Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-10-11 06:34:22 -0400
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-10-11 06:34:22 -0400
commit: f43b179bbd84d2106c6fb8c7f2db1bfacff19f62 (patch)
tree: 581e60846d1298276fac0b768ba12e06d7600d1e
parent: a2ce35273c2f1aa0dcddd8822681d64ee5f31852 (diff)
parent: 583f958b8a23343c904ec0790c25c96f5f82d409 (diff)
download: linux-f43b179bbd84d2106c6fb8c7f2db1bfacff19f62.tar.gz
81 files changed, 2007 insertions, 750 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 431716e37a39..b52628b18a53 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -40,6 +40,8 @@ Optional properties:
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
 - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- dsr: Value the card's (optional) Driver Stage Register (DSR) should be
+  programmed with. Valid range: [0 .. 0xffff].
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index c559f3f36309..c327c2d6f23d 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -10,12 +10,14 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be
-	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following
+	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
+							before RK3288
+	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 
 Example:
 
 	rkdwmmc0@12200000 {
-		compatible = "rockchip,rk2928-dw-mshc";
+		compatible = "rockchip,rk3288-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index fa0f327cde01..400b640fabc7 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -19,6 +19,9 @@ Required properties:
 		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
 		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
 		"renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
+		"renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC
+		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
+		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
diff --git a/MAINTAINERS b/MAINTAINERS
index 2cddff1dd439..b28dc111d4a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6616,10 +6616,9 @@ S:	Maintained
 F:	drivers/mmc/host/omap.c
 
 OMAP HS MMC SUPPORT
-M:	Balaji T K <balajitk@ti.com>
 L:	linux-mmc@vger.kernel.org
 L:	linux-omap@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/mmc/host/omap_hsmmc.c
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 70a559cf1a3d..4f2df61c1cfc 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -69,7 +69,8 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		vmmc-supply = <&ldo10_reg>;
+		vmmc-supply = <&ldo19_reg>;
+		vqmmc-supply = <&ldo13_reg>;
 		bus-width = <4>;
 		cap-sd-highspeed;
 	};
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index b7d5bc7659cd..126a8b4ec491 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -331,7 +331,6 @@ SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
 static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
@@ -344,7 +343,6 @@ static struct resource sdhi0_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
@@ -357,7 +355,6 @@ static struct resource sdhi1_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index e1d8215da0b0..f5a98e2942b3 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -630,7 +630,6 @@ static void __init lager_add_rsnd_device(void)
 static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };
@@ -644,7 +643,6 @@ static struct resource sdhi0_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index ede41f05c392..1fa4c80ff886 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -977,7 +977,7 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
 		return ERR_CONTINUE;
 
 	/* Now for stop errors.  These aren't fatal to the transfer. */
-	pr_err("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
+	pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
 	       req->rq_disk->disk_name, brq->stop.error,
 	       brq->cmd.resp[0], status);
 
@@ -1398,10 +1398,15 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 		if (disable_multi)
 			brq->data.blocks = 1;
 
-		/* Some controllers can't do multiblock reads due to hw bugs */
-		if (card->host->caps2 & MMC_CAP2_NO_MULTI_READ &&
-		    rq_data_dir(req) == READ)
-			brq->data.blocks = 1;
+		/*
+		 * Some controllers have HW issues while operating
+		 * in multiple I/O mode
+		 */
+		if (card->host->ops->multi_io_quirk)
+			brq->data.blocks = card->host->ops->multi_io_quirk(card,
+						(rq_data_dir(req) == READ) ?
+						MMC_DATA_READ : MMC_DATA_WRITE,
+						brq->data.blocks);
 	}
 
 	if (brq->data.blocks > 1 || do_rel_wr) {
@@ -1923,8 +1928,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		case MMC_BLK_ECC_ERR:
 			if (brq->data.blocks > 1) {
 				/* Redo read one sector at a time */
-				pr_warning("%s: retrying using single block read\n",
-					   req->rq_disk->disk_name);
+				pr_warn("%s: retrying using single block read\n",
+					req->rq_disk->disk_name);
 				disable_multi = 1;
 				break;
 			}
@@ -2131,7 +2136,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	md->disk->queue = md->queue.queue;
 	md->disk->driverfs_dev = parent;
 	set_disk_ro(md->disk, md->read_only || default_ro);
-	if (area_type & MMC_BLK_DATA_AREA_RPMB)
+	if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT))
 		md->disk->flags |= GENHD_FL_NO_PART_SCAN;
 
 	/*
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 3e049c13429c..feea926e32f8 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -229,14 +229,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 		if (bouncesz > 512) {
 			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
 			if (!mqrq_cur->bounce_buf) {
-				pr_warning("%s: unable to "
-					"allocate bounce cur buffer\n",
+				pr_warn("%s: unable to allocate bounce cur buffer\n",
 					mmc_card_name(card));
 			}
 			mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
 			if (!mqrq_prev->bounce_buf) {
-				pr_warning("%s: unable to "
-					"allocate bounce prev buffer\n",
+				pr_warn("%s: unable to allocate bounce prev buffer\n",
 					mmc_card_name(card));
 				kfree(mqrq_cur->bounce_buf);
 				mqrq_cur->bounce_buf = NULL;
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index f093cea0d060..d2de5925b73e 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -1063,8 +1063,8 @@ static int sdio_uart_probe(struct sdio_func *func,
 		return -ENOMEM;
 
 	if (func->class == SDIO_CLASS_UART) {
-		pr_warning("%s: need info on UART class basic setup\n",
-		       sdio_func_id(func));
+		pr_warn("%s: need info on UART class basic setup\n",
+			sdio_func_id(func));
 		kfree(port);
 		return -ENOSYS;
 	} else if (func->class == SDIO_CLASS_GPS) {
@@ -1082,9 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func,
 				break;
 		}
 		if (!tpl) {
-			pr_warning(
-       "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
-			       sdio_func_id(func));
+			pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+				sdio_func_id(func));
 			kfree(port);
 			return -EINVAL;
 		}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d03a080fb9cd..f26a5f1d926d 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -433,8 +433,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
 		 */
 		if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
 			if (!mmc_interrupt_hpi(host->card)) {
-				pr_warning("%s: %s: Interrupted sanitize\n",
-					   mmc_hostname(host), __func__);
+				pr_warn("%s: %s: Interrupted sanitize\n",
+					mmc_hostname(host), __func__);
 				cmd->error = 0;
 				break;
 			} else {
@@ -995,7 +995,7 @@ void mmc_set_chip_select(struct mmc_host *host, int mode)
  */
 static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
 {
-	WARN_ON(hz < host->f_min);
+	WARN_ON(hz && hz < host->f_min);
 
 	if (hz > host->f_max)
 		hz = host->f_max;
@@ -1221,15 +1221,14 @@ int mmc_regulator_get_ocrmask(struct regulator *supply)
 	int			result = 0;
 	int			count;
 	int			i;
+	int			vdd_uV;
+	int			vdd_mV;
 
 	count = regulator_count_voltages(supply);
 	if (count < 0)
 		return count;
 
 	for (i = 0; i < count; i++) {
-		int		vdd_uV;
-		int		vdd_mV;
-
 		vdd_uV = regulator_list_voltage(supply, i);
 		if (vdd_uV <= 0)
 			continue;
@@ -1238,6 +1237,15 @@ int mmc_regulator_get_ocrmask(struct regulator *supply)
 		result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
 	}
 
+	if (!result) {
+		vdd_uV = regulator_get_voltage(supply);
+		if (vdd_uV <= 0)
+			return vdd_uV;
+
+		vdd_mV = vdd_uV / 1000;
+		result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
+	}
+
 	return result;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
@@ -1263,7 +1271,6 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 
 	if (vdd_bit) {
 		int		tmp;
-		int		voltage;
 
 		/*
 		 * REVISIT mmc_vddrange_to_ocrmask() may have set some
@@ -1280,22 +1287,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			max_uV = min_uV + 100 * 1000;
 		}
 
-		/*
-		 * If we're using a fixed/static regulator, don't call
-		 * regulator_set_voltage; it would fail.
-		 */
-		voltage = regulator_get_voltage(supply);
-
-		if (!regulator_can_change_voltage(supply))
-			min_uV = max_uV = voltage;
-
-		if (voltage < 0)
-			result = voltage;
-		else if (voltage < min_uV || voltage > max_uV)
-			result = regulator_set_voltage(supply, min_uV, max_uV);
-		else
-			result = 0;
-
+		result = regulator_set_voltage(supply, min_uV, max_uV);
 		if (result == 0 && !mmc->regulator_enabled) {
 			result = regulator_enable(supply);
 			if (!result)
@@ -1425,8 +1417,8 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
 	if (!host->ops->start_signal_voltage_switch)
 		return -EPERM;
 	if (!host->ops->card_busy)
-		pr_warning("%s: cannot verify signal voltage switch\n",
-				mmc_hostname(host));
+		pr_warn("%s: cannot verify signal voltage switch\n",
+			mmc_hostname(host));
 
 	cmd.opcode = SD_SWITCH_VOLTAGE;
 	cmd.arg = 0;
@@ -1761,7 +1753,7 @@ void mmc_init_erase(struct mmc_card *card)
 		card->erase_shift = ffs(card->ssr.au) - 1;
 	} else if (card->ext_csd.hc_erase_size) {
 		card->pref_erase = card->ext_csd.hc_erase_size;
-	} else {
+	} else if (card->erase_size) {
 		sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
 		if (sz < 128)
 			card->pref_erase = 512 * 1024 / 512;
@@ -1778,7 +1770,8 @@ void mmc_init_erase(struct mmc_card *card)
 			if (sz)
 				card->pref_erase += card->erase_size - sz;
 		}
-	}
+	} else
+		card->pref_erase = 0;
 }
 
 static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
@@ -2489,6 +2482,7 @@ void mmc_start_host(struct mmc_host *host)
 {
 	host->f_init = max(freqs[0], host->f_min);
 	host->rescan_disable = 0;
+	host->ios.power_mode = MMC_POWER_UNDEFINED;
 	if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
 		mmc_power_off(host);
 	else
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 95cceae96944..03c53b72a2d6 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -310,9 +310,8 @@ int mmc_of_parse(struct mmc_host *host)
 {
 	struct device_node *np;
 	u32 bus_width;
-	bool explicit_inv_wp, gpio_inv_wp = false;
-	enum of_gpio_flags flags;
-	int len, ret, gpio;
+	int len, ret;
+	bool cap_invert, gpio_invert;
 
 	if (!host->parent || !host->parent->of_node)
 		return 0;
@@ -360,59 +359,62 @@ int mmc_of_parse(struct mmc_host *host)
 	if (of_find_property(np, "non-removable", &len)) {
 		host->caps |= MMC_CAP_NONREMOVABLE;
 	} else {
-		bool explicit_inv_cd, gpio_inv_cd = false;
-
-		explicit_inv_cd = of_property_read_bool(np, "cd-inverted");
+		if (of_property_read_bool(np, "cd-inverted"))
+			cap_invert = true;
+		else
+			cap_invert = false;
 
 		if (of_find_property(np, "broken-cd", &len))
 			host->caps |= MMC_CAP_NEEDS_POLL;
 
-		gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags);
-		if (gpio == -EPROBE_DEFER)
-			return gpio;
-		if (gpio_is_valid(gpio)) {
-			if (!(flags & OF_GPIO_ACTIVE_LOW))
-				gpio_inv_cd = true;
-
-			ret = mmc_gpio_request_cd(host, gpio, 0);
-			if (ret < 0) {
-				dev_err(host->parent,
-					"Failed to request CD GPIO #%d: %d!\n",
-					gpio, ret);
+		ret = mmc_gpiod_request_cd(host, "cd", 0, true,
+					   0, &gpio_invert);
+		if (ret) {
+			if (ret == -EPROBE_DEFER)
 				return ret;
-			} else {
-				dev_info(host->parent, "Got CD GPIO #%d.\n",
-					 gpio);
+			if (ret != -ENOENT) {
+				dev_err(host->parent,
+					"Failed to request CD GPIO: %d\n",
+					ret);
 			}
-		}
-
-		if (explicit_inv_cd ^ gpio_inv_cd)
+		} else
+			dev_info(host->parent, "Got CD GPIO\n");
+
+		/*
+		 * There are two ways to flag that the CD line is inverted:
+		 * through the cd-inverted flag and by the GPIO line itself
+		 * being inverted from the GPIO subsystem. This is a leftover
+		 * from the times when the GPIO subsystem did not make it
+		 * possible to flag a line as inverted.
+		 *
+		 * If the capability on the host AND the GPIO line are
+		 * both inverted, the end result is that the CD line is
+		 * not inverted.
+		 */
+		if (cap_invert ^ gpio_invert)
 			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
 	}
 
 	/* Parse Write Protection */
-	explicit_inv_wp = of_property_read_bool(np, "wp-inverted");
-
-	gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
-	if (gpio == -EPROBE_DEFER) {
-		ret = -EPROBE_DEFER;
-		goto out;
-	}
-	if (gpio_is_valid(gpio)) {
-		if (!(flags & OF_GPIO_ACTIVE_LOW))
-			gpio_inv_wp = true;
+	if (of_property_read_bool(np, "wp-inverted"))
+		cap_invert = true;
+	else
+		cap_invert = false;
 
-		ret = mmc_gpio_request_ro(host, gpio);
-		if (ret < 0) {
-			dev_err(host->parent,
-				"Failed to request WP GPIO: %d!\n", ret);
+	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
 			goto out;
-		} else {
-				dev_info(host->parent, "Got WP GPIO #%d.\n",
-					 gpio);
+		if (ret != -ENOENT) {
+			dev_err(host->parent,
+				"Failed to request WP GPIO: %d\n",
+				ret);
 		}
-	}
-	if (explicit_inv_wp ^ gpio_inv_wp)
+	} else
+		dev_info(host->parent, "Got WP GPIO\n");
+
+	/* See the comment on CD inversion above */
+	if (cap_invert ^ gpio_invert)
 		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 
 	if (of_find_property(np, "cap-sd-highspeed", &len))
@@ -452,6 +454,14 @@ int mmc_of_parse(struct mmc_host *host)
 	if (of_find_property(np, "mmc-hs400-1_2v", &len))
 		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
 
+	host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
+	if (host->dsr_req && (host->dsr & ~0xffff)) {
+		dev_err(host->parent,
+			"device tree specified broken value for DSR: 0x%x, ignoring\n",
+			host->dsr);
+		host->dsr_req = 0;
+	}
+
 	return 0;
 
 out:
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1eda8dd8c867..a301a78a2bd1 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -162,6 +162,7 @@ static int mmc_decode_csd(struct mmc_card *card)
 	csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 	csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 	csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+	csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1);
 	csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 	csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 	csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
@@ -225,9 +226,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
 				"Card will be ignored.\n",
 				mmc_hostname(card->host));
 		} else {
-			pr_warning("%s: unable to read "
-				"EXT_CSD, performance might "
-				"suffer.\n",
+			pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
 				mmc_hostname(card->host));
 			err = 0;
 		}
@@ -298,6 +297,97 @@ static void mmc_select_card_type(struct mmc_card *card)
 	card->mmc_avail_type = avail_type;
 }
 
+static void mmc_manage_enhanced_area(struct mmc_card *card, u8 *ext_csd)
+{
+	u8 hc_erase_grp_sz, hc_wp_grp_sz;
+
+	/*
+	 * Disable these attributes by default
+	 */
+	card->ext_csd.enhanced_area_offset = -EINVAL;
+	card->ext_csd.enhanced_area_size = -EINVAL;
+
+	/*
+	 * Enhanced area feature support -- check whether the eMMC
+	 * card has the Enhanced area enabled.  If so, export enhanced
+	 * area offset and size to user by adding sysfs interface.
+	 */
+	if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
+	    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
+		if (card->ext_csd.partition_setting_completed) {
+			hc_erase_grp_sz =
+				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+			hc_wp_grp_sz =
+				ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+
+			/*
+			 * calculate the enhanced data area offset, in bytes
+			 */
+			card->ext_csd.enhanced_area_offset =
+				(ext_csd[139] << 24) + (ext_csd[138] << 16) +
+				(ext_csd[137] << 8) + ext_csd[136];
+			if (mmc_card_blockaddr(card))
+				card->ext_csd.enhanced_area_offset <<= 9;
+			/*
+			 * calculate the enhanced data area size, in kilobytes
+			 */
+			card->ext_csd.enhanced_area_size =
+				(ext_csd[142] << 16) + (ext_csd[141] << 8) +
+				ext_csd[140];
+			card->ext_csd.enhanced_area_size *=
+				(size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
+			card->ext_csd.enhanced_area_size <<= 9;
+		} else {
+			pr_warn("%s: defines enhanced area without partition setting complete\n",
+				mmc_hostname(card->host));
+		}
+	}
+}
+
+static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd)
+{
+	int idx;
+	u8 hc_erase_grp_sz, hc_wp_grp_sz;
+	unsigned int part_size;
+
+	/*
+	 * General purpose partition feature support --
+	 * If ext_csd has the size of general purpose partitions,
+	 * set size, part_cfg, partition name in mmc_part.
+	 */
+	if (ext_csd[EXT_CSD_PARTITION_SUPPORT] &
+	    EXT_CSD_PART_SUPPORT_PART_EN) {
+		hc_erase_grp_sz =
+			ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+		hc_wp_grp_sz =
+			ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+
+		for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) {
+			if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] &&
+			    !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] &&
+			    !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2])
+				continue;
+			if (card->ext_csd.partition_setting_completed == 0) {
+				pr_warn("%s: has partition size defined without partition complete\n",
+					mmc_hostname(card->host));
+				break;
+			}
+			part_size =
+				(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]
+				<< 16) +
+				(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1]
+				<< 8) +
+				ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3];
+			part_size *= (size_t)(hc_erase_grp_sz *
+				hc_wp_grp_sz);
+			mmc_part_add(card, part_size << 19,
+				EXT_CSD_PART_CONFIG_ACC_GP0 + idx,
+				"gp%d", idx, false,
+				MMC_BLK_DATA_AREA_GP);
+		}
+	}
+}
+
 /*
  * Decode extended CSD.
  */
@@ -305,7 +395,6 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 {
 	int err = 0, idx;
 	unsigned int part_size;
-	u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0;
 
 	BUG_ON(!card);
 
@@ -402,80 +491,16 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		ext_csd[EXT_CSD_TRIM_MULT];
 	card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 	if (card->ext_csd.rev >= 4) {
-		/*
-		 * Enhanced area feature support -- check whether the eMMC
-		 * card has the Enhanced area enabled.  If so, export enhanced
-		 * area offset and size to user by adding sysfs interface.
-		 */
-		if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
-		    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
-			hc_erase_grp_sz =
-				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
-			hc_wp_grp_sz =
-				ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+		if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED] &
+		    EXT_CSD_PART_SETTING_COMPLETED)
+			card->ext_csd.partition_setting_completed = 1;
+		else
+			card->ext_csd.partition_setting_completed = 0;
 
-			card->ext_csd.enhanced_area_en = 1;
-			/*
-			 * calculate the enhanced data area offset, in bytes
-			 */
-			card->ext_csd.enhanced_area_offset =
-				(ext_csd[139] << 24) + (ext_csd[138] << 16) +
-				(ext_csd[137] << 8) + ext_csd[136];
-			if (mmc_card_blockaddr(card))
-				card->ext_csd.enhanced_area_offset <<= 9;
-			/*
-			 * calculate the enhanced data area size, in kilobytes
-			 */
-			card->ext_csd.enhanced_area_size =
-				(ext_csd[142] << 16) + (ext_csd[141] << 8) +
-				ext_csd[140];
-			card->ext_csd.enhanced_area_size *=
-				(size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
-			card->ext_csd.enhanced_area_size <<= 9;
-		} else {
-			/*
-			 * If the enhanced area is not enabled, disable these
-			 * device attributes.
-			 */
-			card->ext_csd.enhanced_area_offset = -EINVAL;
-			card->ext_csd.enhanced_area_size = -EINVAL;
-		}
+		mmc_manage_enhanced_area(card, ext_csd);
 
-		/*
-		 * General purpose partition feature support --
-		 * If ext_csd has the size of general purpose partitions,
-		 * set size, part_cfg, partition name in mmc_part.
-		 */
-		if (ext_csd[EXT_CSD_PARTITION_SUPPORT] &
-			EXT_CSD_PART_SUPPORT_PART_EN) {
-			if (card->ext_csd.enhanced_area_en != 1) {
-				hc_erase_grp_sz =
-					ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
-				hc_wp_grp_sz =
-					ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
-
-				card->ext_csd.enhanced_area_en = 1;
-			}
+		mmc_manage_gp_partitions(card, ext_csd);
 
