Merge branch 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-loki: delete ARM: mach-s3c2400: delete ARM: mach-s3c24a0: delete
author: Linus Torvalds <torvalds@linux-foundation.org> 2011-07-25 12:43:28 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2011-07-25 12:43:28 -0700
commit: 4b478cedcdc1b2d131170f22bd3f916e53472f52 (patch)
tree: 4a458a850d99fe3e2768fc62b2e3761c85ea05c2
parent: ae4c42e4e4d76d003f8ca551fe1aef93ff9a4b21 (diff)
parent: c8b7d43b6d539218c36f0ac8a6ad434b93195703 (diff)
download: linux-4b478cedcdc1b2d131170f22bd3f916e53472f52.tar.gz
54 files changed, 9 insertions, 2133 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index c12bfc1a00c9..359587b2367b 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,10 +8,13 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
+  S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
   are supported.
 
-  Support for the S3C2400 and S3C24A0 series are in progress.
+  Support for the S3C2400 and S3C24A0 series was never completed and the
+  corresponding code has been removed after a while.  If someone wishes to
+  revive this effort, partial support can be retrieved from earlier Linux
+  versions.
 
   The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
   included under the arch/arm/mach-s3c2416 directory. Note, whilst core
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ebaa380fde29..9cb1f4bd7618 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,14 +493,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_LOKI
-	bool "Marvell Loki (88RC8480)"
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
-	help
-	  Support for the Marvell Loki (88RC8480) SoC.
-
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
 	select CLKSRC_MMIO
@@ -937,8 +929,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
-source "arch/arm/mach-loki/Kconfig"
-
 source "arch/arm/mach-lpc32xx/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
@@ -982,7 +972,6 @@ source "arch/arm/plat-spear/Kconfig"
 source "arch/arm/plat-tcc/Kconfig"
 
