Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...

162 files changed, 4908 insertions, 3542 deletions

diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
new file mode 100644
index 000000000000..d2fe064a828b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -0,0 +1,10 @@
+* OMAP OCP2SCP - ocp interface to scp interface
+
+properties:
+- compatible : Should be "ti,omap-ocp2scp"
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ranges : the child address space are mapped 1:1 onto the parent address space
+- ti,hwmods : must be "ocp2scp_usb_phy"
+
+Sub-nodes:
+All the devices connected to ocp2scp are described using sub-node to ocp2scp
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
new file mode 100644
index 000000000000..0604d42f38d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -0,0 +1,30 @@
+* Samsung Exynos5 G-Scaler device
+
+G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
+
+Required properties:
+- compatible: should be "samsung,exynos5-gsc"
+- reg: should contain G-Scaler physical address location and length.
+- interrupts: should contain G-Scaler interrupt number
+
+Example:
+
+gsc_0:  gsc@0x13e00000 {
+	compatible = "samsung,exynos5-gsc";
+	reg = <0x13e00000 0x1000>;
+	interrupts = <0 85 0>;
+};
+
+Aliases:
+Each G-Scaler node should have a numbered alias in the aliases node,
+in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
+to retrieve the device IDs using "of_alias_get_id()" call.
+
+Example:
+
+aliases {
+	gsc0 =&gsc_0;
+	gsc1 =&gsc_1;
+	gsc2 =&gsc_2;
+	gsc3 =&gsc_3;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
new file mode 100644
index 000000000000..03dee50532f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -0,0 +1,196 @@
+Samsung GPIO and Pin Mux/Config controller
+
+Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
+controller. It controls the input/output settings on the available pads/pins
+and also provides ability to multiplex and configure the output of various
+on-chip controllers onto these pads.
+
+Required Properties:
+- compatible: should be one of the following.
+  - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
+  - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
+
+- reg: Base address of the pin controller hardware module and length of
+  the address space it occupies.
+
+- interrupts: interrupt specifier for the controller. The format and value of
+  the interrupt specifier depends on the interrupt parent for the controller.
+
+- Pin mux/config groups as child nodes: The pin mux (selecting pin function
+  mode) and pin config (pull up/down, driver strength) settings are represented
+  as child nodes of the pin-controller node. There should be atleast one
+  child node and there is no limit on the count of these child nodes.
+
+  The child node should contain a list of pin(s) on which a particular pin
+  function selection or pin configuration (or both) have to applied. This
+  list of pins is specified using the property name "samsung,pins". There
+  should be atleast one pin specfied for this property and there is no upper
+  limit on the count of pins that can be specified. The pins are specified
+  using pin names which are derived from the hardware manual of the SoC. As
+  an example, the pins in GPA0 bank of the pin controller can be represented
+  as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
+  The format of the pin names should be (as per the hardware manual)
+  "[pin bank name]-[pin number within the bank]".
+
+  The pin function selection that should be applied on the pins listed in the
+  child node is specified using the "samsung,pin-function" property. The value
+  of this property that should be applied to each of the pins listed in the
+  "samsung,pins" property should be picked from the hardware manual of the SoC
+  for the specified pin group. This property is optional in the child node if
+  no specific function selection is desired for the pins listed in the child
+  node. The value of this property is used as-is to program the pin-controller
+  function selector register of the pin-bank.
+
+  The child node can also optionally specify one or more of the pin
+  configuration that should be applied on all the pins listed in the
+  "samsung,pins" property of the child node. The following pin configuration
+  properties are supported.
+
+  - samsung,pin-pud: Pull up/down configuration.
+  - samsung,pin-drv: Drive strength configuration.
+  - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
+  - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
+
+  The values specified by these config properties should be derived from the
+  hardware manual and these values are programmed as-is into the pin
+  pull up/down and driver strength register of the pin-controller.
+
+  Note: A child should include atleast a pin function selection property or
+  pin configuration property (one or more) or both.
+
+  The client nodes that require a particular pin function selection and/or
+  pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
+  file.
+
+External GPIO and Wakeup Interrupts:
+
+The controller supports two types of external interrupts over gpio. The first
+is the external gpio interrupt and second is the external wakeup interrupts.
+The difference between the two is that the external wakeup interrupts can be
+used as system wakeup events.
+
+A. External GPIO Interrupts: For supporting external gpio interrupts, the
+   following properties should be specified in the pin-controller device node.
+
+- interrupt-controller: identifies the controller node as interrupt-parent.
+- #interrupt-cells: the value of this property should be 2.
+  - First Cell: represents the external gpio interrupt number local to the
+    external gpio interrupt space of the controller.
+  - Second Cell: flags to identify the type of the interrupt
+    - 1 = rising edge triggered
+    - 2 = falling edge triggered
+    - 3 = rising and falling edge triggered
+    - 4 = high level triggered
+    - 8 = low level triggered
+
+B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
+   child node representing the external wakeup interrupt controller should be
+   included in the pin-controller device node. This child node should include
+   the following properties.
+
+   - compatible: identifies the type of the external wakeup interrupt controller
+     The possible values are:
+     - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung Exynos4210 SoC.
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     wakeup interrupts are forwarded to.
+   - interrupt-controller: identifies the node as interrupt-parent.
+   - #interrupt-cells: the value of this property should be 2
+     - First Cell: represents the external wakeup interrupt number local to
+       the external wakeup interrupt space of the controller.
+     - Second Cell: flags to identify the type of the interrupt
+       - 1 = rising edge triggered
+       - 2 = falling edge triggered
+       - 3 = rising and falling edge triggered
+       - 4 = high level triggered
+       - 8 = low level triggered
+
+Aliases:
+
+All the pin controller nodes should be represented in the aliases node using
+the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+Example 1: A pin-controller node with pin groups.
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+Example 2: A pin-controller node with external wakeup interrupt controller node.
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+					<0 32 0>;
+		};
+	};
+
+Example 3: A uart client node that supports 'default' and 'flow-control' states.
+
+	uart@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+		pinctrl-names = "default", "flow-control;
+		pinctrl-0 = <&uart0_data>;
+		pinctrl-1 = <&uart0_data &uart0_fctl>;
+	};
+
+Example 4: Set up the default pin state for uart controller.
+
+	static int s3c24xx_serial_probe(struct platform_device *pdev) {
+		struct pinctrl *pinctrl;
+		...
+		...
+		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ad790fc25ed4..2201ff3002a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1768,59 +1768,6 @@ config FORCE_MAX_ZONEORDER
 	  This config option is actually maximum order plus one. For example,
 	  a value of 11 means that the largest free memory block is 2^10 pages.
 
-config LEDS
-	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
-		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
-		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
-	help
-	  If you say Y here, the LEDs on your machine will be used
-	  to provide useful information about your current system status.
-
-	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
-	  be able to select which LEDs are active using the options below. If
-	  you are compiling a kernel for the EBSA-110 or the LART however, the
-	  red LED will simply flash regularly to indicate that the system is
-	  still functional. It is safe to say Y here if you have a CATS
-	  system, but the driver will do nothing.
-
-config LEDS_TIMER
-	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			    || MACH_OMAP_PERSEUS2
-	depends on LEDS
-	depends on !GENERIC_CLOCKEVENTS
-	default y if ARCH_EBSA110
-	help
-	  If you say Y here, one of the system LEDs (the green one on the
-	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
-	  will flash regularly to indicate that the system is still
-	  operational. This is mainly useful to kernel hackers who are
-	  debugging unstable kernels.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
-config LEDS_CPU
-	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-			!ARCH_OMAP) \
-			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			|| MACH_OMAP_PERSEUS2
-	depends on LEDS
-	help
-	  If you say Y here, the red LED will be used to give a good real
-	  time indication of CPU usage, by lighting whenever the idle task
-	  is not currently executing.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
 config ALIGNMENT_TRAP
 	bool
 	depends on CPU_CP15_MMU
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000000..b12cf272ad0d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,457 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-6", "gpb-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe876e4..a4bd0c9a206e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -20,6 +20,7 @@
 */
 
 /include/ "skeleton.dtsi"
+/include/ "exynos4210-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos4210";
@@ -29,6 +30,9 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
 	};
 
 	gic:interrupt-controller@10490000 {
@@ -50,6 +54,39 @@
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+					<0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x03860000 0x1000>;
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 004aaa8d123c..b55794b494b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -27,6 +27,10 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		gsc3 = &gsc_3;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -460,4 +464,28 @@
 			#gpio-cells = <4>;
 		};
 	};
+
+	gsc_0:  gsc@0x13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+	};
+
+	gsc_1:  gsc@0x13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+	};
+
+	gsc_2:  gsc@0x13e20000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e20000 0x1000>;
+		interrupts = <0 87 0>;
+	};
+
+	gsc_3:  gsc@0x13e30000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e30000 0x1000>;
+		interrupts = <0 88 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5d1c48459e6e..3883f94fdbd0 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -430,5 +430,13 @@
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
 		};
+
+		ocp2scp {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp_usb_phy";
+		};
 	};
 };
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 2afdf67c2127..c285a9d777d9 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_ATMEL_SSC=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index d54e2acd3ab1..4ae57a34a582 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=y
+CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig
index ade6b2f23116..1e8712ef062e 100644
--- a/arch/arm/configs/at91sam9261_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index 1cf96264cba1..d2050cada82d 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=y
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 994d331b2319..e1b0e80b54a5 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index ad562ee64209..7cf87856d63c 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index bbf729e2fb6f..921480c23b98 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index e7d7942927f3..ea116cbdffa1 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 9160f3b7751f..42d5db1876ab 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
@@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index d5e260b8b160..52f1488591c7 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -100,7 +100,6 @@ CONFIG_USB_ETH=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 2e39f38b9627..a1501e1e1a90 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739f39b7..000000000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/include/asm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-	led_idle_start,
-	led_idle_end,
-	led_timer,
-	led_start,
-	led_stop,
-	led_claim,		/* override idle & timer leds */
-	led_release,		/* restore idle & timer leds */
-	led_start_timer_mode,
-	led_stop_timer_mode,
-	led_green_on,
-	led_green_off,
-	led_amber_on,
-	led_amber_off,
-	led_red_on,
-	led_red_off,
-	led_blue_on,
-	led_blue_off,
-	/*
-	 * I want this between led_timer and led_start, but
-	 * someone has decided to export this to user space
-	 */
-	led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1c4321430737..d81f3a6d9ad8 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -21,7 +21,6 @@ obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
 
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
 
-obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 1911dae19e4f..000000000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- *  Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
-	const char	name[8];
-	int		on;
-	int		off;
-};
-
-static const struct leds_evt_name evt_names[] = {
-	{ "amber", led_amber_on, led_amber_off },
-	{ "blue",  led_blue_on,  led_blue_off  },
-	{ "green", led_green_on, led_green_off },
-	{ "red",   led_red_on,   led_red_off   },
-};
-
-static ssize_t leds_store(struct device *dev,
-			struct device_attribute *attr,
-			const char *buf, size_t size)
-{
-	int ret = -EINVAL, len = strcspn(buf, " ");
-
-	if (len > 0 && buf[len] == '\0')
-		len--;
-
-	if (strncmp(buf, "claim", len) == 0) {
-		leds_event(led_claim);
-		ret = size;
-	} else if (strncmp(buf, "release", len) == 0) {
-		leds_event(led_release);
-		ret = size;
-	} else {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
-			if (strlen(evt_names[i].name) != len ||
-			    strncmp(buf, evt_names[i].name, len) != 0)
-				continue;
-			if (strncmp(buf+len, " on", 3) == 0) {
-				leds_event(evt_names[i].on);
-				ret = size;
-			} else if (strncmp(buf+len, " off", 4) == 0) {
-				leds_event(evt_names[i].off);
-				ret = size;
-			}
-			break;
-		}
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
-	.name		= "leds",
-	.dev_name	= "leds",
-};
-
-static struct device leds_device = {
-	.id		= 0,
-	.bus		= &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
-	leds_event(led_stop);
-	return 0;
-}
-
-static void leds_resume(void)
-{
-	leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
-	leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
-	.shutdown	= leds_shutdown,
-	.suspend	= leds_suspend,
-	.resume		= leds_resume,
-};
-
-static int __init leds_init(void)
-{
-	int ret;
-	ret = subsys_system_register(&leds_subsys, NULL);
-	if (ret == 0)
-		ret = device_register(&leds_device);
-	if (ret == 0)
-		ret = device_create_file(&leds_device, &dev_attr_event);
-	if (ret == 0)
-		register_syscore_ops(&leds_syscore_ops);
-	return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 693b744fd572..04eea22d7958 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/cpuidle.h>
+#include <linux/leds.h>
 
 #include <asm/cacheflush.h>
-#include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/thread_notify.h>
 #include <asm/stacktrace.h>
@@ -189,7 +189,7 @@ void cpu_idle(void)
 	while (1) {
 		tick_nohz_idle_enter();
 		rcu_idle_enter();
-		leds_event(led_idle_start);
+		ledtrig_cpu(CPU_LED_IDLE_START);
 		while (!need_resched()) {
 #ifdef CONFIG_HOTPLUG_CPU
 			if (cpu_is_offline(smp_processor_id()))
@@ -220,7 +220,7 @@ void cpu_idle(void)
 			} else
 				local_irq_enable();
 		}
-		leds_event(led_idle_end);
+		ledtrig_cpu(CPU_LED_IDLE_END);
 		rcu_idle_exit();
 		tick_nohz_idle_exit();
 		schedule_preempt_disabled();
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index af2afb019672..09be0c3c9069 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -25,7 +25,6 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 
-#include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/sched_clock.h>
 #include <asm/stacktrace.h>
@@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void)
 }
 #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
-	static unsigned int count = HZ/2;
-
-	if (--count == 0) {
-		count = HZ/2;
-		leds_event(led_timer);
-	}
-}
-#else
-#define	do_leds()
-#endif
-
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -102,7 +86,6 @@ static inline void do_leds(void)
 void timer_tick(void)
 {
 	profile_tick(CPU_PROFILING);
-	do_leds();
 	xtime_update(1);
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01fb7325fecc..9ac427a702da 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin, 1);
+			at91_set_deglitch(data->slot[i].detect_pin, 1);
 		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		switch (i) {
+		case 0:					/* slot A */
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA28, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA29, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PB3, 1);
+				at91_set_B_periph(AT91_PIN_PB4, 1);
+				at91_set_B_periph(AT91_PIN_PB5, 1);
+			}
+			slot_count++;
+			break;
+		case 1:					/* slot B */
+			/* CMD */
+			at91_set_B_periph(AT91_PIN_PA8, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_B_periph(AT91_PIN_PA9, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PA10, 1);
+				at91_set_B_periph(AT91_PIN_PA11, 1);
+				at91_set_B_periph(AT91_PIN_PA12, 1);
+			}
+			slot_count++;
+			break;
+		default:
+			printk(KERN_ERR
+			       "AT91: SD/MMC slot %d not available\n", i);
+			break;
+		}
+		if (slot_count) {
+			/* CLK */
+			at91_set_A_periph(AT91_PIN_PA27, 0);
+
+			mmc_data = *data;
+			platform_device_register(&at91rm9200_mmc_device);
 		}
 	}
 
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index bce572a530ef..af50ff3281c7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
 
 
 /* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
  *  MMC / SD Slot for Atmel MCI Driver
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 static struct mci_platform_data mmc_data;
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index bc2590d712d0..11e9fa835cde 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA2, 0);
 
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA6, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9261_mmc_device);
+	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 84b38105231e..144ef5de51b6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9b6ca734f1a9..7c0898fe20fa 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
 
 static struct resource mmc0_resources[] = {
 	[0] = {
@@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc0_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc1_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA12, 0);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA16, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin,
+					1);
+			at91_set_deglitch(data->slot[i].detect_pin,
+					1);
+		}
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		if (mmc_id == 0) {				/* MCI0 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA3, 1);
+					at91_set_A_periph(AT91_PIN_PA4, 1);
+					at91_set_A_periph(AT91_PIN_PA5, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA16, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA17, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA18, 1);
+					at91_set_A_periph(AT91_PIN_PA19, 1);
+					at91_set_A_periph(AT91_PIN_PA20, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA12, 0);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA17, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA18, 1);
-				at91_set_A_periph(AT91_PIN_PA19, 1);
-				at91_set_A_periph(AT91_PIN_PA20, 1);
+				mmc0_data = *data;
+				platform_device_register(&at91sam9263_mmc0_device);
 			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA1, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA0, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA3, 1);
-				at91_set_A_periph(AT91_PIN_PA4, 1);
-				at91_set_A_periph(AT91_PIN_PA5, 1);
+		} else if (mmc_id == 1) {			/* MCI1 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA8, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA21, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA22, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA23, 1);
+					at91_set_A_periph(AT91_PIN_PA24, 1);
+					at91_set_A_periph(AT91_PIN_PA25, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
 			}
-		}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA6, 0);
 
-		mmc0_data = *data;
-		platform_device_register(&at91sam9263_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA6, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA22, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA23, 1);
-				at91_set_A_periph(AT91_PIN_PA24, 1);
-				at91_set_A_periph(AT91_PIN_PA25, 1);
-			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA7, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA8, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-				at91_set_A_periph(AT91_PIN_PA10, 1);
-				at91_set_A_periph(AT91_PIN_PA11, 1);
+				mmc1_data = *data;
+				platform_device_register(&at91sam9263_mmc1_device);
 			}
 		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index b3d365dadef5..1fad22f7e21f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PA3, 1);
-		at91_set_A_periph(AT91_PIN_PA4, 1);
-		at91_set_A_periph(AT91_PIN_PA5, 1);
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA2, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9rl_mmc_device);
 	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9rl_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index de7be1931817..93a832f70232 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 
@@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void)
 	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
 	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
 	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	at91_add_device_mci(0, &afeb9260_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index a5b002f32a61..71d8f362a1d5 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 	// .vcc_pin	= -EINVAL,
 // };
 
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB10,
+		.wp_pin		= AT91_PIN_PC14,
+	},
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
@@ -150,7 +150,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(0, &carmeva_mmc_data);
+	at91_add_device_mci(0, &carmeva_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index ecbc13b594de..e71c473316e3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = {
 
 static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0x68),
-		.type	= "ds1339",
+		I2C_BOARD_INFO("ds1339", 0x68),
 	},
 };
 
@@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA29,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA29,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static void __init cpu9krea_board_init(void)
@@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&cpu9krea_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	at91_add_device_mci(0, &cpu9krea_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(cpu9krea_i2c_devices,
 		ARRAY_SIZE(cpu9krea_i2c_devices));
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2e6d043c82f2..2cbd1a2b6c35 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 	.pullup_pin	= AT91_PIN_PC14,
 };
 
