diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-07 10:24:18 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-07 10:24:18 -0700 |
| commit | e5744abb2fa3629aa5a94e21ca1eae32ff2fe00b (patch) | |
| tree | ef90c96390256b073f5255d224aecb2fc1f6ee84 | |
| parent | c29aa153ef0469cddf0146d41ce6494bd76be78b (diff) | |
| parent | 2d28ca731b9bb6262f7711241628c7844b0cf7dc (diff) | |
| download | linux-e5744abb2fa3629aa5a94e21ca1eae32ff2fe00b.tar.gz | |
Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
- Advanced error handling - omap
- Rework clk management - omap
- Device Tree (re-)work - tc3589x, pm8921, da9055, sec
- IRC management overhaul and !BROKEN - pm8921
- Convert to regmap - ssbi, pm8921
- Use simple power-management ops - ucb1x00
- Include file clean-up - adp5520, cs5535, janz, lpc_ich,
- lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
tps65912, vexpress-config, wm8350, ywm8350
- Various bug fixes across the subsystem
- NULL/invalid pointer dereference prevention
- Resource leak mitigation,
- Variable used initialised
- Staticise various containers
- Enforce return value checks
New drivers/supported devices:
- Add support for s2mps14 and s2mpa01 to sec
- Add support for da9063 (v5) to da9063
- Add support for atom-c2000 to gpio-ich
- Add support for come-{mbt10,cbt6,chl6} to kempld
- Add support for da9053 to da9052
- Add support for itco-wdt (v3) and baytrail to lpc_ich
- Add new drivers for tps65218, rtsx_usb, bcm590xx
(Re-)moved drivers:
- twl4030 ==> drivers/iio
- ti-ssp ==> /dev/null"
* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
mfd: wm5110: Correct default for HEADPHONE_DETECT_1
mfd: arizona: Correct small errors in the DT binding documentation
mfd: arizona: Mark DSP clocking register as volatile
mfd: devicetree: bindings: Add pm8xxx RTC description
mfd: kempld-core: Fix potential hang-up during boot
mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
mfd: sec-core: Fix I2C dummy device resource leak on probe failure
mfd: sec-core: Add of_compatible strings for clock MFD cells
mfd: Remove obsolete ti-ssp driver
Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
mfd: bcm590xx: Fix type argument for module device table
mfd: lpc_ich: Add support for Intel Bay Trail SoC
mfd: lpc_ich: Add support for NM10 GPIO
mfd: lpc_ich: Change Avoton to iTCO v3
watchdog: iTCO_wdt: Add support for v3 silicon
mfd: lpc_ich: Add support for iTCO v3
mfd: lpc_ich: Remove lpc_ich_cfg struct use
mfd: lpc_ich: Only configure watchdog or GPIO when present
...
92 files changed, 3958 insertions, 1588 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt new file mode 100644 index 000000000000..6bdd21404b57 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/twl4030-madc.txt @@ -0,0 +1,24 @@ +* TWL4030 Monitoring Analog to Digital Converter (MADC) + +The MADC subsystem in the TWL4030 consists of a 10-bit ADC +combined with a 16-input analog multiplexer. + +Required properties: + - compatible: Should contain "ti,twl4030-madc". + - interrupts: IRQ line for the MADC submodule. + - #io-channel-cells: Should be set to <1>. + +Optional properties: + - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register + should be used, which is intended to be used + by Co-Processors (e.g. a modem). + +Example: + +&twl { + madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 0e295c9d8937..36a0c3d8c726 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -5,9 +5,10 @@ of analogue I/O. Required properties: - - compatible : one of the following chip-specific strings: - "wlf,wm5102" - "wlf,wm5110" + - compatible : One of the following chip-specific strings: + "wlf,wm5102" + "wlf,wm5110" + "wlf,wm8997" - reg : I2C slave address when connected using I2C, chip select number when using SPI. @@ -25,8 +26,9 @@ Required properties: - #gpio-cells : Must be 2. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - - AVDD1-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply, - SPKVDDL-supply, SPKVDDR-supply : power supplies for the device, as covered + - AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110), + CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102, + wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: @@ -46,6 +48,7 @@ codec: wm5102@1a { compatible = "wlf,wm5102"; reg = <0x1a>; interrupts = <347>; + interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&gic>; @@ -53,10 +56,10 @@ codec: wm5102@1a { #gpio-cells = <2>; wlf,gpio-defaults = < - 0x00000000, /* AIF1TXLRCLK */ - 0xffffffff, - 0xffffffff, - 0xffffffff, - 0xffffffff, + 0x00000000 /* AIF1TXLRCLK */ + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff >; }; diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/bcm590xx.txt new file mode 100644 index 000000000000..1fe30e2b10da --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bcm590xx.txt @@ -0,0 +1,37 @@ +------------------------------- +BCM590xx Power Management Units +------------------------------- + +Required properties: +- compatible: "brcm,bcm59056" +- reg: I2C slave address +- interrupts: interrupt for the PMU. Generic interrupt client node bindings + are described in interrupt-controller/interrupts.txt + +------------------ +Voltage Regulators +------------------ + +Optional child nodes: +- regulators: container node for regulators following the generic + regulator binding in regulator/regulator.txt + + The valid regulator node names for BCM59056 are: + rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, + mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr + +Example: + pmu: bcm59056@8 { + compatible = "brcm,bcm59056"; + reg = <0x08>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + regulators { + rfldo_reg: rfldo { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + ... + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt new file mode 100644 index 000000000000..6dab34d34fce --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9055.txt @@ -0,0 +1,72 @@ +* Dialog DA9055 Power Management Integrated Circuit (PMIC) + +DA9055 consists of a large and varied group of sub-devices (I2C Only): + +Device Supply Names Description +------ ------------ ----------- +da9055-gpio : : GPIOs +da9055-regulator : : Regulators +da9055-onkey : : On key +da9055-rtc : : RTC +da9055-hwmon : : ADC +da9055-watchdog : : Watchdog + +The CODEC device in DA9055 has a separate, configurable I2C address and so +is instantiated separately from the PMIC. + +For details on accompanying CODEC I2C device, see the following: +Documentation/devicetree/bindings/sound/da9055.txt + +====== + +Required properties: +- compatible : Should be "dlg,da9055-pmic" +- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified) +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the IRQs from da9055 are delivered to. +- interrupts: IRQ line info for da9055 chip. +- interrupt-controller: da9055 has internal IRQs (has own IRQ domain). +- #interrupt-cells: Should be 1, is the local IRQ number for da9055. + +Sub-nodes: +- regulators : Contain the regulator nodes. The DA9055 regulators are + bound using their names as listed below: + + buck1 : regulator BUCK1 + buck2 : regulator BUCK2 + ldo1 : regulator LDO1 + ldo2 : regulator LDO2 + ldo3 : regulator LDO3 + ldo4 : regulator LDO4 + ldo5 : regulator LDO5 + ldo6 : regulator LDO6 + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + +Example: + + pmic: da9055-pmic@5a { + compatible = "dlg,da9055-pmic"; + reg = <0x5a>; + interrupt-parent = <&intc>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + buck1: BUCK1 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <2075000>; + }; + buck2: BUCK2 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + ldo1: LDO1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt index b381fa696bf9..4721b2d521e4 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -32,6 +32,29 @@ Optional properties: - single-ulpi-bypass: Must be present if the controller contains a single ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + For OMAP3 + * "usbhost_120m_fck" - 120MHz Functional clock. + + For OMAP4+ + * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux + * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux. + * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux + * "utmi_p1_gfclk" - Port 1 UTMI clock mux. + * "utmi_p2_gfclk" - Port 2 UTMI clock mux. + * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate. + * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate. + * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate. + * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate. + * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate. + * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate. + * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate. + Required properties if child node exists: - #address-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt index 62fe69724e3b..c58d70437fce 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt @@ -7,6 +7,16 @@ Required properties: - interrupts : should contain the TLL module's interrupt - ti,hwmod : must contain "usb_tll_hs" +Optional properties: + +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock + * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock + * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock + Example: usbhstll: usbhstll@4a062000 { diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt new file mode 100644 index 000000000000..03518dc8b6bd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt @@ -0,0 +1,96 @@ +Qualcomm PM8xxx PMIC multi-function devices + +The PM8xxx family of Power Management ICs are used to provide regulated +voltages and other various functionality to Qualcomm SoCs. + += PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058" + "qcom,pm8921" + +- #address-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +- #size-cells: + Usage: required + Value type: <u32> + Definition: must be 0 + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: specifies the interrupt that indicates a subdevice + has generated an interrupt (summary interrupt). The + format of the specifier is defined by the binding document + describing the node's interrupt parent. + +- #interrupt-cells: + Usage: required + Value type : <u32> + Definition: must be 2. Specifies the number of cells needed to encode + an interrupt source. The 1st cell contains the interrupt + number. The 2nd cell is the trigger type and level flags + encoded as follows: + + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + +- interrupt-controller: + Usage: required + Value type: <empty> + Definition: identifies this node as an interrupt controller + += SUBCOMPONENTS + +The PMIC contains multiple independent functions, each described in a subnode. +The below bindings specify the set of valid subnodes. + +== Real-Time Clock + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058-rtc" + "qcom,pm8921-rtc" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: single entry specifying the base address of the RTC registers + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: single entry specifying the RTC's alarm interrupt + +- allow-set-time: + Usage: optional + Value type: <empty> + Definition: indicates that the setting of RTC time is allowed by + the host CPU + += EXAMPLE + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts = <0x27 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index f69bec294f02..802e839b0829 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -16,20 +16,25 @@ Optional properties: - interrupts: Interrupt specifiers for interrupt sources. Optional nodes: -- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to - register these as clocks with common clock framework instantiate a sub-node - named "clocks". It uses the common clock binding documented in : +- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz + outputs, so to register these as clocks with common clock framework + instantiate a sub-node named "clocks". It uses the common clock binding + documented in : [Documentation/devicetree/bindings/clock/clock-bindings.txt] + The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs. - #clock-cells: should be 1. - The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. - Clock ID - ---------------------- - 32KhzAP 0 - 32KhzCP 1 - 32KhzBT 2 + Clock ID Devices + ---------------------------------------------------------- + 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 + 32KhzCP 1 S2MPS11, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 + + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk", + "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -75,7 +80,8 @@ Example: compatible = "samsung,s2mps11-pmic"; reg = <0x66>; - s2m_osc: clocks{ + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = 1; clock-output-names = "xx", "yy", "zz"; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index fe61976dc1a5..0769ec57a3f5 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -733,6 +733,12 @@ #address-cells = <1>; #size-cells = <1>; ranges; + clocks = <&init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 8292ad0fe69f..19155bb84835 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -814,6 +814,12 @@ #address-cells = <1>; #size-cells = <1>; ranges; + clocks = <&l3init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 11ed9152e665..8f5121b89688 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3497,10 +3497,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "dss_tv_fck", &dss_tv_fck), CLK(NULL, "dss_96m_fck", &dss_96m_fck), CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck), - CLK(NULL, "utmi_p1_gfclk", &dummy_ck), - CLK(NULL, "utmi_p2_gfclk", &dummy_ck), - CLK(NULL, "xclk60mhsp1_ck", &dummy_ck), - CLK(NULL, "xclk60mhsp2_ck", &dummy_ck), CLK(NULL, "init_60m_fclk", &dummy_ck), CLK(NULL, "gpt1_fck", &gpt1_fck), CLK(NULL, "aes2_ick", &aes2_ick), diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9c7e23aa0e7f..a123ff0070bd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1955,10 +1955,6 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { .sysc = &omap3xxx_usb_host_hs_sysc, }; -static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { - { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", }, -}; - static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, }, { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, }, @@ -1981,8 +1977,6 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT, }, }, - .opt_clks = omap3xxx_usb_host_hs_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks), /* * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c index d3230234f07b..0d1750a8aea4 100644 --- a/drivers/clk/ti/clk-3xxx.c +++ b/drivers/clk/ti/clk-3xxx.c @@ -130,10 +130,6 @@ static struct ti_dt_clk omap3xxx_clks[] = { DT_CLK(NULL, "dss_tv_fck", "dss_tv_fck"), DT_CLK(NULL, "dss_96m_fck", "dss_96m_fck"), DT_CLK(NULL, "dss2_alwon_fck", "dss2_alwon_fck"), - DT_CLK(NULL, "utmi_p1_gfclk", "dummy_ck"), - DT_CLK(NULL, "utmi_p2_gfclk", "dummy_ck"), - DT_CLK(NULL, "xclk60mhsp1_ck", "dummy_ck"), - DT_CLK(NULL, "xclk60mhsp2_ck", "dummy_ck"), DT_CLK(NULL, "init_60m_fclk", "dummy_ck"), DT_CLK(NULL, "gpt1_fck", "gpt1_fck"), DT_CLK(NULL, "aes2_ick", "aes2_ick"), diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c index bfef20f8ab48..e73c6755a5eb 100644 --- a/drivers/gpio/gpio-ich.c +++ b/drivers/gpio/gpio-ich.c @@ -1,5 +1,5 @@ /* - * Intel ICH6-10, Series 5 and 6 GPIO driver + * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver * * Copyright (C) 2010 Extreme Engineering Solutions. * @@ -55,6 +55,16 @@ static const u8 ichx_reglen[3] = { 0x30, 0x10, 0x10, }; +static const u8 avoton_regs[4][3] = { + {0x00, 0x80, 0x00}, + {0x04, 0x84, 0x00}, + {0x08, 0x88, 0x00}, +}; + +static const u8 avoton_reglen[3] = { + 0x10, 0x10, 0x00, +}; + #define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start) #define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start) @@ -353,6 +363,17 @@ static struct ichx_desc intel5_desc = { .reglen = ichx_reglen, }; +/* Avoton */ +static struct ichx_desc avoton_desc = { + /* Avoton has only 59 GPIOs, but we assume the first set of register + * (Core) has 32 instead of 31 to keep gpio-ich compliance + */ + .ngpio = 60, + .regs = avoton_regs, + .reglen = avoton_reglen, + .use_outlvl_cache = true, +}; + static int ichx_gpio_request_regions(struct resource *res_base, const char *name, u8 use_gpio) { @@ -427,6 +448,9 @@ static int ichx_gpio_probe(struct platform_device *pdev) case ICH_V10CONS_GPIO: ichx_priv.desc = &ich10_cons_desc; break; + case AVOTON_GPIO: + ichx_priv.desc = &avoton_desc; + break; default: return -ENODEV; } diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4bf4c16de976..d86196cfe4b4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -193,6 +193,16 @@ config TI_AM335X_ADC Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. +config TWL4030_MADC + tristate "TWL4030 MADC (Monitoring A/D Converter)" + depends on TWL4030_CORE + help + This driver provides support for Triton TWL4030-MADC. The + driver supports both RT and SW conversion methods. + + This driver can also be built as a module. If so, the module will be + called twl4030-madc. + config TWL6030_GPADC tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" depends on TWL4030_CORE diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index bb252540664a..ab346d88c688 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o +obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o obj-$(CONFIG_VF610_ADC) += vf610_adc.o obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o diff --git a/drivers/mfd/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index 4c583e471339..7de1c4c87942 100644 --- a/drivers/mfd/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -29,7 +29,6 @@ * */ -#include <linux/init.h> #include <linux/device.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -47,20 +46,84 @@ #include <linux/gfp.h> #include <linux/err.h> -/* +#include <linux/iio/iio.h> + +/** * struct twl4030_madc_data - a container for madc info - * @dev - pointer to device structure for madc - * @lock - mutex protecting this data structure - * @requests - Array of request struct corresponding to SW1, SW2 and RT - * @imr - Interrupt mask register of MADC - * @isr - Interrupt status register of MADC + * @dev: Pointer to device structure for madc + * @lock: Mutex protecting this data structure + * @requests: Array of request struct corresponding to SW1, SW2 and RT + * @use_second_irq: IRQ selection (main or co-processor) + * @imr: Interrupt mask register of MADC + * @isr: Interrupt status register of MADC */ struct twl4030_madc_data { struct device *dev; struct mutex lock; /* mutex protecting this data structure */ struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS]; - int imr; - int isr; + bool use_second_irq; + u8 imr; + u8 isr; +}; + +static int twl4030_madc_read(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct twl4030_madc_data *madc = iio_priv(iio_dev); + struct twl4030_madc_request req; + int ret; + + req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1; + + req.channels = BIT(chan->channel); + req.active = false; + req.func_cb = NULL; + req.type = TWL4030_MADC_WAIT; + req.raw = !(mask == IIO_CHAN_INFO_PROCESSED); + req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW); + + ret = twl4030_madc_conversion(&req); + if (ret < 0) + return ret; + + *val = req.rbuf[chan->channel]; + + return IIO_VAL_INT; +} + +static const struct iio_info twl4030_madc_iio_info = { + .read_raw = &twl4030_madc_read, + .driver_module = THIS_MODULE, +}; + +#define TWL4030_ADC_CHANNEL(_channel, _type, _name) { \ + .type = _type, \ + .channel = _channel, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \ + BIT(IIO_CHAN_INFO_PROCESSED), \ + .datasheet_name = _name, \ + .indexed = 1, \ +} + +static const struct iio_chan_spec twl4030_madc_iio_channels[] = { + TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"), + TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"), + TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"), + TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"), + TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"), + TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"), + TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"), + TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"), + TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"), + TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"), + TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"), + TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"), + TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"), + TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"), + TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"), + TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"), }; static struct twl4030_madc_data *twl4030_madc; @@ -91,17 +154,16 @@ twl4030_divider_ratios[16] = { }; -/* - * Conversion table from -3 to 55 degree Celcius - */ -static int therm_tbl[] = { -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 +/* Conversion table from -3 to 55 degrees Celcius */ +static int twl4030_therm_tbl[] = { + 30800, 29500, 28300, 27100, + 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, + 17900, 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, + 12600, 12100, 11600, 11200, 10800, 10400, 10000, 9630, 9280, + 8950, 8620, 8310, 8020, 7730, 7460, 7200, 6950, 6710, + 6470, 6250, 6040, 5830, 5640, 5450, 5260, 5090, 4920, + 4760, 4600, 4450, 4310, 4170, 4040, 3910, 3790, 3670, + 3550 }; /* @@ -133,37 +195,32 @@ const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = { }, }; -/* - * Function to read a particular channel value. - * @madc - pointer to struct twl4030_madc_data - * @reg - lsb of ADC Channel - * If the i2c read fails it returns an error else returns 0. +/** + * twl4030_madc_channel_raw_read() - Function to read a particular channel value + * @madc: pointer to struct twl4030_madc_data + * @reg: lsb of ADC Channel + * + * Return: 0 on success, an error code otherwise. */ static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg) { - u8 msb, lsb; + u16 val; int ret; /* * For each ADC channel, we have MSB and LSB register pair. MSB address * is always LSB address+1. reg parameter is the address of LSB register */ - ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1); + ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg); if (ret) { - dev_err(madc->dev, "unable to read MSB register 0x%X\n", - reg + 1); - return ret; - } - ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg); - if (ret) { - dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg); + dev_err(madc->dev, "unable to read register 0x%X\n", reg); return ret; } - return (int)(((msb << 8) | lsb) >> 6); + return (int)(val >> 6); } /* - * Return battery temperature + * Return battery temperature in degrees Celsius * Or < 0 on failure. */ static int twl4030battery_temperature(int raw_volt) @@ -172,18 +229,18 @@ static int twl4030battery_temperature(int raw_volt) int temp, curr, volt, res, ret; volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R; - /* Getting and calculating the supply current in micro ampers */ + /* Getting and calculating the supply current in micro amperes */ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val, REG_BCICTL2); if (ret < 0) return ret; + curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10; /* Getting and calculating the thermistor resistance in ohms */ res = volt * 1000 / curr; /* calculating temperature */ for (temp = 58; temp >= 0; temp--) { - int actual = therm_tbl[temp]; - + int actual = twl4030_therm_tbl[temp]; if ((actual - res) >= 0) break; } @@ -205,11 +262,12 @@ static int twl4030battery_current(int raw_volt) else /* slope of 0.88 mV/mA */ return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2; } + /* * Function to read channel values * @madc - pointer to twl4030_madc_data struct * @reg_base - Base address of the first channel - * @Channels - 16 bit bitmap. If the bit is set, channel value is read + * @Channels - 16 bit bitmap. If the bit is set, channel's value is read * @buf - The channel values are stored here. if read fails error * @raw - Return raw values without conversion * value is stored @@ -220,17 +278,17 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, long channels, int *buf, bool raw) { - int count = 0, count_req = 0, i; + int count = 0; + int i; u8 reg; for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) { - reg = reg_base + 2 * i; + reg = reg_base + (2 * i); buf[i] = twl4030_madc_channel_raw_read(madc, reg); if (buf[i] < 0) { - dev_err(madc->dev, - "Unable to read register 0x%X\n", reg); - count_req++; - continue; + dev_err(madc->dev, "Unable to read register 0x%X\n", + reg); + return buf[i]; } if (raw) { count++; @@ -241,7 +299,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, buf[i] = twl4030battery_current(buf[i]); if (buf[i] < 0) { dev_err(madc->dev, "err reading current\n"); - count_req++; + return buf[i]; } else { count++; buf[i] = buf[i] - 750; @@ -251,7 +309,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, buf[i] = twl4030battery_temperature(buf[i]); if (buf[i] < 0) { dev_err(madc->dev, "err reading temperature\n"); - count_req++; + return buf[i]; } else { buf[i] -= 3; count++; @@ -272,8 +330,6 