Merge 3.4-rc5 into staging-next

This resolves the conflict in:
	drivers/staging/vt6656/ioctl.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

447 files changed, 11950 insertions, 13124 deletions

diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 46a995d6d261..2ce4dadaf3f5 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -108,7 +108,7 @@ Description:
 		physically equivalent inputs when non differential readings are
 		separately available. In differential only parts, then all that
 		is required is a consistent labeling.  Units after application
-		of scale and offset are nanofarads..
+		of scale and offset are nanofarads.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
@@ -119,7 +119,7 @@ KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled no bias removal etc) temperature measurement.
-		It an axis is specified it generally means that the temperature
+		If an axis is specified it generally means that the temperature
 		sensor is associated with one part of a compound device (e.g.
 		a gyroscope axis). Units after application of scale and offset
 		are milli degrees Celsuis.
@@ -232,7 +232,7 @@ Description:
 		If known for a device, scale to be applied to <type>Y[_name]_raw
 		post addition of <type>[Y][_name]_offset in order to obtain the
 		measured value in <type> units as specified in
-		<type>[Y][_name]_raw documentation..  If shared across all in
+		<type>[Y][_name]_raw documentation.  If shared across all in
 		channels then Y and <x|y|z> are not present and the value is
 		called <type>[Y][_name]_scale. The peak modifier means this
 		value is applied to <type>Y[_name]_peak_raw values.
@@ -243,6 +243,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -258,6 +260,8 @@ What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -453,10 +457,14 @@ What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
+What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_tempY_raw_thresh_rising_value
 What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/in_illuminance0_thresh_falling_value
+what:		/sys/.../events/in_illuminance0_thresh_rising_value
+what:		/sys/.../events/in_proximity0_thresh_falling_value
+what:		/sys/.../events/in_proximity0_thresh_rising_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -490,9 +498,9 @@ What:		/sys/.../events/in_magn_z_raw_roc_rising_value
 What:		/sys/.../events/in_magn_z_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
+What:		/sys/.../events/in_voltageY_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_tempY_raw_roc_falling_value
+What:		/sys/.../events/in_tempY_raw_roc_rising_value
 What:		/sys/.../events/in_tempY_raw_roc_falling_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
@@ -556,6 +564,8 @@ What:		/sys/.../events/in_tempY_thresh_falling_period
 What:		/sys/.../events/in_tempY_roc_rising_period
 What:		/sys/.../events/in_tempY_roc_falling_period
 What:		/sys/.../events/in_accel_x&y&z_mag_falling_period
+What:		/sys/.../events/in_intensity0_thresh_period
+What:		/sys/.../events/in_proximity0_thresh_period
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -718,24 +728,3 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute is used to read the amount of quadrature error
 		present in the device at a given time.
-
-What:		/sys/.../iio:deviceX/ac_excitation_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to enable the AC
-		excitation mode found on some converters. In ac excitation mode,
-		the polarity of the excitation voltage is reversed on
-		alternate cycles, to eliminate DC errors.
-
-What:		/sys/.../iio:deviceX/bridge_switch_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to close or open the
-		bridge power down switch found on some converters.
-		In bridge applications, such as strain gauges and load cells,
-		the bridge itself consumes the majority of the current in the
-		system. To minimize the current consumption of the system,
-		the bridge can be disconnected (when it is not being used
-		using the bridge_switch_en attribute.
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
new file mode 100644
index 000000000000..b3629d3a9adf
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC ADC controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-adc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The ADC interrupt
+
+Example:
+
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 0>;
+	};
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
new file mode 100644
index 000000000000..02ea23a63f20
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@@ -0,0 +1,26 @@
+* ST SPEAr ADC device driver
+
+Required properties:
+- compatible: Should be "st,spear600-adc"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the ADC interrupt
+- sampling-frequency: Default sampling frequency
+
+Optional properties:
+- vref-external: External voltage reference in milli-volts. If omitted
+  the internal voltage reference will be used.
+- average-samples: Number of samples to generate an average value. If
+  omitted, single data conversion will be used.
+
+Examples:
+
+	adc: adc@d8200000 {
+		compatible = "st,spear600-adc";
+		reg = <0xd8200000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <6>;
+		sampling-frequency = <5000000>;
+		vref-external = <2500>;	/* 2.5V VRef */
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index bb76fc42fc42..216dbf3febb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3384,6 +3384,7 @@ IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@cam.ac.uk>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
+F:	drivers/iio/
 F:	drivers/staging/iio/
 
 IKANOS/ADI EAGLE ADSL USB DRIVER
diff --git a/drivers/Kconfig b/drivers/Kconfig
index d236aef7e59f..e245779443da 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -140,4 +140,8 @@ source "drivers/virt/Kconfig"
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/iio/Kconfig"
+
+source "drivers/vme/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c82bf16..08b78e035468 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,3 +134,5 @@ obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
 obj-$(CONFIG_HYPERV)		+= hv/
 
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_IIO)		+= iio/
+obj-$(CONFIG_VME_BUS)		+= vme/
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
new file mode 100644
index 000000000000..3ab7d48d0b0a
--- /dev/null
+++ b/drivers/iio/Kconfig
@@ -0,0 +1,51 @@
+#
+# Industrial I/O subsytem configuration
+#
+
+menuconfig IIO
+	tristate "Industrial I/O support"
+	depends on GENERIC_HARDIRQS
+	help
+	  The industrial I/O subsystem provides a unified framework for
+	  drivers for many different types of embedded sensors using a
+	  number of different physical interfaces (i2c, spi, etc). See
+	  Documentation/iio for more information.
+
+if IIO
+
+config IIO_BUFFER
+	bool "Enable buffer support within IIO"
+	help
+	  Provide core support for various buffer based data
+	  acquisition methods.
+
+if IIO_BUFFER
+
+config IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	tristate "Industrial I/O buffering based on kfifo"
+	help
+	  A simple fifo based on kfifo.  Use this if you want a fifo
+	  rather than a ring buffer. Note that this currently provides
+	  no buffer events so it is up to userspace to work out how
+	  often to read from the buffer.
+
+endif # IIO_BUFFER
+
+config IIO_TRIGGER
+	boolean "Enable triggered sampling support"
+	help
+	  Provides IIO core support for triggers.  Currently these
+	  are used to initialize capture of samples to push into
+	  ring buffers.  The triggers are effectively a 'capture
+	  data now' interrupt.
+
+config IIO_CONSUMERS_PER_TRIGGER
+       int "Maximum number of consumers per trigger"
+       depends on IIO_TRIGGER
+       default "2"
+       help
+	This value controls the maximum number of consumers that a
+	given trigger may handle. Default is 2.
+
+endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
new file mode 100644
index 000000000000..d5fc57d12eac
--- /dev/null
+++ b/drivers/iio/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the industrial I/O core.
+#
+
+obj-$(CONFIG_IIO) += industrialio.o
+industrialio-y := industrialio-core.o industrialio-event.o inkern.o
+industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
+industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+
+obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
diff --git a/drivers/staging/iio/iio_core.h b/drivers/iio/iio_core.h
index c9dfcba0bac8..f652e6ae5a35 100644
--- a/drivers/staging/iio/iio_core.h
+++ b/drivers/iio/iio_core.h
@@ -12,6 +12,12 @@
 
 #ifndef _IIO_CORE_H_
 #define _IIO_CORE_H_
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+struct iio_chan_spec;
+struct iio_dev;
+
 
 int __iio_add_chan_devattr(const char *postfix,
 			   struct iio_chan_spec const *chan,
diff --git a/drivers/staging/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h
index 6f7c56fcbe78..6f7c56fcbe78 100644
--- a/drivers/staging/iio/iio_core_trigger.h
+++ b/drivers/iio/iio_core_trigger.h
diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 386ba760f3f1..b5b2c38045c5 100644
--- a/drivers/staging/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -21,10 +21,10 @@
 #include <linux/slab.h>
 #include <linux/poll.h>
 
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "buffer.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 static const char * const iio_endian_prefix[] = {
 	[IIO_BE] = "be",
@@ -124,13 +124,15 @@ static ssize_t iio_scan_el_store(struct device *dev,
 				 const char *buf,
 				 size_t len)
 {
-	int ret = 0;
+	int ret;
 	bool state;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
@@ -169,17 +171,21 @@ static ssize_t iio_scan_el_ts_store(struct device *dev,
 				    const char *buf,
 				    size_t len)
 {
-	int ret = 0;
+	int ret;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	bool state;
 
-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
 	indio_dev->buffer->scan_timestamp = state;
+	indio_dev->scan_timestamp = state;
 error_ret:
 	mutex_unlock(&indio_dev->mlock);
 
@@ -291,7 +297,7 @@ int iio_buffer_register(struct iio_dev *indio_dev,
 				goto error_cleanup_dynamic;
 			attrcount += ret;
 			if (channels[i].type == IIO_TIMESTAMP)
-				buffer->scan_index_timestamp =
+				indio_dev->scan_index_timestamp =
 					channels[i].scan_index;
 		}
 		if (indio_dev->masklength && buffer->scan_mask == NULL) {
@@ -503,30 +509,41 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
 	return NULL;
 }
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask,
+				  bool timestamp)
 {
-	struct iio_buffer *buffer = indio_dev->buffer;
 	const struct iio_chan_spec *ch;
 	unsigned bytes = 0;
 	int length, i;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
 
 	/* How much space will the demuxed element take? */
-	for_each_set_bit(i, buffer->scan_mask,
+	for_each_set_bit(i, mask,
 			 indio_dev->masklength) {
 		ch = iio_find_channel_from_si(indio_dev, i);
-		length = ch->scan_type.storagebits/8;
+		length = ch->scan_type.storagebits / 8;
 		bytes = ALIGN(bytes, length);
 		bytes += length;
 	}
-	if (buffer->scan_timestamp) {
+	if (timestamp) {
 		ch = iio_find_channel_from_si(indio_dev,
-					      buffer->scan_index_timestamp);
-		length = ch->scan_type.storagebits/8;
+					      indio_dev->scan_index_timestamp);
+		length = ch->scan_type.storagebits / 8;
 		bytes = ALIGN(bytes, length);
 		bytes += length;
 	}
-	buffer->access->set_bytes_per_datum(buffer, bytes);
+	return bytes;
+}
+
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	dev_dbg(&indio_dev->dev, "%s\n", __func__);
+
+	/* How much space will the demuxed element take? */
+	indio_dev->scan_bytes =
+		iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
+				       buffer->scan_timestamp);
+	buffer->access->set_bytes_per_datum(buffer, indio_dev->scan_bytes);
 
 	/* What scan mask do we actually have ?*/
 	if (indio_dev->available_scan_masks)
@@ -638,19 +655,25 @@ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
 }
 EXPORT_SYMBOL_GPL(iio_push_to_buffer);
 
+static void iio_buffer_demux_free(struct iio_buffer *buffer)
+{
+	struct iio_demux_table *p, *q;
+	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
+		list_del(&p->l);
+		kfree(p);
+	}
+}
+
 int iio_update_demux(struct iio_dev *indio_dev)
 {
 	const struct iio_chan_spec *ch;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int ret, in_ind = -1, out_ind, length;
 	unsigned in_loc = 0, out_loc = 0;
-	struct iio_demux_table *p, *q;
+	struct iio_demux_table *p;
 
 	/* Clear out any old demux */
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
 	kfree(buffer->demux_bounce);
 	buffer->demux_bounce = NULL;
 
@@ -704,7 +727,7 @@ int iio_update_demux(struct iio_dev *indio_dev)
 			goto error_clear_mux_table;
 		}
 		ch = iio_find_channel_from_si(indio_dev,
-			buffer->scan_index_timestamp);
+			indio_dev->scan_index_timestamp);
 		length = ch->scan_type.storagebits/8;
 		if (out_loc % length)
 			out_loc += length - out_loc % length;
@@ -725,10 +748,8 @@ int iio_update_demux(struct iio_dev *indio_dev)
 	return 0;
 
 error_clear_mux_table:
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_update_demux);
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index d303bfbff27f..72e33b819f91 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -23,11 +23,11 @@
 #include <linux/slab.h>
 #include <linux/anon_inodes.h>
 #include <linux/debugfs.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /* IDA to assign each registered device a unique id*/
 static DEFINE_IDA(iio_ida);
@@ -42,11 +42,6 @@ EXPORT_SYMBOL(iio_bus_type);
 
 static struct dentry *iio_debugfs_dentry;
 
-static const char * const iio_data_type_name[] = {
-	[IIO_RAW] = "raw",
-	[IIO_PROCESSED] = "input",
-};
-
 static const char * const iio_direction[] = {
 	[0] = "in",
 	[1] = "out",
@@ -68,6 +63,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_ANGL] = "angl",
 	[IIO_TIMESTAMP] = "timestamp",
 	[IIO_CAPACITANCE] = "capacitance",
+	[IIO_ALTVOLTAGE] = "altvoltage",
 };
 
 static const char * const iio_modifier_names[] = {
@@ -80,6 +76,8 @@ static const char * const iio_modifier_names[] = {
 
 /* relies on pairs of these shared then separate */
 static const char * const iio_chan_info_postfix[] = {
+	[IIO_CHAN_INFO_RAW] = "raw",
+	[IIO_CHAN_INFO_PROCESSED] = "input",
 	[IIO_CHAN_INFO_SCALE] = "scale",
 	[IIO_CHAN_INFO_OFFSET] = "offset",
 	[IIO_CHAN_INFO_CALIBSCALE] = "calibscale",
@@ -90,6 +88,9 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
 	[IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
 	= "filter_low_pass_3db_frequency",
+	[IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
+	[IIO_CHAN_INFO_FREQUENCY] = "frequency",
+	[IIO_CHAN_INFO_PHASE] = "phase",
 };
 
 const struct iio_chan_spec
@@ -280,7 +281,7 @@ static ssize_t iio_read_channel_ext_info(struct device *dev,
 
 	ext_info = &this_attr->c->ext_info[this_attr->address];
 
-	return ext_info->read(indio_dev, this_attr->c, buf);
+	return ext_info->read(indio_dev, ext_info->private, this_attr->c, buf);
 }
 
 static ssize_t iio_write_channel_ext_info(struct device *dev,
@@ -294,7 +295,8 @@ static ssize_t iio_write_channel_ext_info(struct device *dev,
 
 	ext_info = &this_attr->c->ext_info[this_attr->address];
 
-	return ext_info->write(indio_dev, this_attr->c, buf, len);
+	return ext_info->write(indio_dev, ext_info->private,
+			       this_attr->c, buf, len);
 }
 
 static ssize_t iio_read_channel_info(struct device *dev,
@@ -575,25 +577,12 @@ error_ret:
 static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 					struct iio_chan_spec const *chan)
 {
-	int ret, i, attrcount = 0;
+	int ret, attrcount = 0;
+	int i;
 	const struct iio_chan_spec_ext_info *ext_info;
 
 	if (chan->channel < 0)
 		return 0;
-
-	ret = __iio_add_chan_devattr(iio_data_type_name[chan->processed_val],
-				     chan,
-				     &iio_read_channel_info,
-				     (chan->output ?
-				      &iio_write_channel_info : NULL),
-				     0,
-				     0,
-				     &indio_dev->dev,
-				     &indio_dev->channel_attr_list);
-	if (ret)
-		goto error_ret;
-	attrcount++;
-
 	for_each_set_bit(i, &chan->info_mask, sizeof(long)*8) {
 		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i/2],
 					     chan,
@@ -752,7 +741,7 @@ static struct device_type iio_dev_type = {
 	.release = iio_dev_release,
 };
 
-struct iio_dev *iio_allocate_device(int sizeof_priv)
+struct iio_dev *iio_device_alloc(int sizeof_priv)
 {
 	struct iio_dev *dev;
 	size_t alloc_size;
@@ -788,16 +777,16 @@ struct iio_dev *iio_allocate_device(int sizeof_priv)
 
 	return dev;
 }
-EXPORT_SYMBOL(iio_allocate_device);
+EXPORT_SYMBOL(iio_device_alloc);
 
-void iio_free_device(struct iio_dev *dev)
+void iio_device_free(struct iio_dev *dev)
 {
 	if (dev) {
 		ida_simple_remove(&iio_ida, dev->id);
 		kfree(dev);
 	}
 }
-EXPORT_SYMBOL(iio_free_device);
+EXPORT_SYMBOL(iio_device_free);
 
 /**
  * iio_chrdev_open() - chrdev file open for buffer access and ioctls
diff --git a/drivers/staging/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 5fdf739e38f9..5fcf50b1ae5a 100644
--- a/drivers/staging/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -20,10 +20,10 @@
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /**
  * struct iio_event_interface - chrdev interface for an event line
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 47ecadd4818d..1dbd7b86a694 100644
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -15,11 +15,11 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 
-#include "iio.h"
-#include "trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 
 /* RFC - Question of approach
  * Make the common case (single sensor single trigger)
@@ -360,9 +360,9 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 	indio_dev->trig = trig;
 
 	if (oldtrig && indio_dev->trig != oldtrig)
-		iio_put_trigger(oldtrig);
+		iio_trigger_put(oldtrig);
 	if (indio_dev->trig)
-		iio_get_trigger(indio_dev->trig);
+		iio_trigger_get(indio_dev->trig);
 
 	return len;
 }
@@ -426,7 +426,7 @@ static void iio_trig_subirqunmask(struct irq_data *d)
 	trig->subirqs[d->irq - trig->subirq_base].enabled = true;
 }
 
-struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
+struct iio_trigger *iio_trigger_alloc(const char *fmt, ...)
 {
 	va_list vargs;
 	struct iio_trigger *trig;
@@ -472,14 +472,14 @@ struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
 	}
 	return trig;
 }
-EXPORT_SYMBOL(iio_allocate_trigger);
+EXPORT_SYMBOL(iio_trigger_alloc);
 
-void iio_free_trigger(struct iio_trigger *trig)
+void iio_trigger_free(struct iio_trigger *trig)
 {
 	if (trig)
 		put_device(&trig->dev);
 }
-EXPORT_SYMBOL(iio_free_trigger);
+EXPORT_SYMBOL(iio_trigger_free);
 
 void iio_device_register_trigger_consumer(struct iio_dev *indio_dev)
 {
@@ -491,7 +491,7 @@ void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
 {
 	/* Clean up and associated but not attached triggers references */
 	if (indio_dev->trig)
-		iio_put_trigger(indio_dev->trig);
+		iio_trigger_put(indio_dev->trig);
 }
 
 int iio_triggered_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/inkern.c b/drivers/iio/inkern.c
index ef07a02bf542..922645893dc8 100644
--- a/drivers/staging/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -11,11 +11,11 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "machine.h"
-#include "driver.h"
-#include "consumer.h"
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/consumer.h>
 
 struct iio_map_internal {
 	struct iio_dev *indio_dev;
diff --git a/drivers/staging/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 9f3bd59c0e72..6bf9d05f4841 100644
--- a/drivers/staging/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -5,8 +5,7 @@
 #include <linux/workqueue.h>
 #include <linux/kfifo.h>
 #include <linux/mutex.h>
-
-#include "kfifo_buf.h"
+#include <linux/iio/kfifo_buf.h>
 
 struct iio_kfifo {
 	struct iio_buffer buffer;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c7795096d43b..c9104282ec95 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -506,4 +506,5 @@ source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
 source "drivers/misc/carma/Kconfig"
 source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/mei/Kconfig"
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3e1d80106f04..0f6af6a13345 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -49,3 +49,4 @@ obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
 obj-$(CONFIG_MAX8997_MUIC)	+= max8997-muic.o
+obj-$(CONFIG_INTEL_MEI)		+= mei/
diff --git a/drivers/staging/mei/Kconfig b/drivers/misc/mei/Kconfig
index 47d78a72db2e..47d78a72db2e 100644
--- a/drivers/staging/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
diff --git a/drivers/staging/mei/Makefile b/drivers/misc/mei/Makefile
index 57168db6c7e5..57168db6c7e5 100644
--- a/drivers/staging/mei/Makefile
+++ b/drivers/misc/mei/Makefile
diff --git a/drivers/staging/mei/TODO b/drivers/misc/mei/TODO
index fc266018355e..fc266018355e 100644
--- a/drivers/staging/mei/TODO
+++ b/drivers/misc/mei/TODO
diff --git a/drivers/staging/mei/hw.h b/drivers/misc/mei/hw.h
index 24c4c962819e..24c4c962819e 100644
--- a/drivers/staging/mei/hw.h
+++ b/drivers/misc/mei/hw.h
diff --git a/drivers/staging/mei/init.c b/drivers/misc/mei/init.c
index eab711fb5fc4..afb0a583b566 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -200,7 +200,7 @@ int mei_hw_init(struct mei_device *dev)
 		if (!(dev->me_hw_state & ME_RDY_HRA))
 			dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n");
 
-		printk(KERN_ERR "mei: link layer initialization failed.\n");
+		dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
 		ret = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/staging/mei/interface.c b/drivers/misc/mei/interface.c
index 9a2cfafc52a6..9a2cfafc52a6 100644
--- a/drivers/staging/mei/interface.c
+++ b/drivers/misc/mei/interface.c
diff --git a/drivers/staging/mei/interface.h b/drivers/misc/mei/interface.h
index fb90c6f8a759..0d0043575a2a 100644
--- a/drivers/staging/mei/interface.h
+++ b/drivers/misc/mei/interface.h
@@ -51,8 +51,7 @@ int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl);
 
 int mei_wd_send(struct mei_device *dev);
 int mei_wd_stop(struct mei_device *dev, bool preserve);
-bool mei_wd_host_init(struct mei_device *dev);
-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout);
+int mei_wd_host_init(struct mei_device *dev);
 /*
  * mei_watchdog_register  - Registering watchdog interface
  *   once we got connection to the WD Client
diff --git a/drivers/staging/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 2007d2447b1c..2007d2447b1c 100644
--- a/drivers/staging/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
diff --git a/drivers/staging/mei/iorw.c b/drivers/misc/mei/iorw.c
index 0a80dc4e62f3..0a80dc4e62f3 100644
--- a/drivers/staging/mei/iorw.c
+++ b/drivers/misc/mei/iorw.c
diff --git a/drivers/staging/mei/main.c b/drivers/misc/mei/main.c
index 7c9321fa7bb1..20f80dfcf319 100644
--- a/drivers/staging/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -14,6 +14,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -39,16 +41,7 @@
 #include "mei.h"
 #include "interface.h"
 
