sdhci_dumpregs(host);
 			cmd->error = -EIO;
 			return false;
@@ -1965,6 +1967,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 		if (timedout) {
 			pr_err("%s: Internal clock never stabilised.\n",
 			       mmc_hostname(host->mmc));
+			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
 			sdhci_dumpregs(host);
 			return;
 		}
@@ -1987,6 +1990,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 			if (timedout) {
 				pr_err("%s: PLL clock never stabilised.\n",
 				       mmc_hostname(host->mmc));
+				sdhci_err_stats_inc(host, CTRL_TIMEOUT);
 				sdhci_dumpregs(host);
 				return;
 			}
@@ -3161,6 +3165,7 @@ static void sdhci_timeout_timer(struct timer_list *t)
 	if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
 		pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",
 		       mmc_hostname(host->mmc));
+		sdhci_err_stats_inc(host, REQ_TIMEOUT);
 		sdhci_dumpregs(host);
 
 		host->cmd->error = -ETIMEDOUT;
@@ -3183,6 +3188,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
 	    (host->cmd && sdhci_data_line_cmd(host->cmd))) {
 		pr_err("%s: Timeout waiting for hardware interrupt.\n",
 		       mmc_hostname(host->mmc));
+		sdhci_err_stats_inc(host, REQ_TIMEOUT);
 		sdhci_dumpregs(host);
 
 		if (host->data) {
@@ -3234,17 +3240,21 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
 			return;
 		pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",
 		       mmc_hostname(host->mmc), (unsigned)intmask);
+		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
 		sdhci_dumpregs(host);
 		return;
 	}
 
 	if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC |
 		       SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) {
-		if (intmask & SDHCI_INT_TIMEOUT)
+		if (intmask & SDHCI_INT_TIMEOUT) {
 			host->cmd->error = -ETIMEDOUT;
-		else
+			sdhci_err_stats_inc(host, CMD_TIMEOUT);
+		} else {
 			host->cmd->error = -EILSEQ;
-
+			if (!mmc_op_tuning(host->cmd->opcode))
+				sdhci_err_stats_inc(host, CMD_CRC);
+		}
 		/* Treat data command CRC error the same as data CRC error */
 		if (host->cmd->data &&
 		    (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) ==
@@ -3266,6 +3276,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
 			  -ETIMEDOUT :
 			  -EILSEQ;
 
+		sdhci_err_stats_inc(host, AUTO_CMD);
+
 		if (sdhci_auto_cmd23(host, mrq)) {
 			mrq->sbc->error = err;
 			__sdhci_finish_mrq(host, mrq);
@@ -3342,6 +3354,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
 				host->data_cmd = NULL;
 				data_cmd->error = -ETIMEDOUT;
+				sdhci_err_stats_inc(host, CMD_TIMEOUT);
 				__sdhci_finish_mrq(host, data_cmd->mrq);
 				return;
 			}
@@ -3370,23 +3383,30 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 
 		pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",
 		       mmc_hostname(host->mmc), (unsigned)intmask);
+		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
 		sdhci_dumpregs(host);
 
 		return;
 	}
 
-	if (intmask & SDHCI_INT_DATA_TIMEOUT)
+	if (intmask & SDHCI_INT_DATA_TIMEOUT) {
 		host->data->error = -ETIMEDOUT;
-	else if (intmask & SDHCI_INT_DATA_END_BIT)
+		sdhci_err_stats_inc(host, DAT_TIMEOUT);
+	} else if (intmask & SDHCI_INT_DATA_END_BIT) {
 		host->data->error = -EILSEQ;
-	else if ((intmask & SDHCI_INT_DATA_CRC) &&
+		if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
+			sdhci_err_stats_inc(host, DAT_CRC);
+	} else if ((intmask & SDHCI_INT_DATA_CRC) &&
 		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
-			!= MMC_BUS_TEST_R)
+			!= MMC_BUS_TEST_R) {
 		host->data->error = -EILSEQ;
-	else if (intmask & SDHCI_INT_ADMA_ERROR) {
+		if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
+			sdhci_err_stats_inc(host, DAT_CRC);
+	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
 		pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
 		       intmask);
 		sdhci_adma_show_error(host);
+		sdhci_err_stats_inc(host, ADMA);
 		host->data->error = -EIO;
 		if (host->ops->adma_workaround)
 			host->ops->adma_workaround(host, intmask);
@@ -3584,6 +3604,7 @@ out:
 	if (unexpected) {
 		pr_err("%s: Unexpected interrupt 0x%08x.\n",
 			   mmc_hostname(host->mmc), unexpected);
+		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
 		sdhci_dumpregs(host);
 	}
 
@@ -3905,20 +3926,27 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
 	if (!host->cqe_on)
 		return false;
 