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, twl4030_divider_ratios[i].numerator); } } - if (count_req) - dev_err(madc->dev, "%d channel conversion failed\n", count_req); return count; } @@ -297,13 +353,13 @@ static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id) madc->imr); return ret; } + val &= ~(1 << id); ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr); if (ret) { dev_err(madc->dev, "unable to write imr register 0x%X\n", madc->imr); return ret; - } return 0; @@ -366,7 +422,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc) continue; ret = twl4030_madc_disable_irq(madc, i); if (ret < 0) - dev_dbg(madc->dev, "Disable interrupt failed%d\n", i); + dev_dbg(madc->dev, "Disable interrupt failed %d\n", i); madc->requests[i].result_pending = 1; } for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { @@ -448,21 +504,17 @@ static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc, { const struct twl4030_madc_conversion_method *method; int ret = 0; + + if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2) + return -ENOTSUPP; + method = &twl4030_conversion_methods[conv_method]; - switch (conv_method) { - case TWL4030_MADC_SW1: - case TWL4030_MADC_SW2: - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, - TWL4030_MADC_SW_START, method->ctrl); - if (ret) { - dev_err(madc->dev, - "unable to write ctrl register 0x%X\n", - method->ctrl); - return ret; - } - break; - default: - break; + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START, + method->ctrl); + if (ret) { + dev_err(madc->dev, "unable to write ctrl register 0x%X\n", + method->ctrl); + return ret; } return 0; @@ -513,7 +565,6 @@ static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc, int twl4030_madc_conversion(struct twl4030_madc_request *req) { const struct twl4030_madc_conversion_method *method; - u8 ch_msb, ch_lsb; int ret; if (!req || !twl4030_madc) @@ -529,38 +580,22 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) ret = -EBUSY; goto out; } - ch_msb = (req->channels >> 8) & 0xff; - ch_lsb = req->channels & 0xff; method = &twl4030_conversion_methods[req->method]; /* Select channels to be converted */ - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1); - if (ret) { - dev_err(twl4030_madc->dev, - "unable to write sel register 0x%X\n", method->sel + 1); - goto out; - } - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel); + ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel); if (ret) { dev_err(twl4030_madc->dev, - "unable to write sel register 0x%X\n", method->sel + 1); + "unable to write sel register 0x%X\n", method->sel); goto out; } /* Select averaging for all channels if do_avg is set */ if (req->do_avg) { - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, - ch_msb, method->avg + 1); + ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, + method->avg); if (ret) { dev_err(twl4030_madc->dev, "unable to write avg register 0x%X\n", - method->avg + 1); - goto out; - } - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, - ch_lsb, method->avg); - if (ret) { - dev_err(twl4030_madc->dev, - "unable to write sel reg 0x%X\n", - method->sel + 1); + method->avg); goto out; } } @@ -601,10 +636,6 @@ out: } EXPORT_SYMBOL_GPL(twl4030_madc_conversion); -/* - * Return channel value - * Or < 0 on failure. - */ int twl4030_get_madc_conversion(int channel_no) { struct twl4030_madc_request req; @@ -625,20 +656,25 @@ int twl4030_get_madc_conversion(int channel_no) } EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion); -/* +/** + * twl4030_madc_set_current_generator() - setup bias current + * + * @madc: pointer to twl4030_madc_data struct + * @chan: can be one of the two values: + * TWL4030_BCI_ITHEN + * Enables bias current for main battery type reading + * TWL4030_BCI_TYPEN + * Enables bias current for main battery temperature sensing + * @on: enable or disable chan. + * * Function to enable or disable bias current for * main battery type reading or temperature sensing - * @madc - pointer to twl4030_madc_data struct - * @chan - can be one of the two values - * TWL4030_BCI_ITHEN - Enables bias current for main battery type reading - * TWL4030_BCI_TYPEN - Enables bias current for main battery temperature - * sensing - * @on - enable or disable chan. */ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc, int chan, int on) { int ret; + int regmask; u8 regval; ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, @@ -648,10 +684,13 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc, TWL4030_BCI_BCICTL1); return ret; } + + regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN; if (on) - regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN; + regval |= regmask; else - regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN; + regval &= ~regmask; + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, regval, TWL4030_BCI_BCICTL1); if (ret) { @@ -666,7 +705,7 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc, /* * Function that sets MADC software power on bit to enable MADC * @madc - pointer to twl4030_madc_data struct - * @on - Enable or disable MADC software powen on bit. + * @on - Enable or disable MADC software power on bit. * returns error if i2c read/write fails else 0 */ static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on) @@ -702,31 +741,52 @@ static int twl4030_madc_probe(struct platform_device *pdev) { struct twl4030_madc_data *madc; struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev); - int ret; + struct device_node *np = pdev->dev.of_node; + int irq, ret; u8 regval; + struct iio_dev *iio_dev = NULL; - if (!pdata) { - dev_err(&pdev->dev, "platform_data not available\n"); + if (!pdata && !np) { + dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n"); return -EINVAL; } - madc = kzalloc(sizeof(*madc), GFP_KERNEL); - if (!madc) + + iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc)); + if (!iio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); return -ENOMEM; + } + madc = iio_priv(iio_dev); madc->dev = &pdev->dev; + iio_dev->name = dev_name(&pdev->dev); + iio_dev->dev.parent = &pdev->dev; + iio_dev->dev.of_node = pdev->dev.of_node; + iio_dev->info = &twl4030_madc_iio_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = twl4030_madc_iio_channels; + iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels); + /* * Phoenix provides 2 interrupt lines. The first one is connected to * the OMAP. The other one can be connected to the other processor such * as modem. Hence two separate ISR and IMR registers. */ - madc->imr = (pdata->irq_line == 1) ? - TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2; - madc->isr = (pdata->irq_line == 1) ? - TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2; + if (pdata) + madc->use_second_irq = (pdata->irq_line != 1); + else + madc->use_second_irq = of_property_read_bool(np, + "ti,system-uses-second-madc-irq"); + + madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 : + TWL4030_MADC_IMR1; + madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 : + TWL4030_MADC_ISR1; + ret = twl4030_madc_set_power(madc, 1); if (ret < 0) - goto err_power; + return ret; ret = twl4030_madc_set_current_generator(madc, 0, 1); if (ret < 0) goto err_current_generator; @@ -768,46 +828,63 @@ static int twl4030_madc_probe(struct platform_device *pdev) } } - platform_set_drvdata(pdev, madc); + platform_set_drvdata(pdev, iio_dev); mutex_init(&madc->lock); - ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL, + + irq = platform_get_irq(pdev, 0); + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, twl4030_madc_threaded_irq_handler, IRQF_TRIGGER_RISING, "twl4030_madc", madc); if (ret) { - dev_dbg(&pdev->dev, "could not request irq\n"); + dev_err(&pdev->dev, "could not request irq\n"); goto err_i2c; } twl4030_madc = madc; + + ret = iio_device_register(iio_dev); + if (ret) { + dev_err(&pdev->dev, "could not register iio device\n"); + goto err_i2c; + } + return 0; + err_i2c: twl4030_madc_set_current_generator(madc, 0, 0); err_current_generator: twl4030_madc_set_power(madc, 0); -err_power: - kfree(madc); - return ret; } static int twl4030_madc_remove(struct platform_device *pdev) { - struct twl4030_madc_data *madc = platform_get_drvdata(pdev); + struct iio_dev *iio_dev = platform_get_drvdata(pdev); + struct twl4030_madc_data *madc = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); - free_irq(platform_get_irq(pdev, 0), madc); twl4030_madc_set_current_generator(madc, 0, 0); twl4030_madc_set_power(madc, 0); - kfree(madc); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl_madc_of_match[] = { + { .compatible = "ti,twl4030-madc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_madc_of_match); +#endif + static struct platform_driver twl4030_madc_driver = { .probe = twl4030_madc_probe, .remove = twl4030_madc_remove, .driver = { .name = "twl4030_madc", .owner = THIS_MODULE, - }, + .of_match_table = of_match_ptr(twl_madc_of_match), + }, }; module_platform_driver(twl4030_madc_driver); diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index 7dca1e640970..841717a2842c 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -571,7 +571,7 @@ static int pm800_probe(struct i2c_client *client, ret = pm800_pages_init(chip); if (ret) { dev_err(&client->dev, "pm800_pages_init failed!\n"); - goto err_page_init; + goto err_device_init; } ret = device_800_init(chip, pdata); @@ -587,7 +587,6 @@ static int pm800_probe(struct i2c_client *client, err_device_init: pm800_pages_exit(chip); -err_page_init: err_subchip_alloc: pm80x_deinit(); out_init: diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index c9b1f6422941..bcfc9e85b4a0 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -1179,12 +1179,18 @@ static int pm860x_probe(struct i2c_client *client, chip->companion_addr = pdata->companion_addr; chip->companion = i2c_new_dummy(chip->client->adapter, chip->companion_addr); + if (!chip->companion) { + dev_err(&client->dev, + "Failed to allocate I2C companion device\n"); + return -ENODEV; + } chip->regmap_companion = regmap_init_i2c(chip->companion, &pm860x_regmap_config); if (IS_ERR(chip->regmap_companion)) { ret = PTR_ERR(chip->regmap_companion); dev_err(&chip->companion->dev, "Failed to allocate register map: %d\n", ret); + i2c_unregister_device(chip->companion); return ret; } i2c_set_clientdata(chip->companion, chip); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 49bb445d846a..33834120d057 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -59,6 +59,14 @@ config MFD_AAT2870_CORE additional drivers must be enabled in order to use the functionality of the device. +config MFD_BCM590XX + tristate "Broadcom BCM590xx PMUs" + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + Support for the BCM590xx PMUs from Broadcom + config MFD_CROS_EC tristate "ChromeOS Embedded Controller" select MFD_CORE @@ -100,7 +108,7 @@ config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y help - Say yes here to support for Dialog Semiconductor DA9030 (a.k.a + Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC usually found on PXA processors-based platforms. This includes the I2C driver and the core APIs _only_, you have to select @@ -270,13 +278,18 @@ config MFD_KEMPLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: + * COMe-bHL6 * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) + * COMe-cBT6 * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) + * COMe-cHL6 * COMe-cPC2 (microETXexpress-PC) + * COMe-mBT10 * COMe-mCT10 + * COMe-mTT10 (nanoETXexpress-TT) * ETX-OH This driver can also be built as a module. If so, the module @@ -322,9 +335,10 @@ config MFD_MAX14577 depends on I2C=y select MFD_CORE select REGMAP_I2C + select REGMAP_IRQ select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX14577. + Say yes here to add support for Maxim Semiconductor MAX14577. This is a Micro-USB IC with Charger controls on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality @@ -337,7 +351,7 @@ config MFD_MAX77686 select REGMAP_I2C select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX77686. + Say yes here to add support for Maxim Semiconductor MAX77686. This is a Power Management IC with RTC on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality @@ -349,7 +363,7 @@ config MFD_MAX77693 select MFD_CORE select REGMAP_I2C help - Say yes here to support for Maxim Semiconductor MAX77693. + Say yes here to add support for Maxim Semiconductor MAX77693. This is a companion Power Management IC with Flash, Haptic, Charger, and MUIC(Micro USB Interface Controller) controls on chip. This driver provides common support for accessing the device; @@ -363,7 +377,7 @@ config MFD_MAX8907 select REGMAP_I2C select REGMAP_IRQ help - Say yes here to support for Maxim Semiconductor MAX8907. This is + Say yes here to add support for Maxim Semiconductor MAX8907. This is a Power Management IC. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. @@ -373,7 +387,7 @@ config MFD_MAX8925 depends on I2C=y select MFD_CORE help - Say yes here to support for Maxim Semiconductor MAX8925. This is + Say yes here to add support for Maxim Semiconductor MAX8925. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -384,7 +398,7 @@ config MFD_MAX8997 select MFD_CORE select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX8997/8966. + Say yes here to add support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; @@ -397,7 +411,7 @@ config MFD_MAX8998 select MFD_CORE select IRQ_DOMAIN help - Say yes here to support for Maxim Semiconductor MAX8998 and + Say yes here to add support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality @@ -473,10 +487,11 @@ config MFD_PM8XXX config MFD_PM8921_CORE tristate "Qualcomm PM8921 PMIC chip" - depends on (ARCH_MSM || HEXAGON) - depends on BROKEN + depends on (ARM || HEXAGON) + select IRQ_DOMAIN select MFD_CORE select MFD_PM8XXX + select REGMAP help If you say yes to this option, support will be included for the built-in PM8921 PMIC chip. @@ -487,16 +502,6 @@ config MFD_PM8921_CORE Say M here if you want to include support for PM8921 chip as a module. This will build a module called "pm8921-core". -config MFD_PM8XXX_IRQ - bool "Qualcomm PM8xxx IRQ features" - depends on MFD_PM8XXX - default y if MFD_PM8XXX - help - This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. - - This is required to use certain other PM 8xxx features, such as GPIO - and MPP. - config MFD_RDC321X tristate "RDC R-321x southbridge" select MFD_CORE @@ -516,6 +521,16 @@ config MFD_RTSX_PCI types of memory cards, such as Memory Stick, Memory Stick Pro, Secure Digital and MultiMediaCard. +config MFD_RTSX_USB + tristate "Realtek USB card reader" + depends on USB + select MFD_CORE + help + Select this option to get support for Realtek USB 2.0 card readers + including RTS5129, RTS5139, RTS5179 and RTS5170. + Realtek card reader supports access to many types of memory cards, + such as Memory Stick Pro, Secure Digital and MultiMediaCard. + config MFD_RC5T583 bool "Ricoh RC5T583 Power Management system device" depends on I2C=y @@ -774,17 +789,6 @@ config MFD_PALMAS If you say yes here you get support for the Palmas series of PMIC chips from Texas Instruments. -config MFD_TI_SSP - tristate "TI Sequencer Serial Port support" - depends on ARCH_DAVINCI_TNETV107X - select MFD_CORE - ---help--- - Say Y here if you want support for the Sequencer Serial Port - in a Texas Instruments TNETV107X SoC. - - To compile this driver as a module, choose M here: the - module will be called ti-ssp. - config TPS6105X tristate "TI TPS61050/61052 Boost Converters" depends on I2C @@ -853,6 +857,22 @@ config MFD_TPS65217 This driver can also be built as a module. If so, the module will be called tps65217. +config MFD_TPS65218 + tristate "TI TPS65218 Power Management chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the TPS65218 series of + Power Management chips. + These include voltage regulators, gpio and other features + that are often used in portable devices. Only regulator + component is currently supported. + + This driver can also be built as a module. If so, the module + will be called tps65218. + config MFD_TPS6586X bool "TI TPS6586x Power Management chips" depends on I2C=y @@ -935,16 +955,6 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. -config TWL4030_MADC - tristate "TI TWL4030 MADC" - depends on TWL4030_CORE - help - This driver provides support for triton TWL4030-MADC. The - driver supports both RT and SW conversion methods. - - This driver can be built as a module. If so it will be - named twl4030-madc - config TWL4030_POWER bool "TI TWL4030 power resources" depends on TWL4030_CORE && ARM @@ -1193,9 +1203,6 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. -endmenu -endif - menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 @@ -1226,3 +1233,6 @@ config VEXPRESS_CONFIG help Platform configuration infrastructure for the ARM Ltd. Versatile Express. + +endmenu +endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5aea5ef0a62f..2851275e2656 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -8,12 +8,14 @@ obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o +obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o +obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o @@ -21,7 +23,6 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o -obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o @@ -62,6 +63,7 @@ obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o obj-$(CONFIG_MFD_TPS65217) += tps65217.o +obj-$(CONFIG_MFD_TPS65218) += tps65218.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o @@ -71,7 +73,6 @@ obj-$(CONFIG_MFD_TPS80031) += tps80031.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o -obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o obj-$(CONFIG_TWL6040_CORE) += twl6040.o @@ -150,7 +151,6 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o -obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c index 62501553d63c..f495b8b57dd7 100644 --- a/drivers/mfd/adp5520.c +++ b/drivers/mfd/adp5520.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c index c71ff0af1547..39fa554f13bb 100644 --- a/drivers/mfd/as3722.c +++ b/drivers/mfd/as3722.c @@ -277,6 +277,7 @@ static const struct regmap_range as3722_readable_ranges[] = { regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG), regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG), regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG), + regmap_reg_range(AS3722_FUSE7_REG, AS3722_FUSE7_REG), }; static const struct regmap_access_table as3722_readable_table = { diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c new file mode 100644 index 000000000000..e9a33c79431b --- /dev/null +++ b/drivers/mfd/bcm590xx.c @@ -0,0 +1,93 @@ +/* + * Broadcom BCM590xx PMU + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter <mporter@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/mfd/bcm590xx.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +static const struct mfd_cell bcm590xx_devs[] = { + { + .name = "bcm590xx-vregs", + }, +}; + +static const struct regmap_config bcm590xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = BCM590XX_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + +static int bcm590xx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct bcm590xx *bcm590xx; + int ret; + + bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL); + if (!bcm590xx) + return -ENOMEM; + + i2c_set_clientdata(i2c, bcm590xx); + bcm590xx->dev = &i2c->dev; + bcm590xx->i2c_client = i2c; + + bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config); + if (IS_ERR(bcm590xx->regmap)) { + ret = PTR_ERR(bcm590xx->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + return ret; + } + + ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs, + ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL); + if (ret < 0) + dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret); + + return ret; +} + +static const struct of_device_id bcm590xx_of_match[] = { + { .compatible = "brcm,bcm59056" }, + { } +}; +MODULE_DEVICE_TABLE(of, bcm590xx_of_match); + +static const struct i2c_device_id bcm590xx_i2c_id[] = { + { "bcm59056" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id); + +static struct i2c_driver bcm590xx_i2c_driver = { + .driver = { + .name = "bcm590xx", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(bcm590xx_of_match), + }, + .probe = bcm590xx_i2c_probe, + .id_table = bcm590xx_i2c_id, +}; +module_i2c_driver(bcm590xx_i2c_driver); + +MODULE_AUTHOR("Matt Porter <mporter@linaro.org>"); +MODULE_DESCRIPTION("BCM590xx multi-function driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bcm590xx"); diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index 17c13012686a..be91cb5d6e78 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -23,7 +23,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/mfd/core.h> #include <linux/module.h> #include <linux/pci.h> diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 25838f10b35b..e8af816d73a9 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -279,6 +279,9 @@ static bool da9052_reg_volatile(struct device *dev, unsigned int reg) case DA9052_EVENT_B_REG: case DA9052_EVENT_C_REG: case DA9052_EVENT_D_REG: + case DA9052_CONTROL_B_REG: + case DA9052_CONTROL_D_REG: + case DA9052_SUPPLY_REG: case DA9052_FAULTLOG_REG: case DA9052_CHG_TIME_REG: case DA9052_ADC_RES_L_REG: diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index c319c4ef5d49..6da8ec8ff800 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -75,6 +75,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) DA9052_PARK_REGISTER, &val); break; + case DA9053_BC: default: /* * For other chips parking of I2C register @@ -114,6 +115,7 @@ static const struct i2c_device_id da9052_i2c_id[] = { {"da9053-aa", DA9053_AA}, {"da9053-ba", DA9053_BA}, {"da9053-bb", DA9053_BB}, + {"da9053-bc", DA9053_BC}, {} }; @@ -121,8 +123,9 @@ static const struct i2c_device_id da9052_i2c_id[] = { static const struct of_device_id dialog_dt_ids[] = { { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] }, { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] }, - { .compatible = "dlg,da9053-ab", .data = &da9052_i2c_id[2] }, + { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] }, { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] }, + { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] }, { /* sentinel */ } }; #endif diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c index 0680bcbc53de..17666b40b70c 100644 --- a/drivers/mfd/da9052-spi.c +++ b/drivers/mfd/da9052-spi.c @@ -71,6 +71,7 @@ static struct spi_device_id da9052_spi_id[] = { {"da9053-aa", DA9053_AA}, {"da9053-ba", DA9053_BA}, {"da9053-bb", DA9053_BB}, + {"da9053-bc", DA9053_BC}, {} }; diff --git a/drivers/mfd/da9055-i2c.c b/drivers/mfd/da9055-i2c.c index 8103e4362132..d4d4c165eb95 100644 --- a/drivers/mfd/da9055-i2c.c +++ b/drivers/mfd/da9055-i2c.c @@ -15,6 +15,8 @@ #include <linux/device.h> #include <linux/i2c.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/mfd/da9055/core.h> @@ -66,6 +68,11 @@ static struct i2c_device_id da9055_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, da9055_i2c_id); +static const struct of_device_id da9055_of_match[] = { + { .compatible = "dlg,da9055-pmic", }, + { } +}; + static struct i2c_driver da9055_i2c_driver = { .probe = da9055_i2c_probe, .remove = da9055_i2c_remove, @@ -73,6 +80,7 @@ static struct i2c_driver da9055_i2c_driver = { .driver = { .name = "da9055-pmic", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(da9055_of_match), }, }; diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index 26937cd01071..e70ae315abc7 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -110,7 +110,7 @@ static const struct mfd_cell da9063_devs[] = { int da9063_device_init(struct da9063 *da9063, unsigned int irq) { struct da9063_pdata *pdata = da9063->dev->platform_data; - int model, revision; + int model, variant_id, variant_code; int ret; if (pdata) { @@ -141,23 +141,26 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) return -ENODEV; } - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &revision); + ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id); if (ret < 0) { - dev_err(da9063->dev, "Cannot read chip revision id.\n"); + dev_err(da9063->dev, "Cannot read chip variant id.\n"); return -EIO; } - revision >>= DA9063_CHIP_VARIANT_SHIFT; - if (revision != 3) { - dev_err(da9063->dev, "Unknown chip revision: %d\n", revision); + + variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT; + + dev_info(da9063->dev, + "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", + model, variant_id); + + if (variant_code != PMIC_DA9063_BB) { + dev_err(da9063->dev, "Unknown chip variant code: 0x%02X\n", + variant_code); return -ENODEV; } da9063->model = model; - da9063->revision = revision; - - dev_info(da9063->dev, - "Device detected (model-ID: 0x%02X rev-ID: 0x%02X)\n", - model, revision); + da9063->variant_code = variant_code; ret = da9063_irq_init(da9063); if (ret) { diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 81b7d88af313..433f823037dd 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/pci.h> #include <linux/interrupt.h> #include <linux/delay.h> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index d3e23278d299..07692604e119 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -322,9 +322,12 @@ static int kempld_detect_device(struct kempld_device_data *pld) return -ENODEV; } - /* Release hardware mutex if aquired */ - if (!