-
-#define MEI_READ_TIMEOUT 45
-#define MEI_DRIVER_NAME	"mei"
-#define MEI_DEV_NAME "mei"
-
-/*
- *  mei driver strings
- */
-static char mei_driver_name[] = MEI_DRIVER_NAME;
-static const char mei_driver_string[] = "Intel(R) Management Engine Interface";
+static const char mei_driver_name[] = "mei";
 
 /* The device pointer */
 /* Currently this driver works as long as there is only a single AMT device. */
@@ -931,7 +924,7 @@ static const struct file_operations mei_fops = {
  * Misc Device Struct
  */
 static struct miscdevice  mei_misc_device = {
-		.name = MEI_DRIVER_NAME,
+		.name = "mei",
 		.fops = &mei_fops,
 		.minor = MISC_DYNAMIC_MINOR,
 };
@@ -1020,7 +1013,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 
 	mutex_unlock(&mei_mutex);
 
-	pr_debug("mei: Driver initialization successful.\n");
+	pr_debug("initialization successful.\n");
 
 	return 0;
 
@@ -1204,7 +1197,7 @@ static int __init mei_init_module(void)
 {
 	int ret;
 
-	pr_debug("mei: %s\n", mei_driver_string);
+	pr_debug("loading.\n");
 	/* init pci module */
 	ret = pci_register_driver(&mei_driver);
 	if (ret < 0)
@@ -1226,7 +1219,7 @@ static void __exit mei_exit_module(void)
 	misc_deregister(&mei_misc_device);
 	pci_unregister_driver(&mei_driver);
 
-	pr_debug("mei: Driver unloaded successfully.\n");
+	pr_debug("unloaded successfully.\n");
 }
 
 module_exit(mei_exit_module);
diff --git a/drivers/staging/mei/mei-amt-version.c b/drivers/misc/mei/mei-amt-version.c
index ac2a507be253..ac2a507be253 100644
--- a/drivers/staging/mei/mei-amt-version.c
+++ b/drivers/misc/mei/mei-amt-version.c
diff --git a/drivers/staging/mei/mei.h b/drivers/misc/mei/mei.h
index bc0d8b69c49e..bc0d8b69c49e 100644
--- a/drivers/staging/mei/mei.h
+++ b/drivers/misc/mei/mei.h
diff --git a/drivers/staging/mei/mei.txt b/drivers/misc/mei/mei.txt
index 2785697da59d..2785697da59d 100644
--- a/drivers/staging/mei/mei.txt
+++ b/drivers/misc/mei/mei.txt
diff --git a/drivers/staging/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 10b1b4e2f8ac..10b1b4e2f8ac 100644
--- a/drivers/staging/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
diff --git a/drivers/staging/mei/wd.c b/drivers/misc/mei/wd.c
index cf4c29d10e7f..1e6285127e95 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -45,23 +45,22 @@ const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
 						0x9D, 0xA9, 0x15, 0x14, 0xCB,
 						0x32, 0xAB);
 
-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
+static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
 {
-	dev_dbg(&dev->pdev->dev, "timeout=%d.\n", timeout);
+	dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout);
 	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE);
-	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE,
-			&timeout, sizeof(u16));
+	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16));
 }
 
 /**
  * host_init_wd - mei initialization wd.
  *
  * @dev: the device structure
+ * returns -ENENT if wd client cannot be found
+ *         -EIO if write has failed
  */
-bool mei_wd_host_init(struct mei_device *dev)
+int mei_wd_host_init(struct mei_device *dev)
 {
-	bool ret = false;
-
 	mei_cl_init(&dev->wd_cl, dev);
 
 	/* look for WD client and connect to it */
@@ -72,25 +71,21 @@ bool mei_wd_host_init(struct mei_device *dev)
 	mei_find_me_client_update_filext(dev, &dev->wd_cl,
 				&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);
 
-	dev_dbg(&dev->pdev->dev, "check wd_cl\n");
-	if (MEI_FILE_CONNECTING == dev->wd_cl.state) {
-		if (mei_connect(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "Failed to connect to WD client\n");
-			dev->wd_cl.state = MEI_FILE_DISCONNECTED;
-			dev->wd_cl.host_client_id = 0;
-			ret = false;
-			goto end;
-		} else {
-			dev->wd_cl.timer_count = CONNECT_TIMEOUT;
-		}
-	} else {
-		dev_dbg(&dev->pdev->dev, "Failed to find WD client\n");
-		ret = false;
-		goto end;
+	dev_dbg(&dev->pdev->dev, "wd: check client\n");
+	if (MEI_FILE_CONNECTING != dev->wd_cl.state) {
+		dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
+		return -ENOENT;
 	}
 
-end:
-	return ret;
+	if (mei_connect(dev, &dev->wd_cl)) {
+		dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n");
+		dev->wd_cl.state = MEI_FILE_DISCONNECTED;
+		dev->wd_cl.host_client_id = 0;
+		return -EIO;
+	}
+	dev->wd_cl.timer_count = CONNECT_TIMEOUT;
+
+	return 0;
 }
 
 /**
@@ -159,7 +154,7 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 			if (ret)
 				goto out;
 		} else {
-			dev_dbg(&dev->pdev->dev, "send stop WD failed\n");
+			dev_err(&dev->pdev->dev, "wd: send stop failed\n");
 		}
 
 		dev->wd_pending = false;
@@ -173,13 +168,13 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 					dev->wd_stopped, 10 * HZ);
 	mutex_lock(&dev->device_lock);
 	if (dev->wd_stopped) {
-		dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+		dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
 		ret = 0;
 	} else {
 		if (!ret)
 			ret = -ETIMEDOUT;
 		dev_warn(&dev->pdev->dev,
-			"stop wd failed to complete ret=%d.\n", ret);
+			"wd: stop failed to complete ret=%d.\n", ret);
 	}
 
 	if (preserve)
@@ -208,13 +203,15 @@ static int mei_wd_ops_start(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);
 
 	if (dev->mei_state != MEI_ENABLED) {
-		dev_dbg(&dev->pdev->dev, "mei_state != MEI_ENABLED  mei_state= %d\n",
-		    dev->mei_state);
+		dev_dbg(&dev->pdev->dev,
+			"wd: mei_state != MEI_ENABLED  mei_state = %d\n",
+			dev->mei_state);
 		goto end_unlock;
 	}
 
 	if (dev->wd_cl.state != MEI_FILE_CONNECTED)	{
-		dev_dbg(&dev->pdev->dev, "MEI Driver is not connected to Watchdog Client\n");
+		dev_dbg(&dev->pdev->dev,
+			"MEI Driver is not connected to Watchdog Client\n");
 		goto end_unlock;
 	}
 
@@ -267,7 +264,7 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);
 
 	if (dev->wd_cl.state != MEI_FILE_CONNECTED) {
-		dev_dbg(&dev->pdev->dev, "wd is not connected.\n");
+		dev_err(&dev->pdev->dev, "wd: not connected.\n");
 		ret = -ENODEV;
 		goto end;
 	}
@@ -277,16 +274,17 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 		mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {
 
 		dev->mei_host_buffer_is_empty = false;
-		dev_dbg(&dev->pdev->dev, "sending watchdog ping\n");
+		dev_dbg(&dev->pdev->dev, "wd: sending ping\n");
 
 		if (mei_wd_send(dev)) {
-			dev_dbg(&dev->pdev->dev, "wd send failed.\n");
+			dev_err(&dev->pdev->dev, "wd: send failed.\n");
 			ret = -EIO;
 			goto end;
 		}
 
 		if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "mei_flow_ctrl_reduce() failed.\n");
+			dev_err(&dev->pdev->dev,
+				"wd: mei_flow_ctrl_reduce() failed.\n");
 			ret = -EIO;
 			goto end;
 		}
@@ -346,7 +344,7 @@ static const struct watchdog_info wd_info = {
 		.options = WDIOF_KEEPALIVEPING,
 };
 
-struct watchdog_device amt_wd_dev = {
+static struct watchdog_device amt_wd_dev = {
 		.info = &wd_info,
 		.ops = &wd_ops,
 		.timeout = AMT_WD_DEFAULT_TIMEOUT,
@@ -362,10 +360,12 @@ void  mei_watchdog_register(struct mei_device *dev)
 	dev->wd_due_counter = !!dev->wd_timeout;
 
 	if (watchdog_register_device(&amt_wd_dev)) {
-		dev_err(&dev->pdev->dev, "unable to register watchdog device.\n");
+		dev_err(&dev->pdev->dev,
+			"wd: unable to register watchdog device.\n");
 		dev->wd_interface_reg = false;
 	} else {
-		dev_dbg(&dev->pdev->dev, "successfully register watchdog interface.\n");
+		dev_dbg(&dev->pdev->dev,
+			"wd: successfully register watchdog interface.\n");
 		dev->wd_interface_reg = true;
 	}
 }
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d70ede7a7f96..d58431e99f73 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE
 
 	  You should never need this option, say N.
 
-config PC300
-	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
-	depends on HDLC && PCI && BROKEN
-	---help---
-	  This driver is broken because of struct tty_driver change.
-
-	  Driver for the Cyclades-PC300 synchronous communication boards.
-
-	  These boards provide synchronous serial interfaces to your
-	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
-	  T1/E1). If you wish to support Multilink PPP, please select the
-	  option later and read the file README.mlppp provided by PC300
-	  package.
-
-	  To compile this as a module, choose M here: the module
-	  will be called pc300.
-
-	  If unsure, say N.
-
-config PC300_MLPPP
-	bool "Cyclades-PC300 MLPPP support"
-	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
-	help
-	  Multilink PPP over the PC300 synchronous communication boards.
-
-comment "Cyclades-PC300 MLPPP support is disabled."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
-comment "Refer to the file README.mlppp, provided by PC300 package."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
 config PC300TOO
 	tristate "Cyclades PC300 RSV/X21 alternative support"
 	depends on HDLC && PCI
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 19d14bc28356..eac709bed7ae 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
-pc300-y				:= pc300_drv.o
-pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
-pc300-objs			:= $(pc300-y)
-
 obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
@@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_CYCLADES_SYNC)	+= cycx_drv.o cyclomx.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_SBNI)		+= sbni.o
-obj-$(CONFIG_PC300)		+= pc300.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 97d412d91458..32b02e443ed3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -24,8 +24,6 @@ menuconfig STAGING
 
 if STAGING
 
-source "drivers/staging/serial/Kconfig"
-
 source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"
@@ -74,8 +72,6 @@ source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
 
-source "drivers/staging/vme/Kconfig"
-
 source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
@@ -116,12 +112,12 @@ source "drivers/staging/cptm1217/Kconfig"
 
 source "drivers/staging/ste_rmi4/Kconfig"
 
-source "drivers/staging/mei/Kconfig"
-
 source "drivers/staging/nvec/Kconfig"
 
 source "drivers/staging/media/Kconfig"
 
+source "drivers/staging/net/Kconfig"
+
 source "drivers/staging/omapdrm/Kconfig"
 
 source "drivers/staging/android/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ffe7d44374e6..e603c0756960 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -3,8 +3,8 @@
 # fix for build system bug...
 obj-$(CONFIG_STAGING)		+= staging.o
 
-obj-y				+= serial/
 obj-y				+= media/
+obj-y				+= net/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
@@ -50,7 +50,6 @@ obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
-obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
 obj-$(CONFIG_ANDROID)		+= android/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index eb1dee26bda3..775229d12569 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -55,31 +55,14 @@ config ANDROID_LOW_MEMORY_KILLER
 
 source "drivers/staging/android/switch/Kconfig"
 
-config ANDROID_INTF_ALARM
+config ANDROID_INTF_ALARM_DEV
 	bool "Android alarm driver"
 	depends on RTC_CLASS
 	default n
 	help
 	  Provides non-wakeup and rtc backed wakeup alarms based on rtc or
 	  elapsed realtime, and a non-wakeup alarm on the monotonic clock.
-	  Also provides an interface to set the wall time which must be used
-	  for elapsed realtime to work.
-
-config ANDROID_INTF_ALARM_DEV
-	bool "Android alarm device"
-	depends on ANDROID_INTF_ALARM
-	default y
-	help
-	  Exports the alarm interface to user-space.
-
-config ANDROID_ALARM_OLDDRV_COMPAT
-	bool "Android Alarm compatability with old drivers"
-	depends on ANDROID_INTF_ALARM
-	default n
-	help
-	  Provides preprocessor alias to aid compatability with
-	  older out-of-tree drivers that use the Android Alarm
-	  in-kernel API. This will be removed eventually.
+	  Also exports the alarm interface to user-space.
 
 endif # if ANDROID
 
diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile
index 9b6c9ed91f69..b4be69f80d78 100644
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@@ -7,5 +7,4 @@ obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
 obj-$(CONFIG_ANDROID_SWITCH)		+= switch/
-obj-$(CONFIG_ANDROID_INTF_ALARM)	+= alarm.o
 obj-$(CONFIG_ANDROID_INTF_ALARM_DEV)	+= alarm-dev.o
diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c
index 03efb34cbe2e..53ce6ecf390a 100644
--- a/drivers/staging/android/alarm-dev.c
+++ b/drivers/staging/android/alarm-dev.c
@@ -22,19 +22,9 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/alarmtimer.h>
 #include "android_alarm.h"
 
-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
 #define ANDROID_ALARM_PRINT_INFO (1U << 0)
 #define ANDROID_ALARM_PRINT_IO (1U << 1)
 #define ANDROID_ALARM_PRINT_INT (1U << 2)
@@ -54,19 +44,65 @@ module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
 	ANDROID_ALARM_RTC_WAKEUP_MASK | \
 	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
 
-/* support old usespace code */
+/* support old userspace code */
 #define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
 #define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
 
 static int alarm_opened;
 static DEFINE_SPINLOCK(alarm_slock);
-static struct wake_lock alarm_wake_lock;
+static struct wakeup_source alarm_wake_lock;
 static DECLARE_WAIT_QUEUE_HEAD(alarm_wait_queue);
 static uint32_t alarm_pending;
 static uint32_t alarm_enabled;
 static uint32_t wait_pending;
 
-static struct android_alarm alarms[ANDROID_ALARM_TYPE_COUNT];
+struct devalarm {
+	union {
+		struct hrtimer hrt;
+		struct alarm alrm;
+	} u;
+	enum android_alarm_type type;
+};
+
+static struct devalarm alarms[ANDROID_ALARM_TYPE_COUNT];
+
+
+static int is_wakeup(enum android_alarm_type type)
+{
+	if (type == ANDROID_ALARM_RTC_WAKEUP ||
+			type == ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP)
+		return 1;
+	return 0;
+}
+
+
+static void devalarm_start(struct devalarm *alrm, ktime_t exp)
+{
+	if (is_wakeup(alrm->type))
+		alarm_start(&alrm->u.alrm, exp);
+	else
+		hrtimer_start(&alrm->u.hrt, exp, HRTIMER_MODE_ABS);
+}
+
+
+static int devalarm_try_to_cancel(struct devalarm *alrm)
+{
+	int ret;
+	if (is_wakeup(alrm->type))
+		ret = alarm_try_to_cancel(&alrm->u.alrm);
+	else
+		ret = hrtimer_try_to_cancel(&alrm->u.hrt);
+	return ret;
+}
+
+static void devalarm_cancel(struct devalarm *alrm)
+{
+	if (is_wakeup(alrm->type))
+		alarm_cancel(&alrm->u.alrm);
+	else
+		hrtimer_cancel(&alrm->u.hrt);
+}
+
 
 static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -75,6 +111,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct timespec new_alarm_time;
 	struct timespec new_rtc_time;
 	struct timespec tmp_time;
+	struct rtc_time new_rtc_tm;
+	struct rtc_device *rtc_dev;
 	enum android_alarm_type alarm_type = ANDROID_ALARM_IOCTL_TO_TYPE(cmd);
 	uint32_t alarm_type_mask = 1U << alarm_type;
 
@@ -101,11 +139,11 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case ANDROID_ALARM_CLEAR(0):
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm %d clear\n", alarm_type);
-		android_alarm_try_to_cancel(&alarms[alarm_type]);
+		devalarm_try_to_cancel(&alarms[alarm_type]);
 		if (alarm_pending) {
 			alarm_pending &= ~alarm_type_mask;
 			if (!alarm_pending && !wait_pending)
-				wake_unlock(&alarm_wake_lock);
+				__pm_relax(&alarm_wake_lock);
 		}
 		alarm_enabled &= ~alarm_type_mask;
 		spin_unlock_irqrestore(&alarm_slock, flags);
@@ -132,8 +170,7 @@ from_old_alarm_set:
 		pr_alarm(IO, "alarm %d set %ld.%09ld\n", alarm_type,
 			new_alarm_time.tv_sec, new_alarm_time.tv_nsec);
 		alarm_enabled |= alarm_type_mask;
-		android_alarm_start_range(&alarms[alarm_type],
-			timespec_to_ktime(new_alarm_time),
+		devalarm_start(&alarms[alarm_type],
 			timespec_to_ktime(new_alarm_time));
 		spin_unlock_irqrestore(&alarm_slock, flags);
 		if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_SET_AND_WAIT(0)
@@ -144,7 +181,7 @@ from_old_alarm_set:
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm wait\n");
 		if (!alarm_pending && wait_pending) {
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 		}
 		spin_unlock_irqrestore(&alarm_slock, flags);
@@ -163,7 +200,13 @@ from_old_alarm_set:
 			rv = -EFAULT;
 			goto err1;
 		}
-		rv = android_alarm_set_rtc(new_rtc_time);
+		rtc_time_to_tm(new_rtc_time.tv_sec, &new_rtc_tm);
+		rtc_dev = alarmtimer_get_rtcdev();
+		rv = do_settimeofday(&new_rtc_time);
+		if (rv < 0)
+			goto err1;
+		if (rtc_dev)
+			rv = rtc_set_time(rtc_dev, &new_rtc_tm);
 		spin_lock_irqsave(&alarm_slock, flags);
 		alarm_pending |= ANDROID_ALARM_TIME_CHANGE_MASK;
 		wake_up(&alarm_wait_queue);
@@ -179,8 +222,7 @@ from_old_alarm_set:
 			break;
 		case ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP:
 		case ANDROID_ALARM_ELAPSED_REALTIME:
-			tmp_time =
-				ktime_to_timespec(alarm_get_elapsed_realtime());
+			get_monotonic_boottime(&tmp_time);
 			break;
 		case ANDROID_ALARM_TYPE_COUNT:
 		case ANDROID_ALARM_SYSTEMTIME:
@@ -224,14 +266,14 @@ static int alarm_release(struct inode *inode, struct file *file)
 				alarm_enabled &= ~alarm_type_mask;
 			}
 			spin_unlock_irqrestore(&alarm_slock, flags);
-			android_alarm_cancel(&alarms[i]);
+			devalarm_cancel(&alarms[i]);
 			spin_lock_irqsave(&alarm_slock, flags);
 		}
 		if (alarm_pending | wait_pending) {
 			if (alarm_pending)
 				pr_alarm(INFO, "alarm_release: clear "
 					"pending alarms %x\n", alarm_pending);
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 			alarm_pending = 0;
 		}
@@ -241,15 +283,15 @@ static int alarm_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static void alarm_triggered(struct android_alarm *alarm)
+static void devalarm_triggered(struct devalarm *alarm)
 {
 	unsigned long flags;
 	uint32_t alarm_type_mask = 1U << alarm->type;
 
-	pr_alarm(INT, "alarm_triggered type %d\n", alarm->type);
+	pr_alarm(INT, "devalarm_triggered type %d\n", alarm->type);
 	spin_lock_irqsave(&alarm_slock, flags);
 	if (alarm_enabled & alarm_type_mask) {
-		wake_lock_timeout(&alarm_wake_lock, 5 * HZ);
+		__pm_wakeup_event(&alarm_wake_lock, 5000); /* 5secs */
 		alarm_enabled &= ~alarm_type_mask;
 		alarm_pending |= alarm_type_mask;
 		wake_up(&alarm_wait_queue);
@@ -257,6 +299,25 @@ static void alarm_triggered(struct android_alarm *alarm)
 	spin_unlock_irqrestore(&alarm_slock, flags);
 }
 
+
+static enum hrtimer_restart devalarm_hrthandler(struct hrtimer *hrt)
+{
+	struct devalarm *devalrm = container_of(hrt, struct devalarm, u.hrt);
+
+	devalarm_triggered(devalrm);
+	return HRTIMER_NORESTART;
+}
+
+static enum alarmtimer_restart devalarm_alarmhandler(struct alarm *alrm,
+							ktime_t now)
+{
+	struct devalarm *devalrm = container_of(alrm, struct devalarm, u.alrm);
+
+	devalarm_triggered(devalrm);
+	return ALARMTIMER_NORESTART;
+}
+
+
 static const struct file_operations alarm_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = alarm_ioctl,
@@ -279,17 +340,31 @@ static int __init alarm_dev_init(void)
 	if (err)
 		return err;
 
-	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++)
-		android_alarm_init(&alarms[i], i, alarm_triggered);
-	wake_lock_init(&alarm_wake_lock, WAKE_LOCK_SUSPEND, "alarm");
+	alarm_init(&alarms[ANDROID_ALARM_RTC_WAKEUP].u.alrm,
+			ALARM_REALTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_RTC].u.hrt,
+			CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	alarm_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].u.alrm,
+			ALARM_BOOTTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME].u.hrt,
+			CLOCK_BOOTTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].u.hrt,
+			CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+
+	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) {
+		alarms[i].type = i;
+		if (!is_wakeup(i))
+			alarms[i].u.hrt.function = devalarm_hrthandler;
+	}
 