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
-	.det_pin	= AT91_PIN_PC2,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
@@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&cpuat91_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	at91_add_device_mci(0, &cpuat91_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Platform devices */
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 462bc319cbc5..3e37437a7a61 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 	.rst_pin	= AT91_PIN_PD2,
 };
 
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD5,
+		.wp_pin		= AT91_PIN_PD6,
+	},
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
@@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = {
 
 static void __init csb337_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* Serial */
 	/* DBGU on ttyS0 */
 	at91_register_uart(0, 0, 0);
@@ -240,7 +238,7 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
+	at91_add_device_mci(0, &csb337_mci0_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d1e1f3fc0a47..0cfac16ee9d5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
 	.rst_pin	= AT91_PIN_PC5,
 };
 
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -113,7 +113,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(0, &eb9200_mmc_data);
+	at91_add_device_mci(0, &eb9200_mci0_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 9c24cb25707c..3d931ffac4bf 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ecb_at91board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void)
 	at91_add_device_i2c(NULL, 0);
 
 	/* MMC */
-	at91_add_device_mmc(0, &ecb_at91mmc_data);
+	at91_add_device_mci(0, &ecbat91_mci0_data);
 
 	/* SPI */
 	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+	/* LEDs */
+	at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
 }
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 82bdfde3405f..d93658a2b128 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 	.pullup_pin	= AT91_PIN_PB13,
 };
 
-static struct at91_mmc_data __initdata eco920_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 0,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 1,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data eco920_flash_data = {
@@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = {
 	},
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+	{       /* D1 */
+		.name                   = "led1",
+		.gpio                   = AT91_PIN_PB0,
+		.active_low             = 1,
+		.default_trigger        = "heartbeat",
+	},
+	{       /* D2 */
+		.name                   = "led2",
+		.gpio                   = AT91_PIN_PB1,
+		.active_low             = 1,
+		.default_trigger        = "timer",
+	}
+};
+
 static void __init eco920_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* DBGU on ttyS0. (Rx & Tx only */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
@@ -104,7 +120,7 @@ static void __init eco920_board_init(void)
 	at91_add_device_usbh(&eco920_usbh_data);
 	at91_add_device_udc(&eco920_udc_data);
 
-	at91_add_device_mmc(0, &eco920_mmc_data);
+	at91_add_device_mci(0, &eco920_mci0_data);
 	platform_device_register(&eco920_flash);
 
 	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
@@ -127,6 +143,8 @@ static void __init eco920_board_init(void)
 	);
 
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+	/* LEDs */
+	at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
 }
 
 MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 6cc83a87d77c..fa98abacb1ba 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
 };
 
 /* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 /* LEDs */
@@ -152,7 +152,7 @@ static void __init flexibity_board_init(void)
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
+	at91_add_device_mci(0, &flexibity_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
 }
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 69ab1247ef81..6e47071d8206 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -247,7 +247,7 @@ static void __init foxg20_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&foxg20_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &foxg20_mmc_data);
+	at91_add_device_mci(0, &foxg20_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 64c1dbf88a07..86050da3ba53 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 	.pullup_pin	= AT91_PIN_PB7,
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
 static void __init kafa_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -88,6 +97,8 @@ static void __init kafa_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
 }
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 5d96cb85175f..abe9fed7a3e0 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
 	.pullup_pin	= AT91_PIN_PB22,
 };
 
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };
 
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PC19,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PC18,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
+};
+
 static void __init kb9202_board_init(void)
 {
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -121,13 +136,15 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &kb9202_mmc_data);
+	at91_add_device_mci(0, &kb9202_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&kb9202_nand_data);
+	/* LEDs */
+	at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
 }
 
 MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 18103c5d993c..9cda3fd346ae 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -354,7 +355,7 @@ static void __init neocore926_board_init(void)
 	neocore926_add_device_ts();
 
 	/* MMC */
-	at91_add_device_mmc(1, &neocore926_mmc_data);
+	at91_add_device_mci(0, &neocore926_mci0_data);
 
 	/* Ethernet */
 	at91_add_device_eth(&neocore926_macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 127065504508..f83e1de699e6 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	},
 };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
@@ -112,7 +112,7 @@ static void __init picotux200_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
+	at91_add_device_mci(0, &picotux200_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index bf351e285422..799f214edebe 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -245,7 +245,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index cc2bf9796073..66338e7ebfba 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 #endif
 
@@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = {
 
 static void __init dk_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -208,7 +205,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &dk_mmc_data);
+	at91_add_device_mci(0, &dk_mci0_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 62e19e64c9d3..5d1b5729dc69 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	}
 };
 #endif
 
@@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -177,7 +174,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index c3b43aefdb75..a0ecf04e9ae3 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
 /*
  * SD/MC
  */
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB27,
-	.wp_pin		= AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PB29,
+	},
 };
 
 /*
@@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = {
  */
 static void __init rsi_ews_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	/* This one is for debugging */
@@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void)
 	at91_add_device_spi(rsi_ews_spi_devices,
 			ARRAY_SIZE(rsi_ews_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	at91_add_device_mci(0, &rsi_ews_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&rsiews_nor_flash);
 	/* LEDs */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 7bf6da70d7d5..c5f01acce3c0 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC8,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC8,
+		.wp_pin		= AT91_PIN_PC4,
+	},
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* D1 */
+		.name			= "led1",
+		.gpio			= AT91_PIN_PA9,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* D2 */
+		.name			= "led2",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	}
 };
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -194,9 +209,11 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 889c1bf71eb5..8cd6e679fbe0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -329,7 +329,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 2269be5fa384..27b3af1a3047 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
@@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -598,7 +596,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
 #else
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 #endif
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 82adf581afc2..073e17403d98 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -420,7 +421,7 @@ static void __init ek_board_init(void)
 	/* Touchscreen */
 	ek_add_device_ts();
 	/* MMC */
-	at91_add_device_mmc(1, &ek_mmc_data);
+	at91_add_device_mci(1, &mci1_data);
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 4ea4ee00364b..3ab2b86a3762 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void)
  * MCI (SD/MMC)
  * wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[1] = {
 		.bus_width	= 4,
@@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
 	},
 
 };
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 static void __init ek_add_device_mmc(void)
 {
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	if (ek_have_2mmc()) {
 		ek_mmc_data.slot[0].bus_width = 4;
 		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
 		ek_mmc_data.slot[0].wp_pin = -1;
 	}
 	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
 }
 
 /*
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index e7dc3ead7045..fb89ea92e3f2 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA15,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA15,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -303,7 +304,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 29eae1626bf7..c3fb31d5116e 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -83,7 +83,6 @@ static void __init add_device_nand(void)
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
@@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = {
 		.wp_pin		= -1,
 	},
 };
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 
 /*
@@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void)
 	/* NAND */
 	add_device_nand();
 	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
 	/* W1 */
 	add_w1();
 }
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1476b9fe7b9..6ea069b57335 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
  * SPI devices.
  */
 static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 0,
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	}
-#endif
 };
 
 static struct spi_board_info usb_a9g20_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 516d340549d8..f162fdfd66eb 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
 /*
  * MMC
  */
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB9,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -568,7 +566,7 @@ static void __init yl9200_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &yl9200_mmc_data);
+	at91_add_device_mci(0, &yl9200_mci0_data);
 	/* NAND */
 	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 369afc2ffc5b..c55a4364ffb4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,6 @@ struct at91_can_data {
 extern void __init at91_add_device_can(struct at91_can_data *data);
 
  /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 8dfafe76ffe6..1b1e62b5f41b 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
 #else
 void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
 #endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	at91_set_gpio_output(cpu_led, 1);
-	at91_set_gpio_output(timer_led, 1);
-
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index aed9eb664499..6da6940b3656 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,5 +15,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
-leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
-obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index bbc449fbe14a..000000000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/leds.c
- *
- *  Integrator LED control routines
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 pddr;
-
-	local_irq_save(flags);
-	switch(ledevt) {
-	case led_idle_start:
-		break;
-
-	case led_idle_end:
-		break;
-
-	case led_timer:
-		pddr = clps_readb(PDDR);
-		clps_writeb(pddr ^ 1, PDDR);
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_p720t())
-		leds_event = p720t_leds_event;
-
-	return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f266d90b9efc..b752b586fc2f 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/pgtable.h>
@@ -34,6 +36,8 @@
 #include <asm/mach/map.h>
 #include <mach/syspld.h>
 
+#include <asm/hardware/clps7111.h>
+
 #include "common.h"
 
 /*
@@ -107,6 +111,64 @@ static void __init p720t_init_early(void)
 	}
 }
 
+/*
+ * LED controled by CPLD
+ */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void p720t_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	u8 reg = clps_readb(PDDR);
+
+	if (b != LED_OFF)
+		reg |= 0x1;
+	else
+		reg &= ~0x1;
+
+	clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+	u8 reg = clps_readb(PDDR);
+
+	return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_p720t())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "p720t:0";
+	cdev->brightness_set = p720t_led_set;
+	cdev->brightness_get = p720t_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+#endif
+
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac835802..935e4af01a27 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= core.o io.o
+obj-y			:= core.o io.o leds.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 99e14e362500..0398258c20cd 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,52 +1,71 @@
 /*
- *  linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
  *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA-110 LED control routines.  We use the led as follows:
- *
- *   - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
-#include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include "core.h"
 
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void ebsa110_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_lock_irqsave(&leds_lock, flags);
+	if (b != LED_OFF)
+		reg |= 0x80;
+	else
+		reg &= ~0x80;
 
-	switch(ledevt) {
-	case led_timer:
-		*(volatile unsigned char *)SOFT_BASE ^= 128;
-		break;
+	__raw_writeb(reg, SOFT_BASE);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+	u8 reg = __raw_readb(SOFT_BASE);
 
-	spin_unlock_irqrestore(&leds_lock, flags);
+	return (reg & 0x80) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
 {
-	if (machine_is_ebsa110())
-		leds_event = ebsa110_leds_event;
+
+	struct led_classdev *cdev;
+	int ret;
+
+	if (!machine_is_ebsa110())
+		return -ENODEV;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->name = "ebsa110:0";
+	cdev->brightness_set = ebsa110_led_set;
+	cdev->brightness_get = ebsa110_led_get;
+	cdev->default_trigger = "heartbeat";
+
+	ret = led_classdev_register(NULL, cdev);
+	if (ret	< 0) {
+		kfree(cdev);
+		return ret;
+	}
 
 	return 0;
 }
 
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
+#endif
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6c3299ebbfc5..412884dafa6c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -405,6 +405,8 @@ config MACH_EXYNOS4_DT
 	select USE_OF
 	select ARM_AMBA
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	select PINCTRL
+	select PINCTRL_EXYNOS4
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
 	  Select this if a fdt blob is available for the Exynos4 SoC based board.
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 618d0aaaa599..f3171c3f3d94 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -547,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid",
+	},
+	.sources = &exynos5_clkset_aclk,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
+	[0] = &exynos5_clk_sclk_vpll.clk,
+	[1] = &exynos5_clk_mout_cpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
+	.sources	= exynos5_clkset_aclk_300_mid1_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl_mid1",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl_mid1,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
+	[0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
+	[1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
+	.sources	= exynos5_clkset_aclk_300_gscl_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
+	.clk	= {
+		.name		= "mout_aclk_300_gscl",
+	},
+	.sources = &exynos5_clkset_aclk_300_gscl,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_gscl_300_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &exynos5_clk_mout_aclk_300_gscl.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_gscl_300 = {
+	.sources	= exynos5_clk_src_gscl_300_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
+	.clk	= {
+		.name		= "aclk_300_gscl",
+	},
+	.sources = &exynos5_clk_src_gscl_300,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
+};
+
 static struct clk exynos5_init_clocks_off[] = {
 	{
 		.name		= "timers",
@@ -755,6 +817,26 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peric_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.0",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.1",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.2",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "gscl",
+		.devname	= "exynos-gsc.3",
+		.enable		= exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
 		.name		= SYSMMU_CLOCK_NAME,
 		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
 		.enable		= &exynos5_clk_ip_mfc_ctrl,
@@ -1225,6 +1307,10 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_aclk_266,
 	&exynos5_clk_aclk_200,
 	&exynos5_clk_aclk_166,
+	&exynos5_clk_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl,
+	&exynos5_clk_mout_aclk_300_gscl_mid,
+	&exynos5_clk_mout_aclk_300_gscl_mid1,
 	&exynos5_clk_aclk_66_pre,
 	&exynos5_clk_aclk_66,
 	&exynos5_clk_dout_mmc0,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4eb39cdf75ea..715b690e5009 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
 {
 	int irq;
 
+#ifdef CONFIG_PINCTRL_SAMSUNG
+	/*
+	 * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
+	 * functionality along with support for external gpio and wakeup
+	 * interrupts. If the samsung pinctrl driver is enabled and includes
+	 * the wakeup interrupt support, then the setting up external wakeup
+	 * interrupts here can be skipped. This check here is temporary to
+	 * allow exynos4 platforms that do not use Samsung pinctrl driver to
+	 * co-exist with platforms that do. When all of the Samsung Exynos4
+	 * platforms switch over to using the pinctrl driver, the wakeup
+	 * interrupt support code here can be completely removed.
+	 */
+	struct device_node *pctrl_np, *wkup_np;
+	const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
+
+	for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+		if (of_device_is_available(pctrl_np)) {
+			wkup_np = of_find_compatible_node(pctrl_np, NULL,
+							wkup_compat);
+			if (wkup_np)
+				return -ENODEV;
+		}
+	}
+#endif
+
 	if (soc_is_exynos5250())
 		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
 	else
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 6d33f50c2e56..5aa77f996e59 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -121,6 +121,11 @@
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
 
+#define EXYNOS5_PA_GSC0			0x13E00000
+#define EXYNOS5_PA_GSC1			0x13E10000
+#define EXYNOS5_PA_GSC2			0x13E20000
+#define EXYNOS5_PA_GSC3			0x13E30000
+
 #define EXYNOS5_PA_SYSMMU_MDMA1		0x10A40000
 #define EXYNOS5_PA_SYSMMU_SSS		0x10A50000
 #define EXYNOS5_PA_SYSMMU_2D		0x10A60000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ef770bc2318f..e707eb1b1eab 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -56,6 +56,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
+				"exynos-gsc.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
+				"exynos-gsc.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
+				"exynos-gsc.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
+				"exynos-gsc.3", NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b25946f..0b64dd430d61 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
-obj-$(CONFIG_LEDS)	+=$(leds-y)
 
 obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 5bd266754b95..000000000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Amber - On if system is not idle
- *  - Red   - currently unused
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
-		hw_led_state |= XBUS_LED_AMBER;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= XBUS_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		*XBUS_LEDS = hw_led_state;
-
-	spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_ebsa285())
-		leds_event = ebsa285_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 27716a7e5fc1..b09551ef89ca 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
  */
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
@@ -13,6 +15,85 @@
 
 #include "common.h"
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct ebsa285_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} ebsa285_leds[] = {
+	{ "ebsa285:amber", "heartbeat", },
+	{ "ebsa285:green", "cpu0", },
+	{ "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	if (b != LED_OFF)
+		*XBUS_LEDS |= led->mask;
+	else
+		*XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+	struct ebsa285_led *led = container_of(cdev,
+			struct ebsa285_led, cdev);
+
+	return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+	int i;
+
+	if (machine_is_ebsa285())
+		return -ENODEV;
+
+	/* 3 LEDS All ON */
+	*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+		struct ebsa285_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = ebsa285_leds[i].name;
+		led->cdev.brightness_set = ebsa285_led_set;
+		led->cdev.brightness_get = ebsa285_led_get;
+		led->cdev.default_trigger = ebsa285_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+#endif
+
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index cac9f67e7da7..d2d14339c6c4 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -27,13 +28,6 @@
 #define GP1_IO_BASE		0x338
 #define GP2_IO_BASE		0x33a
 
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS	0
-#else
-#define DEFAULT_LEDS	GPIO_GREEN_LED
-#endif
-
 /*
  * Winbond WB83977F accessibility stuff
  */
@@ -611,15 +605,9 @@ static void __init rwa010_init(void)
 static int __init nw_hw_init(void)
 {
 	if (machine_is_netwinder()) {
-		unsigned long flags;
-
 		wb977_init();
 		cpld_init();
 		rwa010_init();
-
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 	return 0;
 }
@@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd)
 	}
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct netwinder_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} netwinder_leds[] = {
+	{ "netwinder:green", "heartbeat", },
+	{ "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ *  - setting bit means turn off LED
+ *  - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	nw_gpio_modify_op(led->mask, reg);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+	struct netwinder_led *led = container_of(cdev,
+			struct netwinder_led, cdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	reg = nw_gpio_read();
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_netwinder())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+		struct netwinder_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = netwinder_leds[i].name;
+		led->cdev.brightness_set = netwinder_led_set;
+		led->cdev.brightness_get = netwinder_led_get;
+		led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = GPIO_GREEN_LED;
+		else
+			led->mask = GPIO_RED_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+#endif
+
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 5a2bd89cbdca..000000000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Red   - On if the system is not idle
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = GPIO_GREEN_LED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= GPIO_GREEN_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_GREEN_LED;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-
-	if  (led_state & LED_STATE_ENABLED) {
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-	}
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_netwinder())
-		leds_event = netwinder_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef966e1f5..5521d18bf19a 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
 
 # Object file lists.
 
-obj-y					:= core.o lm.o
+obj-y					:= core.o lm.o leds.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
-obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index a432d4325f89..dad3cb74ed31 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -28,7 +28,6 @@
 #include <mach/cm.h>
 #include <mach/irqs.h>
 
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
@@ -128,8 +127,6 @@ static struct amba_pl010_data integrator_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
 static DEFINE_RAW_SPINLOCK(cm_lock);
 
 /**
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57adb043..1a78692e32a4 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
  */
 void cm_control(u32, u32);
 
+#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
 #define CM_CTRL_REMAP			(1 << 2)
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 466defa97842..7a7f6d3273bf 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,90 +1,125 @@
 /*
- *  linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
  *
- *  Integrator/AP and Integrator/CP LED control routines
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
+#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
 
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG	(__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
 
-static void integrator_leds_event(led_event_t ledevt)
+struct integrator_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} integrator_leds[] = {
+	{ "integrator:green0", "heartbeat", },
+	{ "integrator:yellow", },
+	{ "integrator:red", },
+	{ "integrator:green1", },
+	{ "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	unsigned long flags;
-	const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
-	unsigned int update_alpha_leds;
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	// yup, change the LEDs
-	local_irq_save(flags);
-	update_alpha_leds = 0;
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
 
-	switch(ledevt) {
-	case led_idle_start:
-		cm_control(CM_CTRL_LED, 0);
-		break;
+	while (__raw_readl(ALPHA_REG) & 1)
+		cpu_relax();
 