(index_reg & KEMPLD_MUTEX_KEY)) + /* Release hardware mutex if acquired */ + if (!(index_reg & KEMPLD_MUTEX_KEY)) { iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); + /* PXT and COMe-cPC2 boards may require a second release */ + iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); + } mutex_unlock(&pld->lock); @@ -438,6 +441,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "CHL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "CHR2", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), @@ -510,6 +521,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "CVV6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "FRI2", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), @@ -533,6 +552,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "MVV1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "NTC1", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index be93fa261ded..3f10ea3f45d1 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -58,7 +58,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> @@ -72,9 +71,11 @@ #define ACPIBASE_GPE_END 0x2f #define ACPIBASE_SMI_OFF 0x30 #define ACPIBASE_SMI_END 0x33 +#define ACPIBASE_PMC_OFF 0x08 +#define ACPIBASE_PMC_END 0x0c #define ACPIBASE_TCO_OFF 0x60 #define ACPIBASE_TCO_END 0x7f -#define ACPICTRL 0x44 +#define ACPICTRL_PMCBASE 0x44 #define ACPIBASE_GCS_OFF 0x3410 #define ACPIBASE_GCS_END 0x3414 @@ -90,16 +91,17 @@ #define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i) #define wdt_res(b, i) (&wdt_ich_res[(b) + (i)]) -struct lpc_ich_cfg { - int base; - int ctrl; - int save; -}; - struct lpc_ich_priv { int chipset; - struct lpc_ich_cfg acpi; - struct lpc_ich_cfg gpio; + + int abase; /* ACPI base */ + int actrl_pbase; /* ACPI control or PMC base */ + int gbase; /* GPIO base */ + int gctrl; /* GPIO control */ + + int abase_save; /* Cached ACPI base value */ + int actrl_pbase_save; /* Cached ACPI control or PMC base value */ + int gctrl_save; /* Cached GPIO control value */ }; static struct resource wdt_ich_res[] = { @@ -111,7 +113,7 @@ static struct resource wdt_ich_res[] = { { .flags = IORESOURCE_IO, }, - /* GCS */ + /* GCS or PMC */ { .flags = IORESOURCE_MEM, }, @@ -211,6 +213,7 @@ enum lpc_chipsets { LPC_LPT_LP, /* Lynx Point-LP */ LPC_WBG, /* Wellsburg */ LPC_AVN, /* Avoton SoC */ + LPC_BAYTRAIL, /* Bay Trail SoC */ LPC_COLETO, /* Coleto Creek */ LPC_WPT_LP, /* Wildcat Point-LP */ }; @@ -303,6 +306,7 @@ static struct lpc_ich_info lpc_chipset_info[] = { [LPC_NM10] = { .name = "NM10", .iTCO_version = 2, + .gpio_version = ICH_V7_GPIO, }, [LPC_ICH8] = { .name = "ICH8 or ICH8R", @@ -499,7 +503,12 @@ static struct lpc_ich_info lpc_chipset_info[] = { }, [LPC_AVN] = { .name = "Avoton SoC", - .iTCO_version = 1, + .iTCO_version = 3, + .gpio_version = AVOTON_GPIO, + }, + [LPC_BAYTRAIL] = { + .name = "Bay Trail SoC", + .iTCO_version = 3, }, [LPC_COLETO] = { .name = "Coleto Creek", @@ -726,6 +735,7 @@ static const struct pci_device_id lpc_ich_ids[] = { { PCI_VDEVICE(INTEL, 0x1f39), LPC_AVN}, { PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN}, { PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN}, + { PCI_VDEVICE(INTEL, 0x0f1c), LPC_BAYTRAIL}, { PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO}, { PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP}, { PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP}, @@ -742,14 +752,20 @@ static void lpc_ich_restore_config_space(struct pci_dev *dev) { struct lpc_ich_priv *priv = pci_get_drvdata(dev); - if (priv->acpi.save >= 0) { - pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save); - priv->acpi.save = -1; + if (priv->abase_save >= 0) { + pci_write_config_byte(dev, priv->abase, priv->abase_save); + priv->abase_save = -1; + } + + if (priv->actrl_pbase_save >= 0) { + pci_write_config_byte(dev, priv->actrl_pbase, + priv->actrl_pbase_save); + priv->actrl_pbase_save = -1; } - if (priv->gpio.save >= 0) { - pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save); - priv->gpio.save = -1; + if (priv->gctrl_save >= 0) { + pci_write_config_byte(dev, priv->gctrl, priv->gctrl_save); + priv->gctrl_save = -1; } } @@ -758,9 +774,26 @@ static void lpc_ich_enable_acpi_space(struct pci_dev *dev) struct lpc_ich_priv *priv = pci_get_drvdata(dev); u8 reg_save; - pci_read_config_byte(dev, priv->acpi.ctrl, ®_save); - pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10); - priv->acpi.save = reg_save; + switch (lpc_chipset_info[priv->chipset].iTCO_version) { + case 3: + /* + * Some chipsets (eg Avoton) enable the ACPI space in the + * ACPI BASE register. + */ + pci_read_config_byte(dev, priv->abase, ®_save); + pci_write_config_byte(dev, priv->abase, reg_save | 0x2); + priv->abase_save = reg_save; + break; + default: + /* + * Most chipsets enable the ACPI space in the ACPI control + * register. + */ + pci_read_config_byte(dev, priv->actrl_pbase, ®_save); + pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x80); + priv->actrl_pbase_save = reg_save; + break; + } } static void lpc_ich_enable_gpio_space(struct pci_dev *dev) @@ -768,9 +801,20 @@ static void lpc_ich_enable_gpio_space(struct pci_dev *dev) struct lpc_ich_priv *priv = pci_get_drvdata(dev); u8 reg_save; - pci_read_config_byte(dev, priv->gpio.ctrl, ®_save); - pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10); - priv->gpio.save = reg_save; + pci_read_config_byte(dev, priv->gctrl, ®_save); + pci_write_config_byte(dev, priv->gctrl, reg_save | 0x10); + priv->gctrl_save = reg_save; +} + +static void lpc_ich_enable_pmc_space(struct pci_dev *dev) +{ + struct lpc_ich_priv *priv = pci_get_drvdata(dev); + u8 reg_save; + + pci_read_config_byte(dev, priv->actrl_pbase, ®_save); + pci_write_config_byte(dev, priv->actrl_pbase, reg_save | 0x2); + + priv->actrl_pbase_save = reg_save; } static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell) @@ -815,7 +859,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev) struct resource *res; /* Setup power management base register */ - pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg); + pci_read_config_dword(dev, priv->abase, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n"); @@ -841,7 +885,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev) gpe0_done: /* Setup GPIO base register */ - pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg); + pci_read_config_dword(dev, priv->gbase, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n"); @@ -891,7 +935,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev) struct resource *res; /* Setup power management base register */ - pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg); + pci_read_config_dword(dev, priv->abase, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n"); @@ -910,14 +954,20 @@ static int lpc_ich_init_wdt(struct pci_dev *dev) lpc_ich_enable_acpi_space(dev); /* + * iTCO v2: * Get the Memory-Mapped GCS register. To get access to it * we have to read RCBA from PCI Config space 0xf0 and use * it as base. GCS = RCBA + ICH6_GCS(0x3410). + * + * iTCO v3: + * Get the Power Management Configuration register. To get access + * to it we have to read the PMC BASE from config space and address + * the register at offset 0x8. */ if (lpc_chipset_info[priv->chipset].iTCO_version == 1) { /* Don't register iomem for TCO ver 1 */ lpc_ich_cells[LPC_WDT].num_resources--; - } else { + } else if (lpc_chipset_info[priv->chipset].iTCO_version == 2) { pci_read_config_dword(dev, RCBABASE, &base_addr_cfg); base_addr = base_addr_cfg & 0xffffc000; if (!(base_addr_cfg & 1)) { @@ -926,9 +976,17 @@ static int lpc_ich_init_wdt(struct pci_dev *dev) ret = -ENODEV; goto wdt_done; } - res = wdt_mem_res(ICH_RES_MEM_GCS); + res = wdt_mem_res(ICH_RES_MEM_GCS_PMC); res->start = base_addr + ACPIBASE_GCS_OFF; res->end = base_addr + ACPIBASE_GCS_END; + } else if (lpc_chipset_info[priv->chipset].iTCO_version == 3) { + lpc_ich_enable_pmc_space(dev); + pci_read_config_dword(dev, ACPICTRL_PMCBASE, &base_addr_cfg); + base_addr = base_addr_cfg & 0xfffffe00; + + res = wdt_mem_res(ICH_RES_MEM_GCS_PMC); + res->start = base_addr + ACPIBASE_PMC_OFF; + res->end = base_addr + ACPIBASE_PMC_END; } lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]); @@ -952,28 +1010,35 @@ static int lpc_ich_probe(struct pci_dev *dev, return -ENOMEM; priv->chipset = id->driver_data; - priv->acpi.save = -1; - priv->acpi.base = ACPIBASE; - priv->acpi.ctrl = ACPICTRL; - priv->gpio.save = -1; + priv->actrl_pbase_save = -1; + priv->abase_save = -1; + + priv->abase = ACPIBASE; + priv->actrl_pbase = ACPICTRL_PMCBASE; + + priv->gctrl_save = -1; if (priv->chipset <= LPC_ICH5) { - priv->gpio.base = GPIOBASE_ICH0; - priv->gpio.ctrl = GPIOCTRL_ICH0; + priv->gbase = GPIOBASE_ICH0; + priv->gctrl = GPIOCTRL_ICH0; } else { - priv->gpio.base = GPIOBASE_ICH6; - priv->gpio.ctrl = GPIOCTRL_ICH6; + priv->gbase = GPIOBASE_ICH6; + priv->gctrl = GPIOCTRL_ICH6; } pci_set_drvdata(dev, priv); - ret = lpc_ich_init_wdt(dev); - if (!ret) - cell_added = true; + if (lpc_chipset_info[priv->chipset].iTCO_version) { + ret = lpc_ich_init_wdt(dev); + if (!ret) + cell_added = true; + } - ret = lpc_ich_init_gpio(dev); - if (!ret) - cell_added = true; + if (lpc_chipset_info[priv->chipset].gpio_version) { + ret = lpc_ich_init_gpio(dev); + if (!ret) + cell_added = true; + } /* * We only care if at least one or none of the cells registered diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 3bb05c03c68d..4ee755034f3b 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -23,7 +23,6 @@ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index 71aa14a6bfbb..5f13cefe8def 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -18,6 +18,7 @@ * This driver is based on max8997.c */ +#include <linux/err.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/mfd/core.h> @@ -25,7 +26,10 @@ #include <linux/mfd/max14577-private.h> static struct mfd_cell max14577_devs[] = { - { .name = "max14577-muic", }, + { + .name = "max14577-muic", + .of_compatible = "maxim,max14577-muic", + }, { .name = "max14577-regulator", .of_compatible = "maxim,max14577-regulator", diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index f53d5823a3f7..e5fce765accb 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -121,6 +121,10 @@ static int max77686_i2c_probe(struct i2c_client *i2c, dev_info(max77686->dev, "device found\n"); max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC); + if (!max77686->rtc) { + dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n"); + return -ENODEV; + } i2c_set_clientdata(max77686->rtc, max77686); max77686_irq_init(max77686); diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index e0859987ab6b..c5535f018466 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -148,9 +148,18 @@ static int max77693_i2c_probe(struct i2c_client *i2c, dev_info(max77693->dev, "device ID: 0x%x\n", reg_data); max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC); + if (!max77693->muic) { + dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n"); + return -ENODEV; + } i2c_set_clientdata(max77693->muic, max77693); max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC); + if (!max77693->haptic) { + dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n"); + ret = -ENODEV; + goto err_i2c_haptic; + } i2c_set_clientdata(max77693->haptic, max77693); /* @@ -184,8 +193,9 @@ err_mfd: max77693_irq_exit(max77693); err_irq: err_regmap_muic: - i2c_unregister_device(max77693->muic); i2c_unregister_device(max77693->haptic); +err_i2c_haptic: + i2c_unregister_device(max77693->muic); return ret; } diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c index 176aa26fc787..a83eed5c15ca 100644 --- a/drivers/mfd/max8925-i2c.c +++ b/drivers/mfd/max8925-i2c.c @@ -181,9 +181,18 @@ static int max8925_probe(struct i2c_client *client, mutex_init(&chip->io_lock); chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR); + if (!chip->rtc) { + dev_err(chip->dev, "Failed to allocate I2C device for RTC\n"); + return -ENODEV; + } i2c_set_clientdata(chip->rtc, chip); chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR); + if (!chip->adc) { + dev_err(chip->dev, "Failed to allocate I2C device for ADC\n"); + i2c_unregister_device(chip->rtc); + return -ENODEV; + } i2c_set_clientdata(chip->adc, chip); device_init_wakeup(&client->dev, 1); diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 5adede0fb04c..8cf7a015cfe5 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -208,10 +208,26 @@ static int max8997_i2c_probe(struct i2c_client *i2c, mutex_init(&max8997->iolock); max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC); + if (!max8997->rtc) { + dev_err(max8997->dev, "Failed to allocate I2C device for RTC\n"); + return -ENODEV; + } i2c_set_clientdata(max8997->rtc, max8997); + max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC); + if (!max8997->haptic) { + dev_err(max8997->dev, "Failed to allocate I2C device for Haptic\n"); + ret = -ENODEV; + goto err_i2c_haptic; + } i2c_set_clientdata(max8997->haptic, max8997); + max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC); + if (!max8997->muic) { + dev_err(max8997->dev, "Failed to allocate I2C device for MUIC\n"); + ret = -ENODEV; + goto err_i2c_muic; + } i2c_set_clientdata(max8997->muic, max8997); pm_runtime_set_active(max8997->dev); @@ -239,7 +255,9 @@ static int max8997_i2c_probe(struct i2c_client *i2c, err_mfd: mfd_remove_devices(max8997->dev); i2c_unregister_device(max8997->muic); +err_i2c_muic: i2c_unregister_device(max8997->haptic); +err_i2c_haptic: i2c_unregister_device(max8997->rtc); return ret; } diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 5d5e186b5d8b..592db06098e6 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -215,6 +215,10 @@ static int max8998_i2c_probe(struct i2c_client *i2c, mutex_init(&max8998->iolock); max8998->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); + if (!max8998->rtc) { + dev_err(&i2c->dev, "Failed to allocate I2C device for RTC\n"); + return -ENODEV; + } i2c_set_clientdata(max8998->rtc, max8998); max8998_irq_init(max8998); diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c index 38ab67829791..702925e242c9 100644 --- a/drivers/mfd/mc13xxx-spi.c +++ b/drivers/mfd/mc13xxx-spi.c @@ -140,6 +140,11 @@ static int mc13xxx_spi_probe(struct spi_device *spi) mc13xxx->irq = spi->irq; + spi->max_speed_hz = spi->max_speed_hz ? : 26000000; + ret = spi_setup(spi); + if (ret) + return ret; + mc13xxx->regmap = devm_regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev, &mc13xxx_regmap_spi_config); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 41c31b3ac940..29d76986b40b 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -12,7 +12,6 @@ * MCP read/write timeouts from Jordi Colomer, rehacked by rmk. */ #include <linux/module.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 90b630ccc8bc..651e249287dc 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -665,55 +665,78 @@ static int usbhs_omap_probe(struct platform_device *pdev) goto err_mem; } - need_logic_fck = false; + /* Set all clocks as invalid to begin with */ + omap->ehci_logic_fck = ERR_PTR(-ENODEV); + omap->init_60m_fclk = ERR_PTR(-ENODEV); + omap->utmi_p1_gfclk = ERR_PTR(-ENODEV); + omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); + omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV); + omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); + for (i = 0; i < omap->nports; i++) { - if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) || - is_ehci_hsic_mode(i)) - need_logic_fck |= true; + omap->utmi_clk[i] = ERR_PTR(-ENODEV); + omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); + omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); } - omap->ehci_logic_fck = ERR_PTR(-EINVAL); - if (need_logic_fck) { - omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck"); - if (IS_ERR(omap->ehci_logic_fck)) { - ret = PTR_ERR(omap->ehci_logic_fck); - dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret); + /* for OMAP3 i.e. USBHS REV1 */ + if (omap->usbhs_rev == OMAP_USBHS_REV1) { + need_logic_fck = false; + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(pdata->port_mode[i]) || + is_ehci_tll_mode(pdata->port_mode[i]) || + is_ehci_hsic_mode(pdata->port_mode[i])) + + need_logic_fck |= true; } + + if (need_logic_fck) { + omap->ehci_logic_fck = devm_clk_get(dev, + "usbhost_120m_fck"); + if (IS_ERR(omap->ehci_logic_fck)) { + ret = PTR_ERR(omap->ehci_logic_fck); + dev_err(dev, "usbhost_120m_fck failed:%d\n", + ret); + goto err_mem; + } + } + goto initialize; } - omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk"); + /* for OMAP4+ i.e. USBHS REV2+ */ + omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(omap->utmi_p1_gfclk)) { ret = PTR_ERR(omap->utmi_p1_gfclk); dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_p1_gfclk; + goto err_mem; } - omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk"); + omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk"); if (IS_ERR(omap->utmi_p2_gfclk)) { ret = PTR_ERR(omap->utmi_p2_gfclk); dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_p2_gfclk; + goto err_mem; } - omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); + omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1"); if (IS_ERR(omap->xclk60mhsp1_ck)) { ret = PTR_ERR(omap->xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_xclk60mhsp1; + dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret); + goto err_mem; } - omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); + omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2"); if (IS_ERR(omap->xclk60mhsp2_ck)) { ret = PTR_ERR(omap->xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_xclk60mhsp2; + dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret); + goto err_mem; } - omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); + omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int"); if (IS_ERR(omap->init_60m_fclk)) { ret = PTR_ERR(omap->init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_init60m; + dev_err(dev, "refclk_60m_int failed error:%d\n", ret); + goto err_mem; } for (i = 0; i < omap->nports; i++) { @@ -727,55 +750,72 @@ static int usbhs_omap_probe(struct platform_device *pdev) * platforms have all clocks and we can function without * them */ - omap->utmi_clk[i] = clk_get(dev, clkname); - if (IS_ERR(omap->utmi_clk[i])) - dev_dbg(dev, "Failed to get clock : %s : %ld\n", - clkname, PTR_ERR(omap->utmi_clk[i])); + omap->utmi_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->utmi_clk[i])) { + ret = PTR_ERR(omap->utmi_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } snprintf(clkname, sizeof(clkname), "usb_host_hs_hsic480m_p%d_clk", i + 1); - omap->hsic480m_clk[i] = clk_get(dev, clkname); - if (IS_ERR(omap->hsic480m_clk[i])) - dev_dbg(dev, "Failed to get clock : %s : %ld\n", - clkname, PTR_ERR(omap->hsic480m_clk[i])); + omap->hsic480m_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->hsic480m_clk[i])) { + ret = PTR_ERR(omap->hsic480m_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } snprintf(clkname, sizeof(clkname), "usb_host_hs_hsic60m_p%d_clk", i + 1); - omap->hsic60m_clk[i] = clk_get(dev, clkname); - if (IS_ERR(omap->hsic60m_clk[i])) - dev_dbg(dev, "Failed to get clock : %s : %ld\n", - clkname, PTR_ERR(omap->hsic60m_clk[i])); + omap->hsic60m_clk[i] = devm_clk_get(dev, clkname); + if (IS_ERR(omap->hsic60m_clk[i])) { + ret = PTR_ERR(omap->hsic60m_clk[i]); + dev_err(dev, "Failed to get clock : %s : %d\n", + clkname, ret); + goto err_mem; + } } if (is_ehci_phy_mode(pdata->port_mode[0])) { - /* for OMAP3, clk_set_parent fails */ ret = clk_set_parent(omap->utmi_p1_gfclk, omap->xclk60mhsp1_ck); - if (ret != 0) - dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n", - ret); + if (ret != 0) { + dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n", + ret); + goto err_mem; + } } else if (is_ehci_tll_mode(pdata->port_mode[0])) { ret = clk_set_parent(omap->utmi_p1_gfclk, omap->init_60m_fclk); - if (ret != 0) - dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n", - ret); + if (ret != 0) { + dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n", + ret); + goto err_mem; + } } if (is_ehci_phy_mode(pdata->port_mode[1])) { ret = clk_set_parent(omap->utmi_p2_gfclk, omap->xclk60mhsp2_ck); - if (ret != 0) - dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n", - ret); + if (ret != 0) { + dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n", + ret); + goto err_mem; + } } else if (is_ehci_tll_mode(pdata->port_mode[1])) { ret = clk_set_parent(omap->utmi_p2_gfclk, omap->init_60m_fclk); - if (ret != 0) - dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n", - ret); + if (ret != 0) { + dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n", + ret); + goto err_mem; + } } +initialize: omap_usbhs_init(dev); if (dev->of_node) { @@ -784,7 +824,7 @@ static int usbhs_omap_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "Failed to create DT children: %d\n", ret); - goto err_alloc; + goto err_mem; } } else { @@ -792,40 +832,12 @@ static int usbhs_omap_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", ret); - goto err_alloc; + goto err_mem; } } return 0; -err_alloc: - for (i = 0; i < omap->nports; i++) { - if (!IS_ERR(omap->utmi_clk[i])) - clk_put(omap->utmi_clk[i]); - if (!IS_ERR(omap->hsic60m_clk[i])) - clk_put(omap->hsic60m_clk[i]); - if (!IS_ERR(omap->hsic480m_clk[i])) - clk_put(omap->hsic480m_clk[i]); - } - - clk_put(omap->init_60m_fclk); - -err_init60m: - clk_put(omap->xclk60mhsp2_ck); - -err_xclk60mhsp2: - clk_put(omap->xclk60mhsp1_ck); - -err_xclk60mhsp1: - clk_put(omap->utmi_p2_gfclk); - -err_p2_gfclk: - clk_put(omap->utmi_p1_gfclk); - -err_p1_gfclk: - if (!IS_ERR(omap->ehci_logic_fck)) - clk_put(omap->ehci_logic_fck); - err_mem: pm_runtime_disable(dev); @@ -847,27 +859,6 @@ static int usbhs_omap_remove_child(struct device *dev, void *data) */ static int usbhs_omap_remove(struct platform_device *pdev) { - struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < omap->nports; i++) { - if (!IS_ERR(omap->utmi_clk[i])) - clk_put(omap->utmi_clk[i]); - if (!IS_ERR(omap->hsic60m_clk[i])) - clk_put(omap->hsic60m_clk[i]); - if (!IS_ERR(omap->hsic480m_clk[i])) - clk_put(omap->hsic480m_clk[i]); - } - - clk_put(omap->init_60m_fclk); - clk_put(omap->utmi_p1_gfclk); - clk_put(omap->utmi_p2_gfclk); - clk_put(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp1_ck); - - if (!IS_ERR(omap->ehci_logic_fck)) - clk_put(omap->ehci_logic_fck); - pm_runtime_disable(&pdev->dev); /* remove children */ diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c index 5ee50f779ef6..532eacab6b46 100644 --- a/drivers/mfd/omap-usb-tll.c +++ b/drivers/mfd/omap-usb-tll.c @@ -252,7 +252,7 @@ static int usbtll_omap_probe(struct platform_device *pdev) break; } - tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]), + tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch, GFP_KERNEL); if (!tll->ch_clk) { ret = -ENOMEM; diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c index b8941a556d71..c1984b0d1b65 100644 --- a/drivers/mfd/pcf50633-adc.c +++ b/drivers/mfd/pcf50633-adc.