diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-15 09:51:18 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-15 09:51:18 -0700 |
| commit | c6dbef7307629cce855aa6b482b60cbf7777ed88 (patch) | |
| tree | d8d13630bd57090173ad9f0c5f8e3bfb392964c9 | |
| parent | ade7afe3e606f9f6ff0e6deefce140157f75540b (diff) | |
| parent | 93578a25d4e21603518daf27a5f9caa4bf79de68 (diff) | |
| download | linux-c6dbef7307629cce855aa6b482b60cbf7777ed88.tar.gz | |
Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
260 files changed, 12933 insertions, 2874 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 9fdb319dcf19..a2c63c8b1d10 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -48,6 +48,22 @@ properties: - compatible - "#clock-cells" + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required: @@ -66,5 +82,10 @@ examples: compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt index ed47e5cd067e..7c70f2ad9942 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -1,7 +1,7 @@ * Freescale i.MX8MQ USB3 PHY binding Required properties: -- compatible: Should be "fsl,imx8mq-usb-phy" +- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" - #phys-cells: must be 0 (see phy-bindings.txt in this directory) - reg: The base address and length of the registers - clocks: phandles to the clocks for each clock listed in clock-names diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 77bb5309918e..edd9d70a672a 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,7 +23,9 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + oneOf: + - const: intel,lgm-emmc-phy + - const: intel,keembay-emmc-phy "#phy-cells": const: 0 @@ -34,6 +36,10 @@ properties: clocks: maxItems: 1 + clock-names: + items: + - const: emmcclk + required: - "#phy-cells" - compatible @@ -57,4 +63,13 @@ examples: #phy-cells = <0>; }; }; + + - | + phy@20290000 { + compatible = "intel,keembay-emmc-phy"; + reg = <0x20290000 0x54>; + clocks = <&emmc>; + clock-names = "emmcclk"; + #phy-cells = <0>; + }; ... diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml new file mode 100644 index 000000000000..ce62c0b94daf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel LGM USB PHY Device Tree Bindings + +maintainers: + - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com> + +properties: + compatible: + const: intel,lgm-usb-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: USB PHY and Host controller reset + - description: APB BUS reset + - description: General Hardware reset + + reset-names: + items: + - const: phy + - const: apb + - const: phy31 + + "#phy-cells": + const: 0 + +required: + - compatible + - clocks + - reg + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@e7e00000 { + compatible = "intel,lgm-usb-phy"; + reg = <0xe7e00000 0x10000>; + clocks = <&cgu0 153>; + resets = <&rcu 0x70 0x24>, + <&rcu 0x70 0x26>, + <&rcu 0x70 0x28>; + reset-names = "phy", "apb", "phy31"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 4071438be2ba..e266ade53d87 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -4,11 +4,13 @@ $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Cadence Torrent SD0801 PHY binding for DisplayPort +title: Cadence Torrent SD0801 PHY binding description: This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) - hardware included with the Cadence MHDP DisplayPort controller. + hardware included with the Cadence MHDP DisplayPort controller. Torrent + PHY also supports multilink multiprotocol combinations including protocols + such as PCIe, USB, SGMII, QSGMII etc. maintainers: - Swapnil Jakhade <sjakhade@cadence.com> @@ -49,13 +51,21 @@ properties: - const: dptx_phy resets: - maxItems: 1 - description: - Torrent PHY reset. - See Documentation/devicetree/bindings/reset/reset.txt + minItems: 1 + maxItems: 2 + items: + - description: Torrent PHY reset. + - description: Torrent APB reset. This is optional. + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_reset + - const: torrent_apb patternProperties: - '^phy@[0-7]+$': + '^phy@[0-3]$': type: object description: Each group of PHY lanes with a single master lane should be represented as a sub-node. @@ -63,6 +73,8 @@ patternProperties: reg: description: The master lane number. This is the lowest numbered lane in the lane group. + minimum: 0 + maximum: 3 resets: minItems: 1 @@ -78,15 +90,25 @@ patternProperties: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 3, 4, 5, 6] + minimum: 1 + maximum: 9 cdns,num-lanes: description: - Number of DisplayPort lanes. + Number of lanes. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4] + enum: [1, 2, 3, 4] default: 4 + cdns,ssc-mode: + description: + Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, + EXTERNAL_SSC or INTERNAL_SSC. + Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + cdns,max-bit-rate: description: Maximum DisplayPort link bit rate to use, in Mbps @@ -99,6 +121,7 @@ patternProperties: - resets - "#phy-cells" - cdns,phy-type + - cdns,num-lanes additionalProperties: false @@ -111,6 +134,7 @@ required: - reg - reg-names - resets + - reset-names additionalProperties: false @@ -128,18 +152,56 @@ examples: <0xf0 0xfb030a00 0x0 0x00000040>; reg-names = "torrent_phy", "dptx_phy"; resets = <&phyrst 0>; + reset-names = "torrent_reset"; clocks = <&ref_clk>; clock-names = "refclk"; #address-cells = <1>; #size-cells = <0>; phy@0 { - reg = <0>; - resets = <&phyrst 1>, <&phyrst 2>, - <&phyrst 3>, <&phyrst 4>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_DP>; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <8100>; + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; + }; + - | + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/phy/phy-cadence-torrent.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>; + reg-names = "torrent_phy"; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "torrent_reset", "torrent_apb"; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 2>, <&phyrst 3>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + cdns,num-lanes = <2>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; + }; + + phy@2 { + reg = <2>; + resets = <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_SGMII>; + cdns,num-lanes = <1>; + cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>; }; }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index ef8ae9f73092..33974ad10afe 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -13,17 +13,21 @@ maintainers: properties: compatible: enum: + - qcom,sc7180-qmp-usb3-dp-phy - qcom,sc7180-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-dp-phy - qcom,sdm845-qmp-usb3-phy reg: items: - - description: Address and length of PHY's common serdes block. + - description: Address and length of PHY's USB serdes block. - description: Address and length of the DP_COM control block. + - description: Address and length of PHY's DP serdes block. reg-names: items: - - const: reg-base + - const: usb - const: dp_com + - const: dp "#clock-cells": enum: [ 1, 2 ] @@ -74,16 +78,74 @@ properties: #Required nodes: patternProperties: - "^phy@[0-9a-f]+$": + "^usb3-phy@[0-9a-f]+$": type: object description: - Each device node of QMP phy is required to have as many child nodes as - the number of lanes the PHY has. + The USB3 PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + - description: Address and length of pcs_misc. + + clocks: + items: + - description: pipe clock + + clock-names: + items: + - const: pipe0 + + clock-output-names: + items: + - const: usb3_phy_pipe_clk_src + + '#clock-cells': + const: 0 + + '#phy-cells': + const: 0 + + required: + - reg + - clocks + - clock-names + - '#clock-cells' + - '#phy-cells' + + "^dp-phy@[0-9a-f]+$": + type: object + description: + The DP PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + + '#clock-cells': + const: 1 + + '#phy-cells': + const: 0 + + required: + - reg + - '#clock-cells' + - '#phy-cells' required: - compatible - reg - - reg-names - "#clock-cells" - "#address-cells" - "#size-cells" @@ -101,14 +163,15 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; reg = <0x088e9000 0x18c>, - <0x088e8000 0x10>; - reg-names = "reg-base", "dp_com"; + <0x088e8000 0x10>, + <0x088ea000 0x40>; + reg-names = "usb", "dp_com", "dp"; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x088e9000 0x1000>; + ranges = <0x0 0x088e9000 0x2000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, @@ -123,7 +186,7 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; - phy@200 { + usb3-phy@200 { reg = <0x200 0x128>, <0x400 0x200>, <0xc00 0x218>, @@ -136,4 +199,14 @@ examples: clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp-phy@88ea200 { + reg = <0xa200 0x200>, + <0xa400 0x200>, + <0xaa00 0x200>, + <0xa600 0x200>, + <0xa800 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml new file mode 100644 index 000000000000..bab2ff4d9dc9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier AHCI PHY + +description: | + This describes the deivcetree bindings for PHY interfaces built into + AHCI controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pxs2-ahci-phy + - socionext,uniphier-pxs3-ahci-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + maxItems: 2 + + clock-names: + oneOf: + - items: # for PXs2 + - const: link + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + ahci-glue@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml new file mode 100644 index 000000000000..15207ca9548f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP USB2 PHY + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,dra7x-usb2 + - ti,dra7x-usb2-phy2 + - ti,am654-usb2 + - enum: + - ti,omap-usb2 + - items: + - const: ti,am437x-usb2 + - items: + - const: ti,omap-usb2 + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + items: + - description: wakeup clock + - description: reference clock + + clock-names: + minItems: 1 + items: + - const: wkupclk + - const: refclk + + syscon-phy-power: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + phandle/offset pair. Phandle to the system control module and + register offset to power on/off the PHY. + + ctrl-module: + $ref: /schemas/types.yaml#definitions/phandle + description: + (deprecated) phandle of the control module used by PHY driver + to power on the PHY. Use syscon-phy-power instead. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +examples: + - | + usb0_phy: phy@4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x4100000 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 5ffc95c62909..c33e9bc79521 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -45,9 +45,15 @@ properties: ranges: true assigned-clocks: + minItems: 1 maxItems: 2 assigned-clock-parents: + minItems: 1 + maxItems: 2 + + assigned-clock-rates: + minItems: 1 maxItems: 2 typec-dir-gpios: @@ -119,9 +125,10 @@ patternProperties: logic. properties: clocks: + minItems: 2 maxItems: 4 - description: Phandle to four clock nodes representing the inputs to - refclk_dig + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig "#clock-cells": const: 0 @@ -203,7 +210,7 @@ examples: }; refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 8f93c3b694a7..60c9d0ac75e6 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 { reg-names = "otghs_control"; }; -OMAP USB2 PHY - -Required properties: - - compatible: Should be "ti,omap-usb2" - Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on - DRA7x - Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY - in DRA7x - Should be "ti,am654-usb2" for the USB2 PHYs on AM654. - - reg : Address and length of the register set for the device. - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - - clocks: a list of phandles and clock-specifier pairs, one for each entry in - clock-names. - - clock-names: should include: - * "wkupclk" - wakeup clock. - * "refclk" - reference clock (optional). - -Deprecated properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -Recommended properies: -- syscon-phy-power : phandle/offset pair. Phandle to the system control - module and the register offset to power on/off the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; - clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; - clock-names = "wkupclk", "refclk"; -}; - TI PIPE3 PHY Required properties: diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index 5b04a7dfa018..c0058332b967 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -25,13 +25,14 @@ description: | The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in host-only mode. - The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. + The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY. properties: compatible: enum: - amlogic,meson-gxl-usb-ctrl - amlogic,meson-gxm-usb-ctrl + - amlogic,meson-axg-usb-ctrl - amlogic,meson-g12a-usb-ctrl - amlogic,meson-a1-usb-ctrl @@ -155,6 +156,25 @@ allOf: properties: compatible: enum: + - amlogic,meson-axg-usb-ctrl + + then: + properties: + phy-names: + items: + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + required: + - clock-names + - if: + properties: + compatible: + enum: - amlogic,meson-a1-usb-ctrl then: diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 423b99a8fd97..a4002624ba14 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -82,6 +82,7 @@ Required properties: "atmel,at91sam9rl-udc" "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" + "microchip,sam9x60-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml new file mode 100644 index 000000000000..ac20b98e9910 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence USBSS-DRD controller bindings + +maintainers: + - Pawel Laszczak <pawell@cadence.com> + +properties: + compatible: + const: cdns,usb3 + + reg: + items: + - description: OTG controller registers + - description: XHCI Host controller registers + - description: DEVICE controller registers + + reg-names: + items: + - const: otg + - const: xhci + - const: dev + + interrupts: + items: + - description: OTG/DRD controller interrupt + - description: XHCI host controller interrupt + - description: Device controller interrupt + + interrupt-names: + items: + - const: host + - const: peripheral + - const: otg + + dr_mode: + enum: [host, otg, peripheral] + + maximum-speed: + enum: [super-speed, high-speed, full-speed] + + phys: + minItems: 1 + maxItems: 2 + + phy-names: + minItems: 1 + maxItems: 2 + items: + anyOf: + - const: cdns3,usb2-phy + - const: cdns3,usb3-phy + + cdns,on-chip-buff-size: + description: + size of memory intended as internal memory for endpoints + buffers expressed in KB + $ref: /schemas/types.yaml#/definitions/uint32 + + cdns,phyrst-a-enable: + description: Enable resetting of PHY if Rx fail is detected + type: boolean + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt deleted file mode 100644 index b7dc606d37b5..000000000000 --- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt +++ /dev/null @@ -1,45 +0,0 @@ -Binding for the Cadence USBSS-DRD controller - -Required properties: - - reg: Physical base address and size of the controller's register areas. - Controller has 3 different regions: - - HOST registers area - - DEVICE registers area - - OTG/DRD registers area - - reg-names - register memory area names: - "xhci" - for HOST registers space - "dev" - for DEVICE registers space - "otg" - for OTG/DRD registers space - - compatible: Should contain: "cdns,usb3" - - interrupts: Interrupts used by cdns3 controller: - "host" - interrupt used by XHCI driver. - "peripheral" - interrupt used by device driver - "otg" - interrupt used by DRD/OTG part of driver - -Optional properties: - - maximum-speed : valid arguments are "super-speed", "high-speed" and - "full-speed"; refer to usb/generic.txt - - dr_mode: Should be one of "host", "peripheral" or "otg". - - phys: reference to the USB PHY - - phy-names: from the *Generic PHY* bindings; - Supported names are: - - cdns3,usb2-phy - - cdns3,usb3-phy - - - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints - buffers expressed in KB - -Example: - usb@f3000000 { - compatible = "cdns,usb3"; - interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host", "peripheral", "otg"; - reg = <0xf3000000 0x10000>, /* memory area for HOST registers */ - <0xf3010000 0x10000>, /* memory area for DEVICE registers */ - <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */ - reg-names = "xhci", "dev", "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy"; - }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 51376cbe5f3d..a5c5db6a0b2d 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -100,6 +100,15 @@ i.mx specific properties It's recommended to specify the over current polarity. - power-active-high: power signal polarity is active high - external-vbus-divider: enables off-chip resistor divider for Vbus +- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current + Control. This signal controls the amount of current sourced to the + USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. + The range is from 0x0 to 0x3, the default value is 0x1. + Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1. +- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment. + Adjust the high-speed transmitter DC level voltage. + The range is from 0x0 to 0xf, the default value is 0x3. + Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. Example: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index ffa157a0fce7..e5ee51b7b470 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -39,6 +39,7 @@ properties: - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg + - const: apm,apm82181-dwc-otg - const: snps,dwc2 - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg @@ -102,6 +103,10 @@ properties: dr_mode: enum: [host, peripheral, otg] + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + g-rx-fifo-size: $ref: /schemas/types.yaml#/definitions/uint32 description: size of rx fifo size in gadget mode. diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index d03edf9d3935..1aae2b6160c1 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -78,6 +78,9 @@ Optional properties: park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. + - snps,dis-split-quirk: when set, change the way URBs are handled by the + driver. Needed to avoid -EPROTO errors with usbhid + on some devices (Hikey 970). - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml new file mode 100644 index 000000000000..dd32c10ce6c7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay DWC3 USB controller + +maintainers: + - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> + +properties: + compatible: + const: intel,keembay-dwc3 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: async_master + - const: ref + - const: alt_ref + - const: suspend + + ranges: true + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block. + The content of the node is defined in dwc3.txt. + +required: + - compatible + - clocks + - clock-names + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #define KEEM_BAY_A53_AUX_USB + #define KEEM_BAY_A53_AUX_USB_REF + #define KEEM_BAY_A53_AUX_USB_ALT_REF + #define KEEM_BAY_A53_AUX_USB_SUSPEND + + usb { + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + dwc3@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "peripheral"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml new file mode 100644 index 000000000000..1e8e1c22180e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators, + regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller. + This document only describes MT6360 Type-C Port Switch and Power Delivery controller. + +properties: + compatible: + enum: + - mediatek,mt6360-tcpc + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: PD_IRQB + + connector: + type: object + $ref: ../connector/usb-connector.yaml# + description: + Properties for usb c connector. + +additionalProperties: false + +required: + - compatible + - interrupts + - interrupt-names + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/usb/pd.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + mt6360@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index add9f7b66da0..0f078bd0a3e5 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -30,6 +30,7 @@ properties: - renesas,xhci-r8a774a1 # RZ/G2M - renesas,xhci-r8a774b1 # RZ/G2N - renesas,xhci-r8a774c0 # RZ/G2E + - renesas,xhci-r8a774e1 # RZ/G2H - renesas,xhci-r8a7795 # R-Car H3 - renesas,xhci-r8a7796 # R-Car M3-W - renesas,xhci-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index e3cdeab1199f..929a3f413b44 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -16,6 +16,7 @@ properties: - renesas,r8a774a1-usb3-peri # RZ/G2M - renesas,r8a774b1-usb3-peri # RZ/G2N - renesas,r8a774c0-usb3-peri # RZ/G2E + - renesas,r8a774e1-usb3-peri # RZ/G2H - renesas,r8a7795-usb3-peri # R-Car H3 - renesas,r8a7796-usb3-peri # R-Car M3-W - renesas,r8a77961-usb3-peri # R-Car M3-W+ @@ -52,11 +53,24 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: phandle of a companion. - port: + ports: description: | any connector to the data bus of this controller should be modelled using the OF graph bindings specified, if the "usb-role-switch" property is used. + type: object + properties: + port@0: + type: object + description: High Speed (HS) data bus. + + port@1: + type: object + description: Super Speed (SS) data bus. + + required: + - port@0 + - port@1 required: - compatible @@ -79,9 +93,20 @@ examples: companion = <&xhci0>; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index af4826fb6824..737c1f47b7de 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -39,6 +39,7 @@ properties: - renesas,usbhs-r8a774a1 # RZ/G2M - renesas,usbhs-r8a774b1 # RZ/G2N - renesas,usbhs-r8a774c0 # RZ/G2E + - renesas,usbhs-r8a774e1 # RZ/G2H - renesas,usbhs-r8a7795 # R-Car H3 - renesas,usbhs-r8a7796 # R-Car M3-W - renesas,usbhs-r8a77961 # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt deleted file mode 100644 index 2bd21b22ce95..000000000000 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt +++ /dev/null @@ -1,38 +0,0 @@ -TI HD3SS3220 TypeC DRP Port Controller. - -Required properties: - - compatible: Must be "ti,hd3ss3220". - - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. - - interrupts: An interrupt specifier. - -Required sub-node: - - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The - bindings of the connector node are specified in: - - Documentation/devicetree/bindings/connector/usb-connector.yaml - -Example: -hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hd3ss3220_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml new file mode 100644 index 000000000000..5fe9e6211ba2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI HD3SS3220 TypeC DRP Port Controller + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: |- + HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel + Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The + HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a + Dual Role Port (DRP) making it ideal for any application. + +properties: + compatible: + const: ti,hd3ss3220 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + description: OF graph bindings (specified in bindings/graph.txt) that model + SS data bus to the SS capable connector. + type: object + properties: + port@0: + type: object + description: Super Speed (SS) MUX inputs connected to SS capable connector. + $ref: /connector/usb-connector.yaml#/properties/ports/properties/port@1 + + port@1: + type: object + description: Output of 2:1 MUX connected to Super Speed (SS) data bus. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7473a33386fa..1975f409e684 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3454,6 +3454,14 @@ F: drivers/bus/brcmstb_gisb.c F: drivers/pci/controller/pcie-brcmstb.c N: brcmstb +BROADCOM BDC DRIVER +M: Al Cooper <alcooperx@gmail.com> +L: linux-usb@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: Documentation/devicetree/bindings/usb/brcm,bdc.txt +F: drivers/usb/gadget/udc/bdc/ + BROADCOM BMIPS CPUFREQ DRIVER M: Markus Mayer <mmayer@broadcom.com> M: bcm-kernel-feedback-list@broadcom.com @@ -3831,6 +3839,16 @@ S: Orphan F: Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt F: drivers/mtd/nand/raw/cadence-nand-controller.c +CADENCE USB3 DRD IP DRIVER +M: Peter Chen <peter.chen@nxp.com> +M: Pawel Laszczak <pawell@cadence.com> +M: Roger Quadros <rogerq@ti.com> +L: linux-usb@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +F: Documentation/devicetree/bindings/usb/cdns-usb3.txt +F: drivers/usb/cdns3/ + CADET FM/AM RADIO RECEIVER DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> L: linux-media@vger.kernel.org @@ -11037,7 +11055,7 @@ F: net/dsa/tag_mtk.c MEDIATEK USB3 DRD IP DRIVER M: Chunfeng Yun <chunfeng.yun@mediatek.com> -L: linux-usb@vger.kernel.org (moderated for non-subscribers) +L: linux-usb@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index ca15ff8fea18..eae28b82c7fd 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -563,6 +563,12 @@ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; }; + + usb0 { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; }; /* pinctrl */ &pmc { @@ -666,6 +672,13 @@ }; }; +&usb0 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + &usb1 { num-ports = <3>; atmel,vbus-gpio = <0 diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 222d7825e1ab..e94244a215af 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -4,6 +4,8 @@ #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; model = "Raspberry Pi 4 Model B"; @@ -88,6 +90,11 @@ ""; status = "okay"; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; &gpio { @@ -207,6 +214,21 @@ }; }; +&pcie0 { + pci@1,0 { + #address-cells = <3>; + #size-cells = <2>; + ranges; + + reg = <0 0 0 0 0>; + + usb@1,0 { + reg = <0x10000 0 0 0 0>; + resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; + }; + }; +}; + /* uart0 communicates with the BT module */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index d10843da4a85..42f76212d472 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -69,6 +69,20 @@ #size-cells = <1>; ranges; + usb0: gadget@500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sam9x60-udc"; + reg = <0x00500000 0x100000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + clock-names = "pclk", "hclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 113c661eb848..1682f8b454a2 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -555,6 +555,7 @@ struct device *acpi_get_first_physical_node(struct acpi_device *adev) mutex_unlock(physical_node_lock); return phys_dev; } +EXPORT_SYMBOL_GPL(acpi_get_first_physical_node); static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, const struct device *dev) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 4ce270513695..759d7828931d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -212,19 +212,16 @@ static int ath3k_load_firmware(struct usb_device *udev, BT_DBG("udev %p", udev); - pipe = usb_sndctrlpipe(udev, 0); - send_buf = kmalloc(BULK_SIZE, GFP_KERNEL); if (!send_buf) { BT_ERR("Can't allocate memory chunk for firmware"); return -ENOMEM; } - memcpy(send_buf, firmware->data, FW_HDR_SIZE); - err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR, - 0, 0, send_buf, FW_HDR_SIZE, - USB_CTRL_SET_TIMEOUT); - if (err < 0) { + err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR, + 0, 0, firmware->data, FW_HDR_SIZE, + USB_CTRL_SET_TIMEOUT, GFP_KERNEL); + if (err) { BT_ERR("Can't change to loading configuration err"); goto error; } @@ -259,44 +256,19 @@ error: static int ath3k_get_state(struct usb_device *udev, unsigned char *state) { - int ret, pipe = 0; - char *buf; - - buf = kmalloc(sizeof(*buf), GFP_KERNEL); - if (!buf) - return -ENOMEM; - - pipe = usb_rcvctrlpipe(udev, 0); - ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT); - - *state = *buf; - kfree(buf); - - return ret; + return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + state, 1, USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); } static int ath3k_get_version(struct usb_device *udev, struct ath3k_version *version) { - int ret, pipe = 0; - struct ath3k_version *buf; - const int size = sizeof(*buf); - - buf = kmalloc(size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - pipe = usb_rcvctrlpipe(udev, 0); - ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - buf, size, USB_CTRL_SET_TIMEOUT); - - memcpy(version, buf, size); - kfree(buf); - - return ret; + return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + version, sizeof(*version), USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); } static int ath3k_load_fwfile(struct usb_device *udev, @@ -316,13 +288,11 @@ static int ath3k_load_fwfile(struct usb_device *udev, } size = min_t(uint, count, FW_HDR_SIZE); - memcpy(send_buf, firmware->data, size); - pipe = usb_sndctrlpipe(udev, 0); - ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD, - USB_TYPE_VENDOR, 0, 0, send_buf, - size, USB_CTRL_SET_TIMEOUT); - if (ret < 0) { + ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0, + firmware->data, size, USB_CTRL_SET_TIMEOUT, + GFP_KERNEL); + if (ret) { BT_ERR("Can't change to loading configuration err"); kfree(send_buf); return ret; @@ -355,23 +325,19 @@ static int ath3k_load_fwfile(struct usb_device *udev, return 0; } -static int ath3k_switch_pid(struct usb_device *udev) +static void ath3k_switch_pid(struct usb_device *udev) { - int pipe = 0; - - pipe = usb_sndctrlpipe(udev, 0); - return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID, - USB_TYPE_VENDOR, 0, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL); } static int ath3k_set_normal_mode(struct usb_device *udev) { unsigned char fw_state; - int pipe = 0, ret; + int ret; ret = ath3k_get_state(udev, &fw_state); - if (ret < 0) { + if (ret) { BT_ERR("Can't get state to change to normal mode err"); return ret; } @@ -381,10 +347,9 @@ static int ath3k_set_normal_mode(struct usb_device *udev) return 0; } - pipe = usb_sndctrlpipe(udev, 0); - return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE, - USB_TYPE_VENDOR, 0, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); + return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE, + USB_TYPE_VENDOR, 0, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_KERNEL); } static int ath3k_load_patch(struct usb_device *udev) @@ -397,7 +362,7 @@ static int ath3k_load_patch(struct usb_device *udev) int ret; ret = ath3k_get_state(udev, &fw_state); - if (ret < 0) { + if (ret) { BT_ERR("Can't get state to change to load ram patch err"); return ret; } @@ -408,7 +373,7 @@ static int ath3k_load_patch(struct usb_device *udev) } ret = ath3k_get_version(udev, &fw_version); - if (ret < 0) { + if (ret) { BT_ERR("Can't get version to change to load ram patch err"); return ret; } @@ -449,13 +414,13 @@ static int ath3k_load_syscfg(struct usb_device *udev) int clk_value, ret; ret = ath3k_get_state(udev, &fw_state); - if (ret < 0) { + if (ret) { BT_ERR("Can't get state to change to load configuration err"); return -EBUSY; } ret = ath3k_get_version(udev, &fw_version); - if (ret < 0) { + if (ret) { BT_ERR("Can't get version to change to load ram patch err"); return ret; } @@ -529,7 +494,7 @@ static int ath3k_probe(struct usb_interface *intf, return ret; } ret = ath3k_set_normal_mode(udev); - if (ret < 0) { + if (ret) { BT_ERR("Set normal mode failed"); return ret; } diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index fbd785dd0513..4843e94713a4 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -178,9 +178,8 @@ config ISCSI_IBFT Otherwise, say N. config RASPBERRYPI_FIRMWARE - bool "Raspberry Pi Firmware Driver" + tristate "Raspberry Pi Firmware Driver" depends on BCM2835_MBOX - default USB_PCI help This option enables support for communicating with the firmware on the Raspberry Pi. diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 8f2fb4c562da..2371d08bdd17 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,8 +12,6 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> #include <soc/bcm2835/raspberrypi-firmware.h> #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -21,8 +19,6 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 -#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 - static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -301,63 +297,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); -/* - * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that - * implements xHCI. After a PCI reset, VL805's firmware may either be loaded - * directly from an EEPROM or, if not present, by the SoC's co-processor, - * VideoCore. RPi4's VideoCore OS contains both the non public firmware load - * logic and the VL805 firmware blob. This function triggers the aforementioned - * process. - */ -int rpi_firmware_init_vl805(struct pci_dev *pdev) -{ - struct device_node *fw_np; - struct rpi_firmware *fw; - u32 dev_addr, version; - int ret; - - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (!fw_np) - return 0; - - fw = rpi_firmware_get(fw_np); - of_node_put(fw_np); - if (!fw) - return -ENODEV; - - /* - * Make sure we don't trigger a firmware load unnecessarily. - * - * If something went wrong with PCI, this whole exercise would be - * futile as VideoCore expects from us a configured PCI bus. Just take - * the faulty version (likely ~0) and let xHCI's registration fail - * further down the line. - */ - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); - if (version) - goto exit; - - dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | - PCI_FUNC(pdev->devfn) << 12; - - ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, - &dev_addr, sizeof(dev_addr)); - if (ret) - return ret; - - /* Wait for vl805 to startup */ - usleep_range(200, 1000); - - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, - &version); -exit: - pci_info(pdev, "VL805 firmware version %08x\n", version); - - return 0; -} -EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); - static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 060a8a03e6c4..32e1335c94ad 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -124,62 +124,31 @@ static void async_ctrl_callback(struct urb *urb) static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data) { - u8 *buf; - int ret; - - buf = kmalloc(size, GFP_NOIO); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(pegasus->usb, usb_rcvctrlpipe(pegasus->usb, 0), - PEGASUS_REQ_GET_REGS, PEGASUS_REQT_READ, 0, - indx, buf, size, 1000); - if (ret < 0) - netif_dbg(pegasus, drv, pegasus->net, - "%s returned %d\n", __func__, ret); - else if (ret <= size) - memcpy(data, buf, ret); - kfree(buf); - return ret; + return usb_control_msg_recv(pegasus->usb, 0, PEGASUS_REQ_GET_REGS, + PEGASUS_REQT_READ, 0, indx, data, size, + 1000, GFP_NOIO); } static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, const void *data) { - u8 *buf; - int ret; - - buf = kmemdup(data, size, GFP_NOIO); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0), - PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0, - indx, buf, size, 100); - if (ret < 0) - netif_dbg(pegasus, drv, pegasus->net, - "%s returned %d\n", __func__, ret); - kfree(buf); - return ret; + return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS, + PEGASUS_REQT_WRITE, 0, indx, data, size, + 1000, GFP_NOIO); } +/* + * There is only one way to write to a single ADM8511 register and this is via + * specific control request. 'data' is ignored by the device, but it is here to + * not break the API. + */ static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data) { - u8 *buf; - int ret; - - buf = kmemdup(&data, 1, GFP_NOIO); - if (!buf) - return -ENOMEM; + void *buf = &data; - ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0), - PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data, - indx, buf, 1, 1000); - if (ret < 0) - netif_dbg(pegasus, drv, pegasus->net, - "%s returned %d\n", __func__, ret); - kfree(buf); - return ret; + return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG, + PEGASUS_REQT_WRITE, data, indx, buf, 1, + 1000, GFP_NOIO); } static int update_eth_regs_async(pegasus_t *pegasus) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 9d079dc2a535..f020401adf04 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -152,36 +152,16 @@ static const char driver_name [] = "rtl8150"; */ static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) { - void *buf; - int ret; - - buf = kmalloc(size, GFP_NOIO); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), - RTL8150_REQ_GET_REGS, RTL8150_REQT_READ, - indx, 0, buf, size, 500); - if (ret > 0 && ret <= size) - memcpy(data, buf, ret); - kfree(buf); - return ret; + return usb_control_msg_recv(dev->udev, 0, RTL8150_REQ_GET_REGS, + RTL8150_REQT_READ, indx, 0, data, size, + 1000, GFP_NOIO); } static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data) { - void *buf; - int ret; - - buf = kmemdup(data, size, GFP_NOIO); - if (!buf) - return -ENOMEM; - - ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), - RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE, - indx, 0, buf, size, 500); - kfree(buf); - return ret; + return usb_control_msg_send(dev->udev, 0, RTL8150_REQ_SET_REGS, + RTL8150_REQT_WRITE, indx, 0, data, size, + 1000, GFP_NOIO); } static void async_set_reg_cb(struct urb *urb) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 85fa7d54f11f..bac63d04297f 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,8 +28,6 @@ #include <linux/string.h> #include <linux/types.h> -#include <soc/bcm2835/raspberrypi-firmware.h> - #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -931,24 +929,9 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; - struct device_node *fw_np; struct brcm_pcie *pcie; int ret; - /* - * We have to wait for Raspberry Pi's firmware interface to be up as a - * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's - * probe can race with the firmware interface's (see - * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup. - */ - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (fw_np && !rpi_firmware_get(fw_np)) { - of_node_put(fw_np); - return -EPROBE_DEFER; - } - of_node_put(fw_np); - bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2a589b6d6ed8..01f23e30bd8f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3673,63 +3673,6 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, quirk_apple_poweroff_thunderbolt); - -/* - * Apple: Wait for the Thunderbolt controller to reestablish PCI tunnels - * - * During suspend the Thunderbolt controller is reset and all PCI - * tunnels are lost. The NHI driver will try to reestablish all tunnels - * during resume. We have to manually wait for the NHI since there is - * no parent child relationship between the NHI and the tunneled - * bridges. - */ -static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) -{ - struct pci_dev *sibling = NULL; - struct pci_dev *nhi = NULL; - - if (!x86_apple_machine) - return; - if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) - return; - - /* - * Find the NHI and confirm that we are a bridge on the Thunderbolt - * host controller and not on a Thunderbolt endpoint. - */ - sibling = pci_get_slot(dev->bus, 0x0); - if (sibling == dev) - goto out; /* we are the downstream bridge to the NHI */ - if (!sibling || !sibling->subordinate) - goto out; - nhi = pci_get_slot(sibling->subordinate, 0x0); - if (!nhi) - goto out; - if (nhi->vendor != PCI_VENDOR_ID_INTEL - || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && - nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && - nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && - nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) - || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) - goto out; - pci_info(dev, "quirk: waiting for Thunderbolt to reestablish PCI tunnels...\n"); - device_pm_wait_for_dev(&dev->dev, &nhi->dev); -out: - pci_dev_put(nhi); - pci_dev_put(sibling); -} -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, - quirk_apple_wait_for_thunderbolt); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, - quirk_apple_wait_for_thunderbolt); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, - quirk_apple_wait_for_thunderbolt); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, - quirk_apple_wait_for_thunderbolt); #endif /* diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index de9362c25c07..01b53f86004c 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -49,6 +49,17 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config USB_LGM_PHY + tristate "INTEL Lightning Mountain USB PHY Driver" + depends on USB_SUPPORT + select USB_PHY + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + Enable this to support Intel DWC3 PHY USB phy. This driver provides + interface to interact with USB GEN-II and USB 3.x PHY that is part + of the Intel network SOC. + source "drivers/phy/allwinner/Kconfig" source "drivers/phy/amlogic/Kconfig" source "drivers/phy/broadcom/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index c27408e4daae..6eb2916773c5 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o obj-y += allwinner/ \ amlogic/ \ broadcom/ \ diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c index 14f45bc35cc5..47b029fbebbd 100644 --- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -13,6 +13,7 @@ #include <linux/bcma/bcma.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/iopoll.h> #include <linux/mdio.h> #include <linux/module.h> #include <linux/of_address.h> @@ -258,29 +259,24 @@ static struct mdio_driver bcm_ns_usb3_mdio_driver = { **************************************************/ static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, - u32 mask, u32 value, unsigned long timeout) + u32 mask, u32 value, int usec) { - unsigned long deadline = jiffies + timeout; u32 val; + int ret; - do { - val = readl(addr); - if ((val & mask) == value) - return 0; - cpu_relax(); - udelay(10); - } while (!time_after_eq(jiffies, deadline)); + ret = readl_poll_timeout_atomic(addr, val, ((val & mask) == value), + 10, usec); + if (ret) + dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); - dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); - - return -EBUSY; + return ret; } static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) { return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, 0x0100, 0x0000, - usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); + BCM_NS_USB3_MII_MNG_TIMEOUT_US); } static int bcm_ns_usb3_platform_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c index 527625912b78..9630ac127366 100644 --- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/irq.h> #include <linux/mfd/syscon.h> #include <linux/module.h> @@ -87,17 +88,11 @@ static const unsigned int usb_extcon_cable[] = { static inline int pll_lock_stat(u32 usb_reg, int reg_mask, struct ns2_phy_driver *driver) { - int retry = PLL_LOCK_RETRY; u32 val; - do { - udelay(1); - val = readl(driver->icfgdrd_regs + usb_reg); - if (val & reg_mask) - return 0; - } while (--retry > 0); - - return -EBUSY; + return readl_poll_timeout_atomic(driver->icfgdrd_regs + usb_reg, + val, (val & reg_mask), 1, + PLL_LOCK_RETRY); } static int ns2_drd_phy_init(struct phy *phy) diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c index 77c025a0720c..c3e99ad17487 100644 --- a/drivers/phy/broadcom/phy-bcm-sr-usb.c +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -5,6 +5,7 @@ #include <linux/delay.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> @@ -109,19 +110,15 @@ static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set) static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit) { - int retry; - u32 rd_data; + u32 data; + int ret; - retry = PLL_LOCK_RETRY_COUNT; - do { - rd_data = readl(addr); - if (rd_data & bit) - return 0; - udelay(1); - } while (--retry > 0); + ret = readl_poll_timeout_atomic(addr, data, (data & bit), 1, + PLL_LOCK_RETRY_COUNT); + if (ret) + pr_err("%s: FAIL\n", __func__); - pr_err("%s: FAIL\n", __func__); - return -ETIMEDOUT; + return ret; } static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg) diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c index 016514e4aa54..88e239adc3b8 100644 --- a/drivers/phy/cadence/phy-cadence-salvo.c +++ b/drivers/phy/cadence/phy-cadence-salvo.c @@ -97,7 +97,7 @@ struct cdns_reg_pairs { struct cdns_salvo_data { u8 reg_offset_shift; - struct cdns_reg_pairs *init_sequence_val; + const struct cdns_reg_pairs *init_sequence_val; u8 init_sequence_length; }; @@ -126,7 +126,7 @@ static void cdns_salvo_write(struct cdns_salvo_phy *salvo_phy, * Below bringup sequence pair are from Cadence PHY's User Guide * and NXP platform tuning results. */ -static struct cdns_reg_pairs cdns_nxp_sequence_pair[] = { +static const struct cdns_reg_pairs cdns_nxp_sequence_pair[] = { {0x0830, PHY_PMA_CMN_CTRL1}, {0x0010, TB_ADDR_CMN_DIAG_HSCLK_SEL}, {0x00f0, TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR}, @@ -217,7 +217,7 @@ static int cdns_salvo_phy_init(struct phy *phy) return ret; for (i = 0; i < data->init_sequence_length; i++) { - struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i; + const struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i; cdns_salvo_write(salvo_phy, reg_pair->off, reg_pair->val); } @@ -251,7 +251,7 @@ static int cdns_salvo_phy_power_off(struct phy *phy) return 0; } -static struct phy_ops cdns_salvo_phy_ops = { +static const struct phy_ops cdns_salvo_phy_ops = { .init = cdns_salvo_phy_init, .power_on = cdns_salvo_phy_power_on, .power_off = cdns_salvo_phy_power_off, diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c index faed652b73f7..453ef26fa1c7 100644 --- a/drivers/phy/cadence/phy-cadence-sierra.c +++ b/drivers/phy/cadence/phy-cadence-sierra.c @@ -172,10 +172,10 @@ struct cdns_sierra_data { u32 pcie_ln_regs; u32 usb_cmn_regs; u32 usb_ln_regs; - struct cdns_reg_pairs *pcie_cmn_vals; - struct cdns_reg_pairs *pcie_ln_vals; - struct cdns_reg_pairs *usb_cmn_vals; - struct cdns_reg_pairs *usb_ln_vals; + const struct cdns_reg_pairs *pcie_cmn_vals; + const struct cdns_reg_pairs *pcie_ln_vals; + const struct cdns_reg_pairs *usb_cmn_vals; + const struct cdns_reg_pairs *usb_ln_vals; }; struct cdns_regmap_cdb_context { @@ -233,7 +233,7 @@ static int cdns_regmap_read(void *context, unsigned int reg, unsigned int *val) .reg_read = cdns_regmap_read, \ } -static struct regmap_config cdns_sierra_lane_cdb_config[] = { +static const struct regmap_config cdns_sierra_lane_cdb_config[] = { SIERRA_LANE_CDB_REGMAP_CONF("0"), SIERRA_LANE_CDB_REGMAP_CONF("1"), SIERRA_LANE_CDB_REGMAP_CONF("2"), @@ -252,7 +252,7 @@ static struct regmap_config cdns_sierra_lane_cdb_config[] = { SIERRA_LANE_CDB_REGMAP_CONF("15"), }; -static struct regmap_config cdns_sierra_common_cdb_config = { +static const struct regmap_config cdns_sierra_common_cdb_config = { .name = "sierra_common_cdb", .reg_stride = 1, .fast_io = true, @@ -260,7 +260,7 @@ static struct regmap_config cdns_sierra_common_cdb_config = { .reg_read = cdns_regmap_read, }; -static struct regmap_config cdns_sierra_phy_config_ctrl_config = { +static const struct regmap_config cdns_sierra_phy_config_ctrl_config = { .name = "sierra_phy_config_ctrl", .reg_stride = 1, .fast_io = true, @@ -274,7 +274,7 @@ static int cdns_sierra_phy_init(struct phy *gphy) struct cdns_sierra_phy *phy = dev_get_drvdata(gphy->dev.parent); struct regmap *regmap; int i, j; - struct cdns_reg_pairs *cmn_vals, *ln_vals; + const struct cdns_reg_pairs *cmn_vals, *ln_vals; u32 num_cmn_regs, num_ln_regs; /* Initialise the PHY registers, unless auto configured */ @@ -654,7 +654,7 @@ static int cdns_sierra_phy_remove(struct platform_device *pdev) } /* refclk100MHz_32b_PCIe_cmn_pll_ext_ssc */ -static struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = { +static const struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = { {0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG}, {0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG}, {0x8A06, SIERRA_CMN_PLLLC_BWCAL_MODE1_PREG}, @@ -663,7 +663,7 @@ static struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = { }; /* refclk100MHz_32b_PCIe_ln_ext_ssc */ -static struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = { +static const struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = { {0x813E, SIERRA_CLKPATHCTRL_TMR_PREG}, {0x8047, SIERRA_RX_CREQ_FLTR_A_MODE3_PREG}, {0x808F, SIERRA_RX_CREQ_FLTR_A_MODE2_PREG}, @@ -674,7 +674,7 @@ static struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = { }; /* refclk100MHz_20b_USB_cmn_pll_ext_ssc */ -static struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = { +static const struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = { {0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG}, {0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG}, {0x0000, SIERRA_CMN_PLLLC_BWCAL_MODE0_PREG}, @@ -682,7 +682,7 @@ static struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = { }; /* refclk100MHz_20b_USB_ln_ext_ssc */ -static struct cdns_reg_pairs cdns_usb_ln_regs_ext_ssc[] = { +static const struct cdns_reg_pairs cdns_usb_ln_regs_ext_ssc[] = { {0xFE0A, SIERRA_DET_STANDEC_A_PREG}, {0x000F, SIERRA_DET_STANDEC_B_PREG}, {0x55A5, SIERRA_DET_STANDEC_C_PREG}, diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c index 7116127358ee..f310e15d94cb 100644 --- a/drivers/phy/cadence/phy-cadence-torrent.c +++ b/drivers/phy/cadence/phy-cadence-torrent.c @@ -25,11 +25,14 @@ #define REF_CLK_19_2MHz 19200000 #define REF_CLK_25MHz 25000000 -#define DEFAULT_NUM_LANES 4 #define MAX_NUM_LANES 4 #define DEFAULT_MAX_BIT_RATE 8100 /* in Mbps */ +#define NUM_SSC_MODE 3 +#define NUM_PHY_TYPE 6 + #define POLL_TIMEOUT_US 5000 +#define PLL_LOCK_TIMEOUT 100000 #define TORRENT_COMMON_CDB_OFFSET 0x0 @@ -79,6 +82,8 @@ #define CMN_PLLSM0_PLLLOCK_TMR 0x002CU #define CMN_PLLSM1_PLLPRE_TMR 0x0032U #define CMN_PLLSM1_PLLLOCK_TMR 0x0034U +#define CMN_CDIAG_CDB_PWRI_OVRD 0x0041U +#define CMN_CDIAG_XCVRC_PWRI_OVRD 0x0047U #define CMN_BGCAL_INIT_TMR 0x0064U #define CMN_BGCAL_ITER_TMR 0x0065U #define CMN_IBCAL_INIT_TMR 0x0074U @@ -99,6 +104,14 @@ #define CMN_PLL0_LOCK_REFCNT_START 0x009CU #define CMN_PLL0_LOCK_PLLCNT_START 0x009EU #define CMN_PLL0_LOCK_PLLCNT_THR 0x009FU +#define CMN_PLL0_INTDIV_M1 0x00A0U +#define CMN_PLL0_FRACDIVH_M1 0x00A2U +#define CMN_PLL0_HIGH_THR_M1 0x00A3U +#define CMN_PLL0_DSM_DIAG_M1 0x00A4U +#define CMN_PLL0_SS_CTRL1_M1 0x00A8U +#define CMN_PLL0_SS_CTRL2_M1 0x00A9U +#define CMN_PLL0_SS_CTRL3_M1 0x00AAU +#define CMN_PLL0_SS_CTRL4_M1 0x00ABU #define CMN_PLL1_VCOCAL_TCTRL 0x00C2U #define CMN_PLL1_VCOCAL_INIT_TMR 0x00C4U #define CMN_PLL1_VCOCAL_ITER_TMR 0x00C5U @@ -116,8 +129,10 @@ #define CMN_PLL1_LOCK_REFCNT_START 0x00DCU #define CMN_PLL1_LOCK_PLLCNT_START 0x00DEU #define CMN_PLL1_LOCK_PLLCNT_THR 0x00DFU +#define CMN_TXPUCAL_TUNE 0x0103U #define CMN_TXPUCAL_INIT_TMR 0x0104U #define CMN_TXPUCAL_ITER_TMR 0x0105U +#define CMN_TXPDCAL_TUNE 0x010BU #define CMN_TXPDCAL_INIT_TMR 0x010CU #define CMN_TXPDCAL_ITER_TMR 0x010DU #define CMN_RXCAL_INIT_TMR 0x0114U @@ -131,24 +146,31 @@ #define CMN_PDIAG_PLL0_CP_PADJ_M0 0x01A4U #define CMN_PDIAG_PLL0_CP_IADJ_M0 0x01A5U #define CMN_PDIAG_PLL0_FILT_PADJ_M0 0x01A6U +#define CMN_PDIAG_PLL0_CTRL_M1 0x01B0U +#define CMN_PDIAG_PLL0_CLK_SEL_M1 0x01B1U #define CMN_PDIAG_PLL0_CP_PADJ_M1 0x01B4U #define CMN_PDIAG_PLL0_CP_IADJ_M1 0x01B5U +#define CMN_PDIAG_PLL0_FILT_PADJ_M1 0x01B6U #define CMN_PDIAG_PLL1_CTRL_M0 0x01C0U #define CMN_PDIAG_PLL1_CLK_SEL_M0 0x01C1U #define CMN_PDIAG_PLL1_CP_PADJ_M0 0x01C4U #define CMN_PDIAG_PLL1_CP_IADJ_M0 0x01C5U #define CMN_PDIAG_PLL1_FILT_PADJ_M0 0x01C6U +#define CMN_DIAG_BIAS_OVRD1 0x01E1U /* PMA TX Lane registers */ #define TX_TXCC_CTRL 0x0040U #define TX_TXCC_CPOST_MULT_00 0x004CU +#define TX_TXCC_CPOST_MULT_01 0x004DU #define TX_TXCC_MGNFS_MULT_000 0x0050U #define DRV_DIAG_TX_DRV 0x00C6U #define XCVR_DIAG_PLLDRC_CTRL 0x00E5U #define XCVR_DIAG_HSCLK_SEL 0x00E6U #define XCVR_DIAG_HSCLK_DIV 0x00E7U #define XCVR_DIAG_BIDI_CTRL 0x00EAU +#define XCVR_DIAG_PSC_OVRD 0x00EBU #define TX_PSC_A0 0x0100U +#define TX_PSC_A1 0x0101U #define TX_PSC_A2 0x0102U #define TX_PSC_A3 0x0103U #define TX_RCVDET_ST_TMR 0x0123U @@ -157,23 +179,49 @@ /* PMA RX Lane registers */ #define RX_PSC_A0 0x0000U +#define RX_PSC_A1 0x0001U #define RX_PSC_A2 0x0002U #define RX_PSC_A3 0x0003U #define RX_PSC_CAL 0x0006U +#define RX_CDRLF_CNFG 0x0080U +#define RX_CDRLF_CNFG3 0x0082U +#define RX_SIGDET_HL_FILT_TMR 0x0090U #define RX_REE_GCSM1_CTRL 0x0108U +#define RX_REE_GCSM1_EQENM_PH1 0x0109U +#define RX_REE_GCSM1_EQENM_PH2 0x010AU #define RX_REE_GCSM2_CTRL 0x0110U #define RX_REE_PERGCSM_CTRL 0x0118U +#define RX_REE_ATTEN_THR 0x0149U +#define RX_REE_TAP1_CLIP 0x0171U +#define RX_REE_TAP2TON_CLIP 0x0172U +#define RX_REE_SMGM_CTRL1 0x0177U +#define RX_REE_SMGM_CTRL2 0x0178U +#define RX_DIAG_DFE_CTRL 0x01E0U +#define RX_DIAG_DFE_AMP_TUNE_2 0x01E2U +#define RX_DIAG_DFE_AMP_TUNE_3 0x01E3U +#define RX_DIAG_NQST_CTRL 0x01E5U +#define RX_DIAG_SIGDET_TUNE 0x01E8U +#define RX_DIAG_PI_RATE 0x01F4U +#define RX_DIAG_PI_CAP 0x01F5U +#define RX_DIAG_ACYA 0x01FFU /* PHY PCS common registers */ #define PHY_PLL_CFG 0x000EU +#define PHY_PIPE_USB3_GEN2_PRE_CFG0 0x0020U +#define PHY_PIPE_USB3_GEN2_POST_CFG0 0x0022U +#define PHY_PIPE_USB3_GEN2_POST_CFG1 0x0023U /* PHY PMA common registers */ +#define PHY_PMA_CMN_CTRL1 0x0000U #define PHY_PMA_CMN_CTRL2 0x0001U #define PHY_PMA_PLL_RAW_CTRL 0x0003U static const struct reg_field phy_pll_cfg = REG_FIELD(PHY_PLL_CFG, 0, 1); +static const struct reg_field phy_pma_cmn_ctrl_1 = + REG_FIELD(PHY_PMA_CMN_CTRL1, 0, 0); + static const struct reg_field phy_pma_cmn_ctrl_2 = REG_FIELD(PHY_PMA_CMN_CTRL2, 0, 7); @@ -183,14 +231,28 @@ static const struct reg_field phy_pma_pll_raw_ctrl = static const struct reg_field phy_reset_ctrl = REG_FIELD(PHY_RESET, 8, 8); -static const struct of_device_id cdns_torrent_phy_of_match[]; +enum cdns_torrent_phy_type { + TYPE_NONE, + TYPE_DP, + TYPE_PCIE, + TYPE_SGMII, + TYPE_QSGMII, + TYPE_USB, +}; + +enum cdns_torrent_ssc_mode { + NO_SSC, + EXTERNAL_SSC, + INTERNAL_SSC +}; struct cdns_torrent_inst { struct phy *phy; u32 mlane; - u32 phy_type; + enum cdns_torrent_phy_type phy_type; u32 num_lanes; struct reset_control *lnk_rst; + enum cdns_torrent_ssc_mode ssc_mode; }; struct cdns_torrent_phy { @@ -198,11 +260,13 @@ struct cdns_torrent_phy { void __iomem *sd_base; /* SD0801 registers base */ u32 max_bit_rate; /* Maximum link bit rate to use (in Mbps) */ struct reset_control *phy_rst; + struct reset_control *apb_rst; struct device *dev; struct clk *clk; unsigned long ref_clk_rate; struct cdns_torrent_inst phys[MAX_NUM_LANES]; int nsubnodes; + const struct cdns_torrent_data *init_data; struct regmap *regmap; struct regmap *regmap_common_cdb; struct regmap *regmap_phy_pcs_common_cdb; @@ -211,6 +275,7 @@ struct cdns_torrent_phy { struct regmap *regmap_rx_lane_cdb[MAX_NUM_LANES]; struct regmap *regmap_dptx_phy_reg; struct regmap_field *phy_pll_cfg; + struct regmap_field *phy_pma_cmn_ctrl_1; struct regmap_field *phy_pma_cmn_ctrl_2; struct regmap_field *phy_pma_pll_raw_ctrl; struct regmap_field *phy_reset_ctrl; @@ -223,8 +288,8 @@ enum phy_powerstate { POWERSTATE_A3 = 3, }; +static int cdns_torrent_phy_init(struct phy *phy); static int cdns_torrent_dp_init(struct phy *phy); -static int cdns_torrent_dp_exit(struct phy *phy); static int cdns_torrent_dp_run(struct cdns_torrent_phy *cdns_phy, u32 num_lanes); static @@ -254,17 +319,38 @@ static int cdns_torrent_phy_on(struct phy *phy); static int cdns_torrent_phy_off(struct phy *phy); static const struct phy_ops cdns_torrent_phy_ops = { - .init = cdns_torrent_dp_init, - .exit = cdns_torrent_dp_exit, + .init = cdns_torrent_phy_init, .configure = cdns_torrent_dp_configure, .power_on = cdns_torrent_phy_on, .power_off = cdns_torrent_phy_off, .owner = THIS_MODULE, }; +struct cdns_reg_pairs { + u32 val; + u32 off; +}; + +struct cdns_torrent_vals { + struct cdns_reg_pairs *reg_pairs; + u32 num_regs; +}; + struct cdns_torrent_data { - u8 block_offset_shift; - u8 reg_offset_shift; + u8 block_offset_shift; + u8 reg_offset_shift; + struct cdns_torrent_vals *link_cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; + struct cdns_torrent_vals *xcvr_diag_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; + struct cdns_torrent_vals *pcs_cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; + struct cdns_torrent_vals *cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; + struct cdns_torrent_vals *tx_ln_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; + struct cdns_torrent_vals *rx_ln_vals[NUM_PHY_TYPE][NUM_PHY_TYPE] + [NUM_SSC_MODE]; }; struct cdns_regmap_cdb_context { @@ -331,21 +417,21 @@ static int cdns_regmap_dptx_read(void *context, unsigned int reg, .reg_read = cdns_regmap_read, \ } -static struct regmap_config cdns_torrent_tx_lane_cdb_config[] = { +static const struct regmap_config cdns_torrent_tx_lane_cdb_config[] = { TORRENT_TX_LANE_CDB_REGMAP_CONF("0"), TORRENT_TX_LANE_CDB_REGMAP_CONF("1"), TORRENT_TX_LANE_CDB_REGMAP_CONF("2"), TORRENT_TX_LANE_CDB_REGMAP_CONF("3"), }; -static struct regmap_config cdns_torrent_rx_lane_cdb_config[] = { +static const struct regmap_config cdns_torrent_rx_lane_cdb_config[] = { TORRENT_RX_LANE_CDB_REGMAP_CONF("0"), TORRENT_RX_LANE_CDB_REGMAP_CONF("1"), TORRENT_RX_LANE_CDB_REGMAP_CONF("2"), TORRENT_RX_LANE_CDB_REGMAP_CONF("3"), }; -static struct regmap_config cdns_torrent_common_cdb_config = { +static const struct regmap_config cdns_torrent_common_cdb_config = { .name = "torrent_common_cdb", .reg_stride = 1, .fast_io = true, @@ -353,7 +439,7 @@ static struct regmap_config cdns_torrent_common_cdb_config = { .reg_read = cdns_regmap_read, }; -static struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = { +static const struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = { .name = "torrent_phy_pcs_cmn_cdb", .reg_stride = 1, .fast_io = true, @@ -361,7 +447,7 @@ static struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = { .reg_read = cdns_regmap_read, }; -static struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = { +static const struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = { .name = "torrent_phy_pma_cmn_cdb", .reg_stride = 1, .fast_io = true, @@ -369,7 +455,7 @@ static struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = { .reg_read = cdns_regmap_read, }; -static struct regmap_config cdns_torrent_dptx_phy_config = { +static const struct regmap_config cdns_torrent_dptx_phy_config = { .name = "torrent_dptx_phy", .reg_stride = 1, .fast_io = true, @@ -848,19 +934,6 @@ static int cdns_torrent_dp_init(struct phy *phy) struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent); struct regmap *regmap = cdns_phy->regmap_dptx_phy_reg; - ret = clk_prepare_enable(cdns_phy->clk); - if (ret) { - dev_err(cdns_phy->dev, "Failed to prepare ref clock\n"); - return ret; - } - - cdns_phy->ref_clk_rate = clk_get_rate(cdns_phy->clk); - if (!(cdns_phy->ref_clk_rate)) { - dev_err(cdns_phy->dev, "Failed to get ref clock rate\n"); - clk_disable_unprepare(cdns_phy->clk); - return -EINVAL; - } - switch (cdns_phy->ref_clk_rate) { case REF_CLK_19_2MHz: case REF_CLK_25MHz: @@ -920,14 +993,6 @@ static int cdns_torrent_dp_init(struct phy *phy) return ret; } -static int cdns_torrent_dp_exit(struct phy *phy) -{ - struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent); - - clk_disable_unprepare(cdns_phy->clk); - return 0; -} - static int cdns_torrent_dp_wait_pma_cmn_ready(struct cdns_torrent_phy *cdns_phy) { @@ -1543,15 +1608,34 @@ static int cdns_torrent_phy_on(struct phy *phy) { struct cdns_torrent_inst *inst = phy_get_drvdata(phy); struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent); + u32 read_val; int ret; - /* Take the PHY out of reset */ - ret = reset_control_deassert(cdns_phy->phy_rst); - if (ret) + if (cdns_phy->nsubnodes == 1) { + /* Take the PHY lane group out of reset */ + reset_control_deassert(inst->lnk_rst); + + /* Take the PHY out of reset */ + ret = reset_control_deassert(cdns_phy->phy_rst); + if (ret) + return ret; + } + + /* + * Wait for cmn_ready assertion + * PHY_PMA_CMN_CTRL1[0] == 1 + */ + ret = regmap_field_read_poll_timeout(cdns_phy->phy_pma_cmn_ctrl_1, + read_val, read_val, 1000, + PLL_LOCK_TIMEOUT); + if (ret) { + dev_err(cdns_phy->dev, "Timeout waiting for CMN ready\n"); return ret; + } + + mdelay(10); - /* Take the PHY lane group out of reset */ - return reset_control_deassert(inst->lnk_rst); + return 0; } static int cdns_torrent_phy_off(struct phy *phy) @@ -1560,6 +1644,9 @@ static int cdns_torrent_phy_off(struct phy *phy) struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent); int ret; + if (cdns_phy->nsubnodes != 1) + return 0; + ret = reset_control_assert(cdns_phy->phy_rst); if (ret) return ret; @@ -1585,7 +1672,24 @@ static struct regmap *cdns_regmap_init(struct device *dev, void __iomem *base, return devm_regmap_init(dev, NULL, ctx, config); } -static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy) +static int cdns_torrent_dp_regfield_init(struct cdns_torrent_phy *cdns_phy) +{ + struct device *dev = cdns_phy->dev; + struct regmap_field *field; + struct regmap *regmap; + + regmap = cdns_phy->regmap_dptx_phy_reg; + field = devm_regmap_field_alloc(dev, regmap, phy_reset_ctrl); + if (IS_ERR(field)) { + dev_err(dev, "PHY_RESET reg field init failed\n"); + return PTR_ERR(field); + } + cdns_phy->phy_reset_ctrl = field; + + return 0; +} + +static int cdns_torrent_regfield_init(struct cdns_torrent_phy *cdns_phy) { struct device *dev = cdns_phy->dev; struct regmap_field *field; @@ -1600,6 +1704,14 @@ static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy) cdns_phy->phy_pll_cfg = field; regmap = cdns_phy->regmap_phy_pma_common_cdb; + field = devm_regmap_field_alloc(dev, regmap, phy_pma_cmn_ctrl_1); + if (IS_ERR(field)) { + dev_err(dev, "PHY_PMA_CMN_CTRL1 reg field init failed\n"); + return PTR_ERR(field); + } + cdns_phy->phy_pma_cmn_ctrl_1 = field; + + regmap = cdns_phy->regmap_phy_pma_common_cdb; field = devm_regmap_field_alloc(dev, regmap, phy_pma_cmn_ctrl_2); if (IS_ERR(field)) { dev_err(dev, "PHY_PMA_CMN_CTRL2 reg field init failed\n"); @@ -1615,28 +1727,44 @@ static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy) } cdns_phy->phy_pma_pll_raw_ctrl = field; - regmap = cdns_phy->regmap_dptx_phy_reg; - field = devm_regmap_field_alloc(dev, regmap, phy_reset_ctrl); - if (IS_ERR(field)) { - dev_err(dev, "PHY_RESET reg field init failed\n"); - return PTR_ERR(field); + return 0; +} + +static int cdns_torrent_dp_regmap_init(struct cdns_torrent_phy *cdns_phy) +{ + void __iomem *base = cdns_phy->base; + struct device *dev = cdns_phy->dev; + struct regmap *regmap; + u8 reg_offset_shift; + u32 block_offset; + + reg_offset_shift = cdns_phy->init_data->reg_offset_shift; + + block_offset = TORRENT_DPTX_PHY_OFFSET; + regmap = cdns_regmap_init(dev, base, block_offset, + reg_offset_shift, + &cdns_torrent_dptx_phy_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to init DPTX PHY regmap\n"); + return PTR_ERR(regmap); } - cdns_phy->phy_reset_ctrl = field; + cdns_phy->regmap_dptx_phy_reg = regmap; return 0; } -static int cdns_regmap_init_torrent_dp(struct cdns_torrent_phy *cdns_phy, - void __iomem *sd_base, - void __iomem *base, - u8 block_offset_shift, - u8 reg_offset_shift) +static int cdns_torrent_regmap_init(struct cdns_torrent_phy *cdns_phy) { + void __iomem *sd_base = cdns_phy->sd_base; + u8 block_offset_shift, reg_offset_shift; struct device *dev = cdns_phy->dev; struct regmap *regmap; u32 block_offset; int i; + block_offset_shift = cdns_phy->init_data->block_offset_shift; + reg_offset_shift = cdns_phy->init_data->reg_offset_shift; + for (i = 0; i < MAX_NUM_LANES; i++) { block_offset = TORRENT_TX_LANE_CDB_OFFSET(i, block_offset_shift, reg_offset_shift); @@ -1691,43 +1819,282 @@ static int cdns_regmap_init_torrent_dp(struct cdns_torrent_phy *cdns_phy, } cdns_phy->regmap_phy_pma_common_cdb = regmap; - block_offset = TORRENT_DPTX_PHY_OFFSET; - regmap = cdns_regmap_init(dev, base, block_offset, - reg_offset_shift, - &cdns_torrent_dptx_phy_config); - if (IS_ERR(regmap)) { - dev_err(dev, "Failed to init DPTX PHY regmap\n"); - return PTR_ERR(regmap); + return 0; +} + +static int cdns_torrent_phy_init(struct phy *phy) +{ + struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent); + const struct cdns_torrent_data *init_data = cdns_phy->init_data; + struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals; + struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals; + struct cdns_torrent_inst *inst = phy_get_drvdata(phy); + enum cdns_torrent_phy_type phy_type = inst->phy_type; + enum cdns_torrent_ssc_mode ssc = inst->ssc_mode; + struct cdns_torrent_vals *pcs_cmn_vals; + struct cdns_reg_pairs *reg_pairs; + struct regmap *regmap; + u32 num_regs; + int i, j; + + if (cdns_phy->nsubnodes > 1) + return 0; + + if (phy_type == TYPE_DP) + return cdns_torrent_dp_init(phy); + + /** + * Spread spectrum generation is not required or supported + * for SGMII/QSGMII + */ + if (phy_type == TYPE_SGMII || phy_type == TYPE_QSGMII) + ssc = NO_SSC; + + /* PHY configuration specific registers for single link */ + link_cmn_vals = init_data->link_cmn_vals[phy_type][TYPE_NONE][ssc]; + if (link_cmn_vals) { + reg_pairs = link_cmn_vals->reg_pairs; + num_regs = link_cmn_vals->num_regs; + regmap = cdns_phy->regmap_common_cdb; + + /** + * First array value in link_cmn_vals must be of + * PHY_PLL_CFG register + */ + regmap_field_write(cdns_phy->phy_pll_cfg, reg_pairs[0].val); + + for (i = 1; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + xcvr_diag_vals = init_data->xcvr_diag_vals[phy_type][TYPE_NONE][ssc]; + if (xcvr_diag_vals) { + reg_pairs = xcvr_diag_vals->reg_pairs; + num_regs = xcvr_diag_vals->num_regs; + for (i = 0; i < inst->num_lanes; i++) { + regmap = cdns_phy->regmap_tx_lane_cdb[i + inst->mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } + } + + /* PHY PCS common registers configurations */ + pcs_cmn_vals = init_data->pcs_cmn_vals[phy_type][TYPE_NONE][ssc]; + if (pcs_cmn_vals) { + reg_pairs = pcs_cmn_vals->reg_pairs; + num_regs = pcs_cmn_vals->num_regs; + regmap = cdns_phy->regmap_phy_pcs_common_cdb; + for (i = 0; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + /* PMA common registers configurations */ + cmn_vals = init_data->cmn_vals[phy_type][TYPE_NONE][ssc]; + if (cmn_vals) { + reg_pairs = cmn_vals->reg_pairs; + num_regs = cmn_vals->num_regs; + regmap = cdns_phy->regmap_common_cdb; + for (i = 0; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + /* PMA TX lane registers configurations */ + tx_ln_vals = init_data->tx_ln_vals[phy_type][TYPE_NONE][ssc]; + if (tx_ln_vals) { + reg_pairs = tx_ln_vals->reg_pairs; + num_regs = tx_ln_vals->num_regs; + for (i = 0; i < inst->num_lanes; i++) { + regmap = cdns_phy->regmap_tx_lane_cdb[i + inst->mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } + } + + /* PMA RX lane registers configurations */ + rx_ln_vals = init_data->rx_ln_vals[phy_type][TYPE_NONE][ssc]; + if (rx_ln_vals) { + reg_pairs = rx_ln_vals->reg_pairs; + num_regs = rx_ln_vals->num_regs; + for (i = 0; i < inst->num_lanes; i++) { + regmap = cdns_phy->regmap_rx_lane_cdb[i + inst->mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } } - cdns_phy->regmap_dptx_phy_reg = regmap; + + return 0; +} + +static +int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy) +{ + const struct cdns_torrent_data *init_data = cdns_phy->init_data; + struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals; + struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals; + enum cdns_torrent_phy_type phy_t1, phy_t2, tmp_phy_type; + struct cdns_torrent_vals *pcs_cmn_vals; + int i, j, node, mlane, num_lanes, ret; + struct cdns_reg_pairs *reg_pairs; + enum cdns_torrent_ssc_mode ssc; + struct regmap *regmap; + u32 num_regs; + + /* Maximum 2 links (subnodes) are supported */ + if (cdns_phy->nsubnodes != 2) + return -EINVAL; + + phy_t1 = cdns_phy->phys[0].phy_type; + phy_t2 = cdns_phy->phys[1].phy_type; + + /** + * First configure the PHY for first link with phy_t1. Get the array + * values as [phy_t1][phy_t2][ssc]. + */ + for (node = 0; node < cdns_phy->nsubnodes; node++) { + if (node == 1) { + /** + * If first link with phy_t1 is configured, then + * configure the PHY for second link with phy_t2. + * Get the array values as [phy_t2][phy_t1][ssc]. + */ + tmp_phy_type = phy_t1; + phy_t1 = phy_t2; + phy_t2 = tmp_phy_type; + } + + mlane = cdns_phy->phys[node].mlane; + ssc = cdns_phy->phys[node].ssc_mode; + num_lanes = cdns_phy->phys[node].num_lanes; + + /** + * PHY configuration specific registers: + * link_cmn_vals depend on combination of PHY types being + * configured and are common for both PHY types, so array + * values should be same for [phy_t1][phy_t2][ssc] and + * [phy_t2][phy_t1][ssc]. + * xcvr_diag_vals also depend on combination of PHY types + * being configured, but these can be different for particular + * PHY type and are per lane. + */ + link_cmn_vals = init_data->link_cmn_vals[phy_t1][phy_t2][ssc]; + if (link_cmn_vals) { + reg_pairs = link_cmn_vals->reg_pairs; + num_regs = link_cmn_vals->num_regs; + regmap = cdns_phy->regmap_common_cdb; + + /** + * First array value in link_cmn_vals must be of + * PHY_PLL_CFG register + */ + regmap_field_write(cdns_phy->phy_pll_cfg, + reg_pairs[0].val); + + for (i = 1; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + xcvr_diag_vals = init_data->xcvr_diag_vals[phy_t1][phy_t2][ssc]; + if (xcvr_diag_vals) { + reg_pairs = xcvr_diag_vals->reg_pairs; + num_regs = xcvr_diag_vals->num_regs; + for (i = 0; i < num_lanes; i++) { + regmap = cdns_phy->regmap_tx_lane_cdb[i + mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } + } + + /* PHY PCS common registers configurations */ + pcs_cmn_vals = init_data->pcs_cmn_vals[phy_t1][phy_t2][ssc]; + if (pcs_cmn_vals) { + reg_pairs = pcs_cmn_vals->reg_pairs; + num_regs = pcs_cmn_vals->num_regs; + regmap = cdns_phy->regmap_phy_pcs_common_cdb; + for (i = 0; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + /* PMA common registers configurations */ + cmn_vals = init_data->cmn_vals[phy_t1][phy_t2][ssc]; + if (cmn_vals) { + reg_pairs = cmn_vals->reg_pairs; + num_regs = cmn_vals->num_regs; + regmap = cdns_phy->regmap_common_cdb; + for (i = 0; i < num_regs; i++) + regmap_write(regmap, reg_pairs[i].off, + reg_pairs[i].val); + } + + /* PMA TX lane registers configurations */ + tx_ln_vals = init_data->tx_ln_vals[phy_t1][phy_t2][ssc]; + if (tx_ln_vals) { + reg_pairs = tx_ln_vals->reg_pairs; + num_regs = tx_ln_vals->num_regs; + for (i = 0; i < num_lanes; i++) { + regmap = cdns_phy->regmap_tx_lane_cdb[i + mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } + } + + /* PMA RX lane registers configurations */ + rx_ln_vals = init_data->rx_ln_vals[phy_t1][phy_t2][ssc]; + if (rx_ln_vals) { + reg_pairs = rx_ln_vals->reg_pairs; + num_regs = rx_ln_vals->num_regs; + for (i = 0; i < num_lanes; i++) { + regmap = cdns_phy->regmap_rx_lane_cdb[i + mlane]; + for (j = 0; j < num_regs; j++) + regmap_write(regmap, reg_pairs[j].off, + reg_pairs[j].val); + } + } + + reset_control_deassert(cdns_phy->phys[node].lnk_rst); + } + + /* Take the PHY out of reset */ + ret = reset_control_deassert(cdns_phy->phy_rst); + if (ret) + return ret; return 0; } static int cdns_torrent_phy_probe(struct platform_device *pdev) { - struct resource *regs; struct cdns_torrent_phy *cdns_phy; struct device *dev = &pdev->dev; struct phy_provider *phy_provider; - const struct of_device_id *match; - struct cdns_torrent_data *data; + const struct cdns_torrent_data *data; struct device_node *child; int ret, subnodes, node = 0, i; + u32 total_num_lanes = 0; + u8 init_dp_regmap = 0; + u32 phy_type; /* Get init data for this PHY */ - match = of_match_device(cdns_torrent_phy_of_match, dev); - if (!match) + data = of_device_get_match_data(dev); + if (!data) return -EINVAL; - data = (struct cdns_torrent_data *)match->data; - cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL); if (!cdns_phy) return -ENOMEM; dev_set_drvdata(dev, cdns_phy); cdns_phy->dev = dev; + cdns_phy->init_data = data; cdns_phy->phy_rst = devm_reset_control_get_exclusive_by_index(dev, 0); if (IS_ERR(cdns_phy->phy_rst)) { @@ -1736,14 +2103,20 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) return PTR_ERR(cdns_phy->phy_rst); } + cdns_phy->apb_rst = devm_reset_control_get_optional(dev, "torrent_apb"); + if (IS_ERR(cdns_phy->apb_rst)) { + dev_err(dev, "%s: failed to get apb reset\n", + dev->of_node->full_name); + return PTR_ERR(cdns_phy->apb_rst); + } + cdns_phy->clk = devm_clk_get(dev, "refclk"); if (IS_ERR(cdns_phy->clk)) { dev_err(dev, "phy ref clock not found\n"); return PTR_ERR(cdns_phy->clk); } - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - cdns_phy->sd_base = devm_ioremap_resource(&pdev->dev, regs); + cdns_phy->sd_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(cdns_phy->sd_base)) return PTR_ERR(cdns_phy->sd_base); @@ -1751,14 +2124,39 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) if (subnodes == 0) { dev_err(dev, "No available link subnodes found\n"); return -EINVAL; - } else if (subnodes != 1) { - dev_err(dev, "Driver supports only one link subnode.\n"); + } + + ret = cdns_torrent_regmap_init(cdns_phy); + if (ret) + return ret; + + ret = cdns_torrent_regfield_init(cdns_phy); + if (ret) + return ret; + + ret = clk_prepare_enable(cdns_phy->clk); + if (ret) { + dev_err(cdns_phy->dev, "Failed to prepare ref clock\n"); + return ret; + } + + cdns_phy->ref_clk_rate = clk_get_rate(cdns_phy->clk); + if (!(cdns_phy->ref_clk_rate)) { + dev_err(cdns_phy->dev, "Failed to get ref clock rate\n"); + clk_disable_unprepare(cdns_phy->clk); return -EINVAL; } + /* Enable APB */ + reset_control_deassert(cdns_phy->apb_rst); + for_each_available_child_of_node(dev->of_node, child) { struct phy *gphy; + /* PHY subnode name must be 'phy'. */ + if (!(of_node_name_eq(child, "phy"))) + continue; + cdns_phy->phys[node].lnk_rst = of_reset_control_array_get_exclusive(child); if (IS_ERR(cdns_phy->phys[node].lnk_rst)) { @@ -1776,27 +2174,57 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) goto put_child; } - if (cdns_phy->phys[node].mlane != 0) { - dev_err(dev, - "%s: Driver supports only lane-0 as master lane.\n", + if (of_property_read_u32(child, "cdns,phy-type", &phy_type)) { + dev_err(dev, "%s: No \"cdns,phy-type\"-property.\n", child->full_name); ret = -EINVAL; goto put_child; } - if (of_property_read_u32(child, "cdns,phy-type", - &cdns_phy->phys[node].phy_type)) { - dev_err(dev, "%s: No \"cdns,phy-type\"-property.\n", + switch (phy_type) { + case PHY_TYPE_PCIE: + cdns_phy->phys[node].phy_type = TYPE_PCIE; + break; + case PHY_TYPE_DP: + cdns_phy->phys[node].phy_type = TYPE_DP; + break; + case PHY_TYPE_SGMII: + cdns_phy->phys[node].phy_type = TYPE_SGMII; + break; + case PHY_TYPE_QSGMII: + cdns_phy->phys[node].phy_type = TYPE_QSGMII; + break; + case PHY_TYPE_USB3: + cdns_phy->phys[node].phy_type = TYPE_USB; + break; + default: + dev_err(dev, "Unsupported protocol\n"); + ret = -EINVAL; + goto put_child; + } + + if (of_property_read_u32(child, "cdns,num-lanes", + &cdns_phy->phys[node].num_lanes)) { + dev_err(dev, "%s: No \"cdns,num-lanes\"-property.\n", child->full_name); ret = -EINVAL; goto put_child; } - cdns_phy->phys[node].num_lanes = DEFAULT_NUM_LANES; - of_property_read_u32(child, "cdns,num-lanes", - &cdns_phy->phys[node].num_lanes); + total_num_lanes += cdns_phy->phys[node].num_lanes; + + /* Get SSC mode */ + cdns_phy->phys[node].ssc_mode = NO_SSC; + of_property_read_u32(child, "cdns,ssc-mode", + &cdns_phy->phys[node].ssc_mode); + + gphy = devm_phy_create(dev, child, &cdns_torrent_phy_ops); + if (IS_ERR(gphy)) { + ret = PTR_ERR(gphy); + goto put_child; + } - if (cdns_phy->phys[node].phy_type == PHY_TYPE_DP) { + if (cdns_phy->phys[node].phy_type == TYPE_DP) { switch (cdns_phy->phys[node].num_lanes) { case 1: case 2: @@ -1833,30 +2261,34 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) } /* DPTX registers */ - regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - cdns_phy->base = devm_ioremap_resource(&pdev->dev, - regs); + cdns_phy->base = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(cdns_phy->base)) { ret = PTR_ERR(cdns_phy->base); goto put_child; } - gphy = devm_phy_create(dev, child, - &cdns_torrent_phy_ops); - if (IS_ERR(gphy)) { - ret = PTR_ERR(gphy); - goto put_child; + if (!init_dp_regmap) { + ret = cdns_torrent_dp_regmap_init(cdns_phy); + if (ret) + goto put_child; + + ret = cdns_torrent_dp_regfield_init(cdns_phy); + if (ret) + goto put_child; + + init_dp_regmap++; } dev_info(dev, "%d lanes, max bit rate %d.