-			for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) {
-				if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] &&
-				!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] &&
-				!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2])
-					continue;
-				part_size =
-				(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]
-					<< 16) +
-				(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1]
-					<< 8) +
-				ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3];
-				part_size *= (size_t)(hc_erase_grp_sz *
-					hc_wp_grp_sz);
-				mmc_part_add(card, part_size << 19,
-					EXT_CSD_PART_CONFIG_ACC_GP0 + idx,
-					"gp%d", idx, false,
-					MMC_BLK_DATA_AREA_GP);
-			}
-		}
 		card->ext_csd.sec_trim_mult =
 			ext_csd[EXT_CSD_SEC_TRIM_MULT];
 		card->ext_csd.sec_erase_mult =
@@ -789,8 +814,8 @@ static int __mmc_select_powerclass(struct mmc_card *card,
 				ext_csd->raw_pwr_cl_200_360;
 		break;
 	default:
-		pr_warning("%s: Voltage range not supported "
-			   "for power class.\n", mmc_hostname(host));
+		pr_warn("%s: Voltage range not supported for power class\n",
+			mmc_hostname(host));
 		return -EINVAL;
 	}
 
@@ -987,19 +1012,35 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
 	 * 1.8V vccq at 3.3V core voltage (vcc) is not required
 	 * in the JEDEC spec for DDR.
 	 *
-	 * Do not force change in vccq since we are obviously
-	 * working and no change to vccq is needed.
+	 * Even (e)MMC card can support 3.3v to 1.2v vccq, but not all
+	 * host controller can support this, like some of the SDHCI
+	 * controller which connect to an eMMC device. Some of these
+	 * host controller still needs to use 1.8v vccq for supporting
+	 * DDR mode.
+	 *
+	 * So the sequence will be:
+	 * if (host and device can both support 1.2v IO)
+	 *	use 1.2v IO;
+	 * else if (host and device can both support 1.8v IO)
+	 *	use 1.8v IO;
+	 * so if host and device can only support 3.3v IO, this is the
+	 * last choice.
 	 *
 	 * WARNING: eMMC rules are NOT the same as SD DDR
 	 */
-	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
-		err = __mmc_set_signal_voltage(host,
-				MMC_SIGNAL_VOLTAGE_120);
-		if (err)
-			return err;
-	}
+	err = -EINVAL;
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+
+	if (err && (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V))
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
 
-	mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
+	/* make sure vccq is 3.3v after switching disaster */
+	if (err)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+
+	if (!err)
+		mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
 
 	return err;
 }
@@ -1134,6 +1175,38 @@ bus_speed:
 	return err;
 }
 
+const u8 tuning_blk_pattern_4bit[MMC_TUNING_BLK_PATTERN_4BIT_SIZE] = {
+	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
+	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
+	0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
+	0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
+	0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
+	0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
+	0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
+	0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
+};
+EXPORT_SYMBOL(tuning_blk_pattern_4bit);
+
+const u8 tuning_blk_pattern_8bit[MMC_TUNING_BLK_PATTERN_8BIT_SIZE] = {
+	0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
+	0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
+	0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
+	0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
+	0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
+	0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
+	0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
+	0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
+	0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
+	0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
+	0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
+	0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
+	0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
+	0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
+	0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
+	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
+};
+EXPORT_SYMBOL(tuning_blk_pattern_8bit);
+
 /*
  * Execute tuning sequence to seek the proper bus operating
  * conditions for HS200 and HS400, which sends CMD21 to the device.
@@ -1272,6 +1345,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * handling only for cards supporting DSR and hosts requesting
+	 * DSR configuration
+	 */
+	if (card->csd.dsr_imp && host->dsr_req)
+		mmc_set_dsr(host);
+
+	/*
 	 * Select card, as all following commands rely on that.
 	 */
 	if (!mmc_host_is_spi(host)) {
@@ -1308,7 +1388,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
 	 * bit.  This bit will be lost every time after a reset or power off.
 	 */
-	if (card->ext_csd.enhanced_area_en ||
+	if (card->ext_csd.partition_setting_completed ||
 	    (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				 EXT_CSD_ERASE_GROUP_DEF, 1,
@@ -1408,8 +1488,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		if (err && err != -EBADMSG)
 			goto free_card;
 		if (err) {
-			pr_warning("%s: Enabling HPI failed\n",
-				   mmc_hostname(card->host));
+			pr_warn("%s: Enabling HPI failed\n",
+				mmc_hostname(card->host));
 			err = 0;
 		} else
 			card->ext_csd.hpi_en = 1;
@@ -1430,9 +1510,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		 * Only if no error, cache is turned on successfully.
 		 */
 		if (err) {
-			pr_warning("%s: Cache is supported, "
-					"but failed to turn on (%d)\n",
-					mmc_hostname(card->host), err);
+			pr_warn("%s: Cache is supported, but failed to turn on (%d)\n",
+				mmc_hostname(card->host), err);
 			card->ext_csd.cache_ctrl = 0;
 			err = 0;
 		} else {
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index f51b5ba3bbea..7911e0510a1d 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -93,6 +93,26 @@ int mmc_deselect_cards(struct mmc_host *host)
 	return _mmc_select_card(host, NULL);
 }
 
+/*
+ * Write the value specified in the device tree or board code into the optional
+ * 16 bit Driver Stage Register. This can be used to tune raise/fall times and
+ * drive strength of the DAT and CMD outputs. The actual meaning of a given
+ * value is hardware dependant.
+ * The presence of the DSR register can be determined from the CSD register,
+ * bit 76.
+ */
+int mmc_set_dsr(struct mmc_host *host)
+{
+	struct mmc_command cmd = {0};
+
+	cmd.opcode = MMC_SET_DSR;
+
+	cmd.arg = (host->dsr << 16) | 0xffff;
+	cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
+
+	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+}
+
 int mmc_go_idle(struct mmc_host *host)
 {
 	int err;
@@ -629,8 +649,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 	int err;
 
 	if (!card->ext_csd.hpi) {
-		pr_warning("%s: Card didn't support HPI command\n",
-			   mmc_hostname(card->host));
+		pr_warn("%s: Card didn't support HPI command\n",
+			mmc_hostname(card->host));
 		return -EINVAL;
 	}
 
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 80ae9f4e0293..390dac665b2a 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -14,6 +14,7 @@
 
 int mmc_select_card(struct mmc_card *card);
 int mmc_deselect_cards(struct mmc_host *host);
+int mmc_set_dsr(struct mmc_host *host);
 int mmc_go_idle(struct mmc_host *host);
 int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
 int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 0c44510bf717..d90a6de7901d 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -127,6 +127,7 @@ static int mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1);
 		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
@@ -228,8 +229,8 @@ static int mmc_read_ssr(struct mmc_card *card)
 	u32 *ssr;
 
 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
-		pr_warning("%s: card lacks mandatory SD Status "
-			"function.\n", mmc_hostname(card->host));
+		pr_warn("%s: card lacks mandatory SD Status function\n",
+			mmc_hostname(card->host));
 		return 0;
 	}
 
@@ -239,8 +240,8 @@ static int mmc_read_ssr(struct mmc_card *card)
 
 	err = mmc_app_sd_status(card, ssr);
 	if (err) {
-		pr_warning("%s: problem reading SD Status "
-			"register.\n", mmc_hostname(card->host));
+		pr_warn("%s: problem reading SD Status register\n",
+			mmc_hostname(card->host));
 		err = 0;
 		goto out;
 	}
@@ -264,8 +265,8 @@ static int mmc_read_ssr(struct mmc_card *card)
 				card->ssr.erase_offset = eo * 1000;
 			}
 		} else {
-			pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
-				   mmc_hostname(card->host));
+			pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
+				mmc_hostname(card->host));
 		}
 	}
 out:
@@ -285,8 +286,7 @@ static int mmc_read_switch(struct mmc_card *card)
 		return 0;
 
 	if (!(card->csd.cmdclass & CCC_SWITCH)) {
-		pr_warning("%s: card lacks mandatory switch "
-			"function, performance might suffer.\n",
+		pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
 			mmc_hostname(card->host));
 		return 0;
 	}
@@ -315,7 +315,7 @@ static int mmc_read_switch(struct mmc_card *card)
 		if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
 			goto out;
 
-		pr_warning("%s: problem reading Bus Speed modes.\n",
+		pr_warn("%s: problem reading Bus Speed modes\n",
 			mmc_hostname(card->host));
 		err = 0;
 
@@ -371,8 +371,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
 		goto out;
 
 	if ((status[16] & 0xF) != 1) {
-		pr_warning("%s: Problem switching card "
-			"into high-speed mode!\n",
+		pr_warn("%s: Problem switching card into high-speed mode!\n",
 			mmc_hostname(card->host));
 		err = 0;
 	} else {
@@ -439,7 +438,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
 		return err;
 
 	if ((status[15] & 0xF) != drive_strength) {
-		pr_warning("%s: Problem setting drive strength!\n",
+		pr_warn("%s: Problem setting drive strength!\n",
 			mmc_hostname(card->host));
 		return 0;
 	}
@@ -517,7 +516,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
 		return err;
 
 	if ((status[16] & 0xF) != card->sd_bus_speed)
-		pr_warning("%s: Problem setting bus speed mode!\n",
+		pr_warn("%s: Problem setting bus speed mode!\n",
 			mmc_hostname(card->host));
 	else {
 		mmc_set_timing(card->host, timing);
@@ -597,7 +596,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
 			return err;
 
 		if (((status[15] >> 4) & 0x0F) != current_limit)
-			pr_warning("%s: Problem setting current limit!\n",
+			pr_warn("%s: Problem setting current limit!\n",
 				mmc_hostname(card->host));
 
 	}
@@ -726,8 +725,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 try_again:
 	if (!retries) {
 		ocr &= ~SD_OCR_S18R;
-		pr_warning("%s: Skipping voltage switch\n",
-			mmc_hostname(host));
+		pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
 	}
 
 	/*
@@ -871,9 +869,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 		}
 
 		if (ro < 0) {
-			pr_warning("%s: host does not "
-				"support reading read-only "
-				"switch. assuming write-enable.\n",
+			pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n",
 				mmc_hostname(host));
 		} else if (ro > 0) {
 			mmc_card_set_readonly(card);
@@ -954,6 +950,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
+	 * handling only for cards supporting DSR and hosts requesting
+	 * DSR configuration
+	 */
+	if (card->csd.dsr_imp && host->dsr_req)
+		mmc_set_dsr(host);
+
+	/*
 	 * Select card, as all following commands rely on that.
 	 */
 	if (!mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index e636d9e99e4a..2439e717655b 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -216,8 +216,8 @@ static int sdio_enable_wide(struct mmc_card *card)
 		return ret;
 
 	if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
-		pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
-			   mmc_hostname(card->host), ctrl);
+		pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+			mmc_hostname(card->host), ctrl);
 
 	/* set as 4-bit bus width */
 	ctrl &= ~SDIO_BUS_WIDTH_MASK;
@@ -605,8 +605,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 
 try_again:
 	if (!retries) {
-		pr_warning("%s: Skipping voltage switch\n",
-				mmc_hostname(host));
+		pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
 		ocr &= ~R4_18V_PRESENT;
 	}
 
@@ -992,8 +991,16 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		}
 	}
 
-	if (!err && host->sdio_irqs)
-		wake_up_process(host->sdio_irq_thread);
+	if (!err && host->sdio_irqs) {
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			wake_up_process(host->sdio_irq_thread);
+		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
+		}
+	}
+
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 65cf7a7e05ea..6da97b170563 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -178,8 +178,8 @@ static int sdio_bus_remove(struct device *dev)
 	drv->remove(func);
 
 	if (func->irq_handler) {
-		pr_warning("WARNING: driver %s did not remove "
-			"its interrupt handler!\n", drv->name);
+		pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",
+			drv->name);
 		sdio_claim_host(func);
 		sdio_release_irq(func);
 		sdio_release_host(func);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 5cc13c8d35bb..09cc67d028f0 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -69,16 +69,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 		if (pending & (1 << i)) {
 			func = card->sdio_func[i - 1];
 			if (!func) {
-				pr_warning("%s: pending IRQ for "
-					"non-existent function\n",
+				pr_warn("%s: pending IRQ for non-existent function\n",
 					mmc_card_id(card));
 				ret = -EINVAL;
 			} else if (func->irq_handler) {
 				func->irq_handler(func);
 				count++;
 			} else {
-				pr_warning("%s: pending IRQ with no handler\n",
-				       sdio_func_id(func));
+				pr_warn("%s: pending IRQ with no handler\n",
+					sdio_func_id(func));
 				ret = -EINVAL;
 			}
 		}
@@ -208,7 +207,7 @@ static int sdio_card_irq_get(struct mmc_card *card)
 				host->sdio_irqs--;
 				return err;
 			}
-		} else {
+		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
 			mmc_host_clk_hold(host);
 			host->ops->enable_sdio_irq(host, 1);
 			mmc_host_clk_release(host);
@@ -229,7 +228,7 @@ static int sdio_card_irq_put(struct mmc_card *card)
 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
 			atomic_set(&host->sdio_irq_thread_abort, 1);
 			kthread_stop(host->sdio_irq_thread);
-		} else {
+		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
 			mmc_host_clk_hold(host);
 			host->ops->enable_sdio_irq(host, 0);
 			mmc_host_clk_release(host);
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 5f89cb83d5f0..69bbf2adb329 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -221,8 +221,6 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 	ctx->override_cd_active_level = true;
 	ctx->cd_gpio = gpio_to_desc(gpio);
 
-	mmc_gpiod_request_cd_irq(host);
-
 	return 0;
 }
 EXPORT_SYMBOL(mmc_gpio_request_cd);
@@ -283,6 +281,8 @@ EXPORT_SYMBOL(mmc_gpio_free_cd);
  * @idx: index of the GPIO to obtain in the consumer
  * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
  * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not, set
+ * to NULL to ignore
  *
  * Use this function in place of mmc_gpio_request_cd() to use the GPIO
  * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
@@ -293,7 +293,7 @@ EXPORT_SYMBOL(mmc_gpio_free_cd);
  */
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce)
+			 unsigned int debounce, bool *gpio_invert)
 {
 	struct mmc_gpio *ctx;
 	struct gpio_desc *desc;
@@ -308,20 +308,19 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 	if (!con_id)
 		con_id = ctx->cd_label;
 
-	desc = devm_gpiod_get_index(host->parent, con_id, idx);
+	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);
 
-	ret = gpiod_direction_input(desc);
-	if (ret < 0)
-		return ret;
-
 	if (debounce) {
 		ret = gpiod_set_debounce(desc, debounce);
 		if (ret < 0)
 			return ret;
 	}
 
+	if (gpio_invert)
+		*gpio_invert = !gpiod_is_active_low(desc);
+
 	ctx->override_cd_active_level = override_active_level;
 	ctx->cd_gpio = desc;
 
@@ -330,6 +329,59 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 EXPORT_SYMBOL(mmc_gpiod_request_cd);
 
 /**
+ * mmc_gpiod_request_ro - request a gpio descriptor for write protection
+ * @host: mmc host
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
+ * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not,
+ * set to NULL to ignore
+ *
+ * Use this function in place of mmc_gpio_request_ro() to use the GPIO
+ * descriptor API.  Note that it is paired with mmc_gpiod_free_ro() not
+ * mmc_gpio_free_ro().
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert)
+{
+	struct mmc_gpio *ctx;
+	struct gpio_desc *desc;
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	if (!con_id)
+		con_id = ctx->ro_label;
+
+	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (debounce) {
+		ret = gpiod_set_debounce(desc, debounce);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (gpio_invert)
+		*gpio_invert = !gpiod_is_active_low(desc);
+
+	ctx->override_ro_active_level = override_active_level;
+	ctx->ro_gpio = desc;
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_ro);
+
+/**
  * mmc_gpiod_free_cd - free the card-detection gpio descriptor
  * @host: mmc host
  *
@@ -348,7 +400,7 @@ void mmc_gpiod_free_cd(struct mmc_host *host)
 		host->slot.cd_irq = -EINVAL;
 	}
 
-	devm_gpiod_put(&host->class_dev, ctx->cd_gpio);
+	devm_gpiod_put(host->parent, ctx->cd_gpio);
 
 	ctx->cd_gpio = NULL;
 }
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 451135822464..13860656104b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -14,6 +14,17 @@ config MMC_ARMMMCI
 
 	  If unsure, say N.
 
+config MMC_QCOM_DML
+	tristate "Qualcomm Data Mover for SD Card Controller"
+	depends on MMC_ARMMMCI && QCOM_BAM_DMA
+	default y
+	help
+	  This selects the Qualcomm Data Mover lite/local on SD Card controller.
+	  This option will enable the dma to work correctly, if you are using
+	  Qcom SOCs and MMC, you would probably need this option to get DMA working.
+
+	  if unsure, say N.
+
 config MMC_PXA
 	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
 	depends on ARCH_PXA
@@ -568,7 +579,8 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
 
 config MMC_DW
 	tristate "Synopsys DesignWare Memory Card Interface"
-	depends on ARC || ARM
+	depends on HAS_DMA
+	depends on ARC || ARM || MIPS || COMPILE_TEST
 	help
 	  This selects support for the Synopsys DesignWare Mobile Storage IP
 	  block, this provides host support for SD and MMC interfaces, in both
@@ -626,6 +638,15 @@ config MMC_DW_PCI
 
 	  If unsure, say N.
 
+config MMC_DW_ROCKCHIP
+	tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW && ARCH_ROCKCHIP
+	select MMC_DW_PLTFM
+	help
+	  This selects support for Rockchip SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on RK3066, RK3188 and RK3288 SoC's.
+
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
 	depends on MMC_BLOCK && HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f211eede8db5..b09ecfb88269 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
+obj-$(CONFIG_MMC_QCOM_DML)	+= mmci_qcom_dml.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
@@ -45,6 +46,7 @@ obj-$(CONFIG_MMC_DW_PLTFM)	+= dw_mmc-pltfm.o
 obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
 obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
+obj-$(CONFIG_MMC_DW_ROCKCHIP)	+= dw_mmc-rockchip.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index bb585d940901..77250d4b1979 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -17,6 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -2195,7 +2196,8 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 	/* Assume card is present initially */
 	set_bit(ATMCI_CARD_PRESENT, &slot->flags);
 	if (gpio_is_valid(slot->detect_pin)) {
-		if (gpio_request(slot->detect_pin, "mmc_detect")) {
+		if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
+				      "mmc_detect")) {
 			dev_dbg(&mmc->class_dev, "no detect pin available\n");
 			slot->detect_pin = -EBUSY;
 		} else if (gpio_get_value(slot->detect_pin) ^
@@ -2208,7 +2210,8 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	if (gpio_is_valid(slot->wp_pin)) {
-		if (gpio_request(slot->wp_pin, "mmc_wp")) {
+		if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
+				      "mmc_wp")) {
 			dev_dbg(&mmc->class_dev, "no WP pin available\n");
 			slot->wp_pin = -EBUSY;
 		}
@@ -2232,7 +2235,6 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 			dev_dbg(&mmc->class_dev,
 				"could not request IRQ %d for detect pin\n",
 				gpio_to_irq(slot->detect_pin));
-			gpio_free(slot->detect_pin);
 			slot->detect_pin = -EBUSY;
 		}
 	}
@@ -2242,7 +2244,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 	return 0;
 }
 
-static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
+static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
 		unsigned int id)
 {
 	/* Debugfs stuff is cleaned up by mmc core */
@@ -2257,10 +2259,7 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
 
 		free_irq(gpio_to_irq(pin), slot);
 		del_timer_sync(&slot->detect_timer);
-		gpio_free(pin);
 	}
-	if (gpio_is_valid(slot->wp_pin))
-		gpio_free(slot->wp_pin);
 
 	slot->host->slot[id] = NULL;
 	mmc_free_host(slot->mmc);
@@ -2344,6 +2343,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
 
 	/* keep only major version number */
 	switch (version & 0xf00) {
+	case 0x600:
 	case 0x500:
 		host->caps.has_odd_clk_div = 1;
 	case 0x400:
@@ -2377,7 +2377,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 	struct resource			*regs;
 	unsigned int			nr_slots;
 	int				irq;
-	int				ret;
+	int				ret, i;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs)
@@ -2395,7 +2395,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
 
@@ -2403,20 +2403,18 @@ static int __init atmci_probe(struct platform_device *pdev)
 	spin_lock_init(&host->lock);
 	INIT_LIST_HEAD(&host->queue);
 
-	host->mck = clk_get(&pdev->dev, "mci_clk");
-	if (IS_ERR(host->mck)) {
-		ret = PTR_ERR(host->mck);
-		goto err_clk_get;
-	}
+	host->mck = devm_clk_get(&pdev->dev, "mci_clk");
+	if (IS_ERR(host->mck))
+		return PTR_ERR(host->mck);
 