+	wakeup_source_init(&alarm_wake_lock, "alarm");
 	return 0;
 }
 
 static void  __exit alarm_dev_exit(void)
 {
 	misc_deregister(&alarm_device);
-	wake_lock_destroy(&alarm_wake_lock);
+	wakeup_source_trash(&alarm_wake_lock);
 }
 
 module_init(alarm_dev_init);
diff --git a/drivers/staging/android/alarm.c b/drivers/staging/android/alarm.c
deleted file mode 100644
index c68950b9e08f..000000000000
--- a/drivers/staging/android/alarm.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/* drivers/rtc/alarm.c
- *
- * Copyright (C) 2007-2009 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include "android_alarm.h"
-
-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
-#define ANDROID_ALARM_PRINT_ERROR (1U << 0)
-#define ANDROID_ALARM_PRINT_INIT_STATUS (1U << 1)
-#define ANDROID_ALARM_PRINT_TSET (1U << 2)
-#define ANDROID_ALARM_PRINT_CALL (1U << 3)
-#define ANDROID_ALARM_PRINT_SUSPEND (1U << 4)
-#define ANDROID_ALARM_PRINT_INT (1U << 5)
-#define ANDROID_ALARM_PRINT_FLOW (1U << 6)
-
-static int debug_mask = ANDROID_ALARM_PRINT_ERROR | \
-			ANDROID_ALARM_PRINT_INIT_STATUS;
-module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define pr_alarm(debug_level_mask, args...) \
-	do { \
-		if (debug_mask & ANDROID_ALARM_PRINT_##debug_level_mask) { \
-			pr_info(args); \
-		} \
-	} while (0)
-
-#define ANDROID_ALARM_WAKEUP_MASK ( \
-	ANDROID_ALARM_RTC_WAKEUP_MASK | \
-	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
-
-/* support old usespace code */
-#define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
-#define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
-
-struct alarm_queue {
-	struct rb_root alarms;
-	struct rb_node *first;
-	struct hrtimer timer;
-	ktime_t delta;
-	bool stopped;
-	ktime_t stopped_time;
-};
-
-static struct rtc_device *alarm_rtc_dev;
-static DEFINE_SPINLOCK(alarm_slock);
-static DEFINE_MUTEX(alarm_setrtc_mutex);
-static struct wake_lock alarm_rtc_wake_lock;
-static struct platform_device *alarm_platform_dev;
-struct alarm_queue alarms[ANDROID_ALARM_TYPE_COUNT];
-static bool suspended;
-
-static void update_timer_locked(struct alarm_queue *base, bool head_removed)
-{
-	struct android_alarm *alarm;
-	bool is_wakeup = base == &alarms[ANDROID_ALARM_RTC_WAKEUP] ||
-			base == &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-
-	if (base->stopped) {
-		pr_alarm(FLOW, "changed alarm while setting the wall time\n");
-		return;
-	}
-
-	if (is_wakeup && !suspended && head_removed)
-		wake_unlock(&alarm_rtc_wake_lock);
-
-	if (!base->first)
-		return;
-
-	alarm = container_of(base->first, struct android_alarm, node);
-
-	pr_alarm(FLOW, "selected alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (is_wakeup && suspended) {
-		pr_alarm(FLOW, "changed alarm while suspened\n");
-		wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-		return;
-	}
-
-	hrtimer_try_to_cancel(&base->timer);
-	base->timer.node.expires = ktime_add(base->delta, alarm->expires);
-	base->timer._softexpires = ktime_add(base->delta, alarm->softexpires);
-	hrtimer_start_expires(&base->timer, HRTIMER_MODE_ABS);
-}
-
-static void alarm_enqueue_locked(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	struct rb_node **link = &base->alarms.rb_node;
-	struct rb_node *parent = NULL;
-	struct android_alarm *entry;
-	int leftmost = 1;
-	bool was_first = false;
-
-	pr_alarm(FLOW, "added alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (base->first == &alarm->node) {
-		base->first = rb_next(&alarm->node);
-		was_first = true;
-	}
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-	}
-
-	while (*link) {
-		parent = *link;
-		entry = rb_entry(parent, struct android_alarm, node);
-		/*
-		* We dont care about collisions. Nodes with
-		* the same expiry time stay together.
-		*/
-		if (alarm->expires.tv64 < entry->expires.tv64) {
-			link = &(*link)->rb_left;
-		} else {
-			link = &(*link)->rb_right;
-			leftmost = 0;
-		}
-	}
-	if (leftmost)
-		base->first = &alarm->node;
-	if (leftmost || was_first)
-		update_timer_locked(base, was_first);
-
-	rb_link_node(&alarm->node, parent, link);
-	rb_insert_color(&alarm->node, &base->alarms);
-}
-
-/**
- * android_alarm_init - initialize an alarm
- * @alarm:	the alarm to be initialized
- * @type:	the alarm type to be used
- * @function:	alarm callback function
- */
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *))
-{
-	RB_CLEAR_NODE(&alarm->node);
-	alarm->type = type;
-	alarm->function = function;
-
-	pr_alarm(FLOW, "created alarm, type %d, func %pF\n", type, function);
-}
-
-
-/**
- * android_alarm_start_range - (re)start an alarm
- * @alarm:	the alarm to be added
- * @start:	earliest expiry time
- * @end:	expiry time
- */
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	alarm->softexpires = start;
-	alarm->expires = end;
-	alarm_enqueue_locked(alarm);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-}
-
-/**
- * android_alarm_try_to_cancel - try to deactivate an alarm
- * @alarm:	alarm to stop
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- * -1 when the alarm may currently be excuting the callback function and
- *    cannot be stopped (it may also be inactive)
- */
-int android_alarm_try_to_cancel(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	unsigned long flags;
-	bool first = false;
-	int ret = 0;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		pr_alarm(FLOW, "canceled alarm, type %d, func %pF at %lld\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires));
-		ret = 1;
-		if (base->first == &alarm->node) {
-			base->first = rb_next(&alarm->node);
-			first = true;
-		}
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		if (first)
-			update_timer_locked(base, true);
-	} else
-		pr_alarm(FLOW, "tried to cancel alarm, type %d, func %pF\n",
-			alarm->type, alarm->function);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (!ret && hrtimer_callback_running(&base->timer))
-		ret = -1;
-	return ret;
-}
-
-/**
- * android_alarm_cancel - cancel an alarm and wait for the handler to finish.
- * @alarm:	the alarm to be cancelled
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- */
-int android_alarm_cancel(struct android_alarm *alarm)
-{
-	for (;;) {
-		int ret = android_alarm_try_to_cancel(alarm);
-		if (ret >= 0)
-			return ret;
-		cpu_relax();
-	}
-}
-
-/**
- * alarm_set_rtc - set the kernel and rtc walltime
- * @new_time:	timespec value containing the new time
- */
-int android_alarm_set_rtc(struct timespec new_time)
-{
-	int i;
-	int ret;
-	unsigned long flags;
-	struct rtc_time rtc_new_rtc_time;
-	struct timespec tmp_time;
-
-	rtc_time_to_tm(new_time.tv_sec, &rtc_new_rtc_time);
-
-	pr_alarm(TSET, "set rtc %ld %ld - rtc %02d:%02d:%02d %02d/%02d/%04d\n",
-		new_time.tv_sec, new_time.tv_nsec,
-		rtc_new_rtc_time.tm_hour, rtc_new_rtc_time.tm_min,
-		rtc_new_rtc_time.tm_sec, rtc_new_rtc_time.tm_mon + 1,
-		rtc_new_rtc_time.tm_mday,
-		rtc_new_rtc_time.tm_year + 1900);
-
-	mutex_lock(&alarm_setrtc_mutex);
-	spin_lock_irqsave(&alarm_slock, flags);
-	wake_lock(&alarm_rtc_wake_lock);
-	getnstimeofday(&tmp_time);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_try_to_cancel(&alarms[i].timer);
-		alarms[i].stopped = true;
-		alarms[i].stopped_time = timespec_to_ktime(tmp_time);
-	}
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-		ktime_sub(alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta,
-			timespec_to_ktime(timespec_sub(tmp_time, new_time)));
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	ret = do_settimeofday(&new_time);
-	spin_lock_irqsave(&alarm_slock, flags);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		alarms[i].stopped = false;
-		update_timer_locked(&alarms[i], false);
-	}
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (ret < 0) {
-		pr_alarm(ERROR, "alarm_set_rtc: Failed to set time\n");
-		goto err;
-	}
-	if (!alarm_rtc_dev) {
-		pr_alarm(ERROR,
-			"alarm_set_rtc: no RTC, time will be lost on reboot\n");
-		goto err;
-	}
-	ret = rtc_set_time(alarm_rtc_dev, &rtc_new_rtc_time);
-	if (ret < 0)
-		pr_alarm(ERROR, "alarm_set_rtc: "
-			"Failed to set RTC, time will be lost on reboot\n");
-err:
-	wake_unlock(&alarm_rtc_wake_lock);
-	mutex_unlock(&alarm_setrtc_mutex);
-	return ret;
-}
-
-/**
- * alarm_get_elapsed_realtime - get the elapsed real time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t alarm_get_elapsed_realtime(void)
-{
-	ktime_t now;
-	unsigned long flags;
-	struct alarm_queue *base = &alarms[ANDROID_ALARM_ELAPSED_REALTIME];
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	now = base->stopped ? base->stopped_time : ktime_get_real();
-	now = ktime_sub(now, base->delta);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return now;
-}
-
-static enum hrtimer_restart alarm_timer_triggered(struct hrtimer *timer)
-{
-	struct alarm_queue *base;
-	struct android_alarm *alarm;
-	unsigned long flags;
-	ktime_t now;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-
-	base = container_of(timer, struct alarm_queue, timer);
-	now = base->stopped ? base->stopped_time : hrtimer_cb_get_time(timer);
-	now = ktime_sub(now, base->delta);
-
-	pr_alarm(INT, "alarm_timer_triggered type %ld at %lld\n",
-		base - alarms, ktime_to_ns(now));
-
-	while (base->first) {
-		alarm = container_of(base->first, struct android_alarm, node);
-		if (alarm->softexpires.tv64 > now.tv64) {
-			pr_alarm(FLOW, "don't call alarm, %pF, %lld (s %lld)\n",
-				alarm->function, ktime_to_ns(alarm->expires),
-				ktime_to_ns(alarm->softexpires));
-			break;
-		}
-		base->first = rb_next(&alarm->node);
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		pr_alarm(CALL, "call alarm, type %d, func %pF, %lld (s %lld)\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires),
-			ktime_to_ns(alarm->softexpires));
-		spin_unlock_irqrestore(&alarm_slock, flags);
-		alarm->function(alarm);
-		spin_lock_irqsave(&alarm_slock, flags);
-	}
-	if (!base->first)
-		pr_alarm(FLOW, "no more alarms of type %ld\n", base - alarms);
-	update_timer_locked(base, true);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return HRTIMER_NORESTART;
-}
-
-static void alarm_triggered_func(void *p)
-{
-	struct rtc_device *rtc = alarm_rtc_dev;
-	if (!(rtc->irq_data & RTC_AF))
-		return;
-	pr_alarm(INT, "rtc alarm triggered\n");
-	wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-}
-
-static int alarm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int                 err = 0;
-	unsigned long       flags;
-	struct rtc_wkalrm   rtc_alarm;
-	struct rtc_time     rtc_current_rtc_time;
-	unsigned long       rtc_current_time;
-	unsigned long       rtc_alarm_time;
-	struct timespec     rtc_delta;
-	struct timespec     wall_time;
-	struct alarm_queue *wakeup_queue = NULL;
-	struct alarm_queue *tmp_queue = NULL;
-
-	pr_alarm(SUSPEND, "alarm_suspend(%p, %d)\n", pdev, state.event);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = true;
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	hrtimer_cancel(&alarms[ANDROID_ALARM_RTC_WAKEUP].timer);
-	hrtimer_cancel(&alarms[
-			ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].timer);
-
-	tmp_queue = &alarms[ANDROID_ALARM_RTC_WAKEUP];
-	if (tmp_queue->first)
-		wakeup_queue = tmp_queue;
-	tmp_queue = &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-	if (tmp_queue->first && (!wakeup_queue ||
-				hrtimer_get_expires(&tmp_queue->timer).tv64 <
-				hrtimer_get_expires(&wakeup_queue->timer).tv64))
-		wakeup_queue = tmp_queue;
-	if (wakeup_queue) {
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		getnstimeofday(&wall_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		set_normalized_timespec(&rtc_delta,
-					wall_time.tv_sec - rtc_current_time,
-					wall_time.tv_nsec);
-
-		rtc_alarm_time = timespec_sub(ktime_to_timespec(
-			hrtimer_get_expires(&wakeup_queue->timer)),
-			rtc_delta).tv_sec;
-
-		rtc_time_to_tm(rtc_alarm_time, &rtc_alarm.time);
-		rtc_alarm.enabled = 1;
-		rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		pr_alarm(SUSPEND,
-			"rtc alarm set at %ld, now %ld, rtc delta %ld.%09ld\n",
-			rtc_alarm_time, rtc_current_time,
-			rtc_delta.tv_sec, rtc_delta.tv_nsec);
-		if (rtc_current_time + 1 >= rtc_alarm_time) {
-			pr_alarm(SUSPEND, "alarm about to go off\n");
-			memset(&rtc_alarm, 0, sizeof(rtc_alarm));
-			rtc_alarm.enabled = 0;
-			rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-
-			spin_lock_irqsave(&alarm_slock, flags);
-			suspended = false;
-			wake_lock_timeout(&alarm_rtc_wake_lock, 2 * HZ);
-			update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP],
-									false);
-			update_timer_locked(&alarms[
-				ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP], false);
-			err = -EBUSY;
-			spin_unlock_irqrestore(&alarm_slock, flags);
-		}
-	}
-	return err;
-}
-
-static int alarm_resume(struct platform_device *pdev)
-{
-	struct rtc_wkalrm alarm;
-	unsigned long       flags;
-
-	pr_alarm(SUSPEND, "alarm_resume(%p)\n", pdev);
-
-	memset(&alarm, 0, sizeof(alarm));
-	alarm.enabled = 0;
-	rtc_set_alarm(alarm_rtc_dev, &alarm);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = false;
-	update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP], false);
-	update_timer_locked(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP],
-									false);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	return 0;
-}
-
-static struct rtc_task alarm_rtc_task = {
-	.func = alarm_triggered_func
-};
-
-static int rtc_alarm_add_device(struct device *dev,
-				struct class_interface *class_intf)
-{
-	int err;
-	struct rtc_device *rtc = to_rtc_device(dev);
-
-	mutex_lock(&alarm_setrtc_mutex);
-
-	if (alarm_rtc_dev) {
-		err = -EBUSY;
-		goto err1;
-	}
-
-	alarm_platform_dev =
-		platform_device_register_simple("alarm", -1, NULL, 0);
-	if (IS_ERR(alarm_platform_dev)) {
-		err = PTR_ERR(alarm_platform_dev);
-		goto err2;
-	}
-	err = rtc_irq_register(rtc, &alarm_rtc_task);
-	if (err)
-		goto err3;
-	alarm_rtc_dev = rtc;
-	pr_alarm(INIT_STATUS, "using rtc device, %s, for alarms", rtc->name);
-	mutex_unlock(&alarm_setrtc_mutex);
-
-	return 0;
-
-err3:
-	platform_device_unregister(alarm_platform_dev);
-err2:
-err1:
-	mutex_unlock(&alarm_setrtc_mutex);
-	return err;
-}
-
-static void rtc_alarm_remove_device(struct device *dev,
-				    struct class_interface *class_intf)
-{
-	if (dev == &alarm_rtc_dev->dev) {
-		pr_alarm(INIT_STATUS, "lost rtc device for alarms");
-		rtc_irq_unregister(alarm_rtc_dev, &alarm_rtc_task);
-		platform_device_unregister(alarm_platform_dev);
-		alarm_rtc_dev = NULL;
-	}
-}
-
-static struct class_interface rtc_alarm_interface = {
-	.add_dev = &rtc_alarm_add_device,
-	.remove_dev = &rtc_alarm_remove_device,
-};
-
-static struct platform_driver alarm_driver = {
-	.suspend = alarm_suspend,
-	.resume = alarm_resume,
-	.driver = {
-		.name = "alarm"
-	}
-};
-
-static int __init alarm_late_init(void)
-{
-	unsigned long   flags;
-	struct timespec tmp_time, system_time;
-
-	/* this needs to run after the rtc is read at boot */
-	spin_lock_irqsave(&alarm_slock, flags);
-	/* We read the current rtc and system time so we can later calulate
-	 * elasped realtime to be (boot_systemtime + rtc - boot_rtc) ==
-	 * (rtc - (boot_rtc - boot_systemtime))
-	 */
-	getnstimeofday(&tmp_time);
-	ktime_get_ts(&system_time);
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-			timespec_to_ktime(timespec_sub(tmp_time, system_time));
-
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return 0;
-}
-
-static int __init alarm_driver_init(void)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_init(&alarms[i].timer,
-				CLOCK_REALTIME, HRTIMER_MODE_ABS);
-		alarms[i].timer.function = alarm_timer_triggered;
-	}
-	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].timer,
-		     CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-	alarms[ANDROID_ALARM_SYSTEMTIME].timer.function = alarm_timer_triggered;
-	err = platform_driver_register(&alarm_driver);
-	if (err < 0)
-		goto err1;
-	wake_lock_init(&alarm_rtc_wake_lock, WAKE_LOCK_SUSPEND, "alarm_rtc");
-	rtc_alarm_interface.class = rtc_class;
-	err = class_interface_register(&rtc_alarm_interface);
-	if (err < 0)
-		goto err2;
-
-	return 0;
-
-err2:
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-err1:
-	return err;
-}
-
-static void  __exit alarm_exit(void)
-{
-	class_interface_unregister(&rtc_alarm_interface);
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-}
-
-late_initcall(alarm_late_init);
-module_init(alarm_driver_init);
-module_exit(alarm_exit);
-
diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h
index 6eecbde2ef6f..d0cafd637199 100644
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@@ -33,65 +33,6 @@ enum android_alarm_type {
 	/* ANDROID_ALARM_TIME_CHANGE = 16 */
 };
 
-#ifdef __KERNEL__
-
-#include <linux/ktime.h>
-#include <linux/rbtree.h>
-
-/*
- * The alarm interface is similar to the hrtimer interface but adds support
- * for wakeup from suspend. It also adds an elapsed realtime clock that can
- * be used for periodic timers that need to keep runing while the system is
- * suspended and not be disrupted when the wall time is set.
- */
-
-/**
- * struct alarm - the basic alarm structure
- * @node:	red black tree node for time ordered insertion
- * @type:	alarm type. rtc/elapsed-realtime/systemtime, wakeup/non-wakeup.
- * @softexpires: the absolute earliest expiry time of the alarm.
- * @expires:	the absolute expiry time.
- * @function:	alarm expiry callback function
- *
- * The alarm structure must be initialized by alarm_init()
- *
- */
-
-struct android_alarm {
-	struct rb_node		node;
-	enum android_alarm_type type;
-	ktime_t			softexpires;
-	ktime_t			expires;
-	void			(*function)(struct android_alarm *);
-};
-
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *));
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end);
-int android_alarm_try_to_cancel(struct android_alarm *alarm);
-int android_alarm_cancel(struct android_alarm *alarm);
-ktime_t alarm_get_elapsed_realtime(void);
-
-/* set rtc while preserving elapsed realtime */
-int android_alarm_set_rtc(const struct timespec ts);
-
-#ifdef CONFIG_ANDROID_ALARM_OLDDRV_COMPAT
-/*
- * Some older drivers depend on the old API,
- * so provide compatability macros for now.
- */
-#define alarm android_alarm
-#define alarm_init(x, y, z) android_alarm_init(x, y, z)
-#define alarm_start_range(x, y, z) android_alarm_start_range(x, y, z)
-#define alarm_try_to_cancel(x) android_alarm_try_to_cancel(x)
-#define alarm_cancel(x) android_alarm_cancel(x)
-#define alarm_set_rtc(x) android_alarm_set_rtc(x)
-#endif
-
-
-#endif
-
 enum android_alarm_return_flags {
 	ANDROID_ALARM_RTC_WAKEUP_MASK = 1U << ANDROID_ALARM_RTC_WAKEUP,
 	ANDROID_ALARM_RTC_MASK = 1U << ANDROID_ALARM_RTC,
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 25ab6f2759e9..2f7d195d8b15 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -53,17 +53,17 @@ struct flat_binder_object {
 
 	/* 8 bytes of data. */
 	union {
-		void		*binder;	/* local object */
+		void __user	*binder;	/* local object */
 		signed long	handle;		/* remote object */
 	};
 
 	/* extra data associated with local object */
-	void			*cookie;
+	void __user		*cookie;
 };
 