-	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC))
+	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) {
 		*cmd_error = -EILSEQ;
-	else if (intmask & SDHCI_INT_TIMEOUT)
+		if (!mmc_op_tuning(host->cmd->opcode))
+			sdhci_err_stats_inc(host, CMD_CRC);
+	} else if (intmask & SDHCI_INT_TIMEOUT) {
 		*cmd_error = -ETIMEDOUT;
-	else
+		sdhci_err_stats_inc(host, CMD_TIMEOUT);
+	} else
 		*cmd_error = 0;
 
-	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC))
+	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) {
 		*data_error = -EILSEQ;
-	else if (intmask & SDHCI_INT_DATA_TIMEOUT)
+		if (!mmc_op_tuning(host->cmd->opcode))
+			sdhci_err_stats_inc(host, DAT_CRC);
+	} else if (intmask & SDHCI_INT_DATA_TIMEOUT) {
 		*data_error = -ETIMEDOUT;
-	else if (intmask & SDHCI_INT_ADMA_ERROR)
+		sdhci_err_stats_inc(host, DAT_TIMEOUT);
+	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
 		*data_error = -EIO;
-	else
+		sdhci_err_stats_inc(host, ADMA);
+	} else
 		*data_error = 0;
 
 	/* Clear selected interrupts. */
@@ -3934,6 +3962,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
 		sdhci_writel(host, intmask, SDHCI_INT_STATUS);
 		pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n",
 		       mmc_hostname(host->mmc), intmask);
+		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
 		sdhci_dumpregs(host);
 	}
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index d7929d725730..95a08f09df30 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -356,6 +356,9 @@ struct sdhci_adma2_64_desc {
  */
 #define MMC_CMD_TRANSFER_TIME	(10 * NSEC_PER_MSEC) /* max 10 ms */
 
+#define sdhci_err_stats_inc(host, err_name) \
+	mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
+
 enum sdhci_cookie {
 	COOKIE_UNMAPPED,
 	COOKIE_PRE_MAPPED,	/* mapped by sdhci_pre_req() */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index b55a29c53d9c..53a2ad9a24b8 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -75,7 +75,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
 	tmio_mmc_clk_start(host);
 }
 
-static void tmio_mmc_reset(struct tmio_mmc_host *host)
+static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve)
 {
 	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	usleep_range(10000, 11000);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index e754bb3f5c32..501613c74406 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -42,6 +42,7 @@
 #define CTL_DMA_ENABLE 0xd8
 #define CTL_RESET_SD 0xe0
 #define CTL_VERSION 0xe2
+#define CTL_SDIF_MODE 0xe6 /* only known on R-Car 2+ */
 
 /* Definitions for values the CTL_STOP_INTERNAL_ACTION register can take */
 #define TMIO_STOP_STP		BIT(0)
@@ -98,6 +99,9 @@
 /* Definitions for values the CTL_DMA_ENABLE register can take */
 #define DMA_ENABLE_DMASDRW	BIT(1)
 
+/* Definitions for values the CTL_SDIF_MODE register can take */
+#define SDIF_MODE_HS400		BIT(0) /* only known on R-Car 2+ */
+
 /* Define some IRQ masks */
 /* This is the mask used at reset by the chip */
 #define TMIO_MASK_ALL           0x837f031d
@@ -181,7 +185,7 @@ struct tmio_mmc_host {
 	int (*multi_io_quirk)(struct mmc_card *card,
 			      unsigned int direction, int blk_size);
 	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
-	void (*reset)(struct tmio_mmc_host *host);
+	void (*reset)(struct tmio_mmc_host *host, bool preserve);
 	bool (*check_retune)(struct tmio_mmc_host *host, struct mmc_request *mrq);
 	void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq);
 	unsigned int (*get_timeout_cycles)(struct tmio_mmc_host *host);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index a5850d83908b..437048bb8027 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -179,8 +179,17 @@ static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
 	sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg);
 }
 
-static void tmio_mmc_reset(struct tmio_mmc_host *host)
+static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve)
 {
+	u16 card_opt, clk_ctrl, sdif_mode;
+
+	if (preserve) {
+		card_opt = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT);
+		clk_ctrl = sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL);
+		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+			sdif_mode = sd_ctrl_read16(host, CTL_SDIF_MODE);
+	}
+
 	/* FIXME - should we set stop clock reg here */
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
 	usleep_range(10000, 11000);
@@ -190,7 +199,7 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
 	tmio_mmc_abort_dma(host);
 
 	if (host->reset)
-		host->reset(host);
+		host->reset(host, preserve);
 
 	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all);
 	host->sdcard_irq_mask = host->sdcard_irq_mask_all;
@@ -206,6 +215,13 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
 	}
 