-	ret = -ENOMEM;
-	host->regs = ioremap(regs->start, resource_size(regs));
+	host->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!host->regs)
-		goto err_ioremap;
+		return -ENOMEM;
 
 	ret = clk_prepare_enable(host->mck);
 	if (ret)
-		goto err_request_irq;
+		return ret;
+
 	atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
 	host->bus_hz = clk_get_rate(host->mck);
 	clk_disable_unprepare(host->mck);
@@ -2427,7 +2425,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
 	if (ret)
-		goto err_request_irq;
+		return ret;
 
 	/* Get MCI capabilities and set operations according to it */
 	atmci_get_cap(host);
@@ -2485,7 +2483,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 		if (!host->buffer) {
 			ret = -ENOMEM;
 			dev_err(&pdev->dev, "buffer allocation failed\n");
-			goto err_init_slot;
+			goto err_dma_alloc;
 		}
 	}
 
@@ -2495,16 +2493,16 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_dma_alloc:
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+		if (host->slot[i])
+			atmci_cleanup_slot(host->slot[i], i);
+	}
 err_init_slot:
+	del_timer_sync(&host->timer);
 	if (host->dma.chan)
 		dma_release_channel(host->dma.chan);
 	free_irq(irq, host);
-err_request_irq:
-	iounmap(host->regs);
-err_ioremap:
-	clk_put(host->mck);
-err_clk_get:
-	kfree(host);
 	return ret;
 }
 
@@ -2528,14 +2526,11 @@ static int __exit atmci_remove(struct platform_device *pdev)
 	atmci_readl(host, ATMCI_SR);
 	clk_disable_unprepare(host->mck);
 
+	del_timer_sync(&host->timer);
 	if (host->dma.chan)
 		dma_release_channel(host->dma.chan);
 
 	free_irq(platform_get_irq(pdev, 0), host);
-	iounmap(host->regs);
-
-	clk_put(host->mck);
-	kfree(host);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 9c9f6af29251..725f6a6fd89b 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -1028,9 +1028,12 @@ static int au1xmmc_probe(struct platform_device *pdev)
 	host->clk = clk_get(&pdev->dev, ALCHEMY_PERIPH_CLK);
 	if (IS_ERR(host->clk)) {
 		dev_err(&pdev->dev, "cannot find clock\n");
+		ret = PTR_ERR(host->clk);
 		goto out_irq;
 	}
-	if (clk_prepare_enable(host->clk)) {
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret) {
 		dev_err(&pdev->dev, "cannot enable clock\n");
 		goto out_clk;
 	}
diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
index 6ada1b36685b..4c69fbd29811 100644
--- a/drivers/mmc/host/dw_mmc-pci.c
+++ b/drivers/mmc/host/dw_mmc-pci.c
@@ -95,9 +95,6 @@ static int dw_mci_pci_resume(struct device *dev)
 
 	return dw_mci_resume(host);
 }
-#else
-#define dw_mci_pci_suspend	NULL
-#define dw_mci_pci_resume	NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static SIMPLE_DEV_PM_OPS(dw_mci_pci_pmops, dw_mci_pci_suspend, dw_mci_pci_resume);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index d4a47a9f5584..8b6572162ed9 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -21,6 +21,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/dw_mmc.h>
 #include <linux/of.h>
+#include <linux/clk.h>
 
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
@@ -30,10 +31,6 @@ static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
 	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
 }
 
-static const struct dw_mci_drv_data rockchip_drv_data = {
-	.prepare_command	= dw_mci_pltfm_prepare_command,
-};
-
 static const struct dw_mci_drv_data socfpga_drv_data = {
 	.prepare_command	= dw_mci_pltfm_prepare_command,
 };
@@ -84,9 +81,6 @@ static int dw_mci_pltfm_resume(struct device *dev)
 
 	return dw_mci_resume(host);
 }
-#else
-#define dw_mci_pltfm_suspend	NULL
-#define dw_mci_pltfm_resume	NULL
 #endif /* CONFIG_PM_SLEEP */
 
 SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume);
@@ -94,8 +88,6 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
 
 static const struct of_device_id dw_mci_pltfm_match[] = {
 	{ .compatible = "snps,dw-mshc", },
-	{ .compatible = "rockchip,rk2928-dw-mshc",
-		.data = &rockchip_drv_data },
 	{ .compatible = "altr,socfpga-dw-mshc",
 		.data = &socfpga_drv_data },
 	{},
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
new file mode 100644
index 000000000000..f0c2cb1a210d
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define RK3288_CLKGEN_DIV       2
+
+static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
+{
+	host->bus_hz /= RK3288_CLKGEN_DIV;
+
+	return 0;
+}
+
+static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned int cclkin;
+	u32 bus_hz;
+
+	/*
+	 * cclkin: source clock of mmc controller
+	 * bus_hz: card interface clock generated by CLKGEN
+	 * bus_hz = cclkin / RK3288_CLKGEN_DIV
+	 * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
+	 *
+	 * Note: div can only be 0 or 1
+	 *       if DDR50 8bit mode(only emmc work in 8bit mode),
+	 *       div must be set 1
+	 */
+	if (ios->bus_width == MMC_BUS_WIDTH_8 &&
+	    ios->timing == MMC_TIMING_MMC_DDR52)
+		cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
+	else
+		cclkin = ios->clock * RK3288_CLKGEN_DIV;
+
+	ret = clk_set_rate(host->ciu_clk, cclkin);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
+	if (bus_hz != host->bus_hz) {
+		host->bus_hz = bus_hz;
+		/* force dw_mci_setup_bus() */
+		host->current_speed = 0;
+	}
+}
+
+static const struct dw_mci_drv_data rk2928_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+};
+
+static const struct dw_mci_drv_data rk3288_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+	.set_ios		= dw_mci_rk3288_set_ios,
+	.setup_clock    = dw_mci_rk3288_setup_clock,
+};
+
+static const struct of_device_id dw_mci_rockchip_match[] = {
+	{ .compatible = "rockchip,rk2928-dw-mshc",
+		.data = &rk2928_drv_data },
+	{ .compatible = "rockchip,rk3288-dw-mshc",
+		.data = &rk3288_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+
+static int dw_mci_rockchip_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_rockchip_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_suspend(host);
+}
+
+static int dw_mci_rockchip_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
+			 dw_mci_rockchip_suspend,
+			 dw_mci_rockchip_resume);
+
+static struct platform_driver dw_mci_rockchip_pltfm_driver = {
+	.probe		= dw_mci_rockchip_probe,
+	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.driver		= {
+		.name		= "dwmmc_rockchip",
+		.of_match_table	= dw_mci_rockchip_match,
+		.pm		= &dw_mci_rockchip_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_rockchip_pltfm_driver);
+
+MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension");
+MODULE_ALIAS("platform:dwmmc-rockchip");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 8f216edbdf08..69f0cc68d5b2 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -29,6 +29,7 @@
 #include <linux/irq.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/dw_mmc.h>
 #include <linux/bitops.h>
@@ -81,36 +82,6 @@ struct idmac_desc {
 };
 #endif /* CONFIG_MMC_DW_IDMAC */
 
-static const u8 tuning_blk_pattern_4bit[] = {
-	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
-	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
-	0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
-	0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
-	0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
-	0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
-	0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
-	0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
-};
-
-static const u8 tuning_blk_pattern_8bit[] = {
-	0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
-	0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
-	0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
-	0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
-	0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
-	0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
-	0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
-	0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
-	0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
-	0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
-	0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
-	0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
-	0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
-	0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
-	0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
-	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
-};
-
 static bool dw_mci_reset(struct dw_mci *host);
 
 #if defined(CONFIG_DEBUG_FS)
@@ -234,10 +205,13 @@ err:
 }
 #endif /* defined(CONFIG_DEBUG_FS) */
 
+static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
+
 static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
 {
 	struct mmc_data	*data;
 	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
 	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
 	u32 cmdr;
 	cmd->error = -EINPROGRESS;
@@ -253,6 +227,34 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
 	else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
 		cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
 
+	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+		u32 clk_en_a;
+
+		/* Special bit makes CMD11 not die */
+		cmdr |= SDMMC_CMD_VOLT_SWITCH;
+
+		/* Change state to continue to handle CMD11 weirdness */
+		WARN_ON(slot->host->state != STATE_SENDING_CMD);
+		slot->host->state = STATE_SENDING_CMD11;
+
+		/*
+		 * We need to disable low power mode (automatic clock stop)
+		 * while doing voltage switch so we don't confuse the card,
+		 * since stopping the clock is a specific part of the UHS
+		 * voltage change dance.
+		 *
+		 * Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
+		 * unconditionally turned back on in dw_mci_setup_bus() if it's
+		 * ever called with a non-zero clock.  That shouldn't happen
+		 * until the voltage change is all done.
+		 */
+		clk_en_a = mci_readl(host, CLKENA);
+		clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
+		mci_writel(host, CLKENA, clk_en_a);
+		mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+			     SDMMC_CMD_PRV_DAT_WAIT, 0);
+	}
+
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		/* We expect a response, so set this bit */
 		cmdr |= SDMMC_CMD_RESP_EXP;
@@ -775,11 +777,15 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 	unsigned int clock = slot->clock;
 	u32 div;
 	u32 clk_en_a;
+	u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
+
+	/* We must continue to set bit 28 in CMD until the change is complete */
+	if (host->state == STATE_WAITING_CMD11_DONE)
+		sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
 
 	if (!clock) {
 		mci_writel(host, CLKENA, 0);
-		mci_send_cmd(slot,
-			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
 	} else if (clock != host->current_speed || force_clkinit) {
 		div = host->bus_hz / clock;
 		if (host->bus_hz % clock && host->bus_hz > clock)
@@ -803,15 +809,13 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 		mci_writel(host, CLKSRC, 0);
 
 		/* inform CIU */
-		mci_send_cmd(slot,
-			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
 
 		/* set clock to desired speed */
 		mci_writel(host, CLKDIV, div);
 
 		/* inform CIU */
-		mci_send_cmd(slot,
-			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
 
 		/* enable clock; only low power if no SDIO */
 		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
@@ -820,8 +824,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 		mci_writel(host, CLKENA, clk_en_a);
 
 		/* inform CIU */
-		mci_send_cmd(slot,
-			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
 
 		/* keep the clock with reflecting clock dividor */
 		slot->__clk_old = clock << div;
@@ -897,6 +900,17 @@ static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
 
 	slot->mrq = mrq;
 
+	if (host->state == STATE_WAITING_CMD11_DONE) {
+		dev_warn(&slot->mmc->class_dev,
+			 "Voltage change didn't complete\n");
+		/*
+		 * this case isn't expected to happen, so we can
+		 * either crash here or just try to continue on
+		 * in the closest possible state
+		 */
+		host->state = STATE_IDLE;
+	}
+
 	if (host->state == STATE_IDLE) {
 		host->state = STATE_SENDING_CMD;
 		dw_mci_start_request(host, slot);
@@ -936,6 +950,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct dw_mci_slot *slot = mmc_priv(mmc);
 	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
 	u32 regs;
+	int ret;
 
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_4:
@@ -972,14 +987,43 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	/* Slot specific timing and width adjustment */
 	dw_mci_setup_bus(slot, false);
 
+	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
+		slot->host->state = STATE_IDLE;
+
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
+		if (!IS_ERR(mmc->supply.vmmc)) {
+			ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+					ios->vdd);
+			if (ret) {
+				dev_err(slot->host->dev,
+					"failed to enable vmmc regulator\n");
+				/*return, if failed turn on vmmc*/
+				return;
+			}
+		}
+		if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
+			ret = regulator_enable(mmc->supply.vqmmc);
+			if (ret < 0)
+				dev_err(slot->host->dev,
+					"failed to enable vqmmc regulator\n");
+			else
+				slot->host->vqmmc_enabled = true;
+		}
 		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
 		regs = mci_readl(slot->host, PWREN);
 		regs |= (1 << slot->id);
 		mci_writel(slot->host, PWREN, regs);
 		break;
 	case MMC_POWER_OFF:
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
+		if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
+			regulator_disable(mmc->supply.vqmmc);
+			slot->host->vqmmc_enabled = false;
+		}
+
 		regs = mci_readl(slot->host, PWREN);
 		regs &= ~(1 << slot->id);
 		mci_writel(slot->host, PWREN, regs);
@@ -989,6 +1033,59 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 }
 
+static int dw_mci_card_busy(struct mmc_host *mmc)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	u32 status;
+
+	/*
+	 * Check the busy bit which is low when DAT[3:0]
+	 * (the data lines) are 0000
+	 */
+	status = mci_readl(slot->host, STATUS);
+
+	return !!(status & SDMMC_STATUS_BUSY);
+}
+
+static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	u32 uhs;
+	u32 v18 = SDMMC_UHS_18V << slot->id;
+	int min_uv, max_uv;
+	int ret;
+
+	/*
+	 * Program the voltage.  Note that some instances of dw_mmc may use
+	 * the UHS_REG for this.  For other instances (like exynos) the UHS_REG
+	 * does no harm but you need to set the regulator directly.  Try both.
+	 */
+	uhs = mci_readl(host, UHS_REG);
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+		min_uv = 2700000;
+		max_uv = 3600000;
+		uhs &= ~v18;
+	} else {
+		min_uv = 1700000;
+		max_uv = 1950000;
+		uhs |= v18;
+	}
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+
+		if (ret) {
+			dev_err(&mmc->class_dev,
+					 "Regulator set error %d: %d - %d\n",
+					 ret, min_uv, max_uv);
+			return ret;
+		}
+	}
+	mci_writel(host, UHS_REG, uhs);
+
+	return 0;
+}
+
 static int dw_mci_get_ro(struct mmc_host *mmc)
 {
 	int read_only;
@@ -1131,6 +1228,9 @@ static const struct mmc_host_ops dw_mci_ops = {
 	.get_cd			= dw_mci_get_cd,
 	.enable_sdio_irq	= dw_mci_enable_sdio_irq,
 	.execute_tuning		= dw_mci_execute_tuning,
+	.card_busy		= dw_mci_card_busy,
+	.start_signal_voltage_switch = dw_mci_switch_voltage,
+
 };
 
 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
@@ -1154,7 +1254,11 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
 		dw_mci_start_request(host, slot);
 	} else {
 		dev_vdbg(host->dev, "list empty\n");
-		host->state = STATE_IDLE;
+
+		if (host->state == STATE_SENDING_CMD11)
+			host->state = STATE_WAITING_CMD11_DONE;
+		else
+			host->state = STATE_IDLE;
 	}
 
 	spin_unlock(&host->lock);
@@ -1265,8 +1369,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
 
 		switch (state) {
 		case STATE_IDLE:
+		case STATE_WAITING_CMD11_DONE:
 			break;
 
+		case STATE_SENDING_CMD11:
 		case STATE_SENDING_CMD:
 			if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
 						&host->pending_events))
@@ -1299,6 +1405,14 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			/* fall through */
 
 		case STATE_SENDING_DATA:
+			/*
+			 * We could get a data error and never a transfer
+			 * complete so we'd better check for it here.
+			 *
+			 * Note that we don't really care if we also got a
+			 * transfer complete; stopping the DMA and sending an
+			 * abort won't hurt.
+			 */
 			if (test_and_clear_bit(EVENT_DATA_ERROR,
 					       &host->pending_events)) {
 				dw_mci_stop_dma(host);
@@ -1312,7 +1426,29 @@ static void dw_mci_tasklet_func(unsigned long priv)
 				break;
 
 			set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
+
+			/*
+			 * Handle an EVENT_DATA_ERROR that might have shown up
+			 * before the transfer completed.  This might not have
+			 * been caught by the check above because the interrupt
+			 * could have gone off between the previous check and
+			 * the check for transfer complete.
+			 *
+			 * Technically this ought not be needed assuming we
+			 * get a DATA_COMPLETE eventually (we'll notice the
+			 * error and end the request), but it shouldn't hurt.
+			 *
+			 * This has the advantage of sending the stop command.
+			 */
+			if (test_and_clear_bit(EVENT_DATA_ERROR,
+					       &host->pending_events)) {
+				dw_mci_stop_dma(host);
+				send_stop_abort(host, data);
+				state = STATE_DATA_ERROR;
+				break;
+			}
 			prev_state = state = STATE_DATA_BUSY;
+
 			/* fall through */
 
 		case STATE_DATA_BUSY:
@@ -1335,6 +1471,22 @@ static void dw_mci_tasklet_func(unsigned long priv)
 				/* stop command for open-ended transfer*/
 				if (data->stop)
 					send_stop_abort(host, data);
+			} else {
+				/*
+				 * If we don't have a command complete now we'll
+				 * never get one since we just reset everything;
+				 * better end the request.
+				 *
+				 * If we do have a command complete we'll fall
+				 * through to the SENDING_STOP command and
+				 * everything will be peachy keen.
+				 */
+				if (!test_bit(EVENT_CMD_COMPLETE,
+					      &host->pending_events)) {
+					host->cmd = NULL;
+					dw_mci_request_end(host, mrq);
+					goto unlock;
+				}
 			}
 
 			/*
@@ -1821,6 +1973,14 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 	}
 
 	if (pending) {
+		/* Check volt switch first, since it can look like an error */
+		if ((host->state == STATE_SENDING_CMD11) &&
+		    (pending & SDMMC_INT_VOLT_SWITCH)) {
+			mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
+			pending &= ~SDMMC_INT_VOLT_SWITCH;
+			dw_mci_cmd_interrupt(host, pending);
+		}
+
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
 			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
 			host->cmd_status = pending;
@@ -1926,7 +2086,9 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 
 					switch (host->state) {
 					case STATE_IDLE:
+					case STATE_WAITING_CMD11_DONE:
 						break;
+					case STATE_SENDING_CMD11:
 					case STATE_SENDING_CMD:
 						mrq->cmd->error = -ENOMEDIUM;
 						if (!mrq->data)
@@ -2028,10 +2190,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 {
 	return 0;
 }
-static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
-{
-	return NULL;
-}
 #endif /* CONFIG_OF */
 
 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
@@ -2064,7 +2222,13 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 		mmc->f_max = freq[1];
 	}
 
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	/*if there are external regulators, get them*/
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret == -EPROBE_DEFER)
+		goto err_host_allocated;
+
+	if (!mmc->ocr_avail)
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
 	if (host->pdata->caps)
 		mmc->caps = host->pdata->caps;
@@ -2085,7 +2249,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	if (host->pdata->caps2)
 		mmc->caps2 = host->pdata->caps2;
 
-	mmc_of_parse(mmc);
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto err_host_allocated;
 
 	if (host->pdata->blk_settings) {
 		mmc->max_segs = host->pdata->blk_settings->max_segs;
@@ -2117,7 +2283,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 
 	ret = mmc_add_host(mmc);
 	if (ret)
-		goto err_setup_bus;
+		goto err_host_allocated;
 
 #if defined(CONFIG_DEBUG_FS)
 	dw_mci_init_debugfs(slot);
@@ -2128,9 +2294,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 
 	return 0;
 
-err_setup_bus:
+err_host_allocated:
 	mmc_free_host(mmc);
-	return -EINVAL;
+	return ret;
 }
 
 static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
@@ -2423,24 +2589,6 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
-	host->vmmc = devm_regulator_get_optional(host->dev, "vmmc");
-	if (IS_ERR(host->vmmc)) {
-		ret = PTR_ERR(host->vmmc);
-		if (ret == -EPROBE_DEFER)
-			goto err_clk_ciu;
-
-		dev_info(host->dev, "no vmmc regulator found: %d\n", ret);
-		host->vmmc = NULL;
-	} else {
-		ret = regulator_enable(host->vmmc);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(host->dev,
-					"regulator_enable fail: %d\n", ret);
-			goto err_clk_ciu;
-		}
-	}
-
 	host->quirks = host->pdata->quirks;
 
 	spin_lock_init(&host->lock);
@@ -2584,8 +2732,6 @@ err_workqueue:
 err_dmaunmap:
 	if (host->use_dma && host->dma_ops->exit)
 		host->dma_ops->exit(host);
-	if (host->vmmc)
-		regulator_disable(host->vmmc);
 
 err_clk_ciu:
 	if (!IS_ERR(host->ciu_clk))
@@ -2621,9 +2767,6 @@ void dw_mci_remove(struct dw_mci *host)
 	if (host->use_dma && host->dma_ops->exit)
 		host->dma_ops->exit(host);
 
-	if (host->vmmc)
-		regulator_disable(host->vmmc);
-
 	if (!IS_ERR(host->ciu_clk))
 		clk_disable_unprepare(host->ciu_clk);
 
@@ -2640,9 +2783,6 @@ EXPORT_SYMBOL(dw_mci_remove);
  */
 int dw_mci_suspend(struct dw_mci *host)
 {
-	if (host->vmmc)
-		regulator_disable(host->vmmc);
-
 	return 0;
 }
 EXPORT_SYMBOL(dw_mci_suspend);
@@ -2651,15 +2791,6 @@ int dw_mci_resume(struct dw_mci *host)
 {
 	int i, ret;
 