 if ARCH_S3C2410
-source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2416/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f5b2b390c8f2..206c34ecb9e3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,7 +150,6 @@ machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_LOKI) 		:= loki
 machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
@@ -172,8 +171,7 @@ machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
-machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
deleted file mode 100644
index 1ba752b2dc6d..000000000000
--- a/arch/arm/configs/loki_defconfig
+++ /dev/null
@@ -1,120 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_LOKI=y
-CONFIG_MACH_LB88RC8480=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_NEW_LEDS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_XFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig
deleted file mode 100644
index 0045bdd761ca..000000000000
--- a/arch/arm/mach-loki/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if ARCH_LOKI
-
-menu "Marvell Loki (88RC8480) Implementations"
-
-config MACH_LB88RC8480
-	bool "Marvell LB88RC8480 Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell LB88RC8480 Development Board.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile
deleted file mode 100644
index d43233ee590f..000000000000
--- a/arch/arm/mach-loki/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y				+= common.o addr-map.o irq.o
-
-obj-$(CONFIG_MACH_LB88RC8480)	+= lb88rc8480-setup.o
diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-loki/Makefile.boot
deleted file mode 100644
index 67039c3e0c48..000000000000
--- a/arch/arm/mach-loki/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
deleted file mode 100644
index b9537c97beba..000000000000
--- a/arch/arm/mach-loki/addr-map.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-loki/addr-map.c
- *
- * Address map functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR		0
-#define TARGET_DEV_BUS		1
-#define TARGET_PCIE0		3
-#define TARGET_PCIE1		4
-#define ATTR_DEV_BOOT		0x0f
-#define ATTR_DEV_CS2		0x1b
-#define ATTR_DEV_CS1		0x1d
-#define ATTR_DEV_CS0		0x1e
-#define ATTR_PCIE_IO		0x51
-#define ATTR_PCIE_MEM		0x59
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_SIZE_CS(n)		DDR_REG(0x1500 + ((n) << 3))
-#define DDR_BASE_CS(n)		DDR_REG(0x1504 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n)	BRIDGE_REG(0x00c | ((n) << 4))
-
-
-struct mbus_dram_target_info loki_mbus_dram_info;
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
-				 u8 target, u8 attr, int remap)
-{
-	u32 ctrl;
-
-	base &= 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
-
-	writel(base, CPU_WIN_BASE(win));
-	writel(ctrl, CPU_WIN_CTRL(win));
-	if (win < 2) {
-		if (remap < 0)
-			remap = base;
-
-		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
-		writel(0, CPU_WIN_REMAP_HI(win));
-	}
-}
-
-void __init loki_setup_cpu_mbus(void)
-{
-	int i;
-	int cs;
-
-	/*
-	 * First, disable and clear windows.
-	 */
-	for (i = 0; i < 8; i++) {
-		writel(0, CPU_WIN_BASE(i));
-		writel(0, CPU_WIN_CTRL(i));
-		if (i < 2) {
-			writel(0, CPU_WIN_REMAP_LO(i));
-			writel(0, CPU_WIN_REMAP_HI(i));
-		}
-	}
-
-	/*
-	 * Setup windows for PCIe IO+MEM space.
-	 */
-	setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
-		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
-	setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
-		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(DDR_BASE_CS(i));
-		u32 size = readl(DDR_SIZE_CS(i));
-
-		/*
-		 * Chip select enabled?
-		 */
-		if (size & 1) {
-			struct mbus_dram_window *w;
-
-			w = &loki_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0xf & ~(1 << i);
-			w->base = base & 0xffff0000;
-			w->size = (size | 0x0000ffff) + 1;
-		}
-	}
-	loki_mbus_dram_info.num_cs = cs;
-}
-
-void __init loki_setup_dev_boot_win(u32 base, u32 size)
-{
-	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-}
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
deleted file mode 100644
index 5f02664db812..000000000000
--- a/arch/arm/mach-loki/common.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * arch/arm/mach-loki/common.c
- *
- * Core functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mbus.h>
-#include <linux/dma-mapping.h>
-#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/loki.h>
-#include <plat/orion_nand.h>
-#include <plat/time.h>
-#include <plat/common.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc loki_io_desc[] __initdata = {
-	{
-		.virtual	= LOKI_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(LOKI_REGS_PHYS_BASE),
-		.length		= LOKI_REGS_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init loki_map_io(void)
-{
-	iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
-
-	orion_ge00_init(eth_data, &loki_mbus_dram_info,
-			GE0_PHYS_BASE, IRQ_LOKI_GBE_A_INT,
-			0, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
-
-	orion_ge01_init(eth_data, &loki_mbus_dram_info,
-			GE1_PHYS_BASE, IRQ_LOKI_GBE_B_INT,
-			0, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * SAS/SATA
- ****************************************************************************/
-static struct resource loki_sas_resources[] = {
-	{
-		.name	= "mvsas0 mem",
-		.start	= SAS0_PHYS_BASE,
-		.end	= SAS0_PHYS_BASE + 0x01ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "mvsas0 irq",
-		.start	= IRQ_LOKI_SAS_A,
-		.end	= IRQ_LOKI_SAS_A,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "mvsas1 mem",
-		.start	= SAS1_PHYS_BASE,
-		.end	= SAS1_PHYS_BASE + 0x01ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "mvsas1 irq",
-		.start	= IRQ_LOKI_SAS_B,
-		.end	= IRQ_LOKI_SAS_B,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device loki_sas = {
-	.name		= "mvsas",
-	.id		= 0,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(loki_sas_resources),
-	.resource	= loki_sas_resources,
-};
-
-void __init loki_sas_init(void)
-{
-	writel(0x8300f707, DDR_REG(0x1424));
-	platform_device_register(&loki_sas);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-void __init loki_uart0_init(void)
-{
-	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_LOKI_UART0, LOKI_TCLK);
-}
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init loki_uart1_init(void)
-{
-	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_LOKI_UART1, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init loki_init_early(void)
-{
-	orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-static void loki_timer_init(void)
-{
-	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_LOKI_BRIDGE, LOKI_TCLK);
-}
-
-struct sys_timer loki_timer = {
-	.init = loki_timer_init,
-};
-
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-void __init loki_init(void)
-{
-	printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
-
-	loki_setup_cpu_mbus();
-}
diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h
deleted file mode 100644
index a315dcf8887c..000000000000
--- a/arch/arm/mach-loki/common.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-loki/common.h
- *
- * Core functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_LOKI_COMMON_H
-#define __ARCH_LOKI_COMMON_H
-
-struct mv643xx_eth_platform_data;
-
-/*
- * Basic Loki init functions used early by machine-setup.
- */
-void loki_map_io(void);
-void loki_init(void);
-void loki_init_early(void);
-void loki_init_irq(void);
-
-extern struct mbus_dram_target_info loki_mbus_dram_info;
-void loki_setup_cpu_mbus(void);
-void loki_setup_dev_boot_win(u32 base, u32 size);
-
-void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
-void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
-void loki_sas_init(void);
-void loki_uart0_init(void);
-void loki_uart1_init(void);
-
-extern struct sys_timer loki_timer;
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h
deleted file mode 100644
index fd87732097cd..000000000000
--- a/arch/arm/mach-loki/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/bridge-regs.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/loki.h>
-
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN	0x00000004
-
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET		0x00000001
-
-#define BRIDGE_INT_TIMER1_CLR	0x0004
-
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF		0x0000
-#define IRQ_MASK_OFF		0x0004
-
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
deleted file mode 100644
index cc90d99ac76c..000000000000
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/loki.h>
-
-	.macro	addruart, rp, rv
-	ldr	\rp, =LOKI_REGS_PHYS_BASE
-	ldr	\rv, =LOKI_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
deleted file mode 100644
index bc917ed3a62d..000000000000
--- a/arch/arm/mach-loki/include/mach/entry-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_OFF]
-	mov	\irqnr, #0
-	ands	\irqstat, \irqstat, \tmp
-	clzne	\irqnr, \irqstat
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
deleted file mode 100644
index d7bfc8f17729..000000000000
--- a/arch/arm/mach-loki/include/mach/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
deleted file mode 100644
index a373cd582c84..000000000000
--- a/arch/arm/mach-loki/include/mach/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
-					+ LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
deleted file mode 100644
index 9fbd3326867b..000000000000
--- a/arch/arm/mach-loki/include/mach/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h"	/* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
-#define IRQ_LOKI_COM_A_ERR		6
-#define IRQ_LOKI_COM_A_IN		7
-#define IRQ_LOKI_COM_A_OUT		8
-#define IRQ_LOKI_COM_B_ERR		9
-#define IRQ_LOKI_COM_B_IN		10
-#define IRQ_LOKI_COM_B_OUT		11
-#define IRQ_LOKI_DMA_A			12
-#define IRQ_LOKI_DMA_B			13
-#define IRQ_LOKI_SAS_A			14
-#define IRQ_LOKI_SAS_B			15
-#define IRQ_LOKI_DDR			16
-#define IRQ_LOKI_XOR			17
-#define IRQ_LOKI_BRIDGE			18
-#define IRQ_LOKI_PCIE_A_ERR		20
-#define IRQ_LOKI_PCIE_A_INT		21
-#define IRQ_LOKI_PCIE_B_ERR		22
-#define IRQ_LOKI_PCIE_B_INT		23
-#define IRQ_LOKI_GBE_A_INT		24
-#define IRQ_LOKI_GBE_B_INT		25
-#define IRQ_LOKI_DEV_ERR		26
-#define IRQ_LOKI_UART0			27
-#define IRQ_LOKI_UART1			28
-#define IRQ_LOKI_TWSI			29
-#define IRQ_LOKI_GPIO_23_0		30
-#define IRQ_LOKI_GPIO_25_24		31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
deleted file mode 100644
index bfca7c265f43..000000000000
--- a/arch/arm/mach-loki/include/mach/loki.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/loki.h
- *
- * Generic definitions for Marvell Loki (88RC8480) SoC flavors
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_LOKI_H
-#define __ASM_ARCH_LOKI_H
-
-/*
- * Marvell Loki (88RC8480) address maps.
- *
- * phys
- * d0000000	on-chip peripheral registers
- * e0000000	PCIe 0 Memory space
- * e8000000	PCIe 1 Memory space
- * f0000000	PCIe 0 I/O space
- * f0100000	PCIe 1 I/O space
- *
- * virt		phys		size
- * fed00000	d0000000	1M	on-chip peripheral registers
- * fee00000	f0000000	64K	PCIe 0 I/O space
- * fef00000	f0100000	64K	PCIe 1 I/O space
- */
-
-#define LOKI_REGS_PHYS_BASE		0xd0000000
-#define LOKI_REGS_VIRT_BASE		0xfed00000
-#define LOKI_REGS_SIZE			SZ_1M
-
-#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
-#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
-#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE0_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
-#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
-#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE1_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
-#define LOKI_PCIE0_MEM_SIZE		SZ_128M
-
-#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
-#define LOKI_PCIE1_MEM_SIZE		SZ_128M
-
-/*
- * Register Map
- */
-#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-
-#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
-
-#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
-
-#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
-
-#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
-
-#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
-#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
-
-#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
-#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
-
-#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
-#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
-
-
-#define GPIO_MAX		8
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
deleted file mode 100644
index 66366657a875..000000000000
--- a/arch/arm/mach-loki/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
deleted file mode 100644
index 71895199a534..000000000000
--- a/arch/arm/mach-loki/include/mach/system.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/bridge-regs.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
deleted file mode 100644
index 9df210915297..000000000000
--- a/arch/arm/mach-loki/include/mach/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define LOKI_TCLK		180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
deleted file mode 100644
index 90b2a7e65da3..000000000000
--- a/arch/arm/mach-loki/include/mach/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/loki.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
deleted file mode 100644
index 5dcbd865443f..000000000000
--- a/arch/arm/mach-loki/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-loki/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
deleted file mode 100644
index 76b211bfcca2..000000000000
--- a/arch/arm/mach-loki/irq.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-loki/irq.c
- *
- * Marvell Loki (88RC8480) IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/irq.h>
-#include "common.h"
-
-void __init loki_init_irq(void)
-{
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
-}
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
deleted file mode 100644
index 35eae4e6abb2..000000000000
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/arm/mach-loki/lb88rc8480-setup.c
- *
- * Marvell LB88RC8480 Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/loki.h>
-#include "common.h"
-
-#define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
-#define LB88RC8480_FLASH_BOOT_CS_SIZE	SZ_128M
-
-#define LB88RC8480_NOR_BOOT_BASE	0xff000000
-#define LB88RC8480_NOR_BOOT_SIZE	SZ_16M
-
-static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
-	{
-		.name	= "kernel",
-		.offset	= 0,
-		.size	= SZ_2M,
-	}, {
-		.name	= "root-fs",
-		.offset	= SZ_2M,
-		.size	= (SZ_8M + SZ_4M + SZ_1M),
-	}, {
-		.name	= "u-boot",
-		.offset	= (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
-		.size	= SZ_1M,
-	},
-};
-
-static struct physmap_flash_data lb88rc8480_boot_flash_data = {
-	.parts		= lb88rc8480_boot_flash_parts,
-	.nr_parts	= ARRAY_SIZE(lb88rc8480_boot_flash_parts),
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource lb88rc8480_boot_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LB88RC8480_NOR_BOOT_BASE,
-	.end	= LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lb88rc8480_boot_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &lb88rc8480_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &lb88rc8480_boot_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-	.mac_addr	= { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
-};
-
-static void __init lb88rc8480_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	loki_init();
-
-	loki_ge0_init(&lb88rc8480_ge0_data);
-	loki_sas_init();
-	loki_uart0_init();
-	loki_uart1_init();
-
-	loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
-				LB88RC8480_FLASH_BOOT_CS_SIZE);
-	platform_device_register(&lb88rc8480_boot_flash);
-}
-
-MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
-	/* Maintainer: Ke Wei <kewei@marvell.com> */
-	.boot_params	= 0x00000100,
-	.init_machine	= lb88rc8480_init,
-	.map_io		= loki_map_io,
-	.init_early	= loki_init_early,
-	.init_irq	= loki_init_irq,
-	.timer		= &loki_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
deleted file mode 100644
index fdd8f5e96faf..000000000000
--- a/arch/arm/mach-s3c2400/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-menu "S3C2400 Machines"
-
-endmenu
diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile
deleted file mode 100644
index 7e23f4e13766..000000000000
--- a/arch/arm/mach-s3c2400/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# arch/arm/mach-s3c2400/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2400)	+= gpio.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
deleted file mode 100644
index 6c68e78f3595..000000000000
--- a/arch/arm/mach-s3c2400/gpio.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-s3c2400/gpio.c
- *
- * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
- *
- * S3C2400 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2400_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
-		return -EINVAL;  /* not valid interrupts */
-
-	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
-}
-
-EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
deleted file mode 100644
index 3fd889200e99..000000000000
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/map.h
- *
- * Copyright 2003-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright 2003, Lucas Correia Villa Real
- *
- * S3C2400 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C2400_PA_MEMCTRL	(0x14000000)
-#define S3C2400_PA_USBHOST	(0x14200000)
-#define S3C2400_PA_IRQ		(0x14400000)
-#define S3C2400_PA_DMA		(0x14600000)
-#define S3C2400_PA_CLKPWR	(0x14800000)
-#define S3C2400_PA_LCD		(0x14A00000)
-#define S3C2400_PA_UART		(0x15000000)
-#define S3C2400_PA_TIMER	(0x15100000)
-#define S3C2400_PA_USBDEV	(0x15200140)
-#define S3C2400_PA_WATCHDOG	(0x15300000)
-#define S3C2400_PA_IIC		(0x15400000)
-#define S3C2400_PA_IIS		(0x15508000)
-#define S3C2400_PA_GPIO		(0x15600000)
-#define S3C2400_PA_RTC		(0x15700040)
-#define S3C2400_PA_ADC		(0x15800000)
-#define S3C2400_PA_SPI		(0x15900000)
-
-#define S3C2400_PA_MMC		(0x15A00000)
-#define S3C2400_SZ_MMC		SZ_1M
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2400_CS0	(0x00000000)
-#define S3C2400_CS1	(0x02000000)
-#define S3C2400_CS2	(0x04000000)
-#define S3C2400_CS3	(0x06000000)
-#define S3C2400_CS4	(0x08000000)
-#define S3C2400_CS5	(0x0A000000)
-#define S3C2400_CS6	(0x0C000000)
-#define S3C2400_CS7	(0x0E000000)
-
-#define S3C2400_SDRAM_PA    (S3C2400_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA		S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD		S3C2400_PA_LCD
-#define S3C24XX_PA_UART		S3C2400_PA_UART
-#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC		S3C2400_PA_IIC
-#define S3C24XX_PA_IIS		S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC		S3C2400_PA_RTC
-#define S3C24XX_PA_ADC		S3C2400_PA_ADC
-#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index f453c4f2cb8e..bab139201761 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
 
