nl80211: Add frequency configuration (including HT40)

This patch adds new NL80211_CMD_SET_WIPHY attributes
NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow
userspace to set the operating channel (e.g., hostapd for AP mode).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 files changed, 131 insertions, 6 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e08c8bcfb78d..92f79d2bdd8c 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -26,8 +26,9 @@
  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME
- *	and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS.
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
+ *	%NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -180,6 +181,14 @@ enum nl80211_commands {
  *	/sys/class/ieee80211/<phyname>/index
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
+ *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *	NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *		this attribute)
+ *	NL80211_SEC_CHAN_DISABLED = HT20 only
+ *	NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
+ *	NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -315,6 +324,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_BSS_BASIC_RATES,
 
 	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+	NL80211_ATTR_WIPHY_FREQ,
+	NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -329,6 +340,8 @@ enum nl80211_attrs {
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
@@ -742,4 +755,10 @@ enum nl80211_txq_q {
 	NL80211_TXQ_Q_BK
 };
 
+enum nl80211_sec_chan_offset {
+	NL80211_SEC_CHAN_NO_HT /* No HT */,
+	NL80211_SEC_CHAN_DISABLED /* HT20 only */,
+	NL80211_SEC_CHAN_BELOW /* HT40- */,
+	NL80211_SEC_CHAN_ABOVE /* HT40+ */
+};
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1d57835d73f2..53b06f6c62ca 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -392,6 +392,9 @@ struct ieee80211_txq_params {
 /* from net/wireless.h */
 struct wiphy;
 
+/* from net/ieee80211.h */
+struct ieee80211_channel;
+
 /**
  * struct cfg80211_ops - backend description for wireless configuration
  *
@@ -450,6 +453,8 @@ struct wiphy;
  * @change_bss: Modify parameters for a given BSS.
  *
  * @set_txq_params: Set TX queue parameters
+ *
+ * @set_channel: Set channel
  */
 struct cfg80211_ops {
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
@@ -513,6 +518,10 @@ struct cfg80211_ops {
 
 	int	(*set_txq_params)(struct wiphy *wiphy,
 				  struct ieee80211_txq_params *params);
+
+	int	(*set_channel)(struct wiphy *wiphy,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_sec_chan_offset);
 };
 
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 6a1d4ea18186..6e823cc6a4b1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -507,6 +507,9 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
 
 struct ieee80211_ht_conf {
 	bool enabled;
+	int sec_chan_offset; /* 0 = HT40 disabled; -1 = HT40 enabled, secondary
+			      * channel below primary; 1 = HT40 enabled,
+			      * secondary channel above primary */
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 16423f94801b..7a7a6c176dc5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1095,6 +1095,18 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ieee80211_set_channel(struct wiphy *wiphy,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_sec_chan_offset sec_chan_offset)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	local->oper_channel = chan;
+	local->oper_sec_chan_offset = sec_chan_offset;
+
+	return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -1122,4 +1134,5 @@ struct cfg80211_ops mac80211_config_ops = {
 #endif
 	.change_bss = ieee80211_change_bss,
 	.set_txq_params = ieee80211_set_txq_params,
+	.set_channel = ieee80211_set_channel,
 };
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 155a20410017..527205f8c1a1 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -626,6 +626,7 @@ struct ieee80211_local {
 	struct delayed_work scan_work;
 	struct ieee80211_sub_if_data *scan_sdata;
 	struct ieee80211_channel *oper_channel, *scan_channel;
+	enum nl80211_sec_chan_offset oper_sec_chan_offset;
 	u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
 	size_t scan_ssid_len;
 	struct list_head bss_list;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index cec9b6d3e1ce..29c3ecf7e914 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -195,20 +195,42 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 	struct ieee80211_channel *chan;
 	int ret = 0;
 	int power;
+	enum nl80211_sec_chan_offset sec_chan_offset;
 
 	might_sleep();
 