-	if (host->vmmc) {
-		ret = regulator_enable(host->vmmc);
-		if (ret) {
-			dev_err(host->dev,
-				"failed to enable regulator: %d\n", ret);
-			return ret;
-		}
-	}
-
 	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
 		ret = -ENODEV;
 		return ret;
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 08fd956d81f3..01b99e8a9190 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -99,6 +99,7 @@
 #define SDMMC_INT_HLE			BIT(12)
 #define SDMMC_INT_FRUN			BIT(11)
 #define SDMMC_INT_HTO			BIT(10)
+#define SDMMC_INT_VOLT_SWITCH		BIT(10) /* overloads bit 10! */
 #define SDMMC_INT_DRTO			BIT(9)
 #define SDMMC_INT_RTO			BIT(8)
 #define SDMMC_INT_DCRC			BIT(7)
@@ -113,6 +114,7 @@
 /* Command register defines */
 #define SDMMC_CMD_START			BIT(31)
 #define SDMMC_CMD_USE_HOLD_REG	BIT(29)
+#define SDMMC_CMD_VOLT_SWITCH		BIT(28)
 #define SDMMC_CMD_CCS_EXP		BIT(23)
 #define SDMMC_CMD_CEATA_RD		BIT(22)
 #define SDMMC_CMD_UPD_CLK		BIT(21)
@@ -130,6 +132,7 @@
 /* Status register defines */
 #define SDMMC_GET_FCNT(x)		(((x)>>17) & 0x1FFF)
 #define SDMMC_STATUS_DMA_REQ		BIT(31)
+#define SDMMC_STATUS_BUSY		BIT(9)
 /* FIFOTH register defines */
 #define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
 					 ((r) & 0xFFF) << 16 | \
@@ -150,7 +153,7 @@
 #define SDMMC_GET_VERID(x)		((x) & 0xFFFF)
 /* Card read threshold */
 #define SDMMC_SET_RD_THLD(v, x)		(((v) & 0x1FFF) << 16 | (x))
-
+#define SDMMC_UHS_18V			BIT(0)
 /* All ctrl reset bits */
 #define SDMMC_CTRL_ALL_RESET_FLAGS \
 	(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 537d6c7a5ae4..76e8bce6f46e 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -30,7 +30,9 @@
 #include <asm/mach-jz4740/gpio.h>
 #include <asm/cacheflush.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 
+#include <asm/mach-jz4740/dma.h>
 #include <asm/mach-jz4740/jz4740_mmc.h>
 
 #define JZ_REG_MMC_STRPCL	0x00
@@ -112,6 +114,11 @@ enum jz4740_mmc_state {
 	JZ4740_MMC_STATE_DONE,
 };
 
+struct jz4740_mmc_host_next {
+	int sg_len;
+	s32 cookie;
+};
+
 struct jz4740_mmc_host {
 	struct mmc_host *mmc;
 	struct platform_device *pdev;
@@ -122,6 +129,7 @@ struct jz4740_mmc_host {
 	int card_detect_irq;
 
 	void __iomem *base;
+	struct resource *mem_res;
 	struct mmc_request *req;
 	struct mmc_command *cmd;
 
@@ -136,8 +144,220 @@ struct jz4740_mmc_host {
 	struct timer_list timeout_timer;
 	struct sg_mapping_iter miter;
 	enum jz4740_mmc_state state;
+
+	/* DMA support */
+	struct dma_chan *dma_rx;
+	struct dma_chan *dma_tx;
+	struct jz4740_mmc_host_next next_data;
+	bool use_dma;
+	int sg_len;
+
+/* The DMA trigger level is 8 words, that is to say, the DMA read
+ * trigger is when data words in MSC_RXFIFO is >= 8 and the DMA write
+ * trigger is when data words in MSC_TXFIFO is < 8.
+ */
+#define JZ4740_MMC_FIFO_HALF_SIZE 8
 };
 
+/*----------------------------------------------------------------------------*/
+/* DMA infrastructure */
+
+static void jz4740_mmc_release_dma_channels(struct jz4740_mmc_host *host)
+{
+	if (!host->use_dma)
+		return;
+
+	dma_release_channel(host->dma_tx);
+	dma_release_channel(host->dma_rx);
+}
+
+static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
+{
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	host->dma_tx = dma_request_channel(mask, NULL, host);
+	if (!host->dma_tx) {
+		dev_err(mmc_dev(host->mmc), "Failed to get dma_tx channel\n");
+		return -ENODEV;
+	}
+
+	host->dma_rx = dma_request_channel(mask, NULL, host);
+	if (!host->dma_rx) {
+		dev_err(mmc_dev(host->mmc), "Failed to get dma_rx channel\n");
+		goto free_master_write;
+	}
+
+	/* Initialize DMA pre request cookie */
+	host->next_data.cookie = 1;
+
+	return 0;
+
+free_master_write:
+	dma_release_channel(host->dma_tx);
+	return -ENODEV;
+}
+
+static inline int jz4740_mmc_get_dma_dir(struct mmc_data *data)
+{
+	return (data->flags & MMC_DATA_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+}
+
+static inline struct dma_chan *jz4740_mmc_get_dma_chan(struct jz4740_mmc_host *host,
+						       struct mmc_data *data)
+{
+	return (data->flags & MMC_DATA_READ) ? host->dma_rx : host->dma_tx;
+}
+
+static void jz4740_mmc_dma_unmap(struct jz4740_mmc_host *host,
+				 struct mmc_data *data)
+{
+	struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
+	enum dma_data_direction dir = jz4740_mmc_get_dma_dir(data);
+
+	dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+}
+
+/* Prepares DMA data for current/next transfer, returns non-zero on failure */
+static int jz4740_mmc_prepare_dma_data(struct jz4740_mmc_host *host,
+				       struct mmc_data *data,
+				       struct jz4740_mmc_host_next *next,
+				       struct dma_chan *chan)
+{
+	struct jz4740_mmc_host_next *next_data = &host->next_data;
+	enum dma_data_direction dir = jz4740_mmc_get_dma_dir(data);
+	int sg_len;
+
+	if (!next && data->host_cookie &&
+	    data->host_cookie != host->next_data.cookie) {
+		dev_warn(mmc_dev(host->mmc),
+			 "[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
+			 __func__,
+			 data->host_cookie,
+			 host->next_data.cookie);
+		data->host_cookie = 0;
+	}
+
+	/* Check if next job is already prepared */
+	if (next || data->host_cookie != host->next_data.cookie) {
+		sg_len = dma_map_sg(chan->device->dev,
+				    data->sg,
+				    data->sg_len,
+				    dir);
+
+	} else {
+		sg_len = next_data->sg_len;
+		next_data->sg_len = 0;
+	}
+
+	if (sg_len <= 0) {
+		dev_err(mmc_dev(host->mmc),
+			"Failed to map scatterlist for DMA operation\n");
+		return -EINVAL;
+	}
+
+	if (next) {
+		next->sg_len = sg_len;
+		data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
+	} else
+		host->sg_len = sg_len;
+
+	return 0;
+}
+
+static int jz4740_mmc_start_dma_transfer(struct jz4740_mmc_host *host,
+					 struct mmc_data *data)
+{
+	int ret;
+	struct dma_chan *chan;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_slave_config conf = {
+		.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+		.src_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
+		.dst_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
+	};
+
+	if (data->flags & MMC_DATA_WRITE) {
+		conf.direction = DMA_MEM_TO_DEV;
+		conf.dst_addr = host->mem_res->start + JZ_REG_MMC_TXFIFO;
+		conf.slave_id = JZ4740_DMA_TYPE_MMC_TRANSMIT;
+		chan = host->dma_tx;
+	} else {
+		conf.direction = DMA_DEV_TO_MEM;
+		conf.src_addr = host->mem_res->start + JZ_REG_MMC_RXFIFO;
+		conf.slave_id = JZ4740_DMA_TYPE_MMC_RECEIVE;
+		chan = host->dma_rx;
+	}
+
+	ret = jz4740_mmc_prepare_dma_data(host, data, NULL, chan);
+	if (ret)
+		return ret;
+
+	dmaengine_slave_config(chan, &conf);
+	desc = dmaengine_prep_slave_sg(chan,
+				       data->sg,
+				       host->sg_len,
+				       conf.direction,
+				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(mmc_dev(host->mmc),
+			"Failed to allocate DMA %s descriptor",
+			 conf.direction == DMA_MEM_TO_DEV ? "TX" : "RX");
+		goto dma_unmap;
+	}
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(chan);
+
+	return 0;
+
+dma_unmap:
+	jz4740_mmc_dma_unmap(host, data);
+	return -ENOMEM;
+}
+
+static void jz4740_mmc_pre_request(struct mmc_host *mmc,
+				   struct mmc_request *mrq,
+				   bool is_first_req)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+	struct jz4740_mmc_host_next *next_data = &host->next_data;
+
+	BUG_ON(data->host_cookie);
+
+	if (host->use_dma) {
+		struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
+
+		if (jz4740_mmc_prepare_dma_data(host, data, next_data, chan))
+			data->host_cookie = 0;
+	}
+}
+
+static void jz4740_mmc_post_request(struct mmc_host *mmc,
+				    struct mmc_request *mrq,
+				    int err)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (host->use_dma && data->host_cookie) {
+		jz4740_mmc_dma_unmap(host, data);
+		data->host_cookie = 0;
+	}
+
+	if (err) {
+		struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
+
+		dmaengine_terminate_all(chan);
+	}
+}
+
+/*----------------------------------------------------------------------------*/
+
 static void jz4740_mmc_set_irq_enabled(struct jz4740_mmc_host *host,
 	unsigned int irq, bool enabled)
 {
@@ -442,6 +662,8 @@ static void jz4740_mmc_send_command(struct jz4740_mmc_host *host,
 			cmdat |= JZ_MMC_CMDAT_WRITE;
 		if (cmd->data->flags & MMC_DATA_STREAM)
 			cmdat |= JZ_MMC_CMDAT_STREAM;
+		if (host->use_dma)
+			cmdat |= JZ_MMC_CMDAT_DMA_EN;
 
 		writew(cmd->data->blksz, host->base + JZ_REG_MMC_BLKLEN);
 		writew(cmd->data->blocks, host->base + JZ_REG_MMC_NOB);
@@ -474,6 +696,7 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
 	struct jz4740_mmc_host *host = (struct jz4740_mmc_host *)devid;
 	struct mmc_command *cmd = host->req->cmd;
 	struct mmc_request *req = host->req;
+	struct mmc_data *data = cmd->data;
 	bool timeout = false;
 
 	if (cmd->error)
@@ -484,23 +707,37 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
 		if (cmd->flags & MMC_RSP_PRESENT)
 			jz4740_mmc_read_response(host, cmd);
 
-		if (!cmd->data)
+		if (!data)
 			break;
 
 		jz_mmc_prepare_data_transfer(host);
 
 	case JZ4740_MMC_STATE_TRANSFER_DATA:
-		if (cmd->data->flags & MMC_DATA_READ)
-			timeout = jz4740_mmc_read_data(host, cmd->data);
+		if (host->use_dma) {
+			/* Use DMA if enabled.
+			 * Data transfer direction is defined later by
+			 * relying on data flags in
+			 * jz4740_mmc_prepare_dma_data() and
+			 * jz4740_mmc_start_dma_transfer().
+			 */
+			timeout = jz4740_mmc_start_dma_transfer(host, data);
+			data->bytes_xfered = data->blocks * data->blksz;
+		} else if (data->flags & MMC_DATA_READ)
+			/* Use PIO if DMA is not enabled.
+			 * Data transfer direction was defined before
+			 * by relying on data flags in
+			 * jz_mmc_prepare_data_transfer().
+			 */
+			timeout = jz4740_mmc_read_data(host, data);
 		else
-			timeout = jz4740_mmc_write_data(host, cmd->data);
+			timeout = jz4740_mmc_write_data(host, data);
 
 		if (unlikely(timeout)) {
 			host->state = JZ4740_MMC_STATE_TRANSFER_DATA;
 			break;
 		}
 
-		jz4740_mmc_transfer_check_state(host, cmd->data);
+		jz4740_mmc_transfer_check_state(host, data);
 
 		timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
 		if (unlikely(timeout)) {
@@ -664,6 +901,8 @@ static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 static const struct mmc_host_ops jz4740_mmc_ops = {
 	.request	= jz4740_mmc_request,
+	.pre_req	= jz4740_mmc_pre_request,
+	.post_req	= jz4740_mmc_post_request,
 	.set_ios	= jz4740_mmc_set_ios,
 	.get_ro		= mmc_gpio_get_ro,
 	.get_cd		= mmc_gpio_get_cd,
@@ -757,7 +996,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	struct mmc_host *mmc;
 	struct jz4740_mmc_host *host;
 	struct jz4740_mmc_platform_data *pdata;
-	struct resource *res;
 
 	pdata = pdev->dev.platform_data;
 
@@ -784,10 +1022,11 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 		goto err_free_host;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	host->base = devm_ioremap_resource(&pdev->dev, res);
+	host->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->base = devm_ioremap_resource(&pdev->dev, host->mem_res);
 	if (IS_ERR(host->base)) {
 		ret = PTR_ERR(host->base);
+		dev_err(&pdev->dev, "Failed to ioremap base memory\n");
 		goto err_free_host;
 	}
 
@@ -834,6 +1073,10 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	/* It is not important when it times out, it just needs to timeout. */
 	set_timer_slack(&host->timeout_timer, HZ);
 
+	host->use_dma = true;
+	if (host->use_dma && jz4740_mmc_acquire_dma_channels(host) != 0)
+		host->use_dma = false;
+
 	platform_set_drvdata(pdev, host);
 	ret = mmc_add_host(mmc);
 
@@ -843,6 +1086,10 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	}
 	dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n");
 
+	dev_info(&pdev->dev, "Using %s, %d-bit mode\n",
+		 host->use_dma ? "DMA" : "PIO",
+		 (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1);
+
 	return 0;
 
 err_free_irq:
@@ -850,6 +1097,8 @@ err_free_irq:
 err_free_gpios:
 	jz4740_mmc_free_gpios(pdev);
 err_gpio_bulk_free:
+	if (host->use_dma)
+		jz4740_mmc_release_dma_channels(host);
 	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 err_free_host:
 	mmc_free_host(mmc);
@@ -872,6 +1121,9 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
 	jz4740_mmc_free_gpios(pdev);
 	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 
+	if (host->use_dma)
+		jz4740_mmc_release_dma_channels(host);
+
 	mmc_free_host(host->mmc);
 
 	return 0;
@@ -909,7 +1161,6 @@ static struct platform_driver jz4740_mmc_driver = {
 	.remove = jz4740_mmc_remove,
 	.driver = {
 		.name = "jz4740-mmc",
-		.owner = THIS_MODULE,
 		.pm = JZ4740_MMC_PM_OPS,
 	},
 };
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index cc8d4a6099cd..e4a07546f8b6 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1436,6 +1436,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 					     host->pdata->cd_debounce);
 		if (status != 0)
 			goto fail_add_host;
+		mmc_gpiod_request_cd_irq(mmc);
 	}
 
 	if (host->pdata && host->pdata->flags & MMC_SPI_USE_RO_GPIO) {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e4d470704150..43af791e2e45 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -43,6 +43,7 @@
 #include <asm/sizes.h>
 
 #include "mmci.h"
+#include "mmci_qcom_dml.h"
 
 #define DRIVER_NAME "mmci-pl18x"
 
@@ -60,12 +61,13 @@ static unsigned int fmax = 515633;
  * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
  *		  is asserted (likewise for RX)
  * @data_cmd_enable: enable value for data commands.
- * @sdio: variant supports SDIO
+ * @st_sdio: enable ST specific SDIO logic
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
  * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
  * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
  * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
  *		     register
+ * @datactrl_mask_sdio: SDIO enable mask in datactrl register
  * @pwrreg_powerup: power up value for MMCIPOWER register
  * @f_max: maximum clk frequency supported by the controller.
  * @signal_direction: input/out direction of bus signals can be indicated
@@ -74,6 +76,7 @@ static unsigned int fmax = 515633;
  * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply
  * @explicit_mclk_control: enable explicit mclk control in driver.
  * @qcom_fifo: enables qcom specific fifo pio read logic.
+ * @qcom_dml: enables qcom specific dma glue for dma transfers.
  * @reversed_irq_handling: handle data irq before cmd irq.
  */
 struct variant_data {
@@ -86,7 +89,8 @@ struct variant_data {
 	unsigned int		fifohalfsize;
 	unsigned int		data_cmd_enable;
 	unsigned int		datactrl_mask_ddrmode;
-	bool			sdio;
+	unsigned int		datactrl_mask_sdio;
+	bool			st_sdio;
 	bool			st_clkdiv;
 	bool			blksz_datactrl16;
 	bool			blksz_datactrl4;
@@ -98,6 +102,7 @@ struct variant_data {
 	bool			pwrreg_nopower;
 	bool			explicit_mclk_control;
 	bool			qcom_fifo;
+	bool			qcom_dml;
 	bool			reversed_irq_handling;
 };
 
@@ -133,7 +138,8 @@ static struct variant_data variant_u300 = {
 	.clkreg_enable		= MCI_ST_U300_HWFCEN,
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.datalength_bits	= 16,
-	.sdio			= true,
+	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.st_sdio			= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
 	.f_max			= 100000000,
 	.signal_direction	= true,
@@ -146,7 +152,8 @@ static struct variant_data variant_nomadik = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.datalength_bits	= 24,
-	.sdio			= true,
+	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
 	.f_max			= 100000000,
@@ -163,7 +170,8 @@ static struct variant_data variant_ux500 = {
 	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
 	.datalength_bits	= 24,
-	.sdio			= true,
+	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
 	.f_max			= 100000000,
@@ -182,7 +190,8 @@ static struct variant_data variant_ux500v2 = {
 	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
 	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 24,
-	.sdio			= true,
+	.datactrl_mask_sdio	= MCI_ST_DPSM_SDIOEN,
+	.st_sdio		= true,
 	.st_clkdiv		= true,
 	.blksz_datactrl16	= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
@@ -208,6 +217,7 @@ static struct variant_data variant_qcom = {
 	.f_max			= 208000000,
 	.explicit_mclk_control	= true,
 	.qcom_fifo		= true,
+	.qcom_dml		= true,
 };
 
 static int mmci_card_busy(struct mmc_host *mmc)
@@ -421,6 +431,7 @@ static void mmci_dma_setup(struct mmci_host *host)
 {
 	const char *rxname, *txname;
 	dma_cap_mask_t mask;
+	struct variant_data *variant = host->variant;
 
 	host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
 	host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
@@ -471,6 +482,10 @@ static void mmci_dma_setup(struct mmci_host *host)
 		if (max_seg_size < host->mmc->max_seg_size)
 			host->mmc->max_seg_size = max_seg_size;
 	}
+
+	if (variant->qcom_dml && host->dma_rx_channel && host->dma_tx_channel)
+		if (dml_hw_init(host, host->mmc->parent->of_node))
+			variant->qcom_dml = false;
 }
 
 /*
@@ -572,6 +587,7 @@ static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
 	struct dma_async_tx_descriptor *desc;
 	enum dma_data_direction buffer_dirn;
 	int nr_sg;
+	unsigned long flags = DMA_CTRL_ACK;
 
 	if (data->flags & MMC_DATA_READ) {
 		conf.direction = DMA_DEV_TO_MEM;
@@ -596,9 +612,12 @@ static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
 	if (nr_sg == 0)
 		return -EINVAL;
 
+	if (host->variant->qcom_dml)
+		flags |= DMA_PREP_INTERRUPT;
+
 	dmaengine_slave_config(chan, &conf);
 	desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg,
-					    conf.direction, DMA_CTRL_ACK);
+					    conf.direction, flags);
 	if (!desc)
 		goto unmap_exit;
 
@@ -647,6 +666,9 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
 	dmaengine_submit(host->dma_desc_current);
 	dma_async_issue_pending(host->dma_current);
 
+	if (host->variant->qcom_dml)
+		dml_start_xfer(host, data);
+
 	datactrl |= MCI_DPSM_DMAENABLE;
 
 	/* Trigger the DMA transfer */
@@ -792,32 +814,26 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	if (data->flags & MMC_DATA_READ)
 		datactrl |= MCI_DPSM_DIRECTION;
 
-	/* The ST Micro variants has a special bit to enable SDIO */
-	if (variant->sdio && host->mmc->card)
-		if (mmc_card_sdio(host->mmc->card)) {
-			/*
-			 * The ST Micro variants has a special bit
-			 * to enable SDIO.
-			 */
-			u32 clk;
+	if (host->mmc->card && mmc_card_sdio(host->mmc->card)) {
+		u32 clk;
 
