Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number of bugfixes, again nothing serious.

   - Alexander Dahl found multiple bugs in the Atmel memory interface
     driver

   - A randconfig build fix for at91 was incomplete, the second attempt
     fixes the remaining corner case

   - One fix for the TI Keystone queue handler

   - The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: add needs-hpd for Odroid-XU3/4
  ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
  soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
  memory: atmel-ebi: Fix smc cycle xlate converter
  memory: atmel-ebi: Allow t_DF timings of zero ns
  memory: atmel-ebi: Fix smc timing return value evaluation

6 files changed, 24 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index f92f95741207..a183b56283f8 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -266,6 +266,7 @@
 
 &hdmicec {
 	status = "okay";
+	needs-hpd;
 };
 
 &hsi2c_4 {
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d735e5fc4772..195da38cb9a2 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,7 +1,7 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
 	select COMMON_CLK_AT91
 	select GPIOLIB
 	select PINCTRL
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 667fddac3856..5036f996e694 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -608,6 +608,9 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 void __init at91rm9200_pm_init(void)
 {
+	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
+		return;
+
 	at91_dt_ramc();
 
 	/*
@@ -620,18 +623,27 @@ void __init at91rm9200_pm_init(void)
 
 void __init at91sam9_pm_init(void)
 {
+	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+		return;
+
 	at91_dt_ramc();
 	at91_pm_init(at91sam9_idle);
 }
 
 void __init sama5_pm_init(void)
 {
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
+		return;
+
 	at91_dt_ramc();
 	at91_pm_init(NULL);
 }
 
 void __init sama5d2_pm_init(void)
 {
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+		return;
+
 	at91_pm_backup_init();
 	sama5_pm_init();
 }
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 99e644cda4d1..ebf69ff48ae2 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -72,7 +72,7 @@ struct atmel_smc_timing_xlate {
 	{ .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos}
 
 #define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\
-	{ .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos}
 
 static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
 				    struct atmel_ebi_dev_config *conf)
@@ -120,12 +120,14 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
 	if (!ret) {
 		required = true;
 		ncycles = DIV_ROUND_UP(val, clk_period_ns);
-		if (ncycles > ATMEL_SMC_MODE_TDF_MAX ||
-		    ncycles < ATMEL_SMC_MODE_TDF_MIN) {
+		if (ncycles > ATMEL_SMC_MODE_TDF_MAX) {
 			ret = -EINVAL;
 			goto out;
 		}
 
+		if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
+			ncycles = ATMEL_SMC_MODE_TDF_MIN;
+
 		smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles);
 	}
 
@@ -263,7 +265,7 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
 	}
 
 	ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
-	if (ret)
+	if (ret < 0)
 		return -EINVAL;
 
 	if ((ret > 0 && !required) || (!ret && required)) {
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
index 954cf0f66a31..20cc0ea470fa 100644
--- a/drivers/mfd/atmel-smc.c
+++ b/drivers/mfd/atmel-smc.c
@@ -206,7 +206,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
  *	     parameter
  *
  * This function encodes the @ncycles value as described in the datasheet
- * (section "SMC Pulse Register"), and then stores the result in the
+ * (section "SMC Cycle Register"), and then stores the result in the
  * @conf->setup field at @shift position.
  *
  * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 279e7c5551dd..39225de9d7f1 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -745,6 +745,9 @@ void *knav_pool_create(const char *name,
 	bool slot_found;
 	int ret;
 
+	if (!kdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
 	if (!kdev->dev)
 		return ERR_PTR(-ENODEV);