 /*
  * On 64-bit platforms where user code may run in 32-bits the driver must
- * translate the buffer (and local binder) addresses apropriately.
+ * translate the buffer (and local binder) addresses appropriately.
  */
 
 struct binder_write_read {
@@ -139,9 +139,9 @@ struct binder_transaction_data {
 	union {
 		struct {
 			/* transaction data */
-			const void	*buffer;
+			const void __user	*buffer;
 			/* offsets from buffer to flat_binder_object structs */
-			const void	*offsets;
+			const void __user	*offsets;
 		} ptr;
 		uint8_t	buf[8];
 	} data;
diff --git a/drivers/staging/android/persistent_ram.c b/drivers/staging/android/persistent_ram.c
index 8d8c1e33e0ff..8407112f701f 100644
--- a/drivers/staging/android/persistent_ram.c
+++ b/drivers/staging/android/persistent_ram.c
@@ -424,11 +424,11 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc)
 		if (buffer_size(prz) > prz->buffer_size ||
 		    buffer_start(prz) > buffer_size(prz))
 			pr_info("persistent_ram: found existing invalid buffer,"
-				" size %ld, start %ld\n",
+				" size %zu, start %zu\n",
 			       buffer_size(prz), buffer_start(prz));
 		else {
 			pr_info("persistent_ram: found existing buffer,"
-				" size %ld, start %ld\n",
+				" size %zu, start %zu\n",
 			       buffer_size(prz), buffer_start(prz));
 			persistent_ram_save_old(prz);
 		}
diff --git a/drivers/staging/android/timed_output.c b/drivers/staging/android/timed_output.c
index f373422308e0..38d930cadad3 100644
--- a/drivers/staging/android/timed_output.c
+++ b/drivers/staging/android/timed_output.c
@@ -99,6 +99,7 @@ EXPORT_SYMBOL_GPL(timed_output_dev_register);
 
 void timed_output_dev_unregister(struct timed_output_dev *tdev)
 {
+	tdev->enable(tdev, 0);
 	device_remove_file(tdev->dev, &dev_attr_enable);
 	device_destroy(timed_output_class, MKDEV(0, tdev->index));
 	dev_set_drvdata(tdev->dev, NULL);
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 83549d9cfefc..510d79639217 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -782,20 +782,20 @@ static int __init asus_oled_init(void)
 	oled_class = class_create(THIS_MODULE, ASUS_OLED_UNDERSCORE_NAME);
 
 	if (IS_ERR(oled_class)) {
-		err("Error creating " ASUS_OLED_UNDERSCORE_NAME " class");
+		printk(KERN_ERR "Error creating " ASUS_OLED_UNDERSCORE_NAME " class\n");
 		return PTR_ERR(oled_class);
 	}
 
 	retval = class_create_file(oled_class, &class_attr_version.attr);
 	if (retval) {
-		err("Error creating class version file");
+		printk(KERN_ERR "Error creating class version file\n");
 		goto error;
 	}
 
 	retval = usb_register(&oled_driver);
 
 	if (retval) {
-		err("usb_register failed. Error number %d", retval);
+		printk(KERN_ERR "usb_register failed. Error number %d\n", retval);
 		goto error;
 	}
 
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 1c7db81a1ee8..2b46f4d4ef0e 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -1115,20 +1115,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LP_DDRSetting80MHz;
-                RegCount = (sizeof(asT3LP_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LP_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LP_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@@ -1146,20 +1146,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting80MHz;
-                RegCount=(sizeof(asT3LPB_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LPB_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@@ -1167,7 +1167,7 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 			case DDR_160_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3LPB_DDRSetting160MHz;
-					RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SET_NODE);
+					RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz);
 					RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
 					psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
 
@@ -1181,19 +1181,19 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3_DDRSetting80MHz;
-                RegCount = (sizeof(asT3_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				psDDRSetting = asT3_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 				break;
@@ -1207,20 +1207,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 		    {
 		        case DDR_80_MHZ:
 					psDDRSetting = asT3B_DDRSetting80MHz;
-                    RegCount = (sizeof(asT3B_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                    RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
                     RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                     psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			        break;
 		        case DDR_100_MHZ:
 					psDDRSetting = asT3B_DDRSetting100MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
                     RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                     psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			        break;
 		        case DDR_133_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3B_DDRSetting133MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
 	                RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		            psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 					break;
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 5b4fd372ec36..1da21642c18e 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -1,51 +1,52 @@
 #include "headers.h"
 
-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header);
 
-static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader,BOOLEAN *bParseDone,USHORT *pusPayloadLength)
+static UCHAR *GetNextIPV6ChainedHeader(UCHAR **ppucPayload,
+	UCHAR *pucNextHeader, BOOLEAN *bParseDone, USHORT *pusPayloadLength)
 {
 	UCHAR *pucRetHeaderPtr = NULL;
 	UCHAR *pucPayloadPtr = NULL;
 	USHORT  usNextHeaderOffset = 0 ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
-	if((NULL == ppucPayload) || (*pusPayloadLength == 0) || (*bParseDone))
-	{
+	if ((ppucPayload == NULL) || (*pusPayloadLength == 0) ||
+		(*bParseDone)) {
 		*bParseDone = TRUE;
 		return NULL;
-
 	}
 
 	pucRetHeaderPtr = *ppucPayload;
 	pucPayloadPtr = *ppucPayload;
 
-	if(!pucRetHeaderPtr || !pucPayloadPtr)
-	{
+	if (!pucRetHeaderPtr || !pucPayloadPtr) {
 		*bParseDone = TRUE;
 		return NULL;
 	}
 
-	//Get the Nextt Header Type
+	/* Get the Nextt Header Type */
 	*bParseDone = FALSE;
 
 
-
-	switch(*pucNextHeader)
-	{
+	switch (*pucNextHeader) {
 	case IPV6HDR_TYPE_HOPBYHOP:
 		{
 
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 HopByHop Header");
-			usNextHeaderOffset+=sizeof(IPV6HopByHopOptionsHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 HopByHop Header");
+			usNextHeaderOffset += sizeof(IPV6HopByHopOptionsHeader);
 		}
 		break;
 
 	case IPV6HDR_TYPE_ROUTING:
 		{
 			IPV6RoutingHeader *pstIpv6RoutingHeader;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Routing Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Routing Header");
 			pstIpv6RoutingHeader = (IPV6RoutingHeader *)pucPayloadPtr;
 			usNextHeaderOffset += sizeof(IPV6RoutingHeader);
 			usNextHeaderOffset += pstIpv6RoutingHeader->ucNumAddresses * IPV6_ADDRESS_SIZEINBYTES;
@@ -54,8 +55,10 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		break;
 	case IPV6HDR_TYPE_FRAGMENTATION:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Fragmentation Header");
-			usNextHeaderOffset+= sizeof(IPV6FragmentHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Fragmentation Header");
+			usNextHeaderOffset += sizeof(IPV6FragmentHeader);
 
 		}
 		break;
@@ -63,9 +66,11 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6DestOptionsHeader *pstIpv6DestOptsHdr = (IPV6DestOptionsHeader *)pucPayloadPtr;
 			int nTotalOptions = pstIpv6DestOptsHdr->ucHdrExtLen;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 DestOpts Header Header");
-			usNextHeaderOffset+= sizeof(IPV6DestOptionsHeader);
-			usNextHeaderOffset+= nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 DestOpts Header Header");
+			usNextHeaderOffset += sizeof(IPV6DestOptionsHeader);
+			usNextHeaderOffset += nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;
 
 		}
 		break;
@@ -73,36 +78,43 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6AuthenticationHeader *pstIpv6AuthHdr = (IPV6AuthenticationHeader *)pucPayloadPtr;
 			int nHdrLen = pstIpv6AuthHdr->ucLength;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Authentication Header");
-			usNextHeaderOffset+= nHdrLen * 4;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Authentication Header");
+			usNextHeaderOffset += nHdrLen * 4;
 		}
 		break;
 	case IPV6HDR_TYPE_ENCRYPTEDSECURITYPAYLOAD:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Encrypted Security Payload Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Encrypted Security Payload Header");
 			*bParseDone = TRUE;
 
 		}
 		break;
 	case IPV6_ICMP_HDR_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " ICMP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nICMP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case TCP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nTCP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nTCP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case UDP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nUDP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nUDP Header");
 			*bParseDone = TRUE;
 		}
 		break;
-	default :
+	default:
 		{
 			*bParseDone = TRUE;
 
@@ -112,53 +124,49 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 
 	}
 
-	if(*bParseDone == FALSE)
-	{
-		if(*pusPayloadLength <= usNextHeaderOffset)
-		{
+	if (*bParseDone == FALSE) {
+		if (*pusPayloadLength <= usNextHeaderOffset) {
 			*bParseDone = TRUE;
-		}
-		else
-		{
+		} else {
 			*pucNextHeader = *pucPayloadPtr;
-			pucPayloadPtr+=usNextHeaderOffset;
-			(*pusPayloadLength)-=usNextHeaderOffset;
+			pucPayloadPtr += usNextHeaderOffset;
+			(*pusPayloadLength) -= usNextHeaderOffset;
 		}
 
 	}
 
-
-
 	*ppucPayload = pucPayloadPtr;
 	return pucRetHeaderPtr;
 }
 
 
-static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *pusDestPort,USHORT usPayloadLength,UCHAR ucNextHeader)
+static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload, USHORT *pusSrcPort,
+	USHORT *pusDestPort, USHORT usPayloadLength, UCHAR ucNextHeader)
 {
 	UCHAR *pIpv6HdrScanContext = pucPayload;
 	BOOLEAN bDone = FALSE;
-	UCHAR ucHeaderType =0;
+	UCHAR ucHeaderType = 0;
 	UCHAR *pucNextHeader = NULL;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
-	if( !pucPayload || (usPayloadLength == 0))
-	{
+	if (!pucPayload || (usPayloadLength == 0))
 		return 0;
-	}
 
 	*pusSrcPort = *pusDestPort = 0;
 	ucHeaderType = ucNextHeader;
-	while(!bDone)
-	{
-		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,&ucHeaderType,&bDone,&usPayloadLength);
-		if(bDone)
-		{
-			if((ucHeaderType==TCP_HEADER_TYPE) || (ucHeaderType == UDP_HEADER_TYPE))
-			{
-				 *pusSrcPort=*((PUSHORT)(pucNextHeader));
-				 *pusDestPort=*((PUSHORT)(pucNextHeader+2));
-				 BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",ntohs(*pusSrcPort),ntohs(*pusDestPort));
+	while (!bDone) {
+		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,
+					&ucHeaderType, &bDone, &usPayloadLength);
+		if (bDone) {
+			if ((ucHeaderType == TCP_HEADER_TYPE) ||
+				(ucHeaderType == UDP_HEADER_TYPE)) {
+				*pusSrcPort = *((PUSHORT)(pucNextHeader));
+				*pusDestPort = *((PUSHORT)(pucNextHeader+2));
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"\nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",
+						ntohs(*pusSrcPort),
+						ntohs(*pusDestPort));
 			}
 			break;
 
@@ -168,92 +176,111 @@ static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *p
 }
 
 
-
-USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control structure */
-					PVOID pcIpHeader, /**<Pointer to the IP Hdr of the packet*/
-					S_CLASSIFIER_RULE *pstClassifierRule )
+/*
+ * Arg 1 PMINI_ADAPTER Adapter is a pointer ot the driver contorl structure
+ * Arg 2 PVOID pcIpHeader is a pointer to the IP header of the packet
+ */
+USHORT	IpVersion6(PMINI_ADAPTER Adapter, PVOID pcIpHeader,
+					S_CLASSIFIER_RULE *pstClassifierRule)
 {
 	USHORT	ushDestPort = 0;
 	USHORT	ushSrcPort = 0;
-	UCHAR   ucNextProtocolAboveIP =0;
+	UCHAR   ucNextProtocolAboveIP = 0;
 	IPV6Header *pstIpv6Header = NULL;
 	BOOLEAN bClassificationSucceed = FALSE;
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "IpVersion6 ==========>\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+			DBG_LVL_ALL, "IpVersion6 ==========>\n");
 
 	pstIpv6Header = (IPV6Header *)pcIpHeader;
 
 	DumpIpv6Header(pstIpv6Header);
 
-	//Try to get the next higher layer protocol and the Ports Nos if TCP or UDP
+	/*
+	 * Try to get the next higher layer protocol
+	 * and the Ports Nos if TCP or UDP
+	 */
 	ucNextProtocolAboveIP = GetIpv6ProtocolPorts((UCHAR *)(pcIpHeader + sizeof(IPV6Header)),
 							&ushSrcPort,
 							&ushDestPort,
 							pstIpv6Header->usPayloadLength,
 							pstIpv6Header->ucNextHeader);
 
-	do
-	{
-		if(0 == pstClassifierRule->ucDirection)
-		{
-			//cannot be processed for classification.
-		   // it is a down link connection
+	do {
+		if (pstClassifierRule->ucDirection == 0) {
+			/*
+			 * cannot be processed for classification.
+			 * it is a down link connection
+			 */
 			break;
 		}
 
-		if(!pstClassifierRule->bIpv6Protocol)
-		{
-			//We are looking for Ipv6 Classifiers . Lets ignore this classifier and try the next one.
+		if (!pstClassifierRule->bIpv6Protocol) {
+			/*
+			 * We are looking for Ipv6 Classifiers
+			 * Lets ignore this classifier and try the next one
+			 */
 			break;
 		}
 
-		bClassificationSucceed=MatchSrcIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchSrcIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;
 
-        bClassificationSucceed=MatchDestIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchDestIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;
 
-		//Match the protocol type.For IPv6 the next protocol at end of Chain of IPv6 prot headers
-		bClassificationSucceed=MatchProtocol(pstClassifierRule,ucNextProtocolAboveIP);
-        if(!bClassificationSucceed)
-            break;
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+		/*
+		 * Match the protocol type.
+		 * For IPv6 the next protocol at end of
+		 * Chain of IPv6 prot headers
+		 */
+		bClassificationSucceed = MatchProtocol(pstClassifierRule,
+							ucNextProtocolAboveIP);
+		if (!bClassificationSucceed)
+			break;
 
-		if((ucNextProtocolAboveIP == TCP_HEADER_TYPE) || (ucNextProtocolAboveIP == UDP_HEADER_TYPE))
-		{
-			//Match Src Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",ntohs(ushSrcPort));
-			bClassificationSucceed=MatchSrcPort(pstClassifierRule,ntohs(ushSrcPort));
-			if(!bClassificationSucceed)
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+				DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+
+		if ((ucNextProtocolAboveIP == TCP_HEADER_TYPE) ||
+			(ucNextProtocolAboveIP == UDP_HEADER_TYPE)) {
+			/* Match Src Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",
+					ntohs(ushSrcPort));
+			bClassificationSucceed = MatchSrcPort(pstClassifierRule,
+							ntohs(ushSrcPort));
+			if (!bClassificationSucceed)
 				break;
 
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Src Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Src Port Matched");
 
-			//Match Dest Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",ntohs(ushDestPort));
-			bClassificationSucceed=MatchDestPort(pstClassifierRule,ntohs(ushDestPort));
-			if(!bClassificationSucceed)
+			/* Match Dest Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",
+					ntohs(ushDestPort));
+			bClassificationSucceed = MatchDestPort(pstClassifierRule,
+							ntohs(ushDestPort));
+			if (!bClassificationSucceed)
 				break;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
 		}
-	}while(0);
+	} while (0);
 
-	if(TRUE==bClassificationSucceed)
-	{
+	if (bClassificationSucceed == TRUE) {
 		INT iMatchedSFQueueIndex = 0;
-		iMatchedSFQueueIndex = SearchSfid(Adapter,pstClassifierRule->ulSFID);
-		if(iMatchedSFQueueIndex >= NO_OF_QUEUES)
-		{
+		iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID);
+		if (iMatchedSFQueueIndex >= NO_OF_QUEUES) {
 			bClassificationSucceed = FALSE;
-		}
-		else
-		{
-			if(FALSE == Adapter->PackInfo[iMatchedSFQueueIndex].bActive)
-			{
+		} else {
+			if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == FALSE)
 				bClassificationSucceed = FALSE;
-			}
 		}
 	}
 
@@ -261,52 +288,55 @@ USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control stru
 }
 
 
-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulSrcIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Src Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Src Addresses ie Range of IP Addresses contained
+	 * in the classifier rule for which we need to match
+	 */
 	UINT  uiCountIPSrcAddresses = (UINT)pstClassifierRule->ucIPSourceAddressLength;
 
 
-	if(0 == uiCountIPSrcAddresses)
+	if (uiCountIPSrcAddresses == 0)
 		return TRUE;
 
 
-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulSrcIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulSrcIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
 
-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPSrcAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulSrcIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Mask In Classifier Rule:\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex]);
 
-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}
 
-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Src Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Src Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@@ -314,52 +344,56 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 	return FALSE;
 }
 
-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulDestIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Destination Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Destination Addresses
+	 * ie Range of IP Addresses contained in the classifier rule
+	 * for which we need to match
+	 */
 	UINT  uiCountIPDestinationAddresses = (UINT)pstClassifierRule->ucIPDestinationAddressLength;
 
 
-	if(0 == uiCountIPDestinationAddresses)
+	if (uiCountIPDestinationAddresses == 0)
 		return TRUE;
 
 
-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulDestIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulDestIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);
 
-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPDestinationAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulDestIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Mask In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex]);
 
-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address.
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}
 
-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Destination Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Destination Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@@ -371,11 +405,11 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 VOID DumpIpv6Address(ULONG *puIpv6Address)
 {
 	UINT uiIpv6AddrNoLongWords = 4;
-	UINT  uiIpv6AddIndex=0;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, ":%lx",puIpv6Address[uiIpv6AddIndex]);
+	UINT uiIpv6AddIndex = 0;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				":%lx", puIpv6Address[uiIpv6AddIndex]);
 	}
 
 }
@@ -383,22 +417,35 @@ VOID DumpIpv6Address(ULONG *puIpv6Address)
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header)
 {
 	UCHAR ucVersion;
-	UCHAR  ucPrio ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header---");
+	UCHAR ucPrio;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header---");
 	ucVersion = pstIpv6Header->ucVersionPrio & 0xf0;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Version : %x \n",ucVersion);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Version : %x\n", ucVersion);
 	ucPrio = pstIpv6Header->ucVersionPrio & 0x0f;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Priority : %x \n",ucPrio);
-	//BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Flow Label : %x \n",(pstIpv6Header->ucVersionPrio &0xf0);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Payload Length : %x \n",ntohs(pstIpv6Header->usPayloadLength));
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Next Header : %x \n",pstIpv6Header->ucNextHeader);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Hop Limit : %x \n",pstIpv6Header->ucHopLimit);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Src Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Priority : %x\n", ucPrio);
+	/*
+	 * BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+	 * "Flow Label : %x\n",(pstIpv6Header->ucVersionPrio &0xf0);
+	 */
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Payload Length : %x\n",
+			ntohs(pstIpv6Header->usPayloadLength));
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Next Header : %x\n", pstIpv6Header->ucNextHeader);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Hop Limit : %x\n", pstIpv6Header->ucHopLimit);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Src Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulSrcIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Dest Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Dest Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulDestIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header End---");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header End---");
 
 
 }
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index c7725e141fd5..8223a6913fc5 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 	Bcm_kill_all_URBs(psIntfAdapter);
 	/* Reset the UMA-B Device */
 	if (ps_adapter->chip_id >= T3LPB) {
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
 		retval = usb_reset_device(psIntfAdapter->udev);
 		psIntfAdapter->psAdapter->StopAllXaction = FALSE;
 
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 12c691d90900..a1cf0b04c16d 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -14,6 +14,26 @@ config COMEDI_DEBUG
 	  This is an option for use by developers; most people should
 	  say N here. This enables comedi core and driver debugging.
 
+config COMEDI_DEFAULT_BUF_SIZE_KB
+	int "Comedi default initial asynchronous buffer size in KiB"
+	default "2048"
+	depends on COMEDI != n
+	---help---
+	  This is the default asynchronous buffer size which is used for
+	  commands running in the background in kernel space.  This
+	  defaults to 2048 KiB of memory so that a 16 channel card
+	  running at 10 kHz has of 2-4 seconds of buffer.
+
+config COMEDI_DEFAULT_BUF_MAXSIZE_KB
+	int "Comedi default maximum asynchronous buffer size in KiB"
+	default "20480"
+	depends on COMEDI != n
+	---help---
+	  This is the default maximum asynchronous buffer size which can
+	  be requested by a userspace program without root privileges.
+	  This is set to 20480 KiB so that a fast I/O card with 16
+	  channels running at 100 kHz has 2-4 seconds of buffer.
+
 menuconfig COMEDI_MISC_DRIVERS
 	tristate "Comedi misc drivers"
 	depends on COMEDI
@@ -211,6 +231,38 @@ config COMEDI_PCM3730
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcm3730.
 
+config COMEDI_AMPLC_DIO200_ISA
+	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
+	select COMEDI_AMPLC_DIO200
+	depends on COMEDI_ISA_DRIVERS
+	default N
+	---help---
+	  Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
+	  PC272E ISA DIO boards
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_dio200.
+
+config COMEDI_AMPLC_PC236_ISA
+	tristate "Amplicon PC36AT DIO board support"
+	select COMEDI_AMPLC_PC236
+	default N
+	---help---
+	  Enable support for Amplicon PC36AT ISA DIO board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_pc236.
+
+config COMEDI_AMPLC_PC263_ISA
+	tristate "Amplicon PC263 relay board support"
+	select COMEDI_AMPLC_PC263
+	default N
+	---help---
+	  Enable support for Amplicon PC263 ISA relay board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_pc263.
+
 config COMEDI_RTI800
 	tristate "Analog Devices RTI-800/815 ISA card support"
 	default N
@@ -240,6 +292,20 @@ config COMEDI_DAS16M1
 	  To compile this driver as a module, choose M here: the module will be
 	  called das16m1.
 
+config COMEDI_DAS08_ISA
+	tristate "DAS-08 compatible ISA and PC/104 card support"
+	select COMEDI_DAS08
+	default N
+	---help---
+	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
+	  and compatible ISA and PC/104 cards:
+	  Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
+	  DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
+	  DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_DAS16
 	tristate "DAS-16 compatible ISA and PC/104 card support"
 	select COMEDI_8255
@@ -772,31 +838,32 @@ config COMEDI_ADV_PCI_DIO
 	  To compile this driver as a module, choose M here: the module will be
 	  called adv_pci_dio.
 
-config COMEDI_AMPLC_DIO200
-	tristate "Amplicon PC272E and PCI272 DIO board support"
-	select COMEDI_8255
+config COMEDI_AMPLC_DIO200_PCI
+	tristate "Amplicon PCI215 and PCI272 DIO board support"
+	select COMEDI_AMPLC_DIO200
 	default N
 	---help---
-	  Enable support for Amplicon PC272E and PCI272 DIO boards
+	  Enable support for Amplicon PCI215 and PCI272 DIO boards.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_dio200.
 
-config COMEDI_AMPLC_PC236
-	tristate "Amplicon PC36AT and PCI236 DIO board support"
-	select COMEDI_8255
+config COMEDI_AMPLC_PC236_PCI
+	tristate "Amplicon PCI236 DIO board support"
+	select COMEDI_AMPLC_PC236
 	default N
 	---help---
-	  Enable support for Amplicon PC36AT and PCI236 DIO boards
+	  Enable support for Amplicon PCI236 DIO board.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc236.
 
