diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-03 20:04:16 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-07-03 20:04:16 -0700 |
| commit | 9a715cd54347948e74f1a597da22884af287727d (patch) | |
| tree | 0a824e6501e9a8dcb3fdd05749e13c149e7dfb9f | |
| parent | cbcd4f08aa637b74f575268770da86a00fabde6d (diff) | |
| parent | a6d7514b14a6ea2a3868bdcb2fca7b2410738595 (diff) | |
| download | linux-9a715cd54347948e74f1a597da22884af287727d.tar.gz | |
Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large tty/serial patchset for 4.13-rc1.
A lot of tty and serial driver updates are in here, along with some
fixups for some __get/put_user usages that were reported. Nothing
huge, just lots of development by a number of different developers,
full details in the shortlog.
All of these have been in linux-next for a while"
* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty: serial: lpuart: add a more accurate baud rate calculation method
tty: serial: lpuart: add earlycon support for imx7ulp
tty: serial: lpuart: add imx7ulp support
dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
tty: serial: lpuart: add little endian 32 bit register support
tty: serial: lpuart: refactor lpuart32_{read|write} prototype
tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
serial: imx-serial - move DMA buffer configuration to DT
serial: imx: Enable RTSD only when needed
serial: imx: Remove unused members from imx_port struct
serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
serial: 8250: Fix THRE flag usage for CAP_MINI
tty/serial: meson_uart: update to stable bindings
dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
serial: Delete dead code for CIR serial ports
serial: sirf: make of_device_ids const
serial/mpsc: switch to dma_alloc_attrs
tty: serial: Add Actions Semi Owl UART earlycon
dt-bindings: serial: Document Actions Semi Owl UARTs
tty/serial: atmel: make the driver DT only
...
66 files changed, 1405 insertions, 712 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart new file mode 100644 index 000000000000..8062953ce77b --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart @@ -0,0 +1,15 @@ +What: /sys/bus/platform/drivers/aspeed-vuart/*/lpc_address +Date: April 2017 +Contact: Jeremy Kerr <jk@ozlabs.org> +Description: Configures which IO port the host side of the UART + will appear on the host <-> BMC LPC bus. +Users: OpenBMC. Proposed changes should be mailed to + openbmc@lists.ozlabs.org + +What: /sys/bus/platform/drivers/aspeed-vuart*/sirq +Date: April 2017 +Contact: Jeremy Kerr <jk@ozlabs.org> +Description: Configures which interrupt number the host side of + the UART will appear on the host <-> BMC LPC bus. +Users: OpenBMC. Proposed changes should be mailed to + openbmc@lists.ozlabs.org diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 9b0b3dea6326..d4c3b6c6ef92 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -954,6 +954,12 @@ must already be setup and configured. Options are not yet supported. + owl,<addr> + Start an early, polled-mode console on a serial port + of an Actions Semi SoC, such as S500 or S900, at the + specified address. The serial port must already be + setup and configured. Options are not yet supported. + smh Use ARM semihosting calls for early console. s3c2410,<addr> diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 10276a46ecef..419ff6c0a47f 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -20,6 +20,8 @@ Required properties: - "fsl,16550-FIFO64" - "fsl,ns16550" - "ti,da830-uart" + - "aspeed,ast2400-vuart" + - "aspeed,ast2500-vuart" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. @@ -45,6 +47,7 @@ Optional properties: property. - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. +- resets : phandle + reset specifier pairs Note: * fsl,ns16550: diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt new file mode 100644 index 000000000000..aa873eada02d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt @@ -0,0 +1,16 @@ +Actions Semi Owl UART + +Required properties: +- compatible : "actions,s500-uart", "actions,owl-uart" for S500 + "actions,s900-uart", "actions,owl-uart" for S900 +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. + + +Example: + + uart3: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt new file mode 100644 index 000000000000..8ff65fa632fd --- /dev/null +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt @@ -0,0 +1,38 @@ +Amlogic Meson SoC UART Serial Interface +======================================= + +The Amlogic Meson SoC UART Serial Interface is present on a large range +of SoCs, and can be present either in the "Always-On" power domain or the +"Everything-Else" power domain. + +The particularity of the "Always-On" Serial Interface is that the hardware +is active since power-on and does not need any clock gating and is usable +as very early serial console. + +Required properties: +- compatible : compatible: value should be different for each SoC family as : + - Meson6 : "amlogic,meson6-uart" + - Meson8 : "amlogic,meson8-uart" + - Meson8b : "amlogic,meson8b-uart" + - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart" + eventually followed by : "amlogic,meson-ao-uart" if this UART interface + is in the "Always-On" power domain. +- reg : offset and length of the register set for the device. +- interrupts : identifier to the device interrupt +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock names. +- clocks-names : + * "xtal" for external xtal clock identifier + * "pclk" for the bus core clock, either the clk81 clock or the gate clock + * "baud" for the source of the baudrate generator, can be either the xtal + or the pclk. + +e.g. +uart_A: serial@84c0 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + /* Use xtal as baud rate clock source */ + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5..e6b572409cf5 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,6 +9,7 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- fsl,dma-size : Indicate the size of the DMA buffer and its periods Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. @@ -28,4 +29,5 @@ uart1: serial@73fbc000 { interrupts = <31>; uart-has-rtscts; fsl,dte-mode; + fsl,dma-size = <1024 4>; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index c95005efbcb8..a1252a047f78 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -6,6 +6,8 @@ Required properties: on Vybrid vf610 SoC with 8-bit register organization - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated on LS1021A SoC with 32-bit big-endian register organization + - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated + on i.MX7ULP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt index a5d91126a8f7..875361bb7cb4 100644 --- a/Documentation/serial/n_gsm.txt +++ b/Documentation/serial/n_gsm.txt @@ -77,6 +77,13 @@ for example, it's possible : 6- first close all virtual ports before closing the physical port. +Note that after closing the physical port the modem is still in multiplexing +mode. This may prevent a successful re-opening of the port later. To avoid +this situation either reset the modem if your hardware allows that or send +a disconnect command frame manually before initializing the multiplexing mode +for the second time. The byte sequence for the disconnect command frame is: +0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. + Additional Documentation ------------------------ More practical details on the protocol and how it's supported by industrial diff --git a/MAINTAINERS b/MAINTAINERS index 209abdaab854..d2363ec87445 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8446,7 +8446,7 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git S: Supported F: arch/microblaze/ -MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER +MICROCHIP / ATMEL AT91 SERIAL DRIVER M: Richard Genoud <richard.genoud@gmail.com> S: Maintained F: drivers/tty/serial/atmel_serial.c diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h index f30c94ae1bdb..ff67b8373bf7 100644 --- a/arch/alpha/include/uapi/asm/ioctls.h +++ b/arch/alpha/include/uapi/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index de8cba121013..70d52e9bb575 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -387,19 +387,6 @@ static int activate(struct tty_port *port, struct tty_struct *tty) } state->xmit.head = state->xmit.tail = 0; - - /* - * Set up the tty->alt_speed kludge - */ - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - errout: local_irq_restore(flags); return retval; diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h index 740219c2c894..68e19b689a00 100644 --- a/arch/mips/include/uapi/asm/ioctls.h +++ b/arch/mips/include/uapi/asm/ioctls.h @@ -91,6 +91,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h index b6572f051b67..674c68a5bbd0 100644 --- a/arch/parisc/include/uapi/asm/ioctls.h +++ b/arch/parisc/include/uapi/asm/ioctls.h @@ -60,6 +60,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h index 49a25796a61a..bfd609a3e928 100644 --- a/arch/powerpc/include/uapi/asm/ioctls.h +++ b/arch/powerpc/include/uapi/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h index c9903e56ccf4..eec7901e9e65 100644 --- a/arch/sh/include/uapi/asm/ioctls.h +++ b/arch/sh/include/uapi/asm/ioctls.h @@ -93,6 +93,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h index 06b3f6c3bb9a..6d27398632ea 100644 --- a/arch/sparc/include/uapi/asm/ioctls.h +++ b/arch/sparc/include/uapi/asm/ioctls.h @@ -27,7 +27,7 @@ #define TIOCGRS485 _IOR('T', 0x41, struct serial_rs485) #define TIOCSRS485 _IOWR('T', 0x42, struct serial_rs485) -/* Note that all the ioctls that are not available in Linux have a +/* Note that all the ioctls that are not available in Linux have a * double underscore on the front to: a) avoid some programs to * think we support some ioctls under Linux (autoconfiguration stuff) */ @@ -88,6 +88,7 @@ #define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ #define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ #define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */ +#define TIOCGPTPEER _IOR('t', 137, int) /* Safely open the slave */ /* Little f */ #define FIOCLEX _IO('f', 1) diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h index 518954e74e6d..98b004e24e85 100644 --- a/arch/xtensa/include/uapi/asm/ioctls.h +++ b/arch/xtensa/include/uapi/asm/ioctls.h @@ -105,6 +105,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index f02becdb3e33..8689279afdf1 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o \ - tty_ldsem.o tty_baudrate.o tty_jobctrl.o + tty_ldsem.o tty_baudrate.o tty_jobctrl.o \ + n_null.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index dea16bb8c46a..9820e20993db 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -570,18 +570,6 @@ static int startup(struct tty_struct *tty, struct serial_state *info) info->xmit.head = info->xmit.tail = 0; /* - * Set up the tty->alt_speed kludge - */ - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - - /* * and set the speed of the serial port */ change_speed(tty, info, NULL); @@ -1084,14 +1072,9 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, check_and_exit: if (tty_port_initialized(port)) { if (change_spd) { - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; + /* warn about deprecation unless clearing */ + if (new_serial.flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); change_speed(tty, state, NULL); } } else diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 104f09c58163..d272bc4e7fb5 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1975,18 +1975,6 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) cflag = tty->termios.c_cflag; iflag = tty->termios.c_iflag; - /* - * Set up the tty->alt_speed kludge - */ - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - card = info->card; channel = info->line - card->first_line; @@ -2295,12 +2283,16 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, struct serial_struct __user *new_info) { struct serial_struct new_serial; + int old_flags; int ret; if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) return -EFAULT; mutex_lock(&info->port.mutex); + + old_flags = info->port.flags; + if (!capable(CAP_SYS_ADMIN)) { if (new_serial.close_delay != info->port.close_delay || new_serial.baud_base != info->baud || @@ -2332,6 +2324,11 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty, check_and_exit: if (tty_port_initialized(&info->port)) { + if ((new_serial.flags ^ old_flags) & ASYNC_SPD_MASK) { + /* warn about deprecation unless clearing */ + if (new_serial.flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } cy_set_line_char(info, tty); ret = 0; } else { diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 99bb875178d7..423e28ec27fb 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1242,8 +1242,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) free_irq(irq, hvcsd); return; } else if (hvcsd->port.count < 0) { - printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" - " is missmanaged.