%03d Gbps\n", cdns_phy->phys[node].num_lanes, cdns_phy->max_bit_rate / 1000, cdns_phy->max_bit_rate % 1000); - } else { - dev_err(dev, "Driver supports only PHY_TYPE_DP\n"); - ret = -ENOTSUPP; - goto put_child; + + gphy->attrs.bus_width = cdns_phy->phys[node].num_lanes; + gphy->attrs.max_link_rate = cdns_phy->max_bit_rate; + gphy->attrs.mode = PHY_MODE_DP; } + cdns_phy->phys[node].phy = gphy; phy_set_drvdata(gphy, &cdns_phy->phys[node]); @@ -1864,16 +2296,16 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev) } cdns_phy->nsubnodes = node; - ret = cdns_regmap_init_torrent_dp(cdns_phy, cdns_phy->sd_base, - cdns_phy->base, - data->block_offset_shift, - data->reg_offset_shift); - if (ret) + if (total_num_lanes > MAX_NUM_LANES) { + dev_err(dev, "Invalid lane configuration\n"); goto put_lnk_rst; + } - ret = cdns_regfield_init(cdns_phy); - if (ret) - goto put_lnk_rst; + if (cdns_phy->nsubnodes > 1) { + ret = cdns_torrent_phy_configure_multilink(cdns_phy); + if (ret) + goto put_lnk_rst; + } phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { @@ -1889,6 +2321,8 @@ put_lnk_rst: for (i = 0; i < node; i++) reset_control_put(cdns_phy->phys[i].lnk_rst); of_node_put(child); + reset_control_assert(cdns_phy->apb_rst); + clk_disable_unprepare(cdns_phy->clk); return ret; } @@ -1898,22 +2332,1505 @@ static int cdns_torrent_phy_remove(struct platform_device *pdev) int i; reset_control_assert(cdns_phy->phy_rst); + reset_control_assert(cdns_phy->apb_rst); for (i = 0; i < cdns_phy->nsubnodes; i++) { reset_control_assert(cdns_phy->phys[i].lnk_rst); reset_control_put(cdns_phy->phys[i].lnk_rst); } + clk_disable_unprepare(cdns_phy->clk); + return 0; } +/* USB and SGMII/QSGMII link configuration */ +static struct cdns_reg_pairs usb_sgmii_link_cmn_regs[] = { + {0x0002, PHY_PLL_CFG}, + {0x8600, CMN_PDIAG_PLL0_CLK_SEL_M0}, + {0x0601, CMN_PDIAG_PLL1_CLK_SEL_M0} +}; + +static struct cdns_reg_pairs usb_sgmii_xcvr_diag_ln_regs[] = { + {0x0000, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x0041, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_reg_pairs sgmii_usb_xcvr_diag_ln_regs[] = { + {0x0011, XCVR_DIAG_HSCLK_SEL}, + {0x0003, XCVR_DIAG_HSCLK_DIV}, + {0x009B, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_torrent_vals usb_sgmii_link_cmn_vals = { + .reg_pairs = usb_sgmii_link_cmn_regs, + .num_regs = ARRAY_SIZE(usb_sgmii_link_cmn_regs), +}; + +static struct cdns_torrent_vals usb_sgmii_xcvr_diag_ln_vals = { + .reg_pairs = usb_sgmii_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(usb_sgmii_xcvr_diag_ln_regs), +}; + +static struct cdns_torrent_vals sgmii_usb_xcvr_diag_ln_vals = { + .reg_pairs = sgmii_usb_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(sgmii_usb_xcvr_diag_ln_regs), +}; + +/* PCIe and USB Unique SSC link configuration */ +static struct cdns_reg_pairs pcie_usb_link_cmn_regs[] = { + {0x0003, PHY_PLL_CFG}, + {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0}, + {0x0400, CMN_PDIAG_PLL0_CLK_SEL_M1}, + {0x8600, CMN_PDIAG_PLL1_CLK_SEL_M0} +}; + +static struct cdns_reg_pairs pcie_usb_xcvr_diag_ln_regs[] = { + {0x0000, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x0012, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_reg_pairs usb_pcie_xcvr_diag_ln_regs[] = { + {0x0011, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x00C9, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_torrent_vals pcie_usb_link_cmn_vals = { + .reg_pairs = pcie_usb_link_cmn_regs, + .num_regs = ARRAY_SIZE(pcie_usb_link_cmn_regs), +}; + +static struct cdns_torrent_vals pcie_usb_xcvr_diag_ln_vals = { + .reg_pairs = pcie_usb_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(pcie_usb_xcvr_diag_ln_regs), +}; + +static struct cdns_torrent_vals usb_pcie_xcvr_diag_ln_vals = { + .reg_pairs = usb_pcie_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(usb_pcie_xcvr_diag_ln_regs), +}; + +/* USB 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs usb_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL0_DSM_DIAG_M1}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL0_INTDIV_M1}, + {0x0064, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M1}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL0_HIGH_THR_M1}, + {0x0044, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M1}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M1}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M1}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL0_SS_CTRL3_M1}, + {0x006E, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL0_SS_CTRL4_M1}, + {0x000E, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}, + {0x8200, CMN_CDIAG_CDB_PWRI_OVRD}, + {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD} +}; + +static struct cdns_torrent_vals usb_100_int_ssc_cmn_vals = { + .reg_pairs = usb_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(usb_100_int_ssc_cmn_regs), +}; + +/* Single USB link configuration */ +static struct cdns_reg_pairs sl_usb_link_cmn_regs[] = { + {0x0000, PHY_PLL_CFG}, + {0x8600, CMN_PDIAG_PLL0_CLK_SEL_M0} +}; + +static struct cdns_reg_pairs sl_usb_xcvr_diag_ln_regs[] = { + {0x0000, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x0041, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_torrent_vals sl_usb_link_cmn_vals = { + .reg_pairs = sl_usb_link_cmn_regs, + .num_regs = ARRAY_SIZE(sl_usb_link_cmn_regs), +}; + +static struct cdns_torrent_vals sl_usb_xcvr_diag_ln_vals = { + .reg_pairs = sl_usb_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(sl_usb_xcvr_diag_ln_regs), +}; + +/* USB PHY PCS common configuration */ +static struct cdns_reg_pairs usb_phy_pcs_cmn_regs[] = { + {0x0A0A, PHY_PIPE_USB3_GEN2_PRE_CFG0}, + {0x1000, PHY_PIPE_USB3_GEN2_POST_CFG0}, + {0x0010, PHY_PIPE_USB3_GEN2_POST_CFG1} +}; + +static struct cdns_torrent_vals usb_phy_pcs_cmn_vals = { + .reg_pairs = usb_phy_pcs_cmn_regs, + .num_regs = ARRAY_SIZE(usb_phy_pcs_cmn_regs), +}; + +/* USB 100 MHz Ref clk, no SSC */ +static struct cdns_reg_pairs usb_100_no_ssc_cmn_regs[] = { + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x8200, CMN_CDIAG_CDB_PWRI_OVRD}, + {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD} +}; + +static struct cdns_reg_pairs usb_100_no_ssc_tx_ln_regs[] = { + {0x02FF, TX_PSC_A0}, + {0x06AF, TX_PSC_A1}, + {0x06AE, TX_PSC_A2}, + {0x06AE, TX_PSC_A3}, + {0x2A82, TX_TXCC_CTRL}, + {0x0014, TX_TXCC_CPOST_MULT_01}, + {0x0003, XCVR_DIAG_PSC_OVRD} +}; + +static struct cdns_reg_pairs usb_100_no_ssc_rx_ln_regs[] = { + {0x0D1D, RX_PSC_A0}, + {0x0D1D, RX_PSC_A1}, + {0x0D00, RX_PSC_A2}, + {0x0500, RX_PSC_A3}, + {0x0013, RX_SIGDET_HL_FILT_TMR}, + {0x0000, RX_REE_GCSM1_CTRL}, + {0x0C02, RX_REE_ATTEN_THR}, + {0x0330, RX_REE_SMGM_CTRL1}, + {0x0300, RX_REE_SMGM_CTRL2}, + {0x0019, RX_REE_TAP1_CLIP}, + {0x0019, RX_REE_TAP2TON_CLIP}, + {0x1004, RX_DIAG_SIGDET_TUNE}, + {0x00F9, RX_DIAG_NQST_CTRL}, + {0x0C01, RX_DIAG_DFE_AMP_TUNE_2}, + {0x0002, RX_DIAG_DFE_AMP_TUNE_3}, + {0x0000, RX_DIAG_PI_CAP}, + {0x0031, RX_DIAG_PI_RATE}, + {0x0001, RX_DIAG_ACYA}, + {0x018C, RX_CDRLF_CNFG}, + {0x0003, RX_CDRLF_CNFG3} +}; + +static struct cdns_torrent_vals usb_100_no_ssc_cmn_vals = { + .reg_pairs = usb_100_no_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(usb_100_no_ssc_cmn_regs), +}; + +static struct cdns_torrent_vals usb_100_no_ssc_tx_ln_vals = { + .reg_pairs = usb_100_no_ssc_tx_ln_regs, + .num_regs = ARRAY_SIZE(usb_100_no_ssc_tx_ln_regs), +}; + +static struct cdns_torrent_vals usb_100_no_ssc_rx_ln_vals = { + .reg_pairs = usb_100_no_ssc_rx_ln_regs, + .num_regs = ARRAY_SIZE(usb_100_no_ssc_rx_ln_regs), +}; + +/* Single link USB, 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs sl_usb_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0064, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0044, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x006E, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x000E, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}, + {0x8200, CMN_CDIAG_CDB_PWRI_OVRD}, + {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD} +}; + +static struct cdns_torrent_vals sl_usb_100_int_ssc_cmn_vals = { + .reg_pairs = sl_usb_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(sl_usb_100_int_ssc_cmn_regs), +}; + +/* PCIe and SGMII/QSGMII Unique SSC link configuration */ +static struct cdns_reg_pairs pcie_sgmii_link_cmn_regs[] = { + {0x0003, PHY_PLL_CFG}, + {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0}, + {0x0400, CMN_PDIAG_PLL0_CLK_SEL_M1}, + {0x0601, CMN_PDIAG_PLL1_CLK_SEL_M0} +}; + +static struct cdns_reg_pairs pcie_sgmii_xcvr_diag_ln_regs[] = { + {0x0000, XCVR_DIAG_HSCLK_SEL}, + {0x0001, XCVR_DIAG_HSCLK_DIV}, + {0x0012, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_reg_pairs sgmii_pcie_xcvr_diag_ln_regs[] = { + {0x0011, XCVR_DIAG_HSCLK_SEL}, + {0x0003, XCVR_DIAG_HSCLK_DIV}, + {0x009B, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_torrent_vals pcie_sgmii_link_cmn_vals = { + .reg_pairs = pcie_sgmii_link_cmn_regs, + .num_regs = ARRAY_SIZE(pcie_sgmii_link_cmn_regs), +}; + +static struct cdns_torrent_vals pcie_sgmii_xcvr_diag_ln_vals = { + .reg_pairs = pcie_sgmii_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(pcie_sgmii_xcvr_diag_ln_regs), +}; + +static struct cdns_torrent_vals sgmii_pcie_xcvr_diag_ln_vals = { + .reg_pairs = sgmii_pcie_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(sgmii_pcie_xcvr_diag_ln_regs), +}; + +/* SGMII 100 MHz Ref clk, no SSC */ +static struct cdns_reg_pairs sgmii_100_no_ssc_cmn_regs[] = { + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x3700, CMN_DIAG_BIAS_OVRD1}, + {0x0008, CMN_TXPUCAL_TUNE}, + {0x0008, CMN_TXPDCAL_TUNE} +}; + +static struct cdns_reg_pairs sgmii_100_no_ssc_tx_ln_regs[] = { + {0x00F3, TX_PSC_A0}, + {0x04A2, TX_PSC_A2}, + {0x04A2, TX_PSC_A3}, + {0x0000, TX_TXCC_CPOST_MULT_00}, + {0x00B3, DRV_DIAG_TX_DRV} +}; + +static struct cdns_reg_pairs sgmii_100_no_ssc_rx_ln_regs[] = { + {0x091D, RX_PSC_A0}, + {0x0900, RX_PSC_A2}, + {0x0100, RX_PSC_A3}, + {0x03C7, RX_REE_GCSM1_EQENM_PH1}, + {0x01C7, RX_REE_GCSM1_EQENM_PH2}, + {0x0000, RX_DIAG_DFE_CTRL}, + {0x0019, RX_REE_TAP1_CLIP}, + {0x0019, RX_REE_TAP2TON_CLIP}, + {0x0098, RX_DIAG_NQST_CTRL}, + {0x0C01, RX_DIAG_DFE_AMP_TUNE_2}, + {0x0000, RX_DIAG_DFE_AMP_TUNE_3}, + {0x0000, RX_DIAG_PI_CAP}, + {0x0010, RX_DIAG_PI_RATE}, + {0x0001, RX_DIAG_ACYA}, + {0x018C, RX_CDRLF_CNFG}, +}; + +static struct cdns_torrent_vals sgmii_100_no_ssc_cmn_vals = { + .reg_pairs = sgmii_100_no_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_cmn_regs), +}; + +static struct cdns_torrent_vals sgmii_100_no_ssc_tx_ln_vals = { + .reg_pairs = sgmii_100_no_ssc_tx_ln_regs, + .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_tx_ln_regs), +}; + +static struct cdns_torrent_vals sgmii_100_no_ssc_rx_ln_vals = { + .reg_pairs = sgmii_100_no_ssc_rx_ln_regs, + .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_rx_ln_regs), +}; + +/* SGMII 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs sgmii_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL0_DSM_DIAG_M1}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL0_INTDIV_M1}, + {0x0064, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M1}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL0_HIGH_THR_M1}, + {0x0044, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M1}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M1}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M1}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL0_SS_CTRL3_M1}, + {0x006E, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL0_SS_CTRL4_M1}, + {0x000E, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}, + {0x3700, CMN_DIAG_BIAS_OVRD1}, + {0x0008, CMN_TXPUCAL_TUNE}, + {0x0008, CMN_TXPDCAL_TUNE} +}; + +static struct cdns_torrent_vals sgmii_100_int_ssc_cmn_vals = { + .reg_pairs = sgmii_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(sgmii_100_int_ssc_cmn_regs), +}; + +/* QSGMII 100 MHz Ref clk, no SSC */ +static struct cdns_reg_pairs qsgmii_100_no_ssc_cmn_regs[] = { + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL} +}; + +static struct cdns_reg_pairs qsgmii_100_no_ssc_tx_ln_regs[] = { + {0x00F3, TX_PSC_A0}, + {0x04A2, TX_PSC_A2}, + {0x04A2, TX_PSC_A3}, + {0x0000, TX_TXCC_CPOST_MULT_00}, + {0x0003, DRV_DIAG_TX_DRV} +}; + +static struct cdns_reg_pairs qsgmii_100_no_ssc_rx_ln_regs[] = { + {0x091D, RX_PSC_A0}, + {0x0900, RX_PSC_A2}, + {0x0100, RX_PSC_A3}, + {0x03C7, RX_REE_GCSM1_EQENM_PH1}, + {0x01C7, RX_REE_GCSM1_EQENM_PH2}, + {0x0000, RX_DIAG_DFE_CTRL}, + {0x0019, RX_REE_TAP1_CLIP}, + {0x0019, RX_REE_TAP2TON_CLIP}, + {0x0098, RX_DIAG_NQST_CTRL}, + {0x0C01, RX_DIAG_DFE_AMP_TUNE_2}, + {0x0000, RX_DIAG_DFE_AMP_TUNE_3}, + {0x0000, RX_DIAG_PI_CAP}, + {0x0010, RX_DIAG_PI_RATE}, + {0x0001, RX_DIAG_ACYA}, + {0x018C, RX_CDRLF_CNFG}, +}; + +static struct cdns_torrent_vals qsgmii_100_no_ssc_cmn_vals = { + .reg_pairs = qsgmii_100_no_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_cmn_regs), +}; + +static struct cdns_torrent_vals qsgmii_100_no_ssc_tx_ln_vals = { + .reg_pairs = qsgmii_100_no_ssc_tx_ln_regs, + .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_tx_ln_regs), +}; + +static struct cdns_torrent_vals qsgmii_100_no_ssc_rx_ln_vals = { + .reg_pairs = qsgmii_100_no_ssc_rx_ln_regs, + .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_rx_ln_regs), +}; + +/* QSGMII 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs qsgmii_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL0_DSM_DIAG_M1}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL0_INTDIV_M1}, + {0x0064, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M1}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL0_HIGH_THR_M1}, + {0x0044, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M1}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M1}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M1}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL0_SS_CTRL3_M1}, + {0x006E, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL0_SS_CTRL4_M1}, + {0x000E, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR} +}; + +static struct cdns_torrent_vals qsgmii_100_int_ssc_cmn_vals = { + .reg_pairs = qsgmii_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(qsgmii_100_int_ssc_cmn_regs), +}; + +/* Single SGMII/QSGMII link configuration */ +static struct cdns_reg_pairs sl_sgmii_link_cmn_regs[] = { + {0x0000, PHY_PLL_CFG}, + {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0} +}; + +static struct cdns_reg_pairs sl_sgmii_xcvr_diag_ln_regs[] = { + {0x0000, XCVR_DIAG_HSCLK_SEL}, + {0x0003, XCVR_DIAG_HSCLK_DIV}, + {0x0013, XCVR_DIAG_PLLDRC_CTRL} +}; + +static struct cdns_torrent_vals sl_sgmii_link_cmn_vals = { + .reg_pairs = sl_sgmii_link_cmn_regs, + .num_regs = ARRAY_SIZE(sl_sgmii_link_cmn_regs), +}; + +static struct cdns_torrent_vals sl_sgmii_xcvr_diag_ln_vals = { + .reg_pairs = sl_sgmii_xcvr_diag_ln_regs, + .num_regs = ARRAY_SIZE(sl_sgmii_xcvr_diag_ln_regs), +}; + +/* Multi link PCIe, 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs pcie_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL0_DSM_DIAG_M1}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL0_INTDIV_M1}, + {0x0064, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M1}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL0_HIGH_THR_M1}, + {0x0044, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M1}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M1}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M1}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL0_SS_CTRL3_M1}, + {0x006E, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL0_SS_CTRL4_M1}, + {0x000E, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR} +}; + +static struct cdns_torrent_vals pcie_100_int_ssc_cmn_vals = { + .reg_pairs = pcie_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(pcie_100_int_ssc_cmn_regs), +}; + +/* Single link PCIe, 100 MHz Ref clk, internal SSC */ +static struct cdns_reg_pairs sl_pcie_100_int_ssc_cmn_regs[] = { + {0x0004, CMN_PLL0_DSM_DIAG_M0}, + {0x0004, CMN_PLL0_DSM_DIAG_M1}, + {0x0004, CMN_PLL1_DSM_DIAG_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0}, + {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1}, + {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0}, + {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1}, + {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0}, + {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1}, + {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0}, + {0x0064, CMN_PLL0_INTDIV_M0}, + {0x0050, CMN_PLL0_INTDIV_M1}, + {0x0050, CMN_PLL1_INTDIV_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M0}, + {0x0002, CMN_PLL0_FRACDIVH_M1}, + {0x0002, CMN_PLL1_FRACDIVH_M0}, + {0x0044, CMN_PLL0_HIGH_THR_M0}, + {0x0036, CMN_PLL0_HIGH_THR_M1}, + {0x0036, CMN_PLL1_HIGH_THR_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M0}, + {0x0002, CMN_PDIAG_PLL0_CTRL_M1}, + {0x0002, CMN_PDIAG_PLL1_CTRL_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M0}, + {0x0001, CMN_PLL0_SS_CTRL1_M1}, + {0x0001, CMN_PLL1_SS_CTRL1_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M0}, + {0x011B, CMN_PLL0_SS_CTRL2_M1}, + {0x011B, CMN_PLL1_SS_CTRL2_M0}, + {0x006E, CMN_PLL0_SS_CTRL3_M0}, + {0x0058, CMN_PLL0_SS_CTRL3_M1}, + {0x0058, CMN_PLL1_SS_CTRL3_M0}, + {0x000E, CMN_PLL0_SS_CTRL4_M0}, + {0x0012, CMN_PLL0_SS_CTRL4_M1}, + {0x0012, CMN_PLL1_SS_CTRL4_M0}, + {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START}, + {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START}, + {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START}, + {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START}, + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL}, + {0x00C7, CMN_PLL0_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL1_LOCK_REFCNT_START}, + {0x00C7, CMN_PLL0_LOCK_PLLCNT_START}, + {0x00C7, CMN_PLL1_LOCK_PLLCNT_START}, + {0x0005, CMN_PLL0_LOCK_PLLCNT_THR}, + {0x0005, CMN_PLL1_LOCK_PLLCNT_THR} +}; + +static struct cdns_torrent_vals sl_pcie_100_int_ssc_cmn_vals = { + .reg_pairs = sl_pcie_100_int_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(sl_pcie_100_int_ssc_cmn_regs), +}; + +/* PCIe, 100 MHz Ref clk, no SSC & external SSC */ +static struct cdns_reg_pairs pcie_100_ext_no_ssc_cmn_regs[] = { + {0x0003, CMN_PLL0_VCOCAL_TCTRL}, + {0x0003, CMN_PLL1_VCOCAL_TCTRL} +}; + +static struct cdns_reg_pairs pcie_100_ext_no_ssc_rx_ln_regs[] = { + {0x0019, RX_REE_TAP1_CLIP}, + {0x0019, RX_REE_TAP2TON_CLIP}, + {0x0001, RX_DIAG_ACYA} +}; + +static struct cdns_torrent_vals pcie_100_no_ssc_cmn_vals = { + .reg_pairs = pcie_100_ext_no_ssc_cmn_regs, + .num_regs = ARRAY_SIZE(pcie_100_ext_no_ssc_cmn_regs), +}; + +static struct cdns_torrent_vals pcie_100_no_ssc_rx_ln_vals = { + .reg_pairs = pcie_100_ext_no_ssc_rx_ln_regs, + .num_regs = ARRAY_SIZE(pcie_100_ext_no_ssc_rx_ln_regs), +}; + static const struct cdns_torrent_data cdns_map_torrent = { .block_offset_shift = 0x2, .reg_offset_shift = 0x2, + .link_cmn_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_usb_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals, + [INTERNAL_SSC] = &pcie_usb_link_cmn_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_usb_link_cmn_vals, + [EXTERNAL_SSC] = &sl_usb_link_cmn_vals, + [INTERNAL_SSC] = &sl_usb_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_usb_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals, + [INTERNAL_SSC] = &pcie_usb_link_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + }, + .xcvr_diag_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + }, + }, + }, + .pcs_cmn_vals = { + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + }, + }, + .cmn_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_pcie_100_int_ssc_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sgmii_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &qsgmii_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &usb_100_int_ssc_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + }, + }, + .tx_ln_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_QSGMII] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_USB] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + }, + }, + .rx_ln_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + }, + }, }; static const struct cdns_torrent_data ti_j721e_map_torrent = { .block_offset_shift = 0x0, .reg_offset_shift = 0x1, + .link_cmn_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_usb_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals, + [INTERNAL_SSC] = &pcie_usb_link_cmn_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_usb_link_cmn_vals, + [EXTERNAL_SSC] = &sl_usb_link_cmn_vals, + [INTERNAL_SSC] = &sl_usb_link_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &pcie_usb_link_cmn_vals, + [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals, + [INTERNAL_SSC] = &pcie_usb_link_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_sgmii_link_cmn_vals, + [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals, + }, + }, + }, + .xcvr_diag_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &sl_usb_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_pcie_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals, + }, + }, + }, + .pcs_cmn_vals = { + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_phy_pcs_cmn_vals, + [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals, + }, + }, + }, + .cmn_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_pcie_100_int_ssc_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sgmii_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &qsgmii_100_int_ssc_cmn_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &usb_100_int_ssc_cmn_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_cmn_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals, + [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals, + }, + }, + }, + .tx_ln_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_SGMII] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_QSGMII] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + [TYPE_USB] = { + [NO_SSC] = NULL, + [EXTERNAL_SSC] = NULL, + [INTERNAL_SSC] = NULL, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_tx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals, + }, + }, + }, + .rx_ln_vals = { + [TYPE_PCIE] = { + [TYPE_NONE] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_SGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_QSGMII] = { + [TYPE_NONE] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + [TYPE_USB] = { + [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals, + }, + }, + [TYPE_USB] = { + [TYPE_NONE] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_PCIE] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_SGMII] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + [TYPE_QSGMII] = { + [NO_SSC] = &usb_100_no_ssc_rx_ln_vals, + [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals, + }, + }, + }, }; static const struct of_device_id cdns_torrent_phy_of_match[] = { diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c index 0c4833da7be0..62d6d6849ad6 100644 --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -1,15 +1,20 @@ // SPDX-License-Identifier: GPL-2.0+ /* Copyright (c) 2017 NXP. */ +#include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) +#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) +#define PHY_CTRL0_FSEL_24M 0x2a #define PHY_CTRL1 0x4 #define PHY_CTRL1_RESET BIT(0) @@ -20,6 +25,11 @@ #define PHY_CTRL2 0x8 #define PHY_CTRL2_TXENABLEN0 BIT(8) +#define PHY_CTRL2_OTG_DISABLE BIT(9) + +#define PHY_CTRL6 0x18 +#define PHY_CTRL6_ALT_CLK_EN BIT(1) +#define PHY_CTRL6_ALT_CLK_SEL BIT(0) struct imx8mq_usb_phy { struct phy *phy; @@ -54,6 +64,44 @@ static int imx8mq_usb_phy_init(struct phy *phy) return 0; } +static int imx8mp_usb_phy_init(struct phy *phy) +{ + struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + u32 value; + + /* USB3.0 PHY signal fsel for 24M ref */ + value = readl(imx_phy->base + PHY_CTRL0); + value &= ~PHY_CTRL0_FSEL_MASK; + value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M); + writel(value, imx_phy->base + PHY_CTRL0); + + /* Disable alt_clk_en and use internal MPLL clocks */ + value = readl(imx_phy->base + PHY_CTRL6); + value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN); + writel(value, imx_phy->base + PHY_CTRL6); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0); + value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; + writel(value, imx_phy->base + PHY_CTRL1); + + value = readl(imx_phy->base + PHY_CTRL0); + value |= PHY_CTRL0_REF_SSP_EN; + writel(value, imx_phy->base + PHY_CTRL0); + + value = readl(imx_phy->base + PHY_CTRL2); + value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE; + writel(value, imx_phy->base + PHY_CTRL2); + + udelay(10); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); + writel(value, imx_phy->base + PHY_CTRL1); + + return 0; +} + static int imx8mq_phy_power_on(struct phy *phy) { struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); @@ -76,19 +124,36 @@ static int imx8mq_phy_power_off(struct phy *phy) return 0; } -static struct phy_ops imx8mq_usb_phy_ops = { +static const struct phy_ops imx8mq_usb_phy_ops = { .init = imx8mq_usb_phy_init, .power_on = imx8mq_phy_power_on, .power_off = imx8mq_phy_power_off, .owner = THIS_MODULE, }; +static struct phy_ops imx8mp_usb_phy_ops = { + .init = imx8mp_usb_phy_init, + .power_on = imx8mq_phy_power_on, + .power_off = imx8mq_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id imx8mq_usb_phy_of_match[] = { + {.compatible = "fsl,imx8mq-usb-phy", + .data = &imx8mq_usb_phy_ops,}, + {.compatible = "fsl,imx8mp-usb-phy", + .data = &imx8mp_usb_phy_ops,}, + { } +}; +MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); + static int imx8mq_usb_phy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct device *dev = &pdev->dev; struct imx8mq_usb_phy *imx_phy; struct resource *res; + const struct phy_ops *phy_ops; imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); if (!imx_phy) @@ -105,7 +170,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(imx_phy->base)) return PTR_ERR(imx_phy->base); - imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops); + phy_ops = of_device_get_match_data(dev); + if (!phy_ops) + return -EINVAL; + + imx_phy->phy = devm_phy_create(dev, NULL, phy_ops); if (IS_ERR(imx_phy->phy)) return PTR_ERR(imx_phy->phy); @@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } -static const struct of_device_id imx8mq_usb_phy_of_match[] = { - {.compatible = "fsl,imx8mq-usb-phy",}, - { }, -}; -MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); - static struct platform_driver imx8mq_usb_phy_driver = { .probe = imx8mq_usb_phy_probe, .driver = { diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c index cc0af2c044d0..84adce9b4277 100644 --- a/drivers/phy/hisilicon/phy-hi3660-usb3.c +++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c @@ -161,7 +161,7 @@ out: return ret; } -static struct phy_ops hi3660_phy_ops = { +static const struct phy_ops hi3660_phy_ops = { .init = hi3660_phy_init, .exit = hi3660_phy_exit, .owner = THIS_MODULE, diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig index 7b47682a4e0e..58ec695c92ec 100644 --- a/drivers/phy/intel/Kconfig +++ b/drivers/phy/intel/Kconfig @@ -1,9 +1,21 @@ # SPDX-License-Identifier: GPL-2.0 # -# Phy drivers for Intel Lightning Mountain(LGM) platform +# Phy drivers for Intel platforms # -config PHY_INTEL_COMBO - bool "Intel ComboPHY driver" +config PHY_INTEL_KEEMBAY_EMMC + tristate "Intel Keem Bay EMMC PHY driver" + depends on (OF && ARM64) || COMPILE_TEST + depends on HAS_IOMEM + select GENERIC_PHY + select REGMAP_MMIO + help + Choose this option if you have an Intel Keem Bay SoC. + + To compile this driver as a module, choose M here: the module + will be called phy-keembay-emmc.ko. + +config PHY_INTEL_LGM_COMBO + bool "Intel Lightning Mountain ComboPHY driver" depends on X86 || COMPILE_TEST depends on OF && HAS_IOMEM select MFD_SYSCON @@ -16,8 +28,8 @@ config PHY_INTEL_COMBO chipsets which provides PHYs for various controllers, EMAC, SATA and PCIe. -config PHY_INTEL_EMMC - tristate "Intel EMMC PHY driver" +config PHY_INTEL_LGM_EMMC + tristate "Intel Lightning Mountain EMMC PHY driver" depends on X86 || COMPILE_TEST select GENERIC_PHY help diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile index 233d530dadde..a5e0af5ccd75 100644 --- a/drivers/phy/intel/Makefile +++ b/drivers/phy/intel/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PHY_INTEL_COMBO) += phy-intel-combo.o -obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o +obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o +obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o +obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c new file mode 100644 index 000000000000..eb7c635ed89a --- /dev/null +++ b/drivers/phy/intel/phy-intel-keembay-emmc.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel Keem Bay eMMC PHY driver + * Copyright (C) 2020 Intel Corporation + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* eMMC/SD/SDIO core/phy configuration registers */ +#define PHY_CFG_0 0x24 +#define SEL_DLY_TXCLK_MASK BIT(29) +#define OTAP_DLY_ENA_MASK BIT(27) +#define OTAP_DLY_SEL_MASK GENMASK(26, 23) +#define DLL_EN_MASK BIT(10) +#define PWR_DOWN_MASK BIT(0) + +#define PHY_CFG_2 0x2c +#define SEL_FREQ_MASK GENMASK(12, 10) + +#define PHY_STAT 0x40 +#define CAL_DONE_MASK BIT(6) +#define IS_CALDONE(x) ((x) & CAL_DONE_MASK) +#define DLL_RDY_MASK BIT(5) +#define IS_DLLRDY(x) ((x) & DLL_RDY_MASK) + +/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */ +#define FREQSEL_200M_170M 0x0 +#define FREQSEL_170M_140M 0x1 +#define FREQSEL_140M_110M 0x2 +#define FREQSEL_110M_80M 0x3 +#define FREQSEL_80M_50M 0x4 + +struct keembay_emmc_phy { + struct regmap *syscfg; + struct clk *emmcclk; +}; + +static const struct regmap_config keembay_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int keembay_emmc_phy_power(struct phy *phy, bool on_off) +{ + struct keembay_emmc_phy *priv = phy_get_drvdata(phy); + unsigned int caldone; + unsigned int dllrdy; + unsigned int freqsel; + unsigned int mhz; + int ret; + + /* + * Keep phyctrl_pdb and phyctrl_endll low to allow + * initialization of CALIO state M/C DFFs + */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK, + FIELD_PREP(PWR_DOWN_MASK, 0)); + if (ret) { + dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK, + FIELD_PREP(DLL_EN_MASK, 0)); + if (ret) { + dev_err(&phy->dev, "turn off the dll failed: %d\n", ret); + return ret; + } + + /* Already finish power off above */ + if (!on_off) + return 0; + + mhz = DIV_ROUND_CLOSEST(clk_get_rate(priv->emmcclk), 1000000); + if (mhz <= 200 && mhz >= 170) + freqsel = FREQSEL_200M_170M; + else if (mhz <= 170 && mhz >= 140) + freqsel = FREQSEL_170M_140M; + else if (mhz <= 140 && mhz >= 110) + freqsel = FREQSEL_140M_110M; + else if (mhz <= 110 && mhz >= 80) + freqsel = FREQSEL_110M_80M; + else if (mhz <= 80 && mhz >= 50) + freqsel = FREQSEL_80M_50M; + else + freqsel = 0x0; + + if (mhz < 50 || mhz > 200) + dev_warn(&phy->dev, "Unsupported rate: %d MHz\n", mhz); + + /* + * According to the user manual, calpad calibration + * cycle takes more than 2us without the minimal recommended + * value, so we may need a little margin here + */ + udelay(5); + + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK, + FIELD_PREP(PWR_DOWN_MASK, 1)); + if (ret) { + dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret); + return ret; + } + + /* + * According to the user manual, it asks driver to wait 5us for + * calpad busy trimming. However it is documented that this value is + * PVT(A.K.A. process, voltage and temperature) relevant, so some + * failure cases are found which indicates we should be more tolerant + * to calpad busy trimming. + */ + ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT, + caldone, IS_CALDONE(caldone), + 0, 50); + if (ret) { + dev_err(&phy->dev, "caldone failed, ret=%d\n", ret); + return ret; + } + + /* Set the frequency of the DLL operation */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_2, SEL_FREQ_MASK, + FIELD_PREP(SEL_FREQ_MASK, freqsel)); + if (ret) { + dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret); + return ret; + } + + /* Turn on the DLL */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK, + FIELD_PREP(DLL_EN_MASK, 1)); + if (ret) { + dev_err(&phy->dev, "turn on the dll failed: %d\n", ret); + return ret; + } + + /* + * We turned on the DLL even though the rate was 0 because we the + * clock might be turned on later. ...but we can't wait for the DLL + * to lock when the rate is 0 because it will never lock with no + * input clock. + * + * Technically we should be checking the lock later when the clock + * is turned on, but for now we won't. + */ + if (mhz == 0) + return 0; + + /* + * After enabling analog DLL circuits docs say that we need 10.2 us if + * our source clock is at 50 MHz and that lock time scales linearly + * with clock speed. If we are powering on the PHY and the card clock + * is super slow (like 100kHz) this could take as long as 5.1 ms as + * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms + * hopefully we won't be running at 100 kHz, but we should still make + * sure we wait long enough. + * + * NOTE: There appear to be corner cases where the DLL seems to take + * extra long to lock for reasons that aren't understood. In some + * extreme cases we've seen it take up to over 10ms (!). We'll be + * generous and give it 50ms. + */ + ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT, + dllrdy, IS_DLLRDY(dllrdy), + 0, 50 * USEC_PER_MSEC); + if (ret) + dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret); + + return ret; +} + +static int keembay_emmc_phy_init(struct phy *phy) +{ + struct keembay_emmc_phy *priv = phy_get_drvdata(phy); + + /* + * We purposely get the clock here and not in probe to avoid the + * circular dependency problem. We expect: + * - PHY driver to probe + * - SDHCI driver to start probe + * - SDHCI driver to register it's clock + * - SDHCI driver to get the PHY + * - SDHCI driver to init the PHY + * + * The clock is optional, so upon any error just return it like + * any other error to user. + */ + priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk"); + + return PTR_ERR_OR_ZERO(priv->emmcclk); +} + +static int keembay_emmc_phy_exit(struct phy *phy) +{ + struct keembay_emmc_phy *priv = phy_get_drvdata(phy); + + clk_put(priv->emmcclk); + + return 0; +}; + +static int keembay_emmc_phy_power_on(struct phy *phy) +{ + struct keembay_emmc_phy *priv = phy_get_drvdata(phy); + int ret; + + /* Delay chain based txclk: enable */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, SEL_DLY_TXCLK_MASK, + FIELD_PREP(SEL_DLY_TXCLK_MASK, 1)); + if (ret) { + dev_err(&phy->dev, "ERROR: delay chain txclk set: %d\n", ret); + return ret; + } + + /* Output tap delay: enable */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_ENA_MASK, + FIELD_PREP(OTAP_DLY_ENA_MASK, 1)); + if (ret) { + dev_err(&phy->dev, "ERROR: output tap delay set: %d\n", ret); + return ret; + } + + /* Output tap delay */ + ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_SEL_MASK, + FIELD_PREP(OTAP_DLY_SEL_MASK, 2)); + if (ret) { + dev_err(&phy->dev, "ERROR: output tap delay select: %d\n", ret); + return ret; + } + + /* Power up eMMC phy analog blocks */ + return keembay_emmc_phy_power(phy, true); +} + +static int keembay_emmc_phy_power_off(struct phy *phy) +{ + /* Power down eMMC phy analog blocks */ + return keembay_emmc_phy_power(phy, false); +} + +static const struct phy_ops ops = { + .init = keembay_emmc_phy_init, + .exit = keembay_emmc_phy_exit, + .power_on = keembay_emmc_phy_power_on, + .power_off = keembay_emmc_phy_power_off, + .owner = THIS_MODULE, +}; + +static int keembay_emmc_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct keembay_emmc_phy *priv; + struct phy *generic_phy; + struct phy_provider *phy_provider; + void __iomem *base; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->syscfg = devm_regmap_init_mmio(dev, base, &keembay_regmap_config); + if (IS_ERR(priv->syscfg)) + return PTR_ERR(priv->syscfg); + + generic_phy = devm_phy_create(dev, np, &ops); + if (IS_ERR(generic_phy)) + return dev_err_probe(dev, PTR_ERR(generic_phy), + "failed to create PHY\n"); + + phy_set_drvdata(generic_phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id keembay_emmc_phy_dt_ids[] = { + { .compatible = "intel,keembay-emmc-phy" }, + {} +}; +MODULE_DEVICE_TABLE(of, keembay_emmc_phy_dt_ids); + +static struct platform_driver keembay_emmc_phy_driver = { + .probe = keembay_emmc_phy_probe, + .driver = { + .name = "keembay-emmc-phy", + .of_match_table = keembay_emmc_phy_dt_ids, + }, +}; +module_platform_driver(keembay_emmc_phy_driver); + +MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>"); +MODULE_DESCRIPTION("Intel Keem Bay eMMC PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c index 360b1eb2ebd6..360b1eb2ebd6 100644 --- a/drivers/phy/intel/phy-intel-combo.c +++ b/drivers/phy/intel/phy-intel-lgm-combo.c diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c index 703aeb122541..703aeb122541 100644 --- a/drivers/phy/intel/phy-intel-emmc.c +++ b/drivers/phy/intel/phy-intel-lgm-emmc.c diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c index be09b1530ae6..a7d126192cf1 100644 --- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c +++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c @@ -141,7 +141,7 @@ static int ltq_rcu_usb2_phy_power_off(struct phy *phy) return 0; } -static struct phy_ops ltq_rcu_usb2_phy_ops = { +static const struct phy_ops ltq_rcu_usb2_phy_ops = { .init = ltq_rcu_usb2_phy_init, .power_on = ltq_rcu_usb2_phy_power_on, .power_off = ltq_rcu_usb2_phy_power_off, diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c index 2ff9a48d833e..22c5698123cf 100644 --- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c +++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c @@ -349,7 +349,7 @@ static int ltq_vrx200_pcie_phy_power_off(struct phy *phy) return 0; } -static struct phy_ops ltq_vrx200_pcie_phy_ops = { +static const struct phy_ops ltq_vrx200_pcie_phy_ops = { .init = ltq_vrx200_pcie_phy_init, .exit = ltq_vrx200_pcie_phy_exit, .power_on = ltq_vrx200_pcie_phy_power_on, diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c index ae8370af59c0..31b43d2ee39a 100644 --- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c +++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/module.h> @@ -44,15 +45,12 @@ struct mv_hsic_phy { struct clk *clk; }; -static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout) +static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms) { - timeout += jiffies; - while (time_is_after_eq_jiffies(timeout)) { - if ((readl(reg) & mask) == mask) - return true; - msleep(1); - } - return false; + u32 val; + + return readl_poll_timeout(reg, val, ((val & mask) == mask), + 1000, 1000 * ms); } static int mv_hsic_phy_init(struct phy *phy) @@ -60,6 +58,7 @@ static int mv_hsic_phy_init(struct phy *phy) struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy); struct platform_device *pdev = mv_phy->pdev; void __iomem *base = mv_phy->base; + int ret; clk_prepare_enable(mv_phy->clk); @@ -75,14 +74,14 @@ static int mv_hsic_phy_init(struct phy *phy) base + PHY_28NM_HSIC_PLL_CTRL2); /* Make sure PHY PLL is locked */ - if (!wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2, - PHY_28NM_HSIC_H2S_PLL_LOCK, HZ / 10)) { + ret = wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2, + PHY_28NM_HSIC_H2S_PLL_LOCK, 100); + if (ret) { dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS."); clk_disable_unprepare(mv_phy->clk); - return -ETIMEDOUT; } - return 0; + return ret; } static int mv_hsic_phy_power_on(struct phy *phy) @@ -91,6 +90,7 @@ static int mv_hsic_phy_power_on(struct phy *phy) struct platform_device *pdev = mv_phy->pdev; void __iomem *base = mv_phy->base; u32 reg; + int ret; reg = readl(base + PHY_28NM_HSIC_CTRL); /* Avoid SE0 state when resume for some device will take it as reset */ @@ -108,20 +108,20 @@ static int mv_hsic_phy_power_on(struct phy *phy) */ /* Make sure PHY Calibration is ready */ - if (!wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL, - PHY_28NM_HSIC_H2S_IMPCAL_DONE, HZ / 10)) { + ret = wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL, + PHY_28NM_HSIC_H2S_IMPCAL_DONE, 100); + if (ret) { dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS."); - return -ETIMEDOUT; + return ret; } /* Waiting for HSIC connect int*/ - if (!wait_for_reg(base + PHY_28NM_HSIC_INT, - PHY_28NM_HSIC_CONNECT_INT, HZ / 5)) { + ret = wait_for_reg(base + PHY_28NM_HSIC_INT, + PHY_28NM_HSIC_CONNECT_INT, 200); + if (ret) dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout."); - return -ETIMEDOUT; - } - return 0; + return ret; } static int mv_hsic_phy_power_off(struct phy *phy) diff --git a/drivers/phy/marvell/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c index 9fd881787fa6..a175ae915f02 100644 --- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c +++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c @@ -13,6 +13,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/module.h> @@ -138,15 +139,12 @@ struct mv_usb2_phy { struct clk *clk; }; -static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout) +static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms) { - timeout += jiffies; - while (time_is_after_eq_jiffies(timeout)) { - if ((readl(reg) & mask) == mask) - return true; - msleep(1); - } - return false; + u32 val; + + return readl_poll_timeout(reg, val, ((val & mask) == mask), + 1000, 1000 * ms); } static int mv_usb2_phy_28nm_init(struct phy *phy) @@ -208,24 +206,23 @@ static int mv_usb2_phy_28nm_init(struct phy *phy) */ /* Make sure PHY Calibration is ready */ - if (!wait_for_reg(base + PHY_28NM_CAL_REG, - PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE, - HZ / 10)) { + ret = wait_for_reg(base + PHY_28NM_CAL_REG, + PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE, + 100); + if (ret) { dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS."); - ret = -ETIMEDOUT; goto err_clk; } - if (!wait_for_reg(base + PHY_28NM_RX_REG1, - PHY_28NM_RX_SQCAL_DONE, HZ / 10)) { + ret = wait_for_reg(base + PHY_28NM_RX_REG1, + PHY_28NM_RX_SQCAL_DONE, 100); + if (ret) { dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS."); - ret = -ETIMEDOUT; goto err_clk; } /* Make sure PHY PLL is ready */ - if (!wait_for_reg(base + PHY_28NM_PLL_REG0, - PHY_28NM_PLL_READY, HZ / 10)) { + ret = wait_for_reg(base + PHY_28NM_PLL_REG0, PHY_28NM_PLL_READY, 100); + if (ret) { dev_warn(&pdev->dev, "PLL_READY not set after 100mS."); - ret = -ETIMEDOUT; goto err_clk; } diff --git a/drivers/phy/phy-lgm-usb.c b/drivers/phy/phy-lgm-usb.c new file mode 100644 index 000000000000..309c8f0e0724 --- /dev/null +++ b/drivers/phy/phy-lgm-usb.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel LGM USB PHY driver + * + * Copyright (C) 2020 Intel Corporation. + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/usb/phy.h> +#include <linux/workqueue.h> + +#define CTRL1_OFFSET 0x14 +#define SRAM_EXT_LD_DONE BIT(25) +#define SRAM_INIT_DONE BIT(26) + +#define TCPC_OFFSET 0x1014 +#define TCPC_MUX_CTL GENMASK(1, 0) +#define MUX_NC 0 +#define MUX_USB 1 +#define MUX_DP 2 +#define MUX_USBDP 3 +#define TCPC_FLIPPED BIT(2) +#define TCPC_LOW_POWER_EN BIT(3) +#define TCPC_VALID BIT(4) +#define TCPC_CONN \ + (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB)) +#define TCPC_DISCONN \ + (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN) + +static const char *const PHY_RESETS[] = { "phy31", "phy", }; +static const char *const CTL_RESETS[] = { "apb", "ctrl", }; + +struct tca_apb { + struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)]; + struct regulator *vbus; + struct work_struct wk; + struct usb_phy phy; + + bool regulator_enabled; + bool phy_initialized; + bool connected; +}; + +static int get_flipped(struct tca_apb *ta, bool *flipped) +{ + union extcon_property_value property; + int ret; + + ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY, &property); + if (ret) { + dev_err(ta->phy.dev, "no polarity property from extcon\n"); + return ret; + } + + *flipped = property.intval; + + return 0; +} + +static int phy_init(struct usb_phy *phy) +{ + struct tca_apb *ta = container_of(phy, struct tca_apb, phy); + void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET; + int val, ret, i; + + if (ta->phy_initialized) + return 0; + + for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) + reset_control_deassert(ta->resets[i]); + + ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000); + if (ret) { + dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val); + return ret; + } + + writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1); + + ta->phy_initialized = true; + if (!ta->phy.edev) { + writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET); + return phy->set_vbus(phy, true); + } + + schedule_work(&ta->wk); + + return ret; +} + +static void phy_shutdown(struct usb_phy *phy) +{ + struct tca_apb *ta = container_of(phy, struct tca_apb, phy); + int i; + + if (!ta->phy_initialized) + return; + + ta->phy_initialized = false; + flush_work(&ta->wk); + ta->phy.set_vbus(&ta->phy, false); + + ta->connected = false; + writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET); + + for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) + reset_control_assert(ta->resets[i]); +} + +static int phy_set_vbus(struct usb_phy *phy, int on) +{ + struct tca_apb *ta = container_of(phy, struct tca_apb, phy); + int ret; + + if (!!on == ta->regulator_enabled) + return 0; + + if (on) + ret = regulator_enable(ta->vbus); + else + ret = regulator_disable(ta->vbus); + + if (!ret) + ta->regulator_enabled = on; + + dev_dbg(ta->phy.dev, "set vbus: %d\n", on); + return ret; +} + +static void tca_work(struct work_struct *work) +{ + struct tca_apb *ta = container_of(work, struct tca_apb, wk); + bool connected; + bool flipped = false; + u32 val; + int ret; + + ret = get_flipped(ta, &flipped); + if (ret) + return; + + connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST); + if (connected == ta->connected) + return; + + ta->connected = connected; + if (connected) { + val = TCPC_CONN; + if (flipped) + val |= TCPC_FLIPPED; + dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : ""); + } else { + val = TCPC_DISCONN; + dev_dbg(ta->phy.dev, "disconnected\n"); + } + + writel(val, ta->phy.io_priv + TCPC_OFFSET); + + ret = ta->phy.set_vbus(&ta->phy, connected); + if (ret) + dev_err(ta->phy.dev, "failed to set VBUS\n"); +} + +static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr) +{ + struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb); + + if (ta->phy_initialized) + schedule_work(&ta->wk); + + return NOTIFY_DONE; +} + +static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr) +{ + return NOTIFY_DONE; +} + +static int phy_probe(struct platform_device *pdev) +{ + struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)]; + struct device *dev = &pdev->dev; + struct usb_phy *phy; + struct tca_apb *ta; + int i; + + ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL); + if (!ta) + return -ENOMEM; + + platform_set_drvdata(pdev, ta); + INIT_WORK(&ta->wk, tca_work); + + phy = &ta->phy; + phy->dev = dev; + phy->label = dev_name(dev); + phy->type = USB_PHY_TYPE_USB3; + phy->init = phy_init; + phy->shutdown = phy_shutdown; + phy->set_vbus = phy_set_vbus; + phy->id_nb.notifier_call = id_notifier; + phy->vbus_nb.notifier_call = vbus_notifier; + + phy->io_priv = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->io_priv)) + return PTR_ERR(phy->io_priv); + + ta->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(ta->vbus)) + return PTR_ERR(ta->vbus); + + for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) { + resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]); + if (IS_ERR(resets[i])) { + dev_err(dev, "%s reset not found\n", CTL_RESETS[i]); + return PTR_ERR(resets[i]); + } + } + + for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) { + ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]); + if (IS_ERR(ta->resets[i])) { + dev_err(dev, "%s reset not found\n", PHY_RESETS[i]); + return PTR_ERR(ta->resets[i]); + } + } + + for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) + reset_control_assert(resets[i]); + + for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) + reset_control_assert(ta->resets[i]); + /* + * Out-of-band reset of the controller after PHY reset will cause + * controller malfunctioning, so we should use in-band controller + * reset only and leave the controller de-asserted here. + */ + for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) + reset_control_deassert(resets[i]); + + /* Need to wait at least 20us after de-assert the controller */ + usleep_range(20, 100); + + return usb_add_phy_dev(phy); +} + +static int phy_remove(struct platform_device *pdev) +{ + struct tca_apb *ta = platform_get_drvdata(pdev); + + usb_remove_phy(&ta->phy); + + return 0; +} + +static const struct of_device_id intel_usb_phy_dt_ids[] = { + { .compatible = "intel,lgm-usb-phy" }, + { } +}; +MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids); + +static struct platform_driver lgm_phy_driver = { + .driver = { + .name = "lgm-usb-phy", + .of_match_table = intel_usb_phy_dt_ids, + }, + .probe = phy_probe, + .remove = phy_remove, +}; + +module_platform_driver(lgm_phy_driver); + +MODULE_DESCRIPTION("Intel LGM USB PHY driver"); +MODULE_AUTHOR("Li Yin <yin1.li@intel.com>"); +MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c index febe0aef68d4..ce91ae7f8dbd 100644 --- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c +++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c @@ -4,6 +4,7 @@ */ #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> @@ -72,18 +73,12 @@ struct qcom_apq8064_sata_phy { }; /* Helper function to do poll and timeout */ -static int read_poll_timeout(void __iomem *addr, u32 mask) +static int poll_timeout(void __iomem *addr, u32 mask) { - unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); + u32 val; - do { - if (readl_relaxed(addr) & mask) - return 0; - - usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); - } while (!time_after(jiffies, timeout)); - - return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT; + return readl_relaxed_poll_timeout(addr, val, (val & mask), + DELAY_INTERVAL_US, TIMEOUT_MS * 1000); } static int qcom_apq8064_sata_phy_init(struct phy *generic_phy) @@ -137,21 +132,21 @@ static int qcom_apq8064_sata_phy_init(struct phy *generic_phy) writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2); /* PLL Lock wait */ - ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK); + ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK); if (ret) { dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n"); return ret; } /* TX Calibration */ - ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL); + ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL); if (ret) { dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n"); return ret; } /* RX Calibration */ - ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL); + ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL); if (ret) { dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n"); return ret; diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c index b8ef331e1545..fc7f9df80a7b 100644 --- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c @@ -48,7 +48,7 @@ static int ipq4019_ss_phy_power_on(struct phy *_phy) return 0; } -static struct phy_ops ipq4019_usb_ss_phy_ops = { +static const struct phy_ops ipq4019_usb_ss_phy_ops = { .power_on = ipq4019_ss_phy_power_on, .power_off = ipq4019_ss_phy_power_off, }; @@ -80,7 +80,7 @@ static int ipq4019_hs_phy_power_on(struct phy *_phy) return 0; } -static struct phy_ops ipq4019_usb_hs_phy_ops = { +static const struct phy_ops ipq4019_usb_hs_phy_ops = { .power_on = ipq4019_hs_phy_power_on, .power_off = ipq4019_hs_phy_power_off, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 6e6f992a9524..5d33ad4d06f2 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -946,6 +946,88 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), }; +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00), +}; + +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00), +}; + +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00), +}; + +static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08), +}; + +static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), +}; + static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), @@ -1761,6 +1843,16 @@ struct qmp_phy_cfg { const struct qmp_phy_init_tbl *pcs_misc_tbl; int pcs_misc_tbl_num; + /* Init sequence for DP PHY block link rates */ + const struct qmp_phy_init_tbl *serdes_tbl_rbr; + int serdes_tbl_rbr_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr; + int serdes_tbl_hbr_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr2; + int serdes_tbl_hbr2_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr3; + int serdes_tbl_hbr3_num; + /* clock ids to be requested */ const char * const *clk_list; int num_clks; @@ -1797,10 +1889,17 @@ struct qmp_phy_cfg { bool no_pcs_sw_reset; }; +struct qmp_phy_combo_cfg { + const struct qmp_phy_cfg *usb_cfg; + const struct qmp_phy_cfg *dp_cfg; +}; + /** * struct qmp_phy - per-lane phy descriptor * * @phy: generic phy + * @cfg: phy specific configuration + * @serdes: iomapped memory space for phy's serdes (i.e. PLL) * @tx: iomapped memory space for lane's tx * @rx: iomapped memory space for lane's rx * @pcs: iomapped memory space for lane's pcs @@ -1811,9 +1910,12 @@ struct qmp_phy_cfg { * @index: lane index * @qmp: QMP phy to which this lane belongs * @lane_rst: lane's reset controller + * @mode: current PHY mode */ struct qmp_phy { struct phy *phy; + const struct qmp_phy_cfg *cfg; + void __iomem *serdes; void __iomem *tx; void __iomem *rx; void __iomem *pcs; @@ -1824,43 +1926,45 @@ struct qmp_phy { unsigned int index; struct qcom_qmp *qmp; struct reset_control *lane_rst; + enum phy_mode mode; + unsigned int dp_aux_cfg; + struct phy_configure_opts_dp dp_opts; + struct qmp_phy_dp_clks *dp_clks; +}; + +struct qmp_phy_dp_clks { + struct qmp_phy *qphy; + struct clk_hw dp_link_hw; + struct clk_hw dp_pixel_hw; }; /** * struct qcom_qmp - structure holding QMP phy block attributes * * @dev: device - * @serdes: iomapped memory space for phy's serdes * @dp_com: iomapped memory space for phy's dp_com control block * * @clks: array of clocks required by phy * @resets: array of resets required by phy * @vregs: regulator supplies bulk data * - * @cfg: phy specific configuration * @phys: array of per-lane phy descriptors * @phy_mutex: mutex lock for PHY common block initialization * @init_count: phy common block initialization count - * @phy_initialized: indicate if PHY has been initialized - * @mode: current PHY mode * @ufs_reset: optional UFS PHY reset handle */ struct qcom_qmp { struct device *dev; - void __iomem *serdes; void __iomem *dp_com; struct clk_bulk_data *clks; struct reset_control **resets; struct regulator_bulk_data *vregs; - const struct qmp_phy_cfg *cfg; struct qmp_phy **phys; struct mutex phy_mutex; int init_count; - bool phy_initialized; - enum phy_mode mode; struct reset_control *ufs_reset; }; @@ -2203,6 +2307,41 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { .is_dual_lane_phy = true, }; +static const struct qmp_phy_cfg sc7180_dpphy_cfg = { + .type = PHY_TYPE_DP, + .nlanes = 1, + + .serdes_tbl = qmp_v3_dp_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl), + .tx_tbl = qmp_v3_dp_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3), + + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = sc7180_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .has_phy_dp_com_ctrl = true, + .is_dual_lane_phy = true, +}; + +static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = { + .usb_cfg = &sc7180_usb3phy_cfg, + .dp_cfg = &sc7180_dpphy_cfg, +}; + static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -2479,11 +2618,300 @@ static void qcom_qmp_phy_configure(void __iomem *base, qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff); } +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *serdes = qphy->serdes; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; + int serdes_tbl_num = cfg->serdes_tbl_num; + int ret; + + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num); + + if (cfg->type == PHY_TYPE_DP) { + switch (dp_opts->link_rate) { + case 1620: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_rbr, + cfg->serdes_tbl_rbr_num); + break; + case 2700: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr, + cfg->serdes_tbl_hbr_num); + break; + case 5400: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr2, + cfg->serdes_tbl_hbr2_num); + break; + case 8100: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr3, + cfg->serdes_tbl_hbr3_num); + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + } + + + if (cfg->has_phy_com_ctrl) { + void __iomem *status; + unsigned int mask, val; + + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], + SERDES_START | PCS_START); + + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; + mask = cfg->mask_com_pcs_ready; + + ret = readl_poll_timeout(status, val, (val & mask), 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, + "phy common block init timed-out\n"); + return ret; + } + } + + return 0; +} + +static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy) +{ + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + /* Turn on BIAS current for PHY/PLL */ + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_LANE_0_1_PWRDN | + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN | + DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(QSERDES_V3_COM_BIAS_EN | + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL | + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0); + writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4); + writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7); + writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9); + qphy->dp_aux_cfg = 0; + + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | + PHY_AUX_REQ_ERR_MASK, + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); +} + +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { + { 0x00, 0x0c, 0x14, 0x19 }, + { 0x00, 0x0b, 0x12, 0xff }, + { 0x00, 0x0b, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x19, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + unsigned int v_level = 0, p_level = 0; + u32 bias_en, drvr_en; + u8 voltage_swing_cfg, pre_emphasis_cfg; + int i; + + for (i = 0; i < dp_opts->lanes; i++) { + v_level = max(v_level, dp_opts->voltage[i]); + p_level = max(p_level, dp_opts->pre[i]); + } + + if (dp_opts->lanes == 1) { + bias_en = 0x3e; + drvr_en = 0x13; + } else { + bias_en = 0x3f; + drvr_en = 0x10; + } + + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; + + /* TODO: Move check to config check */ + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + return; + + /* Enable MUX to use Cursor values from these registers */ + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + + writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); + writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); + + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); +} + +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) +{ + const struct phy_configure_opts_dp *dp_opts = &opts->dp; + struct qmp_phy *qphy = phy_get_drvdata(phy); + + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts)); + if (qphy->dp_opts.set_voltages) { + qcom_qmp_phy_configure_dp_tx(qphy); + qphy->dp_opts.set_voltages = 0; + } + + return 0; +} + +static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy) +{ + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 val, phy_vco_div, status; + unsigned long pixel_freq; + + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN; + + /* + * TODO: Assume orientation is CC1 for now and two lanes, need to + * use type-c connector to understand orientation and lanes. + * + * Otherwise val changes to be like below if this code understood + * the orientation of the type-c cable. + * + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2) + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN; + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1) + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + * if (orientation == ORIENTATION_CC2) + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + */ + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL); + + switch (dp_opts->link_rate) { + case 1620: + phy_vco_div = 0x1; + pixel_freq = 1620000000UL / 2; + break; + case 2700: + phy_vco_div = 0x1; + pixel_freq = 2700000000UL / 2; + break; + case 5400: + phy_vco_div = 0x2; + pixel_freq = 5400000000UL / 4; + break; + case 8100: + phy_vco_div = 0x0; + pixel_freq = 8100000000UL / 6; + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV); + + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000); + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq); + + writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL); + + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + udelay(2000); + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000); +} + +/* + * We need to calibrate the aux setting here as many times + * as the caller tries + */ +static int qcom_qmp_dp_phy_calibrate(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d }; + u8 val; + + qphy->dp_aux_cfg++; + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings); + val = cfg1_settings[qphy->dp_aux_cfg]; + + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + + return 0; +} + static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) { struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *serdes = qmp->serdes; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *serdes = qphy->serdes; void __iomem *pcs = qphy->pcs; void __iomem *dp_com = qmp->dp_com; int ret, i; @@ -2514,7 +2942,7 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) ret = reset_control_deassert(qmp->resets[i]); if (ret) { dev_err(qmp->dev, "%s reset deassert failed\n", - qmp->cfg->reset_list[i]); + qphy->cfg->reset_list[i]); goto err_rst; } } @@ -2533,6 +2961,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + /* Default type-c orientation, i.e CC1 */ + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02); + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, USB3_MODE | DP_MODE); @@ -2540,6 +2971,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03); + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); } if (cfg->has_phy_com_ctrl) { @@ -2555,36 +2989,10 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) cfg->pwrdn_ctrl); } - /* Serdes configuration */ - qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, - cfg->serdes_tbl_num); - - if (cfg->has_phy_com_ctrl) { - void __iomem *status; - unsigned int mask, val; - - qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); - qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], - SERDES_START | PCS_START); - - status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; - mask = cfg->mask_com_pcs_ready; - - ret = readl_poll_timeout(status, val, (val & mask), 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, - "phy common block init timed-out\n"); - goto err_com_init; - } - } - mutex_unlock(&qmp->phy_mutex); return 0; -err_com_init: - clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); err_rst: while (++i < cfg->num_resets) reset_control_assert(qmp->resets[i]); @@ -2596,10 +3004,11 @@ err_reg_enable: return ret; } -static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) +static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy) { - const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *serdes = qmp->serdes; + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *serdes = qphy->serdes; int i = cfg->num_resets; mutex_lock(&qmp->phy_mutex); @@ -2630,20 +3039,12 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) return 0; } -static int qcom_qmp_phy_enable(struct phy *phy) +static int qcom_qmp_phy_init(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *tx = qphy->tx; - void __iomem *rx = qphy->rx; - void __iomem *pcs = qphy->pcs; - void __iomem *pcs_misc = qphy->pcs_misc; - void __iomem *dp_com = qmp->dp_com; - void __iomem *status; - unsigned int mask, val, ready; + const struct qmp_phy_cfg *cfg = qphy->cfg; int ret; - dev_vdbg(qmp->dev, "Initializing QMP phy\n"); if (cfg->no_pcs_sw_reset) { @@ -2670,13 +3071,34 @@ static int qcom_qmp_phy_enable(struct phy *phy) ret = reset_control_assert(qmp->ufs_reset); if (ret) - goto err_lane_rst; + return ret; } ret = qcom_qmp_phy_com_init(qphy); if (ret) return ret; + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_dp_aux_init(qphy); + + return 0; +} + +static int qcom_qmp_phy_power_on(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *tx = qphy->tx; + void __iomem *rx = qphy->rx; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + void __iomem *status; + unsigned int mask, val, ready; + int ret; + + qcom_qmp_phy_serdes_init(qphy); + if (cfg->has_lane_rst) { ret = reset_control_deassert(qphy->lane_rst); if (ret) { @@ -2700,13 +3122,23 @@ static int qcom_qmp_phy_enable(struct phy *phy) qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 2); + /* Configure special DP tx tunings */ + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_configure_dp_tx(qphy); + qcom_qmp_phy_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); + if (cfg->is_dual_lane_phy) qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 2); - qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + /* Configure link rate, swing, etc. */ + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_configure_dp_phy(qphy); + else + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + ret = reset_control_deassert(qmp->ufs_reset); if (ret) goto err_lane_rst; @@ -2724,102 +3156,129 @@ static int qcom_qmp_phy_enable(struct phy *phy) if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - /* Pull PHY out of reset state */ - if (!cfg->no_pcs_sw_reset) - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - - if (cfg->has_phy_dp_com_ctrl) - qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); - - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - - if (cfg->type == PHY_TYPE_UFS) { - status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = PCS_READY; - ready = PCS_READY; - } else { - status = pcs + cfg->regs[QPHY_PCS_STATUS]; - mask = PHYSTATUS; - ready = 0; - } + if (cfg->type != PHY_TYPE_DP) { + /* Pull PHY out of reset state */ + if (!cfg->no_pcs_sw_reset) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + + if (cfg->type == PHY_TYPE_UFS) { + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = PCS_READY; + ready = PCS_READY; + } else { + status = pcs + cfg->regs[QPHY_PCS_STATUS]; + mask = PHYSTATUS; + ready = 0; + } - ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, "phy initialization timed-out\n"); - goto err_pcs_ready; + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + goto err_pcs_ready; + } } - qmp->phy_initialized = true; return 0; err_pcs_ready: - reset_control_assert(qmp->ufs_reset); clk_disable_unprepare(qphy->pipe_clk); err_clk_enable: if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); err_lane_rst: - qcom_qmp_phy_com_exit(qmp); - return ret; } -static int qcom_qmp_phy_disable(struct phy *phy) +static int qcom_qmp_phy_power_off(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; + const struct qmp_phy_cfg *cfg = qphy->cfg; clk_disable_unprepare(qphy->pipe_clk); - /* PHY reset */ - if (!cfg->no_pcs_sw_reset) - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->type == PHY_TYPE_DP) { + /* Assert DP PHY power down */ + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + } else { + /* PHY reset */ + if (!cfg->no_pcs_sw_reset) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* stop SerDes and Phy-Coding-Sublayer */ - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + /* stop SerDes and Phy-Coding-Sublayer */ + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Put PHY into POWER DOWN state: active low */ - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - } else { - qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); + /* Put PHY into POWER DOWN state: active low */ + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); + } else { + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, + cfg->pwrdn_ctrl); + } } + return 0; +} + +static int qcom_qmp_phy_exit(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qphy->cfg; + if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); - qcom_qmp_phy_com_exit(qmp); - - qmp->phy_initialized = false; + qcom_qmp_phy_com_exit(qphy); return 0; } +static int qcom_qmp_phy_enable(struct phy *phy) +{ + int ret; + + ret = qcom_qmp_phy_init(phy); + if (ret) + return ret; + + ret = qcom_qmp_phy_power_on(phy); + if (ret) + qcom_qmp_phy_exit(phy); + + return ret; +} + +static int qcom_qmp_phy_disable(struct phy *phy) +{ + int ret; + + ret = qcom_qmp_phy_power_off(phy); + if (ret) + return ret; + return qcom_qmp_phy_exit(phy); +} + static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - qmp->mode = mode; + qphy->mode = mode; return 0; } static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy) { - struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; + const struct qmp_phy_cfg *cfg = qphy->cfg; void __iomem *pcs = qphy->pcs; void __iomem *pcs_misc = qphy->pcs_misc; u32 intr_mask; - if (qmp->mode == PHY_MODE_USB_HOST_SS || - qmp->mode == PHY_MODE_USB_DEVICE_SS) + if (qphy->mode == PHY_MODE_USB_HOST_SS || + qphy->mode == PHY_MODE_USB_DEVICE_SS) intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN; else intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL; @@ -2842,8 +3301,7 @@ static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy) static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy) { - struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; + const struct qmp_phy_cfg *cfg = qphy->cfg; void __iomem *pcs = qphy->pcs; void __iomem *pcs_misc = qphy->pcs_misc; @@ -2863,15 +3321,15 @@ static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev) { struct qcom_qmp *qmp = dev_get_drvdata(dev); struct qmp_phy *qphy = qmp->phys[0]; - const struct qmp_phy_cfg *cfg = qmp->cfg; + const struct qmp_phy_cfg *cfg = qphy->cfg; - dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode); + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY */ + /* Supported only for USB3 PHY and luckily USB3 is the first phy */ if (cfg->type != PHY_TYPE_USB3) return 0; - if (!qmp->phy_initialized) { + if (!qmp->init_count) { dev_vdbg(dev, "PHY not initialized, bailing out\n"); return 0; } @@ -2888,16 +3346,16 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev) { struct qcom_qmp *qmp = dev_get_drvdata(dev); struct qmp_phy *qphy = qmp->phys[0]; - const struct qmp_phy_cfg *cfg = qmp->cfg; + const struct qmp_phy_cfg *cfg = qphy->cfg; int ret = 0; - dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode); + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY */ + /* Supported only for USB3 PHY and luckily USB3 is the first phy */ if (cfg->type != PHY_TYPE_USB3) return 0; - if (!qmp->phy_initialized) { + if (!qmp->init_count) { dev_vdbg(dev, "PHY not initialized, bailing out\n"); return 0; } @@ -2920,10 +3378,10 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev) return 0; } -static int qcom_qmp_phy_vreg_init(struct device *dev) +static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg) { struct qcom_qmp *qmp = dev_get_drvdata(dev); - int num = qmp->cfg->num_vregs; + int num = cfg->num_vregs; int i; qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL); @@ -2931,24 +3389,24 @@ static int qcom_qmp_phy_vreg_init(struct device *dev) return -ENOMEM; for (i = 0; i < num; i++) - qmp->vregs[i].supply = qmp->cfg->vreg_list[i]; + qmp->vregs[i].supply = cfg->vreg_list[i]; return devm_regulator_bulk_get(dev, num, qmp->vregs); } -static int qcom_qmp_phy_reset_init(struct device *dev) +static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg) { struct qcom_qmp *qmp = dev_get_drvdata(dev); int i; - qmp->resets = devm_kcalloc(dev, qmp->cfg->num_resets, + qmp->resets = devm_kcalloc(dev, cfg->num_resets, sizeof(*qmp->resets), GFP_KERNEL); if (!qmp->resets) return -ENOMEM; - for (i = 0; i < qmp->cfg->num_resets; i++) { + for (i = 0; i < cfg->num_resets; i++) { struct reset_control *rst; - const char *name = qmp->cfg->reset_list[i]; + const char *name = cfg->reset_list[i]; rst = devm_reset_control_get(dev, name); if (IS_ERR(rst)) { @@ -2961,10 +3419,10 @@ static int qcom_qmp_phy_reset_init(struct device *dev) return 0; } -static int qcom_qmp_phy_clk_init(struct device *dev) +static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg) { struct qcom_qmp *qmp = dev_get_drvdata(dev); - int num = qmp->cfg->num_clks; + int num = cfg->num_clks; int i; qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL); @@ -2972,12 +3430,12 @@ static int qcom_qmp_phy_clk_init(struct device *dev) return -ENOMEM; for (i = 0; i < num; i++) - qmp->clks[i].id = qmp->cfg->clk_list[i]; + qmp->clks[i].id = cfg->clk_list[i]; return devm_clk_bulk_get(dev, num, qmp->clks); } -static void phy_pipe_clk_release_provider(void *res) +static void phy_clk_release_provider(void *res) { of_clk_del_provider(res); } @@ -3006,12 +3464,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) struct clk_init_data init = { }; int ret; - if ((qmp->cfg->type != PHY_TYPE_USB3) && - (qmp->cfg->type != PHY_TYPE_PCIE)) { - /* not all phys register pipe clocks, so return success */ - return 0; - } - ret = of_property_read_string(np, "clock-output-names", &init.name); if (ret) { dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np); @@ -3040,9 +3492,202 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) * Roll a devm action because the clock provider is the child node, but * the child node is not actually a device. */ - ret = devm_add_action(qmp->dev, phy_pipe_clk_release_provider, np); + ret = devm_add_action(qmp->dev, phy_clk_release_provider, np); + if (ret) + phy_clk_release_provider(np); + + return ret; +} + +/* + * Display Port PLL driver block diagram for branch clocks + * + * +------------------------------+ + * | DP_VCO_CLK | + * | | + * | +-------------------+ | + * | | (DP PLL/VCO) | | + * | +---------+---------+ | + * | v | + * | +----------+-----------+ | + * | | hsclk_divsel_clk_src | | + * | +----------+-----------+ | + * +------------------------------+ + * | + * +---------<---------v------------>----------+ + * | | + * +--------v----------------+ | + * | dp_phy_pll_link_clk | | + * | link_clk | | + * +--------+----------------+ | + * | | + * | | + * v v + * Input to DISPCC block | + * for link clk, crypto clk | + * and interface clock | + * | + * | + * +--------<------------+-----------------+---<---+ + * | | | + * +----v---------+ +--------v-----+ +--------v------+ + * | vco_divided | | vco_divided | | vco_divided | + * | _clk_src | | _clk_src | | _clk_src | + * | | | | | | + * |divsel_six | | divsel_two | | divsel_four | + * +-------+------+ +-----+--------+ +--------+------+ + * | | | + * v---->----------v-------------<------v + * | + * +----------+-----------------+ + * | dp_phy_pll_vco_div_clk | + * +---------+------------------+ + * | + * v + * Input to DISPCC block + * for DP pixel clock + * + */ +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + switch (req->rate) { + case 1620000000UL / 2: + case 2700000000UL / 2: + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */ + return 0; + default: + return -EINVAL; + } +} + +static unsigned long +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + const struct qmp_phy_dp_clks *dp_clks; + const struct qmp_phy *qphy; + const struct phy_configure_opts_dp *dp_opts; + + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw); + qphy = dp_clks->qphy; + dp_opts = &qphy->dp_opts; + + switch (dp_opts->link_rate) { + case 1620: + return 1620000000UL / 2; + case 2700: + return 2700000000UL / 2; + case 5400: + return 5400000000UL / 4; + case 8100: + return 8100000000UL / 6; + default: + return 0; + } +} + +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = { + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate, + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate, +}; + +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + switch (req->rate) { + case 162000000: + case 270000000: + case 540000000: + case 810000000: + return 0; + default: + return -EINVAL; + } +} + +static unsigned long +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + const struct qmp_phy_dp_clks *dp_clks; + const struct qmp_phy *qphy; + const struct phy_configure_opts_dp *dp_opts; + + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw); + qphy = dp_clks->qphy; + dp_opts = &qphy->dp_opts; + + switch (dp_opts->link_rate) { + case 1620: + case 2700: + case 5400: + case 8100: + return dp_opts->link_rate * 100000; + default: + return 0; + } +} + +static const struct clk_ops qcom_qmp_dp_link_clk_ops = { + .determine_rate = qcom_qmp_dp_link_clk_determine_rate, + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate, +}; + +static struct clk_hw * +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data) +{ + struct qmp_phy_dp_clks *dp_clks = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= 2) { + pr_err("%s: invalid index %u\n", __func__, idx); + return ERR_PTR(-EINVAL); + } + + if (idx == 0) + return &dp_clks->dp_link_hw; + + return &dp_clks->dp_pixel_hw; +} + +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy, + struct device_node *np) +{ + struct clk_init_data init = { }; + struct qmp_phy_dp_clks *dp_clks; + int ret; + + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL); + if (!dp_clks) + return -ENOMEM; + + dp_clks->qphy = qphy; + qphy->dp_clks = dp_clks; + + init.ops = &qcom_qmp_dp_link_clk_ops; + init.name = "qmp_dp_phy_pll_link_clk"; + dp_clks->dp_link_hw.init = &init; + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw); + if (ret) + return ret; + + init.ops = &qcom_qmp_dp_pixel_clk_ops; + init.name = "qmp_dp_phy_pll_vco_div_clk"; + dp_clks->dp_pixel_hw.init = &init; + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks); + if (ret) + return ret; + + /* + * Roll a devm action because the clock provider is the child node, but + * the child node is not actually a device. + */ + ret = devm_add_action(qmp->dev, phy_clk_release_provider, np); if (ret) - phy_pipe_clk_release_provider(np); + phy_clk_release_provider(np); return ret; } @@ -3054,6 +3699,17 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = { .owner = THIS_MODULE, }; +static const struct phy_ops qcom_qmp_phy_dp_ops = { + .init = qcom_qmp_phy_init, + .configure = qcom_qmp_dp_phy_configure, + .power_on = qcom_qmp_phy_power_on, + .calibrate = qcom_qmp_dp_phy_calibrate, + .power_off = qcom_qmp_phy_power_off, + .exit = qcom_qmp_phy_exit, + .set_mode = qcom_qmp_phy_set_mode, + .owner = THIS_MODULE, +}; + static const struct phy_ops qcom_qmp_pcie_ufs_ops = { .power_on = qcom_qmp_phy_enable, .power_off = qcom_qmp_phy_disable, @@ -3062,12 +3718,13 @@ static const struct phy_ops qcom_qmp_pcie_ufs_ops = { }; static -int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) +int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id, + void __iomem *serdes, const struct qmp_phy_cfg *cfg) { struct qcom_qmp *qmp = dev_get_drvdata(dev); struct phy *generic_phy; struct qmp_phy *qphy; - const struct phy_ops *ops = &qcom_qmp_phy_gen_ops; + const struct phy_ops *ops; char prop_name[MAX_PROP_NAME]; int ret; @@ -3075,6 +3732,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) if (!qphy) return -ENOMEM; + qphy->cfg = cfg; + qphy->serdes = serdes; /* * Get memory resources for each phy lane: * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. @@ -3099,7 +3758,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) * back to old legacy behavior of assuming they can be reached at an * offset from the first lane. */ - if (qmp->cfg->is_dual_lane_phy) { + if (cfg->is_dual_lane_phy) { qphy->tx2 = of_iomap(np, 3); qphy->rx2 = of_iomap(np, 4); if (!qphy->tx2 || !qphy->rx2) { @@ -3132,8 +3791,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) snprintf(prop_name, sizeof(prop_name), "pipe%d", id); qphy->pipe_clk = of_clk_get_by_name(np, prop_name); if (IS_ERR(qphy->pipe_clk)) { - if (qmp->cfg->type == PHY_TYPE_PCIE || - qmp->cfg->type == PHY_TYPE_USB3) { + if (cfg->type == PHY_TYPE_PCIE || + cfg->type == PHY_TYPE_USB3) { ret = PTR_ERR(qphy->pipe_clk); if (ret != -EPROBE_DEFER) dev_err(dev, @@ -3145,7 +3804,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) } /* Get lane reset, if any */ - if (qmp->cfg->has_lane_rst) { + if (cfg->has_lane_rst) { snprintf(prop_name, sizeof(prop_name), "lane%d", id); qphy->lane_rst = of_reset_control_get(np, prop_name); if (IS_ERR(qphy->lane_rst)) { @@ -3154,8 +3813,12 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) } } - if (qmp->cfg->type == PHY_TYPE_UFS || qmp->cfg->type == PHY_TYPE_PCIE) + if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE) ops = &qcom_qmp_pcie_ufs_ops; + else if (cfg->type == PHY_TYPE_DP) + ops = &qcom_qmp_phy_dp_ops; + else + ops = &qcom_qmp_phy_gen_ops; generic_phy = devm_phy_create(dev, np, ops); if (IS_ERR(generic_phy)) { @@ -3199,6 +3862,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { .compatible = "qcom,sc7180-qmp-usb3-phy", .data = &sc7180_usb3phy_cfg, }, { + .compatible = "qcom,sc7180-qmp-usb3-dp-phy", + /* It's a combo phy */ + }, { .compatible = "qcom,sdm845-qhp-pcie-phy", .data = &sdm845_qhp_pciephy_cfg, }, { @@ -3239,6 +3905,14 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = { + { + .compatible = "qcom,sc7180-qmp-usb3-dp-phy", + .data = &sc7180_usb3dpphy_cfg, + }, + { } +}; + static const struct dev_pm_ops qcom_qmp_phy_pm_ops = { SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend, qcom_qmp_phy_runtime_resume, NULL) @@ -3248,11 +3922,16 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) { struct qcom_qmp *qmp; struct device *dev = &pdev->dev; - struct resource *res; struct device_node *child; struct phy_provider *phy_provider; - void __iomem *base; - int num, id; + void __iomem *serdes; + void __iomem *usb_serdes; + void __iomem *dp_serdes; + const struct qmp_phy_combo_cfg *combo_cfg = NULL; + const struct qmp_phy_cfg *cfg = NULL; + const struct qmp_phy_cfg *usb_cfg = NULL; + const struct qmp_phy_cfg *dp_cfg = NULL; + int num, id, expected_phys; int ret; qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL); @@ -3263,40 +3942,57 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) dev_set_drvdata(dev, qmp); /* Get the specific init parameters of QMP phy */ - qmp->cfg = of_device_get_match_data(dev); - if (!qmp->cfg) - return -EINVAL; + cfg = of_device_get_match_data(dev); + if (!cfg) { + const struct of_device_id *match; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev); + if (!match) + return -EINVAL; + + combo_cfg = match->data; + if (!combo_cfg) + return -EINVAL; + + usb_cfg = combo_cfg->usb_cfg; + cfg = usb_cfg; /* Setup clks and regulators */ + } /* per PHY serdes; usually located at base address */ - qmp->serdes = base; + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(serdes)) + return PTR_ERR(serdes); /* per PHY dp_com; if PHY has dp_com control block */ - if (qmp->cfg->has_phy_dp_com_ctrl) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "dp_com"); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - qmp->dp_com = base; + if (combo_cfg || cfg->has_phy_dp_com_ctrl) { + qmp->dp_com = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(qmp->dp_com)) + return PTR_ERR(qmp->dp_com); + } + + if (combo_cfg) { + /* Only two serdes for combo PHY */ + dp_serdes = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(dp_serdes)) + return PTR_ERR(dp_serdes); + + dp_cfg = combo_cfg->dp_cfg; + expected_phys = 2; + } else { + expected_phys = cfg->nlanes; } mutex_init(&qmp->phy_mutex); - ret = qcom_qmp_phy_clk_init(dev); + ret = qcom_qmp_phy_clk_init(dev, cfg); if (ret) return ret; - ret = qcom_qmp_phy_reset_init(dev); + ret = qcom_qmp_phy_reset_init(dev, cfg); if (ret) return ret; - ret = qcom_qmp_phy_vreg_init(dev); + ret = qcom_qmp_phy_vreg_init(dev, cfg); if (ret) { if (ret != -EPROBE_DEFER) dev_err(dev, "failed to get regulator supplies: %d\n", @@ -3306,14 +4002,13 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) num = of_get_available_child_count(dev->of_node); /* do we have a rogue child node ? */ - if (num > qmp->cfg->nlanes) + if (num > expected_phys) return -EINVAL; qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL); if (!qmp->phys) return -ENOMEM; - id = 0; pm_runtime_set_active(dev); pm_runtime_enable(dev); /* @@ -3322,9 +4017,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) */ pm_runtime_forbid(dev); + id = 0; for_each_available_child_of_node(dev->of_node, child) { + if (of_node_name_eq(child, "dp-phy")) { + cfg = dp_cfg; + serdes = dp_serdes; + } else if (of_node_name_eq(child, "usb3-phy")) { + cfg = usb_cfg; + serdes = usb_serdes; + } + /* Create per-lane phy */ - ret = qcom_qmp_phy_create(dev, child, id); + ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg); if (ret) { dev_err(dev, "failed to create lane%d phy, %d\n", id, ret); @@ -3335,11 +4039,20 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) * Register the pipe clock provided by phy. * See function description to see details of this pipe clock. */ - ret = phy_pipe_clk_register(qmp, child); - if (ret) { - dev_err(qmp->dev, - "failed to register pipe clock source\n"); - goto err_node_put; + if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) { + ret = phy_pipe_clk_register(qmp, child); + if (ret) { + dev_err(qmp->dev, + "failed to register pipe clock source\n"); + goto err_node_put; + } + } else if (cfg->type == PHY_TYPE_DP) { + ret = phy_dp_clks_register(qmp, qmp->phys[id], child); + if (ret) { + dev_err(qmp->dev, + "failed to register DP clock source\n"); + goto err_node_put; + } } id++; } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 904b80ab9009..b7c530088a6c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -137,6 +137,9 @@ #define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c /* Only for QMP V3 PHY - QSERDES COM registers */ +#define QSERDES_V3_COM_ATB_SEL1 0x000 +#define QSERDES_V3_COM_ATB_SEL2 0x004 +#define QSERDES_V3_COM_FREQ_UPDATE 0x008 #define QSERDES_V3_COM_BG_TIMER 0x00c #define QSERDES_V3_COM_SSC_EN_CENTER 0x010 #define QSERDES_V3_COM_SSC_ADJ_PER1 0x014 @@ -146,6 +149,13 @@ #define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 #define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 #define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 +# define QSERDES_V3_COM_BIAS_EN 0x0001 +# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002 +# define QSERDES_V3_COM_CLKBUF_R_EN 0x0004 +# define QSERDES_V3_COM_CLKBUF_L_EN 0x0008 +# define QSERDES_V3_COM_EN_SYSCLK_TX_SEL 0x0010 +# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L 0x0020 +# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R 0x0040 #define QSERDES_V3_COM_CLK_ENABLE1 0x038 #define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c #define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 @@ -207,12 +217,36 @@ #define QSERDES_V3_COM_CMN_MODE 0x184 /* Only for QMP V3 PHY - TX registers */ +#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000 +#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008 +#define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c +# define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK 0x001f +# define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN 0x0020 + +#define QSERDES_V3_TX_TX_DRV_LVL 0x01c +# define DP_PHY_TXn_TX_DRV_LVL_MASK 0x001f +# define DP_PHY_TXn_TX_DRV_LVL_MUX_EN 0x0020 + +#define QSERDES_V3_TX_RESET_TSYNC_EN 0x024 +#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028 + +#define QSERDES_V3_TX_TX_BAND 0x02c +#define QSERDES_V3_TX_SLEW_CNTL 0x030 +#define QSERDES_V3_TX_INTERFACE_SELECT 0x034 +#define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c +#define QSERDES_V3_TX_RES_CODE_LANE_RX 0x040 #define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044 #define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048 #define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058 +#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN 0x05c #define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060 +#define QSERDES_V3_TX_TX_POL_INV 0x064 +#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068 #define QSERDES_V3_TX_LANE_MODE_1 0x08c #define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4 +#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0 +#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4 +#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0 /* Only for QMP V3 PHY - RX registers */ #define QSERDES_V3_RX_UCDR_FO_GAIN 0x008 @@ -315,6 +349,52 @@ #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4 0x5c #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60 +/* Only for QMP V3 PHY - DP PHY registers */ +#define QSERDES_V3_DP_PHY_REVISION_ID0 0x000 +#define QSERDES_V3_DP_PHY_REVISION_ID1 0x004 +#define QSERDES_V3_DP_PHY_REVISION_ID2 0x008 +#define QSERDES_V3_DP_PHY_REVISION_ID3 0x00c +#define QSERDES_V3_DP_PHY_CFG 0x010 +#define QSERDES_V3_DP_PHY_PD_CTL 0x018 +# define DP_PHY_PD_CTL_PWRDN 0x001 +# define DP_PHY_PD_CTL_PSR_PWRDN 0x002 +# define DP_PHY_PD_CTL_AUX_PWRDN 0x004 +# define DP_PHY_PD_CTL_LANE_0_1_PWRDN 0x008 +# define DP_PHY_PD_CTL_LANE_2_3_PWRDN 0x010 +# define DP_PHY_PD_CTL_PLL_PWRDN 0x020 +# define DP_PHY_PD_CTL_DP_CLAMP_EN 0x040 +#define QSERDES_V3_DP_PHY_MODE 0x01c +#define QSERDES_V3_DP_PHY_AUX_CFG0 0x020 +#define QSERDES_V3_DP_PHY_AUX_CFG1 0x024 +#define QSERDES_V3_DP_PHY_AUX_CFG2 0x028 +#define QSERDES_V3_DP_PHY_AUX_CFG3 0x02c +#define QSERDES_V3_DP_PHY_AUX_CFG4 0x030 +#define QSERDES_V3_DP_PHY_AUX_CFG5 0x034 +#define QSERDES_V3_DP_PHY_AUX_CFG6 0x038 +#define QSERDES_V3_DP_PHY_AUX_CFG7 0x03c +#define QSERDES_V3_DP_PHY_AUX_CFG8 0x040 +#define QSERDES_V3_DP_PHY_AUX_CFG9 0x044 + +#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK 0x048 +# define PHY_AUX_STOP_ERR_MASK 0x01 +# define PHY_AUX_DEC_ERR_MASK 0x02 +# define PHY_AUX_SYNC_ERR_MASK 0x04 +# define PHY_AUX_ALIGN_ERR_MASK 0x08 +# define PHY_AUX_REQ_ERR_MASK 0x10 + +#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_CLEAR 0x04c +#define QSERDES_V3_DP_PHY_AUX_BIST_CFG 0x050 + +#define QSERDES_V3_DP_PHY_VCO_DIV 0x064 +#define QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL 0x06c +#define QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL 0x088 + +#define QSERDES_V3_DP_PHY_SPARE0 0x0ac +#define DP_PHY_SPARE0_MASK 0x0f +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT 0x04(0x0004) + +#define QSERDES_V3_DP_PHY_STATUS 0x0c0 + /* Only for QMP V4 PHY - QSERDES COM registers */ #define QSERDES_V4_COM_SSC_EN_CENTER 0x010 #define QSERDES_V4_COM_SSC_PER1 0x01c diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c index ba3c197fc5b0..95dfa9fd284d 100644 --- a/drivers/phy/ralink/phy-ralink-usb.c +++ b/drivers/phy/ralink/phy-ralink-usb.c @@ -142,7 +142,7 @@ static int ralink_usb_phy_power_off(struct phy *_phy) return 0; } -static struct phy_ops ralink_usb_phy_ops = { +static const struct phy_ops ralink_usb_phy_ops = { .power_on = ralink_usb_phy_power_on, .power_off = ralink_usb_phy_power_off, .owner = THIS_MODULE, diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index 0824b9dd5683..c2f22f90736c 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -9,6 +9,18 @@ config PHY_ROCKCHIP_DP help Enable this to support the Rockchip Display Port PHY. +config PHY_ROCKCHIP_DPHY_RX0 + tristate "Rockchip MIPI Synopsys DPHY RX0 driver" + depends on ARCH_ROCKCHIP || COMPILE_TEST + select GENERIC_PHY_MIPI_DPHY + select GENERIC_PHY + help + Enable this to support the Rockchip MIPI Synopsys DPHY RX0 + associated to the Rockchip ISP module present in RK3399 SoCs. + + To compile this driver as a module, choose M here: the module + will be called phy-rockchip-dphy-rx0. + config PHY_ROCKCHIP_EMMC tristate "Rockchip EMMC PHY Driver" depends on ARCH_ROCKCHIP && OF diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index 9f59a81e4e0d..c3cfc7f0af5c 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c index 7c4df6d48c43..4df9476ef2a9 100644 --- a/drivers/staging/media/phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c +++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c @@ -16,6 +16,7 @@ */ #include <linux/clk.