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/completion.h> diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c index 484fe66e6c88..b97a97187ae9 100644 --- a/drivers/mfd/pm8921-core.c +++ b/drivers/mfd/pm8921-core.c @@ -14,23 +14,316 @@ #define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/ssbi.h> +#include <linux/regmap.h> +#include <linux/of_platform.h> #include <linux/mfd/core.h> -#include <linux/mfd/pm8xxx/pm8921.h> #include <linux/mfd/pm8xxx/core.h> +#define SSBI_REG_ADDR_IRQ_BASE 0x1BB + +#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0) +#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1) +#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2) +#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3) +#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4) +#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5) +#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6) +#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7) +#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8) + +#define PM_IRQF_LVL_SEL 0x01 /* level select */ +#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */ +#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */ +#define PM_IRQF_CLR 0x08 /* clear interrupt */ +#define PM_IRQF_BITS_MASK 0x70 +#define PM_IRQF_BITS_SHIFT 4 +#define PM_IRQF_WRITE 0x80 + +#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \ + PM_IRQF_MASK_RE) + #define REG_HWREV 0x002 /* PMIC4 revision */ #define REG_HWREV_2 0x0E8 /* PMIC4 revision 2 */ +#define PM8921_NR_IRQS 256 + +struct pm_irq_chip { + struct device *dev; + struct regmap *regmap; + spinlock_t pm_irq_lock; + struct irq_domain *irqdomain; + unsigned int num_irqs; + unsigned int num_blocks; + unsigned int num_masters; + u8 config[0]; +}; + struct pm8921 { struct device *dev; struct pm_irq_chip *irq_chip; }; +static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp, + unsigned int *ip) +{ + int rc; + + spin_lock(&chip->pm_irq_lock); + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp); + if (rc) { + pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); + goto bail; + } + + rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_IT_STATUS, ip); + if (rc) + pr_err("Failed Reading Status rc=%d\n", rc); +bail: + spin_unlock(&chip->pm_irq_lock); + return rc; +} + +static int +pm8xxx_config_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int cp) +{ + int rc; + + spin_lock(&chip->pm_irq_lock); + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, bp); + if (rc) { + pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); + goto bail; + } + + cp |= PM_IRQF_WRITE; + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_CONFIG, cp); + if (rc) + pr_err("Failed Configuring IRQ rc=%d\n", rc); +bail: + spin_unlock(&chip->pm_irq_lock); + return rc; +} + +static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block) +{ + int pmirq, irq, i, ret = 0; + unsigned int bits; + + ret = pm8xxx_read_block_irq(chip, block, &bits); + if (ret) { + pr_err("Failed reading %d block ret=%d", block, ret); + return ret; + } + if (!bits) { + pr_err("block bit set in master but no irqs: %d", block); + return 0; + } + + /* Check IRQ bits */ + for (i = 0; i < 8; i++) { + if (bits & (1 << i)) { + pmirq = block * 8 + i; + irq = irq_find_mapping(chip->irqdomain, pmirq); + generic_handle_irq(irq); + } + } + return 0; +} + +static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master) +{ + unsigned int blockbits; + int block_number, i, ret = 0; + + ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_M_STATUS1 + master, + &blockbits); + if (ret) { + pr_err("Failed to read master %d ret=%d\n", master, ret); + return ret; + } + if (!blockbits) { + pr_err("master bit set in root but no blocks: %d", master); + return 0; + } + + for (i = 0; i < 8; i++) + if (blockbits & (1 << i)) { + block_number = master * 8 + i; /* block # */ + ret |= pm8xxx_irq_block_handler(chip, block_number); + } + return ret; +} + +static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct pm_irq_chip *chip = irq_desc_get_handler_data(desc); + struct irq_chip *irq_chip = irq_desc_get_chip(desc); + unsigned int root; + int i, ret, masters = 0; + + chained_irq_enter(irq_chip, desc); + + ret = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_ROOT, &root); + if (ret) { + pr_err("Can't read root status ret=%d\n", ret); + return; + } + + /* on pm8xxx series masters start from bit 1 of the root */ + masters = root >> 1; + + /* Read allowed masters for blocks. */ + for (i = 0; i < chip->num_masters; i++) + if (masters & (1 << i)) + pm8xxx_irq_master_handler(chip, i); + + chained_irq_exit(irq_chip, desc); +} + +static void pm8xxx_irq_mask_ack(struct irq_data *d) +{ + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); + unsigned int pmirq = irqd_to_hwirq(d); + int irq_bit; + u8 block, config; + + block = pmirq / 8; + irq_bit = pmirq % 8; + + config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR; + pm8xxx_config_irq(chip, block, config); +} + +static void pm8xxx_irq_unmask(struct irq_data *d) +{ + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); + unsigned int pmirq = irqd_to_hwirq(d); + int irq_bit; + u8 block, config; + + block = pmirq / 8; + irq_bit = pmirq % 8; + + config = chip->config[pmirq]; + pm8xxx_config_irq(chip, block, config); +} + +static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); + unsigned int pmirq = irqd_to_hwirq(d); + int irq_bit; + u8 block, config; + + block = pmirq / 8; + irq_bit = pmirq % 8; + + chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT) + | PM_IRQF_MASK_ALL; + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + if (flow_type & IRQF_TRIGGER_RISING) + chip->config[pmirq] &= ~PM_IRQF_MASK_RE; + if (flow_type & IRQF_TRIGGER_FALLING) + chip->config[pmirq] &= ~PM_IRQF_MASK_FE; + } else { + chip->config[pmirq] |= PM_IRQF_LVL_SEL; + + if (flow_type & IRQF_TRIGGER_HIGH) + chip->config[pmirq] &= ~PM_IRQF_MASK_RE; + else + chip->config[pmirq] &= ~PM_IRQF_MASK_FE; + } + + config = chip->config[pmirq] | PM_IRQF_CLR; + return pm8xxx_config_irq(chip, block, config); +} + +static struct irq_chip pm8xxx_irq_chip = { + .name = "pm8xxx", + .irq_mask_ack = pm8xxx_irq_mask_ack, + .irq_unmask = pm8xxx_irq_unmask, + .irq_set_type = pm8xxx_irq_set_type, + .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, +}; + +/** + * pm8xxx_get_irq_stat - get the status of the irq line + * @chip: pointer to identify a pmic irq controller + * @irq: the irq number + * + * The pm8xxx gpio and mpp rely on the interrupt block to read + * the values on their pins. This function is to facilitate reading + * the status of a gpio or an mpp line. The caller has to convert the + * gpio number to irq number. + * + * RETURNS: + * an int indicating the value read on that line + */ +static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) +{ + int pmirq, rc; + unsigned int block, bits, bit; + unsigned long flags; + struct irq_data *irq_data = irq_get_irq_data(irq); + + pmirq = irq_data->hwirq; + + block = pmirq / 8; + bit = pmirq % 8; + + spin_lock_irqsave(&chip->pm_irq_lock, flags); + + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block); + if (rc) { + pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n", + irq, pmirq, block, rc); + goto bail_out; + } + + rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits); + if (rc) { + pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n", + irq, pmirq, block, rc); + goto bail_out; + } + + rc = (bits & (1 << bit)) ? 1 : 0; + +bail_out: + spin_unlock_irqrestore(&chip->pm_irq_lock, flags); + + return rc; +} + +static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct pm_irq_chip *chip = d->host_data; + + irq_set_chip_and_handler(irq, &pm8xxx_irq_chip, handle_level_irq); + irq_set_chip_data(irq, chip); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + irq_set_noprobe(irq); +#endif + return 0; +} + +static const struct irq_domain_ops pm8xxx_irq_domain_ops = { + .xlate = irq_domain_xlate_twocell, + .map = pm8xxx_irq_domain_map, +}; + static int pm8921_readb(const struct device *dev, u16 addr, u8 *val) { const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev); @@ -81,42 +374,35 @@ static struct pm8xxx_drvdata pm8921_drvdata = { .pmic_read_irq_stat = pm8921_read_irq_stat, }; -static int pm8921_add_subdevices(const struct pm8921_platform_data - *pdata, - struct pm8921 *pmic, - u32 rev) -{ - int ret = 0, irq_base = 0; - struct pm_irq_chip *irq_chip; - - if (pdata->irq_pdata) { - pdata->irq_pdata->irq_cdata.nirqs = PM8921_NR_IRQS; - pdata->irq_pdata->irq_cdata.rev = rev; - irq_base = pdata->irq_pdata->irq_base; - irq_chip = pm8xxx_irq_init(pmic->dev, pdata->irq_pdata); +static const struct regmap_config ssbi_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .max_register = 0x3ff, + .fast_io = true, + .reg_read = ssbi_reg_read, + .reg_write = ssbi_reg_write +}; - if (IS_ERR(irq_chip)) { - pr_err("Failed to init interrupts ret=%ld\n", - PTR_ERR(irq_chip)); - return PTR_ERR(irq_chip); - } - pmic->irq_chip = irq_chip; - } - return ret; -} +static const struct of_device_id pm8921_id_table[] = { + { .compatible = "qcom,pm8058", }, + { .compatible = "qcom,pm8921", }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8921_id_table); static int pm8921_probe(struct platform_device *pdev) { - const struct pm8921_platform_data *pdata = dev_get_platdata(&pdev->dev); struct pm8921 *pmic; - int rc; - u8 val; + struct regmap *regmap; + int irq, rc; + unsigned int val; u32 rev; + struct pm_irq_chip *chip; + unsigned int nirqs = PM8921_NR_IRQS; - if (!pdata) { - pr_err("missing platform data\n"); - return -EINVAL; - } + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL); if (!pmic) { @@ -124,8 +410,13 @@ static int pm8921_probe(struct platform_device *pdev) return -ENOMEM; } + regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent, + &ssbi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + /* Read PMIC chip revision */ - rc = ssbi_read(pdev->dev.parent, REG_HWREV, &val, sizeof(val)); + rc = regmap_read(regmap, REG_HWREV, &val); if (rc) { pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc); return rc; @@ -134,7 +425,7 @@ static int pm8921_probe(struct platform_device *pdev) rev = val; /* Read PMIC chip revision 2 */ - rc = ssbi_read(pdev->dev.parent, REG_HWREV_2, &val, sizeof(val)); + rc = regmap_read(regmap, REG_HWREV_2, &val); if (rc) { pr_err("Failed to read hw rev 2 reg %d:rc=%d\n", REG_HWREV_2, rc); @@ -147,37 +438,56 @@ static int pm8921_probe(struct platform_device *pdev) pm8921_drvdata.pm_chip_data = pmic; platform_set_drvdata(pdev, &pm8921_drvdata); - rc = pm8921_add_subdevices(pdata, pmic, rev); + chip = devm_kzalloc(&pdev->dev, sizeof(*chip) + + sizeof(chip->config[0]) * nirqs, + GFP_KERNEL); + if (!chip) + return -ENOMEM; + + pmic->irq_chip = chip; + chip->dev = &pdev->dev; + chip->regmap = regmap; + chip->num_irqs = nirqs; + chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8); + chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8); + spin_lock_init(&chip->pm_irq_lock); + + chip->irqdomain = irq_domain_add_linear(pdev->dev.of_node, nirqs, + &pm8xxx_irq_domain_ops, + chip); + if (!chip->irqdomain) + return -ENODEV; + + irq_set_handler_data(irq, chip); + irq_set_chained_handler(irq, pm8xxx_irq_handler); + irq_set_irq_wake(irq, 1); + + rc = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); if (rc) { - pr_err("Cannot add subdevices rc=%d\n", rc); - goto err; + irq_set_chained_handler(irq, NULL); + irq_set_handler_data(irq, NULL); + irq_domain_remove(chip->irqdomain); } - /* gpio might not work if no irq device is found */ - WARN_ON(pmic->irq_chip == NULL); + return rc; +} +static int pm8921_remove_child(struct device *dev, void *unused) +{ + platform_device_unregister(to_platform_device(dev)); return 0; - -err: - mfd_remove_devices(pmic->dev); - return rc; } static int pm8921_remove(struct platform_device *pdev) { - struct pm8xxx_drvdata *drvdata; - struct pm8921 *pmic = NULL; - - drvdata = platform_get_drvdata(pdev); - if (drvdata) - pmic = drvdata->pm_chip_data; - if (pmic) { - mfd_remove_devices(pmic->dev); - if (pmic->irq_chip) { - pm8xxx_irq_exit(pmic->irq_chip); - pmic->irq_chip = NULL; - } - } + int irq = platform_get_irq(pdev, 0); + struct pm8921 *pmic = pm8921_drvdata.pm_chip_data; + struct pm_irq_chip *chip = pmic->irq_chip; + + device_for_each_child(&pdev->dev, NULL, pm8921_remove_child); + irq_set_chained_handler(irq, NULL); + irq_set_handler_data(irq, NULL); + irq_domain_remove(chip->irqdomain); return 0; } @@ -188,6 +498,7 @@ static struct platform_driver pm8921_driver = { .driver = { .name = "pm8921-core", .owner = THIS_MODULE, + .of_match_table = pm8921_id_table, }, }; diff --git a/drivers/mfd/pm8xxx-irq.c b/drivers/mfd/pm8xxx-irq.c deleted file mode 100644 index 1360e20adf11..000000000000 --- a/drivers/mfd/pm8xxx-irq.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/mfd/pm8xxx/core.h> -#include <linux/mfd/pm8xxx/irq.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -/* PMIC8xxx IRQ */ - -#define SSBI_REG_ADDR_IRQ_BASE 0x1BB - -#define SSBI_REG_ADDR_IRQ_ROOT (SSBI_REG_ADDR_IRQ_BASE + 0) -#define SSBI_REG_ADDR_IRQ_M_STATUS1 (SSBI_REG_ADDR_IRQ_BASE + 1) -#define SSBI_REG_ADDR_IRQ_M_STATUS2 (SSBI_REG_ADDR_IRQ_BASE + 2) -#define SSBI_REG_ADDR_IRQ_M_STATUS3 (SSBI_REG_ADDR_IRQ_BASE + 3) -#define SSBI_REG_ADDR_IRQ_M_STATUS4 (SSBI_REG_ADDR_IRQ_BASE + 4) -#define SSBI_REG_ADDR_IRQ_BLK_SEL (SSBI_REG_ADDR_IRQ_BASE + 5) -#define SSBI_REG_ADDR_IRQ_IT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 6) -#define SSBI_REG_ADDR_IRQ_CONFIG (SSBI_REG_ADDR_IRQ_BASE + 7) -#define SSBI_REG_ADDR_IRQ_RT_STATUS (SSBI_REG_ADDR_IRQ_BASE + 8) - -#define PM_IRQF_LVL_SEL 0x01 /* level select */ -#define PM_IRQF_MASK_FE 0x02 /* mask falling edge */ -#define PM_IRQF_MASK_RE 0x04 /* mask rising edge */ -#define PM_IRQF_CLR 0x08 /* clear interrupt */ -#define PM_IRQF_BITS_MASK 0x70 -#define PM_IRQF_BITS_SHIFT 4 -#define PM_IRQF_WRITE 0x80 - -#define PM_IRQF_MASK_ALL (PM_IRQF_MASK_FE | \ - PM_IRQF_MASK_RE) - -struct pm_irq_chip { - struct device *dev; - spinlock_t pm_irq_lock; - unsigned int devirq; - unsigned int irq_base; - unsigned int num_irqs; - unsigned int num_blocks; - unsigned int num_masters; - u8 config[0]; -}; - -static int pm8xxx_read_root_irq(const struct pm_irq_chip *chip, u8 *rp) -{ - return pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_ROOT, rp); -} - -static int pm8xxx_read_master_irq(const struct pm_irq_chip *chip, u8 m, u8 *bp) -{ - return pm8xxx_readb(chip->dev, - SSBI_REG_ADDR_IRQ_M_STATUS1 + m, bp); -} - -static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, u8 bp, u8 *ip) -{ - int rc; - - spin_lock(&chip->pm_irq_lock); - rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp); - if (rc) { - pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); - goto bail; - } - - rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_IT_STATUS, ip); - if (rc) - pr_err("Failed Reading Status rc=%d\n", rc); -bail: - spin_unlock(&chip->pm_irq_lock); - return rc; -} - -static int pm8xxx_config_irq(struct pm_irq_chip *chip, u8 bp, u8 cp) -{ - int rc; - - spin_lock(&chip->pm_irq_lock); - rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, bp); - if (rc) { - pr_err("Failed Selecting Block %d rc=%d\n", bp, rc); - goto bail; - } - - cp |= PM_IRQF_WRITE; - rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_CONFIG, cp); - if (rc) - pr_err("Failed Configuring IRQ rc=%d\n", rc); -bail: - spin_unlock(&chip->pm_irq_lock); - return rc; -} - -static int pm8xxx_irq_block_handler(struct pm_irq_chip *chip, int block) -{ - int pmirq, irq, i, ret = 0; - u8 bits; - - ret = pm8xxx_read_block_irq(chip, block, &bits); - if (ret) { - pr_err("Failed reading %d block ret=%d", block, ret); - return ret; - } - if (!bits) { - pr_err("block bit set in master but no irqs: %d", block); - return 0; - } - - /* Check IRQ bits */ - for (i = 0; i < 8; i++) { - if (bits & (1 << i)) { - pmirq = block * 8 + i; - irq = pmirq + chip->irq_base; - generic_handle_irq(irq); - } - } - return 0; -} - -static int pm8xxx_irq_master_handler(struct pm_irq_chip *chip, int master) -{ - u8 blockbits; - int block_number, i, ret = 0; - - ret = pm8xxx_read_master_irq(chip, master, &blockbits); - if (ret) { - pr_err("Failed to read master %d ret=%d\n", master, ret); - return ret; - } - if (!blockbits) { - pr_err("master bit set in root but no blocks: %d", master); - return 0; - } - - for (i = 0; i < 8; i++) - if (blockbits & (1 << i)) { - block_number = master * 8 + i; /* block # */ - ret |= pm8xxx_irq_block_handler(chip, block_number); - } - return ret; -} - -static void pm8xxx_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct pm_irq_chip *chip = irq_desc_get_handler_data(desc); - struct irq_chip *irq_chip = irq_desc_get_chip(desc); - u8 root; - int i, ret, masters = 0; - - ret = pm8xxx_read_root_irq(chip, &root); - if (ret) { - pr_err("Can't read root status ret=%d\n", ret); - return; - } - - /* on pm8xxx series masters start from bit 1 of the root */ - masters = root >> 1; - - /* Read allowed masters for blocks. */ - for (i = 0; i < chip->num_masters; i++) - if (masters & (1 << i)) - pm8xxx_irq_master_handler(chip, i); - - irq_chip->irq_ack(&desc->irq_data); -} - -static void pm8xxx_irq_mask_ack(struct irq_data *d) -{ - struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); - unsigned int pmirq = d->irq - chip->irq_base; - int master, irq_bit; - u8 block, config; - - block = pmirq / 8; - master = block / 8; - irq_bit = pmirq % 8; - - config = chip->config[pmirq] | PM_IRQF_MASK_ALL | PM_IRQF_CLR; - pm8xxx_config_irq(chip, block, config); -} - -static void pm8xxx_irq_unmask(struct irq_data *d) -{ - struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); - unsigned int pmirq = d->irq - chip->irq_base; - int master, irq_bit; - u8 block, config; - - block = pmirq / 8; - master = block / 8; - irq_bit = pmirq % 8; - - config = chip->config[pmirq]; - pm8xxx_config_irq(chip, block, config); -} - -static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); - unsigned int pmirq = d->irq - chip->irq_base; - int master, irq_bit; - u8 block, config; - - block = pmirq / 8; - master = block / 8; - irq_bit = pmirq % 8; - - chip->config[pmirq] = (irq_bit << PM_IRQF_BITS_SHIFT) - | PM_IRQF_MASK_ALL; - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - if (flow_type & IRQF_TRIGGER_RISING) - chip->config[pmirq] &= ~PM_IRQF_MASK_RE; - if (flow_type & IRQF_TRIGGER_FALLING) - chip->config[pmirq] &= ~PM_IRQF_MASK_FE; - } else { - chip->config[pmirq] |= PM_IRQF_LVL_SEL; - - if (flow_type & IRQF_TRIGGER_HIGH) - chip->config[pmirq] &= ~PM_IRQF_MASK_RE; - else - chip->config[pmirq] &= ~PM_IRQF_MASK_FE; - } - - config = chip->config[pmirq] | PM_IRQF_CLR; - return pm8xxx_config_irq(chip, block, config); -} - -static int pm8xxx_irq_set_wake(struct irq_data *d, unsigned int on) -{ - return 0; -} - -static struct irq_chip pm8xxx_irq_chip = { - .name = "pm8xxx", - .irq_mask_ack = pm8xxx_irq_mask_ack, - .irq_unmask = pm8xxx_irq_unmask, - .irq_set_type = pm8xxx_irq_set_type, - .irq_set_wake = pm8xxx_irq_set_wake, - .flags = IRQCHIP_MASK_ON_SUSPEND, -}; - -/** - * pm8xxx_get_irq_stat - get the status of the irq line - * @chip: pointer to identify a pmic irq controller - * @irq: the irq number - * - * The pm8xxx gpio and mpp rely on the interrupt block to read - * the values on their pins. This function is to facilitate reading - * the status of a gpio or an mpp line. The caller has to convert the - * gpio number to irq number. - * - * RETURNS: - * an int indicating the value read on that line - */ -int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) -{ - int pmirq, rc; - u8 block, bits, bit; - unsigned long flags; - - if (chip == NULL || irq < chip->irq_base || - irq >= chip->irq_base + chip->num_irqs) - return -EINVAL; - - pmirq = irq - chip->irq_base; - - block = pmirq / 8; - bit = pmirq % 8; - - spin_lock_irqsave(&chip->pm_irq_lock, flags); - - rc = pm8xxx_writeb(chip->dev, SSBI_REG_ADDR_IRQ_BLK_SEL, block); - if (rc) { - pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n", - irq, pmirq, block, rc); - goto bail_out; - } - - rc = pm8xxx_readb(chip->dev, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits); - if (rc) { - pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n", - irq, pmirq, block, rc); - goto bail_out; - } - - rc = (bits & (1 << bit)) ? 1 : 0; - -bail_out: - spin_unlock_irqrestore(&chip->pm_irq_lock, flags); - - return rc; -} -EXPORT_SYMBOL_GPL(pm8xxx_get_irq_stat); - -struct pm_irq_chip * pm8xxx_irq_init(struct device *dev, - const struct pm8xxx_irq_platform_data *pdata) -{ - struct pm_irq_chip *chip; - int devirq, rc; - unsigned int pmirq; - - if (!pdata) { - pr_err("No platform data\n"); - return ERR_PTR(-EINVAL); - } - - devirq = pdata->devirq; - if (devirq < 0) { - pr_err("missing devirq\n"); - rc = devirq; - return ERR_PTR(-EINVAL); - } - - chip = kzalloc(sizeof(struct pm_irq_chip) - + sizeof(u8) * pdata->irq_cdata.nirqs, GFP_KERNEL); - if (!chip) { - pr_err("Cannot alloc pm_irq_chip struct\n"); - return ERR_PTR(-EINVAL); - } - - chip->dev = dev; - chip->devirq = devirq; - chip->irq_base = pdata->irq_base; - chip->num_irqs = pdata->irq_cdata.nirqs; - chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8); - chip->num_masters = DIV_ROUND_UP(chip->num_blocks, 8); - spin_lock_init(&chip->pm_irq_lock); - - for (pmirq = 0; pmirq < chip->num_irqs; pmirq++) { - irq_set_chip_and_handler(chip->irq_base + pmirq, - &pm8xxx_irq_chip, - handle_level_irq); - irq_set_chip_data(chip->irq_base + pmirq, chip); -#ifdef CONFIG_ARM - set_irq_flags(chip->irq_base + pmirq, IRQF_VALID); -#else - irq_set_noprobe(chip->irq_base + pmirq); -#endif - } - - irq_set_irq_type(devirq, pdata->irq_trigger_flag); - irq_set_handler_data(devirq, chip); - irq_set_chained_handler(devirq, pm8xxx_irq_handler); - set_irq_wake(devirq, 1); - - return chip; -} - -int pm8xxx_irq_exit(struct pm_irq_chip *chip) -{ - irq_set_chained_handler(chip->devirq, NULL); - kfree(chip); - return 0; -} diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c index b41db5968706..bb8502020274 100644 --- a/drivers/mfd/rc5t583-irq.c +++ b/drivers/mfd/rc5t583-irq.c @@ -22,7 +22,6 @@ */ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/init.h> #include <linux/i2c.h> #include <linux/mfd/rc5t583.h> diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index d346146249a2..c79569750be9 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -19,7 +19,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ -#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c index c8f345f7e9a2..663f8a37aa6b 100644 --- a/drivers/mfd/retu-mfd.c +++ b/drivers/mfd/retu-mfd.c @@ -19,7 +19,6 @@ #include <linux/err.h> #include <linux/i2c.h> #include <linux/irq.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/mutex.h> #include <linux/module.h> diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c new file mode 100644 index 000000000000..b53b9d46cc45 --- /dev/null +++ b/drivers/mfd/rtsx_usb.c @@ -0,0 +1,760 @@ +/* Driver for Realtek USB card reader + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Roger Tseng <rogerable@realtek.com> + */ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/usb.h> +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rtsx_usb.h> + +static int polling_pipe = 1; +module_param(polling_pipe, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)"); + +static struct mfd_cell rtsx_usb_cells[] = { + [RTSX_USB_SD_CARD] = { + .name = "rtsx_usb_sdmmc", + .pdata_size = 0, + }, + [RTSX_USB_MS_CARD] = { + .name = "rtsx_usb_ms", + .pdata_size = 0, + }, +}; + +static void rtsx_usb_sg_timed_out(unsigned long data) +{ + struct rtsx_ucr *ucr = (struct rtsx_ucr *)data; + + dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__); + usb_sg_cancel(&ucr->current_sg); + + /* we know the cancellation is caused by time-out */ + ucr->current_sg.status = -ETIMEDOUT; +} + +static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr, + unsigned int pipe, struct scatterlist *sg, int num_sg, + unsigned int length, unsigned int *act_len, int timeout) +{ + int ret; + + dev_dbg(&ucr->pusb_intf->dev, "%s: xfer %u bytes, %d entries\n", + __func__, length, num_sg); + ret = usb_sg_init(&ucr->current_sg, ucr->pusb_dev, pipe, 0, + sg, num_sg, length, GFP_NOIO); + if (ret) + return ret; + + ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout); + add_timer(&ucr->sg_timer); + usb_sg_wait(&ucr->current_sg); + del_timer(&ucr->sg_timer); + + if (act_len) + *act_len = ucr->current_sg.bytes; + + return ucr->current_sg.status; +} + +int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe, + void *buf, unsigned int len, int num_sg, + unsigned int *act_len, int timeout) +{ + if (timeout < 600) + timeout = 600; + + if (num_sg) + return rtsx_usb_bulk_transfer_sglist(ucr, pipe, + (struct scatterlist *)buf, num_sg, len, act_len, + timeout); + else + return usb_bulk_msg(ucr->pusb_dev, pipe, buf, len, act_len, + timeout); +} +EXPORT_SYMBOL_GPL(rtsx_usb_transfer_data); + +static inline void rtsx_usb_seq_cmd_hdr(struct rtsx_ucr *ucr, + u16 addr, u16 len, u8 seq_type) +{ + rtsx_usb_cmd_hdr_tag(ucr); + + ucr->cmd_buf[PACKET_TYPE] = seq_type; + ucr->cmd_buf[5] = (u8)(len >> 8); + ucr->cmd_buf[6] = (u8)len; + ucr->cmd_buf[8] = (u8)(addr >> 8); + ucr->cmd_buf[9] = (u8)addr; + + if (seq_type == SEQ_WRITE) + ucr->cmd_buf[STAGE_FLAG] = 0; + else + ucr->cmd_buf[STAGE_FLAG] = STAGE_R; +} + +static int rtsx_usb_seq_write_register(struct rtsx_ucr *ucr, + u16 addr, u16 len, u8 *data) +{ + u16 cmd_len = ALIGN(SEQ_WRITE_DATA_OFFSET + len, 4); + + if (!data) + return -EINVAL; + + if (cmd_len > IOBUF_SIZE) + return -EINVAL; + + rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_WRITE); + memcpy(ucr->cmd_buf + SEQ_WRITE_DATA_OFFSET, data, len); + + return rtsx_usb_transfer_data(ucr, + usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT), + ucr->cmd_buf, cmd_len, 0, NULL, 100); +} + +static int rtsx_usb_seq_read_register(struct rtsx_ucr *ucr, + u16 addr, u16 len, u8 *data) +{ + int i, ret; + u16 rsp_len = round_down(len, 4); + u16 res_len = len - rsp_len; + + if (!data) + return -EINVAL; + + /* 4-byte aligned part */ + if (rsp_len) { + rtsx_usb_seq_cmd_hdr(ucr, addr, len, SEQ_READ); + ret = rtsx_usb_transfer_data(ucr, + usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT), + ucr->cmd_buf, 12, 0, NULL, 100); + if (ret) + return ret; + + ret = rtsx_usb_transfer_data(ucr, + usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN), + data, rsp_len, 0, NULL, 100); + if (ret) + return ret; + } + + /* unaligned part */ + for (i = 0; i < res_len; i++) { + ret = rtsx_usb_read_register(ucr, addr + rsp_len + i, + data + rsp_len + i); + if (ret) + return ret; + } + + return 0; +} + +int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len) +{ + return rtsx_usb_seq_read_register(ucr, PPBUF_BASE2, (u16)buf_len, buf); +} +EXPORT_SYMBOL_GPL(rtsx_usb_read_ppbuf); + +int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len) +{ + return rtsx_usb_seq_write_register(ucr, PPBUF_BASE2, (u16)buf_len, buf); +} +EXPORT_SYMBOL_GPL(rtsx_usb_write_ppbuf); + +int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr, + u8 mask, u8 data) +{ + u16 value, index; + + addr |= EP0_WRITE_REG_CMD << EP0_OP_SHIFT; + value = swab16(addr); + index = mask | data << 8; + + return usb_control_msg(ucr->pusb_dev, + usb_sndctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, NULL, 0, 100); +} +EXPORT_SYMBOL_GPL(rtsx_usb_ep0_write_register); + +int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data) +{ + u16 value; + + if (!data) + return -EINVAL; + *data = 0; + + addr |= EP0_READ_REG_CMD << EP0_OP_SHIFT; + value = swab16(addr); + + return usb_control_msg(ucr->pusb_dev, + usb_rcvctrlpipe(ucr->pusb_dev, 0), RTSX_USB_REQ_REG_OP, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, 1, 100); +} +EXPORT_SYMBOL_GPL(rtsx_usb_ep0_read_register); + +void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, u16 reg_addr, + u8 mask, u8 data) +{ + int i; + + if (ucr->cmd_idx < (IOBUF_SIZE - CMD_OFFSET) / 4) { + i = CMD_OFFSET + ucr->cmd_idx * 4; + + ucr->cmd_buf[i++] = ((cmd_type & 0x03) << 6) | + (u8)((reg_addr >> 8) & 0x3F); + ucr->cmd_buf[i++] = (u8)reg_addr; + ucr->cmd_buf[i++] = mask; + ucr->cmd_buf[i++] = data; + + ucr->cmd_idx++; + } +} +EXPORT_SYMBOL_GPL(rtsx_usb_add_cmd); + +int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout) +{ + int ret; + + ucr->cmd_buf[CNT_H] = (u8)(ucr->cmd_idx >> 8); + ucr->cmd_buf[CNT_L] = (u8)(ucr->cmd_idx); + ucr->cmd_buf[STAGE_FLAG] = flag; + + ret = rtsx_usb_transfer_data(ucr, + usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT), + ucr->cmd_buf, ucr->cmd_idx * 4 + CMD_OFFSET, + 0, NULL, timeout); + if (ret) { + rtsx_usb_clear_fsm_err(ucr); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_usb_send_cmd); + +int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout) +{ + if (rsp_len <= 0) + return -EINVAL; + + rsp_len = ALIGN(rsp_len, 4); + + return rtsx_usb_transfer_data(ucr, + usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN), + ucr->rsp_buf, rsp_len, 0, NULL, timeout); +} +EXPORT_SYMBOL_GPL(rtsx_usb_get_rsp); + +static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status) +{ + int ret; + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_EXIST, 0x00, 0x00); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, OCPSTAT, 0x00, 0x00); + ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (ret) + return ret; + + ret = rtsx_usb_get_rsp(ucr, 2, 100); + if (ret) + return ret; + + *status = ((ucr->rsp_buf[0] >> 2) & 0x0f) | + ((ucr->rsp_buf[1] & 0x03) << 4); + + return 0; +} + +int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status) +{ + int ret; + + if (!status) + return -EINVAL; + + if (polling_pipe == 0) + ret = usb_control_msg(ucr->pusb_dev, + usb_rcvctrlpipe(ucr->pusb_dev, 0), + RTSX_USB_REQ_POLL, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, status, 2, 100); + else + ret = rtsx_usb_get_status_with_bulk(ucr, status); + + /* usb_control_msg may return positive when success */ + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_usb_get_card_status); + +static int rtsx_usb_write_phy_register(struct rtsx_ucr *ucr, u8 addr, u8 val) +{ + dev_dbg(&ucr->pusb_intf->dev, "Write 0x%x to phy register 0x%x\n", + val, addr); + + rtsx_usb_init_cmd(ucr); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VSTAIN, 0xFF, val); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL, 0xFF, addr & 0x0F); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VCONTROL, + 0xFF, (addr >> 4) & 0x0F); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x00); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, HS_VLOADM, 0xFF, 0x01); + + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} + +int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, u8 data) +{ + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, addr, mask, data); + return rtsx_usb_send_cmd(ucr, MODE_C, 100); +} +EXPORT_SYMBOL_GPL(rtsx_usb_write_register); + +int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data) +{ + int ret; + + if (data != NULL) + *data = 0; + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, READ_REG_CMD, addr, 0, 0); + ret = rtsx_usb_send_cmd(ucr, MODE_CR, 100); + if (ret) + return ret; + + ret = rtsx_usb_get_rsp(ucr, 1, 100); + if (ret) + return ret; + + if (data != NULL) + *data = ucr->rsp_buf[0]; + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_usb_read_register); + +static inline u8 double_ssc_depth(u8 depth) +{ + return (depth > 1) ? (depth - 1) : depth; +} + +static u8 revise_ssc_depth(u8 ssc_depth, u8 div) +{ + if (div > CLK_DIV_1) { + if (ssc_depth > div - 1) + ssc_depth -= (div - 1); + else + ssc_depth = SSC_DEPTH_2M; + } + + return ssc_depth; +} + +int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk) +{ + int ret; + u8 n, clk_divider, mcu_cnt, div; + + if (!card_clock) { + ucr->cur_clk = 0; + return 0; + } + + if (initial_mode) { + /* We use 250k(around) here, in initial stage */ + clk_divider = SD_CLK_DIVIDE_128; + card_clock = 30000000; + } else { + clk_divider = SD_CLK_DIVIDE_0; + } + + ret = rtsx_usb_write_register(ucr, SD_CFG1, + SD_CLK_DIVIDE_MASK, clk_divider); + if (ret < 0) + return ret; + + card_clock /= 1000000; + dev_dbg(&ucr->pusb_intf->dev, + "Switch card clock to %dMHz\n", card_clock); + + if (!initial_mode && double_clk) + card_clock *= 2; + dev_dbg(&ucr->pusb_intf->dev, + "Internal SSC clock: %dMHz (cur_clk = %d)\n", + card_clock, ucr->cur_clk); + + if (card_clock == ucr->cur_clk) + return 0; + + /* Converting clock value into internal settings: n and div */ + n = card_clock - 2; + if ((card_clock <= 2) || (n > MAX_DIV_N)) + return -EINVAL; + + mcu_cnt = 60/card_clock + 3; + if (mcu_cnt > 15) + mcu_cnt = 15; + + /* Make sure that the SSC clock div_n is not less than MIN_DIV_N */ + + div = CLK_DIV_1; + while (n < MIN_DIV_N && div < CLK_DIV_4) { + n = (n + 2) * 2 - 2; + div++; + } + dev_dbg(&ucr->pusb_intf->dev, "n = %d, div = %d\n", n, div); + + if (double_clk) + ssc_depth = double_ssc_depth(ssc_depth); + + ssc_depth = revise_ssc_depth(ssc_depth, div); + dev_dbg(&ucr->pusb_intf->dev, "ssc_depth = %d\n", ssc_depth); + + rtsx_usb_init_cmd(ucr); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, + 0x3F, (div << 4) | mcu_cnt); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL2, + SSC_DEPTH_MASK, ssc_depth); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB); + if (vpclk) { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + PHASE_NOT_RESET, 0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, + PHASE_NOT_RESET, PHASE_NOT_RESET); + } + + ret = rtsx_usb_send_cmd(ucr, MODE_C, 2000); + if (ret < 0) + return ret; + + ret = rtsx_usb_write_register(ucr, SSC_CTL1, 0xff, + SSC_RSTB | SSC_8X_EN | SSC_SEL_4M); + if (ret < 0) + return ret; + + /* Wait SSC clock stable */ + usleep_range(100, 1000); + + ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0); + if (ret < 0) + return ret; + + ucr->cur_clk = card_clock; + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_usb_switch_clock); + +int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card) +{ + int ret; + u16 val; + u16 cd_mask[] = { + [RTSX_USB_SD_CARD] = (CD_MASK & ~SD_CD), + [RTSX_USB_MS_CARD] = (CD_MASK & ~MS_CD) + }; + + ret = rtsx_usb_get_card_status(ucr, &val); + /* + * If get status fails, return 0 (ok) for the exclusive check + * and let the flow fail at somewhere else. + */ + if (ret) + return 0; + + if (val & cd_mask[card]) + return -EIO; + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_usb_card_exclusive_check); + +static int rtsx_usb_reset_chip(struct rtsx_ucr *ucr) +{ + int ret; + u8 val; + + rtsx_usb_init_cmd(ucr); + + if (CHECK_PKG(ucr, LQFP48)) { + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + LDO3318_PWR_MASK, LDO_SUSPEND); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL, + FORCE_LDO_POWERB, FORCE_LDO_POWERB); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, + 0x30, 0x10); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, + 0x03, 0x01); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, + 0x0C, 0x04); + } + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SYS_DUMMY0, NYET_MSAK, NYET_EN); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CD_DEGLITCH_WIDTH, 0xFF, 0x08); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CD_DEGLITCH_EN, XD_CD_DEGLITCH_EN, 0x0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD30_DRIVE_SEL, + SD30_DRIVE_MASK, DRIVER_TYPE_D); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_DRIVE_SEL, SD20_DRIVE_MASK, 0x0); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG, 0xE0, 0x0); + + if (ucr->is_rts5179) + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, + CARD_PULL_CTL5, 0x03, 0x01); + + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DMA1_CTL, + EXTEND_DMA1_ASYNC_SIGNAL, EXTEND_DMA1_ASYNC_SIGNAL); + rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_INT_PEND, + XD_INT | MS_INT | SD_INT, + XD_INT | MS_INT | SD_INT); + + ret = rtsx_usb_send_cmd(ucr, MODE_C, 100); + if (ret) + return ret; + + /* config non-crystal mode */ + rtsx_usb_read_register(ucr, CFG_MODE, &val); + if ((val & XTAL_FREE) || ((val & CLK_MODE_MASK) == CLK_MODE_NON_XTAL)) { + ret = rtsx_usb_write_phy_register(ucr, 0xC2, 0x7C); + if (ret) + return ret; + } + + return 0; +} + +static int rtsx_usb_init_chip(struct rtsx_ucr *ucr) +{ + int ret; + u8 val; + + rtsx_usb_clear_fsm_err(ucr); + + /* power on SSC */ + ret = rtsx_usb_write_register(ucr, + FPDCTL, SSC_POWER_MASK, SSC_POWER_ON); + if (ret) + return ret; + + usleep_range(100, 1000); + ret = rtsx_usb_write_register(ucr, CLK_DIV, CLK_CHANGE, 0x00); + if (ret) + return ret; + + /* determine IC version */ + ret = rtsx_usb_read_register(ucr, HW_VERSION, &val); + if (ret) + return ret; + + ucr->ic_version = val & HW_VER_MASK; + + /* determine package */ + ret = rtsx_usb_read_register(ucr, CARD_SHARE_MODE, &val); + if (ret) + return ret; + + if (val & CARD_SHARE_LQFP_SEL) { + ucr->package = LQFP48; + dev_dbg(&ucr->pusb_intf->dev, "Package: LQFP48\n"); + } else { + ucr->package = QFN24; + dev_dbg(&ucr->pusb_intf->dev, "Package: QFN24\n"); + } + + /* determine IC variations */ + rtsx_usb_read_register(ucr, CFG_MODE_1, &val); + if (val & RTS5179) { + ucr->is_rts5179 = true; + dev_dbg(&ucr->pusb_intf->dev, "Device is rts5179\n"); + } else { + ucr->is_rts5179 = false; + } + + return rtsx_usb_reset_chip(ucr); +} + +static int rtsx_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct rtsx_ucr *ucr; + int ret; + + dev_dbg(&intf->dev, + ": Realtek USB Card Reader found at bus %03d address %03d\n", + usb_dev->bus->busnum, usb_dev->devnum); + + ucr = devm_kzalloc(&intf->dev, sizeof(*ucr), GFP_KERNEL); + if (!ucr) + return -ENOMEM; + + ucr->pusb_dev = usb_dev; + + ucr->iobuf = usb_alloc_coherent(ucr->pusb_dev, IOBUF_SIZE, + GFP_KERNEL, &ucr->iobuf_dma); + if (!ucr->iobuf) + return -ENOMEM; + + usb_set_intfdata(intf, ucr); + + ucr->vendor_id = id->idVendor; + ucr->product_id = id->idProduct; + ucr->cmd_buf = ucr->rsp_buf = ucr->iobuf; + + mutex_init(&ucr->dev_mutex); + + ucr->pusb_intf = intf; + + /* initialize */ + ret = rtsx_usb_init_chip(ucr); + if (ret) + goto out_init_fail; + + ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells, + ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL); + if (ret) + goto out_init_fail; + + /* initialize USB SG transfer timer */ + init_timer(&ucr->sg_timer); + setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr); +#ifdef CONFIG_PM + intf->needs_remote_wakeup = 1; + usb_enable_autosuspend(usb_dev); +#endif + + return 0; + +out_init_fail: + usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf, + ucr->iobuf_dma); + return ret; +} + +static void rtsx_usb_disconnect(struct usb_interface *intf) +{ + struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf); + + dev_dbg(&intf->dev, "%s called\n", __func__); + + mfd_remove_devices(&intf->dev); + + usb_set_intfdata(ucr->pusb_intf, NULL); + usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf, + ucr->iobuf_dma); +} + +#ifdef CONFIG_PM +static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct rtsx_ucr *ucr = + (struct rtsx_ucr *)usb_get_intfdata(intf); + + dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n", + __func__, message.event); + + mutex_lock(&ucr->dev_mutex); + rtsx_usb_turn_off_led(ucr); + mutex_unlock(&ucr->dev_mutex); + return 0; +} + +static int rtsx_usb_resume(struct usb_interface *intf) +{ + return 0; +} + +static int rtsx_usb_reset_resume(struct usb_interface *intf) +{ + struct rtsx_ucr *ucr = + (struct rtsx_ucr *)usb_get_intfdata(intf); + + rtsx_usb_reset_chip(ucr); + return 0; +} + +#else /* CONFIG_PM */ + +#define rtsx_usb_suspend NULL +#define rtsx_usb_resume NULL +#define rtsx_usb_reset_resume NULL + +#endif /* CONFIG_PM */ + + +static int rtsx_usb_pre_reset(struct usb_interface *intf) +{ + struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf); + + mutex_lock(&ucr->dev_mutex); + return 0; +} + +static int rtsx_usb_post_reset(struct usb_interface *intf) +{ + struct rtsx_ucr *ucr = (struct rtsx_ucr *)usb_get_intfdata(intf); + + mutex_unlock(&ucr->dev_mutex); + return 0; +} + +static struct usb_device_id rtsx_usb_usb_ids[] = { + { USB_DEVICE(0x0BDA, 0x0129) }, + { USB_DEVICE(0x0BDA, 0x0139) }, + { USB_DEVICE(0x0BDA, 0x0140) }, + { } +}; + +static struct usb_driver rtsx_usb_driver = { + .name = "rtsx_usb", + .probe = rtsx_usb_probe, + .disconnect = rtsx_usb_disconnect, + .suspend = rtsx_usb_suspend, + .resume = rtsx_usb_resume, + .reset_resume = rtsx_usb_reset_resume, + .pre_reset = rtsx_usb_pre_reset, + .post_reset = rtsx_usb_post_reset, + .id_table = rtsx_usb_usb_ids, + .supports_autosuspend = 1, + .soft_unbind = 1, +}; + +module_usb_driver(rtsx_usb_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>"); +MODULE_DESCRIPTION("Realtek USB Card Reader Driver"); diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 281a82747275..1cf27521fff4 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -60,6 +60,7 @@ static const struct mfd_cell s5m8767_devs[] = { .name = "s5m-rtc", }, { .name = "s5m8767-clk", + .of_compatible = "samsung,s5m8767-clk", } }; @@ -68,6 +69,7 @@ static const struct mfd_cell s2mps11_devs[] = { .name = "s2mps11-pmic", }, { .name = "s2mps11-clk", + .of_compatible = "samsung,s2mps11-clk", } }; @@ -78,6 +80,7 @@ static const struct mfd_cell s2mps14_devs[] = { .name = "s2mps14-rtc", }, { .name = "s2mps14-clk", + .of_compatible = "samsung,s2mps14-clk", } }; @@ -295,6 +298,13 @@ static int sec_pmic_probe(struct i2c_client *i2c, switch (sec_pmic->device_type) { case S2MPA01: regmap = &s2mpa01_regmap_config; + /* + * The rtc-s5m driver does not support S2MPA01 and there + * is no mfd_cell for S2MPA01 RTC device. + * However we must pass something to devm_regmap_init_i2c() + * so use S5M-like regmap config even though it wouldn't work. + */ + regmap_rtc = &s5m_rtc_regmap_config; break; case S2MPS11X: regmap = &s2mps11_regmap_config; @@ -344,7 +354,7 @@ static int sec_pmic_probe(struct i2c_client *i2c, ret = PTR_ERR(sec_pmic->regmap_rtc); dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n", ret); - return ret; + goto err_regmap_rtc; } if (pdata && pdata->cfg_pmic_irq) @@ -385,14 +395,15 @@ static int sec_pmic_probe(struct i2c_client *i2c, } if (ret) - goto err; + goto err_mfd; device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); return ret; -err: +err_mfd: sec_irq_exit(sec_pmic); +err_regmap_rtc: i2c_unregister_device(sec_pmic->rtc); return ret; } diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c index 24ae3d8421c5..90112d4cc905 100644 --- a/drivers/mfd/smsc-ece1099.c +++ b/drivers/mfd/smsc-ece1099.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/gpio.h> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 42ccd0544513..4a91f6771fb8 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -706,7 +706,7 @@ static int stmpe1801_reset(struct stmpe *stmpe) if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET)) return 0; usleep_range(100, 200); - }; + } return -EIO; } diff --git a/drivers/mfd/stw481x.c b/drivers/mfd/stw481x.c index 1243d5c6a448..7ceb3df09e25 100644 --- a/drivers/mfd/stw481x.c +++ b/drivers/mfd/stw481x.c @@ -167,7 +167,7 @@ static struct mfd_cell stw481x_cells[] = { }, }; -const struct regmap_config stw481x_regmap_config = { +static const struct regmap_config stw481x_regmap_config = { .reg_bits = 8, .val_bits = 8, }; @@ -186,6 +186,12 @@ static int stw481x_probe(struct i2c_client *client, i2c_set_clientdata(client, stw481x); stw481x->client = client; stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config); + if (IS_ERR(stw481x->map)) { + ret = PTR_ERR(stw481x->map); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } ret = stw481x_startup(stw481x); if (ret) { diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 71841f9181bd..dbea55de4397 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -69,13 +69,6 @@ EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible); static int syscon_match_pdevname(struct device *dev, void *data) { - struct platform_device *pdev = to_platform_device(dev); - const struct platform_device_id *id = platform_get_device_id(pdev); - - if (id) - if (!strcmp(id->name, (const char *)data)) - return 1; - return !strcmp(dev_name(dev), (const char *)data); } @@ -152,7 +145,7 @@ static int syscon_probe(struct platform_device *pdev) platform_set_drvdata(pdev, syscon); - dev_info(dev, "regmap %pR registered\n", res); + dev_dbg(dev, "regmap %pR registered\n", res); return 0; } diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 2cf636c267d9..bd83accc0f6d 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -13,8 +13,10 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/mfd/core.h> #include <linux/mfd/tc3589x.h> +#include <linux/err.h> /** * enum tc3589x_version - indicates the TC3589x version @@ -160,7 +162,7 @@ static const struct mfd_cell tc3589x_dev_gpio[] = { .name = "tc3589x-gpio", .num_resources = ARRAY_SIZE(gpio_resources), .resources = &gpio_resources[0], - .of_compatible = "tc3589x-gpio", + .of_compatible = "toshiba,tc3589x-gpio", }, }; @@ -169,7 +171,7 @@ static const struct mfd_cell tc3589x_dev_keypad[] = { .name = "tc3589x-keypad", .num_resources = ARRAY_SIZE(keypad_resources), .resources = &keypad_resources[0], - .of_compatible = "tc3589x-keypad", + .of_compatible = "toshiba,tc3589x-keypad", }, }; @@ -318,45 +320,74 @@ static int tc3589x_device_init(struct tc3589x *tc3589x) return ret; } -static int tc3589x_of_probe(struct device_node *np, - struct tc3589x_platform_data *pdata) +#ifdef CONFIG_OF +static const struct of_device_id tc3589x_match[] = { + /* Legacy compatible string */ + { .compatible = "tc3589x", .data = (void *) TC3589X_UNKNOWN }, + { .compatible = "toshiba,tc35890", .data = (void *) TC3589X_TC35890 }, + { .compatible = "toshiba,tc35892", .data = (void *) TC3589X_TC35892 }, + { .compatible = "toshiba,tc35893", .data = (void *) TC3589X_TC35893 }, + { .compatible = "toshiba,tc35894", .data = (void *) TC3589X_TC35894 }, + { .compatible = "toshiba,tc35895", .data = (void *) TC3589X_TC35895 }, + { .compatible = "toshiba,tc35896", .data = (void *) TC3589X_TC35896 }, + { } +}; + +MODULE_DEVICE_TABLE(of, tc3589x_match); + +static struct tc3589x_platform_data * +tc3589x_of_probe(struct device *dev, enum tc3589x_version *version) { + struct device_node *np = dev->of_node; + struct tc3589x_platform_data *pdata; struct device_node *child; + const struct of_device_id *of_id; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + of_id = of_match_device(tc3589x_match, dev); + if (!of_id) + return ERR_PTR(-ENODEV); + *version = (enum tc3589x_version) of_id->data; for_each_child_of_node(np, child) { - if (!strcmp(child->name, "tc3589x_gpio")) { + if (of_device_is_compatible(child, "toshiba,tc3589x-gpio")) pdata->block |= TC3589x_BLOCK_GPIO; - } - if (!strcmp(child->name, "tc3589x_keypad")) { + if (of_device_is_compatible(child, "toshiba,tc3589x-keypad")) pdata->block |= TC3589x_BLOCK_KEYPAD; - } } - return 0; + return pdata; } +#else +static inline struct tc3589x_platform_data * +tc3589x_of_probe(struct device *dev, enum tc3589x_version *version) +{ + dev_err(dev, "no device tree support\n"); + return ERR_PTR(-ENODEV); +} +#endif static int tc3589x_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev); struct device_node *np = i2c->dev.of_node; + struct tc3589x_platform_data *pdata = dev_get_platdata(&i2c->dev); struct tc3589x *tc3589x; + enum tc3589x_version version; int ret; if (!pdata) { - if (np) { - pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - ret = tc3589x_of_probe(np, pdata); - if (ret) - return ret; - } - else { + pdata = tc3589x_of_probe(&i2c->dev, &version); + if (IS_ERR(pdata)) { dev_err(&i2c->dev, "No platform data or DT found\n"); - return -EINVAL; + return PTR_ERR(pdata); } + } else { + /* When not probing from device tree we have this ID */ + version = id->driver_data; } if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA @@ -375,7 +406,7 @@ static int tc3589x_probe(struct i2c_client *i2c, tc3589x->pdata = pdata; tc3589x->irq_base = pdata->irq_base; - switch (id->driver_data) { + switch (version) { case TC3589X_TC35893: case TC3589X_TC35895: case TC3589X_TC35896: @@ -471,9 +502,12 @@ static const struct i2c_device_id tc3589x_id[] = { MODULE_DEVICE_TABLE(i2c, tc3589x_id); static struct i2c_driver tc3589x_driver = { - .driver.name = "tc3589x", - .driver.owner = THIS_MODULE, - .driver.pm = &tc3589x_dev_pm_ops, + .driver = { + .name = "tc3589x", + .owner = THIS_MODULE, + .pm = &tc3589x_dev_pm_ops, + .of_match_table = of_match_ptr(tc3589x_match), + }, .probe = tc3589x_probe, .remove = tc3589x_remove, .id_table = tc3589x_id, diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c deleted file mode 100644 index a5424579679c..000000000000 --- a/drivers/mfd/ti-ssp.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs - * - * Copyright (C) 2010 Texas Instruments Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/wait.h> -#include <linux/clk.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/spinlock.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/sched.h> -#include <linux/mfd/core.h> -#include <linux/mfd/ti_ssp.h> - -/* Register Offsets */ -#define REG_REV 0x00 -#define REG_IOSEL_1 0x04 -#define REG_IOSEL_2 0x08 -#define REG_PREDIV 0x0c -#define REG_INTR_ST 0x10 -#define REG_INTR_EN 0x14 -#define REG_TEST_CTRL 0x18 - -/* Per port registers */ -#define PORT_CFG_2 0x00 -#define PORT_ADDR 0x04 -#define PORT_DATA 0x08 -#define PORT_CFG_1 0x0c -#define PORT_STATE 0x10 - -#define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT) -#define SSP_PORT_CLKRATE_MASK 0x0f - -#define SSP_SEQRAM_WR_EN BIT(4) -#define SSP_SEQRAM_RD_EN BIT(5) -#define SSP_START BIT(15) -#define SSP_BUSY BIT(10) -#define SSP_PORT_ASL BIT(7) -#define SSP_PORT_CFO1 BIT(6) - -#define SSP_PORT_SEQRAM_SIZE 32 - -static const int ssp_port_base[] = {0x040, 0x080}; -static const int ssp_port_seqram[] = {0x100, 0x180}; - -struct ti_ssp { - struct resource *res; - struct device *dev; - void __iomem *regs; - spinlock_t lock; - struct clk *clk; - int irq; - wait_queue_head_t wqh; - - /* - * Some of the iosel2 register bits always read-back as 0, we need to - * remember these values so that we don't clobber previously set - * values. - */ - u32 iosel2; -}; - -static inline struct ti_ssp *dev_to_ssp(struct device *dev) -{ - return dev_get_drvdata(dev->parent); -} - -static inline int dev_to_port(struct device *dev) -{ - return to_platform_device(dev)->id; -} - -/* Register Access Helpers, rmw() functions need to run locked */ -static inline u32 ssp_read(struct ti_ssp *ssp, int reg) -{ - return __raw_readl(ssp->regs + reg); -} - -static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val) -{ - __raw_writel(val, ssp->regs + reg); -} - -static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits) -{ - ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits); -} - -static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg) -{ - return ssp_read(ssp, ssp_port_base[port] + reg); -} - -static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg, - u32 val) -{ - ssp_write(ssp, ssp_port_base[port] + reg, val); -} - -static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg, - u32 mask, u32 bits) -{ - ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits); -} - -static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg, - u32 bits) -{ - ssp_port_rmw(ssp, port, reg, bits, 0); -} - -static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg, - u32 bits) -{ - ssp_port_rmw(ssp, port, reg, 0, bits); -} - -/* Called to setup port clock mode, caller must hold ssp->lock */ -static int __set_mode(struct ti_ssp *ssp, int port, int mode) -{ - mode &= SSP_PORT_CONFIG_MASK; - ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode); - - return 0; -} - -int ti_ssp_set_mode(struct device *dev, int mode) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev); - int ret; - - spin_lock(&ssp->lock); - ret = __set_mode(ssp, port, mode); - spin_unlock(&ssp->lock); - - return ret; -} -EXPORT_SYMBOL(ti_ssp_set_mode); - -/* Called to setup iosel2, caller must hold ssp->lock */ -static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val) -{ - ssp->iosel2 = (ssp->iosel2 & ~mask) | val; - ssp_write(ssp, REG_IOSEL_2, ssp->iosel2); -} - -/* Called to setup port iosel, caller must hold ssp->lock */ -static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel) -{ - unsigned val, shift = port ? 16 : 0; - - /* IOSEL1 gets the least significant 16 bits */ - val = ssp_read(ssp, REG_IOSEL_1); - val &= 0xffff << (port ? 0 : 16); - val |= (iosel & 0xffff) << (port ? 