 extern int s3c2410_gpio_getirq(unsigned int pin);
 
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
 /* s3c2410_gpio_irqfilter
  *
  * set the irq filtering on the given pin
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index a0a89d429296..cac1ad6b582c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -16,11 +16,7 @@
 
 #include <mach/gpio-nrs.h>
 
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_MISCCR		S3C2400_MISCCR
-#else
 #define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
 
 /* general configuration options */
 
@@ -42,67 +38,33 @@
 /* configure GPIO ports A..G */
 
 /* port A - S3C2410: 22bits, zero in bit X makes pin X output
- *          S3C2400: 18bits, zero in bit X makes pin X output
  * 1 makes port special function, this is default
 */
 #define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
-
 #define S3C2410_GPA0_ADDR0   (1<<0)
-
 #define S3C2410_GPA1_ADDR16  (1<<1)
-
 #define S3C2410_GPA2_ADDR17  (1<<2)
-
 #define S3C2410_GPA3_ADDR18  (1<<3)
-
 #define S3C2410_GPA4_ADDR19  (1<<4)
-
 #define S3C2410_GPA5_ADDR20  (1<<5)
-
 #define S3C2410_GPA6_ADDR21  (1<<6)
-
 #define S3C2410_GPA7_ADDR22  (1<<7)
-
 #define S3C2410_GPA8_ADDR23  (1<<8)
-
 #define S3C2410_GPA9_ADDR24  (1<<9)
-
 #define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE   (1<<10)
-
 #define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0  (1<<11)
-
 #define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2400_GPA12_nCAS1  (1<<12)
-
 #define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2400_GPA13_nGCS1  (1<<13)
-
 #define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2400_GPA14_nGCS2  (1<<14)
-
 #define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2400_GPA15_nGCS3  (1<<15)
-
 #define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2400_GPA16_nGCS4  (1<<16)
-
 #define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2400_GPA17_nGCS5  (1<<17)
-
 #define S3C2410_GPA18_ALE    (1<<18)
-
 #define S3C2410_GPA19_nFWE   (1<<19)
-
 #define S3C2410_GPA20_nFRE   (1<<20)
-
 #define S3C2410_GPA21_nRSTOUT (1<<21)
-
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -111,10 +73,6 @@
  * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
  *   00 = input, 01 = output, 10=special function, 11=reserved
 