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/module.h> diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 0d818b77a0d8..cfa9b8b7e5ac 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -16,6 +16,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/iopoll.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/mutex.h> @@ -556,41 +557,25 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy) static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, u32 val, u32 cmd) { - u32 usec = 100; unsigned int result; + int err; writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - do { - result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1); - if (result & PHYREG1_CR_ACK) - break; - - udelay(1); - } while (usec-- > 0); - - if (!usec) { - dev_err(phy_drd->dev, - "CRPORT handshake timeout1 (0x%08x)\n", val); - return -ETIME; + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, (result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val); + return err; } - usec = 100; - writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - do { - result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1); - if (!(result & PHYREG1_CR_ACK)) - break; - - udelay(1); - } while (usec-- > 0); - - if (!usec) { - dev_err(phy_drd->dev, - "CRPORT handshake timeout2 (0x%08x)\n", val); - return -ETIME; + err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1, + result, !(result & PHYREG1_CR_ACK), 1, 100); + if (err == -ETIMEDOUT) { + dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val); + return err; } return 0; diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c index 9832599a0283..dd9ab1519d83 100644 --- a/drivers/phy/samsung/phy-samsung-ufs.c +++ b/drivers/phy/samsung/phy-samsung-ufs.c @@ -268,7 +268,7 @@ static int samsung_ufs_phy_exit(struct phy *phy) return 0; } -static struct phy_ops samsung_ufs_phy_ops = { +static const struct phy_ops samsung_ufs_phy_ops = { .init = samsung_ufs_phy_init, .exit = samsung_ufs_phy_exit, .power_on = samsung_ufs_phy_power_on, diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig index 8c9d7c37536a..a3970e0f89da 100644 --- a/drivers/phy/socionext/Kconfig +++ b/drivers/phy/socionext/Kconfig @@ -34,3 +34,13 @@ config PHY_UNIPHIER_PCIE help Enable this to support PHY implemented in PCIe controller on UniPhier SoCs. This driver supports LD20 and PXs3 SoCs. + +config PHY_UNIPHIER_AHCI + tristate "UniPhier AHCI PHY driver" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF && HAS_IOMEM + default SATA_AHCI_PLATFORM + select GENERIC_PHY + help + Enable this to support PHY implemented in AHCI controller + on UniPhier SoCs. This driver supports PXs2 and PXs3 SoCs. diff --git a/drivers/phy/socionext/Makefile b/drivers/phy/socionext/Makefile index 7dc9095b5bb7..e67c2da6675c 100644 --- a/drivers/phy/socionext/Makefile +++ b/drivers/phy/socionext/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PHY_UNIPHIER_USB2) += phy-uniphier-usb2.o obj-$(CONFIG_PHY_UNIPHIER_USB3) += phy-uniphier-usb3hs.o phy-uniphier-usb3ss.o obj-$(CONFIG_PHY_UNIPHIER_PCIE) += phy-uniphier-pcie.o +obj-$(CONFIG_PHY_UNIPHIER_AHCI) += phy-uniphier-ahci.o diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c new file mode 100644 index 000000000000..7427c40bf4ae --- /dev/null +++ b/drivers/phy/socionext/phy-uniphier-ahci.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * phy-uniphier-ahci.c - PHY driver for UniPhier AHCI controller + * Copyright 2016-2020, Socionext Inc. + * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/reset.h> + +struct uniphier_ahciphy_priv { + struct device *dev; + void __iomem *base; + struct clk *clk, *clk_parent; + struct reset_control *rst, *rst_parent; + const struct uniphier_ahciphy_soc_data *data; +}; + +struct uniphier_ahciphy_soc_data { + int (*init)(struct uniphier_ahciphy_priv *priv); + int (*power_on)(struct uniphier_ahciphy_priv *priv); + int (*power_off)(struct uniphier_ahciphy_priv *priv); + bool is_ready_high; + bool is_phy_clk; +}; + +/* for PXs2/PXs3 */ +#define CKCTRL 0x0 +#define CKCTRL_P0_READY BIT(15) +#define CKCTRL_P0_RESET BIT(10) +#define CKCTRL_REF_SSP_EN BIT(9) +#define TXCTRL0 0x4 +#define TXCTRL0_AMP_G3_MASK GENMASK(22, 16) +#define TXCTRL0_AMP_G2_MASK GENMASK(14, 8) +#define TXCTRL0_AMP_G1_MASK GENMASK(6, 0) +#define TXCTRL1 0x8 +#define TXCTRL1_DEEMPH_G3_MASK GENMASK(21, 16) +#define TXCTRL1_DEEMPH_G2_MASK GENMASK(13, 8) +#define TXCTRL1_DEEMPH_G1_MASK GENMASK(5, 0) +#define RXCTRL 0xc +#define RXCTRL_LOS_LVL_MASK GENMASK(20, 16) +#define RXCTRL_LOS_BIAS_MASK GENMASK(10, 8) +#define RXCTRL_RX_EQ_MASK GENMASK(2, 0) + +static void uniphier_ahciphy_pxs2_enable(struct uniphier_ahciphy_priv *priv, + bool enable) +{ + u32 val; + + val = readl(priv->base + CKCTRL); + + if (enable) { + val |= CKCTRL_REF_SSP_EN; + writel(val, priv->base + CKCTRL); + val &= ~CKCTRL_P0_RESET; + writel(val, priv->base + CKCTRL); + } else { + val |= CKCTRL_P0_RESET; + writel(val, priv->base + CKCTRL); + val &= ~CKCTRL_REF_SSP_EN; + writel(val, priv->base + CKCTRL); + } +} + +static int uniphier_ahciphy_pxs2_power_on(struct uniphier_ahciphy_priv *priv) +{ + int ret; + u32 val; + + uniphier_ahciphy_pxs2_enable(priv, true); + + /* wait until PLL is ready */ + if (priv->data->is_ready_high) + ret = readl_poll_timeout(priv->base + CKCTRL, val, + (val & CKCTRL_P0_READY), 200, 400); + else + ret = readl_poll_timeout(priv->base + CKCTRL, val, + !(val & CKCTRL_P0_READY), 200, 400); + if (ret) { + dev_err(priv->dev, "Failed to check whether PHY PLL is ready\n"); + uniphier_ahciphy_pxs2_enable(priv, false); + } + + return ret; +} + +static int uniphier_ahciphy_pxs2_power_off(struct uniphier_ahciphy_priv *priv) +{ + uniphier_ahciphy_pxs2_enable(priv, false); + + return 0; +} + +static int uniphier_ahciphy_pxs3_init(struct uniphier_ahciphy_priv *priv) +{ + int i; + u32 val; + + /* setup port parameter */ + val = readl(priv->base + TXCTRL0); + val &= ~TXCTRL0_AMP_G3_MASK; + val |= FIELD_PREP(TXCTRL0_AMP_G3_MASK, 0x73); + val &= ~TXCTRL0_AMP_G2_MASK; + val |= FIELD_PREP(TXCTRL0_AMP_G2_MASK, 0x46); + val &= ~TXCTRL0_AMP_G1_MASK; + val |= FIELD_PREP(TXCTRL0_AMP_G1_MASK, 0x42); + writel(val, priv->base + TXCTRL0); + + val = readl(priv->base + TXCTRL1); + val &= ~TXCTRL1_DEEMPH_G3_MASK; + val |= FIELD_PREP(TXCTRL1_DEEMPH_G3_MASK, 0x23); + val &= ~TXCTRL1_DEEMPH_G2_MASK; + val |= FIELD_PREP(TXCTRL1_DEEMPH_G2_MASK, 0x05); + val &= ~TXCTRL1_DEEMPH_G1_MASK; + val |= FIELD_PREP(TXCTRL1_DEEMPH_G1_MASK, 0x05); + + val = readl(priv->base + RXCTRL); + val &= ~RXCTRL_LOS_LVL_MASK; + val |= FIELD_PREP(RXCTRL_LOS_LVL_MASK, 0x9); + val &= ~RXCTRL_LOS_BIAS_MASK; + val |= FIELD_PREP(RXCTRL_LOS_BIAS_MASK, 0x2); + val &= ~RXCTRL_RX_EQ_MASK; + val |= FIELD_PREP(RXCTRL_RX_EQ_MASK, 0x1); + + /* dummy read 25 times to make a wait time for the phy to stabilize */ + for (i = 0; i < 25; i++) + readl(priv->base + CKCTRL); + + return 0; +} + +static int uniphier_ahciphy_init(struct phy *phy) +{ + struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = clk_prepare_enable(priv->clk_parent); + if (ret) + return ret; + + ret = reset_control_deassert(priv->rst_parent); + if (ret) + goto out_clk_disable; + + if (priv->data->init) { + ret = priv->data->init(priv); + if (ret) + goto out_rst_assert; + } + + return 0; + +out_rst_assert: + reset_control_assert(priv->rst_parent); +out_clk_disable: + clk_disable_unprepare(priv->clk_parent); + + return ret; +} + +static int uniphier_ahciphy_exit(struct phy *phy) +{ + struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy); + + reset_control_assert(priv->rst_parent); + clk_disable_unprepare(priv->clk_parent); + + return 0; +} + +static int uniphier_ahciphy_power_on(struct phy *phy) +{ + struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + ret = reset_control_deassert(priv->rst); + if (ret) + goto out_clk_disable; + + if (priv->data->power_on) { + ret = priv->data->power_on(priv); + if (ret) + goto out_reset_assert; + } + + return 0; + +out_reset_assert: + reset_control_assert(priv->rst); +out_clk_disable: + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int uniphier_ahciphy_power_off(struct phy *phy) +{ + struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->data->power_off) + ret = priv->data->power_off(priv); + + reset_control_assert(priv->rst); + clk_disable_unprepare(priv->clk); + + return ret; +} + +static const struct phy_ops uniphier_ahciphy_ops = { + .init = uniphier_ahciphy_init, + .exit = uniphier_ahciphy_exit, + .power_on = uniphier_ahciphy_power_on, + .power_off = uniphier_ahciphy_power_off, + .owner = THIS_MODULE, +}; + +static int uniphier_ahciphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_ahciphy_priv *priv; + struct phy *phy; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->data = of_device_get_match_data(dev); + if (WARN_ON(!priv->data)) + return -EINVAL; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->clk_parent = devm_clk_get(dev, "link"); + if (IS_ERR(priv->clk_parent)) + return PTR_ERR(priv->clk_parent); + + if (priv->data->is_phy_clk) { + priv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + } + + priv->rst_parent = devm_reset_control_get_shared(dev, "link"); + if (IS_ERR(priv->rst_parent)) + return PTR_ERR(priv->rst_parent); + + priv->rst = devm_reset_control_get_shared(dev, "phy"); + if (IS_ERR(priv->rst)) + return PTR_ERR(priv->rst); + + phy = devm_phy_create(dev, dev->of_node, &uniphier_ahciphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct uniphier_ahciphy_soc_data uniphier_pxs2_data = { + .power_on = uniphier_ahciphy_pxs2_power_on, + .power_off = uniphier_ahciphy_pxs2_power_off, + .is_ready_high = false, + .is_phy_clk = false, +}; + +static const struct uniphier_ahciphy_soc_data uniphier_pxs3_data = { + .init = uniphier_ahciphy_pxs3_init, + .power_on = uniphier_ahciphy_pxs2_power_on, + .power_off = uniphier_ahciphy_pxs2_power_off, + .is_ready_high = true, + .is_phy_clk = true, +}; + +static const struct of_device_id uniphier_ahciphy_match[] = { + { + .compatible = "socionext,uniphier-pxs2-ahci-phy", + .data = &uniphier_pxs2_data, + }, + { + .compatible = "socionext,uniphier-pxs3-ahci-phy", + .data = &uniphier_pxs3_data, + }, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, uniphier_ahciphy_match); + +static struct platform_driver uniphier_ahciphy_driver = { + .probe = uniphier_ahciphy_probe, + .driver = { + .name = "uniphier-ahci-phy", + .of_match_table = uniphier_ahciphy_match, + }, +}; +module_platform_driver(uniphier_ahciphy_driver); + +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); +MODULE_DESCRIPTION("UniPhier PHY driver for AHCI controller"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c index 819c49af169a..2ff56ce77b30 100644 --- a/drivers/phy/ti/phy-am654-serdes.c +++ b/drivers/phy/ti/phy-am654-serdes.c @@ -19,15 +19,38 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> +#define CMU_R004 0x4 +#define CMU_R060 0x60 #define CMU_R07C 0x7c - +#define CMU_R088 0x88 +#define CMU_R0D0 0xd0 +#define CMU_R0E8 0xe8 + +#define LANE_R048 0x248 +#define LANE_R058 0x258 +#define LANE_R06c 0x26c +#define LANE_R070 0x270 +#define LANE_R070 0x270 +#define LANE_R19C 0x39c + +#define COMLANE_R004 0xa04 #define COMLANE_R138 0xb38 -#define VERSION 0x70 +#define VERSION_VAL 0x70 #define COMLANE_R190 0xb90 - #define COMLANE_R194 0xb94 +#define COMRXEQ_R004 0x1404 +#define COMRXEQ_R008 0x1408 +#define COMRXEQ_R00C 0x140c +#define COMRXEQ_R014 0x1414 +#define COMRXEQ_R018 0x1418 +#define COMRXEQ_R01C 0x141c +#define COMRXEQ_R04C 0x144c +#define COMRXEQ_R088 0x1488 +#define COMRXEQ_R094 0x1494 +#define COMRXEQ_R098 0x1498 + #define SERDES_CTRL 0x1fd0 #define WIZ_LANEXCTL_STS 0x1fe0 @@ -80,27 +103,136 @@ static const struct regmap_config serdes_am654_regmap_config = { .max_register = 0x1ffc, }; -static const struct reg_field cmu_master_cdn_o = REG_FIELD(CMU_R07C, 24, 24); -static const struct reg_field config_version = REG_FIELD(COMLANE_R138, 16, 23); -static const struct reg_field l1_master_cdn_o = REG_FIELD(COMLANE_R190, 9, 9); -static const struct reg_field cmu_ok_i_0 = REG_FIELD(COMLANE_R194, 19, 19); -static const struct reg_field por_en = REG_FIELD(SERDES_CTRL, 29, 29); -static const struct reg_field tx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31); -static const struct reg_field rx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15); -static const struct reg_field pll_enable = REG_FIELD(WIZ_PLL_CTRL, 29, 31); -static const struct reg_field pll_ok = REG_FIELD(WIZ_PLL_CTRL, 28, 28); +enum serdes_am654_fields { + /* CMU PLL Control */ + CMU_PLL_CTRL, + + LANE_PLL_CTRL_RXEQ_RXIDLE, + + /* CMU VCO bias current and VREG setting */ + AHB_PMA_CM_VCO_VBIAS_VREG, + AHB_PMA_CM_VCO_BIAS_VREG, + + AHB_PMA_CM_SR, + AHB_SSC_GEN_Z_O_20_13, + + /* AHB PMA Lane Configuration */ + AHB_PMA_LN_AGC_THSEL_VREGH, + + /* AGC and Signal detect threshold for Gen3 */ + AHB_PMA_LN_GEN3_AGC_SD_THSEL, + + AHB_PMA_LN_RX_SELR_GEN3, + AHB_PMA_LN_TX_DRV, + + /* CMU Master Reset */ + CMU_MASTER_CDN, + + /* P2S ring buffer initial startup pointer difference */ + P2S_RBUF_PTR_DIFF, + + CONFIG_VERSION, + + /* Lane 1 Master Reset */ + L1_MASTER_CDN, + + /* CMU OK Status */ + CMU_OK_I_0, + + /* Mid-speed initial calibration control */ + COMRXEQ_MS_INIT_CTRL_7_0, + + /* High-speed initial calibration control */ + COMRXEQ_HS_INIT_CAL_7_0, + + /* Mid-speed recalibration control */ + COMRXEQ_MS_RECAL_CTRL_7_0, + + /* High-speed recalibration control */ + COMRXEQ_HS_RECAL_CTRL_7_0, + + /* ATT configuration */ + COMRXEQ_CSR_ATT_CONFIG, + + /* Edge based boost adaptation window length */ + COMRXEQ_CSR_EBSTADAPT_WIN_LEN, + + /* COMRXEQ control 3 & 4 */ + COMRXEQ_CTRL_3_4, + + /* COMRXEQ control 14, 15 and 16*/ + COMRXEQ_CTRL_14_15_16, + + /* Threshold for errors in pattern data */ + COMRXEQ_CSR_DLEV_ERR_THRESH, + + /* COMRXEQ control 25 */ + COMRXEQ_CTRL_25, + + /* Mid-speed rate change calibration control */ + CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O, + + /* High-speed rate change calibration control */ + COMRXEQ_HS_RCHANGE_CTRL_7_0, + + /* Serdes reset */ + POR_EN, + + /* Tx Enable Value */ + TX0_ENABLE, + + /* Rx Enable Value */ + RX0_ENABLE, + + /* PLL Enable Value */ + PLL_ENABLE, + + /* PLL ready for use */ + PLL_OK, + + /* sentinel */ + MAX_FIELDS + +}; + +static const struct reg_field serdes_am654_reg_fields[] = { + [CMU_PLL_CTRL] = REG_FIELD(CMU_R004, 8, 15), + [AHB_PMA_CM_VCO_VBIAS_VREG] = REG_FIELD(CMU_R060, 8, 15), + [CMU_MASTER_CDN] = REG_FIELD(CMU_R07C, 24, 31), + [AHB_PMA_CM_VCO_BIAS_VREG] = REG_FIELD(CMU_R088, 24, 31), + [AHB_PMA_CM_SR] = REG_FIELD(CMU_R0D0, 24, 31), + [AHB_SSC_GEN_Z_O_20_13] = REG_FIELD(CMU_R0E8, 8, 15), + [LANE_PLL_CTRL_RXEQ_RXIDLE] = REG_FIELD(LANE_R048, 8, 15), + [AHB_PMA_LN_AGC_THSEL_VREGH] = REG_FIELD(LANE_R058, 16, 23), + [AHB_PMA_LN_GEN3_AGC_SD_THSEL] = REG_FIELD(LANE_R06c, 0, 7), + [AHB_PMA_LN_RX_SELR_GEN3] = REG_FIELD(LANE_R070, 16, 23), + [AHB_PMA_LN_TX_DRV] = REG_FIELD(LANE_R19C, 16, 23), + [P2S_RBUF_PTR_DIFF] = REG_FIELD(COMLANE_R004, 0, 7), + [CONFIG_VERSION] = REG_FIELD(COMLANE_R138, 16, 23), + [L1_MASTER_CDN] = REG_FIELD(COMLANE_R190, 8, 15), + [CMU_OK_I_0] = REG_FIELD(COMLANE_R194, 19, 19), + [COMRXEQ_MS_INIT_CTRL_7_0] = REG_FIELD(COMRXEQ_R004, 24, 31), + [COMRXEQ_HS_INIT_CAL_7_0] = REG_FIELD(COMRXEQ_R008, 0, 7), + [COMRXEQ_MS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 8, 15), + [COMRXEQ_HS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 16, 23), + [COMRXEQ_CSR_ATT_CONFIG] = REG_FIELD(COMRXEQ_R014, 16, 23), + [COMRXEQ_CSR_EBSTADAPT_WIN_LEN] = REG_FIELD(COMRXEQ_R018, 16, 23), + [COMRXEQ_CTRL_3_4] = REG_FIELD(COMRXEQ_R01C, 8, 15), + [COMRXEQ_CTRL_14_15_16] = REG_FIELD(COMRXEQ_R04C, 0, 7), + [COMRXEQ_CSR_DLEV_ERR_THRESH] = REG_FIELD(COMRXEQ_R088, 16, 23), + [COMRXEQ_CTRL_25] = REG_FIELD(COMRXEQ_R094, 24, 31), + [CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O] = REG_FIELD(COMRXEQ_R098, 8, 15), + [COMRXEQ_HS_RCHANGE_CTRL_7_0] = REG_FIELD(COMRXEQ_R098, 16, 23), + [POR_EN] = REG_FIELD(SERDES_CTRL, 29, 29), + [TX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31), + [RX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15), + [PLL_ENABLE] = REG_FIELD(WIZ_PLL_CTRL, 29, 31), + [PLL_OK] = REG_FIELD(WIZ_PLL_CTRL, 28, 28), +}; struct serdes_am654 { struct regmap *regmap; - struct regmap_field *cmu_master_cdn_o; - struct regmap_field *config_version; - struct regmap_field *l1_master_cdn_o; - struct regmap_field *cmu_ok_i_0; - struct regmap_field *por_en; - struct regmap_field *tx0_enable; - struct regmap_field *rx0_enable; - struct regmap_field *pll_enable; - struct regmap_field *pll_ok; + struct regmap_field *fields[MAX_FIELDS]; struct device *dev; struct mux_control *control; @@ -116,12 +248,12 @@ static int serdes_am654_enable_pll(struct serdes_am654 *phy) int ret; u32 val; - ret = regmap_field_write(phy->pll_enable, PLL_ENABLE_STATE); + ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_ENABLE_STATE); if (ret) return ret; - return regmap_field_read_poll_timeout(phy->pll_ok, val, val, 1000, - PLL_LOCK_TIME); + return regmap_field_read_poll_timeout(phy->fields[PLL_OK], val, val, + 1000, PLL_LOCK_TIME); } static void serdes_am654_disable_pll(struct serdes_am654 *phy) @@ -129,41 +261,39 @@ static void serdes_am654_disable_pll(struct serdes_am654 *phy) struct device *dev = phy->dev; int ret; - ret = regmap_field_write(phy->pll_enable, PLL_DISABLE_STATE); + ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_DISABLE_STATE); if (ret) dev_err(dev, "Failed to disable PLL\n"); } static int serdes_am654_enable_txrx(struct serdes_am654 *phy) { - int ret; + int ret = 0; /* Enable TX */ - ret = regmap_field_write(phy->tx0_enable, TX0_ENABLE_STATE); - if (ret) - return ret; + ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_ENABLE_STATE); /* Enable RX */ - ret = regmap_field_write(phy->rx0_enable, RX0_ENABLE_STATE); + ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_ENABLE_STATE); + if (ret) - return ret; + return -EIO; return 0; } static int serdes_am654_disable_txrx(struct serdes_am654 *phy) { - int ret; + int ret = 0; /* Disable TX */ - ret = regmap_field_write(phy->tx0_enable, TX0_DISABLE_STATE); - if (ret) - return ret; + ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_DISABLE_STATE); /* Disable RX */ - ret = regmap_field_write(phy->rx0_enable, RX0_DISABLE_STATE); + ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_DISABLE_STATE); + if (ret) - return ret; + return -EIO; return 0; } @@ -187,8 +317,8 @@ static int serdes_am654_power_on(struct phy *x) return ret; } - return regmap_field_read_poll_timeout(phy->cmu_ok_i_0, val, val, - SLEEP_TIME, PLL_LOCK_TIME); + return regmap_field_read_poll_timeout(phy->fields[CMU_OK_I_0], val, + val, SLEEP_TIME, PLL_LOCK_TIME); } static int serdes_am654_power_off(struct phy *x) @@ -286,19 +416,37 @@ static int serdes_am654_usb3_init(struct serdes_am654 *phy) static int serdes_am654_pcie_init(struct serdes_am654 *phy) { - int ret; - - ret = regmap_field_write(phy->config_version, VERSION); - if (ret) - return ret; + int ret = 0; - ret = regmap_field_write(phy->cmu_master_cdn_o, 0x1); - if (ret) - return ret; + ret |= regmap_field_write(phy->fields[CMU_PLL_CTRL], 0x2); + ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_VBIAS_VREG], 0x98); + ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_BIAS_VREG], 0x98); + ret |= regmap_field_write(phy->fields[AHB_PMA_CM_SR], 0x45); + ret |= regmap_field_write(phy->fields[AHB_SSC_GEN_Z_O_20_13], 0xe); + ret |= regmap_field_write(phy->fields[LANE_PLL_CTRL_RXEQ_RXIDLE], 0x5); + ret |= regmap_field_write(phy->fields[AHB_PMA_LN_AGC_THSEL_VREGH], 0x83); + ret |= regmap_field_write(phy->fields[AHB_PMA_LN_GEN3_AGC_SD_THSEL], 0x83); + ret |= regmap_field_write(phy->fields[AHB_PMA_LN_RX_SELR_GEN3], 0x81); + ret |= regmap_field_write(phy->fields[AHB_PMA_LN_TX_DRV], 0x3b); + ret |= regmap_field_write(phy->fields[P2S_RBUF_PTR_DIFF], 0x3); + ret |= regmap_field_write(phy->fields[CONFIG_VERSION], VERSION_VAL); + ret |= regmap_field_write(phy->fields[COMRXEQ_MS_INIT_CTRL_7_0], 0xf); + ret |= regmap_field_write(phy->fields[COMRXEQ_HS_INIT_CAL_7_0], 0x4f); + ret |= regmap_field_write(phy->fields[COMRXEQ_MS_RECAL_CTRL_7_0], 0xf); + ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RECAL_CTRL_7_0], 0x4f); + ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_ATT_CONFIG], 0x7); + ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_EBSTADAPT_WIN_LEN], 0x7f); + ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_3_4], 0xf); + ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_14_15_16], 0x9a); + ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_DLEV_ERR_THRESH], 0x32); + ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_25], 0x80); + ret |= regmap_field_write(phy->fields[CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O], 0xf); + ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RCHANGE_CTRL_7_0], 0x4f); + ret |= regmap_field_write(phy->fields[CMU_MASTER_CDN], 0x1); + ret |= regmap_field_write(phy->fields[L1_MASTER_CDN], 0x2); - ret = regmap_field_write(phy->l1_master_cdn_o, 0x1); if (ret) - return ret; + return -EIO; return 0; } @@ -320,20 +468,19 @@ static int serdes_am654_init(struct phy *x) static int serdes_am654_reset(struct phy *x) { struct serdes_am654 *phy = phy_get_drvdata(x); - int ret; + int ret = 0; serdes_am654_disable_pll(phy); serdes_am654_disable_txrx(phy); - ret = regmap_field_write(phy->por_en, 0x1); - if (ret) - return ret; + ret |= regmap_field_write(phy->fields[POR_EN], 0x1); mdelay(1); - ret = regmap_field_write(phy->por_en, 0x0); + ret |= regmap_field_write(phy->fields[POR_EN], 0x0); + if (ret) - return ret; + return -EIO; return 0; } @@ -587,66 +734,16 @@ static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy) { struct regmap *regmap = am654_phy->regmap; struct device *dev = am654_phy->dev; + int i; - am654_phy->cmu_master_cdn_o = devm_regmap_field_alloc(dev, regmap, - cmu_master_cdn_o); - if (IS_ERR(am654_phy->cmu_master_cdn_o)) { - dev_err(dev, "CMU_MASTER_CDN_O reg field init failed\n"); - return PTR_ERR(am654_phy->cmu_master_cdn_o); - } - - am654_phy->config_version = devm_regmap_field_alloc(dev, regmap, - config_version); - if (IS_ERR(am654_phy->config_version)) { - dev_err(dev, "CONFIG_VERSION reg field init failed\n"); - return PTR_ERR(am654_phy->config_version); - } - - am654_phy->l1_master_cdn_o = devm_regmap_field_alloc(dev, regmap, - l1_master_cdn_o); - if (IS_ERR(am654_phy->l1_master_cdn_o)) { - dev_err(dev, "L1_MASTER_CDN_O reg field init failed\n"); - return PTR_ERR(am654_phy->l1_master_cdn_o); - } - - am654_phy->cmu_ok_i_0 = devm_regmap_field_alloc(dev, regmap, - cmu_ok_i_0); - if (IS_ERR(am654_phy->cmu_ok_i_0)) { - dev_err(dev, "CMU_OK_I_0 reg field init failed\n"); - return PTR_ERR(am654_phy->cmu_ok_i_0); - } - - am654_phy->por_en = devm_regmap_field_alloc(dev, regmap, por_en); - if (IS_ERR(am654_phy->por_en)) { - dev_err(dev, "POR_EN reg field init failed\n"); - return PTR_ERR(am654_phy->por_en); - } - - am654_phy->tx0_enable = devm_regmap_field_alloc(dev, regmap, - tx0_enable); - if (IS_ERR(am654_phy->tx0_enable)) { - dev_err(dev, "TX0_ENABLE reg field init failed\n"); - return PTR_ERR(am654_phy->tx0_enable); - } - - am654_phy->rx0_enable = devm_regmap_field_alloc(dev, regmap, - rx0_enable); - if (IS_ERR(am654_phy->rx0_enable)) { - dev_err(dev, "RX0_ENABLE reg field init failed\n"); - return PTR_ERR(am654_phy->rx0_enable); - } - - am654_phy->pll_enable = devm_regmap_field_alloc(dev, regmap, - pll_enable); - if (IS_ERR(am654_phy->pll_enable)) { - dev_err(dev, "PLL_ENABLE reg field init failed\n"); - return PTR_ERR(am654_phy->pll_enable); - } - - am654_phy->pll_ok = devm_regmap_field_alloc(dev, regmap, pll_ok); - if (IS_ERR(am654_phy->pll_ok)) { - dev_err(dev, "PLL_OK reg field init failed\n"); - return PTR_ERR(am654_phy->pll_ok); + for (i = 0; i < MAX_FIELDS; i++) { + am654_phy->fields[i] = devm_regmap_field_alloc(dev, + regmap, + serdes_am654_reg_fields[i]); + if (IS_ERR(am654_phy->fields[i])) { + dev_err(dev, "Unable to allocate regmap field %d\n", i); + return PTR_ERR(am654_phy->fields[i]); + } } return 0; diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c index 7edd5c3bc536..5fd2e8a08bfc 100644 --- a/drivers/phy/ti/phy-gmii-sel.c +++ b/drivers/phy/ti/phy-gmii-sel.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/mfd/syscon.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_net.h> #include <linux/phy.h> #include <linux/phy/phy.h> @@ -22,7 +23,7 @@ #define AM33XX_GMII_SEL_MODE_RGMII 2 enum { - PHY_GMII_SEL_PORT_MODE, + PHY_GMII_SEL_PORT_MODE = 0, PHY_GMII_SEL_RGMII_ID_MODE, PHY_GMII_SEL_RMII_IO_CLK_EN, PHY_GMII_SEL_LAST, @@ -41,6 +42,7 @@ struct phy_gmii_sel_soc_data { u32 num_ports; u32 features; const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; + bool use_of_data; }; struct phy_gmii_sel_priv { @@ -49,6 +51,8 @@ struct phy_gmii_sel_priv { struct regmap *regmap; struct phy_provider *phy_provider; struct phy_gmii_sel_phy_priv *if_phys; + u32 num_ports; + u32 reg_offset; }; static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode) @@ -147,13 +151,9 @@ static const struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = { { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1), - [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0), - [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0), }, { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5), - [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0), - [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0), }, }; @@ -172,16 +172,19 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = { static const struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = { - { - [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4040, 0, 1), - [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0), - [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0), - }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2), }, + { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2), }, }; static const struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = { - .num_ports = 1, + .use_of_data = true, .regfields = phy_gmii_sel_fields_am654, }; @@ -228,7 +231,7 @@ static struct phy *phy_gmii_sel_of_xlate(struct device *dev, if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) && args->args_count < 2) return ERR_PTR(-EINVAL); - if (phy_id > priv->soc_data->num_ports) + if (phy_id > priv->num_ports) return ERR_PTR(-EINVAL); if (phy_id != priv->if_phys[phy_id - 1].id) return ERR_PTR(-EINVAL); @@ -242,68 +245,97 @@ static struct phy *phy_gmii_sel_of_xlate(struct device *dev, return priv->if_phys[phy_id].if_phy; } -static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv) +static int phy_gmii_init_phy(struct phy_gmii_sel_priv *priv, int port, + struct phy_gmii_sel_phy_priv *if_phy) { const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data; struct device *dev = priv->dev; + const struct reg_field *fields; + struct regmap_field *regfield; + struct reg_field field; + int ret; + + if_phy->id = port; + if_phy->priv = priv; + + fields = soc_data->regfields[port - 1]; + field = *fields++; + field.reg += priv->reg_offset; + dev_dbg(dev, "%s field %x %d %d\n", __func__, + field.reg, field.msb, field.lsb); + + regfield = devm_regmap_field_alloc(dev, priv->regmap, field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phy->fields[PHY_GMII_SEL_PORT_MODE] = regfield; + + field = *fields++; + field.reg += priv->reg_offset; + if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE)) { + regfield = devm_regmap_field_alloc(dev, + priv->regmap, + field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE] = regfield; + dev_dbg(dev, "%s field %x %d %d\n", __func__, + field.reg, field.msb, field.lsb); + } + + field = *fields; + field.reg += priv->reg_offset; + if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN)) { + regfield = devm_regmap_field_alloc(dev, + priv->regmap, + field); + if (IS_ERR(regfield)) + return PTR_ERR(regfield); + if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = regfield; + dev_dbg(dev, "%s field %x %d %d\n", __func__, + field.reg, field.msb, field.lsb); + } + + if_phy->if_phy = devm_phy_create(dev, + priv->dev->of_node, + &phy_gmii_sel_ops); + if (IS_ERR(if_phy->if_phy)) { + ret = PTR_ERR(if_phy->if_phy); + dev_err(dev, "Failed to create phy%d %d\n", port, ret); + return ret; + } + phy_set_drvdata(if_phy->if_phy, if_phy); + + return 0; +} + +static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv) +{ + const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data; struct phy_gmii_sel_phy_priv *if_phys; - int i, num_ports, ret; + struct device *dev = priv->dev; + int i, ret; - num_ports = priv->soc_data->num_ports; + if (soc_data->use_of_data) { + const __be32 *offset; + u64 size; - if_phys = devm_kcalloc(priv->dev, num_ports, + offset = of_get_address(dev->of_node, 0, &size, NULL); + priv->num_ports = size / sizeof(u32); + if (!priv->num_ports) + return -EINVAL; + priv->reg_offset = __be32_to_cpu(*offset); + } + + if_phys = devm_kcalloc(dev, priv->num_ports, sizeof(*if_phys), GFP_KERNEL); if (!if_phys) return -ENOMEM; - dev_dbg(dev, "%s %d\n", __func__, num_ports); - - for (i = 0; i < num_ports; i++) { - const struct reg_field *field; - struct regmap_field *regfield; + dev_dbg(dev, "%s %d\n", __func__, priv->num_ports); - if_phys[i].id = i + 1; - if_phys[i].priv = priv; - - field = &soc_data->regfields[i][PHY_GMII_SEL_PORT_MODE]; - dev_dbg(dev, "%s field %x %d %d\n", __func__, - field->reg, field->msb, field->lsb); - - regfield = devm_regmap_field_alloc(dev, priv->regmap, *field); - if (IS_ERR(regfield)) - return PTR_ERR(regfield); - if_phys[i].fields[PHY_GMII_SEL_PORT_MODE] = regfield; - - field = &soc_data->regfields[i][PHY_GMII_SEL_RGMII_ID_MODE]; - if (field->reg != (~0)) { - regfield = devm_regmap_field_alloc(dev, - priv->regmap, - *field); - if (IS_ERR(regfield)) - return PTR_ERR(regfield); - if_phys[i].fields[PHY_GMII_SEL_RGMII_ID_MODE] = - regfield; - } - - field = &soc_data->regfields[i][PHY_GMII_SEL_RMII_IO_CLK_EN]; - if (field->reg != (~0)) { - regfield = devm_regmap_field_alloc(dev, - priv->regmap, - *field); - if (IS_ERR(regfield)) - return PTR_ERR(regfield); - if_phys[i].fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = - regfield; - } - - if_phys[i].if_phy = devm_phy_create(dev, - priv->dev->of_node, - &phy_gmii_sel_ops); - if (IS_ERR(if_phys[i].if_phy)) { - ret = PTR_ERR(if_phys[i].if_phy); - dev_err(dev, "Failed to create phy%d %d\n", i, ret); + for (i = 0; i < priv->num_ports; i++) { + ret = phy_gmii_init_phy(priv, i + 1, &if_phys[i]); + if (ret) return ret; - } - phy_set_drvdata(if_phys[i].if_phy, &if_phys[i]); } priv->if_phys = if_phys; @@ -328,6 +360,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev) priv->dev = &pdev->dev; priv->soc_data = of_id->data; + priv->num_ports = priv->soc_data->num_ports; priv->regmap = syscon_node_to_regmap(node->parent); if (IS_ERR(priv->regmap)) { diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c index 33c4cf0105a4..c9cfafe89cbf 100644 --- a/drivers/phy/ti/phy-j721e-wiz.c +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -20,7 +20,6 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/reset-controller.h> -#include <dt-bindings/phy/phy.h> #define WIZ_SERDES_CTRL 0x404 #define WIZ_SERDES_TOP_CTRL 0x408 diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c index 507f79d14adb..4fec90d2624f 100644 --- a/drivers/phy/ti/phy-omap-usb2.c +++ b/drivers/phy/ti/phy-omap-usb2.c @@ -6,23 +6,23 @@ * Author: Kishon Vijay Abraham I <kishon@ti.com> */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/io.h> -#include <linux/phy/omap_usb.h> -#include <linux/usb/phy_companion.h> #include <linux/clk.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> #include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <linux/phy/omap_control_phy.h> +#include <linux/phy/omap_usb.h> #include <linux/phy/phy.h> -#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/regmap.h> -#include <linux/of_platform.h> +#include <linux/slab.h> #include <linux/sys_soc.h> +#include <linux/usb/phy_companion.h> #define USB2PHY_ANA_CONFIG1 0x4c #define USB2PHY_DISCON_BYP_LATCH BIT(31) @@ -89,7 +89,7 @@ static inline void omap_usb_writel(void __iomem *addr, unsigned int offset, } /** - * omap_usb2_set_comparator - links the comparator present in the sytem with + * omap_usb2_set_comparator - links the comparator present in the system with * this phy * @comparator - the companion phy(comparator) for this phy * @@ -142,7 +142,7 @@ static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) } static int omap_usb_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) + struct usb_gadget *gadget) { otg->gadget = gadget; if (!gadget) @@ -409,7 +409,7 @@ static int omap_usb2_probe(struct platform_device *pdev) return PTR_ERR(phy->phy_base); phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node, - "syscon-phy-power"); + "syscon-phy-power"); if (IS_ERR(phy->syscon_phy_power)) { dev_dbg(&pdev->dev, "can't get syscon-phy-power, using control device\n"); @@ -438,7 +438,6 @@ static int omap_usb2_probe(struct platform_device *pdev) } } - phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER) @@ -452,10 +451,10 @@ static int omap_usb2_probe(struct platform_device *pdev) if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER) dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); return PTR_ERR(phy->wkupclk); - } else { - dev_warn(&pdev->dev, - "found usb_phy_cm_clk32k, please fix DTS\n"); } + + dev_warn(&pdev->dev, + "found usb_phy_cm_clk32k, please fix DTS\n"); } phy->optclk = devm_clk_get(phy->dev, "refclk"); @@ -504,7 +503,6 @@ static int omap_usb2_probe(struct platform_device *pdev) return PTR_ERR(phy_provider); } - usb_add_phy_dev(&phy->phy); return 0; diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index d9efbfd29646..97e848740e13 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -140,6 +140,17 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_RASPBERRYPI + tristate "Raspberry Pi 4 Firmware Reset Driver" + depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + default USB_XHCI_PCI + help + Raspberry Pi 4's co-processor controls some of the board's HW + initialization process, but it's up to Linux to trigger it when + relevant. This driver provides a reset controller capable of + interfacing with RPi4's co-processor and model these firmware + initialization routines as reset lines. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 249ed357c997..16947610cc3b 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o +obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c new file mode 100644 index 000000000000..02f59c06f69b --- /dev/null +++ b/drivers/reset/reset-raspberrypi.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi 4 firmware reset driver + * + * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <soc/bcm2835/raspberrypi-firmware.h> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + +struct rpi_reset { + struct reset_controller_dev rcdev; + struct rpi_firmware *fw; +}; + +static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct rpi_reset, rcdev); +} + +static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct rpi_reset *priv = to_rpi(rcdev); + u32 dev_addr; + int ret; + + switch (id) { + case RASPBERRYPI_FIRMWARE_RESET_ID_USB: + /* + * The Raspberry Pi 4 gets its USB functionality from VL805, a + * PCIe chip that implements xHCI. After a PCI reset, VL805's + * firmware may either be loaded directly from an EEPROM or, if + * not present, by the SoC's co-processor, VideoCore. rpi's + * VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This triggers the + * aforementioned process. + * + * The pci device address is expected is expected by the + * firmware encoded like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since rpi's PCIe is hardwired, we know the address in + * advance. + */ + dev_addr = 0x100000; + ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static const struct reset_control_ops rpi_reset_ops = { + .reset = rpi_reset_reset, +}; + +static int rpi_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rpi_firmware *fw; + struct device_node *np; + struct rpi_reset *priv; + + np = of_get_parent(dev->of_node); + if (!np) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(np); + of_node_put(np); + if (!fw) + return -EPROBE_DEFER; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + priv->fw = fw; + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS; + priv->rcdev.ops = &rpi_reset_ops; + priv->rcdev.of_node = dev->of_node; + + return devm_reset_controller_register(dev, &priv->rcdev); +} + +static const struct of_device_id rpi_reset_of_match[] = { + { .compatible = "raspberrypi,firmware-reset" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rpi_reset_of_match); + +static struct platform_driver rpi_reset_driver = { + .probe = rpi_reset_probe, + .driver = { + .name = "raspberrypi-reset", + .of_match_table = rpi_reset_of_match, + }, +}; +module_platform_driver(rpi_reset_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); +MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 0f9d159a1477..747c6cf1d795 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -44,8 +44,6 @@ source "drivers/staging/media/tegra-video/Kconfig" source "drivers/staging/media/ipu3/Kconfig" -source "drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig" - source "drivers/staging/media/rkisp1/Kconfig" endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 965a8b0e6cf2..b59571826ba6 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -10,6 +10,5 @@ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/ obj-$(CONFIG_TEGRA_VDE) += tegra-vde/ obj-$(CONFIG_VIDEO_HANTRO) += hantro/ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ -obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0/ obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1) += rkisp1/ obj-$(CONFIG_VIDEO_ZORAN) += zoran/ diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig b/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig deleted file mode 100644 index fb74df829371..000000000000 --- a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config PHY_ROCKCHIP_DPHY_RX0 - tristate "Rockchip MIPI Synopsys DPHY RX0 driver" - depends on ARCH_ROCKCHIP || COMPILE_TEST - select GENERIC_PHY_MIPI_DPHY - select GENERIC_PHY - help - Enable this to support the Rockchip MIPI Synopsys DPHY RX0 - associated to the Rockchip ISP module present in RK3399 SoCs. - - To compile this driver as a module, choose M here: the module - will be called phy-rockchip-dphy-rx0. diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile b/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile deleted file mode 100644 index 507e5d0593ab..000000000000 --- a/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/TODO b/drivers/staging/media/phy-rockchip-dphy-rx0/TODO deleted file mode 100644 index ab612e5b27dc..000000000000 --- a/drivers/staging/media/phy-rockchip-dphy-rx0/TODO +++ /dev/null @@ -1,6 +0,0 @@ -The main reason for keeping this in staging is because the only driver -that uses this is rkisp1, which is also in staging. It should be moved together -with rkisp1. - -Please CC patches to Linux Media <linux-media@vger.kernel.org> and -Helen Koike <helen.koike@collabora.com>. diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig index 354e61c0f2e5..7fc058f81d00 100644 --- a/drivers/thunderbolt/Kconfig +++ b/drivers/thunderbolt/Kconfig @@ -16,7 +16,19 @@ menuconfig USB4 To compile this driver a module, choose M here. The module will be called thunderbolt. +if USB4 + +config USB4_DEBUGFS_WRITE + bool "Enable write by debugfs to configuration spaces (DANGEROUS)" + help + Enables writing to device configuration registers through + debugfs interface. + + Only enable this if you know what you are doing! Never enable + this for production systems or distro kernels. + config USB4_KUNIT_TEST bool "KUnit tests" depends on KUNIT=y - depends on USB4=y + +endif # USB4 diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile index 4ab5bfad7bfd..571537371072 100644 --- a/drivers/thunderbolt/Makefile +++ b/drivers/thunderbolt/Makefile @@ -4,4 +4,6 @@ thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o ee thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o thunderbolt-objs += nvm.o retimer.o quirks.o -obj-${CONFIG_USB4_KUNIT_TEST} += test.o +thunderbolt-${CONFIG_ACPI} += acpi.o +thunderbolt-$(CONFIG_DEBUG_FS) += debugfs.o +thunderbolt-${CONFIG_USB4_KUNIT_TEST} += test.o diff --git a/drivers/thunderbolt/acpi.c b/drivers/thunderbolt/acpi.c new file mode 100644 index 000000000000..a5f988a9f948 --- /dev/null +++ b/drivers/thunderbolt/acpi.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ACPI support + * + * Copyright (C) 2020, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + */ + +#include <linux/acpi.h> + +#include "tb.h" + +static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data, + void **return_value) +{ + struct fwnode_reference_args args; + struct fwnode_handle *fwnode; + struct tb_nhi *nhi = data; + struct acpi_device *adev; + struct pci_dev *pdev; + struct device *dev; + int ret; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + fwnode = acpi_fwnode_handle(adev); + ret = fwnode_property_get_reference_args(fwnode, "usb4-host-interface", + NULL, 0, 0, &args); + if (ret) + return AE_OK; + + /* It needs to reference this NHI */ + if (nhi->pdev->dev.fwnode != args.fwnode) + goto out_put; + + /* + * Try to find physical device walking upwards to the hierarcy. + * We need to do this because the xHCI driver might not yet be + * bound so the USB3 SuperSpeed ports are not yet created. + */ + dev = acpi_get_first_physical_node(adev); + while (!dev) { + adev = adev->parent; + if (!adev) + break; + dev = acpi_get_first_physical_node(adev); + } + + if (!dev) + goto out_put; + + /* + * Check that the device is PCIe. This is because USB3 + * SuperSpeed ports have this property and they are not power + * managed with the xHCI and the SuperSpeed hub so we create the + * link from xHCI instead. + */ + while (!dev_is_pci(dev)) + dev = dev->parent; + + if (!dev) + goto out_put; + + /* + * Check that this actually matches the type of device we + * expect. It should either be xHCI or PCIe root/downstream + * port. + */ + pdev = to_pci_dev(dev); + if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI || + (pci_is_pcie(pdev) && + (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || + pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))) { + const struct device_link *link; + + link = device_link_add(&pdev->dev, &nhi->pdev->dev, + DL_FLAG_AUTOREMOVE_SUPPLIER | + DL_FLAG_PM_RUNTIME); + if (link) { + dev_dbg(&nhi->pdev->dev, "created link from %s\n", + dev_name(&pdev->dev)); + } else { + dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n", + dev_name(&pdev->dev)); + } + } + +out_put: + fwnode_handle_put(args.fwnode); + return AE_OK; +} + +/** + * tb_acpi_add_links() - Add device links based on ACPI description + * @nhi: Pointer to NHI + * + * Goes over ACPI namespace finding tunneled ports that reference to + * @nhi ACPI node. For each reference a device link is added. The link + * is automatically removed by the driver core. + */ +void tb_acpi_add_links(struct tb_nhi *nhi) +{ + acpi_status status; + + if (!has_acpi_companion(&nhi->pdev->dev)) + return; + + /* + * Find all devices that have usb4-host-controller interface + * property that references to this NHI. + */ + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, 32, + tb_acpi_add_link, NULL, nhi, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&nhi->pdev->dev, "failed to enumerate tunneled ports\n"); +} diff --git a/drivers/thunderbolt/cap.c b/drivers/thunderbolt/cap.c index 19db6cdc5b70..6f571e912cf2 100644 --- a/drivers/thunderbolt/cap.c +++ b/drivers/thunderbolt/cap.c @@ -15,14 +15,6 @@ #define VSE_CAP_OFFSET_MAX 0xffff #define TMU_ACCESS_EN BIT(20) -struct tb_cap_any { - union { - struct tb_cap_basic basic; - struct tb_cap_extended_short extended_short; - struct tb_cap_extended_long extended_long; - }; -} __packed; - static int tb_port_enable_tmu(struct tb_port *port, bool enable) { struct tb_switch *sw = port->sw; @@ -67,23 +59,50 @@ static void tb_port_dummy_read(struct tb_port *port) } } +/** + * tb_port_next_cap() - Return next capability in the linked list + * @port: Port to find the capability for + * @offset: Previous capability offset (%0 for start) + * + * Returns dword offset of the next capability in port config space + * capability list and returns it. Passing %0 returns the first entry in + * the capability list. If no next capability is found returns %0. In case + * of failure returns negative errno. + */ +int tb_port_next_cap(struct tb_port *port, unsigned int offset) +{ + struct tb_cap_any header; + int ret; + + if (!offset) + return port->config.first_cap_offset; + + ret = tb_port_read(port, &header, TB_CFG_PORT, offset, 1); + if (ret) + return ret; + + return header.basic.next; +} + static int __tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap) { - u32 offset = 1; + int offset = 0; do { struct tb_cap_any header; int ret; + offset = tb_port_next_cap(port, offset); + if (offset < 0) + return offset; + ret = tb_port_read(port, &header, TB_CFG_PORT, offset, 1); if (ret) return ret; if (header.basic.cap == cap) return offset; - - offset = header.basic.next; - } while (offset); + } while (offset > 0); return -ENOENT; } @@ -114,6 +133,50 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap) } /** + * tb_switch_next_cap() - Return next capability in the linked list + * @sw: Switch to find the capability for + * @offset: Previous capability offset (%0 for start) + * + * Finds dword offset of the next capability in router config space + * capability list and returns it. Passing %0 returns the first entry in + * the capability list. If no next capability is found returns %0. In case + * of failure returns negative errno. + */ +int tb_switch_next_cap(struct tb_switch *sw, unsigned int offset) +{ + struct tb_cap_any header; + int ret; + + if (!offset) + return sw->config.first_cap_offset; + + ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 2); + if (ret) + return ret; + + switch (header.basic.cap) { + case TB_SWITCH_CAP_TMU: + ret = header.basic.next; + break; + + case TB_SWITCH_CAP_VSE: + if (!header.extended_short.length) + ret = header.extended_long.next; + else + ret = header.extended_short.next; + break; + + default: + tb_sw_dbg(sw, "unknown capability %#x at %#x\n", + header.basic.cap, offset); + ret = -EINVAL; + break; + } + + return ret >= VSE_CAP_OFFSET_MAX ? 0 : ret; +} + +/** * tb_switch_find_cap() - Find switch capability * @sw Switch to find the capability for * @cap: Capability to look @@ -124,21 +187,23 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap) */ int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap) { - int offset = sw->config.first_cap_offset; + int offset = 0; - while (offset > 0 && offset < CAP_OFFSET_MAX) { + do { struct tb_cap_any header; int ret; + offset = tb_switch_next_cap(sw, offset); + if (offset < 0) + return offset; + ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 1); if (ret) return ret; if (header.basic.cap == cap) return offset; - - offset = header.basic.next; - } + } while (offset); return -ENOENT; } @@ -155,37 +220,24 @@ int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap) */ int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec) { - struct tb_cap_any header; - int offset; + int offset = 0; - offset = tb_switch_find_cap(sw, TB_SWITCH_CAP_VSE); - if (offset < 0) - return offset; - - while (offset > 0 && offset < VSE_CAP_OFFSET_MAX) { + do { + struct tb_cap_any header; int ret; - ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 2); + offset = tb_switch_next_cap(sw, offset); + if (offset < 0) + return offset; + + ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 1); if (ret) return ret; - /* - * Extended vendor specific capabilities come in two - * flavors: short and long. The latter is used when - * offset is over 0xff. - */ - if (offset >= CAP_OFFSET_MAX) { - if (header.extended_long.vsec_id == vsec) - return offset; - offset = header.extended_long.next; - } else { - if (header.extended_short.vsec_id == vsec) - return offset; - if (!header.extended_short.length) - return -ENOENT; - offset = header.extended_short.next; - } - } + if (header.extended_short.cap == TB_SWITCH_CAP_VSE && + header.extended_short.vsec_id == vsec) + return offset; + } while (offset); return -ENOENT; } diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index 394a23ce6ca4..9894b8f63064 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -219,6 +219,7 @@ static int check_config_address(struct tb_cfg_address addr, static struct tb_cfg_result decode_error(const struct ctl_pkg *response) { struct cfg_error_pkg *pkg = response->buffer; + struct tb_ctl *ctl = response->ctl; struct tb_cfg_result res = { 0 }; res.response_route = tb_cfg_get_route(&pkg->header); res.response_port = 0; @@ -227,9 +228,13 @@ static struct tb_cfg_result decode_error(const struct ctl_pkg *response) if (res.err) return res; - WARN(pkg->zero1, "pkg->zero1 is %#x\n", pkg->zero1); - WARN(pkg->zero2, "pkg->zero1 is %#x\n", pkg->zero1); - WARN(pkg->zero3, "pkg->zero1 is %#x\n", pkg->zero1); + if (pkg->zero1) + tb_ctl_warn(ctl, "pkg->zero1 is %#x\n", pkg->zero1); + if (pkg->zero2) + tb_ctl_warn(ctl, "pkg->zero2 is %#x\n", pkg->zero2); + if (pkg->zero3) + tb_ctl_warn(ctl, "pkg->zero3 is %#x\n", pkg->zero3); + res.err = 1; res.tb_error = pkg->error; res.response_port = pkg->port; @@ -266,9 +271,8 @@ static void tb_cfg_print_error(struct tb_ctl *ctl, * Invalid cfg_space/offset/length combination in * cfg_read/cfg_write. */ - tb_ctl_WARN(ctl, - "CFG_ERROR(%llx:%x): Invalid config space or offset\n", - res->response_route, res->response_port); + tb_ctl_dbg(ctl, "%llx:%x: invalid config space or offset\n", + res->response_route, res->response_port); return; case TB_CFG_ERROR_NO_SUCH_PORT: /* @@ -283,6 +287,10 @@ static void tb_cfg_print_error(struct tb_ctl *ctl, tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Route contains a loop\n", res->response_route, res->response_port); return; + case TB_CFG_ERROR_LOCK: + tb_ctl_warn(ctl, "%llx:%x: downstream port is locked\n", + res->response_route, res->response_port); + return; default: /* 5,6,7,9 and 11 are also valid error codes */ tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Unknown error\n", @@ -951,6 +959,9 @@ static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space, return -ENODEV; tb_cfg_print_error(ctl, res); + + if (res->tb_error == TB_CFG_ERROR_LOCK) + return -EACCES; return -EIO; } diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c new file mode 100644 index 000000000000..3680b2784ea1 --- /dev/null +++ b/drivers/thunderbolt/debugfs.c @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Debugfs interface + * + * Copyright (C) 2020, Intel Corporation + * Authors: Gil Fine <gil.fine@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + */ + +#include <linux/debugfs.h> +#include <linux/pm_runtime.h> + +#include "tb.h" + +#define PORT_CAP_PCIE_LEN 1 +#define PORT_CAP_POWER_LEN 2 +#define PORT_CAP_LANE_LEN 3 +#define PORT_CAP_USB3_LEN 5 +#define PORT_CAP_DP_LEN 8 +#define PORT_CAP_TMU_LEN 8 +#define PORT_CAP_BASIC_LEN 9 +#define PORT_CAP_USB4_LEN 20 + +#define SWITCH_CAP_TMU_LEN 26 +#define SWITCH_CAP_BASIC_LEN 27 + +#define PATH_LEN 2 + +#define COUNTER_SET_LEN 3 + +#define DEBUGFS_ATTR(__space, __write) \ +static int __space ## _open(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, __space ## _show, inode->i_private); \ +} \ + \ +static const struct file_operations __space ## _fops = { \ + .owner = THIS_MODULE, \ + .open = __space ## _open, \ + .release = single_release, \ + .read = seq_read, \ + .write = __write, \ + .llseek = seq_lseek, \ +} + +#define DEBUGFS_ATTR_RO(__space) \ + DEBUGFS_ATTR(__space, NULL) + +#define DEBUGFS_ATTR_RW(__space) \ + DEBUGFS_ATTR(__space, __space ## _write) + +static struct dentry *tb_debugfs_root; + +static void *validate_and_copy_from_user(const void __user *user_buf, + size_t *count) +{ + size_t nbytes; + void *buf; + + if (!*count) + return ERR_PTR(-EINVAL); + + if (!access_ok(user_buf, *count)) + return ERR_PTR(-EFAULT); + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + nbytes = min_t(size_t, *count, PAGE_SIZE); + if (copy_from_user(buf, user_buf, nbytes)) { + free_page((unsigned long)buf); + return ERR_PTR(-EFAULT); + } + + *count = nbytes; + return buf; +} + +static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len, + int long_fmt_len) +{ + char *token; + u32 v[5]; + int ret; + + token = strsep(line, "\n"); + if (!token) + return false; + + /* + * For Adapter/Router configuration space: + * Short format is: offset value\n + * v[0] v[1] + * Long format as produced from the read side: + * offset relative_offset cap_id vs_cap_id value\n + * v[0] v[1] v[2] v[3] v[4] + * + * For Counter configuration space: + * Short format is: offset\n + * v[0] + * Long format as produced from the read side: + * offset relative_offset counter_id value\n + * v[0] v[1] v[2] v[3] + */ + ret = sscanf(token, "%i %i %i %i %i", &v[0], &v[1], &v[2], &v[3], &v[4]); + /* In case of Counters, clear counter, "val" content is NA */ + if (ret == short_fmt_len) { + *offs = v[0]; + *val = v[short_fmt_len - 1]; + return true; + } else if (ret == long_fmt_len) { + *offs = v[0]; + *val = v[long_fmt_len - 1]; + return true; + } + + return false; +} + +#if IS_ENABLED(CONFIG_USB4_DEBUGFS_WRITE) +static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + struct tb *tb = sw->tb; + char *line, *buf; + u32 val, offset; + int ret = 0; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out; + } + + /* User did hardware changes behind the driver's back */ + add_taint(TAINT_USER, LOCKDEP_STILL_OK); + + line = buf; + while (parse_line(&line, &offset, &val, 2, 5)) { + if (port) + ret = tb_port_write(port, &val, TB_CFG_PORT, offset, 1); + else + ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1); + if (ret) + break; + } + + mutex_unlock(&tb->lock); + +out: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + free_page((unsigned long)buf); + + return ret < 0 ? ret : count; +} + +static ssize_t port_regs_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + + return regs_write(port->sw, port, user_buf, count, ppos); +} + +static ssize_t switch_regs_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_switch *sw = s->private; + + return regs_write(sw, NULL, user_buf, count, ppos); +} +#define DEBUGFS_MODE 0600 +#else +#define port_regs_write NULL +#define switch_regs_write NULL +#define DEBUGFS_MODE 0400 +#endif + +static int port_clear_all_counters(struct tb_port *port) +{ + u32 *buf; + int ret; + + buf = kcalloc(COUNTER_SET_LEN * port->config.max_counters, sizeof(u32), + GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = tb_port_write(port, buf, TB_CFG_COUNTERS, 0, + COUNTER_SET_LEN * port->config.max_counters); + kfree(buf); + + return ret; +} + +static ssize_t counters_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct tb_port *port = s->private; + struct tb_switch *sw = port->sw; + struct tb *tb = port->sw->tb; + char *buf; + int ret; + + buf = validate_and_copy_from_user(user_buf, &count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out; + } + + /* If written delimiter only, clear all counters in one shot */ + if (buf[0] == '\n') { + ret = port_clear_all_counters(port); + } else { + char *line = buf; + u32 val, offset; + + ret = -EINVAL; + while (parse_line(&line, &offset, &val, 1, 4)) { + ret = tb_port_write(port, &val, TB_CFG_COUNTERS, + offset, 1); + if (ret) + break; + } + } + + mutex_unlock(&tb->lock); + +out: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + free_page((unsigned long)buf); + + return ret < 0 ? ret : count; +} + +static void cap_show(struct seq_file *s, struct tb_switch *sw, + struct tb_port *port, unsigned int cap, u8 cap_id, + u8 vsec_id, int length) +{ + int ret, offset = 0; + + while (length > 0) { + int i, dwords = min(length, TB_MAX_CONFIG_RW_LENGTH); + u32 data[TB_MAX_CONFIG_RW_LENGTH]; + + if (port) + ret = tb_port_read(port, data, TB_CFG_PORT, cap + offset, + dwords); + else + ret = tb_sw_read(sw, data, TB_CFG_SWITCH, cap + offset, dwords); + if (ret) { + seq_printf(s, "0x%04x <not accessible>\n", + cap + offset); + if (dwords > 1) + seq_printf(s, "0x%04x ...\n", cap + offset + 1); + return; + } + + for (i = 0; i < dwords; i++) { + seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n", + cap + offset + i, offset + i, + cap_id, vsec_id, data[i]); + } + + length -= dwords; + offset += dwords; + } +} + +static void port_cap_show(struct tb_port *port, struct seq_file *s, + unsigned int cap) +{ + struct tb_cap_any header; + u8 vsec_id = 0; + size_t length; + int ret; + + ret = tb_port_read(port, &header, TB_CFG_PORT, cap, 1); + if (ret) { + seq_printf(s, "0x%04x <capability read failed>\n", cap); + return; + } + + switch (header.basic.cap) { + case TB_PORT_CAP_PHY: + length = PORT_CAP_LANE_LEN; + break; + + case TB_PORT_CAP_TIME1: + length = PORT_CAP_TMU_LEN; + break; + + case TB_PORT_CAP_POWER: + length = PORT_CAP_POWER_LEN; + break; + + case TB_PORT_CAP_ADAP: + if (tb_port_is_pcie_down(port) || tb_port_is_pcie_up(port)) { + length = PORT_CAP_PCIE_LEN; + } else if (tb_port_is_dpin(port) || tb_port_is_dpout(port)) { + length = PORT_CAP_DP_LEN; + } else if (tb_port_is_usb3_down(port) || + tb_port_is_usb3_up(port)) { + length = PORT_CAP_USB3_LEN; + } else { + seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n", + cap, header.basic.cap); + return; + } + break; + + case TB_PORT_CAP_VSE: + if (!header.extended_short.length) { + ret = tb_port_read(port, (u32 *)&header + 1, TB_CFG_PORT, + cap + 1, 1); + if (ret) { + seq_printf(s, "0x%04x <capability read failed>\n", + cap + 1); + return; + } + length = header.extended_long.length; + vsec_id = header.extended_short.vsec_id; + } else { + length = header.extended_short.length; + vsec_id = header.extended_short.vsec_id; + /* + * Ice Lake and Tiger Lake do not implement the + * full length of the capability, only first 32 + * dwords so hard-code it here. + */ + if (!vsec_id && + (tb_switch_is_ice_lake(port->sw) || + tb_switch_is_tiger_lake(port->sw))) + length = 32; + } + break; + + case TB_PORT_CAP_USB4: + length = PORT_CAP_USB4_LEN; + break; + + default: + seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n", + cap, header.basic.cap); + return; + } + + cap_show(s, NULL, port, cap, header.basic.cap, vsec_id, length); +} + +static void port_caps_show(struct tb_port *port, struct seq_file *s) +{ + int cap; + + cap = tb_port_next_cap(port, 0); + while (cap > 0) { + port_cap_show(port, s, cap); + cap = tb_port_next_cap(port, cap); + } +} + +static int port_basic_regs_show(struct tb_port *port, struct seq_file *s) +{ + u32 data[PORT_CAP_BASIC_LEN]; + int ret, i; + + ret = tb_port_read(port, data, TB_CFG_PORT, 0, ARRAY_SIZE(data)); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(data); i++) + seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]); + + return 0; +} + +static int port_regs_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct tb_switch *sw = port->sw; + struct tb *tb = sw->tb; + int ret; + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_rpm_put; + } + + seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n"); + + ret = port_basic_regs_show(port, s); + if (ret) + goto out_unlock; + + port_caps_show(port, s); + +out_unlock: + mutex_unlock(&tb->lock); +out_rpm_put: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + + return ret; +} +DEBUGFS_ATTR_RW(port_regs); + +static void switch_cap_show(struct tb_switch *sw, struct seq_file *s, + unsigned int cap) +{ + struct tb_cap_any header; + int ret, length; + u8 vsec_id = 0; + + ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, cap, 1); + if (ret) { + seq_printf(s, "0x%04x <capability read failed>\n", cap); + return; + } + + if (header.basic.cap == TB_SWITCH_CAP_VSE) { + if (!header.extended_short.length) { + ret = tb_sw_read(sw, (u32 *)&header + 1, TB_CFG_SWITCH, + cap + 1, 1); + if (ret) { + seq_printf(s, "0x%04x <capability read failed>\n", + cap + 1); + return; + } + length = header.extended_long.length; + } else { + length = header.extended_short.length; + } + vsec_id = header.extended_short.vsec_id; + } else { + if (header.basic.cap == TB_SWITCH_CAP_TMU) { + length = SWITCH_CAP_TMU_LEN; + } else { + seq_printf(s, "0x%04x <unknown capability 0x%02x>\n", + cap, header.basic.cap); + return; + } + } + + cap_show(s, sw, NULL, cap, header.basic.cap, vsec_id, length); +} + +static void switch_caps_show(struct tb_switch *sw, struct seq_file *s) +{ + int cap; + + cap = tb_switch_next_cap(sw, 0); + while (cap > 0) { + switch_cap_show(sw, s, cap); + cap = tb_switch_next_cap(sw, cap); + } +} + +static int switch_basic_regs_show(struct tb_switch *sw, struct seq_file *s) +{ + u32 data[SWITCH_CAP_BASIC_LEN]; + size_t dwords; + int ret, i; + + /* Only USB4 has the additional registers */ + if (tb_switch_is_usb4(sw)) + dwords = ARRAY_SIZE(data); + else + dwords = 7; + + ret = tb_sw_read(sw, data, TB_CFG_SWITCH, 0, dwords); + if (ret) + return ret; + + for (i = 0; i < dwords; i++) + seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]); + + return 0; +} + +static int switch_regs_show(struct seq_file *s, void *not_used) +{ + struct tb_switch *sw = s->private; + struct tb *tb = sw->tb; + int ret; + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_rpm_put; + } + + seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n"); + + ret = switch_basic_regs_show(sw, s); + if (ret) + goto out_unlock; + + switch_caps_show(sw, s); + +out_unlock: + mutex_unlock(&tb->lock); +out_rpm_put: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + + return ret; +} +DEBUGFS_ATTR_RW(switch_regs); + +static int path_show_one(struct tb_port *port, struct seq_file *s, int hopid) +{ + u32 data[PATH_LEN]; + int ret, i; + + ret = tb_port_read(port, data, TB_CFG_HOPS, hopid * PATH_LEN, + ARRAY_SIZE(data)); + if (ret) { + seq_printf(s, "0x%04x <not accessible>\n", hopid * PATH_LEN); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data); i++) { + seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n", + hopid * PATH_LEN + i, i, hopid, data[i]); + } + + return 0; +} + +static int path_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct tb_switch *sw = port->sw; + struct tb *tb = sw->tb; + int start, i, ret = 0; + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out_rpm_put; + } + + seq_puts(s, "# offset relative_offset in_hop_id value\n"); + + /* NHI and lane adapters have entry for path 0 */ + if (tb_port_is_null(port) || tb_port_is_nhi(port)) { + ret = path_show_one(port, s, 0); + if (ret) + goto out_unlock; + } + + start = tb_port_is_nhi(port) ? 1 : TB_PATH_MIN_HOPID; + + for (i = start; i <= port->config.max_in_hop_id; i++) { + ret = path_show_one(port, s, i); + if (ret) + break; + } + +out_unlock: + mutex_unlock(&tb->lock); +out_rpm_put: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + + return ret; +} +DEBUGFS_ATTR_RO(path); + +static int counter_set_regs_show(struct tb_port *port, struct seq_file *s, + int counter) +{ + u32 data[COUNTER_SET_LEN]; + int ret, i; + + ret = tb_port_read(port, data, TB_CFG_COUNTERS, + counter * COUNTER_SET_LEN, ARRAY_SIZE(data)); + if (ret) { + seq_printf(s, "0x%04x <not accessible>\n", + counter * COUNTER_SET_LEN); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data); i++) { + seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n", + counter * COUNTER_SET_LEN + i, i, counter, data[i]); + } + + return 0; +} + +static int counters_show(struct seq_file *s, void *not_used) +{ + struct tb_port *port = s->private; + struct tb_switch *sw = port->sw; + struct tb *tb = sw->tb; + int i, ret = 0; + + pm_runtime_get_sync(&sw->dev); + + if (mutex_lock_interruptible(&tb->lock)) { + ret = -ERESTARTSYS; + goto out; + } + + seq_puts(s, "# offset relative_offset counter_id value\n"); + + for (i = 0; i < port->config.max_counters; i++) { + ret = counter_set_regs_show(port, s, i); + if (ret) + break; + } + + mutex_unlock(&tb->lock); + +out: + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + + return ret; +} +DEBUGFS_ATTR_RW(counters); + +/** + * tb_switch_debugfs_init() - Add debugfs entries for router + * @sw: Pointer to the router + * + * Adds debugfs directories and files for given router. + */ +void tb_switch_debugfs_init(struct tb_switch *sw) +{ + struct dentry *debugfs_dir; + struct tb_port *port; + + debugfs_dir = debugfs_create_dir(dev_name(&sw->dev), tb_debugfs_root); + sw->debugfs_dir = debugfs_dir; + debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, sw, + &switch_regs_fops); + + tb_switch_for_each_port(sw, port) { + struct dentry *debugfs_dir; + char dir_name[10]; + + if (port->disabled) + continue; + if (port->config.type == TB_TYPE_INACTIVE) + continue; + + snprintf(dir_name, sizeof(dir_name), "port%d", port->port); + debugfs_dir = debugfs_create_dir(dir_name, sw->debugfs_dir); + debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, + port, &port_regs_fops); + debugfs_create_file("path", 0400, debugfs_dir, port, + &path_fops); + if (port->config.counters_support) + debugfs_create_file("counters", 0600, debugfs_dir, port, + &counters_fops); + } +} + +/** + * tb_switch_debugfs_remove() - Remove all router debugfs entries + * @sw: Pointer to the router + * + * Removes all previously added debugfs entries under this router. + */ +void tb_switch_debugfs_remove(struct tb_switch *sw) +{ + debugfs_remove_recursive(sw->debugfs_dir); +} + +void tb_debugfs_init(void) +{ + tb_debugfs_root = debugfs_create_dir("thunderbolt", NULL); +} + +void tb_debugfs_exit(void) +{ + debugfs_remove_recursive(tb_debugfs_root); +} diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c index bba4cbfa9759..f0de94f7acbf 100644 --- a/drivers/thunderbolt/domain.c +++ b/drivers/thunderbolt/domain.c @@ -275,7 +275,7 @@ static struct attribute *domain_attrs[] = { static umode_t domain_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) { - struct device *dev = container_of(kobj, struct device, kobj); + struct device *dev = kobj_to_dev(kobj); struct tb *tb = container_of(dev, struct tb, dev); if (attr == &dev_attr_boot_acl.attr) { @@ -455,6 +455,8 @@ int tb_domain_add(struct tb *tb) /* This starts event processing */ mutex_unlock(&tb->lock); + device_init_wakeup(&tb->dev, true); + pm_runtime_no_callbacks(&tb->dev); pm_runtime_set_active(&tb->dev); pm_runtime_enable(&tb->dev); @@ -544,6 +546,33 @@ int tb_domain_suspend(struct tb *tb) return tb->cm_ops->suspend ? tb->cm_ops->suspend(tb) : 0; } +int tb_domain_freeze_noirq(struct tb *tb) +{ + int ret = 0; + + mutex_lock(&tb->lock); + if (tb->cm_ops->freeze_noirq) + ret = tb->cm_ops->freeze_noirq(tb); + if (!ret) + tb_ctl_stop(tb->ctl); + mutex_unlock(&tb->lock); + + return ret; +} + +int tb_domain_thaw_noirq(struct tb *tb) +{ + int ret = 0; + + mutex_lock(&tb->lock); + tb_ctl_start(tb->ctl); + if (tb->cm_ops->thaw_noirq) + ret = tb->cm_ops->thaw_noirq(tb); + mutex_unlock(&tb->lock); + + return ret; +} + void tb_domain_complete(struct tb *tb) { if (tb->cm_ops->complete) @@ -798,12 +827,23 @@ int tb_domain_init(void) { int ret; + tb_test_init(); + + tb_debugfs_init(); ret = tb_xdomain_init(); if (ret) - return ret; + goto err_debugfs; ret = bus_register(&tb_bus_type); if (ret) - tb_xdomain_exit(); + goto err_xdomain; + + return 0; + +err_xdomain: + tb_xdomain_exit(); +err_debugfs: + tb_debugfs_exit(); + tb_test_exit(); return ret; } @@ -814,4 +854,6 @@ void tb_domain_exit(void) ida_destroy(&tb_domain_ida); tb_nvm_exit(); tb_xdomain_exit(); + tb_debugfs_exit(); + tb_test_exit(); } diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c index ffcc8c3459e5..b51fc3f62b1f 100644 --- a/drivers/thunderbolt/icm.c +++ b/drivers/thunderbolt/icm.c @@ -1635,11 +1635,14 @@ static void icm_icl_rtd3_veto(struct tb *tb, const struct icm_pkg_header *hdr) static bool icm_tgl_is_supported(struct tb *tb) { + u32 val; + /* * If the firmware is not running use software CM. This platform * should fully support both. */ - return icm_firmware_running(tb->nhi); + val = ioread32(tb->nhi->iobase + REG_FW_STS); + return !!