\n", + printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n", hvcsd->vdev->unit_address, hvcsd->port.count); } diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 2667a205a5ab..363a8ca824ad 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2015,6 +2015,33 @@ static void gsm_error(struct gsm_mux *gsm, gsm->io_error++; } +static int gsm_disconnect(struct gsm_mux *gsm) +{ + struct gsm_dlci *dlci = gsm->dlci[0]; + struct gsm_control *gc; + + if (!dlci) + return 0; + + /* In theory disconnecting DLCI 0 is sufficient but for some + modems this is apparently not the case. */ + gc = gsm_control_send(gsm, CMD_CLD, NULL, 0); + if (gc) + gsm_control_wait(gsm, gc); + + del_timer_sync(&gsm->t2_timer); + /* Now we are sure T2 has stopped */ + + gsm_dlci_begin_close(dlci); + wait_event_interruptible(gsm->event, + dlci->state == DLCI_CLOSED); + + if (signal_pending(current)) + return -EINTR; + + return 0; +} + /** * gsm_cleanup_mux - generic GSM protocol cleanup * @gsm: our mux @@ -2029,7 +2056,6 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm) int i; struct gsm_dlci *dlci = gsm->dlci[0]; struct gsm_msg *txq, *ntxq; - struct gsm_control *gc; gsm->dead = 1; @@ -2045,21 +2071,11 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm) if (i == MAX_MUX) return; - /* In theory disconnecting DLCI 0 is sufficient but for some - modems this is apparently not the case. */ - if (dlci) { - gc = gsm_control_send(gsm, CMD_CLD, NULL, 0); - if (gc) - gsm_control_wait(gsm, gc); - } del_timer_sync(&gsm->t2_timer); /* Now we are sure T2 has stopped */ - if (dlci) { + if (dlci) dlci->dead = 1; - gsm_dlci_begin_close(dlci); - wait_event_interruptible(gsm->event, - dlci->state == DLCI_CLOSED); - } + /* Free up any link layer users */ mutex_lock(&gsm->mutex); for (i = 0; i < NUM_DLCI; i++) @@ -2519,12 +2535,12 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, */ if (need_close || need_restart) { - gsm_dlci_begin_close(gsm->dlci[0]); - /* This will timeout if the link is down due to N2 expiring */ - wait_event_interruptible(gsm->event, - gsm->dlci[0]->state == DLCI_CLOSED); - if (signal_pending(current)) - return -EINTR; + int ret; + + ret = gsm_disconnect(gsm); + + if (ret) + return ret; } if (need_restart) gsm_cleanup_mux(gsm); diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c new file mode 100644 index 000000000000..d63261c36e42 --- /dev/null +++ b/drivers/tty/n_null.c @@ -0,0 +1,80 @@ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/module.h> + +/* + * n_null.c - Null line discipline used in the failure path + * + * Copyright (C) Intel 2017 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +static int n_null_open(struct tty_struct *tty) +{ + return 0; +} + +static void n_null_close(struct tty_struct *tty) +{ +} + +static ssize_t n_null_read(struct tty_struct *tty, struct file *file, + unsigned char __user * buf, size_t nr) +{ + return -EOPNOTSUPP; +} + +static ssize_t n_null_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) +{ + return -EOPNOTSUPP; +} + +static void n_null_receivebuf(struct tty_struct *tty, + const unsigned char *cp, char *fp, + int cnt) +{ +} + +static struct tty_ldisc_ops null_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_null", + .open = n_null_open, + .close = n_null_close, + .read = n_null_read, + .write = n_null_write, + .receive_buf = n_null_receivebuf +}; + +static int __init n_null_init(void) +{ + BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc)); + return 0; +} + +static void __exit n_null_exit(void) +{ + tty_unregister_ldisc(N_NULL); +} + +module_init(n_null_init); +module_exit(n_null_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alan Cox"); +MODULE_ALIAS_LDISC(N_NULL); +MODULE_DESCRIPTION("Null ldisc driver"); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 65799575c666..d1399aac05a1 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -24,6 +24,9 @@ #include <linux/slab.h> #include <linux/mutex.h> #include <linux/poll.h> +#include <linux/mount.h> +#include <linux/file.h> +#include <linux/ioctl.h> #undef TTY_DEBUG_HANGUP #ifdef TTY_DEBUG_HANGUP @@ -66,8 +69,13 @@ static void pty_close(struct tty_struct *tty, struct file *filp) #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); - if (tty->link->driver_data) - devpts_pty_kill(tty->link->driver_data); + if (tty->link->driver_data) { + struct path *path = tty->link->driver_data; + + devpts_pty_kill(path->dentry); + path_put(path); + kfree(path); + } mutex_unlock(&devpts_mutex); } #endif @@ -440,6 +448,48 @@ err: return retval; } +/** + * pty_open_peer - open the peer of a pty + * @tty: the peer of the pty being opened + * + * Open the cached dentry in tty->link, providing a safe way for userspace + * to get the slave end of a pty (where they have the master fd and cannot + * access or trust the mount namespace /dev/pts was mounted inside). + */ +static struct file *pty_open_peer(struct tty_struct *tty, int flags) +{ + if (tty->driver->subtype != PTY_TYPE_MASTER) + return ERR_PTR(-EIO); + return dentry_open(tty->link->driver_data, flags, current_cred()); +} + +static int pty_get_peer(struct tty_struct *tty, int flags) +{ + int fd = -1; + struct file *filp = NULL; + int retval = -EINVAL; + + fd = get_unused_fd_flags(0); + if (fd < 0) { + retval = fd; + goto err; + } + + filp = pty_open_peer(tty, flags); + if (IS_ERR(filp)) { + retval = PTR_ERR(filp); + goto err_put; + } + + fd_install(fd, filp); + return fd; + +err_put: + put_unused_fd(fd); +err: + return retval; +} + static void pty_cleanup(struct tty_struct *tty) { tty_port_put(tty->port); @@ -481,6 +531,16 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static long pty_bsd_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_bsd_ioctl(tty, cmd, arg); +} + static int legacy_count = CONFIG_LEGACY_PTY_COUNT; /* * not really modular, but the easiest way to keep compat with existing @@ -502,6 +562,7 @@ static const struct tty_operations master_pty_ops_bsd = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_bsd_ioctl, + .compat_ioctl = pty_bsd_compat_ioctl, .cleanup = pty_cleanup, .resize = pty_resize, .remove = pty_remove @@ -602,6 +663,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); + case TIOCGPTPEER: /* Open the other end */ + return pty_get_peer(tty, (int) arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); } @@ -609,6 +672,16 @@ static int pty_unix98_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static long pty_unix98_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_unix98_ioctl(tty, cmd, arg); +} + /** * ptm_unix98_lookup - find a pty master * @driver: ptm driver @@ -681,6 +754,7 @@ static const struct tty_operations ptm_unix98_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .ioctl = pty_unix98_ioctl, + .compat_ioctl = pty_unix98_compat_ioctl, .resize = pty_resize, .cleanup = pty_cleanup }; @@ -718,6 +792,7 @@ static int ptmx_open(struct inode *inode, struct file *filp) { struct pts_fs_info *fsi; struct tty_struct *tty; + struct path *pts_path; struct dentry *dentry; int retval; int index; @@ -771,16 +846,26 @@ static int ptmx_open(struct inode *inode, struct file *filp) retval = PTR_ERR(dentry); goto err_release; } - tty->link->driver_data = dentry; + /* We need to cache a fake path for TIOCGPTPEER. */ + pts_path = kmalloc(sizeof(struct path), GFP_KERNEL); + if (!pts_path) + goto err_release; + pts_path->mnt = filp->f_path.mnt; + pts_path->dentry = dentry; + path_get(pts_path); + tty->link->driver_data = pts_path; retval = ptm_driver->ops->open(tty, filp); if (retval) - goto err_release; + goto err_path_put; tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); tty_unlock(tty); return 0; +err_path_put: + path_put(pts_path); + kfree(pts_path); err_release: tty_unlock(tty); // This will also put-ref the fsi diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index b51a877da986..20d79a6007d5 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -947,18 +947,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp) tty_port_set_initialized(&info->port, 1); - /* - * Set up the tty->alt_speed kludge - */ - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; - configure_r_port(tty, info, NULL); if (C_BAUD(tty)) { sSetDTR(cp); @@ -1219,23 +1207,20 @@ static int set_config(struct tty_struct *tty, struct r_port *info, return -EPERM; } info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(tty, info, NULL); mutex_unlock(&info->port.mutex); return 0; } + if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) { + /* warn about deprecation, unless clearing */ + if (new_serial.flags & ROCKET_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } + info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); info->port.close_delay = new_serial.close_delay; info->port.closing_wait = new_serial.closing_wait; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - tty->alt_speed = 57600; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - tty->alt_speed = 115200; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - tty->alt_speed = 230400; - if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - tty->alt_speed = 460800; mutex_unlock(&info->port.mutex); configure_r_port(tty, info, NULL); diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index d0a021c93986..302018d67efa 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -148,7 +148,7 @@ static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigne /* tty_set_termios() return not checked as it is always 0 */ tty_set_termios(tty, &ktermios); - return speed; + return ktermios.c_ospeed; } static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ce8d4ffcc425..b2bdc35f7495 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -81,6 +81,9 @@ struct serial8250_config { #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: + * STOP PARITY EPAR SPAR WLEN5 WLEN6 + */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c new file mode 100644 index 000000000000..822be4906763 --- /dev/null +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -0,0 +1,323 @@ +/* + * Serial Port driver for Aspeed VUART device + * + * Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp. + * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/device.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/clk.h> + +#include "8250.h" + +#define ASPEED_VUART_GCRA 0x20 +#define ASPEED_VUART_GCRA_VUART_EN BIT(0) +#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5) +#define ASPEED_VUART_GCRB 0x24 +#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4) +#define ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT 4 +#define ASPEED_VUART_ADDRL 0x28 +#define ASPEED_VUART_ADDRH 0x2c + +struct aspeed_vuart { + struct device *dev; + void __iomem *regs; + struct clk *clk; + int line; +}; + +/* + * The VUART is basically two UART 'front ends' connected by their FIFO + * (no actual serial line in between). One is on the BMC side (management + * controller) and one is on the host CPU side. + * + * It allows the BMC to provide to the host a "UART" that pipes into + * the BMC itself and can then be turned by the BMC into a network console + * of some sort for example. + * + * This driver is for the BMC side. The sysfs files allow the BMC + * userspace which owns the system configuration policy, to specify + * at what IO port and interrupt number the host side will appear + * to the host on the Host <-> BMC LPC bus. It could be different on a + * different system (though most of them use 3f8/4). + */ + +static ssize_t lpc_address_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u16 addr; + + addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) | + (readb(vuart->regs + ASPEED_VUART_ADDRL)); + + return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); +} + +static ssize_t lpc_address_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH); + writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL); + + return count; +} + +static DEVICE_ATTR_RW(lpc_address); + +static ssize_t sirq_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg); +} + +static ssize_t sirq_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + u8 reg; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg |= val; + writeb(reg, vuart->regs + ASPEED_VUART_GCRB); + + return count; +} + +static DEVICE_ATTR_RW(sirq); + +static struct attribute *aspeed_vuart_attrs[] = { + &dev_attr_sirq.attr, + &dev_attr_lpc_address.attr, + NULL, +}; + +static const struct attribute_group aspeed_vuart_attr_group = { + .attrs = aspeed_vuart_attrs, +}; + +static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled) +{ + u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + if (enabled) + reg |= ASPEED_VUART_GCRA_VUART_EN; + else + reg &= ~ASPEED_VUART_GCRA_VUART_EN; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, + bool discard) +{ + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + /* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */ + if (!discard) + reg |= ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + else + reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static int aspeed_vuart_startup(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + int rc; + + rc = serial8250_do_startup(uart_port); + if (rc) + return rc; + + aspeed_vuart_set_host_tx_discard(vuart, false); + + return 0; +} + +static void aspeed_vuart_shutdown(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + + aspeed_vuart_set_host_tx_discard(vuart, true); + + serial8250_do_shutdown(uart_port); +} + +static int aspeed_vuart_probe(struct platform_device *pdev) +{ + struct uart_8250_port port; + struct aspeed_vuart *vuart; + struct device_node *np; + struct resource *res; + u32 clk, prop; + int rc; + + np = pdev->dev.of_node; + + vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL); + if (!vuart) + return -ENOMEM; + + vuart->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vuart->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vuart->regs)) + return PTR_ERR(vuart->regs); + + memset(&port, 0, sizeof(port)); + port.port.private_data = vuart; + port.port.membase = vuart->regs; + port.port.mapbase = res->start; + port.port.mapsize = resource_size(res); + port.port.startup = aspeed_vuart_startup; + port.port.shutdown = aspeed_vuart_shutdown; + port.port.dev = &pdev->dev; + + rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + if (rc < 0) + return rc; + + if (of_property_read_u32(np, "clock-frequency", &clk)) { + vuart->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vuart->clk)) { + dev_warn(&pdev->dev, + "clk or clock-frequency not defined\n"); + return PTR_ERR(vuart->clk); + } + + rc = clk_prepare_enable(vuart->clk); + if (rc < 0) + return rc; + + clk = clk_get_rate(vuart->clk); + } + + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &prop) == 0) + port.port.custom_divisor = clk / (16 * prop); + + /* Check for shifted address mapping */ + if (of_property_read_u32(np, "reg-offset", &prop) == 0) + port.port.mapbase += prop; + + /* Check for registers offset within the devices address range */ + if (of_property_read_u32(np, "reg-shift", &prop) == 0) + port.port.regshift = prop; + + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port.port.fifosize = prop; + + /* Check for a fixed line number */ + rc = of_alias_get_id(np, "serial"); + if (rc >= 0) + port.port.line = rc; + + port.port.irq = irq_of_parse_and_map(np, 0); + port.port.irqflags = IRQF_SHARED; + port.port.iotype = UPIO_MEM; + port.port.type = PORT_16550A; + port.port.uartclk = clk; + port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; + + if (of_property_read_bool(np, "no-loopback-test")) + port.port.flags |= UPF_SKIP_TEST; + + if (port.port.fifosize) + port.capabilities = UART_CAP_FIFO; + + if (of_property_read_bool(np, "auto-flow-control")) + port.capabilities |= UART_CAP_AFE; + + rc = serial8250_register_8250_port(&port); + if (rc < 0) + goto err_clk_disable; + + vuart->line = rc; + + aspeed_vuart_set_enabled(vuart, true); + aspeed_vuart_set_host_tx_discard(vuart, true); + platform_set_drvdata(pdev, vuart); + + return 0; + +err_clk_disable: + clk_disable_unprepare(vuart->clk); + irq_dispose_mapping(port.port.irq); + return rc; +} + +static int aspeed_vuart_remove(struct platform_device *pdev) +{ + struct aspeed_vuart *vuart = platform_get_drvdata(pdev); + + aspeed_vuart_set_enabled(vuart, false); + serial8250_unregister_port(vuart->line); + sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + clk_disable_unprepare(vuart->clk); + + return 0; +} + +static const struct of_device_id aspeed_vuart_table[] = { + { .compatible = "aspeed,ast2400-vuart" }, + { .compatible = "aspeed,ast2500-vuart" }, + { }, +}; + +static struct platform_driver aspeed_vuart_driver = { + .driver = { + .name = "aspeed-vuart", + .of_match_table = aspeed_vuart_table, + }, + .probe = aspeed_vuart_probe, + .remove = aspeed_vuart_remove, +}; + +module_platform_driver(aspeed_vuart_driver); + +MODULE_AUTHOR("Jeremy Kerr <jk@ozlabs.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Aspeed VUART device"); diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index e10f1244409b..a23c7da42ea8 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ spin_lock_init(&data->uart.port.lock); - data->uart.capabilities = UART_CAP_FIFO; + data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI; data->uart.port.dev = &pdev->dev; data->uart.port.regshift = 2; data->uart.port.type = PORT_16550; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 1aab3010fbfa..b5def356af63 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->dl_write) uart->dl_write = up->dl_write; - if (uart->port.type != PORT_8250_CIR) { - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); - - ret = uart_add_one_port(&serial8250_reg, - &uart->port); - if (ret == 0) - ret = uart->port.line; - } else { - dev_info(uart->port.dev, - "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", - uart->port.iobase, - (unsigned long long)uart->port.mapbase, - uart->port.irq); + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); - ret = 0; - } + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; } mutex_unlock(&serial_mutex); diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 1270ff163f63..a309bcffffcd 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -109,7 +109,6 @@ pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev, u8 __iomem *p; int err; - port->port.flags |= UPF_EXAR_EFR; port->port.uartclk = baud * 16; err = default_setup(priv, pcidev, idx, offset, port); @@ -171,19 +170,26 @@ pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev, return default_setup(priv, pcidev, idx, offset, port); } -static void setup_gpio(u8 __iomem *p) +static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) { + /* + * The Commtech adapters required the MPIOs to be driven low. The Exar + * devices will export them as GPIOs, so we pre-configure them safely + * as inputs. + */ + u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00; + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); writeb(0x00, p + UART_EXAR_MPIO3T_7_0); writeb(0x00, p + UART_EXAR_MPIOINV_7_0); - writeb(0x00, p + UART_EXAR_MPIOSEL_7_0); + writeb(dir, p + UART_EXAR_MPIOSEL_7_0); writeb(0x00, p + UART_EXAR_MPIOOD_7_0); writeb(0x00, p + UART_EXAR_MPIOINT_15_8); writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); writeb(0x00, p + UART_EXAR_MPIO3T_15_8); writeb(0x00, p + UART_EXAR_MPIOINV_15_8); - writeb(0x00, p + UART_EXAR_MPIOSEL_15_8); + writeb(dir, p + UART_EXAR_MPIOSEL_15_8); writeb(0x00, p + UART_EXAR_MPIOOD_15_8); } @@ -236,7 +242,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, if (idx == 0) { /* Setup Multipurpose Input/Output pins. */ - setup_gpio(p); + setup_gpio(pcidev, p); port->port.private_data = xr17v35x_register_gpio(pcidev); } diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 1cbadafc6889..0cf95fddccfc 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -19,11 +19,13 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> +#include <linux/reset.h> #include "8250.h" struct of_serial_info { struct clk *clk; + struct reset_control *rst; int type; int line; }; @@ -132,6 +134,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev, } } + info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); + if (IS_ERR(info->rst)) + goto out; + ret = reset_control_deassert(info->rst); + if (ret) + goto out; + port->type = type; port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP @@ -229,6 +238,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev) serial8250_unregister_port(info->line); + reset_control_assert(info->rst); if (info->clk) clk_disable_unprepare(info->clk); kfree(info); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index e7e64913a748..833771bca0a5 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart_port *port) up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { @@ -782,8 +786,27 @@ unlock: static void __dma_rx_complete(void *param) { - __dma_rx_do_complete(param); - omap_8250_rx_dma(param); + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct dma_tx_state state; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + + /* + * If the tx status is not DMA_COMPLETE, then this is a delayed + * completion callback. A previous RX timeout flush would have + * already pushed the data, so exit. + */ + if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) != + DMA_COMPLETE) { + spin_unlock_irqrestore(&p->port.lock, flags); + return; + } + __dma_rx_do_complete(p); + omap_8250_rx_dma(p); + + spin_unlock_irqrestore(&p->port.lock, flags); } static void omap_8250_rx_dma_flush(struct uart_8250_port *p) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 68fd045a7025..a5fe0e66c607 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1764,6 +1764,10 @@ void serial8250_tx_chars(struct uart_8250_port *up) if ((up->capabilities & UART_CAP_HFIFO) && (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY) break; + /* The BCM2835 MINI UART THRE bit is really a not-full bit. */ + if ((up->capabilities & UART_CAP_MINI) && + !(serial_in(up, UART_LSR) & UART_LSR_THRE)) + break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -2228,7 +2232,7 @@ int serial8250_do_startup(struct uart_port *port) } } - if (port->irq) { + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; /* * Test for UARTs that do not reassert THRE when the @@ -2585,6 +2589,12 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot, frac = 0; + if (up->capabilities & UART_CAP_MINI) { + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); + if ((termios->c_cflag & CSIZE) == CS5 || + (termios->c_cflag & CSIZE) == CS6) + termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; + } cval = serial8250_compute_lcr(up, termios->c_cflag); baud = serial8250_get_baud_rate(port, termios, old); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 0e3f529d50e9..a1161ec0256f 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -224,6 +224,16 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. +config SERIAL_8250_ASPEED_VUART + tristate "Aspeed Virtual UART" + depends on SERIAL_8250 + depends on OF + help + If you want to use the virtual UART (VUART) device on Aspeed + BMC platforms, enable this option. This enables the 16550A- + compatible device on the local LPC bus, giving a UART device + with no physical RS232 connections. + config SERIAL_8250_BOCA tristate "Support Boca cards" depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 2f30f9ecdb1b..a44a99a3e623 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5c8850f7a2a0..1f096e2bb398 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE If unsure, say Y. config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" + bool "AT91 on-chip serial port support" depends on HAS_DMA - depends on ARCH_AT91 || AVR32 || COMPILE_TEST + depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB help This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. + AT91 processors. config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" + bool "Support for console on AT91 serial port" depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE help Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system + AT91 processor as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user mode). config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" + bool "Support DMA transfers on AT91 serial port" depends on SERIAL_ATMEL default y help Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to + and from the Atmel AT91 serial port. In order to actually use DMA transfers, make sure that the use_dma_tx and use_dma_rx members in the atmel_uart_data struct is set appropriately for each port. @@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT bool "Install as device ttyATn instead of ttySn" depends on SERIAL_ATMEL=y help - Say Y here if you wish to have the internal AT91 / AT32 UARTs + Say Y here if you wish to have the internal AT91 UARTs appear as /dev/ttyATn (major 204, minor starting at 154) instead of the normal /dev/ttySn (major 4, minor starting at 64). This is necessary if you also want other UARTs, such as @@ -1688,6 +1688,25 @@ config SERIAL_MVEBU_CONSOLE and warnings and which allows logins in single user mode) Otherwise, say 'N'. +config SERIAL_OWL + bool "Actions Semi Owl serial port support" + depends on ARCH_ACTIONS || COMPILE_TEST + select SERIAL_CORE + help + This driver is for Actions Semiconductor S500/S900 SoC's UART. + Say 'Y' here if you wish to use the on-board serial port. + Otherwise, say 'N'. + +config SERIAL_OWL_CONSOLE + bool "Console on Actions Semi Owl serial port" + depends on SERIAL_OWL=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART + as the system console. Only earlycon is implemented currently. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 53c03e005132..fe88a75d9a59 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o +obj-$(CONFIG_SERIAL_OWL) += owl-uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index f2f251075109..24180adb1cbb 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -697,6 +697,7 @@ static struct console amba_console = { #define AMBA_CONSOLE NULL #endif +static DEFINE_MUTEX(amba_reg_lock); static struct uart_driver amba_reg = { .owner = THIS_MODULE, .driver_name = "ttyAM", @@ -749,6 +750,19 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id) amba_ports[i] = uap; amba_set_drvdata(dev, uap); + + mutex_lock(&amba_reg_lock); + if (!amba_reg.state) { + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + mutex_unlock(&amba_reg_lock); + dev_err(uap->port.dev, + "Failed to register AMBA-PL010 driver\n"); + return ret; + } + } + mutex_unlock(&amba_reg_lock); + ret = uart_add_one_port(&amba_reg, &uap->port); if (ret) amba_ports[i] = NULL; @@ -760,12 +774,18 @@ static int pl010_remove(struct amba_device *dev) { struct uart_amba_port *uap = amba_get_drvdata(dev); int i; + bool busy = false; uart_remove_one_port(&amba_reg, &uap->port); for (i = 0; i < ARRAY_SIZE(amba_ports); i++) if (amba_ports[i] == uap) amba_ports[i] = NULL; + else if (amba_ports[i]) + busy = true; + + if (!busy) + uart_unregister_driver(&amba_reg); return 0; } @@ -816,23 +836,14 @@ static struct amba_driver pl010_driver = { static int __init pl010_init(void) { - int ret; - printk(KERN_INFO "Serial: AMBA driver\n"); - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl010_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; + return amba_driver_register(&pl010_driver); } static void __exit pl010_exit(void) { amba_driver_unregister(&pl010_driver); - uart_unregister_driver(&amba_reg); } module_init(pl010_init); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index c355ac9abafc..7551cab438ff 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1,5 +1,5 @@ /* - * Driver for Atmel AT91 / AT32 Serial ports + * Driver for Atmel AT91 Serial ports * Copyright (C) 2003 Rick Bronson * * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. @@ -46,6 +46,7 @@ #include <linux/err.h> #include <linux/irq.h> #include <linux/suspend.h> +#include <linux/mm.h> #include <asm/io.h> #include <asm/ioctls.h> @@ -118,7 +119,6 @@ struct atmel_uart_char { /* * at91: 6 USARTs and one DBGU port (SAM9260) - * avr32: 4 * samx7: 3 USARTs and 5 UARTs */ #define ATMEL_MAX_UART 8 @@ -228,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value) __raw_writel(value, port->membase + reg); } -#ifdef CONFIG_AVR32 - -/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */ -static inline u8 atmel_uart_read_char(struct uart_port *port) -{ - return __raw_readl(port->membase + ATMEL_US_RHR); -} - -static inline void atmel_uart_write_char(struct uart_port *port, u8 value) -{ - __raw_writel(value, port->membase + ATMEL_US_THR); -} - -#else - static inline u8 atmel_uart_read_char(struct uart_port *port) { return __raw_readb(port->membase + ATMEL_US_RHR); @@ -253,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) __raw_writeb(value, port->membase + ATMEL_US_THR); } -#endif - #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -959,7 +942,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_tx, virt_to_page(port->state->xmit.buf), UART_XMIT_SIZE, - (unsigned long)port->state->xmit.buf & ~PAGE_MASK); + offset_in_page(port->state->xmit.buf)); nent = dma_map_sg(port->dev, &atmel_port->sg_tx, 1, @@ -1141,7 +1124,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_rx, virt_to_page(ring->buf), sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, - (unsigned long)ring->buf & ~PAGE_MASK); + offset_in_page(ring->buf)); nent = dma_map_sg(port->dev, &atmel_port->sg_rx, 1, @@ -1655,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - /* DMA/PDC usage specification */ - if (of_property_read_bool(np, "atmel,use-dma-rx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_rx = true; - atmel_port->use_pdc_rx = false; - } else { - atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = true; - } + + /* DMA/PDC usage specification */ + if (of_property_read_bool(np, "atmel,use-dma-rx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; } else { atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = false; + atmel_port->use_pdc_rx = true; } + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = false; + } - if (of_property_read_bool(np, "atmel,use-dma-tx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_tx = true; - atmel_port->use_pdc_tx = false; - } else { - atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = true; - } + if (of_property_read_bool(np, "atmel,use-dma-tx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; } else { atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = false; + atmel_port->use_pdc_tx = true; } - } else { - atmel_port->use_pdc_rx = pdata->use_dma_rx; - atmel_port->use_pdc_tx = pdata->use_dma_tx; - atmel_port->use_dma_rx = false; atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = false; } - } static void atmel_init_rs485(struct uart_port *port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - struct serial_rs485 *rs485conf = &port->rs485; - u32 rs485_delay[2]; - /* rs485 properties */ - if (of_property_read_u32_array(np, "rs485-rts-delay", - rs485_delay, 2) == 0) { - rs485conf->delay_rts_before_send = rs485_delay[0]; - rs485conf->delay_rts_after_send = rs485_delay[1]; - rs485conf->flags = 0; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) - rs485conf->flags |= SER_RS485_RX_DURING_TX; + struct serial_rs485 *rs485conf = &port->rs485; + u32 rs485_delay[2]; - if (of_get_property(np, "linux,rs485-enabled-at-boot-time", - NULL)) - rs485conf->flags |= SER_RS485_ENABLED; - } else { - port->rs485 = pdata->rs485; + /* rs485 properties */ + if (of_property_read_u32_array(np, "rs485-rts-delay", + rs485_delay, 2) == 0) { + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + rs485conf->flags = 0; } + if (of_get_property(np, "rs485-rx-during-tx", NULL)) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL)) + rs485conf->flags |= SER_RS485_ENABLED; } static void atmel_set_ops(struct uart_port *port) @@ -2402,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, { int ret; struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); atmel_init_property(atmel_port, pdev); atmel_set_ops(port); @@ -2410,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, atmel_init_rs485(port, pdev); port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &atmel_pops; port->fifosize = 1; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; port->rs485_config = atmel_config_rs485; + port->membase = NULL; memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); - if (pdata && pdata->regs) { - /* Already mapped by setup code */ - port->membase = pdata->regs; - } else { - port->flags |= UPF_IOREMAP; - port->membase = NULL; - } - /* for console, the clock could already be configured */ if (!atmel_port->clk) { atmel_port->clk = clk_get(&pdev->dev, "usart"); @@ -2460,8 +2419,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, return 0; } -struct platform_device *atmel_default_console_device; /* the serial console device */ - #ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void atmel_console_putchar(struct uart_port *port, int ch) { @@ -2594,47 +2551,6 @@ static struct console atmel_console = { #define ATMEL_CONSOLE_DEVICE (&atmel_console) -/* - * Early console initialization (before VM subsystem initialized). - */ -static int __init atmel_console_init(void) -{ - int ret; - if (atmel_default_console_device) { - struct atmel_uart_data *pdata = - dev_get_platdata(&atmel_default_console_device->dev); - int id = pdata->num; - struct atmel_uart_port *atmel_port = &atmel_ports[id]; - - atmel_port->backup_imr = 0; - atmel_port->uart.line = id; - - add_preferred_console(ATMEL_DEVICENAME, id, NULL); - ret = atmel_init_port(atmel_port, atmel_default_console_device); - if (ret) - return ret; - register_console(&atmel_console); - } - - return 0; -} - -console_initcall(atmel_console_init); - -/* - * Late console initialization. - */ -static int __init atmel_late_console_init(void) -{ - if (atmel_default_console_device - && !(atmel_console.flags & CON_ENABLED)) - register_console(&atmel_console); - - return 0; -} - -core_initcall(atmel_late_console_init); - static inline bool atmel_is_console_port(struct uart_port *port) { return port->cons && port->cons->index == port->line; @@ -2804,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *atmel_port; struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); void *data; int ret = -ENODEV; bool rs485_enabled; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - if (np) - ret = of_alias_get_id(np, "serial"); - else - if (pdata) - ret = pdata->num; - + ret = of_alias_get_id(np, "serial"); if (ret < 0) /* port id not found in platform data nor device-tree aliases: * auto-enumerate it */ diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 15df1ba78095..343de8c384b0 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -140,6 +140,8 @@ #define UARTBAUD_SBNS 0x00002000 #define UARTBAUD_SBR 0x00000000 #define UARTBAUD_SBR_MASK 0x1fff +#define UARTBAUD_OSR_MASK 0x1f +#define UARTBAUD_OSR_SHIFT 24 #define UARTSTAT_LBKDIF 0x80000000 #define UARTSTAT_RXEDGIF 0x40000000 @@ -231,12 +233,14 @@ #define DEV_NAME "ttyLP" #define UART_NR 6 +/* IMX lpuart has four extra unused regs located at the beginning */ +#define IMX_REG_OFF 0x10 + struct lpuart_port { struct uart_port port; struct clk *clk; unsigned int txfifo_size; unsigned int rxfifo_size; - bool lpuart32; bool lpuart_dma_tx_use; bool lpuart_dma_rx_use; @@ -258,13 +262,28 @@ struct lpuart_port { wait_queue_head_t dma_wait; }; +struct lpuart_soc_data { + char iotype; + u8 reg_off; +}; + +static const struct lpuart_soc_data vf_data = { + .iotype = UPIO_MEM, +}; + +static const struct lpuart_soc_data ls_data = { + .iotype = UPIO_MEM32BE, +}; + +static struct lpuart_soc_data imx_data = { + .iotype = UPIO_MEM32, + .reg_off = IMX_REG_OFF, +}; + static const struct of_device_id lpuart_dt_ids[] = { - { - .compatible = "fsl,vf610-lpuart", - }, - { - .compatible = "fsl,ls1021a-lpuart", - }, + { .compatible = "fsl,vf610-lpuart", .data = &vf_data, }, + { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, }, + { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -272,14 +291,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids); /* Forward declare this for the dma callbacks*/ static void lpuart_dma_tx_complete(void *arg); -static u32 lpuart32_read(void __iomem *addr) +static inline u32 lpuart32_read(struct uart_port *port, u32 off) { - return ioread32be(addr); + switch (port->iotype) { + case UPIO_MEM32: + return readl(port->membase + off); + case UPIO_MEM32BE: + return ioread32be(port->membase + off); + default: + return 0; + } } -static void lpuart32_write(u32 val, void __iomem *addr) +static inline void lpuart32_write(struct uart_port *port, u32 val, + u32 off) { - iowrite32be(val, addr); + switch (port->iotype) { + case UPIO_MEM32: + writel(val, port->membase + off); + break; + case UPIO_MEM32BE: + iowrite32be(val, port->membase + off); + break; + } } static void lpuart_stop_tx(struct uart_port *port) @@ -295,9 +329,9 @@ static void lpuart32_stop_tx(struct uart_port *port) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); } static void lpuart_stop_rx(struct uart_port *port) @@ -312,8 +346,8 @@ static void lpuart32_stop_rx(struct uart_port *port) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); - lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL); } static void lpuart_dma_tx(struct lpuart_port *sport) @@ -512,14 +546,14 @@ static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) struct circ_buf *xmit = &sport->port.state->xmit; unsigned long txcnt; - txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = lpuart32_read(&sport->port, UARTWATER); txcnt = txcnt >> UARTWATER_TXCNT_OFF; txcnt &= UARTWATER_COUNT_MASK; while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { - lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA); + lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); sport->port.icount.tx++; - txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = lpuart32_read(&sport->port, UARTWATER); txcnt = txcnt >> UARTWATER_TXCNT_OFF; txcnt &= UARTWATER_COUNT_MASK; } @@ -555,10 +589,10 @@ static void lpuart32_start_tx(struct uart_port *port) struct lpuart_port *sport = container_of(port, struct lpuart_port, port); unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL); - lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL); - if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE) + if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE) lpuart32_transmit_buffer(sport); } @@ -581,7 +615,7 @@ static unsigned int lpuart_tx_empty(struct uart_port *port) static unsigned int lpuart32_tx_empty(struct uart_port *port) { - return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ? + return (lpuart32_read(port, UARTSTAT) & UARTSTAT_TC) ? TIOCSER_TEMT : 0; } @@ -593,22 +627,22 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { - if (sport->lpuart32) - lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + lpuart32_write(&sport->port, sport->port.x_char, UARTDATA); else writeb(sport->port.x_char, sport->port.membase + UARTDR); goto out; } if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - if (sport->lpuart32) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_stop_tx(&sport->port); else lpuart_stop_tx(&sport->port); goto out; } - if (sport->lpuart32) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_transmit_buffer(sport); else lpuart_transmit_buffer(sport); @@ -694,15 +728,15 @@ static irqreturn_t lpuart32_rxint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); - while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) { + while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) { flg = TTY_NORMAL; sport->port.icount.rx++; /* * to clear the FE, OR, NF, FE, PE flags, * read STAT then read DATA reg */ - sr = lpuart32_read(sport->port.membase + UARTSTAT); - rx = lpuart32_read(sport->port.membase + UARTDATA); + sr = lpuart32_read(&sport->port, UARTSTAT); + rx = lpuart32_read(&sport->port, UARTDATA); rx &= 0x3ff; if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) @@ -769,18 +803,18 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id) struct lpuart_port *sport = dev_id; unsigned long sts, rxcount; - sts = lpuart32_read(sport->port.membase + UARTSTAT); - rxcount = lpuart32_read(sport->port.membase + UARTWATER); + sts = lpuart32_read(&sport->port, UARTSTAT); + rxcount = lpuart32_read(&sport->port, UARTWATER); rxcount = rxcount >> UARTWATER_RXCNT_OFF; if (sts & UARTSTAT_RDRF || rxcount > 0) lpuart32_rxint(irq, dev_id); if ((sts & UARTSTAT_TDRE) && - !