-config COMEDI_AMPLC_PC263
-	tristate "Amplicon PC263 and PCI263 relay board support"
+config COMEDI_AMPLC_PC263_PCI
+	tristate "Amplicon PCI263 relay board support"
+	select COMEDI_AMPLC_PC263
 	default N
 	---help---
-	  Enable support for Amplicon PC263 and PCI263 relay boards
+	  Enable support for Amplicon PCI263 relay board.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc263.
@@ -831,6 +898,16 @@ config COMEDI_CONTEC_PCI_DIO
 	  To compile this driver as a module, choose M here: the module will be
 	  called contec_pci_dio.
 
+config COMEDI_DAS08_PCI
+	tristate "DAS-08 PCI support"
+	select COMEDI_DAS08
+	default N
+	---help---
+	  Enable support for PCI DAS-08 cards.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_DT3000
 	tristate "Data Translation DT3000 series support"
 	default N
@@ -1357,20 +1434,6 @@ config COMEDI_8255
 	  To compile this driver as a module, choose M here: the module will be
 	  called 8255.
 
-config COMEDI_DAS08
-	tristate "DAS-08 compatible support"
-	depends on COMEDI
-	select COMEDI_8255
-	default N
-	---help---
-	  Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
-
-	  Note that PCMCIA DAS08 cards are not directly supported by this
-	  driver, and need a separate driver as a wrapper.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called das08.
-
 config COMEDI_FC
 	tristate "Comedi shared functions for low-level driver support"
 	depends on COMEDI
@@ -1382,3 +1445,22 @@ config COMEDI_FC
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called comedi_fc.
+
+config COMEDI_AMPLC_DIO200
+	def_tristate N
+	depends on COMEDI
+	select COMEDI_8255
+
+config COMEDI_AMPLC_PC236
+	def_tristate N
+	depends on COMEDI
+	select COMEDI_8255
+
+config COMEDI_AMPLC_PC263
+	def_tristate N
+	depends on COMEDI
+
+config COMEDI_DAS08
+	def_tristate N
+	depends on COMEDI
+	select COMEDI_8255
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 14ea35ac0156..8ea55aef10a7 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -465,7 +465,7 @@
 /* only relevant to kernel modules. */
 
 #define COMEDI_CB_EOS		1	/* end of scan */
-#define COMEDI_CB_EOA		2	/* end of acquisition */
+#define COMEDI_CB_EOA		2	/* end of acquisition/output */
 #define COMEDI_CB_BLOCK		4	/* data has arrived:
 					 * wakes up read() / write() */
 #define COMEDI_CB_EOBUF		8	/* DEPRECATED: end of buffer */
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 9bcf87ae4c00..06fc6569c859 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -58,14 +58,35 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_COMEDI_DEBUG
 int comedi_debug;
 EXPORT_SYMBOL(comedi_debug);
-module_param(comedi_debug, int, 0644);
+module_param(comedi_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_debug,
+		 "enable comedi core and driver debugging if non-zero (default 0)"
+		);
 #endif
 
 bool comedi_autoconfig = 1;
-module_param(comedi_autoconfig, bool, 0444);
+module_param(comedi_autoconfig, bool, S_IRUGO);
+MODULE_PARM_DESC(comedi_autoconfig,
+		 "enable drivers to auto-configure comedi devices (default 1)");
 
 static int comedi_num_legacy_minors;
-module_param(comedi_num_legacy_minors, int, 0444);
+module_param(comedi_num_legacy_minors, int, S_IRUGO);
+MODULE_PARM_DESC(comedi_num_legacy_minors,
+		 "number of comedi minor devices to reserve for non-auto-configured devices (default 0)"
+		);
+
+unsigned int comedi_default_buf_size_kb = CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB;
+module_param(comedi_default_buf_size_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_size_kb,
+		 "default asynchronous buffer size in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) ")");
+
+unsigned int comedi_default_buf_maxsize_kb
+	= CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB;
+module_param(comedi_default_buf_maxsize_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_maxsize_kb,
+		 "default maximum size of asynchronous buffer in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) ")");
 
 static DEFINE_SPINLOCK(comedi_file_info_table_lock);
 static struct comedi_device_file_info
@@ -280,7 +301,7 @@ static int do_devconfig_ioctl(struct comedi_device *dev,
 	if (ret == 0) {
 		if (!try_module_get(dev->driver->module)) {
 			comedi_device_detach(dev);
-			return -ENOSYS;
+			ret = -ENOSYS;
 		}
 	}
 
@@ -1545,7 +1566,7 @@ done:
 	return retval;
 }
 
-static unsigned int comedi_poll(struct file *file, poll_table * wait)
+static unsigned int comedi_poll(struct file *file, poll_table *wait)
 {
 	unsigned int mask = 0;
 	const unsigned minor = iminor(file->f_dentry->d_inode);
@@ -2192,7 +2213,6 @@ static void comedi_device_cleanup(struct comedi_device *dev)
 
 int comedi_alloc_board_minor(struct device *hardware_device)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
@@ -2206,15 +2226,16 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 		kfree(info);
 		return -ENOMEM;
 	}
+	info->hardware_device = hardware_device;
 	comedi_device_init(info->device);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_BOARD_MINORS) {
 		comedi_device_cleanup(info->device);
 		kfree(info->device);
@@ -2271,14 +2292,13 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 
 void comedi_free_board_minor(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
 	comedi_file_info_table[minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 
 	if (info) {
 		struct comedi_device *dev = info->device;
@@ -2294,10 +2314,26 @@ void comedi_free_board_minor(unsigned minor)
 	}
 }
 
+int comedi_find_board_minor(struct device *hardware_device)
+{
+	int minor;
+	struct comedi_device_file_info *info;
+
+	for (minor = 0; minor < COMEDI_NUM_BOARD_MINORS; minor++) {
+		spin_lock(&comedi_file_info_table_lock);
+		info = comedi_file_info_table[minor];
+		if (info && info->hardware_device == hardware_device) {
+			spin_unlock(&comedi_file_info_table_lock);
+			return minor;
+		}
+		spin_unlock(&comedi_file_info_table_lock);
+	}
+	return -ENODEV;
+}
+
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
@@ -2309,14 +2345,14 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 	info->device = dev;
 	info->read_subdevice = s;
 	info->write_subdevice = s;
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_MINORS) {
 		kfree(info);
 		printk(KERN_ERR
@@ -2372,7 +2408,6 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 
 void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	if (s == NULL)
@@ -2383,10 +2418,10 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 	BUG_ON(s->minor >= COMEDI_NUM_MINORS);
 	BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR);
 
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[s->minor];
 	comedi_file_info_table[s->minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 
 	if (s->class_dev) {
 		device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor));
@@ -2397,13 +2432,12 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 
 struct comedi_device_file_info *comedi_get_device_file_info(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	return info;
 }
 EXPORT_SYMBOL_GPL(comedi_get_device_file_info);
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 7a0d4bcbc355..02e4ae0643a7 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -180,6 +180,9 @@ struct comedi_async {
 			unsigned int x);
 };
 
+struct pci_dev;
+struct usb_interface;
+
 struct comedi_driver {
 	struct comedi_driver *next;
 
@@ -187,6 +190,8 @@ struct comedi_driver {
 	struct module *module;
 	int (*attach) (struct comedi_device *, struct comedi_devconfig *);
 	int (*detach) (struct comedi_device *);
+	int (*attach_pci) (struct comedi_device *, struct pci_dev *);
+	int (*attach_usb) (struct comedi_device *, struct usb_interface *);
 
 	/* number of elements in board_name and board_id arrays */
 	unsigned int num_names;
@@ -230,10 +235,16 @@ struct comedi_device {
 	void (*close) (struct comedi_device *dev);
 };
 
+static inline const void *comedi_board(struct comedi_device *dev)
+{
+	return dev->board_ptr;
+}
+
 struct comedi_device_file_info {
 	struct comedi_device *device;
 	struct comedi_subdevice *read_subdevice;
 	struct comedi_subdevice *write_subdevice;
+	struct device *hardware_device;
 };
 
 #ifdef CONFIG_COMEDI_DEBUG
@@ -456,11 +467,12 @@ static inline void *comedi_aux_data(int options[], int n)
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s);
 void comedi_free_subdevice_minor(struct comedi_subdevice *s);
-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name);
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+			   struct comedi_driver *driver);
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
-struct usb_device;		/* forward declaration */
-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name);
-void comedi_usb_auto_unconfig(struct usb_device *usbdev);
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver);
+void comedi_usb_auto_unconfig(struct usb_interface *intf);
 
 #ifdef CONFIG_COMEDI_PCI_DRIVERS
 #define CONFIG_COMEDI_PCI
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index bf185e2807d1..49681a1a6fa6 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -106,6 +106,26 @@ void comedi_device_detach(struct comedi_device *dev)
 	__comedi_device_detach(dev);
 }
 
+/* do a little post-config cleanup */
+/* called with module refcount incremented, decrements it */
+static int comedi_device_postconfig(struct comedi_device *dev)
+{
+	int ret = postconfig(dev);
+	module_put(dev->driver->module);
+	if (ret < 0) {
+		__comedi_device_detach(dev);
+		return ret;
+	}
+	if (!dev->board_name) {
+		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
+		       dev->board_name);
+		dev->board_name = "BUG";
+	}
+	smp_wmb();
+	dev->attached = 1;
+	return 0;
+}
+
 int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_driver *driv;
@@ -121,59 +141,36 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 		if (driv->num_names) {
 			dev->board_ptr = comedi_recognize(driv, it->board_name);
-			if (dev->board_ptr == NULL) {
-				module_put(driv->module);
-				continue;
-			}
-		} else {
-			if (strcmp(driv->driver_name, it->board_name)) {
-				module_put(driv->module);
+			if (dev->board_ptr)
+				break;
+		} else if (strcmp(driv->driver_name, it->board_name))
+			break;
+		module_put(driv->module);
+	}
+	if (driv == NULL) {
+		/*  recognize has failed if we get here */
+		/*  report valid board names before returning error */
+		for (driv = comedi_drivers; driv; driv = driv->next) {
+			if (!try_module_get(driv->module)) {
+				printk(KERN_INFO
+				       "comedi: failed to increment module count\n");
 				continue;
 			}
+			comedi_report_boards(driv);
+			module_put(driv->module);
 		}
-		/* initialize dev->driver here so
-		 * comedi_error() can be called from attach */
-		dev->driver = driv;
-		ret = driv->attach(dev, it);
-		if (ret < 0) {
-			module_put(dev->driver->module);
-			__comedi_device_detach(dev);
-			return ret;
-		}
-		goto attached;
-	}
-
-	/*  recognize has failed if we get here */
-	/*  report valid board names before returning error */
-	for (driv = comedi_drivers; driv; driv = driv->next) {
-		if (!try_module_get(driv->module)) {
-			printk(KERN_INFO
-			       "comedi: failed to increment module count\n");
-			continue;
-		}
-		comedi_report_boards(driv);
-		module_put(driv->module);
+		return -EIO;
 	}
-	return -EIO;
-
-attached:
-	/* do a little post-config cleanup */
-	ret = postconfig(dev);
-	module_put(dev->driver->module);
+	/* initialize dev->driver here so
+	 * comedi_error() can be called from attach */
+	dev->driver = driv;
+	ret = driv->attach(dev, it);
 	if (ret < 0) {
+		module_put(dev->driver->module);
 		__comedi_device_detach(dev);
 		return ret;
 	}
-
-	if (!dev->board_name) {
-		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
-		       dev->board_name);
-		dev->board_name = "BUG";
-	}
-	smp_wmb();
-	dev->attached = 1;
-
-	return 0;
+	return comedi_device_postconfig(dev);
 }
 
 int comedi_driver_register(struct comedi_driver *driver)
@@ -242,6 +239,8 @@ static int postconfig(struct comedi_device *dev)
 			s->len_chanlist = 1;
 
 		if (s->do_cmd) {
+			unsigned int buf_size;
+
 			BUG_ON((s->subdev_flags & (SDF_CMD_READ |
 						   SDF_CMD_WRITE)) == 0);
 			BUG_ON(!s->do_cmdtest);
@@ -257,19 +256,20 @@ static int postconfig(struct comedi_device *dev)
 			async->subdevice = s;
 			s->async = async;
 
-#define DEFAULT_BUF_MAXSIZE (64*1024)
-#define DEFAULT_BUF_SIZE (64*1024)
-
-			async->max_bufsize = DEFAULT_BUF_MAXSIZE;
+			async->max_bufsize =
+				comedi_default_buf_maxsize_kb * 1024;
+			buf_size = comedi_default_buf_size_kb * 1024;
+			if (buf_size > async->max_bufsize)
+				buf_size = async->max_bufsize;
 
 			async->prealloc_buf = NULL;
 			async->prealloc_bufsz = 0;
-			if (comedi_buf_alloc(dev, s, DEFAULT_BUF_SIZE) < 0) {
+			if (comedi_buf_alloc(dev, s, buf_size) < 0) {
 				printk(KERN_INFO "Buffer allocation failed\n");
 				return -ENOMEM;
 			}
 			if (s->buf_change) {
-				ret = s->buf_change(dev, s, DEFAULT_BUF_SIZE);
+				ret = s->buf_change(dev, s, buf_size);
 				if (ret < 0)
 					return ret;
 			}
@@ -814,67 +814,102 @@ void comedi_reset_async_buf(struct comedi_async *async)
 	async->events = 0;
 }
 
-static int comedi_auto_config(struct device *hardware_device,
-			      const char *board_name, const int *options,
-			      unsigned num_options)
+static int
+comedi_auto_config_helper(struct device *hardware_device,
+			  struct comedi_driver *driver,
+			  int (*attach_wrapper) (struct comedi_device *,
+						 void *), void *context)
 {
-	struct comedi_devconfig it;
 	int minor;
 	struct comedi_device_file_info *dev_file_info;
-	int retval;
-	unsigned *private_data = NULL;
+	struct comedi_device *comedi_dev;
+	int ret;
 
-	if (!comedi_autoconfig) {
-		dev_set_drvdata(hardware_device, NULL);
+	if (!comedi_autoconfig)
 		return 0;
-	}
 
 	minor = comedi_alloc_board_minor(hardware_device);
 	if (minor < 0)
 		return minor;
 
-	private_data = kmalloc(sizeof(unsigned), GFP_KERNEL);
-	if (private_data == NULL) {
-		retval = -ENOMEM;
-		goto cleanup;
+	dev_file_info = comedi_get_device_file_info(minor);
+	comedi_dev = dev_file_info->device;
+
+	mutex_lock(&comedi_dev->mutex);
+	if (comedi_dev->attached)
+		ret = -EBUSY;
+	else if (!try_module_get(driver->module)) {
+		printk(KERN_INFO "comedi: failed to increment module count\n");
+		ret = -EIO;
+	} else {
+		/* set comedi_dev->driver here for attach wrapper */
+		comedi_dev->driver = driver;
+		ret = (*attach_wrapper)(comedi_dev, context);
+		if (ret < 0) {
+			module_put(driver->module);
+			__comedi_device_detach(comedi_dev);
+		} else {
+			ret = comedi_device_postconfig(comedi_dev);
+		}
+	}
+	mutex_unlock(&comedi_dev->mutex);
+
+	if (ret < 0)
+		comedi_free_board_minor(minor);
+	return ret;
+}
+
+static int comedi_auto_config_wrapper(struct comedi_device *dev, void *context)
+{
+	struct comedi_devconfig *it = context;
+	struct comedi_driver *driv = dev->driver;
+
+	if (driv->num_names) {
+		/* look for generic board entry matching driver name, which
+		 * has already been copied to it->board_name */
+		dev->board_ptr = comedi_recognize(driv, it->board_name);
+		if (dev->board_ptr == NULL) {
+			printk(KERN_WARNING
+			       "comedi: auto config failed to find board entry"
+			       " '%s' for driver '%s'\n", it->board_name,
+			       driv->driver_name);
+			comedi_report_boards(driv);
+			return -EINVAL;
+		}
 	}
-	*private_data = minor;
-	dev_set_drvdata(hardware_device, private_data);
+	return driv->attach(dev, it);
+}
 
-	dev_file_info = comedi_get_device_file_info(minor);
+static int comedi_auto_config(struct device *hardware_device,
+			      struct comedi_driver *driver, const int *options,
+			      unsigned num_options)
+{
+	struct comedi_devconfig it;
 
 	memset(&it, 0, sizeof(it));
-	strncpy(it.board_name, board_name, COMEDI_NAMELEN);
+	strncpy(it.board_name, driver->driver_name, COMEDI_NAMELEN);
 	it.board_name[COMEDI_NAMELEN - 1] = '\0';
 	BUG_ON(num_options > COMEDI_NDEVCONFOPTS);
 	memcpy(it.options, options, num_options * sizeof(int));
-
-	mutex_lock(&dev_file_info->device->mutex);
-	retval = comedi_device_attach(dev_file_info->device, &it);
-	mutex_unlock(&dev_file_info->device->mutex);
-
-cleanup:
-	if (retval < 0) {
-		kfree(private_data);
-		comedi_free_board_minor(minor);
-	}
-	return retval;
+	return comedi_auto_config_helper(hardware_device, driver,
+					 comedi_auto_config_wrapper, &it);
 }
 
 static void comedi_auto_unconfig(struct device *hardware_device)
 {
-	unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device);
-	if (minor == NULL)
-		return;
-
-	BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS);
+	int minor;
 
-	comedi_free_board_minor(*minor);
-	dev_set_drvdata(hardware_device, NULL);
-	kfree(minor);
+	if (hardware_device == NULL)
+		return;
+	minor = comedi_find_board_minor(hardware_device);
+	if (minor < 0)
+		return;
+	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
+	comedi_free_board_minor(minor);
 }
 
-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
+static int comedi_old_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
 {
 	int options[2];
 
@@ -883,9 +918,30 @@ int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
 	/*  pci slot */
 	options[1] = PCI_SLOT(pcidev->devfn);
 
-	return comedi_auto_config(&pcidev->dev, board_name,
+	return comedi_auto_config(&pcidev->dev, driver,
 				  options, ARRAY_SIZE(options));
 }
+
+static int comedi_pci_attach_wrapper(struct comedi_device *dev, void *pcidev)
+{
+	return dev->driver->attach_pci(dev, pcidev);
+}
+
+static int comedi_new_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&pcidev->dev, driver,
+					 comedi_pci_attach_wrapper, pcidev);
+}
+
+int comedi_pci_auto_config(struct pci_dev *pcidev, struct comedi_driver *driver)
+{
+
+	if (driver->attach_pci)
+		return comedi_new_pci_auto_config(pcidev, driver);
+	else
+		return comedi_old_pci_auto_config(pcidev, driver);
+}
 EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
 
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
@@ -894,16 +950,38 @@ void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
 }
 EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
 
-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name)
+static int comedi_old_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
 {
-	BUG_ON(usbdev == NULL);
-	return comedi_auto_config(&usbdev->dev, board_name, NULL, 0);
+	return comedi_auto_config(&intf->dev, driver, NULL, 0);
+}
+
+static int comedi_usb_attach_wrapper(struct comedi_device *dev, void *intf)
+{
+	return dev->driver->attach_usb(dev, intf);
+}
+
+static int comedi_new_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&intf->dev, driver,
+					 comedi_usb_attach_wrapper, intf);
+}
+
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver)
+{
+	BUG_ON(intf == NULL);
+	if (driver->attach_usb)
+		return comedi_new_usb_auto_config(intf, driver);
+	else
+		return comedi_old_usb_auto_config(intf, driver);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_config);
 
-void comedi_usb_auto_unconfig(struct usb_device *usbdev)
+void comedi_usb_auto_unconfig(struct usb_interface *intf)
 {
-	BUG_ON(usbdev == NULL);
-	comedi_auto_unconfig(&usbdev->dev);
+	BUG_ON(intf == NULL);
+	comedi_auto_unconfig(&intf->dev);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig);
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 6c26ac887eee..ed803976b741 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -107,31 +107,6 @@ struct subdev_8255_struct {
 #define CALLBACK_FUNC	(((struct subdev_8255_struct *)s->private)->cb_func)
 #define subdevpriv	((struct subdev_8255_struct *)s->private)
 
-static int dev_8255_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int dev_8255_detach(struct comedi_device *dev);
-static struct comedi_driver driver_8255 = {
-	.driver_name = "8255",
-	.module = THIS_MODULE,
-	.attach = dev_8255_attach,
-	.detach = dev_8255_detach,
-};
-
-static int __init driver_8255_init_module(void)
-{
-	return comedi_driver_register(&driver_8255);
-}
-
-static void __exit driver_8255_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_8255);
-}
-
-module_init(driver_8255_init_module);
-module_exit(driver_8255_cleanup_module);
-
-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s);
-
 void subdev_8255_interrupt(struct comedi_device *dev,
 			   struct comedi_subdevice *s)
 {
@@ -185,6 +160,23 @@ static int subdev_8255_insn(struct comedi_device *dev,
 	return 2;
 }
 
+static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+	int config;
+
+	config = CR_CW;
+	/* 1 in io_bits indicates output, 1 in config indicates input */
+	if (!(s->io_bits & 0x0000ff))
+		config |= CR_A_IO;
+	if (!(s->io_bits & 0x00ff00))
+		config |= CR_B_IO;
+	if (!(s->io_bits & 0x0f0000))
+		config |= CR_C_LO_IO;
+	if (!(s->io_bits & 0xf00000))
+		config |= CR_C_HI_IO;
+	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
+}
+
 static int subdev_8255_insn_config(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data)
@@ -222,23 +214,6 @@ static int subdev_8255_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
-{
-	int config;
-
-	config = CR_CW;
-	/* 1 in io_bits indicates output, 1 in config indicates input */
-	if (!(s->io_bits & 0x0000ff))
-		config |= CR_A_IO;
-	if (!(s->io_bits & 0x00ff00))
-		config |= CR_B_IO;
-	if (!(s->io_bits & 0x0f0000))
-		config |= CR_C_LO_IO;
-	if (!(s->io_bits & 0xf00000))
-		config |= CR_C_HI_IO;
-	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
-}
-
 static int subdev_8255_cmdtest(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_cmd *cmd)
@@ -462,6 +437,25 @@ static int dev_8255_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_8255 = {
+	.driver_name	= "8255",
+	.module		= THIS_MODULE,
+	.attach		= dev_8255_attach,
+	.detach		= dev_8255_detach,
+};
+
+static int __init driver_8255_init_module(void)
+{
+	return comedi_driver_register(&driver_8255);
+}
+module_init(driver_8255_init_module);
+
+static void __exit driver_8255_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_8255);
+}
+module_exit(driver_8255_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/acl7225b.c b/drivers/staging/comedi/drivers/acl7225b.c
index 9def2250bb80..ef685fc49b45 100644
--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@@ -22,46 +22,13 @@ Devices: [Adlink] ACL-7225b (acl7225b), [ICP] P16R16DIO (p16r16dio)
 #define ACL7225_DI_LO  2	/* Digital input low byte (DI0-DI7) */
 #define ACL7225_DI_HI  3	/* Digital input high byte (DI8-DI15) */
 