16 : 0); - ssp_write(ssp, REG_IOSEL_1, val); - - /* IOSEL2 gets the most significant 16 bits */ - val = (iosel >> 16) & 0x7; - __set_iosel2(ssp, 0x7 << shift, val << shift); -} - -int ti_ssp_set_iosel(struct device *dev, u32 iosel) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev); - - spin_lock(&ssp->lock); - __set_iosel(ssp, port, iosel); - spin_unlock(&ssp->lock); - - return 0; -} -EXPORT_SYMBOL(ti_ssp_set_iosel); - -int ti_ssp_load(struct device *dev, int offs, u32* prog, int len) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev); - int i; - - if (len > SSP_PORT_SEQRAM_SIZE) - return -ENOSPC; - - spin_lock(&ssp->lock); - - /* Enable SeqRAM access */ - ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); - - /* Copy code */ - for (i = 0; i < len; i++) { - __raw_writel(prog[i], ssp->regs + offs + 4*i + - ssp_port_seqram[port]); - } - - /* Disable SeqRAM access */ - ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); - - spin_unlock(&ssp->lock); - - return 0; -} -EXPORT_SYMBOL(ti_ssp_load); - -int ti_ssp_raw_read(struct device *dev) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev); - int shift = port ? 27 : 11; - - return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf; -} -EXPORT_SYMBOL(ti_ssp_raw_read); - -int ti_ssp_raw_write(struct device *dev, u32 val) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev), shift; - - spin_lock(&ssp->lock); - - shift = port ? 22 : 6; - val &= 0xf; - __set_iosel2(ssp, 0xf << shift, val << shift); - - spin_unlock(&ssp->lock); - - return 0; -} -EXPORT_SYMBOL(ti_ssp_raw_write); - -static inline int __xfer_done(struct ti_ssp *ssp, int port) -{ - return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY); -} - -int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output) -{ - struct ti_ssp *ssp = dev_to_ssp(dev); - int port = dev_to_port(dev); - int ret; - - if (pc & ~(0x3f)) - return -EINVAL; - - /* Grab ssp->lock to serialize rmw on ssp registers */ - spin_lock(&ssp->lock); - - ssp_port_write(ssp, port, PORT_ADDR, input >> 16); - ssp_port_write(ssp, port, PORT_DATA, input & 0xffff); - ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc); - - /* grab wait queue head lock to avoid race with the isr */ - spin_lock_irq(&ssp->wqh.lock); - - /* kick off sequence execution in hardware */ - ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START); - - /* drop ssp lock; no register writes beyond this */ - spin_unlock(&ssp->lock); - - ret = wait_event_interruptible_locked_irq(ssp->wqh, - __xfer_done(ssp, port)); - spin_unlock_irq(&ssp->wqh.lock); - - if (ret < 0) - return ret; - - if (output) { - *output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) | - (ssp_port_read(ssp, port, PORT_DATA) & 0xffff); - } - - ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */ - - return ret; -} -EXPORT_SYMBOL(ti_ssp_run); - -static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data) -{ - struct ti_ssp *ssp = dev_data; - - spin_lock(&ssp->wqh.lock); - - ssp_write(ssp, REG_INTR_ST, 0x3); - wake_up_locked(&ssp->wqh); - - spin_unlock(&ssp->wqh.lock); - - return IRQ_HANDLED; -} - -static int ti_ssp_probe(struct platform_device *pdev) -{ - static struct ti_ssp *ssp; - const struct ti_ssp_data *pdata = dev_get_platdata(&pdev->dev); - int error = 0, prediv = 0xff, id; - unsigned long sysclk; - struct device *dev = &pdev->dev; - struct mfd_cell cells[2]; - - ssp = kzalloc(sizeof(*ssp), GFP_KERNEL); - if (!ssp) { - dev_err(dev, "cannot allocate device info\n"); - return -ENOMEM; - } - - ssp->dev = dev; - dev_set_drvdata(dev, ssp); - - ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!ssp->res) { - error = -ENODEV; - dev_err(dev, "cannot determine register area\n"); - goto error_res; - } - - if (!request_mem_region(ssp->res->start, resource_size(ssp->res), - pdev->name)) { - error = -ENOMEM; - dev_err(dev, "cannot claim register memory\n"); - goto error_res; - } - - ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res)); - if (!ssp->regs) { - error = -ENOMEM; - dev_err(dev, "cannot map register memory\n"); - goto error_map; - } - - ssp->clk = clk_get(dev, NULL); - if (IS_ERR(ssp->clk)) { - error = PTR_ERR(ssp->clk); - dev_err(dev, "cannot claim device clock\n"); - goto error_clk; - } - - ssp->irq = platform_get_irq(pdev, 0); - if (ssp->irq < 0) { - error = -ENODEV; - dev_err(dev, "unknown irq\n"); - goto error_irq; - } - - error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0, - dev_name(dev), ssp); - if (error < 0) { - dev_err(dev, "cannot acquire irq\n"); - goto error_irq; - } - - spin_lock_init(&ssp->lock); - init_waitqueue_head(&ssp->wqh); - - /* Power on and initialize SSP */ - error = clk_enable(ssp->clk); - if (error) { - dev_err(dev, "cannot enable device clock\n"); - goto error_enable; - } - - /* Reset registers to a sensible known state */ - ssp_write(ssp, REG_IOSEL_1, 0); - ssp_write(ssp, REG_IOSEL_2, 0); - ssp_write(ssp, REG_INTR_EN, 0x3); - ssp_write(ssp, REG_INTR_ST, 0x3); - ssp_write(ssp, REG_TEST_CTRL, 0); - ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL); - ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL); - ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1); - ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1); - - sysclk = clk_get_rate(ssp->clk); - if (pdata && pdata->out_clock) - prediv = (sysclk / pdata->out_clock) - 1; - prediv = clamp(prediv, 0, 0xff); - ssp_rmw(ssp, REG_PREDIV, 0xff, prediv); - - memset(cells, 0, sizeof(cells)); - for (id = 0; id < 2; id++) { - const struct ti_ssp_dev_data *data = &pdata->dev_data[id]; - - cells[id].id = id; - cells[id].name = data->dev_name; - cells[id].platform_data = data->pdata; - } - - error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); - if (error < 0) { - dev_err(dev, "cannot add mfd cells\n"); - goto error_enable; - } - - return 0; - -error_enable: - free_irq(ssp->irq, ssp); -error_irq: - clk_put(ssp->clk); -error_clk: - iounmap(ssp->regs); -error_map: - release_mem_region(ssp->res->start, resource_size(ssp->res)); -error_res: - kfree(ssp); - return error; -} - -static int ti_ssp_remove(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct ti_ssp *ssp = dev_get_drvdata(dev); - - mfd_remove_devices(dev); - clk_disable(ssp->clk); - free_irq(ssp->irq, ssp); - clk_put(ssp->clk); - iounmap(ssp->regs); - release_mem_region(ssp->res->start, resource_size(ssp->res)); - kfree(ssp); - return 0; -} - -static struct platform_driver ti_ssp_driver = { - .probe = ti_ssp_probe, - .remove = ti_ssp_remove, - .driver = { - .name = "ti-ssp", - .owner = THIS_MODULE, - } -}; - -module_platform_driver(ti_ssp_driver); - -MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver"); -MODULE_AUTHOR("Cyril Chemparathy"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ti-ssp"); diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index d4e860413bb5..dd4bf5816221 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -14,7 +14,6 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> @@ -184,12 +183,6 @@ static int ti_tscadc_probe(struct platform_device *pdev) return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource defined.\n"); - return -EINVAL; - } - /* Allocate memory for device */ tscadc = devm_kzalloc(&pdev->dev, sizeof(struct ti_tscadc_dev), GFP_KERNEL); @@ -206,19 +199,10 @@ static int ti_tscadc_probe(struct platform_device *pdev) } else tscadc->irq = err; - res = devm_request_mem_region(&pdev->dev, - res->start, resource_size(res), pdev->name); - if (!res) { - dev_err(&pdev->dev, "failed to reserve registers.\n"); - return -EBUSY; - } - - tscadc->tscadc_base = devm_ioremap(&pdev->dev, - res->start, resource_size(res)); - if (!tscadc->tscadc_base) { - dev_err(&pdev->dev, "failed to map registers.\n"); - return -ENOMEM; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tscadc->tscadc_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tscadc->tscadc_base)) + return PTR_ERR(tscadc->tscadc_base); tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev, tscadc->tscadc_base, &tscadc_regmap_config); diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index 2bc5cfb85204..6ce36d6970a4 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -715,7 +715,7 @@ static int timb_probe(struct pci_dev *dev, for (i = 0; i < TIMBERDALE_NR_IRQS; i++) msix_entries[i].entry = i; - err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS); + err = pci_enable_msix_exact(dev, msix_entries, TIMBERDALE_NR_IRQS); if (err) { dev_err(&dev->dev, "MSI-X init failed: %d, expected entries: %d\n", diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c new file mode 100644 index 000000000000..a74bfb59f18f --- /dev/null +++ b/drivers/mfd/tps65218.c @@ -0,0 +1,282 @@ +/* + * Driver for TPS65218 Integrated power management chipsets + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> + +#include <linux/mfd/core.h> +#include <linux/mfd/tps65218.h> + +#define TPS65218_PASSWORD_REGS_UNLOCK 0x7D + +/** + * tps65218_reg_read: Read a single tps65218 register. + * + * @tps: Device to read from. + * @reg: Register to read. + * @val: Contians the value + */ +int tps65218_reg_read(struct tps65218 *tps, unsigned int reg, + unsigned int *val) +{ + return regmap_read(tps->regmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65218_reg_read); + +/** + * tps65218_reg_write: Write a single tps65218 register. + * + * @tps65218: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + * @level: Password protected level + */ +int tps65218_reg_write(struct tps65218 *tps, unsigned int reg, + unsigned int val, unsigned int level) +{ + int ret; + unsigned int xor_reg_val; + + switch (level) { + case TPS65218_PROTECT_NONE: + return regmap_write(tps->regmap, reg, val); + case TPS65218_PROTECT_L1: + xor_reg_val = reg ^ TPS65218_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65218_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + + return regmap_write(tps->regmap, reg, val); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(tps65218_reg_write); + +/** + * tps65218_update_bits: Modify bits w.r.t mask, val and level. + * + * @tps65218: Device to write to. + * @reg: Register to read-write to. + * @mask: Mask. + * @val: Value to write. + * @level: Password protected level + */ +static int tps65218_update_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + int ret; + unsigned int data; + + ret = tps65218_reg_read(tps, reg, &data); + if (ret) { + dev_err(tps->dev, "Read from reg 0x%x failed\n", reg); + return ret; + } + + data &= ~mask; + data |= val & mask; + + mutex_lock(&tps->tps_lock); + ret = tps65218_reg_write(tps, reg, data, level); + if (ret) + dev_err(tps->dev, "Write for reg 0x%x failed\n", reg); + mutex_unlock(&tps->tps_lock); + + return ret; +} + +int tps65218_set_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + return tps65218_update_bits(tps, reg, mask, val, level); +} +EXPORT_SYMBOL_GPL(tps65218_set_bits); + +int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int level) +{ + return tps65218_update_bits(tps, reg, mask, 0, level); +} +EXPORT_SYMBOL_GPL(tps65218_clear_bits); + +static struct regmap_config tps65218_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct regmap_irq tps65218_irqs[] = { + /* INT1 IRQs */ + [TPS65218_PRGC_IRQ] = { + .mask = TPS65218_INT1_PRGC, + }, + [TPS65218_CC_AQC_IRQ] = { + .mask = TPS65218_INT1_CC_AQC, + }, + [TPS65218_HOT_IRQ] = { + .mask = TPS65218_INT1_HOT, + }, + [TPS65218_PB_IRQ] = { + .mask = TPS65218_INT1_PB, + }, + [TPS65218_AC_IRQ] = { + .mask = TPS65218_INT1_AC, + }, + [TPS65218_VPRG_IRQ] = { + .mask = TPS65218_INT1_VPRG, + }, + [TPS65218_INVALID1_IRQ] = { + }, + [TPS65218_INVALID2_IRQ] = { + }, + /* INT2 IRQs*/ + [TPS65218_LS1_I_IRQ] = { + .mask = TPS65218_INT2_LS1_I, + .reg_offset = 1, + }, + [TPS65218_LS2_I_IRQ] = { + .mask = TPS65218_INT2_LS2_I, + .reg_offset = 1, + }, + [TPS65218_LS3_I_IRQ] = { + .mask = TPS65218_INT2_LS3_I, + .reg_offset = 1, + }, + [TPS65218_LS1_F_IRQ] = { + .mask = TPS65218_INT2_LS1_F, + .reg_offset = 1, + }, + [TPS65218_LS2_F_IRQ] = { + .mask = TPS65218_INT2_LS2_F, + .reg_offset = 1, + }, + [TPS65218_LS3_F_IRQ] = { + .mask = TPS65218_INT2_LS3_F, + .reg_offset = 1, + }, + [TPS65218_INVALID3_IRQ] = { + }, + [TPS65218_INVALID4_IRQ] = { + }, +}; + +static struct regmap_irq_chip tps65218_irq_chip = { + .name = "tps65218", + .irqs = tps65218_irqs, + .num_irqs = ARRAY_SIZE(tps65218_irqs), + + .num_regs = 2, + .mask_base = TPS65218_REG_INT_MASK1, +}; + +static const struct of_device_id of_tps65218_match_table[] = { + { .compatible = "ti,tps65218", }, +}; + +static int tps65218_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct tps65218 *tps; + const struct of_device_id *match; + int ret; + + match = of_match_device(of_tps65218_match_table, &client->dev); + if (!match) { + dev_err(&client->dev, + "Failed to find matching dt id\n"); + return -EINVAL; + } + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + tps->irq = client->irq; + tps->regmap = devm_regmap_init_i2c(client, &tps65218_regmap_config); + if (IS_ERR(tps->regmap)) { + ret = PTR_ERR(tps->regmap); + dev_err(tps->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + mutex_init(&tps->tps_lock); + + ret = regmap_add_irq_chip(tps->regmap, tps->irq, + IRQF_ONESHOT, 0, &tps65218_irq_chip, + &tps->irq_data); + if (ret < 0) + return ret; + + ret = of_platform_populate(client->dev.of_node, NULL, NULL, + &client->dev); + if (ret < 0) + goto err_irq; + + return 0; + +err_irq: + regmap_del_irq_chip(tps->irq, tps->irq_data); + + return ret; +} + +static int tps65218_remove(struct i2c_client *client) +{ + struct tps65218 *tps = i2c_get_clientdata(client); + + regmap_del_irq_chip(tps->irq, tps->irq_data); + + return 0; +} + +static const struct i2c_device_id tps65218_id_table[] = { + { "tps65218", TPS65218 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps65218_id_table); + +static struct i2c_driver tps65218_driver = { + .driver = { + .name = "tps65218", + .owner = THIS_MODULE, + .of_match_table = of_tps65218_match_table, + }, + .probe = tps65218_probe, + .remove = tps65218_remove, + .id_table = tps65218_id_table, +}; + +module_i2c_driver(tps65218_driver); + +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); +MODULE_DESCRIPTION("TPS65218 chip family multi-function driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 1f142d76cbbc..460a014ca629 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -255,8 +255,10 @@ static int tps65910_irq_init(struct tps65910 *tps65910, int irq, ret = regmap_add_irq_chip(tps65910->regmap, tps65910->chip_irq, IRQF_ONESHOT, pdata->irq_base, tps6591x_irqs_chip, &tps65910->irq_data); - if (ret < 0) + if (ret < 0) { dev_warn(tps65910->dev, "Failed to add irq_chip %d\n", ret); + tps65910->chip_irq = 0; + } return ret; } @@ -509,6 +511,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, regmap_irq_get_domain(tps65910->irq_data)); if (ret < 0) { dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret); + tps65910_irq_exit(tps65910); return ret; } diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 27a518e0eec6..1f82d60b1d0f 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/gpio.h> #include <linux/mfd/core.h> diff --git a/drivers/mfd/tps65912-irq.c b/drivers/mfd/tps65912-irq.c index d360a83a2738..fbecec7f1e3d 100644 --- a/drivers/mfd/tps65912-irq.c +++ b/drivers/mfd/tps65912-irq.c @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/bug.h> #include <linux/device.h> #include <linux/interrupt.h> diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index ed718328eff1..e87140bef667 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -282,11 +282,11 @@ static struct reg_default twl4030_49_defaults[] = { static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg) { switch (reg) { - case 0: - case 3: - case 40: - case 41: - case 42: + case 0x00: + case 0x03: + case 0x40: + case 0x41: + case 0x42: return false; default: return true; diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 9aa6d1efa241..596b1f657e21 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -27,7 +27,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/init.h> #include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index 18a607e2ca06..a6bb17d908b8 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -31,7 +31,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/init.h> #include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index 75316fb33448..6e88f25832fb 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -661,6 +661,11 @@ static int twl6040_probe(struct i2c_client *client, init_completion(&twl6040->ready); twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); + if (twl6040->rev < 0) { + dev_err(&client->dev, "Failed to read revision register: %d\n", + twl6040->rev); + goto gpio_err; + } /* ERRATA: Automatic power-up is not possible in ES1.0 */ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) @@ -703,7 +708,6 @@ static int twl6040_probe(struct i2c_client *client, } /* dual-access registers controlled by I2C only */ - twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL); regmap_register_patch(twl6040->regmap, twl6040_patch, ARRAY_SIZE(twl6040_patch)); diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 0313f839e8fa..153d595afaac 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -742,9 +742,7 @@ static int ucb1x00_resume(struct device *dev) } #endif -static const struct dev_pm_ops ucb1x00_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume) -}; +static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume); static struct mcp_driver ucb1x00_driver = { .drv = { diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c index 84ce6b9daa3d..d0db89d13e01 100644 --- a/drivers/mfd/vexpress-config.c +++ b/drivers/mfd/vexpress-config.c @@ -16,7 +16,6 @@ #include <linux/bitops.h> #include <linux/completion.h> #include <linux/export.h> -#include <linux/init.h> #include <linux/list.h> #include <linux/of.h> #include <linux/of_device.h> @@ -27,7 +26,7 @@ #define VEXPRESS_CONFIG_MAX_BRIDGES 2 -struct vexpress_config_bridge { +static struct vexpress_config_bridge { struct device_node *node; struct vexpress_config_bridge_info *info; struct list_head transactions; diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 981bef4b7ebc..35281e804e7e 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -168,7 +168,7 @@ static void *vexpress_sysreg_config_func_get(struct device *dev, struct device_node *node) { struct vexpress_sysreg_config_func *config_func; - u32 site; + u32 site = 0; u32 position = 0; u32 dcc = 0; u32 func_device[2]; diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index bffc584e4a43..070f8cfbbd7a 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -73,6 +73,7 @@ static const struct reg_default wm5102_revb_patch[] = { { 0x171, 0x0000 }, { 0x35E, 0x000C }, { 0x2D4, 0x0000 }, + { 0x4DC, 0x0900 }, { 0x80, 0x0000 }, }; @@ -1839,6 +1840,23 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_WDMA_BUFFER_1: + case ARIZONA_DSP1_WDMA_BUFFER_2: + case ARIZONA_DSP1_WDMA_BUFFER_3: + case ARIZONA_DSP1_WDMA_BUFFER_4: + case ARIZONA_DSP1_WDMA_BUFFER_5: + case ARIZONA_DSP1_WDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_BUFFER_7: + case ARIZONA_DSP1_WDMA_BUFFER_8: + case ARIZONA_DSP1_RDMA_BUFFER_1: + case ARIZONA_DSP1_RDMA_BUFFER_2: + case ARIZONA_DSP1_RDMA_BUFFER_3: + case ARIZONA_DSP1_RDMA_BUFFER_4: + case ARIZONA_DSP1_RDMA_BUFFER_5: + case ARIZONA_DSP1_RDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_CONFIG_1: + case ARIZONA_DSP1_WDMA_CONFIG_2: + case ARIZONA_DSP1_RDMA_CONFIG_1: case ARIZONA_DSP1_SCRATCH_0: case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: @@ -1894,9 +1912,27 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_AOD_IRQ1: case ARIZONA_AOD_IRQ2: case ARIZONA_AOD_IRQ_RAW_STATUS: + case ARIZONA_DSP1_CLOCKING_1: case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_WDMA_BUFFER_1: + case ARIZONA_DSP1_WDMA_BUFFER_2: + case ARIZONA_DSP1_WDMA_BUFFER_3: + case ARIZONA_DSP1_WDMA_BUFFER_4: + case ARIZONA_DSP1_WDMA_BUFFER_5: + case ARIZONA_DSP1_WDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_BUFFER_7: + case ARIZONA_DSP1_WDMA_BUFFER_8: + case ARIZONA_DSP1_RDMA_BUFFER_1: + case ARIZONA_DSP1_RDMA_BUFFER_2: + case ARIZONA_DSP1_RDMA_BUFFER_3: + case ARIZONA_DSP1_RDMA_BUFFER_4: + case ARIZONA_DSP1_RDMA_BUFFER_5: + case ARIZONA_DSP1_RDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_CONFIG_1: + case ARIZONA_DSP1_WDMA_CONFIG_2: + case ARIZONA_DSP1_RDMA_CONFIG_1: case ARIZONA_DSP1_SCRATCH_0: case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 11632f135e8c..1942b6f231da 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -538,7 +538,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ - { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */ + { 0x0000029B, 0x0028 }, /* R667 - Headphone Detect 1 */ { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */ { 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */ { 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */ @@ -2461,6 +2461,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_STATUS_4: + case ARIZONA_DSP1_WDMA_BUFFER_1: + case ARIZONA_DSP1_WDMA_BUFFER_2: + case ARIZONA_DSP1_WDMA_BUFFER_3: + case ARIZONA_DSP1_WDMA_BUFFER_4: + case ARIZONA_DSP1_WDMA_BUFFER_5: + case ARIZONA_DSP1_WDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_BUFFER_7: + case ARIZONA_DSP1_WDMA_BUFFER_8: + case ARIZONA_DSP1_RDMA_BUFFER_1: + case ARIZONA_DSP1_RDMA_BUFFER_2: + case ARIZONA_DSP1_RDMA_BUFFER_3: + case ARIZONA_DSP1_RDMA_BUFFER_4: + case ARIZONA_DSP1_RDMA_BUFFER_5: + case ARIZONA_DSP1_RDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_CONFIG_1: + case ARIZONA_DSP1_WDMA_CONFIG_2: + case ARIZONA_DSP1_WDMA_OFFSET_1: + case ARIZONA_DSP1_RDMA_CONFIG_1: + case ARIZONA_DSP1_RDMA_OFFSET_1: + case ARIZONA_DSP1_EXTERNAL_START_SELECT_1: case ARIZONA_DSP1_SCRATCH_0: case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: @@ -2470,6 +2491,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP2_STATUS_1: case ARIZONA_DSP2_STATUS_2: case ARIZONA_DSP2_STATUS_3: + case ARIZONA_DSP2_STATUS_4: + case ARIZONA_DSP2_WDMA_BUFFER_1: + case ARIZONA_DSP2_WDMA_BUFFER_2: + case ARIZONA_DSP2_WDMA_BUFFER_3: + case ARIZONA_DSP2_WDMA_BUFFER_4: + case ARIZONA_DSP2_WDMA_BUFFER_5: + case ARIZONA_DSP2_WDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_BUFFER_7: + case ARIZONA_DSP2_WDMA_BUFFER_8: + case ARIZONA_DSP2_RDMA_BUFFER_1: + case ARIZONA_DSP2_RDMA_BUFFER_2: + case ARIZONA_DSP2_RDMA_BUFFER_3: + case ARIZONA_DSP2_RDMA_BUFFER_4: + case ARIZONA_DSP2_RDMA_BUFFER_5: + case ARIZONA_DSP2_RDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_CONFIG_1: + case ARIZONA_DSP2_WDMA_CONFIG_2: + case ARIZONA_DSP2_WDMA_OFFSET_1: + case ARIZONA_DSP2_RDMA_CONFIG_1: + case ARIZONA_DSP2_RDMA_OFFSET_1: + case ARIZONA_DSP2_EXTERNAL_START_SELECT_1: case ARIZONA_DSP2_SCRATCH_0: case ARIZONA_DSP2_SCRATCH_1: case ARIZONA_DSP2_SCRATCH_2: @@ -2479,6 +2521,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP3_STATUS_1: case ARIZONA_DSP3_STATUS_2: case ARIZONA_DSP3_STATUS_3: + case ARIZONA_DSP3_STATUS_4: + case ARIZONA_DSP3_WDMA_BUFFER_1: + case ARIZONA_DSP3_WDMA_BUFFER_2: + case ARIZONA_DSP3_WDMA_BUFFER_3: + case ARIZONA_DSP3_WDMA_BUFFER_4: + case ARIZONA_DSP3_WDMA_BUFFER_5: + case ARIZONA_DSP3_WDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_BUFFER_7: + case ARIZONA_DSP3_WDMA_BUFFER_8: + case ARIZONA_DSP3_RDMA_BUFFER_1: + case ARIZONA_DSP3_RDMA_BUFFER_2: + case ARIZONA_DSP3_RDMA_BUFFER_3: + case ARIZONA_DSP3_RDMA_BUFFER_4: + case ARIZONA_DSP3_RDMA_BUFFER_5: + case ARIZONA_DSP3_RDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_CONFIG_1: + case ARIZONA_DSP3_WDMA_CONFIG_2: + case ARIZONA_DSP3_WDMA_OFFSET_1: + case ARIZONA_DSP3_RDMA_CONFIG_1: + case ARIZONA_DSP3_RDMA_OFFSET_1: + case ARIZONA_DSP3_EXTERNAL_START_SELECT_1: case ARIZONA_DSP3_SCRATCH_0: case ARIZONA_DSP3_SCRATCH_1: case ARIZONA_DSP3_SCRATCH_2: @@ -2488,6 +2551,27 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP4_STATUS_1: case ARIZONA_DSP4_STATUS_2: case ARIZONA_DSP4_STATUS_3: + case ARIZONA_DSP4_STATUS_4: + case ARIZONA_DSP4_WDMA_BUFFER_1: + case ARIZONA_DSP4_WDMA_BUFFER_2: + case ARIZONA_DSP4_WDMA_BUFFER_3: + case ARIZONA_DSP4_WDMA_BUFFER_4: + case ARIZONA_DSP4_WDMA_BUFFER_5: + case ARIZONA_DSP4_WDMA_BUFFER_6: + case ARIZONA_DSP4_WDMA_BUFFER_7: + case ARIZONA_DSP4_WDMA_BUFFER_8: + case ARIZONA_DSP4_RDMA_BUFFER_1: + case ARIZONA_DSP4_RDMA_BUFFER_2: + case ARIZONA_DSP4_RDMA_BUFFER_3: + case ARIZONA_DSP4_RDMA_BUFFER_4: + case ARIZONA_DSP4_RDMA_BUFFER_5: + case ARIZONA_DSP4_RDMA_BUFFER_6: + case ARIZONA_DSP4_WDMA_CONFIG_1: + case ARIZONA_DSP4_WDMA_CONFIG_2: + case ARIZONA_DSP4_WDMA_OFFSET_1: + case ARIZONA_DSP4_RDMA_CONFIG_1: + case ARIZONA_DSP4_RDMA_OFFSET_1: + case ARIZONA_DSP4_EXTERNAL_START_SELECT_1: case ARIZONA_DSP4_SCRATCH_0: case ARIZONA_DSP4_SCRATCH_1: case ARIZONA_DSP4_SCRATCH_2: @@ -2543,31 +2627,119 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_STATUS_4: + case ARIZONA_DSP1_WDMA_BUFFER_1: + case ARIZONA_DSP1_WDMA_BUFFER_2: + case ARIZONA_DSP1_WDMA_BUFFER_3: + case ARIZONA_DSP1_WDMA_BUFFER_4: + case ARIZONA_DSP1_WDMA_BUFFER_5: + case ARIZONA_DSP1_WDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_BUFFER_7: + case ARIZONA_DSP1_WDMA_BUFFER_8: + case ARIZONA_DSP1_RDMA_BUFFER_1: + case ARIZONA_DSP1_RDMA_BUFFER_2: + case ARIZONA_DSP1_RDMA_BUFFER_3: + case ARIZONA_DSP1_RDMA_BUFFER_4: + case ARIZONA_DSP1_RDMA_BUFFER_5: + case ARIZONA_DSP1_RDMA_BUFFER_6: + case ARIZONA_DSP1_WDMA_CONFIG_1: + case ARIZONA_DSP1_WDMA_CONFIG_2: + case ARIZONA_DSP1_WDMA_OFFSET_1: + case ARIZONA_DSP1_RDMA_CONFIG_1: + case ARIZONA_DSP1_RDMA_OFFSET_1: + case ARIZONA_DSP1_EXTERNAL_START_SELECT_1: case ARIZONA_DSP1_SCRATCH_0: case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: case ARIZONA_DSP1_SCRATCH_3: + case