-			datactrl |= MCI_ST_DPSM_SDIOEN;
+		datactrl |= variant->datactrl_mask_sdio;
 
-			/*
-			 * The ST Micro variant for SDIO small write transfers
-			 * needs to have clock H/W flow control disabled,
-			 * otherwise the transfer will not start. The threshold
-			 * depends on the rate of MCLK.
-			 */
-			if (data->flags & MMC_DATA_WRITE &&
-			    (host->size < 8 ||
-			     (host->size <= 8 && host->mclk > 50000000)))
-				clk = host->clk_reg & ~variant->clkreg_enable;
-			else
-				clk = host->clk_reg | variant->clkreg_enable;
+		/*
+		 * The ST Micro variant for SDIO small write transfers
+		 * needs to have clock H/W flow control disabled,
+		 * otherwise the transfer will not start. The threshold
+		 * depends on the rate of MCLK.
+		 */
+		if (variant->st_sdio && data->flags & MMC_DATA_WRITE &&
+		    (host->size < 8 ||
+		     (host->size <= 8 && host->mclk > 50000000)))
+			clk = host->clk_reg & ~variant->clkreg_enable;
+		else
+			clk = host->clk_reg | variant->clkreg_enable;
 
-			mmci_write_clkreg(host, clk);
-		}
+		mmci_write_clkreg(host, clk);
+	}
 
 	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 ||
 	    host->mmc->ios.timing == MMC_TIMING_MMC_DDR52)
@@ -1658,16 +1674,35 @@ static int mmci_probe(struct amba_device *dev,
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
-	/* If DT, cd/wp gpios must be supplied through it. */
-	if (!np && gpio_is_valid(plat->gpio_cd)) {
-		ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0);
-		if (ret)
-			goto clk_disable;
-	}
-	if (!np && gpio_is_valid(plat->gpio_wp)) {
-		ret = mmc_gpio_request_ro(mmc, plat->gpio_wp);
-		if (ret)
-			goto clk_disable;
+	/*
+	 * If:
+	 * - not using DT but using a descriptor table, or
+	 * - using a table of descriptors ALONGSIDE DT, or
+	 * look up these descriptors named "cd" and "wp" right here, fail
+	 * silently of these do not exist and proceed to try platform data
+	 */
+	if (!np) {
+		ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+		if (ret < 0) {
+			if (ret == -EPROBE_DEFER)
+				goto clk_disable;
+			else if (gpio_is_valid(plat->gpio_cd)) {
+				ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0);
+				if (ret)
+					goto clk_disable;
+			}
+		}
+
+		ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL);
+		if (ret < 0) {
+			if (ret == -EPROBE_DEFER)
+				goto clk_disable;
+			else if (gpio_is_valid(plat->gpio_wp)) {
+				ret = mmc_gpio_request_ro(mmc, plat->gpio_wp);
+				if (ret)
+					goto clk_disable;
+			}
+		}
 	}
 
 	ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED,
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
new file mode 100644
index 000000000000..2b7fc3764803
--- /dev/null
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -0,0 +1,177 @@
+/*
+ *
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/bitops.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include "mmci.h"
+
+/* Registers */
+#define DML_CONFIG			0x00
+#define PRODUCER_CRCI_MSK		GENMASK(1, 0)
+#define PRODUCER_CRCI_DISABLE		0
+#define PRODUCER_CRCI_X_SEL		BIT(0)
+#define PRODUCER_CRCI_Y_SEL		BIT(1)
+#define CONSUMER_CRCI_MSK		GENMASK(3, 2)
+#define CONSUMER_CRCI_DISABLE		0
+#define CONSUMER_CRCI_X_SEL		BIT(2)
+#define CONSUMER_CRCI_Y_SEL		BIT(3)
+#define PRODUCER_TRANS_END_EN		BIT(4)
+#define BYPASS				BIT(16)
+#define DIRECT_MODE			BIT(17)
+#define INFINITE_CONS_TRANS		BIT(18)
+
+#define DML_SW_RESET			0x08
+#define DML_PRODUCER_START		0x0c
+#define DML_CONSUMER_START		0x10
+#define DML_PRODUCER_PIPE_LOGICAL_SIZE	0x14
+#define DML_CONSUMER_PIPE_LOGICAL_SIZE	0x18
+#define DML_PIPE_ID			0x1c
+#define PRODUCER_PIPE_ID_SHFT		0
+#define PRODUCER_PIPE_ID_MSK		GENMASK(4, 0)
+#define CONSUMER_PIPE_ID_SHFT		16
+#define CONSUMER_PIPE_ID_MSK		GENMASK(20, 16)
+
+#define DML_PRODUCER_BAM_BLOCK_SIZE	0x24
+#define DML_PRODUCER_BAM_TRANS_SIZE	0x28
+
+/* other definitions */
+#define PRODUCER_PIPE_LOGICAL_SIZE	4096
+#define CONSUMER_PIPE_LOGICAL_SIZE	4096
+
+#define DML_OFFSET			0x800
+
+void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
+{
+	u32 config;
+	void __iomem *base = host->base + DML_OFFSET;
+
+	if (data->flags & MMC_DATA_READ) {
+		/* Read operation: configure DML for producer operation */
+		/* Set producer CRCI-x and disable consumer CRCI */
+		config = readl_relaxed(base + DML_CONFIG);
+		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL;
+		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DISABLE;
+		writel_relaxed(config, base + DML_CONFIG);
+
+		/* Set the Producer BAM block size */
+		writel_relaxed(data->blksz, base + DML_PRODUCER_BAM_BLOCK_SIZE);
+
+		/* Set Producer BAM Transaction size */
+		writel_relaxed(data->blocks * data->blksz,
+			       base + DML_PRODUCER_BAM_TRANS_SIZE);
+		/* Set Producer Transaction End bit */
+		config = readl_relaxed(base + DML_CONFIG);
+		config |= PRODUCER_TRANS_END_EN;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Trigger producer */
+		writel_relaxed(1, base + DML_PRODUCER_START);
+	} else {
+		/* Write operation: configure DML for consumer operation */
+		/* Set consumer CRCI-x and disable producer CRCI*/
+		config = readl_relaxed(base + DML_CONFIG);
+		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL;
+		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DISABLE;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Clear Producer Transaction End bit */
+		config = readl_relaxed(base + DML_CONFIG);
+		config &= ~PRODUCER_TRANS_END_EN;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Trigger consumer */
+		writel_relaxed(1, base + DML_CONSUMER_START);
+	}
+
+	/* make sure the dml is configured before dma is triggered */
+	wmb();
+}
+
+static int of_get_dml_pipe_index(struct device_node *np, const char *name)
+{
+	int index;
+	struct of_phandle_args	dma_spec;
+
+	index = of_property_match_string(np, "dma-names", name);
+
+	if (index < 0)
+		return -ENODEV;
+
+	if (of_parse_phandle_with_args(np, "dmas", "#dma-cells", index,
+				       &dma_spec))
+		return -ENODEV;
+
+	if (dma_spec.args_count)
+		return dma_spec.args[0];
+
+	return -ENODEV;
+}
+
+/* Initialize the dml hardware connected to SD Card controller */
+int dml_hw_init(struct mmci_host *host, struct device_node *np)
+{
+	u32 config;
+	void __iomem *base;
+	int consumer_id, producer_id;
+
+	consumer_id = of_get_dml_pipe_index(np, "tx");
+	producer_id = of_get_dml_pipe_index(np, "rx");
+
+	if (producer_id < 0 || consumer_id < 0)
+		return -ENODEV;
+
+	base = host->base + DML_OFFSET;
+
+	/* Reset the DML block */
+	writel_relaxed(1, base + DML_SW_RESET);
+
+	/* Disable the producer and consumer CRCI */
+	config = (PRODUCER_CRCI_DISABLE | CONSUMER_CRCI_DISABLE);
+	/*
+	 * Disable the bypass mode. Bypass mode will only be used
+	 * if data transfer is to happen in PIO mode and don't
+	 * want the BAM interface to connect with SDCC-DML.
+	 */
+	config &= ~BYPASS;
+	/*
+	 * Disable direct mode as we don't DML to MASTER the AHB bus.
+	 * BAM connected with DML should MASTER the AHB bus.
+	 */
+	config &= ~DIRECT_MODE;
+	/*
+	 * Disable infinite mode transfer as we won't be doing any
+	 * infinite size data transfers. All data transfer will be
+	 * of finite data size.
+	 */
+	config &= ~INFINITE_CONS_TRANS;
+	writel_relaxed(config, base + DML_CONFIG);
+
+	/*
+	 * Initialize the logical BAM pipe size for producer
+	 * and consumer.
+	 */
+	writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
+		       base + DML_PRODUCER_PIPE_LOGICAL_SIZE);
+	writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
+		       base + DML_CONSUMER_PIPE_LOGICAL_SIZE);
+
+	/* Initialize Producer/consumer pipe id */
+	writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT),
+		       base + DML_PIPE_ID);
+
+	/* Make sure dml intialization is finished */
+	mb();
+
+	return 0;
+}
diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h
new file mode 100644
index 000000000000..6e405d09d534
--- /dev/null
+++ b/drivers/mmc/host/mmci_qcom_dml.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __MMC_QCOM_DML_H__
+#define __MMC_QCOM_DML_H__
+
+#ifdef CONFIG_MMC_QCOM_DML
+int dml_hw_init(struct mmci_host *host, struct device_node *np);
+void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);
+#else
+static inline int dml_hw_init(struct mmci_host *host, struct device_node *np)
+{
+	return -ENOSYS;
+}
+static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
+{
+}
+#endif /* CONFIG_MMC_QCOM_DML */
+
+#endif /* __MMC_QCOM_DML_H__ */
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index b4b1efbf6c16..f3e18d08e852 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -717,7 +717,6 @@ static struct platform_driver moxart_mmc_driver = {
 	.remove     = moxart_remove,
 	.driver     = {
 		.name		= "mmc-moxart",
-		.owner		= THIS_MODULE,
 		.of_match_table	= moxart_mmc_match,
 	},
 };
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index ed1cb93c3784..ad111422ad55 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -1238,7 +1238,6 @@ static struct platform_driver mxcmci_driver = {
 	.id_table	= mxcmci_devtype,
 	.driver		= {
 		.name		= DRIVER_NAME,
-		.owner		= THIS_MODULE,
 		.pm	= &mxcmci_pm_ops,
 		.of_match_table	= mxcmci_of_match,
 	}
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 140885a5a4e7..cd74e5143c36 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -735,7 +735,6 @@ static struct platform_driver mxs_mmc_driver = {
 	.id_table	= mxs_ssp_ids,
 	.driver		= {
 		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &mxs_mmc_pm_ops,
 #endif
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 81974ecdfcbc..68dd6c79c378 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1494,7 +1494,6 @@ static struct platform_driver mmc_omap_driver = {
 	.remove		= mmc_omap_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(mmc_omap_match),
 	},
 };
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 965672663ef0..df27bb4fc098 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1829,7 +1829,17 @@ static int omap_hsmmc_disable_fclk(struct mmc_host *mmc)
 	return 0;
 }
 
-static const struct mmc_host_ops omap_hsmmc_ops = {
+static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
+				     unsigned int direction, int blk_size)
+{
+	/* This controller can't do multiblock reads due to hw bugs */
+	if (direction == MMC_DATA_READ)
+		return 1;
+
+	return blk_size;
+}
+
+static struct mmc_host_ops omap_hsmmc_ops = {
 	.enable = omap_hsmmc_enable_fclk,
 	.disable = omap_hsmmc_disable_fclk,
 	.post_req = omap_hsmmc_post_req,
@@ -2101,7 +2111,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) {
 		dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n");
-		mmc->caps2 |= MMC_CAP2_NO_MULTI_READ;
+		omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk;
 	}
 
 	pm_runtime_enable(host->dev);
@@ -2489,7 +2499,6 @@ static struct platform_driver omap_hsmmc_driver = {
 	.remove		= omap_hsmmc_remove,
 	.driver		= {
 		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
 		.pm = &omap_hsmmc_dev_pm_ops,
 		.of_match_table = of_match_ptr(omap_mmc_of_match),
 	},
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 32fe11323f39..1b6d0bfe35f5 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -474,7 +474,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		unsigned int clk = rate / ios->clock;
 
 		if (host->clkrt == CLKRT_OFF)
-			clk_enable(host->clk);
+			clk_prepare_enable(host->clk);
 
 		if (ios->clock == 26000000) {
 			/* to support 26MHz */
@@ -501,7 +501,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		pxamci_stop_clock(host);
 		if (host->clkrt != CLKRT_OFF) {
 			host->clkrt = CLKRT_OFF;
-			clk_disable(host->clk);
+			clk_disable_unprepare(host->clk);
 		}
 	}
 
@@ -885,7 +885,6 @@ static struct platform_driver pxamci_driver = {
 	.remove		= pxamci_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
 	},
 };
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index dfde4a210238..c70b602f8f1e 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -412,6 +412,13 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 	}
 
 	if (rsp_type == SD_RSP_TYPE_R2) {
+		/*
+		 * The controller offloads the last byte {CRC-7, end bit 1'b1}
+		 * of response type R2. Assign dummy CRC, 0, and end bit to the
+		 * byte(ptr[16], goes into the LSB of resp[3] later).
+		 */
+		ptr[16] = 1;
+
 		for (i = 0; i < 4; i++) {
 			cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
 			dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
@@ -1292,6 +1299,7 @@ static void realtek_init_host(struct realtek_pci_sdmmc *host)
 	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
 		MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
 		MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
+	mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
 	mmc->max_current_330 = 400;
 	mmc->max_current_180 = 800;
 	mmc->ops = &realtek_pci_sdmmc_ops;
@@ -1416,7 +1424,6 @@ static struct platform_driver rtsx_pci_sdmmc_driver = {
 	.remove		= rtsx_pci_sdmmc_drv_remove,
 	.id_table       = rtsx_pci_sdmmc_ids,
 	.driver		= {
-		.owner	= THIS_MODULE,
 		.name	= DRV_NAME_RTSX_PCI_SDMMC,
 	},
 };
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
index 5d3766e792f0..88af827e086b 100644
--- a/drivers/mmc/host/rtsx_usb_sdmmc.c
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -435,6 +435,13 @@ static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host,
 	}
 
 	if (rsp_type == SD_RSP_TYPE_R2) {
+		/*
+		 * The controller offloads the last byte {CRC-7, end bit 1'b1}
+		 * of response type R2. Assign dummy CRC, 0, and end bit to the
+		 * byte(ptr[16], goes into the LSB of resp[3] later).
+		 */
+		ptr[16] = 1;
+
 		for (i = 0; i < 4; i++) {
 			cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
 			dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
@@ -1329,6 +1336,7 @@ static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
 		MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
 		MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
 		MMC_CAP_NEEDS_POLL;
+	mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
 
 	mmc->max_current_330 = 400;
 	mmc->max_current_180 = 800;
@@ -1445,7 +1453,6 @@ static struct platform_driver rtsx_usb_sdmmc_driver = {
 	.remove		= rtsx_usb_sdmmc_drv_remove,
 	.id_table       = rtsx_usb_sdmmc_ids,
 	.driver		= {
-		.owner	= THIS_MODULE,
 		.name	= "rtsx_usb_sdmmc",
 	},
 };
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index e5516a226362..94cddf381ba3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -985,7 +985,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 		 * one block being transferred. */
 
 		if (data->blocks > 1) {
-			pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
+			pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
+				__func__, data->blksz);
 			return -EINVAL;
 		}
 	}
@@ -1874,7 +1875,6 @@ MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
 static struct platform_driver s3cmci_driver = {
 	.driver	= {
 		.name	= "s3c-sdi",
-		.owner	= THIS_MODULE,
 	},
 	.id_table	= s3cmci_driver_ids,
 	.probe		= s3cmci_probe,
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 8c5337002c51..9cccc0e89b04 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -67,6 +67,8 @@ struct sdhci_acpi_slot {
 	unsigned int	caps2;
 	mmc_pm_flag_t	pm_caps;
 	unsigned int	flags;
+	int (*probe_slot)(struct platform_device *, const char *, const char *);
+	int (*remove_slot)(struct platform_device *);
 };
 
 struct sdhci_acpi_host {
@@ -122,13 +124,67 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {
 	.ops = &sdhci_acpi_ops_int,
 };
 
+static int sdhci_acpi_emmc_probe_slot(struct platform_device *pdev,
+				      const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	if (hid && uid && !strcmp(hid, "80860F14") && !strcmp(uid, "1") &&
+	    sdhci_readl(host, SDHCI_CAPABILITIES) == 0x446cc8b2 &&
+	    sdhci_readl(host, SDHCI_CAPABILITIES_1) == 0x00000807)
+		host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
+
+	return 0;
+}
+
+static int sdhci_acpi_sdio_probe_slot(struct platform_device *pdev,
+				      const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	return 0;
+}
+
+static int sdhci_acpi_sd_probe_slot(struct platform_device *pdev,
+				    const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host || !c->slot)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	return 0;
+}
+
 static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
 	.chip    = &sdhci_acpi_chip_int,
 	.caps    = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
 		   MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
 	.caps2   = MMC_CAP2_HC_ERASE_SZ,
 	.flags   = SDHCI_ACPI_RUNTIME_PM,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
+	.probe_slot	= sdhci_acpi_emmc_probe_slot,
 };
 
 static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
@@ -137,12 +193,15 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
 	.caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
 	.flags   = SDHCI_ACPI_RUNTIME_PM,
 	.pm_caps = MMC_PM_KEEP_POWER,
+	.probe_slot	= sdhci_acpi_sdio_probe_slot,
 };
 
 static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
 	.flags   = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
 		   SDHCI_ACPI_RUNTIME_PM,
-	.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
+	.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+		   SDHCI_QUIRK2_STOP_WITH_TC,
+	.probe_slot	= sdhci_acpi_sd_probe_slot,
 };
 
 struct sdhci_acpi_uid_slot {
@@ -156,6 +215,7 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
 	{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd   },
 	{ "80860F16" , NULL, &sdhci_acpi_slot_int_sd   },
 	{ "INT33BB"  , "2" , &sdhci_acpi_slot_int_sdio },
+	{ "INT33BB"  , "3" , &sdhci_acpi_slot_int_sd },
 	{ "INT33C6"  , NULL, &sdhci_acpi_slot_int_sdio },
 	{ "INT3436"  , NULL, &sdhci_acpi_slot_int_sdio },
 	{ "PNP0D40"  },
@@ -173,8 +233,8 @@ static const struct acpi_device_id sdhci_acpi_ids[] = {
 };
 MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
 
-static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid,
-								const char *uid)
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid,
+							 const char *uid)
 {
 	const struct sdhci_acpi_uid_slot *u;
 
@@ -189,24 +249,6 @@ static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid,
 	return NULL;
 }
 
-static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle,
-							 const char *hid)
-{
-	const struct sdhci_acpi_slot *slot;
-	struct acpi_device_info *info;
-	const char *uid = NULL;
-	acpi_status status;
-
-	status = acpi_get_object_info(handle, &info);
-	if (!ACPI_FAILURE(status) && (info->valid & ACPI_VALID_UID))
-		uid = info->unique_id.string;
-
-	slot = sdhci_acpi_get_slot_by_ids(hid, uid);
-
-	kfree(info);
-	return slot;
-}
-
 static int sdhci_acpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -217,6 +259,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	struct resource *iomem;
 	resource_size_t len;
 	const char *hid;
+	const char *uid;
 	int err;
 
 	if (acpi_bus_get_device(handle, &device))
@@ -226,6 +269,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	hid = acpi_device_hid(device);
+	uid = device->pnp.unique_id;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iomem)
@@ -244,7 +288,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 
 	c = sdhci_priv(host);
 	c->host = host;
-	c->slot = sdhci_acpi_get_slot(handle, hid);
+	c->slot = sdhci_acpi_get_slot(hid, uid);
 	c->pdev = pdev;
 	c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);
 
@@ -277,6 +321,11 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	}
 
 	if (c->slot) {
+		if (c->slot->probe_slot) {
+			err = c->slot->probe_slot(pdev, hid, uid);
+			if (err)
+				goto err_free;
+		}
 		if (c->slot->chip) {
 			host->ops            = c->slot->chip->ops;
 			host->quirks        |= c->slot->chip->quirks;
@@ -297,7 +346,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
 		bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
 
-		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0)) {
+		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL)) {
 			dev_warn(dev, "failed to setup card detect gpio\n");
 			c->use_runtime_pm = false;
 		}
@@ -334,6 +383,9 @@ static int sdhci_acpi_remove(struct platform_device *pdev)
 		pm_runtime_put_noidle(dev);
 	}
 
+	if (c->slot && c->slot->remove_slot)
+		c->slot->remove_slot(pdev);
+
 	dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
 	sdhci_remove_host(c->host, dead);
 	sdhci_free_host(c->host);
@@ -385,20 +437,13 @@ static int sdhci_acpi_runtime_idle(struct device *dev)
 	return 0;
 }
 