-static int acl7225b_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int acl7225b_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;	/*  driver name */
 	int io_range;		/*  len of I/O space */
 };
 
-static const struct boardtype boardtypes[] = {
-	{"acl7225b", ACL7225_SIZE,},
-	{"p16r16dio", P16R16DIO_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
 #define this_board ((const struct boardtype *)dev->board_ptr)
 
-static struct comedi_driver driver_acl7225b = {
-	.driver_name = "acl7225b",
-	.module = THIS_MODULE,
-	.attach = acl7225b_attach,
-	.detach = acl7225b_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __init driver_acl7225b_init_module(void)
-{
-	return comedi_driver_register(&driver_acl7225b);
-}
-
-static void __exit driver_acl7225b_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_acl7225b);
-}
-
-module_init(driver_acl7225b_init_module);
-module_exit(driver_acl7225b_cleanup_module);
-
 static int acl7225b_do_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -162,6 +129,33 @@ static int acl7225b_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct boardtype boardtypes[] = {
+	{ "acl7225b", ACL7225_SIZE, },
+	{ "p16r16dio", P16R16DIO_SIZE, },
+};
+
+static struct comedi_driver driver_acl7225b = {
+	.driver_name	= "acl7225b",
+	.module		= THIS_MODULE,
+	.attach		= acl7225b_attach,
+	.detach		= acl7225b_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct boardtype),
+};
+
+static int __init driver_acl7225b_init_module(void)
+{
+	return comedi_driver_register(&driver_acl7225b);
+}
+module_init(driver_acl7225b_init_module);
+
+static void __exit driver_acl7225b_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_acl7225b);
+}
+module_exit(driver_acl7225b_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index ca5bd9b8704a..5b5dae4ceddb 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -2528,14 +2528,12 @@ static const struct addi_board boardtypes[] = {
 #endif
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
-
 static struct comedi_driver driver_addi = {
 	.driver_name = ADDIDATA_DRIVER_NAME,
 	.module = THIS_MODULE,
 	.attach = i_ADDI_Attach,
 	.detach = i_ADDI_Detach,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.board_name = &boardtypes[0].pc_DriverName,
 	.offset = sizeof(struct addi_board),
 };
@@ -2543,7 +2541,7 @@ static struct comedi_driver driver_addi = {
 static int __devinit driver_addi_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_addi.driver_name);
+	return comedi_pci_auto_config(dev, &driver_addi);
 }
 
 static void __devexit driver_addi_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 4fc9e8520217..889d1476421d 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -85,17 +85,6 @@ static const struct pci6208_board pci6208_boards[] = {
 	 }
 };
 
-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci6208_pci_table);
-
 /* Will be initialized in pci6208_find device(). */
 #define thisboard ((const struct pci6208_board *)dev->board_ptr)
 
@@ -107,157 +96,6 @@ struct pci6208_private {
 
 #define devpriv ((struct pci6208_private *)dev->private)
 
-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci6208_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_pci6208 = {
-	.driver_name = PCI6208_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci6208_attach,
-	.detach = pci6208_detach,
-};
-
-static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pci6208.driver_name);
-}
-
-static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pci6208_pci_driver = {
-	.id_table = pci6208_pci_table,
-	.probe = &driver_pci6208_pci_probe,
-	.remove = __devexit_p(&driver_pci6208_pci_remove)
-};
-
-static int __init driver_pci6208_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci6208);
-	if (retval < 0)
-		return retval;
-
-	driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name;
-	return pci_register_driver(&driver_pci6208_pci_driver);
-}
-
-static void __exit driver_pci6208_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci6208_pci_driver);
-	comedi_driver_unregister(&driver_pci6208);
-}
-
-module_init(driver_pci6208_init_module);
-module_exit(driver_pci6208_cleanup_module);
-
-static int pci6208_find_device(struct comedi_device *dev, int bus, int slot);
-static int
-pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
-		  int dev_minor);
-
-/*read/write functions*/
-static int pci6208_ao_winsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int pci6208_ao_rinsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-/* static int pci6208_dio_insn_bits (struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int retval;
-	unsigned long io_base;
-
-	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
-
-	retval = alloc_private(dev, sizeof(struct pci6208_private));
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
-	if (retval < 0)
-		return retval;
-
-	dev->iobase = io_base;
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_subdevices(dev, 2) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
-	s->n_chan = thisboard->ao_chans;
-	s->maxdata = 0xffff;	/* 16-bit DAC */
-	s->range_table = &range_bipolar10;	/* this needs to be checked. */
-	s->insn_write = pci6208_ao_winsn;
-	s->insn_read = pci6208_ao_rinsn;
-
-	/* s=dev->subdevices+1; */
-	/* digital i/o subdevice */
-	/* s->type=COMEDI_SUBD_DIO; */
-	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
-	/* s->n_chan=16; */
-	/* s->maxdata=1; */
-	/* s->range_table=&range_digital; */
-	/* s->insn_bits = pci6208_dio_insn_bits; */
-	/* s->insn_config = pci6208_dio_insn_config; */
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci6208_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 static int pci6208_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -442,6 +280,125 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	return 0;
 }
 
+static int pci6208_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int retval;
+	unsigned long io_base;
+
+	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
+
+	retval = alloc_private(dev, sizeof(struct pci6208_private));
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
+	if (retval < 0)
+		return retval;
+
+	dev->iobase = io_base;
+	dev->board_name = thisboard->name;
+
+	if (alloc_subdevices(dev, 2) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
+	s->n_chan = thisboard->ao_chans;
+	s->maxdata = 0xffff;	/* 16-bit DAC */
+	s->range_table = &range_bipolar10;	/* this needs to be checked. */
+	s->insn_write = pci6208_ao_winsn;
+	s->insn_read = pci6208_ao_rinsn;
+
+	/* s=dev->subdevices+1; */
+	/* digital i/o subdevice */
+	/* s->type=COMEDI_SUBD_DIO; */
+	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
+	/* s->n_chan=16; */
+	/* s->maxdata=1; */
+	/* s->range_table=&range_digital; */
+	/* s->insn_bits = pci6208_dio_insn_bits; */
+	/* s->insn_config = pci6208_dio_insn_config; */
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
+}
+
+static int pci6208_detach(struct comedi_device *dev)
+{
+	printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor);
+
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
+
+	return 0;
+}
+
+static struct comedi_driver driver_pci6208 = {
+	.driver_name	= PCI6208_DRIVER_NAME,
+	.module		= THIS_MODULE,
+	.attach		= pci6208_attach,
+	.detach		= pci6208_detach,
+};
+
+static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &driver_pci6208);
+}
+
+static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+/* This is used by modprobe to translate PCI IDs to drivers.  Should
+ * only be used for PCI and ISA-PnP devices */
+static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, pci6208_pci_table);
+
+static struct pci_driver driver_pci6208_pci_driver = {
+	.id_table	= pci6208_pci_table,
+	.probe		= driver_pci6208_pci_probe,
+	.remove		= __devexit_p(driver_pci6208_pci_remove),
+};
+
+static int __init driver_pci6208_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci6208);
+	if (retval < 0)
+		return retval;
+
+	driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name;
+	return pci_register_driver(&driver_pci6208_pci_driver);
+}
+module_init(driver_pci6208_init_module);
+
+static void __exit driver_pci6208_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci6208_pci_driver);
+	comedi_driver_unregister(&driver_pci6208);
+}
+module_exit(driver_pci6208_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7230.c b/drivers/staging/comedi/drivers/adl_pci7230.c
index 20d570554fa4..7bb66b0897ba 100644
--- a/drivers/staging/comedi/drivers/adl_pci7230.c
+++ b/drivers/staging/comedi/drivers/adl_pci7230.c
@@ -43,13 +43,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7230 0x7230
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);
-
 struct adl_pci7230_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -57,27 +50,36 @@ struct adl_pci7230_private {
 
 #define devpriv ((struct adl_pci7230_private *)dev->private)
 
-static int adl_pci7230_attach(struct comedi_device *dev,
-	struct comedi_devconfig *it);
-static int adl_pci7230_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7230 = {
-	.driver_name = "adl_pci7230",
-	.module = THIS_MODULE,
-	.attach = adl_pci7230_attach,
-	.detach = adl_pci7230_detach,
-};
+static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s,
+	struct comedi_insn *insn,
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-/* Digital IO */
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
+	}
+
+	return 2;
+}
 
 static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
 	struct comedi_subdevice *s,
 	struct comedi_insn *insn,
-	unsigned int *data);
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data);
+	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
+
+	return 2;
+}
 
 static int adl_pci7230_attach(struct comedi_device *dev,
 	struct comedi_devconfig *it)
@@ -161,42 +163,18 @@ static int adl_pci7230_detach(struct comedi_device *dev)
 	return 0;
 }
 
-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
-	}
-
-	return 2;
-}
-
-static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
-
-	return 2;
-}
+static struct comedi_driver driver_adl_pci7230 = {
+	.driver_name	= "adl_pci7230",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7230_attach,
+	.detach		= adl_pci7230_detach,
+};
 
 static int __devinit driver_adl_pci7230_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7230.driver_name);
+	return comedi_pci_auto_config(dev, &driver_adl_pci7230);
 }
 
 static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev)
@@ -204,10 +182,16 @@ static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);
+
 static struct pci_driver driver_adl_pci7230_pci_driver = {
-	.id_table = adl_pci7230_pci_table,
-	.probe = &driver_adl_pci7230_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7230_pci_remove)
+	.id_table	= adl_pci7230_pci_table,
+	.probe		= driver_adl_pci7230_pci_probe,
+	.remove		= __devexit_p(driver_adl_pci7230_pci_remove)
 };
 
 static int __init driver_adl_pci7230_init_module(void)
@@ -222,14 +206,13 @@ static int __init driver_adl_pci7230_init_module(void)
 	    (char *)driver_adl_pci7230.driver_name;
 	return pci_register_driver(&driver_adl_pci7230_pci_driver);
 }
+module_init(driver_adl_pci7230_init_module);
 
 static void __exit driver_adl_pci7230_cleanup_module(void)
 {
 	pci_unregister_driver(&driver_adl_pci7230_pci_driver);
 	comedi_driver_unregister(&driver_adl_pci7230);
 }
-
-module_init(driver_adl_pci7230_init_module);
 module_exit(driver_adl_pci7230_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adl_pci7296.c b/drivers/staging/comedi/drivers/adl_pci7296.c
index 9a2320537bdb..2bd749bac62e 100644
--- a/drivers/staging/comedi/drivers/adl_pci7296.c
+++ b/drivers/staging/comedi/drivers/adl_pci7296.c
@@ -48,13 +48,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7296 0x7296
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
-
 struct adl_pci7296_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -63,16 +56,6 @@ struct adl_pci7296_private {
 #define devpriv ((struct adl_pci7296_private *)dev->private)
 
 static int adl_pci7296_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7296_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7296 = {
-	.driver_name = "adl_pci7296",
-	.module = THIS_MODULE,
-	.attach = adl_pci7296_attach,
-	.detach = adl_pci7296_detach,
-};
-
-static int adl_pci7296_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev = NULL;
@@ -172,11 +155,18 @@ static int adl_pci7296_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_adl_pci7296 = {
+	.driver_name	= "adl_pci7296",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7296_attach,
+	.detach		= adl_pci7296_detach,
+};
+
 static int __devinit driver_adl_pci7296_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7296.driver_name);
+	return comedi_pci_auto_config(dev, &driver_adl_pci7296);
 }
 
 static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev)
@@ -184,10 +174,16 @@ static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
+
 static struct pci_driver driver_adl_pci7296_pci_driver = {
-	.id_table = adl_pci7296_pci_table,
-	.probe = &driver_adl_pci7296_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7296_pci_remove)
+	.id_table	= adl_pci7296_pci_table,
+	.probe		= driver_adl_pci7296_pci_probe,
+	.remove		= __devexit_p(driver_adl_pci7296_pci_remove)
 };
 
 static int __init driver_adl_pci7296_init_module(void)
@@ -202,14 +198,13 @@ static int __init driver_adl_pci7296_init_module(void)
 	    (char *)driver_adl_pci7296.driver_name;
 	return pci_register_driver(&driver_adl_pci7296_pci_driver);
 }
+module_init(driver_adl_pci7296_init_module);
 
 static void __exit driver_adl_pci7296_cleanup_module(void)
 {
 	pci_unregister_driver(&driver_adl_pci7296_pci_driver);
 	comedi_driver_unregister(&driver_adl_pci7296);
 }
-
-module_init(driver_adl_pci7296_init_module);
 module_exit(driver_adl_pci7296_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adl_pci7432.c b/drivers/staging/comedi/drivers/adl_pci7432.c
index 86ee21976041..db15ec6eb10a 100644
--- a/drivers/staging/comedi/drivers/adl_pci7432.c
+++ b/drivers/staging/comedi/drivers/adl_pci7432.c
@@ -43,13 +43,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7432 0x7432
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);
-
 struct adl_pci7432_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -57,29 +50,44 @@ struct adl_pci7432_private {
 
 #define devpriv ((struct adl_pci7432_private *)dev->private)
 
-static int adl_pci7432_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7432_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7432 = {
-	.driver_name = "adl_pci7432",
-	.module = THIS_MODULE,
-	.attach = adl_pci7432_attach,
-	.detach = adl_pci7432_detach,
-};
+static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
+				    struct comedi_subdevice *s,
+				    struct comedi_insn *insn,
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
+
+	if (insn->n != 2)
+		return -EINVAL;
 
-/* Digital IO */
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
+		       dev->iobase + PCI7432_DO);
+		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
+	}
+	return 2;
+}
 
 static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
 				    struct comedi_subdevice *s,
 				    struct comedi_insn *insn,
-				    unsigned int *data);
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
 
-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data);
+	if (insn->n != 2)
+		return -EINVAL;
 
-/*            */
+	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
+	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
+
+	return 2;
+}
 
 static int adl_pci7432_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@@ -166,50 +174,18 @@ static int adl_pci7432_detach(struct comedi_device *dev)
 	return 0;
 }
 
-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
-{
-	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
-		       dev->iobase + PCI7432_DO);
-		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
-	}
-	return 2;
-}
-
-static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
-{
-	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
-	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
-
-	return 2;
-}
+static struct comedi_driver driver_adl_pci7432 = {
+	.driver_name	= "adl_pci7432",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7432_attach,
+	.detach		= adl_pci7432_detach,
+};
 
 static int __devinit driver_adl_pci7432_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7432.driver_name);
+	return comedi_pci_auto_config(dev, &driver_adl_pci7432);
 }
 
 static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev)
@@ -217,10 +193,16 @@ static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);
+
 static struct pci_driver driver_adl_pci7432_pci_driver = {
-	.id_table = adl_pci7432_pci_table,
-	.probe = &driver_adl_pci7432_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7432_pci_remove)
+	.id_table	= adl_pci7432_pci_table,
+	.probe		= driver_adl_pci7432_pci_probe,
+	.remove		= __devexit_p(driver_adl_pci7432_pci_remove)
 };
 
 static int __init driver_adl_pci7432_init_module(void)
@@ -235,14 +217,13 @@ static int __init driver_adl_pci7432_init_module(void)
 	    (char *)driver_adl_pci7432.driver_name;
 	return pci_register_driver(&driver_adl_pci7432_pci_driver);
 }
+module_init(driver_adl_pci7432_init_module);
 
 static void __exit driver_adl_pci7432_cleanup_module(void)
 {
 	pci_unregister_driver(&driver_adl_pci7432_pci_driver);
 	comedi_driver_unregister(&driver_adl_pci7432);
 }
-
-module_init(driver_adl_pci7432_init_module);
 module_exit(driver_adl_pci7432_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 3b83d65bc1bc..6b32e45c0228 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -56,13 +56,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI8164 0x8164
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);
-
 struct adl_pci8164_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -70,159 +63,6 @@ struct adl_pci8164_private {
 
 #define devpriv ((struct adl_pci8164_private *)dev->private)
 
-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci8164_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci8164 = {
-	.driver_name = "adl_pci8164",
-	.module = THIS_MODULE,
-	.attach = adl_pci8164_attach,
-	.detach = adl_pci8164_detach,
-};
-
-static int adl_pci8164_insn_read_msts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_ssts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf0(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf1(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_cmd(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_otp(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_buf0(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it)
-{
-	struct pci_dev *pcidev = NULL;
-	struct comedi_subdevice *s;
-	int bus, slot;
-
-	printk(KERN_INFO "comedi: attempt to attach...\n");
-	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
-
-	dev->board_name = "pci8164";
-	bus = it->options[0];
-	slot = it->options[1];
-
-	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
-		return -ENOMEM;
-
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-	for_each_pci_dev(pcidev) {
-		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
-		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
-			if (bus || slot) {
-				/* requested particular bus/slot */
-				if (pcidev->bus->number != bus
-					|| PCI_SLOT(pcidev->devfn) != slot)
-					continue;
-			}
-			devpriv->pci_dev = pcidev;
-			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
-				printk(KERN_ERR "comedi%d: Failed to enable "
-				"PCI device and request regions\n", dev->minor);
-				return -EIO;
-			}
-			dev->iobase = pci_resource_start(pcidev, 2);
-			printk(KERN_DEBUG "comedi: base addr %4lx\n",
-				   dev->iobase);
-
-			s = dev->subdevices + 0;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_msts;
-			s->insn_write = adl_pci8164_insn_write_cmd;
-
-			s = dev->subdevices + 1;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_ssts;
-			s->insn_write = adl_pci8164_insn_write_otp;
-
-			s = dev->subdevices + 2;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf0;
-			s->insn_write = adl_pci8164_insn_write_buf0;
-
-			s = dev->subdevices + 3;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf1;
-			s->insn_write = adl_pci8164_insn_write_buf1;
-
-			printk(KERN_INFO "comedi: attached\n");
-
-			return 1;
-		}
-	}
-
-	printk(KERN_ERR "comedi%d: no supported board found!"
-		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
-	return -EIO;
-}
-
-static int adl_pci8164_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 /*
  all the read commands are the same except for the addition a constant
  * const to the data for inw()
@@ -384,11 +224,121 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
 	return 2;
 }
 
+static int adl_pci8164_attach(struct comedi_device *dev,
+			      struct comedi_devconfig *it)
+{
+	struct pci_dev *pcidev = NULL;
+	struct comedi_subdevice *s;
+	int bus, slot;
+
+	printk(KERN_INFO "comedi: attempt to attach...\n");
+	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
+
+	dev->board_name = "pci8164";
+	bus = it->options[0];
+	slot = it->options[1];
+
+	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
+		return -ENOMEM;
+
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+	for_each_pci_dev(pcidev) {
+		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
+		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
+			if (bus || slot) {
+				/* requested particular bus/slot */
+				if (pcidev->bus->number != bus
+					|| PCI_SLOT(pcidev->devfn) != slot)
+					continue;
+			}
+			devpriv->pci_dev = pcidev;
+			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
+				printk(KERN_ERR "comedi%d: Failed to enable "
+				"PCI device and request regions\n", dev->minor);
+				return -EIO;
+			}
+			dev->iobase = pci_resource_start(pcidev, 2);
+			printk(KERN_DEBUG "comedi: base addr %4lx\n",
+				   dev->iobase);
+
+			s = dev->subdevices + 0;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_msts;
+			s->insn_write = adl_pci8164_insn_write_cmd;
+
+			s = dev->subdevices + 1;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_ssts;
+			s->insn_write = adl_pci8164_insn_write_otp;
+
+			s = dev->subdevices + 2;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf0;
+			s->insn_write = adl_pci8164_insn_write_buf0;
+
+			s = dev->subdevices + 3;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf1;
+			s->insn_write = adl_pci8164_insn_write_buf1;
+
+			printk(KERN_INFO "comedi: attached\n");
+
+			return 1;
+		}
+	}
+
+	printk(KERN_ERR "comedi%d: no supported board found!"
+		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
+	return -EIO;
+}
+
+static int adl_pci8164_detach(struct comedi_device *dev)
+{
+	printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor);
+
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
+
+	return 0;
+}
+
+static struct comedi_driver driver_adl_pci8164 = {
+	.driver_name	= "adl_pci8164",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci8164_attach,
+	.detach		= adl_pci8164_detach,
+};
+
 static int __devinit driver_adl_pci8164_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci8164.driver_name);
+	return comedi_pci_auto_config(dev, &driver_adl_pci8164);
 }
 
 static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev)
@@ -396,10 +346,16 @@ static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);
+
 static struct pci_driver driver_adl_pci8164_pci_driver = {
-	.id_table = adl_pci8164_pci_table,
-	.probe = &driver_adl_pci8164_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci8164_pci_remove)
+	.id_table	= adl_pci8164_pci_table,
+	.probe		= driver_adl_pci8164_pci_probe,
+	.remove		= __devexit_p(driver_adl_pci8164_pci_remove),
 };
 
 static int __init driver_adl_pci8164_init_module(void)
@@ -414,14 +370,13 @@ static int __init driver_adl_pci8164_init_module(void)
 	    (char *)driver_adl_pci8164.driver_name;
 	return pci_register_driver(&driver_adl_pci8164_pci_driver);
 }
+module_init(driver_adl_pci8164_init_module);
 
 static void __exit driver_adl_pci8164_cleanup_module(void)
 {
 	pci_unregister_driver(&driver_adl_pci8164_pci_driver);
 	comedi_driver_unregister(&driver_adl_pci8164);
 }
-
-module_init(driver_adl_pci8164_init_module);
 module_exit(driver_adl_pci8164_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 2a9bd88a4abb..4e4e5fdcda37 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -289,16 +289,6 @@ TODO:
 			PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
 	} while (0)
 