(val & REG_FW_STS_NVM_AUTH_DONE); } static void icm_handle_notification(struct work_struct *work) diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c index 19be627d090f..41e6c738f6c8 100644 --- a/drivers/thunderbolt/lc.c +++ b/drivers/thunderbolt/lc.c @@ -45,7 +45,7 @@ static int find_port_lc_cap(struct tb_port *port) return sw->cap_lc + start + phys * size; } -static int tb_lc_configure_lane(struct tb_port *port, bool configure) +static int tb_lc_set_port_configured(struct tb_port *port, bool configured) { bool upstream = tb_is_upstream_port(port); struct tb_switch *sw = port->sw; @@ -69,7 +69,7 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure) else lane = TB_LC_SX_CTRL_L2C; - if (configure) { + if (configured) { ctrl |= lane; if (upstream) ctrl |= TB_LC_SX_CTRL_UPSTREAM; @@ -83,55 +83,146 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure) } /** - * tb_lc_configure_link() - Let LC know about configured link - * @sw: Switch that is being added + * tb_lc_configure_port() - Let LC know about configured port + * @port: Port that is set as configured * - * Informs LC of both parent switch and @sw that there is established - * link between the two. + * Sets the port configured for power management purposes. */ -int tb_lc_configure_link(struct tb_switch *sw) +int tb_lc_configure_port(struct tb_port *port) { - struct tb_port *up, *down; - int ret; + return tb_lc_set_port_configured(port, true); +} + +/** + * tb_lc_unconfigure_port() - Let LC know about unconfigured port + * @port: Port that is set as configured + * + * Sets the port unconfigured for power management purposes. + */ +void tb_lc_unconfigure_port(struct tb_port *port) +{ + tb_lc_set_port_configured(port, false); +} - if (!tb_route(sw) || tb_switch_is_icm(sw)) +static int tb_lc_set_xdomain_configured(struct tb_port *port, bool configure) +{ + struct tb_switch *sw = port->sw; + u32 ctrl, lane; + int cap, ret; + + if (sw->generation < 2) return 0; - up = tb_upstream_port(sw); - down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent)); + cap = find_port_lc_cap(port); + if (cap < 0) + return cap; - /* Configure parent link toward this switch */ - ret = tb_lc_configure_lane(down, true); + ret = tb_sw_read(sw, &ctrl, TB_CFG_SWITCH, cap + TB_LC_SX_CTRL, 1); if (ret) return ret; - /* Configure upstream link from this switch to the parent */ - ret = tb_lc_configure_lane(up, true); + /* Resolve correct lane */ + if (port->port % 2) + lane = TB_LC_SX_CTRL_L1D; + else + lane = TB_LC_SX_CTRL_L2D; + + if (configure) + ctrl |= lane; + else + ctrl &= ~lane; + + return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, cap + TB_LC_SX_CTRL, 1); +} + +/** + * tb_lc_configure_xdomain() - Inform LC that the link is XDomain + * @port: Switch downstream port connected to another host + * + * Sets the lane configured for XDomain accordingly so that the LC knows + * about this. Returns %0 in success and negative errno in failure. + */ +int tb_lc_configure_xdomain(struct tb_port *port) +{ + return tb_lc_set_xdomain_configured(port, true); +} + +/** + * tb_lc_unconfigure_xdomain() - Unconfigure XDomain from port + * @port: Switch downstream port that was connected to another host + * + * Unsets the lane XDomain configuration. + */ +void tb_lc_unconfigure_xdomain(struct tb_port *port) +{ + tb_lc_set_xdomain_configured(port, false); +} + +static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset, + unsigned int flags) +{ + u32 ctrl; + int ret; + + /* + * Enable wake on PCIe and USB4 (wake coming from another + * router). + */ + ret = tb_sw_read(sw, &ctrl, TB_CFG_SWITCH, + offset + TB_LC_SX_CTRL, 1); if (ret) - tb_lc_configure_lane(down, false); + return ret; + + ctrl &= ~(TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD | TB_LC_SX_CTRL_WOP | + TB_LC_SX_CTRL_WOU4); + + if (flags & TB_WAKE_ON_CONNECT) + ctrl |= TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD; + if (flags & TB_WAKE_ON_USB4) + ctrl |= TB_LC_SX_CTRL_WOU4; + if (flags & TB_WAKE_ON_PCIE) + ctrl |= TB_LC_SX_CTRL_WOP; - return ret; + return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, offset + TB_LC_SX_CTRL, 1); } /** - * tb_lc_unconfigure_link() - Let LC know about unconfigured link - * @sw: Switch to unconfigure + * tb_lc_set_wake() - Enable/disable wake + * @sw: Switch whose wakes to configure + * @flags: Wakeup flags (%0 to disable) * - * Informs LC of both parent switch and @sw that the link between the - * two does not exist anymore. + * For each LC sets wake bits accordingly. */ -void tb_lc_unconfigure_link(struct tb_switch *sw) +int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags) { - struct tb_port *up, *down; + int start, size, nlc, ret, i; + u32 desc; - if (sw->is_unplugged || !tb_route(sw) || tb_switch_is_icm(sw)) - return; + if (sw->generation < 2) + return 0; - up = tb_upstream_port(sw); - down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent)); + if (!tb_route(sw)) + return 0; - tb_lc_configure_lane(up, false); - tb_lc_configure_lane(down, false); + ret = read_lc_desc(sw, &desc); + if (ret) + return ret; + + /* Figure out number of link controllers */ + nlc = desc & TB_LC_DESC_NLC_MASK; + start = (desc & TB_LC_DESC_SIZE_MASK) >> TB_LC_DESC_SIZE_SHIFT; + size = (desc & TB_LC_DESC_PORT_SIZE_MASK) >> TB_LC_DESC_PORT_SIZE_SHIFT; + + /* For each link controller set sleep bit */ + for (i = 0; i < nlc; i++) { + unsigned int offset = sw->cap_lc + start + i * size; + + ret = tb_lc_set_wake_one(sw, offset, flags); + if (ret) + return ret; + } + + return 0; } /** diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 5f7489fa1327..3f79baa54829 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/property.h> +#include <linux/platform_data/x86/apple.h> #include "nhi.h" #include "nhi_regs.h" @@ -863,6 +864,22 @@ static int nhi_suspend_noirq(struct device *dev) return __nhi_suspend_noirq(dev, device_may_wakeup(dev)); } +static int nhi_freeze_noirq(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct tb *tb = pci_get_drvdata(pdev); + + return tb_domain_freeze_noirq(tb); +} + +static int nhi_thaw_noirq(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct tb *tb = pci_get_drvdata(pdev); + + return tb_domain_thaw_noirq(tb); +} + static bool nhi_wake_supported(struct pci_dev *pdev) { u8 val; @@ -1069,6 +1086,69 @@ static bool nhi_imr_valid(struct pci_dev *pdev) return true; } +/* + * During suspend the Thunderbolt controller is reset and all PCIe + * tunnels are lost. The NHI driver will try to reestablish all tunnels + * during resume. This adds device links between the tunneled PCIe + * downstream ports and the NHI so that the device core will make sure + * NHI is resumed first before the rest. + */ +static void tb_apple_add_links(struct tb_nhi *nhi) +{ + struct pci_dev *upstream, *pdev; + + if (!x86_apple_machine) + return; + + switch (nhi->pdev->device) { + case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE: + case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C: + case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI: + case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI: + break; + default: + return; + } + + upstream = pci_upstream_bridge(nhi->pdev); + while (upstream) { + if (!pci_is_pcie(upstream)) + return; + if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM) + break; + upstream = pci_upstream_bridge(upstream); + } + + if (!upstream) + return; + + /* + * For each hotplug downstream port, create add device link + * back to NHI so that PCIe tunnels can be re-established after + * sleep. + */ + for_each_pci_bridge(pdev, upstream->subordinate) { + const struct device_link *link; + + if (!pci_is_pcie(pdev)) + continue; + if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM || + !pdev->is_hotplug_bridge) + continue; + + link = device_link_add(&pdev->dev, &nhi->pdev->dev, + DL_FLAG_AUTOREMOVE_SUPPLIER | + DL_FLAG_PM_RUNTIME); + if (link) { + dev_dbg(&nhi->pdev->dev, "created link from %s\n", + dev_name(&pdev->dev)); + } else { + dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n", + dev_name(&pdev->dev)); + } + } +} + static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tb_nhi *nhi; @@ -1134,6 +1214,9 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) return res; } + tb_apple_add_links(nhi); + tb_acpi_add_links(nhi); + tb = icm_probe(nhi); if (!tb) tb = tb_probe(nhi); @@ -1157,6 +1240,8 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) } pci_set_drvdata(pdev, tb); + device_wakeup_enable(&pdev->dev); + pm_runtime_allow(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, TB_AUTOSUSPEND_DELAY); pm_runtime_use_autosuspend(&pdev->dev); @@ -1186,14 +1271,13 @@ static void nhi_remove(struct pci_dev *pdev) static const struct dev_pm_ops nhi_pm_ops = { .suspend_noirq = nhi_suspend_noirq, .resume_noirq = nhi_resume_noirq, - .freeze_noirq = nhi_suspend_noirq, /* + .freeze_noirq = nhi_freeze_noirq, /* * we just disable hotplug, the * pci-tunnels stay alive. */ - .thaw_noirq = nhi_resume_noirq, + .thaw_noirq = nhi_thaw_noirq, .restore_noirq = nhi_resume_noirq, .suspend = nhi_suspend, - .freeze = nhi_suspend, .poweroff_noirq = nhi_poweroff_noirq, .poweroff = nhi_suspend, .complete = nhi_complete, diff --git a/drivers/thunderbolt/nhi_ops.c b/drivers/thunderbolt/nhi_ops.c index 6795851aac95..96da07e88c52 100644 --- a/drivers/thunderbolt/nhi_ops.c +++ b/drivers/thunderbolt/nhi_ops.c @@ -59,7 +59,7 @@ static int icl_nhi_force_power(struct tb_nhi *nhi, bool power) pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap); if (power) { - unsigned int retries = 10; + unsigned int retries = 350; u32 val; /* Wait until the firmware tells it is up and running */ @@ -67,7 +67,7 @@ static int icl_nhi_force_power(struct tb_nhi *nhi, bool power) pci_read_config_dword(nhi->pdev, VS_CAP_9, &val); if (val & VS_CAP_9_FW_READY) return 0; - msleep(250); + usleep_range(3000, 3100); } while (--retries); return -ETIMEDOUT; @@ -97,7 +97,7 @@ static int icl_nhi_lc_mailbox_cmd_complete(struct tb_nhi *nhi, int timeout) pci_read_config_dword(nhi->pdev, VS_CAP_18, &data); if (data & VS_CAP_18_DONE) goto clear; - msleep(100); + usleep_range(1000, 1100); } while (time_before(jiffies, end)); return -ETIMEDOUT; @@ -121,31 +121,38 @@ static void icl_nhi_set_ltr(struct tb_nhi *nhi) static int icl_nhi_suspend(struct tb_nhi *nhi) { + struct tb *tb = pci_get_drvdata(nhi->pdev); int ret; if (icl_nhi_is_device_connected(nhi)) return 0; - /* - * If there is no device connected we need to perform both: a - * handshake through LC mailbox and force power down before - * entering D3. - */ - icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET); - ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT); - if (ret) - return ret; + if (tb_switch_is_icm(tb->root_switch)) { + /* + * If there is no device connected we need to perform + * both: a handshake through LC mailbox and force power + * down before entering D3. + */ + icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET); + ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT); + if (ret) + return ret; + } return icl_nhi_force_power(nhi, false); } static int icl_nhi_suspend_noirq(struct tb_nhi *nhi, bool wakeup) { + struct tb *tb = pci_get_drvdata(nhi->pdev); enum icl_lc_mailbox_cmd cmd; if (!pm_suspend_via_firmware()) return icl_nhi_suspend(nhi); + if (!tb_switch_is_icm(tb->root_switch)) + return 0; + cmd = wakeup ? ICL_LC_GO2SX : ICL_LC_GO2SX_NO_WAKE; icl_nhi_lc_mailbox_cmd(nhi, cmd); return icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT); diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c index 7eac3e0f90a2..57e2978a3c21 100644 --- a/drivers/thunderbolt/quirks.c +++ b/drivers/thunderbolt/quirks.c @@ -27,7 +27,7 @@ static const struct tb_quirk tb_quirks[] = { * tb_check_quirks() - Check for quirks to apply * @sw: Thunderbolt switch * - * Apply any quirks for the Thunderbolt controller + * Apply any quirks for the Thunderbolt controller. */ void tb_check_quirks(struct tb_switch *sw) { diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index a921de9ce7cb..c73bbfe69ba1 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -601,6 +601,13 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits) if (credits == 0 || port->sw->is_unplugged) return 0; + /* + * USB4 restricts programming NFC buffers to lane adapters only + * so skip other ports. + */ + if (tb_switch_is_usb4(port->sw) && !tb_port_is_null(port)) + return 0; + nfc_credits = port->config.nfc_credits & ADP_CS_4_NFC_BUFFERS_MASK; nfc_credits += credits; @@ -666,6 +673,50 @@ int tb_port_unlock(struct tb_port *port) return 0; } +static int __tb_port_enable(struct tb_port *port, bool enable) +{ + int ret; + u32 phy; + + if (!tb_port_is_null(port)) + return -EINVAL; + + ret = tb_port_read(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); + if (ret) + return ret; + + if (enable) + phy &= ~LANE_ADP_CS_1_LD; + else + phy |= LANE_ADP_CS_1_LD; + + return tb_port_write(port, &phy, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); +} + +/** + * tb_port_enable() - Enable lane adapter + * @port: Port to enable (can be %NULL) + * + * This is used for lane 0 and 1 adapters to enable it. + */ +int tb_port_enable(struct tb_port *port) +{ + return __tb_port_enable(port, true); +} + +/** + * tb_port_disable() - Disable lane adapter + * @port: Port to disable (can be %NULL) + * + * This is used for lane 0 and 1 adapters to disable it. + */ +int tb_port_disable(struct tb_port *port) +{ + return __tb_port_enable(port, false); +} + /** * tb_init_port() - initialize a port * @@ -739,7 +790,7 @@ static int tb_port_alloc_hopid(struct tb_port *port, bool in, int min_hopid, * NHI can use HopIDs 1-max for other adapters HopIDs 0-7 are * reserved. */ - if (port->config.type != TB_TYPE_NHI && min_hopid < TB_PATH_MIN_HOPID) + if (!tb_port_is_nhi(port) && min_hopid < TB_PATH_MIN_HOPID) min_hopid = TB_PATH_MIN_HOPID; if (max_hopid < 0 || max_hopid > port_max_hopid) @@ -1227,23 +1278,24 @@ static void tb_dump_switch(const struct tb *tb, const struct tb_switch *sw) /** * reset_switch() - reconfigure route, enable and send TB_CFG_PKG_RESET + * @sw: Switch to reset * * Return: Returns 0 on success or an error code on failure. */ -int tb_switch_reset(struct tb *tb, u64 route) +int tb_switch_reset(struct tb_switch *sw) { struct tb_cfg_result res; - struct tb_regs_switch_header header = { - header.route_hi = route >> 32, - header.route_lo = route, - header.enabled = true, - }; - tb_dbg(tb, "resetting switch at %llx\n", route); - res.err = tb_cfg_write(tb->ctl, ((u32 *) &header) + 2, route, - 0, 2, 2, 2); + + if (sw->generation > 1) + return 0; + + tb_sw_dbg(sw, "resetting switch\n"); + + res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2, + TB_CFG_SWITCH, 2, 2); if (res.err) return res.err; - res = tb_cfg_reset(tb->ctl, route, TB_CFG_DEFAULT_TIMEOUT); + res = tb_cfg_reset(sw->tb->ctl, tb_route(sw), TB_CFG_DEFAULT_TIMEOUT); if (res.err > 0) return -EIO; return res.err; @@ -1261,7 +1313,7 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active) u32 data; int res; - if (tb_switch_is_icm(sw)) + if (tb_switch_is_icm(sw) || tb_switch_is_usb4(sw)) return 0; sw->config.plug_events_delay = 0xff; @@ -1269,10 +1321,6 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active) if (res) return res; - /* Plug events are always enabled in USB4 */ - if (tb_switch_is_usb4(sw)) - return 0; - res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1); if (res) return res; @@ -1649,7 +1697,7 @@ static struct attribute *switch_attrs[] = { static umode_t switch_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) { - struct device *dev = container_of(kobj, struct device, kobj); + struct device *dev = kobj_to_dev(kobj); struct tb_switch *sw = tb_to_switch(dev); if (attr == &dev_attr_device.attr) { @@ -1988,7 +2036,7 @@ int tb_switch_configure(struct tb_switch *sw) route = tb_route(sw); tb_dbg(tb, "%s Switch at %#llx (depth: %d, up port: %d)\n", - sw->config.enabled ? "restoring " : "initializing", route, + sw->config.enabled ? "restoring" : "initializing", route, tb_route_length(route), sw->config.upstream_port_number); sw->config.enabled = 1; @@ -2008,10 +2056,6 @@ int tb_switch_configure(struct tb_switch *sw) return ret; ret = usb4_switch_setup(sw); - if (ret) - return ret; - - ret = usb4_switch_configure_link(sw); } else { if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL) tb_sw_warn(sw, "unknown switch vendor id %#x\n", @@ -2025,10 +2069,6 @@ int tb_switch_configure(struct tb_switch *sw) /* Enumerate the switch */ ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH, ROUTER_CS_1, 3); - if (ret) - return ret; - - ret = tb_lc_configure_link(sw); } if (ret) return ret; @@ -2312,6 +2352,69 @@ void tb_switch_lane_bonding_disable(struct tb_switch *sw) } /** + * tb_switch_configure_link() - Set link configured + * @sw: Switch whose link is configured + * + * Sets the link upstream from @sw configured (from both ends) so that + * it will not be disconnected when the domain exits sleep. Can be + * called for any switch. + * + * It is recommended that this is called after lane bonding is enabled. + * + * Returns %0 on success and negative errno in case of error. + */ +int tb_switch_configure_link(struct tb_switch *sw) +{ + struct tb_port *up, *down; + int ret; + + if (!tb_route(sw) || tb_switch_is_icm(sw)) + return 0; + + up = tb_upstream_port(sw); + if (tb_switch_is_usb4(up->sw)) + ret = usb4_port_configure(up); + else + ret = tb_lc_configure_port(up); + if (ret) + return ret; + + down = up->remote; + if (tb_switch_is_usb4(down->sw)) + return usb4_port_configure(down); + return tb_lc_configure_port(down); +} + +/** + * tb_switch_unconfigure_link() - Unconfigure link + * @sw: Switch whose link is unconfigured + * + * Sets the link unconfigured so the @sw will be disconnected if the + * domain exists sleep. + */ +void tb_switch_unconfigure_link(struct tb_switch *sw) +{ + struct tb_port *up, *down; + + if (sw->is_unplugged) + return; + if (!tb_route(sw) || tb_switch_is_icm(sw)) + return; + + up = tb_upstream_port(sw); + if (tb_switch_is_usb4(up->sw)) + usb4_port_unconfigure(up); + else + tb_lc_unconfigure_port(up); + + down = up->remote; + if (tb_switch_is_usb4(down->sw)) + usb4_port_unconfigure(down); + else + tb_lc_unconfigure_port(down); +} + +/** * tb_switch_add() - Add a switch to the domain * @sw: Switch to add * @@ -2399,6 +2502,13 @@ int tb_switch_add(struct tb_switch *sw) return ret; } + /* + * Thunderbolt routers do not generate wakeups themselves but + * they forward wakeups from tunneled protocols, so enable it + * here. + */ + device_init_wakeup(&sw->dev, true); + pm_runtime_set_active(&sw->dev); if (sw->rpm) { pm_runtime_set_autosuspend_delay(&sw->dev, TB_AUTOSUSPEND_DELAY); @@ -2408,6 +2518,7 @@ int tb_switch_add(struct tb_switch *sw) pm_request_autosuspend(&sw->dev); } + tb_switch_debugfs_init(sw); return 0; } @@ -2423,6 +2534,8 @@ void tb_switch_remove(struct tb_switch *sw) { struct tb_port *port; + tb_switch_debugfs_remove(sw); + if (sw->rpm) { pm_runtime_get_sync(&sw->dev); pm_runtime_disable(&sw->dev); @@ -2445,11 +2558,6 @@ void tb_switch_remove(struct tb_switch *sw) if (!sw->is_unplugged) tb_plug_events_active(sw, false); - if (tb_switch_is_usb4(sw)) - usb4_switch_unconfigure_link(sw); - else - tb_lc_unconfigure_link(sw); - tb_switch_nvm_remove(sw); if (tb_route(sw)) @@ -2481,6 +2589,18 @@ void tb_sw_set_unplugged(struct tb_switch *sw) } } +static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags) +{ + if (flags) + tb_sw_dbg(sw, "enabling wakeup: %#x\n", flags); + else + tb_sw_dbg(sw, "disabling wakeup\n"); + + if (tb_switch_is_usb4(sw)) + return usb4_switch_set_wake(sw, flags); + return tb_lc_set_wake(sw, flags); +} + int tb_switch_resume(struct tb_switch *sw) { struct tb_port *port; @@ -2526,6 +2646,13 @@ int tb_switch_resume(struct tb_switch *sw) if (err) return err; + /* Disable wakes */ + tb_switch_set_wake(sw, 0); + + err = tb_switch_tmu_init(sw); + if (err) + return err; + /* check for surviving downstream switches */ tb_switch_for_each_port(sw, port) { if (!tb_port_has_remote(port) && !port->xdomain) @@ -2555,20 +2682,43 @@ int tb_switch_resume(struct tb_switch *sw) return 0; } -void tb_switch_suspend(struct tb_switch *sw) +/** + * tb_switch_suspend() - Put a switch to sleep + * @sw: Switch to suspend + * @runtime: Is this runtime suspend or system sleep + * + * Suspends router and all its children. Enables wakes according to + * value of @runtime and then sets sleep bit for the router. If @sw is + * host router the domain is ready to go to sleep once this function + * returns. + */ +void tb_switch_suspend(struct tb_switch *sw, bool runtime) { + unsigned int flags = 0; struct tb_port *port; int err; + tb_sw_dbg(sw, "suspending switch\n"); + err = tb_plug_events_active(sw, false); if (err) return; tb_switch_for_each_port(sw, port) { if (tb_port_has_remote(port)) - tb_switch_suspend(port->remote->sw); + tb_switch_suspend(port->remote->sw, runtime); } + if (runtime) { + /* Trigger wake when something is plugged in/out */ + flags |= TB_WAKE_ON_CONNECT | TB_WAKE_ON_DISCONNECT; + flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE; + } else if (device_may_wakeup(&sw->dev)) { + flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE; + } + + tb_switch_set_wake(sw, flags); + if (tb_switch_is_usb4(sw)) usb4_switch_set_sleep(sw); else diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index f507815040eb..214fbc92c1b7 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include "tb.h" #include "tb_regs.h" @@ -22,13 +23,21 @@ * events and exit if this is not set (it needs to * acquire the lock one more time). Used to drain wq * after cfg has been paused. + * @remove_work: Work used to remove any unplugged routers after + * runtime resume */ struct tb_cm { struct list_head tunnel_list; struct list_head dp_resources; bool hotplug_active; + struct delayed_work remove_work; }; +static inline struct tb *tcm_to_tb(struct tb_cm *tcm) +{ + return ((void *)tcm - sizeof(struct tb)); +} + struct tb_hotplug_event { struct work_struct work; struct tb *tb; @@ -140,6 +149,29 @@ static void tb_discover_tunnels(struct tb_switch *sw) } } +static int tb_port_configure_xdomain(struct tb_port *port) +{ + /* + * XDomain paths currently only support single lane so we must + * disable the other lane according to USB4 spec. + */ + tb_port_disable(port->dual_link_port); + + if (tb_switch_is_usb4(port->sw)) + return usb4_port_configure_xdomain(port); + return tb_lc_configure_xdomain(port); +} + +static void tb_port_unconfigure_xdomain(struct tb_port *port) +{ + if (tb_switch_is_usb4(port->sw)) + usb4_port_unconfigure_xdomain(port); + else + tb_lc_unconfigure_xdomain(port); + + tb_port_enable(port->dual_link_port); +} + static void tb_scan_xdomain(struct tb_port *port) { struct tb_switch *sw = port->sw; @@ -158,6 +190,7 @@ static void tb_scan_xdomain(struct tb_port *port) NULL); if (xd) { tb_port_at(route, sw)->xdomain = xd; + tb_port_configure_xdomain(port); tb_xdomain_add(xd); } } @@ -502,8 +535,13 @@ static void tb_scan_switch(struct tb_switch *sw) { struct tb_port *port; + pm_runtime_get_sync(&sw->dev); + tb_switch_for_each_port(sw, port) tb_scan_port(port); + + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); } /** @@ -566,6 +604,7 @@ static void tb_scan_port(struct tb_port *port) */ if (port->xdomain) { tb_xdomain_remove(port->xdomain); + tb_port_unconfigure_xdomain(port); port->xdomain = NULL; } @@ -577,6 +616,12 @@ static void tb_scan_port(struct tb_port *port) if (!tcm->hotplug_active) dev_set_uevent_suppress(&sw->dev, true); + /* + * At the moment Thunderbolt 2 and beyond (devices with LC) we + * can support runtime PM. + */ + sw->rpm = sw->generation > 1; + if (tb_switch_add(sw)) { tb_switch_put(sw); return; @@ -592,8 +637,9 @@ static void tb_scan_port(struct tb_port *port) } /* Enable lane bonding if supported */ - if (tb_switch_lane_bonding_enable(sw)) - tb_sw_warn(sw, "failed to enable lane bonding\n"); + tb_switch_lane_bonding_enable(sw); + /* Set the link configured */ + tb_switch_configure_link(sw); if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to enable TMU\n"); @@ -636,6 +682,11 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) * deallocated properly. */ tb_switch_dealloc_dp_resource(src_port->sw, src_port); + /* Now we can allow the domain to runtime suspend again */ + pm_runtime_mark_last_busy(&dst_port->sw->dev); + pm_runtime_put_autosuspend(&dst_port->sw->dev); + pm_runtime_mark_last_busy(&src_port->sw->dev); + pm_runtime_put_autosuspend(&src_port->sw->dev); fallthrough; case TB_TUNNEL_USB3: @@ -682,6 +733,7 @@ static void tb_free_unplugged_children(struct tb_switch *sw) if (port->remote->sw->is_unplugged) { tb_retimer_remove_all(port); tb_remove_dp_resources(port->remote->sw); + tb_switch_unconfigure_link(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); port->remote = NULL; @@ -821,9 +873,20 @@ static void tb_tunnel_dp(struct tb *tb) return; } + /* + * DP stream needs the domain to be active so runtime resume + * both ends of the tunnel. + * + * This should bring the routers in the middle active as well + * and keeps the domain from runtime suspending while the DP + * tunnel is active. + */ + pm_runtime_get_sync(&in->sw->dev); + pm_runtime_get_sync(&out->sw->dev); + if (tb_switch_alloc_dp_resource(in->sw, in)) { tb_port_dbg(in, "no resource available for DP IN, not tunneling\n"); - return; + goto err_rpm_put; } /* Make all unused USB3 bandwidth available for the new DP tunnel */ @@ -862,6 +925,11 @@ err_reclaim: tb_reclaim_usb3_bandwidth(tb, in, out); err_dealloc_dp: tb_switch_dealloc_dp_resource(in->sw, in); +err_rpm_put: + pm_runtime_mark_last_busy(&out->sw->dev); + pm_runtime_put_autosuspend(&out->sw->dev); + pm_runtime_mark_last_busy(&in->sw->dev); + pm_runtime_put_autosuspend(&in->sw->dev); } static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) @@ -911,6 +979,29 @@ static void tb_dp_resource_available(struct tb *tb, struct tb_port *port) tb_tunnel_dp(tb); } +static void tb_disconnect_and_release_dp(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel, *n; + + /* + * Tear down all DP tunnels and release their resources. They + * will be re-established after resume based on plug events. + */ + list_for_each_entry_safe_reverse(tunnel, n, &tcm->tunnel_list, list) { + if (tb_tunnel_is_dp(tunnel)) + tb_deactivate_and_free_tunnel(tunnel); + } + + while (!list_empty(&tcm->dp_resources)) { + struct tb_port *port; + + port = list_first_entry(&tcm->dp_resources, + struct tb_port, list); + list_del_init(&port->list); + } +} + static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw) { struct tb_port *up, *down, *port; @@ -1022,6 +1113,10 @@ static void tb_handle_hotplug(struct work_struct *work) struct tb_cm *tcm = tb_priv(tb); struct tb_switch *sw; struct tb_port *port; + + /* Bring the domain back from sleep if it was suspended */ + pm_runtime_get_sync(&tb->dev); + mutex_lock(&tb->lock); if (!tcm->hotplug_active) goto out; /* during init, suspend or shutdown */ @@ -1045,6 +1140,9 @@ static void tb_handle_hotplug(struct work_struct *work) ev->route, ev->port, ev->unplug); goto put_sw; } + + pm_runtime_get_sync(&sw->dev); + if (ev->unplug) { tb_retimer_remove_all(port); @@ -1054,6 +1152,7 @@ static void tb_handle_hotplug(struct work_struct *work) tb_free_invalid_tunnels(tb); tb_remove_dp_resources(port->remote->sw); tb_switch_tmu_disable(port->remote->sw); + tb_switch_unconfigure_link(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); port->remote = NULL; @@ -1077,6 +1176,7 @@ static void tb_handle_hotplug(struct work_struct *work) port->xdomain = NULL; __tb_disconnect_xdomain_paths(tb, xd); tb_xdomain_put(xd); + tb_port_unconfigure_xdomain(port); } else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) { tb_dp_resource_unavailable(tb, port); } else { @@ -1096,10 +1196,17 @@ static void tb_handle_hotplug(struct work_struct *work) } } + pm_runtime_mark_last_busy(&sw->dev); + pm_runtime_put_autosuspend(&sw->dev); + put_sw: tb_switch_put(sw); out: mutex_unlock(&tb->lock); + + pm_runtime_mark_last_busy(&tb->dev); + pm_runtime_put_autosuspend(&tb->dev); + kfree(ev); } @@ -1135,6 +1242,7 @@ static void tb_stop(struct tb *tb) struct tb_tunnel *tunnel; struct tb_tunnel *n; + cancel_delayed_work(&tcm->remove_work); /* tunnels are only present after everything has been initialized */ list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { /* @@ -1186,6 +1294,8 @@ static int tb_start(struct tb *tb) * root switch. */ tb->root_switch->no_nvm_upgrade = true; + /* All USB4 routers support runtime PM */ + tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch); ret = tb_switch_configure(tb->root_switch); if (ret) { @@ -1227,7 +1337,8 @@ static int tb_suspend_noirq(struct tb *tb) struct tb_cm *tcm = tb_priv(tb); tb_dbg(tb, "suspending...\n"); - tb_switch_suspend(tb->root_switch); + tb_disconnect_and_release_dp(tb); + tb_switch_suspend(tb->root_switch, false); tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ tb_dbg(tb, "suspend finished\n"); @@ -1238,17 +1349,25 @@ static void tb_restore_children(struct tb_switch *sw) { struct tb_port *port; + /* No need to restore if the router is already unplugged */ + if (sw->is_unplugged) + return; + if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to restore TMU configuration\n"); tb_switch_for_each_port(sw, port) { - if (!tb_port_has_remote(port)) + if (!tb_port_has_remote(port) && !port->xdomain) continue; - if (tb_switch_lane_bonding_enable(port->remote->sw)) - dev_warn(&sw->dev, "failed to restore lane bonding\n"); + if (port->remote) { + tb_switch_lane_bonding_enable(port->remote->sw); + tb_switch_configure_link(port->remote->sw); - tb_restore_children(port->remote->sw); + tb_restore_children(port->remote->sw); + } else if (port->xdomain) { + tb_port_configure_xdomain(port); + } } } @@ -1260,7 +1379,7 @@ static int tb_resume_noirq(struct tb *tb) tb_dbg(tb, "resuming...\n"); /* remove any pci devices the firmware might have setup */ - tb_switch_reset(tb, 0); + tb_switch_reset(tb->root_switch); tb_switch_resume(tb->root_switch); tb_free_invalid_tunnels(tb); @@ -1294,6 +1413,7 @@ static int tb_free_unplugged_xdomains(struct tb_switch *sw) if (port->xdomain && port->xdomain->is_unplugged) { tb_retimer_remove_all(port); tb_xdomain_remove(port->xdomain); + tb_port_unconfigure_xdomain(port); port->xdomain = NULL; ret++; } else if (port->remote) { @@ -1304,6 +1424,22 @@ static int tb_free_unplugged_xdomains(struct tb_switch *sw) return ret; } +static int tb_freeze_noirq(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + + tcm->hotplug_active = false; + return 0; +} + +static int tb_thaw_noirq(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + + tcm->hotplug_active = true; + return 0; +} + static void tb_complete(struct tb *tb) { /* @@ -1317,12 +1453,64 @@ static void tb_complete(struct tb *tb) mutex_unlock(&tb->lock); } +static int tb_runtime_suspend(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + + mutex_lock(&tb->lock); + tb_switch_suspend(tb->root_switch, true); + tcm->hotplug_active = false; + mutex_unlock(&tb->lock); + + return 0; +} + +static void tb_remove_work(struct work_struct *work) +{ + struct tb_cm *tcm = container_of(work, struct tb_cm, remove_work.work); + struct tb *tb = tcm_to_tb(tcm); + + mutex_lock(&tb->lock); + if (tb->root_switch) { + tb_free_unplugged_children(tb->root_switch); + tb_free_unplugged_xdomains(tb->root_switch); + } + mutex_unlock(&tb->lock); +} + +static int tb_runtime_resume(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel, *n; + + mutex_lock(&tb->lock); + tb_switch_resume(tb->root_switch); + tb_free_invalid_tunnels(tb); + tb_restore_children(tb->root_switch); + list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) + tb_tunnel_restart(tunnel); + tcm->hotplug_active = true; + mutex_unlock(&tb->lock); + + /* + * Schedule cleanup of any unplugged devices. Run this in a + * separate thread to avoid possible deadlock if the device + * removal runtime resumes the unplugged device. + */ + queue_delayed_work(tb->wq, &tcm->remove_work, msecs_to_jiffies(50)); + return 0; +} + static const struct tb_cm_ops tb_cm_ops = { .start = tb_start, .stop = tb_stop, .suspend_noirq = tb_suspend_noirq, .resume_noirq = tb_resume_noirq, + .freeze_noirq = tb_freeze_noirq, + .thaw_noirq = tb_thaw_noirq, .complete = tb_complete, + .runtime_suspend = tb_runtime_suspend, + .runtime_resume = tb_runtime_resume, .handle_event = tb_handle_event, .approve_switch = tb_tunnel_pci, .approve_xdomain_paths = tb_approve_xdomain_paths, @@ -1344,6 +1532,7 @@ struct tb *tb_probe(struct tb_nhi *nhi) tcm = tb_priv(tb); INIT_LIST_HEAD(&tcm->tunnel_list); INIT_LIST_HEAD(&tcm->dp_resources); + INIT_DELAYED_WORK(&tcm->remove_work, tb_remove_work); return tb; } diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 3c620a9203c5..a9995e21b916 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -125,6 +125,7 @@ struct tb_switch_tmu { * @rpm: The switch supports runtime PM * @authorized: Whether the switch is authorized by user or policy * @security_level: Switch supported security level + * @debugfs_dir: Pointer to the debugfs structure * @key: Contains the key used to challenge the device or %NULL if not * supported. Size of the key is %TB_SWITCH_KEY_SIZE. * @connection_id: Connection ID used with ICM messaging @@ -166,6 +167,7 @@ struct tb_switch { bool rpm; unsigned int authorized; enum tb_security_level security_level; + struct dentry *debugfs_dir; u8 *key; u8 connection_id; u8 connection_key; @@ -333,6 +335,13 @@ struct tb_path { */ #define TB_PATH_MAX_HOPS (7 * 2) +/* Possible wake types */ +#define TB_WAKE_ON_CONNECT BIT(0) +#define TB_WAKE_ON_DISCONNECT BIT(1) +#define TB_WAKE_ON_USB4 BIT(2) +#define TB_WAKE_ON_USB3 BIT(3) +#define TB_WAKE_ON_PCIE BIT(4) + /** * struct tb_cm_ops - Connection manager specific operations vector * @driver_ready: Called right after control channel is started. Used by @@ -342,6 +351,8 @@ struct tb_path { * @suspend_noirq: Connection manager specific suspend_noirq * @resume_noirq: Connection manager specific resume_noirq * @suspend: Connection manager specific suspend + * @freeze_noirq: Connection manager specific freeze_noirq + * @thaw_noirq: Connection manager specific thaw_noirq * @complete: Connection manager specific complete * @runtime_suspend: Connection manager specific runtime_suspend * @runtime_resume: Connection manager specific runtime_resume @@ -364,6 +375,8 @@ struct tb_cm_ops { int (*suspend_noirq)(struct tb *tb); int (*resume_noirq)(struct tb *tb); int (*suspend)(struct tb *tb); + int (*freeze_noirq)(struct tb *tb); + int (*thaw_noirq)(struct tb *tb); void (*complete)(struct tb *tb); int (*runtime_suspend)(struct tb *tb); int (*runtime_resume)(struct tb *tb); @@ -457,6 +470,11 @@ static inline bool tb_port_is_null(const struct tb_port *port) return port && port->port && port->config.type == TB_TYPE_PORT; } +static inline bool tb_port_is_nhi(const struct tb_port *port) +{ + return port && port->config.type == TB_TYPE_NHI; +} + static inline bool tb_port_is_pcie_down(const struct tb_port *port) { return port && port->config.type == TB_TYPE_PCIE_DOWN; @@ -593,6 +611,8 @@ void tb_domain_remove(struct tb *tb); int tb_domain_suspend_noirq(struct tb *tb); int tb_domain_resume_noirq(struct tb *tb); int tb_domain_suspend(struct tb *tb); +int tb_domain_freeze_noirq(struct tb *tb); +int tb_domain_thaw_noirq(struct tb *tb); void tb_domain_complete(struct tb *tb); int tb_domain_runtime_suspend(struct tb *tb); int tb_domain_runtime_resume(struct tb *tb); @@ -632,9 +652,9 @@ struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb, int tb_switch_configure(struct tb_switch *sw); int tb_switch_add(struct tb_switch *sw); void tb_switch_remove(struct tb_switch *sw); -void tb_switch_suspend(struct tb_switch *sw); +void tb_switch_suspend(struct tb_switch *sw, bool runtime); int tb_switch_resume(struct tb_switch *sw); -int tb_switch_reset(struct tb *tb, u64 route); +int tb_switch_reset(struct tb_switch *sw); void tb_sw_set_unplugged(struct tb_switch *sw); struct tb_port *tb_switch_find_port(struct tb_switch *sw, enum tb_port_type type); @@ -685,59 +705,89 @@ static inline struct tb_switch *tb_switch_parent(struct tb_switch *sw) static inline bool tb_switch_is_light_ridge(const struct tb_switch *sw) { - return sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE; + return sw->config.vendor_id == PCI_VENDOR_ID_INTEL && + sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE; } static inline bool tb_switch_is_eagle_ridge(const struct tb_switch *sw) { - return sw->config.device_id == PCI_DEVICE_ID_INTEL_EAGLE_RIDGE; + return sw->config.vendor_id == PCI_VENDOR_ID_INTEL && + sw->config.device_id == PCI_DEVICE_ID_INTEL_EAGLE_RIDGE; } static inline bool tb_switch_is_cactus_ridge(const struct tb_switch *sw) { - switch (sw->config.device_id) { - case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_2C: - case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C: - return true; - default: - return false; + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_2C: + case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C: + return true; + } } + return false; } static inline bool tb_switch_is_falcon_ridge(const struct tb_switch *sw) { - switch (sw->config.device_id) { - case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE: - case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE: - return true; - default: - return false; + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE: + case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE: + return true; + } } + return false; } static inline bool tb_switch_is_alpine_ridge(const struct tb_switch *sw) { - switch (sw->config.device_id) { - case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE: - case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE: - case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE: - case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE: - return true; - default: - return false; + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE: + case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE: + case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE: + case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE: + return true; + } } + return false; } static inline bool tb_switch_is_titan_ridge(const struct tb_switch *sw) { - switch (sw->config.device_id) { - case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE: - case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE: - case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE: - return true; - default: - return false; + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE: + case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE: + case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE: + return true; + } + } + return false; +} + +static inline bool tb_switch_is_ice_lake(const struct tb_switch *sw) +{ + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_ICL_NHI0: + case PCI_DEVICE_ID_INTEL_ICL_NHI1: + return true; + } + } + return false; +} + +static inline bool tb_switch_is_tiger_lake(const struct tb_switch *sw) +{ + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) { + switch (sw->config.device_id) { + case PCI_DEVICE_ID_INTEL_TGL_NHI0: + case PCI_DEVICE_ID_INTEL_TGL_NHI1: + return true; + } } + return false; } /** @@ -767,6 +817,8 @@ static inline bool tb_switch_is_icm(const struct tb_switch *sw) int tb_switch_lane_bonding_enable(struct tb_switch *sw); void tb_switch_lane_bonding_disable(struct tb_switch *sw); +int tb_switch_configure_link(struct tb_switch *sw); +void tb_switch_unconfigure_link(struct tb_switch *sw); bool tb_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in); int tb_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in); @@ -788,6 +840,8 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits); int tb_port_set_initial_credits(struct tb_port *port, u32 credits); int tb_port_clear_counter(struct tb_port *port, int counter); int tb_port_unlock(struct tb_port *port); +int tb_port_enable(struct tb_port *port); +int tb_port_disable(struct tb_port *port); int tb_port_alloc_in_hopid(struct tb_port *port, int hopid, int max_hopid); void tb_port_release_in_hopid(struct tb_port *port, int hopid); int tb_port_alloc_out_hopid(struct tb_port *port, int hopid, int max_hopid); @@ -811,7 +865,9 @@ int tb_port_get_link_speed(struct tb_port *port); int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec); int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap); +int tb_switch_next_cap(struct tb_switch *sw, unsigned int offset); int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap); +int tb_port_next_cap(struct tb_port *port, unsigned int offset); bool tb_port_is_enabled(struct tb_port *port); bool tb_usb3_port_is_enabled(struct tb_port *port); @@ -844,8 +900,11 @@ int tb_drom_read(struct tb_switch *sw); int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid); int tb_lc_read_uuid(struct tb_switch *sw, u32 *uuid); -int tb_lc_configure_link(struct tb_switch *sw); -void tb_lc_unconfigure_link(struct tb_switch *sw); +int tb_lc_configure_port(struct tb_port *port); +void tb_lc_unconfigure_port(struct tb_port *port); +int tb_lc_configure_xdomain(struct tb_port *port); +void tb_lc_unconfigure_xdomain(struct tb_port *port); +int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags); int tb_lc_set_sleep(struct tb_switch *sw); bool tb_lc_lane_bonding_possible(struct tb_switch *sw); bool tb_lc_dp_sink_query(struct tb_switch *sw, struct tb_port *in); @@ -900,9 +959,8 @@ int usb4_switch_setup(struct tb_switch *sw); int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid); int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf, size_t size); -int usb4_switch_configure_link(struct tb_switch *sw); -void usb4_switch_unconfigure_link(struct tb_switch *sw); bool usb4_switch_lane_bonding_possible(struct tb_switch *sw); +int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags); int usb4_switch_set_sleep(struct tb_switch *sw); int usb4_switch_nvm_sector_size(struct tb_switch *sw); int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, @@ -919,6 +977,10 @@ struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw, const struct tb_port *port); int usb4_port_unlock(struct tb_port *port); +int usb4_port_configure(struct tb_port *port); +void usb4_port_unconfigure(struct tb_port *port); +int usb4_port_configure_xdomain(struct tb_port *port); +void usb4_port_unconfigure_xdomain(struct tb_port *port); int usb4_port_enumerate_retimers(struct tb_port *port); int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf, @@ -945,9 +1007,35 @@ int usb4_usb3_port_allocate_bandwidth(struct tb_port *port, int *upstream_bw, int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw, int *downstream_bw); -/* keep link controller awake during update */ +/* Keep link controller awake during update */ #define QUIRK_FORCE_POWER_LINK_CONTROLLER BIT(0) void tb_check_quirks(struct tb_switch *sw); +#ifdef CONFIG_ACPI +void tb_acpi_add_links(struct tb_nhi *nhi); +#else +static inline void tb_acpi_add_links(struct tb_nhi *nhi) { } +#endif + +#ifdef CONFIG_DEBUG_FS +void tb_debugfs_init(void); +void tb_debugfs_exit(void); +void tb_switch_debugfs_init(struct tb_switch *sw); +void tb_switch_debugfs_remove(struct tb_switch *sw); +#else +static inline void tb_debugfs_init(void) { } +static inline void tb_debugfs_exit(void) { } +static inline void tb_switch_debugfs_init(struct tb_switch *sw) { } +static inline void tb_switch_debugfs_remove(struct tb_switch *sw) { } +#endif + +#ifdef CONFIG_USB4_KUNIT_TEST +int tb_test_init(void); +void tb_test_exit(void); +#else +static inline int tb_test_init(void) { return 0; } +static inline void tb_test_exit(void) { } +#endif + #endif diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h index fc208c567953..0e01dbc63e72 100644 --- a/drivers/thunderbolt/tb_msgs.h +++ b/drivers/thunderbolt/tb_msgs.h @@ -28,6 +28,7 @@ enum tb_cfg_error { TB_CFG_ERROR_LOOP = 8, TB_CFG_ERROR_HEC_ERROR_DETECTED = 12, TB_CFG_ERROR_FLOW_CONTROL_ERROR = 13, + TB_CFG_ERROR_LOCK = 15, }; /* common header */ diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index fd4fc144d17f..e7d9529822fa 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -39,6 +39,7 @@ enum tb_switch_vse_cap { enum tb_port_cap { TB_PORT_CAP_PHY = 0x01, + TB_PORT_CAP_POWER = 0x02, TB_PORT_CAP_TIME1 = 0x03, TB_PORT_CAP_ADAP = 0x04, TB_PORT_CAP_VSE = 0x05, @@ -93,6 +94,20 @@ struct tb_cap_extended_long { u16 length; } __packed; +/** + * struct tb_cap_any - Structure capable of hold every capability + * @basic: Basic capability + * @extended_short: Vendor specific capability + * @extended_long: Vendor specific extended capability + */ +struct tb_cap_any { + union { + struct tb_cap_basic basic; + struct tb_cap_extended_short extended_short; + struct tb_cap_extended_long extended_long; + }; +} __packed; + /* capabilities */ struct tb_cap_link_controller { @@ -178,6 +193,8 @@ struct tb_regs_switch_header { #define ROUTER_CS_4 0x04 #define ROUTER_CS_5 0x05 #define ROUTER_CS_5_SLP BIT(0) +#define ROUTER_CS_5_WOP BIT(1) +#define ROUTER_CS_5_WOU BIT(2) #define ROUTER_CS_5_C3S BIT(23) #define ROUTER_CS_5_PTO BIT(24) #define ROUTER_CS_5_UTO BIT(25) @@ -186,6 +203,8 @@ struct tb_regs_switch_header { #define ROUTER_CS_6 0x06 #define ROUTER_CS_6_SLPR BIT(0) #define ROUTER_CS_6_TNS BIT(1) +#define ROUTER_CS_6_WOPS BIT(2) +#define ROUTER_CS_6_WOUS BIT(3) #define ROUTER_CS_6_HCI BIT(18) #define ROUTER_CS_6_CR BIT(25) #define ROUTER_CS_7 0x07 @@ -234,7 +253,8 @@ struct tb_regs_port_header { /* DWORD 1 */ u32 first_cap_offset:8; u32 max_counters:11; - u32 __unknown1:5; + u32 counters_support:1; + u32 __unknown1:4; u32 revision:8; /* DWORD 2 */ enum tb_port_type type:24; @@ -279,6 +299,7 @@ struct tb_regs_port_header { #define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4 #define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1 #define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3 +#define LANE_ADP_CS_1_LD BIT(14) #define LANE_ADP_CS_1_LB BIT(15) #define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16) #define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT 16 @@ -301,8 +322,13 @@ struct tb_regs_port_header { #define PORT_CS_18 0x12 #define PORT_CS_18_BE BIT(8) #define PORT_CS_18_TCM BIT(9) +#define PORT_CS_18_WOU4S BIT(18) #define PORT_CS_19 0x13 #define PORT_CS_19_PC BIT(3) +#define PORT_CS_19_PID BIT(4) +#define PORT_CS_19_WOC BIT(16) +#define PORT_CS_19_WOD BIT(17) +#define PORT_CS_19_WOU4 BIT(18) /* Display Port adapter registers */ #define ADP_DP_CS_0 0x00 @@ -416,8 +442,14 @@ struct tb_regs_hop { #define TB_LC_PORT_ATTR_BE BIT(12) #define TB_LC_SX_CTRL 0x96 +#define TB_LC_SX_CTRL_WOC BIT(1) +#define TB_LC_SX_CTRL_WOD BIT(2) +#define TB_LC_SX_CTRL_WOU4 BIT(5) +#define TB_LC_SX_CTRL_WOP BIT(6) #define TB_LC_SX_CTRL_L1C BIT(16) +#define TB_LC_SX_CTRL_L1D BIT(17) #define TB_LC_SX_CTRL_L2C BIT(20) +#define TB_LC_SX_CTRL_L2D BIT(21) #define TB_LC_SX_CTRL_UPSTREAM BIT(30) #define TB_LC_SX_CTRL_SLP BIT(31) diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c index a4d78811f7e2..464c2d37b992 100644 --- a/drivers/thunderbolt/test.c +++ b/drivers/thunderbolt/test.c @@ -1623,4 +1623,15 @@ static struct kunit_suite tb_test_suite = { .name = "thunderbolt", .test_cases = tb_test_cases, }; -kunit_test_suite(tb_test_suite); + +static struct kunit_suite *tb_test_suites[] = { &tb_test_suite, NULL }; + +int tb_test_init(void) +{ + return __kunit_test_suites_init(tb_test_suites); +} + +void tb_test_exit(void) +{ + return __kunit_test_suites_exit(tb_test_suites); +} diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 2b8355e6b65f..40f13579a3fe 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -196,6 +196,46 @@ static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status) return 0; } +static void usb4_switch_check_wakes(struct tb_switch *sw) +{ + struct tb_port *port; + bool wakeup = false; + u32 val; + + if (!device_may_wakeup(&sw->dev)) + return; + + if (tb_route(sw)) { + if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1)) + return; + + tb_sw_dbg(sw, "PCIe wake: %s, USB3 wake: %s\n", + (val & ROUTER_CS_6_WOPS) ? "yes" : "no", + (val & ROUTER_CS_6_WOUS) ? "yes" : "no"); + + wakeup = val & (ROUTER_CS_6_WOPS | ROUTER_CS_6_WOUS); + } + + /* Check for any connected downstream ports for USB4 wake */ + tb_switch_for_each_port(sw, port) { + if (!tb_port_has_remote(port)) + continue; + + if (tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_18, 1)) + break; + + tb_port_dbg(port, "USB4 wake: %s\n", + (val & PORT_CS_18_WOU4S) ? "yes" : "no"); + + if (val & PORT_CS_18_WOU4S) + wakeup = true; + } + + if (wakeup) + pm_wakeup_event(&sw->dev, 0); +} + static bool link_is_usb4(struct tb_port *port) { u32 val; @@ -229,6 +269,8 @@ int usb4_switch_setup(struct tb_switch *sw) u32 val = 0; int ret; + usb4_switch_check_wakes(sw); + if (!tb_route(sw)) return 0; @@ -338,87 +380,99 @@ int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf, usb4_switch_drom_read_block, sw); } -static int usb4_set_port_configured(struct tb_port *port, bool configured) +/** + * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding + * @sw: USB4 router + * + * Checks whether conditions are met so that lane bonding can be + * established with the upstream router. Call only for device routers. + */ +bool usb4_switch_lane_bonding_possible(struct tb_switch *sw) { + struct tb_port *up; int ret; u32 val; - ret = tb_port_read(port, &val, TB_CFG_PORT, - port->cap_usb4 + PORT_CS_19, 1); + up = tb_upstream_port(sw); + ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1); if (ret) - return ret; - - if (configured) - val |= PORT_CS_19_PC; - else - val &= ~PORT_CS_19_PC; + return false; - return tb_port_write(port, &val, TB_CFG_PORT, - port->cap_usb4 + PORT_CS_19, 1); + return !!(val & PORT_CS_18_BE); } /** - * usb4_switch_configure_link() - Set upstream USB4 link configured + * usb4_switch_set_wake() - Enabled/disable wake * @sw: USB4 router + * @flags: Wakeup flags (%0 to disable) * - * Sets the upstream USB4 link to be configured for power management - * purposes. + * Enables/disables router to wake up from sleep. */ -int usb4_switch_configure_link(struct tb_switch *sw) +int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags) { - struct tb_port *up; + struct tb_port *port; + u64 route = tb_route(sw); + u32 val; + int ret; - if (!tb_route(sw)) - return 0; + /* + * Enable wakes coming from all USB4 downstream ports (from + * child routers). For device routers do this also for the + * upstream USB4 port. + */ + tb_switch_for_each_port(sw, port) { + if (!route && tb_is_upstream_port(port)) + continue; - up = tb_upstream_port(sw); - return usb4_set_port_configured(up, true); -} + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; -/** - * usb4_switch_unconfigure_link() - Un-set upstream USB4 link configuration - * @sw: USB4 router - * - * Reverse of usb4_switch_configure_link(). - */ -void usb4_switch_unconfigure_link(struct tb_switch *sw) -{ - struct tb_port *up; + val &= ~(PORT_CS_19_WOC | PORT_CS_19_WOD | PORT_CS_19_WOU4); - if (sw->is_unplugged || !tb_route(sw)) - return; + if (flags & TB_WAKE_ON_CONNECT) + val |= PORT_CS_19_WOC; + if (flags & TB_WAKE_ON_DISCONNECT) + val |= PORT_CS_19_WOD; + if (flags & TB_WAKE_ON_USB4) + val |= PORT_CS_19_WOU4; - up = tb_upstream_port(sw); - usb4_set_port_configured(up, false); -} + ret = tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + } -/** - * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding - * @sw: USB4 router - * - * Checks whether conditions are met so that lane bonding can be - * established with the upstream router. Call only for device routers. - */ -bool usb4_switch_lane_bonding_possible(struct tb_switch *sw) -{ - struct tb_port *up; - int ret; - u32 val; + /* + * Enable wakes from PCIe and USB 3.x on this router. Only + * needed for device routers. + */ + if (route) { + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; - up = tb_upstream_port(sw); - ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1); - if (ret) - return false; + val &= ~(ROUTER_CS_5_WOP | ROUTER_CS_5_WOU); + if (flags & TB_WAKE_ON_USB3) + val |= ROUTER_CS_5_WOU; + if (flags & TB_WAKE_ON_PCIE) + val |= ROUTER_CS_5_WOP; - return !!(val & PORT_CS_18_BE); + ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; + } + + return 0; } /** * usb4_switch_set_sleep() - Prepare the router to enter sleep * @sw: USB4 router * - * Enables wakes and sets sleep bit for the router. Returns when the - * router sleep ready bit has been asserted. + * Sets sleep bit for the router. Returns when the router sleep ready + * bit has been asserted. */ int usb4_switch_set_sleep(struct tb_switch *sw) { @@ -795,6 +849,95 @@ int usb4_port_unlock(struct tb_port *port) return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1); } +static int usb4_port_set_configured(struct tb_port *port, bool configured) +{ + int ret; + u32 val; + + if (!port->cap_usb4) + return -EINVAL; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + if (configured) + val |= PORT_CS_19_PC; + else + val &= ~PORT_CS_19_PC; + + return tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); +} + +/** + * usb4_port_configure() - Set USB4 port configured + * @port: USB4 router + * + * Sets the USB4 link to be configured for power management purposes. + */ +int usb4_port_configure(struct tb_port *port) +{ + return usb4_port_set_configured(port, true); +} + +/** + * usb4_port_unconfigure() - Set USB4 port unconfigured + * @port: USB4 router + * + * Sets the USB4 link to be unconfigured for power management purposes. + */ +void usb4_port_unconfigure(struct tb_port *port) +{ + usb4_port_set_configured(port, false); +} + +static int usb4_set_xdomain_configured(struct tb_port *port, bool configured) +{ + int ret; + u32 val; + + if (!port->cap_usb4) + return -EINVAL; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + if (configured) + val |= PORT_CS_19_PID; + else + val &= ~PORT_CS_19_PID; + + return tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); +} + +/** + * usb4_port_configure_xdomain() - Configure port for XDomain + * @port: USB4 port connected to another host + * + * Marks the USB4 port as being connected to another host. Returns %0 in + * success and negative errno in failure. + */ +int usb4_port_configure_xdomain(struct tb_port *port) +{ + return usb4_set_xdomain_configured(port, true); +} + +/** + * usb4_port_unconfigure_xdomain() - Unconfigure port for XDomain + * @port: USB4 port that was connected to another host + * + * Clears USB4 port from being marked as XDomain. + */ +void usb4_port_unconfigure_xdomain(struct tb_port *port) +{ + usb4_set_xdomain_configured(port, false); +} + static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit, u32 value, int timeout_msec) { diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index ea66f8f385ba..e62a770a5d3b 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -230,12 +230,12 @@ CXACRU__ATTR_INIT(_name) static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) { - return snprintf(buf, PAGE_SIZE, "%u\n", value); + return sprintf(buf, "%u\n", value); } static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) { - return snprintf(buf, PAGE_SIZE, "%d\n", value); + return sprintf(buf, "%d\n", value); } static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) @@ -255,8 +255,8 @@ static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) static char *str[] = { "no", "yes" }; if (unlikely(value >= ARRAY_SIZE(str))) - return snprintf(buf, PAGE_SIZE, "%u\n", value); - return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); + return sprintf(buf, "%u\n", value); + return sprintf(buf, "%s\n", str[value]); } static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf) @@ -264,8 +264,8 @@ static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf) static char *str[] = { NULL, "not connected", "connected", "lost" }; if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL)) - return snprintf(buf, PAGE_SIZE, "%u\n", value); - return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); + return sprintf(buf, "%u\n", value); + return sprintf(buf, "%s\n", str[value]); } static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) @@ -275,8 +275,8 @@ static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) "waiting", "initialising" }; if (unlikely(value >= ARRAY_SIZE(str))) - return snprintf(buf, PAGE_SIZE, "%u\n", value); - return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); + return sprintf(buf, "%u\n", value); + return sprintf(buf, "%s\n", str[value]); } static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) @@ -288,8 +288,8 @@ static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) "ITU-T G.992.2 (G.LITE)" }; if (unlikely(value >= ARRAY_SIZE(str))) - return snprintf(buf, PAGE_SIZE, "%u\n", value); - return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); + return sprintf(buf, "%u\n", value); + return sprintf(buf, "%s\n", str[value]); } /* @@ -309,8 +309,7 @@ static ssize_t mac_address_show(struct device *dev, if (instance == NULL || instance->usbatm->atm_dev == NULL) return -ENODEV; - return snprintf(buf, PAGE_SIZE, "%pM\n", - instance->usbatm->atm_dev->esi); + return sprintf(buf, "%pM\n", instance->usbatm->atm_dev->esi); } static ssize_t adsl_state_show(struct device *dev, @@ -326,8 +325,8 @@ static ssize_t adsl_state_show(struct device *dev, value = instance->card_info[CXINF_LINE_STARTABLE]; if (unlikely(value >= ARRAY_SIZE(str))) - return snprintf(buf, PAGE_SIZE, "%u\n", value); - return snprintf(buf, PAGE_SIZE, "%s\n", str[value]); + return sprintf(buf, "%u\n", value); + return sprintf(buf, "%s\n", str[value]); } static ssize_t adsl_state_store(struct device *dev, diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 4e12a32ca392..56fe30d247da 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -511,9 +511,10 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, ** receive ** **************/ -static void usbatm_rx_process(unsigned long data) +static void usbatm_rx_process(struct tasklet_struct *t) { - struct usbatm_data *instance = (struct usbatm_data *)data; + struct usbatm_data *instance = from_tasklet(instance, t, + rx_channel.tasklet); struct urb *urb; while ((urb = usbatm_pop_urb(&instance->rx_channel))) { @@ -564,9 +565,10 @@ static void usbatm_rx_process(unsigned long data) ** send ** ***********/ -static void usbatm_tx_process(unsigned long data) +static void usbatm_tx_process(struct tasklet_struct *t) { - struct usbatm_data *instance = (struct usbatm_data *)data; + struct usbatm_data *instance = from_tasklet(instance, t, + tx_channel.tasklet); struct sk_buff *skb = instance->current_skb; struct urb *urb = NULL; const unsigned int buf_size = instance->tx_channel.buf_size; @@ -1069,8 +1071,8 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, usbatm_init_channel(&instance->rx_channel); usbatm_init_channel(&instance->tx_channel); - tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance); - tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance); + tasklet_setup(&instance->rx_channel.tasklet, usbatm_rx_process); + tasklet_setup(&instance->tx_channel.tasklet, usbatm_tx_process); instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding; instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding; instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance; diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index 60f4711717d2..e65f1a0ae80b 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -1123,9 +1123,9 @@ static void c67x00_do_work(struct c67x00_hcd *c67x00) /* -------------------------------------------------------------------------- */ -static void c67x00_sched_tasklet(unsigned long __c67x00) +static void c67x00_sched_tasklet(struct tasklet_struct *t) { - struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00; + struct c67x00_hcd *c67x00 = from_tasklet(c67x00, t, tasklet); c67x00_do_work(c67x00); } @@ -1136,8 +1136,7 @@ void c67x00_sched_kick(struct c67x00_hcd *c67x00) int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00) { - tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet, - (unsigned long)c67x00); + tasklet_setup(&c67x00->tasklet, c67x00_sched_tasklet); return 0; } diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c index aba988e71958..54a2d70a9c73 100644 --- a/drivers/usb/cdns3/cdns3-imx.c +++ b/drivers/usb/cdns3/cdns3-imx.c @@ -15,6 +15,8 @@ #include <linux/io.h> #include <linux/of_platform.h> #include <linux/iopoll.h> +#include <linux/pm_runtime.h> +#include "core.h" #define USB3_CORE_CTRL1 0x00 #define USB3_CORE_CTRL2 0x04 @@ -32,7 +34,7 @@ /* Register bits definition */ /* USB3_CORE_CTRL1 */ -#define SW_RESET_MASK (0x3f << 26) +#define SW_RESET_MASK GENMASK(31, 26) #define PWR_SW_RESET BIT(31) #define APB_SW_RESET BIT(30) #define AXI_SW_RESET BIT(29) @@ -53,8 +55,8 @@ #define LPM_CLK_REQ BIT(28) #define DEVU3_WAEKUP_EN BIT(14) #define OTG_WAKEUP_EN BIT(12) -#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */ -#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */ +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */ +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */ /* USB3_CORE_STATUS */ #define MDCTRL_CLK_STATUS BIT(15) @@ -66,11 +68,30 @@ #define CLK_VALID_COMPARE_BITS (0xf << 28) #define PHY_REFCLK_REQ (1 << 0) +/* OTG registers definition */ +#define OTGSTS 0x4 +/* OTGSTS */ +#define OTG_NRDY BIT(11) + +/* xHCI registers definition */ +#define XECP_PM_PMCSR 0x8018 +#define XECP_AUX_CTRL_REG1 0x8120 + +/* Register bits definition */ +/* XECP_AUX_CTRL_REG1 */ +#define CFG_RXDET_P3_EN BIT(15) + +/* XECP_PM_PMCSR */ +#define PS_MASK GENMASK(1, 0) +#define PS_D0 0 +#define PS_D1 1 + struct cdns_imx { struct device *dev; void __iomem *noncore; struct clk_bulk_data *clks; int num_clks; + struct platform_device *cdns3_pdev; }; static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset) @@ -126,6 +147,20 @@ static int cdns_imx_noncore_init(struct cdns_imx *data) return ret; } +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup); +static struct cdns3_platform_data cdns_imx_pdata = { + .platform_suspend = cdns_imx_platform_suspend, +}; + +static const struct of_dev_auxdata cdns_imx_auxdata[] = { + { + .compatible = "cdns,usb3", + .platform_data = &cdns_imx_pdata, + }, + {}, +}; + static int cdns_imx_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -162,14 +197,18 @@ static int cdns_imx_probe(struct platform_device *pdev) if (ret) goto err; - ret = of_platform_populate(node, NULL, NULL, dev); + ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev); if (ret) { dev_err(dev, "failed to create children: %d\n", ret); goto err; } - return ret; + device_set_wakeup_capable(dev, true); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_forbid(dev); + return ret; err: clk_bulk_disable_unprepare(data->num_clks, data->clks); return ret; @@ -194,6 +233,147 @@ static int cdns_imx_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static void cdns3_set_wakeup(struct cdns_imx *data, bool enable) +{ + u32 value; + + value = cdns_imx_readl(data, USB3_INT_REG); + if (enable) + value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN; + else + value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN); + + cdns_imx_writel(data, USB3_INT_REG, value); +} + +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + struct device *parent = dev->parent; + struct cdns_imx *data = dev_get_drvdata(parent); + void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs); + void __iomem *xhci_regs = cdns->xhci_regs; + u32 value; + int ret = 0; + + if (cdns->role != USB_ROLE_HOST) + return 0; + + if (suspend) { + /* SW request low power when all usb ports allow to it ??? */ + value = readl(xhci_regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D1; + writel(value, xhci_regs + XECP_PM_PMCSR); + + /* mdctrl_clk_sel */ + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value |= MDCTRL_CLK_SEL; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + /* wait for mdctrl_clk_status */ + value = cdns_imx_readl(data, USB3_CORE_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value, + (value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS, + 10, 100000); + if (ret) + dev_warn(parent, "wait mdctrl_clk_status timeout\n"); + + /* wait lpm_clk_req to be 0 */ + value = cdns_imx_readl(data, USB3_INT_REG); + ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value, + (value & LPM_CLK_REQ) != LPM_CLK_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait lpm_clk_req timeout\n"); + + /* wait phy_refclk_req to be 0 */ + value = cdns_imx_readl(data, USB3_SSPHY_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value, + (value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait phy_refclk_req timeout\n"); + + cdns3_set_wakeup(data, wakeup); + } else { + cdns3_set_wakeup(data, false); + + /* SW request D0 */ + value = readl(xhci_regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D0; + writel(value, xhci_regs + XECP_PM_PMCSR); + + /* clr CFG_RXDET_P3_EN */ + value = readl(xhci_regs + XECP_AUX_CTRL_REG1); + value &= ~CFG_RXDET_P3_EN; + writel(value, xhci_regs + XECP_AUX_CTRL_REG1); + + /* clear mdctrl_clk_sel */ + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value &= ~MDCTRL_CLK_SEL; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + /* wait CLK_125_REQ to be 1 */ + value = cdns_imx_readl(data, USB3_INT_REG); + ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value, + (value & CLK_125_REQ) == CLK_125_REQ, + 10, 100000); + if (ret) + dev_warn(parent, "wait CLK_125_REQ timeout\n"); + + /* wait for mdctrl_clk_status is cleared */ + value = cdns_imx_readl(data, USB3_CORE_STATUS); + ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value, + (value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS, + 10, 100000); + if (ret) + dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n"); + + /* Wait until OTG_NRDY is 0 */ + value = readl(otg_regs + OTGSTS); + ret = readl_poll_timeout(otg_regs + OTGSTS, value, + (value & OTG_NRDY) != OTG_NRDY, + 10, 100000); + if (ret) + dev_warn(parent, "wait OTG ready timeout\n"); + } + + return ret; + +} + +static int cdns_imx_resume(struct device *dev) +{ + struct cdns_imx *data = dev_get_drvdata(dev); + + return clk_bulk_prepare_enable(data->num_clks, data->clks); +} + +static int cdns_imx_suspend(struct device *dev) +{ + struct cdns_imx *data = dev_get_drvdata(dev); + + clk_bulk_disable_unprepare(data->num_clks, data->clks); + + return 0; +} +#else +static int cdns_imx_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + return 0; +} + +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops cdns_imx_pm_ops = { + SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL) +}; + static const struct of_device_id cdns_imx_of_match[] = { { .compatible = "fsl,imx8qm-usb3", }, {}, @@ -206,6 +386,7 @@ static struct platform_driver cdns_imx_driver = { .driver = { .name = "cdns3-imx", .of_match_table = cdns_imx_of_match, + .pm = &cdns_imx_pm_ops, }, }; module_platform_driver(cdns_imx_driver); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index 5c1586ec7824..a0f73d4711ae 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -280,6 +280,10 @@ int cdns3_hw_role_switch(struct cdns3 *cdns) enum usb_role real_role, current_role; int ret = 0; + /* Depends on role switch class */ + if (cdns->role_sw) + return 0; + pm_runtime_get_sync(cdns->dev); current_role = cdns->role; @@ -371,6 +375,50 @@ pm_put: return ret; } +static int set_phy_power_on(struct cdns3 *cdns) +{ + int ret; + + ret = phy_power_on(cdns->usb2_phy); + if (ret) + return ret; + + ret = phy_power_on(cdns->usb3_phy); + if (ret) + phy_power_off(cdns->usb2_phy); + + return ret; +} + +static void set_phy_power_off(struct cdns3 *cdns) +{ + phy_power_off(cdns->usb3_phy); + phy_power_off(cdns->usb2_phy); +} + +/** + * cdns3_wakeup_irq - interrupt handler for wakeup events + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_wakeup_irq(int irq, void *data) +{ + struct cdns3 *cdns = data; + + if (cdns->in_lpm) { + disable_irq_nosync(irq); + cdns->wakeup_pending = true; + if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev) + pm_request_resume(&cdns->host_dev->dev); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + /** * cdns3_probe - probe for cdns3 core device * @pdev: Pointer to cdns3 core platform device @@ -397,6 +445,7 @@ static int cdns3_probe(struct platform_device *pdev) return -ENOMEM; cdns->dev = dev; + cdns->pdata = dev_get_platdata(dev); platform_set_drvdata(pdev, cdns); @@ -443,8 +492,21 @@ static int cdns3_probe(struct platform_device *pdev) return -ENXIO; } + cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable"); + cdns->otg_res = *res; + cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup"); + if (cdns->wakeup_irq == -EPROBE_DEFER) + return cdns->wakeup_irq; + else if (cdns->wakeup_irq == 0) + return -EINVAL; + + if (cdns->wakeup_irq < 0) { + dev_dbg(dev, "couldn't get wakeup irq\n"); + cdns->wakeup_irq = 0x0; + } + mutex_init(&cdns->mutex); cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy"); @@ -463,14 +525,10 @@ static int cdns3_probe(struct platform_device *pdev) if (ret) goto err1; - ret = phy_power_on(cdns->usb2_phy); + ret = set_phy_power_on(cdns); if (ret) goto err2; - ret = phy_power_on(cdns->usb3_phy); - if (ret) - goto err3; - sw_desc.set = cdns3_role_set; sw_desc.get = cdns3_role_get; sw_desc.allow_userspace_control = true; @@ -482,20 +540,34 @@ static int cdns3_probe(struct platform_device *pdev) if (IS_ERR(cdns->role_sw)) { ret = PTR_ERR(cdns->role_sw); dev_warn(dev, "Unable to register Role Switch\n"); - goto err4; + goto err3; + } + + if (cdns->wakeup_irq) { + ret = devm_request_irq(cdns->dev, cdns->wakeup_irq, + cdns3_wakeup_irq, + IRQF_SHARED, + dev_name(cdns->dev), cdns); + + if (ret) { + dev_err(cdns->dev, "couldn't register wakeup irq handler\n"); + goto err3; + } } ret = cdns3_drd_init(cdns); if (ret) - goto err5; + goto err4; ret = cdns3_core_init_role(cdns); if (ret) - goto err5; + goto err4; + spin_lock_init(&cdns->lock); device_set_wakeup_capable(dev, true); pm_runtime_set_active(dev); pm_runtime_enable(dev); + pm_runtime_forbid(dev); /* * The controller needs less time between bus and controller suspend, @@ -508,14 +580,11 @@ static int cdns3_probe(struct platform_device *pdev) dev_dbg(dev, "Cadence USB3 core: probe succeed\n"); return 0; -err5: +err4: cdns3_drd_exit(cdns); usb_role_switch_unregister(cdns->role_sw); -err4: - phy_power_off(cdns->usb3_phy); - err3: - phy_power_off(cdns->usb2_phy); + set_phy_power_off(cdns); err2: phy_exit(cdns->usb3_phy); err1: @@ -539,59 +608,128 @@ static int cdns3_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); cdns3_exit_roles(cdns); usb_role_switch_unregister(cdns->role_sw); - phy_power_off(cdns->usb2_phy); - phy_power_off(cdns->usb3_phy); + set_phy_power_off(cdns); phy_exit(cdns->usb2_phy); phy_exit(cdns->usb3_phy); return 0; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM -static int cdns3_suspend(struct device *dev) +static int cdns3_set_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + int ret = 0; + + if (cdns->pdata && cdns->pdata->platform_suspend) + ret = cdns->pdata->platform_suspend(dev, suspend, wakeup); + + return ret; +} + +static int cdns3_controller_suspend(struct device *dev, pm_message_t msg) { struct cdns3 *cdns = dev_get_drvdata(dev); + bool wakeup; unsigned long flags; - if (cdns->role == USB_ROLE_HOST) + if (cdns->in_lpm) return 0; - if (pm_runtime_status_suspended(dev)) - pm_runtime_resume(dev); + if (PMSG_IS_AUTO(msg)) + wakeup = true; + else + wakeup = device_may_wakeup(dev); - if (cdns->roles[cdns->role]->suspend) { - spin_lock_irqsave(&cdns->gadget_dev->lock, flags); - cdns->roles[cdns->role]->suspend(cdns, false); - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags); - } + cdns3_set_platform_suspend(cdns->dev, true, wakeup); + set_phy_power_off(cdns); + spin_lock_irqsave(&cdns->lock, flags); + cdns->in_lpm = true; + spin_unlock_irqrestore(&cdns->lock, flags); + dev_dbg(cdns->dev, "%s ends\n", __func__); return 0; } -static int cdns3_resume(struct device *dev) +static int cdns3_controller_resume(struct device *dev, pm_message_t msg) { struct cdns3 *cdns = dev_get_drvdata(dev); + int ret; unsigned long flags; - if (cdns->role == USB_ROLE_HOST) + if (!cdns->in_lpm) return 0; - if (cdns->roles[cdns->role]->resume) { - spin_lock_irqsave(&cdns->gadget_dev->lock, flags); + ret = set_phy_power_on(cdns); + if (ret) + return ret; + + cdns3_set_platform_suspend(cdns->dev, false, false); + + spin_lock_irqsave(&cdns->lock, flags); + if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg)) cdns->roles[cdns->role]->resume(cdns, false); - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags); + + cdns->in_lpm = false; + spin_unlock_irqrestore(&cdns->lock, flags); + if (cdns->wakeup_pending) { + cdns->wakeup_pending = false; + enable_irq(cdns->wakeup_irq); + } + dev_dbg(cdns->dev, "%s ends\n", __func__); + + return ret; +} + +static int cdns3_runtime_suspend(struct device *dev) +{ + return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND); +} + +static int cdns3_runtime_resume(struct device *dev) +{ + return cdns3_controller_resume(dev, PMSG_AUTO_RESUME); +} +#ifdef CONFIG_PM_SLEEP + +static int cdns3_suspend(struct device *dev) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + unsigned long flags; + + if (pm_runtime_status_suspended(dev)) + pm_runtime_resume(dev); + + if (cdns->roles[cdns->role]->suspend) { + spin_lock_irqsave(&cdns->lock, flags); + cdns->roles[cdns->role]->suspend(cdns, false); + spin_unlock_irqrestore(&cdns->lock, flags); } + return cdns3_controller_suspend(dev, PMSG_SUSPEND); +} + +static int cdns3_resume(struct device *dev) +{ + int ret; + + ret = cdns3_controller_resume(dev, PMSG_RESUME); + if (ret) + return ret; + pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); - return 0; + return ret; } -#endif +#endif /* CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM */ static const struct dev_pm_ops cdns3_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume) + SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL) }; #ifdef CONFIG_OF diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h index 1ad1f1fe61e9..8a40d53d5ede 100644 --- a/drivers/usb/cdns3/core.h +++ b/drivers/usb/cdns3/core.h @@ -38,6 +38,12 @@ struct cdns3_role_driver { }; #define CDNS3_XHCI_RESOURCES_NUM 2 + +struct cdns3_platform_data { + int (*platform_suspend)(struct device *dev, + bool suspend, bool wakeup); +}; + /** * struct cdns3 - Representation of Cadence USB3 DRD controller. * @dev: pointer to Cadence device struct @@ -50,6 +56,7 @@ struct cdns3_role_driver { * @otg_regs: pointer to base of otg registers * @otg_irq: irq number for otg controller * @dev_irq: irq number for device controller + * @wakeup_irq: irq number for wakeup event, it is optional * @roles: array of supported roles for this controller * @role: current role * @host_dev: the child host device pointer for cdns3 core @@ -62,6 +69,10 @@ struct cdns3_role_driver { * This field based on firmware setting, kernel configuration * and hardware configuration. * @role_sw: pointer to role switch object. + * @in_lpm: indicate the controller is in low power mode + * @wakeup_pending: wakeup interrupt pending + * @pdata: platform data from glue layer + * @lock: spinlock structure */ struct cdns3 { struct device *dev; @@ -76,9 +87,11 @@ struct cdns3 { #define CDNS3_CONTROLLER_V0 0 #define CDNS3_CONTROLLER_V1 1 u32 version; + bool phyrst_a_enable; int otg_irq; int dev_irq; + int wakeup_irq; struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1]; enum usb_role role; struct platform_device *host_dev; @@ -89,6 +102,10 @@ struct cdns3 { struct mutex mutex; enum usb_dr_mode dr_mode; struct usb_role_switch *role_sw; + bool in_lpm; + bool wakeup_pending; + struct cdns3_platform_data *pdata; + spinlock_t lock; }; int cdns3_hw_role_switch(struct cdns3 *cdns); diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c index 6234bcd6158a..38ccd29e4cde 100644 --- a/drivers/usb/cdns3/drd.c +++ b/drivers/usb/cdns3/drd.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/iopoll.h> #include <linux/usb/otg.h> +#include <linux/phy/phy.h> #include "gadget.h" #include "drd.h" @@ -42,6 +43,18 @@ int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode) reg = readl(&cdns->otg_v1_regs->override); reg |= OVERRIDE_IDPULLUP; writel(reg, &cdns->otg_v1_regs->override); + + /* + * Enable work around feature built into the + * controller to address issue with RX Sensitivity + * est (EL_17) for USB2 PHY. The issue only occures + * for 0x0002450D controller version. + */ + if (cdns->phyrst_a_enable) { + reg = readl(&cdns->otg_v1_regs->phyrst_cfg); + reg |= PHYRST_CFG_PHYRST_A_ENABLE; + writel(reg, &cdns->otg_v1_regs->phyrst_cfg); + } } else { reg = readl(&cdns->otg_v0_regs->ctrl1); reg |= OVERRIDE_IDPULLUP_V0; @@ -145,6 +158,7 @@ int cdns3_drd_host_on(struct cdns3 *cdns) if (ret) dev_err(cdns->dev, "timeout waiting for xhci_ready\n"); + phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST); return ret; } @@ -164,6 +178,7 @@ void cdns3_drd_host_off(struct cdns3 *cdns) readl_poll_timeout_atomic(&cdns->otg_regs->state, val, !(val & OTGSTATE_HOST_STATE_MASK), 1, 2000000); + phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID); } /** @@ -190,6 +205,7 @@ int cdns3_drd_gadget_on(struct cdns3 *cdns) return ret; } + phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE); return 0; } @@ -213,6 +229,7 @@ void cdns3_drd_gadget_off(struct cdns3 *cdns) readl_poll_timeout_atomic(&cdns->otg_regs->state, val, !(val & OTGSTATE_DEV_STATE_MASK), 1, 2000000); + phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID); } /** @@ -293,6 +310,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data) if (cdns->dr_mode != USB_DR_MODE_OTG) return IRQ_NONE; + if (cdns->in_lpm) + return ret; + reg = readl(&cdns->otg_regs->ivect); if (!reg) diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h index 7e7cf7fa2dd3..f1ccae285a16 100644 --- a/drivers/usb/cdns3/drd.h +++ b/drivers/usb/cdns3/drd.h @@ -31,7 +31,7 @@ struct cdns3_otg_regs { __le32 simulate; __le32 override; __le32 susp_ctrl; - __le32 reserved4; + __le32 phyrst_cfg; __le32 anasts; __le32 adp_ramp_time; __le32 ctrl1; @@ -153,6 +153,9 @@ struct cdns3_otg_common_regs { /* Only for CDNS3_CONTROLLER_V0 version */ #define OVERRIDE_IDPULLUP_V0 BIT(24) +/* PHYRST_CFG - bitmasks */ +#define PHYRST_CFG_PHYRST_A_ENABLE BIT(0) + #define CDNS3_ID_PERIPHERAL 1 #define CDNS3_ID_HOST 0 diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index d9779abc65b2..4761c852d9c4 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -717,9 +717,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, /* send STATUS stage. Should be called only for SET_CONFIGURATION */ if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { + u32 val; + cdns3_select_ep(priv_dev, 0x00); cdns3_set_hw_configuration(priv_dev); cdns3_ep0_complete_setup(priv_dev, 0, 1); + /* wait until configuration set */ + ret = readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val, + val & USB_STS_CFGSTS_MASK, 1, 100); + if (ret == -ETIMEDOUT) + dev_warn(priv_dev->dev, "timeout for waiting configuration set\n"); + request->actual = 0; priv_dev->status_completion_no_call = true; priv_dev->pending_status_request = request; @@ -731,7 +739,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep, * ep0_queue is back. */ queue_work(system_freezable_wq, &priv_dev->pending_status_wq); - return 0; + return ret; } if (!list_empty(&priv_ep->pending_req_list)) { diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index dea649ee173b..6e7b70a2e352 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -261,8 +261,8 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) */ link_trb->control = 0; } else { - link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); - link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; + link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma)); + link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE); } return 0; } @@ -462,6 +462,36 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev, (reg) |= EP_STS_EN_DESCMISEN; \ } } while (0) +static void __cdns3_descmiss_copy_data(struct usb_request *request, + struct usb_request *descmiss_req) +{ + int length = request->actual + descmiss_req->actual; + struct scatterlist *s = request->sg; + + if (!s) { + if (length <= request->length) { + memcpy(&((u8 *)request->buf)[request->actual], + descmiss_req->buf, + descmiss_req->actual); + request->actual = length; + } else { + /* It should never occures */ + request->status = -ENOMEM; + } + } else { + if (length <= sg_dma_len(s)) { + void *p = phys_to_virt(sg_dma_address(s)); + + memcpy(&((u8 *)p)[request->actual], + descmiss_req->buf, + descmiss_req->actual); + request->actual = length; + } else { + request->status = -ENOMEM; + } + } +} + /** * cdns3_wa2_descmiss_copy_data copy data from internal requests to * request queued by class driver. @@ -488,21 +518,9 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH; length = request->actual + descmiss_req->actual; - request->status = descmiss_req->status; - - if (length <= request->length) { - memcpy(&((u8 *)request->buf)[request->actual], - descmiss_req->buf, - descmiss_req->actual); - request->actual = length; - } else { - /* It should never occures */ - request->status = -ENOMEM; - } - + __cdns3_descmiss_copy_data(request, descmiss_req); list_del_init(&descmiss_priv_req->list); - kfree(descmiss_req->buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req); --priv_ep->wa2_counter; @@ -817,6 +835,8 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, request->length); priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED); + /* All TRBs have finished, clear the counter */ + priv_req->finished_trb = 0; trace_cdns3_gadget_giveback(priv_req); if (priv_dev->dev_ver < DEV_VER_V2) { @@ -847,10 +867,10 @@ static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep) priv_ep->wa1_trb_index = 0xFFFF; if (priv_ep->wa1_cycle_bit) { priv_ep->wa1_trb->control = - priv_ep->wa1_trb->control | 0x1; + priv_ep->wa1_trb->control | cpu_to_le32(0x1); } else { priv_ep->wa1_trb->control = - priv_ep->wa1_trb->control & ~0x1; + priv_ep->wa1_trb->control & cpu_to_le32(~0x1); } } } @@ -1008,17 +1028,16 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP; if (!request->num_sgs) { - trb->buffer = TRB_BUFFER(trb_dma); + trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma)); length = request->length; } else { - trb->buffer = TRB_BUFFER(request->sg[sg_idx].dma_address); + trb->buffer = cpu_to_le32(TRB_BUFFER(request->sg[sg_idx].dma_address)); length = request->sg[sg_idx].length; } tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); - trb->length = TRB_BURST_LEN(16 /*priv_ep->trb_burst_size*/) | - TRB_LEN(length); + trb->length = cpu_to_le32(TRB_BURST_LEN(16) | TRB_LEN(length)); /* * For DEV_VER_V2 controller version we have enabled @@ -1027,11 +1046,11 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, */ if (priv_dev->dev_ver >= DEV_VER_V2) { if (priv_dev->gadget.speed == USB_SPEED_SUPER) - trb->length |= TRB_TDL_SS_SIZE(tdl); + trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(tdl)); } priv_req->flags |= REQUEST_PENDING; - trb->control = control; + trb->control = cpu_to_le32(control); trace_cdns3_prepare_trb(priv_ep, priv_req->trb); @@ -1091,6 +1110,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, struct cdns3_device *priv_dev = priv_ep->cdns3_dev; struct cdns3_request *priv_req; struct cdns3_trb *trb; + struct cdns3_trb *link_trb; dma_addr_t trb_dma; u32 togle_pcs = 1; int sg_iter = 0; @@ -1099,11 +1119,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, u32 control; int pcs; u16 total_tdl = 0; + struct scatterlist *s = NULL; + bool sg_supported = !!(request->num_mapped_sgs); if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) num_trb = priv_ep->interval; else - num_trb = request->num_sgs ? request->num_sgs : 1; + num_trb = sg_supported ? request->num_mapped_sgs : 1; if (num_trb > priv_ep->free_trbs) { priv_ep->flags |= EP_RING_FULL; @@ -1129,7 +1151,6 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, /* prepare ring */ if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) { - struct cdns3_trb *link_trb; int doorbell, dma_index; u32 ch_bit = 0; @@ -1156,13 +1177,16 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, TRBS_PER_SEGMENT > 2) ch_bit = TRB_CHAIN; - link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) | - TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit; + link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) | + TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit); } if (priv_dev->dev_ver <= DEV_VER_V2) togle_pcs = cdns3_wa1_update_guard(priv_ep, trb); + if (sg_supported) + s = request->sg; + /* set incorrect Cycle Bit for first trb*/ control = priv_ep->pcs ? 