-	case led_idle_end:
-		cm_control(CM_CTRL_LED, CM_CTRL_LED);
-		break;
+	__raw_writel(reg, LEDREG);
+}
 
-	case led_timer:
-		saved_leds ^= GREEN_LED;
-		update_alpha_leds = 1;
-		break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+	struct integrator_led *led = container_of(cdev,
+						 struct integrator_led, cdev);
+	u32 reg = __raw_readl(LEDREG);
 
-	case led_red_on:
-		saved_leds |= RED_LED;
-		update_alpha_leds = 1;
-		break;
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
 
-	case led_red_off:
-		saved_leds &= ~RED_LED;
-		update_alpha_leds = 1;
-		break;
+static void cm_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	if (b != LED_OFF)
+		cm_control(CM_CTRL_LED, CM_CTRL_LED);
+	else
+		cm_control(CM_CTRL_LED, 0);
+}
 
-	default:
-		break;
-	}
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+	u32 reg = readl(CM_CTRL);
 
-	if (update_alpha_leds) {
-		while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
-		__raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
-	}
-	local_irq_restore(flags);
+	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
 
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
 {
-	if (machine_is_integrator() || machine_is_cintegrator())
-		leds_event = integrator_leds_event;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+		struct integrator_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+
+		led->cdev.name = integrator_leds[i].name;
+
+		if (i == 4) { /* Setting for LED in core module */
+			led->cdev.brightness_set = cm_led_set;
+			led->cdev.brightness_get = cm_led_get;
+		} else {
+			led->cdev.brightness_set = integrator_led_set;
+			led->cdev.brightness_get = integrator_led_get;
+		}
+
+		led->cdev.default_trigger = integrator_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
 
 	return 0;
 }
 
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9133c6..9324ef965c26 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj-				:=
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o
 
-# LEDs
-obj-$(CONFIG_LEDS)		+= leds.o
-
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 73bd63812878..47399bc3c024 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
 }
 
 
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	gpio_direction_output(cpu_led, 1);
-	gpio_direction_output(timer_led, 1);
-
-	ks8695_leds_cpu	  = cpu_led;
-	ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
 /* -------------------------------------------------------------------- */
 
 /*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9aa7d13..1e6594a0f297 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
 extern void __init ks8695_add_device_lan(void);
 extern void __init ks8695_add_device_hpna(void);
 
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
  /* PCI */
 #define KS8695_MODE_PCI		0
 #define KS8695_MODE_MINIPCI	1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd707547293..000000000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
-	gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
-	gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
-	unsigned long is_off = gpio_get_value(led);
-	if (is_off)
-		ks8695_led_on(led);
-	else
-		ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		ks8695_led_toggle(ks8695_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-		return -ENODEV;
-
-	leds_event = ks8695_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 398e9e53e189..cd169c386161 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
 
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
-obj-$(CONFIG_LEDS)			+= $(led-y)
-
 ifneq ($(CONFIG_FB_OMAP),)
 obj-y += lcd_dma.o
 endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af283a2bc7c7..376f7f29ef77 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,6 +32,7 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -307,12 +308,39 @@ static struct platform_device h2_irda_device = {
 	.resource	= h2_irda_resources,
 };
 
+static struct gpio_led h2_gpio_led_pins[] = {
+	{
+		.name		= "h2:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h2:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+	.leds		= h2_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h2_gpio_led_data,
+	},
+};
+
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
 	&h2_smc91x_device,
 	&h2_irda_device,
 	&h2_kp_device,
+	&h2_gpio_leds,
 };
 
 static void __init h2_init_smc91x(void)
@@ -407,6 +435,10 @@ static void __init h2_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	h2_smc91x_resources[1].start = gpio_to_irq(0);
 	h2_smc91x_resources[1].end = gpio_to_irq(0);
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 06d11b1ee9c6..ededdb7ef28c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -32,6 +32,7 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -325,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpio_led h3_gpio_led_pins[] = {
+	{
+		.name		= "h3:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h3:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+	.leds		= h3_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3_gpio_led_data,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -332,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
 	&intlat_device,
 	&h3_kp_device,
 	&h3_lcd_device,
+	&h3_gpio_leds,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -399,6 +427,10 @@ static void __init h3_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	smc91x_resources[1].start = gpio_to_irq(40);
 	smc91x_resources[1].end = gpio_to_irq(40);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 2f1f9b967576..5973945a8741 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -382,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
 	.id		= -1,
 };
 
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
 static struct platform_device *mistral_devices[] __initdata = {
 	&osk5912_kp_device,
 	&mistral_bl_device,
 	&osk5912_lcd_device,
+	&mistral_gpio_leds,
 };
 
 static int mistral_get_pendown_state(void)
@@ -510,6 +537,12 @@ static void __init osk_mistral_init(void)
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	i2c_register_board_info(1, mistral_i2c_board_info,
 			ARRAY_SIZE(mistral_i2c_board_info));
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index 6f958aec9459..000000000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	static struct h2p2_dbg_fpga __iomem *fpga;
-	static u16 led_state, hw_led_state;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (!fpga)
-			fpga = ioremap(H2P2_DBG_FPGA_START,
-						H2P2_DBG_FPGA_SIZE);
-		if (fpga) {
-			led_state |= LED_STATE_ENABLED;
-			__raw_writew(~0, &fpga->leds);
-		}
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (! machine_is_omap_perseus2()) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		led_state &= ~LED_STATE_ENABLED;
-		if (fpga) {
-			__raw_writew(~0, &fpga->leds);
-			if (evt == led_halted) {
-				iounmap(fpga);
-				fpga = NULL;
-			}
-		}
-
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (machine_is_omap_perseus2())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED && fpga)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8d02c..000000000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= 0;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= 0;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~0;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426b84f..000000000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	(1 << 0)
-#define LED_STATE_CLAIMED	(1 << 1)
-static u8 led_state;
-
-#define	TIMER_LED		(1 << 3)	/* Mistral board */
-#define	IDLE_LED		(1 << 4)	/* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context.  This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
-	int	red = 0;
-	int	green = 0;
-
-	if (hw_led_state & TIMER_LED)
-		red = 1;
-	else if (hw_led_state & IDLE_LED)
-		green = 1;
-	/* else both sides are disabled */
-
-	gpio_set_value(GPIO_LED_GREEN, green);
-	gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
-	unsigned long	flags;
-	u16		leds;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	leds = hw_led_state;
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_halted:
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-	case led_timer:
-		hw_led_state ^= TIMER_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_start:	/* idle == off */
-		hw_led_state &= ~IDLE_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_end:
-		hw_led_state |= IDLE_LED;
-		mistral_setled();
-		break;
-
-#endif	/* CONFIG_OMAP_OSK_MISTRAL */
-
-	default:
-		break;
-	}
-
-	leds ^= hw_led_state;
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 4071479f7106..000000000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (machine_is_omap_innovator())
-		leds_event = innovator_leds_event;
-
-	else if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2())
-		leds_event = h2p2_dbg_leds_event;
-
-	else if (machine_is_omap_osk())
-		leds_event = osk_leds_event;
-
-	else
-		return -1;
-
-	if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-			|| machine_is_omap_osk()
-#endif
-			) {
-
-		/* LED1/LED2 pins can be used as GPIO (as done here), or by
-		 * the LPG (works even in deep sleep!), to drive a bicolor
-		 * LED on the H2 sample board, and another on the H2/P2
-		 * "surfer" expansion board.
-		 *
-		 * The same pins drive a LED on the OSK Mistral board, but
-		 * that's a different kind of LED (just one color at a time).
-		 */
-		omap_cfg_reg(P18_1610_GPIO3);
-		if (gpio_request(3, "LED red") == 0)
-			gpio_direction_output(3, 1);
-		else
-			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
-		omap_cfg_reg(MPUIO4);
-		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
-			gpio_direction_output(OMAP_MPUIO(4), 1);
-		else
-			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
-	}
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc376c..000000000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4062480bfec7..4d4816fd6fc9 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index eae49c3980c9..74529549130c 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,7 +46,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index edc30b8b77ed..a6219eaf1f68 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -48,6 +48,7 @@ config ARCH_OMAP3
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
+	select OMAP_INTERCONNECT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -67,6 +68,7 @@ config ARCH_OMAP4
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+	select OMAP_INTERCONNECT
 
 config SOC_OMAP5
 	bool "TI OMAP5"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 845202358ddc..7d6abda3b74e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -180,11 +180,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 
-# L3 interconnect
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap_l3_noc.o
-
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 78a6a11d8216..9b1c95310291 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -18,7 +18,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 2f5dc54cd4cd..51ba2b81a10b 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 399130fac0b6..0a56b9444f1b 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,8 +19,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
@@ -53,12 +53,6 @@
 #define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
 
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED		0
-
 /*****************************************************************************
  * 16M NOR Flash on Device bus CS1
  ****************************************************************************/
@@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
 	.resource		= &rd88f5182_nor_flash_resource,
 };
 
-#ifdef CONFIG_LEDS
-
 /*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
  ****************************************************************************/
 
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
-	int val;
-
-	if (evt == led_idle_end)
-		val = 1;
-	else if (evt == led_idle_start)
-		val = 0;
-	else
-		return;
-
-	gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
-	int pin;
-
-	if (machine_is_rd88f5182()) {
-		pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED		0
 
-		if (gpio_request(pin, "DBGLED") == 0) {
-			if (gpio_direction_output(pin, 0) != 0) {
-				printk(KERN_ERR "rd88f5182_dbgled_init failed "
-						"to set output pin %d\n", pin);
-				gpio_free(pin);
-				return 0;
-			}
-		} else {
-			printk(KERN_ERR "rd88f5182_dbgled_init failed "
-					"to request gpio %d\n", pin);
-			return 0;
-		}
-
-		leds_event = rd88f5182_dbgled_event;
-	}
-
-	return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+	{
+		.name		= "rd88f5182:cpu",
+		.default_trigger = "cpu0",
+		.gpio		= RD88F5182_GPIO_LED,
+	},
+};
 
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+	.leds		= rd88f5182_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
 
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rd88f5182_gpio_led_data,
+	},
+};
 
 /*****************************************************************************
  * PCI
@@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
 
 	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
+	platform_device_register(&rd88f5182_gpio_leds);
 
 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
 }
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 92df49c1b62a..ed50910b08a4 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -20,7 +20,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2bedc9ed076c..ee88d6eae648 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -98,12 +98,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-
-obj-$(CONFIG_LEDS)		+= $(led-y)
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 6ff466bd43e8..ae1e9977603e 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -191,6 +191,87 @@ static void __init idp_map_io(void)
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} idp_leds[] = {
+	{ "idp:green", "heartbeat", },
+	{ "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+	u32 reg = IDP_CPLD_LED_CONTROL;
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+
+	IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+
+	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_pxa_idp())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+		struct idp_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = idp_leds[i].name;
+		led->cdev.brightness_set = idp_led_set;
+		led->cdev.brightness_get = idp_led_get;
+		led->cdev.default_trigger = idp_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = IDP_HB_LED;
+		else
+			led->mask = IDP_BUSY_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
 
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b060025d11..000000000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= IDP_HB_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_HB_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_HB_LED;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
-	else
-		IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c884a7c..000000000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision.  Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
-	else
-		LUB_DISC_BLNK_LED |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab340fe6..000000000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author:     Nicolas Pitre
- * Created:    Nov 05, 2002
- * Copyright:  MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
-	else
-		MST_LEDCTRL |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6afaa..000000000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
-	if (machine_is_lubbock())
-		leds_event = lubbock_leds_event;
-	if (machine_is_mainstone())
-		leds_event = mainstone_leds_event;
-	if (machine_is_pxa_idp())
-		leds_event = idp_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01345a..000000000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0ca0db787903..3c48035afd6b 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/major.h>
@@ -23,6 +24,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -549,6 +552,98 @@ static void __init lubbock_map_io(void)
 	PCFR |= PCFR_OPDE;
 }
 
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} lubbock_leds[] = {
+	{ "lubbock:D28", "default-on", },
+	{ "lubbock:D27", "cpu0", },
+	{ "lubbock:D26", "heartbeat" },
+	{ "lubbock:D25", },
+	{ "lubbock:D24", },
+	{ "lubbock:D23", },
+	{ "lubbock:D22", },
+	{ "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_lubbock())
+		return -ENODEV;
+
+	/* All ON */
+	LUB_DISC_BLNK_LED |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+		struct lubbock_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = lubbock_leds[i].name;
+		led->cdev.brightness_set = lubbock_led_set;
+		led->cdev.brightness_get = lubbock_led_get;
+		led->cdev.default_trigger = lubbock_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 1aebaf719462..bdc6c335830a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -613,6 +615,98 @@ static void __init mainstone_map_io(void)
  	PCFR = 0x66;
 }
 
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} mainstone_leds[] = {
+	{ "mainstone:D28", "default-on", },
+	{ "mainstone:D27", "cpu0", },
+	{ "mainstone:D26", "heartbeat" },
+	{ "mainstone:D25", },
+	{ "mainstone:D24", },
+	{ "mainstone:D23", },
+	{ "mainstone:D22", },
+	{ "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_mainstone())
+		return -ENODEV;
+
+	/* All ON */
+	MST_LEDCTRL |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+		struct mainstone_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = mainstone_leds[i].name;
+		led->cdev.brightness_set = mainstone_led_set;
+		led->cdev.brightness_get = mainstone_led_get;
+		led->cdev.default_trigger = mainstone_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index ff007d15e0ec..682467480588 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -34,7 +34,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
@@ -330,44 +329,6 @@ struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 val;
-	u32 led = 1 << smp_processor_id();
-
-	local_irq_save(flags);
-	val = readl(VA_LEDS_BASE);
-
-	switch (ledevt) {
-	case led_idle_start:
-		val = val & ~led;
-		break;
-
-	case led_idle_end:
-		val = val | led;
-		break;
-
-	case led_timer:
-		val = val ^ REALVIEW_SYS_LED7;
-		break;
-
-	case led_halted:
-		val = 0;
-		break;
-
-	default:
-		break;
-	}
-
-	writel(val, VA_LEDS_BASE);
-	local_irq_restore(flags);
-}
-#endif	/* CONFIG_LEDS */
-
 /*
  * Where is the timer (VA)?
  */
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index f8f2c0ac4c01..f2141ae5a7de 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
 #include <linux/io.h>
 
 #include <asm/setup.h>
-#include <asm/leds.h>
 
 #define APB_DEVICE(name, busid, base, plat)			\
 static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
@@ -47,7 +46,6 @@ extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
 extern void __iomem *timer3_va_base;
 
-extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index ce7747692c8b..d3b3cd216d64 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,7 +31,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
@@ -463,10 +462,6 @@ static void __init realview_eb_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e21711d72ee2..07d6672ddae7 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -33,7 +33,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
@@ -376,10 +375,6 @@ static void __init realview_pb1176_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b442fb276d57..ec4fcd9a7e9c 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
@@ -358,10 +357,6 @@ static void __init realview_pb11mp_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 1435cd863965..9992431b8a15 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -30,7 +30,6 @@
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
@@ -300,10 +299,6 @@ static void __init realview_pba8_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 5d2c8bebb069..17954a327e1b 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,7 +29,6 @@
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/smp_twd.h>
 #include <asm/pgtable.h>
@@ -395,10 +394,6 @@ static void __init realview_pbx_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 60b97ec01676..1aed9e70465d 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
-led-y := leds.o
 
 obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
 obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
-led-$(CONFIG_SA1100_ASSABET)		+= leds-assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
 
 obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-led-$(CONFIG_SA1100_BADGE4)		+= leds-badge4.o
 
 obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
 
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
 obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 
 obj-$(CONFIG_SA1100_LART)		+= lart.o
-led-$(CONFIG_SA1100_LART)		+= leds-lart.o
 
 obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
 obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
 
 obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
 
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
 # Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d673211f121c..1710ed1a0ac0 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
 
 #include <video/sa1100fb.h>
 
@@ -529,6 +531,89 @@ static void __init assabet_map_io(void)
 	sa1100_register_uart(2, 3);
 }
 
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct assabet_led {
+	struct led_classdev cdev;
+	u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} assabet_leds[] = {
+	{ "assabet:red", "cpu0",},
+	{ "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ *  - setting bit means turn off LED
+ *  - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct assabet_led *led = container_of(cdev,
+			struct assabet_led, cdev);
+
+	if (b != LED_OFF)
+		ASSABET_BCR_clear(led->mask);
+	else
+		ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+	struct assabet_led *led = container_of(cdev,
+			struct assabet_led, cdev);
+
+	return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_assabet())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+		struct assabet_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = assabet_leds[i].name;
+		led->cdev.brightness_set = assabet_led_set;
+		led->cdev.brightness_get = assabet_led_get;
+		led->cdev.default_trigger = assabet_leds[i].trigger;
+
+		if (!i)
+			led->mask = ASSABET_BCR_LED_RED;
+		else
+			led->mask = ASSABET_BCR_LED_GREEN;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
+#endif
 
 MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b30fb99b587c..038df4894b0f 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -76,8 +78,36 @@ static struct platform_device sa1111_device = {
 	.resource	= sa1111_resources,
 };
 
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+	{
+		.name			= "badge4:red",
+		.default_trigger	= "heartbeat",
+		.gpio			= 7,
+	},
+	{
+		.name			= "badge4:green",
+		.default_trigger	= "cpu0",
+		.gpio			= 9,
+	},
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+	.leds		= badge4_gpio_leds,
+	.num_leds	= ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &badge4_gpio_led_info,
+	}
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
+	&badge4_leds,
 };
 
 static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 09d7f4b4b354..5240f104a3cd 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
 #include <linux/irq.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -43,8 +45,48 @@ static struct platform_device cerfuart2_device = {
 	.resource	= cerfuart2_resources,
 };
 
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+	{
+		.name			= "cerf:d0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 0,
+	},
+	{
+		.name			= "cerf:d1",
+		.default_trigger	= "cpu0",
+		.gpio			= 1,
+	},
+	{
+		.name			= "cerf:d2",
+		.default_trigger	= "default-on",
+		.gpio			= 2,
+	},
+	{
+		.name			= "cerf:d3",
+		.default_trigger	= "default-on",
+		.gpio			= 3,
+	},
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+	.leds		= cerf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &cerf_gpio_led_info,
+	}
+};
+
+
 static struct platform_device *cerf_devices[] __initdata = {
 	&cerfuart2_device,
+	&cerf_leds,
 };
 