+	if (preserve) {
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, card_opt);
+		sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk_ctrl);
+		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+			sd_ctrl_write16(host, CTL_SDIF_MODE, sdif_mode);
+	}
+
 	if (host->mmc->card)
 		mmc_retune_needed(host->mmc);
 }
@@ -248,7 +264,7 @@ static void tmio_mmc_reset_work(struct work_struct *work)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	tmio_mmc_reset(host);
+	tmio_mmc_reset(host, true);
 
 	/* Ready for new calls */
 	host->mrq = NULL;
@@ -961,7 +977,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		tmio_mmc_power_off(host);
 		/* For R-Car Gen2+, we need to reset SDHI specific SCC */
 		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
-			tmio_mmc_reset(host);
+			tmio_mmc_reset(host, false);
 
 		host->set_clock(host, 0);
 		break;
@@ -1189,7 +1205,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 		_host->sdcard_irq_mask_all = TMIO_MASK_ALL;
 
 	_host->set_clock(_host, 0);
-	tmio_mmc_reset(_host);
+	tmio_mmc_reset(_host, false);
 
 	spin_lock_init(&_host->lock);
 	mutex_init(&_host->ios_lock);
@@ -1285,7 +1301,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 	struct tmio_mmc_host *host = dev_get_drvdata(dev);
 
 	tmio_mmc_clk_enable(host);
-	tmio_mmc_reset(host);
+	tmio_mmc_reset(host, false);
 
 	if (host->clk_cache)
 		host->set_clock(host, host->clk_cache);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 37f975875102..8a30de08e913 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -219,7 +219,8 @@ struct sdio_cccr {
 				wide_bus:1,
 				high_power:1,
 				high_speed:1,
-				disable_cd:1;
+				disable_cd:1,
+				enable_async_irq:1;
 };
 
 struct sdio_cis {
@@ -343,10 +344,16 @@ static inline bool mmc_large_sector(struct mmc_card *card)
 	return card->ext_csd.data_sector_size == 4096;
 }
 
+static inline int mmc_card_enable_async_irq(struct mmc_card *card)
+{
+	return card->cccr.enable_async_irq;
+}
+
 bool mmc_card_is_blockaddr(struct mmc_card *card);
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
 #define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
 #define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
+#define mmc_card_sd_combo(c)	((c)->type == MMC_TYPE_SD_COMBO)
 
 #endif /* LINUX_MMC_CARD_H */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index c193c50ccd78..eb8bc5b9b0b7 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -93,6 +93,25 @@ struct mmc_clk_phase_map {
 
 struct mmc_host;
 
+enum mmc_err_stat {
+	MMC_ERR_CMD_TIMEOUT,
+	MMC_ERR_CMD_CRC,
+	MMC_ERR_DAT_TIMEOUT,
+	MMC_ERR_DAT_CRC,
+	MMC_ERR_AUTO_CMD,
+	MMC_ERR_ADMA,
+	MMC_ERR_TUNING,
+	MMC_ERR_CMDQ_RED,
+	MMC_ERR_CMDQ_GCE,
+	MMC_ERR_CMDQ_ICCE,
+	MMC_ERR_REQ_TIMEOUT,
+	MMC_ERR_CMDQ_REQ_TIMEOUT,
+	MMC_ERR_ICE_CFG,
+	MMC_ERR_CTRL_TIMEOUT,
+	MMC_ERR_UNEXPECTED_IRQ,
+	MMC_ERR_MAX,
+};
+
 struct mmc_host_ops {
 	/*
 	 * It is optional for the host to implement pre_req and post_req in
@@ -501,6 +520,7 @@ struct mmc_host {
 	/* Host Software Queue support */
 	bool			hsq_enabled;
 
+	u32			err_stats[MMC_ERR_MAX];
 	unsigned long		private[] ____cacheline_aligned;
 };
 
@@ -635,6 +655,12 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data)
 	return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 }
 
+static inline void mmc_debugfs_err_stats_inc(struct mmc_host *host,
+					     enum mmc_err_stat stat)
+{
+	host->err_stats[stat] += 1;
+}
+
 int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error);
 int mmc_send_abort_tuning(struct mmc_host *host, u32 opcode);
 int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index d9a65c6a8816..9c50bc40f8ff 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode)
 	       opcode == MMC_READ_MULTIPLE_BLOCK;
 }
 
+static inline bool mmc_op_tuning(u32 opcode)
+{
+	return opcode == MMC_SEND_TUNING_BLOCK ||
+			opcode == MMC_SEND_TUNING_BLOCK_HS200;
+}
+
 /*
  * MMC_SWITCH argument format:
  *
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 2a05d1ac4f0e..1ef400f28642 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -159,6 +159,11 @@
 #define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
 #define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
 #define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
+
+#define SDIO_CCCR_INTERRUPT_EXT	0x16
+#define SDIO_INTERRUPT_EXT_SAI	(1 << 0)
+#define SDIO_INTERRUPT_EXT_EAI	(1 << 1)
+
 /*
  * Function Basic Registers (FBR)
  */