0 : TRB_CYCLE; @@ -1172,13 +1196,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, /* fill TRB */ control |= TRB_TYPE(TRB_NORMAL); - trb->buffer = TRB_BUFFER(request->num_sgs == 0 - ? trb_dma : request->sg[sg_iter].dma_address); - - if (likely(!request->num_sgs)) + if (sg_supported) { + trb->buffer = cpu_to_le32(TRB_BUFFER(sg_dma_address(s))); + length = sg_dma_len(s); + } else { + trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma)); length = request->length; - else - length = request->sg[sg_iter].length; + } if (likely(priv_dev->dev_ver >= DEV_VER_V2)) td_size = DIV_ROUND_UP(length, @@ -1187,10 +1211,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, total_tdl += DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); - trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) | - TRB_LEN(length); + trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) | + TRB_LEN(length)); if (priv_dev->gadget.speed == USB_SPEED_SUPER) - trb->length |= TRB_TDL_SS_SIZE(td_size); + trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(td_size)); else control |= TRB_TDL_HS_SIZE(td_size); @@ -1212,9 +1236,18 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, } if (sg_iter) - trb->control = control; + trb->control = cpu_to_le32(control); else - priv_req->trb->control = control; + priv_req->trb->control = cpu_to_le32(control); + + if (sg_supported) { + trb->control |= TRB_ISP; + /* Don't set chain bit for last TRB */ + if (sg_iter < num_trb - 1) + trb->control |= TRB_CHAIN; + + s = sg_next(s); + } control = 0; ++sg_iter; @@ -1226,9 +1259,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, trb = priv_req->trb; priv_req->flags |= REQUEST_PENDING; + priv_req->num_of_trb = num_trb; if (sg_iter == 1) - trb->control |= TRB_IOC | TRB_ISP; + trb->control |= cpu_to_le32(TRB_IOC | TRB_ISP); if (priv_dev->dev_ver < DEV_VER_V2 && (priv_ep->flags & EP_TDLCHK_EN)) { @@ -1254,12 +1288,27 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, /* give the TD to the consumer*/ if (togle_pcs) - trb->control = trb->control ^ 1; + trb->control = trb->control ^ cpu_to_le32(1); if (priv_dev->dev_ver <= DEV_VER_V2) cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep); - trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + if (num_trb > 1) { + int i = 0; + + while (i < num_trb) { + trace_cdns3_prepare_trb(priv_ep, trb + i); + if (trb + i == link_trb) { + trb = priv_ep->trb_pool; + num_trb = num_trb - i; + i = 0; + } else { + i++; + } + } + } else { + trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + } /* * Memory barrier - Cycle Bit must be set before trb->length and @@ -1310,7 +1359,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) { struct cdns3_endpoint *priv_ep; struct usb_ep *ep; - int val; if (priv_dev->hw_configured_flag) return; @@ -1320,10 +1368,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) cdns3_set_register_bit(&priv_dev->regs->usb_conf, USB_CONF_U1EN | USB_CONF_U2EN); - /* wait until configuration set */ - readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val, - val & USB_STS_CFGSTS_MASK, 1, 100); - priv_dev->hw_configured_flag = 1; list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { @@ -1337,7 +1381,7 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) } /** - * cdns3_request_handled - check whether request has been handled by DMA + * cdns3_trb_handled - check whether trb has been handled by DMA * * @priv_ep: extended endpoint object. * @priv_req: request object for checking @@ -1354,32 +1398,28 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) * ET = priv_req->end_trb - index of last TRB in transfer ring * CI = current_index - index of processed TRB by DMA. * - * As first step, function checks if cycle bit for priv_req->start_trb is - * correct. + * As first step, we check if the TRB between the ST and ET. + * Then, we check if cycle bit for index priv_ep->dequeue + * is correct. * * some rules: - * 1. priv_ep->dequeue never exceed current_index. + * 1. priv_ep->dequeue never equals to current_index. * 2 priv_ep->enqueue never exceed priv_ep->dequeue * 3. exception: priv_ep->enqueue == priv_ep->dequeue * and priv_ep->free_trbs is zero. * This case indicate that TR is full. * - * Then We can split recognition into two parts: + * At below two cases, the request have been handled. * Case 1 - priv_ep->dequeue < current_index * SR ... EQ ... DQ ... CI ... ER * SR ... DQ ... CI ... EQ ... ER * - * Request has been handled by DMA if ST and ET is between DQ and CI. - * * Case 2 - priv_ep->dequeue > current_index - * This situation take place when CI go through the LINK TRB at the end of + * This situation takes place when CI go through the LINK TRB at the end of * transfer ring. * SR ... CI ... EQ ... DQ ... ER - * - * Request has been handled by DMA if ET is less then CI or - * ET is greater or equal DQ. */ -static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep, +static bool cdns3_trb_handled(struct cdns3_endpoint *priv_ep, struct cdns3_request *priv_req) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; @@ -1391,9 +1431,27 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep, current_index = cdns3_get_dma_pos(priv_dev, priv_ep); doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); - trb = &priv_ep->trb_pool[priv_req->start_trb]; + /* current trb doesn't belong to this request */ + if (priv_req->start_trb < priv_req->end_trb) { + if (priv_ep->dequeue > priv_req->end_trb) + goto finish; + + if (priv_ep->dequeue < priv_req->start_trb) + goto finish; + } + + if ((priv_req->start_trb > priv_req->end_trb) && + (priv_ep->dequeue > priv_req->end_trb) && + (priv_ep->dequeue < priv_req->start_trb)) + goto finish; - if ((trb->control & TRB_CYCLE) != priv_ep->ccs) + if ((priv_req->start_trb == priv_req->end_trb) && + (priv_ep->dequeue != priv_req->end_trb)) + goto finish; + + trb = &priv_ep->trb_pool[priv_ep->dequeue]; + + if ((le32_to_cpu(trb->control) & TRB_CYCLE) != priv_ep->ccs) goto finish; if (doorbell == 1 && current_index == priv_ep->dequeue) @@ -1413,12 +1471,8 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep, !priv_ep->dequeue) goto finish; - if (priv_req->end_trb >= priv_ep->dequeue && - priv_req->end_trb < current_index) - handled = 1; + handled = 1; } else if (priv_ep->dequeue > current_index) { - if (priv_req->end_trb < current_index || - priv_req->end_trb >= priv_ep->dequeue) handled = 1; } @@ -1434,6 +1488,8 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, struct cdns3_request *priv_req; struct usb_request *request; struct cdns3_trb *trb; + bool request_handled = false; + bool transfer_end = false; while (!list_empty(&priv_ep->pending_req_list)) { request = cdns3_next_request(&priv_ep->pending_req_list); @@ -1442,7 +1498,7 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, trb = priv_ep->trb_pool + priv_ep->dequeue; /* Request was dequeued and TRB was changed to TRB_LINK. */ - if (TRB_FIELD_TO_TYPE(trb->control) == TRB_LINK) { + if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) { trace_cdns3_complete_trb(priv_ep, trb); cdns3_move_deq_to_next_trb(priv_req); } @@ -1453,20 +1509,32 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, */ cdns3_select_ep(priv_dev, priv_ep->endpoint.address); - if (!cdns3_request_handled(priv_ep, priv_req)) - goto prepare_next_td; + while (cdns3_trb_handled(priv_ep, priv_req)) { + priv_req->finished_trb++; + if (priv_req->finished_trb >= priv_req->num_of_trb) + request_handled = true; - trb = priv_ep->trb_pool + priv_ep->dequeue; - trace_cdns3_complete_trb(priv_ep, trb); + trb = priv_ep->trb_pool + priv_ep->dequeue; + trace_cdns3_complete_trb(priv_ep, trb); - if (trb != priv_req->trb) - dev_warn(priv_dev->dev, - "request_trb=0x%p, queue_trb=0x%p\n", - priv_req->trb, trb); + if (!transfer_end) + request->actual += + TRB_LEN(le32_to_cpu(trb->length)); - request->actual = TRB_LEN(le32_to_cpu(trb->length)); - cdns3_move_deq_to_next_trb(priv_req); - cdns3_gadget_giveback(priv_ep, priv_req, 0); + if (priv_req->num_of_trb > 1 && + le32_to_cpu(trb->control) & TRB_SMM) + transfer_end = true; + + cdns3_ep_inc_deq(priv_ep); + } + + if (request_handled) { + cdns3_gadget_giveback(priv_ep, priv_req, 0); + request_handled = false; + transfer_end = false; + } else { + goto prepare_next_td; + } if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && TRBS_PER_SEGMENT == 2) @@ -1574,7 +1642,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) * that host ignore the ERDY packet and driver has to send it * again. */ - if (tdl && (dbusy | !EP_STS_BUFFEMPTY(ep_sts_reg) | + if (tdl && (dbusy || !EP_STS_BUFFEMPTY(ep_sts_reg) || EP_STS_HOSTPP(ep_sts_reg))) { writel(EP_CMD_ERDY | EP_CMD_ERDY_SID(priv_ep->last_stream_id), @@ -1769,9 +1837,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, static irqreturn_t cdns3_device_irq_handler(int irq, void *data) { struct cdns3_device *priv_dev = data; + struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev); irqreturn_t ret = IRQ_NONE; u32 reg; + if (cdns->in_lpm) + return ret; + /* check USB device interrupt */ reg = readl(&priv_dev->regs->usb_ists); if (reg) { @@ -2552,10 +2624,10 @@ found: /* Update ring only if removed request is on pending_req_list list */ if (req_on_hw_ring && link_trb) { - link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma + - ((priv_req->end_trb + 1) * TRB_SIZE)); - link_trb->control = (link_trb->control & TRB_CYCLE) | - TRB_TYPE(TRB_LINK) | TRB_CHAIN; + link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma + + ((priv_req->end_trb + 1) * TRB_SIZE))); + link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) | + TRB_TYPE(TRB_LINK) | TRB_CHAIN); if (priv_ep->wa1_trb == priv_req->trb) cdns3_wa1_restore_cycle_bit(priv_ep); @@ -2610,7 +2682,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep) priv_req = to_cdns3_request(request); trb = priv_req->trb; if (trb) - trb->control = trb->control ^ TRB_CYCLE; + trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE); } writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd); @@ -2625,7 +2697,8 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep) if (request) { if (trb) - trb->control = trb->control ^ TRB_CYCLE; + trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE); + cdns3_rearm_transfer(priv_ep, 1); } @@ -2735,10 +2808,13 @@ static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on) { struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); - if (is_on) + if (is_on) { writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf); - else + } else { + writel(~0, &priv_dev->regs->ep_ists); + writel(~0, &priv_dev->regs->usb_ists); writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); + } return 0; } @@ -2779,6 +2855,8 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev) /* enable generic interrupt*/ writel(USB_IEN_INIT, ®s->usb_ien); writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, ®s->usb_conf); + /* keep Fast Access bit */ + writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr); cdns3_configure_dmult(priv_dev, NULL); } @@ -2862,6 +2940,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) /* disable interrupt for device */ writel(0, &priv_dev->regs->usb_ien); + writel(0, &priv_dev->regs->usb_pwr); writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); return 0; @@ -2984,18 +3063,26 @@ err: return -ENOMEM; } +static void cdns3_gadget_release(struct device *dev) +{ + struct cdns3_device *priv_dev = container_of(dev, + struct cdns3_device, gadget.dev); + + kfree(priv_dev); +} + void cdns3_gadget_exit(struct cdns3 *cdns) { struct cdns3_device *priv_dev; priv_dev = cdns->gadget_dev; - devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev); pm_runtime_mark_last_busy(cdns->dev); pm_runtime_put_autosuspend(cdns->dev); - usb_del_gadget_udc(&priv_dev->gadget); + usb_del_gadget(&priv_dev->gadget); + devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev); cdns3_free_all_eps(priv_dev); @@ -3015,7 +3102,7 @@ void cdns3_gadget_exit(struct cdns3 *cdns) priv_dev->setup_dma); kfree(priv_dev->zlp_buf); - kfree(priv_dev); + usb_put_gadget(&priv_dev->gadget); cdns->gadget_dev = NULL; cdns3_drd_gadget_off(cdns); } @@ -3030,6 +3117,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns) if (!priv_dev) return -ENOMEM; + usb_initialize_gadget(cdns->dev, &priv_dev->gadget, + cdns3_gadget_release); cdns->gadget_dev = priv_dev; priv_dev->sysdev = cdns->dev; priv_dev->dev = cdns->dev; @@ -3070,7 +3159,6 @@ static int cdns3_gadget_start(struct cdns3 *cdns) priv_dev->gadget.speed = USB_SPEED_UNKNOWN; priv_dev->gadget.ops = &cdns3_gadget_ops; priv_dev->gadget.name = "usb-ss-gadget"; - priv_dev->gadget.sg_supported = 1; priv_dev->gadget.quirk_avoids_skb_reserve = 1; priv_dev->gadget.irq = cdns->dev_irq; @@ -3109,6 +3197,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns) readl(&priv_dev->regs->usb_cap2)); priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver); + if (priv_dev->dev_ver >= DEV_VER_V2) + priv_dev->gadget.sg_supported = 1; priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL); if (!priv_dev->zlp_buf) { @@ -3117,10 +3207,9 @@ static int cdns3_gadget_start(struct cdns3 *cdns) } /* add USB gadget device */ - ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget); + ret = usb_add_gadget(&priv_dev->gadget); if (ret < 0) { - dev_err(priv_dev->dev, - "Failed to register USB device controller\n"); + dev_err(priv_dev->dev, "Failed to add gadget\n"); goto err4; } @@ -3133,6 +3222,7 @@ err3: err2: cdns3_free_all_eps(priv_dev); err1: + usb_put_gadget(&priv_dev->gadget); cdns->gadget_dev = NULL; return ret; } diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h index 52765b098b9e..1ccecd237530 100644 --- a/drivers/usb/cdns3/gadget.h +++ b/drivers/usb/cdns3/gadget.h @@ -966,7 +966,7 @@ struct cdns3_usb_regs { /* * USBSS-DEV DMA interface. */ -#define TRBS_PER_SEGMENT 40 +#define TRBS_PER_SEGMENT 600 #define ISO_MAX_INTERVAL 10 @@ -1030,6 +1030,11 @@ struct cdns3_trb { * When set to '1', the device will toggle its interpretation of the Cycle bit */ #define TRB_TOGGLE BIT(1) +/* + * The controller will set it if OUTSMM (OUT size mismatch) is detected, + * this bit is for normal TRB + */ +#define TRB_SMM BIT(1) /* * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was @@ -1215,6 +1220,8 @@ struct cdns3_aligned_buf { * this endpoint * @flags: flag specifying special usage of request * @list: used by internally allocated request to add to wa2_descmiss_req_list. + * @finished_trb: number of trb has already finished per request + * @num_of_trb: how many trbs in this request */ struct cdns3_request { struct usb_request request; @@ -1230,6 +1237,8 @@ struct cdns3_request { #define REQUEST_UNALIGNED BIT(4) u32 flags; struct list_head list; + int finished_trb; + int num_of_trb; }; #define to_cdns3_request(r) (container_of(r, struct cdns3_request, request)) diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c index 36c63d9ecd37..b3e2cb69762c 100644 --- a/drivers/usb/cdns3/host.c +++ b/drivers/usb/cdns3/host.c @@ -13,11 +13,13 @@ #include "core.h" #include "drd.h" #include "host-export.h" +#include <linux/usb/hcd.h> static int __cdns3_host_init(struct cdns3 *cdns) { struct platform_device *xhci; int ret; + struct usb_hcd *hcd; cdns3_drd_host_on(cdns); @@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns) goto err1; } + /* Glue needs to access xHCI region register for Power management */ + hcd = platform_get_drvdata(xhci); + if (hcd) + cdns->xhci_regs = hcd->regs; + return 0; err1: platform_device_put(xhci); diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index c39e2b615ac6..25c65accf089 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -165,6 +165,11 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) data->ulpi = 1; + of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control", + &data->emp_curr_control); + of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust", + &data->dc_vol_level_adjust); + return data; } @@ -609,7 +614,12 @@ static int __maybe_unused ci_hdrc_imx_suspend(struct device *dev) } } - return imx_controller_suspend(dev); + ret = imx_controller_suspend(dev); + if (ret) + return ret; + + pinctrl_pm_select_sleep_state(dev); + return ret; } static int __maybe_unused ci_hdrc_imx_resume(struct device *dev) @@ -617,6 +627,7 @@ static int __maybe_unused ci_hdrc_imx_resume(struct device *dev) struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); int ret; + pinctrl_pm_select_default_state(dev); ret = imx_controller_resume(dev); if (!ret && data->supports_runtime_pm) { pm_runtime_disable(dev); diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 99f846119c00..999c65390b7f 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -26,6 +26,8 @@ struct imx_usbmisc_data { unsigned int ext_vbus:1; /* Vbus from exteranl event */ struct usb_phy *usb_phy; enum usb_dr_mode available_role; /* runtime usb dr mode */ + int emp_curr_control; + int dc_vol_level_adjust; }; int imx_usbmisc_init(struct imx_usbmisc_data *data); diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index 322e4de6b24a..6d8331e7da99 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -128,6 +128,12 @@ #define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3) #define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29) +#define MX7D_USB_OTG_PHY_CFG1 0x30 +#define TXPREEMPAMPTUNE0_BIT 28 +#define TXPREEMPAMPTUNE0_MASK (3 << 28) +#define TXVREFTUNE0_BIT 20 +#define TXVREFTUNE0_MASK (0xf << 20) + #define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \ MX6_BM_ID_WAKEUP) @@ -649,6 +655,21 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID | MX7D_USBNC_AUTO_RESUME, usbmisc->base + MX7D_USBNC_USB_CTRL2); + /* PHY tuning for signal quality */ + reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1); + if (data->emp_curr_control && data->emp_curr_control <= + (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) { + reg &= ~TXPREEMPAMPTUNE0_MASK; + reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT); + } + + if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <= + (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) { + reg &= ~TXVREFTUNE0_MASK; + reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT); + } + + writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1); } spin_unlock_irqrestore(&usbmisc->lock, flags); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7f6f3ab5b8a6..30ef946a8e1a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -173,7 +173,7 @@ static int acm_wb_alloc(struct acm *acm) for (;;) { wb = &acm->wb[wbn]; if (!wb->use) { - wb->use = 1; + wb->use = true; wb->len = 0; return wbn; } @@ -191,7 +191,8 @@ static int acm_wb_is_avail(struct acm *acm) n = ACM_NW; spin_lock_irqsave(&acm->write_lock, flags); for (i = 0; i < ACM_NW; i++) - n -= acm->wb[i].use; + if(acm->wb[i].use) + n--; spin_unlock_irqrestore(&acm->write_lock, flags); return n; } @@ -201,7 +202,7 @@ static int acm_wb_is_avail(struct acm *acm) */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - wb->use = 0; + wb->use = false; acm->transmitting--; usb_autopm_put_interface_async(acm->control); } @@ -741,7 +742,7 @@ static void acm_port_shutdown(struct tty_port *port) if (!urb) break; wb = urb->context; - wb->use = 0; + wb->use = false; usb_autopm_put_interface_async(acm->control); } @@ -792,7 +793,7 @@ static int acm_tty_write(struct tty_struct *tty, wb = &acm->wb[wbn]; if (!acm->dev) { - wb->use = 0; + wb->use = false; spin_unlock_irqrestore(&acm->write_lock, flags); return -ENODEV; } @@ -804,7 +805,7 @@ static int acm_tty_write(struct tty_struct *tty, stat = usb_autopm_get_interface_async(acm->control); if (stat) { - wb->use = 0; + wb->use = false; spin_unlock_irqrestore(&acm->write_lock, flags); return stat; } @@ -1196,9 +1197,6 @@ static int acm_probe(struct usb_interface *intf, return -EINVAL; } - if (!intf->cur_altsetting) - return -EINVAL; - if (!buflen) { if (intf->cur_altsetting->endpoint && intf->cur_altsetting->endpoint->extralen && @@ -1221,39 +1219,42 @@ static int acm_probe(struct usb_interface *intf, call_intf_num = cmgmd->bDataInterface; if (!union_header) { - if (call_intf_num > 0) { + if (intf->cur_altsetting->desc.bNumEndpoints == 3) { + dev_dbg(&intf->dev, "No union descriptor, assuming single interface\n"); + combined_interfaces = 1; + control_interface = data_interface = intf; + goto look_for_collapsed_interface; + } else if (call_intf_num > 0) { dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); - /* quirks for Droids MuIn LCD */ - if (quirks & NO_DATA_INTERFACE) { - data_interface = usb_ifnum_to_if(usb_dev, 0); - } else { - data_intf_num = call_intf_num; - data_interface = usb_ifnum_to_if(usb_dev, data_intf_num); - } + data_intf_num = call_intf_num; + data_interface = usb_ifnum_to_if(usb_dev, data_intf_num); control_interface = intf; } else { - if (intf->cur_altsetting->desc.bNumEndpoints != 3) { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); - return -ENODEV; - } else { - dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n"); - combined_interfaces = 1; - control_interface = data_interface = intf; - goto look_for_collapsed_interface; - } + dev_dbg(&intf->dev, "No union descriptor, giving up\n"); + return -ENODEV; } } else { + int class = -1; + data_intf_num = union_header->bSlaveInterface0; control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, data_intf_num); + + if (control_interface) + class = control_interface->cur_altsetting->desc.bInterfaceClass; + + if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) { + dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n"); + combined_interfaces = 1; + control_interface = data_interface = intf; + goto look_for_collapsed_interface; + } } if (!control_interface || !data_interface) { dev_dbg(&intf->dev, "no interfaces\n"); return -ENODEV; } - if (!data_interface->cur_altsetting || !control_interface->cur_altsetting) - return -ENODEV; if (data_intf_num != call_intf_num) dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); @@ -1280,10 +1281,8 @@ look_for_collapsed_interface: skip_normal_probe: /*workaround for switched interfaces */ - if (data_interface->cur_altsetting->desc.bInterfaceClass - != CDC_DATA_INTERFACE_TYPE) { - if (control_interface->cur_altsetting->desc.bInterfaceClass - == CDC_DATA_INTERFACE_TYPE) { + if (data_interface->cur_altsetting->desc.bInterfaceClass != USB_CLASS_CDC_DATA) { + if (control_interface->cur_altsetting->desc.bInterfaceClass == USB_CLASS_CDC_DATA) { dev_dbg(&intf->dev, "Your device has switched interfaces.\n"); swap(control_interface, data_interface); @@ -1876,11 +1875,6 @@ static const struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ - /* Support for Droids MuIn LCD */ - { USB_DEVICE(0x04d8, 0x000b), - .driver_info = NO_DATA_INTERFACE, - }, - #if IS_ENABLED(CONFIG_INPUT_IMS_PCU) { USB_DEVICE(0x04d8, 0x0082), /* Application mode */ .driver_info = IGNORE_DEVICE, @@ -1906,6 +1900,17 @@ static const struct usb_device_id acm_ids[] = { .driver_info = IGNORE_DEVICE, }, + /* Exclude ETAS ES58x */ + { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */ + .driver_info = IGNORE_DEVICE, + }, + { USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */ .driver_info = SEND_ZERO_PACKET, }, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index cd5e9d8ab237..9dce179d031b 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -64,12 +64,12 @@ #define ACM_NR 16 struct acm_wb { - unsigned char *buf; + u8 *buf; dma_addr_t dmah; - int len; - int use; + unsigned int len; struct urb *urb; struct acm *instance; + bool use; }; struct acm_rb { @@ -131,15 +131,12 @@ struct acm { unsigned long quirks; }; -#define CDC_DATA_INTERFACE_TYPE 0x0a - /* constants describing various quirks and errors */ #define NO_UNION_NORMAL BIT(0) #define SINGLE_RX_URB BIT(1) #define NO_CAP_LINE BIT(2) -#define NO_DATA_INTERFACE BIT(4) -#define IGNORE_DEVICE BIT(5) -#define QUIRK_CONTROL_LINE_STATE BIT(6) -#define CLEAR_HALT_CONDITIONS BIT(7) -#define SEND_ZERO_PACKET BIT(8) -#define DISABLE_ECHO BIT(9) +#define IGNORE_DEVICE BIT(3) +#define QUIRK_CONTROL_LINE_STATE BIT(4) +#define CLEAR_HALT_CONDITIONS BIT(5) +#define SEND_ZERO_PACKET BIT(6) +#define DISABLE_ECHO BIT(7) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 7f5de956a2fc..02d0cfd23bb2 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -58,6 +58,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_MAX 16 +/* we cannot wait forever at flush() */ +#define WDM_FLUSH_TIMEOUT (30 * HZ) + /* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */ #define WDM_DEFAULT_BUFSIZE 256 @@ -151,7 +154,7 @@ static void wdm_out_callback(struct urb *urb) kfree(desc->outbuf); desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); - wake_up(&desc->wait); + wake_up_all(&desc->wait); } static void wdm_in_callback(struct urb *urb) @@ -393,6 +396,9 @@ static ssize_t wdm_write if (test_bit(WDM_RESETTING, &desc->flags)) r = -EIO; + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + r = -ENODEV; + if (r < 0) { rv = r; goto out_free_mem_pm; @@ -424,6 +430,7 @@ static ssize_t wdm_write if (rv < 0) { desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); + wake_up_all(&desc->wait); /* for wdm_wait_for_response() */ dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); rv = usb_translate_errors(rv); goto out_free_mem_pm; @@ -583,28 +590,58 @@ err: return rv; } -static int wdm_flush(struct file *file, fl_owner_t id) +static int wdm_wait_for_response(struct file *file, long timeout) { struct wdm_device *desc = file->private_data; + long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */ + + /* + * Needs both flags. We cannot do with one because resetting it would + * cause a race with write() yet we need to signal a disconnect. + */ + rv = wait_event_interruptible_timeout(desc->wait, + !test_bit(WDM_IN_USE, &desc->flags) || + test_bit(WDM_DISCONNECTING, &desc->flags), + timeout); - wait_event(desc->wait, - /* - * needs both flags. We cannot do with one - * because resetting it would cause a race - * with write() yet we need to signal - * a disconnect - */ - !test_bit(WDM_IN_USE, &desc->flags) || - test_bit(WDM_DISCONNECTING, &desc->flags)); - - /* cannot dereference desc->intf if WDM_DISCONNECTING */ + /* + * To report the correct error. This is best effort. + * We are inevitably racing with the hardware. + */ if (test_bit(WDM_DISCONNECTING, &desc->flags)) return -ENODEV; - if (desc->werr < 0) - dev_err(&desc->intf->dev, "Error in flush path: %d\n", - desc->werr); + if (!rv) + return -EIO; + if (rv < 0) + return -EINTR; + + spin_lock_irq(&desc->iuspin); + rv = desc->werr; + desc->werr = 0; + spin_unlock_irq(&desc->iuspin); + + return usb_translate_errors(rv); + +} + +/* + * You need to send a signal when you react to malicious or defective hardware. + * Also, don't abort when fsync() returned -EINVAL, for older kernels which do + * not implement wdm_flush() will return -EINVAL. + */ +static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync) +{ + return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT); +} - return usb_translate_errors(desc->werr); +/* + * Same with wdm_fsync(), except it uses finite timeout in order to react to + * malicious or defective hardware which ceased communication after close() was + * implicitly called due to process termination. + */ +static int wdm_flush(struct file *file, fl_owner_t id) +{ + return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT); } static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait) @@ -729,6 +766,7 @@ static const struct file_operations wdm_fops = { .owner = THIS_MODULE, .read = wdm_read, .write = wdm_write, + .fsync = wdm_fsync, .open = wdm_open, .flush = wdm_flush, .release = wdm_release, diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c index 7b3a21360d7c..6c4e3a19f42c 100644 --- a/drivers/usb/common/usb-conn-gpio.c +++ b/drivers/usb/common/usb-conn-gpio.c @@ -91,14 +91,14 @@ static void usb_conn_detect_cable(struct work_struct *work) return; } - if (info->last_role == USB_ROLE_HOST) + if (info->last_role == USB_ROLE_HOST && info->vbus) regulator_disable(info->vbus); ret = usb_role_switch_set_role(info->role_sw, role); if (ret) dev_err(info->dev, "failed to set role: %d\n", ret); - if (role == USB_ROLE_HOST) { + if (role == USB_ROLE_HOST && info->vbus) { ret = regulator_enable(info->vbus); if (ret) dev_err(info->dev, "enable vbus regulator failed\n"); @@ -106,8 +106,9 @@ static void usb_conn_detect_cable(struct work_struct *work) info->last_role = role; - dev_dbg(info->dev, "vbus regulator is %s\n", - regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); + if (info->vbus) + dev_dbg(info->dev, "vbus regulator is %s\n", + regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); power_supply_changed(info->charger); } @@ -156,6 +157,7 @@ static int usb_conn_probe(struct platform_device *pdev) struct power_supply_config cfg = { .of_node = dev->of_node, }; + bool need_vbus = true; int ret = 0; info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); @@ -185,10 +187,26 @@ static int usb_conn_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable); - info->vbus = devm_regulator_get(dev, "vbus"); + /* + * If the USB connector is a child of a USB port and that port already provides the VBUS + * supply, there's no need for the USB connector to provide it again. + */ + if (dev->parent && dev->parent->of_node) { + if (of_find_property(dev->parent->of_node, "vbus-supply", NULL)) + need_vbus = false; + } + + if (!need_vbus) { + info->vbus = devm_regulator_get_optional(dev, "vbus"); + if (PTR_ERR(info->vbus) == -ENODEV) + info->vbus = NULL; + } else { + info->vbus = devm_regulator_get(dev, "vbus"); + } + if (IS_ERR(info->vbus)) { if (PTR_ERR(info->vbus) != -EPROBE_DEFER) - dev_err(dev, "failed to get vbus\n"); + dev_err(dev, "failed to get vbus: %ld\n", PTR_ERR(info->vbus)); return PTR_ERR(info->vbus); } @@ -266,7 +284,7 @@ static int usb_conn_remove(struct platform_device *pdev) cancel_delayed_work_sync(&info->dw_det); - if (info->last_role == USB_ROLE_HOST) + if (info->last_role == USB_ROLE_HOST && info->vbus) regulator_disable(info->vbus); usb_role_switch_put(info->role_sw); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index dfacc478a8fc..351ede4b5de2 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -32,6 +32,20 @@ config USB_DEFAULT_PERSIST If you have any questions about this, say Y here, only say N if you know exactly what you are doing. +config USB_FEW_INIT_RETRIES + bool "Limit USB device initialization to only a few retries" + help + When a new USB device is detected, the kernel tries very hard + to initialize and enumerate it, with lots of nested retry loops. + This almost always works, but when it fails it can take a long time. + This option tells the kernel to make only a few retry attempts, + so that the total time required for a failed initialization is + no more than 30 seconds (as required by the USB OTG spec). + + Say N here unless you require new-device enumeration failure to + occur within 30 seconds (as might be needed in an embedded + application). + config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation" help diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 696b2b692b83..1ef2de6e375a 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -39,7 +39,6 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/gfp.h> -#include <linux/poll.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> @@ -97,22 +96,6 @@ static const char format_endpt[] = /* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; -/* - * Wait for an connect/disconnect event to happen. We initialize - * the event counter with an odd number, and each event will increment - * the event counter by two, so it will always _stay_ odd. That means - * that it will never be zero, so "event 0" will never match a current - * event, and thus 'poll' will always trigger as readable for the first - * time it gets called. - */ -static struct device_connect_event { - atomic_t count; - wait_queue_head_t wait; -} device_event = { - .count = ATOMIC_INIT(1), - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait) -}; - struct class_info { int class; char *class_name; @@ -146,12 +129,6 @@ static const struct class_info clas_info[] = { /*****************************************************************/ -void usbfs_conn_disc_event(void) -{ - atomic_add(2, &device_event.count); - wake_up(&device_event.wait); -} - static const char *class_decode(const int class) { int ix; @@ -623,25 +600,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, return total_written; } -/* Kernel lock for "lastev" protection */ -static __poll_t usb_device_poll(struct file *file, - struct poll_table_struct *wait) -{ - unsigned int event_count; - - poll_wait(file, &device_event.wait, wait); - - event_count = atomic_read(&device_event.count); - if (file->f_version != event_count) { - file->f_version = event_count; - return EPOLLIN | EPOLLRDNORM; - } - - return 0; -} - const struct file_operations usbfs_devices_fops = { .llseek = no_seek_end_llseek, .read = usb_device_read, - .poll = usb_device_poll, }; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index b351962279e4..98b7449c11f3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -991,8 +991,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver, bus_for_each_dev(&usb_bus_type, NULL, new_udriver, __usb_bus_reprobe_drivers); } else { - printk(KERN_ERR "%s: error %d registering device " - " driver %s\n", + pr_err("%s: error %d registering device driver %s\n", usbcore_name, retval, new_udriver->name); } @@ -1068,9 +1067,8 @@ out: out_newid: driver_unregister(&new_driver->drvwrap.driver); - printk(KERN_ERR "%s: error %d registering interface " - " driver %s\n", - usbcore_name, retval, new_driver->name); + pr_err("%s: error %d registering interface driver %s\n", + usbcore_name, retval, new_driver->name); goto out; } EXPORT_SYMBOL_GPL(usb_register_driver); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 2b2f1ab6e36a..22c887f5c497 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -195,7 +195,7 @@ int usb_choose_configuration(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_choose_configuration); -static int __check_usb_generic(struct device_driver *drv, void *data) +static int __check_for_non_generic_match(struct device_driver *drv, void *data) { struct usb_device *udev = data; struct usb_device_driver *udrv; @@ -219,7 +219,7 @@ static bool usb_generic_driver_match(struct usb_device *udev) * If any other driver wants the device, leave the device to this other * driver. */ - if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_usb_generic)) + if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match)) return false; return true; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index a33b849e8beb..2c6b9578a7d3 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1657,9 +1657,9 @@ static void __usb_hcd_giveback_urb(struct urb *urb) usb_put_urb(urb); } -static void usb_giveback_urb_bh(unsigned long param) +static void usb_giveback_urb_bh(struct tasklet_struct *t) { - struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param; + struct giveback_urb_bh *bh = from_tasklet(bh, t, bh); struct list_head local_list; spin_lock_irq(&bh->lock); @@ -2403,7 +2403,7 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh) spin_lock_init(&bh->lock); INIT_LIST_HEAD(&bh->head); - tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh); + tasklet_setup(&bh->bh, usb_giveback_urb_bh); } struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5b768b80d1ee..17202b2ee063 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2705,11 +2705,20 @@ static unsigned hub_is_wusb(struct usb_hub *hub) } +#ifdef CONFIG_USB_FEW_INIT_RETRIES +#define PORT_RESET_TRIES 2 +#define SET_ADDRESS_TRIES 1 +#define GET_DESCRIPTOR_TRIES 1 +#define GET_MAXPACKET0_TRIES 1 +#define PORT_INIT_TRIES 4 + +#else #define PORT_RESET_TRIES 5 #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 -#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme)) +#define GET_MAXPACKET0_TRIES 3 +#define PORT_INIT_TRIES 4 +#endif /* CONFIG_USB_FEW_INIT_RETRIES */ #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2717,23 +2726,31 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_LONG_RESET_TIME 200 #define HUB_RESET_TIMEOUT 800 -/* - * "New scheme" enumeration causes an extra state transition to be - * exposed to an xhci host and causes USB3 devices to receive control - * commands in the default state. This has been seen to cause - * enumeration failures, so disable this enumeration scheme for USB3 - * devices. - */ static bool use_new_scheme(struct usb_device *udev, int retry, struct usb_port *port_dev) { int old_scheme_first_port = - port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + (port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) || + old_scheme_first; + /* + * "New scheme" enumeration causes an extra state transition to be + * exposed to an xhci host and causes USB3 devices to receive control + * commands in the default state. This has been seen to cause + * enumeration failures, so disable this enumeration scheme for USB3 + * devices. + */ if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); + /* + * If use_both_schemes is set, use the first scheme (whichever + * it is) for the larger half of the retries, then use the other + * scheme. Otherwise, use the first scheme for all the retries. + */ + if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2) + return old_scheme_first_port; /* Second half */ + return !old_scheme_first_port; /* First half or all */ } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -4545,6 +4562,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, const char *speed; int devnum = udev->devnum; const char *driver_name; + bool do_new_scheme; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -4657,14 +4675,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { - bool did_new_scheme = false; + do_new_scheme = use_new_scheme(udev, retry_counter, port_dev); - if (use_new_scheme(udev, retry_counter, port_dev)) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { + if (do_new_scheme) { struct usb_device_descriptor *buf; int r = 0; - did_new_scheme = true; retval = hub_enable_device(udev); if (retval < 0) { dev_err(&udev->dev, @@ -4684,7 +4701,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (operations = 0; operations < 3; ++operations) { + for (operations = 0; operations < GET_MAXPACKET0_TRIES; + ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4773,11 +4791,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * - read ep0 maxpacket even for high and low speed, */ msleep(10); - /* use_new_scheme() checks the speed which may have - * changed since the initial look so we cache the result - * in did_new_scheme - */ - if (did_new_scheme) + if (do_new_scheme) break; } @@ -5106,7 +5120,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, unit_load = 100; status = 0; - for (i = 0; i < SET_CONFIG_TRIES; i++) { + for (i = 0; i < PORT_INIT_TRIES; i++) { /* reallocate for each attempt, since references * to the previous one can escape in various ways @@ -5239,7 +5253,7 @@ loop: break; /* When halfway through our retry count, power-cycle the port */ - if (i == (SET_CONFIG_TRIES / 2) - 1) { + if (i == (PORT_INIT_TRIES - 1) / 2) { dev_info(&port_dev->dev, "attempt power cycle\n"); usb_hub_set_port_power(hdev, hub, port1, false); msleep(2 * hub_power_on_good_delay(hub)); @@ -5770,7 +5784,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; - for (i = 0; i < SET_CONFIG_TRIES; ++i) { + for (i = 0; i < PORT_INIT_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. * Other endpoints will be handled by re-enumeration. */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index ae1de9cc4b09..f4107b9e8c38 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -163,6 +163,143 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, EXPORT_SYMBOL_GPL(usb_control_msg); /** + * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is not + * expected to fill in a response (i.e. a "send message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else, + * as it will not be modified at all. This does not have the restriction that + * usb_control_msg() has where the data pointer must be to dynamically allocated + * memory (i.e. memory that can be successfully DMAed to a device). + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_sndctrlpipe(dev, endpoint); + int ret; + u8 *data = NULL; + + if (usb_pipe_type_check(dev, pipe)) + return -EINVAL; + + if (size) { + data = kmemdup(driver_data, size, memflags); + if (!data) + return -ENOMEM; + } + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + kfree(data); + + if (ret < 0) + return ret; + if (ret == size) + return 0; + return -EINVAL; +} +EXPORT_SYMBOL_GPL(usb_control_msg_send); + +/** + * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to be filled in by the message + * @size: length in bytes of the data to be received + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is + * expected to fill in a response (i.e. a "receive message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else + * that can be successfully written to. This function does not have the + * restriction that usb_control_msg() has where the data pointer must be to + * dynamically allocated memory (i.e. memory that can be successfully DMAed to a + * device). + * + * The "whole" message must be properly received from the device in order for + * this function to be successful. If a device returns less than the expected + * amount of data, then the function will fail. Do not use this for messages + * where a variable amount of data might be returned. + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); + int ret; + u8 *data; + + if (!size || !driver_data || usb_pipe_type_check(dev, pipe)) + return -EINVAL; + + data = kmalloc(size, memflags); + if (!data) + return -ENOMEM; + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + + if (ret < 0) + goto exit; + + if (ret == size) { + memcpy(driver_data, data, size); + ret = 0; + } else { + ret = -EINVAL; + } + +exit: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg_recv); + +/** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to @@ -948,11 +1085,12 @@ int usb_set_isoch_delay(struct usb_device *dev) if (dev->speed < USB_SPEED_SUPER) return 0; - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + return usb_control_msg_send(dev, 0, USB_REQ_SET_ISOCH_DELAY, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, dev->hub_delay, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); + USB_CTRL_SET_TIMEOUT, + GFP_NOIO); } /** @@ -1070,13 +1208,13 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * (like some ibmcam model 1 units) seem to expect hosts to make * this request for iso endpoints, which can't halt! */ - result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, endp, NULL, 0, - USB_CTRL_SET_TIMEOUT); + result = usb_control_msg_send(dev, 0, + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, endp, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); /* don't un-halt or force to DATA0 except on success */ - if (result < 0) + if (result) return result; /* NOTE: seems like Microsoft and Apple don't bother verifying @@ -1438,9 +1576,11 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) if (dev->quirks & USB_QUIRK_NO_SET_INTF) ret = -EPIPE; else - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, - alternate, interface, NULL, 0, 5000); + ret = usb_control_msg_send(dev, 0, + USB_REQ_SET_INTERFACE, + USB_RECIP_INTERFACE, alternate, + interface, NULL, 0, 5000, + GFP_NOIO); /* 9.4.10 says devices don't need this and are free to STALL the * request if the interface only has one alternate setting. @@ -1450,7 +1590,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) "manual set_interface for iface %d, alt %d\n", interface, alternate); manual = 1; - } else if (ret < 0) { + } else if (ret) { /* Re-instate the old alt setting */ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); usb_enable_lpm(dev); @@ -1574,11 +1714,11 @@ int usb_reset_configuration(struct usb_device *dev) mutex_unlock(hcd->bandwidth_mutex); return retval; } - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_CONFIGURATION, 0, - config->desc.bConfigurationValue, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) { + retval = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + config->desc.bConfigurationValue, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT, + GFP_NOIO); + if (retval) { usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); @@ -1963,10 +2103,10 @@ free_interfaces: } kfree(new_interfaces); - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_CONFIGURATION, 0, configuration, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret < 0 && cp) { + ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0, + configuration, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT, GFP_NOIO); + if (ret && cp) { /* * All the old state is gone, so what else can we do? * The device is probably useless now anyway. diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7bc23469f4e4..357b149b20d3 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -192,24 +192,39 @@ static const int pipetypes[4] = { }; /** - * usb_urb_ep_type_check - sanity check of endpoint in the given urb - * @urb: urb to be checked + * usb_pipe_type_check - sanity check of a specific pipe for a usb device + * @dev: struct usb_device to be checked + * @pipe: pipe to check * * This performs a light-weight sanity check for the endpoint in the - * given urb. It returns 0 if the urb contains a valid endpoint, otherwise - * a negative error code. + * given usb device. It returns 0 if the pipe is valid for the specific usb + * device, otherwise a negative error code. */ -int usb_urb_ep_type_check(const struct urb *urb) +int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe) { const struct usb_host_endpoint *ep; - ep = usb_pipe_endpoint(urb->dev, urb->pipe); + ep = usb_pipe_endpoint(dev, pipe); if (!ep) return -EINVAL; - if (usb_pipetype(urb->pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) + if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) return -EINVAL; return 0; } +EXPORT_SYMBOL_GPL(usb_pipe_type_check); + +/** + * usb_urb_ep_type_check - sanity check of endpoint in the given urb + * @urb: urb to be checked + * + * This performs a light-weight sanity check for the endpoint in the + * given urb. It returns 0 if the urb contains a valid endpoint, otherwise + * a negative error code. + */ +int usb_urb_ep_type_check(const struct urb *urb) +{ + return usb_pipe_type_check(urb->dev, urb->pipe); +} EXPORT_SYMBOL_GPL(usb_urb_ep_type_check); /** @@ -474,7 +489,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) */ /* Check that the pipe's type matches the endpoint's type */ - if (usb_urb_ep_type_check(urb)) + if (usb_pipe_type_check(urb->dev, urb->pipe)) dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", usb_pipetype(urb->pipe), pipetypes[xfertype]); @@ -772,11 +787,12 @@ void usb_block_urb(struct urb *urb) EXPORT_SYMBOL_GPL(usb_block_urb); /** - * usb_kill_anchored_urbs - cancel transfer requests en masse + * usb_kill_anchored_urbs - kill all URBs associated with an anchor * @anchor: anchor the requests are bound to * - * this allows all outstanding URBs to be killed starting - * from the back of the queue + * This kills all outstanding URBs starting from the back of the queue, + * with guarantee that no completer callbacks will take place from the + * anchor after this function returns. * * This routine should not be called by a driver after its disconnect * method has returned. @@ -784,20 +800,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb); void usb_kill_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty; - spin_lock_irq(&anchor->lock); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_kill_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_kill_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); @@ -816,21 +838,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); void usb_poison_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty; - spin_lock_irq(&anchor->lock); - anchor->poisoned = 1; - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_poison_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + anchor->poisoned = 1; + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_poison_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); @@ -970,14 +998,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; unsigned long flags; + int surely_empty; + + do { + spin_lock_irqsave(&anchor->lock, flags); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + __usb_unanchor_urb(victim, anchor); + } + surely_empty = usb_anchor_check_wakeup(anchor); - spin_lock_irqsave(&anchor->lock, flags); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - __usb_unanchor_urb(victim, anchor); - } - spin_unlock_irqrestore(&anchor->lock, flags); + spin_unlock_irqrestore(&anchor->lock, flags); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 98e7d1ee63dc..c893f54a3420 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -191,7 +191,6 @@ extern const struct attribute_group *usb_interface_groups[]; extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; -extern void usbfs_conn_disc_event(void); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index 16e1aa304edc..c131719367ec 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -5,6 +5,7 @@ config USB_DWC2 depends on HAS_DMA depends on USB || USB_GADGET depends on HAS_IOMEM + select USB_ROLE_SWITCH help Say Y here if your system has a Dual Role Hi-Speed USB controller based on the DesignWare HSOTG IP Core. diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 440320cc20a4..2bcd6945df46 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -3,7 +3,7 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG obj-$(CONFIG_USB_DWC2) += dwc2.o -dwc2-y := core.o core_intr.o platform.o +dwc2-y := core.o core_intr.o platform.o drd.o dwc2-y += params.o ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 9deff0400a92..7161344c6522 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -860,6 +860,7 @@ struct dwc2_hregs_backup { * - USB_DR_MODE_PERIPHERAL * - USB_DR_MODE_HOST * - USB_DR_MODE_OTG + * @role_sw: usb_role_switch handle * @hcd_enabled: Host mode sub-driver initialization indicator. * @gadget_enabled: Peripheral mode sub-driver initialization indicator. * @ll_hw_enabled: Status of low-level hardware resources. @@ -1054,6 +1055,7 @@ struct dwc2_hsotg { struct dwc2_core_params params; enum usb_otg_state op_state; enum usb_dr_mode dr_mode; + struct usb_role_switch *role_sw; unsigned int hcd_enabled:1; unsigned int gadget_enabled:1; unsigned int ll_hw_enabled:1; @@ -1376,6 +1378,11 @@ static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg) return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0; } +int dwc2_drd_init(struct dwc2_hsotg *hsotg); +void dwc2_drd_suspend(struct dwc2_hsotg *hsotg); +void dwc2_drd_resume(struct dwc2_hsotg *hsotg); +void dwc2_drd_exit(struct dwc2_hsotg *hsotg); + /* * Dump core registers and SPRAM */ @@ -1392,6 +1399,7 @@ int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2); int dwc2_gadget_init(struct dwc2_hsotg *hsotg); void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, bool reset); +void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg); void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg); void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2); int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode); @@ -1417,6 +1425,7 @@ static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg) { return 0; } static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, bool reset) {} +static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {} static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c new file mode 100644 index 000000000000..2d4176f5788e --- /dev/null +++ b/drivers/usb/dwc2/drd.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drd.c - DesignWare USB2 DRD Controller Dual-role support + * + * Copyright (C) 2020 STMicroelectronics + * + * Author(s): Amelie Delaunay <amelie.delaunay@st.com> + */ + +#include <linux/iopoll.h> +#include <linux/platform_device.h> +#include <linux/usb/role.h> +#include "core.h" + +static void dwc2_ovr_init(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + u32 gotgctl; + + spin_lock_irqsave(&hsotg->lock, flags); + + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN; + gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS; + gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + dwc2_force_mode(hsotg, false); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid) +{ + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + + /* Check if A-Session is already in the right state */ + if ((valid && (gotgctl & GOTGCTL_ASESVLD)) || + (!valid && !(gotgctl & GOTGCTL_ASESVLD))) + return -EALREADY; + + if (valid) + gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL; + else + gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + return 0; +} + +static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid) +{ + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + + /* Check if B-Session is already in the right state */ + if ((valid && (gotgctl & GOTGCTL_BSESVLD)) || + (!valid && !(gotgctl & GOTGCTL_BSESVLD))) + return -EALREADY; + + if (valid) + gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL; + else + gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + return 0; +} + +static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) +{ + struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw); + unsigned long flags; + int already = 0; + + /* Skip session not in line with dr_mode */ + if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) || + (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) + return -EINVAL; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Skip session if core is in test mode */ + if (role == USB_ROLE_NONE && hsotg->test_mode) { + dev_dbg(hsotg->dev, "Core is in test mode\n"); + return -EBUSY; + } +#endif + + spin_lock_irqsave(&hsotg->lock, flags); + + if (role == USB_ROLE_HOST) { + already = dwc2_ovr_avalid(hsotg, true); + } else if (role == USB_ROLE_DEVICE) { + already = dwc2_ovr_bvalid(hsotg, true); + /* This clear DCTL.SFTDISCON bit */ + dwc2_hsotg_core_connect(hsotg); + } else { + if (dwc2_is_device_mode(hsotg)) { + if (!dwc2_ovr_bvalid(hsotg, false)) + /* This set DCTL.SFTDISCON bit */ + dwc2_hsotg_core_disconnect(hsotg); + } else { + dwc2_ovr_avalid(hsotg, false); + } + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (!already && hsotg->dr_mode == USB_DR_MODE_OTG) + /* This will raise a Connector ID Status Change Interrupt */ + dwc2_force_mode(hsotg, role == USB_ROLE_HOST); + + dev_dbg(hsotg->dev, "%s-session valid\n", + role == USB_ROLE_NONE ? "No" : + role == USB_ROLE_HOST ? "A" : "B"); + + return 0; +} + +int dwc2_drd_init(struct dwc2_hsotg *hsotg) +{ + struct usb_role_switch_desc role_sw_desc = {0}; + struct usb_role_switch *role_sw; + int ret; + + if (!device_property_read_bool(hsotg->dev, "usb-role-switch")) + return 0; + + role_sw_desc.driver_data = hsotg; + role_sw_desc.fwnode = dev_fwnode(hsotg->dev); + role_sw_desc.set = dwc2_drd_role_sw_set; + role_sw_desc.allow_userspace_control = true; + + role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc); + if (IS_ERR(role_sw)) { + ret = PTR_ERR(role_sw); + dev_err(hsotg->dev, + "failed to register role switch: %d\n", ret); + return ret; + } + + hsotg->role_sw = role_sw; + + /* Enable override and initialize values */ + dwc2_ovr_init(hsotg); + + return 0; +} + +void dwc2_drd_suspend(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, gintmsk; + + if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_CONIDSTSCHNG; + dwc2_writel(hsotg, gintmsk, GINTMSK); + gintsts = dwc2_readl(hsotg, GINTSTS); + dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); + } +} + +void dwc2_drd_resume(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, gintmsk; + + if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { + gintsts = dwc2_readl(hsotg, GINTSTS); + dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_CONIDSTSCHNG; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } +} + +void dwc2_drd_exit(struct dwc2_hsotg *hsotg) +{ + if (hsotg->role_sw) + usb_role_switch_unregister(hsotg->role_sw); +} diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 5b9d23991c99..0a0d11151cfb 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -713,8 +713,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg) */ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep) { + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; int is_isoc = hs_ep->isochronous; unsigned int maxsize; + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; if (is_isoc) maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT : @@ -723,6 +726,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep) else maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC; + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) + maxsize = mps * MAX_DMA_DESC_NUM_GENERIC; + return maxsize; } @@ -738,11 +746,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep) * Isochronous - descriptor rx/tx bytes bitfield limit, * Control In/Bulk/Interrupt - multiple of mps. This will allow to not * have concatenations from various descriptors within one packet. + * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds + * to a single descriptor. * * Selects corresponding mask for RX/TX bytes as well. */ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask) { + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; u32 mps = hs_ep->ep.maxpacket; int dir_in = hs_ep->dir_in; u32 desc_size = 0; @@ -766,6 +777,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask) desc_size -= desc_size % mps; } + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) { + desc_size = mps; + *mask = DEV_DMA_NBYTES_MASK; + } + return desc_size; } @@ -1123,13 +1141,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, length += (mps - (length % mps)); } - /* - * If more data to send, adjust DMA for EP0 out data stage. - * ureq->dma stays unchanged, hence increment it by already - * passed passed data count before starting new transaction. - */ - if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT && - continuing) + if (continuing) offset = ureq->actual; /* Fill DDMA chain entries */ @@ -2320,22 +2332,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, */ static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep) { + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; struct dwc2_hsotg *hsotg = hs_ep->parent; unsigned int bytes_rem = 0; + unsigned int bytes_rem_correction = 0; struct dwc2_dma_desc *desc = hs_ep->desc_list; int i; u32 status; + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; if (!desc) return -EINVAL; + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) + bytes_rem_correction = 4 - (mps % 4); + for (i = 0; i < hs_ep->desc_count; ++i) { status = desc->status; bytes_rem += status & DEV_DMA_NBYTES_MASK; + bytes_rem -= bytes_rem_correction; if (status & DEV_DMA_STS_MASK) dev_err(hsotg->dev, "descriptor %d closed with %x\n", i, status & DEV_DMA_STS_MASK); + + if (status & DEV_DMA_L) + break; + desc++; } @@ -3530,7 +3556,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, dwc2_readl(hsotg, DOEPCTL0)); } -static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) +void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) { /* set the soft-disconnect bit */ dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 8f9d061c4d5f..267543c3dc38 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -185,7 +185,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) struct dwc2_core_params *p = &hsotg->params; p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; - p->activate_stm_id_vb_detection = true; + p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch"); p->host_rx_fifo_size = 440; p->host_nperio_tx_fifo_size = 256; p->host_perio_tx_fifo_size = 256; @@ -210,6 +210,7 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "amlogic,meson-g12a-usb", .data = dwc2_set_amlogic_g12a_params }, { .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params }, + { .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params }, { .compatible = "st,stm32f4x9-fsotg", .data = dwc2_set_stm32f4x9_fsotg_params }, { .compatible = "st,stm32f4x9-hsotg" }, @@ -860,7 +861,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) int dwc2_init_params(struct dwc2_hsotg *hsotg) { const struct of_device_id *match; - void (*set_params)(void *data); + void (*set_params)(struct dwc2_hsotg *data); dwc2_set_default_params(hsotg); dwc2_get_device_properties(hsotg); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index db9fd4bd1a38..e2820676beb1 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -121,6 +121,13 @@ static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) return 0; } +static void __dwc2_disable_regulators(void *data) +{ + struct dwc2_hsotg *hsotg = data; + + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); +} + static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) { struct platform_device *pdev = to_platform_device(hsotg->dev); @@ -131,6 +138,11 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) if (ret) return ret; + ret = devm_add_action_or_reset(&pdev->dev, + __dwc2_disable_regulators, hsotg); + if (ret) + return ret; + if (hsotg->clk) { ret = clk_prepare_enable(hsotg->clk); if (ret) @@ -186,10 +198,7 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) if (hsotg->clk) clk_disable_unprepare(hsotg->clk); - ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - - return ret; + return 0; } /** @@ -314,6 +323,8 @@ static int dwc2_driver_remove(struct platform_device *dev) if (hsotg->gadget_enabled) dwc2_hsotg_remove(hsotg); + dwc2_drd_exit(hsotg); + if (hsotg->params.activate_stm_id_vb_detection) regulator_disable(hsotg->usb33d); @@ -533,10 +544,17 @@ static int dwc2_driver_probe(struct platform_device *dev) dwc2_writel(hsotg, ggpio, GGPIO); } + retval = dwc2_drd_init(hsotg); + if (retval) { + if (retval != -EPROBE_DEFER) + dev_err(hsotg->dev, "failed to initialize dual-role\n"); + goto error_init; + } + if (hsotg->dr_mode != USB_DR_MODE_HOST) { retval = dwc2_gadget_init(hsotg); if (retval) - goto error_init; + goto error_drd; hsotg->gadget_enabled = 1; } @@ -562,7 +580,7 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) { if (hsotg->gadget_enabled) dwc2_hsotg_remove(hsotg); - goto error_init; + goto error_drd; } hsotg->hcd_enabled = 1; } @@ -584,12 +602,19 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) { hsotg->gadget.udc = NULL; dwc2_hsotg_remove(hsotg); - goto error_init; + goto error_debugfs; } } #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ return 0; +error_debugfs: + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); +error_drd: + dwc2_drd_exit(hsotg); + error_init: if (hsotg->params.activate_stm_id_vb_detection) regulator_disable(hsotg->usb33d); @@ -608,6 +633,8 @@ static int __maybe_unused dwc2_suspend(struct device *dev) if (is_device_mode) dwc2_hsotg_suspend(dwc2); + dwc2_drd_suspend(dwc2); + if (dwc2->params.activate_stm_id_vb_detection) { unsigned long flags; u32 ggpio, gotgctl; @@ -688,6 +715,8 @@ static int __maybe_unused dwc2_resume(struct device *dev) /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */ dwc2_force_dr_mode(dwc2); + dwc2_drd_resume(dwc2); + if (dwc2_is_device_mode(dwc2)) ret = dwc2_hsotg_resume(dwc2); diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2eb34c8b4065..bdf0925da6b6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -119,9 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work) struct dwc3 *dwc = work_to_dwc(work); unsigned long flags; int ret; - - if (dwc->dr_mode != USB_DR_MODE_OTG) - return; + u32 reg; pm_runtime_get_sync(dwc->dev); @@ -172,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work) otg_set_vbus(dwc->usb2_phy->otg, true); phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + if (dwc->dis_split_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_SPLITDISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } } break; case DWC3_GCTL_PRTCAP_DEVICE: @@ -203,6 +206,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { unsigned long flags; + if (dwc->dr_mode != USB_DR_MODE_OTG) + return; + spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; spin_unlock_irqrestore(&dwc->lock, flags); @@ -929,13 +935,6 @@ static int dwc3_core_init(struct dwc3 *dwc) */ dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); - /* Handle USB2.0-only core configuration */ - if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == - DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { - if (dwc->maximum_speed == USB_SPEED_SUPER) - dwc->maximum_speed = USB_SPEED_HIGH; - } - ret = dwc3_phy_setup(dwc); if (ret) goto err0; @@ -1356,6 +1355,9 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->dis_metastability_quirk = device_property_read_bool(dev, "snps,dis_metastability_quirk"); + dwc->dis_split_quirk = device_property_read_bool(dev, + "snps,dis-split-quirk"); + dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; @@ -1381,6 +1383,8 @@ bool dwc3_has_imod(struct dwc3 *dwc) static void dwc3_check_params(struct dwc3 *dwc) { struct device *dev = dwc->dev; + unsigned int hwparam_gen = + DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3); /* Check for proper value of imod_interval */ if (dwc->imod_interval && !dwc3_has_imod(dwc)) { @@ -1404,25 +1408,40 @@ static void dwc3_check_params(struct dwc3 *dwc) case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: + break; case USB_SPEED_SUPER: + if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) + dev_warn(dev, "UDC doesn't support Gen 1\n"); + break; case USB_SPEED_SUPER_PLUS: + if ((DWC3_IP_IS(DWC32) && + hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) || + (!DWC3_IP_IS(DWC32) && + hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + dev_warn(dev, "UDC doesn't support SSP\n"); break; default: dev_err(dev, "invalid maximum_speed parameter %d\n", dwc->maximum_speed); fallthrough; case USB_SPEED_UNKNOWN: - /* default to superspeed */ - dwc->maximum_speed = USB_SPEED_SUPER; - - /* - * default to superspeed plus if we are capable. - */ - if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) && - (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == - DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + switch (hwparam_gen) { + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2: dwc->maximum_speed = USB_SPEED_SUPER_PLUS; - + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1: + if (DWC3_IP_IS(DWC32)) + dwc->maximum_speed = USB_SPEED_SUPER_PLUS; + else + dwc->maximum_speed = USB_SPEED_SUPER; + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_DIS: + dwc->maximum_speed = USB_SPEED_HIGH; + break; + default: + dwc->maximum_speed = USB_SPEED_SUPER; + break; + } break; } } @@ -1554,6 +1573,17 @@ static int dwc3_probe(struct platform_device *pdev) err5: dwc3_event_buffers_cleanup(dwc); + + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); + dwc3_ulpi_exit(dwc); err4: @@ -1589,9 +1619,9 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_core_exit(dwc); dwc3_ulpi_exit(dwc); - pm_runtime_put_sync(&pdev->dev); - pm_runtime_allow(&pdev->dev); pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); @@ -1865,10 +1895,26 @@ static int dwc3_resume(struct device *dev) return 0; } + +static void dwc3_complete(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + u32 reg; + + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST && + dwc->dis_split_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); + reg |= DWC3_GUCTL3_SPLITDISABLE; + dwc3_writel(dwc->regs, DWC3_GUCTL3, reg); + } +} +#else +#define dwc3_complete NULL #endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops dwc3_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) + .complete = dwc3_complete, SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume, dwc3_runtime_idle) }; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2f04b3e42bf1..74323b10a64a 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -138,6 +138,7 @@ #define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10)) #define DWC3_GHWPARAMS8 0xc600 +#define DWC3_GUCTL3 0xc60c #define DWC3_GFLADJ 0xc630 /* Device Registers */ @@ -380,6 +381,9 @@ /* Global User Control Register 2 */ #define DWC3_GUCTL2_RST_ACTBITLATER BIT(14) +/* Global User Control Register 3 */ +#define DWC3_GUCTL3_SPLITDISABLE BIT(14) + /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -634,7 +638,7 @@ struct dwc3_trb; struct dwc3_event_buffer { void *buf; void *cache; - unsigned length; + unsigned int length; unsigned int lpos; unsigned int count; unsigned int flags; @@ -694,7 +698,7 @@ struct dwc3_ep { struct dwc3 *dwc; u32 saved_state; - unsigned flags; + unsigned int flags; #define DWC3_EP_ENABLED BIT(0) #define DWC3_EP_STALL BIT(1) #define DWC3_EP_WEDGE BIT(2) @@ -706,6 +710,7 @@ struct dwc3_ep { #define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8) #define DWC3_EP_FORCE_RESTART_STREAM BIT(9) #define DWC3_EP_FIRST_STREAM_PRIMED BIT(10) +#define DWC3_EP_PENDING_CLEAR_STALL BIT(11) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) @@ -893,9 +898,9 @@ struct dwc3_request { struct scatterlist *sg; struct scatterlist *start_sg; - unsigned num_pending_sgs; + unsigned int num_pending_sgs; unsigned int num_queued_sgs; - unsigned remaining; + unsigned int remaining; unsigned int status; #define DWC3_REQUEST_STATUS_QUEUED 0 @@ -908,11 +913,11 @@ struct dwc3_request { struct dwc3_trb *trb; dma_addr_t trb_dma; - unsigned num_trbs; + unsigned int num_trbs; - unsigned needs_extra_trb:1; - unsigned direction:1; - unsigned mapped:1; + unsigned int needs_extra_trb:1; + unsigned int direction:1; + unsigned int mapped:1; }; /* @@ -1010,8 +1015,8 @@ struct dwc3_scratchpad_array { * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. * @is_utmi_l1_suspend: the core asserts output signal - * 0 - utmi_sleep_n - * 1 - utmi_l1_suspend_n + * 0 - utmi_sleep_n + * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board * @pending_events: true when we have pending IRQs to be handled * @pullups_connected: true when Run/Stop bit is set @@ -1047,13 +1052,14 @@ struct dwc3_scratchpad_array { * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value - * 0 - -6dB de-emphasis - * 1 - -3.5dB de-emphasis - * 2 - No de-emphasis - * 3 - Reserved + * 0 - -6dB de-emphasis + * 1 - -3.5dB de-emphasis + * 2 - No de-emphasis + * 3 - Reserved * @dis_metastability_quirk: set to disable metastability quirk. + * @dis_split_quirk: set to disable split boundary. * @imod_interval: set the interrupt moderation interval in 250ns - * increments or 0 to disable. + * increments or 0 to disable. */ struct dwc3 { struct work_struct drd_work; @@ -1079,7 +1085,7 @@ struct dwc3 { struct dwc3_event_buffer *ev_buf; struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; - struct usb_gadget gadget; + struct usb_gadget *gadget; struct usb_gadget_driver *gadget_driver; struct clk_bulk_data *clks; @@ -1245,6 +1251,8 @@ struct dwc3 { unsigned dis_metastability_quirk:1; + unsigned dis_split_quirk:1; + u16 imod_interval; }; @@ -1456,9 +1464,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc); int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); int dwc3_gadget_get_link_state(struct dwc3 *dwc); int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); -int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, +int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params); -int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param); +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, + u32 param); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } @@ -1472,7 +1481,7 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) { return 0; } -static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, +static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params) { return 0; } static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 3d16dac4e5cc..8ab394942360 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -371,7 +371,9 @@ static inline const char *dwc3_gadget_event_type_string(u8 event) static inline const char *dwc3_decode_event(char *str, size_t size, u32 event, u32 ep0state) { - const union dwc3_event evt = (union dwc3_event) event; + union dwc3_event evt; + + memcpy(&evt, &event, sizeof(event)); if (evt.type.is_devspec) return dwc3_gadget_event_string(str, size, &evt.devt); @@ -411,8 +413,8 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status) #ifdef CONFIG_DEBUG_FS -extern void dwc3_debugfs_init(struct dwc3 *); -extern void dwc3_debugfs_exit(struct dwc3 *); +extern void dwc3_debugfs_init(struct dwc3 *d); +extern void dwc3_debugfs_exit(struct dwc3 *d); #else static inline void dwc3_debugfs_init(struct dwc3 *d) { } diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 2c7b6dd79cdf..5da4f6082d93 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -397,13 +397,13 @@ static int dwc3_mode_show(struct seq_file *s, void *unused) switch (DWC3_GCTL_PRTCAP(reg)) { case DWC3_GCTL_PRTCAP_HOST: - seq_printf(s, "host\n"); + seq_puts(s, "host\n"); break; case DWC3_GCTL_PRTCAP_DEVICE: - seq_printf(s, "device\n"); + seq_puts(s, "device\n"); break; case DWC3_GCTL_PRTCAP_OTG: - seq_printf(s, "otg\n"); + seq_puts(s, "otg\n"); break; default: seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg)); @@ -428,6 +428,9 @@ static ssize_t dwc3_mode_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; + if (dwc->dr_mode != USB_DR_MODE_OTG) + return count; + if (!strncmp(buf, "host", 4)) mode = DWC3_GCTL_PRTCAP_HOST; @@ -464,22 +467,22 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused) switch (reg) { case 0: - seq_printf(s, "no test\n"); + seq_puts(s, "no test\n"); break; case USB_TEST_J: - seq_printf(s, "test_j\n"); + seq_puts(s, "test_j\n"); break; case USB_TEST_K: - seq_printf(s, "test_k\n"); + seq_puts(s, "test_k\n"); break; case USB_TEST_SE0_NAK: - seq_printf(s, "test_se0_nak\n"); + seq_puts(s, "test_se0_nak\n"); break; case USB_TEST_PACKET: - seq_printf(s, "test_packet\n"); + seq_puts(s, "test_packet\n"); break; case USB_TEST_FORCE_ENABLE: - seq_printf(s, "test_force_enable\n"); + seq_puts(s, "test_force_enable\n"); break; default: seq_printf(s, "UNKNOWN %d\n", reg); @@ -760,27 +763,26 @@ static int dwc3_transfer_type_show(struct seq_file *s, void *unused) unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); - if (!(dep->flags & DWC3_EP_ENABLED) || - !dep->endpoint.desc) { - seq_printf(s, "--\n"); + if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) { + seq_puts(s, "--\n"); goto out; } switch (usb_endpoint_type(dep->endpoint.desc)) { case USB_ENDPOINT_XFER_CONTROL: - seq_printf(s, "control\n"); + seq_puts(s, "control\n"); break; case USB_ENDPOINT_XFER_ISOC: - seq_printf(s, "isochronous\n"); + seq_puts(s, "isochronous\n"); break; case USB_ENDPOINT_XFER_BULK: - seq_printf(s, "bulk\n"); + seq_puts(s, "bulk\n"); break; case USB_ENDPOINT_XFER_INT: - seq_printf(s, "interrupt\n"); + seq_puts(s, "interrupt\n"); break; default: - seq_printf(s, "--\n"); + seq_puts(s, "--\n"); } out: @@ -798,11 +800,11 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused) spin_lock_irqsave(&dwc->lock, flags); if (dep->number <= 1) { - seq_printf(s, "--\n"); + seq_puts(s, "--\n"); goto out; } - seq_printf(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n"); + seq_puts(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n"); for (i = 0; i < DWC3_TRB_NUM; i++) { struct dwc3_trb *trb = &dep->trb_pool[i]; @@ -884,7 +886,7 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, const struct file_operations *fops = dwc3_ep_file_map[i].fops; const char *name = dwc3_ep_file_map[i].name; - debugfs_create_file(name, S_IRUGO, parent, dep, fops); + debugfs_create_file(name, 0444, parent, dep, fops); } } @@ -929,21 +931,18 @@ void dwc3_debugfs_init(struct dwc3 *dwc) root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root); dwc->root = root; - debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); - - debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc, - &dwc3_lsp_fops); + debugfs_create_regset32("regdump", 0444, root, dwc->regset); + debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops); - if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { - debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) + debugfs_create_file("mode", 0644, root, dwc, &dwc3_mode_fops); - } if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) || IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { - debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, dwc, - &dwc3_testmode_fops); - debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc, + debugfs_create_file("testmode", 0644, root, dwc, + &dwc3_testmode_fops); + debugfs_create_file("link_state", 0644, root, dwc, &dwc3_link_state_fops); dwc3_debugfs_create_endpoint_dirs(dwc, root); } diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 1f7f4d88ed9d..417e05381b5d 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -116,23 +116,24 @@ static struct clk_bulk_data meson_a1_clocks[] = { { .id = "xtal_usb_ctrl" }, }; -static const char *meson_gxm_phy_names[] = { +static const char * const meson_gxm_phy_names[] = { "usb2-phy0", "usb2-phy1", "usb2-phy2", }; -static const char *meson_g12a_phy_names[] = { +static const char * const meson_g12a_phy_names[] = { "usb2-phy0", "usb2-phy1", "usb3-phy0", }; /* * Amlogic A1 has a single physical PHY, in slot 1, but still has the * two U2 PHY controls register blocks like G12A. + * AXG has the similar scheme, thus needs the same tweak. * Handling the first PHY on slot 1 would need a large amount of code * changes, and the current management is generic enough to handle it * correctly when only the "usb2-phy1" phy is specified on-par with the * DT bindings. */ -static const char *meson_a1_phy_names[] = { +static const char * const meson_a1_phy_names[] = { "usb2-phy0", "usb2-phy1" }; @@ -143,7 +144,7 @@ struct dwc3_meson_g12a_drvdata { bool otg_phy_host_port_disable; struct clk_bulk_data *clks; int num_clks; - const char **phy_names; + const char * const *phy_names; int num_phys; int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base); int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i, @@ -215,6 +216,19 @@ static struct dwc3_meson_g12a_drvdata gxm_drvdata = { .usb_post_init = dwc3_meson_gxl_usb_post_init, }; +static struct dwc3_meson_g12a_drvdata axg_drvdata = { + .otg_switch_supported = true, + .clks = meson_gxl_clocks, + .num_clks = ARRAY_SIZE(meson_gxl_clocks), + .phy_names = meson_a1_phy_names, + .num_phys = ARRAY_SIZE(meson_a1_phy_names), + .setup_regmaps = dwc3_meson_gxl_setup_regmaps, + .usb2_init_phy = dwc3_meson_gxl_usb2_init_phy, + .set_phy_mode = dwc3_meson_gxl_set_phy_mode, + .usb_init = dwc3_meson_g12a_usb_init, + .usb_post_init = dwc3_meson_gxl_usb_post_init, +}; + static struct dwc3_meson_g12a_drvdata g12a_drvdata = { .otg_switch_supported = true, .clks = meson_g12a_clocks, @@ -520,11 +534,7 @@ static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw, return 0; if (priv->drvdata->otg_phy_host_port_disable) - dev_warn_once(priv->dev, "Manual OTG switch is broken on this "\ - "SoC, when manual switching from "\ - "Host to device, DWC3 controller "\ - "will need to be resetted in order "\ - "to recover usage of the Host port"); + dev_warn_once(priv->dev, "Broken manual OTG switch\n"); return dwc3_meson_g12a_otg_mode_set(priv, mode); } @@ -626,10 +636,7 @@ static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv, /* GXL controls the PHY mode in the PHY registers unlike G12A */ priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base, &phy_meson_g12a_usb_glue_regmap_conf); - if (IS_ERR(priv->usb_glue_regmap)) - return PTR_ERR(priv->usb_glue_regmap); - - return 0; + return PTR_ERR_OR_ZERO(priv->usb_glue_regmap); } static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv, @@ -906,8 +913,8 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev) return ret; } - if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) { - ret = regulator_enable(priv->vbus); + if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) { + ret = regulator_enable(priv->vbus); if (ret) return ret; } @@ -931,6 +938,10 @@ static const struct of_device_id dwc3_meson_g12a_match[] = { .data = &gxm_drvdata, }, { + .compatible = "amlogic,meson-axg-usb-ctrl", + .data = &axg_drvdata, + }, + { .compatible = "amlogic,meson-g12a-usb-ctrl", .data = &g12a_drvdata, }, diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 7df115012935..e62ecd22b3ed 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -176,6 +176,8 @@ static const struct of_device_id of_dwc3_simple_match[] = { { .compatible = "cavium,octeon-7130-usb-uctl" }, { .compatible = "sprd,sc9860-dwc3" }, { .compatible = "allwinner,sun50i-h6-dwc3" }, + { .compatible = "hisilicon,hi3670-dwc3" }, + { .compatible = "intel,keembay-dwc3" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index f5a61f57c74f..242b6210380a 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -147,7 +147,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) if (pdev->vendor == PCI_VENDOR_ID_INTEL) { if (pdev->device == PCI_DEVICE_ID_INTEL_BXT || - pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) { + pdev->device == PCI_DEVICE_ID_INTEL_BXT_M || + pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) { guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid); dwc->has_dsm_for_pm = true; } diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index e1e78e9824b1..c703d552bbcf 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/extcon.h> +#include <linux/interconnect.