 #ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 7f86bd911826..fc106aab7c7e 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
 #include <linux/serial_core.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -183,9 +187,37 @@ static struct flash_platform_data hackkit_flash_data = {
 static struct resource hackkit_flash_resource =
 	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+	{
+		.name			= "hackkit:red",
+		.default_trigger	= "cpu0",
+		.gpio			= 22,
+	},
+	{
+		.name			= "hackkit:green",
+		.default_trigger	= "heartbeat",
+		.gpio			= 23,
+	},
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+	.leds		= hackkit_gpio_leds,
+	.num_leds	= ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &hackkit_gpio_led_info,
+	}
+};
+
 static void __init hackkit_init(void)
 {
 	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	platform_device_register(&hackkit_leds);
 }
 
 /**********************************************************************
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index b775a0abec0a..b2ce04bf4c9b 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
 
 #include <video/sa1100fb.h>
 
@@ -126,6 +129,27 @@ static struct map_desc lart_io_desc[] __initdata = {
 	}
 };
 
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+	{
+		.name			= "lart:red",
+		.default_trigger	= "cpu0",
+		.gpio			= 23,
+	},
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+	.leds		= lart_gpio_leds,
+	.num_leds	= ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &lart_gpio_led_info,
+	}
+};
 static void __init lart_map_io(void)
 {
 	sa1100_map_io();
@@ -139,6 +163,8 @@ static void __init lart_map_io(void)
 	GPDR |= GPIO_UART_TXD;
 	GPDR &= ~GPIO_UART_RXD;
 	PPAR |= PPAR_UPR;
+
+	platform_device_register(&lart_leds);
 }
 
 MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 3699176bca94..000000000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- *   - Green - toggles state every 50 timer interrupts
- *   - Red   - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK	(ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= ASSABET_BCR_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index f99fac3eedb6..000000000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED		GPIO_GPIO(7)
-#define LED_GREEN       GPIO_GPIO(9)
-#define LED_MASK	(LED_RED|LED_GREEN)
-
-#define LED_IDLE	LED_GREEN
-#define LED_TIMER	LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-		GPDR |= LED_MASK;
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_TIMER;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-		/* LED off when system is idle */
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_IDLE;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_IDLE;
-                break;
-#endif
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_RED;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_RED;
-                break;
-
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_GREEN;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_GREEN;
-                break;
-
-	default:
-		break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 30fc3b2bf555..000000000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0          GPIO_GPIO(0)
-#define LED_D1          GPIO_GPIO(1)
-#define LED_D2          GPIO_GPIO(2)
-#define LED_D3          GPIO_GPIO(3)
-#define LED_MASK        (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_D0;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-#endif
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D2;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D2;
-                break;
-
-        case led_amber_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D3;
-                break;
-
-        case led_amber_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D3;
-                break;
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-
-        default:
-                break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index f8e47235babe..000000000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN    GPIO_GPIO23
-#define LED_RED    GPIO_GPIO22
-#define LED_MASK  (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-		case led_start:
-			/* pin 22/23 are outputs */
-			GPDR |= LED_MASK;
-			hw_led_state = LED_MASK;
-			led_state = LED_STATE_ENABLED;
-			break;
-
-		case led_stop:
-			led_state &= ~LED_STATE_ENABLED;
-			break;
-
-		case led_claim:
-			led_state |= LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-		case led_release:
-			led_state &= ~LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-#ifdef CONFIG_LEDS_TIMER
-		case led_timer:
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state ^= LED_GREEN;
-			break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-		case led_idle_start:
-			/* The LART people like the LED to be off when the
-			   system is idle... */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_idle_end:
-			/* ... and on if the system is not idle */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state |= LED_RED;
-			break;
-#endif
-
-		case led_red_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_red_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_RED;
-			break;
-
-		case led_green_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_GREEN;
-			break;
-
-		case led_green_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_GREEN;
-			break;
-
-		default:
-			break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 50a5b143b460..000000000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- *   - GPIO23 is the LED, on if system is not idle
- *  You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- *  time, but in that case the timer events will still dictate the
- *  pace of the LED.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23    GPIO_GPIO23
-#define LED_MASK  (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:
-		/* pin 23 is output pin */
-		GPDR |= LED_23;
-		hw_led_state = LED_MASK;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= LED_23;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		/* The LART people like the LED to be off when the
-                   system is idle... */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_idle_end:
-		/* ... and on if the system is not idle */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= LED_23;
-		break;
-#endif
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= LED_23;
-		break;
-
-	default:
-		break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0f1053..000000000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
-	if (machine_is_assabet())
-		leds_event = assabet_leds_event;
-	if (machine_is_consus())
-		leds_event = consus_leds_event;
-	if (machine_is_badge4())
-		leds_event = badge4_leds_event;
-	if (machine_is_brutus())
-		leds_event = brutus_leds_event;
-	if (machine_is_cerf())
-		leds_event = cerf_leds_event;
-	if (machine_is_flexanet())
-		leds_event = flexanet_leds_event;
-	if (machine_is_graphicsclient())
-		leds_event = graphicsclient_leds_event;
-	if (machine_is_hackkit())
-		leds_event = hackkit_leds_event;
-	if (machine_is_lart())
-		leds_event = lart_leds_event;
-	if (machine_is_pfs168())
-		leds_event = pfs168_leds_event;
-	if (machine_is_graphicsmaster())
-		leds_event = graphicsmaster_leds_event;
-	if (machine_is_adsbitsy())
-		leds_event = adsbitsy_leds_event;
-	if (machine_is_pt_system3())
-		leds_event = system3_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b6020f550..000000000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b04e7ba..29657183c452 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= core.o dma.o irq.o pci.o
+obj-y			:= core.o dma.o irq.o pci.o leds.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index d35b94ef73b7..9ad2e9737fb5 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/leds.h>
 #include <asm/param.h>
 #include <asm/system_misc.h>
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 25609076921f..081c778a10ac 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,165 +1,117 @@
 /*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
  * DIGITAL Shark LED control routines.
  *
- * The leds use is as follows:
- *  - Green front - toggles state every 50 timer interrupts
- *  - Amber front - Unused, this is a dual color led (Amber/Green)
- *  - Amber back  - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
  *
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
 #include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
 
-#include <asm/leds.h>
+#include <asm/mach-types.h>
 
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct shark_led {
+	struct led_classdev cdev;
+	u8 mask;
+};
 
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} shark_leds[] = {
+	{ "shark:amber0", "default-on", },	/* Bit 5 */
+	{ "shark:green", "heartbeat", },	/* Bit 6 */
+	{ "shark:amber1", "cpu0" },		/* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+	outw(0x09, 0x24);
+	return inw(0x26);
+}
 
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+	outw(0x09, 0x24);
+	outw(value, 0x26);
+}
 
-static DEFINE_RAW_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct shark_led *led = container_of(cdev,
+						 struct shark_led, cdev);
+	u16 reg = led_reg_read();
 
-short sequoia_read(int addr) {
-  outw(addr,0x24);
-  return inw(0x26);
-}
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
 
-void sequoia_write(short value,short addr) {
-  outw(addr,0x24);
-  outw(value,0x26);
+	led_reg_write(reg);
 }
 
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
+	struct shark_led *led = container_of(cdev,
+						 struct shark_led, cdev);
+	u16 reg = led_reg_read();
 
-	hw_led_state = sequoia_read(0x09);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
 
-	switch (evt) {
-	case led_start:
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
-		hw_led_state |= SEQUOIA_LED_BACK;
-#else
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		saved_state = hw_led_state;
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = saved_state;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= SEQUOIA_LED_GREEN;
-		break;
-#endif
+static int __init shark_leds_init(void)
+{
+	int i;
+	u16 reg;
 
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
+	if (!machine_is_shark())
+		return -ENODEV;
 
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-#endif
+	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+		struct shark_led *led;
 
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
-
-	default:
-		break;
-	}
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
 
-	if  (led_state & LED_STATE_ENABLED)
-		sequoia_write(hw_led_state,0x09);
+		led->cdev.name = shark_leds[i].name;
+		led->cdev.brightness_set = shark_led_set;
+		led->cdev.brightness_get = shark_led_get;
+		led->cdev.default_trigger = shark_leds[i].trigger;
 
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-}
+		/* Count in 5 bits offset */
+		led->mask = BIT(i + 5);
 
-static int __init leds_init(void)
-{
-	extern void (*leds_event)(led_event_t);
-	short temp;
-	
-	leds_event = sequoia_leds_event;
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
 
 	/* Make LEDs independent of power-state */
-	request_region(0x24,4,"sequoia");
-	temp = sequoia_read(0x09);
-	temp |= 1<<10;
-	sequoia_write(temp,0x09);
-	leds_event(led_start);
+	request_region(0x24, 4, "led_reg");
+	reg = led_reg_read();
+	reg |= 1 << 10;
+	led_reg_write(reg);
+
 	return 0;
 }
 
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
+#endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index c8a7b951f759..cc9b5fd8c3d3 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -917,14 +917,10 @@ PERIPH_CLK(la,		"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX
 PERIPH_CLK(owr,		"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71);
 PERIPH_CLK(nor,		"nor",			NULL,	42,	0x1d0,	92000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* requires min voltage */
 PERIPH_CLK(mipi,	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* scales with voltage */
-PERIPH_CLK(i2c1,	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
-PERIPH_CLK(i2c2,	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
-PERIPH_CLK(i2c3,	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
-PERIPH_CLK(dvc,		"tegra-i2c.3",		NULL,	47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
-PERIPH_CLK(i2c1_i2c,	"tegra-i2c.0",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0);
-PERIPH_CLK(i2c2_i2c,	"tegra-i2c.1",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0);
-PERIPH_CLK(i2c3_i2c,	"tegra-i2c.2",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0);
-PERIPH_CLK(dvc_i2c,	"tegra-i2c.3",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0);
+PERIPH_CLK(i2c1,	"tegra-i2c.0",		"div-clk", 12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(i2c2,	"tegra-i2c.1",		"div-clk", 54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(i2c3,	"tegra-i2c.2",		"div-clk", 67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
+PERIPH_CLK(dvc,		"tegra-i2c.3",		"div-clk", 47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16);
 PERIPH_CLK(uarta,	"tegra-uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
 PERIPH_CLK(uartb,	"tegra-uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
 PERIPH_CLK(uartc,	"tegra-uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX);
@@ -989,10 +985,6 @@ static struct clk *tegra_list_clks[] = {
 	&tegra_i2c2,
 	&tegra_i2c3,
 	&tegra_dvc,
-	&tegra_i2c1_i2c,
-	&tegra_i2c2_i2c,
-	&tegra_i2c3_i2c,
-	&tegra_dvc_i2c,
 	&tegra_uarta,
 	&tegra_uartb,
 	&tegra_uartc,
@@ -1056,6 +1048,10 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
 	CLK_DUPLICATE("vde",	"tegra-aes",	"vde"),
 	CLK_DUPLICATE("cclk",	NULL,		"cpu"),
 	CLK_DUPLICATE("twd",	"smp_twd",	NULL),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
 };
 
 #define CLK(dev, con, ck)	\
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index c10449603df0..d92cb556ae35 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1071,11 +1071,11 @@ PERIPH_CLK(la,		"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX
 PERIPH_CLK(owr,		"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB);
 PERIPH_CLK(nor,		"nor",			NULL,	42,	0x1d0,	127000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71); /* requires min voltage */
 PERIPH_CLK(mipi,	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */
-PERIPH_CLK(i2c1,	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c2,	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c3,	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c4,	"tegra-i2c.3",		NULL,	103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c5,	"tegra-i2c.4",		NULL,	47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c1,	"tegra-i2c.0",		"div-clk", 12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c2,	"tegra-i2c.1",		"div-clk", 54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c3,	"tegra-i2c.2",		"div-clk", 67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c4,	"tegra-i2c.3",		"div-clk", 103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c5,	"tegra-i2c.4",		"div-clk", 47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB);
 PERIPH_CLK(uarta,	"tegra-uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
 PERIPH_CLK(uartb,	"tegra-uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
 PERIPH_CLK(uartc,	"tegra-uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
@@ -1287,6 +1287,11 @@ struct clk_duplicate tegra_clk_duplicates[] = {
 	CLK_DUPLICATE("dam1", NULL, "dam1"),
 	CLK_DUPLICATE("dam2", NULL, "dam2"),
 	CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+	CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"),
 };
 
 struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index ca7902c6ed18..5b5c1eeb5b5c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -37,7 +37,6 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/irq.h>
-#include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
 #include <asm/hardware/vic.h>
@@ -758,10 +757,6 @@ void __init versatile_init(void)
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-
-#ifdef CONFIG_LEDS
-	leds_event = versatile_leds_event;
-#endif
 }
 
 /*
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index d15a4a6d6146..ca83a7659aef 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -42,9 +42,8 @@ config OMAP_DEBUG_DEVICES
 	  For debug cards on TI reference boards.
 
 config OMAP_DEBUG_LEDS
-	bool
+	def_bool y if NEW_LEDS
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS_CLASS
 
 config POWER_AVS_OMAP
 	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 195aaae65872..ea29bbe8e5cf 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,280 +1,119 @@
 /*
  * linux/arch/arm/plat-omap/debug-leds.c
  *
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
  * Copyright 2003 by Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/gpio.h>
+
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include <plat/fpga.h>
 
-
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
  * debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t			lock;
-static struct h2p2_dbg_fpga __iomem	*fpga;
-static u16				led_state, hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api()	1
-#else
-#define new_led_api()	0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- *  - timer and idle leds (some boards use non-FPGA leds here);
- *  - up to 4 generic leds, easily accessed in-kernel (any context)
  */
 
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (fpga)
-			led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER,
-					led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	/* LED lit iff busy */
-	case led_idle_start:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
+static struct h2p2_dbg_fpga __iomem *fpga;
 
-	case led_idle_end:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- *  - with syfs access and generic triggering
- *  - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
 
 struct dbg_led {
 	struct led_classdev	cdev;
 	u16			mask;
 };
 
-static struct dbg_led dbg_leds[] = {
-	/* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
-	{ .mask = 1 << 0,  .cdev.name =  "d4:green",
-		.cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
-	{ .mask = 1 << 1,  .cdev.name =  "d5:green", },		/* !idle */
-#endif
-	{ .mask = 1 << 2,  .cdev.name =  "d6:green", },
-	{ .mask = 1 << 3,  .cdev.name =  "d7:green", },
-
-	{ .mask = 1 << 4,  .cdev.name =  "d8:green", },
-	{ .mask = 1 << 5,  .cdev.name =  "d9:green", },
-	{ .mask = 1 << 6,  .cdev.name = "d10:green", },
-	{ .mask = 1 << 7,  .cdev.name = "d11:green", },
-
-	{ .mask = 1 << 8,  .cdev.name = "d12:green", },
-	{ .mask = 1 << 9,  .cdev.name = "d13:green", },
-	{ .mask = 1 << 10, .cdev.name = "d14:green", },
-	{ .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef	CONFIG_LEDS
-	{ .mask = 1 << 12, .cdev.name = "d16:green", },
-	{ .mask = 1 << 13, .cdev.name = "d17:green", },
-	{ .mask = 1 << 14, .cdev.name = "d18:green", },
-	{ .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+	const char *name;
+	const char *trigger;
+} dbg_leds[] = {
+	{ "dbg:d4", "heartbeat", },
+	{ "dbg:d5", "cpu0", },
+	{ "dbg:d6", "default-on", },
+	{ "dbg:d7", },
+	{ "dbg:d8", },
+	{ "dbg:d9", },
+	{ "dbg:d10", },
+	{ "dbg:d11", },
+	{ "dbg:d12", },
+	{ "dbg:d13", },
+	{ "dbg:d14", },
+	{ "dbg:d15", },
+	{ "dbg:d16", },
+	{ "dbg:d17", },
+	{ "dbg:d18", },
+	{ "dbg:d19", },
 };
 
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	struct dbg_led	*led = container_of(cdev, struct dbg_led, cdev);
-	unsigned long	flags;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	spin_lock_irqsave(&lock, flags);
-	if (value == LED_OFF)
-		hw_led_state &= ~led->mask;
+	reg = __raw_readw(&fpga->leds);
+	if (b != LED_OFF)
+		reg |= led->mask;
 	else
-		hw_led_state |= led->mask;
-	__raw_writew(~hw_led_state, &fpga->leds);
-	spin_unlock_irqrestore(&lock, flags);
+		reg &= ~led->mask;
+	__raw_writew(reg, &fpga->leds);
 }
 
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
 {
-	unsigned	i;
-	struct dbg_led	*led;
-	int		status;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
-		led->cdev.brightness_set = fpga_led_set;
-		status = led_classdev_register(dev, &led->cdev);
-		if (status < 0)
-			break;
-	}
-	return;
+	reg = __raw_readw(&fpga->leds);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
 }
 
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
 {
 	struct resource	*iomem;
-
-	spin_lock_init(&lock);
+	int i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iomem)
 		return -ENODEV;
 
 	fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
-	__raw_writew(~0, &fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
+	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+		struct dbg_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
 
-#ifdef	CONFIG_LEDS
-	leds_event = h2p2_dbg_leds_event;
-	leds_event(led_start);
-#endif
+		led->cdev.name = dbg_leds[i].name;
+		led->cdev.brightness_set = dbg_led_set;
+		led->cdev.brightness_get = dbg_led_get;
+		led->cdev.default_trigger = dbg_leds[i].trigger;
+		led->mask = BIT(i);
 
-	if (new_led_api()) {
-		newled_init(&pdev->dev);
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
 	}
 
 	return 0;
@@ -282,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 
 static int fpga_suspend_noirq(struct device *dev)
 {
-	__raw_writew(~0, &fpga->leds);
+	fpga_led_state = __raw_readw(&fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
 	return 0;
 }
 
 static int fpga_resume_noirq(struct device *dev)
 {
-	__raw_writew(~hw_led_state, &fpga->leds);
+	__raw_writew(~fpga_led_state, &fpga->leds);
 	return 0;
 }
 
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 4dcb11c3d894..60552e22f22e 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -28,7 +28,6 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include <asm/irq.h>
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 8d5c10a5084d..2a4ae8a6a081 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -16,8 +16,10 @@ config PLAT_VERSATILE_FPGA_IRQ_NR
        depends on PLAT_VERSATILE_FPGA_IRQ
 
 config PLAT_VERSATILE_LEDS
-	def_bool y if LEDS_CLASS
+	def_bool y if NEW_LEDS
 	depends on ARCH_REALVIEW || ARCH_VERSATILE
+	select LEDS_CLASS
+	select LEDS_TRIGGER
 
 config PLAT_VERSATILE_SCHED_CLOCK
 	def_bool y
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa555ea6..d2490d00b46c 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
 } versatile_leds[] = {
 	{ "versatile:0", "heartbeat", },
 	{ "versatile:1", "mmc0", },
-	{ "versatile:2", },
-	{ "versatile:3", },
-	{ "versatile:4", },
-	{ "versatile:5", },
+	{ "versatile:2", "cpu0" },
+	{ "versatile:3", "cpu1" },
+	{ "versatile:4", "cpu2" },
+	{ "versatile:5", "cpu3" },
 	{ "versatile:6", },
 	{ "versatile:7", },
 };
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 36d3daa19a74..dbdefa3fe775 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -2,6 +2,8 @@ menu "Device Drivers"
 
 source "drivers/base/Kconfig"
 