-#else
-
-#define sdhci_acpi_runtime_suspend	NULL
-#define sdhci_acpi_runtime_resume	NULL
-#define sdhci_acpi_runtime_idle		NULL
-
 #endif
 
 static const struct dev_pm_ops sdhci_acpi_pm_ops = {
 	.suspend		= sdhci_acpi_suspend,
 	.resume			= sdhci_acpi_resume,
-	.runtime_suspend	= sdhci_acpi_runtime_suspend,
-	.runtime_resume		= sdhci_acpi_runtime_resume,
-	.runtime_idle		= sdhci_acpi_runtime_idle,
+	SET_RUNTIME_PM_OPS(sdhci_acpi_runtime_suspend,
+			sdhci_acpi_runtime_resume, sdhci_acpi_runtime_idle)
 };
 
 static struct platform_driver sdhci_acpi_driver = {
diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index dd780c315a63..e7e4fbdcbfe0 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -225,7 +225,7 @@ static struct sdhci_pltfm_data sdhci_pltfm_data_kona = {
 		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 };
 
-static struct __initconst of_device_id sdhci_bcm_kona_of_match[] = {
+static const struct of_device_id sdhci_bcm_kona_of_match[] = {
 	{ .compatible = "brcm,kona-sdhci"},
 	{ .compatible = "bcm,kona-sdhci"}, /* deprecated name */
 	{}
@@ -359,7 +359,6 @@ static int sdhci_bcm_kona_remove(struct platform_device *pdev)
 static struct platform_driver sdhci_bcm_kona_driver = {
 	.driver		= {
 		.name	= "sdhci-kona",
-		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PLTFM_PMOPS,
 		.of_match_table = sdhci_bcm_kona_of_match,
 	},
diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
index 46af9a439d7b..439d259fdf1d 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -194,7 +194,6 @@ MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
 static struct platform_driver bcm2835_sdhci_driver = {
 	.driver = {
 		.name = "sdhci-bcm2835",
-		.owner = THIS_MODULE,
 		.of_match_table = bcm2835_sdhci_of_match,
 		.pm = SDHCI_PLTFM_PMOPS,
 	},
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 14b74075589a..a7935a8d0922 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -106,7 +106,6 @@ static int sdhci_cns3xxx_remove(struct platform_device *pdev)
 static struct platform_driver sdhci_cns3xxx_driver = {
 	.driver		= {
 		.name	= "sdhci-cns3xxx",
-		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},
 	.probe		= sdhci_cns3xxx_probe,
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index e6278ec007d7..ca969d271a27 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -146,7 +146,6 @@ MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table);
 static struct platform_driver sdhci_dove_driver = {
 	.driver		= {
 		.name	= "sdhci-dove",
-		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PLTFM_PMOPS,
 		.of_match_table = sdhci_dove_of_match_table,
 	},
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ccec0e32590f..587ee0edeb57 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -880,6 +880,24 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
+static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+	return esdhc_is_usdhc(imx_data) ? 1 << 28 : 1 << 27;
+}
+
+static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+	/* use maximum timeout counter */
+	sdhci_writeb(host, esdhc_is_usdhc(imx_data) ? 0xF : 0xE,
+			SDHCI_TIMEOUT_CONTROL);
+}
+
 static struct sdhci_ops sdhci_esdhc_ops = {
 	.read_l = esdhc_readl_le,
 	.read_w = esdhc_readw_le,
@@ -889,7 +907,9 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 	.set_clock = esdhc_pltfm_set_clock,
 	.get_max_clock = esdhc_pltfm_get_max_clock,
 	.get_min_clock = esdhc_pltfm_get_min_clock,
+	.get_max_timeout_count = esdhc_get_max_timeout_count,
 	.get_ro = esdhc_pltfm_get_ro,
+	.set_timeout = esdhc_set_timeout,
 	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.set_uhs_signaling = esdhc_set_uhs_signaling,
 	.reset = esdhc_reset,
@@ -1207,7 +1227,6 @@ static const struct dev_pm_ops sdhci_esdhc_pmops = {
 static struct platform_driver sdhci_esdhc_imx_driver = {
 	.driver		= {
 		.name	= "sdhci-esdhc-imx",
-		.owner	= THIS_MODULE,
 		.of_match_table = imx_esdhc_dt_ids,
 		.pm	= &sdhci_esdhc_pmops,
 	},
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 1a6661ed6205..30804385af6d 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -46,24 +46,6 @@
 #define CMUX_SHIFT_PHASE_SHIFT	24
 #define CMUX_SHIFT_PHASE_MASK	(7 << CMUX_SHIFT_PHASE_SHIFT)
 
-static const u32 tuning_block_64[] = {
-	0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe,
-	0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777,
-	0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff,
-	0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7
-};
-
-static const u32 tuning_block_128[] = {
-	0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc,
-	0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff,
-	0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff,
-	0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb,
-	0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc,
-	0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff,
-	0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb,
-	0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77
-};
-
 struct sdhci_msm_host {
 	struct platform_device *pdev;
 	void __iomem *core_mem;	/* MSM SDCC mapped address */
@@ -358,8 +340,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int tuning_seq_cnt = 3;
 	u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
-	const u32 *tuning_block_pattern = tuning_block_64;
-	int size = sizeof(tuning_block_64);	/* Pattern size in bytes */
+	const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
+	int size = sizeof(tuning_blk_pattern_4bit);
 	int rc;
 	struct mmc_host *mmc = host->mmc;
 	struct mmc_ios ios = host->mmc->ios;
@@ -375,8 +357,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
 
 	if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
 	    (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
-		tuning_block_pattern = tuning_block_128;
-		size = sizeof(tuning_block_128);
+		tuning_block_pattern = tuning_blk_pattern_8bit;
+		size = sizeof(tuning_blk_pattern_8bit);
 	}
 
 	data_buf = kmalloc(size, GFP_KERNEL);
@@ -610,7 +592,6 @@ static struct platform_driver sdhci_msm_driver = {
 	.remove = sdhci_msm_remove,
 	.driver = {
 		   .name = "sdhci_msm",
-		   .owner = THIS_MODULE,
 		   .of_match_table = sdhci_msm_dt_match,
 	},
 };
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 5bd1092310f2..981d66e5c023 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -213,7 +213,6 @@ MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
 static struct platform_driver sdhci_arasan_driver = {
 	.driver = {
 		.name = "sdhci-arasan",
-		.owner = THIS_MODULE,
 		.of_match_table = sdhci_arasan_of_match,
 		.pm = &sdhci_arasan_dev_pm_ops,
 	},
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 8be4dcfb49a0..8872c85c63d4 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -388,7 +388,6 @@ MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
 static struct platform_driver sdhci_esdhc_driver = {
 	.driver = {
 		.name = "sdhci-esdhc",
-		.owner = THIS_MODULE,
 		.of_match_table = sdhci_esdhc_of_match,
 		.pm = ESDHC_PMOPS,
 	},
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index b341661369a2..be479279a1d5 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -89,7 +89,6 @@ MODULE_DEVICE_TABLE(of, sdhci_hlwd_of_match);
 static struct platform_driver sdhci_hlwd_driver = {
 	.driver = {
 		.name = "sdhci-hlwd",
-		.owner = THIS_MODULE,
 		.of_match_table = sdhci_hlwd_of_match,
 		.pm = SDHCI_PLTFM_PMOPS,
 	},
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index c3a1debc9289..61192973e7cb 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/pm_runtime.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/sdhci-pci-data.h>
 
 #include "sdhci.h"
@@ -271,6 +272,8 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 				 MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
 	slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
 	slot->hw_reset = sdhci_pci_int_hw_reset;
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
+		slot->host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
 	return 0;
 }
 
@@ -280,22 +283,35 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
 	return 0;
 }
 
+static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
+{
+	slot->cd_con_id = NULL;
+	slot->cd_idx = 0;
+	slot->cd_override_level = true;
+	return 0;
+}
+
 static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
 	.allow_runtime_pm = true,
 	.probe_slot	= byt_emmc_probe_slot,
-	.quirks2	= SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2	= SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			  SDHCI_QUIRK2_STOP_WITH_TC,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
-	.quirks2	= SDHCI_QUIRK2_HOST_OFF_CARD_ON,
+	.quirks2	= SDHCI_QUIRK2_HOST_OFF_CARD_ON |
+			SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.allow_runtime_pm = true,
 	.probe_slot	= byt_sdio_probe_slot,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
-	.quirks2	= SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
+	.quirks2	= SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+			  SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			  SDHCI_QUIRK2_STOP_WITH_TC,
 	.allow_runtime_pm = true,
 	.own_cd_for_runtime_pm = true,
+	.probe_slot	= byt_sd_probe_slot,
 };
 
 /* Define Host controllers for Intel Merrifield platform */
@@ -317,7 +333,9 @@ static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot)
 
 static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
-	.quirks2	= SDHCI_QUIRK2_BROKEN_HS200,
+	.quirks2	= SDHCI_QUIRK2_BROKEN_HS200 |
+			SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.allow_runtime_pm = true,
 	.probe_slot	= intel_mrfl_mmc_probe_slot,
 };
 
@@ -876,6 +894,29 @@ static const struct pci_device_id pci_ids[] = {
 		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_emmc,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BSW_EMMC,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_emmc,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BSW_SDIO,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_sdio,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BSW_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_byt_sd,
+	},
 
 	{
 		.vendor		= PCI_VENDOR_ID_INTEL,
@@ -1269,20 +1310,13 @@ static int sdhci_pci_runtime_idle(struct device *dev)
 	return 0;
 }
 
-#else
-
-#define sdhci_pci_runtime_suspend	NULL
-#define sdhci_pci_runtime_resume	NULL
-#define sdhci_pci_runtime_idle		NULL
-
 #endif
 
 static const struct dev_pm_ops sdhci_pci_pm_ops = {
 	.suspend = sdhci_pci_suspend,
 	.resume = sdhci_pci_resume,
-	.runtime_suspend = sdhci_pci_runtime_suspend,
-	.runtime_resume = sdhci_pci_runtime_resume,
-	.runtime_idle = sdhci_pci_runtime_idle,
+	SET_RUNTIME_PM_OPS(sdhci_pci_runtime_suspend,
+			sdhci_pci_runtime_resume, sdhci_pci_runtime_idle)
 };
 
 /*****************************************************************************\
@@ -1332,6 +1366,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 	slot->pci_bar = bar;
 	slot->rst_n_gpio = -EINVAL;
 	slot->cd_gpio = -EINVAL;
+	slot->cd_idx = -1;
 
 	/* Retrieve platform data if there is any */
 	if (*sdhci_pci_get_data)
@@ -1390,6 +1425,13 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 	host->mmc->slotno = slotno;
 	host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
 
+	if (slot->cd_idx >= 0 &&
+	    mmc_gpiod_request_cd(host->mmc, slot->cd_con_id, slot->cd_idx,
+				 slot->cd_override_level, 0, NULL)) {
+		dev_warn(&pdev->dev, "failed to setup card detect gpio\n");
+		slot->cd_idx = -1;
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto remove;
@@ -1402,7 +1444,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 	 * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
 	 */
 	if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
-	    !gpio_is_valid(slot->cd_gpio))
+	    !gpio_is_valid(slot->cd_gpio) && slot->cd_idx < 0)
 		chip->allow_runtime_pm = false;
 
 	return slot;
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index c101477ef3be..d57c3d169914 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -11,6 +11,9 @@
 #define PCI_DEVICE_ID_INTEL_BYT_SDIO	0x0f15
 #define PCI_DEVICE_ID_INTEL_BYT_SD	0x0f16
 #define PCI_DEVICE_ID_INTEL_BYT_EMMC2	0x0f50
+#define PCI_DEVICE_ID_INTEL_BSW_EMMC	0x2294
+#define PCI_DEVICE_ID_INTEL_BSW_SDIO	0x2295
+#define PCI_DEVICE_ID_INTEL_BSW_SD	0x2296
 #define PCI_DEVICE_ID_INTEL_MRFL_MMC	0x1190
 #define PCI_DEVICE_ID_INTEL_CLV_SDIO0	0x08f9
 #define PCI_DEVICE_ID_INTEL_CLV_SDIO1	0x08fa
@@ -61,6 +64,10 @@ struct sdhci_pci_slot {
 	int			cd_gpio;
 	int			cd_irq;
 
+	char			*cd_con_id;
+	int			cd_idx;
+	bool			cd_override_level;
+
 	void (*hw_reset)(struct sdhci_host *host);
 };
 
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 7e834fb78f42..c5b01d6bb85d 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -123,7 +123,6 @@ struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
 				    size_t priv_size)
 {
 	struct sdhci_host *host;
-	struct device_node *np = pdev->dev.of_node;
 	struct resource *iomem;
 	int ret;
 
@@ -136,13 +135,8 @@ struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
 	if (resource_size(iomem) < 0x100)
 		dev_err(&pdev->dev, "Invalid iomem size!\n");
 
-	/* Some PCI-based MFD need the parent here */
-	if (pdev->dev.parent != &platform_bus && !np)
-		host = sdhci_alloc_host(pdev->dev.parent,
-			sizeof(struct sdhci_pltfm_host) + priv_size);
-	else
-		host = sdhci_alloc_host(&pdev->dev,
-			sizeof(struct sdhci_pltfm_host) + priv_size);
+	host = sdhci_alloc_host(&pdev->dev,
+		sizeof(struct sdhci_pltfm_host) + priv_size);
 
 	if (IS_ERR(host)) {
 		ret = PTR_ERR(host);
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 3c0f3c0a1cc8..b4c23e983baf 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -261,7 +261,6 @@ static int sdhci_pxav2_remove(struct platform_device *pdev)
 static struct platform_driver sdhci_pxav2_driver = {
 	.driver		= {
 		.name	= "sdhci-pxav2",
-		.owner	= THIS_MODULE,
 #ifdef CONFIG_OF
 		.of_match_table = sdhci_pxav2_of_match,
 #endif
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 6f842fb8e6b8..5036d7d39529 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -224,12 +224,11 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 
 static const struct sdhci_ops pxav3_sdhci_ops = {
 	.set_clock = sdhci_set_clock,
-	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = pxav3_reset,
-	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.set_uhs_signaling = pxav3_set_uhs_signaling,
 };
 
 static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
@@ -381,11 +380,11 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_of_parse:
-err_cd_req:
 err_add_host:
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+err_of_parse:
+err_cd_req:
 	clk_disable_unprepare(clk);
 err_clk_get:
 err_mbus_win:
@@ -492,7 +491,6 @@ static struct platform_driver sdhci_pxav3_driver = {
 #ifdef CONFIG_OF
 		.of_match_table = sdhci_pxav3_of_match,
 #endif
-		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PXAV3_PMOPS,
 	},
 	.probe		= sdhci_pxav3_probe,
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index fa5954a05449..0ce6eb17deaf 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -606,8 +606,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
-		pm_runtime_forbid(&pdev->dev);
-		pm_runtime_get_noresume(&pdev->dev);
 		goto err_req_regs;
 	}
 
@@ -618,6 +616,8 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	return 0;
 
  err_req_regs:
+	pm_runtime_disable(&pdev->dev);
+
  err_no_busclks:
 	clk_disable_unprepare(sc->clk_io);
 
@@ -747,7 +747,6 @@ static struct platform_driver sdhci_s3c_driver = {
 	.remove		= sdhci_s3c_remove,
 	.id_table	= sdhci_s3c_driver_ids,
 	.driver		= {
-		.owner	= THIS_MODULE,
 		.name	= "s3c-sdhci",
 		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
 		.pm	= SDHCI_S3C_PMOPS,
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index 17004531d089..dd29d47c07aa 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -15,6 +15,8 @@
 #include <linux/mmc/slot-gpio.h>
 #include "sdhci-pltfm.h"
 
+#define SDHCI_SIRF_8BITBUS BIT(3)
+
 struct sdhci_sirf_priv {
 	struct clk *clk;
 	int gpio_cd;
@@ -27,10 +29,30 @@ static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host)
 	return clk_get_rate(priv->clk);
 }
 
+static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS);
+
+	/*
+	 * CSR atlas7 and prima2 SD host version is not 3.0
+	 * 8bit-width enable bit of CSR SD hosts is 3,
+	 * while stardard hosts use bit 5
+	 */
+	if (width == MMC_BUS_WIDTH_8)
+		ctrl |= SDHCI_SIRF_8BITBUS;
+	else if (width == MMC_BUS_WIDTH_4)
+		ctrl |= SDHCI_CTRL_4BITBUS;
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
 static struct sdhci_ops sdhci_sirf_ops = {
 	.set_clock = sdhci_set_clock,
 	.get_max_clock	= sdhci_sirf_get_max_clk,
-	.set_bus_width = sdhci_set_bus_width,
+	.set_bus_width = sdhci_sirf_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
@@ -94,6 +116,7 @@ static int sdhci_sirf_probe(struct platform_device *pdev)
 				ret);
 			goto err_request_cd;
 		}
+		mmc_gpiod_request_cd_irq(host->mmc);
 	}
 
 	return 0;
@@ -167,7 +190,6 @@ MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
 static struct platform_driver sdhci_sirf_driver = {
 	.driver		= {
 		.name	= "sdhci-sirf",
-		.owner	= THIS_MODULE,
 		.of_match_table = sdhci_sirf_of_match,
 #ifdef CONFIG_PM_SLEEP
 		.pm	= &sdhci_sirf_pm_ops,
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 9d535c7336ef..22e58268545f 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -230,7 +230,6 @@ MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
 static struct platform_driver sdhci_driver = {
 	.driver = {
 		.name	= "sdhci",
-		.owner	= THIS_MODULE,
 		.pm	= &sdhci_pm_ops,
 		.of_match_table = of_match_ptr(sdhci_spear_id_table),
 	},
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 33100d10d176..59797106af93 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -318,7 +318,6 @@ static int sdhci_tegra_remove(struct platform_device *pdev)
 static struct platform_driver sdhci_tegra_driver = {
 	.driver		= {
 		.name	= "sdhci-tegra",
-		.owner	= THIS_MODULE,
 		.of_match_table = sdhci_tegra_dt_match,
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 37b2a9ae52ef..ada1a3ea3a87 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -707,19 +707,28 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 count;
+
+	if (host->ops->set_timeout) {
+		host->ops->set_timeout(host, cmd);
+	} else {
+		count = sdhci_calc_timeout(host, cmd);
+		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+	}
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
 	u8 ctrl;
 	struct mmc_data *data = cmd->data;
 	int ret;
 
 	WARN_ON(host->data);
 
-	if (data || (cmd->flags & MMC_RSP_BUSY)) {
-		count = sdhci_calc_timeout(host, cmd);
-		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
-	}
+	if (data || (cmd->flags & MMC_RSP_BUSY))
+		sdhci_set_timeout(host, cmd);
 
 	if (!data)
 		return;
@@ -1007,6 +1016,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	mod_timer(&host->timer, timeout);
 
 	host->cmd = cmd;
+	host->busy_handle = 0;
 
 	sdhci_prepare_data(host, cmd);
 
@@ -1194,7 +1204,6 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 clock_set:
 	if (real_div)
 		host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
-
 	clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
 	clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
 		<< SDHCI_DIVIDER_HI_SHIFT;
@@ -1357,11 +1366,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
 		/*
 		 * Check if the re-tuning timer has already expired and there
-		 * is no on-going data transfer. If so, we need to execute
-		 * tuning procedure before sending command.
+		 * is no on-going data transfer and DAT0 is not busy. If so,
+		 * we need to execute tuning procedure before sending command.
 		 */
 		if ((host->flags & SDHCI_NEEDS_RETUNING) &&
-		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
+		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ)) &&
+		    (present_state & SDHCI_DATA_0_LVL_MASK)) {
 			if (mmc->card) {
 				/* eMMC uses cmd21 but sd and sdio use cmd19 */
 				tuning_opcode =
@@ -1471,6 +1481,18 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	if (!ios->clock || ios->clock != host->clock) {
 		host->ops->set_clock(host, ios->clock);
 		host->clock = ios->clock;
+
+		if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK &&
+		    host->clock) {
+			host->timeout_clk = host->mmc->actual_clock ?
+						host->mmc->actual_clock / 1000 :
+						host->clock / 1000;
+			host->mmc->max_busy_timeout =
+				host->ops->get_max_timeout_count ?
+				host->ops->get_max_timeout_count(host) :
+				1 << 27;
+			host->mmc->max_busy_timeout /= host->timeout_clk;
+		}
 	}
 
 	sdhci_set_power(host, ios->power_mode, ios->vdd);
@@ -1733,8 +1755,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
 						    3600000);
 			if (ret) {
-				pr_warning("%s: Switching to 3.3V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1746,8 +1768,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (!(ctrl & SDHCI_CTRL_VDD_180))
 			return 0;
 