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> @@ -43,6 +44,14 @@ #define SDM845_QSCRATCH_SIZE 0x400 #define SDM845_DWC3_CORE_SIZE 0xcd00 +/* Interconnect path bandwidths in MBps */ +#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240) +#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700) +#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000) +#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500) +#define APPS_USB_AVG_BW 0 +#define APPS_USB_PEAK_BW MBps_to_icc(40) + struct dwc3_acpi_pdata { u32 qscratch_base_offset; u32 qscratch_base_size; @@ -76,6 +85,8 @@ struct dwc3_qcom { enum usb_dr_mode mode; bool is_suspended; bool pm_suspended; + struct icc_path *icc_path_ddr; + struct icc_path *icc_path_apps; }; static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) @@ -190,6 +201,96 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) return 0; } +static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom) +{ + int ret; + + ret = icc_enable(qcom->icc_path_ddr); + if (ret) + return ret; + + ret = icc_enable(qcom->icc_path_apps); + if (ret) + icc_disable(qcom->icc_path_ddr); + + return ret; +} + +static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom) +{ + int ret; + + ret = icc_disable(qcom->icc_path_ddr); + if (ret) + return ret; + + ret = icc_disable(qcom->icc_path_apps); + if (ret) + icc_enable(qcom->icc_path_ddr); + + return ret; +} + +/** + * dwc3_qcom_interconnect_init() - Get interconnect path handles + * and set bandwidhth. + * @qcom: Pointer to the concerned usb core. + * + */ +static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) +{ + struct device *dev = qcom->dev; + int ret; + + qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); + if (IS_ERR(qcom->icc_path_ddr)) { + dev_err(dev, "failed to get usb-ddr path: %ld\n", + PTR_ERR(qcom->icc_path_ddr)); + return PTR_ERR(qcom->icc_path_ddr); + } + + qcom->icc_path_apps = of_icc_get(dev, "apps-usb"); + if (IS_ERR(qcom->icc_path_apps)) { + dev_err(dev, "failed to get apps-usb path: %ld\n", + PTR_ERR(qcom->icc_path_apps)); + return PTR_ERR(qcom->icc_path_apps); + } + + if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER || + usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN) + ret = icc_set_bw(qcom->icc_path_ddr, + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + else + ret = icc_set_bw(qcom->icc_path_ddr, + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + + if (ret) { + dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret); + return ret; + } + + ret = icc_set_bw(qcom->icc_path_apps, + APPS_USB_AVG_BW, APPS_USB_PEAK_BW); + if (ret) { + dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret); + return ret; + } + + return 0; +} + +/** + * dwc3_qcom_interconnect_exit() - Release interconnect path handles + * @qcom: Pointer to the concerned usb core. + * + * This function is used to release interconnect path handle. + */ +static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom) +{ + icc_put(qcom->icc_path_ddr); + icc_put(qcom->icc_path_apps); +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { if (qcom->hs_phy_irq) { @@ -239,7 +340,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) { u32 val; - int i; + int i, ret; if (qcom->is_suspended) return 0; @@ -251,6 +352,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) for (i = qcom->num_clocks - 1; i >= 0; i--) clk_disable_unprepare(qcom->clks[i]); + ret = dwc3_qcom_interconnect_disable(qcom); + if (ret) + dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret); + qcom->is_suspended = true; dwc3_qcom_enable_interrupts(qcom); @@ -276,6 +381,10 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom) } } + ret = dwc3_qcom_interconnect_enable(qcom); + if (ret) + dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret); + /* Clear existing events from PHY related to L2 in/out */ dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); @@ -335,7 +444,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata; - int irq, ret; + int irq; + int ret; + irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq", pdata ? pdata->hs_phy_irq_index : -1); if (irq > 0) { @@ -454,7 +565,7 @@ static const struct property_entry dwc3_qcom_acpi_properties[] = { static int dwc3_qcom_acpi_register_core(struct platform_device *pdev) { - struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; struct resource *res, *child_res = NULL; int irq; @@ -514,7 +625,7 @@ out: static int dwc3_qcom_of_register_core(struct platform_device *pdev) { - struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); struct device_node *np = pdev->dev.of_node, *dwc3_np; struct device *dev = &pdev->dev; int ret; @@ -638,6 +749,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev) goto depopulate; } + ret = dwc3_qcom_interconnect_init(qcom); + if (ret) + goto depopulate; + qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev); /* enable vbus override for device mode */ @@ -647,7 +762,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) /* register extcon to override sw_vbus on Vbus change later */ ret = dwc3_qcom_register_extcon(qcom); if (ret) - goto depopulate; + goto interconnect_exit; device_init_wakeup(&pdev->dev, 1); qcom->is_suspended = false; @@ -657,6 +772,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) return 0; +interconnect_exit: + dwc3_qcom_interconnect_exit(qcom); depopulate: if (np) of_platform_depopulate(&pdev->dev); @@ -687,6 +804,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev) } qcom->num_clocks = 0; + dwc3_qcom_interconnect_exit(qcom); reset_control_assert(qcom->resets); pm_runtime_allow(dev); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 59f2e8c31bd1..7be3903cb842 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -105,7 +105,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, * IRQ we were waiting for is long gone. */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { - unsigned direction; + unsigned int direction; direction = !!(dep->flags & DWC3_EP0_DIR_IN); @@ -127,11 +127,11 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, * handle it here. */ if (dwc->delayed_status) { - unsigned direction; + unsigned int direction; direction = !dwc->ep0_expect_in; dwc->delayed_status = false; - usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED); + usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED); if (dwc->ep0state == EP0_STATUS_PHASE) __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); @@ -172,7 +172,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, * XferNotReady(STATUS). */ if (dwc->three_stage_setup) { - unsigned direction; + unsigned int direction; direction = dwc->ep0_expect_in; dwc->ep0state = EP0_DATA_PHASE; @@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->endpoint.desc) { + if (!dep->endpoint.desc || !dwc->pullups_connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); ret = -ESHUTDOWN; @@ -325,7 +325,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, /* * LTM will be set once we know how to set this in HW. */ - usb_status |= dwc->gadget.is_selfpowered; + usb_status |= dwc->gadget->is_selfpowered; if ((dwc->speed == DWC3_DSTS_SUPERSPEED) || (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) { @@ -450,7 +450,7 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc, wValue = le16_to_cpu(ctrl->wValue); wIndex = le16_to_cpu(ctrl->wIndex); - state = dwc->gadget.state; + state = dwc->gadget->state; switch (wValue) { case USB_DEVICE_REMOTE_WAKEUP: @@ -524,6 +524,11 @@ static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc, ret = __dwc3_gadget_ep_set_halt(dep, set, true); if (ret) return -EINVAL; + + /* ClearFeature(Halt) may need delayed status */ + if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + return USB_GADGET_DELAYED_STATUS; + break; default: return -EINVAL; @@ -559,7 +564,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { - enum usb_device_state state = dwc->gadget.state; + enum usb_device_state state = dwc->gadget->state; u32 addr; u32 reg; @@ -580,9 +585,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc3_writel(dwc->regs, DWC3_DCFG, reg); if (addr) - usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS); + usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS); else - usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); + usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT); return 0; } @@ -592,14 +597,14 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) int ret; spin_unlock(&dwc->lock); - ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl); + ret = dwc->gadget_driver->setup(dwc->gadget, ctrl); spin_lock(&dwc->lock); return ret; } static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { - enum usb_device_state state = dwc->gadget.state; + enum usb_device_state state = dwc->gadget->state; u32 cfg; int ret; u32 reg; @@ -622,7 +627,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) * to change the state on the next usb_ep_queue() */ if (ret == 0) - usb_gadget_set_state(&dwc->gadget, + usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED); /* @@ -641,7 +646,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) case USB_STATE_CONFIGURED: ret = dwc3_ep0_delegate_req(dwc, ctrl); if (!cfg && !ret) - usb_gadget_set_state(&dwc->gadget, + usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS); break; default: @@ -697,7 +702,7 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { struct dwc3_ep *dep; - enum usb_device_state state = dwc->gadget.state; + enum usb_device_state state = dwc->gadget->state; u16 wLength; if (state == USB_STATE_DEFAULT) @@ -741,7 +746,7 @@ static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct if (wIndex || wLength) return -EINVAL; - dwc->gadget.isoch_delay = wValue; + dwc->gadget->isoch_delay = wValue; return 0; } @@ -942,12 +947,16 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req) { + unsigned int trb_length = 0; int ret; req->direction = !!dep->number; if (req->request.length == 0) { - dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, + if (!req->direction) + trb_length = dep->endpoint.maxpacket; + + dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length, DWC3_TRBCTL_CONTROL_DATA, false); ret = dwc3_ep0_start_trans(dep); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) @@ -994,9 +1003,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1]; + if (!req->direction) + trb_length = dep->endpoint.maxpacket; + /* Now prepare one extra TRB to align transfer size */ dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, - 0, DWC3_TRBCTL_CONTROL_DATA, + trb_length, DWC3_TRBCTL_CONTROL_DATA, false); ret = dwc3_ep0_start_trans(dep); } else { @@ -1042,6 +1054,17 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, __dwc3_ep0_do_control_status(dwc, dep); } +void dwc3_ep0_send_delayed_status(struct dwc3 *dwc) +{ + unsigned int direction = !dwc->ep0_expect_in; + + if (dwc->ep0state != EP0_STATUS_PHASE) + return; + + dwc->delayed_status = false; + __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); +} + static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; @@ -1102,7 +1125,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, */ if (!list_empty(&dep->pending_list)) { dwc->delayed_status = false; - usb_gadget_set_state(&dwc->gadget, + usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED); dwc3_ep0_do_control_status(dwc, event); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c2a0f64f8d1e..78cb4db8a6e4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -227,7 +227,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, * Caller should take care of locking. Issue @cmd with a given @param to @dwc * and wait for its completion. */ -int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param) +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, + u32 param) { u32 timeout = 500; int status = 0; @@ -268,7 +269,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc); * Caller should handle locking. This function will issue @cmd with given * @params to @dep and wait for its completion. */ -int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, +int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params) { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; @@ -290,7 +291,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, * * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2 */ - if (dwc->gadget.speed <= USB_SPEED_HIGH) { + if (dwc->gadget->speed <= USB_SPEED_HIGH) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) { saved_config |= DWC3_GUSB2PHYCFG_SUSPHY; @@ -422,7 +423,7 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) */ if (dep->direction && !DWC3_VER_IS_PRIOR(DWC3, 260A) && - (dwc->gadget.speed >= USB_SPEED_SUPER)) + (dwc->gadget->speed >= USB_SPEED_SUPER)) cmd |= DWC3_DEPCMD_CLEARPENDIN; memset(¶ms, 0, sizeof(params)); @@ -562,8 +563,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); /* Burst size is only needed in SuperSpeed mode */ - if (dwc->gadget.speed >= USB_SPEED_SUPER) { + if (dwc->gadget->speed >= USB_SPEED_SUPER) { u32 burst = dep->endpoint.maxburst; + params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1); } @@ -942,12 +944,13 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) } static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, - dma_addr_t dma, unsigned length, unsigned chain, unsigned node, - unsigned stream_id, unsigned short_not_ok, - unsigned no_interrupt, unsigned is_last) + dma_addr_t dma, unsigned int length, unsigned int chain, + unsigned int node, unsigned int stream_id, + unsigned int short_not_ok, unsigned int no_interrupt, + unsigned int is_last, bool must_interrupt) { struct dwc3 *dwc = dep->dwc; - struct usb_gadget *gadget = &dwc->gadget; + struct usb_gadget *gadget = dwc->gadget; enum usb_device_speed speed = gadget->speed; trb->size = DWC3_TRB_SIZE_LENGTH(length); @@ -1031,8 +1034,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; } - if ((!no_interrupt && !chain) || - (dwc3_calc_trbs_left(dep) == 1)) + if ((!no_interrupt && !chain) || must_interrupt) trb->ctrl |= DWC3_TRB_CTRL_IOC; if (chain) @@ -1057,19 +1059,24 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, * @trb_length: buffer size of the TRB * @chain: should this TRB be chained to the next? * @node: only for isochronous endpoints. First TRB needs different type. + * @use_bounce_buffer: set to use bounce buffer + * @must_interrupt: set to interrupt on TRB completion */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, unsigned int trb_length, - unsigned chain, unsigned node) + unsigned int chain, unsigned int node, bool use_bounce_buffer, + bool must_interrupt) { struct dwc3_trb *trb; dma_addr_t dma; - unsigned stream_id = req->request.stream_id; - unsigned short_not_ok = req->request.short_not_ok; - unsigned no_interrupt = req->request.no_interrupt; - unsigned is_last = req->request.is_last; - - if (req->request.num_sgs > 0) + unsigned int stream_id = req->request.stream_id; + unsigned int short_not_ok = req->request.short_not_ok; + unsigned int no_interrupt = req->request.no_interrupt; + unsigned int is_last = req->request.is_last; + + if (use_bounce_buffer) + dma = dep->dwc->bounce_addr; + else if (req->request.num_sgs > 0) dma = sg_dma_address(req->start_sg); else dma = req->request.dma; @@ -1085,10 +1092,63 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node, - stream_id, short_not_ok, no_interrupt, is_last); + stream_id, short_not_ok, no_interrupt, is_last, + must_interrupt); } -static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, +static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req) +{ + unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + unsigned int rem = req->request.length % maxp; + + if ((req->request.length && req->request.zero && !rem && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) || + (!req->direction && rem)) + return true; + + return false; +} + +/** + * dwc3_prepare_last_sg - prepare TRBs for the last SG entry + * @dep: The endpoint that the request belongs to + * @req: The request to prepare + * @entry_length: The last SG entry size + * @node: Indicates whether this is not the first entry (for isoc only) + * + * Return the number of TRBs prepared. + */ +static int dwc3_prepare_last_sg(struct dwc3_ep *dep, + struct dwc3_request *req, unsigned int entry_length, + unsigned int node) +{ + unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + unsigned int rem = req->request.length % maxp; + unsigned int num_trbs = 1; + + if (dwc3_needs_extra_trb(dep, req)) + num_trbs++; + + if (dwc3_calc_trbs_left(dep) < num_trbs) + return 0; + + req->needs_extra_trb = num_trbs > 1; + + /* Prepare a normal TRB */ + if (req->direction || req->request.length) + dwc3_prepare_one_trb(dep, req, entry_length, + req->needs_extra_trb, node, false, false); + + /* Prepare extra TRBs for ZLP and MPS OUT transfer alignment */ + if ((!req->direction && !req->request.length) || req->needs_extra_trb) + dwc3_prepare_one_trb(dep, req, + req->direction ? 0 : maxp - rem, + false, 1, true, false); + + return num_trbs; +} + +static int dwc3_prepare_trbs_sg(struct dwc3_ep *dep, struct dwc3_request *req) { struct scatterlist *sg = req->start_sg; @@ -1097,6 +1157,8 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, unsigned int length = req->request.length; unsigned int remaining = req->request.num_mapped_sgs - req->num_queued_sgs; + unsigned int num_trbs = req->num_trbs; + bool needs_extra_trb = dwc3_needs_extra_trb(dep, req); /* * If we resume preparing the request, then get the remaining length of @@ -1106,10 +1168,10 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, length -= sg_dma_len(s); for_each_sg(sg, s, remaining, i) { - unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); - unsigned int rem = length % maxp; + unsigned int num_trbs_left = dwc3_calc_trbs_left(dep); unsigned int trb_length; - unsigned chain = true; + bool must_interrupt = false; + bool last_sg = false; trb_length = min_t(unsigned int, length, sg_dma_len(s)); @@ -1123,59 +1185,28 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, * mapped sg. */ if ((i == remaining - 1) || !length) - chain = false; - - if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) { - struct dwc3 *dwc = dep->dwc; - struct dwc3_trb *trb; - - req->needs_extra_trb = true; - - /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, trb_length, true, i); - - /* Now prepare one extra TRB to align transfer size */ - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, - maxp - rem, false, 1, - req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - } else if (req->request.zero && req->request.length && - !usb_endpoint_xfer_isoc(dep->endpoint.desc) && - !rem && !chain) { - struct dwc3 *dwc = dep->dwc; - struct dwc3_trb *trb; - - req->needs_extra_trb = true; - - /* Prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, trb_length, true, i); - - /* Prepare one extra TRB to handle ZLP */ - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, - !req->direction, 1, - req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - - /* Prepare one more TRB to handle MPS alignment */ - if (!req->direction) { - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp, - false, 1, req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - } + last_sg = true; + + if (!num_trbs_left) + break; + + if (last_sg) { + if (!dwc3_prepare_last_sg(dep, req, trb_length, i)) + break; } else { - dwc3_prepare_one_trb(dep, req, trb_length, chain, i); + /* + * Look ahead to check if we have enough TRBs for the + * next SG entry. If not, set interrupt on this TRB to + * resume preparing the next SG entry when more TRBs are + * free. + */ + if (num_trbs_left == 1 || (needs_extra_trb && + num_trbs_left <= 2 && + sg_dma_len(sg_next(s)) >= length)) + must_interrupt = true; + + dwc3_prepare_one_trb(dep, req, trb_length, 1, i, false, + must_interrupt); } /* @@ -1185,7 +1216,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, * we have free trbs we can continue queuing from where we * previously stopped */ - if (chain) + if (!last_sg) req->start_sg = sg_next(s); req->num_queued_sgs++; @@ -1200,68 +1231,17 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, break; } - if (!dwc3_calc_trbs_left(dep)) + if (must_interrupt) break; } + + return req->num_trbs - num_trbs; } -static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, +static int dwc3_prepare_trbs_linear(struct dwc3_ep *dep, struct dwc3_request *req) { - unsigned int length = req->request.length; - unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); - unsigned int rem = length % maxp; - - if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) { - struct dwc3 *dwc = dep->dwc; - struct dwc3_trb *trb; - - req->needs_extra_trb = true; - - /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, length, true, 0); - - /* Now prepare one extra TRB to align transfer size */ - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, - false, 1, req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - } else if (req->request.zero && req->request.length && - !usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (IS_ALIGNED(req->request.length, maxp))) { - struct dwc3 *dwc = dep->dwc; - struct dwc3_trb *trb; - - req->needs_extra_trb = true; - - /* prepare normal TRB */ - dwc3_prepare_one_trb(dep, req, length, true, 0); - - /* Prepare one extra TRB to handle ZLP */ - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, - !req->direction, 1, req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - - /* Prepare one more TRB to handle MPS alignment for OUT */ - if (!req->direction) { - trb = &dep->trb_pool[dep->trb_enqueue]; - req->num_trbs++; - __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp, - false, 1, req->request.stream_id, - req->request.short_not_ok, - req->request.no_interrupt, - req->request.is_last); - } - } else { - dwc3_prepare_one_trb(dep, req, length, false, 0); - } + return dwc3_prepare_last_sg(dep, req, req->request.length, 0); } /* @@ -1271,10 +1251,13 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, * The function goes through the requests list and sets up TRBs for the * transfers. The function returns once there are no more TRBs available or * it runs out of requests. + * + * Returns the number of TRBs prepared or negative errno. */ -static void dwc3_prepare_trbs(struct dwc3_ep *dep) +static int dwc3_prepare_trbs(struct dwc3_ep *dep) { struct dwc3_request *req, *n; + int ret = 0; BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); @@ -1289,11 +1272,14 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) * break things. */ list_for_each_entry(req, &dep->started_list, list) { - if (req->num_pending_sgs > 0) - dwc3_prepare_one_trb_sg(dep, req); + if (req->num_pending_sgs > 0) { + ret = dwc3_prepare_trbs_sg(dep, req); + if (!ret || req->num_pending_sgs) + return ret; + } if (!dwc3_calc_trbs_left(dep)) - return; + return ret; /* * Don't prepare beyond a transfer. In DWC_usb32, its transfer @@ -1301,30 +1287,32 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) * active transfer instead of stopping. */ if (dep->stream_capable && req->request.is_last) - return; + return ret; } list_for_each_entry_safe(req, n, &dep->pending_list, list) { struct dwc3 *dwc = dep->dwc; - int ret; ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->direction); if (ret) - return; + return ret; req->sg = req->request.sg; req->start_sg = req->sg; req->num_queued_sgs = 0; req->num_pending_sgs = req->request.num_mapped_sgs; - if (req->num_pending_sgs > 0) - dwc3_prepare_one_trb_sg(dep, req); - else - dwc3_prepare_one_trb_linear(dep, req); + if (req->num_pending_sgs > 0) { + ret = dwc3_prepare_trbs_sg(dep, req); + if (req->num_pending_sgs) + return ret; + } else { + ret = dwc3_prepare_trbs_linear(dep, req); + } - if (!dwc3_calc_trbs_left(dep)) - return; + if (!ret || !dwc3_calc_trbs_left(dep)) + return ret; /* * Don't prepare beyond a transfer. In DWC_usb32, its transfer @@ -1332,8 +1320,10 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) * active transfer instead of stopping. */ if (dep->stream_capable && req->request.is_last) - return; + return ret; } + + return ret; } static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep); @@ -1346,12 +1336,24 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) int ret; u32 cmd; - if (!dwc3_calc_trbs_left(dep)) - return 0; + /* + * Note that it's normal to have no new TRBs prepared (i.e. ret == 0). + * This happens when we need to stop and restart a transfer such as in + * the case of reinitiating a stream or retrying an isoc transfer. + */ + ret = dwc3_prepare_trbs(dep); + if (ret < 0) + return ret; starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED); - dwc3_prepare_trbs(dep); + /* + * If there's no new TRB prepared and we don't need to restart a + * transfer, there's no need to update the transfer. + */ + if (!ret && !starting) + return ret; + req = next_request(&dep->started_list); if (!req) { dep->flags |= DWC3_EP_PENDING_REQUEST; @@ -1539,12 +1541,12 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) if (!dwc->dis_start_transfer_quirk && (DWC3_VER_IS_PRIOR(DWC31, 170A) || DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) { - if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction) + if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction) return dwc3_gadget_start_isoc_quirk(dep); } if (desc->bInterval <= 14 && - dwc->gadget.speed >= USB_SPEED_HIGH) { + dwc->gadget->speed >= USB_SPEED_HIGH) { u32 frame = __dwc3_gadget_get_frame(dwc); bool rollover = frame < (dep->frame_number & DWC3_FRNUMBER_MASK); @@ -1600,7 +1602,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - if (!dep->endpoint.desc) { + if (!dep->endpoint.desc || !dwc->pullups_connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); return -ESHUTDOWN; @@ -1628,8 +1630,13 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE) return 0; - /* Start the transfer only after the END_TRANSFER is completed */ - if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) { + /* + * Start the transfer only after the END_TRANSFER is completed + * and endpoint STALL is cleared. + */ + if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) || + (dep->flags & DWC3_EP_WEDGE) || + (dep->flags & DWC3_EP_STALL)) { dep->flags |= DWC3_EP_DELAY_START; return 0; } @@ -1648,9 +1655,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return 0; if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { - if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) return __dwc3_gadget_start_isoc(dep); - } } } @@ -1788,8 +1794,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) if (value) { struct dwc3_trb *trb; - unsigned transfer_in_flight; - unsigned started; + unsigned int transfer_in_flight; + unsigned int started; if (dep->number > 1) trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue); @@ -1822,6 +1828,18 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) return 0; } + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) { + dep->flags |= DWC3_EP_PENDING_CLEAR_STALL; + return 0; + } + + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + ret = dwc3_send_clear_stall_ep_cmd(dep); if (ret) { dev_err(dwc->dev, "failed to clear STALL on %s\n", @@ -1831,18 +1849,11 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); - dwc3_stop_active_transfer(dep, true, true); - - list_for_each_entry_safe(req, tmp, &dep->started_list, list) - dwc3_gadget_move_cancelled_request(req); - - list_for_each_entry_safe(req, tmp, &dep->pending_list, list) - dwc3_gadget_move_cancelled_request(req); + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); - if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) { - dep->flags &= ~DWC3_EP_DELAY_START; - dwc3_gadget_ep_cleanup_cancelled_requests(dep); - } + dep->flags &= ~DWC3_EP_DELAY_START; } return ret; @@ -2010,6 +2021,21 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, return 0; } +static void dwc3_stop_active_transfers(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 2; epnum < dwc->num_eps; epnum++) { + struct dwc3_ep *dep; + + dep = dwc->eps[epnum]; + if (!dep) + continue; + + dwc3_remove_requests(dwc, dep); + } +} + static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; @@ -2055,6 +2081,9 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) return 0; } +static void dwc3_gadget_disable_irq(struct dwc3 *dwc); +static void __dwc3_gadget_stop(struct dwc3 *dwc); + static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); @@ -2078,7 +2107,46 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) } } + /* + * Synchronize any pending event handling before executing the controller + * halt routine. + */ + if (!is_on) { + dwc3_gadget_disable_irq(dwc); + synchronize_irq(dwc->irq_gadget); + } + spin_lock_irqsave(&dwc->lock, flags); + + if (!is_on) { + u32 count; + + /* + * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.8 Table 4-7, it states that for a device-initiated + * disconnect, the SW needs to ensure that it sends "a DEPENDXFER + * command for any active transfers" before clearing the RunStop + * bit. + */ + dwc3_stop_active_transfers(dwc); + __dwc3_gadget_stop(dwc); + + /* + * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a + * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the + * "software needs to acknowledge the events that are generated + * (by writing to GEVNTCOUNTn) while it is waiting for this bit + * to be set to '1'." + */ + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + count &= DWC3_GEVNTCOUNT_MASK; + if (count > 0) { + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); + dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % + dwc->ev_buf->length; + } + } + ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); @@ -2244,7 +2312,7 @@ static int dwc3_gadget_start(struct usb_gadget *g, spin_lock_irqsave(&dwc->lock, flags); if (dwc->gadget_driver) { dev_err(dwc->dev, "%s is already bound to %s\n", - dwc->gadget.name, + dwc->gadget->name, dwc->gadget_driver->driver.name); ret = -EBUSY; goto err1; @@ -2416,7 +2484,7 @@ static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep) dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!dep->direction) - dwc->gadget.ep0 = &dep->endpoint; + dwc->gadget->ep0 = &dep->endpoint; dep->endpoint.caps.type_control = true; @@ -2459,10 +2527,10 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) usb_ep_set_maxpacket_limit(&dep->endpoint, size); - dep->endpoint.max_streams = 15; + dep->endpoint.max_streams = 16; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); + &dwc->gadget->ep_list); dep->endpoint.caps.type_iso = true; dep->endpoint.caps.type_bulk = true; dep->endpoint.caps.type_int = true; @@ -2508,10 +2576,10 @@ static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) size /= 3; usb_ep_set_maxpacket_limit(&dep->endpoint, size); - dep->endpoint.max_streams = 15; + dep->endpoint.max_streams = 16; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); + &dwc->gadget->ep_list); dep->endpoint.caps.type_iso = true; dep->endpoint.caps.type_bulk = true; dep->endpoint.caps.type_int = true; @@ -2572,7 +2640,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) { u8 epnum; - INIT_LIST_HEAD(&dwc->gadget.ep_list); + INIT_LIST_HEAD(&dwc->gadget->ep_list); for (epnum = 0; epnum < total; epnum++) { int ret; @@ -2652,12 +2720,12 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, } /* - * If we're dealing with unaligned size OUT transfer, we will be left - * with one TRB pending in the ring. We need to manually clear HWO bit - * from that TRB. + * We use bounce buffer for requests that needs extra TRB or OUT ZLP. If + * this TRB points to the bounce buffer address, it's a MPS alignment + * TRB. Don't add it to req->remaining calculation. */ - - if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { + if (trb->bpl == lower_32_bits(dep->dwc->bounce_addr) && + trb->bph == upper_32_bits(dep->dwc->bounce_addr)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } @@ -2732,26 +2800,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - if (req->needs_extra_trb) { - unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); + req->request.actual = req->request.length - req->remaining; + + if (!dwc3_gadget_ep_request_completed(req)) + goto out; + if (req->needs_extra_trb) { ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - - /* Reclaim MPS padding TRB for ZLP */ - if (!req->direction && req->request.zero && req->request.length && - !usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (IS_ALIGNED(req->request.length, maxp))) - ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - req->needs_extra_trb = false; } - req->request.actual = req->request.length - req->remaining; - - if (!dwc3_gadget_ep_request_completed(req)) - goto out; - dwc3_gadget_giveback(dep, req, status); out: @@ -2896,6 +2955,43 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, (void) __dwc3_gadget_start_isoc(dep); } +static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + u8 cmd = DEPEVT_PARAMETER_CMD(event->parameters); + + if (cmd != DWC3_DEPCMD_ENDTRANSFER) + return; + + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + + if (dep->flags & DWC3_EP_PENDING_CLEAR_STALL) { + struct dwc3 *dwc = dep->dwc; + + dep->flags &= ~DWC3_EP_PENDING_CLEAR_STALL; + if (dwc3_send_clear_stall_ep_cmd(dep)) { + struct usb_ep *ep0 = &dwc->eps[0]->endpoint; + + dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); + if (dwc->delayed_status) + __dwc3_gadget_ep0_set_halt(ep0, 1); + return; + } + + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + if (dwc->delayed_status) + dwc3_ep0_send_delayed_status(dwc); + } + + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); + + dep->flags &= ~DWC3_EP_DELAY_START; +} + static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { @@ -2965,7 +3061,6 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, { struct dwc3_ep *dep; u8 epnum = event->endpoint_number; - u8 cmd; dep = dwc->eps[epnum]; @@ -2991,18 +3086,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dwc3_gadget_endpoint_transfer_not_ready(dep, event); break; case DWC3_DEPEVT_EPCMDCMPLT: - cmd = DEPEVT_PARAMETER_CMD(event->parameters); - - if (cmd == DWC3_DEPCMD_ENDTRANSFER) { - dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; - dep->flags &= ~DWC3_EP_TRANSFER_STARTED; - dwc3_gadget_ep_cleanup_cancelled_requests(dep); - if ((dep->flags & DWC3_EP_DELAY_START) && - !usb_endpoint_xfer_isoc(dep->endpoint.desc)) - __dwc3_gadget_kick_transfer(dep); - - dep->flags &= ~DWC3_EP_DELAY_START; - } + dwc3_gadget_endpoint_command_complete(dep, event); break; case DWC3_DEPEVT_XFERCOMPLETE: dwc3_gadget_endpoint_transfer_complete(dep, event); @@ -3019,7 +3103,7 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { spin_unlock(&dwc->lock); - dwc->gadget_driver->disconnect(&dwc->gadget); + dwc->gadget_driver->disconnect(dwc->gadget); spin_lock(&dwc->lock); } } @@ -3028,7 +3112,7 @@ static void dwc3_suspend_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->suspend) { spin_unlock(&dwc->lock); - dwc->gadget_driver->suspend(&dwc->gadget); + dwc->gadget_driver->suspend(dwc->gadget); spin_lock(&dwc->lock); } } @@ -3037,7 +3121,7 @@ static void dwc3_resume_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); - dwc->gadget_driver->resume(&dwc->gadget); + dwc->gadget_driver->resume(dwc->gadget); spin_lock(&dwc->lock); } } @@ -3047,9 +3131,9 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) if (!dwc->gadget_driver) return; - if (dwc->gadget.speed != USB_SPEED_UNKNOWN) { + if (dwc->gadget->speed != USB_SPEED_UNKNOWN) { spin_unlock(&dwc->lock); - usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver); + usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver); spin_lock(&dwc->lock); } } @@ -3150,9 +3234,9 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc3_disconnect_gadget(dwc); - dwc->gadget.speed = USB_SPEED_UNKNOWN; + dwc->gadget->speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; - usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED); + usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); dwc->connected = false; } @@ -3195,6 +3279,13 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) } dwc3_reset_gadget(dwc); + /* + * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW + * needs to ensure that it sends "a DEPENDXFER command for any active + * transfers." + */ + dwc3_stop_active_transfers(dwc); reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; @@ -3231,8 +3322,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) switch (speed) { case DWC3_DSTS_SUPERSPEED_PLUS: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); - dwc->gadget.ep0->maxpacket = 512; - dwc->gadget.speed = USB_SPEED_SUPER_PLUS; + dwc->gadget->ep0->maxpacket = 512; + dwc->gadget->speed = USB_SPEED_SUPER_PLUS; break; case DWC3_DSTS_SUPERSPEED: /* @@ -3252,27 +3343,27 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc3_gadget_reset_interrupt(dwc); dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); - dwc->gadget.ep0->maxpacket = 512; - dwc->gadget.speed = USB_SPEED_SUPER; + dwc->gadget->ep0->maxpacket = 512; + dwc->gadget->speed = USB_SPEED_SUPER; break; case DWC3_DSTS_HIGHSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); - dwc->gadget.ep0->maxpacket = 64; - dwc->gadget.speed = USB_SPEED_HIGH; + dwc->gadget->ep0->maxpacket = 64; + dwc->gadget->speed = USB_SPEED_HIGH; break; case DWC3_DSTS_FULLSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); - dwc->gadget.ep0->maxpacket = 64; - dwc->gadget.speed = USB_SPEED_FULL; + dwc->gadget->ep0->maxpacket = 64; + dwc->gadget->speed = USB_SPEED_FULL; break; case DWC3_DSTS_LOWSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); - dwc->gadget.ep0->maxpacket = 8; - dwc->gadget.speed = USB_SPEED_LOW; + dwc->gadget->ep0->maxpacket = 8; + dwc->gadget->speed = USB_SPEED_LOW; break; } - dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket; + dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket; /* Enable USB2 LPM Capability */ @@ -3340,7 +3431,7 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) if (dwc->gadget_driver && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); - dwc->gadget_driver->resume(&dwc->gadget); + dwc->gadget_driver->resume(dwc->gadget); spin_lock(&dwc->lock); } } @@ -3511,7 +3602,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc, * Ignore suspend event until the gadget enters into * USB_STATE_CONFIGURED state. */ - if (dwc->gadget.state >= USB_STATE_CONFIGURED) + if (dwc->gadget->state >= USB_STATE_CONFIGURED) dwc3_gadget_suspend_interrupt(dwc, event->event_info); } @@ -3686,6 +3777,13 @@ out: return irq; } +static void dwc_gadget_release(struct device *dev) +{ + struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev); + + kfree(gadget); +} + /** * dwc3_gadget_init - initializes gadget related registers * @dwc: pointer to our controller context structure @@ -3696,6 +3794,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) { int ret; int irq; + struct device *dev; irq = dwc3_gadget_get_irq(dwc); if (irq < 0) { @@ -3728,12 +3827,21 @@ int dwc3_gadget_init(struct dwc3 *dwc) } init_completion(&dwc->ep0_in_setup); + dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL); + if (!dwc->gadget) { + ret = -ENOMEM; + goto err3; + } - dwc->gadget.ops = &dwc3_gadget_ops; - dwc->gadget.speed = USB_SPEED_UNKNOWN; - dwc->gadget.sg_supported = true; - dwc->gadget.name = "dwc3-gadget"; - dwc->gadget.lpm_capable = true; + + usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release); + dev = &dwc->gadget->dev; + dev->platform_data = dwc; + dwc->gadget->ops = &dwc3_gadget_ops; + dwc->gadget->speed = USB_SPEED_UNKNOWN; + dwc->gadget->sg_supported = true; + dwc->gadget->name = "dwc3-gadget"; + dwc->gadget->lpm_capable = true; /* * FIXME We might be setting max_speed to <SUPER, however versions @@ -3756,7 +3864,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) dev_info(dwc->dev, "changing max_speed on rev %08x\n", dwc->revision); - dwc->gadget.max_speed = dwc->maximum_speed; + dwc->gadget->max_speed = dwc->maximum_speed; /* * REVISIT: Here we should clear all pending IRQs to be @@ -3765,21 +3873,22 @@ int dwc3_gadget_init(struct dwc3 *dwc) ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps); if (ret) - goto err3; + goto err4; - ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); + ret = usb_add_gadget(dwc->gadget); if (ret) { - dev_err(dwc->dev, "failed to register udc\n"); - goto err4; + dev_err(dwc->dev, "failed to add gadget\n"); + goto err5; } - dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed); + dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed); return 0; -err4: +err5: dwc3_gadget_free_endpoints(dwc); - +err4: + usb_put_gadget(dwc->gadget); err3: dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, dwc->bounce_addr); @@ -3799,7 +3908,7 @@ err0: void dwc3_gadget_exit(struct dwc3 *dwc) { - usb_del_gadget_udc(&dwc->gadget); + usb_del_gadget_udc(dwc->gadget); dwc3_gadget_free_endpoints(dwc); dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce, dwc->bounce_addr); diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index bd85eb7fa9ef..0cd281949970 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -17,7 +17,7 @@ struct dwc3; #define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint)) -#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget)) +#define gadget_to_dwc(g) (dev_get_platdata(&g->dev)) /* DEPCFG parameter 1 */ #define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0) @@ -113,6 +113,7 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol); +void dwc3_ep0_send_delayed_status(struct dwc3 *dwc); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index da1be01637c8..97f4f1125a41 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -104,8 +104,8 @@ DECLARE_EVENT_CLASS(dwc3_log_request, TP_STRUCT__entry( __string(name, req->dep->name) __field(struct dwc3_request *, req) - __field(unsigned, actual) - __field(unsigned, length) + __field(unsigned int, actual) + __field(unsigned int, length) __field(int, status) __field(int, zero) __field(int, short_not_ok) @@ -246,6 +246,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->dequeue, __entry->bph, __entry->bpl, ({char *s; int pcm = ((__entry->size >> 24) & 3) + 1; + switch (__entry->type) { case USB_ENDPOINT_XFER_INT: case USB_ENDPOINT_XFER_ISOC: @@ -291,12 +292,12 @@ DECLARE_EVENT_CLASS(dwc3_log_ep, TP_ARGS(dep), TP_STRUCT__entry( __string(name, dep->name) - __field(unsigned, maxpacket) - __field(unsigned, maxpacket_limit) - __field(unsigned, max_streams) - __field(unsigned, maxburst) - __field(unsigned, flags) - __field(unsigned, direction) + __field(unsigned int, maxpacket) + __field(unsigned int, maxpacket_limit) + __field(unsigned int, max_streams) + __field(unsigned int, maxburst) + __field(unsigned int, flags) + __field(unsigned int, direction) __field(u8, trb_enqueue) __field(u8, trb_dequeue) ), diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index e6e6176386a4..aa213c9815f6 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -19,7 +19,7 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc) { - unsigned count = 1000; + unsigned int count = 1000; u32 reg; while (count--) { diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index b075dbfad730..45b42d8f6453 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -15,6 +15,7 @@ #include <linux/console.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/iopoll.h> #include <linux/pci_regs.h> #include <linux/pci_ids.h> #include <linux/usb/ch9.h> @@ -161,17 +162,11 @@ static inline u32 dbgp_pid_read_update(u32 x, u32 tok) static int dbgp_wait_until_complete(void) { u32 ctrl; - int loop = DBGP_TIMEOUT; - - do { - ctrl = readl(&ehci_debug->control); - /* Stop when the transaction is finished */ - if (ctrl & DBGP_DONE) - break; - udelay(1); - } while (--loop > 0); + int ret; - if (!loop) + ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl, + (ctrl & DBGP_DONE), 1, DBGP_TIMEOUT); + if (ret) return -DBGP_TIMEOUT; /* diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c index c0507767a8e3..be4ecbabdd58 100644 --- a/drivers/usb/early/xhci-dbc.c +++ b/drivers/usb/early/xhci-dbc.c @@ -14,6 +14,7 @@ #include <linux/pci_ids.h> #include <linux/memblock.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <asm/pci-direct.h> #include <asm/fixmap.h> #include <linux/bcd.h> @@ -135,16 +136,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay) { u32 result; - do { - result = readl(ptr); - result &= mask; - if (result == done) - return 0; - udelay(delay); - wait -= delay; - } while (wait > 0); - - return -ETIMEDOUT; + return readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done), + delay, wait); } static void __init xdbc_bios_handoff(void) diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c index 200596ea9557..46647bfac2ef 100644 --- a/drivers/usb/gadget/function/f_acm.c +++ b/drivers/usb/gadget/function/f_acm.c @@ -425,9 +425,11 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) /* we know alt == 0, so this is an activation or a reset */ if (intf == acm->ctrl_id) { - dev_vdbg(&cdev->gadget->dev, - "reset acm control interface %d\n", intf); - usb_ep_disable(acm->notify); + if (acm->notify->enabled) { + dev_vdbg(&cdev->gadget->dev, + "reset acm control interface %d\n", intf); + usb_ep_disable(acm->notify); + } if (!acm->notify->desc) if (config_ep_by_speed(cdev->gadget, f, acm->notify)) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 46af0aa07e2e..85cb15734aa8 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -698,9 +698,9 @@ drop_out: f_midi_drop_out_substreams(midi); } -static void f_midi_in_tasklet(unsigned long data) +static void f_midi_in_tasklet(struct tasklet_struct *t) { - struct f_midi *midi = (struct f_midi *) data; + struct f_midi *midi = from_tasklet(midi, t, tasklet); f_midi_transmit(midi); } @@ -875,7 +875,7 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) int status, n, jack = 1, i = 0, endpoint_descriptor_index = 0; midi->gadget = cdev->gadget; - tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi); + tasklet_setup(&midi->tasklet, f_midi_in_tasklet); status = f_midi_register_card(midi); if (status < 0) goto fail_register; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 1f638759a953..019bea8e09cc 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -85,8 +85,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f) /* peak (theoretical) bulk transfer rate in bits-per-second */ static inline unsigned ncm_bitrate(struct usb_gadget *g) { - if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) - return 13 * 1024 * 8 * 1000 * 8; + if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS) + return 4250000000U; + else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return 3750000000U; else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return 13 * 512 * 8 * 1000 * 8; else @@ -376,7 +378,7 @@ static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = { .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /* the following 2 values can be tweaked if necessary */ - /* .bMaxBurst = 0, */ + .bMaxBurst = 15, /* .bmAttributes = 0, */ }; @@ -1534,7 +1536,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) fs_ncm_notify_desc.bEndpointAddress; status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, - ncm_ss_function, NULL); + ncm_ss_function, ncm_ss_function); if (status) goto fail; diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index 68697f596066..64a4112068fc 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -31,6 +31,7 @@ #include <linux/types.h> #include <linux/ctype.h> #include <linux/cdev.h> +#include <linux/kref.h> #include <asm/byteorder.h> #include <linux/io.h> @@ -64,7 +65,7 @@ struct printer_dev { struct usb_gadget *gadget; s8 interface; struct usb_ep *in_ep, *out_ep; - + struct kref kref; struct list_head rx_reqs; /* List of free RX structs */ struct list_head rx_reqs_active; /* List of Active RX xfers */ struct list_head rx_buffers; /* List of completed xfers */ @@ -218,6 +219,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, /*-------------------------------------------------------------------------*/ +static void printer_dev_free(struct kref *kref) +{ + struct printer_dev *dev = container_of(kref, struct printer_dev, kref); + + kfree(dev); +} + static struct usb_request * printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) { @@ -353,6 +361,7 @@ printer_open(struct inode *inode, struct file *fd) spin_unlock_irqrestore(&dev->lock, flags); + kref_get(&dev->kref); DBG(dev, "printer_open returned %x\n", ret); return ret; } @@ -370,6 +379,7 @@ printer_close(struct inode *inode, struct file *fd) dev->printer_status &= ~PRINTER_SELECTED; spin_unlock_irqrestore(&dev->lock, flags); + kref_put(&dev->kref, printer_dev_free); DBG(dev, "printer_close\n"); return 0; @@ -1386,7 +1396,8 @@ static void gprinter_free(struct usb_function *f) struct f_printer_opts *opts; opts = container_of(f->fi, struct f_printer_opts, func_inst); - kfree(dev); + + kref_put(&dev->kref, printer_dev_free); mutex_lock(&opts->lock); --opts->refcnt; mutex_unlock(&opts->lock); @@ -1455,6 +1466,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) return ERR_PTR(-ENOMEM); } + kref_init(&dev->kref); ++opts->refcnt; dev->minor = opts->minor; dev->pnp_string = opts->pnp_string; diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 184165e27908..410fa89eae8f 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -392,12 +392,12 @@ static void bot_set_alt(struct f_uas *fu) fu->flags = USBG_IS_BOT; - config_ep_by_speed(gadget, f, fu->ep_in); + config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_BBB); ret = usb_ep_enable(fu->ep_in); if (ret) goto err_b_in; - config_ep_by_speed(gadget, f, fu->ep_out); + config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_BBB); ret = usb_ep_enable(fu->ep_out); if (ret) goto err_b_out; @@ -852,21 +852,21 @@ static void uasp_set_alt(struct f_uas *fu) if (gadget->speed >= USB_SPEED_SUPER) fu->flags |= USBG_USE_STREAMS; - config_ep_by_speed(gadget, f, fu->ep_in); + config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_UAS); ret = usb_ep_enable(fu->ep_in); if (ret) goto err_b_in; - config_ep_by_speed(gadget, f, fu->ep_out); + config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_UAS); ret = usb_ep_enable(fu->ep_out); if (ret) goto err_b_out; - config_ep_by_speed(gadget, f, fu->ep_cmd); + config_ep_by_speed_and_alt(gadget, f, fu->ep_cmd, USB_G_ALT_INT_UAS); ret = usb_ep_enable(fu->ep_cmd); if (ret) goto err_cmd; - config_ep_by_speed(gadget, f, fu->ep_status); + config_ep_by_speed_and_alt(gadget, f, fu->ep_status, USB_G_ALT_INT_UAS); ret = usb_ep_enable(fu->ep_status); if (ret) goto err_status; diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 0b9712616455..44b4352a2676 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -740,20 +740,20 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) /* Initialise video. */ ret = uvcg_video_init(&uvc->video, uvc); if (ret < 0) - goto error; + goto v4l2_error; /* Register a V4L2 device. */ ret = uvc_register_video(uvc); if (ret < 0) { uvcg_err(f, "failed to register video device\n"); - goto error; + goto v4l2_error; } return 0; -error: +v4l2_error: v4l2_device_unregister(&uvc->v4l2_dev); - +error: if (uvc->control_req) usb_ep_free_request(cdev->gadget->ep0, uvc->control_req); kfree(uvc->control_buf); diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index c3cc6bd14e61..31ea76adcc0d 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -93,7 +93,7 @@ struct eth_dev { static inline int qlen(struct usb_gadget *gadget, unsigned qmult) { if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH || - gadget->speed == USB_SPEED_SUPER)) + gadget->speed >= USB_SPEED_SUPER)) return qmult * DEFAULT_QLEN; else return DEFAULT_QLEN; diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 127ecc2b4317..2caccbb6e014 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1391,6 +1391,7 @@ void gserial_disconnect(struct gserial *gser) if (port->port.tty) tty_hangup(port->port.tty); } + port->suspended = false; spin_unlock_irqrestore(&port->port_lock, flags); /* disable endpoints, aborting down any active I/O */ diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c index cdf96911e4b1..be7bb64e3594 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data) /* Handle device interrupts */ if (istat & vhub->port_irq_mask) { - unsigned long bitmap = istat; - int offset = VHUB_IRQ_DEV1_BIT; - int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports; - - for_each_set_bit_from(offset, &bitmap, size) { - i = offset - VHUB_IRQ_DEV1_BIT; - ast_vhub_dev_irq(&vhub->ports[i].dev); + for (i = 0; i < vhub->max_ports; i++) { + if (istat & VHUB_DEV_IRQ(i)) + ast_vhub_dev_irq(&vhub->ports[i].dev); } } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index 2e5a1ef14a75..87a5dea12d3c 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -67,6 +67,9 @@ #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) #define VHUB_IRQ_ACK_ALL 0x1ff +/* Downstream device IRQ mask. */ +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n)) + /* SW reset reg */ #define VHUB_SW_RESET_EP_POOL (1 << 9) #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index a6426dd1cfef..2b893bceea45 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1056,16 +1056,19 @@ found_ep: switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: + ep->nr_banks = 1; break; case USB_ENDPOINT_XFER_ISOC: ep->fifo_size = 1024; - ep->nr_banks = 2; + if (ep->udc->ep_prealloc) + ep->nr_banks = 2; break; case USB_ENDPOINT_XFER_BULK: ep->fifo_size = 512; - ep->nr_banks = 1; + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; break; case USB_ENDPOINT_XFER_INT: @@ -1075,7 +1078,8 @@ found_ep: else ep->fifo_size = roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize)); - ep->nr_banks = 1; + if (ep->udc->ep_prealloc) + ep->nr_banks = 1; break; } @@ -1091,8 +1095,6 @@ found_ep: USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); - - ep->udc->configured_ep++; } return _ep; @@ -1786,7 +1788,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (status & USBA_END_OF_RESET) { struct usba_ep *ep0, *ep; - int i, n; + int i; usba_writel(udc, INT_CLR, USBA_END_OF_RESET|USBA_END_OF_RESUME @@ -1834,13 +1836,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) "ODD: EP0 configuration is invalid!\n"); /* Preallocate other endpoints */ - n = fifo_mode ? udc->num_ep : udc->configured_ep; - for (i = 1; i < n; i++) { + for (i = 1; i < udc->num_ep; i++) { ep = &udc->usba_ep[i]; - usba_ep_writel(ep, CFG, ep->ept_cfg); - if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) - dev_err(&udc->pdev->dev, - "ODD: EP%d configuration is invalid!\n", i); + if (ep->ep.claimed) { + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } } } @@ -2025,9 +2028,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget) if (udc->vbus_pin) disable_irq(gpiod_to_irq(udc->vbus_pin)); - if (fifo_mode == 0) - udc->configured_ep = 1; - udc->suspended = false; usba_stop(udc); @@ -2090,33 +2090,51 @@ static const struct usba_udc_config udc_at91sam9rl_cfg = { .errata = &at91sam9rl_errata, .config = ep_config_sam9, .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, }; static const struct usba_udc_config udc_at91sam9g45_cfg = { .errata = &at91sam9g45_errata, .config = ep_config_sam9, .num_ep = ARRAY_SIZE(ep_config_sam9), + .ep_prealloc = true, }; static const struct usba_udc_config udc_sama5d3_cfg = { .config = ep_config_sama5, .num_ep = ARRAY_SIZE(ep_config_sama5), + .ep_prealloc = true, +}; + +static const struct usba_udc_config udc_sam9x60_cfg = { + .num_ep = ARRAY_SIZE(ep_config_sam9), + .config = ep_config_sam9, + .ep_prealloc = false, }; static const struct of_device_id atmel_udc_dt_ids[] = { { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, + { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); +static const struct of_device_id atmel_pmc_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9rl-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { /* sentinel */ } +}; + static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, struct usba_udc *udc) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; + struct device_node *pp; int i, ret; struct usba_ep *eps, *ep; const struct usba_udc_config *udc_config; @@ -2126,14 +2144,19 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, return ERR_PTR(-EINVAL); udc_config = match->data; + udc->ep_prealloc = udc_config->ep_prealloc; udc->errata = udc_config->errata; - udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc"); - if (IS_ERR(udc->pmc)) - udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc"); - if (IS_ERR(udc->pmc)) - udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc"); - if (udc->errata && IS_ERR(udc->pmc)) - return ERR_CAST(udc->pmc); + if (udc->errata) { + pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids, + NULL); + if (!pp) + return ERR_PTR(-ENODEV); + + udc->pmc = syscon_node_to_regmap(pp); + of_node_put(pp); + if (IS_ERR(udc->pmc)) + return ERR_CAST(udc->pmc); + } udc->num_ep = 0; @@ -2142,7 +2165,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { udc->num_ep = udc_config->num_ep; - udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); } diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 48e332439ed5..620472f218bc 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -317,6 +317,7 @@ struct usba_udc_config { const struct usba_udc_errata *errata; const struct usba_ep_config *config; const int num_ep; + const bool ep_prealloc; }; struct usba_udc { @@ -336,7 +337,6 @@ struct usba_udc { int irq; struct gpio_desc *vbus_pin; int num_ep; - int configured_ep; struct usba_fifo_cfg *fifo_cfg; struct clk *pclk; struct clk *hclk; @@ -344,6 +344,7 @@ struct usba_udc { bool bias_pulse_needed; bool clocked; bool suspended; + bool ep_prealloc; u16 devstatus; diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index feaec00a3c16..9cd4a70ccdd6 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -26,6 +26,7 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/timer.h> +#include <linux/usb.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/workqueue.h> diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c index 5ff36525044e..0bef6b3f049b 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -484,7 +484,7 @@ static void bdc_phy_exit(struct bdc *bdc) static int bdc_probe(struct platform_device *pdev) { struct bdc *bdc; - int ret = -ENOMEM; + int ret; int irq; u32 temp; struct device *dev = &pdev->dev; @@ -510,10 +510,9 @@ static int bdc_probe(struct platform_device *pdev) bdc->clk = clk; bdc->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(bdc->regs)) { - dev_err(dev, "ioremap error\n"); - return -ENOMEM; - } + if (IS_ERR(bdc->regs)) + return PTR_ERR(bdc->regs); + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 4f82bcd31fd3..debf54205d22 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -715,6 +715,9 @@ int usb_gadget_disconnect(struct usb_gadget *gadget) goto out; } + if (!gadget->connected) + goto out; + if (gadget->deactivated) { /* * If gadget is deactivated we only save new state. @@ -1164,21 +1167,18 @@ static int check_pending_gadget_drivers(struct usb_udc *udc) } /** - * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list + * usb_initialize_gadget - initialize a gadget and its embedded struct device * @parent: the parent device to this udc. Usually the controller driver's * device. - * @gadget: the gadget to be added to the list. + * @gadget: the gadget to be initialized. * @release: a gadget release function. * * Returns zero on success, negative errno otherwise. * Calls the gadget release function in the latter case. */ -int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, +void usb_initialize_gadget(struct device *parent, struct usb_gadget *gadget, void (*release)(struct device *dev)) { - struct usb_udc *udc; - int ret = -ENOMEM; - dev_set_name(&gadget->dev, "gadget"); INIT_WORK(&gadget->work, usb_gadget_state_work); gadget->dev.parent = parent; @@ -1189,17 +1189,32 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, gadget->dev.release = usb_udc_nop_release; device_initialize(&gadget->dev); +} +EXPORT_SYMBOL_GPL(usb_initialize_gadget); + +/** + * usb_add_gadget - adds a new gadget to the udc class driver list + * @gadget: the gadget to be added to the list. + * + * Returns zero on success, negative errno otherwise. + * Does not do a final usb_put_gadget() if an error occurs. + */ +int usb_add_gadget(struct usb_gadget *gadget) +{ + struct usb_udc *udc; + int ret = -ENOMEM; udc = kzalloc(sizeof(*udc), GFP_KERNEL); if (!udc) - goto err_put_gadget; + goto error; device_initialize(&udc->dev); udc->dev.release = usb_udc_release; udc->dev.class = udc_class; udc->dev.groups = usb_udc_attr_groups; - udc->dev.parent = parent; - ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj)); + udc->dev.parent = gadget->dev.parent; + ret = dev_set_name(&udc->dev, "%s", + kobject_name(&gadget->dev.parent->kobj)); if (ret) goto err_put_udc; @@ -1242,8 +1257,30 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, err_put_udc: put_device(&udc->dev); - err_put_gadget: - put_device(&gadget->dev); + error: + return ret; +} +EXPORT_SYMBOL_GPL(usb_add_gadget); + +/** + * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list + * @parent: the parent device to this udc. Usually the controller driver's + * device. + * @gadget: the gadget to be added to the list. + * @release: a gadget release function. + * + * Returns zero on success, negative errno otherwise. + * Calls the gadget release function in the latter case. + */ +int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, + void (*release)(struct device *dev)) +{ + int ret; + + usb_initialize_gadget(parent, gadget, release); + ret = usb_add_gadget(gadget); + if (ret) + usb_put_gadget(gadget); return ret; } EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release); @@ -1311,13 +1348,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) } /** - * usb_del_gadget_udc - deletes @udc from udc_list + * usb_del_gadget - deletes @udc from udc_list * @gadget: the gadget to be removed. * - * This, will call usb_gadget_unregister_driver() if + * This will call usb_gadget_unregister_driver() if * the @udc is still busy. + * It will not do a final usb_put_gadget(). */ -void usb_del_gadget_udc(struct usb_gadget *gadget) +void usb_del_gadget(struct usb_gadget *gadget) { struct usb_udc *udc = gadget->udc; @@ -1340,8 +1378,20 @@ void usb_del_gadget_udc(struct usb_gadget *gadget) kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE); flush_work(&gadget->work); device_unregister(&udc->dev); - device_unregister(&gadget->dev); - memset(&gadget->dev, 0x00, sizeof(gadget->dev)); + device_del(&gadget->dev); +} +EXPORT_SYMBOL_GPL(usb_del_gadget); + +/** + * usb_del_gadget_udc - deletes @udc from udc_list + * @gadget: the gadget to be removed. + * + * Calls usb_del_gadget() and does a final usb_put_gadget(). + */ +void usb_del_gadget_udc(struct usb_gadget *gadget) +{ + usb_del_gadget(gadget); + usb_put_gadget(gadget); } EXPORT_SYMBOL_GPL(usb_del_gadget_udc); diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 2707be628298..fa66449b3907 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -923,9 +923,9 @@ static int qe_ep_rxframe_handle(struct qe_ep *ep) return 0; } -static void ep_rx_tasklet(unsigned long data) +static void ep_rx_tasklet(struct tasklet_struct *t) { - struct qe_udc *udc = (struct qe_udc *)data; + struct qe_udc *udc = from_tasklet(udc, t, rx_tasklet); struct qe_ep *ep; struct qe_frame *pframe; struct qe_bd __iomem *bd; @@ -2553,8 +2553,7 @@ static int qe_udc_probe(struct platform_device *ofdev) DMA_TO_DEVICE); } - tasklet_init(&udc->rx_tasklet, ep_rx_tasklet, - (unsigned long)udc); + tasklet_setup(&udc->rx_tasklet, ep_rx_tasklet); /* request irq and disable DR */ udc->usb_irq = irq_of_parse_and_map(np, 0); if (!udc->usb_irq) { diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index a6f7b2594c09..de528e3b0662 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2061,7 +2061,7 @@ static int fsl_proc_read(struct seq_file *m, void *v) "Sleep Enable: %d SOF Received Enable: %d " "Reset Enable: %d\n" "System Error Enable: %d " - "Port Change Dectected Enable: %d\n" + "Port Change Detected Enable: %d\n" "USB Error Intr Enable: %d USB Intr Enable: %d\n\n", (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, @@ -2439,11 +2439,12 @@ static int fsl_udc_probe(struct platform_device *pdev) /* DEN is bidirectional ep number, max_ep doubles the number */ udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2; - udc_controller->irq = platform_get_irq(pdev, 0); - if (udc_controller->irq <= 0) { - ret = udc_controller->irq ? : -ENODEV; + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + ret = ret ? : -ENODEV; goto err_iounmap; } + udc_controller->irq = ret; ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED, driver_name, udc_controller); diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index e8a4637a9a17..3f1c62adce4b 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -495,7 +495,7 @@ static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep) } } -static int proc_udc_show(struct seq_file *s, void *unused) +static int udc_show(struct seq_file *s, void *unused) { struct lpc32xx_udc *udc = s->private; struct lpc32xx_ep *ep; @@ -524,22 +524,11 @@ static int proc_udc_show(struct seq_file *s, void *unused) return 0; } -static int proc_udc_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_udc_show, PDE_DATA(inode)); -} - -static const struct file_operations proc_ops = { - .owner = THIS_MODULE, - .open = proc_udc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(udc); static void create_debug_file(struct lpc32xx_udc *udc) { - udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops); + udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &udc_fops); } static void remove_debug_file(struct lpc32xx_udc *udc) diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 44d1ea2307bb..23a735641c3d 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -9,7 +9,6 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/errno.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -2196,7 +2195,8 @@ static int net2272_present(struct net2272 *dev) static void net2272_gadget_release(struct device *_dev) { - struct net2272 *dev = dev_get_drvdata(_dev); + struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev); + kfree(dev); } @@ -2205,7 +2205,8 @@ net2272_gadget_release(struct device *_dev) static void net2272_remove(struct net2272 *dev) { - usb_del_gadget_udc(&dev->gadget); + if (dev->added) + usb_del_gadget(&dev->gadget); free_irq(dev->irq, dev); iounmap(dev->base_addr); device_remove_file(dev->dev, &dev_attr_registers); @@ -2235,6 +2236,7 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) /* the "gadget" abstracts/virtualizes the controller */ ret->gadget.name = driver_name; + usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release); return ret; } @@ -2273,10 +2275,10 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) if (ret) goto err_irq; - ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget, - net2272_gadget_release); + ret = usb_add_gadget(&dev->gadget); if (ret) goto err_add_udc; + dev->added = 1; return 0; @@ -2451,7 +2453,7 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_enable_device(pdev) < 0) { ret = -ENODEV; - goto err_free; + goto err_put; } pci_set_master(pdev); @@ -2474,8 +2476,8 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_pci: pci_disable_device(pdev); - err_free: - kfree(dev); + err_put: + usb_put_gadget(&dev->gadget); return ret; } @@ -2536,7 +2538,7 @@ net2272_pci_remove(struct pci_dev *pdev) pci_disable_device(pdev); - kfree(dev); + usb_put_gadget(&dev->gadget); } /* Table of matching PCI IDs */ @@ -2649,7 +2651,7 @@ net2272_plat_probe(struct platform_device *pdev) err_req: release_mem_region(base, len); err: - kfree(dev); + usb_put_gadget(&dev->gadget); return ret; } @@ -2664,7 +2666,7 @@ net2272_plat_remove(struct platform_device *pdev) release_mem_region(pdev->resource[0].start, resource_size(&pdev->resource[0])); - kfree(dev); + usb_put_gadget(&dev->gadget); return 0; } diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h index 87d0ab9ffeeb..c669308111c2 100644 --- a/drivers/usb/gadget/udc/net2272.h +++ b/drivers/usb/gadget/udc/net2272.h @@ -441,6 +441,7 @@ struct net2272 { unsigned protocol_stall:1, softconnect:1, wakeup:1, + added:1, dma_eot_polarity:1, dma_dack_polarity:1, dma_dreq_polarity:1, diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 7530bd9a08c4..fc9f99fe7f37 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -52,6 +52,7 @@ #include <linux/usb/gadget.h> #include <linux/prefetch.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <asm/byteorder.h> #include <asm/irq.h> @@ -360,18 +361,16 @@ print_err: static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; + int ret; - do { - result = readl(ptr); - if (result == ~(u32)0) /* "device unplugged" */ - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + ret = readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done || + result == U32_MAX), + 1, usec); + if (result == U32_MAX) /* device unplugged */ + return -ENODEV; + + return ret; } static const struct usb_ep_ops net2280_ep_ops; @@ -3561,7 +3560,7 @@ static irqreturn_t net2280_irq(int irq, void *_dev) static void gadget_release(struct device *_dev) { - struct net2280 *dev = dev_get_drvdata(_dev); + struct net2280 *dev = container_of(_dev, struct net2280, gadget.dev); kfree(dev); } @@ -3572,7 +3571,8 @@ static void net2280_remove(struct pci_dev *pdev) { struct net2280 *dev = pci_get_drvdata(pdev); - usb_del_gadget_udc(&dev->gadget); + if (dev->added) + usb_del_gadget(&dev->gadget); BUG_ON(dev->driver); @@ -3603,6 +3603,7 @@ static void net2280_remove(struct pci_dev *pdev) device_remove_file(&pdev->dev, &dev_attr_registers); ep_info(dev, "unbind\n"); + usb_put_gadget(&dev->gadget); } /* wrap this driver around the specified device, but @@ -3624,6 +3625,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) } pci_set_drvdata(pdev, dev); + usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release); spin_lock_init(&dev->lock); dev->quirks = id->driver_data; dev->pdev = pdev; @@ -3774,10 +3776,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (retval) goto done; - retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, - gadget_release); + retval = usb_add_gadget(&dev->gadget); if (retval) goto done; + dev->added = 1; return 0; done: diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index 85d3ca1698ba..7da3dc1e9729 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -156,6 +156,7 @@ struct net2280 { softconnect : 1, got_irq : 1, region:1, + added:1, u1_enable:1, u2_enable:1, ltm_enable:1, diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index 8afc31d94b0e..a3c1fc924268 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -12,12 +12,9 @@ #include <linux/interrupt.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/irq.h> -/* GPIO port for VBUS detecting */ -static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */ - #define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */ #define PCH_VBUS_INTERVAL 10 /* VBUS polling interval (msec) */ @@ -301,13 +298,13 @@ struct pch_udc_ep { /** * struct pch_vbus_gpio_data - Structure holding GPIO informaton * for detecting VBUS - * @port: gpio port number + * @port: gpio descriptor for the VBUS GPIO * @intr: gpio interrupt number * @irq_work_fall: Structure for WorkQueue * @irq_work_rise: Structure for WorkQueue */ struct pch_vbus_gpio_data { - int port; + struct gpio_desc *port; int intr; struct work_struct irq_work_fall; struct work_struct irq_work_rise; @@ -1254,7 +1251,7 @@ static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev) int vbus = 0; if (dev->vbus_gpio.port) - vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0; + vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0; else vbus = -1; @@ -1356,42 +1353,30 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data) /** * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS. * @dev: Reference to the driver structure - * @vbus_gpio_port: Number of GPIO port to detect gpio * * Return codes: * 0: Success * -EINVAL: GPIO port is invalid or can't be initialized. */ -static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port) +static int pch_vbus_gpio_init(struct pch_udc_dev *dev) { int err; int irq_num = 0; + struct gpio_desc *gpiod; - dev->vbus_gpio.port = 0; + dev->vbus_gpio.port = NULL; dev->vbus_gpio.intr = 0; - if (vbus_gpio_port <= -1) - return -EINVAL; - - err = gpio_is_valid(vbus_gpio_port); - if (!err) { - pr_err("%s: gpio port %d is invalid\n", - __func__, vbus_gpio_port); - return -EINVAL; - } - - err = gpio_request(vbus_gpio_port, "pch_vbus"); - if (err) { - pr_err("%s: can't request gpio port %d, err: %d\n", - __func__, vbus_gpio_port, err); - return -EINVAL; - } + /* Retrieve the GPIO line from the USB gadget device */ + gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + gpiod_set_consumer_name(gpiod, "pch_vbus"); - dev->vbus_gpio.port = vbus_gpio_port; - gpio_direction_input(vbus_gpio_port); + dev->vbus_gpio.port = gpiod; INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall); - irq_num = gpio_to_irq(vbus_gpio_port); + irq_num = gpiod_to_irq(gpiod); if (irq_num > 0) { irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH); err = request_irq(irq_num, pch_vbus_gpio_irq, 0, @@ -1417,9 +1402,6 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev) { if (dev->vbus_gpio.intr) free_irq(dev->vbus_gpio.intr, dev); - - if (dev->vbus_gpio.port) - gpio_free(dev->vbus_gpio.port); } /** @@ -2894,7 +2876,7 @@ static int pch_udc_pcd_init(struct pch_udc_dev *dev) { pch_udc_init(dev); pch_udc_pcd_reinit(dev); - pch_vbus_gpio_init(dev, vbus_gpio_port); + pch_vbus_gpio_init(dev); return 0; } @@ -3096,6 +3078,13 @@ static int pch_udc_probe(struct pci_dev *pdev, dev->base_addr = pcim_iomap_table(pdev)[bar]; + /* + * FIXME: add a GPIO descriptor table to pdev.dev using + * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on + * the PCI subsystem ID. The system-dependent GPIO is necessary for + * VBUS operation. + */ + /* initialize the hardware */ if (pch_udc_pcd_init(dev)) return -ENODEV; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index bc2e8eb737c3..e875a0b967c0 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -1270,7 +1270,6 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) { struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - struct s3c2410_udc *udc; int retval = -EINVAL; unsigned long flags; struct s3c2410_request *req = NULL; @@ -1283,8 +1282,6 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) if (!_ep || !_req) return retval; - udc = to_s3c2410_udc(ep->gadget); - local_irq_save(flags); list_for_each_entry(req, &ep->queue, queue) { diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index d6ff68c06911..580bef8eb4cb 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -705,11 +705,11 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) err = phy_power_on(xudc->curr_utmi_phy); if (err < 0) - dev_err(xudc->dev, "utmi power on failed %d\n", err); + dev_err(xudc->dev, "UTMI power on failed: %d\n", err); err = phy_power_on(xudc->curr_usb3_phy); if (err < 0) - dev_err(xudc->dev, "usb3 phy power on failed %d\n", err); + dev_err(xudc->dev, "USB3 PHY power on failed: %d\n", err); dev_dbg(xudc->dev, "device mode on\n"); @@ -759,11 +759,11 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) err = phy_power_off(xudc->curr_utmi_phy); if (err < 0) - dev_err(xudc->dev, "utmi_phy power off failed %d\n", err); + dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err); err = phy_power_off(xudc->curr_usb3_phy); if (err < 0) - dev_err(xudc->dev, "usb3_phy power off failed %d\n", err); + dev_err(xudc->dev, "USB3 PHY power off failed: %d\n", err); pm_runtime_put(xudc->dev); } @@ -1539,7 +1539,7 @@ static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt) return -EINVAL; if (usb_endpoint_xfer_isoc(ep->desc)) { - dev_err(xudc->dev, "can't halt isoc EP\n"); + dev_err(xudc->dev, "can't halt isochronous EP\n"); return -ENOTSUPP; } @@ -1788,7 +1788,7 @@ static int __tegra_xudc_ep_enable(struct tegra_xudc_ep *ep, if (usb_endpoint_xfer_isoc(desc)) { if (xudc->nr_isoch_eps > XUDC_MAX_ISOCH_EPS) { - dev_err(xudc->dev, "too many isoch endpoints\n"); + dev_err(xudc->dev, "too many isochronous endpoints\n"); return -EBUSY; } xudc->nr_isoch_eps++; @@ -3509,7 +3509,7 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc) if (IS_ERR(xudc->utmi_phy[i])) { err = PTR_ERR(xudc->utmi_phy[i]); if (err != -EPROBE_DEFER) - dev_err(xudc->dev, "failed to get usb2-%d phy: %d\n", + dev_err(xudc->dev, "failed to get usb2-%d PHY: %d\n", i, err); goto clean_up; @@ -3539,12 +3539,12 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc) if (IS_ERR(xudc->usb3_phy[i])) { err = PTR_ERR(xudc->usb3_phy[i]); if (err != -EPROBE_DEFER) - dev_err(xudc->dev, "failed to get usb3-%d phy: %d\n", + dev_err(xudc->dev, "failed to get usb3-%d PHY: %d\n", usb3, err); goto clean_up; } else if (xudc->usb3_phy[i]) - dev_dbg(xudc->dev, "usb3_phy-%d registered", usb3); + dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3); } return err; @@ -3577,13 +3577,13 @@ static int tegra_xudc_phy_init(struct tegra_xudc *xudc) for (i = 0; i < xudc->soc->num_phys; i++) { err = phy_init(xudc->utmi_phy[i]); if (err < 0) { - dev_err(xudc->dev, "utmi phy init failed: %d\n", err); + dev_err(xudc->dev, "UTMI PHY #%u initialization failed: %d\n", i, err); goto exit_phy; } err = phy_init(xudc->usb3_phy[i]); if (err < 0) { - dev_err(xudc->dev, "usb3 phy init failed: %d\n", err); + dev_err(xudc->dev, "USB3 PHY #%u initialization failed: %d\n", i, err); goto exit_phy; } } @@ -3692,34 +3692,33 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc) struct device *dev = xudc->dev; int err; - xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, - "dev"); + xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev"); if (IS_ERR(xudc->genpd_dev_device)) { err = PTR_ERR(xudc->genpd_dev_device); - dev_err(dev, "failed to get dev pm-domain: %d\n", err); + dev_err(dev, "failed to get device power domain: %d\n", err); return err; } xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss"); if (IS_ERR(xudc->genpd_dev_ss)) { err = PTR_ERR(xudc->genpd_dev_ss); - dev_err(dev, "failed to get superspeed pm-domain: %d\n", err); + dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err); return err; } xudc->genpd_dl_device = device_link_add(dev, xudc->genpd_dev_device, - DL_FLAG_PM_RUNTIME | - DL_FLAG_STATELESS); + DL_FLAG_PM_RUNTIME | + DL_FLAG_STATELESS); if (!xudc->genpd_dl_device) { - dev_err(dev, "adding usb device device link failed!\n"); + dev_err(dev, "failed to add USB device link\n"); return -ENODEV; } xudc->genpd_dl_ss = device_link_add(dev, xudc->genpd_dev_ss, - DL_FLAG_PM_RUNTIME | - DL_FLAG_STATELESS); + DL_FLAG_PM_RUNTIME | + DL_FLAG_STATELESS); if (!xudc->genpd_dl_ss) { - dev_err(dev, "adding superspeed device link failed!\n"); + dev_err(dev, "failed to add SuperSpeed device link\n"); return -ENODEV; } @@ -3733,7 +3732,7 @@ static int tegra_xudc_probe(struct platform_device *pdev) unsigned int i; int err; - xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_ATOMIC); + xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_KERNEL); if (!xudc) return -ENOMEM; @@ -3772,18 +3771,19 @@ static int tegra_xudc_probe(struct platform_device *pdev) return err; } - xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, - sizeof(*xudc->clks), GFP_KERNEL); + xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, sizeof(*xudc->clks), + GFP_KERNEL); if (!xudc->clks) return -ENOMEM; for (i = 0; i < xudc->soc->num_clks; i++) xudc->clks[i].id = xudc->soc->clock_names[i]; - err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, - xudc->clks); + err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, xudc->clks); if (err) { - dev_err(xudc->dev, "failed to request clks %d\n", err); + if (err != -EPROBE_DEFER) + dev_err(xudc->dev, "failed to request clocks: %d\n", err); + return err; } @@ -3798,7 +3798,9 @@ static int tegra_xudc_probe(struct platform_device *pdev) err = devm_regulator_bulk_get(&pdev->dev, xudc->soc->num_supplies, xudc->supplies); if (err) { - dev_err(xudc->dev, "failed to request regulators %d\n", err); + if (err != -EPROBE_DEFER) + dev_err(xudc->dev, "failed to request regulators: %d\n", err); + return err; } @@ -3808,7 +3810,7 @@ static int tegra_xudc_probe(struct platform_device *pdev) err = regulator_bulk_enable(xudc->soc->num_supplies, xudc->supplies); if (err) { - dev_err(xudc->dev, "failed to enable regulators %d\n", err); + dev_err(xudc->dev, "failed to enable regulators: %d\n", err); goto put_padctl; } diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index b1b777f33521..337b425dd4b0 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -498,15 +498,4 @@ static struct bcma_driver bcma_hcd_driver = { .suspend = bcma_hcd_suspend, .resume = bcma_hcd_resume, }; - -static int __init bcma_hcd_init(void) -{ - return bcma_driver_register(&bcma_hcd_driver); -} -module_init(bcma_hcd_init); - -static void __exit bcma_hcd_exit(void) -{ - bcma_driver_unregister(&bcma_hcd_driver); -} -module_exit(bcma_hcd_exit); +module_bcma_driver(bcma_hcd_driver); diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c index adaf8fb4b459..6b5a7a873e01 100644 --- a/drivers/usb/host/ehci-npcm7xx.c +++ b/drivers/usb/host/ehci-npcm7xx.c @@ -37,8 +37,7 @@ static const char hcd_name[] = "npcm7xx-ehci"; static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver; -#ifdef CONFIG_PM_SLEEP -static int ehci_npcm7xx_drv_suspend(struct device *dev) +static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); bool do_wakeup = device_may_wakeup(dev); @@ -46,14 +45,13 @@ static int ehci_npcm7xx_drv_suspend(struct device *dev) return ehci_suspend(hcd, do_wakeup); } -static int ehci_npcm7xx_drv_resume(struct device *dev) +static int __maybe_unused ehci_npcm7xx_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); ehci_resume(hcd, false); return 0; } -#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(ehci_npcm7xx_pm_ops, ehci_npcm7xx_drv_suspend, ehci_npcm7xx_drv_resume); @@ -183,7 +181,7 @@ static struct platform_driver npcm7xx_ehci_hcd_driver = { .driver = { .name = "npcm7xx-ehci", .bus = &platform_bus_type, - .pm = &ehci_npcm7xx_pm_ops, + .pm = pm_ptr(&ehci_npcm7xx_pm_ops), .of_match_table = npcm7xx_ehci_id_table, } }; diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 006c4f6188a5..a48dd3fac153 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -42,6 +42,9 @@ #define EHCI_MAX_CLKS 4 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) +#define BCM_USB_FIFO_THRESHOLD 0x00800040 +#define bcm_iproc_insnreg01 hostpc[0] + struct ehci_platform_priv { struct clk *clks[EHCI_MAX_CLKS]; struct reset_control *rsts; @@ -75,6 +78,11 @@ static int ehci_platform_reset(struct usb_hcd *hcd) if (pdata->no_io_watchdog) ehci->need_io_watchdog = 0; + + if (of_device_is_compatible(pdev->dev.of_node, "brcm,xgs-iproc-ehci")) + ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD, + &ehci->regs->bcm_iproc_insnreg01); + return 0; } @@ -410,8 +418,7 @@ static int ehci_platform_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int ehci_platform_suspend(struct device *dev) +static int __maybe_unused ehci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev_get_platdata(dev); @@ -433,7 +440,7 @@ static int ehci_platform_suspend(struct device *dev) return ret; } -static int ehci_platform_resume(struct device *dev) +static int __maybe_unused ehci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev_get_platdata(dev); @@ -464,7 +471,6 @@ static int ehci_platform_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_SLEEP */ static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, @@ -499,7 +505,7 @@ static struct platform_driver ehci_platform_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ehci-platform", - .pm = &ehci_platform_pm_ops, + .pm = pm_ptr(&ehci_platform_pm_ops), .of_match_table = vt8500_ehci_ids, .acpi_match_table = ACPI_PTR(ehci_acpi_match), } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 847979f265b1..6dfb242f9a4b 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -307,26 +307,6 @@ static int __maybe_unused same_tt(struct usb_device *dev1, #ifdef CONFIG_USB_EHCI_TT_NEWSCHED -/* Which uframe does the low/fullspeed transfer start in? - * - * The parameter is the mask of ssplits in "H-frame" terms - * and this returns the transfer start uframe in "B-frame" terms, - * which allows both to match, e.g. a ssplit in "H-frame" uframe 0 - * will cause a transfer in "B-frame" uframe 0. "B-frames" lag - * "H-frames" by 1 uframe. See the EHCI spec sec 4.5 and figure 4.7. - */ -static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) -{ - unsigned char smask = hc32_to_cpu(ehci, mask) & QH_SMASK; - - if (!smask) { - ehci_err(ehci, "invalid empty smask!