+source "drivers/bus/Kconfig"
+
 source "drivers/connector/Kconfig"
 
 source "drivers/mtd/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 8c30e73cd94c..acb48fa4531c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -6,6 +6,7 @@
 #
 
 obj-y				+= irqchip/
+obj-y				+= bus/
 
 # GPIO must come after pinctrl as gpios may need to mux pins etc
 obj-y				+= pinctrl/
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
new file mode 100644
index 000000000000..bbec35d21fe5
--- /dev/null
+++ b/drivers/bus/Kconfig
@@ -0,0 +1,21 @@
+#
+# Bus Devices
+#
+
+menu "Bus devices"
+
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	help
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
+
+config OMAP_INTERCONNECT
+	tristate "OMAP INTERCONNECT DRIVER"
+	depends on ARCH_OMAP2PLUS
+
+	help
+	  Driver to enable OMAP interconnect error handling driver.
+endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
new file mode 100644
index 000000000000..45d997c85453
--- /dev/null
+++ b/drivers/bus/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the bus drivers.
+#
+
+obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+
+# Interconnect bus driver for OMAP SoCs.
+obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
new file mode 100644
index 000000000000..ff63560b8467
--- /dev/null
+++ b/drivers/bus/omap-ocp2scp.c
@@ -0,0 +1,88 @@
+/*
+ * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+static int ocp2scp_remove_devices(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
+{
+	int			ret;
+	struct device_node	*np = pdev->dev.of_node;
+
+	if (np) {
+		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+			goto err0;
+		}
+	}
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err0:
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return ret;
+}
+
+static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ocp2scp_id_table[] = {
+	{ .compatible = "ti,omap-ocp2scp" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
+#endif
+
+static struct platform_driver omap_ocp2scp_driver = {
+	.probe		= omap_ocp2scp_probe,
+	.remove		= __devexit_p(omap_ocp2scp_remove),
+	.driver		= {
+		.name	= "omap-ocp2scp",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_ocp2scp_id_table),
+	},
+};
+
+module_platform_driver(omap_ocp2scp_driver);
+
+MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP OCP2SCP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index f447e02102bb..44b2b3e57882 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -191,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
 			IRQF_DISABLED, "l3-dbg-irq", l3);
 	if (ret) {
 		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						9 + OMAP44XX_IRQ_GIC_START);
+						l3->debug_irq);
 		goto err3;
 	}
 
@@ -201,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
 			IRQF_DISABLED, "l3-app-irq", l3);
 	if (ret) {
 		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						10 + OMAP44XX_IRQ_GIC_START);
+						l3->app_irq);
 		goto err4;
 	}
 
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index a6ce34dc4814..a6ce34dc4814 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
index acc216491b8a..acc216491b8a 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/drivers/bus/omap_l3_smx.c
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/drivers/bus/omap_l3_smx.h
index 4f3cebca4179..4f3cebca4179 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/drivers/bus/omap_l3_smx.h
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index d45c3345b4af..a0e2f7d70355 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -30,7 +30,6 @@
 
 #include <asm/hardware/dec21285.h>
 #include <asm/io.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/uaccess.h>
 
@@ -179,9 +178,6 @@ static ssize_t flash_write(struct file *file, const char __user *buf,
 
 	written = 0;
 
-	leds_event(led_claim);
-	leds_event(led_green_on);
-
 	nBlock = (int) p >> 16;	//block # of 64K bytes
 
 	/*
@@ -258,11 +254,6 @@ static ssize_t flash_write(struct file *file, const char __user *buf,
 			printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
 	}
 
-	/*
-	 * restore reg on exit
-	 */
-	leds_event(led_release);
-
 	mutex_unlock(&nwflash_mutex);
 
 	return written;
@@ -334,11 +325,6 @@ static int erase_block(int nBlock)
 	int temp, temp1;
 
 	/*
-	 * orange LED == erase
-	 */
-	leds_event(led_amber_on);
-
-	/*
 	 * reset footbridge to the correct offset 0 (...0..3)
 	 */
 	*CSR_ROMWRITEREG = 0;
@@ -446,12 +432,6 @@ static int write_block(unsigned long p, const char __user *buf, int count)
 	unsigned long timeout;
 	unsigned long timeout1;
 
-	/*
-	 * red LED == write
-	 */
-	leds_event(led_amber_off);
-	leds_event(led_red_on);
-
 	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
 
 	/*
@@ -558,17 +538,9 @@ static int write_block(unsigned long p, const char __user *buf, int count)
 					       pWritePtr - FLASH_BASE);
 
 				/*
-				 * no LED == waiting
-				 */
-				leds_event(led_amber_off);
-				/*
 				 * wait couple ms
 				 */
 				msleep(10);
-				/*
-				 * red LED == write
-				 */
-				leds_event(led_red_on);
 
 				goto WriteRetry;
 			} else {
@@ -583,12 +555,6 @@ static int write_block(unsigned long p, const char __user *buf, int count)
 		}
 	}
 
-	/*
-	 * green LED == read/verify
-	 */
-	leds_event(led_amber_off);
-	leds_event(led_green_on);
-
 	msleep(10);
 
 	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 8af4b06e80f7..a006f0db15af 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2797,6 +2797,27 @@ static __init void exynos4_gpiolib_init(void)
 	int group = 0;
 	void __iomem *gpx_base;
 
+#ifdef CONFIG_PINCTRL_SAMSUNG
+		/*
+		 * This gpio driver includes support for device tree support and
+		 * there are platforms using it. In order to maintain
+		 * compatibility with those platforms, and to allow non-dt
+		 * Exynos4210 platforms to use this gpiolib support, a check
+		 * is added to find out if there is a active pin-controller
+		 * driver support available. If it is available, this gpiolib
+		 * support is ignored and the gpiolib support available in
+		 * pin-controller driver is used. This is a temporary check and
+		 * will go away when all of the Exynos4210 platforms have
+		 * switched to using device tree and the pin-ctrl driver.
+		 */
+		struct device_node *pctrl_np;
+		const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+		pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat);
+		if (pctrl_np)
+			if (of_device_is_available(pctrl_np))
+				return;
+#endif
+
 	/* gpio part1 */
 	gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
 	if (gpio_base1 == NULL) {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9a08c57bc936..f981ac4e6783 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/i2c-tegra.h>
 #include <linux/of_i2c.h>
+#include <linux/of_device.h>
 #include <linux/module.h>
 
 #include <asm/unaligned.h>
@@ -114,11 +115,21 @@ enum msg_end_type {
 };
 
 /**
+ * struct tegra_i2c_hw_feature : Different HW support on Tegra
+ * @has_continue_xfer_support: Continue transfer supports.
+ */
+
+struct tegra_i2c_hw_feature {
+	bool has_continue_xfer_support;
+};
+
+/**
  * struct tegra_i2c_dev	- per device i2c context
  * @dev: device reference for power management
+ * @hw: Tegra i2c hw feature.
  * @adapter: core i2c layer adapter information
- * @clk: clock reference for i2c controller
- * @i2c_clk: clock reference for i2c bus
+ * @div_clk: clock reference for div clock of i2c controller.
+ * @fast_clk: clock reference for fast clock of i2c controller.
  * @base: ioremapped registers cookie
  * @cont_id: i2c controller id, used for for packet header
  * @irq: irq number of transfer complete interrupt
@@ -133,9 +144,10 @@ enum msg_end_type {
  */
 struct tegra_i2c_dev {
 	struct device *dev;
+	const struct tegra_i2c_hw_feature *hw;
 	struct i2c_adapter adapter;
-	struct clk *clk;
-	struct clk *i2c_clk;
+	struct clk *div_clk;
+	struct clk *fast_clk;
 	void __iomem *base;
 	int cont_id;
 	int irq;
@@ -351,16 +363,40 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
 }
 
+static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
+{
+	int ret;
+	ret = clk_prepare_enable(i2c_dev->fast_clk);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev,
+			"Enabling fast clk failed, err %d\n", ret);
+		return ret;
+	}
+	ret = clk_prepare_enable(i2c_dev->div_clk);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev,
+			"Enabling div clk failed, err %d\n", ret);
+		clk_disable_unprepare(i2c_dev->fast_clk);
+	}
+	return ret;
+}
+
+static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
+{
+	clk_disable_unprepare(i2c_dev->div_clk);
+	clk_disable_unprepare(i2c_dev->fast_clk);
+}
+
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
 	u32 val;
 	int err = 0;
 
-	clk_prepare_enable(i2c_dev->clk);
+	tegra_i2c_clock_enable(i2c_dev);
 
-	tegra_periph_reset_assert(i2c_dev->clk);
+	tegra_periph_reset_assert(i2c_dev->div_clk);
 	udelay(2);
-	tegra_periph_reset_deassert(i2c_dev->clk);
+	tegra_periph_reset_deassert(i2c_dev->div_clk);
 
 	if (i2c_dev->is_dvc)
 		tegra_dvc_init(i2c_dev);
@@ -369,7 +405,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 		(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
 	i2c_writel(i2c_dev, val, I2C_CNFG);
 	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
-	clk_set_rate(i2c_dev->clk, i2c_dev->bus_clk_rate * 8);
+	clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * 8);
 
 	if (!i2c_dev->is_dvc) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
@@ -387,7 +423,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	if (tegra_i2c_flush_fifos(i2c_dev))
 		err = -ETIMEDOUT;
 
-	clk_disable_unprepare(i2c_dev->clk);
+	tegra_i2c_clock_disable(i2c_dev);
 
 	if (i2c_dev->irq_disabled) {
 		i2c_dev->irq_disabled = 0;
@@ -563,7 +599,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	if (i2c_dev->is_suspended)
 		return -EBUSY;
 
-	clk_prepare_enable(i2c_dev->clk);
+	tegra_i2c_clock_enable(i2c_dev);
 	for (i = 0; i < num; i++) {
 		enum msg_end_type end_type = MSG_END_STOP;
 		if (i < (num - 1)) {
@@ -576,14 +612,19 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 		if (ret)
 			break;
 	}
-	clk_disable_unprepare(i2c_dev->clk);
+	tegra_i2c_clock_disable(i2c_dev);
 	return ret ?: i;
 }
 
 static u32 tegra_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
-		I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u32 ret = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+				I2C_FUNC_PROTOCOL_MANGLING;
+
+	if (i2c_dev->hw->has_continue_xfer_support)
+		ret |= I2C_FUNC_NOSTART;
+	return ret;
 }
 
 static const struct i2c_algorithm tegra_i2c_algo = {
@@ -591,13 +632,32 @@ static const struct i2c_algorithm tegra_i2c_algo = {
 	.functionality	= tegra_i2c_func,
 };
 
+static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
+	.has_continue_xfer_support = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
+	.has_continue_xfer_support = true,
+};
+
+#if defined(CONFIG_OF)
+/* Match table for of_platform binding */
+static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c-dvc", .data = &tegra20_i2c_hw, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+#endif
+
 static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 {
 	struct tegra_i2c_dev *i2c_dev;
 	struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *res;
-	struct clk *clk;
-	struct clk *i2c_clk;
+	struct clk *div_clk;
+	struct clk *fast_clk;
 	const unsigned int *prop;
 	void __iomem *base;
 	int irq;
@@ -622,16 +682,16 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 	}
 	irq = res->start;
 
-	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
+	div_clk = devm_clk_get(&pdev->dev, "div-clk");
+	if (IS_ERR(div_clk)) {
 		dev_err(&pdev->dev, "missing controller clock");
-		return PTR_ERR(clk);
+		return PTR_ERR(div_clk);
 	}
 
-	i2c_clk = devm_clk_get(&pdev->dev, "i2c");
-	if (IS_ERR(i2c_clk)) {
+	fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
+	if (IS_ERR(fast_clk)) {
 		dev_err(&pdev->dev, "missing bus clock");
-		return PTR_ERR(i2c_clk);
+		return PTR_ERR(fast_clk);
 	}
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
@@ -641,8 +701,8 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 	}
 
 	i2c_dev->base = base;
-	i2c_dev->clk = clk;
-	i2c_dev->i2c_clk = i2c_clk;
+	i2c_dev->div_clk = div_clk;
+	i2c_dev->fast_clk = fast_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->irq = irq;
 	i2c_dev->cont_id = pdev->id;
@@ -659,11 +719,18 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 			i2c_dev->bus_clk_rate = be32_to_cpup(prop);
 	}
 
-	if (pdev->dev.of_node)
+	i2c_dev->hw = &tegra20_i2c_hw;
+
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_device(of_match_ptr(tegra_i2c_of_match),
+						&pdev->dev);
+		i2c_dev->hw = match->data;
 		i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
 						"nvidia,tegra20-i2c-dvc");
-	else if (pdev->id == 3)
+	} else if (pdev->id == 3) {
 		i2c_dev->is_dvc = 1;
+	}
 	init_completion(&i2c_dev->msg_complete);
 
 	platform_set_drvdata(pdev, i2c_dev);
@@ -681,8 +748,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk_prepare_enable(i2c_dev->i2c_clk);
-
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
 	i2c_dev->adapter.owner = THIS_MODULE;
 	i2c_dev->adapter.class = I2C_CLASS_HWMON;
@@ -696,7 +761,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add I2C adapter\n");
-		clk_disable_unprepare(i2c_dev->i2c_clk);
 		return ret;
 	}
 
@@ -751,16 +815,6 @@ static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
 #define TEGRA_I2C_PM	NULL
 #endif
 
-#if defined(CONFIG_OF)
-/* Match table for of_platform binding */
-static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
-	{ .compatible = "nvidia,tegra20-i2c", },
-	{ .compatible = "nvidia,tegra20-i2c-dvc", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
-#endif
-
 static struct platform_driver tegra_i2c_driver = {
 	.probe   = tegra_i2c_probe,
 	.remove  = __devexit_p(tegra_i2c_remove),
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c96bbaadeebd..16578d3b52bb 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -506,6 +506,16 @@ config LEDS_TRIGGER_BACKLIGHT
 
 	  If unsure, say N.
 
+config LEDS_TRIGGER_CPU
+	bool "LED CPU Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by active CPUs. This shows
+	  the active CPUs across an array of LEDs so you can see which
+	  CPUs are active on the system at any given moment.
+
+	  If unsure, say N.
+
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
 	depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a4429a9217bc..a9b627c4f8ba 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -61,5 +61,6 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
 obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
 obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
 obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
 obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
 obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
new file mode 100644
index 000000000000..b312056da14d
--- /dev/null
+++ b/drivers/leds/ledtrig-cpu.c
@@ -0,0 +1,163 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for each possible CPU and named as
+ * cpu0, cpu1, cpu2, cpu3, etc.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include "leds.h"
+
+#define MAX_NAME_LEN	8
+
+struct led_trigger_cpu {
+	char name[MAX_NAME_LEN];
+	struct led_trigger *_trig;
+	struct mutex lock;
+	int lock_is_inited;
+};
+
+static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
+
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @evt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * binded LED to turn on or turn off.
+ */
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+	struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig);
+
+	/* mutex lock should be initialized before calling mutex_call() */
+	if (!trig->lock_is_inited)
+		return;
+
+	mutex_lock(&trig->lock);
+
+	/* Locate the correct CPU LED */
+	switch (ledevt) {
+	case CPU_LED_IDLE_END:
+	case CPU_LED_START:
+		/* Will turn the LED on, max brightness */
+		led_trigger_event(trig->_trig, LED_FULL);
+		break;
+
+	case CPU_LED_IDLE_START:
+	case CPU_LED_STOP:
+	case CPU_LED_HALTED:
+		/* Will turn the LED off */
+		led_trigger_event(trig->_trig, LED_OFF);
+		break;
+
+	default:
+		/* Will leave the LED as it is */
+		break;
+	}
+
+	mutex_unlock(&trig->lock);
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+	ledtrig_cpu(CPU_LED_STOP);
+	return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+	ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+	ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+	.shutdown	= ledtrig_cpu_syscore_shutdown,
+	.suspend	= ledtrig_cpu_syscore_suspend,
+	.resume		= ledtrig_cpu_syscore_resume,
+};
+
+static int __init ledtrig_cpu_init(void)
+{
+	int cpu;
+
+	/* Supports up to 9999 cpu cores */
+	BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+	/*
+	 * Registering CPU led trigger for each CPU core here
+	 * ignores CPU hotplug, but after this CPU hotplug works
+	 * fine with this trigger.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+		mutex_init(&trig->lock);
+
+		snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
+
+		mutex_lock(&trig->lock);
+		led_trigger_register_simple(trig->name, &trig->_trig);
+		trig->lock_is_inited = 1;
+		mutex_unlock(&trig->lock);
+	}
+
+	register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+	pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+	return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+		mutex_lock(&trig->lock);
+
+		led_trigger_unregister_simple(trig->_trig);
+		trig->_trig = NULL;
+		memset(trig->name, 0, MAX_NAME_LEN);
+		trig->lock_is_inited = 0;
+
+		mutex_unlock(&trig->lock);
+		mutex_destroy(&trig->lock);
+	}
+
+	unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8ca417614c57..598cd0a3adee 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -406,46 +406,6 @@ config MTD_NAND_ATMEL
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 and AVR32 processors.
-choice
-	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
-	depends on MTD_NAND_ATMEL
-
-config MTD_NAND_ATMEL_ECC_HW
-	bool "Hardware ECC"
-	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
-	help
-	  Use hardware ECC instead of software ECC when the chip
-	  supports it.
-
-	  The hardware ECC controller is capable of single bit error
-	  correction and 2-bit random detection per page.
-
-	  NB : hardware and software ECC schemes are incompatible.
-	  If you switch from one to another, you'll have to erase your
-	  mtd partition.
-
-	  If unsure, say Y
-
-config MTD_NAND_ATMEL_ECC_SOFT
-	bool "Software ECC"
-	help
-	  Use software ECC.
-
-	  NB : hardware and software ECC schemes are incompatible.
-	  If you switch from one to another, you'll have to erase your
-	  mtd partition.
-
-config MTD_NAND_ATMEL_ECC_NONE
-	bool "No ECC (testing only, DANGEROUS)"
-	depends on DEBUG_KERNEL
-	help
-	  No ECC will be used.
-	  It's not a good idea and it should be reserved for testing
-	  purpose only.
-
-	  If unsure, say N
-
-endchoice
 
 config MTD_NAND_PXA3xx
 	tristate "Support for NAND flash devices on PXA3xx"
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588bef62..34e94c7f68ca 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -145,6 +145,15 @@ config PINCTRL_COH901
 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 	  ports of 8 GPIO pins each.
 