-		pr_warning("%s: 3.3V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 3.3V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
@@ -1755,8 +1777,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc,
 					1700000, 1950000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.8V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1773,8 +1795,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (ctrl & SDHCI_CTRL_VDD_180)
 			return 0;
 
-		pr_warning("%s: 1.8V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 1.8V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_120:
@@ -1782,8 +1804,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
 						    1300000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.2V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -2203,7 +2225,7 @@ static void sdhci_tuning_timer(unsigned long data)
  *                                                                           *
 \*****************************************************************************/
 
-static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
+static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
 {
 	BUG_ON(intmask == 0);
 
@@ -2241,11 +2263,18 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
 		if (host->cmd->data)
 			DBG("Cannot wait for busy signal when also "
 				"doing a data transfer");
-		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
+		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
+				&& !host->busy_handle) {
+			/* Mark that command complete before busy is ended */
+			host->busy_handle = 1;
 			return;
+		}
 
 		/* The controller does not support the end-of-busy IRQ,
 		 * fall through and take the SDHCI_INT_RESPONSE */
+	} else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
+		   host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
+		*mask &= ~SDHCI_INT_DATA_END;
 	}
 
 	if (intmask & SDHCI_INT_RESPONSE)
@@ -2304,8 +2333,21 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 * above in sdhci_cmd_irq().
 		 */
 		if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
+				host->cmd->error = -ETIMEDOUT;
+				tasklet_schedule(&host->finish_tasklet);
+				return;
+			}
 			if (intmask & SDHCI_INT_DATA_END) {
-				sdhci_finish_command(host);
+				/*
+				 * Some cards handle busy-end interrupt
+				 * before the command completed, so make
+				 * sure we do things in the proper order.
+				 */
+				if (host->busy_handle)
+					sdhci_finish_command(host);
+				else
+					host->busy_handle = 1;
 				return;
 			}
 		}
@@ -2442,7 +2484,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		}
 
 		if (intmask & SDHCI_INT_CMD_MASK)
-			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
+				      &intmask);
 
 		if (intmask & SDHCI_INT_DATA_MASK)
 			sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
@@ -2534,7 +2577,7 @@ void sdhci_enable_irq_wakeups(struct sdhci_host *host)
 }
 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
 
-void sdhci_disable_irq_wakeups(struct sdhci_host *host)
+static void sdhci_disable_irq_wakeups(struct sdhci_host *host)
 {
 	u8 val;
 	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
@@ -2544,7 +2587,6 @@ void sdhci_disable_irq_wakeups(struct sdhci_host *host)
 	val &= ~mask;
 	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
 }
-EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
 
 int sdhci_suspend_host(struct sdhci_host *host)
 {
@@ -2749,6 +2791,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	u32 caps[2] = {0, 0};
 	u32 max_current_caps;
 	unsigned int ocr_avail;
+	unsigned int override_timeout_clk;
 	int ret;
 
 	WARN_ON(host == NULL);
@@ -2762,6 +2805,8 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (debug_quirks2)
 		host->quirks2 = debug_quirks2;
 
+	override_timeout_clk = host->timeout_clk;
+
 	sdhci_do_reset(host, SDHCI_RESET_ALL);
 
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
@@ -2807,8 +2852,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
 		if (host->ops->enable_dma) {
 			if (host->ops->enable_dma(host)) {
-				pr_warning("%s: No suitable DMA "
-					"available. Falling back to PIO.\n",
+				pr_warn("%s: No suitable DMA available - falling back to PIO\n",
 					mmc_hostname(mmc));
 				host->flags &=
 					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@@ -2830,15 +2874,14 @@ int sdhci_add_host(struct sdhci_host *host)
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
 			kfree(host->align_buffer);
-			pr_warning("%s: Unable to allocate ADMA "
-				"buffers. Falling back to standard DMA.\n",
+			pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			host->adma_desc = NULL;
 			host->align_buffer = NULL;
 		} else if (host->adma_addr & 3) {
-			pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
-				   mmc_hostname(mmc));
+			pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
+				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
@@ -2908,25 +2951,30 @@ int sdhci_add_host(struct sdhci_host *host)
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
-	host->timeout_clk =
-		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-	if (host->timeout_clk == 0) {
-		if (host->ops->get_timeout_clock) {
-			host->timeout_clk = host->ops->get_timeout_clock(host);
-		} else if (!(host->quirks &
-				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-			pr_err("%s: Hardware doesn't specify timeout clock "
-			       "frequency.\n", mmc_hostname(mmc));
-			return -ENODEV;
+	if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+		host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
+					SDHCI_TIMEOUT_CLK_SHIFT;
+		if (host->timeout_clk == 0) {
+			if (host->ops->get_timeout_clock) {
+				host->timeout_clk =
+					host->ops->get_timeout_clock(host);
+			} else {
+				pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
+					mmc_hostname(mmc));
+				return -ENODEV;
+			}
 		}
-	}
-	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-		host->timeout_clk *= 1000;
 
-	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-		host->timeout_clk = mmc->f_max / 1000;
+		if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+			host->timeout_clk *= 1000;
 
-	mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
+		mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
+			host->ops->get_max_timeout_count(host) : 1 << 27;
+		mmc->max_busy_timeout /= host->timeout_clk;
+	}
+
+	if (override_timeout_clk)
+		host->timeout_clk = override_timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 	mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
@@ -2998,8 +3046,13 @@ int sdhci_add_host(struct sdhci_host *host)
 		/* SD3.0: SDR104 is supported so (for eMMC) the caps2
 		 * field can be promoted to support HS200.
 		 */
-		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
 			mmc->caps2 |= MMC_CAP2_HS200;
+			if (IS_ERR(mmc->supply.vqmmc) ||
+					!regulator_is_supported_voltage
+					(mmc->supply.vqmmc, 1100000, 1300000))
+				mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
+		}
 	} else if (caps[1] & SDHCI_SUPPORT_SDR50)
 		mmc->caps |= MMC_CAP_UHS_SDR50;
 
@@ -3049,7 +3102,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	 */
 	max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
 	if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
-		u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
+		int curr = regulator_get_current_limit(mmc->supply.vmmc);
 		if (curr > 0) {
 
 			/* convert to SDHCI_MAX_CURRENT format */
@@ -3158,8 +3211,8 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
 				SDHCI_MAX_BLOCK_SHIFT;
 		if (mmc->max_blk_size >= 3) {
-			pr_warning("%s: Invalid maximum block size, "
-				"assuming 512 bytes\n", mmc_hostname(mmc));
+			pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+				mmc_hostname(mmc));
 			mmc->max_blk_size = 0;
 		}
 	}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 4a5cd5e3fa3e..31896a779d4e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -72,6 +72,7 @@
 #define  SDHCI_WRITE_PROTECT	0x00080000
 #define  SDHCI_DATA_LVL_MASK	0x00F00000
 #define   SDHCI_DATA_LVL_SHIFT	20
+#define   SDHCI_DATA_0_LVL_MASK	0x00100000
 
 #define SDHCI_HOST_CONTROL	0x28
 #define  SDHCI_CTRL_LED		0x01
@@ -281,6 +282,9 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	unsigned int	(*get_max_timeout_count)(struct sdhci_host *host);
+	void		(*set_timeout)(struct sdhci_host *host,
+				       struct mmc_command *cmd);
 	void		(*set_bus_width)(struct sdhci_host *host, int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index d11708c815d7..7d9d6a321521 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1553,7 +1553,6 @@ static struct platform_driver sh_mmcif_driver = {
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.pm	= &sh_mmcif_dev_pm_ops,
-		.owner	= THIS_MODULE,
 		.of_match_table = mmcif_of_match,
 	},
 };
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 91058dabd11a..a2e81a1ea6af 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -39,6 +39,7 @@ struct sh_mobile_sdhi_of_data {
 	unsigned long tmio_flags;
 	unsigned long capabilities;
 	unsigned long capabilities2;
+	dma_addr_t dma_rx_offset;
 };
 
 static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
@@ -48,14 +49,16 @@ static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
 };
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
+			  TMIO_MMC_CLK_ACTUAL,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
 };
 
 static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
+			  TMIO_MMC_CLK_ACTUAL,
 	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-	.capabilities2	= MMC_CAP2_NO_MULTI_READ,
+	.dma_rx_offset	= 0x2000,
 };
 
 static const struct of_device_id sh_mobile_sdhi_of_match[] = {
@@ -68,6 +71,9 @@ static const struct of_device_id sh_mobile_sdhi_of_match[] = {
 	{ .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, },
 	{ .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, },
 	{ .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7792", .data = &of_rcar_gen2_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7793", .data = &of_rcar_gen2_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
@@ -132,6 +138,24 @@ static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
 	return 0;
 }
 
+static int sh_mobile_sdhi_multi_io_quirk(struct mmc_card *card,
+					 unsigned int direction, int blk_size)
+{
+	/*
+	 * In Renesas controllers, when performing a
+	 * multiple block read of one or two blocks,
+	 * depending on the timing with which the
+	 * response register is read, the response
+	 * value may not be read properly.
+	 * Use single block read for this HW bug
+	 */
+	if ((direction == MMC_DATA_READ) &&
+	    blk_size == 2)
+		return 1;
+
+	return blk_size;
+}
+
 static void sh_mobile_sdhi_cd_wakeup(const struct platform_device *pdev)
 {
 	mmc_detect_change(platform_get_drvdata(pdev), msecs_to_jiffies(100));
@@ -187,6 +211,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
 	mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
+	mmc_data->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
 	if (p) {
 		mmc_data->flags = p->tmio_flags;
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
@@ -223,11 +248,27 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	 */
 	mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
 
+	/*
+	 * All SDHI have CMD12 controll bit
+	 */
+	mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
+
+	/*
+	 * All SDHI need SDIO_INFO1 reserved bit
+	 */
+	mmc_data->flags |= TMIO_MMC_SDIO_STATUS_QUIRK;
+
+	/*
+	 * All SDHI have DMA control register
+	 */
+	mmc_data->flags |= TMIO_MMC_HAVE_CTL_DMA_REG;
+
 	if (of_id && of_id->data) {
 		const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
 		mmc_data->flags |= of_data->tmio_flags;
 		mmc_data->capabilities |= of_data->capabilities;
 		mmc_data->capabilities2 |= of_data->capabilities2;
+		dma_priv->dma_rx_offset = of_data->dma_rx_offset;
 	}
 
 	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
@@ -332,8 +373,9 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 }
 
 static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_host_suspend, tmio_mmc_host_resume)
-	SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+			pm_runtime_force_resume)
+	SET_PM_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
 			tmio_mmc_host_runtime_resume,
 			NULL)
 };
@@ -341,7 +383,6 @@ static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
 static struct platform_driver sh_mobile_sdhi_driver = {
 	.driver		= {
 		.name	= "sh_mobile_sdhi",
-		.owner	= THIS_MODULE,
 		.pm	= &tmio_mmc_dev_pm_ops,
 		.of_match_table = sh_mobile_sdhi_of_match,
 	},
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 024f67c98cdc..d1663b3c4143 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -990,7 +990,8 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
 	/* 400kHz ~ 50MHz */
 	mmc->f_min		=   400000;
 	mmc->f_max		= 50000000;
-	mmc->caps	       |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+	mmc->caps	       |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				  MMC_CAP_ERASE;
 
 	ret = mmc_of_parse(mmc);
 	if (ret)
@@ -1035,7 +1036,6 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
 static struct platform_driver sunxi_mmc_driver = {
 	.driver = {
 		.name	= "sunxi-mmc",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(sunxi_mmc_of_match),
 	},
 	.probe		= sunxi_mmc_probe,
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index d1760ebcac03..93c4b40df90a 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -952,8 +952,8 @@ static int tifm_sd_probe(struct tifm_dev *sock)
 
 	if (!(TIFM_SOCK_STATE_OCCUPIED
 	      & readl(sock->addr + SOCK_PRESENT_STATE))) {
-		pr_warning("%s : card gone, unexpectedly\n",
-		       dev_name(&sock->dev));
+		pr_warn("%s : card gone, unexpectedly\n",
+			dev_name(&sock->dev));
 		return rc;
 	}
 
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index cfad844730d8..659028ddb8b1 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -30,7 +30,7 @@ static int tmio_mmc_suspend(struct device *dev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int ret;
 
-	ret = tmio_mmc_host_suspend(dev);
+	ret = pm_runtime_force_suspend(dev);
 
 	/* Tell MFD core it can disable us now.*/
 	if (!ret && cell->disable)
@@ -50,7 +50,7 @@ static int tmio_mmc_resume(struct device *dev)
 		ret = cell->resume(pdev);
 
 	if (!ret)
-		ret = tmio_mmc_host_resume(dev);
+		ret = pm_runtime_force_resume(dev);
 
 	return ret;
 }
@@ -135,6 +135,9 @@ static int tmio_mmc_remove(struct platform_device *pdev)
 
 static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
+	SET_PM_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+			tmio_mmc_host_runtime_resume,
+			NULL)
 };
 
 static struct platform_driver tmio_mmc_driver = {
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 100ffe0b2faf..a34ecbe1c1ad 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -40,22 +40,6 @@
 
 struct tmio_mmc_data;
 
-/*
- * We differentiate between the following 3 power states:
- * 1. card slot powered off, controller stopped. This is used, when either there
- *    is no card in the slot, or the card really has to be powered down.
- * 2. card slot powered on, controller stopped. This is used, when a card is in
- *    the slot, but no activity is currently taking place. This is a power-
- *    saving mode with card-state preserved. This state can be entered, e.g.
- *    when MMC clock-gating is used.
- * 3. card slot powered on, controller running. This is the actual active state.
- */
-enum tmio_mmc_power {
-	TMIO_MMC_OFF_STOP,	/* card power off, controller stopped */
-	TMIO_MMC_ON_STOP,	/* card power on, controller stopped */
-	TMIO_MMC_ON_RUN,	/* card power on, controller running */
-};
-
 struct tmio_mmc_host {
 	void __iomem *ctl;
 	struct mmc_command      *cmd;
@@ -63,9 +47,6 @@ struct tmio_mmc_host {
 	struct mmc_data         *data;
 	struct mmc_host         *mmc;
 
-	/* Controller and card power state */
-	enum tmio_mmc_power	power;
-
 	/* Callbacks for clock / power control */
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
@@ -92,15 +73,16 @@ struct tmio_mmc_host {
 	struct delayed_work	delayed_reset_work;
 	struct work_struct	done;
 
-	/* Cache IRQ mask */
+	/* Cache */
 	u32			sdcard_irq_mask;
 	u32			sdio_irq_mask;
+	unsigned int		clk_cache;
 
 	spinlock_t		lock;		/* protect host private data */
 	unsigned long		last_req_ts;
 	struct mutex		ios_lock;	/* protect set_ios() context */
 	bool			native_hotplug;
-	bool			resuming;
+	bool			sdio_irq_enabled;
 };
 
 int tmio_mmc_host_probe(struct tmio_mmc_host **host,
@@ -162,12 +144,7 @@ static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
 }
 #endif
 
-#ifdef CONFIG_PM_SLEEP
-int tmio_mmc_host_suspend(struct device *dev);
-int tmio_mmc_host_resume(struct device *dev);
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 int tmio_mmc_host_runtime_suspend(struct device *dev);
 int tmio_mmc_host_runtime_resume(struct device *dev);
 #endif
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index eb8f1d5c34b1..7d077388b9eb 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -28,10 +28,8 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
 	if (!host->chan_tx || !host->chan_rx)
 		return;
 
-#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
-	/* Switch DMA mode on or off - SuperH specific? */
-	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
-#endif
+	if (host->pdata->flags & TMIO_MMC_HAVE_CTL_DMA_REG)
+		sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
 }
 
 void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
@@ -312,7 +310,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (pdata->dma->chan_priv_rx)
 			cfg.slave_id = pdata->dma->slave_id_rx;
 		cfg.direction = DMA_DEV_TO_MEM;
-		cfg.src_addr = cfg.dst_addr;
+		cfg.src_addr = cfg.dst_addr + pdata->dma->dma_rx_offset;
 		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		cfg.dst_addr = 0;
 		ret = dmaengine_slave_config(host->chan_rx, &cfg);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index faf0924e71cb..250bf8c9f998 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -44,6 +44,7 @@
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mmc/sdio.h>
 #include <linux/scatterlist.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -129,19 +130,28 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 
-	if (enable) {
+	if (enable && !host->sdio_irq_enabled) {
+		/* Keep device active while SDIO irq is enabled */
+		pm_runtime_get_sync(mmc_dev(mmc));
+		host->sdio_irq_enabled = true;
+
 		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
 					~TMIO_SDIO_STAT_IOIRQ;
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
 		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-	} else {
+	} else if (!enable && host->sdio_irq_enabled) {
 		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
 		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
+
+		host->sdio_irq_enabled = false;
+		pm_runtime_mark_last_busy(mmc_dev(mmc));
+		pm_runtime_put_autosuspend(mmc_dev(mmc));
 	}
 }
 
-static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
+				unsigned int new_clock)
 {
 	u32 clk = 0, clock;
 
@@ -149,7 +159,11 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 		for (clock = host->mmc->f_min, clk = 0x80000080;
 			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-		clk |= 0x100;
+
+		/* 1/1 clock is option */
+		if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
+		    ((clk >> 22) & 0x1))
+			clk |= 0xff;
 	}
 
 	if (host->set_clk_div)
@@ -245,6 +259,9 @@ static void tmio_mmc_reset_work(struct work_struct *work)
 
 	tmio_mmc_abort_dma(host);
 	mmc_request_done(host->mmc, mrq);
+
+	pm_runtime_mark_last_busy(mmc_dev(host->mmc));
+	pm_runtime_put_autosuspend(mmc_dev(host->mmc));
 }
 
 /* called with host->lock held, interrupts disabled */
@@ -274,6 +291,9 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 		tmio_mmc_abort_dma(host);
 
 	mmc_request_done(host->mmc, mrq);
+
+	pm_runtime_mark_last_busy(mmc_dev(host->mmc));
+	pm_runtime_put_autosuspend(mmc_dev(host->mmc));
 }
 
 static void tmio_mmc_done_work(struct work_struct *work)
@@ -295,6 +315,7 @@ static void tmio_mmc_done_work(struct work_struct *work)
 #define TRANSFER_READ  0x1000
 #define TRANSFER_MULTI 0x2000
 #define SECURITY_CMD   0x4000
+#define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */
 
 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 {
@@ -331,6 +352,14 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 		if (data->blocks > 1) {
 			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
 			c |= TRANSFER_MULTI;
+
+			/*
+			 * Disable auto CMD12 at IO_RW_EXTENDED when
+			 * multiple block transfer
+			 */
+			if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) &&
+			    (cmd->opcode == SD_IO_RW_EXTENDED))
+				c |= NO_CMD12_ISSUE;
 		}
 		if (data->flags & MMC_DATA_READ)
 			c |= TRANSFER_READ;
@@ -347,6 +376,40 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 	return 0;
 }
 
+static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
+				   unsigned short *buf,
+				   unsigned int count)
+{
+	int is_read = host->data->flags & MMC_DATA_READ;
+	u8  *buf8;
+
+	/*
+	 * Transfer the data
+	 */
+	if (is_read)
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+	else
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+
+	/* if count was even number */
+	if (!(count & 0x1))
+		return;
+
+	/* if count was odd number */
+	buf8 = (u8 *)(buf + (count >> 1));
+
+	/*
+	 * FIXME
+	 *
+	 * driver and this function are assuming that
+	 * it is used as little endian
+	 */
+	if (is_read)
+		*buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
+	else
+		sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
+}
+
 /*
  * This chip always returns (at least?) as much data as you ask for.
  * I'm unsure what happens if you ask for less than a block. This should be
@@ -379,10 +442,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 		 count, host->sg_off, data->flags);
 
 	/* Transfer the data */
-	if (data->flags & MMC_DATA_READ)
-		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
-	else
-		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+	tmio_mmc_transfer_data(host, buf, count);
 
 	host->sg_off += count;
 
@@ -465,6 +525,9 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 		goto out;
 