\n"); - /* uframe 7 can't have bw so this will indicate failure */ - return 7; - } - return ffs(smask) - 1; -} - static const unsigned char max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index add796c78561..3694e450a11a 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -34,8 +34,7 @@ struct spear_ehci { static struct hc_driver __read_mostly ehci_spear_hc_driver; -#ifdef CONFIG_PM_SLEEP -static int ehci_spear_drv_suspend(struct device *dev) +static int __maybe_unused ehci_spear_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); bool do_wakeup = device_may_wakeup(dev); @@ -43,14 +42,13 @@ static int ehci_spear_drv_suspend(struct device *dev) return ehci_suspend(hcd, do_wakeup); } -static int ehci_spear_drv_resume(struct device *dev) +static int __maybe_unused ehci_spear_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); ehci_resume(hcd, false); return 0; } -#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); @@ -155,7 +153,7 @@ static struct platform_driver spear_ehci_hcd_driver = { .driver = { .name = "spear-ehci", .bus = &platform_bus_type, - .pm = &ehci_spear_pm_ops, + .pm = pm_ptr(&ehci_spear_pm_ops), .of_match_table = spear_ehci_id_table, } }; diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 194df8282471..1d94fcfac2c2 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -32,6 +32,7 @@ #include <linux/uaccess.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/clk.h> #include <asm/byteorder.h> @@ -883,18 +884,15 @@ static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; + int ret; - do { - result = fotg210_readl(fotg210, ptr); - if (result == ~(u32)0) /* card removed */ - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + ret = readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done || + result == U32_MAX), 1, usec); + if (result == U32_MAX) /* card removed */ + return -ENODEV; + + return ret; } /* Force HC to halt state from unknown (EHCI spec section 2.3). diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index dd37e77dae00..73e13e7c2b46 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -102,7 +102,7 @@ static void io_watchdog_func(struct timer_list *t); /* Some boards misreport power switching/overcurrent */ -static bool distrust_firmware = true; +static bool distrust_firmware; module_param (distrust_firmware, bool, 0); MODULE_PARM_DESC (distrust_firmware, "true to distrust firmware power/overcurrent setup"); @@ -673,20 +673,24 @@ retry: /* handle root hub init quirks ... */ val = roothub_a (ohci); - val &= ~(RH_A_PSM | RH_A_OCPM); + /* Configure for per-port over-current protection by default */ + val &= ~RH_A_NOCP; + val |= RH_A_OCPM; if (ohci->flags & OHCI_QUIRK_SUPERIO) { - /* NSC 87560 and maybe others */ + /* NSC 87560 and maybe others. + * Ganged power switching, no over-current protection. + */ val |= RH_A_NOCP; - val &= ~(RH_A_POTPGT | RH_A_NPS); - ohci_writel (ohci, val, &ohci->regs->roothub.a); + val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM); } else if ((ohci->flags & OHCI_QUIRK_AMD756) || (ohci->flags & OHCI_QUIRK_HUB_POWER)) { /* hub power always on; required for AMD-756 and some - * Mac platforms. ganged overcurrent reporting, if any. + * Mac platforms. */ val |= RH_A_NPS; - ohci_writel (ohci, val, &ohci->regs->roothub.a); } + ohci_writel(ohci, val, &ohci->regs->roothub.a); + ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status); ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM, &ohci->regs->roothub.b); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index cfa7dd2cc7d3..27dbbe1b28b1 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -24,6 +24,7 @@ #include <linux/moduleparam.h> #include <linux/dma-mapping.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <asm/irq.h> #include <asm/unaligned.h> @@ -748,18 +749,16 @@ static int handshake(struct oxu_hcd *oxu, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; + int ret; - do { - result = readl(ptr); - if (result == ~(u32)0) /* card removed */ - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + ret = readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done || + result == U32_MAX), + 1, usec); + if (result == U32_MAX) /* card removed */ + return -ENODEV; + + return ret; } /* Force HC to halt state from unknown (EHCI spec section 2.3) */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 8c1bbac6d136..ef08d68b9714 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,8 +16,8 @@ #include <linux/export.h> #include <linux/acpi.h> #include <linux/dmi.h> - -#include <soc/bcm2835/raspberrypi-firmware.h> +#include <linux/of.h> +#include <linux/iopoll.h> #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1013,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, { u32 result; - do { - result = readl(ptr); - result &= mask; - if (result == done) - return 0; - udelay(delay_usec); - wait_usec -= delay_usec; - } while (wait_usec > 0); - return -ETIMEDOUT; + return readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done), + delay_usec, wait_usec); } /* @@ -1247,7 +1241,8 @@ iounmap: static void quirk_usb_early_handoff(struct pci_dev *pdev) { - int ret; + struct device_node *parent; + bool is_rpi; /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff @@ -1255,14 +1250,16 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + /* + * Bypass the Raspberry Pi 4 controller xHCI controller, things are + * taken care of by the board's co-processor. + */ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { - ret = rpi_firmware_init_vl805(pdev); - if (ret) { - /* Firmware might be outdated, or something failed */ - dev_warn(&pdev->dev, - "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", - ret); - } + parent = of_get_parent(pdev->bus->dev.of_node); + is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie"); + of_node_put(parent); + if (is_rpi) + return; } if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index b8918f73a432..ae4e4ab638b5 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -288,14 +288,14 @@ static const struct tty_operations dbc_tty_ops = { .unthrottle = dbc_tty_unthrottle, }; -static void dbc_rx_push(unsigned long _port) +static void dbc_rx_push(struct tasklet_struct *t) { struct dbc_request *req; struct tty_struct *tty; unsigned long flags; bool do_push = false; bool disconnect = false; - struct dbc_port *port = (void *)_port; + struct dbc_port *port = from_tasklet(port, t, push); struct list_head *queue = &port->read_queue; spin_lock_irqsave(&port->port_lock, flags); @@ -382,7 +382,7 @@ xhci_dbc_tty_init_port(struct xhci_dbc *dbc, struct dbc_port *port) { tty_port_init(&port->port); spin_lock_init(&port->port_lock); - tasklet_init(&port->push, dbc_rx_push, (unsigned long)port); + tasklet_setup(&port->push, dbc_rx_push); INIT_LIST_HEAD(&port->read_pool); INIT_LIST_HEAD(&port->read_queue); INIT_LIST_HEAD(&port->write_pool); diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index c88bffd68742..2c0fda57869e 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -451,9 +451,11 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, if (!epriv) return; + epriv->show_ring = dev->eps[ep_index].ring; + snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index); epriv->root = xhci_debugfs_create_ring_dir(xhci, - &dev->eps[ep_index].ring, + &epriv->show_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv; @@ -475,6 +477,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, kfree(epriv); } +static int xhci_stream_id_show(struct seq_file *s, void *unused) +{ + struct xhci_ep_priv *epriv = s->private; + + if (!epriv->stream_info) + return -EPERM; + + seq_printf(s, "Show stream ID %d trb ring, supported [1 - %d]\n", + epriv->stream_id, epriv->stream_info->num_streams - 1); + + return 0; +} + +static int xhci_stream_id_open(struct inode *inode, struct file *file) +{ + return single_open(file, xhci_stream_id_show, inode->i_private); +} + +static ssize_t xhci_stream_id_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct xhci_ep_priv *epriv = s->private; + int ret; + u16 stream_id; /* MaxPStreams + 1 <= 16 */ + + if (!epriv->stream_info) + return -EPERM; + + /* Decimal number */ + ret = kstrtou16_from_user(ubuf, count, 10, &stream_id); + if (ret) + return ret; + + if (stream_id == 0 || stream_id >= epriv->stream_info->num_streams) + return -EINVAL; + + epriv->stream_id = stream_id; + epriv->show_ring = epriv->stream_info->stream_rings[stream_id]; + + return count; +} + +static const struct file_operations stream_id_fops = { + .open = xhci_stream_id_open, + .write = xhci_stream_id_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int xhci_stream_context_array_show(struct seq_file *s, void *unused) +{ + struct xhci_ep_priv *epriv = s->private; + struct xhci_stream_ctx *stream_ctx; + dma_addr_t dma; + int id; + + if (!epriv->stream_info) + return -EPERM; + + seq_printf(s, "Allocated %d streams and %d stream context array entries\n", + epriv->stream_info->num_streams, + epriv->stream_info->num_stream_ctxs); + + for (id = 0; id < epriv->stream_info->num_stream_ctxs; id++) { + stream_ctx = epriv->stream_info->stream_ctx_array + id; + dma = epriv->stream_info->ctx_array_dma + id * 16; + if (id < epriv->stream_info->num_streams) + seq_printf(s, "%pad stream id %d deq %016llx\n", &dma, + id, le64_to_cpu(stream_ctx->stream_ring)); + else + seq_printf(s, "%pad stream context entry not used deq %016llx\n", + &dma, le64_to_cpu(stream_ctx->stream_ring)); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(xhci_stream_context_array); + +void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci, + struct xhci_virt_device *dev, + int ep_index) +{ + struct xhci_slot_priv *spriv = dev->debugfs_private; + struct xhci_ep_priv *epriv; + + if (!spriv || !spriv->eps[ep_index] || + !dev->eps[ep_index].stream_info) + return; + + epriv = spriv->eps[ep_index]; + epriv->stream_info = dev->eps[ep_index].stream_info; + + /* Show trb ring of stream ID 1 by default */ + epriv->stream_id = 1; + epriv->show_ring = epriv->stream_info->stream_rings[1]; + debugfs_create_file("stream_id", 0644, + epriv->root, epriv, + &stream_id_fops); + debugfs_create_file("stream_context_array", 0444, + epriv->root, epriv, + &xhci_stream_context_array_fops); +} + void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id) { struct xhci_slot_priv *priv; diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h index 56db635fcd6e..7c074b4be819 100644 --- a/drivers/usb/host/xhci-debugfs.h +++ b/drivers/usb/host/xhci-debugfs.h @@ -91,6 +91,9 @@ struct xhci_file_map { struct xhci_ep_priv { char name[DEBUGFS_NAMELEN]; struct dentry *root; + struct xhci_stream_info *stream_info; + struct xhci_ring *show_ring; + unsigned int stream_id; }; struct xhci_slot_priv { @@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index); +void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int ep_index); #else static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { } static inline void xhci_debugfs_exit(struct xhci_hcd *xhci) { } @@ -128,6 +134,10 @@ static inline void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int ep_index) { } +static inline void +xhci_debugfs_create_stream_files(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int ep_index) { } #endif /* CONFIG_DEBUG_FS */ #endif /* __LINUX_XHCI_DEBUGFS_H */ diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 4311d4c9b68d..8f321f39ab96 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -77,7 +77,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) { struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; u32 value, check_val; - int u3_ports_disabed = 0; + int u3_ports_disabled = 0; int ret; int i; @@ -92,7 +92,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) /* power on and enable u3 ports except skipped ones */ for (i = 0; i < mtk->num_u3_ports; i++) { if ((0x1 << i) & mtk->u3p_dis_msk) { - u3_ports_disabed++; + u3_ports_disabled++; continue; } @@ -117,7 +117,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) check_val = STS1_SYSPLL_STABLE | STS1_REF_RST | STS1_SYS125_RST | STS1_XHCI_RST; - if (mtk->num_u3_ports > u3_ports_disabed) + if (mtk->num_u3_ports > u3_ports_disabled) check_val |= STS1_U3_MAC_RST; ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 3feaafebfe58..c26c06e5c88c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/acpi.h> +#include <linux/reset.h> #include "xhci.h" #include "xhci-trace.h" @@ -346,6 +347,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct xhci_hcd *xhci; struct usb_hcd *hcd; struct xhci_driver_data *driver_data; + struct reset_control *reset; driver_data = (struct xhci_driver_data *)id->driver_data; if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { @@ -354,6 +356,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; } + reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + reset_control_reset(reset); + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); @@ -371,6 +378,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); xhci = hcd_to_xhci(hcd); + xhci->reset = reset; xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, pci_name(dev), hcd); if (!xhci->shared_hcd) { @@ -522,6 +530,8 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; + reset_control_reset(xhci->reset); + /* The BIOS on systems with the Intel Panther Point chipset may or may * not support xHCI natively. That means that during system resume, it * may switch the ports back to EHCI so that users can use their diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3057cfc76d6a..aa2d35f98200 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -54,6 +54,16 @@ static int xhci_priv_init_quirk(struct usb_hcd *hcd) return priv->init_quirk(hcd); } +static int xhci_priv_suspend_quirk(struct usb_hcd *hcd) +{ + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + + if (!priv->suspend_quirk) + return 0; + + return priv->suspend_quirk(hcd); +} + static int xhci_priv_resume_quirk(struct usb_hcd *hcd) { struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); @@ -173,6 +183,8 @@ static int xhci_plat_probe(struct platform_device *pdev) struct usb_hcd *hcd; int ret; int irq; + struct xhci_plat_priv *priv = NULL; + if (usb_disabled()) return -ENODEV; @@ -264,16 +276,18 @@ static int xhci_plat_probe(struct platform_device *pdev) if (ret) goto disable_reg_clk; - priv_match = of_device_get_match_data(&pdev->dev); - if (priv_match) { - struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + if (pdev->dev.of_node) + priv_match = of_device_get_match_data(&pdev->dev); + else + priv_match = dev_get_platdata(&pdev->dev); + if (priv_match) { + priv = hcd_to_xhci_priv(hcd); /* Just copy data for now */ - if (priv_match) - *priv = *priv_match; + *priv = *priv_match; } - device_wakeup_enable(hcd->self.controller); + device_set_wakeup_capable(&pdev->dev, true); xhci->main_hcd = hcd; xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, @@ -316,6 +330,9 @@ static int xhci_plat_probe(struct platform_device *pdev) hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); xhci->shared_hcd->tpl_support = hcd->tpl_support; + if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) + hcd->skip_phy_initialization = 1; + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto disable_usb_phy; @@ -397,14 +414,14 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + ret = xhci_priv_suspend_quirk(hcd); + if (ret) + return ret; /* * xhci_suspend() needs `do_wakeup` to know whether host is allowed - * to do wakeup during suspend. Since xhci_plat_suspend is currently - * only designed for system suspend, device_may_wakeup() is enough - * to dertermine whether host is allowed to do wakeup. Need to - * reconsider this when xhci_plat_suspend enlarges its scope, e.g., - * also applies to runtime suspend. + * to do wakeup during suspend. */ return xhci_suspend(xhci, device_may_wakeup(dev)); } @@ -434,6 +451,11 @@ static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + ret = xhci_priv_suspend_quirk(hcd); + if (ret) + return ret; return xhci_suspend(xhci, true); } diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index b49f6447bd3a..1fb149d1fbce 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -15,6 +15,7 @@ struct xhci_plat_priv { unsigned long long quirks; void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); + int (*suspend_quirk)(struct usb_hcd *); int (*resume_quirk)(struct usb_hcd *); }; diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index c1025d321a41..1bc4fe7b8c75 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -6,6 +6,7 @@ */ #include <linux/firmware.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) void __iomem *regs = hcd->regs; struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); const struct firmware *fw; - int retval, index, j, time; - int timeout = 10000; + int retval, index, j; u32 data, val, temp; u32 quirks = 0; const struct soc_device_attribute *attr; @@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0; writel(temp, regs + RCAR_USB3_DL_CTRL); - for (time = 0; time < timeout; time++) { - val = readl(regs + RCAR_USB3_DL_CTRL); - if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0) - break; - udelay(1); - } - if (time == timeout) { - retval = -ETIMEDOUT; + retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL, + val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0), + 1, 10000); + if (retval < 0) break; - } } temp = readl(regs + RCAR_USB3_DL_CTRL); temp &= ~RCAR_USB3_DL_CTRL_ENABLE; writel(temp, regs + RCAR_USB3_DL_CTRL); - for (time = 0; time < timeout; time++) { - val = readl(regs + RCAR_USB3_DL_CTRL); - if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) { - retval = 0; - break; - } - udelay(1); - } - if (time == timeout) - retval = -ETIMEDOUT; + retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL), + val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000); release_firmware(fw); @@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) { - int timeout = 1000; + int retval; u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK; - while (timeout > 0) { - val = readl(hcd->regs + RCAR_USB3_AXH_STA); - if ((val & mask) == mask) - return true; - udelay(1); - timeout--; - } - - return false; + retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA, + val, (val & mask) == mask, 1, 1000); + return !retval; } /* This function needs to initialize a "phy" of usb before */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a741a38a4c69..167dae117f73 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3736,6 +3736,24 @@ static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci, return start_frame; } +/* Check if we should generate event interrupt for a TD in an isoc URB */ +static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i) +{ + if (xhci->hci_version < 0x100) + return false; + /* always generate an event interrupt for the last TD */ + if (i == num_tds - 1) + return false; + /* + * If AVOID_BEI is set the host handles full event rings poorly, + * generate an event at least every 8th TD to clear the event ring + */ + if (i && xhci->quirks & XHCI_AVOID_BEI) + return !!(i % 8); + + return true; +} + /* This is for isoc transfer */ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) @@ -3843,10 +3861,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, more_trbs_coming = false; td->last_trb = ep_ring->enqueue; field |= TRB_IOC; - /* set BEI, except for the last TD */ - if (xhci->hci_version >= 0x100 && - !(xhci->quirks & XHCI_AVOID_BEI) && - i < num_tds - 1) + if (trb_block_event_intr(xhci, num_tds, i)) field |= TRB_BEI; } /* Calculate TRB length */ diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 190923d8b246..934be1686352 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1866,7 +1866,6 @@ static const struct tegra_xusb_phy_type tegra124_phy_types[] = { static const unsigned int tegra124_xusb_context_ipfs[] = { IPFS_XUSB_HOST_MSI_BAR_SZ_0, - IPFS_XUSB_HOST_MSI_BAR_SZ_0, IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0, IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0, IPFS_XUSB_HOST_MSI_VEC0_0, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f4cedcaee14b..482fe8c5e3b4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -982,12 +982,15 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; - xhci_dbc_suspend(xhci); - /* Clear root port wake on bits if wakeup not allowed. */ if (!do_wakeup) xhci_disable_port_wake_on_bits(xhci); + if (!HCD_HW_ACCESSIBLE(hcd)) + return 0; + + xhci_dbc_suspend(xhci); + /* Don't poll the roothubs on bus suspend. */ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); @@ -1915,8 +1918,6 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); trace_xhci_add_endpoint(ep_ctx); - xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index); - xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", (unsigned int) ep->desc.bEndpointAddress, udev->slot_id, @@ -2949,6 +2950,7 @@ static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; + xhci_debugfs_create_endpoint(xhci, virt_dev, i); } command_cleanup: kfree(command->completion); @@ -3531,6 +3533,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n", udev->slot_id, ep_index); vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS; + xhci_debugfs_create_stream_files(xhci, vdev, ep_index); } xhci_free_command(xhci, config_cmd); spin_unlock_irqrestore(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ea1754f185a2..8be88379c0fb 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1770,6 +1770,8 @@ struct xhci_hcd { /* optional clocks */ struct clk *clk; struct clk *reg_clk; + /* optional reset controller */ + struct reset_control *reset; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; @@ -1874,6 +1876,7 @@ struct xhci_hcd { #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36) +#define XHCI_SKIP_PHY_INIT BIT_ULL(37) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 360416680e82..59b02a539963 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -389,7 +389,7 @@ void mts_int_submit_urb (struct urb* transfer, res = usb_submit_urb( transfer, GFP_ATOMIC ); if ( unlikely(res) ) { MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res ); - context->srb->result = DID_ERROR << 16; + set_host_byte(context->srb, DID_ERROR); mts_transfer_cleanup(transfer); } } @@ -438,7 +438,7 @@ static void mts_data_done( struct urb* transfer ) scsi_set_resid(context->srb, context->data_length - transfer->actual_length); } else if ( unlikely(status) ) { - context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; + set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR)); } mts_get_status(transfer); @@ -455,12 +455,12 @@ static void mts_command_done( struct urb *transfer ) if (status == -ENOENT) { /* We are being killed */ MTS_DEBUG_GOT_HERE(); - context->srb->result = DID_ABORT<<16; + set_host_byte(context->srb, DID_ABORT); } else { /* A genuine error has occurred */ MTS_DEBUG_GOT_HERE(); - context->srb->result = DID_ERROR<<16; + set_host_byte(context->srb, DID_ERROR); } mts_transfer_cleanup(transfer); @@ -495,7 +495,7 @@ static void mts_do_sg (struct urb* transfer) scsi_sg_count(context->srb)); if (unlikely(status)) { - context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; + set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR)); mts_transfer_cleanup(transfer); } @@ -578,7 +578,7 @@ mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback MTS_DEBUG("this device doesn't exist\n"); - srb->result = DID_BAD_TARGET << 16; + set_host_byte(srb, DID_BAD_TARGET); if(likely(callback != NULL)) callback(srb); @@ -605,7 +605,7 @@ mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback if(unlikely(res)){ MTS_ERROR("error %d submitting URB\n",(int)res); - srb->result = DID_ERROR << 16; + set_host_byte(srb, DID_ERROR); if(likely(callback != NULL)) callback(srb); diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c index dd74ab7a2f9c..33ae656c4b68 100644 --- a/drivers/usb/isp1760/isp1760-hcd.c +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/mm.h> #include <linux/timer.h> #include <asm/unaligned.h> @@ -380,18 +381,15 @@ static int handshake(struct usb_hcd *hcd, u32 reg, u32 mask, u32 done, int usec) { u32 result; + int ret; + + ret = readl_poll_timeout_atomic(hcd->regs + reg, result, + ((result & mask) == done || + result == U32_MAX), 1, usec); + if (result == U32_MAX) + return -ENODEV; - do { - result = reg_read32(hcd->regs, reg); - if (result == ~0) - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + return ret; } /* reset a non-running (STS_HALT == 1) controller */ diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index a7eefe11f31a..45a387979935 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -209,6 +209,7 @@ static void adu_interrupt_out_callback(struct urb *urb) if (status != 0) { if ((status != -ENOENT) && + (status != -ESHUTDOWN) && (status != -ECONNRESET)) { dev_dbg(&dev->udev->dev, "%s :nonzero status received: %d\n", __func__, diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 36fed1a09666..c8098e9b432e 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -342,20 +342,8 @@ static struct usb_driver appledisplay_driver = { .disconnect = appledisplay_disconnect, .id_table = appledisplay_table, }; - -static int __init appledisplay_init(void) -{ - return usb_register(&appledisplay_driver); -} - -static void __exit appledisplay_exit(void) -{ - usb_deregister(&appledisplay_driver); -} +module_usb_driver(appledisplay_driver); MODULE_AUTHOR("Michael Hanselmann"); MODULE_DESCRIPTION("Apple Cinema Display driver"); MODULE_LICENSE("GPL"); - -module_init(appledisplay_init); -module_exit(appledisplay_exit); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index f922544056de..ba655b4af4fc 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -308,15 +308,9 @@ static int tower_open(struct inode *inode, struct file *file) int subminor; int retval = 0; struct usb_interface *interface; - struct tower_reset_reply *reset_reply; + struct tower_reset_reply reset_reply; int result; - reset_reply = kmalloc(sizeof(*reset_reply), GFP_KERNEL); - if (!reset_reply) { - retval = -ENOMEM; - goto exit; - } - nonseekable_open(inode, file); subminor = iminor(inode); @@ -347,15 +341,12 @@ static int tower_open(struct inode *inode, struct file *file) } /* reset the tower */ - result = usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - LEGO_USB_TOWER_REQUEST_RESET, - USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, - 0, - 0, - reset_reply, - sizeof(*reset_reply), - 1000); + result = usb_control_msg_recv(dev->udev, 0, + LEGO_USB_TOWER_REQUEST_RESET, + USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, + 0, 0, + &reset_reply, sizeof(reset_reply), 1000, + GFP_KERNEL); if (result < 0) { dev_err(&dev->udev->dev, "LEGO USB Tower reset control request failed\n"); @@ -394,7 +385,6 @@ unlock_exit: mutex_unlock(&dev->lock); exit: - kfree(reset_reply); return retval; } @@ -753,7 +743,7 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_ struct device *idev = &interface->dev; struct usb_device *udev = interface_to_usbdev(interface); struct lego_usb_tower *dev; - struct tower_get_version_reply *get_version_reply = NULL; + struct tower_get_version_reply get_version_reply; int retval = -ENOMEM; int result; @@ -798,34 +788,25 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_ dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; - get_version_reply = kmalloc(sizeof(*get_version_reply), GFP_KERNEL); - if (!get_version_reply) { - retval = -ENOMEM; - goto error; - } - /* get the firmware version and log it */ - result = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - LEGO_USB_TOWER_REQUEST_GET_VERSION, - USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, - 0, - 0, - get_version_reply, - sizeof(*get_version_reply), - 1000); - if (result != sizeof(*get_version_reply)) { - if (result >= 0) - result = -EIO; + result = usb_control_msg_recv(udev, 0, + LEGO_USB_TOWER_REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, + 0, + 0, + &get_version_reply, + sizeof(get_version_reply), + 1000, GFP_KERNEL); + if (!result) { dev_err(idev, "get version request failed: %d\n", result); retval = result; goto error; } dev_info(&interface->dev, "LEGO USB Tower firmware version is %d.%d build %d\n", - get_version_reply->major, - get_version_reply->minor, - le16_to_cpu(get_version_reply->build_no)); + get_version_reply.major, + get_version_reply.minor, + le16_to_cpu(get_version_reply.build_no)); /* we can register the device now, as it is ready */ usb_set_intfdata(interface, dev); @@ -844,11 +825,9 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_ USB_MAJOR, dev->minor); exit: - kfree(get_version_reply); return retval; error: - kfree(get_version_reply); tower_delete(dev); return retval; } diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 116bd789e568..48099c6bf04c 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -322,8 +322,7 @@ static int usb3503_platform_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int usb3503_suspend(struct usb3503 *hub) +static int __maybe_unused usb3503_suspend(struct usb3503 *hub) { usb3503_switch_mode(hub, USB3503_MODE_STANDBY); clk_disable_unprepare(hub->clk); @@ -331,7 +330,7 @@ static int usb3503_suspend(struct usb3503 *hub) return 0; } -static int usb3503_resume(struct usb3503 *hub) +static int __maybe_unused usb3503_resume(struct usb3503 *hub) { clk_prepare_enable(hub->clk); usb3503_switch_mode(hub, hub->mode); @@ -339,30 +338,29 @@ static int usb3503_resume(struct usb3503 *hub) return 0; } -static int usb3503_i2c_suspend(struct device *dev) +static int __maybe_unused usb3503_i2c_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); return usb3503_suspend(i2c_get_clientdata(client)); } -static int usb3503_i2c_resume(struct device *dev) +static int __maybe_unused usb3503_i2c_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); return usb3503_resume(i2c_get_clientdata(client)); } -static int usb3503_platform_suspend(struct device *dev) +static int __maybe_unused usb3503_platform_suspend(struct device *dev) { return usb3503_suspend(dev_get_drvdata(dev)); } -static int usb3503_platform_resume(struct device *dev) +static int __maybe_unused usb3503_platform_resume(struct device *dev) { return usb3503_resume(dev_get_drvdata(dev)); } -#endif static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend, usb3503_i2c_resume); @@ -388,7 +386,7 @@ MODULE_DEVICE_TABLE(of, usb3503_of_match); static struct i2c_driver usb3503_i2c_driver = { .driver = { .name = USB3503_I2C_NAME, - .pm = &usb3503_i2c_pm_ops, + .pm = pm_ptr(&usb3503_i2c_pm_ops), .of_match_table = of_match_ptr(usb3503_of_match), }, .probe = usb3503_i2c_probe, @@ -400,7 +398,7 @@ static struct platform_driver usb3503_platform_driver = { .driver = { .name = USB3503_I2C_NAME, .of_match_table = of_match_ptr(usb3503_of_match), - .pm = &usb3503_platform_pm_ops, + .pm = pm_ptr(&usb3503_platform_pm_ops), }, .probe = usb3503_platform_probe, .remove = usb3503_platform_remove, diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c index 1b4de651e697..2142af9bbdec 100644 --- a/drivers/usb/misc/usb4604.c +++ b/drivers/usb/misc/usb4604.c @@ -112,8 +112,7 @@ static int usb4604_i2c_probe(struct i2c_client *i2c, return usb4604_probe(hub); } -#ifdef CONFIG_PM_SLEEP -static int usb4604_i2c_suspend(struct device *dev) +static int __maybe_unused usb4604_i2c_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct usb4604 *hub = i2c_get_clientdata(client); @@ -123,7 +122,7 @@ static int usb4604_i2c_suspend(struct device *dev) return 0; } -static int usb4604_i2c_resume(struct device *dev) +static int __maybe_unused usb4604_i2c_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct usb4604 *hub = i2c_get_clientdata(client); @@ -132,7 +131,6 @@ static int usb4604_i2c_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend, usb4604_i2c_resume); @@ -154,7 +152,7 @@ MODULE_DEVICE_TABLE(of, usb4604_of_match); static struct i2c_driver usb4604_i2c_driver = { .driver = { .name = "usb4604", - .pm = &usb4604_i2c_pm_ops, + .pm = pm_ptr(&usb4604_i2c_pm_ops), .of_match_table = of_match_ptr(usb4604_of_match), }, .probe = usb4604_i2c_probe, diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 61e9e987fe4a..bb546f624a45 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -187,7 +187,6 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; default: return -ENOTTY; - break; } return 0; diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index b2e09883c7e2..e3165d79b5f6 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -96,15 +96,13 @@ static void yurex_delete(struct kref *kref) if (dev->cntl_urb) { usb_kill_urb(dev->cntl_urb); kfree(dev->cntl_req); - if (dev->cntl_buffer) - usb_free_coherent(dev->udev, YUREX_BUF_SIZE, + usb_free_coherent(dev->udev, YUREX_BUF_SIZE, dev->cntl_buffer, dev->cntl_urb->transfer_dma); usb_free_urb(dev->cntl_urb); } if (dev->urb) { usb_kill_urb(dev->urb); - if (dev->int_buffer) - usb_free_coherent(dev->udev, YUREX_BUF_SIZE, + usb_free_coherent(dev->udev, YUREX_BUF_SIZE, dev->int_buffer, dev->urb->transfer_dma); usb_free_urb(dev->urb); } diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index 71f4f02c05c6..aef0a0bba25a 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -370,12 +370,6 @@ static inline struct mtu3 *gadget_to_mtu3(struct usb_gadget *g) return container_of(g, struct mtu3, g); } -static inline int is_first_entry(const struct list_head *list, - const struct list_head *head) -{ - return list_is_last(head, list); -} - static inline struct mtu3_request *to_mtu3_request(struct usb_request *req) { return req ? container_of(req, struct mtu3_request, request) : NULL; diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 44d3cb02fa76..6d7336727388 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -1024,7 +1024,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value) case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */ case MUSB_EP0_STAGE_RX: /* control-OUT data */ csr = musb_readw(regs, MUSB_CSR0); - /* FALLTHROUGH */ + fallthrough; /* It's also OK to issue stalls during callbacks when a non-empty * DATA stage buffer has been read (or even written). diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index aa4a3140394b..4c52ba96f17e 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -518,7 +518,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, * 3. Enable AB regulators * 4. Enable USB phy * 5. Reset the musb controller - * 6. Switch the ULPI GPIO pins to fucntion mode + * 6. Switch the ULPI GPIO pins to function mode * 7. Enable the musb Peripheral5 clock * 8. Restore MUSB context */ diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index ce767ecc0636..576d925af77c 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/uaccess.h> #include <linux/device.h> #include <linux/proc_fs.h> @@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id, static int mv_otg_reset(struct mv_otg *mvotg) { - unsigned int loops; u32 tmp; + int ret; /* Stop the controller */ tmp = readl(&mvotg->op_regs->usbcmd); @@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg) /* Reset the controller to get default values */ writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd); - loops = 500; - while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) { - if (loops == 0) { - dev_err(&mvotg->pdev->dev, - "Wait for RESET completed TIMEOUT\n"); - return -ETIMEDOUT; - } - loops--; - udelay(20); + ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp, + (tmp & USBCMD_CTRL_RESET), 10, 10000); + if (ret < 0) { + dev_err(&mvotg->pdev->dev, + "Wait for RESET completed TIMEOUT\n"); + return ret; } writel(0x0, &mvotg->op_regs->usbintr); diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c index 7a14e0e3b635..0f61e328eaef 100644 --- a/drivers/usb/phy/phy-ulpi-viewport.c +++ b/drivers/usb/phy/phy-ulpi-viewport.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/usb.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -20,16 +21,9 @@ static int ulpi_viewport_wait(void __iomem *view, u32 mask) { - unsigned long usec = 2000; + u32 val; - while (usec--) { - if (!(readl(view) & mask)) - return 0; - - udelay(1); - } - - return -ETIMEDOUT; + return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000); } static int ulpi_viewport_read(struct usb_phy *otg, u32 reg) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9823bb424abd..e0f4c3d9649c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1037,6 +1037,11 @@ static const struct usb_device_id id_table_combined[] = { /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, + /* FreeCalypso USB adapters */ + { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { } /* Terminating entry */ }; @@ -1566,7 +1571,8 @@ static void ftdi_determine_type(struct usb_serial_port *port) dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, version, interfaces); if (interfaces > 1) { - int inter; + struct usb_interface *intf = serial->interface; + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; /* Multiple interfaces.*/ if (version == 0x0800) { @@ -1581,16 +1587,15 @@ static void ftdi_determine_type(struct usb_serial_port *port) priv->chip_type = FT2232C; /* Determine interface code. */ - inter = serial->interface->altsetting->desc.bInterfaceNumber; - if (inter == 0) { + if (ifnum == 0) priv->interface = INTERFACE_A; - } else if (inter == 1) { + else if (ifnum == 1) priv->interface = INTERFACE_B; - } else if (inter == 2) { + else if (ifnum == 2) priv->interface = INTERFACE_C; - } else if (inter == 3) { + else if (ifnum == 3) priv->interface = INTERFACE_D; - } + /* BM-type devices have a bug where bcdDevice gets set * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { @@ -2330,12 +2335,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial) */ static int ftdi_jtag_probe(struct usb_serial *serial) { - struct usb_device *udev = serial->dev; - struct usb_interface *interface = serial->interface; + struct usb_interface *intf = serial->interface; + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - if (interface == udev->actconfig->interface[0]) { - dev_info(&udev->dev, - "Ignoring serial port reserved for JTAG\n"); + if (ifnum == 0) { + dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n"); return -ENODEV; } @@ -2367,12 +2371,11 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) */ static int ftdi_stmclite_probe(struct usb_serial *serial) { - struct usb_device *udev = serial->dev; - struct usb_interface *interface = serial->interface; + struct usb_interface *intf = serial->interface; + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - if (interface == udev->actconfig->interface[0] || - interface == udev->actconfig->interface[1]) { - dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + if (ifnum < 2) { + dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n"); return -ENODEV; } diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index b5ca17a5967a..3d47c6d72256 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,13 @@ #define FTDI_LUMEL_PD12_PID 0x6002 +/* + * Custom USB adapters made by Falconia Partners LLC + * for FreeCalypso project, ID codes allocated to Falconia by FTDI. + */ +#define FTDI_FALCONIA_JTAG_BUF_PID 0x7150 +#define FTDI_FALCONIA_JTAG_UNBUF_PID 0x7151 + /* Sienna Serial Interface by Secyourit GmbH */ #define FTDI_SIENNA_PID 0x8348 diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 2ec4eeacebc7..5eed1078fac8 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -282,11 +282,12 @@ static void destroy_urbtracker(struct kref *kref) * port callback had to be deferred because the disconnect mutex could not be * obtained at the time. */ -static void send_deferred_urbs(unsigned long _mos_parport) +static void send_deferred_urbs(struct tasklet_struct *t) { int ret_val; unsigned long flags; - struct mos7715_parport *mos_parport = (void *)_mos_parport; + struct mos7715_parport *mos_parport = from_tasklet(mos_parport, t, + urb_tasklet); struct urbtracker *urbtrack, *tmp; struct list_head *cursor, *next; struct device *dev; @@ -716,8 +717,7 @@ static int mos7715_parport_init(struct usb_serial *serial) INIT_LIST_HEAD(&mos_parport->deferred_urbs); usb_set_serial_data(serial, mos_parport); /* hijack private pointer */ mos_parport->serial = serial; - tasklet_init(&mos_parport->urb_tasklet, send_deferred_urbs, - (unsigned long) mos_parport); + tasklet_setup(&mos_parport->urb_tasklet, send_deferred_urbs); init_completion(&mos_parport->syncmsg_compl); /* cycle parallel port reset bit */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0c6f160a214a..2a3bfd6f867e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -528,6 +528,7 @@ static void option_instat_callback(struct urb *urb); /* Cellient products */ #define CELLIENT_VENDOR_ID 0x2692 #define CELLIENT_PRODUCT_MEN200 0x9005 +#define CELLIENT_PRODUCT_MPL200 0x9025 /* Hyundai Petatel Inc. products */ #define PETATEL_VENDOR_ID 0x1ff4 @@ -1186,6 +1187,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff), /* Telit FN980 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1054, 0xff), /* Telit FT980-KS */ + .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), @@ -1982,6 +1985,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, + { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200), + .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) }, { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) }, { USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) }, /* TP-Link LTE Module */ diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 048452d8a4a4..be8067017eaa 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -100,6 +100,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 7d3090ee7e0c..0f681ddbfd28 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -127,6 +127,7 @@ /* Hewlett-Packard POS Pole Displays */ #define HP_VENDOR_ID 0x03f0 +#define HP_LD381GC_PRODUCT_ID 0x0183 #define HP_LM920_PRODUCT_ID 0x026b #define HP_TD620_PRODUCT_ID 0x0956 #define HP_LD960_PRODUCT_ID 0x0b39 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index c8d1ea0e6e6f..83da8236e3c8 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -243,11 +243,11 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* QDL mode */ /* Gobi 2000 has a single altsetting, older ones have two */ if (serial->interface->num_altsetting == 2) - intf = &serial->interface->altsetting[1]; + intf = usb_altnum_to_altsetting(serial->interface, 1); else if (serial->interface->num_altsetting > 2) goto done; - if (intf->desc.bNumEndpoints == 2 && + if (intf && intf->desc.bNumEndpoints == 2 && usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) && usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { dev_dbg(dev, "QDL port found\n"); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 89f5e33a6e6d..3c76336e43bb 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1383,7 +1383,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; isd200_srb_set_bufflen(srb, 0); } else { - usb_stor_dbg(us, " Not removeable media, just report okay\n"); + usb_stor_dbg(us, " Not removable media, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index e5a971b83e3f..560efd1479ba 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -92,7 +92,7 @@ static int slave_alloc (struct scsi_device *sdev) static int slave_configure(struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); - struct device *dev = us->pusb_dev->bus->sysdev; + struct device *dev = sdev->host->dma_dev; /* * Many devices have trouble transferring more than 32KB at a time, diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 8183504e3abb..c8a577309e8f 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -279,17 +279,17 @@ static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd * switch (response_code) { case RC_INCORRECT_LUN: - cmnd->result = DID_BAD_TARGET << 16; + set_host_byte(cmnd, DID_BAD_TARGET); break; case RC_TMF_SUCCEEDED: - cmnd->result = DID_OK << 16; + set_host_byte(cmnd, DID_OK); break; case RC_TMF_NOT_SUPPORTED: - cmnd->result = DID_TARGET_FAILURE << 16; + set_host_byte(cmnd, DID_TARGET_FAILURE); break; default: uas_log_cmd_state(cmnd, "response iu", response_code); - cmnd->result = DID_ERROR << 16; + set_host_byte(cmnd, DID_ERROR); break; } @@ -660,7 +660,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, spin_lock_irqsave(&devinfo->lock, flags); if (devinfo->resetting) { - cmnd->result = DID_ERROR << 16; + set_host_byte(cmnd, DID_ERROR); cmnd->scsi_done(cmnd); goto zombie; } @@ -704,7 +704,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, * of queueing, no matter how fatal the error */ if (err == -ENODEV) { - cmnd->result = DID_ERROR << 16; + set_host_byte(cmnd, DID_ERROR); cmnd->scsi_done(cmnd); goto zombie; } @@ -837,17 +837,24 @@ static int uas_slave_alloc(struct scsi_device *sdev) */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); - if (devinfo->flags & US_FL_MAX_SECTORS_64) - blk_queue_max_hw_sectors(sdev->request_queue, 64); - else if (devinfo->flags & US_FL_MAX_SECTORS_240) - blk_queue_max_hw_sectors(sdev->request_queue, 240); - return 0; } static int uas_slave_configure(struct scsi_device *sdev) { struct uas_dev_info *devinfo = sdev->hostdata; + struct device *dev = sdev->host->dma_dev; + + if (devinfo->flags & US_FL_MAX_SECTORS_64) + blk_queue_max_hw_sectors(sdev->request_queue, 64); + else if (devinfo->flags & US_FL_MAX_SECTORS_240) + blk_queue_max_hw_sectors(sdev->request_queue, 240); + else if (devinfo->udev->speed >= USB_SPEED_SUPER) + blk_queue_max_hw_sectors(sdev->request_queue, 2048); + + blk_queue_max_hw_sectors(sdev->request_queue, + min_t(size_t, queue_max_hw_sectors(sdev->request_queue), + dma_max_mapping_size(dev) >> SECTOR_SHIFT)); if (devinfo->flags & US_FL_NO_REPORT_OPCODES) sdev->no_report_opcodes = 1; @@ -1033,7 +1040,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) shost->can_queue = devinfo->qdepth - 2; usb_set_intfdata(intf, shost); - result = scsi_add_host(shost, &intf->dev); + result = scsi_add_host_with_dma(shost, &intf->dev, udev->bus->sysdev); if (result) goto free_streams; diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 94a64729dc27..c2ef367cf257 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -1049,8 +1049,9 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; usb_autopm_get_interface_no_resume(us->pusb_intf); snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", - dev_name(&us->pusb_intf->dev)); - result = scsi_add_host(us_to_host(us), dev); + dev_name(dev)); + result = scsi_add_host_with_dma(us_to_host(us), dev, + us->pusb_dev->bus->sysdev); if (result) { dev_warn(dev, "Unable to add the scsi host\n"); diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 559dd06117e7..6c5908a37ee8 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -73,6 +73,30 @@ config TYPEC_TPS6598X If you choose to build this driver as a dynamically linked module, the module will be called tps6598x.ko. +config TYPEC_STUSB160X + tristate "STMicroelectronics STUSB160x Type-C controller driver" + depends on I2C + depends on REGMAP_I2C + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH + help + Say Y or M here if your system has STMicroelectronics STUSB160x + Type-C port controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called stusb160x.ko. + +config TYPEC_QCOM_PMIC + tristate "Qualcomm PMIC USB Type-C driver" + depends on ARCH_QCOM || COMPILE_TEST + help + Driver for supporting role switch over the Qualcomm PMIC. This will + handle the USB Type-C role and orientation detection reported by the + QCOM PMIC if the PMIC has the capability to handle USB Type-C + detection. + + It will also enable the VBUS output to connected devices when a + DFP connection is made. + source "drivers/usb/typec/mux/Kconfig" source "drivers/usb/typec/altmodes/Kconfig" diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 7753a5c3cd46..d03b48c4b864 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -6,4 +6,6 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ obj-$(CONFIG_TYPEC_UCSI) += ucsi/ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o +obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o +obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 7b20073d7fc0..e62e5e3da01e 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -190,7 +190,7 @@ static void dp_altmode_work(struct work_struct *work) switch (dp->state) { case DP_STATE_ENTER: ret = typec_altmode_enter(dp->alt, NULL); - if (ret) + if (ret && ret != -EBUSY) dev_err(&dp->alt->dev, "failed to enter mode\n"); break; case DP_STATE_UPDATE: diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 02655694f200..35eec707cb51 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1449,6 +1449,21 @@ void typec_set_pwr_opmode(struct typec_port *port, EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); /** + * typec_find_pwr_opmode - Get the typec power operation mode capability + * @name: power operation mode string + * + * This routine is used to find the typec_pwr_opmode by its string @name. + * + * Returns typec_pwr_opmode if success, otherwise negative error code. + */ +int typec_find_pwr_opmode(const char *name) +{ + return match_string(typec_pwr_opmodes, + ARRAY_SIZE(typec_pwr_opmodes), name); +} +EXPORT_SYMBOL_GPL(typec_find_pwr_opmode); + +/** * typec_find_orientation - Convert orientation string to enum typec_orientation * @name: Orientation string * diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c index 323dfa8160ab..f633ec15b1a1 100644 --- a/drivers/usb/typec/hd3ss3220.c +++ b/drivers/usb/typec/hd3ss3220.c @@ -155,7 +155,7 @@ static int hd3ss3220_probe(struct i2c_client *client, { struct typec_capability typec_cap = { }; struct hd3ss3220 *hd3ss3220; - struct fwnode_handle *connector; + struct fwnode_handle *connector, *ep; int ret; unsigned int data; @@ -173,11 +173,21 @@ static int hd3ss3220_probe(struct i2c_client *client, hd3ss3220_set_source_pref(hd3ss3220, HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); + /* For backward compatibility check the connector child node first */ connector = device_get_named_child_node(hd3ss3220->dev, "connector"); - if (!connector) - return -ENODEV; + if (connector) { + hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector); + } else { + ep = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), NULL); + if (!ep) + return -ENODEV; + connector = fwnode_graph_get_remote_port_parent(ep); + fwnode_handle_put(ep); + if (!connector) + return -ENODEV; + hd3ss3220->role_sw = usb_role_switch_get(hd3ss3220->dev); + } - hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector); if (IS_ERR(hd3ss3220->role_sw)) { ret = PTR_ERR(hd3ss3220->role_sw); goto err_put_fwnode; diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index a4dbd11f8ee2..edead555835e 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -11,6 +11,7 @@ config TYPEC_MUX_PI3USB30532 config TYPEC_MUX_INTEL_PMC tristate "Intel PMC mux control" + depends on ACPI depends on INTEL_SCU_IPC select USB_ROLE_SWITCH help diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 676b525c2a66..d7f63b74c6b1 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -80,10 +80,48 @@ enum { #define PMC_USB_DP_HPD_LVL BIT(4) #define PMC_USB_DP_HPD_IRQ BIT(5) +/* + * Input Output Manager (IOM) PORT STATUS + */ +#define IOM_PORT_STATUS_OFFSET 0x560 + +#define IOM_PORT_STATUS_ACTIVITY_TYPE_MASK GENMASK(9, 6) +#define IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT 6 +#define IOM_PORT_STATUS_ACTIVITY_TYPE_USB 0x03 +/* activity type: Safe Mode */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_SAFE_MODE 0x04 +/* activity type: Display Port */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP 0x05 +/* activity type: Display Port Multi Function Device */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP_MFD 0x06 +/* activity type: Thunderbolt */ +#define IOM_PORT_STATUS_ACTIVITY_TYPE_TBT 0x07 +#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_USB 0x0c +#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_TBT_USB 0x0d +/* Upstream Facing Port Information */ +#define IOM_PORT_STATUS_UFP BIT(10) +/* Display Port Hot Plug Detect status */ +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK GENMASK(13, 12) +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT 12 +#define IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT 0x01 +#define IOM_PORT_STATUS_DHPD_HPD_SOURCE_TBT BIT(14) +#define IOM_PORT_STATUS_CONNECTED BIT(31) + +#define IOM_PORT_ACTIVITY_IS(_status_, _type_) \ + ((((_status_) & IOM_PORT_STATUS_ACTIVITY_TYPE_MASK) >> \ + IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT) == \ + (IOM_PORT_STATUS_ACTIVITY_TYPE_##_type_)) + +#define IOM_PORT_HPD_ASSERTED(_status_) \ + ((((_status_) & IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK) >> \ + IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT) & \ + IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT) + struct pmc_usb; struct pmc_usb_port { int num; + u32 iom_status; struct pmc_usb *pmc; struct typec_mux *typec_mux; struct typec_switch *typec_sw; @@ -104,8 +142,21 @@ struct pmc_usb { struct device *dev; struct intel_scu_ipc_dev *ipc; struct pmc_usb_port *port; + struct acpi_device *iom_adev; + void __iomem *iom_base; }; +static void update_port_status(struct pmc_usb_port *port) +{ + u8 port_num; + + /* SoC expects the USB Type-C port numbers to start with 0 */ + port_num = port->usb3_port - 1; + + port->iom_status = readl(port->pmc->iom_base + IOM_PORT_STATUS_OFFSET + + port_num * sizeof(u32)); +} + static int sbu_orientation(struct pmc_usb_port *port) { if (port->sbu_orientation) @@ -148,18 +199,17 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len) } static int -pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state) +pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp) { - struct typec_displayport_data *data = state->data; u8 msg[2] = { }; msg[0] = PMC_USB_DP_HPD; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; - if (data->status & DP_STATUS_IRQ_HPD) + if (dp->status & DP_STATUS_IRQ_HPD) msg[1] = PMC_USB_DP_HPD_IRQ; - if (data->status & DP_STATUS_HPD_STATE) + if (dp->status & DP_STATUS_HPD_STATE) msg[1] |= PMC_USB_DP_HPD_LVL; return pmc_usb_command(port, msg, sizeof(msg)); @@ -172,8 +222,15 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) struct altmode_req req = { }; int ret; - if (data->status & DP_STATUS_IRQ_HPD) - return pmc_usb_mux_dp_hpd(port, state); + if (IOM_PORT_ACTIVITY_IS(port->iom_status, DP) || + IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) { + if (IOM_PORT_HPD_ASSERTED(port->iom_status) && + (!(data->status & DP_STATUS_IRQ_HPD) && + data->status & DP_STATUS_HPD_STATE)) + return 0; + + return pmc_usb_mux_dp_hpd(port, state->data); + } req.usage = PMC_USB_ALT_MODE; req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; @@ -189,8 +246,8 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) if (ret) return ret; - if (data->status & DP_STATUS_HPD_STATE) - return pmc_usb_mux_dp_hpd(port, state); + if (data->status & (DP_STATUS_IRQ_HPD | DP_STATUS_HPD_STATE)) + return pmc_usb_mux_dp_hpd(port, state->data); return 0; } @@ -202,6 +259,10 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state) u8 cable_speed = TBT_CABLE_SPEED(data->cable_mode); struct altmode_req req = { }; + if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) || + IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) + return 0; + req.usage = PMC_USB_ALT_MODE; req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT; @@ -233,6 +294,10 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state) struct altmode_req req = { }; u8 cable_speed; + if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) || + IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) + return 0; + req.usage = PMC_USB_ALT_MODE; req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT; @@ -267,34 +332,61 @@ static int pmc_usb_mux_safe_state(struct pmc_usb_port *port) { u8 msg; + if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE)) + return 0; + msg = PMC_USB_SAFE_MODE; msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; return pmc_usb_command(port, &msg, sizeof(msg)); } -static int pmc_usb_connect(struct pmc_usb_port *port) +static int pmc_usb_disconnect(struct pmc_usb_port *port) { + struct typec_displayport_data data = { }; u8 msg[2]; - msg[0] = PMC_USB_CONNECT; + if (!(port->iom_status & IOM_PORT_STATUS_CONNECTED)) + return 0; + + /* Clear DisplayPort HPD if it's still asserted. */ + if (IOM_PORT_HPD_ASSERTED(port->iom_status)) + pmc_usb_mux_dp_hpd(port, &data); + + msg[0] = PMC_USB_DISCONNECT; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT; - msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT; - msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT; return pmc_usb_command(port, msg, sizeof(msg)); } -static int pmc_usb_disconnect(struct pmc_usb_port *port) +static int pmc_usb_connect(struct pmc_usb_port *port, enum usb_role role) { + u8 ufp = role == USB_ROLE_DEVICE ? 1 : 0; u8 msg[2]; + int ret; - msg[0] = PMC_USB_DISCONNECT; + if (port->orientation == TYPEC_ORIENTATION_NONE) + return -EINVAL; + + if (port->iom_status & IOM_PORT_STATUS_CONNECTED) { + if (port->role == role || port->role == USB_ROLE_NONE) + return 0; + + /* Role swap */ + ret = pmc_usb_disconnect(port); + if (ret) + return ret; + } + + msg[0] = PMC_USB_CONNECT; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT; + msg[1] |= ufp << PMC_USB_MSG_UFP_SHIFT; + msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT; + msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT; return pmc_usb_command(port, msg, sizeof(msg)); } @@ -304,13 +396,15 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state) { struct pmc_usb_port *port = typec_mux_get_drvdata(mux); + update_port_status(port); + if (port->orientation == TYPEC_ORIENTATION_NONE || port->role == USB_ROLE_NONE) return 0; if (state->mode == TYPEC_STATE_SAFE) return pmc_usb_mux_safe_state(port); if (state->mode == TYPEC_STATE_USB) - return pmc_usb_connect(port); + return pmc_usb_connect(port, port->role); if (state->alt) { switch (state->alt->svid) { @@ -325,7 +419,7 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state) /* REVISIT: Try with usb3_port set to 0? */ break; case TYPEC_MODE_USB3: - return pmc_usb_connect(port); + return pmc_usb_connect(port, port->role); case TYPEC_MODE_USB4: return pmc_usb_mux_usb4(port, state); } @@ -339,38 +433,28 @@ static int pmc_usb_set_orientation(struct typec_switch *sw, { struct pmc_usb_port *port = typec_switch_get_drvdata(sw); - if (port->orientation == orientation) - return 0; + update_port_status(port); port->orientation = orientation; - if (port->role) { - if (orientation == TYPEC_ORIENTATION_NONE) - return pmc_usb_disconnect(port); - else - return pmc_usb_connect(port); - } - return 0; } static int pmc_usb_set_role(struct usb_role_switch *sw, enum usb_role role) { struct pmc_usb_port *port = usb_role_switch_get_drvdata(sw); + int ret; - if (port->role == role) - return 0; + update_port_status(port); - port->role = role; + if (role == USB_ROLE_NONE) + ret = pmc_usb_disconnect(port); + else + ret = pmc_usb_connect(port, role); - if (port->orientation) { - if (role == USB_ROLE_NONE) - return pmc_usb_disconnect(port); - else - return pmc_usb_connect(port); - } + port->role = role; - return 0; + return ret; } static int pmc_usb_register_port(struct pmc_usb *pmc, int index, @@ -444,6 +528,45 @@ err_unregister_switch: return ret; } +static int is_memory(struct acpi_resource *res, void *data) +{ + struct resource r; + + return !acpi_dev_resource_memory(res, &r); +} + +static int pmc_usb_probe_iom(struct pmc_usb *pmc) +{ + struct list_head resource_list; + struct resource_entry *rentry; + struct acpi_device *adev; + int ret; + + adev = acpi_dev_get_first_match_dev("INTC1072", NULL, -1); + if (!adev) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL); + if (ret < 0) + return ret; + + rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node); + if (rentry) + pmc->iom_base = devm_ioremap_resource(pmc->dev, rentry->res); + + acpi_dev_free_resource_list(&resource_list); + + if (!pmc->iom_base) { + put_device(&adev->dev); + return -ENOMEM; + } + + pmc->iom_adev = adev; + + return 0; +} + static int pmc_usb_probe(struct platform_device *pdev) { struct fwnode_handle *fwnode = NULL; @@ -458,6 +581,12 @@ static int pmc_usb_probe(struct platform_device *pdev) device_for_each_child_node(&pdev->dev, fwnode) pmc->num_ports++; + /* The IOM microcontroller has a limitation of max 4 ports. */ + if (pmc->num_ports > 4) { + dev_err(&pdev->dev, "driver limited to 4 ports\n"); + return -ERANGE; + } + pmc->port = devm_kcalloc(&pdev->dev, pmc->num_ports, sizeof(struct pmc_usb_port), GFP_KERNEL); if (!pmc->port) @@ -469,6 +598,10 @@ static int pmc_usb_probe(struct platform_device *pdev) pmc->dev = &pdev->dev; + ret = pmc_usb_probe_iom(pmc); + if (ret) + return ret; + /* * For every physical USB connector (USB2 and USB3 combo) there is a * child ACPI device node under the PMC mux ACPI device object. @@ -494,6 +627,8 @@ err_remove_ports: usb_role_switch_unregister(pmc->port[i].usb_sw); } + put_device(&pmc->iom_adev->dev); + return ret; } @@ -508,6 +643,8 @@ static int pmc_usb_remove(struct platform_device *pdev) usb_role_switch_unregister(pmc->port[i].usb_sw); } + put_device(&pmc->iom_adev->dev); + return 0; } diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c new file mode 100644 index 000000000000..a0454a80c4a2 --- /dev/null +++ b/drivers/usb/typec/qcom-pmic-typec.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/role.h> +#include <linux/usb/typec_mux.h> + +#define TYPEC_MISC_STATUS 0xb +#define CC_ATTACHED BIT(0) +#define CC_ORIENTATION BIT(1) +#define SNK_SRC_MODE BIT(6) +#define TYPEC_MODE_CFG 0x44 +#define TYPEC_DISABLE_CMD BIT(0) +#define EN_SNK_ONLY BIT(1) +#define EN_SRC_ONLY BIT(2) +#define TYPEC_VCONN_CONTROL 0x46 +#define VCONN_EN_SRC BIT(0) +#define VCONN_EN_VAL BIT(1) +#define TYPEC_EXIT_STATE_CFG 0x50 +#define SEL_SRC_UPPER_REF BIT(2) +#define TYPEC_INTR_EN_CFG_1 0x5e +#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0) + +struct qcom_pmic_typec { + struct device *dev; + struct regmap *regmap; + u32 base; + + struct typec_port *port; + struct usb_role_switch *role_sw; + + struct regulator *vbus_reg; + bool vbus_enabled; +}; + +static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec + *qcom_usb, bool enable) +{ + int ret; + + if (enable == qcom_usb->vbus_enabled) + return; + + if (enable) { + ret = regulator_enable(qcom_usb->vbus_reg); + if (ret) + return; + } else { + ret = regulator_disable(qcom_usb->vbus_reg); + if (ret) + return; + } + qcom_usb->vbus_enabled = enable; +} + +static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb) +{ + enum typec_orientation orientation; + enum usb_role role; + unsigned int stat; + bool enable_vbus; + + regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS, + &stat); + + if (stat & CC_ATTACHED) { + orientation = (stat & CC_ORIENTATION) ? + TYPEC_ORIENTATION_REVERSE : + TYPEC_ORIENTATION_NORMAL; + typec_set_orientation(qcom_usb->port, orientation); + + role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE; + if (role == USB_ROLE_HOST) + enable_vbus = true; + else + enable_vbus = false; + } else { + role = USB_ROLE_NONE; + enable_vbus = false; + } + + qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus); + usb_role_switch_set_role(qcom_usb->role_sw, role); +} + +static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb) +{ + struct qcom_pmic_typec *qcom_usb = _qcom_usb; + + qcom_pmic_typec_check_connection(qcom_usb); + return IRQ_HANDLED; +} + +static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb, + enum typec_port_type type) +{ + u8 mode = 0; + + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_INTR_EN_CFG_1, + TYPEC_INTR_EN_CFG_1_MASK, 0); + + if (type == TYPEC_PORT_SRC) + mode = EN_SRC_ONLY; + else if (type == TYPEC_PORT_SNK) + mode = EN_SNK_ONLY; + + regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG, + EN_SNK_ONLY | EN_SRC_ONLY, mode); + + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_VCONN_CONTROL, + VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC); + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_EXIT_STATE_CFG, + SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF); +} + +static int qcom_pmic_typec_probe(struct platform_device *pdev) +{ + struct qcom_pmic_typec *qcom_usb; + struct device *dev = &pdev->dev; + struct fwnode_handle *fwnode; + struct typec_capability cap; + const char *buf; + int ret, irq, role; + u32 reg; + + ret = device_property_read_u32(dev, "reg", ®); + if (ret < 0) { + dev_err(dev, "missing base address\n"); + return ret; + } + + qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL); + if (!qcom_usb) + return -ENOMEM; + + qcom_usb->dev = dev; + qcom_usb->base = reg; + + qcom_usb->regmap = dev_get_regmap(dev->parent, NULL); + if (!qcom_usb->regmap) { + dev_err(dev, "Failed to get regmap\n"); + return -EINVAL; + } + + qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus"); + if (IS_ERR(qcom_usb->vbus_reg)) + return PTR_ERR(qcom_usb->vbus_reg); + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return -EINVAL; + + ret = fwnode_property_read_string(fwnode, "power-role", &buf); + if (!ret) { + role = typec_find_port_power_role(buf); + if (role < 0) + role = TYPEC_PORT_SNK; + } else { + role = TYPEC_PORT_SNK; + } + cap.type = role; + + ret = fwnode_property_read_string(fwnode, "data-role", &buf); + if (!ret) { + role = typec_find_port_data_role(buf); + if (role < 0) + role = TYPEC_PORT_UFP; + } else { + role = TYPEC_PORT_UFP; + } + cap.data = role; + + cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + cap.fwnode = fwnode; + qcom_usb->port = typec_register_port(dev, &cap); + if (IS_ERR(qcom_usb->port)) { + ret = PTR_ERR(qcom_usb->port); + dev_err(dev, "Failed to register type c port %d\n", ret); + goto err_put_node; + } + fwnode_handle_put(fwnode); + + qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev)); + if (IS_ERR(qcom_usb->role_sw)) { + if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER) + dev_err(dev, "failed to get role switch\n"); + ret = PTR_ERR(qcom_usb->role_sw); + goto err_typec_port; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + goto err_usb_role_sw; + + ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL, + qcom_pmic_typec_interrupt, IRQF_ONESHOT, + "qcom-pmic-typec", qcom_usb); + if (ret) { + dev_err(&pdev->dev, "Could not request IRQ\n"); + goto err_usb_role_sw; + } + + platform_set_drvdata(pdev, qcom_usb); + qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type); + qcom_pmic_typec_check_connection(qcom_usb); + + return 0; + +err_usb_role_sw: + usb_role_switch_put(qcom_usb->role_sw); +err_typec_port: + typec_unregister_port(qcom_usb->port); +err_put_node: + fwnode_handle_put(fwnode); + + return ret; +} + +static int qcom_pmic_typec_remove(struct platform_device *pdev) +{ + struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev); + + usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE); + qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0); + + typec_unregister_port(qcom_usb->port); + usb_role_switch_put(qcom_usb->role_sw); + + return 0; +} + +static const struct of_device_id qcom_pmic_typec_table[] = { + { .compatible = "qcom,pm8150b-usb-typec" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table); + +static struct platform_driver qcom_pmic_typec = { + .driver = { + .name = "qcom,pmic-typec", + .of_match_table = qcom_pmic_typec_table, + }, + .probe = qcom_pmic_typec_probe, + .remove = qcom_pmic_typec_remove, +}; +module_platform_driver(qcom_pmic_typec); + +MODULE_DESCRIPTION("QCOM PMIC USB type C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c new file mode 100644 index 000000000000..ce0bd7b3ad88 --- /dev/null +++ b/drivers/usb/typec/stusb160x.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STUSB160x Type-C controller family driver + * + * Copyright (C) 2020, STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com> + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/role.h> +#include <linux/usb/typec.h> + +#define STUSB160X_ALERT_STATUS 0x0B /* RC */ +#define STUSB160X_ALERT_STATUS_MASK_CTRL 0x0C /* RW */ +#define STUSB160X_CC_CONNECTION_STATUS_TRANS 0x0D /* RC */ +#define STUSB160X_CC_CONNECTION_STATUS 0x0E /* RO */ +#define STUSB160X_MONITORING_STATUS_TRANS 0x0F /* RC */ +#define STUSB160X_MONITORING_STATUS 0x10 /* RO */ +#define STUSB160X_CC_OPERATION_STATUS 0x11 /* RO */ +#define STUSB160X_HW_FAULT_STATUS_TRANS 0x12 /* RC */ +#define STUSB160X_HW_FAULT_STATUS 0x13 /* RO */ +#define STUSB160X_CC_CAPABILITY_CTRL 0x18 /* RW */ +#define STUSB160X_CC_VCONN_SWITCH_CTRL 0x1E /* RW */ +#define STUSB160X_VCONN_MONITORING_CTRL 0x20 /* RW */ +#define STUSB160X_VBUS_MONITORING_RANGE_CTRL 0x22 /* RW */ +#define STUSB160X_RESET_CTRL 0x23 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL 0x25 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_STATUS 0x26 /* RO */ +#define STUSB160X_VBUS_ENABLE_STATUS 0x27 /* RO */ +#define STUSB160X_CC_POWER_MODE_CTRL 0x28 /* RW */ +#define STUSB160X_VBUS_MONITORING_CTRL 0x2E /* RW */ +#define STUSB1600_REG_MAX 0x2F /* RO - Reserved */ + +/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */ +#define STUSB160X_HW_FAULT BIT(4) +#define STUSB160X_MONITORING BIT(5) +#define STUSB160X_CC_CONNECTION BIT(6) +#define STUSB160X_ALL_ALERTS GENMASK(6, 4) + +/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */ +#define STUSB160X_CC_ATTACH_TRANS BIT(0) + +/* STUSB160X_CC_CONNECTION_STATUS bitfields */ +#define STUSB160X_CC_ATTACH BIT(0) +#define STUSB160X_CC_VCONN_SUPPLY BIT(1) +#define STUSB160X_CC_DATA_ROLE(s) (!!((s) & BIT(2))) +#define STUSB160X_CC_POWER_ROLE(s) (!!((s) & BIT(3))) +#define STUSB160X_CC_ATTACHED_MODE GENMASK(7, 5) + +/* STUSB160X_MONITORING_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_PRESENCE_TRANS BIT(0) +#define STUSB160X_VBUS_PRESENCE_TRANS BIT(1) +#define STUSB160X_VBUS_VSAFE0V_TRANS BIT(2) +#define STUSB160X_VBUS_VALID_TRANS BIT(3) + +/* STUSB160X_MONITORING_STATUS bitfields */ +#define STUSB160X_VCONN_PRESENCE BIT(0) +#define STUSB160X_VBUS_PRESENCE BIT(1) +#define STUSB160X_VBUS_VSAFE0V BIT(2) +#define STUSB160X_VBUS_VALID BIT(3) + +/* STUSB160X_CC_OPERATION_STATUS bitfields */ +#define STUSB160X_TYPEC_FSM_STATE GENMASK(4, 0) +#define STUSB160X_SINK_POWER_STATE GENMASK(6, 5) +#define STUSB160X_CC_ATTACHED BIT(7) + +/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS BIT(0) +#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS BIT(1) +#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS BIT(2) +#define STUSB160X_VPU_VALID_TRANS BIT(4) +#define STUSB160X_VPU_OVP_FAULT_TRANS BIT(5) +#define STUSB160X_THERMAL_FAULT BIT(7) + +/* STUSB160X_HW_FAULT_STATUS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_CC2 BIT(0) +#define STUSB160X_VCONN_SW_OVP_FAULT_CC1 BIT(1) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC2 BIT(2) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC1 BIT(3) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC2 BIT(4) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC1 BIT(5) +#define STUSB160X_VPU_VALID BIT(6) +#define STUSB160X_VPU_OVP_FAULT BIT(7) + +/* STUSB160X_CC_CAPABILITY_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SUPPLY_EN BIT(0) +#define STUSB160X_CC_VCONN_DISCHARGE_EN BIT(4) +#define STUSB160X_CC_CURRENT_ADVERTISED GENMASK(7, 6) + +/* STUSB160X_VCONN_SWITCH_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SWITCH_ILIM GENMASK(3, 0) + +/* STUSB160X_VCONN_MONITORING_CTRL bitfields */ +#define STUSB160X_VCONN_UVLO_THRESHOLD BIT(6) +#define STUSB160X_VCONN_MONITORING_EN BIT(7) + +/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */ +#define STUSB160X_SHIFT_LOW_VBUS_LIMIT GENMASK(3, 0) +#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT GENMASK(7, 4) + +/* STUSB160X_RESET_CTRL bitfields */ +#define STUSB160X_SW_RESET_EN BIT(0) + +/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */ +#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO GENMASK(3, 0) +#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V GENMASK(7, 4) + +/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */ +#define STUSB160X_VBUS_DISCHARGE_EN BIT(7) + +/* STUSB160X_VBUS_ENABLE_STATUS bitfields */ +#define STUSB160X_VBUS_SOURCE_EN BIT(0) +#define STUSB160X_VBUS_SINK_EN BIT(1) + +/* STUSB160X_CC_POWER_MODE_CTRL bitfields */ +#define STUSB160X_CC_POWER_MODE GENMASK(2, 0) + +/* STUSB160X_VBUS_MONITORING_CTRL bitfields */ +#define STUSB160X_VDD_UVLO_DISABLE BIT(0) +#define STUSB160X_VBUS_VSAFE0V_THRESHOLD GENMASK(2, 1) +#define STUSB160X_VBUS_RANGE_DISABLE BIT(4) +#define STUSB160X_VDD_OVLO_DISABLE BIT(6) + +enum stusb160x_pwr_mode { + SOURCE_WITH_ACCESSORY, + SINK_WITH_ACCESSORY, + SINK_WITHOUT_ACCESSORY, + DUAL_WITH_ACCESSORY, + DUAL_WITH_ACCESSORY_AND_TRY_SRC, + DUAL_WITH_ACCESSORY_AND_TRY_SNK, +}; + +enum stusb160x_attached_mode { + NO_DEVICE_ATTACHED, + SINK_ATTACHED, + SOURCE_ATTACHED, + DEBUG_ACCESSORY_ATTACHED, + AUDIO_ACCESSORY_ATTACHED, +}; + +struct stusb160x { + struct device *dev; + struct regmap *regmap; + struct regulator *vdd_supply; + struct regulator *vsys_supply; + struct regulator *vconn_supply; + struct regulator *main_supply; + + struct typec_port *port; + struct typec_capability capability; + struct typec_partner *partner; + + enum typec_port_type port_type; + enum typec_pwr_opmode pwr_opmode; + bool vbus_on; + + struct usb_role_switch *role_sw; +}; + +static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS_MASK_CTRL: + case STUSB160X_CC_CAPABILITY_CTRL: + case STUSB160X_CC_VCONN_SWITCH_CTRL: + case STUSB160X_VCONN_MONITORING_CTRL: + case STUSB160X_VBUS_MONITORING_RANGE_CTRL: + case STUSB160X_RESET_CTRL: + case STUSB160X_VBUS_DISCHARGE_TIME_CTRL: + case STUSB160X_CC_POWER_MODE_CTRL: + case STUSB160X_VBUS_MONITORING_CTRL: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_readable(struct device *dev, unsigned int reg) +{ + if (reg <= 0x0A || + (reg >= 0x14 && reg <= 0x17) || + (reg >= 0x19 && reg <= 0x1D) || + (reg >= 0x29 && reg <= 0x2D) || + (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F)) + return false; + else + return true; +} + +static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_CC_CONNECTION_STATUS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS: + case STUSB160X_CC_OPERATION_STATUS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS: + case STUSB160X_VBUS_DISCHARGE_STATUS: + case STUSB160X_VBUS_ENABLE_STATUS: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + return true; + default: + return false; + } +} + +static const struct regmap_config stusb1600_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = STUSB1600_REG_MAX, + .writeable_reg = stusb160x_reg_writeable, + .readable_reg = stusb160x_reg_readable, + .volatile_reg = stusb160x_reg_volatile, + .precious_reg = stusb160x_reg_precious, + .cache_type = REGCACHE_RBTREE, +}; + +static bool stusb160x_get_vconn(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret); + return false; + } + + return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val); +} + +static int stusb160x_set_vconn(struct stusb160x *chip, bool on) +{ + int ret; + + /* Manage VCONN input supply */ + if (chip->vconn_supply) { + if (on) { + ret = regulator_enable(chip->vconn_supply); + if (ret) { + dev_err(chip->dev, + "failed to enable vconn supply: %d\n", + ret); + return ret; + } + } else { + regulator_disable(chip->vconn_supply); + } + } + + /* Manage VCONN monitoring and power path */ + ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL, + STUSB160X_VCONN_MONITORING_EN, + on ? STUSB160X_VCONN_MONITORING_EN : 0); + if (ret) + goto vconn_reg_disable; + + return 0; + +vconn_reg_disable: + if (chip->vconn_supply && on) + regulator_disable(chip->vconn_supply); + + return ret; +} + +static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret); + return TYPEC_PWR_MODE_USB; + } + + return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val); +} + +static enum typec_accessory stusb160x_get_accessory(u32 status) +{ + enum stusb160x_attached_mode mode; + + mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status); + + switch (mode) { + case DEBUG_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_DEBUG; + case AUDIO_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_AUDIO; + default: + return TYPEC_ACCESSORY_NONE; + } +} + +static enum typec_role stusb160x_get_vconn_role(u32 status) +{ + if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status)) + return TYPEC_SOURCE; + + return TYPEC_SINK; +} + +static void stusb160x_set_data_role(struct stusb160x *chip, + enum typec_data_role data_role, + bool attached) +{ + enum usb_role usb_role = USB_ROLE_NONE; + + if (attached) { + if (data_role == TYPEC_HOST) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_DEVICE; + } + + usb_role_switch_set_role(chip->role_sw, usb_role); + typec_set_data_role(chip->port, data_role); +} + +static int stusb160x_attach(struct stusb160x *chip, u32 status) +{ + struct typec_partner_desc desc; + int ret; + + if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) && + chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable Vbus supply: %d\n", ret); + return ret; + } + chip->vbus_on = true; + } + + desc.usb_pd = false; + desc.accessory = stusb160x_get_accessory(status); + desc.identity = NULL; + + chip->partner = typec_register_partner(chip->port, &desc); + if (IS_ERR(chip->partner)) { + ret = PTR_ERR(chip->partner); + goto vbus_disable; + } + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip)); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true); + + return 0; + +vbus_disable: + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } + + return ret; +} + +static void stusb160x_detach(struct stusb160x *chip, u32 status) +{ + typec_unregister_partner(chip->partner); + chip->partner = NULL; + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false); + + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } +} + +static irqreturn_t stusb160x_irq_handler(int irq, void *data) +{ + struct stusb160x *chip = data; + u32 pending, trans, status; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending); + if (ret) + goto err; + + if (pending & STUSB160X_CC_CONNECTION) { + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans); + if (ret) + goto err; + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + goto err; + + if (trans & STUSB160X_CC_ATTACH_TRANS) { + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + goto err; + } else { + stusb160x_detach(chip, status); + } + } + } +err: + return IRQ_HANDLED; +} + +static int stusb160x_irq_init(struct stusb160x *chip, int irq) +{ + u32 status; + int ret; + + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + ret = devm_request_threaded_irq(chip->dev, irq, NULL, + stusb160x_irq_handler, IRQF_ONESHOT, + dev_name(chip->dev), chip); + if (ret) + goto partner_unregister; + + /* Unmask CC_CONNECTION events */ + ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); + if (ret) + goto partner_unregister; + + return 0; + +partner_unregister: + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + return ret; +} + +static int stusb160x_chip_init(struct stusb160x *chip) +{ + u32 val; + int ret; + + /* Change the default Type-C power mode */ + if (chip->port_type == TYPEC_PORT_SRC) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SOURCE_WITH_ACCESSORY); + else if (chip->port_type == TYPEC_PORT_SNK) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SINK_WITH_ACCESSORY); + else /* (chip->port_type == TYPEC_PORT_DRP) */ + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + DUAL_WITH_ACCESSORY); + if (ret) + return ret; + + if (chip->port_type == TYPEC_PORT_SNK) + goto skip_src; + + /* Change the default Type-C Source power operation mode capability */ + ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, + STUSB160X_CC_CURRENT_ADVERTISED, + FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED, + chip->pwr_opmode)); + if (ret) + return ret; + + /* Manage Type-C Source Vconn supply */ + if (stusb160x_get_vconn(chip)) { + ret = stusb160x_set_vconn(chip, true); + if (ret) + return ret; + } + +skip_src: + /* Mask all events interrupts - to be unmasked with interrupt support */ + ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); + if (ret) + return ret; + + /* Read status at least once to clear any stale interrupts */ + regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val); + regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val); + + return 0; +} + +static int stusb160x_get_fw_caps(struct stusb160x *chip, + struct fwnode_handle *fwnode) +{ + const char *cap_str; + int ret; + + chip->capability.fwnode = fwnode; + + /* + * Supported port type can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); + if (!ret) { + chip->port_type = typec_find_port_power_role(cap_str); + if (chip->port_type < 0) { + ret = chip->port_type; + return ret; + } + } + chip->capability.type = chip->port_type; + + /* Skip DRP/Source capabilities in case of Sink only */ + if (chip->port_type == TYPEC_PORT_SNK) + return 0; + + if (chip->port_type == TYPEC_PORT_DRP) + chip->capability.prefer_role = TYPEC_SINK; + + /* + * Supported power operation mode can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "power-opmode", &cap_str); + if (!ret) { + chip->pwr_opmode = typec_find_pwr_opmode(cap_str); + /* Power delivery not yet supported */ + if (chip->pwr_opmode < 0 || + chip->pwr_opmode == TYPEC_PWR_MODE_PD) { + ret = chip->pwr_opmode < 0 ? chip->pwr_opmode : -EINVAL; + dev_err(chip->dev, "bad power operation mode: %d\n", + chip->pwr_opmode); + return ret; + } + } + + return 0; +} + +static int stusb160x_get_caps(struct stusb160x *chip) +{ + enum typec_port_type *type = &chip->capability.type; + enum typec_port_data *data = &chip->capability.data; + enum typec_accessory *accessory = chip->capability.accessory; + u32 val; + int ret; + + chip->capability.revision = USB_TYPEC_REV_1_2; + + ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val); + if (ret) + return ret; + + switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) { + case SOURCE_WITH_ACCESSORY: + *type = TYPEC_PORT_SRC; + *data = TYPEC_PORT_DFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITH_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITHOUT_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + break; + case DUAL_WITH_ACCESSORY: + case DUAL_WITH_ACCESSORY_AND_TRY_SRC: + case DUAL_WITH_ACCESSORY_AND_TRY_SNK: + *type = TYPEC_PORT_DRP; + *data = TYPEC_PORT_DRD; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + default: + return -EINVAL; + } + + chip->port_type = *type; + chip->pwr_opmode = stusb160x_get_pwr_opmode(chip); + + return 0; +} + +static const struct of_device_id stusb160x_of_match[] = { + { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config}, + {}, +}; + +static int stusb160x_probe(struct i2c_client *client) +{ + struct stusb160x *chip; + const struct of_device_id *match; + struct regmap_config *regmap_config; + struct fwnode_handle *fwnode; + int ret; + + chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + + match = i2c_of_match_device(stusb160x_of_match, client); + regmap_config = (struct regmap_config *)match->data; + chip->regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "Failed to allocate register map:%d\n", ret); + return ret; + } + + chip->dev = &client->dev; + + chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys"); + if (IS_ERR(chip->vsys_supply)) { + ret = PTR_ERR(chip->vsys_supply); + if (ret != -ENODEV) + return ret; + chip->vsys_supply = NULL; + } + + chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd"); + if (IS_ERR(chip->vdd_supply)) { + ret = PTR_ERR(chip->vdd_supply); + if (ret != -ENODEV) + return ret; + chip->vdd_supply = NULL; + } + + chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn"); + if (IS_ERR(chip->vconn_supply)) { + ret = PTR_ERR(chip->vconn_supply); + if (ret != -ENODEV) + return ret; + chip->vconn_supply = NULL; + } + + fwnode = device_get_named_child_node(chip->dev, "connector"); + if (IS_ERR(fwnode)) + return PTR_ERR(fwnode); + + /* + * When both VDD and VSYS power supplies are present, the low power + * supply VSYS is selected when VSYS voltage is above 3.1 V. + * Otherwise VDD is selected. + */ + if (chip->vdd_supply && + (!chip->vsys_supply || + (regulator_get_voltage(chip->vsys_supply) <= 3100000))) + chip->main_supply = chip->vdd_supply; + else + chip->main_supply = chip->vsys_supply; + + if (chip->main_supply) { + ret = regulator_enable(chip->main_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable main supply: %d\n", ret); + goto fwnode_put; + } + } + + /* Get configuration from chip */ + ret = stusb160x_get_caps(chip); + if (ret) { + dev_err(chip->dev, "Failed to get port caps: %d\n", ret); + goto main_reg_disable; + } + + /* Get optional re-configuration from device tree */ + ret = stusb160x_get_fw_caps(chip, fwnode); + if (ret) { + dev_err(chip->dev, "Failed to get connector caps: %d\n", ret); + goto main_reg_disable; + } + + ret = stusb160x_chip_init(chip); + if (ret) { + dev_err(chip->dev, "Failed to init port: %d\n", ret); + goto main_reg_disable; + } + + chip->port = typec_register_port(chip->dev, &chip->capability); + if (!chip->port) { + ret = -ENODEV; + goto all_reg_disable; + } + + /* + * Default power operation mode initialization: will be updated upon + * attach/detach interrupt + */ + typec_set_pwr_opmode(chip->port, chip->pwr_opmode); + + if (client->irq) { + ret = stusb160x_irq_init(chip, client->irq); + if (ret) + goto port_unregister; + + chip->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(chip->role_sw)) { + ret = PTR_ERR(chip->role_sw); + if (ret != -EPROBE_DEFER) + dev_err(chip->dev, + "Failed to get usb role switch: %d\n", + ret); + goto port_unregister; + } + } else { + /* + * If Source or Dual power role, need to enable VDD supply + * providing Vbus if present. In case of interrupt support, + * VDD supply will be dynamically managed upon attach/detach + * interrupt. + */ + if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable VDD supply: %d\n", + ret); + goto port_unregister; + } + chip->vbus_on = true; + } + } + + fwnode_handle_put(fwnode); + + return 0; + +port_unregister: + typec_unregister_port(chip->port); +all_reg_disable: + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); +main_reg_disable: + if (chip->main_supply) + regulator_disable(chip->main_supply); +fwnode_put: + fwnode_handle_put(fwnode); + + return ret; +} + +static int stusb160x_remove(struct i2c_client *client) +{ + struct stusb160x *chip = i2c_get_clientdata(client); + + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + if (chip->vbus_on) + regulator_disable(chip->vdd_supply); + + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); + + typec_unregister_port(chip->port); + + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); + + if (chip->main_supply) + regulator_disable(chip->main_supply); + + return 0; +} + +static int __maybe_unused stusb160x_suspend(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + + /* Mask interrupts */ + return regmap_update_bits(chip->regmap, + STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); +} + +static int __maybe_unused stusb160x_resume(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + u32 status; + int ret; + + ret = regcache_sync(chip->regmap); + if (ret) + return ret; + + /* Check if attach/detach occurred during low power */ + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (chip->partner && !