+config PINCTRL_SAMSUNG
+	bool "Samsung pinctrl driver"
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_EXYNOS4
+	bool "Pinctrl driver data for Exynos4 SoC"
+	select PINCTRL_SAMSUNG
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f81ff2c..6a88113e11d9 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -29,5 +29,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
+obj-$(CONFIG_PINCTRL_EXYNOS4)	+= pinctrl-exynos.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
new file mode 100644
index 000000000000..21362f48d370
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -0,0 +1,579 @@
+/*
+ * Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ *		http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the Samsung Exynos specific information required by the
+ * the Samsung pinctrl/gpiolib driver. It also includes the implementation of
+ * external gpio and wakeup interrupt support.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+#include "pinctrl-exynos.h"
+
+/* list of external wakeup controllers supported */
+static const struct of_device_id exynos_wkup_irq_ids[] = {
+	{ .compatible = "samsung,exynos4210-wakeup-eint", },
+};
+
+static void exynos_gpio_irq_unmask(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+	unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + reg_mask);
+	mask &= ~(1 << edata->pin);
+	writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_mask(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+	unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+	unsigned long mask;
+
+	mask = readl(d->virt_base + reg_mask);
+	mask |= 1 << edata->pin;
+	writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_ack(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+	unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
+
+	writel(1 << edata->pin, d->virt_base + reg_pend);
+}
+
+static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+	struct samsung_pin_ctrl *ctrl = d->ctrl;
+	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+	struct samsung_pin_bank *bank = edata->bank;
+	unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
+	unsigned int con, trig_type;
+	unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
+	unsigned int mask;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		trig_type = EXYNOS_EINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trig_type = EXYNOS_EINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		trig_type = EXYNOS_EINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trig_type = EXYNOS_EINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trig_type = EXYNOS_EINT_LEVEL_LOW;
+		break;
+	default:
+		pr_err("unsupported external interrupt type\n");
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(irqd->irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+	con = readl(d->virt_base + reg_con);
+	con &= ~(EXYNOS_EINT_CON_MASK << shift);
+	con |= trig_type << shift;
+	writel(con, d->virt_base + reg_con);
+
+	reg_con = bank->pctl_offset;
+	shift = edata->pin * bank->func_width;
+	mask = (1 << bank->func_width) - 1;
+
+	con = readl(d->virt_base + reg_con);
+	con &= ~(mask << shift);
+	con |= EXYNOS_EINT_FUNC << shift;
+	writel(con, d->virt_base + reg_con);
+
+	return 0;
+}
+
+/*
+ * irq_chip for gpio interrupts.
+ */
+static struct irq_chip exynos_gpio_irq_chip = {
+	.name		= "exynos_gpio_irq_chip",
+	.irq_unmask	= exynos_gpio_irq_unmask,
+	.irq_mask	= exynos_gpio_irq_mask,
+	.irq_ack		= exynos_gpio_irq_ack,
+	.irq_set_type	= exynos_gpio_irq_set_type,
+};
+
+/*
+ * given a controller-local external gpio interrupt number, prepare the handler
+ * data for it.
+ */
+static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
+				struct samsung_pinctrl_drv_data *d)
+{
+	struct samsung_pin_bank *bank = d->ctrl->pin_banks;
+	struct exynos_geint_data *eint_data;
+	unsigned int nr_banks = d->ctrl->nr_banks, idx;
+	unsigned int irq_base = 0, eint_offset = 0;
+
+	if (hw >= d->ctrl->nr_gint) {
+		dev_err(d->dev, "unsupported ext-gpio interrupt\n");
+		return NULL;
+	}
+
+	for (idx = 0; idx < nr_banks; idx++, bank++) {
+		if (bank->eint_type != EINT_TYPE_GPIO)
+			continue;
+		if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
+			break;
+		irq_base += bank->nr_pins;
+		eint_offset += 4;
+	}
+
+	if (idx == nr_banks) {
+		dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
+		return NULL;
+	}
+
+	eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
+	if (!eint_data) {
+		dev_err(d->dev, "no memory for eint-gpio data\n");
+		return NULL;
+	}
+
+	eint_data->bank	= bank;
+	eint_data->pin = hw - irq_base;
+	eint_data->eint_offset = eint_offset;
+	return eint_data;
+}
+
+static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	struct samsung_pinctrl_drv_data *d = h->host_data;
+	struct exynos_geint_data *eint_data;
+
+	eint_data = exynos_get_eint_data(hw, d);
+	if (!eint_data)
+		return -EINVAL;
+
+	irq_set_handler_data(virq, eint_data);
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
+					handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
+{
+	struct samsung_pinctrl_drv_data *d = h->host_data;
+	struct exynos_geint_data *eint_data;
+
+	eint_data = irq_get_handler_data(virq);
+	devm_kfree(d->dev, eint_data);
+}
+
+/*
+ * irq domain callbacks for external gpio interrupt controller.
+ */
+static const struct irq_domain_ops exynos_gpio_irqd_ops = {
+	.map	= exynos_gpio_irq_map,
+	.unmap	= exynos_gpio_irq_unmap,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
+{
+	struct samsung_pinctrl_drv_data *d = data;
+	struct samsung_pin_ctrl *ctrl = d->ctrl;
+	struct samsung_pin_bank *bank = ctrl->pin_banks;
+	unsigned int svc, group, pin, virq;
+
+	svc = readl(d->virt_base + ctrl->svc);
+	group = EXYNOS_SVC_GROUP(svc);
+	pin = svc & EXYNOS_SVC_NUM_MASK;
+
+	if (!group)
+		return IRQ_HANDLED;
+	bank += (group - 1);
+
+	virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
+	if (!virq)
+		return IRQ_NONE;
+	generic_handle_irq(virq);
+	return IRQ_HANDLED;
+}
+
+/*
+ * exynos_eint_gpio_init() - setup handling of external gpio interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
+{
+	struct device *dev = d->dev;
+	unsigned int ret;
+
+	if (!d->irq) {
+		dev_err(dev, "irq number not available\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
+					0, dev_name(dev), d);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		return -ENXIO;
+	}
+
+	d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
+				&exynos_gpio_irqd_ops, d);
+	if (!d->gpio_irqd) {
+		dev_err(dev, "gpio irq domain allocation failed\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void exynos_wkup_irq_unmask(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+	unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+	unsigned long mask;
+
+	mask = readl(d->virt_base + reg_mask);
+	mask &= ~(1 << pin);
+	writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_mask(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+	unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+	unsigned long mask;
+
+	mask = readl(d->virt_base + reg_mask);
+	mask |= 1 << pin;
+	writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_ack(struct irq_data *irqd)
+{
+	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+	unsigned long pend = d->ctrl->weint_pend + (bank << 2);
+
+	writel(1 << pin, d->virt_base + pend);
+}
+
+static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+	unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
+	unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
+	unsigned long con, trig_type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		trig_type = EXYNOS_EINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trig_type = EXYNOS_EINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		trig_type = EXYNOS_EINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trig_type = EXYNOS_EINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trig_type = EXYNOS_EINT_LEVEL_LOW;
+		break;
+	default:
+		pr_err("unsupported external interrupt type\n");
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(irqd->irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+	con = readl(d->virt_base + reg_con);
+	con &= ~(EXYNOS_EINT_CON_MASK << shift);
+	con |= trig_type << shift;
+	writel(con, d->virt_base + reg_con);
+	return 0;
+}
+
+/*
+ * irq_chip for wakeup interrupts
+ */
+static struct irq_chip exynos_wkup_irq_chip = {
+	.name	= "exynos_wkup_irq_chip",
+	.irq_unmask	= exynos_wkup_irq_unmask,
+	.irq_mask	= exynos_wkup_irq_mask,
+	.irq_ack	= exynos_wkup_irq_ack,
+	.irq_set_type	= exynos_wkup_irq_set_type,
+};
+
+/* interrupt handler for wakeup interrupts 0..15 */
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	int eint_irq;
+
+	chained_irq_enter(chip, desc);
+	chip->irq_mask(&desc->irq_data);
+
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
+
+	eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
+	generic_handle_irq(eint_irq);
+	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
+}
+
+static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
+					struct irq_domain *domain)
+{
+	unsigned int irq;
+
+	while (pend) {
+		irq = fls(pend) - 1;
+		generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
+		pend &= ~(1 << irq);
+	}
+}
+
+/* interrupt handler for wakeup interrupt 16 */
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+	struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
+	unsigned long pend;
+	unsigned long mask;
+
+	chained_irq_enter(chip, desc);
+	pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
+	mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
+	exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
+	pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
+	mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
+	exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
+	chained_irq_exit(chip, desc);
+}
+
+static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
+					irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
+	irq_set_chip_data(virq, h->host_data);
+	set_irq_flags(virq, IRQF_VALID);
+	return 0;
+}
+
+/*
+ * irq domain callbacks for external wakeup interrupt controller.
+ */
+static const struct irq_domain_ops exynos_wkup_irqd_ops = {
+	.map	= exynos_wkup_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+/*
+ * exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
+{
+	struct device *dev = d->dev;
+	struct device_node *wkup_np = NULL;
+	struct device_node *np;
+	struct exynos_weint_data *weint_data;
+	int idx, irq;
+
+	for_each_child_of_node(dev->of_node, np) {
+		if (of_match_node(exynos_wkup_irq_ids, np)) {
+			wkup_np = np;
+			break;
+		}
+	}
+	if (!wkup_np)
+		return -ENODEV;
+
+	d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
+				&exynos_wkup_irqd_ops, d);
+	if (!d->wkup_irqd) {
+		dev_err(dev, "wakeup irq domain allocation failed\n");
+		return -ENXIO;
+	}
+
+	weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
+	if (!weint_data) {
+		dev_err(dev, "could not allocate memory for weint_data\n");
+		return -ENOMEM;
+	}
+
+	irq = irq_of_parse_and_map(wkup_np, 16);
+	if (irq) {
+		weint_data[16].domain = d->wkup_irqd;
+		irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
+		irq_set_handler_data(irq, &weint_data[16]);
+	} else {
+		dev_err(dev, "irq number for EINT16-32 not found\n");
+	}
+
+	for (idx = 0; idx < 16; idx++) {
+		weint_data[idx].domain = d->wkup_irqd;
+		weint_data[idx].irq = idx;
+
+		irq = irq_of_parse_and_map(wkup_np, idx);
+		if (irq) {
+			irq_set_handler_data(irq, &weint_data[idx]);
+			irq_set_chained_handler(irq, exynos_irq_eint0_15);
+		} else {
+			dev_err(dev, "irq number for eint-%x not found\n", idx);
+		}
+	}
+	return 0;
+}
+
+/* pin banks of exynos4210 pin-controller 0 */
+static struct samsung_pin_bank exynos4210_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
+	EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
+	EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
+	EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
+	EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
+	EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
+	EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
+	EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
+	EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
+	EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
+	EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
+	EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
+	EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
+	EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
+	EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
+	EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
+};
+
+/* pin banks of exynos4210 pin-controller 1 */
+static struct samsung_pin_bank exynos4210_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
+	EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
+	EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
+	EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
+	EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
+	EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
+	EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
+	EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
+	EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
+	EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
+	EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
+	EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
+	EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
+	EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
+};
+
+/* pin banks of exynos4210 pin-controller 2 */
+static struct samsung_pin_bank exynos4210_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
+ * three gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos4210_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks0),
+		.base		= EXYNOS4210_GPIO_A0_START,
+		.nr_pins	= EXYNOS4210_GPIOA_NR_PINS,
+		.nr_gint	= EXYNOS4210_GPIOA_NR_GINT,
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos4210-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos4210_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks1),
+		.base		= EXYNOS4210_GPIOA_NR_PINS,
+		.nr_pins	= EXYNOS4210_GPIOB_NR_PINS,
+		.nr_gint	= EXYNOS4210_GPIOB_NR_GINT,
+		.nr_wint	= 32,
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.label		= "exynos4210-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos4210_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks2),
+		.base		= EXYNOS4210_GPIOA_NR_PINS +
+					EXYNOS4210_GPIOB_NR_PINS,
+		.nr_pins	= EXYNOS4210_GPIOC_NR_PINS,
+		.label		= "exynos4210-gpio-ctrl2",
+	},
+};
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
new file mode 100644
index 000000000000..31d0a06174e4
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -0,0 +1,218 @@
+/*
+ * Exynos specific definitions for Samsung pinctrl and gpiolib driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ *		http://www.linaro.org
+ *
+ * This file contains the Exynos specific definitions for the Samsung
+ * pinctrl/gpiolib interface drivers.
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define EXYNOS_GPIO_START(__gpio)	((__gpio##_START) + (__gpio##_NR))
+
+#define EXYNOS4210_GPIO_A0_NR	(8)
+#define EXYNOS4210_GPIO_A1_NR	(6)
+#define EXYNOS4210_GPIO_B_NR	(8)
+#define EXYNOS4210_GPIO_C0_NR	(5)
+#define EXYNOS4210_GPIO_C1_NR	(5)
+#define EXYNOS4210_GPIO_D0_NR	(4)
+#define EXYNOS4210_GPIO_D1_NR	(4)
+#define EXYNOS4210_GPIO_E0_NR	(5)
+#define EXYNOS4210_GPIO_E1_NR	(8)
+#define EXYNOS4210_GPIO_E2_NR	(6)
+#define EXYNOS4210_GPIO_E3_NR	(8)
+#define EXYNOS4210_GPIO_E4_NR	(8)
+#define EXYNOS4210_GPIO_F0_NR	(8)
+#define EXYNOS4210_GPIO_F1_NR	(8)
+#define EXYNOS4210_GPIO_F2_NR	(8)
+#define EXYNOS4210_GPIO_F3_NR	(6)
+#define EXYNOS4210_GPIO_J0_NR	(8)
+#define EXYNOS4210_GPIO_J1_NR	(5)
+#define EXYNOS4210_GPIO_K0_NR	(7)
+#define EXYNOS4210_GPIO_K1_NR	(7)
+#define EXYNOS4210_GPIO_K2_NR	(7)
+#define EXYNOS4210_GPIO_K3_NR	(7)
+#define EXYNOS4210_GPIO_L0_NR	(8)
+#define EXYNOS4210_GPIO_L1_NR	(3)
+#define EXYNOS4210_GPIO_L2_NR	(8)
+#define EXYNOS4210_GPIO_Y0_NR	(6)
+#define EXYNOS4210_GPIO_Y1_NR	(4)
+#define EXYNOS4210_GPIO_Y2_NR	(6)
+#define EXYNOS4210_GPIO_Y3_NR	(8)
+#define EXYNOS4210_GPIO_Y4_NR	(8)
+#define EXYNOS4210_GPIO_Y5_NR	(8)
+#define EXYNOS4210_GPIO_Y6_NR	(8)
+#define EXYNOS4210_GPIO_X0_NR	(8)
+#define EXYNOS4210_GPIO_X1_NR	(8)
+#define EXYNOS4210_GPIO_X2_NR	(8)
+#define EXYNOS4210_GPIO_X3_NR	(8)
+#define EXYNOS4210_GPIO_Z_NR	(7)
+
+enum exynos4210_gpio_xa_start {
+	EXYNOS4210_GPIO_A0_START	= 0,
+	EXYNOS4210_GPIO_A1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
+	EXYNOS4210_GPIO_B_START		= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
+	EXYNOS4210_GPIO_C0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
+	EXYNOS4210_GPIO_C1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
+	EXYNOS4210_GPIO_D0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
+	EXYNOS4210_GPIO_D1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
+	EXYNOS4210_GPIO_E0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
+	EXYNOS4210_GPIO_E1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
+	EXYNOS4210_GPIO_E2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
+	EXYNOS4210_GPIO_E3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
+	EXYNOS4210_GPIO_E4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
+	EXYNOS4210_GPIO_F0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
+	EXYNOS4210_GPIO_F1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
+	EXYNOS4210_GPIO_F2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
+	EXYNOS4210_GPIO_F3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
+};
+
+enum exynos4210_gpio_xb_start {
+	EXYNOS4210_GPIO_J0_START	= 0,
+	EXYNOS4210_GPIO_J1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
+	EXYNOS4210_GPIO_K0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
+	EXYNOS4210_GPIO_K1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
+	EXYNOS4210_GPIO_K2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
+	EXYNOS4210_GPIO_K3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
+	EXYNOS4210_GPIO_L0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
+	EXYNOS4210_GPIO_L1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
+	EXYNOS4210_GPIO_L2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
+	EXYNOS4210_GPIO_Y0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
+	EXYNOS4210_GPIO_Y1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
+	EXYNOS4210_GPIO_Y2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