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE)) + !(lpuart32_read(&sport->port, UARTBAUD) & UARTBAUD_TDMAE)) lpuart_txint(irq, dev_id); - lpuart32_write(sts, sport->port.membase + UARTSTAT); + lpuart32_write(&sport->port, sts, UARTSTAT); return IRQ_HANDLED; } @@ -1041,7 +1075,7 @@ static unsigned int lpuart32_get_mctrl(struct uart_port *port) unsigned int temp = 0; unsigned long reg; - reg = lpuart32_read(port->membase + UARTMODIR); + reg = lpuart32_read(port, UARTMODIR); if (reg & UARTMODIR_TXCTSE) temp |= TIOCM_CTS; @@ -1076,7 +1110,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTMODIR) & + temp = lpuart32_read(port, UARTMODIR) & ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); if (mctrl & TIOCM_RTS) @@ -1085,7 +1119,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_CTS) temp |= UARTMODIR_TXCTSE; - lpuart32_write(temp, port->membase + UARTMODIR); + lpuart32_write(port, temp, UARTMODIR); } static void lpuart_break_ctl(struct uart_port *port, int break_state) @@ -1104,12 +1138,12 @@ static void lpuart32_break_ctl(struct uart_port *port, int break_state) { unsigned long temp; - temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK; + temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK; if (break_state != 0) temp |= UARTCTRL_SBK; - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); } static void lpuart_setup_watermark(struct lpuart_port *sport) @@ -1149,24 +1183,24 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport) unsigned long val, ctrl; unsigned long ctrl_saved; - ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + ctrl = lpuart32_read(&sport->port, UARTCTRL); ctrl_saved = ctrl; ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | UARTCTRL_RIE | UARTCTRL_RE); - lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, ctrl, UARTCTRL); /* enable FIFO mode */ - val = lpuart32_read(sport->port.membase + UARTFIFO); + val = lpuart32_read(&sport->port, UARTFIFO); val |= UARTFIFO_TXFE | UARTFIFO_RXFE; val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; - lpuart32_write(val, sport->port.membase + UARTFIFO); + lpuart32_write(&sport->port, val, UARTFIFO); /* set the watermark */ val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); - lpuart32_write(val, sport->port.membase + UARTWATER); + lpuart32_write(&sport->port, val, UARTWATER); /* Restore cr2 */ - lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, ctrl_saved, UARTCTRL); } static void rx_dma_timer_init(struct lpuart_port *sport) @@ -1242,7 +1276,7 @@ static int lpuart32_startup(struct uart_port *port) unsigned long temp; /* determine FIFO size */ - temp = lpuart32_read(sport->port.membase + UARTFIFO); + temp = lpuart32_read(&sport->port, UARTFIFO); sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) & UARTFIFO_FIFOSIZE_MASK) - 1); @@ -1259,10 +1293,10 @@ static int lpuart32_startup(struct uart_port *port) lpuart32_setup_watermark(sport); - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE); temp |= UARTCTRL_ILIE; - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); spin_unlock_irqrestore(&sport->port.lock, flags); return 0; @@ -1311,10 +1345,10 @@ static void lpuart32_shutdown(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); /* disable Rx/Tx and interrupts */ - temp = lpuart32_read(port->membase + UARTCTRL); + temp = lpuart32_read(port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); - lpuart32_write(temp, port->membase + UARTCTRL); + lpuart32_write(port, temp, UARTCTRL); spin_unlock_irqrestore(&port->lock, flags); @@ -1479,6 +1513,75 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios, } static void +lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate) +{ + u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp; + u32 clk = sport->port.uartclk; + + /* + * The idea is to use the best OSR (over-sampling rate) possible. + * Note, OSR is typically hard-set to 16 in other LPUART instantiations. + * Loop to find the best OSR value possible, one that generates minimum + * baud_diff iterate through the rest of the supported values of OSR. + * + * Calculation Formula: + * Baud Rate = baud clock / ((OSR+1) × SBR) + */ + baud_diff = baudrate; + osr = 0; + sbr = 0; + + for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) { + /* calculate the temporary sbr value */ + tmp_sbr = (clk / (baudrate * tmp_osr)); + if (tmp_sbr == 0) + tmp_sbr = 1; + + /* + * calculate the baud rate difference based on the temporary + * osr and sbr values + */ + tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate; + + /* select best values between sbr and sbr+1 */ + tmp = clk / (tmp_osr * (tmp_sbr + 1)); + if (tmp_diff > (baudrate - tmp)) { + tmp_diff = baudrate - tmp; + tmp_sbr++; + } + + if (tmp_diff <= baud_diff) { + baud_diff = tmp_diff; + osr = tmp_osr; + sbr = tmp_sbr; + + if (!baud_diff) + break; + } + } + + /* handle buadrate outside acceptable rate */ + if (baud_diff > ((baudrate / 100) * 3)) + dev_warn(sport->port.dev, + "unacceptable baud rate difference of more than 3%%\n"); + + tmp = lpuart32_read(&sport->port, UARTBAUD); + + if ((osr > 3) && (osr < 8)) + tmp |= UARTBAUD_BOTHEDGE; + + tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT); + tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT); + + tmp &= ~UARTBAUD_SBR_MASK; + tmp |= sbr & UARTBAUD_SBR_MASK; + + tmp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); + + lpuart32_write(&sport->port, tmp, UARTBAUD); +} + +static void lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { @@ -1487,11 +1590,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long ctrl, old_ctrl, bd, modem; unsigned int baud; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int sbr; - ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL); - bd = lpuart32_read(sport->port.membase + UARTBAUD); - modem = lpuart32_read(sport->port.membase + UARTMODIR); + ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); + bd = lpuart32_read(&sport->port, UARTBAUD); + modem = lpuart32_read(&sport->port, UARTMODIR); /* * only support CS8 and CS7, and for CS7 must enable PE. * supported mode: @@ -1577,21 +1679,16 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); /* wait transmit engin complete */ - while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC)) barrier(); /* disable transmit and receive */ - lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), - sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), + UARTCTRL); - sbr = sport->port.uartclk / (16 * baud); - bd &= ~UARTBAUD_SBR_MASK; - bd |= sbr & UARTBAUD_SBR_MASK; - bd |= UARTBAUD_BOTHEDGE; - bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); - lpuart32_write(bd, sport->port.membase + UARTBAUD); - lpuart32_write(modem, sport->port.membase + UARTMODIR); - lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + lpuart32_serial_setbrg(sport, baud); + lpuart32_write(&sport->port, modem, UARTMODIR); + lpuart32_write(&sport->port, ctrl, UARTCTRL); /* restore control register */ spin_unlock_irqrestore(&sport->port.lock, flags); @@ -1694,10 +1791,10 @@ static void lpuart_console_putchar(struct uart_port *port, int ch) static void lpuart32_console_putchar(struct uart_port *port, int ch) { - while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + while (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)) barrier(); - lpuart32_write(ch, port->membase + UARTDATA); + lpuart32_write(port, ch, UARTDATA); } static void @@ -1745,18 +1842,18 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count) spin_lock_irqsave(&sport->port.lock, flags); /* first save CR2 and then disable interrupts */ - cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = old_cr = lpuart32_read(&sport->port, UARTCTRL); cr |= (UARTCTRL_TE | UARTCTRL_RE); cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); - lpuart32_write(cr, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, cr, UARTCTRL); uart_console_write(&sport->port, s, count, lpuart32_console_putchar); /* wait for transmitter finish complete and restore CR2 */ - while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC)) barrier(); - lpuart32_write(old_cr, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, old_cr, UARTCTRL); if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); @@ -1822,14 +1919,14 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud, unsigned long cr, bd; unsigned int sbr, uartclk, baud_raw; - cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = lpuart32_read(&sport->port, UARTCTRL); cr &= UARTCTRL_TE | UARTCTRL_RE; if (!cr) return; /* ok, the port was enabled */ - cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr = lpuart32_read(&sport->port, UARTCTRL); *parity = 'n'; if (cr & UARTCTRL_PE) { @@ -1844,7 +1941,7 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud, else *bits = 8; - bd = lpuart32_read(sport->port.membase + UARTBAUD); + bd = lpuart32_read(&sport->port, UARTBAUD); bd &= UARTBAUD_SBR_MASK; sbr = bd; uartclk = clk_get_rate(sport->clk); @@ -1881,12 +1978,12 @@ static int __init lpuart_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - if (sport->lpuart32) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_console_get_options(sport, &baud, &parity, &bits); else lpuart_console_get_options(sport, &baud, &parity, &bits); - if (sport->lpuart32) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart32_setup_watermark(sport); else lpuart_setup_watermark(sport); @@ -1945,12 +2042,26 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device, if (!device->port.membase) return -ENODEV; + device->port.iotype = UPIO_MEM32BE; device->con->write = lpuart32_early_write; return 0; } +static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->port.membase += IMX_REG_OFF; + device->con->write = lpuart32_early_write; + + return 0; +} OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); @@ -1971,6 +2082,9 @@ static struct uart_driver lpuart_reg = { static int lpuart_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = of_match_device(lpuart_dt_ids, + &pdev->dev); + const struct lpuart_soc_data *sdata = of_id->data; struct device_node *np = pdev->dev.of_node; struct lpuart_port *sport; struct resource *res; @@ -1988,25 +2102,23 @@ static int lpuart_probe(struct platform_device *pdev) return ret; } sport->port.line = ret; - sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sport->port.membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(sport->port.membase)) return PTR_ERR(sport->port.membase); + sport->port.membase += sdata->reg_off; sport->port.mapbase = res->start; sport->port.dev = &pdev->dev; sport->port.type = PORT_LPUART; - sport->port.iotype = UPIO_MEM; ret = platform_get_irq(pdev, 0); if (ret < 0) { dev_err(&pdev->dev, "cannot obtain irq\n"); return ret; } sport->port.irq = ret; - - if (sport->lpuart32) + sport->port.iotype = sdata->iotype; + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) sport->port.ops = &lpuart32_pops; else sport->port.ops = &lpuart_pops; @@ -2033,7 +2145,7 @@ static int lpuart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); - if (sport->lpuart32) + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) lpuart_reg.cons = LPUART32_CONSOLE; else lpuart_reg.cons = LPUART_CONSOLE; @@ -2086,11 +2198,11 @@ static int lpuart_suspend(struct device *dev) struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; - if (sport->lpuart32) { + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { /* disable Rx/Tx and interrupts */ - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); } else { /* disable Rx/Tx and interrupts */ temp = readb(sport->port.membase + UARTCR2); @@ -2137,12 +2249,12 @@ static int lpuart_resume(struct device *dev) if (sport->port.suspended && !sport->port.irq_wake) clk_prepare_enable(sport->clk); - if (sport->lpuart32) { + if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { lpuart32_setup_watermark(sport); - temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE); - lpuart32_write(temp, sport->port.membase + UARTCTRL); + lpuart32_write(&sport->port, temp, UARTCTRL); } else { lpuart_setup_watermark(sport); temp = readb(sport->port.membase + UARTCR2); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index bbefddd92bfe..9e3162bf3bd1 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -186,6 +186,11 @@ #define UART_NR 8 +/* RX DMA buffer periods */ +#define RX_DMA_PERIODS 4 +#define RX_BUF_SIZE (PAGE_SIZE) + + /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */ enum imx_uart_type { IMX1_UART, @@ -207,9 +212,6 @@ struct imx_port { unsigned int have_rtscts:1; unsigned int have_rtsgpio:1; unsigned int dte_mode:1; - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short trcv_delay; /* transceiver delay */ struct clk *clk_ipg; struct clk *clk_per; const struct imx_uart_data *devdata; @@ -224,6 +226,7 @@ struct imx_port { struct dma_chan *dma_chan_rx, *dma_chan_tx; struct scatterlist rx_sgl, tx_sgl[2]; void *rx_buf; + unsigned int rx_buf_size; struct circ_buf rx_ring; unsigned int rx_periods; dma_cookie_t rx_cookie; @@ -964,8 +967,6 @@ static void imx_timeout(unsigned long data) } } -#define RX_BUF_SIZE (PAGE_SIZE) - /* * There are two kinds of RX DMA interrupts(such as in the MX6Q): * [1] the RX DMA buffer is full. @@ -1048,9 +1049,6 @@ static void dma_rx_callback(void *data) } } -/* RX DMA buffer periods */ -#define RX_DMA_PERIODS 4 - static int start_rx_dma(struct imx_port *sport) { struct scatterlist *sgl = &sport->rx_sgl; @@ -1061,9 +1059,8 @@ static int start_rx_dma(struct imx_port *sport) sport->rx_ring.head = 0; sport->rx_ring.tail = 0; - sport->rx_periods = RX_DMA_PERIODS; - sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); + sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size); ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); if (ret == 0) { dev_err(dev, "DMA mapping error for RX.\n"); @@ -1174,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport) goto err; } - sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); + sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL); if (!sport->rx_buf) { ret = -ENOMEM; goto err; @@ -1302,7 +1299,9 @@ static int imx_startup(struct uart_port *port) imx_enable_dma(sport); temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + temp |= UCR1_RRDYEN | UCR1_UARTEN; + if (sport->have_rtscts) + temp |= UCR1_RTSDEN; writel(temp, sport->port.membase + UCR1); @@ -1340,29 +1339,13 @@ static int imx_startup(struct uart_port *port) imx_enable_ms(&sport->port); /* - * If the serial port is opened for reading start RX DMA immediately - * instead of waiting for RX FIFO interrupts. In our iMX53 the average - * delay for the first reception dropped from approximately 35000 - * microseconds to 1000 microseconds. + * Start RX DMA immediately instead of waiting for RX FIFO interrupts. + * In our iMX53 the average delay for the first reception dropped from + * approximately 35000 microseconds to 1000 microseconds. */ if (sport->dma_is_enabled) { - struct tty_struct *tty = sport->port.state->port.tty; - struct tty_file_private *file_priv; - int readcnt = 0; - - spin_lock(&tty->files_lock); - - if (!list_empty(&tty->tty_files)) - list_for_each_entry(file_priv, &tty->tty_files, list) - if (!(file_priv->file->f_flags & O_WRONLY)) - readcnt++; - - spin_unlock(&tty->files_lock); - - if (readcnt > 0) { - imx_disable_rx_int(sport); - start_rx_dma(sport); - } + imx_disable_rx_int(sport); + start_rx_dma(sport); } spin_unlock_irqrestore(&sport->port.lock, flags); @@ -2053,6 +2036,7 @@ static int serial_imx_probe_dt(struct imx_port *sport, { struct device_node *np = pdev->dev.of_node; int ret; + u32 dma_buf_size[2]; sport->devdata = of_device_get_match_data(&pdev->dev); if (!sport->devdata) @@ -2076,6 +2060,14 @@ static int serial_imx_probe_dt(struct imx_port *sport, if (of_get_property(np, "rts-gpios", NULL)) sport->have_rtsgpio = 1; + if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) { + sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1]; + sport->rx_periods = dma_buf_size[1]; + } else { + sport->rx_buf_size = RX_BUF_SIZE; + sport->rx_periods = RX_DMA_PERIODS; + } + return 0; } #else diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 60f16795d16b..42e4a4c7597f 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -286,7 +286,7 @@ static int meson_uart_startup(struct uart_port *port) writel(val, port->membase + AML_UART_MISC); ret = request_irq(port->irq, meson_uart_interrupt, 0, - meson_uart_type(port), port); + port->name, port); return ret; } @@ -298,8 +298,6 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) while (!meson_uart_tx_empty(port)) cpu_relax(); - val = readl(port->membase + AML_UART_REG5); - val &= ~AML_UART_BAUD_MASK; if (port->uartclk == 24000000) { val = ((port->uartclk / 3) / baud) - 1; val |= AML_UART_BAUD_XTAL; @@ -355,7 +353,7 @@ static void meson_uart_set_termios(struct uart_port *port, if (cflags & CSTOPB) val |= AML_UART_STOP_BIN_2SB; else - val &= ~AML_UART_STOP_BIN_1SB; + val |= AML_UART_STOP_BIN_1SB; if (cflags & CRTSCTS) val &= ~AML_UART_TWO_WIRE_EN; @@ -395,51 +393,25 @@ static int meson_uart_verify_port(struct uart_port *port, return ret; } -static int meson_uart_res_size(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(port->dev, "cannot obtain I/O memory region"); - return -ENODEV; - } - - return resource_size(res); -} - static void meson_uart_release_port(struct uart_port *port) { - int size = meson_uart_res_size(port); - - if (port->flags & UPF_IOREMAP) { - devm_release_mem_region(port->dev, port->mapbase, size); - devm_iounmap(port->dev, port->membase); - port->membase = NULL; - } + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + devm_release_mem_region(port->dev, port->mapbase, port->mapsize); } static int meson_uart_request_port(struct uart_port *port) { - int size = meson_uart_res_size(port); - - if (size < 0) - return size; - - if (!devm_request_mem_region(port->dev, port->mapbase, size, + if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize, dev_name(port->dev))) { dev_err(port->dev, "Memory region busy\n"); return -EBUSY; } - if (port->flags & UPF_IOREMAP) { - port->membase = devm_ioremap_nocache(port->dev, - port->mapbase, - size); - if (port->membase == NULL) - return -ENOMEM; - } + port->membase = devm_ioremap_nocache(port->dev, port->mapbase, + port->mapsize); + if (!port->membase) + return -ENOMEM; return 0; } @@ -470,6 +442,14 @@ static struct uart_ops meson_uart_ops = { }; #ifdef CONFIG_SERIAL_MESON_CONSOLE +static void meson_uart_enable_tx_engine(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} static void meson_console_putchar(struct uart_port *port, int ch) { @@ -499,7 +479,6 @@ static void meson_serial_port_write(struct uart_port *port, const char *s, } val = readl(port->membase + AML_UART_CONTROL); - val |= AML_UART_TX_EN; tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN); writel(tmp, port->membase + AML_UART_CONTROL); @@ -538,6 +517,8 @@ static int meson_serial_console_setup(struct console *co, char *options) if (!port || !port->membase) return -ENODEV; + meson_uart_enable_tx_engine(port); + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -576,11 +557,16 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt if (!device->port.membase) return -ENODEV; + meson_uart_enable_tx_engine(&device->port); device->con->write = meson_serial_early_console_write; return 0; } +/* Legacy bindings, should be removed when no more used */ OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart", meson_serial_early_console_setup); +/* Stable bindings */ +OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", + meson_serial_early_console_setup); #define MESON_SERIAL_CONSOLE (&meson_serial_console) #else @@ -595,11 +581,76 @@ static struct uart_driver meson_uart_driver = { .cons = MESON_SERIAL_CONSOLE, }; +static inline struct clk *meson_uart_probe_clock(struct device *dev, + const char *id) +{ + struct clk *clk = NULL; + int ret; + + clk = devm_clk_get(dev, id); + if (IS_ERR(clk)) + return clk; + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "couldn't enable clk\n"); + return ERR_PTR(ret); + } + + devm_add_action_or_reset(dev, + (void(*)(void *))clk_disable_unprepare, + clk); + + return clk; +} + +/* + * This function gets clocks in the legacy non-stable DT bindings. + * This code will be remove once all the platforms switch to the + * new DT bindings. + */ +static int meson_uart_probe_clocks_legacy(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk = NULL; + + clk = meson_uart_probe_clock(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + port->uartclk = clk_get_rate(clk); + + return 0; +} + +static int meson_uart_probe_clocks(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk_xtal = NULL; + struct clk *clk_pclk = NULL; + struct clk *clk_baud = NULL; + + clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk"); + if (IS_ERR(clk_pclk)) + return PTR_ERR(clk_pclk); + + clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal"); + if (IS_ERR(clk_xtal)) + return PTR_ERR(clk_xtal); + + clk_baud = meson_uart_probe_clock(&pdev->dev, "baud"); + if (IS_ERR(clk_baud)) + return PTR_ERR(clk_baud); + + port->uartclk = clk_get_rate(clk_baud); + + return 0; +} + static int meson_uart_probe(struct platform_device *pdev) { struct resource *res_mem, *res_irq; struct uart_port *port; - struct clk *clk; int ret = 0; if (pdev->dev.of_node) @@ -625,15 +676,20 @@ static int meson_uart_probe(struct platform_device *pdev) if (!port) return -ENOMEM; - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) - return PTR_ERR(clk); + /* Use legacy way until all platforms switch to new bindings */ + if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart")) + ret = meson_uart_probe_clocks_legacy(pdev, port); + else + ret = meson_uart_probe_clocks(pdev, port); + + if (ret) + return ret; - port->uartclk = clk_get_rate(clk); port->iotype = UPIO_MEM; port->mapbase = res_mem->start; + port->mapsize = resource_size(res_mem); port->irq = res_irq->start; - port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY; port->dev = &pdev->dev; port->line = pdev->id; port->type = PORT_MESON; @@ -668,9 +724,14 @@ static int meson_uart_remove(struct platform_device *pdev) return 0; } - static const struct of_device_id meson_uart_dt_match[] = { + /* Legacy bindings, should be removed when no more used */ { .compatible = "amlogic,meson-uart" }, + /* Stable bindings */ + { .compatible = "amlogic,meson6-uart" }, + { .compatible = "amlogic,meson8-uart" }, + { .compatible = "amlogic,meson8b-uart" }, + { .compatible = "amlogic,meson-gx-uart" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, meson_uart_dt_match); diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 1a60a2063e75..67ffecc50e42 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -754,9 +754,10 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) if (!dma_set_mask(pi->port.dev, 0xffffffff)) { printk(KERN_ERR "MPSC: Inadequate DMA support\n"); rc = -ENXIO; - } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + } else if ((pi->dma_region = dma_alloc_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - &pi->dma_region_p, GFP_KERNEL)) + &pi->dma_region_p, GFP_KERNEL, + DMA_ATTR_NON_CONSISTENT)) == NULL) { printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); rc = -ENOMEM; @@ -771,8 +772,9 @@ static void mpsc_free_ring_mem(struct mpsc_port_info *pi) pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); if (pi->dma_region) { - dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - pi->dma_region, pi->dma_region_p); + dma_free_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p, + DMA_ATTR_NON_CONSISTENT); pi->dma_region = NULL; pi->dma_region_p = (dma_addr_t)NULL; } diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c new file mode 100644 index 000000000000..1b8008797a1b --- /dev/null +++ b/drivers/tty/serial/owl-uart.c @@ -0,0 +1,135 @@ +/* + * Actions Semi Owl family serial console + * + * Copyright 2013 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2016-2017 Andreas Färber + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#define