-/*  Function prototypes */
-
-static int pci9111_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci9111_detach(struct comedi_device *dev);
-static void pci9111_ai_munge(struct comedi_device *dev,
-			     struct comedi_subdevice *s, void *data,
-			     unsigned int num_bytes,
-			     unsigned int start_chan_index);
-
 static const struct comedi_lrange pci9111_hr_ai_range = {
 	5,
 	{
@@ -310,14 +300,6 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
 	 }
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
-	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
-
 /*  */
 /*  Board specification structure */
 /*  */
@@ -354,51 +336,6 @@ static const struct pci9111_board pci9111_boards[] = {
 #define pci9111_board_nbr \
 	(sizeof(pci9111_boards)/sizeof(struct pci9111_board))
 
-static struct comedi_driver pci9111_driver = {
-	.driver_name = PCI9111_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci9111_attach,
-	.detach = pci9111_detach,
-};
-
-static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, pci9111_driver.driver_name);
-}
-
-static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver pci9111_driver_pci_driver = {
-	.id_table = pci9111_pci_table,
-	.probe = &pci9111_driver_pci_probe,
-	.remove = __devexit_p(&pci9111_driver_pci_remove)
-};
-
-static int __init pci9111_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&pci9111_driver);
-	if (retval < 0)
-		return retval;
-
-	pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name;
-	return pci_register_driver(&pci9111_driver_pci_driver);
-}
-
-static void __exit pci9111_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&pci9111_driver_pci_driver);
-	comedi_driver_unregister(&pci9111_driver);
-}
-
-module_init(pci9111_driver_init_module);
-module_exit(pci9111_driver_cleanup_module);
-
 /*  Private data structure */
 
 struct pci9111_private_data {
@@ -1470,6 +1407,57 @@ static int pci9111_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver pci9111_driver = {
+	.driver_name	= PCI9111_DRIVER_NAME,
+	.module		= THIS_MODULE,
+	.attach		= pci9111_attach,
+	.detach		= pci9111_detach,
+};
+
+static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &pci9111_driver);
+}
+
+static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
+	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
+
+static struct pci_driver pci9111_driver_pci_driver = {
+	.id_table	= pci9111_pci_table,
+	.probe		= pci9111_driver_pci_probe,
+	.remove		= __devexit_p(pci9111_driver_pci_remove),
+};
+
+static int __init pci9111_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&pci9111_driver);
+	if (retval < 0)
+		return retval;
+
+	pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name;
+	return pci_register_driver(&pci9111_driver_pci_driver);
+}
+module_init(pci9111_driver_init_module);
+
+static void __exit pci9111_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&pci9111_driver_pci_driver);
+	comedi_driver_unregister(&pci9111_driver);
+}
+module_exit(pci9111_driver_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index f17654e44aef..5b845734fe83 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -277,14 +277,12 @@ static const struct boardtype boardtypes[] = {
 	 10000, 40, 512},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
 static struct comedi_driver driver_pci9118 = {
 	.driver_name = "adl_pci9118",
 	.module = THIS_MODULE,
 	.attach = pci9118_attach,
 	.detach = pci9118_detach,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.board_name = &boardtypes[0].name,
 	.offset = sizeof(struct boardtype),
 };
@@ -292,7 +290,7 @@ static struct comedi_driver driver_pci9118 = {
 static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci9118.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pci9118);
 }
 
 static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 5361f318b010..275cb771f776 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -125,24 +125,6 @@ struct adq12b_board {
 	int do_chans;
 };
 
-static const struct adq12b_board adq12b_boards[] = {
-	{
-	 .name = "adq12b",
-	 .ai_se_chans = 16,
-	 .ai_diff_chans = 8,
-	 .ai_bits = 12,
-	 .di_chans = 5,
-	 .do_chans = 8}
-/* potentially, more adq-based deviced will be added */
-/*,
-	.name = "adq12b",
-	.ai_chans = 16,  // this is just for reference, hardcoded again later
-	.ai_bits = 12,
-	.di_chans = 8,
-	.do_chans = 5
-	}*/
-};
-
 #define thisboard ((const struct adq12b_board *)dev->board_ptr)
 
 struct adq12b_private {
@@ -156,41 +138,88 @@ struct adq12b_private {
 #define devpriv ((struct adq12b_private *)dev->private)
 
 /*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
+ * "instructions" read/write data in "one-shot" or "software-triggered"
+ * mode.
  */
-static int adq12b_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int adq12b_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_adq12b = {
-	.driver_name = "adq12b",
-	.module = THIS_MODULE,
-	.attach = adq12b_attach,
-	.detach = adq12b_detach,
-	.board_name = &adq12b_boards[0].name,
-	.offset = sizeof(struct adq12b_board),
-	.num_names = ARRAY_SIZE(adq12b_boards),
-};
 
 static int adq12b_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
+			   unsigned int *data)
+{
+	int n, i;
+	int range, channel;
+	unsigned char hi, lo, status;
+
+	/* change channel and range only if it is different from the previous */
+	range = CR_RANGE(insn->chanspec);
+	channel = CR_CHAN(insn->chanspec);
+	if (channel != devpriv->last_channel || range != devpriv->last_range) {
+		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
+		udelay(50);	/* wait for the mux to settle */
+	}
+
+	/* trigger conversion */
+	status = inb(dev->iobase + ADQ12B_ADLOW);
+
+	/* convert n samples */
+	for (n = 0; n < insn->n; n++) {
+
+		/* wait for end of conversion */
+		i = 0;
+		do {
+			/* udelay(1); */
+			status = inb(dev->iobase + ADQ12B_STINR);
+			status = status & ADQ12B_EOC;
+		} while (status == 0 && ++i < TIMEOUT);
+		/* } while (++i < 10); */
+
+		/* read data */
+		hi = inb(dev->iobase + ADQ12B_ADHIG);
+		lo = inb(dev->iobase + ADQ12B_ADLOW);
+
+		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
+		       channel, range, status,  hi, lo); */
+		data[n] = (hi << 8) | lo;
+
+	}
+
+	/* return the number of samples read/written */
+	return n;
+}
+
 static int adq12b_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+
+	/* only bits 0-4 have information about digital inputs */
+	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
+
+	return 2;
+}
+
 static int adq12b_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	int channel;
+
+	for (channel = 0; channel < 8; channel++)
+		if (((data[0] >> channel) & 0x01) != 0)
+			outb((((data[1] >> channel) & 0x01) << 3) | channel,
+			     dev->iobase + ADQ12B_OUTBR);
+
+	/* store information to retrieve when asked for reading */
+	if (data[0]) {
+		devpriv->digital_state &= ~data[0];
+		devpriv->digital_state |= (data[0] & data[1]);
+	}
+
+	data[1] = devpriv->digital_state;
+
+	return 2;
+}
 
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
 static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
@@ -295,14 +324,6 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
 static int adq12b_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
@@ -315,104 +336,37 @@ static int adq12b_detach(struct comedi_device *dev)
 	return 0;
 }
 
-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
-
-static int adq12b_ai_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data)
-{
-	int n, i;
-	int range, channel;
-	unsigned char hi, lo, status;
-
-	/* change channel and range only if it is different from the previous */
-	range = CR_RANGE(insn->chanspec);
-	channel = CR_CHAN(insn->chanspec);
-	if (channel != devpriv->last_channel || range != devpriv->last_range) {
-		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
-		udelay(50);	/* wait for the mux to settle */
-	}
-
-	/* trigger conversion */
-	status = inb(dev->iobase + ADQ12B_ADLOW);
-
-	/* convert n samples */
-	for (n = 0; n < insn->n; n++) {
-
-		/* wait for end of conversion */
-		i = 0;
-		do {
-			/* udelay(1); */
-			status = inb(dev->iobase + ADQ12B_STINR);
-			status = status & ADQ12B_EOC;
-		} while (status == 0 && ++i < TIMEOUT);
-		/* } while (++i < 10); */
-
-		/* read data */
-		hi = inb(dev->iobase + ADQ12B_ADHIG);
-		lo = inb(dev->iobase + ADQ12B_ADLOW);
-
-		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
-		       channel, range, status,  hi, lo); */
-		data[n] = (hi << 8) | lo;
-
-	}
-
-	/* return the number of samples read/written */
-	return n;
-}
-
-static int adq12b_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-
-	/* only bits 0-4 have information about digital inputs */
-	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
-
-	return 2;
-}
-
-static int adq12b_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	int channel;
-
-	for (channel = 0; channel < 8; channel++)
-		if (((data[0] >> channel) & 0x01) != 0)
-			outb((((data[1] >> channel) & 0x01) << 3) | channel,
-			     dev->iobase + ADQ12B_OUTBR);
-
-	/* store information to retrieve when asked for reading */
-	if (data[0]) {
-		devpriv->digital_state &= ~data[0];
-		devpriv->digital_state |= (data[0] & data[1]);
-	}
-
-	data[1] = devpriv->digital_state;
+static const struct adq12b_board adq12b_boards[] = {
+	{
+		.name		= "adq12b",
+		.ai_se_chans	= 16,
+		.ai_diff_chans	= 8,
+		.ai_bits	= 12,
+		.di_chans	= 5,
+		.do_chans	= 8,
+	},
+};
 
-	return 2;
-}
+static struct comedi_driver driver_adq12b = {
+	.driver_name	= "adq12b",
+	.module		= THIS_MODULE,
+	.attach		= adq12b_attach,
+	.detach		= adq12b_detach,
+	.board_name	= &adq12b_boards[0].name,
+	.offset		= sizeof(struct adq12b_board),
+	.num_names	= ARRAY_SIZE(adq12b_boards),
+};
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
 static int __init driver_adq12b_init_module(void)
 {
 	return comedi_driver_register(&driver_adq12b);
 }
+module_init(driver_adq12b_init_module);
 
 static void __exit driver_adq12b_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_adq12b);
 }
-
-module_init(driver_adq12b_init_module);
 module_exit(driver_adq12b_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 8318c82a555a..9eaae0d18d1f 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -264,14 +264,12 @@ static const struct boardtype boardtypes[] = {
 	{.name = DRV_NAME},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
 static struct comedi_driver driver_pci1710 = {
 	.driver_name = DRV_NAME,
 	.module = THIS_MODULE,
 	.attach = pci1710_attach,
 	.detach = pci1710_detach,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.board_name = &boardtypes[0].name,
 	.offset = sizeof(struct boardtype),
 };
@@ -676,7 +674,9 @@ static void interrupt_pci1710_every_sample(void *d)
 			     s->async->buf_int_count, s->async->buf_int_ptr,
 			     s->async->buf_user_count, s->async->buf_user_ptr);
 			DPRINTK("adv_pci1710 EDBG: EOS2\n");
-			if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) {	/*  all data sampled */
+			if ((!devpriv->neverending_ai) &&
+			    (devpriv->ai_act_scan >= devpriv->ai_scans)) {
+				/*  all data sampled */
 				pci171x_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(dev, s);
@@ -804,8 +804,8 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 		irq);
 	if (!dev->attached)	/*  is device attached? */
 		return IRQ_NONE;	/*  no, exit */
-
-	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))	/*  is this interrupt from our board? */
+	/*  is this interrupt from our board? */
+	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))
 		return IRQ_NONE;	/*  no, exit */
 
 	DPRINTK("adv_pci1710 EDBG: interrupt_service_pci1710() ST: %4x\n",
@@ -814,7 +814,7 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 	if (devpriv->ai_et) {	/*  Switch from initial TRIG_EXT to TRIG_xxx. */
 		devpriv->ai_et = 0;
 		devpriv->CntrlReg &= Control_CNT0;
-		devpriv->CntrlReg |= Control_SW;	/*  set software trigger */
+		devpriv->CntrlReg |= Control_SW; /* set software trigger */
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		devpriv->CntrlReg = devpriv->ai_et_CntrlReg;
 		outb(0, dev->iobase + PCI171x_CLRFIFO);
@@ -865,7 +865,8 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device *dev,
 	devpriv->neverending_ai = 0;
 
 	devpriv->CntrlReg &= Control_CNT0;
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan?            devpriv->ai_eos=1; */
+	/*  don't we want wake up every scan?  devpriv->ai_eos=1; */
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
 		devpriv->ai_eos = 1;
 	} else {
 		devpriv->CntrlReg |= Control_ONEFH;
@@ -982,13 +983,13 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(1, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
+		err);
 		return 1;
 	}
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/* step2: make sure trigger srcs are unique and mutually compatible */
 
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
 		cmd->start_src = TRIG_NOW;
@@ -1015,9 +1016,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(2, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
+		err);
 		return 2;
 	}
 
@@ -1065,9 +1066,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(3, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
+		err);
 		return 3;
 	}
 
@@ -1398,13 +1399,13 @@ static int pci1710_attach(struct comedi_device *dev,
 	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH,
 						PCI_ANY_ID, pcidev))) {
 		if (strcmp(this_board->name, DRV_NAME) == 0) {
-			for (i = 0; i < n_boardtypes; ++i) {
+			for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 				if (pcidev->device == boardtypes[i].device_id) {
 					board_index = i;
 					break;
 				}
 			}
-			if (i == n_boardtypes)
+			if (i == ARRAY_SIZE(boardtypes))
 				continue;
 		} else {
 			if (pcidev->device != boardtypes[board_index].device_id)
@@ -1612,7 +1613,7 @@ static int pci1710_detach(struct comedi_device *dev)
 static int __devinit driver_pci1710_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1710.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pci1710);
 }
 
 static void __devexit driver_pci1710_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 29455a8e88b4..54a33042354b 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -150,36 +150,6 @@ static const struct pci1723_board boardtypes[] = {
 	 },
 };
 
-/*
- * This is used by modprobe to translate PCI IDs to drivers.
- * Should only be used for PCI and ISA-PnP devices
- */
-static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci1723_pci_table);
-
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pci1723_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci1723_detach(struct comedi_device *dev);
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board))
-
-static struct comedi_driver driver_pci1723 = {
-	.driver_name = "adv_pci1723",
-	.module = THIS_MODULE,
-	.attach = pci1723_attach,
-	.detach = pci1723_detach,
-};
-
 /* This structure is for data unique to this hardware driver. */
 struct pci1723_private {
 	int valid;		/* card is usable; */
@@ -319,10 +289,6 @@ static int pci1723_dio_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a pci1723 board.
- */
 static int pci1723_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -465,14 +431,6 @@ static int pci1723_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
 static int pci1723_detach(struct comedi_device *dev)
 {
 	printk(KERN_ERR "comedi%d: pci1723: remove\n", dev->minor);
@@ -491,14 +449,17 @@ static int pci1723_detach(struct comedi_device *dev)
 	return 0;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
+static struct comedi_driver driver_pci1723 = {
+	.driver_name	= "adv_pci1723",
+	.module		= THIS_MODULE,
+	.attach		= pci1723_attach,
+	.detach		= pci1723_detach,
+};
+
 static int __devinit driver_pci1723_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1723.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pci1723);
 }
 
 static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev)
@@ -506,10 +467,16 @@ static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, pci1723_pci_table);
+
 static struct pci_driver driver_pci1723_pci_driver = {
-	.id_table = pci1723_pci_table,
-	.probe = &driver_pci1723_pci_probe,
-	.remove = __devexit_p(&driver_pci1723_pci_remove)
+	.id_table	= pci1723_pci_table,
+	.probe		= driver_pci1723_pci_probe,
+	.remove		= __devexit_p(driver_pci1723_pci_remove),
 };
 
 static int __init driver_pci1723_init_module(void)
@@ -523,14 +490,13 @@ static int __init driver_pci1723_init_module(void)
 	driver_pci1723_pci_driver.name = (char *)driver_pci1723.driver_name;
 	return pci_register_driver(&driver_pci1723_pci_driver);
 }
+module_init(driver_pci1723_init_module);
 
 static void __exit driver_pci1723_cleanup_module(void)
 {
 	pci_unregister_driver(&driver_pci1723_pci_driver);
 	comedi_driver_unregister(&driver_pci1723);
 }
-
-module_init(driver_pci1723_init_module);
 module_exit(driver_pci1723_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 7af068f4a749..7d920fe636c6 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -406,8 +406,6 @@ static const struct dio_boardtype boardtypes[] = {
 	 IO_16b}
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dio_boardtype))
-
 static struct comedi_driver driver_pci_dio = {
 	.driver_name = "adv_pci_dio",
 	.module = THIS_MODULE,
@@ -1134,7 +1132,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 
 	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
-		for (i = 0; i < n_boardtypes; ++i) {
+		for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 			if (boardtypes[i].vendor_id != pcidev->vendor)
 				continue;
 			if (boardtypes[i].device_id != pcidev->device)
@@ -1319,7 +1317,7 @@ static int pci_dio_detach(struct comedi_device *dev)
 static int __devinit driver_pci_dio_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci_dio.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pci_dio);
 }
 
 static void __devexit driver_pci_dio_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index 160b0a0f4f1e..763461a569aa 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -67,30 +67,41 @@ struct aio_iiro_16_private {
 
 #define	devpriv	((struct aio_iiro_16_private *) dev->private)
 
-static int aio_iiro_16_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
+static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
+					   struct comedi_subdevice *s,
+					   struct comedi_insn *insn,
+					   unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int aio_iiro_16_detach(struct comedi_device *dev);
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= data[0] & data[1];
+		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
+		outb((s->state >> 8) & 0xff,
+		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
+	}
 
-static struct comedi_driver driver_aio_iiro_16 = {
-	.driver_name = "aio_iiro_16",
-	.module = THIS_MODULE,
-	.attach = aio_iiro_16_attach,
-	.detach = aio_iiro_16_detach,
-	.board_name = &aio_iiro_16_boards[0].name,
-	.offset = sizeof(struct aio_iiro_16_board),
-	.num_names = ARRAY_SIZE(aio_iiro_16_boards),
-};
+	data[1] = s->state;
+
+	return 2;
+}
 
 static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn,
-					  unsigned int *data);
+					  unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data);
+	data[1] = 0;
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
+
+	return 2;
+}
 
 static int aio_iiro_16_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@@ -148,53 +159,26 @@ static int aio_iiro_16_detach(struct comedi_device *dev)
 	return 0;
 }
 
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
-		outb((s->state >> 8) & 0xff,
-		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
-	}
-
-	data[1] = s->state;
-
-	return 2;
-}
-
-static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
-					  struct comedi_subdevice *s,
-					  struct comedi_insn *insn,
-					  unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = 0;
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
-
-	return 2;
-}
+static struct comedi_driver driver_aio_iiro_16 = {
+	.driver_name	= "aio_iiro_16",
+	.module		= THIS_MODULE,
+	.attach		= aio_iiro_16_attach,
+	.detach		= aio_iiro_16_detach,
+	.board_name	= &aio_iiro_16_boards[0].name,
+	.offset		= sizeof(struct aio_iiro_16_board),
+	.num_names	= ARRAY_SIZE(aio_iiro_16_boards),
+};
 
 static int __init driver_aio_iiro_16_init_module(void)
 {
 	return comedi_driver_register(&driver_aio_iiro_16);
 }
+module_init(driver_aio_iiro_16_init_module);
 
 static void __exit driver_aio_iiro_16_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_aio_iiro_16);
 }
-
-module_init(driver_aio_iiro_16_init_module);
 module_exit(driver_aio_iiro_16_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 566cc4411452..cbfa0cd6a1d5 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -217,6 +217,14 @@ order they appear in the channel list.
 
 #define DIO200_DRIVER_NAME	"amplc_dio200"
 
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_PCI
+#endif
+
 /* PCI IDs */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
@@ -274,10 +282,14 @@ enum dio200_model {
 };
 
 enum dio200_layout {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc212_layout,
 	pc214_layout,
+#endif
 	pc215_layout,
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc218_layout,
+#endif
 	pc272_layout
 };
 
@@ -290,6 +302,7 @@ struct dio200_board {
 };
 
 static const struct dio200_board dio200_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	{
 	 .name = "pc212e",
 	 .bustype = isa_bustype,
@@ -308,15 +321,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc215e_model,
 	 .layout = pc215_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "pci215",
-	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
-	 .bustype = pci_bustype,
-	 .model = pci215_model,
-	 .layout = pc215_layout,
-	 },
-#endif
 	{
 	 .name = "pc218e",
 	 .bustype = isa_bustype,
@@ -329,7 +333,15 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc272e_model,
 	 .layout = pc272_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	{
+	 .name = "pci215",
+	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
+	 .bustype = pci_bustype,
+	 .model = pci215_model,
+	 .layout = pc215_layout,
+	 },
 	{
 	 .name = "pci272",
 	 .devid = PCI_DEVICE_ID_AMPLICON_PCI272,
@@ -337,8 +349,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pci272_model,
 	 .layout = pc272_layout,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = DIO200_DRIVER_NAME,
 	 .devid = PCI_DEVICE_ID_INVALID,
@@ -367,6 +377,7 @@ struct dio200_layout_struct {
 };
 
 static const struct dio200_layout_struct dio200_layouts[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc212_layout] = {
 			  .n_subdevs = 6,
 			  .sdtype = {sd_8255, sd_8254, sd_8254, sd_8254,
@@ -385,6 +396,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 0,
 			  .has_clk_gat_sce = 0,
 			  },
+#endif
 	[pc215_layout] = {
 			  .n_subdevs = 5,
 			  .sdtype = {sd_8255, sd_8255, sd_8254,
@@ -394,6 +406,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc218_layout] = {
 			  .n_subdevs = 7,
 			  .sdtype = {sd_8254, sd_8254, sd_8255, sd_8254,
@@ -405,6 +418,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#endif
 	[pc272_layout] = {
 			  .n_subdevs = 4,
 			  .sdtype = {sd_8255, sd_8255, sd_8255,
@@ -419,7 +433,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
  * PCI driver table.
  */
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
@@ -427,7 +441,7 @@ static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 };
 
 MODULE_DEVICE_TABLE(pci, dio200_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_DIO200_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -441,7 +455,7 @@ MODULE_DEVICE_TABLE(pci, dio200_pci_table);
    feel free to suggest moving the variable to the struct comedi_device struct.
  */
 struct dio200_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev;	/* PCI device */
 #endif
 	int intr_sd;
@@ -490,12 +504,12 @@ static struct comedi_driver driver_amplc_dio200 = {
 	.num_names = ARRAY_SIZE(dio200_boards),
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_dio200.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_dio200);
 }
 
 static void __devexit driver_amplc_dio200_pci_remove(struct pci_dev *dev)
@@ -549,7 +563,7 @@ module_exit(driver_amplc_dio200_cleanup_module);
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int
 dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 		struct pci_dev **pci_dev_p)
@@ -611,6 +625,7 @@ dio200_find_pci(struct comedi_device *dev, int bus, int slot,
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 static int
 dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 {
@@ -621,6 +636,7 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 	}
 	return 0;
 }
+#endif
 
 /*
  * 'insn_bits' function for an 'INTERRUPT' subdevice.
@@ -1332,7 +1348,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -1354,12 +1370,14 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -1382,7 +1400,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->intr_sd = -1;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
 		if (ret < 0) {
@@ -1396,9 +1414,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 		ret = dio200_request_region(dev->minor, iobase, DIO200_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -1474,12 +1494,19 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	case pci_bustype:
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@@ -1529,7 +1556,7 @@ static int dio200_detach(struct comedi_device *dev)
 		}
 	}
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -1537,8 +1564,10 @@ static int dio200_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, DIO200_IO_SIZE);
+#endif
 		}
 	}
 	if (dev->board_name)
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 7972cadd403e..821cf1dda578 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -63,6 +63,14 @@ unused.
 