+	EXYNOS4210_GPIO_Y3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
+	EXYNOS4210_GPIO_Y4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
+	EXYNOS4210_GPIO_Y5_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
+	EXYNOS4210_GPIO_Y6_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
+	EXYNOS4210_GPIO_X0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
+	EXYNOS4210_GPIO_X1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
+	EXYNOS4210_GPIO_X2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
+	EXYNOS4210_GPIO_X3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
+};
+
+enum exynos4210_gpio_xc_start {
+	EXYNOS4210_GPIO_Z_START		= 0,
+};
+
+#define	EXYNOS4210_GPIO_A0_IRQ		EXYNOS4210_GPIO_A0_START
+#define	EXYNOS4210_GPIO_A1_IRQ		EXYNOS4210_GPIO_A1_START
+#define	EXYNOS4210_GPIO_B_IRQ		EXYNOS4210_GPIO_B_START
+#define	EXYNOS4210_GPIO_C0_IRQ		EXYNOS4210_GPIO_C0_START
+#define	EXYNOS4210_GPIO_C1_IRQ		EXYNOS4210_GPIO_C1_START
+#define	EXYNOS4210_GPIO_D0_IRQ		EXYNOS4210_GPIO_D0_START
+#define	EXYNOS4210_GPIO_D1_IRQ		EXYNOS4210_GPIO_D1_START
+#define	EXYNOS4210_GPIO_E0_IRQ		EXYNOS4210_GPIO_E0_START
+#define	EXYNOS4210_GPIO_E1_IRQ		EXYNOS4210_GPIO_E1_START
+#define	EXYNOS4210_GPIO_E2_IRQ		EXYNOS4210_GPIO_E2_START
+#define	EXYNOS4210_GPIO_E3_IRQ		EXYNOS4210_GPIO_E3_START
+#define	EXYNOS4210_GPIO_E4_IRQ		EXYNOS4210_GPIO_E4_START
+#define	EXYNOS4210_GPIO_F0_IRQ		EXYNOS4210_GPIO_F0_START
+#define	EXYNOS4210_GPIO_F1_IRQ		EXYNOS4210_GPIO_F1_START
+#define	EXYNOS4210_GPIO_F2_IRQ		EXYNOS4210_GPIO_F2_START
+#define	EXYNOS4210_GPIO_F3_IRQ		EXYNOS4210_GPIO_F3_START
+#define	EXYNOS4210_GPIO_J0_IRQ		EXYNOS4210_GPIO_J0_START
+#define	EXYNOS4210_GPIO_J1_IRQ		EXYNOS4210_GPIO_J1_START
+#define	EXYNOS4210_GPIO_K0_IRQ		EXYNOS4210_GPIO_K0_START
+#define	EXYNOS4210_GPIO_K1_IRQ		EXYNOS4210_GPIO_K1_START
+#define	EXYNOS4210_GPIO_K2_IRQ		EXYNOS4210_GPIO_K2_START
+#define	EXYNOS4210_GPIO_K3_IRQ		EXYNOS4210_GPIO_K3_START
+#define	EXYNOS4210_GPIO_L0_IRQ		EXYNOS4210_GPIO_L0_START
+#define	EXYNOS4210_GPIO_L1_IRQ		EXYNOS4210_GPIO_L1_START
+#define	EXYNOS4210_GPIO_L2_IRQ		EXYNOS4210_GPIO_L2_START
+#define	EXYNOS4210_GPIO_Z_IRQ		EXYNOS4210_GPIO_Z_START
+
+#define EXYNOS4210_GPIOA_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOA_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOB_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
+#define EXYNOS4210_GPIOB_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
+#define EXYNOS4210_GPIOC_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
+
+/* External GPIO and wakeup interrupt related definitions */
+#define EXYNOS_GPIO_ECON_OFFSET		0x700
+#define EXYNOS_GPIO_EMASK_OFFSET	0x900
+#define EXYNOS_GPIO_EPEND_OFFSET	0xA00
+#define EXYNOS_WKUP_ECON_OFFSET		0xE00
+#define EXYNOS_WKUP_EMASK_OFFSET	0xF00
+#define EXYNOS_WKUP_EPEND_OFFSET	0xF40
+#define EXYNOS_SVC_OFFSET		0xB08
+#define EXYNOS_EINT_FUNC		0xF
+
+/* helpers to access interrupt service register */
+#define EXYNOS_SVC_GROUP_SHIFT		3
+#define EXYNOS_SVC_GROUP_MASK		0x1f
+#define EXYNOS_SVC_NUM_MASK		7
+#define EXYNOS_SVC_GROUP(x)		((x >> EXYNOS_SVC_GROUP_SHIFT) & \
+						EXYNOS_SVC_GROUP_MASK)
+
+/* Exynos specific external interrupt trigger types */
+#define EXYNOS_EINT_LEVEL_LOW		0
+#define EXYNOS_EINT_LEVEL_HIGH		1
+#define EXYNOS_EINT_EDGE_FALLING	2
+#define EXYNOS_EINT_EDGE_RISING		3
+#define EXYNOS_EINT_EDGE_BOTH		4
+#define EXYNOS_EINT_CON_MASK		0xF
+#define EXYNOS_EINT_CON_LEN		4
+
+#define EXYNOS_EINT_MAX_PER_BANK	8
+#define EXYNOS_EINT_NR_WKUP_EINT
+
+#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id)		\
+	{						\
+		.pctl_offset	= reg,			\
+		.pin_base	= (__gpio##_START),	\
+		.nr_pins	= (__gpio##_NR),	\
+		.func_width	= 4,			\
+		.pud_width	= 2,			\
+		.drv_width	= 2,			\
+		.conpdn_width	= 2,			\
+		.pudpdn_width	= 2,			\
+		.eint_type	= EINT_TYPE_NONE,	\
+		.name		= id			\
+	}
+
+#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id)		\
+	{						\
+		.pctl_offset	= reg,			\
+		.pin_base	= (__gpio##_START),	\
+		.nr_pins	= (__gpio##_NR),	\
+		.func_width	= 4,			\
+		.pud_width	= 2,			\
+		.drv_width	= 2,			\
+		.conpdn_width	= 2,			\
+		.pudpdn_width	= 2,			\
+		.eint_type	= EINT_TYPE_GPIO,	\
+		.irq_base	= (__gpio##_IRQ),	\
+		.name		= id			\
+	}
+
+/**
+ * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
+ * @bank: pin bank from which this gpio interrupt originates.
+ * @pin: pin number within the bank.
+ * @eint_offset: offset to be added to the con/pend/mask register bank base.
+ */
+struct exynos_geint_data {
+	struct samsung_pin_bank	*bank;
+	u32			pin;
+	u32			eint_offset;
+};
+
+/**
+ * struct exynos_weint_data: irq specific data for all the wakeup interrupts
+ * generated by the external wakeup interrupt controller.
+ * @domain: irq domain representing the external wakeup interrupts
+ * @irq: interrupt number within the domain.
+ */
+struct exynos_weint_data {
+	struct irq_domain	*domain;
+	u32			irq;
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
new file mode 100644
index 000000000000..dd108a94acf9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -0,0 +1,888 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ *		http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver implements the Samsung pinctrl driver. It supports setting up of
+ * pinmux and pinconf configurations. The gpiolib interface is also included.
+ * External interrupt (gpio and wakeup) support are not included in this driver
+ * but provides extensions to which platform specific implementation of the gpio
+ * and wakeup interrupts can be hooked to.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include "core.h"
+#include "pinctrl-samsung.h"
+
+#define GROUP_SUFFIX		"-grp"
+#define GSUFFIX_LEN		sizeof(GROUP_SUFFIX)
+#define FUNCTION_SUFFIX		"-mux"
+#define FSUFFIX_LEN		sizeof(FUNCTION_SUFFIX)
+
+/* list of all possible config options supported */
+struct pin_config {
+	char		*prop_cfg;
+	unsigned int	cfg_type;
+} pcfgs[] = {
+	{ "samsung,pin-pud", PINCFG_TYPE_PUD },
+	{ "samsung,pin-drv", PINCFG_TYPE_DRV },
+	{ "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
+	{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
+};
+
+/* check if the selector is a valid pin group selector */
+static int samsung_get_group_count(struct pinctrl_dev *pctldev)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	return drvdata->nr_groups;
+}
+
+/* return the name of the group selected by the group selector */
+static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
+						unsigned selector)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	return drvdata->pin_groups[selector].name;
+}
+
+/* return the pin numbers associated with the specified group */
+static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
+		unsigned selector, const unsigned **pins, unsigned *num_pins)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	*pins = drvdata->pin_groups[selector].pins;
+	*num_pins = drvdata->pin_groups[selector].num_pins;
+	return 0;
+}
+
+/* create pinctrl_map entries by parsing device tree nodes */
+static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
+			struct device_node *np, struct pinctrl_map **maps,
+			unsigned *nmaps)
+{
+	struct device *dev = pctldev->dev;
+	struct pinctrl_map *map;
+	unsigned long *cfg = NULL;
+	char *gname, *fname;
+	int cfg_cnt = 0, map_cnt = 0, idx = 0;
+
+	/* count the number of config options specfied in the node */
+	for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+		if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
+			cfg_cnt++;
+	}
+
+	/*
+	 * Find out the number of map entries to create. All the config options
+	 * can be accomadated into a single config map entry.
+	 */
+	if (cfg_cnt)
+		map_cnt = 1;
+	if (of_find_property(np, "samsung,pin-function", NULL))
+		map_cnt++;
+	if (!map_cnt) {
+		dev_err(dev, "node %s does not have either config or function "
+				"configurations\n", np->name);
+		return -EINVAL;
+	}
+
+	/* Allocate memory for pin-map entries */
+	map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
+	if (!map) {
+		dev_err(dev, "could not alloc memory for pin-maps\n");
+		return -ENOMEM;
+	}
+	*nmaps = 0;
+
+	/*
+	 * Allocate memory for pin group name. The pin group name is derived
+	 * from the node name from which these map entries are be created.
+	 */
+	gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
+	if (!gname) {
+		dev_err(dev, "failed to alloc memory for group name\n");
+		goto free_map;
+	}
+	sprintf(gname, "%s%s", np->name, GROUP_SUFFIX);
+
+	/*
+	 * don't have config options? then skip over to creating function
+	 * map entries.
+	 */
+	if (!cfg_cnt)
+		goto skip_cfgs;
+
+	/* Allocate memory for config entries */
+	cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
+	if (!cfg) {
+		dev_err(dev, "failed to alloc memory for configs\n");
+		goto free_gname;
+	}
+
+	/* Prepare a list of config settings */
+	for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+		u32 value;
+		if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
+			cfg[cfg_cnt++] =
+				PINCFG_PACK(pcfgs[idx].cfg_type, value);
+	}
+
+	/* create the config map entry */
+	map[*nmaps].data.configs.group_or_pin = gname;
+	map[*nmaps].data.configs.configs = cfg;
+	map[*nmaps].data.configs.num_configs = cfg_cnt;
+	map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+	*nmaps += 1;
+
+skip_cfgs:
+	/* create the function map entry */
+	if (of_find_property(np, "samsung,pin-function", NULL)) {
+		fname = kzalloc(strlen(np->name) + FSUFFIX_LEN,	GFP_KERNEL);
+		if (!fname) {
+			dev_err(dev, "failed to alloc memory for func name\n");
+			goto free_cfg;
+		}
+		sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX);
+
+		map[*nmaps].data.mux.group = gname;
+		map[*nmaps].data.mux.function = fname;
+		map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
+		*nmaps += 1;
+	}
+
+	*maps = map;
+	return 0;
+
+free_cfg:
+	kfree(cfg);
+free_gname:
+	kfree(gname);
+free_map:
+	kfree(map);
+	return -ENOMEM;
+}
+
+/* free the memory allocated to hold the pin-map table */
+static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
+			     struct pinctrl_map *map, unsigned num_maps)
+{
+	int idx;
+
+	for (idx = 0; idx < num_maps; idx++) {
+		if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
+			kfree(map[idx].data.mux.function);
+			if (!idx)
+				kfree(map[idx].data.mux.group);
+		} else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
+			kfree(map[idx].data.configs.configs);
+			if (!idx)
+				kfree(map[idx].data.configs.group_or_pin);
+		}
+	};
+
+	kfree(map);
+}
+
+/* list of pinctrl callbacks for the pinctrl core */
+static struct pinctrl_ops samsung_pctrl_ops = {
+	.get_groups_count	= samsung_get_group_count,
+	.get_group_name		= samsung_get_group_name,
+	.get_group_pins		= samsung_get_group_pins,
+	.dt_node_to_map		= samsung_dt_node_to_map,
+	.dt_free_map		= samsung_dt_free_map,
+};
+
+/* check if the selector is a valid pin function selector */
+static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	return drvdata->nr_functions;
+}
+
+/* return the name of the pin function specified */
+static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
+						unsigned selector)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	return drvdata->pmx_functions[selector].name;
+}
+
+/* return the groups associated for the specified function selector */
+static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
+		unsigned selector, const char * const **groups,
+		unsigned * const num_groups)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	*groups = drvdata->pmx_functions[selector].groups;
+	*num_groups = drvdata->pmx_functions[selector].num_groups;
+	return 0;
+}
+
+/*
+ * given a pin number that is local to a pin controller, find out the pin bank
+ * and the register base of the pin bank.
+ */
+static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
+			void __iomem **reg, u32 *offset,
+			struct samsung_pin_bank **bank)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct samsung_pin_bank *b;
+
+	drvdata = dev_get_drvdata(gc->dev);
+	b = drvdata->ctrl->pin_banks;
+
+	while ((pin >= b->pin_base) &&
+			((b->pin_base + b->nr_pins - 1) < pin))
+		b++;
+
+	*reg = drvdata->virt_base + b->pctl_offset;
+	*offset = pin - b->pin_base;
+	if (bank)
+		*bank = b;
+
+	/* some banks have two config registers in a single bank */
+	if (*offset * b->func_width > BITS_PER_LONG)
+		*reg += 4;
+}
+
+/* enable or disable a pinmux function */
+static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
+					unsigned group, bool enable)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	const unsigned int *pins;
+	struct samsung_pin_bank *bank;
+	void __iomem *reg;
+	u32 mask, shift, data, pin_offset, cnt;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	pins = drvdata->pin_groups[group].pins;
+
+	/*
+	 * for each pin in the pin group selected, program the correspoding pin
+	 * pin function number in the config register.
+	 */
+	for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
+		pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
+				&reg, &pin_offset, &bank);
+		mask = (1 << bank->func_width) - 1;
+		shift = pin_offset * bank->func_width;
+
+		data = readl(reg);
+		data &= ~(mask << shift);
+		if (enable)
+			data |= drvdata->pin_groups[group].func << shift;
+		writel(data, reg);
+	}
+}
+
+/* enable a specified pinmux by writing to registers */
+static int samsung_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
+					unsigned group)
+{
+	samsung_pinmux_setup(pctldev, selector, group, true);
+	return 0;
+}
+
+/* disable a specified pinmux by writing to registers */
+static void samsung_pinmux_disable(struct pinctrl_dev *pctldev,
+					unsigned selector, unsigned group)
+{
+	samsung_pinmux_setup(pctldev, selector, group, false);
+}
+
+/*
+ * The calls to gpio_direction_output() and gpio_direction_input()
+ * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
+ * function called from the gpiolib interface).
+ */
+static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+	struct samsung_pin_bank *bank;
+	void __iomem *reg;
+	u32 data, pin_offset, mask, shift;
+
+	pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
+	mask = (1 << bank->func_width) - 1;
+	shift = pin_offset * bank->func_width;
+
+	data = readl(reg);
+	data &= ~(mask << shift);
+	if (!input)
+		data |= FUNC_OUTPUT << shift;
+	writel(data, reg);
+	return 0;
+}
+
+/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
+static struct pinmux_ops samsung_pinmux_ops = {
+	.get_functions_count	= samsung_get_functions_count,
+	.get_function_name	= samsung_pinmux_get_fname,
+	.get_function_groups	= samsung_pinmux_get_groups,
+	.enable			= samsung_pinmux_enable,
+	.disable		= samsung_pinmux_disable,
+	.gpio_set_direction	= samsung_pinmux_gpio_set_direction,
+};
+
+/* set or get the pin config settings for a specified pin */
+static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
+				unsigned long *config, bool set)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct samsung_pin_bank *bank;
+	void __iomem *reg_base;
+	enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
+	u32 data, width, pin_offset, mask, shift;
+	u32 cfg_value, cfg_reg;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
+					&pin_offset, &bank);
+
+	switch (cfg_type) {
+	case PINCFG_TYPE_PUD:
+		width = bank->pud_width;
+		cfg_reg = PUD_REG;
+		break;
+	case PINCFG_TYPE_DRV:
+		width = bank->drv_width;
+		cfg_reg = DRV_REG;
+		break;
+	case PINCFG_TYPE_CON_PDN:
+		width = bank->conpdn_width;
+		cfg_reg = CONPDN_REG;
+		break;
+	case PINCFG_TYPE_PUD_PDN:
+		width = bank->pudpdn_width;
+		cfg_reg = PUDPDN_REG;
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	mask = (1 << width) - 1;
+	shift = pin_offset * width;
+	data = readl(reg_base + cfg_reg);
+
+	if (set) {
+		cfg_value = PINCFG_UNPACK_VALUE(*config);
+		data &= ~(mask << shift);
+		data |= (cfg_value << shift);
+		writel(data, reg_base + cfg_reg);
+	} else {
+		data >>= shift;
+		data &= mask;
+		*config = PINCFG_PACK(cfg_type, data);
+	}
+	return 0;
+}
+
+/* set the pin config settings for a specified pin */
+static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+				unsigned long config)
+{
+	return samsung_pinconf_rw(pctldev, pin, &config, true);
+}
+
+/* get the pin config settings for a specified pin */
+static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+					unsigned long *config)
+{
+	return samsung_pinconf_rw(pctldev, pin, config, false);
+}
+
+/* set the pin config settings for a specified pin group */
+static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
+			unsigned group, unsigned long config)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	const unsigned int *pins;
+	unsigned int cnt;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	pins = drvdata->pin_groups[group].pins;
+
+	for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
+		samsung_pinconf_set(pctldev, pins[cnt], config);
+
+	return 0;
+}
+
+/* get the pin config settings for a specified pin group */
+static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
+				unsigned int group, unsigned long *config)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	const unsigned int *pins;
+
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+	pins = drvdata->pin_groups[group].pins;
+	samsung_pinconf_get(pctldev, pins[0], config);
+	return 0;
+}
+
+/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
+static struct pinconf_ops samsung_pinconf_ops = {
+	.pin_config_get		= samsung_pinconf_get,
+	.pin_config_set		= samsung_pinconf_set,
+	.pin_config_group_get	= samsung_pinconf_group_get,
+	.pin_config_group_set	= samsung_pinconf_group_set,
+};
+
+/* gpiolib gpio_set callback function */
+static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	void __iomem *reg;
+	u32 pin_offset, data;
+
+	pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+	data = readl(reg + DAT_REG);
+	data &= ~(1 << pin_offset);
+	if (value)
+		data |= 1 << pin_offset;
+	writel(data, reg + DAT_REG);
+}
+
+/* gpiolib gpio_get callback function */
+static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	void __iomem *reg;
+	u32 pin_offset, data;
+
+	pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+	data = readl(reg + DAT_REG);
+	data >>= pin_offset;
+	data &= 1;
+	return data;
+}
+
+/*
+ * gpiolib gpio_direction_input callback function. The setting of the pin
+ * mux function as 'gpio input' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+/*
+ * gpiolib gpio_direction_output callback function. The setting of the pin