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=data, 11=special function
-
  * bit 0,1 = pin 0, 2,3= pin 1...
  *
  * CPBUP = pull up resistor control, 1=disabled, 0=enabled
@@ -124,78 +82,35 @@
 #define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
 #define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
 
-#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
-
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
-#define S3C2400_GPB0_DATA16  (0x02 << 0)
 
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
-#define S3C2400_GPB1_DATA17  (0x02 << 2)
 
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
-#define S3C2400_GPB2_DATA18  (0x02 << 4)
-#define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
-#define S3C2400_GPB3_DATA19  (0x02 << 6)
-#define S3C2400_GPB3_TXD1    (0x03 << 6)
 
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
-#define S3C2400_GPB4_RXD1    (0x03 << 8)
-#define S3C2400_GPB4_MASK    (0x03 << 8)
 
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
-#define S3C2400_GPB5_DATA21  (0x02 << 10)
-#define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
-#define S3C2400_GPB6_DATA22  (0x02 << 12)
-#define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
-#define S3C2400_GPB7_DATA23  (0x02 << 14)
 
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24  (0x02 << 16)
 
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
-#define S3C2400_GPB9_DATA25  (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS    (0x03 << 20)
-
-#define S3C2400_GPB11_INP    (0x00 << 22)
-#define S3C2400_GPB11_OUTP   (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12_INP    (0x00 << 24)
-#define S3C2400_GPB12_OUTP   (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13_INP    (0x00 << 26)
-#define S3C2400_GPB13_OUTP   (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14_INP    (0x00 << 28)
-#define S3C2400_GPB14_OUTP   (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15_INP    (0x00 << 30)
-#define S3C2400_GPB15_OUTP   (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
 
 #define S3C2410_GPB_PUPDIS(x)  (1<<(x))
 
@@ -208,59 +123,22 @@
 #define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
 #define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
-
 #define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2400_GPC0_VD0 	(0x02 << 0)
-
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2400_GPC1_VD1 	(0x02 << 2)
-
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2400_GPC2_VD2  	(0x02 << 4)
-
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2400_GPC3_VD3   	(0x02 << 6)
-
 #define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2400_GPC4_VD4	(0x02 << 8)
-
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2400_GPC5_VD5   	(0x02 << 10)
-
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2400_GPC6_VD6   	(0x02 << 12)
-
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2400_GPC7_VD7   	(0x02 << 14)
-
 #define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2400_GPC8_VD8	(0x02 << 16)
-
 #define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2400_GPC9_VD9	(0x02 << 18)
-
 #define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2400_GPC10_VD10	(0x02 << 20)
-
 #define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2400_GPC11_VD11	(0x02 << 22)
-
 #define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2400_GPC12_VD12	(0x02 << 24)
-
 #define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2400_GPC13_VD13	(0x02 << 26)
-
 #define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2400_GPC14_VD14	(0x02 << 28)
-
 #define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2400_GPC15_VD15	(0x02 << 30)
-
 #define S3C2410_GPC_PUPDIS(x)  (1<<(x))
 
 /*
@@ -269,8 +147,6 @@
  * almost identical setup to port b, but the special functions are mostly
  * to do with the video system's data.
  *
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
  * almost identical setup to port c
 */
 
@@ -278,46 +154,31 @@
 #define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
 #define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
 
-#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
-
 #define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
 #define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
 #define S3C2410_GPD2_VD10	(0x02 << 4)
-#define S3C2400_GPD2_VLINE	(0x02 << 4)
 
 #define S3C2410_GPD3_VD11	(0x02 << 6)
-#define S3C2400_GPD3_VCLK	(0x02 << 6)
 
 #define S3C2410_GPD4_VD12	(0x02 << 8)
-#define S3C2400_GPD4_LEND	(0x02 << 8)
 
 #define S3C2410_GPD5_VD13	(0x02 << 10)
-#define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
 #define S3C2410_GPD6_VD14	(0x02 << 12)
-#define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
 #define S3C2410_GPD7_VD15	(0x02 << 14)
-#define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2400_GPD8_TOUT3	(0x02 << 16)
 #define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2400_GPD10_nWAIT	(0x02 << 20)
 #define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
@@ -340,9 +201,6 @@
  * again, the same as port B, but dealing with I2S, SDI, and
  * more miscellaneous functions
  *
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
  * GPIO / interrupt inputs
 */
 
@@ -350,74 +208,51 @@
 #define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
 #define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
 
-#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
-
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2400_GPE1_EINT1     (0x02 << 2)
-#define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2     (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2400_GPE3_EINT3     (0x02 << 6)
-#define S3C2400_GPE3_nCTS1     (0x03 << 6)
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2400_GPE4_EINT4     (0x02 << 8)
-#define S3C2400_GPE4_nRTS1     (0x03 << 8)
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2400_GPE5_EINT5     (0x02 << 10)
-#define S3C2400_GPE5_TCLK1     (0x03 << 10)
 #define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
 
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_SDI    (0x03 << 12)
-#define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDO    (0x03 << 14)
-#define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
-#define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
@@ -447,9 +282,6 @@
  *
  * pull up works like all other ports.
  *
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
  * GPIO/serial/misc pins
 */
 
@@ -457,37 +289,14 @@
 #define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
 #define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
 
-#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
-
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2400_GPF0_RXD0   (0x02 << 0)
-
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2400_GPF1_RXD1   (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2400_GPF2_TXD0   (0x02 << 4)
-
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2400_GPF3_TXD1   (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2400_GPF4_nRTS0  (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2400_GPF5_nCTS0  (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
-
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
 
 /* S3C2410:
@@ -497,62 +306,38 @@
  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
  *
  * pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
 */
 
 #define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
 #define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
 #define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
 
-#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
-
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
-#define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
-#define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
-#define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
-#define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
-#define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
-#define S3C2400_GPG9_SPICLK   (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
@@ -660,7 +445,6 @@
 #define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
 
 /* miscellaneous control */
-#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
 #define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
 
@@ -674,14 +458,6 @@
 #define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
 #define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
 