ARIZONA_DSP1_CLOCKING_1: case ARIZONA_DSP2_STATUS_1: case ARIZONA_DSP2_STATUS_2: case ARIZONA_DSP2_STATUS_3: + case ARIZONA_DSP2_STATUS_4: + case ARIZONA_DSP2_WDMA_BUFFER_1: + case ARIZONA_DSP2_WDMA_BUFFER_2: + case ARIZONA_DSP2_WDMA_BUFFER_3: + case ARIZONA_DSP2_WDMA_BUFFER_4: + case ARIZONA_DSP2_WDMA_BUFFER_5: + case ARIZONA_DSP2_WDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_BUFFER_7: + case ARIZONA_DSP2_WDMA_BUFFER_8: + case ARIZONA_DSP2_RDMA_BUFFER_1: + case ARIZONA_DSP2_RDMA_BUFFER_2: + case ARIZONA_DSP2_RDMA_BUFFER_3: + case ARIZONA_DSP2_RDMA_BUFFER_4: + case ARIZONA_DSP2_RDMA_BUFFER_5: + case ARIZONA_DSP2_RDMA_BUFFER_6: + case ARIZONA_DSP2_WDMA_CONFIG_1: + case ARIZONA_DSP2_WDMA_CONFIG_2: + case ARIZONA_DSP2_WDMA_OFFSET_1: + case ARIZONA_DSP2_RDMA_CONFIG_1: + case ARIZONA_DSP2_RDMA_OFFSET_1: + case ARIZONA_DSP2_EXTERNAL_START_SELECT_1: case ARIZONA_DSP2_SCRATCH_0: case ARIZONA_DSP2_SCRATCH_1: case ARIZONA_DSP2_SCRATCH_2: case ARIZONA_DSP2_SCRATCH_3: + case ARIZONA_DSP2_CLOCKING_1: case ARIZONA_DSP3_STATUS_1: case ARIZONA_DSP3_STATUS_2: case ARIZONA_DSP3_STATUS_3: + case ARIZONA_DSP3_STATUS_4: + case ARIZONA_DSP3_WDMA_BUFFER_1: + case ARIZONA_DSP3_WDMA_BUFFER_2: + case ARIZONA_DSP3_WDMA_BUFFER_3: + case ARIZONA_DSP3_WDMA_BUFFER_4: + case ARIZONA_DSP3_WDMA_BUFFER_5: + case ARIZONA_DSP3_WDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_BUFFER_7: + case ARIZONA_DSP3_WDMA_BUFFER_8: + case ARIZONA_DSP3_RDMA_BUFFER_1: + case ARIZONA_DSP3_RDMA_BUFFER_2: + case ARIZONA_DSP3_RDMA_BUFFER_3: + case ARIZONA_DSP3_RDMA_BUFFER_4: + case ARIZONA_DSP3_RDMA_BUFFER_5: + case ARIZONA_DSP3_RDMA_BUFFER_6: + case ARIZONA_DSP3_WDMA_CONFIG_1: + case ARIZONA_DSP3_WDMA_CONFIG_2: + case ARIZONA_DSP3_WDMA_OFFSET_1: + case ARIZONA_DSP3_RDMA_CONFIG_1: + case ARIZONA_DSP3_RDMA_OFFSET_1: + case ARIZONA_DSP3_EXTERNAL_START_SELECT_1: case ARIZONA_DSP3_SCRATCH_0: case ARIZONA_DSP3_SCRATCH_1: case ARIZONA_DSP3_SCRATCH_2: case ARIZONA_DSP3_SCRATCH_3: + case ARIZONA_DSP3_CLOCKING_1: case ARIZONA_DSP4_STATUS_1: case ARIZONA_DSP4_STATUS_2: case ARIZONA_DSP4_STATUS_3: + case ARIZONA_DSP4_STATUS_4: + case ARIZONA_DSP4_WDMA_BUFFER_1: + case ARIZONA_DSP4_WDMA_BUFFER_2: + case ARIZONA_DSP4_WDMA_BUFFER_3: + case ARIZONA_DSP4_WDMA_BUFFER_4: + case ARIZONA_DSP4_WDMA_BUFFER_5: + case ARIZONA_DSP4_WDMA_BUFFER_6: + case ARIZONA_DSP4_WDMA_BUFFER_7: + case ARIZONA_DSP4_WDMA_BUFFER_8: + case ARIZONA_DSP4_RDMA_BUFFER_1: + case ARIZONA_DSP4_RDMA_BUFFER_2: + case ARIZONA_DSP4_RDMA_BUFFER_3: + case ARIZONA_DSP4_RDMA_BUFFER_4: + case ARIZONA_DSP4_RDMA_BUFFER_5: + case ARIZONA_DSP4_RDMA_BUFFER_6: + case ARIZONA_DSP4_WDMA_CONFIG_1: + case ARIZONA_DSP4_WDMA_CONFIG_2: + case ARIZONA_DSP4_WDMA_OFFSET_1: + case ARIZONA_DSP4_RDMA_CONFIG_1: + case ARIZONA_DSP4_RDMA_OFFSET_1: + case ARIZONA_DSP4_EXTERNAL_START_SELECT_1: case ARIZONA_DSP4_SCRATCH_0: case ARIZONA_DSP4_SCRATCH_1: case ARIZONA_DSP4_SCRATCH_2: case ARIZONA_DSP4_SCRATCH_3: + case ARIZONA_DSP4_CLOCKING_1: return true; default: return wm5110_is_adsp_memory(dev, reg); diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 7c1ae24605d9..4ab527f5c53b 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/bug.h> #include <linux/device.h> diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index 624ff90501cd..cd01f7962dfd 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/bug.h> #include <linux/device.h> #include <linux/interrupt.h> diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index d66d256551fb..e5eae751aa1b 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -161,31 +161,19 @@ static int wm8400_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm8400 *wm8400; - int ret; wm8400 = devm_kzalloc(&i2c->dev, sizeof(struct wm8400), GFP_KERNEL); - if (wm8400 == NULL) { - ret = -ENOMEM; - goto err; - } + if (!wm8400) + return -ENOMEM; wm8400->regmap = devm_regmap_init_i2c(i2c, &wm8400_regmap_config); - if (IS_ERR(wm8400->regmap)) { - ret = PTR_ERR(wm8400->regmap); - goto err; - } + if (IS_ERR(wm8400->regmap)) + return PTR_ERR(wm8400->regmap); wm8400->dev = &i2c->dev; i2c_set_clientdata(i2c, wm8400); - ret = wm8400_init(wm8400, dev_get_platdata(&i2c->dev)); - if (ret != 0) - goto err; - - return 0; - -err: - return ret; + return wm8400_init(wm8400, dev_get_platdata(&i2c->dev)); } static int wm8400_i2c_remove(struct i2c_client *i2c) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 0e6c0333f775..0ba1b7c99760 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -48,7 +48,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.10" +#define DRV_VERSION "1.11" /* Includes */ #include <linux/module.h> /* For module specific items */ @@ -92,9 +92,12 @@ static struct { /* this is private data for the iTCO_wdt device */ unsigned int iTCO_version; struct resource *tco_res; struct resource *smi_res; - struct resource *gcs_res; - /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/ - unsigned long __iomem *gcs; + /* + * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2), + * or memory-mapped PMC register bit 4 (TCO version 3). + */ + struct resource *gcs_pmc_res; + unsigned long __iomem *gcs_pmc; /* the lock for io operations */ spinlock_t io_lock; struct platform_device *dev; @@ -125,11 +128,19 @@ MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, * Some TCO specific functions */ -static inline unsigned int seconds_to_ticks(int seconds) +/* + * The iTCO v1 and v2's internal timer is stored as ticks which decrement + * every 0.6 seconds. v3's internal timer is stored as seconds (some + * datasheets incorrectly state 0.6 seconds). + */ +static inline unsigned int seconds_to_ticks(int secs) { - /* the internal timer is stored as ticks which decrement - * every 0.6 seconds */ - return (seconds * 10) / 6; + return iTCO_wdt_private.iTCO_version == 3 ? secs : (secs * 10) / 6; +} + +static inline unsigned int ticks_to_seconds(int ticks) +{ + return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10; } static void iTCO_wdt_set_NO_REBOOT_bit(void) @@ -137,10 +148,14 @@ static void iTCO_wdt_set_NO_REBOOT_bit(void) u32 val32; /* Set the NO_REBOOT bit: this disables reboots */ - if (iTCO_wdt_private.iTCO_version == 2) { - val32 = readl(iTCO_wdt_private.gcs); + if (iTCO_wdt_private.iTCO_version == 3) { + val32 = readl(iTCO_wdt_private.gcs_pmc); + val32 |= 0x00000010; + writel(val32, iTCO_wdt_private.gcs_pmc); + } else if (iTCO_wdt_private.iTCO_version == 2) { + val32 = readl(iTCO_wdt_private.gcs_pmc); val32 |= 0x00000020; - writel(val32, iTCO_wdt_private.gcs); + writel(val32, iTCO_wdt_private.gcs_pmc); } else if (iTCO_wdt_private.iTCO_version == 1) { pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); val32 |= 0x00000002; @@ -154,12 +169,20 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) u32 val32; /* Unset the NO_REBOOT bit: this enables reboots */ - if (iTCO_wdt_private.iTCO_version == 2) { - val32 = readl(iTCO_wdt_private.gcs); + if (iTCO_wdt_private.iTCO_version == 3) { + val32 = readl(iTCO_wdt_private.gcs_pmc); + val32 &= 0xffffffef; + writel(val32, iTCO_wdt_private.gcs_pmc); + + val32 = readl(iTCO_wdt_private.gcs_pmc); + if (val32 & 0x00000010) + ret = -EIO; + } else if (iTCO_wdt_private.iTCO_version == 2) { + val32 = readl(iTCO_wdt_private.gcs_pmc); val32 &= 0xffffffdf; - writel(val32, iTCO_wdt_private.gcs); + writel(val32, iTCO_wdt_private.gcs_pmc); - val32 = readl(iTCO_wdt_private.gcs); + val32 = readl(iTCO_wdt_private.gcs_pmc); if (val32 & 0x00000020) ret = -EIO; } else if (iTCO_wdt_private.iTCO_version == 1) { @@ -192,7 +215,7 @@ static int iTCO_wdt_start(struct watchdog_device *wd_dev) /* Force the timer to its reload value by writing to the TCO_RLD register */ - if (iTCO_wdt_private.iTCO_version == 2) + if (iTCO_wdt_private.iTCO_version >= 2) outw(0x01, TCO_RLD); else if (iTCO_wdt_private.iTCO_version == 1) outb(0x01, TCO_RLD); @@ -240,9 +263,9 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev) iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, wd_dev->timeout); /* Reload the timer by writing to the TCO Timer Counter register */ - if (iTCO_wdt_private.iTCO_version == 2) + if (iTCO_wdt_private.iTCO_version >= 2) { outw(0x01, TCO_RLD); - else if (iTCO_wdt_private.iTCO_version == 1) { + } else if (iTCO_wdt_private.iTCO_version == 1) { /* Reset the timeout status bit so that the timer * needs to count down twice again before rebooting */ outw(0x0008, TCO1_STS); /* write 1 to clear bit */ @@ -270,14 +293,14 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t) /* "Values of 0h-3h are ignored and should not be attempted" */ if (tmrval < 0x04) return -EINVAL; - if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) || + if (((iTCO_wdt_private.iTCO_version >= 2) && (tmrval > 0x3ff)) || ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) return -EINVAL; iTCO_vendor_pre_set_heartbeat(tmrval); /* Write new heartbeat to watchdog */ - if (iTCO_wdt_private.iTCO_version == 2) { + if (iTCO_wdt_private.iTCO_version >= 2) { spin_lock(&iTCO_wdt_private.io_lock); val16 = inw(TCOv2_TMR); val16 &= 0xfc00; @@ -312,13 +335,13 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) unsigned int time_left = 0; /* read the TCO Timer */ - if (iTCO_wdt_private.iTCO_version == 2) { + if (iTCO_wdt_private.iTCO_version >= 2) { spin_lock(&iTCO_wdt_private.io_lock); val16 = inw(TCO_RLD); val16 &= 0x3ff; spin_unlock(&iTCO_wdt_private.io_lock); - time_left = (val16 * 6) / 10; + time_left = ticks_to_seconds(val16); } else if (iTCO_wdt_private.iTCO_version == 1) { spin_lock(&iTCO_wdt_private.io_lock); val8 = inb(TCO_RLD); @@ -327,7 +350,7 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) val8 += (inb(TCOv1_TMR) & 0x3f); spin_unlock(&iTCO_wdt_private.io_lock); - time_left = (val8 * 6) / 10; + time_left = ticks_to_seconds(val8); } return time_left; } @@ -376,16 +399,16 @@ static void iTCO_wdt_cleanup(void) resource_size(iTCO_wdt_private.tco_res)); release_region(iTCO_wdt_private.smi_res->start, resource_size(iTCO_wdt_private.smi_res)); - if (iTCO_wdt_private.iTCO_version == 2) { - iounmap(iTCO_wdt_private.gcs); - release_mem_region(iTCO_wdt_private.gcs_res->start, - resource_size(iTCO_wdt_private.gcs_res)); + if (iTCO_wdt_private.iTCO_version >= 2) { + iounmap(iTCO_wdt_private.gcs_pmc); + release_mem_region(iTCO_wdt_private.gcs_pmc_res->start, + resource_size(iTCO_wdt_private.gcs_pmc_res)); } iTCO_wdt_private.tco_res = NULL; iTCO_wdt_private.smi_res = NULL; - iTCO_wdt_private.gcs_res = NULL; - iTCO_wdt_private.gcs = NULL; + iTCO_wdt_private.gcs_pmc_res = NULL; + iTCO_wdt_private.gcs_pmc = NULL; } static int iTCO_wdt_probe(struct platform_device *dev) @@ -414,27 +437,27 @@ static int iTCO_wdt_probe(struct platform_device *dev) iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent); /* - * Get the Memory-Mapped GCS register, we need it for the - * NO_REBOOT flag (TCO v2). + * Get the Memory-Mapped GCS or PMC register, we need it for the + * NO_REBOOT flag (TCO v2 and v3). */ - if (iTCO_wdt_private.iTCO_version == 2) { - iTCO_wdt_private.gcs_res = platform_get_resource(dev, + if (iTCO_wdt_private.iTCO_version >= 2) { + iTCO_wdt_private.gcs_pmc_res = platform_get_resource(dev, IORESOURCE_MEM, - ICH_RES_MEM_GCS); + ICH_RES_MEM_GCS_PMC); - if (!iTCO_wdt_private.gcs_res) + if (!iTCO_wdt_private.gcs_pmc_res) goto out; - if (!request_mem_region(iTCO_wdt_private.gcs_res->start, - resource_size(iTCO_wdt_private.gcs_res), dev->name)) { + if (!request_mem_region(iTCO_wdt_private.gcs_pmc_res->start, + resource_size(iTCO_wdt_private.gcs_pmc_res), dev->name)) { ret = -EBUSY; goto out; } - iTCO_wdt_private.gcs = ioremap(iTCO_wdt_private.gcs_res->start, - resource_size(iTCO_wdt_private.gcs_res)); - if (!iTCO_wdt_private.gcs) { + iTCO_wdt_private.gcs_pmc = ioremap(iTCO_wdt_private.gcs_pmc_res->start, + resource_size(iTCO_wdt_private.gcs_pmc_res)); + if (!iTCO_wdt_private.gcs_pmc) { ret = -EIO; - goto unreg_gcs; + goto unreg_gcs_pmc; } } @@ -442,7 +465,7 @@ static int iTCO_wdt_probe(struct platform_device *dev) if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ - goto unmap_gcs; + goto unmap_gcs_pmc; } /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ @@ -454,7 +477,7 @@ static int iTCO_wdt_probe(struct platform_device *dev) pr_err("I/O address 0x%04llx already in use, device disabled\n", (u64)SMI_EN); ret = -EBUSY; - goto unmap_gcs; + goto unmap_gcs_pmc; } if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) { /* @@ -478,9 +501,13 @@ static int iTCO_wdt_probe(struct platform_device *dev) ich_info->name, ich_info->iTCO_version, (u64)TCOBASE); /* Clear out the (probably old) status */ - outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */ - outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */ - outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */ + if (iTCO_wdt_private.iTCO_version == 3) { + outl(0x20008, TCO1_STS); + } else { + outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */ + outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */ + } iTCO_wdt_watchdog_dev.bootstatus = 0; iTCO_wdt_watchdog_dev.timeout = WATCHDOG_TIMEOUT; @@ -515,18 +542,18 @@ unreg_tco: unreg_smi: release_region(iTCO_wdt_private.smi_res->start, resource_size(iTCO_wdt_private.smi_res)); -unmap_gcs: - if (iTCO_wdt_private.iTCO_version == 2) - iounmap(iTCO_wdt_private.gcs); -unreg_gcs: - if (iTCO_wdt_private.iTCO_version == 2) - release_mem_region(iTCO_wdt_private.gcs_res->start, - resource_size(iTCO_wdt_private.gcs_res)); +unmap_gcs_pmc: + if (iTCO_wdt_private.iTCO_version >= 2) + iounmap(iTCO_wdt_private.gcs_pmc); +unreg_gcs_pmc: + if (iTCO_wdt_private.iTCO_version >= 2) + release_mem_region(iTCO_wdt_private.gcs_pmc_res->start, + resource_size(iTCO_wdt_private.gcs_pmc_res)); out: iTCO_wdt_private.tco_res = NULL; iTCO_wdt_private.smi_res = NULL; - iTCO_wdt_private.gcs_res = NULL; - iTCO_wdt_private.gcs = NULL; + iTCO_wdt_private.gcs_pmc_res = NULL; + iTCO_wdt_private.gcs_pmc = NULL; return ret; } diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index ade1c06d4ceb..d2b16704624c 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -195,6 +195,18 @@ static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) { return twl_i2c_read(mod_no, val, reg, 1); } +static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) { + val = cpu_to_le16(val); + return twl_i2c_write(mod_no, (u8*) &val, reg, 2); +} + +static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) { + int ret; + ret = twl_i2c_read(mod_no, (u8*) val, reg, 2); + *val = le16_to_cpu(*val); + return ret; +} + int twl_get_type(void); int twl_get_version(void); int twl_get_hfclk_rate(void); diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h index 01f595107048..1c0134dd3271 100644 --- a/include/linux/i2c/twl4030-madc.h +++ b/include/linux/i2c/twl4030-madc.h @@ -44,7 +44,7 @@ struct twl4030_madc_conversion_method { struct twl4030_madc_request { unsigned long channels; - u16 do_avg; + bool do_avg; u16 method; u16 type; bool active; diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 3ddaa634b19d..7b35c21170d5 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -1034,6 +1034,27 @@ #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 #define ARIZONA_DSP1_STATUS_3 0x1106 +#define ARIZONA_DSP1_STATUS_4 0x1107 +#define ARIZONA_DSP1_WDMA_BUFFER_1 0x1110 +#define ARIZONA_DSP1_WDMA_BUFFER_2 0x1111 +#define ARIZONA_DSP1_WDMA_BUFFER_3 0x1112 +#define ARIZONA_DSP1_WDMA_BUFFER_4 0x1113 +#define ARIZONA_DSP1_WDMA_BUFFER_5 0x1114 +#define ARIZONA_DSP1_WDMA_BUFFER_6 0x1115 +#define ARIZONA_DSP1_WDMA_BUFFER_7 0x1116 +#define ARIZONA_DSP1_WDMA_BUFFER_8 0x1117 +#define ARIZONA_DSP1_RDMA_BUFFER_1 0x1120 +#define ARIZONA_DSP1_RDMA_BUFFER_2 0x1121 +#define ARIZONA_DSP1_RDMA_BUFFER_3 0x1122 +#define ARIZONA_DSP1_RDMA_BUFFER_4 0x1123 +#define ARIZONA_DSP1_RDMA_BUFFER_5 0x1124 +#define ARIZONA_DSP1_RDMA_BUFFER_6 0x1125 +#define ARIZONA_DSP1_WDMA_CONFIG_1 0x1130 +#define ARIZONA_DSP1_WDMA_CONFIG_2 0x1131 +#define ARIZONA_DSP1_WDMA_OFFSET_1 0x1132 +#define ARIZONA_DSP1_RDMA_CONFIG_1 0x1134 +#define ARIZONA_DSP1_RDMA_OFFSET_1 0x1135 +#define ARIZONA_DSP1_EXTERNAL_START_SELECT_1 0x1138 #define ARIZONA_DSP1_SCRATCH_0 0x1140 #define ARIZONA_DSP1_SCRATCH_1 0x1141 #define ARIZONA_DSP1_SCRATCH_2 0x1142 @@ -1043,6 +1064,27 @@ #define ARIZONA_DSP2_STATUS_1 0x1204 #define ARIZONA_DSP2_STATUS_2 0x1205 #define ARIZONA_DSP2_STATUS_3 0x1206 +#define ARIZONA_DSP2_STATUS_4 0x1207 +#define ARIZONA_DSP2_WDMA_BUFFER_1 0x1210 +#define ARIZONA_DSP2_WDMA_BUFFER_2 0x1211 +#define ARIZONA_DSP2_WDMA_BUFFER_3 0x1212 +#define ARIZONA_DSP2_WDMA_BUFFER_4 0x1213 +#define ARIZONA_DSP2_WDMA_BUFFER_5 0x1214 +#define ARIZONA_DSP2_WDMA_BUFFER_6 0x1215 +#define ARIZONA_DSP2_WDMA_BUFFER_7 0x1216 +#define ARIZONA_DSP2_WDMA_BUFFER_8 0x1217 +#define ARIZONA_DSP2_RDMA_BUFFER_1 0x1220 +#define ARIZONA_DSP2_RDMA_BUFFER_2 0x1221 +#define ARIZONA_DSP2_RDMA_BUFFER_3 0x1222 +#define ARIZONA_DSP2_RDMA_BUFFER_4 0x1223 +#define ARIZONA_DSP2_RDMA_BUFFER_5 0x1224 +#define ARIZONA_DSP2_RDMA_BUFFER_6 0x1225 +#define ARIZONA_DSP2_WDMA_CONFIG_1 0x1230 +#define ARIZONA_DSP2_WDMA_CONFIG_2 0x1231 +#define ARIZONA_DSP2_WDMA_OFFSET_1 0x1232 +#define ARIZONA_DSP2_RDMA_CONFIG_1 0x1234 +#define ARIZONA_DSP2_RDMA_OFFSET_1 0x1235 +#define ARIZONA_DSP2_EXTERNAL_START_SELECT_1 0x1238 #define ARIZONA_DSP2_SCRATCH_0 0x1240 #define ARIZONA_DSP2_SCRATCH_1 0x1241 #define ARIZONA_DSP2_SCRATCH_2 0x1242 @@ -1052,6 +1094,27 @@ #define ARIZONA_DSP3_STATUS_1 0x1304 #define ARIZONA_DSP3_STATUS_2 0x1305 #define ARIZONA_DSP3_STATUS_3 0x1306 +#define ARIZONA_DSP3_STATUS_4 0x1307 +#define ARIZONA_DSP3_WDMA_BUFFER_1 0x1310 +#define ARIZONA_DSP3_WDMA_BUFFER_2 0x1311 +#define ARIZONA_DSP3_WDMA_BUFFER_3 0x1312 +#define ARIZONA_DSP3_WDMA_BUFFER_4 0x1313 +#define ARIZONA_DSP3_WDMA_BUFFER_5 0x1314 +#define ARIZONA_DSP3_WDMA_BUFFER_6 0x1315 +#define ARIZONA_DSP3_WDMA_BUFFER_7 0x1316 +#define ARIZONA_DSP3_WDMA_BUFFER_8 0x1317 +#define ARIZONA_DSP3_RDMA_BUFFER_1 0x1320 +#define ARIZONA_DSP3_RDMA_BUFFER_2 0x1321 +#define ARIZONA_DSP3_RDMA_BUFFER_3 0x1322 +#define ARIZONA_DSP3_RDMA_BUFFER_4 0x1323 +#define ARIZONA_DSP3_RDMA_BUFFER_5 0x1324 +#define ARIZONA_DSP3_RDMA_BUFFER_6 0x1325 +#define ARIZONA_DSP3_WDMA_CONFIG_1 0x1330 +#define ARIZONA_DSP3_WDMA_CONFIG_2 0x1331 +#define ARIZONA_DSP3_WDMA_OFFSET_1 0x1332 +#define ARIZONA_DSP3_RDMA_CONFIG_1 0x1334 +#define ARIZONA_DSP3_RDMA_OFFSET_1 0x1335 +#define ARIZONA_DSP3_EXTERNAL_START_SELECT_1 0x1338 #define ARIZONA_DSP3_SCRATCH_0 0x1340 #define ARIZONA_DSP3_SCRATCH_1 0x1341 #define ARIZONA_DSP3_SCRATCH_2 0x1342 @@ -1061,6 +1124,27 @@ #define ARIZONA_DSP4_STATUS_1 0x1404 #define ARIZONA_DSP4_STATUS_2 0x1405 #define ARIZONA_DSP4_STATUS_3 0x1406 +#define ARIZONA_DSP4_STATUS_4 0x1407 +#define ARIZONA_DSP4_WDMA_BUFFER_1 0x1410 +#define ARIZONA_DSP4_WDMA_BUFFER_2 0x1411 +#define ARIZONA_DSP4_WDMA_BUFFER_3 0x1412 +#define ARIZONA_DSP4_WDMA_BUFFER_4 0x1413 +#define ARIZONA_DSP4_WDMA_BUFFER_5 0x1414 +#define ARIZONA_DSP4_WDMA_BUFFER_6 0x1415 +#define ARIZONA_DSP4_WDMA_BUFFER_7 0x1416 +#define ARIZONA_DSP4_WDMA_BUFFER_8 0x1417 +#define ARIZONA_DSP4_RDMA_BUFFER_1 0x1420 +#define ARIZONA_DSP4_RDMA_BUFFER_2 0x1421 +#define ARIZONA_DSP4_RDMA_BUFFER_3 0x1422 +#define ARIZONA_DSP4_RDMA_BUFFER_4 0x1423 +#define ARIZONA_DSP4_RDMA_BUFFER_5 0x1424 +#define ARIZONA_DSP4_RDMA_BUFFER_6 0x1425 +#define ARIZONA_DSP4_WDMA_CONFIG_1 0x1430 +#define ARIZONA_DSP4_WDMA_CONFIG_2 0x1431 +#define ARIZONA_DSP4_WDMA_OFFSET_1 0x1432 +#define ARIZONA_DSP4_RDMA_CONFIG_1 0x1434 +#define ARIZONA_DSP4_RDMA_OFFSET_1 0x1435 +#define ARIZONA_DSP4_EXTERNAL_START_SELECT_1 0x1438 #define ARIZONA_DSP4_SCRATCH_0 0x1440 #define ARIZONA_DSP4_SCRATCH_1 0x1441 #define ARIZONA_DSP4_SCRATCH_2 0x1442 diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h new file mode 100644 index 000000000000..434df2d4e587 --- /dev/null +++ b/include/linux/mfd/bcm590xx.h @@ -0,0 +1,31 @@ +/* + * Broadcom BCM590xx PMU + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter <mporter@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_BCM590XX_H +#define __LINUX_MFD_BCM590XX_H + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +/* max register address */ +#define BCM590XX_MAX_REGISTER 0xe7 + +struct bcm590xx { + struct device *dev; + struct i2c_client *i2c_client; + struct regmap *regmap; + unsigned int id; +}; + +#endif /* __LINUX_MFD_BCM590XX_H */ diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 21e21b81cc75..bba65f51a0b5 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -83,6 +83,7 @@ enum da9052_chip_id { DA9053_AA, DA9053_BA, DA9053_BB, + DA9053_BC, }; struct da9052_pdata; diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h index 2d2a0af675fd..00a9aac5d1e8 100644 --- a/include/linux/mfd/da9063/core.h +++ b/include/linux/mfd/da9063/core.h @@ -33,6 +33,10 @@ enum da9063_models { PMIC_DA9063 = 0x61, }; +enum da9063_variant_codes { + PMIC_DA9063_BB = 0x5 +}; + /* Interrupts */ enum da9063_irqs { DA9063_IRQ_ONKEY = 0, @@ -72,7 +76,7 @@ struct da9063 { /* Device */ struct device *dev; unsigned short model; - unsigned short revision; + unsigned char variant_code; unsigned int flags; /* Control interface */ diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index 5834813fb5f3..09a85c699da1 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -17,11 +17,7 @@ #define _DA9063_REG_H #define DA9063_I2C_PAGE_SEL_SHIFT 1 - #define DA9063_EVENT_REG_NUM 4 -#define DA9210_EVENT_REG_NUM 2 -#define DA9063_EXT_EVENT_REG_NUM (DA9063_EVENT_REG_NUM + \ - DA9210_EVENT_REG_NUM) /* Page selection I2C or SPI always in the begining of any page. */ /* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */ @@ -61,9 +57,9 @@ #define DA9063_REG_GPIO_10_11 0x1A #define DA9063_REG_GPIO_12_13 0x1B #define DA9063_REG_GPIO_14_15 0x1C -#define DA9063_REG_GPIO_MODE_0_7 0x1D -#define DA9063_REG_GPIO_MODE_8_15 0x1E -#define DA9063_REG_GPIO_SWITCH_CONT 0x1F +#define DA9063_REG_GPIO_MODE0_7 0x1D +#define DA9063_REG_GPIO_MODE8_15 0x1E +#define DA9063_REG_SWITCH_CONT 0x1F /* Regulator Control Registers */ #define DA9063_REG_BCORE2_CONT 0x20 @@ -83,7 +79,7 @@ #define DA9063_REG_LDO9_CONT 0x2E #define DA9063_REG_LDO10_CONT 0x2F #define DA9063_REG_LDO11_CONT 0x30 -#define DA9063_REG_VIB 0x31 +#define DA9063_REG_SUPPLIES 0x31 #define DA9063_REG_DVC_1 0x32 #define DA9063_REG_DVC_2 0x33 @@ -97,9 +93,9 @@ #define DA9063_REG_ADCIN1_RES 0x3A #define DA9063_REG_ADCIN2_RES 0x3B #define DA9063_REG_ADCIN3_RES 0x3C -#define DA9063_REG_MON1_RES 0x3D -#define DA9063_REG_MON2_RES 0x3E -#define DA9063_REG_MON3_RES 0x3F +#define DA9063_REG_MON_A8_RES 0x3D +#define DA9063_REG_MON_A9_RES 0x3E +#define DA9063_REG_MON_A10_RES 0x3F /* RTC Calendar and Alarm Registers */ #define DA9063_REG_COUNT_S 0x40 @@ -108,15 +104,16 @@ #define DA9063_REG_COUNT_D 0x43 #define DA9063_REG_COUNT_MO 0x44 #define DA9063_REG_COUNT_Y 0x45 -#define DA9063_REG_ALARM_MI 0x46 -#define DA9063_REG_ALARM_H 0x47 -#define DA9063_REG_ALARM_D 0x48 -#define DA9063_REG_ALARM_MO 0x49 -#define DA9063_REG_ALARM_Y 0x4A -#define DA9063_REG_SECOND_A 0x4B -#define DA9063_REG_SECOND_B 0x4C -#define DA9063_REG_SECOND_C 0x4D -#define DA9063_REG_SECOND_D 0x4E +#define DA9063_REG_ALARM_S 0x46 +#define DA9063_REG_ALARM_MI 0x47 +#define DA9063_REG_ALARM_H 0x48 +#define DA9063_REG_ALARM_D 0x49 +#define DA9063_REG_ALARM_MO 0x4A +#define DA9063_REG_ALARM_Y 0x4B +#define DA9063_REG_SECOND_A 0x4C +#define DA9063_REG_SECOND_B 0x4D +#define DA9063_REG_SECOND_C 0x4E +#define DA9063_REG_SECOND_D 0x4F /* Sequencer Control Registers */ #define DA9063_REG_SEQ 0x81 @@ -226,35 +223,37 @@ #define DA9063_REG_CONFIG_J 0x10F #define DA9063_REG_CONFIG_K 0x110 #define DA9063_REG_CONFIG_L 0x111 -#define DA9063_REG_MON_REG_1 0x112 -#define DA9063_REG_MON_REG_2 0x113 -#define DA9063_REG_MON_REG_3 0x114 -#define DA9063_REG_MON_REG_4 0x115 -#define DA9063_REG_MON_REG_5 0x116 -#define DA9063_REG_MON_REG_6 0x117 -#define DA9063_REG_TRIM_CLDR 0x118 - +#define DA9063_REG_CONFIG_M 0x112 +#define DA9063_REG_CONFIG_N 0x113 + +#define DA9063_REG_MON_REG_1 0x114 +#define DA9063_REG_MON_REG_2 0x115 +#define DA9063_REG_MON_REG_3 0x116 +#define DA9063_REG_MON_REG_4 0x117 +#define DA9063_REG_MON_REG_5 0x11E +#define DA9063_REG_MON_REG_6 0x11F +#define DA9063_REG_TRIM_CLDR 0x120 /* General Purpose Registers */ -#define DA9063_REG_GP_ID_0 0x119 -#define DA9063_REG_GP_ID_1 0x11A -#define DA9063_REG_GP_ID_2 0x11B -#define DA9063_REG_GP_ID_3 0x11C -#define DA9063_REG_GP_ID_4 0x11D -#define DA9063_REG_GP_ID_5 0x11E -#define DA9063_REG_GP_ID_6 0x11F -#define DA9063_REG_GP_ID_7 0x120 -#define DA9063_REG_GP_ID_8 0x121 -#define DA9063_REG_GP_ID_9 0x122 -#define DA9063_REG_GP_ID_10 0x123 -#define DA9063_REG_GP_ID_11 0x124 -#define DA9063_REG_GP_ID_12 0x125 -#define DA9063_REG_GP_ID_13 0x126 -#define DA9063_REG_GP_ID_14 0x127 -#define DA9063_REG_GP_ID_15 0x128 -#define DA9063_REG_GP_ID_16 0x129 -#define DA9063_REG_GP_ID_17 0x12A -#define DA9063_REG_GP_ID_18 0x12B -#define DA9063_REG_GP_ID_19 0x12C +#define DA9063_REG_GP_ID_0 0x121 +#define DA9063_REG_GP_ID_1 0x122 +#define DA9063_REG_GP_ID_2 0x123 +#define DA9063_REG_GP_ID_3 0x124 +#define DA9063_REG_GP_ID_4 0x125 +#define DA9063_REG_GP_ID_5 0x126 +#define DA9063_REG_GP_ID_6 0x127 +#define DA9063_REG_GP_ID_7 0x128 +#define DA9063_REG_GP_ID_8 0x129 +#define DA9063_REG_GP_ID_9 0x12A +#define DA9063_REG_GP_ID_10 0x12B +#define DA9063_REG_GP_ID_11 0x12C +#define DA9063_REG_GP_ID_12 0x12D +#define DA9063_REG_GP_ID_13 0x12E +#define