OWL_UART_CTL 0x000 +#define OWL_UART_TXDAT 0x008 +#define OWL_UART_STAT 0x00c + +#define OWL_UART_CTL_TRFS_TX BIT(14) +#define OWL_UART_CTL_EN BIT(15) +#define OWL_UART_CTL_RXIE BIT(18) +#define OWL_UART_CTL_TXIE BIT(19) + +#define OWL_UART_STAT_RIP BIT(0) +#define OWL_UART_STAT_TIP BIT(1) +#define OWL_UART_STAT_TFFU BIT(6) +#define OWL_UART_STAT_TRFL_MASK (0x1f << 11) +#define OWL_UART_STAT_UTBB BIT(17) + +static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline u32 owl_uart_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +#ifdef CONFIG_SERIAL_OWL_CONSOLE + +static void owl_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU) + cpu_relax(); + + owl_uart_write(port, ch, OWL_UART_TXDAT); +} + +static void owl_uart_port_write(struct uart_port *port, const char *s, + u_int count) +{ + u32 old_ctl, val; + unsigned long flags; + int locked; + + local_irq_save(flags); + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else { + spin_lock(&port->lock); + locked = 1; + } + + old_ctl = owl_uart_read(port, OWL_UART_CTL); + val = old_ctl | OWL_UART_CTL_TRFS_TX; + /* disable IRQ */ + val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE); + owl_uart_write(port, val, OWL_UART_CTL); + + uart_console_write(port, s, count, owl_console_putchar); + + /* wait until all contents have been sent out */ + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TRFL_MASK) + cpu_relax(); + + /* clear IRQ pending */ + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP | OWL_UART_STAT_RIP; + owl_uart_write(port, val, OWL_UART_STAT); + + owl_uart_write(port, old_ctl, OWL_UART_CTL); + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void owl_uart_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + owl_uart_port_write(&dev->port, s, count); +} + +static int __init +owl_uart_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = owl_uart_early_console_write; + + return 0; +} +OF_EARLYCON_DECLARE(owl, "actions,owl-uart", + owl_uart_early_console_setup); + +#endif /* CONFIG_SERIAL_OWL_CONSOLE */ diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 42caccb5e87e..d3796dc26fa9 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -878,8 +878,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_len(sg) = priv->trigger_level; sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), - sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & - ~PAGE_MASK); + sg_dma_len(sg), offset_in_page(priv->rx_buf_virt)); sg_dma_address(sg) = priv->rx_buf_dma; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index fcf803ffad19..cdd2f942317c 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev) clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { - if (PTR_ERR(clk) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + ret = PTR_ERR(clk); + if (ret == -EPROBE_DEFER) goto err_out; - } + uartclk = 0; + } else { + clk_prepare_enable(clk); + uartclk = clk_get_rate(clk); + } + + if (!uartclk) { dev_notice(&pdev->dev, "Using default clock frequency\n"); uartclk = s->chip->freq_std; - } else - uartclk = clk_get_rate(clk); + } /* Check input frequency */ if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 13bfd5dcffce..f534a40aebde 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -954,11 +954,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, old_custom_divisor != uport->custom_divisor) { /* * If they're setting up a custom divisor or speed, - * instead of clearing it, then bitch about it. No - * need to rate-limit; it's CAP_SYS_ADMIN only. + * instead of clearing it, then bitch about it. */ if (uport->flags & UPF_SPD_MASK) { - dev_notice(uport->dev, + dev_notice_ratelimited(uport->dev, "%s sets custom speed on %s. This is deprecated.\n", current->comm, tty_name(port->tty)); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 71707e8e6e3f..da5ddfc14778 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1450,8 +1450,7 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port, chan = dma_request_slave_channel(port->dev, dir == DMA_MEM_TO_DEV ? "tx" : "rx"); if (!chan) { - dev_warn(port->dev, - "dma_request_slave_channel_compat failed\n"); + dev_warn(port->dev, "dma_request_slave_channel failed\n"); return NULL; } @@ -1558,7 +1557,16 @@ static void sci_free_dma(struct uart_port *port) if (s->chan_rx) sci_rx_dma_release(s, false); } -#else + +static void sci_flush_buffer(struct uart_port *port) +{ + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly. + */ + to_sci_port(port)->tx_dma_len = 0; +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) { } @@ -1566,7 +1574,9 @@ static inline void sci_request_dma(struct uart_port *port) static inline void sci_free_dma(struct uart_port *port) { } -#endif + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { @@ -2581,6 +2591,7 @@ static const struct uart_ops sci_uart_ops = { .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, .set_termios = sci_set_termios, .pm = sci_pm, .type = sci_type, @@ -2950,6 +2961,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev) static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized"; +static DEFINE_MUTEX(sci_uart_registration_lock); static struct uart_driver sci_uart_driver = { .owner = THIS_MODULE, .driver_name = "sci", @@ -3078,6 +3090,16 @@ static int sci_probe_single(struct platform_device *dev, return -EINVAL; } + mutex_lock(&sci_uart_registration_lock); + if (!sci_uart_driver.state) { + ret = uart_register_driver(&sci_uart_driver); + if (ret) { + mutex_unlock(&sci_uart_registration_lock); + return ret; + } + } + mutex_unlock(&sci_uart_registration_lock); + ret = sci_init_single(dev, sciport, index, p, false); if (ret) return ret; @@ -3201,24 +3223,17 @@ static struct platform_driver sci_driver = { static int __init sci_init(void) { - int ret; - pr_info("%s\n", banner); - ret = uart_register_driver(&sci_uart_driver); - if (likely(ret == 0)) { - ret = platform_driver_register(&sci_driver); - if (unlikely(ret)) - uart_unregister_driver(&sci_uart_driver); - } - - return ret; + return platform_driver_register(&sci_driver); } static void __exit sci_exit(void) { platform_driver_unregister(&sci_driver); - uart_unregister_driver(&sci_uart_driver); + + if (sci_uart_driver.state) + uart_unregister_driver(&sci_uart_driver); } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index e03282d92b59..684cb8dd8050 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -1253,7 +1253,7 @@ next_hrt: return HRTIMER_RESTART; } -static struct of_device_id sirfsoc_uart_ids[] = { +static const struct of_device_id sirfsoc_uart_ids[] = { { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index c0539950f8d7..fde55dcdea5a 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -186,6 +186,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * @pclk: APB clock * @baud: Current baud rate * @clk_rate_change_nb: Notifier block for clock changes + * @quirks: Flags for RXBS support. */ struct cdns_uart { struct uart_port *port; @@ -1587,20 +1588,21 @@ static int cdns_uart_probe(struct platform_device *pdev) if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); - goto err_out_notif_unreg; + goto err_out_pm_disable; } return 0; +err_out_pm_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); err_out_notif_unreg: #ifdef CONFIG_COMMON_CLK clk_notifier_unregister(cdns_uart_data->uartclk, &cdns_uart_data->clk_rate_change_nb); #endif err_out_clk_disable: - pm_runtime_disable(&pdev->dev); - pm_runtime_set_suspended(&pdev->dev); - pm_runtime_dont_use_autosuspend(&pdev->dev); clk_disable_unprepare(cdns_uart_data->uartclk); err_out_clk_dis_pclk: clk_disable_unprepare(cdns_uart_data->pclk); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index f6ffe28b8a0d..2fe216b276e2 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -492,6 +492,29 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) } /** + * tty_ldisc_failto - helper for ldisc failback + * @tty: tty to open the ldisc on + * @ld: ldisc we are trying to fail back to + * + * Helper to try and recover a tty when switching back to the old + * ldisc fails and we need something attached. + */ + +static int tty_ldisc_failto(struct tty_struct *tty, int ld) +{ + struct tty_ldisc *disc = tty_ldisc_get(tty, ld); + int r; + + if (IS_ERR(disc)) + return PTR_ERR(disc); + tty->ldisc = disc; + tty_set_termios_ldisc(tty, ld); + if ((r = tty_ldisc_open(tty, disc)) < 0) + tty_ldisc_put(disc); + return r; +} + +/** * tty_ldisc_restore - helper for tty ldisc change * @tty: tty to recover * @old: previous ldisc @@ -502,9 +525,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { - struct tty_ldisc *new_ldisc; - int r; - /* There is an outstanding reference here so this is safe */ old = tty_ldisc_get(tty, old->ops->num); WARN_ON(IS_ERR(old)); @@ -512,17 +532,13 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) tty_set_termios_ldisc(tty, old->ops->num); if (tty_ldisc_open(tty, old) < 0) { tty_ldisc_put(old); - /* This driver is always present */ - new_ldisc = tty_ldisc_get(tty, N_TTY); - if (IS_ERR(new_ldisc)) - panic("n_tty: get"); - tty->ldisc = new_ldisc; - tty_set_termios_ldisc(tty, N_TTY); - r = tty_ldisc_open(tty, new_ldisc); - if (r < 0) - panic("Couldn't open N_TTY ldisc for " - "%s --- error %d.", - tty_name(tty), r); + /* The traditional behaviour is to fall back to N_TTY, we + want to avoid falling back to N_NULL unless we have no + choice to avoid the risk of breaking anything */ + if (tty_ldisc_failto(tty, N_TTY) < 0 && + tty_ldisc_failto(tty, N_NULL) < 0) + panic("Couldn't open N_NULL ldisc for %s.", + tty_name(tty)); } } diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 1f6e17fc3fb0..a5f88cf0f61d 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -322,15 +322,13 @@ int con_set_trans_old(unsigned char __user * arg) { int i; unsigned short inbuf[E_TABSZ]; + unsigned char ubuf[E_TABSZ]; - if (!access_ok(VERIFY_READ, arg, E_TABSZ)) + if (copy_from_user(ubuf, arg, E_TABSZ)) return -EFAULT; - for (i = 0; i < E_TABSZ ; i++) { - unsigned char uc; - __get_user(uc, arg+i); - inbuf[i] = UNI_DIRECT_BASE | uc; - } + for (i = 0; i < E_TABSZ ; i++) + inbuf[i] = UNI_DIRECT_BASE | ubuf[i]; console_lock(); memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); @@ -345,9 +343,6 @@ int con_get_trans_old(unsigned char __user * arg) unsigned short *p = translations[USER_MAP]; unsigned char outbuf[E_TABSZ]; - if (!access_ok(VERIFY_WRITE, arg, E_TABSZ)) - return -EFAULT; - console_lock(); for (i = 0; i < E_TABSZ ; i++) { @@ -356,22 +351,16 @@ int con_get_trans_old(unsigned char __user * arg) } console_unlock(); - for (i = 0; i < E_TABSZ ; i++) - __put_user(outbuf[i], arg+i); - return 0; + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; } int con_set_trans_new(ushort __user * arg) { - int i; unsigned short inbuf[E_TABSZ]; - if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short))) + if (copy_from_user(inbuf, arg, sizeof(inbuf))) return -EFAULT; - for (i = 0; i < E_TABSZ ; i++) - __get_user(inbuf[i], arg+i); - console_lock(); memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); update_user_maps(); @@ -381,19 +370,13 @@ int con_set_trans_new(ushort __user * arg) int con_get_trans_new(ushort __user * arg) { - int i; unsigned short outbuf[E_TABSZ]; - if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short))) - return -EFAULT; - console_lock(); memcpy(outbuf, translations[USER_MAP], sizeof(outbuf)); console_unlock(); - for (i = 0; i < E_TABSZ ; i++) - __put_user(outbuf[i], arg+i); - return 0; + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; } /* @@ -557,14 +540,9 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) if (!ct) return 0; - unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL); - if (!unilist) - return -ENOMEM; - - for (i = ct, plist = unilist; i; i--, plist++, list++) { - __get_user(plist->unicode, &list->unicode); - __get_user(plist->fontpos, &list->fontpos); - } + unilist = memdup_user(list, ct * sizeof(struct unipair)); + if (IS_ERR(unilist)) + return PTR_ERR(unilist); console_lock(); @@ -757,11 +735,11 @@ EXPORT_SYMBOL(con_copy_unimap); */ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list) { - int i, j, k; + int i, j, k, ret = 0; ushort ect; u16 **p1, *p2; struct uni_pagedir *p; - struct unipair *unilist, *plist; + struct unipair *unilist; unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL); if (!unilist) @@ -792,13 +770,11 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni } } console_unlock(); - for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) { - __put_user(plist->unicode, &list->unicode); - __put_user(plist->fontpos, &list->fontpos); - } - __put_user(ect, uct); + if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair))) + ret = -EFAULT; + put_user(ect, uct); kfree(unilist); - return ((ect <= ct) ? 0 : -ENOMEM); + return ret ? ret : (ect <= ct) ? 