 	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+		u32 status = sd_ctrl_read32(host, CTL_STATUS);
+		bool done = false;
+
 		/*
 		 * Has all data been written out yet? Testing on SuperH showed,
 		 * that in most cases the first interrupt comes already with the
@@ -473,7 +536,15 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 		 * DATAEND interrupt with the BUSY bit set, in this cases
 		 * waiting for one more interrupt fixes the problem.
 		 */
-		if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
+		if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
+			if (status & TMIO_STAT_ILL_FUNC)
+				done = true;
+		} else {
+			if (!(status & TMIO_STAT_CMD_BUSY))
+				done = true;
+		}
+
+		if (done) {
 			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tasklet_schedule(&host->dma_complete);
 		}
@@ -557,6 +628,9 @@ static void tmio_mmc_card_irq_status(struct tmio_mmc_host *host,
 
 	pr_debug_status(*status);
 	pr_debug_status(*ireg);
+
+	/* Clear the status except the interrupt status */
+	sd_ctrl_write32(host, CTL_STATUS, TMIO_MASK_IRQ);
 }
 
 static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host,
@@ -637,6 +711,7 @@ irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
 	struct mmc_host *mmc = host->mmc;
 	struct tmio_mmc_data *pdata = host->pdata;
 	unsigned int ireg, status;
+	unsigned int sdio_status;
 
 	if (!(pdata->flags & TMIO_MMC_SDIO_IRQ))
 		return IRQ_HANDLED;
@@ -644,7 +719,11 @@ irqreturn_t tmio_mmc_sdio_irq(int irq, void *devid)
 	status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
 	ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdcard_irq_mask;
 
-	sd_ctrl_write16(host, CTL_SDIO_STATUS, status & ~TMIO_SDIO_MASK_ALL);
+	sdio_status = status & ~TMIO_SDIO_MASK_ALL;
+	if (pdata->flags & TMIO_MMC_SDIO_STATUS_QUIRK)
+		sdio_status |= 6;
+
+	sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
 
 	if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ)
 		mmc_signal_sdio_irq(mmc);
@@ -728,6 +807,8 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
+	pm_runtime_get_sync(mmc_dev(mmc));
+
 	if (mrq->data) {
 		ret = tmio_mmc_start_data(host, mrq->data);
 		if (ret)
@@ -746,11 +827,14 @@ fail:
 	host->mrq = NULL;
 	mrq->cmd->error = ret;
 	mmc_request_done(mmc, mrq);
+
+	pm_runtime_mark_last_busy(mmc_dev(mmc));
+	pm_runtime_put_autosuspend(mmc_dev(mmc));
 }
 
-static int tmio_mmc_clk_update(struct mmc_host *mmc)
+static int tmio_mmc_clk_update(struct tmio_mmc_host *host)
 {
-	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct mmc_host *mmc = host->mmc;
 	struct tmio_mmc_data *pdata = host->pdata;
 	int ret;
 
@@ -812,6 +896,19 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host)
 		host->set_pwr(host->pdev, 0);
 }
 
+static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
+				unsigned char bus_width)
+{
+	switch (bus_width) {
+	case MMC_BUS_WIDTH_1:
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+		break;
+	case MMC_BUS_WIDTH_4:
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+		break;
+	}
+}
+
 /* Set MMC clock / power.
  * Note: This controller uses a simple divider scheme therefore it cannot
  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -824,6 +921,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct device *dev = &host->pdev->dev;
 	unsigned long flags;
 
+	pm_runtime_get_sync(mmc_dev(mmc));
+
 	mutex_lock(&host->ios_lock);
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -850,60 +949,22 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	/*
-	 * host->power toggles between false and true in both cases - either
-	 * or not the controller can be runtime-suspended during inactivity.
-	 * But if the controller has to be kept on, the runtime-pm usage_count
-	 * is kept positive, so no suspending actually takes place.
-	 */
-	if (ios->power_mode == MMC_POWER_ON && ios->clock) {
-		if (host->power != TMIO_MMC_ON_RUN) {
-			tmio_mmc_clk_update(mmc);
-			pm_runtime_get_sync(dev);
-			if (host->resuming) {
-				tmio_mmc_reset(host);
-				host->resuming = false;
-			}
-		}
-		if (host->power == TMIO_MMC_OFF_STOP)
-			tmio_mmc_reset(host);
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		tmio_mmc_power_off(host);
+		tmio_mmc_clk_stop(host);
+		break;
+	case MMC_POWER_UP:
 		tmio_mmc_set_clock(host, ios->clock);
-		if (host->power == TMIO_MMC_OFF_STOP)
-			/* power up SD card and the bus */
-			tmio_mmc_power_on(host, ios->vdd);
-		host->power = TMIO_MMC_ON_RUN;
-		/* start bus clock */
+		tmio_mmc_power_on(host, ios->vdd);
 		tmio_mmc_clk_start(host);
-	} else if (ios->power_mode != MMC_POWER_UP) {
-		struct tmio_mmc_data *pdata = host->pdata;
-		unsigned int old_power = host->power;
-
-		if (old_power != TMIO_MMC_OFF_STOP) {
-			if (ios->power_mode == MMC_POWER_OFF) {
-				tmio_mmc_power_off(host);
-				host->power = TMIO_MMC_OFF_STOP;
-			} else {
-				host->power = TMIO_MMC_ON_STOP;
-			}
-		}
-
-		if (old_power == TMIO_MMC_ON_RUN) {
-			tmio_mmc_clk_stop(host);
-			pm_runtime_put(dev);
-			if (pdata->clk_disable)
-				pdata->clk_disable(host->pdev);
-		}
-	}
-
-	if (host->power != TMIO_MMC_OFF_STOP) {
-		switch (ios->bus_width) {
-		case MMC_BUS_WIDTH_1:
-			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+		tmio_mmc_set_bus_width(host, ios->bus_width);
 		break;
-		case MMC_BUS_WIDTH_4:
-			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+	case MMC_POWER_ON:
+		tmio_mmc_set_clock(host, ios->clock);
+		tmio_mmc_clk_start(host);
+		tmio_mmc_set_bus_width(host, ios->bus_width);
 		break;
-		}
 	}
 
 	/* Let things settle. delay taken from winCE driver */
@@ -915,7 +976,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			ios->clock, ios->power_mode);
 	host->mrq = NULL;
 
+	host->clk_cache = ios->clock;
+
 	mutex_unlock(&host->ios_lock);
+
+	pm_runtime_mark_last_busy(mmc_dev(mmc));
+	pm_runtime_put_autosuspend(mmc_dev(mmc));
 }
 
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
@@ -926,8 +992,25 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
 	if (ret >= 0)
 		return ret;
 
-	return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
-		 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+	pm_runtime_get_sync(mmc_dev(mmc));
+	ret = !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+		(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+	pm_runtime_mark_last_busy(mmc_dev(mmc));
+	pm_runtime_put_autosuspend(mmc_dev(mmc));
+
+	return ret;
+}
+
+static int tmio_multi_io_quirk(struct mmc_card *card,
+			       unsigned int direction, int blk_size)
+{
+	struct tmio_mmc_host *host = mmc_priv(card->host);
+	struct tmio_mmc_data *pdata = host->pdata;
+
+	if (pdata->multi_io_quirk)
+		return pdata->multi_io_quirk(card, direction, blk_size);
+
+	return blk_size;
 }
 
 static const struct mmc_host_ops tmio_mmc_ops = {
@@ -936,6 +1019,7 @@ static const struct mmc_host_ops tmio_mmc_ops = {
 	.get_ro         = tmio_mmc_get_ro,
 	.get_cd		= mmc_gpio_get_cd,
 	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+	.multi_io_quirk	= tmio_multi_io_quirk,
 };
 
 static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
@@ -1032,28 +1116,23 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 				  mmc->caps & MMC_CAP_NONREMOVABLE ||
 				  mmc->slot.cd_irq >= 0);
 
-	_host->power = TMIO_MMC_OFF_STOP;
-	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_resume(&pdev->dev);
-	if (ret < 0)
-		goto pm_disable;
-
-	if (tmio_mmc_clk_update(mmc) < 0) {
+	if (tmio_mmc_clk_update(_host) < 0) {
 		mmc->f_max = pdata->hclk;
 		mmc->f_min = mmc->f_max / 512;
 	}
 
 	/*
-	 * There are 4 different scenarios for the card detection:
-	 *  1) an external gpio irq handles the cd (best for power savings)
-	 *  2) internal sdhi irq handles the cd
-	 *  3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL
-	 *  4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE
-	 *
-	 *  While we increment the runtime PM counter for all scenarios when
-	 *  the mmc core activates us by calling an appropriate set_ios(), we
-	 *  must additionally ensure that in case 2) the tmio mmc hardware stays
-	 *  powered on during runtime for the card detection to work.
+	 * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+	 * looping forever...
+	 */
+	if (mmc->f_min == 0) {
+		ret = -EINVAL;
+		goto host_free;
+	}
+
+	/*
+	 * While using internal tmio hardware logic for card detection, we need
+	 * to ensure it stays powered for it to work.
 	 */
 	if (_host->native_hotplug)
 		pm_runtime_get_noresume(&pdev->dev);
@@ -1074,8 +1153,12 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 
 	_host->sdcard_irq_mask &= ~irq_mask;
 
-	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
-		tmio_mmc_enable_sdio_irq(mmc, 0);
+	_host->sdio_irq_enabled = false;
+	if (pdata->flags & TMIO_MMC_SDIO_IRQ) {
+		_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
+		sd_ctrl_write16(_host, CTL_SDIO_IRQ_MASK, _host->sdio_irq_mask);
+		sd_ctrl_write16(_host, CTL_TRANSACTION_CTL, 0x0000);
+	}
 
 	spin_lock_init(&_host->lock);
 	mutex_init(&_host->ios_lock);
@@ -1087,9 +1170,12 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	/* See if we also get DMA */
 	tmio_mmc_request_dma(_host, pdata);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	ret = mmc_add_host(mmc);
-	if (pdata->clk_disable)
-		pdata->clk_disable(pdev);
 	if (ret < 0) {
 		tmio_mmc_host_remove(_host);
 		return ret;
@@ -1103,15 +1189,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 			tmio_mmc_host_remove(_host);
 			return ret;
 		}
+		mmc_gpiod_request_cd_irq(mmc);
 	}
 
 	*host = _host;
 
 	return 0;
 
-pm_disable:
-	pm_runtime_disable(&pdev->dev);
-	iounmap(_host->ctl);
 host_free:
 	mmc_free_host(mmc);
 
@@ -1142,34 +1226,20 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 }
 EXPORT_SYMBOL(tmio_mmc_host_remove);
 
-#ifdef CONFIG_PM_SLEEP
-int tmio_mmc_host_suspend(struct device *dev)
+#ifdef CONFIG_PM
+int tmio_mmc_host_runtime_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 
 	tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
-	return 0;
-}
-EXPORT_SYMBOL(tmio_mmc_host_suspend);
-
-int tmio_mmc_host_resume(struct device *dev)
-{
-	struct mmc_host *mmc = dev_get_drvdata(dev);
-	struct tmio_mmc_host *host = mmc_priv(mmc);
 
-	tmio_mmc_enable_dma(host, true);
+	if (host->clk_cache)
+		tmio_mmc_clk_stop(host);
 
-	/* The MMC core will perform the complete set up */
-	host->resuming = true;
-	return 0;
-}
-EXPORT_SYMBOL(tmio_mmc_host_resume);
-#endif
+	if (host->pdata->clk_disable)
+		host->pdata->clk_disable(host->pdev);
 
-#ifdef CONFIG_PM_RUNTIME
-int tmio_mmc_host_runtime_suspend(struct device *dev)
-{
 	return 0;
 }
 EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);
@@ -1179,6 +1249,14 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 
+	tmio_mmc_reset(host);
+	tmio_mmc_clk_update(host);
+
+	if (host->clk_cache) {
+		tmio_mmc_set_clock(host, host->clk_cache);
+		tmio_mmc_clk_start(host);
+	}
+
 	tmio_mmc_enable_dma(host, true);
 
 	return 0;
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 1defd5ed3236..9a6dfb0c4ecc 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 		default:
 #ifdef CONFIG_MMC_DEBUG
-			pr_warning("%s: Data command %d is not "
-				"supported by this controller.\n",
+			pr_warn("%s: Data command %d is not supported by this controller\n",
 				mmc_hostname(host->mmc), cmd->opcode);
 #endif
 			cmd->error = -EINVAL;
@@ -1429,8 +1428,8 @@ free:
 	free_dma(dma);
 
 err:
-	pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
-		"Falling back on FIFO.\n", dma);
+	pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n",
+		dma);
 }
 
 static void wbsd_release_dma(struct wbsd_host *host)
@@ -1664,9 +1663,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
 	ret = wbsd_scan(host);
 	if (ret) {
 		if (pnp && (ret == -ENODEV)) {
-			pr_warning(DRIVER_NAME
-				": Unable to confirm device presence. You may "
-				"experience lock-ups.\n");
+			pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n");
 		} else {
 			wbsd_free_mmc(dev);
 			return ret;
@@ -1688,10 +1685,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
 	 */
 	if (pnp) {
 		if ((host->config != 0) && !wbsd_chip_validate(host)) {
-			pr_warning(DRIVER_NAME
-				": PnP active but chip not configured! "
-				"You probably have a buggy BIOS. "
-				"Configuring chip manually.\n");
+			pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
 			wbsd_chip_config(host);
 		}
 	} else
@@ -1884,10 +1878,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
 	 */
 	if (host->config != 0) {
 		if (!wbsd_chip_validate(host)) {
-			pr_warning(DRIVER_NAME
-				": PnP active but chip not configured! "
-				"You probably have a buggy BIOS. "
-				"Configuring chip manually.\n");
+			pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
 			wbsd_chip_config(host);
 		}
 	}
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 4c7a4b2104bf..91b77f8d495d 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_ATMEL_MCI_H
 #define __LINUX_ATMEL_MCI_H
 
+#include <linux/types.h>
+
 #define ATMCI_MAX_NR_SLOTS	2
 
 /**
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 8f6f2e91e7ae..57388171610d 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -5,6 +5,7 @@
 #include <linux/fb.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
+#include <linux/mmc/card.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
@@ -83,6 +84,27 @@
  */
 #define TMIO_MMC_HAVE_HIGH_REG		(1 << 6)
 
+/*
+ * Some controllers have CMD12 automatically
+ * issue/non-issue register
+ */
+#define TMIO_MMC_HAVE_CMD12_CTRL	(1 << 7)
+
+/*
+ * Some controllers needs to set 1 on SDIO status reserved bits
+ */
+#define TMIO_MMC_SDIO_STATUS_QUIRK	(1 << 8)
+
+/*
+ * Some controllers have DMA enable/disable register
+ */
+#define TMIO_MMC_HAVE_CTL_DMA_REG	(1 << 9)
+
+/*
+ * Some controllers allows to set SDx actual clock
+ */
+#define TMIO_MMC_CLK_ACTUAL		(1 << 10)
+
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
@@ -96,6 +118,7 @@ struct tmio_mmc_dma {
 	int slave_id_tx;
 	int slave_id_rx;
 	int alignment_shift;
+	dma_addr_t dma_rx_offset;
 	bool (*filter)(struct dma_chan *chan, void *arg);
 };
 
@@ -120,6 +143,8 @@ struct tmio_mmc_data {
 	/* clock management callbacks */
 	int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
 	void (*clk_disable)(struct platform_device *pdev);
+	int (*multi_io_quirk)(struct mmc_card *card,
+			      unsigned int direction, int blk_size);
 };
 
 /*
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index d424b9de3aff..b0692d28f8e6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -42,7 +42,8 @@ struct mmc_csd {
 	unsigned int		read_partial:1,
 				read_misalign:1,
 				write_partial:1,
-				write_misalign:1;
+				write_misalign:1,
+				dsr_imp:1;
 };
 
 struct mmc_ext_csd {
@@ -74,7 +75,7 @@ struct mmc_ext_csd {
 	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
 	unsigned int		sec_erase_mult;	/* Secure erase multiplier */
 	unsigned int		trim_timeout;		/* In milliseconds */
-	bool			enhanced_area_en;	/* enable bit */
+	bool			partition_setting_completed;	/* enable bit */
 	unsigned long long	enhanced_area_offset;	/* Units: Byte */
 	unsigned int		enhanced_area_size;	/* Units: KB */
 	unsigned int		cache_size;		/* Units: KB */
@@ -214,11 +215,12 @@ enum mmc_blk_status {
 };
 
 /* The number of MMC physical partitions.  These consist of:
- * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ * boot partitions (2), general purpose partitions (4) and
+ * RPMB partition (1) in MMC v4.4.
  */
 #define MMC_NUM_BOOT_PARTITION	2
 #define MMC_NUM_GP_PARTITION	4
-#define MMC_NUM_PHY_PARTITION	6
+#define MMC_NUM_PHY_PARTITION	7
 #define MAX_MMC_PART_NAME_LEN	20
 
 /*
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 29ce014ab421..001366927cf4 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -26,6 +26,8 @@ enum dw_mci_state {
 	STATE_DATA_BUSY,
 	STATE_SENDING_STOP,
 	STATE_DATA_ERROR,
+	STATE_SENDING_CMD11,
+	STATE_WAITING_CMD11_DONE,
 };
 
 enum {
@@ -188,7 +190,7 @@ struct dw_mci {
 	/* Workaround flags */
 	u32			quirks;
 
-	struct regulator	*vmmc;	/* Power regulator */
+	bool			vqmmc_enabled;
 	unsigned long		irq_flags; /* IRQ flags */
 	int			irq;
 };
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7960424d0bc0..df0c15396bbf 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -42,6 +42,7 @@ struct mmc_ios {
 #define MMC_POWER_OFF		0
 #define MMC_POWER_UP		1
 #define MMC_POWER_ON		2
+#define MMC_POWER_UNDEFINED	3
 
 	unsigned char	bus_width;		/* data bus width */
 
@@ -139,6 +140,13 @@ struct mmc_host_ops {
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
 	void	(*card_event)(struct mmc_host *host);
+
+	/*
+	 * Optional callback to support controllers with HW issues for multiple
+	 * I/O. Returns the number of supported blocks for the request.
+	 */
+	int	(*multi_io_quirk)(struct mmc_card *card,
+				  unsigned int direction, int blk_size);
 };
 
 struct mmc_card;
@@ -265,7 +273,6 @@ struct mmc_host {
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
 #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
-#define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
 #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
 #define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
@@ -365,6 +372,9 @@ struct mmc_host {
 
 	unsigned int		slotno;	/* used for sdio acpi binding */
 
+	int			dsr_req;	/* DSR value is valid */
+	u32			dsr;	/* optional driver stage (DSR) value */
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 64ec963ed347..1cd00b3a75b9 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -53,6 +53,11 @@
 #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
 #define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
 
+#define MMC_TUNING_BLK_PATTERN_4BIT_SIZE	 64
+#define MMC_TUNING_BLK_PATTERN_8BIT_SIZE	128
+extern const u8 tuning_blk_pattern_4bit[MMC_TUNING_BLK_PATTERN_4BIT_SIZE];
+extern const u8 tuning_blk_pattern_8bit[MMC_TUNING_BLK_PATTERN_8BIT_SIZE];
+
   /* class 3 */
 #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
 
@@ -281,6 +286,7 @@ struct _mmc_csd {
 #define EXT_CSD_EXP_EVENTS_CTRL		56	/* R/W, 2 bytes */
 #define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
 #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
+#define EXT_CSD_PARTITION_SETTING_COMPLETED 155	/* R/W */
 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
 #define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
 #define EXT_CSD_HPI_MGMT		161	/* R/W */
@@ -349,6 +355,7 @@ struct _mmc_csd {
 #define EXT_CSD_PART_CONFIG_ACC_RPMB	(0x3)
 #define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
 
+#define EXT_CSD_PART_SETTING_COMPLETED	(0x1)
 #define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
 
 #define EXT_CSD_CMD_SET_NORMAL		(1<<0)
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 09ebe57d5ce9..dba793e3a331 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -98,6 +98,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
 /* Controller does not support DDR50 */
 #define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
+/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
+#define SDHCI_QUIRK2_STOP_WITH_TC			(1<<8)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -146,6 +148,7 @@ struct sdhci_host {
 	struct mmc_command *cmd;	/* Current command */
 	struct mmc_data *data;	/* Current data request */
 	unsigned int data_early:1;	/* Data finished before cmd */
+	unsigned int busy_handle:1;	/* Handling the order of Busy-end */
 
 	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
 	unsigned int blocks;	/* remaining PIO blocks */
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index d2433381e828..e56fa24c9322 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -24,7 +24,10 @@ void mmc_gpio_free_cd(struct mmc_host *host);
 
 int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 			 unsigned int idx, bool override_active_level,
-			 unsigned int debounce);
+			 unsigned int debounce, bool *gpio_invert);
+int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert);
 void mmc_gpiod_free_cd(struct mmc_host *host);
 void mmc_gpiod_request_cd_irq(struct mmc_host *host);
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-10-11 06:34:22 -0400
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-10-11 06:34:22 -0400
commit	f43b179bbd84d2106c6fb8c7f2db1bfacff19f62 (patch)
tree	581e60846d1298276fac0b768ba12e06d7600d1e
parent	a2ce35273c2f1aa0dcddd8822681d64ee5f31852 (diff)
parent	583f958b8a23343c904ec0790c25c96f5f82d409 (diff)
download	linux-f43b179bbd84d2106c6fb8c7f2db1bfacff19f62.tar.gz