DA9063_REG_GP_ID_14 0x12F +#define DA9063_REG_GP_ID_15 0x130 +#define DA9063_REG_GP_ID_16 0x131 +#define DA9063_REG_GP_ID_17 0x132 +#define DA9063_REG_GP_ID_18 0x133 +#define DA9063_REG_GP_ID_19 0x134 /* Chip ID and variant */ #define DA9063_REG_CHIP_ID 0x181 @@ -405,8 +404,10 @@ /* DA9063_REG_CONTROL_B (addr=0x0F) */ #define DA9063_CHG_SEL 0x01 #define DA9063_WATCHDOG_PD 0x02 +#define DA9063_RESET_BLINKING 0x04 #define DA9063_NRES_MODE 0x08 #define DA9063_NONKEY_LOCK 0x10 +#define DA9063_BUCK_SLOWSTART 0x80 /* DA9063_REG_CONTROL_C (addr=0x10) */ #define DA9063_DEBOUNCING_MASK 0x07 @@ -466,6 +467,7 @@ #define DA9063_GPADC_PAUSE 0x02 #define DA9063_PMIF_DIS 0x04 #define DA9063_HS2WIRE_DIS 0x08 +#define DA9063_CLDR_PAUSE 0x10 #define DA9063_BBAT_DIS 0x20 #define DA9063_OUT_32K_PAUSE 0x40 #define DA9063_PMCONT_DIS 0x80 @@ -660,7 +662,7 @@ #define DA9063_GPIO15_TYPE_GPO 0x04 #define DA9063_GPIO15_NO_WAKEUP 0x80 -/* DA9063_REG_GPIO_MODE_0_7 (addr=0x1D) */ +/* DA9063_REG_GPIO_MODE0_7 (addr=0x1D) */ #define DA9063_GPIO0_MODE 0x01 #define DA9063_GPIO1_MODE 0x02 #define DA9063_GPIO2_MODE 0x04 @@ -670,7 +672,7 @@ #define DA9063_GPIO6_MODE 0x40 #define DA9063_GPIO7_MODE 0x80 -/* DA9063_REG_GPIO_MODE_8_15 (addr=0x1E) */ +/* DA9063_REG_GPIO_MODE8_15 (addr=0x1E) */ #define DA9063_GPIO8_MODE 0x01 #define DA9063_GPIO9_MODE 0x02 #define DA9063_GPIO10_MODE 0x04 @@ -702,12 +704,12 @@ #define DA9063_SWITCH_SR_5MV 0x10 #define DA9063_SWITCH_SR_10MV 0x20 #define DA9063_SWITCH_SR_50MV 0x30 -#define DA9063_SWITCH_SR_DIS 0x40 +#define DA9063_CORE_SW_INTERNAL 0x40 #define DA9063_CP_EN_MODE 0x80 /* DA9063_REGL_Bxxxx_CONT common bits (addr=0x20-0x25) */ #define DA9063_BUCK_EN 0x01 -#define DA9063_BUCK_GPI_MASK 0x06 +#define DA9063_BUCK_GPI_MASK 0x06 #define DA9063_BUCK_GPI_OFF 0x00 #define DA9063_BUCK_GPI_GPIO1 0x02 #define DA9063_BUCK_GPI_GPIO2 0x04 @@ -841,25 +843,27 @@ #define DA9063_COUNT_YEAR_MASK 0x3F #define DA9063_MONITOR 0x40 -/* DA9063_REG_ALARM_MI (addr=0x46) */ +/* DA9063_REG_ALARM_S (addr=0x46) */ +#define DA9063_ALARM_S_MASK 0x3F #define DA9063_ALARM_STATUS_ALARM 0x80 #define DA9063_ALARM_STATUS_TICK 0x40 +/* DA9063_REG_ALARM_MI (addr=0x47) */ #define DA9063_ALARM_MIN_MASK 0x3F -/* DA9063_REG_ALARM_H (addr=0x47) */ +/* DA9063_REG_ALARM_H (addr=0x48) */ #define DA9063_ALARM_HOUR_MASK 0x1F -/* DA9063_REG_ALARM_D (addr=0x48) */ +/* DA9063_REG_ALARM_D (addr=0x49) */ #define DA9063_ALARM_DAY_MASK 0x1F -/* DA9063_REG_ALARM_MO (addr=0x49) */ +/* DA9063_REG_ALARM_MO (addr=0x4A) */ #define DA9063_TICK_WAKE 0x20 #define DA9063_TICK_TYPE 0x10 #define DA9063_TICK_TYPE_SEC 0x00 #define DA9063_TICK_TYPE_MIN 0x10 #define DA9063_ALARM_MONTH_MASK 0x0F -/* DA9063_REG_ALARM_Y (addr=0x4A) */ +/* DA9063_REG_ALARM_Y (addr=0x4B) */ #define DA9063_TICK_ON 0x80 #define DA9063_ALARM_ON 0x40 #define DA9063_ALARM_YEAR_MASK 0x3F @@ -906,7 +910,7 @@ /* DA9063_REG_Bxxxx_CFG common bits (addr=0x9D-0xA2) */ #define DA9063_BUCK_FB_MASK 0x07 -#define DA9063_BUCK_PD_DIS_SHIFT 5 +#define DA9063_BUCK_PD_DIS_MASK 0x20 #define DA9063_BUCK_MODE_MASK 0xC0 #define DA9063_BUCK_MODE_MANUAL 0x00 #define DA9063_BUCK_MODE_SLEEP 0x40 diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h index 3e1df644c407..8feac782fa83 100644 --- a/include/linux/mfd/lpc_ich.h +++ b/include/linux/mfd/lpc_ich.h @@ -21,23 +21,26 @@ #define LPC_ICH_H /* Watchdog resources */ -#define ICH_RES_IO_TCO 0 -#define ICH_RES_IO_SMI 1 -#define ICH_RES_MEM_OFF 2 -#define ICH_RES_MEM_GCS 0 +#define ICH_RES_IO_TCO 0 +#define ICH_RES_IO_SMI 1 +#define ICH_RES_MEM_OFF 2 +#define ICH_RES_MEM_GCS_PMC 0 /* GPIO resources */ #define ICH_RES_GPIO 0 #define ICH_RES_GPE0 1 /* GPIO compatibility */ -#define ICH_I3100_GPIO 0x401 -#define ICH_V5_GPIO 0x501 -#define ICH_V6_GPIO 0x601 -#define ICH_V7_GPIO 0x701 -#define ICH_V9_GPIO 0x801 -#define ICH_V10CORP_GPIO 0xa01 -#define ICH_V10CONS_GPIO 0xa11 +enum { + ICH_I3100_GPIO, + ICH_V5_GPIO, + ICH_V6_GPIO, + ICH_V7_GPIO, + ICH_V9_GPIO, + ICH_V10CORP_GPIO, + ICH_V10CONS_GPIO, + AVOTON_GPIO, +}; struct lpc_ich_info { char name[32]; diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h index a3d0185196d3..c9b332fb0d5d 100644 --- a/include/linux/mfd/max14577-private.h +++ b/include/linux/mfd/max14577-private.h @@ -248,14 +248,6 @@ enum max14577_charger_reg { /* MAX14577 regulator SFOUT LDO voltage, fixed, uV */ #define MAX14577_REGULATOR_SAFEOUT_VOLTAGE 4900000 -enum max14577_irq_source { - MAX14577_IRQ_INT1 = 0, - MAX14577_IRQ_INT2, - MAX14577_IRQ_INT3, - - MAX14577_IRQ_REGS_NUM, -}; - enum max14577_irq { /* INT1 */ MAX14577_IRQ_INT1_ADC, diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h index 247b021dfaaf..736d39c3ec0d 100644 --- a/include/linux/mfd/max14577.h +++ b/include/linux/mfd/max14577.h @@ -25,13 +25,8 @@ #ifndef __MAX14577_H__ #define __MAX14577_H__ -#include <linux/mfd/max14577-private.h> #include <linux/regulator/consumer.h> -/* - * MAX14577 Regulator - */ - /* MAX14577 regulator IDs */ enum max14577_regulators { MAX14577_SAFEOUT = 0, diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h deleted file mode 100644 index f83d6b43ecbb..000000000000 --- a/include/linux/mfd/pm8xxx/irq.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * Qualcomm PMIC irq 8xxx driver header file - * - */ - -#ifndef __MFD_PM8XXX_IRQ_H -#define __MFD_PM8XXX_IRQ_H - -#include <linux/errno.h> -#include <linux/err.h> - -struct pm8xxx_irq_core_data { - u32 rev; - int nirqs; -}; - -struct pm8xxx_irq_platform_data { - int irq_base; - struct pm8xxx_irq_core_data irq_cdata; - int devirq; - int irq_trigger_flag; -}; - -struct pm_irq_chip; - -#ifdef CONFIG_MFD_PM8XXX_IRQ -int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq); -struct pm_irq_chip *pm8xxx_irq_init(struct device *dev, - const struct pm8xxx_irq_platform_data *pdata); -int pm8xxx_irq_exit(struct pm_irq_chip *chip); -#else -static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) -{ - return -ENXIO; -} -static inline struct pm_irq_chip *pm8xxx_irq_init( - const struct device *dev, - const struct pm8xxx_irq_platform_data *pdata) -{ - return ERR_PTR(-ENXIO); -} -static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip) -{ - return -ENXIO; -} -#endif /* CONFIG_MFD_PM8XXX_IRQ */ -#endif /* __MFD_PM8XXX_IRQ_H */ diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h deleted file mode 100644 index 00fa3de7659d..000000000000 --- a/include/linux/mfd/pm8xxx/pm8921.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * Qualcomm PMIC 8921 driver header file - * - */ - -#ifndef __MFD_PM8921_H -#define __MFD_PM8921_H - -#include <linux/mfd/pm8xxx/irq.h> - -#define PM8921_NR_IRQS 256 - -struct pm8921_platform_data { - int irq_base; - struct pm8xxx_irq_platform_data *irq_pdata; -}; - -#endif diff --git a/include/linux/mfd/rtsx_usb.h b/include/linux/mfd/rtsx_usb.h new file mode 100644 index 000000000000..c446e4fd6b5c --- /dev/null +++ b/include/linux/mfd/rtsx_usb.h @@ -0,0 +1,628 @@ +/* Driver for Realtek RTS5139 USB card reader + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Roger Tseng <rogerable@realtek.com> + */ + +#ifndef __RTSX_USB_H +#define __RTSX_USB_H + +#include <linux/usb.h> + +/* related module names */ +#define RTSX_USB_SD_CARD 0 +#define RTSX_USB_MS_CARD 1 + +/* endpoint numbers */ +#define EP_BULK_OUT 1 +#define EP_BULK_IN 2 +#define EP_INTR_IN 3 + +/* USB vendor requests */ +#define RTSX_USB_REQ_REG_OP 0x00 +#define RTSX_USB_REQ_POLL 0x02 + +/* miscellaneous parameters */ +#define MIN_DIV_N 60 +#define MAX_DIV_N 120 + +#define MAX_PHASE 15 +#define RX_TUNING_CNT 3 + +#define QFN24 0 +#define LQFP48 1 +#define CHECK_PKG(ucr, pkg) ((ucr)->package == (pkg)) + +/* data structures */ +struct rtsx_ucr { + u16 vendor_id; + u16 product_id; + + int package; + u8 ic_version; + bool is_rts5179; + + unsigned int cur_clk; + + u8 *cmd_buf; + unsigned int cmd_idx; + u8 *rsp_buf; + + struct usb_device *pusb_dev; + struct usb_interface *pusb_intf; + struct usb_sg_request current_sg; + unsigned char *iobuf; + dma_addr_t iobuf_dma; + + struct timer_list sg_timer; + struct mutex dev_mutex; +}; + +/* buffer size */ +#define IOBUF_SIZE 1024 + +/* prototypes of exported functions */ +extern int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status); + +extern int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data); +extern int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, + u8 data); + +extern int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, + u8 data); +extern int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, + u8 *data); + +extern void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, + u16 reg_addr, u8 mask, u8 data); +extern int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout); +extern int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout); +extern int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe, + void *buf, unsigned int len, int use_sg, + unsigned int *act_len, int timeout); + +extern int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len); +extern int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len); +extern int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +extern int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card); + +/* card status */ +#define SD_CD 0x01 +#define MS_CD 0x02 +#define XD_CD 0x04 +#define CD_MASK (SD_CD | MS_CD | XD_CD) +#define SD_WP 0x08 + +/* reader command field offset & parameters */ +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +#define PACKET_TYPE 4 +#define CNT_H 5 +#define CNT_L 6 +#define STAGE_FLAG 7 +#define CMD_OFFSET 8 +#define SEQ_WRITE_DATA_OFFSET 12 + +#define BATCH_CMD 0 +#define SEQ_READ 1 +#define SEQ_WRITE 2 + +#define STAGE_R 0x01 +#define STAGE_DI 0x02 +#define STAGE_DO 0x04 +#define STAGE_MS_STATUS 0x08 +#define STAGE_XD_STATUS 0x10 +#define MODE_C 0x00 +#define MODE_CR (STAGE_R) +#define MODE_CDIR (STAGE_R | STAGE_DI) +#define MODE_CDOR (STAGE_R | STAGE_DO) + +#define EP0_OP_SHIFT 14 +#define EP0_READ_REG_CMD 2 +#define EP0_WRITE_REG_CMD 3 + +#define rtsx_usb_cmd_hdr_tag(ucr) \ + do { \ + ucr->cmd_buf[0] = 'R'; \ + ucr->cmd_buf[1] = 'T'; \ + ucr->cmd_buf[2] = 'C'; \ + ucr->cmd_buf[3] = 'R'; \ + } while (0) + +static inline void rtsx_usb_init_cmd(struct rtsx_ucr *ucr) +{ + rtsx_usb_cmd_hdr_tag(ucr); + ucr->cmd_idx = 0; + ucr->cmd_buf[PACKET_TYPE] = BATCH_CMD; +} + +/* internal register address */ +#define FPDCTL 0xFC00 +#define SSC_DIV_N_0 0xFC07 +#define SSC_CTL1 0xFC09 +#define SSC_CTL2 0xFC0A +#define CFG_MODE 0xFC0E +#define CFG_MODE_1 0xFC0F +#define RCCTL 0xFC14 +#define SOF_WDOG 0xFC28 +#define SYS_DUMMY0 0xFC30 + +#define MS_BLKEND 0xFD30 +#define MS_READ_START 0xFD31 +#define MS_READ_COUNT 0xFD32 +#define MS_WRITE_START 0xFD33 +#define MS_WRITE_COUNT 0xFD34 +#define MS_COMMAND 0xFD35 +#define MS_OLD_BLOCK_0 0xFD36 +#define MS_OLD_BLOCK_1 0xFD37 +#define MS_NEW_BLOCK_0 0xFD38 +#define MS_NEW_BLOCK_1 0xFD39 +#define MS_LOG_BLOCK_0 0xFD3A +#define MS_LOG_BLOCK_1 0xFD3B +#define MS_BUS_WIDTH 0xFD3C +#define MS_PAGE_START 0xFD3D +#define MS_PAGE_LENGTH 0xFD3E +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define CARD_DMA1_CTL 0xFD5C +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 +#define CARD_EXIST 0xFD6F +#define CARD_INT_PEND 0xFD71 + +#define LDO_POWER_CFG 0xFD7B + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D + +#define CARD_DMA1_CTL 0xFD5C + +#define HW_VERSION 0xFC01 + +#define SSC_CLK_FPGA_SEL 0xFC02 +#define CLK_DIV 0xFC03 +#define SFSM_ED 0xFC04 + +#define CD_DEGLITCH_WIDTH 0xFC20 +#define CD_DEGLITCH_EN 0xFC21 +#define AUTO_DELINK_EN 0xFC23 + +#define FPGA_PULL_CTL 0xFC1D +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_SHARE_MODE 0xFD51 +#define CARD_DRIVE_SEL 0xFD52 +#define CARD_STOP 0xFD53 +#define CARD_OE 0xFD54 +#define CARD_AUTO_BLINK 0xFD55 +#define CARD_GPIO 0xFD56 +#define SD30_DRIVE_SEL 0xFD57 + +#define CARD_DATA_SOURCE 0xFD5D +#define CARD_SELECT 0xFD5E + +#define CARD_CLK_EN 0xFD79 +#define CARD_PWR_CTL 0xFD7A + +#define OCPCTL 0xFD80 +#define OCPPARA1 0xFD81 +#define OCPPARA2 0xFD82 +#define OCPSTAT 0xFD83 + +#define HS_USB_STAT 0xFE01 +#define HS_VCONTROL 0xFE26 +#define HS_VSTAIN 0xFE27 +#define HS_VLOADM 0xFE28 +#define HS_VSTAOUT 0xFE29 + +#define MC_IRQ 0xFF00 +#define MC_IRQEN 0xFF01 +#define MC_FIFO_CTL 0xFF02 +#define MC_FIFO_BC0 0xFF03 +#define MC_FIFO_BC1 0xFF04 +#define MC_FIFO_STAT 0xFF05 +#define MC_FIFO_MODE 0xFF06 +#define MC_FIFO_RD_PTR0 0xFF07 +#define MC_FIFO_RD_PTR1 0xFF08 +#define MC_DMA_CTL 0xFF10 +#define MC_DMA_TC0 0xFF11 +#define MC_DMA_TC1 0xFF12 +#define MC_DMA_TC2 0xFF13 +#define MC_DMA_TC3 0xFF14 +#define MC_DMA_RST 0xFF15 + +#define RBUF_SIZE_MASK 0xFBFF +#define RBUF_BASE 0xF000 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 + +/* internal register value macros */ +#define POWER_OFF 0x03 +#define PARTIAL_POWER_ON 0x02 +#define POWER_ON 0x00 +#define POWER_MASK 0x03 +#define LDO3318_PWR_MASK 0x0C +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x08 +#define LDO_OFF 0x0C +#define DV3318_AUTO_PWR_OFF 0x10 +#define FORCE_LDO_POWERB 0x60 + +/* LDO_POWER_CFG */ +#define TUNE_SD18_MASK 0x1C +#define TUNE_SD18_1V7 0x00 +#define TUNE_SD18_1V8 (0x01 << 2) +#define TUNE_SD18_1V9 (0x02 << 2) +#define TUNE_SD18_2V0 (0x03 << 2) +#define TUNE_SD18_2V7 (0x04 << 2) +#define TUNE_SD18_2V8 (0x05 << 2) +#define TUNE_SD18_2V9 (0x06 << 2) +#define TUNE_SD18_3V3 (0x07 << 2) + +/* CLK_DIV */ +#define CLK_CHANGE 0x80 +#define CLK_DIV_1 0x00 +#define CLK_DIV_2 0x01 +#define CLK_DIV_4 0x02 +#define CLK_DIV_8 0x03 + +#define SSC_POWER_MASK 0x01 +#define SSC_POWER_DOWN 0x01 +#define SSC_POWER_ON 0x00 + +#define FPGA_VER 0x80 +#define HW_VER_MASK 0x0F + +#define EXTEND_DMA1_ASYNC_SIGNAL 0x02 + +/* CFG_MODE*/ +#define XTAL_FREE 0x80 +#define CLK_MODE_MASK 0x03 +#define CLK_MODE_12M_XTAL 0x00 +#define CLK_MODE_NON_XTAL 0x01 +#define CLK_MODE_24M_OSC 0x02 +#define CLK_MODE_48M_OSC 0x03 + +/* CFG_MODE_1*/ +#define RTS5179 0x02 + +#define NYET_EN 0x01 +#define NYET_MSAK 0x01 + +#define SD30_DRIVE_MASK 0x07 +#define SD20_DRIVE_MASK 0x03 + +#define DISABLE_SD_CD 0x08 +#define DISABLE_MS_CD 0x10 +#define DISABLE_XD_CD 0x20 +#define SD_CD_DEGLITCH_EN 0x01 +#define MS_CD_DEGLITCH_EN 0x02 +#define XD_CD_DEGLITCH_EN 0x04 + +#define CARD_SHARE_LQFP48 0x04 +#define CARD_SHARE_QFN24 0x00 +#define CARD_SHARE_LQFP_SEL 0x04 +#define CARD_SHARE_XD 0x00 +#define CARD_SHARE_SD 0x01 +#define CARD_SHARE_MS 0x02 +#define CARD_SHARE_MASK 0x03 + + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* CARD_CLK_EN */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* CARD_SELECT */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_LQFP48 0x04 +#define CARD_SHARE_QFN24 0x00 +#define CARD_SHARE_LQFP_SEL 0x04 +#define CARD_SHARE_XD 0x00 +#define CARD_SHARE_SD 0x01 +#define CARD_SHARE_MS 0x02 +#define CARD_SHARE_MASK 0x03 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x03 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_2M 0x01 +#define SSC_DEPTH_1M 0x02 +#define SSC_DEPTH_512K 0x03 + +/* SD_VPCLK0_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_CFG1 */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_CLK_DIVIDE_MASK 0xC0 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +/* SD_CFG2 */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_WAIT_CRC_TO_EN 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* CARD_DATA_SOURCE */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* CARD_OE */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_STOP */ +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C +#define MS_TM_SET_CMD 0x06 +#define MS_TM_COPY_PAGE 0x07 +#define MS_TM_MULTI_READ 0x02 +#define MS_TM_MULTI_WRITE 0x03 + +/* MC_FIFO_CTL */ +#define FIFO_FLUSH 0x01 + +/* MC_DMA_RST */ +#define DMA_RESET 0x01 + +/* MC_DMA_CTL */ +#define DMA_TC_EQ_0 0x80 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 2) +#define DMA_256 (1 << 2) +#define DMA_512 (2 << 2) +#define DMA_1024 (3 << 2) +#define DMA_PACK_SIZE_MASK 0x0C + +/* CARD_INT_PEND */ +#define XD_INT 0x10 +#define MS_INT 0x08 +#define SD_INT 0x04 + +/* LED operations*/ +static inline int rtsx_usb_turn_on_led(struct rtsx_ucr *ucr) +{ + return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x02); +} + +static inline int rtsx_usb_turn_off_led(struct rtsx_ucr *ucr) +{ + return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x03); +} + +/* HW error clearing */ +static inline void rtsx_usb_clear_fsm_err(struct rtsx_ucr *ucr) +{ + rtsx_usb_ep0_write_register(ucr, SFSM_ED, 0xf8, 0xf8); +} + +static inline void rtsx_usb_clear_dma_err(struct rtsx_ucr *ucr) +{ + rtsx_usb_ep0_write_register(ucr, MC_FIFO_CTL, + FIFO_FLUSH, FIFO_FLUSH); + rtsx_usb_ep0_write_register(ucr, MC_DMA_RST, DMA_RESET, DMA_RESET); +} +#endif /* __RTS51139_H */ diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h new file mode 100644 index 000000000000..d2e357df5a0e --- /dev/null +++ b/include/linux/mfd/tps65218.h @@ -0,0 +1,284 @@ +/* + * linux/mfd/tps65218.h + * + * Functions to access TPS65219 power management chip. + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#ifndef __LINUX_MFD_TPS65218_H +#define __LINUX_MFD_TPS65218_H + +#include <linux/i2c.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/bitops.h> + +/* TPS chip id list */ +#define TPS65218 0xF0 + +/* I2C ID for TPS65218 part */ +#define TPS65218_I2C_ID 0x24 + +/* All register addresses */ +#define TPS65218_REG_CHIPID 0x00 +#define TPS65218_REG_INT1 0x01 +#define TPS65218_REG_INT2 0x02 +#define TPS65218_REG_INT_MASK1 0x03 +#define TPS65218_REG_INT_MASK2 0x04 +#define TPS65218_REG_STATUS 0x05 +#define TPS65218_REG_CONTROL 0x06 +#define TPS65218_REG_FLAG 0x07 + +#define TPS65218_REG_PASSWORD 0x10 +#define TPS65218_REG_ENABLE1 0x11 +#define TPS65218_REG_ENABLE2 0x12 +#define TPS65218_REG_CONFIG1 0x13 +#define TPS65218_REG_CONFIG2 0x14 +#define TPS65218_REG_CONFIG3 0x15 +#define TPS65218_REG_CONTROL_DCDC1 0x16 +#define TPS65218_REG_CONTROL_DCDC2 0x17 +#define TPS65218_REG_CONTROL_DCDC3 0x18 +#define TPS65218_REG_CONTROL_DCDC4 0x19 +#define TPS65218_REG_CONTRL_SLEW_RATE 0x1A +#define TPS65218_REG_CONTROL_LDO1 0x1B +#define TPS65218_REG_SEQ1 0x20 +#define TPS65218_REG_SEQ2 0x21 +#define TPS65218_REG_SEQ3 0x22 +#define TPS65218_REG_SEQ4 0x23 +#define TPS65218_REG_SEQ5 0x24 +#define TPS65218_REG_SEQ6 0x25 +#define TPS65218_REG_SEQ7 0x26 + +/* Register field definitions */ +#define TPS65218_CHIPID_CHIP_MASK 0xF8 +#define TPS65218_CHIPID_REV_MASK 0x07 + +#define TPS65218_INT1_VPRG BIT(5) +#define TPS65218_INT1_AC BIT(4) +#define TPS65218_INT1_PB BIT(3) +#define TPS65218_INT1_HOT BIT(2) +#define TPS65218_INT1_CC_AQC BIT(1) +#define TPS65218_INT1_PRGC BIT(0) + +#define TPS65218_INT2_LS3_F BIT(5) +#define TPS65218_INT2_LS2_F BIT(4) +#define TPS65218_INT2_LS1_F BIT(3) +#define TPS65218_INT2_LS3_I BIT(2) +#define TPS65218_INT2_LS2_I BIT(1) +#define TPS65218_INT2_LS1_I BIT(0) + +#define TPS65218_INT_MASK1_VPRG BIT(5) +#define TPS65218_INT_MASK1_AC BIT(4) +#define TPS65218_INT_MASK1_PB BIT(3) +#define TPS65218_INT_MASK1_HOT BIT(2) +#define TPS65218_INT_MASK1_CC_AQC BIT(1) +#define TPS65218_INT_MASK1_PRGC BIT(0) + +#define TPS65218_INT_MASK2_LS3_F BIT(5) +#define TPS65218_INT_MASK2_LS2_F BIT(4) +#define TPS65218_INT_MASK2_LS1_F BIT(3) +#define TPS65218_INT_MASK2_LS3_I BIT(2) +#define TPS65218_INT_MASK2_LS2_I BIT(1) +#define TPS65218_INT_MASK2_LS1_I BIT(0) + +#define TPS65218_STATUS_FSEAL BIT(7) +#define TPS65218_STATUS_EE BIT(6) +#define TPS65218_STATUS_AC_STATE BIT(5) +#define TPS65218_STATUS_PB_STATE BIT(4) +#define TPS65218_STATUS_STATE_MASK 0xC +#define TPS65218_STATUS_CC_STAT 0x3 + +#define TPS65218_CONTROL_OFFNPFO BIT(1) +#define TPS65218_CONTROL_CC_AQ BIT(0) + +#define TPS65218_FLAG_GPO3_FLG BIT(7) +#define TPS65218_FLAG_GPO2_FLG BIT(6) +#define TPS65218_FLAG_GPO1_FLG BIT(5) +#define TPS65218_FLAG_LDO1_FLG BIT(4) +#define TPS65218_FLAG_DC4_FLG BIT(3) +#define TPS65218_FLAG_DC3_FLG BIT(2) +#define TPS65218_FLAG_DC2_FLG BIT(1) +#define TPS65218_FLAG_DC1_FLG BIT(0) + +#define TPS65218_ENABLE1_DC6_EN BIT(5) +#define TPS65218_ENABLE1_DC5_EN BIT(4) +#define TPS65218_ENABLE1_DC4_EN BIT(3) +#define TPS65218_ENABLE1_DC3_EN BIT(2) +#define TPS65218_ENABLE1_DC2_EN BIT(1) +#define TPS65218_ENABLE1_DC1_EN BIT(0) + +#define TPS65218_ENABLE2_GPIO3 BIT(6) +#define TPS65218_ENABLE2_GPIO2 BIT(5) +#define TPS65218_ENABLE2_GPIO1 BIT(4) +#define TPS65218_ENABLE2_LS3_EN BIT(3) +#define TPS65218_ENABLE2_LS2_EN BIT(2) +#define TPS65218_ENABLE2_LS1_EN BIT(1) +#define TPS65218_ENABLE2_LDO1_EN BIT(0) + + +#define TPS65218_CONFIG1_TRST BIT(7) +#define TPS65218_CONFIG1_GPO2_BUF BIT(6) +#define TPS65218_CONFIG1_IO1_SEL BIT(5) +#define TPS65218_CONFIG1_PGDLY_MASK 0x18 +#define TPS65218_CONFIG1_STRICT BIT(2) +#define TPS65218_CONFIG1_UVLO_MASK 0x3 + +#define TPS65218_CONFIG2_DC12_RST BIT(7) +#define TPS65218_CONFIG2_UVLOHYS BIT(6) +#define TPS65218_CONFIG2_LS3ILIM_MASK 0xC +#define TPS65218_CONFIG2_LS2ILIM_MASK 0x3 + +#define TPS65218_CONFIG3_LS3NPFO BIT(5) +#define TPS65218_CONFIG3_LS2NPFO BIT(4) +#define TPS65218_CONFIG3_LS1NPFO BIT(3) +#define TPS65218_CONFIG3_LS3DCHRG BIT(2) +#define TPS65218_CONFIG3_LS2DCHRG BIT(1) +#define TPS65218_CONFIG3_LS1DCHRG BIT(0) + +#define TPS65218_CONTROL_DCDC1_PFM BIT(7) +#define TPS65218_CONTROL_DCDC1_MASK 0x7F + +#define TPS65218_CONTROL_DCDC2_PFM BIT(7) +#define TPS65218_CONTROL_DCDC2_MASK 0x3F + +#define TPS65218_CONTROL_DCDC3_PFM BIT(7) +#define TPS65218_CONTROL_DCDC3_MASK 0x3F + +#define TPS65218_CONTROL_DCDC4_PFM BIT(7) +#define TPS65218_CONTROL_DCDC4_MASK 0x3F + +#define TPS65218_SLEW_RATE_GO BIT(7) +#define TPS65218_SLEW_RATE_GODSBL BIT(6) +#define TPS65218_SLEW_RATE_SLEW_MASK 0x7 + +#define TPS65218_CONTROL_LDO1_MASK 0x3F + +#define TPS65218_SEQ1_DLY8 BIT(7) +#define TPS65218_SEQ1_DLY7 BIT(6) +#define TPS65218_SEQ1_DLY6 BIT(5) +#define TPS65218_SEQ1_DLY5 BIT(4) +#define TPS65218_SEQ1_DLY4 BIT(3) +#define TPS65218_SEQ1_DLY3 BIT(2) +#define TPS65218_SEQ1_DLY2 BIT(1) +#define TPS65218_SEQ1_DLY1 BIT(0) + +#define TPS65218_SEQ2_DLYFCTR BIT(7) +#define TPS65218_SEQ2_DLY9 BIT(0) + +#define TPS65218_SEQ3_DC2_SEQ_MASK 0xF0 +#define TPS65218_SEQ3_DC1_SEQ_MASK 0xF + +#define TPS65218_SEQ4_DC4_SEQ_MASK 0xF0 +#define TPS65218_SEQ4_DC3_SEQ_MASK 0xF + +#define TPS65218_SEQ5_DC6_SEQ_MASK 0xF0 +#define TPS65218_SEQ5_DC5_SEQ_MASK 0xF + +#define TPS65218_SEQ6_LS1_SEQ_MASK 0xF0 +#define TPS65218_SEQ6_LDO1_SEQ_MASK 0xF + +#define TPS65218_SEQ7_GPO3_SEQ_MASK 0xF0 +#define TPS65218_SEQ7_GPO1_SEQ_MASK 0xF +#define TPS65218_PROTECT_NONE 0 +#define TPS65218_PROTECT_L1 1 + +enum tps65218_regulator_id { + /* DCDC's */ + TPS65218_DCDC_1, + TPS65218_DCDC_2, + TPS65218_DCDC_3, + TPS65218_DCDC_4, + TPS65218_DCDC_5, + TPS65218_DCDC_6, + /* LDOs */ + TPS65218_LDO_1, +}; + +#define TPS65218_MAX_REG_ID TPS65218_LDO_1 + +/* Number of step-down converters available */ +#define TPS65218_NUM_DCDC 6 +/* Number of LDO voltage regulators available */ +#define TPS65218_NUM_LDO 1 +/* Number of total regulators available */ +#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO) + +/* Define the TPS65218 IRQ numbers */ +enum tps65218_irqs { + /* INT1 registers */ + TPS65218_PRGC_IRQ, + TPS65218_CC_AQC_IRQ, + TPS65218_HOT_IRQ, + TPS65218_PB_IRQ, + TPS65218_AC_IRQ, + TPS65218_VPRG_IRQ, + TPS65218_INVALID1_IRQ, + TPS65218_INVALID2_IRQ, + /* INT2 registers */ + TPS65218_LS1_I_IRQ, + TPS65218_LS2_I_IRQ, + TPS65218_LS3_I_IRQ, + TPS65218_LS1_F_IRQ, + TPS65218_LS2_F_IRQ, + TPS65218_LS3_F_IRQ, + TPS65218_INVALID3_IRQ, + TPS65218_INVALID4_IRQ, +}; + +/** + * struct tps_info - packages regulator constraints + * @id: Id of the regulator + * @name: Voltage regulator name + * @min_uV: minimum micro volts + * @max_uV: minimum micro volts + * + * This data is used to check the regualtor voltage limits while setting. + */ +struct tps_info { + int id; + const char *name; + int min_uV; + int max_uV; +}; + +/** + * struct tps65218 - tps65218 sub-driver chip access routines + * + * Device data may be used to access the TPS65218 chip + */ + +struct tps65218 { + struct device *dev; + unsigned int id; + + struct mutex tps_lock; /* lock guarding the data structure */ + /* IRQ Data */ + int irq; + u32 irq_mask; + struct regmap_irq_chip_data *irq_data; + struct regulator_desc desc[TPS65218_NUM_REGULATOR]; + struct regulator_dev *rdev[TPS65218_NUM_REGULATOR]; + struct tps_info *info[TPS65218_NUM_REGULATOR]; + struct regmap *regmap; +}; + +int tps65218_reg_read(struct tps65218 *tps, unsigned int reg, + unsigned int *val); +int tps65218_reg_write(struct tps65218 *tps, unsigned int reg, + unsigned int val, unsigned int level); +int tps65218_set_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level); +int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int level); + +#endif /* __LINUX_MFD_TPS65218_H */ diff --git a/include/linux/ssbi.h b/include/linux/ssbi.h index bcbb642a7641..087b08a4d333 100644 --- a/include/linux/ssbi.h +++ b/include/linux/ssbi.h @@ -20,4 +20,24 @@ int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len); int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len); +static inline int +ssbi_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + int ret; + u8 v; + + ret = ssbi_read(context, reg, &v, 1); + if (!ret) + *val = v; + + return ret; +} + +static inline int +ssbi_reg_write(void *context, unsigned int reg, unsigned int val) +{ + u8 v = val; + return ssbi_write(context, reg, &v, 1); +} + #endif |