-#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
-
 #define S3C2410_MISCCR_USBDEV	    (0<<3)
 #define S3C2410_MISCCR_USBHOST	    (1<<3)
 
@@ -728,7 +504,6 @@
  *
  * Samsung datasheet p9-25
 */
-#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
 #define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
 #define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
 #define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
@@ -796,22 +571,6 @@
 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)
 #define S3C2410_GSTATUS2_PONRESET  (1<<0)
 
-/* open drain control register */
-#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
-
 /* 2412/2413 sleep configuration registers */
 
 #define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 988a6863e54b..e0c67b0163d8 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -145,29 +145,8 @@
 #define S3C2410_BANKCON_Tacs_SHIFT	(13)
 
 #define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
 #define S3C2410_BANKCON_SDRAM		(0x3 << 15)
 
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
-
 /* next bits only for SDRAM in 6,7 */
 #define S3C2410_BANKCON_Trcd2		(0x00 << 2)
 #define S3C2410_BANKCON_Trcd3		(0x01 << 2)
@@ -194,12 +173,6 @@
 #define S3C2410_REFRESH_TRP_3clk	(1<<20)
 #define S3C2410_REFRESH_TRP_4clk	(2<<20)
 
-#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
 #define S3C2410_REFRESH_TSRC_MASK	(3<<18)
 #define S3C2410_REFRESH_TSRC_4clk	(0<<18)
 #define S3C2410_REFRESH_TSRC_5clk	(1<<18)
@@ -222,7 +195,6 @@
 #define S3C2410_BANKSIZE_4M		(0x5 << 0)
 #define S3C2410_BANKSIZE_2M		(0x4 << 0)
 #define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
 #define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
 #define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
 #define S3C2410_BANKSIZE_BURST		(1<<7)
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index e82ab4aa7ab9..c2cf4e569989 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -15,7 +15,7 @@ config CPU_S3C2412
 