0 : -ENOMEM; } /* diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 8af8d9542663..f4166263bb3a 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1203,8 +1203,7 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0); #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ - (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\ - defined(CONFIG_AVR32) + (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001)) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 9c9945284bcf..2ebaba16f785 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -425,7 +425,7 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, else if (_underline) a = (a & 0xf0) | vc->vc_ulcolor; else if (_intensity == 0) - a = (a & 0xf0) | vc->vc_ulcolor; + a = (a & 0xf0) | vc->vc_halfcolor; if (_reverse) a = ((a) & 0x88) | ((((a) >> 4) | ((a) << 4)) & 0x77); if (_blink) @@ -2709,13 +2709,13 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) * related to the kernel should not use this. */ data = vt_get_shift_state(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_GETMOUSEREPORTING: console_lock(); /* May be overkill */ data = mouse_reporting(); console_unlock(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_SETVESABLANK: console_lock(); @@ -2724,7 +2724,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) break; case TIOCL_GETKMSGREDIRECT: data = vt_get_kmsg_redirect(); - ret = __put_user(data, p); + ret = put_user(data, p); break; case TIOCL_SETKMSGREDIRECT: if (!capable(CAP_SYS_ADMIN)) { diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 0cbfe1ff6f6c..96d389cb506c 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -266,10 +266,6 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ if (copy_from_user(&tmp, user_ud, sizeof tmp)) return -EFAULT; - if (tmp.entries) - if (!access_ok(VERIFY_WRITE, tmp.entries, - tmp.entry_ct*sizeof(struct unipair))) - return -EFAULT; switch (cmd) { case PIO_UNIMAP: if (!perm) @@ -1170,10 +1166,6 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud, if (copy_from_user(&tmp, user_ud, sizeof tmp)) return -EFAULT; tmp_entries = compat_ptr(tmp.entries); - if (tmp_entries) - if (!access_ok(VERIFY_WRITE, tmp_entries, - tmp.entry_ct*sizeof(struct unipair))) - return -EFAULT; switch (cmd) { case PIO_UNIMAP: if (!perm) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aba74f817dc6..1cec03799cdf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1244,42 +1244,13 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, int div_okay = 1; int baud; - /* - * The logic involved in setting the baudrate can be cleanly split into - * 3 steps. - * 1. Standard baud rates are set in tty->termios->c_cflag - * 2. If these are not enough, you can set any speed using alt_speed as - * follows: - * - set tty->termios->c_cflag speed to B38400 - * - set your real speed in tty->alt_speed; it gets ignored when - * alt_speed==0, (or) - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], - * this just sets alt_speed to (HI: 57600, VHI: 115200, - * SHI: 230400, WARP: 460800) - * ** Steps 1, 2 are done courtesy of tty_get_baud_rate - * 3. You can also set baud rate by setting custom divisor as follows - * - set tty->termios->c_cflag speed to B38400 - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as - * follows: - * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST - * o custom_divisor set to baud_base / your_new_baudrate - * ** Step 3 is done courtesy of code borrowed from serial.c - * I should really spend some time and separate + move this common - * code to serial.c, it is replicated in nearly every serial driver - * you see. - */ - - /* 1. Get the baud rate from the tty settings, this observes - alt_speed hack */ - baud = tty_get_baud_rate(tty); dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); - /* 2. Observe async-compatible custom_divisor hack, update baudrate - if needed */ - + /* + * Observe deprecated async-compatible custom_divisor hack, update + * baudrate if needed. + */ if (baud == 38400 && ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { @@ -1288,8 +1259,6 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, __func__, priv->custom_divisor, baud); } - /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; switch (priv->chip_type) { @@ -1505,8 +1474,7 @@ static int set_serial_info(struct tty_struct *tty, /* Do error checking and permission checking */ if (!capable(CAP_SYS_ADMIN)) { - if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) { + if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) { mutex_unlock(&priv->cfg_lock); return -EPERM; } @@ -1530,23 +1498,14 @@ static int set_serial_info(struct tty_struct *tty, check_and_exit: write_latency_timer(port); - if ((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) { - if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - tty->alt_speed = 57600; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - tty->alt_speed = 115200; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - tty->alt_speed = 230400; - else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - tty->alt_speed = 460800; - else - tty->alt_speed = 0; - } - if (((old_priv.flags & ASYNC_SPD_MASK) != - (priv->flags & ASYNC_SPD_MASK)) || - (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && - (old_priv.custom_divisor != priv->custom_divisor))) { + if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || + ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + priv->custom_divisor != old_priv.custom_divisor)) { + + /* warn about deprecation unless clearing */ + if (priv->flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n"); + change_speed(tty, port); mutex_unlock(&priv->cfg_lock); } diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 6116d5275a3e..112b3e1e20e3 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -866,8 +866,6 @@ COMPATIBLE_IOCTL(TIOCGDEV) COMPATIBLE_IOCTL(TIOCCBRK) COMPATIBLE_IOCTL(TIOCGSID) COMPATIBLE_IOCTL(TIOCGICOUNT) -COMPATIBLE_IOCTL(TIOCGPKT) -COMPATIBLE_IOCTL(TIOCGPTLCK) COMPATIBLE_IOCTL(TIOCGEXCL) /* Little t */ COMPATIBLE_IOCTL(TIOCGETD) @@ -883,16 +881,12 @@ COMPATIBLE_IOCTL(TIOCMGET) COMPATIBLE_IOCTL(TIOCMBIC) COMPATIBLE_IOCTL(TIOCMBIS) COMPATIBLE_IOCTL(TIOCMSET) -COMPATIBLE_IOCTL(TIOCPKT) COMPATIBLE_IOCTL(TIOCNOTTY) COMPATIBLE_IOCTL(TIOCSTI) COMPATIBLE_IOCTL(TIOCOUTQ) COMPATIBLE_IOCTL(TIOCSPGRP) COMPATIBLE_IOCTL(TIOCGPGRP) -COMPATIBLE_IOCTL(TIOCGPTN) -COMPATIBLE_IOCTL(TIOCSPTLCK) COMPATIBLE_IOCTL(TIOCSERGETLSR) -COMPATIBLE_IOCTL(TIOCSIG) #ifdef TIOCSRS485 COMPATIBLE_IOCTL(TIOCSRS485) #endif diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 3c8825b67298..d36bc8d17e97 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -9,7 +9,6 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> -#include <linux/serial.h> /* Compact Flash */ struct at91_cf_data { @@ -42,15 +41,6 @@ struct atmel_nand_data { bool need_reset_workaround; }; - /* Serial */ -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 64d892f1e5cd..1775500294bb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -195,6 +195,7 @@ struct uart_port { #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) +#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19)) /* Port has hardware-assisted h/w flow control */ #define UPF_AUTO_CTS ((__force upf_t) (1 << 20)) #define UPF_AUTO_RTS ((__force upf_t) (1 << 21)) diff --git a/include/linux/tty.h b/include/linux/tty.h index 8156a9ee6fe6..69464c0d8068 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -316,7 +316,6 @@ struct tty_struct { struct tty_struct *link; struct fasync_struct *fasync; - int alt_speed; /* For magic substitution of 38400 bps */ wait_queue_head_t write_wait; wait_queue_head_t read_wait; struct work_struct hangup_work; diff --git a/include/uapi/asm-generic/ioctls.h b/include/uapi/asm-generic/ioctls.h index 143dacbb7d9a..06d5f7ddf84e 100644 --- a/include/uapi/asm-generic/ioctls.h +++ b/include/uapi/asm-generic/ioctls.h @@ -77,6 +77,7 @@ #define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ #define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ #define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ +#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */ #define FIONCLEX 0x5450 #define FIOCLEX 0x5451 diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 5d59c3ebf459..d2667ecd54ac 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -122,6 +122,9 @@ struct serial_rs485 { #define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for RTS pin after sent*/ #define SER_RS485_RX_DURING_TX (1 << 4) +#define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus + termination + (if supported) */ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ __u32 padding[5]; /* Memory is cheap, new structs diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9ec741b133fe..c34a2a3eeff5 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -83,7 +83,7 @@ /* Parisc type numbers. */ #define PORT_MUX 48 -/* Atmel AT91 / AT32 SoC */ +/* Atmel AT91 SoC */ #define PORT_ATMEL 49 /* Macintosh Zilog type numbers */ diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h index e7855dffd592..cf1455396df0 100644 --- a/include/uapi/linux/tty.h +++ b/include/uapi/linux/tty.h @@ -36,5 +36,6 @@ #define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ #define N_NCI 25 /* NFC NCI UART */ #define N_SPEAKUP 26 /* Speakup communication with synths */ +#define N_NULL 27 /* Null ldisc used for error handling */ #endif /* _UAPI_LINUX_TTY_H */ diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c index f18070118d05..171c3dee760e 100644 --- a/net/irda/ircomm/ircomm_tty_ioctl.c +++ b/net/irda/ircomm/ircomm_tty_ioctl.c @@ -97,33 +97,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self, self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN; } tty_port_set_check_carrier(&self->port, ~cflag & CLOCAL); -#if 0 - /* - * Set up parity check flag - */ - - if (I_INPCK(self->tty)) - driver->read_status_mask |= LSR_FE | LSR_PE; - if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty)) - driver->read_status_mask |= LSR_BI; - - /* - * Characters to ignore - */ - driver->ignore_status_mask = 0; - if (I_IGNPAR(driver->tty)) - driver->ignore_status_mask |= LSR_PE | LSR_FE; - - if (I_IGNBRK(self->tty)) { - self->ignore_status_mask |= LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(self->tty)) - self->ignore_status_mask |= LSR_OE; - } -#endif + self->settings.data_format = cval; ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); @@ -271,67 +245,6 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self, static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self, struct serial_struct __user *new_info) { -#if 0 - struct serial_struct new_serial; - struct ircomm_tty_cb old_state, *state; - - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - - - state = self - old_state = *self; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != state->settings.data_rate) || - (new_serial.close_delay != state->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (self->flags & ~ASYNC_USR_MASK))) - return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - self->flags = ((self->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - /* self->custom_divisor = new_serial.custom_divisor; */ - goto check_and_exit; - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - if (self->settings.data_rate != new_serial.baud_base) { - self->settings.data_rate = new_serial.baud_base; - ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE); - } - - self->close_delay = new_serial.close_delay * HZ/100; - self->closing_wait = new_serial.closing_wait * HZ/100; - /* self->custom_divisor = new_serial.custom_divisor; */ - - self->flags = ((self->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - - if (tty_port_initialized(self)) { - if (((old_state.flags & ASYNC_SPD_MASK) != - (self->flags & ASYNC_SPD_MASK)) || - (old_driver.custom_divisor != driver->custom_divisor)) { - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - driver->tty->alt_speed = 57600; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - driver->tty->alt_speed = 115200; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - driver->tty->alt_speed = 230400; - if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - driver->tty->alt_speed = 460800; - ircomm_tty_change_speed(driver); - } - } -#endif return 0; } @@ -367,24 +280,6 @@ int ircomm_tty_ioctl(struct tty_struct *tty, case TIOCGICOUNT: pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__); -#if 0 - save_flags(flags); cli(); - cnow = driver->icount; - restore_flags(flags); - p_cuser = (struct serial_icounter_struct __user *) arg; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd) || - put_user(cnow.rx, &p_cuser->rx) || - put_user(cnow.tx, &p_cuser->tx) || - put_user(cnow.frame, &p_cuser->frame) || - put_user(cnow.overrun, &p_cuser->overrun) || - put_user(cnow.parity, &p_cuser->parity) || - put_user(cnow.brk, &p_cuser->brk) || - put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; -#endif return 0; default: ret = -ENOIOCTLCMD; /* ioctls which we must ignore */ |