+ * mux function as 'gpio output' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+							int value)
+{
+	samsung_gpio_set(gc, offset, value);
+	return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+/*
+ * Parse the pin names listed in the 'samsung,pins' property and convert it
+ * into a list of gpio numbers are create a pin group from it.
+ */
+static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev,
+			struct device_node *cfg_np, struct pinctrl_desc *pctl,
+			unsigned int **pin_list, unsigned int *npins)
+{
+	struct device *dev = &pdev->dev;
+	struct property *prop;
+	struct pinctrl_pin_desc const *pdesc = pctl->pins;
+	unsigned int idx = 0, cnt;
+	const char *pin_name;
+
+	*npins = of_property_count_strings(cfg_np, "samsung,pins");
+	if (*npins < 0) {
+		dev_err(dev, "invalid pin list in %s node", cfg_np->name);
+		return -EINVAL;
+	}
+
+	*pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
+	if (!*pin_list) {
+		dev_err(dev, "failed to allocate memory for pin list\n");
+		return -ENOMEM;
+	}
+
+	of_property_for_each_string(cfg_np, "samsung,pins", prop, pin_name) {
+		for (cnt = 0; cnt < pctl->npins; cnt++) {
+			if (pdesc[cnt].name) {
+				if (!strcmp(pin_name, pdesc[cnt].name)) {
+					(*pin_list)[idx++] = pdesc[cnt].number;
+					break;
+				}
+			}
+		}
+		if (cnt == pctl->npins) {
+			dev_err(dev, "pin %s not valid in %s node\n",
+					pin_name, cfg_np->name);
+			devm_kfree(dev, *pin_list);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Parse the information about all the available pin groups and pin functions
+ * from device node of the pin-controller. A pin group is formed with all
+ * the pins listed in the "samsung,pins" property.
+ */
+static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev,
+				struct samsung_pinctrl_drv_data *drvdata)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dev_np = dev->of_node;
+	struct device_node *cfg_np;
+	struct samsung_pin_group *groups, *grp;
+	struct samsung_pmx_func *functions, *func;
+	unsigned *pin_list;
+	unsigned int npins, grp_cnt, func_idx = 0;
+	char *gname, *fname;
+	int ret;
+
+	grp_cnt = of_get_child_count(dev_np);
+	if (!grp_cnt)
+		return -EINVAL;
+
+	groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
+	if (!groups) {
+		dev_err(dev, "failed allocate memory for ping group list\n");
+		return -EINVAL;
+	}
+	grp = groups;
+
+	functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
+	if (!functions) {
+		dev_err(dev, "failed to allocate memory for function list\n");
+		return -EINVAL;
+	}
+	func = functions;
+
+	/*
+	 * Iterate over all the child nodes of the pin controller node
+	 * and create pin groups and pin function lists.
+	 */
+	for_each_child_of_node(dev_np, cfg_np) {
+		u32 function;
+		if (of_find_property(cfg_np, "interrupt-controller", NULL))
+			continue;
+
+		ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
+					&drvdata->pctl,	&pin_list, &npins);
+		if (ret)
+			return ret;
+
+		/* derive pin group name from the node name */
+		gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
+					GFP_KERNEL);
+		if (!gname) {
+			dev_err(dev, "failed to alloc memory for group name\n");
+			return -ENOMEM;
+		}
+		sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX);
+
+		grp->name = gname;
+		grp->pins = pin_list;
+		grp->num_pins = npins;
+		of_property_read_u32(cfg_np, "samsung,pin-function", &function);
+		grp->func = function;
+		grp++;
+
+		if (!of_find_property(cfg_np, "samsung,pin-function", NULL))
+			continue;
+
+		/* derive function name from the node name */
+		fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
+					GFP_KERNEL);
+		if (!fname) {
+			dev_err(dev, "failed to alloc memory for func name\n");
+			return -ENOMEM;
+		}
+		sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX);
+
+		func->name = fname;
+		func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
+		if (!func->groups) {
+			dev_err(dev, "failed to alloc memory for group list "
+					"in pin function");
+			return -ENOMEM;
+		}
+		func->groups[0] = gname;
+		func->num_groups = 1;
+		func++;
+		func_idx++;
+	}
+
+	drvdata->pin_groups = groups;
+	drvdata->nr_groups = grp_cnt;
+	drvdata->pmx_functions = functions;
+	drvdata->nr_functions = func_idx;
+
+	return 0;
+}
+
+/* register the pinctrl interface with the pinctrl subsystem */
+static int __init samsung_pinctrl_register(struct platform_device *pdev,
+				struct samsung_pinctrl_drv_data *drvdata)
+{
+	struct pinctrl_desc *ctrldesc = &drvdata->pctl;
+	struct pinctrl_pin_desc *pindesc, *pdesc;
+	struct samsung_pin_bank *pin_bank;
+	char *pin_names;
+	int pin, bank, ret;
+
+	ctrldesc->name = "samsung-pinctrl";
+	ctrldesc->owner = THIS_MODULE;
+	ctrldesc->pctlops = &samsung_pctrl_ops;
+	ctrldesc->pmxops = &samsung_pinmux_ops;
+	ctrldesc->confops = &samsung_pinconf_ops;
+
+	pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
+			drvdata->ctrl->nr_pins, GFP_KERNEL);
+	if (!pindesc) {
+		dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
+		return -ENOMEM;
+	}
+	ctrldesc->pins = pindesc;
+	ctrldesc->npins = drvdata->ctrl->nr_pins;
+	ctrldesc->npins = drvdata->ctrl->nr_pins;
+
+	/* dynamically populate the pin number and pin name for pindesc */
+	for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
+		pdesc->number = pin + drvdata->ctrl->base;
+
+	/*
+	 * allocate space for storing the dynamically generated names for all
+	 * the pins which belong to this pin-controller.
+	 */
+	pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
+					drvdata->ctrl->nr_pins, GFP_KERNEL);
+	if (!pin_names) {
+		dev_err(&pdev->dev, "mem alloc for pin names failed\n");
+		return -ENOMEM;
+	}
+
+	/* for each pin, the name of the pin is pin-bank name + pin number */
+	for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) {
+		pin_bank = &drvdata->ctrl->pin_banks[bank];
+		for (pin = 0; pin < pin_bank->nr_pins; pin++) {
+			sprintf(pin_names, "%s-%d", pin_bank->name, pin);
+			pdesc = pindesc + pin_bank->pin_base + pin;
+			pdesc->name = pin_names;
+			pin_names += PIN_NAME_LENGTH;
+		}
+	}
+
+	drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata);
+	if (!drvdata->pctl_dev) {
+		dev_err(&pdev->dev, "could not register pinctrl driver\n");
+		return -EINVAL;
+	}
+
+	drvdata->grange.name = "samsung-pctrl-gpio-range";
+	drvdata->grange.id = 0;
+	drvdata->grange.base = drvdata->ctrl->base;
+	drvdata->grange.npins = drvdata->ctrl->nr_pins;
+	drvdata->grange.gc = drvdata->gc;
+	pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
+
+	ret = samsung_pinctrl_parse_dt(pdev, drvdata);
+	if (ret) {
+		pinctrl_unregister(drvdata->pctl_dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* register the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_register(struct platform_device *pdev,
+				struct samsung_pinctrl_drv_data *drvdata)
+{
+	struct gpio_chip *gc;
+	int ret;
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc) {
+		dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
+		return -ENOMEM;
+	}
+
+	drvdata->gc = gc;
+	gc->base = drvdata->ctrl->base;
+	gc->ngpio = drvdata->ctrl->nr_pins;
+	gc->dev = &pdev->dev;
+	gc->set = samsung_gpio_set;
+	gc->get = samsung_gpio_get;
+	gc->direction_input = samsung_gpio_direction_input;
+	gc->direction_output = samsung_gpio_direction_output;
+	gc->label = drvdata->ctrl->label;
+	gc->owner = THIS_MODULE;
+	ret = gpiochip_add(gc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
+					"code: %d\n", gc->label, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* unregister the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_unregister(struct platform_device *pdev,
+				struct samsung_pinctrl_drv_data *drvdata)
+{
+	int ret = gpiochip_remove(drvdata->gc);
+	if (ret) {
+		dev_err(&pdev->dev, "gpio chip remove failed\n");
+		return ret;
+	}
+	return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[];
+
+/* retrieve the soc specific data */
+static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
+				struct platform_device *pdev)
+{
+	int id;
+	const struct of_device_id *match;
+	const struct device_node *node = pdev->dev.of_node;
+
+	id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
+	if (id < 0) {
+		dev_err(&pdev->dev, "failed to get alias id\n");
+		return NULL;
+	}
+	match = of_match_node(samsung_pinctrl_dt_match, node);
+	return (struct samsung_pin_ctrl *)match->data + id;
+}
+
+static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
+{
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct device *dev = &pdev->dev;
+	struct samsung_pin_ctrl *ctrl;
+	struct resource *res;
+	int ret;
+
+	if (!dev->of_node) {
+		dev_err(dev, "device tree node not found\n");
+		return -ENODEV;
+	}
+
+	ctrl = samsung_pinctrl_get_soc_data(pdev);
+	if (!ctrl) {
+		dev_err(&pdev->dev, "driver data not available\n");
+		return -EINVAL;
+	}
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(dev, "failed to allocate memory for driver's "
+				"private data\n");
+		return -ENOMEM;
+	}
+	drvdata->ctrl = ctrl;
+	drvdata->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "cannot find IO resource\n");
+		return -ENOENT;
+	}
+
+	drvdata->virt_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!drvdata->virt_base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res)
+		drvdata->irq = res->start;
+
+	ret = samsung_gpiolib_register(pdev, drvdata);
+	if (ret)
+		return ret;
+
+	ret = samsung_pinctrl_register(pdev, drvdata);
+	if (ret) {
+		samsung_gpiolib_unregister(pdev, drvdata);
+		return ret;
+	}
+
+	if (ctrl->eint_gpio_init)
+		ctrl->eint_gpio_init(drvdata);
+	if (ctrl->eint_wkup_init)
+		ctrl->eint_wkup_init(drvdata);
+
+	platform_set_drvdata(pdev, drvdata);
+	return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[] = {
+	{ .compatible = "samsung,pinctrl-exynos4210",
+		.data = (void *)exynos4210_pin_ctrl },
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
+
+static struct platform_driver samsung_pinctrl_driver = {
+	.probe		= samsung_pinctrl_probe,
+	.driver = {
+		.name	= "samsung-pinctrl",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(samsung_pinctrl_dt_match),
+	},
+};
+
+static int __init samsung_pinctrl_drv_register(void)
+{
+	return platform_driver_register(&samsung_pinctrl_driver);
+}
+postcore_initcall(samsung_pinctrl_drv_register);
+
+static void __exit samsung_pinctrl_drv_unregister(void)
+{
+	platform_driver_unregister(&samsung_pinctrl_driver);
+}
+module_exit(samsung_pinctrl_drv_unregister);
+
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
+MODULE_DESCRIPTION("Samsung pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
new file mode 100644
index 000000000000..b8956934cda6
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -0,0 +1,239 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ *		http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_SAMSUNG_H
+#define __PINCTRL_SAMSUNG_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+/* register offsets within a pin bank */
+#define DAT_REG		0x4
+#define PUD_REG		0x8
+#define DRV_REG		0xC
+#define CONPDN_REG	0x10
+#define PUDPDN_REG	0x14
+
+/* pinmux function number for pin as gpio output line */
+#define FUNC_OUTPUT	0x1
+
+/**
+ * enum pincfg_type - possible pin configuration types supported.
+ * @PINCFG_TYPE_PUD: Pull up/down configuration.
+ * @PINCFG_TYPE_DRV: Drive strength configuration.
+ * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
+ * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
+ */
+enum pincfg_type {
+	PINCFG_TYPE_PUD,
+	PINCFG_TYPE_DRV,
+	PINCFG_TYPE_CON_PDN,
+	PINCFG_TYPE_PUD_PDN,
+};
+
+/*
+ * pin configuration (pull up/down and drive strength) type and its value are
+ * packed together into a 16-bits. The upper 8-bits represent the configuration
+ * type and the lower 8-bits hold the value of the configuration type.
+ */
+#define PINCFG_TYPE_MASK		0xFF
+#define PINCFG_VALUE_SHIFT		8
+#define PINCFG_VALUE_MASK		(0xFF << PINCFG_VALUE_SHIFT)
+#define PINCFG_PACK(type, value)	(((value) << PINCFG_VALUE_SHIFT) | type)
+#define PINCFG_UNPACK_TYPE(cfg)		((cfg) & PINCFG_TYPE_MASK)
+#define PINCFG_UNPACK_VALUE(cfg)	(((cfg) & PINCFG_VALUE_MASK) >> \
+						PINCFG_VALUE_SHIFT)
+/**
+ * enum eint_type - possible external interrupt types.
+ * @EINT_TYPE_NONE: bank does not support external interrupts
+ * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
+ * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ *
+ * Samsung GPIO controller groups all the available pins into banks. The pins
+ * in a pin bank can support external gpio interrupts or external wakeup
+ * interrupts or no interrupts at all. From a software perspective, the only
+ * difference between external gpio and external wakeup interrupts is that
+ * the wakeup interrupts can additionally wakeup the system if it is in
+ * suspended state.
+ */
+enum eint_type {
+	EINT_TYPE_NONE,
+	EINT_TYPE_GPIO,
+	EINT_TYPE_WKUP,
+};
+
+/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
+#define PIN_NAME_LENGTH	10
+
+#define PIN_GROUP(n, p, f)				\
+	{						\
+		.name		= n,			\
+		.pins		= p,			\
+		.num_pins	= ARRAY_SIZE(p),	\
+		.func		= f			\
+	}
+
+#define PMX_FUNC(n, g)					\
+	{						\
+		.name		= n,			\
+		.groups		= g,			\
+		.num_groups	= ARRAY_SIZE(g),	\
+	}
+
+struct samsung_pinctrl_drv_data;
+
+/**
+ * struct samsung_pin_bank: represent a controller pin-bank.
+ * @reg_offset: starting offset of the pin-bank registers.
+ * @pin_base: starting pin number of the bank.
+ * @nr_pins: number of pins included in this bank.
+ * @func_width: width of the function selector bit field.
+ * @pud_width: width of the pin pull up/down selector bit field.
+ * @drv_width: width of the pin driver strength selector bit field.
+ * @conpdn_width: width of the sleep mode function selector bin field.
+ * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
+ * @eint_type: type of the external interrupt supported by the bank.
+ * @irq_base: starting controller local irq number of the bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ */
+struct samsung_pin_bank {
+	u32		pctl_offset;
+	u32		pin_base;
+	u8		nr_pins;
+	u8		func_width;
+	u8		pud_width;
+	u8		drv_width;
+	u8		conpdn_width;
+	u8		pudpdn_width;
+	enum eint_type	eint_type;
+	u32		irq_base;
+	char		*name;
+};
+
+/**
+ * struct samsung_pin_ctrl: represent a pin controller.
+ * @pin_banks: list of pin banks included in this controller.
+ * @nr_banks: number of pin banks.
+ * @base: starting system wide pin number.
+ * @nr_pins: number of pins supported by the controller.
+ * @nr_gint: number of external gpio interrupts supported.
+ * @nr_wint: number of external wakeup interrupts supported.
+ * @geint_con: offset of the ext-gpio controller registers.
+ * @geint_mask: offset of the ext-gpio interrupt mask registers.
+ * @geint_pend: offset of the ext-gpio interrupt pending registers.
+ * @weint_con: offset of the ext-wakeup controller registers.
+ * @weint_mask: offset of the ext-wakeup interrupt mask registers.
+ * @weint_pend: offset of the ext-wakeup interrupt pending registers.
+ * @svc: offset of the interrupt service register.
+ * @eint_gpio_init: platform specific callback to setup the external gpio
+ *	interrupts for the controller.
+ * @eint_wkup_init: platform specific callback to setup the external wakeup
+ *	interrupts for the controller.
+ * @label: for debug information.
+ */
+struct samsung_pin_ctrl {
+	struct samsung_pin_bank	*pin_banks;
+	u32		nr_banks;
+
+	u32		base;
+	u32		nr_pins;
+	u32		nr_gint;
+	u32		nr_wint;
+
+	u32		geint_con;
+	u32		geint_mask;
+	u32		geint_pend;
+
+	u32		weint_con;
+	u32		weint_mask;
+	u32		weint_pend;
+
+	u32		svc;
+
+	int		(*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
+	int		(*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
+	char		*label;
+};
+
+/**
+ * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
+ * @virt_base: register base address of the controller.
+ * @dev: device instance representing the controller.
+ * @irq: interrpt number used by the controller to notify gpio interrupts.
+ * @ctrl: pin controller instance managed by the driver.
+ * @pctl: pin controller descriptor registered with the pinctrl subsystem.
+ * @pctl_dev: cookie representing pinctrl device instance.
+ * @pin_groups: list of pin groups available to the driver.
+ * @nr_groups: number of such pin groups.
+ * @pmx_functions: list of pin functions available to the driver.
+ * @nr_function: number of such pin functions.
+ * @gc: gpio_chip instance registered with gpiolib.
+ * @grange: linux gpio pin range supported by this controller.
+ */
+struct samsung_pinctrl_drv_data {
+	void __iomem			*virt_base;
+	struct device			*dev;
+	int				irq;
+
+	struct samsung_pin_ctrl		*ctrl;
+	struct pinctrl_desc		pctl;
+	struct pinctrl_dev		*pctl_dev;
+
+	const struct samsung_pin_group	*pin_groups;
+	unsigned int			nr_groups;
+	const struct samsung_pmx_func	*pmx_functions;
+	unsigned int			nr_functions;
+
+	struct irq_domain		*gpio_irqd;
+	struct irq_domain		*wkup_irqd;
+
+	struct gpio_chip		*gc;
+	struct pinctrl_gpio_range	grange;
+};
+
+/**
+ * struct samsung_pin_group: represent group of pins of a pinmux function.
+ * @name: name of the pin group, used to lookup the group.
+ * @pins: the pins included in this group.
+ * @num_pins: number of pins included in this group.
+ * @func: the function number to be programmed when selected.
+ */
+struct samsung_pin_group {
+	const char		*name;
+	const unsigned int	*pins;
+	u8			num_pins;
+	u8			func;
+};
+
+/**
+ * struct samsung_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @num_groups: number of groups included in @groups.
+ */
+struct samsung_pmx_func {
+	const char		*name;
+	const char		**groups;
+	u8			num_groups;
+};
+
+/* list of all exported SoC specific data */
+extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
+
+#endif /* __PINCTRL_SAMSUNG_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 3aade1d8f410..c6f8dad2ceb0 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -237,4 +237,20 @@ struct gpio_led_platform_data {
 struct platform_device *gpio_led_register_device(
 		int id, const struct gpio_led_platform_data *pdata);
 
+enum cpu_led_event {
+	CPU_LED_IDLE_START,	/* CPU enters idle */
+	CPU_LED_IDLE_END,	/* CPU idle ends */
+	CPU_LED_START,		/* Machine starts, especially resume */
+	CPU_LED_STOP,		/* Machine stops, especially suspend */
+	CPU_LED_HALTED,		/* Machine shutdown */
+};
+#ifdef CONFIG_LEDS_TRIGGER_CPU
+extern void ledtrig_cpu(enum cpu_led_event evt);
+#else
+static inline void ledtrig_cpu(enum cpu_led_event evt)
+{
+	return;
+}
+#endif
+
 #endif		/* __LINUX_LEDS_H_INCLUDED */