 config CPU_S3C2412_ONLY
 	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+	depends on ARCH_S3C2410 && !CPU_S3C2410 && \
 		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
deleted file mode 100644
index 0c5a73805560..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	.macro addruart, rp, rv
-		ldr	\rp, = S3C24XX_PA_UART
-		ldr	\rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
deleted file mode 100644
index 4326c30fabcb..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c24a0/include/mach/io.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S3C24A0
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
deleted file mode 100644
index 83ce2a7a9dae..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/irqs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_24A0_IRQS_H
-#define __ASM_ARCH_24A0_IRQS_H __FILE__
-
-#define IRQ_EINT0t2	S3C2410_IRQ(0)	/* 16 */
-/* for generic entry-macro.S */
-#define IRQ_EINT0	IRQ_EINT0t2
-
-#define IRQ_EINT3t6	S3C2410_IRQ(1)
-#define IRQ_EINT7t10	S3C2410_IRQ(2)
-#define IRQ_EINT11t14	S3C2410_IRQ(3)
-#define IRQ_EINT15t18	S3C2410_IRQ(4)	/* 20 */
-#define IRQ_TICK	S3C2410_IRQ(5)
-#define IRQ_DCTQ	S3C2410_IRQ(6)
-#define IRQ_MC		S3C2410_IRQ(7)
-#define IRQ_ME		S3C2410_IRQ(8)	/* 24 */
-#define IRQ_KEYPAD	S3C2410_IRQ(9)
-#define IRQ_TIMER0	S3C2410_IRQ(10)
-#define IRQ_TIMER1	S3C2410_IRQ(11)
-#define IRQ_TIMER2	S3C2410_IRQ(12)
-#define IRQ_TIMER3_4	S3C2410_IRQ(13)
-#define IRQ_OS_TIMER	IRQ_TIMER3_4
-#define IRQ_LCD		S3C2410_IRQ(14)
-#define IRQ_CAM_C	S3C2410_IRQ(15)
-#define IRQ_WDT_BATFLT	S3C2410_IRQ(16)	/* 32 */
-#define IRQ_UART0	S3C2410_IRQ(17)
-#define IRQ_CAM_P	S3C2410_IRQ(18)
-#define IRQ_MODEM	S3C2410_IRQ(19)
-#define IRQ_DMA		S3C2410_IRQ(20)
-#define IRQ_SDI		S3C2410_IRQ(21)
-#define IRQ_SPI0	S3C2410_IRQ(22)
-#define IRQ_UART1	S3C2410_IRQ(23)
-#define IRQ_AC97_NFLASH	S3C2410_IRQ(24)	/* 40 */
-#define IRQ_USBD	S3C2410_IRQ(25)
-#define IRQ_USBH	S3C2410_IRQ(26)
-#define IRQ_IIC		S3C2410_IRQ(27)
-#define IRQ_IRDA_MSTICK	S3C2410_IRQ(28)	/* 44 */
-#define IRQ_VLX_SPI1	S3C2410_IRQ(29)
-#define IRQ_RTC		S3C2410_IRQ(30)	/* 46 */
-#define IRQ_ADC_PEN     S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT00	S3C2410_IRQ(32)	/* 48 */
-#define IRQ_EINT1	S3C2410_IRQ(33)
-#define IRQ_EINT2	S3C2410_IRQ(34)
-#define IRQ_EINT3	S3C2410_IRQ(35)
-#define IRQ_EINT4	S3C2410_IRQ(36)
-#define IRQ_EINT5	S3C2410_IRQ(37)
-#define IRQ_EINT6	S3C2410_IRQ(38)
-#define IRQ_EINT7	S3C2410_IRQ(39)
-#define IRQ_EINT8	S3C2410_IRQ(40)
-#define IRQ_EINT9	S3C2410_IRQ(41)
-#define IRQ_EINT10	S3C2410_IRQ(42)
-#define IRQ_EINT11	S3C2410_IRQ(43)
-#define IRQ_EINT12	S3C2410_IRQ(44)
-#define IRQ_EINT13	S3C2410_IRQ(45)
-#define IRQ_EINT14	S3C2410_IRQ(46)
-#define IRQ_EINT15	S3C2410_IRQ(47)
-#define IRQ_EINT16	S3C2410_IRQ(48)
-#define IRQ_EINT17	S3C2410_IRQ(49)
-#define IRQ_EINT18	S3C2410_IRQ(50)
-
-#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
-
-/* SUB IRQS */
-#define IRQ_S3CUART_RX0		S3C2410_IRQ(51)	/* 67 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQ(52)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQ(53)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQ(54)
-#define IRQ_S3CUART_TX1		S3C2410_IRQ(55)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQ(56)
-
-#define IRQ_S3CUART_RX2		(0x0)
-#define IRQ_S3CUART_TX2		(0x0)
-#define IRQ_S3CUART_ERR2	(0x0)
-
-
-#define IRQ_IRDA	S3C2410_IRQ(57)
-#define IRQ_MSTICK	S3C2410_IRQ(58)
-#define IRQ_RESERVED0	S3C2410_IRQ(59)
-#define IRQ_RESERVED1	S3C2410_IRQ(60)
-#define IRQ_RESERVED2	S3C2410_IRQ(61)
-#define IRQ_TIMER3	S3C2410_IRQ(62)
-#define IRQ_TIMER4	S3C2410_IRQ(63)
-#define IRQ_WDT		S3C2410_IRQ(64)
-#define IRQ_BATFLT	S3C2410_IRQ(65)
-#define IRQ_POST	S3C2410_IRQ(66)
-#define IRQ_DISP_FIFO	S3C2410_IRQ(67)
-#define IRQ_PENUP	S3C2410_IRQ(68)
-#define IRQ_PENDN	S3C2410_IRQ(69)
-#define IRQ_ADC		S3C2410_IRQ(70)
-#define IRQ_DISP_FRAME	S3C2410_IRQ(71)
-#define IRQ_NFLASH	S3C2410_IRQ(72)
-#define IRQ_AC97	S3C2410_IRQ(73)
-#define IRQ_SPI1	S3C2410_IRQ(74)
-#define IRQ_VLX		S3C2410_IRQ(75)
-#define IRQ_DMA0	S3C2410_IRQ(76)
-#define IRQ_DMA1	S3C2410_IRQ(77)
-#define IRQ_DMA2	S3C2410_IRQ(78)
-#define IRQ_DMA3	S3C2410_IRQ(79)
-
-#define IRQ_TC		(0x0)
-
-#define NR_IRQS		(IRQ_DMA3+1)
-
-#endif /* __ASM_ARCH_24A0_IRQS_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
deleted file mode 100644
index d88c8b24fe34..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
- *
- * Copyright 2003-2007  Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24A0 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_24A0_MAP_H
-#define __ASM_ARCH_24A0_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map.h>
-
-#define S3C24A0_PA_IO_BASE	(0x40000000)
-#define S3C24A0_PA_CLKPWR	(0x40000000)
-#define S3C24A0_PA_IRQ		(0x40200000)
-#define S3C24A0_PA_DMA		(0x40400000)
-#define S3C24A0_PA_MEMCTRL	(0x40C00000)
-#define S3C24A0_PA_NAND		(0x40C00000)
-#define S3C24A0_PA_SROM		(0x40C20000)
-#define S3C24A0_PA_SDRAM	(0x40C40000)
-#define S3C24A0_PA_BUSM		(0x40CE0000)
-#define S3C24A0_PA_USBHOST	(0x41000000)
-#define S3C24A0_PA_MODEMIF	(0x41180000)
-#define S3C24A0_PA_IRDA		(0x41800000)
-#define S3C24A0_PA_TIMER	(0x44000000)
-#define S3C24A0_PA_WATCHDOG	(0x44100000)
-#define S3C24A0_PA_RTC		(0x44200000)
-#define S3C24A0_PA_UART		(0x44400000)
-#define S3C24A0_PA_UART0	(S3C24A0_PA_UART)
-#define S3C24A0_PA_UART1	(S3C24A0_PA_UART + 0x4000)
-#define S3C24A0_PA_SPI		(0x44500000)
-#define S3C24A0_PA_IIC		(0x44600000)
-#define S3C24A0_PA_IIS		(0x44700000)
-#define S3C24A0_PA_GPIO		(0x44800000)
-#define S3C24A0_PA_KEYIF	(0x44900000)
-#define S3C24A0_PA_USBDEV	(0x44A00000)
-#define S3C24A0_PA_AC97		(0x45000000)
-#define S3C24A0_PA_ADC		(0x45800000)
-#define S3C24A0_PA_SDI		(0x46000000)
-#define S3C24A0_PA_MS		(0x46100000)
-#define S3C24A0_PA_LCD		(0x4A000000)
-#define S3C24A0_PA_VPOST	(0x4A100000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C24A0_CS0	(0x00000000)
-#define S3C24A0_CS1	(0x04000000)
-#define S3C24A0_CS2	(0x08000000)
-#define S3C24A0_CS3	(0x0C000000)
-#define S3C24A0_CS4	(0x10000000)
-#define S3C24A0_CS5	(0x40000000)
-
-#define S3C24A0_SDRAM_PA	(S3C24A0_CS4)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ		S3C24A0_PA_IRQ
-#define S3C24XX_PA_MEMCTRL	S3C24A0_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST	S3C24A0_PA_USBHOST
-#define S3C24XX_PA_DMA		S3C24A0_PA_DMA
-#define S3C24XX_PA_CLKPWR	S3C24A0_PA_CLKPWR
-#define S3C24XX_PA_LCD		S3C24A0_PA_LCD
-#define S3C24XX_PA_UART		S3C24A0_PA_UART
-#define S3C24XX_PA_TIMER	S3C24A0_PA_TIMER
-#define S3C24XX_PA_USBDEV	S3C24A0_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG	S3C24A0_PA_WATCHDOG
-#define S3C24XX_PA_IIS		S3C24A0_PA_IIS
-#define S3C24XX_PA_GPIO		S3C24A0_PA_GPIO
-#define S3C24XX_PA_RTC		S3C24A0_PA_RTC
-#define S3C24XX_PA_ADC		S3C24A0_PA_ADC
-#define S3C24XX_PA_SPI		S3C24A0_PA_SPI
-#define S3C24XX_PA_SDI		S3C24A0_PA_SDI
-#define S3C24XX_PA_NAND		S3C24A0_PA_NAND
-
-#define S3C_PA_UART		S3C24A0_PA_UART
-#define S3C_PA_IIC		S3C24A0_PA_IIC
-#define S3C_PA_NAND		S3C24XX_PA_NAND
-
-#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
deleted file mode 100644
index 7d208a71b172..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_24A0_MEMORY_H
-#define __ASM_ARCH_24A0_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-#define __pfn_to_bus(x) __pfn_to_phys(x)
-#define __bus_to_pfn(x)	__phys_to_pfn(x)
-
-#endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
deleted file mode 100644
index be0af518b488..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24A0 clock register definitions
-*/
-
-#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
-#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
-
-#define S3C24A0_MPLLCON		S3C2410_CLKREG(0x10)
-#define S3C24A0_UPLLCON		S3C2410_CLKREG(0x14)
-#define S3C24A0_CLKCON		S3C2410_CLKREG(0x20)
-#define S3C24A0_CLKSRC		S3C2410_CLKREG(0x24)
-#define S3C24A0_CLKDIVN		S3C2410_CLKREG(0x28)
-
-/* CLKCON register bits */
-
-#define S3C24A0_CLKCON_VLX	(1<<29)
-#define S3C24A0_CLKCON_VPOST	(1<<28)
-#define S3C24A0_CLKCON_WDT	(1<<27)	/* reserved */
-#define S3C24A0_CLKCON_MPEGDCTQ	(1<<26)
-#define S3C24A0_CLKCON_VPOSTIF	(1<<25)
-#define S3C24A0_CLKCON_MPEG4IF	(1<<24)
-#define S3C24A0_CLKCON_CAM_UPLL	(1<<23)
-#define S3C24A0_CLKCON_LCDC	(1<<22)
-#define S3C24A0_CLKCON_CAM_HCLK	(1<<21)
-#define S3C24A0_CLKCON_MPEG4	(1<<20)
-#define S3C24A0_CLKCON_KEYPAD	(1<<19)
-#define S3C24A0_CLKCON_ADC	(1<<18)
-#define S3C24A0_CLKCON_SDI	(1<<17)
-#define S3C24A0_CLKCON_MS	(1<<16) /* memory stick */
-#define S3C24A0_CLKCON_USBD	(1<<15)
-#define S3C24A0_CLKCON_GPIO	(1<<14)
-#define S3C24A0_CLKCON_IIS	(1<<13)
-#define S3C24A0_CLKCON_IIC	(1<<12)
-#define S3C24A0_CLKCON_SPI	(1<<11)
-#define S3C24A0_CLKCON_UART1	(1<<10)
-#define S3C24A0_CLKCON_UART0	(1<<9)
-#define S3C24A0_CLKCON_PWMT	(1<<8)
-#define S3C24A0_CLKCON_USBH	(1<<7)
-#define S3C24A0_CLKCON_AC97	(1<<6)
-#define S3C24A0_CLKCON_IrDA	(1<<4)
-#define S3C24A0_CLKCON_IDLE	(1<<2)
-#define S3C24A0_CLKCON_MON	(1<<1)
-#define S3C24A0_CLKCON_STOP	(1<<0)
-
-/* CLKSRC register bits */
-
-#define S3C24A0_CLKSRC_OSC	(1<<8)  /* CLKSRC */
-#define S3C24A0_CLKSRC_UPLL	(1<<7)
-#define S3C24A0_CLKSRC_MPLL	(1<<5)
-#define S3C24A0_CLKSRC_EXT	(1<<4)
-
-/* Use a single interface with the common code, for s3c24xx */
-
-#define S3C2410_MPLLCON		S3C24A0_MPLLCON
-#define S3C2410_UPLLCON		S3C24A0_UPLLCON
-#define S3C2410_CLKCON		S3C24A0_CLKCON
-#define S3C2410_CLKSLOW		S3C24A0_CLKSRC
-#define S3C2410_CLKDIVN		S3C24A0_CLKDIVN
-
-#define S3C2410_CLKCON_IDLE	S3C24A0_CLKCON_IDLE
-#define S3C2410_CLKCON_POWER	S3C24A0_CLKCON_STOP
-#define S3C2410_CLKCON_LCDC	S3C24A0_CLKCON_LCDC
-#define S3C2410_CLKCON_USBH	S3C24A0_CLKCON_USBH
-#define S3C2410_CLKCON_USBD	S3C24A0_CLKCON_USBD
-#define S3C2410_CLKCON_PWMT	S3C24A0_CLKCON_PWMT
-#define S3C2410_CLKCON_SDI	S3C24A0_CLKCON_SDI
-#define S3C2410_CLKCON_UART0	S3C24A0_CLKCON_UART0
-#define S3C2410_CLKCON_UART1	S3C24A0_CLKCON_UART1
-#define S3C2410_CLKCON_GPIO	S3C24A0_CLKCON_GPIO
-#define S3C2410_CLKCON_ADC	S3C24A0_CLKCON_ADC
-#define S3C2410_CLKCON_IIC	S3C24A0_CLKCON_IIC
-#define S3C2410_CLKCON_IIS	S3C24A0_CLKCON_IIS
-#define S3C2410_CLKCON_SPI	S3C24A0_CLKCON_SPI
-
-#define S3C2410_CLKSLOW_UCLK_OFF	S3C24A0_CLKSRC_UPLL
-#define S3C2410_CLKSLOW_MPLL_OFF	S3C24A0_CLKSRC_MPLL
-#define S3C2410_CLKSLOW_SLOW		(0xFF)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	(0x1)
-
-#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
deleted file mode 100644
index 6086f6f189eb..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
-#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
-
-
-#define S3C2410_EINTMASK	S3C2410_EINTREG(0x034)
-#define S3C2410_EINTPEND	S3C2410_EINTREG(0X038)
-
-#define S3C24XX_EINTMASK	S3C24XX_EINTREG(0x034)
-#define S3C24XX_EINTPEND	S3C24XX_EINTREG(0X038)
-
-#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
-
-
-
diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h
deleted file mode 100644
index bd1bd1957656..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24A0 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/hardware.h>
-#include <asm/io.h>
-
-#include <mach/map.h>
-
-static void arch_idle(void)
-{
-	/* currently no specific idle support. */
-}
-
-void (*s3c24xx_reset_hook)(void);
-
-#include <asm/plat-s3c24xx/system-reset.h>
diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h
deleted file mode 100644
index 9dea8ba6fb72..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/tick.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24A0 - timer tick support
- */
-
-#define SUBSRC_TIMER4	(1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
-	return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
-}
diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h
deleted file mode 100644
index 98573424a016..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
deleted file mode 100644
index 6480b15277f3..000000000000
--- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
- *
- * Copyright 2008 Simtec Electronics <linux@simtec.co.uk>
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24A0 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d9c4096ebf45..8c5b3029b39f 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -4,7 +4,7 @@
 