(status & STUSB160X_CC_ATTACH)) + stusb160x_detach(chip, status); + + if (!chip->partner && (status & STUSB160X_CC_ATTACH)) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + /* Unmask interrupts */ + return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); +} + +static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume); + +static struct i2c_driver stusb160x_driver = { + .driver = { + .name = "stusb160x", + .pm = &stusb160x_pm_ops, + .of_match_table = stusb160x_of_match, + }, + .probe_new = stusb160x_probe, + .remove = stusb160x_remove, +}; +module_i2c_driver(stusb160x_driver); + +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index fa3f39336246..557f392fe24d 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -27,6 +27,20 @@ config TYPEC_RT1711H Type-C Port Controller Manager to provide USB PD and USB Type-C functionalities. +config TYPEC_MT6360 + tristate "Mediatek MT6360 Type-C driver" + depends on MFD_MT6360 + help + Mediatek MT6360 is a multi-functional IC that includes + USB Type-C. It works with Type-C Port Controller Manager + to provide USB PD and USB Type-C functionalities. + +config TYPEC_TCPCI_MAXIM + tristate "Maxim TCPCI based Type-C chip driver" + help + MAXIM TCPCI based Type-C/PD chip driver. Works with + with Type-C Port Controller Manager. + endif # TYPEC_TCPCI config TYPEC_FUSB302 diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile index a5ff6c8eb892..7d499f3569fd 100644 --- a/drivers/usb/typec/tcpm/Makefile +++ b/drivers/usb/typec/tcpm/Makefile @@ -1,7 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_TYPEC_TCPM) += tcpm.o -obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o -obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o -typec_wcove-y := wcove.o -obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o -obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o +obj-$(CONFIG_TYPEC_TCPM) += tcpm.o +obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o +typec_wcove-y := wcove.o +obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o +obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o +obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o +obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index bd80e03b2b6f..f9f0af64da5f 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -38,6 +38,12 @@ struct tcpci_chip { struct tcpci_data data; }; +struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci) +{ + return tcpci->port; +} +EXPORT_SYMBOL_GPL(tcpci_get_tcpm_port); + static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc) { return container_of(tcpc, struct tcpci, tcpc); @@ -191,12 +197,47 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc, struct tcpci *tcpci = tcpc_to_tcpci(tcpc); unsigned int reg; int ret; + enum typec_cc_status cc1, cc2; - /* Keep the disconnect cc line open */ + /* Obtain Rp setting from role control */ ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, ®); if (ret < 0) return ret; + ret = tcpci_get_cc(tcpc, &cc1, &cc2); + if (ret < 0) + return ret; + + /* + * When port has drp toggling enabled, ROLE_CONTROL would only have the initial + * terminations for the toggling and does not indicate the final cc + * terminations when ConnectionResult is 0 i.e. drp toggling stops and + * the connection is resolbed. Infer port role from TCPC_CC_STATUS based on the + * terminations seen. The port role is then used to set the cc terminations. + */ + if (reg & TCPC_ROLE_CTRL_DRP) { + /* Disable DRP for the OPEN setting to take effect */ + reg = reg & ~TCPC_ROLE_CTRL_DRP; + + if (polarity == TYPEC_POLARITY_CC2) { + reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT); + /* Local port is source */ + if (cc2 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; + } else { + reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT); + /* Local port is source */ + if (cc1 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; + } + } + if (polarity == TYPEC_POLARITY_CC2) reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT; else @@ -227,6 +268,22 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable) enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0); } +static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + int ret; + + /* To prevent disconnect during FRS, set disconnect threshold to 3.5V */ + ret = tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, enable ? 0 : 0x8c); + if (ret < 0) + return ret; + + ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_FAST_ROLE_SWAP_EN, enable ? + TCPC_FAST_ROLE_SWAP_EN : 0); + + return ret; +} + static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable) { struct tcpci *tcpci = tcpc_to_tcpci(tcpc); @@ -287,6 +344,13 @@ static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink) struct tcpci *tcpci = tcpc_to_tcpci(tcpc); int ret; + if (tcpci->data->set_vbus) { + ret = tcpci->data->set_vbus(tcpci, tcpci->data, source, sink); + /* Bypass when ret > 0 */ + if (ret != 0) + return ret < 0 ? ret : 0; + } + /* Disable both source and sink first before enabling anything */ if (!source) { @@ -330,23 +394,47 @@ static int tcpci_pd_transmit(struct tcpc_dev *tcpc, int ret; cnt = msg ? pd_header_cnt(header) * 4 : 0; - ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2); - if (ret < 0) - return ret; + /** + * TCPCI spec forbids direct access of TCPC_TX_DATA. + * But, since some of the chipsets offer this capability, + * it's fair to support both. + */ + if (tcpci->data->TX_BUF_BYTE_x_hidden) { + u8 buf[TCPC_TRANSMIT_BUFFER_MAX_LEN] = {0,}; + u8 pos = 0; - ret = tcpci_write16(tcpci, TCPC_TX_HDR, header); - if (ret < 0) - return ret; + /* Payload + header + TCPC_TX_BYTE_CNT */ + buf[pos++] = cnt + 2; + + if (msg) + memcpy(&buf[pos], &msg->header, sizeof(msg->header)); - if (cnt > 0) { - ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, - &msg->payload, cnt); + pos += sizeof(header); + + if (cnt > 0) + memcpy(&buf[pos], msg->payload, cnt); + + pos += cnt; + ret = regmap_raw_write(tcpci->regmap, TCPC_TX_BYTE_CNT, buf, pos); + if (ret < 0) + return ret; + } else { + ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2); if (ret < 0) return ret; + + ret = tcpci_write16(tcpci, TCPC_TX_HDR, header); + if (ret < 0) + return ret; + + if (cnt > 0) { + ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, &msg->payload, cnt); + if (ret < 0) + return ret; + } } - reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) | - (type << TCPC_TRANSMIT_TYPE_SHIFT); + reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT); ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg); if (ret < 0) return ret; @@ -539,6 +627,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.set_roles = tcpci_set_roles; tcpci->tcpc.pd_transmit = tcpci_pd_transmit; tcpci->tcpc.set_bist_data = tcpci_set_bist_data; + tcpci->tcpc.enable_frs = tcpci_enable_frs; err = tcpci_parse_config(tcpci); if (err < 0) diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h index 11c36d086c86..5ef07a56d67a 100644 --- a/drivers/usb/typec/tcpm/tcpci.h +++ b/drivers/usb/typec/tcpm/tcpci.h @@ -16,6 +16,8 @@ #define TCPC_PD_INT_REV 0xa #define TCPC_ALERT 0x10 +#define TCPC_ALERT_EXTND BIT(14) +#define TCPC_ALERT_EXTENDED_STATUS BIT(13) #define TCPC_ALERT_VBUS_DISCNCT BIT(11) #define TCPC_ALERT_RX_BUF_OVF BIT(10) #define TCPC_ALERT_FAULT BIT(9) @@ -32,6 +34,13 @@ #define TCPC_ALERT_MASK 0x12 #define TCPC_POWER_STATUS_MASK 0x14 #define TCPC_FAULT_STATUS_MASK 0x15 + +#define TCPC_EXTENDED_STATUS_MASK 0x16 +#define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0) + +#define TCPC_ALERT_EXTENDED_MASK 0x17 +#define TCPC_SINK_FAST_ROLE_SWAP BIT(0) + #define TCPC_CONFIG_STD_OUTPUT 0x18 #define TCPC_TCPC_CTRL 0x19 @@ -58,6 +67,7 @@ #define TCPC_POWER_CTRL 0x1c #define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0) +#define TCPC_FAST_ROLE_SWAP_EN BIT(7) #define TCPC_CC_STATUS 0x1d #define TCPC_CC_STATUS_TOGGLING BIT(5) @@ -69,11 +79,14 @@ #define TCPC_POWER_STATUS 0x1e #define TCPC_POWER_STATUS_UNINIT BIT(6) +#define TCPC_POWER_STATUS_SOURCING_VBUS BIT(4) #define TCPC_POWER_STATUS_VBUS_DET BIT(3) #define TCPC_POWER_STATUS_VBUS_PRES BIT(2) #define TCPC_FAULT_STATUS 0x1f +#define TCPC_ALERT_EXTENDED 0x21 + #define TCPC_COMMAND 0x23 #define TCPC_CMD_WAKE_I2C 0x11 #define TCPC_CMD_DISABLE_VBUS_DETECT 0x22 @@ -104,6 +117,7 @@ #define TCPC_RX_BYTE_CNT 0x30 #define TCPC_RX_BUF_FRAME_TYPE 0x31 +#define TCPC_RX_BUF_FRAME_TYPE_SOP 0 #define TCPC_RX_HDR 0x32 #define TCPC_RX_DATA 0x34 /* through 0x4f */ @@ -123,18 +137,29 @@ #define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76 #define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78 +/* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */ +#define TCPC_TRANSMIT_BUFFER_MAX_LEN 31 + +/* + * @TX_BUF_BYTE_x_hidden + * optional; Set when TX_BUF_BYTE_x can only be accessed through I2C_WRITE_BYTE_COUNT. + */ struct tcpci; struct tcpci_data { struct regmap *regmap; + unsigned char TX_BUF_BYTE_x_hidden:1; int (*init)(struct tcpci *tcpci, struct tcpci_data *data); int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data, bool enable); int (*start_drp_toggling)(struct tcpci *tcpci, struct tcpci_data *data, enum typec_cc_status cc); + int (*set_vbus)(struct tcpci *tcpci, struct tcpci_data *data, bool source, bool sink); }; struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data); void tcpci_unregister_port(struct tcpci *tcpci); irqreturn_t tcpci_irq(struct tcpci *tcpci); +struct tcpm_port; +struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci); #endif /* __LINUX_USB_TCPCI_H */ diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c new file mode 100644 index 000000000000..723d7dd38f75 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020, Google LLC + * + * MAXIM TCPCI based TCPC driver + */ + +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/usb/pd.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> + +#include "tcpci.h" + +#define PD_ACTIVITY_TIMEOUT_MS 10000 + +#define TCPC_VENDOR_ALERT 0x80 + +#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET 0 +#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET 1 +#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET 2 + +/* + * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER. + * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be + * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT). + */ +#define TCPC_RECEIVE_BUFFER_LEN 32 + +#define MAX_BUCK_BOOST_SID 0x69 +#define MAX_BUCK_BOOST_OP 0xb9 +#define MAX_BUCK_BOOST_OFF 0 +#define MAX_BUCK_BOOST_SOURCE 0xa +#define MAX_BUCK_BOOST_SINK 0x5 + +struct max_tcpci_chip { + struct tcpci_data data; + struct tcpci *tcpci; + struct device *dev; + struct i2c_client *client; + struct tcpm_port *port; +}; + +static const struct regmap_range max_tcpci_tcpci_range[] = { + regmap_reg_range(0x00, 0x95) +}; + +const struct regmap_access_table max_tcpci_tcpci_write_table = { + .yes_ranges = max_tcpci_tcpci_range, + .n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range), +}; + +static const struct regmap_config max_tcpci_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x95, + .wr_table = &max_tcpci_tcpci_write_table, +}; + +static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata) +{ + return container_of(tdata, struct max_tcpci_chip, data); +} + +static int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16)); +} + +static int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16)); +} + +static int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8)); +} + +static int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8)); +} + +static void max_tcpci_init_regs(struct max_tcpci_chip *chip) +{ + u16 alert_mask = 0; + int ret; + + ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret); + return; + } + + ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret); + return; + } + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, 0xff); + if (ret < 0) { + dev_err(chip->dev, "Unable to clear TCPC_ALERT_EXTENDED ret:%d\n", ret); + return; + } + + alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | + TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | + TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | + /* Enable Extended alert for detecting Fast Role Swap Signal */ + TCPC_ALERT_EXTND; + + ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); + if (ret < 0) { + dev_err(chip->dev, + "Error enabling TCPC_ALERT: TCPC_ALERT_MASK write failed ret:%d\n", ret); + return; + } + + /* Enable vbus voltage monitoring and voltage alerts */ + ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0); + if (ret < 0) { + dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret); + return; + } + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED_MASK, TCPC_SINK_FAST_ROLE_SWAP); + if (ret < 0) + return; +} + +static void process_rx(struct max_tcpci_chip *chip, u16 status) +{ + struct pd_message msg; + u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN]; + int ret, payload_index; + u8 *rx_buf_ptr; + + /* + * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers + * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36. + * Read the count and frame type. + */ + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2); + if (ret < 0) { + dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret); + return; + } + + count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET]; + frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET]; + + if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) { + max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS); + dev_err(chip->dev, "%s", count == 0 ? "error: count is 0" : + "error frame_type is not SOP"); + return; + } + + if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) { + dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count); + return; + } + + /* + * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through + * TCPC_RX_BYTE_CNT + */ + count += 1; + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count); + if (ret < 0) { + dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret); + return; + } + + rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET; + msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr); + rx_buf_ptr = rx_buf_ptr + sizeof(msg.header); + for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++, + rx_buf_ptr += sizeof(msg.payload[0])) + msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr); + + /* + * Read complete, clear RX status alert bit. + * Clear overflow as well if set. + */ + ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ? + TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF : + TCPC_ALERT_RX_STATUS); + if (ret < 0) + return; + + tcpm_pd_receive(chip->port, &msg); +} + +static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE}; + u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK}; + u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF}; + struct i2c_client *i2c = chip->client; + int ret; + + struct i2c_msg msgs[] = { + { + .addr = MAX_BUCK_BOOST_SID, + .flags = i2c->flags & I2C_M_TEN, + .len = 2, + .buf = source ? buffer_source : sink ? buffer_sink : buffer_none, + }, + }; + + if (source && sink) { + dev_err(chip->dev, "Both source and sink set\n"); + return -EINVAL; + } + + ret = i2c_transfer(i2c->adapter, msgs, 1); + + return ret < 0 ? ret : 1; +} + +static void process_power_status(struct max_tcpci_chip *chip) +{ + u8 pwr_status; + int ret; + + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status); + if (ret < 0) + return; + + if (pwr_status == 0xff) { + max_tcpci_init_regs(chip); + } else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) { + tcpm_sourcing_vbus(chip->port); + /* + * Alawys re-enable boost here. + * In normal case, when say an headset is attached, TCPM would + * have instructed to TCPC to enable boost, so the call is a + * no-op. + * But for Fast Role Swap case, Boost turns on autonomously without + * AP intervention, but, needs AP to enable source mode explicitly + * for AP to regain control. + */ + max_tcpci_set_vbus(chip->tcpci, &chip->data, true, false); + } else { + tcpm_vbus_change(chip->port); + } +} + +static void process_tx(struct max_tcpci_chip *chip, u16 status) +{ + if (status & TCPC_ALERT_TX_SUCCESS) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS); + else if (status & TCPC_ALERT_TX_DISCARDED) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED); + else if (status & TCPC_ALERT_TX_FAILED) + tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED); + + /* Reinit regs as Hard reset sets them to default value */ + if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED)) + max_tcpci_init_regs(chip); +} + +static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) +{ + u16 mask; + int ret; + u8 reg_status; + + /* + * Clear alert status for everything except RX_STATUS, which shouldn't + * be cleared until we have successfully retrieved message. + */ + if (status & ~TCPC_ALERT_RX_STATUS) { + mask = status & TCPC_ALERT_RX_BUF_OVF ? + status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) : + status & ~TCPC_ALERT_RX_STATUS; + ret = max_tcpci_write16(chip, TCPC_ALERT, mask); + if (ret < 0) { + dev_err(chip->dev, "ALERT clear failed\n"); + return ret; + } + } + + if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) { + ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS | + TCPC_ALERT_RX_BUF_OVF)); + if (ret < 0) { + dev_err(chip->dev, "ALERT clear failed\n"); + return ret; + } + } + + if (status & TCPC_ALERT_EXTND) { + ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, ®_status); + if (ret < 0) + return ret; + + ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, reg_status); + if (ret < 0) + return ret; + + if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) { + dev_info(chip->dev, "FRS Signal"); + tcpm_sink_frs(chip->port); + } + } + + if (status & TCPC_ALERT_RX_STATUS) + process_rx(chip, status); + + if (status & TCPC_ALERT_VBUS_DISCNCT) + tcpm_vbus_change(chip->port); + + if (status & TCPC_ALERT_CC_STATUS) + tcpm_cc_change(chip->port); + + if (status & TCPC_ALERT_POWER_STATUS) + process_power_status(chip); + + if (status & TCPC_ALERT_RX_HARD_RST) { + tcpm_pd_hard_reset(chip->port); + max_tcpci_init_regs(chip); + } + + if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status & + TCPC_ALERT_TX_FAILED) + process_tx(chip, status); + + return IRQ_HANDLED; +} + +static irqreturn_t max_tcpci_irq(int irq, void *dev_id) +{ + struct max_tcpci_chip *chip = dev_id; + u16 status; + irqreturn_t irq_return; + int ret; + + if (!chip->port) + return IRQ_HANDLED; + + ret = max_tcpci_read16(chip, TCPC_ALERT, &status); + if (ret < 0) { + dev_err(chip->dev, "ALERT read failed\n"); + return ret; + } + while (status) { + irq_return = _max_tcpci_irq(chip, status); + /* Do not return if the ALERT is already set. */ + ret = max_tcpci_read16(chip, TCPC_ALERT, &status); + if (ret < 0) + break; + } + + return irq_return; +} + +static irqreturn_t max_tcpci_isr(int irq, void *dev_id) +{ + struct max_tcpci_chip *chip = dev_id; + + pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS); + + if (!chip->port) + return IRQ_HANDLED; + + return IRQ_WAKE_THREAD; +} + +static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client) +{ + int ret; + + ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq, + (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev), + chip); + + if (ret < 0) + return ret; + + enable_irq_wake(client->irq); + return 0; +} + +static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata, + enum typec_cc_status cc) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + + max_tcpci_init_regs(chip); + + return 0; +} + +static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data) +{ + /* + * Generic TCPCI overwrites the regs once this driver initializes + * them. Prevent this by returning -1. + */ + return -1; +} + +static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) +{ + int ret; + struct max_tcpci_chip *chip; + u8 power_status; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config); + if (IS_ERR(chip->data.regmap)) { + dev_err(&client->dev, "Regmap init failed\n"); + return PTR_ERR(chip->data.regmap); + } + + chip->dev = &client->dev; + i2c_set_clientdata(client, chip); + + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status); + if (ret < 0) + return ret; + + /* Chip level tcpci callbacks */ + chip->data.set_vbus = max_tcpci_set_vbus; + chip->data.start_drp_toggling = max_tcpci_start_toggling; + chip->data.TX_BUF_BYTE_x_hidden = true; + chip->data.init = tcpci_init; + + max_tcpci_init_regs(chip); + chip->tcpci = tcpci_register_port(chip->dev, &chip->data); + if (IS_ERR_OR_NULL(chip->tcpci)) { + dev_err(&client->dev, "TCPCI port registration failed"); + ret = PTR_ERR(chip->tcpci); + return PTR_ERR(chip->tcpci); + } + chip->port = tcpci_get_tcpm_port(chip->tcpci); + ret = max_tcpci_init_alert(chip, client); + if (ret < 0) + goto unreg_port; + + device_init_wakeup(chip->dev, true); + return 0; + +unreg_port: + tcpci_unregister_port(chip->tcpci); + + return ret; +} + +static int max_tcpci_remove(struct i2c_client *client) +{ + struct max_tcpci_chip *chip = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(chip->tcpci)) + tcpci_unregister_port(chip->tcpci); + + return 0; +} + +static const struct i2c_device_id max_tcpci_id[] = { + { "maxtcpc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max_tcpci_id); + +#ifdef CONFIG_OF +static const struct of_device_id max_tcpci_of_match[] = { + { .compatible = "maxim,tcpc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, max_tcpci_of_match); +#endif + +static struct i2c_driver max_tcpci_i2c_driver = { + .driver = { + .name = "maxtcpc", + .of_match_table = of_match_ptr(max_tcpci_of_match), + }, + .probe = max_tcpci_probe, + .remove = max_tcpci_remove, + .id_table = max_tcpci_id, +}; +module_i2c_driver(max_tcpci_i2c_driver); + +MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>"); +MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c new file mode 100644 index 000000000000..f1bd9e09bc87 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/usb/tcpm.h> + +#include "tcpci.h" + +#define MT6360_REG_VCONNCTRL1 0x8C +#define MT6360_REG_MODECTRL2 0x8F +#define MT6360_REG_SWRESET 0xA0 +#define MT6360_REG_DEBCTRL1 0xA1 +#define MT6360_REG_DRPCTRL1 0xA2 +#define MT6360_REG_DRPCTRL2 0xA3 +#define MT6360_REG_I2CTORST 0xBF +#define MT6360_REG_RXCTRL2 0xCF +#define MT6360_REG_CTDCTRL2 0xEC + +/* MT6360_REG_VCONNCTRL1 */ +#define MT6360_VCONNCL_ENABLE BIT(0) +/* MT6360_REG_RXCTRL2 */ +#define MT6360_OPEN40M_ENABLE BIT(7) +/* MT6360_REG_CTDCTRL2 */ +#define MT6360_RPONESHOT_ENABLE BIT(6) + +struct mt6360_tcpc_info { + struct tcpci_data tdata; + struct tcpci *tcpci; + struct device *dev; + int irq; +}; + +static inline int mt6360_tcpc_read16(struct regmap *regmap, + unsigned int reg, u16 *val) +{ + return regmap_raw_read(regmap, reg, val, sizeof(u16)); +} + +static inline int mt6360_tcpc_write16(struct regmap *regmap, + unsigned int reg, u16 val) +{ + return regmap_raw_write(regmap, reg, &val, sizeof(u16)); +} + +static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + struct regmap *regmap = tdata->regmap; + int ret; + + ret = regmap_write(regmap, MT6360_REG_SWRESET, 0x01); + if (ret) + return ret; + + /* after reset command, wait 1~2ms to wait IC action */ + usleep_range(1000, 2000); + + /* write all alert to masked */ + ret = mt6360_tcpc_write16(regmap, TCPC_ALERT_MASK, 0); + if (ret) + return ret; + + /* config I2C timeout reset enable , and timeout to 200ms */ + ret = regmap_write(regmap, MT6360_REG_I2CTORST, 0x8F); + if (ret) + return ret; + + /* config CC Detect Debounce : 26.7*val us */ + ret = regmap_write(regmap, MT6360_REG_DEBCTRL1, 0x10); + if (ret) + return ret; + + /* DRP Toggle Cycle : 51.2 + 6.4*val ms */ + ret = regmap_write(regmap, MT6360_REG_DRPCTRL1, 4); + if (ret) + return ret; + + /* DRP Duyt Ctrl : dcSRC: /1024 */ + ret = mt6360_tcpc_write16(regmap, MT6360_REG_DRPCTRL2, 330); + if (ret) + return ret; + + /* Enable VCONN Current Limit function */ + ret = regmap_update_bits(regmap, MT6360_REG_VCONNCTRL1, MT6360_VCONNCL_ENABLE, + MT6360_VCONNCL_ENABLE); + if (ret) + return ret; + + /* Enable cc open 40ms when pmic send vsysuv signal */ + ret = regmap_update_bits(regmap, MT6360_REG_RXCTRL2, MT6360_OPEN40M_ENABLE, + MT6360_OPEN40M_ENABLE); + if (ret) + return ret; + + /* Enable Rpdet oneshot detection */ + ret = regmap_update_bits(regmap, MT6360_REG_CTDCTRL2, MT6360_RPONESHOT_ENABLE, + MT6360_RPONESHOT_ENABLE); + if (ret) + return ret; + + /* Set shipping mode off, AUTOIDLE on */ + return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); +} + +static irqreturn_t mt6360_irq(int irq, void *dev_id) +{ + struct mt6360_tcpc_info *mti = dev_id; + + return tcpci_irq(mti->tcpci); +} + +static int mt6360_tcpc_probe(struct platform_device *pdev) +{ + struct mt6360_tcpc_info *mti; + int ret; + + mti = devm_kzalloc(&pdev->dev, sizeof(*mti), GFP_KERNEL); + if (!mti) + return -ENOMEM; + + mti->dev = &pdev->dev; + + mti->tdata.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!mti->tdata.regmap) { + dev_err(&pdev->dev, "Failed to get parent regmap\n"); + return -ENODEV; + } + + mti->irq = platform_get_irq_byname(pdev, "PD_IRQB"); + if (mti->irq < 0) + return mti->irq; + + mti->tdata.init = mt6360_tcpc_init; + mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata); + if (IS_ERR(mti->tcpci)) { + dev_err(&pdev->dev, "Failed to register tcpci port\n"); + return PTR_ERR(mti->tcpci); + } + + ret = devm_request_threaded_irq(mti->dev, mti->irq, NULL, mt6360_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), mti); + if (ret) { + dev_err(mti->dev, "Failed to register irq\n"); + tcpci_unregister_port(mti->tcpci); + return ret; + } + + device_init_wakeup(&pdev->dev, true); + platform_set_drvdata(pdev, mti); + + return 0; +} + +static int mt6360_tcpc_remove(struct platform_device *pdev) +{ + struct mt6360_tcpc_info *mti = platform_get_drvdata(pdev); + + disable_irq(mti->irq); + tcpci_unregister_port(mti->tcpci); + return 0; +} + +static int __maybe_unused mt6360_tcpc_suspend(struct device *dev) +{ + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(mti->irq); + + return 0; +} + +static int __maybe_unused mt6360_tcpc_resume(struct device *dev) +{ + struct mt6360_tcpc_info *mti = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(mti->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mt6360_tcpc_pm_ops, mt6360_tcpc_suspend, mt6360_tcpc_resume); + +static const struct of_device_id __maybe_unused mt6360_tcpc_of_id[] = { + { .compatible = "mediatek,mt6360-tcpc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt6360_tcpc_of_id); + +static struct platform_driver mt6360_tcpc_driver = { + .driver = { + .name = "mt6360-tcpc", + .pm = &mt6360_tcpc_pm_ops, + .of_match_table = mt6360_tcpc_of_id, + }, + .probe = mt6360_tcpc_probe, + .remove = mt6360_tcpc_remove, +}; +module_platform_driver(mt6360_tcpc_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MT6360 USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index a48e3f90d196..55535c4f66bf 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -8,8 +8,10 @@ #include <linux/completion.h> #include <linux/debugfs.h> #include <linux/device.h> +#include <linux/hrtimer.h> #include <linux/jiffies.h> #include <linux/kernel.h> +#include <linux/kthread.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/power_supply.h> @@ -28,7 +30,8 @@ #include <linux/usb/role.h> #include <linux/usb/tcpm.h> #include <linux/usb/typec_altmode.h> -#include <linux/workqueue.h> + +#include <uapi/linux/sched/types.h> #define FOREACH_STATE(S) \ S(INVALID_STATE), \ @@ -103,6 +106,13 @@ S(VCONN_SWAP_TURN_ON_VCONN), \ S(VCONN_SWAP_TURN_OFF_VCONN), \ \ + S(FR_SWAP_SEND), \ + S(FR_SWAP_SEND_TIMEOUT), \ + S(FR_SWAP_SNK_SRC_TRANSITION_TO_OFF), \ + S(FR_SWAP_SNK_SRC_NEW_SINK_READY), \ + S(FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED), \ + S(FR_SWAP_CANCEL), \ + \ S(SNK_TRY), \ S(SNK_TRY_WAIT), \ S(SNK_TRY_WAIT_DEBOUNCE), \ @@ -124,6 +134,9 @@ S(GET_PPS_STATUS_SEND), \ S(GET_PPS_STATUS_SEND_TIMEOUT), \ \ + S(GET_SINK_CAP), \ + S(GET_SINK_CAP_TIMEOUT), \ + \ S(ERROR_RECOVERY), \ S(PORT_RESET), \ S(PORT_RESET_WAIT_OFF) @@ -167,11 +180,25 @@ enum adev_actions { ADEV_ATTENTION, }; +/* + * Initial current capability of the new source when vSafe5V is applied during PD3.0 Fast Role Swap. + * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0, + * Version 1.2" + */ +enum frs_typec_current { + FRS_NOT_SUPPORTED, + FRS_DEFAULT_POWER, + FRS_5V_1P5A, + FRS_5V_3A, +}; + /* Events from low level driver */ #define TCPM_CC_EVENT BIT(0) #define TCPM_VBUS_EVENT BIT(1) #define TCPM_RESET_EVENT BIT(2) +#define TCPM_FRS_EVENT BIT(3) +#define TCPM_SOURCING_VBUS BIT(4) #define LOG_BUFFER_ENTRIES 1024 #define LOG_BUFFER_ENTRY_SIZE 128 @@ -181,6 +208,8 @@ enum adev_actions { #define SVID_DISCOVERY_MAX 16 #define ALTMODE_DISCOVERY_MAX (SVID_DISCOVERY_MAX * MODE_DISCOVERY_MAX) +#define GET_SINK_CAP_RETRY_MS 100 + struct pd_mode_data { int svid_index; /* current SVID index */ int nsvids; @@ -203,7 +232,7 @@ struct tcpm_port { struct device *dev; struct mutex lock; /* tcpm state machine lock */ - struct workqueue_struct *wq; + struct kthread_worker *wq; struct typec_capability typec_caps; struct typec_port *typec_port; @@ -247,15 +276,19 @@ struct tcpm_port { enum tcpm_state prev_state; enum tcpm_state state; enum tcpm_state delayed_state; - unsigned long delayed_runtime; + ktime_t delayed_runtime; unsigned long delay_ms; spinlock_t pd_event_lock; u32 pd_events; - struct work_struct event_work; - struct delayed_work state_machine; - struct delayed_work vdm_state_machine; + struct kthread_work event_work; + struct hrtimer state_machine_timer; + struct kthread_work state_machine; + struct hrtimer vdm_state_machine_timer; + struct kthread_work vdm_state_machine; + struct hrtimer enable_frs_timer; + struct kthread_work enable_frs; bool state_machine_running; struct completion tx_complete; @@ -330,6 +363,12 @@ struct tcpm_port { /* port belongs to a self powered device */ bool self_powered; + /* FRS */ + enum frs_typec_current frs_current; + + /* Sink caps have been queried */ + bool sink_cap_done; + #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -340,7 +379,7 @@ struct tcpm_port { }; struct pd_rx_event { - struct work_struct work; + struct kthread_work work; struct tcpm_port *port; struct pd_message msg; }; @@ -914,6 +953,37 @@ static int tcpm_pd_send_sink_caps(struct tcpm_port *port) return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); } +static void mod_tcpm_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->state_machine_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->state_machine_timer); + kthread_queue_work(port->wq, &port->state_machine); + } +} + +static void mod_vdm_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->vdm_state_machine_timer, ms_to_ktime(delay_ms), + HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->vdm_state_machine_timer); + kthread_queue_work(port->wq, &port->vdm_state_machine); + } +} + +static void mod_enable_frs_delayed_work(struct tcpm_port *port, unsigned int delay_ms) +{ + if (delay_ms) { + hrtimer_start(&port->enable_frs_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&port->enable_frs_timer); + kthread_queue_work(port->wq, &port->enable_frs); + } +} + static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state, unsigned int delay_ms) { @@ -922,9 +992,8 @@ static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state, tcpm_states[port->state], tcpm_states[state], delay_ms); port->delayed_state = state; - mod_delayed_work(port->wq, &port->state_machine, - msecs_to_jiffies(delay_ms)); - port->delayed_runtime = jiffies + msecs_to_jiffies(delay_ms); + mod_tcpm_delayed_work(port, delay_ms); + port->delayed_runtime = ktime_add(ktime_get(), ms_to_ktime(delay_ms)); port->delay_ms = delay_ms; } else { tcpm_log(port, "state change %s -> %s", @@ -939,7 +1008,7 @@ static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state, * machine. */ if (!port->state_machine_running) - mod_delayed_work(port->wq, &port->state_machine, 0); + mod_tcpm_delayed_work(port, 0); } } @@ -960,7 +1029,7 @@ static void tcpm_queue_message(struct tcpm_port *port, enum pd_msg_request message) { port->queued_message = message; - mod_delayed_work(port->wq, &port->state_machine, 0); + mod_tcpm_delayed_work(port, 0); } /* @@ -981,7 +1050,7 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, port->vdm_retries = 0; port->vdm_state = VDM_STATE_READY; - mod_delayed_work(port->wq, &port->vdm_state_machine, 0); + mod_vdm_delayed_work(port, 0); } static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header, @@ -1244,8 +1313,7 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port, port->vdm_state = VDM_STATE_WAIT_RSP_BUSY; port->vdo_retry = (p[0] & ~VDO_CMDT_MASK) | CMDT_INIT; - mod_delayed_work(port->wq, &port->vdm_state_machine, - msecs_to_jiffies(PD_T_VDM_BUSY)); + mod_vdm_delayed_work(port, PD_T_VDM_BUSY); return; } port->vdm_state = VDM_STATE_DONE; @@ -1390,8 +1458,7 @@ static void vdm_run_state_machine(struct tcpm_port *port) port->vdm_retries = 0; port->vdm_state = VDM_STATE_BUSY; timeout = vdm_ready_timeout(port->vdo_data[0]); - mod_delayed_work(port->wq, &port->vdm_state_machine, - timeout); + mod_vdm_delayed_work(port, timeout); } break; case VDM_STATE_WAIT_RSP_BUSY: @@ -1420,10 +1487,9 @@ static void vdm_run_state_machine(struct tcpm_port *port) } } -static void vdm_state_machine_work(struct work_struct *work) +static void vdm_state_machine_work(struct kthread_work *work) { - struct tcpm_port *port = container_of(work, struct tcpm_port, - vdm_state_machine.work); + struct tcpm_port *port = container_of(work, struct tcpm_port, vdm_state_machine); enum vdm_states prev_state; mutex_lock(&port->lock); @@ -1591,6 +1657,7 @@ static int tcpm_altmode_vdm(struct typec_altmode *altmode, struct tcpm_port *port = typec_altmode_get_drvdata(altmode); tcpm_queue_vdm_unlocked(port, header, data, count - 1); + return 0; } @@ -1646,6 +1713,9 @@ static void tcpm_pd_data_request(struct tcpm_port *port, unsigned int cnt = pd_header_cnt_le(msg->header); unsigned int rev = pd_header_rev_le(msg->header); unsigned int i; + enum frs_typec_current frs_current; + bool frs_enable; + int ret; switch (type) { case PD_DATA_SOURCE_CAP: @@ -1715,7 +1785,21 @@ static void tcpm_pd_data_request(struct tcpm_port *port, /* We don't do anything with this at the moment... */ for (i = 0; i < cnt; i++) port->sink_caps[i] = le32_to_cpu(msg->payload[i]); + + frs_current = (port->sink_caps[0] & PDO_FIXED_FRS_CURR_MASK) >> + PDO_FIXED_FRS_CURR_SHIFT; + frs_enable = frs_current && (frs_current <= port->frs_current); + tcpm_log(port, + "Port partner FRS capable partner_frs_current:%u port_frs_current:%u enable:%c", + frs_current, port->frs_current, frs_enable ? 'y' : 'n'); + if (frs_enable) { + ret = port->tcpc->enable_frs(port->tcpc, true); + tcpm_log(port, "Enable FRS %s, ret:%d\n", ret ? "fail" : "success", ret); + } + port->nr_sink_caps = cnt; + port->sink_cap_done = true; + tcpm_set_state(port, SNK_READY, 0); break; case PD_DATA_VENDOR_DEF: tcpm_handle_vdm_request(port, msg->payload, cnt); @@ -1810,6 +1894,9 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case VCONN_SWAP_WAIT_FOR_VCONN: tcpm_set_state(port, VCONN_SWAP_TURN_OFF_VCONN, 0); break; + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + tcpm_set_state(port, FR_SWAP_SNK_SRC_NEW_SINK_READY, 0); + break; default: break; } @@ -1849,6 +1936,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, -EAGAIN : -EOPNOTSUPP); tcpm_set_state(port, VCONN_SWAP_CANCEL, 0); break; + case FR_SWAP_SEND: + tcpm_set_state(port, FR_SWAP_CANCEL, 0); + break; + case GET_SINK_CAP: + port->sink_cap_done = true; + tcpm_set_state(port, ready_state(port), 0); + break; default: break; } @@ -1883,6 +1977,9 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case VCONN_SWAP_SEND: tcpm_set_state(port, VCONN_SWAP_START, 0); break; + case FR_SWAP_SEND: + tcpm_set_state(port, FR_SWAP_SNK_SRC_TRANSITION_TO_OFF, 0); + break; default: break; } @@ -2005,7 +2102,7 @@ static void tcpm_pd_ext_msg_request(struct tcpm_port *port, } } -static void tcpm_pd_rx_handler(struct work_struct *work) +static void tcpm_pd_rx_handler(struct kthread_work *work) { struct pd_rx_event *event = container_of(work, struct pd_rx_event, work); @@ -2067,10 +2164,10 @@ void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg) if (!event) return; - INIT_WORK(&event->work, tcpm_pd_rx_handler); + kthread_init_work(&event->work, tcpm_pd_rx_handler); event->port = port; memcpy(&event->msg, msg, sizeof(*msg)); - queue_work(port->wq, &event->work); + kthread_queue_work(port->wq, &event->work); } EXPORT_SYMBOL_GPL(tcpm_pd_receive); @@ -2123,9 +2220,9 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) } while (port->queued_message != PD_MSG_NONE); if (port->delayed_state != INVALID_STATE) { - if (time_is_after_jiffies(port->delayed_runtime)) { - mod_delayed_work(port->wq, &port->state_machine, - port->delayed_runtime - jiffies); + if (ktime_after(port->delayed_runtime, ktime_get())) { + mod_tcpm_delayed_work(port, ktime_to_ms(ktime_sub(port->delayed_runtime, + ktime_get()))); return true; } port->delayed_state = INVALID_STATE; @@ -2783,6 +2880,10 @@ static void tcpm_reset_port(struct tcpm_port *port) port->try_src_count = 0; port->try_snk_count = 0; port->usb_type = POWER_SUPPLY_USB_TYPE_C; + port->nr_sink_caps = 0; + port->sink_cap_done = false; + if (port->tcpc->enable_frs) + port->tcpc->enable_frs(port->tcpc, false); power_supply_changed(port->psy); } @@ -3258,10 +3359,9 @@ static void run_state_machine(struct tcpm_port *port) case SNK_DISCOVERY_DEBOUNCE_DONE: if (!tcpm_port_is_disconnected(port) && tcpm_port_is_sink(port) && - time_is_after_jiffies(port->delayed_runtime)) { + ktime_after(port->delayed_runtime, ktime_get())) { tcpm_set_state(port, SNK_DISCOVERY, - jiffies_to_msecs(port->delayed_runtime - - jiffies)); + ktime_to_ms(ktime_sub(port->delayed_runtime, ktime_get()))); break; } tcpm_set_state(port, unattached_state(port), 0); @@ -3334,10 +3434,9 @@ static void run_state_machine(struct tcpm_port *port) tcpm_swap_complete(port, 0); tcpm_typec_connect(port); tcpm_check_send_discover(port); + mod_enable_frs_delayed_work(port, 0); tcpm_pps_complete(port, port->pps_status); - power_supply_changed(port->psy); - break; /* Accessory states */ @@ -3361,9 +3460,13 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, HARD_RESET_START, 0); break; case HARD_RESET_START: + port->sink_cap_done = false; + if (port->tcpc->enable_frs) + port->tcpc->enable_frs(port->tcpc, false); port->hard_reset_count++; port->tcpc->set_pd_rx(port->tcpc, false); tcpm_unregister_altmodes(port); + port->nr_sink_caps = 0; port->send_discover = true; if (port->pwr_role == TYPEC_SOURCE) tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF, @@ -3495,6 +3598,35 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, ready_state(port), 0); break; + case FR_SWAP_SEND: + if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); + break; + case FR_SWAP_SEND_TIMEOUT: + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_OFF); + break; + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + if (port->vbus_source) + tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0); + else + tcpm_set_state(port, ERROR_RECOVERY, PD_T_RECEIVER_RESPONSE); + break; + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + tcpm_set_pwr_role(port, TYPEC_SOURCE); + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + tcpm_set_state(port, ERROR_RECOVERY, 0); + break; + } + tcpm_set_cc(port, tcpm_rp_cc(port)); + tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); + break; + /* PR_Swap states */ case PR_SWAP_ACCEPT: tcpm_pd_send_control(port, PD_CTRL_ACCEPT); @@ -3573,7 +3705,7 @@ static void run_state_machine(struct tcpm_port *port) */ tcpm_set_pwr_role(port, TYPEC_SOURCE); tcpm_pd_send_control(port, PD_CTRL_PS_RDY); - tcpm_set_state(port, SRC_STARTUP, 0); + tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); break; case VCONN_SWAP_ACCEPT: @@ -3618,6 +3750,12 @@ static void run_state_machine(struct tcpm_port *port) else tcpm_set_state(port, SNK_READY, 0); break; + case FR_SWAP_CANCEL: + if (port->pwr_role == TYPEC_SOURCE) + tcpm_set_state(port, SRC_READY, 0); + else + tcpm_set_state(port, SNK_READY, 0); + break; case BIST_RX: switch (BDO_MODE_MASK(port->bist_request)) { @@ -3652,6 +3790,14 @@ static void run_state_machine(struct tcpm_port *port) case GET_PPS_STATUS_SEND_TIMEOUT: tcpm_set_state(port, ready_state(port), 0); break; + case GET_SINK_CAP: + tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP); + tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE); + break; + case GET_SINK_CAP_TIMEOUT: + port->sink_cap_done = true; + tcpm_set_state(port, ready_state(port), 0); + break; case ERROR_RECOVERY: tcpm_swap_complete(port, -EPROTO); tcpm_pps_complete(port, -EPROTO); @@ -3674,10 +3820,9 @@ static void run_state_machine(struct tcpm_port *port) } } -static void tcpm_state_machine_work(struct work_struct *work) +static void tcpm_state_machine_work(struct kthread_work *work) { - struct tcpm_port *port = container_of(work, struct tcpm_port, - state_machine.work); + struct tcpm_port *port = container_of(work, struct tcpm_port, state_machine); enum tcpm_state prev_state; mutex_lock(&port->lock); @@ -3868,6 +4013,13 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1, * Ignore it. */ break; + case FR_SWAP_SEND: + case FR_SWAP_SEND_TIMEOUT: + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + /* Do nothing, CC change expected */ + break; case PORT_RESET: case PORT_RESET_WAIT_OFF: @@ -3938,6 +4090,9 @@ static void _tcpm_pd_vbus_on(struct tcpm_port *port) case SRC_TRY_DEBOUNCE: /* Do nothing, waiting for sink detection */ break; + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0); + break; case PORT_RESET: case PORT_RESET_WAIT_OFF: @@ -4017,6 +4172,14 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port) */ break; + case FR_SWAP_SEND: + case FR_SWAP_SEND_TIMEOUT: + case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF: + case FR_SWAP_SNK_SRC_NEW_SINK_READY: + case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: + /* Do nothing, vbus drop expected */ + break; + default: if (port->pwr_role == TYPEC_SINK && port->attached) @@ -4041,7 +4204,7 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port) 0); } -static void tcpm_pd_event_handler(struct work_struct *work) +static void tcpm_pd_event_handler(struct kthread_work *work) { struct tcpm_port *port = container_of(work, struct tcpm_port, event_work); @@ -4071,6 +4234,25 @@ static void tcpm_pd_event_handler(struct work_struct *work) if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0) _tcpm_cc_change(port, cc1, cc2); } + if (events & TCPM_FRS_EVENT) { + if (port->state == SNK_READY) + tcpm_set_state(port, FR_SWAP_SEND, 0); + else + tcpm_log(port, "Discarding FRS_SIGNAL! Not in sink ready"); + } + if (events & TCPM_SOURCING_VBUS) { + tcpm_log(port, "sourcing vbus"); + /* + * In fast role swap case TCPC autonomously sources vbus. Set vbus_source + * true as TCPM wouldn't have called tcpm_set_vbus. + * + * When vbus is sourced on the command on TCPM i.e. TCPM called + * tcpm_set_vbus to source vbus, vbus_source would already be true. + */ + port->vbus_source = true; + _tcpm_pd_vbus_on(port); + } + spin_lock(&port->pd_event_lock); } spin_unlock(&port->pd_event_lock); @@ -4082,7 +4264,7 @@ void tcpm_cc_change(struct tcpm_port *port) spin_lock(&port->pd_event_lock); port->pd_events |= TCPM_CC_EVENT; spin_unlock(&port->pd_event_lock); - queue_work(port->wq, &port->event_work); + kthread_queue_work(port->wq, &port->event_work); } EXPORT_SYMBOL_GPL(tcpm_cc_change); @@ -4091,7 +4273,7 @@ void tcpm_vbus_change(struct tcpm_port *port) spin_lock(&port->pd_event_lock); port->pd_events |= TCPM_VBUS_EVENT; spin_unlock(&port->pd_event_lock); - queue_work(port->wq, &port->event_work); + kthread_queue_work(port->wq, &port->event_work); } EXPORT_SYMBOL_GPL(tcpm_vbus_change); @@ -4100,10 +4282,54 @@ void tcpm_pd_hard_reset(struct tcpm_port *port) spin_lock(&port->pd_event_lock); port->pd_events = TCPM_RESET_EVENT; spin_unlock(&port->pd_event_lock); - queue_work(port->wq, &port->event_work); + kthread_queue_work(port->wq, &port->event_work); } EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset); +void tcpm_sink_frs(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events = TCPM_FRS_EVENT; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_sink_frs); + +void tcpm_sourcing_vbus(struct tcpm_port *port) +{ + spin_lock(&port->pd_event_lock); + port->pd_events = TCPM_SOURCING_VBUS; + spin_unlock(&port->pd_event_lock); + kthread_queue_work(port->wq, &port->event_work); +} +EXPORT_SYMBOL_GPL(tcpm_sourcing_vbus); + +static void tcpm_enable_frs_work(struct kthread_work *work) +{ + struct tcpm_port *port = container_of(work, struct tcpm_port, enable_frs); + + mutex_lock(&port->lock); + /* Not FRS capable */ + if (!port->connected || port->port_type != TYPEC_PORT_DRP || + port->pwr_opmode != TYPEC_PWR_MODE_PD || + !port->tcpc->enable_frs || + /* Sink caps queried */ + port->sink_cap_done || port->negotiated_rev < PD_REV30) + goto unlock; + + /* Send when the state machine is idle */ + if (port->state != SNK_READY || port->vdm_state != VDM_STATE_DONE || port->send_discover) + goto resched; + + tcpm_set_state(port, GET_SINK_CAP, 0); + port->sink_cap_done = true; + +resched: + mod_enable_frs_delayed_work(port, GET_SINK_CAP_RETRY_MS); +unlock: + mutex_unlock(&port->lock); +} + static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data) { struct tcpm_port *port = typec_get_drvdata(p); @@ -4511,7 +4737,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, { const char *cap_str; int ret; - u32 mw; + u32 mw, frs_current; if (!fwnode) return -EINVAL; @@ -4580,6 +4806,13 @@ sink: port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + /* FRS can only be supported byb DRP ports */ + if (port->port_type == TYPEC_PORT_DRP) { + ret = fwnode_property_read_u32(fwnode, "frs-typec-current", &frs_current); + if (ret >= 0 && frs_current <= FRS_5V_3A) + port->frs_current = frs_current; + } + return 0; } @@ -4808,6 +5041,30 @@ static int devm_tcpm_psy_register(struct tcpm_port *port) return PTR_ERR_OR_ZERO(port->psy); } +static enum hrtimer_restart state_machine_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, state_machine_timer); + + kthread_queue_work(port->wq, &port->state_machine); + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart vdm_state_machine_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, vdm_state_machine_timer); + + kthread_queue_work(port->wq, &port->vdm_state_machine); + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart enable_frs_timer_handler(struct hrtimer *timer) +{ + struct tcpm_port *port = container_of(timer, struct tcpm_port, enable_frs_timer); + + kthread_queue_work(port->wq, &port->enable_frs); + return HRTIMER_NORESTART; +} + struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) { struct tcpm_port *port; @@ -4829,12 +5086,21 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) mutex_init(&port->lock); mutex_init(&port->swap_lock); - port->wq = create_singlethread_workqueue(dev_name(dev)); - if (!port->wq) - return ERR_PTR(-ENOMEM); - INIT_DELAYED_WORK(&port->state_machine, tcpm_state_machine_work); - INIT_DELAYED_WORK(&port->vdm_state_machine, vdm_state_machine_work); - INIT_WORK(&port->event_work, tcpm_pd_event_handler); + port->wq = kthread_create_worker(0, dev_name(dev)); + if (IS_ERR(port->wq)) + return ERR_CAST(port->wq); + sched_set_fifo(port->wq->task); + + kthread_init_work(&port->state_machine, tcpm_state_machine_work); + kthread_init_work(&port->vdm_state_machine, vdm_state_machine_work); + kthread_init_work(&port->event_work, tcpm_pd_event_handler); + kthread_init_work(&port->enable_frs, tcpm_enable_frs_work); + hrtimer_init(&port->state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->state_machine_timer.function = state_machine_timer_handler; + hrtimer_init(&port->vdm_state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->vdm_state_machine_timer.function = vdm_state_machine_timer_handler; + hrtimer_init(&port->enable_frs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + port->enable_frs_timer.function = enable_frs_timer_handler; spin_lock_init(&port->pd_event_lock); @@ -4886,7 +5152,7 @@ out_role_sw_put: usb_role_switch_put(port->role_sw); out_destroy_wq: tcpm_debugfs_exit(port); - destroy_workqueue(port->wq); + kthread_destroy_worker(port->wq); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(tcpm_register_port); @@ -4901,7 +5167,7 @@ void tcpm_unregister_port(struct tcpm_port *port) typec_unregister_port(port->typec_port); usb_role_switch_put(port->role_sw); tcpm_debugfs_exit(port); - destroy_workqueue(port->wq); + kthread_destroy_worker(port->wq); } EXPORT_SYMBOL_GPL(tcpm_unregister_port); diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index e4b96674c405..4ce6c6a45eb1 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -755,13 +755,7 @@ EXPORT_SYMBOL_GPL(usbip_recv_xbuff); static int __init usbip_core_init(void) { - int ret; - - ret = usbip_init_eh(); - if (ret) - return ret; - - return 0; + return usbip_init_eh(); } static void __exit usbip_core_exit(void) diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 1b598db5d8b9..66cde5e5f796 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -797,8 +797,14 @@ no_need_xmit: usb_hcd_unlink_urb_from_ep(hcd, urb); no_need_unlink: spin_unlock_irqrestore(&vhci->lock, flags); - if (!ret) + if (!ret) { + /* usb_hcd_giveback_urb() should be called with + * irqs disabled + */ + local_irq_disable(); usb_hcd_giveback_urb(hcd, urb, urb->status); + local_irq_enable(); + } return ret; } diff --git a/include/dt-bindings/phy/phy-cadence-torrent.h b/include/dt-bindings/phy/phy-cadence-torrent.h new file mode 100644 index 000000000000..e387b6a95741 --- /dev/null +++ b/include/dt-bindings/phy/phy-cadence-torrent.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for Cadence Torrent SERDES. + */ + +#ifndef _DT_BINDINGS_TORRENT_SERDES_H +#define _DT_BINDINGS_TORRENT_SERDES_H + +#define TORRENT_SERDES_NO_SSC 0 +#define TORRENT_SERDES_EXTERNAL_SSC 1 +#define TORRENT_SERDES_INTERNAL_SSC 2 + +#endif /* _DT_BINDINGS_TORRENT_SERDES_H */ diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h index 36e8c241cf48..887a31b250a8 100644 --- a/include/dt-bindings/phy/phy.h +++ b/include/dt-bindings/phy/phy.h @@ -19,5 +19,6 @@ #define PHY_TYPE_DP 6 #define PHY_TYPE_XPCS 7 #define PHY_TYPE_SGMII 8 +#define PHY_TYPE_QSGMII 9 #endif /* _DT_BINDINGS_PHY */ diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h new file mode 100644 index 000000000000..1a4f4c792723 --- /dev/null +++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Nicolas Saenz Julienne + * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com> + */ + +#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H +#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H + +#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0 +#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1 + +#endif diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h index bc89ac625f26..2c8860e406bd 100644 --- a/include/linux/iopoll.h +++ b/include/linux/iopoll.h @@ -60,8 +60,7 @@ /** * read_poll_timeout_atomic - Periodically poll an address until a condition is * met or a timeout occurs - * @op: accessor function (takes @addr as its only argument) - * @addr: Address to poll + * @op: accessor function (takes @args as its arguments) * @val: Variable to read the value into * @cond: Break condition (usually involving @val) * @delay_us: Time to udelay between reads in us (0 tight-loops). Should @@ -69,6 +68,7 @@ * Documentation/timers/timers-howto.rst). * @timeout_us: Timeout in us, 0 means never timeout * @delay_before_read: if it is true, delay @delay_us before read. + * @args: arguments for @op poll * * Returns 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index bcee8eba62b3..e435bdb0bab3 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -115,10 +115,12 @@ struct phy_ops { /** * struct phy_attrs - represents phy attributes * @bus_width: Data path width implemented by PHY + * @max_link_rate: Maximum link rate supported by PHY (in Mbps) * @mode: PHY mode */ struct phy_attrs { u32 bus_width; + u32 max_link_rate; enum phy_mode mode; }; diff --git a/include/linux/usb.h b/include/linux/usb.h index 20c555db4621..7d72c4e0713c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1764,6 +1764,7 @@ static inline int usb_urb_dir_out(struct urb *urb) return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT; } +int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe); int usb_urb_ep_type_check(const struct urb *urb); void *usb_alloc_coherent(struct usb_device *dev, size_t size, @@ -1801,6 +1802,14 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, int timeout); /* wrappers around usb_control_msg() for the most common standard requests */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *data, __u16 size, int timeout, + gfp_t memflags); +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *data, __u16 size, int timeout, + gfp_t memflags); extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); extern int usb_get_status(struct usb_device *dev, diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 52ce1f6b8f83..e7351d64f11f 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -436,6 +436,7 @@ struct usb_gadget { }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) +/* Interface to the device model */ static inline void set_gadget_data(struct usb_gadget *gadget, void *data) { dev_set_drvdata(&gadget->dev, data); } static inline void *get_gadget_data(struct usb_gadget *gadget) @@ -444,6 +445,26 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) { return container_of(dev, struct usb_gadget, dev); } +static inline struct usb_gadget *usb_get_gadget(struct usb_gadget *gadget) +{ + get_device(&gadget->dev); + return gadget; +} +static inline void usb_put_gadget(struct usb_gadget *gadget) +{ + put_device(&gadget->dev); +} +extern void usb_initialize_gadget(struct device *parent, + struct usb_gadget *gadget, void (*release)(struct device *dev)); +extern int usb_add_gadget(struct usb_gadget *gadget); +extern void usb_del_gadget(struct usb_gadget *gadget); + +/* Legacy device-model interface */ +extern int usb_add_gadget_udc_release(struct device *parent, + struct usb_gadget *gadget, void (*release)(struct device *dev)); +extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); +extern void usb_del_gadget_udc(struct usb_gadget *gadget); +extern char *usb_get_gadget_udc_name(void); /* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */ #define gadget_for_each_ep(tmp, gadget) \ @@ -735,12 +756,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver); */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); -extern int usb_add_gadget_udc_release(struct device *parent, - struct usb_gadget *gadget, void (*release)(struct device *dev)); -extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); -extern void usb_del_gadget_udc(struct usb_gadget *gadget); -extern char *usb_get_gadget_udc_name(void); - /*-------------------------------------------------------------------------*/ /* utility to simplify dealing with string descriptors */ diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index b6c233e79bd4..3a805e2ecbc9 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -219,14 +219,16 @@ enum pd_pdo_type { #define PDO_CURR_MASK 0x3ff #define PDO_PWR_MASK 0x3ff -#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */ -#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */ -#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */ -#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */ -#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */ -#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */ -#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ -#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ +#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */ +#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */ +#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */ +#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */ +#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */ +#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */ +#define PDO_FIXED_FRS_CURR_MASK (BIT(24) | BIT(23)) /* FR_Swap Current (Sink) */ +#define PDO_FIXED_FRS_CURR_SHIFT 23 +#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ #define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) @@ -454,6 +456,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ #define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */ #define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */ +#define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */ #define PD_T_SOURCE_ACTIVITY 45 #define PD_T_SINK_ACTIVITY 135 #define PD_T_SINK_WAIT_CAP 240 @@ -471,8 +474,10 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_VCONN_SOURCE_ON 100 #define PD_T_SINK_REQUEST 100 /* 100 ms minimum */ #define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */ -#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */ -#define PD_T_NEWSRC 250 /* Maximum of 275ms */ +#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */ +#define PD_T_NEWSRC 250 /* Maximum of 275ms */ +#define PD_T_SWAP_SRC_START 20 /* Minimum of 20ms */ +#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */ #define PD_T_DRP_TRY 100 /* 75 - 150 ms */ #define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ @@ -483,5 +488,4 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP) #define PD_N_HARD_RESET_COUNT 2 -#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */ #endif /* __LINUX_USB_PD_H */ diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 89f58760cf48..09762d26fa0c 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -78,8 +78,11 @@ enum tcpm_transmit_type { * automatically if a connection is established. * @try_role: Optional; called to set a preferred role * @pd_transmit:Called to transmit PD message - * @mux: Pointer to multiplexer data * @set_bist_data: Turn on/off bist data mode for compliance testing + * @enable_frs: + * Optional; Called to enable/disable PD 3.0 fast role swap. + * Enabling frs is accessory dependent as not all PD3.0 + * accessories support fast role swap. */ struct tcpc_dev { struct fwnode_handle *fwnode; @@ -105,6 +108,7 @@ struct tcpc_dev { int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, const struct pd_message *msg); int (*set_bist_data)(struct tcpc_dev *dev, bool on); + int (*enable_frs)(struct tcpc_dev *dev, bool enable); }; struct tcpm_port; @@ -114,6 +118,8 @@ void tcpm_unregister_port(struct tcpm_port *port); void tcpm_vbus_change(struct tcpm_port *port); void tcpm_cc_change(struct tcpm_port *port); +void tcpm_sink_frs(struct tcpm_port *port); +void tcpm_sourcing_vbus(struct tcpm_port *port); void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg); void tcpm_pd_transmit_complete(struct tcpm_port *port, diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 9cb1bec94b71..6be558045942 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -268,6 +268,7 @@ int typec_set_mode(struct typec_port *port, int mode); void *typec_get_drvdata(struct typec_port *port); +int typec_find_pwr_opmode(const char *name); int typec_find_orientation(const char *name); int typec_find_port_power_role(const char *name); int typec_find_power_role(const char *name); diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index 3025aca3c358..cc9cdbc66403 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -10,7 +10,6 @@ #include <linux/of_device.h> struct rpi_firmware; -struct pci_dev; enum rpi_firmware_property_status { RPI_FIRMWARE_STATUS_REQUEST = 0, @@ -142,7 +141,6 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); -int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -160,11 +158,6 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } - -static inline int rpi_firmware_init_vl805(struct pci_dev *pdev) -{ - return 0; -} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index 69137c14d0dc..8981e61f2da4 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -158,29 +158,17 @@ static int usb6fire_fw_ihex_init(const struct firmware *fw, static int usb6fire_fw_ezusb_write(struct usb_device *device, int type, int value, char *data, int len) { - int ret; - - ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, 0, data, len, HZ); - if (ret < 0) - return ret; - else if (ret != len) - return -EIO; - return 0; + return usb_control_msg_send(device, 0, type, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, len, HZ, GFP_KERNEL); } static int usb6fire_fw_ezusb_read(struct usb_device *device, int type, int value, char *data, int len) { - int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, - 0, data, len, HZ); - if (ret < 0) - return ret; - else if (ret != len) - return -EIO; - return 0; + return usb_control_msg_recv(device, 0, type, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, len, HZ, GFP_KERNEL); } static int usb6fire_fw_fpga_write(struct usb_device *device, @@ -230,7 +218,7 @@ static int usb6fire_fw_ezusb_upload( /* upload firmware image */ data = 0x01; /* stop ezusb cpu */ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); - if (ret < 0) { + if (ret) { kfree(rec); release_firmware(fw); dev_err(&intf->dev, @@ -242,7 +230,7 @@ static int usb6fire_fw_ezusb_upload( while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */ ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address, rec->data, rec->len); - if (ret < 0) { + if (ret) { kfree(rec); release_firmware(fw); dev_err(&intf->dev, @@ -257,7 +245,7 @@ static int usb6fire_fw_ezusb_upload( if (postdata) { /* write data after firmware has been uploaded */ ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr, postdata, postlen); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload ezusb firmware %s: post urb.\n", fwname); @@ -267,7 +255,7 @@ static int usb6fire_fw_ezusb_upload( data = 0x00; /* resume ezusb cpu */ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload ezusb firmware %s: end message.\n", fwname); @@ -302,7 +290,7 @@ static int usb6fire_fw_fpga_upload( end = fw->data + fw->size; ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0); - if (ret < 0) { + if (ret) { kfree(buffer); release_firmware(fw); dev_err(&intf->dev, @@ -327,7 +315,7 @@ static int usb6fire_fw_fpga_upload( kfree(buffer); ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload fpga firmware: end urb.\n"); return ret; @@ -363,7 +351,7 @@ int usb6fire_fw_init(struct usb_interface *intf) u8 buffer[12]; ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to receive device firmware state.\n"); return ret; diff --git a/sound/usb/helper.c b/sound/usb/helper.c index 4c12cc5b53fd..cf92d7110773 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -63,20 +63,6 @@ void *snd_usb_find_csint_desc(void *buffer, int buflen, void *after, u8 dsubtype return NULL; } -/* check the validity of pipe and EP types */ -int snd_usb_pipe_sanity_check(struct usb_device *dev, unsigned int pipe) -{ - static const int pipetypes[4] = { - PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT - }; - struct usb_host_endpoint *ep; - - ep = usb_pipe_endpoint(dev, pipe); - if (!ep || usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) - return -EINVAL; - return 0; -} - /* * Wrapper for usb_control_msg(). * Allocates a temp buffer to prevent dmaing from/to the stack. @@ -89,7 +75,7 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request, void *buf = NULL; int timeout; - if (snd_usb_pipe_sanity_check(dev, pipe)) + if (usb_pipe_type_check(dev, pipe)) return -EINVAL; if (size > 0) { diff --git a/sound/usb/helper.h b/sound/usb/helper.h index 5e8a18b4e7b9..f5b4c6647e4d 100644 --- a/sound/usb/helper.h +++ b/sound/usb/helper.h @@ -7,7 +7,6 @@ unsigned int snd_usb_combine_bytes(unsigned char *bytes, int size); void *snd_usb_find_desc(void *descstart, int desclen, void *after, u8 dtype); void *snd_usb_find_csint_desc(void *descstart, int desclen, void *after, u8 dsubtype); -int snd_usb_pipe_sanity_check(struct usb_device *dev, unsigned int pipe); int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *data, __u16 size); diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c index a148caa5f48e..d942179ca095 100644 --- a/sound/usb/hiface/pcm.c +++ b/sound/usb/hiface/pcm.c @@ -156,16 +156,14 @@ static int hiface_pcm_set_rate(struct pcm_runtime *rt, unsigned int rate) * This control message doesn't have any ack from the * other side */ - ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), - HIFACE_SET_RATE_REQUEST, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, - rate_value, 0, NULL, 0, 100); - if (ret < 0) { + ret = usb_control_msg_send(device, 0, + HIFACE_SET_RATE_REQUEST, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + rate_value, 0, NULL, 0, 100, GFP_KERNEL); + if (ret) dev_err(&device->dev, "Error setting samplerate %d.\n", rate); - return ret; - } - return 0; + return ret; } static struct pcm_substream *hiface_pcm_get_substream(struct snd_pcm_substream diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 60674ce4879b..a030dd65eb28 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -337,23 +337,18 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, { struct usb_device *usbdev = line6->usbdev; int ret; - unsigned char *len; + u8 len; unsigned count; if (address > 0xffff || datalen > 0xff) return -EINVAL; - len = kmalloc(1, GFP_KERNEL); - if (!len) - return -ENOMEM; - /* query the serial number: */ - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - (datalen << 8) | 0x21, address, - NULL, 0, LINE6_TIMEOUT * HZ); - - if (ret < 0) { + ret = usb_control_msg_send(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + (datalen << 8) | 0x21, address, NULL, 0, + LINE6_TIMEOUT * HZ, GFP_KERNEL); + if (ret) { dev_err(line6->ifcdev, "read request failed (error %d)\n", ret); goto exit; } @@ -362,45 +357,42 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) { mdelay(LINE6_READ_WRITE_STATUS_DELAY); - ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | - USB_DIR_IN, - 0x0012, 0x0000, len, 1, - LINE6_TIMEOUT * HZ); - if (ret < 0) { + ret = usb_control_msg_recv(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0012, 0x0000, &len, 1, + LINE6_TIMEOUT * HZ, GFP_KERNEL); + if (ret) { dev_err(line6->ifcdev, "receive length failed (error %d)\n", ret); goto exit; } - if (*len != 0xff) + if (len != 0xff) break; } ret = -EIO; - if (*len == 0xff) { + if (len == 0xff) { dev_err(line6->ifcdev, "read failed after %d retries\n", count); goto exit; - } else if (*len != datalen) { + } else if (len != datalen) { /* should be equal or something went wrong */ dev_err(line6->ifcdev, "length mismatch (expected %d, got %d)\n", - (int)datalen, (int)*len); + (int)datalen, len); goto exit; } /* receive the result: */ - ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0013, 0x0000, data, datalen, - LINE6_TIMEOUT * HZ); - - if (ret < 0) + ret = usb_control_msg_recv(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ, + GFP_KERNEL); + if (ret) dev_err(line6->ifcdev, "read failed (error %d)\n", ret); exit: - kfree(len); return ret; } EXPORT_SYMBOL_GPL(line6_read_data); @@ -423,12 +415,11 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data, if (!status) return -ENOMEM; - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - 0x0022, address, data, datalen, - LINE6_TIMEOUT * HZ); - - if (ret < 0) { + ret = usb_control_msg_send(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x0022, address, data, datalen, LINE6_TIMEOUT * HZ, + GFP_KERNEL); + if (ret) { dev_err(line6->ifcdev, "write request failed (error %d)\n", ret); goto exit; @@ -437,14 +428,11 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data, for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) { mdelay(LINE6_READ_WRITE_STATUS_DELAY); - ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), - 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | - USB_DIR_IN, - 0x0012, 0x0000, - status, 1, LINE6_TIMEOUT * HZ); - - if (ret < 0) { + ret = usb_control_msg_recv(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0012, 0x0000, status, 1, LINE6_TIMEOUT * HZ, + GFP_KERNEL); + if (ret) { dev_err(line6->ifcdev, "receiving status failed (error %d)\n", ret); goto exit; diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index eef45f7fef0d..28794a35949d 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -183,29 +183,25 @@ static const struct attribute_group podhd_dev_attr_group = { static int podhd_dev_start(struct usb_line6_podhd *pod) { int ret; - u8 *init_bytes; + u8 init_bytes[8]; int i; struct usb_device *usbdev = pod->line6.usbdev; - init_bytes = kmalloc(8, GFP_KERNEL); - if (!init_bytes) - return -ENOMEM; - - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), + ret = usb_control_msg_send(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, 0x11, 0, - NULL, 0, LINE6_TIMEOUT * HZ); - if (ret < 0) { + NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL); + if (ret) { dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret); goto exit; } /* NOTE: looks like some kind of ping message */ - ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, + ret = usb_control_msg_recv(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0x11, 0x0, - init_bytes, 3, LINE6_TIMEOUT * HZ); - if (ret < 0) { + init_bytes, 3, LINE6_TIMEOUT * HZ, GFP_KERNEL); + if (ret) { dev_err(pod->line6.ifcdev, "receive length failed (error %d)\n", ret); goto exit; @@ -220,13 +216,12 @@ static int podhd_dev_start(struct usb_line6_podhd *pod) goto exit; } - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), + ret = usb_control_msg_send(usbdev, 0, USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT, 1, 0, - NULL, 0, LINE6_TIMEOUT * HZ); + NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL); exit: - kfree(init_bytes); return ret; } diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 94dd5e7ab2e6..4e5693c97aa4 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -126,11 +126,12 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) { int ret; - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ); + ret = usb_control_msg_send(usbdev, 0, 0x67, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ, + GFP_KERNEL); - if (ret < 0) { + if (ret) { dev_err(&usbdev->dev, "send failed (error %d)\n", ret); return ret; } diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 0ffff7640892..9609c6d9655c 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -1978,7 +1978,7 @@ static int scarlett2_mixer_status_create(struct usb_mixer_interface *mixer) return 0; } - if (snd_usb_pipe_sanity_check(dev, pipe)) + if (usb_pipe_type_check(dev, pipe)) return -EINVAL; mixer->urb = usb_alloc_urb(0, GFP_KERNEL); diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 892296df131d..b4fa80ef730d 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -856,7 +856,7 @@ static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; void *buf; - if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x05))) + if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x05))) return -EINVAL; buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); if (!buf) @@ -885,8 +885,6 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) { int ret; - if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) - return -EINVAL; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, NULL, 0, 1000); @@ -994,8 +992,6 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n"); - if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) - return -EINVAL; /* If the Axe-Fx III has not fully booted, it will timeout when trying * to enable the audio streaming interface. A more generous timeout is * used here to detect when the Axe-Fx III has finished booting as the @@ -1028,7 +1024,7 @@ static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf, { int err, actual_length; - if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x01))) + if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x01))) return -EINVAL; err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length, &actual_length, 1000); @@ -1040,7 +1036,7 @@ static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf, memset(buf, 0, buf_size); - if (snd_usb_pipe_sanity_check(dev, usb_rcvintpipe(dev, 0x82))) + if (usb_pipe_type_check(dev, usb_rcvintpipe(dev, 0x82))) return -EINVAL; err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size, &actual_length, 1000); @@ -1127,8 +1123,6 @@ static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev) { int ret; - if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) - return -EINVAL; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0, 0, NULL, 0, 1000); diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index f86f7a61fb36..6e1bfe894dd5 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -82,40 +82,13 @@ static int us144_create_usbmidi(struct snd_card *card) &US122L(card)->midi_list, &quirk); } -/* - * Wrapper for usb_control_msg(). - * Allocates a temp buffer to prevent dmaing from/to the stack. - */ -static int us122l_ctl_msg(struct usb_device *dev, unsigned int pipe, - __u8 request, __u8 requesttype, - __u16 value, __u16 index, void *data, - __u16 size, int timeout) -{ - int err; - void *buf = NULL; - - if (size > 0) { - buf = kmemdup(data, size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - } - err = usb_control_msg(dev, pipe, request, requesttype, - value, index, buf, size, timeout); - if (size > 0) { - memcpy(data, buf, size); - kfree(buf); - } - return err; -} - static void pt_info_set(struct usb_device *dev, u8 v) { int ret; - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 'I', - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - v, 0, NULL, 0, 1000); + ret = usb_control_msg_send(dev, 0, 'I', + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + v, 0, NULL, 0, 1000, GFP_NOIO); snd_printdd(KERN_DEBUG "%i\n", ret); } @@ -305,10 +278,11 @@ static int us122l_set_sample_rate(struct usb_device *dev, int rate) data[0] = rate; data[1] = rate >> 8; data[2] = rate >> 16; - err = us122l_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, - USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT, - UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000); - if (err < 0) + err = usb_control_msg_send(dev, 0, UAC_SET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, + 1000, GFP_NOIO); + if (err) snd_printk(KERN_ERR "%d: cannot set freq %d to ep 0x%x\n", dev->devnum, rate, ep); return err; |