-	if (local->sw_scanning)
+	if (local->sw_scanning) {
 		chan = local->scan_channel;
-	else
+		sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
+	} else {
 		chan = local->oper_channel;
+		sec_chan_offset = local->oper_sec_chan_offset;
+	}
 
-	if (chan != local->hw.conf.channel) {
+	if (chan != local->hw.conf.channel ||
+	    sec_chan_offset != local->hw.conf.ht.sec_chan_offset) {
 		local->hw.conf.channel = chan;
+		switch (sec_chan_offset) {
+		case NL80211_SEC_CHAN_NO_HT:
+			local->hw.conf.ht.enabled = false;
+			local->hw.conf.ht.sec_chan_offset = 0;
+			break;
+		case NL80211_SEC_CHAN_DISABLED:
+			local->hw.conf.ht.enabled = true;
+			local->hw.conf.ht.sec_chan_offset = 0;
+			break;
+		case NL80211_SEC_CHAN_BELOW:
+			local->hw.conf.ht.enabled = true;
+			local->hw.conf.ht.sec_chan_offset = -1;
+			break;
+		case NL80211_SEC_CHAN_ABOVE:
+			local->hw.conf.ht.enabled = true;
+			local->hw.conf.ht.sec_chan_offset = 1;
+			break;
+		}
 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 	}
 
-
 	if (!local->hw.conf.power_level)
 		power = chan->max_power;
 	else
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 0f841317c7e9..505d68f344ce 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -641,6 +641,7 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
 		    chan->flags & IEEE80211_CHAN_NO_IBSS)
 			return ret;
 		local->oper_channel = chan;
+		local->oper_sec_chan_offset = NL80211_SEC_CHAN_NO_HT;
 
 		if (local->sw_scanning || local->hw_scanning)
 			ret = 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c9141e3df9ba..9caee6022e3f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -59,6 +59,8 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 	[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
 				      .len = BUS_ID_SIZE-1 },
 	[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
+	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET] = { .type = NLA_U32 },
 
 	[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
@@ -359,6 +361,61 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
+	if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
+		enum nl80211_sec_chan_offset sec_chan_offset =
+			NL80211_SEC_CHAN_NO_HT;
+		struct ieee80211_channel *chan;
+		u32 freq, sec_freq;
+
+		if (!rdev->ops->set_channel) {
+			result = -EOPNOTSUPP;
+			goto bad_res;
+		}
+
+		if (info->attrs[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]) {
+			sec_chan_offset = nla_get_u32(
+				info->attrs[
+					NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]);
+			if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT &&
+			    sec_chan_offset != NL80211_SEC_CHAN_DISABLED &&
+			    sec_chan_offset != NL80211_SEC_CHAN_BELOW &&
+			    sec_chan_offset != NL80211_SEC_CHAN_ABOVE) {
+				result = -EINVAL;
+				goto bad_res;
+			}
+		}
+
+		freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+		chan = ieee80211_get_channel(&rdev->wiphy, freq);
+		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) {
+			/* Primary channel not allowed */
+			result = -EINVAL;
+			goto bad_res;
+		}
+		if (sec_chan_offset == NL80211_SEC_CHAN_BELOW)
+			sec_freq = freq - 20;
+		else if (sec_chan_offset == NL80211_SEC_CHAN_ABOVE)
+			sec_freq = freq + 20;
+		else
+			sec_freq = 0;
+
+		if (sec_freq) {
+			struct ieee80211_channel *schan;
+			schan = ieee80211_get_channel(&rdev->wiphy, sec_freq);
+			if (!schan || schan->flags & IEEE80211_CHAN_DISABLED) {
+				/* Secondary channel not allowed */
+				result = -EINVAL;
+				goto bad_res;
+			}
+		}
+
+		result = rdev->ops->set_channel(&rdev->wiphy, chan,
+						sec_chan_offset);
+		if (result)
+			goto bad_res;
+	}
+
+
 bad_res:
 	cfg80211_put_dev(rdev);
 	return result;