 config PLAT_S3C24XX
 	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0
+	depends on ARCH_S3C2410
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4a10c0f684b2..c1fc6c6fac72 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -46,7 +46,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
 #include <plat/s3c2416.h>
@@ -55,7 +54,6 @@
 
 /* table of supported CPUs */
 
-static const char name_s3c2400[]  = "S3C2400";
 static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2416[]  = "S3C2416/S3C2450";
@@ -157,15 +155,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
 	},
-	{
-		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2400_map_io,
-		.init_clocks	= s3c2400_init_clocks,
-		.init_uarts	= s3c2400_init_uarts,
-		.init		= s3c2400_init,
-		.name		= name_s3c2400
-	},
 };
 
 /* minimal IO mapping */
@@ -200,11 +189,7 @@ static unsigned long s3c24xx_read_idcode_v5(void)
 
 static unsigned long s3c24xx_read_idcode_v4(void)
 {
-#ifndef CONFIG_CPU_S3C2400
 	return __raw_readl(S3C2410_GSTATUS1);
-#else
-	return 0UL;
-#endif
 }
 
 /* Hook for arm_pm_restart to ensure we execute the reset code
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
index a6f1d5df13b4..cc44e0e931e9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
@@ -64,14 +64,5 @@
 #define S3C2410_IISFCON_RXMASK	  (0x3f)
 #define S3C2410_IISFCON_RXSHIFT	  (0)
 
-#define S3C2400_IISFCON_TXDMA     (1<<11)
-#define S3C2400_IISFCON_RXDMA     (1<<10)
-#define S3C2400_IISFCON_TXENABLE  (1<<9)
-#define S3C2400_IISFCON_RXENABLE  (1<<8)
-#define S3C2400_IISFCON_TXMASK	  (0x07 << 4)
-#define S3C2400_IISFCON_TXSHIFT	  (4)
-#define S3C2400_IISFCON_RXMASK	  (0x07)
-#define S3C2400_IISFCON_RXSHIFT	  (0)
-
 #define S3C2410_IISFIFO  (0x10)
 #endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
index 2b35479ee35c..892e2f680fca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
@@ -67,7 +67,6 @@
 
 #define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
 #define S3C2410_SPPIN_RESERVED	  (1<<1)
-#define S3C2400_SPPIN_nCS     	  (1<<1)	/* SPI Card Select */
 #define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
 
 #define S3C2410_SPPRE	 (0x0C)
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
deleted file mode 100644
index b3feaea5c70b..000000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     09-Fev-2006 LCVR  First version, based on s3c2410.h
-*/
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern  int s3c2400_init(void);
-
-extern void s3c2400_map_io(void);
-
-extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2400_init_clocks(int xtal);
-
-#else
-#define s3c2400_init_clocks NULL
-#define s3c2400_init_uarts NULL
-#define s3c2400_map_io NULL
-#define s3c2400_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 3ad8386599c3..9a4e53d52967 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -140,7 +140,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
 
 /* Pull-{up,down} resistor controls.
  *
- * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2410,S3C2440 = Pull-UP,
  * S3C2412,S3C2413 = Pull-Down
  * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
  * S3C2443 = Pull-Both [not same as S3C6400]
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 116edfe120b9..bac36fa3becb 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -155,14 +155,6 @@
 #define S3C2410_UFSTAT_RXMASK	  (15<<0)
 #define S3C2410_UFSTAT_RXSHIFT	  (0)
 
-/* UFSTAT S3C24A0 */
-#define S3C24A0_UFSTAT_TXFULL	  (1 << 14)
-#define S3C24A0_UFSTAT_RXFULL	  (1 << 6)
-#define S3C24A0_UFSTAT_TXMASK	  (63 << 8)
-#define S3C24A0_UFSTAT_TXSHIFT	  (8)
-#define S3C24A0_UFSTAT_RXMASK	  (63)
-#define S3C24A0_UFSTAT_RXSHIFT	  (0)
-
 /* UFSTAT S3C2443 same as S3C2440 */
 #define S3C2440_UFSTAT_TXFULL	  (1<<14)
 #define S3C2440_UFSTAT_RXFULL	  (1<<6)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 636144cea932..8f41e1123461 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -457,7 +457,6 @@ config SERIAL_SAMSUNG_UARTS_4
 config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_SAMSUNG
-	default 2 if ARCH_S3C2400
 	default 6 if ARCH_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
@@ -489,13 +488,6 @@ config SERIAL_SAMSUNG_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_S3C2400
-	tristate "Samsung S3C2410 Serial port support"
-	depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
-	default y if CPU_S3C2400
-	help
-	  Serial port support for the Samsung S3C2400 SoC
-
 config SERIAL_S3C2410
 	tristate "Samsung S3C2410 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S3C2410
@@ -519,13 +511,6 @@ config SERIAL_S3C2440
 	help
 	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
 
-config SERIAL_S3C24A0
-	tristate "Samsung S3C24A0 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C24A0
-	default y if CPU_S3C24A0
-	help
-	  Serial port support for the Samsung S3C24A0 SoC
-
 config SERIAL_S3C6400
 	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index cb2628fee4c7..83b4da6a1062 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -38,11 +38,9 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
diff --git a/drivers/tty/serial/s3c2400.c b/drivers/tty/serial/s3c2400.c
deleted file mode 100644
index d13051b3df87..000000000000
--- a/drivers/tty/serial/s3c2400.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Driver for Samsung SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2400_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	clk->divisor = 1;
-	clk->name = "pclk";
-
-	return 0;
-}
-
-static int s3c2400_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	return 0;
-}
-
-static int s3c2400_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2400_uart_inf = {
-	.name		= "Samsung S3C2400 UART",
-	.type		= PORT_S3C2400,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2400_serial_getsource,
-	.set_clksrc	= s3c2400_serial_setsource,
-	.reset_port	= s3c2400_serial_resetport,
-};
-
-static int s3c2400_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
-}
-
-static struct platform_driver s3c2400_serial_driver = {
-	.probe		= s3c2400_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c2400-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
-
-static inline int s3c2400_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
-}
-
-static inline void s3c2400_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2400_serial_driver);
-}
-
-module_init(s3c2400_serial_init);
-module_exit(s3c2400_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2400-uart");
diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c
deleted file mode 100644
index 914eff22e499..000000000000
--- a/drivers/tty/serial/s3c24a0.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Driver for Samsung S3C24A0 SoC onboard UARTs.
- *
- * Based on drivers/serial/s3c2410.c
- *
- * Author: Sandeep Patil <sandeep.patil@azingo.com>
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c24a0_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2410_UCON_UCLK;
-	else
-		ucon &= ~S3C2410_UCON_UCLK;
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-static int s3c24a0_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	clk->divisor = 1;
-	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
-	return 0;
-}
-
-static int s3c24a0_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c24a0_uart_inf = {
-	.name		= "Samsung S3C24A0 UART",
-	.type		= PORT_S3C2410,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C24A0_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C24A0_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C24A0_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C24A0_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C24A0_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C24A0_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c24a0_serial_getsource,
-	.set_clksrc	= s3c24a0_serial_setsource,
-	.reset_port	= s3c24a0_serial_resetport,
-};
-
-static int s3c24a0_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
-}
-
-static struct platform_driver s3c24a0_serial_driver = {
-	.probe		= s3c24a0_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c24a0-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-
-static int __init s3c24a0_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-}
-
-static void __exit s3c24a0_serial_exit(void)
-{
-	platform_driver_unregister(&s3c24a0_serial_driver);
-}
-
-module_init(s3c24a0_serial_init);
-module_exit(s3c24a0_serial_exit);
-
author	Linus Torvalds <torvalds@linux-foundation.org>	2011-07-25 12:43:28 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2011-07-25 12:43:28 -0700
commit	4b478cedcdc1b2d131170f22bd3f916e53472f52 (patch)
tree	4a458a850d99fe3e2768fc62b2e3761c85ea05c2
parent	ae4c42e4e4d76d003f8ca551fe1aef93ff9a4b21 (diff)
parent	c8b7d43b6d539218c36f0ac8a6ad434b93195703 (diff)
download	linux-4b478cedcdc1b2d131170f22bd3f916e53472f52.tar.gz