 #define PC236_DRIVER_NAME	"amplc_pc236"
 
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_PCI
+#endif
+
 /* PCI236 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
@@ -106,13 +114,15 @@ struct pc236_board {
 	enum pc236_model model;
 };
 static const struct pc236_board pc236_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	{
 	 .name = "pc36at",
 	 .fancy_name = "PC36AT",
 	 .bustype = isa_bustype,
 	 .model = pc36at_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	{
 	 .name = "pci236",
 	 .fancy_name = "PCI236",
@@ -120,8 +130,6 @@ static const struct pc236_board pc236_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci236_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC236_DRIVER_NAME,
 	 .fancy_name = PC236_DRIVER_NAME,
@@ -132,14 +140,14 @@ static const struct pc236_board pc236_boards[] = {
 #endif
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
 	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc236_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC236_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -151,7 +159,7 @@ MODULE_DEVICE_TABLE(pci, pc236_pci_table);
    feel free to suggest moving the variable to the struct comedi_device struct.
  */
 struct pc236_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	/* PCI device */
 	struct pci_dev *pci_dev;
 	unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
@@ -179,12 +187,12 @@ static struct comedi_driver driver_amplc_pc236 = {
 	.num_names = ARRAY_SIZE(pc236_boards),
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc236.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc236);
 }
 
 static void __devexit driver_amplc_pc236_pci_remove(struct pci_dev *dev)
@@ -234,8 +242,10 @@ module_init(driver_amplc_pc236_init_module);
 module_exit(driver_amplc_pc236_cleanup_module);
 #endif
 
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static void pc236_intr_disable(struct comedi_device *dev);
 static void pc236_intr_enable(struct comedi_device *dev);
 static int pc236_intr_check(struct comedi_device *dev);
@@ -255,7 +265,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d);
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int
 pc236_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@@ -324,7 +334,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -345,12 +355,14 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -361,7 +373,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@@ -376,7 +388,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (pci_dev) {
 
 		ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
@@ -392,9 +404,11 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 		ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -439,12 +453,19 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+	case pci_bustype:
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@@ -476,7 +497,7 @@ static int pc236_detach(struct comedi_device *dev)
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -484,8 +505,10 @@ static int pc236_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC236_IO_SIZE);
+#endif
 		}
 	}
 	if (dev->board_name) {
@@ -499,6 +522,7 @@ static int pc236_detach(struct comedi_device *dev)
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@@ -509,6 +533,7 @@ static int pc236_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif
 
 /*
  * This function is called to mark the interrupt as disabled (no command
@@ -521,7 +546,7 @@ static void pc236_intr_disable(struct comedi_device *dev)
 
 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@@ -539,7 +564,7 @@ static void pc236_intr_enable(struct comedi_device *dev)
 
 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@@ -561,7 +586,7 @@ static int pc236_intr_check(struct comedi_device *dev)
 	spin_lock_irqsave(&dev->spinlock, flags);
 	if (devpriv->enable_irq) {
 		retval = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->lcr_iobase) {
 			if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR)
 			     & PLX9052_INTCSR_LI1STAT_MASK)
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 191ac0d23ce7..58ef6e4cc110 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -50,6 +50,14 @@ The state of the outputs can be read.
 
 #define PC263_DRIVER_NAME	"amplc_pc263"
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_PCI
+#endif
+
 /* PCI263 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c
@@ -73,13 +81,15 @@ struct pc263_board {
 	enum pc263_model model;
 };
 static const struct pc263_board pc263_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	{
 	 .name = "pc263",
 	 .fancy_name = "PC263",
 	 .bustype = isa_bustype,
 	 .model = pc263_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	{
 	 .name = "pci263",
 	 .fancy_name = "PCI263",
@@ -87,8 +97,6 @@ static const struct pc263_board pc263_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci263_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC263_DRIVER_NAME,
 	 .fancy_name = PC263_DRIVER_NAME,
@@ -99,14 +107,14 @@ static const struct pc263_board pc263_boards[] = {
 #endif
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) },
 	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc263_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -117,14 +125,14 @@ MODULE_DEVICE_TABLE(pci, pc263_pci_table);
    several hardware drivers keep similar information in this structure,
    feel free to suggest moving the variable to the struct comedi_device struct.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 struct pc263_private {
 	/* PCI device. */
 	struct pci_dev *pci_dev;
 };
 
 #define devpriv ((struct pc263_private *)dev->private)
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * The struct comedi_driver structure tells the Comedi core module
@@ -144,8 +152,10 @@ static struct comedi_driver driver_amplc_pc263 = {
 	.num_names = ARRAY_SIZE(pc263_boards),
 };
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static int pc263_dio_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@@ -157,7 +167,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int
 pc263_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@@ -225,7 +235,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -237,7 +247,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	ret = alloc_private(dev, sizeof(struct pc263_private));
 	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
@@ -247,10 +257,12 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -260,7 +272,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@@ -275,7 +287,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
 		if (ret < 0) {
@@ -289,9 +301,11 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 		ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -322,12 +336,18 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s->state = s->state | (inb(dev->iobase) << 8);
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 
 	printk("attached\n");
@@ -348,10 +368,11 @@ static int pc263_detach(struct comedi_device *dev)
 	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
 	       PC263_DRIVER_NAME);
 
-#ifdef CONFIG_COMEDI_PCI
-	if (devpriv) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
+	if (devpriv)
 #endif
-#ifdef CONFIG_COMEDI_PCI
+	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -359,8 +380,10 @@ static int pc263_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC263_IO_SIZE);
+#endif
 		}
 	}
 	if (dev->board_name) {
@@ -374,6 +397,7 @@ static int pc263_detach(struct comedi_device *dev)
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@@ -384,6 +408,7 @@ static int pc263_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -429,12 +454,12 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc263.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc263);
 }
 
 static void __devexit driver_amplc_pc263_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index b278917cec25..fe65338dd323 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -430,11 +430,14 @@ struct pci224_private {
 static int pci224_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
 static int pci224_detach(struct comedi_device *dev);
+static int pci224_attach_pci(struct comedi_device *dev,
+			     struct pci_dev *pci_dev);
 static struct comedi_driver driver_amplc_pci224 = {
 	.driver_name = DRIVER_NAME,
 	.module = THIS_MODULE,
 	.attach = pci224_attach,
 	.detach = pci224_detach,
+	.attach_pci = pci224_attach_pci,
 	.board_name = &pci224_boards[0].name,
 	.offset = sizeof(struct pci224_board),
 	.num_names = ARRAY_SIZE(pci224_boards),
@@ -444,7 +447,7 @@ static int __devinit driver_amplc_pci224_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pci224.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pci224);
 }
 
 static void __devexit driver_amplc_pci224_pci_remove(struct pci_dev *dev)
@@ -1312,6 +1315,20 @@ static irqreturn_t pci224_interrupt(int irq, void *d)
 }
 
 /*
+ * This function looks for a board matching the supplied PCI device.
+ */
+static const struct pci224_board
+*pci224_find_pci_board(struct pci_dev *pci_dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pci224_boards); i++)
+		if (pci_dev->device == pci224_boards[i].devid)
+			return &pci224_boards[i];
+	return NULL;
+}
+
+/*
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
@@ -1336,17 +1353,12 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot,
 		}
 		if (thisboard->model == any_model) {
 			/* Match any supported model. */
-			int i;
-
-			for (i = 0; i < ARRAY_SIZE(pci224_boards); i++) {
-				if (pci_dev->device == pci224_boards[i].devid) {
-					/* Change board_ptr to matched board. */
-					dev->board_ptr = &pci224_boards[i];
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(pci224_boards))
+			const struct pci224_board *board_ptr;
+			board_ptr = pci224_find_pci_board(pci_dev);
+			if (board_ptr == NULL)
 				continue;
+			/* Change board_ptr to matched board. */
+			dev->board_ptr = board_ptr;
 		} else {
 			/* Match specific model name. */
 			if (thisboard->devid != pci_dev->device)
@@ -1370,35 +1382,16 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot,
 }
 
 /*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
+ * Common part of attach and attach_pci.
  */
-static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int pci224_attach_common(struct comedi_device *dev,
+				struct pci_dev *pci_dev, int *options)
 {
 	struct comedi_subdevice *s;
-	struct pci_dev *pci_dev;
 	unsigned int irq;
-	int bus = 0, slot = 0;
 	unsigned n;
 	int ret;
 
-	printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME);
-
-	bus = it->options[0];
-	slot = it->options[1];
-	ret = alloc_private(dev, sizeof(struct pci224_private));
-	if (ret < 0) {
-		printk(KERN_ERR "comedi%d: error! out of memory!\n",
-		       dev->minor);
-		return ret;
-	}
-
-	ret = pci224_find_pci(dev, bus, slot, &pci_dev);
-	if (ret < 0)
-		return ret;
-
 	devpriv->pci_dev = pci_dev;
 	ret = comedi_pci_enable(pci_dev, DRIVER_NAME);
 	if (ret < 0) {
@@ -1483,24 +1476,26 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		if (!s->range_table_list)
 			return -ENOMEM;
 
-		for (n = 2; n < 3 + s->n_chan; n++) {
-			if (it->options[n] < 0 || it->options[n] > 1) {
-				printk(KERN_WARNING "comedi%d: %s: warning! "
-				       "bad options[%u]=%d\n",
-				       dev->minor, DRIVER_NAME, n,
-				       it->options[n]);
+		if (options) {
+			for (n = 2; n < 3 + s->n_chan; n++) {
+				if (options[n] < 0 || options[n] > 1) {
+					printk(KERN_WARNING
+					       "comedi%d: %s: warning! bad options[%u]=%d\n",
+					       dev->minor, DRIVER_NAME, n,
+					       options[n]);
+				}
 			}
 		}
 		for (n = 0; n < s->n_chan; n++) {
-			if (n < COMEDI_NDEVCONFOPTS - 3 &&
-			    it->options[3 + n] == 1) {
-				if (it->options[2] == 1)
+			if (n < COMEDI_NDEVCONFOPTS - 3 && options &&
+			    options[3 + n] == 1) {
+				if (options[2] == 1)
 					range_table_list[n] = &range_pci234_ext;
 				else
 					range_table_list[n] = &range_bipolar5;
 
 			} else {
-				if (it->options[2] == 1) {
+				if (options && options[2] == 1) {
 					range_table_list[n] =
 					    &range_pci234_ext2;
 				} else {
@@ -1511,14 +1506,14 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		devpriv->hwrange = hwrange_pci234;
 	} else {
 		/* PCI224 range options. */
-		if (it->options[2] == 1) {
+		if (options && options[2] == 1) {
 			s->range_table = &range_pci224_external;
 			devpriv->hwrange = hwrange_pci224_external;
 		} else {
-			if (it->options[2] != 0) {
+			if (options && options[2] != 0) {
 				printk(KERN_WARNING "comedi%d: %s: warning! "
 				       "bad options[2]=%d\n",
-				       dev->minor, DRIVER_NAME, it->options[2]);
+				       dev->minor, DRIVER_NAME, options[2]);
 			}
 			s->range_table = &range_pci224_internal;
 			devpriv->hwrange = hwrange_pci224_internal;
@@ -1553,6 +1548,66 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 }
 
 /*
+ * _attach is called by the Comedi core to configure the driver
+ * for a particular board.  If you specified a board_name array
+ * in the driver structure, dev->board_ptr contains that
+ * address.
+ */
+static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct pci_dev *pci_dev;
+	int bus, slot;
+	int ret;
+
+	printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME);
+
+	bus = it->options[0];
+	slot = it->options[1];
+	ret = alloc_private(dev, sizeof(struct pci224_private));
+	if (ret < 0) {
+		printk(KERN_ERR "comedi%d: error! out of memory!\n",
+		       dev->minor);
+		return ret;
+	}
+
+	ret = pci224_find_pci(dev, bus, slot, &pci_dev);
+	if (ret < 0)
+		return ret;
+
+	return pci224_attach_common(dev, pci_dev, it->options);
+}
+
+/*
+ * _attach_pci is called by comedi_pci_auto_config() in the Comedi core
+ * to configure a comedi device for a probed PCI device.
+ * dev->board_ptr is NULL on entry.
+ */
+static int
+pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev)
+{
+	int ret;
+
+	printk(KERN_DEBUG "comedi%d: %s: attach_pci %s\n", dev->minor,
+	       DRIVER_NAME, pci_name(pci_dev));
+
+	ret = alloc_private(dev, sizeof(struct pci224_private));
+	if (ret < 0) {
+		printk(KERN_ERR "comedi%d: error! out of memory!\n",
+		       dev->minor);
+		return ret;
+	}
+
+	dev->board_ptr = pci224_find_pci_board(pci_dev);
+	if (dev->board_ptr == NULL) {
+		printk(KERN_ERR
+		       "comedi%d: %s: BUG! cannot determine board type!\n",
+		       dev->minor, DRIVER_NAME);
+		return -EINVAL;
+	}
+	return pci224_attach_common(dev, pci_dev, NULL);
+}
+
+/*
  * _detach is called to deconfigure a device.  It should deallocate
  * resources.
  * This function is also called when _attach() fails, so it should be
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 538979551c8e..1d2eb47d32b4 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -618,7 +618,7 @@ static int __devinit driver_amplc_pci230_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pci230.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pci230);
 }
 
 static void __devexit driver_amplc_pci230_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index 11cdaf2a5aa5..5f7535150397 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -97,16 +97,6 @@ union encvaluetype {
 
 #define C6XDIGIO_TIME_OUT 20
 
-static int c6xdigio_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int c6xdigio_detach(struct comedi_device *dev);
-struct comedi_driver driver_c6xdigio = {
-	.driver_name = "c6xdigio",
-	.module = THIS_MODULE,
-	.attach = c6xdigio_attach,
-	.detach = c6xdigio_detach,
-};
-
 static void C6X_pwmInit(unsigned long baseAddr)
 {
 	int timeout = 0;
@@ -518,17 +508,23 @@ static int c6xdigio_detach(struct comedi_device *dev)
 	return 0;
 }
 
+struct comedi_driver driver_c6xdigio = {
+	.driver_name	= "c6xdigio",
+	.module		= THIS_MODULE,
+	.attach		= c6xdigio_attach,
+	.detach		= c6xdigio_detach,
+};
+
 static int __init driver_c6xdigio_init_module(void)
 {
 	return comedi_driver_register(&driver_c6xdigio);
 }
+module_init(driver_c6xdigio_init_module);
 
 static void __exit driver_c6xdigio_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_c6xdigio);
 }
-
-module_init(driver_c6xdigio_init_module);
 module_exit(driver_c6xdigio_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 7e4ffcfdac62..f1ad286a0306 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -1925,7 +1925,7 @@ static int nvram_read(struct comedi_device *dev, unsigned int address,
 static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
 						const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
+	return comedi_pci_auto_config(dev, &driver_cb_pcidas);
 }
 
 static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 915157d47805..ff79fd4259f0 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1219,7 +1219,7 @@ static void load_ao_dma(struct comedi_device *dev,
 static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
 						const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
+	return comedi_pci_auto_config(dev, &driver_cb_pcidas);
 }
 
 static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index abba220a767f..38efb4a07168 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -51,9 +51,12 @@ Please report success/failure with other different cards to
 #include "comedi_pci.h"
 #include "8255.h"
 
-#define PCI_VENDOR_ID_CB	0x1307	/*  PCI vendor number of ComputerBoards */
+
+/* PCI vendor number of ComputerBoards */
+#define PCI_VENDOR_ID_CB        0x1307
 #define EEPROM_SIZE	128	/*  number of entries in eeprom */
-#define MAX_AO_CHANNELS 8	/*  maximum number of ao channels for supported boards */
+/* maximum number of ao channels for supported boards */
+#define MAX_AO_CHANNELS 8
 
 /* PCI-DDA base addresses */
 #define DIGITALIO_BADRINDEX	2
@@ -94,20 +97,26 @@ Please report success/failure with other different cards to
 
 #define DACALIBRATION1	4	/*  D/A CALIBRATION REGISTER 1 */
 /* write bits */
-#define	SERIAL_IN_BIT	0x1	/*  serial data input for eeprom, caldacs, reference dac */
+/* serial data input for eeprom, caldacs, reference dac */
+#define SERIAL_IN_BIT   0x1
 #define	CAL_CHANNEL_MASK	(0x7 << 1)
 #define	CAL_CHANNEL_BITS(channel)	(((channel) << 1) & CAL_CHANNEL_MASK)
 /* read bits */
 #define	CAL_COUNTER_MASK	0x1f
-#define	CAL_COUNTER_OVERFLOW_BIT	0x20	/*  calibration counter overflow status bit */
-#define	AO_BELOW_REF_BIT	0x40	/*  analog output is less than reference dac voltage */
+/* calibration counter overflow status bit */
+#define CAL_COUNTER_OVERFLOW_BIT        0x20
+/* analog output is less than reference dac voltage */
+#define AO_BELOW_REF_BIT        0x40
 #define	SERIAL_OUT_BIT	0x80	/*  serial data out, for reading from eeprom */
 
 #define DACALIBRATION2	6	/*  D/A CALIBRATION REGISTER 2 */
 #define	SELECT_EEPROM_BIT	0x1	/*  send serial data in to eeprom */
-#define	DESELECT_REF_DAC_BIT	0x2	/*  don't send serial data to MAX542 reference dac */
-#define	DESELECT_CALDAC_BIT(n)	(0x4 << (n))	/*  don't send serial data to caldac n */
-#define	DUMMY_BIT	0x40	/*  manual says to set this bit with no explanation */
+/* don't send serial data to MAX542 reference dac */
+#define DESELECT_REF_DAC_BIT    0x2
+/* don't send serial data to caldac n */
+#define DESELECT_CALDAC_BIT(n)  (0x4 << (n))
+/* manual says to set this bit with no explanation */
+#define DUMMY_BIT       0x40
 
 #define DADATA	8		/*  FIRST D/A DATA REGISTER (0) */
 
@@ -212,9 +221,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table);
  */
 #define thisboard ((const struct cb_pcidda_board *)dev->board_ptr)
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
+/*
+ * this structure is for data unique to this hardware driver.  If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
 struct cb_pcidda_private {
 	int data;
 
@@ -227,8 +239,10 @@ struct cb_pcidda_private {
 	/* unsigned long control_status; */
 	/* unsigned long adc_fifo; */
 
-	unsigned int dac_cal1_bits;	/*  bits last written to da calibration register 1 */
-	unsigned int ao_range[MAX_AO_CHANNELS];	/*  current range settings for output channels */
+	/* bits last written to da calibration register 1 */
+	unsigned int dac_cal1_bits;
+	/* current range settings for output channels */
+	unsigned int ao_range[MAX_AO_CHANNELS];
 	u16 eeprom_data[EEPROM_SIZE];	/*  software copy of board's eeprom */
 };
 
@@ -377,7 +391,8 @@ found:
 	dev_dbg(dev->hw_dev, "eeprom:\n");
 	for (index = 0; index < EEPROM_SIZE; index++) {
 		devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index);
-		dev_dbg(dev->hw_dev, "%i:0x%x\n", index, devpriv->eeprom_data[index]);
+		dev_dbg(dev->hw_dev, "%i:0x%x\n", index,
+			devpriv->eeprom_data[index]);
 	}
 
 	/*  set calibrations dacs */
@@ -484,7 +499,10 @@ static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources are unique and mutually
+	 * compatible
+	 */
 
 	/* note that mutual compatibility is not an issue here */
 	if (cmd->scan_begin_src != TRIG_TIMER
@@ -696,8 +714,10 @@ static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev,
 	unsigned int i;
 	unsigned int cal2_bits;
 	unsigned int value;
-	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
-	const int read_instruction = 0x6;	/*  bits to send to tell eeprom we want to read */
+	/* one caldac for every two dac channels */
+	const int max_num_caldacs = 4;
+	/* bits to send to tell eeprom we want to read */
+	const int read_instruction = 0x6;
 	const int instruction_length = 3;
 	const int address_length = 8;
 
@@ -729,9 +749,11 @@ static void cb_pcidda_write_caldac(struct comedi_device *dev,
 {
 	unsigned int cal2_bits;
 	unsigned int i;
-	const int num_channel_bits = 3;	/*  caldacs use 3 bit channel specification */
+	/* caldacs use 3 bit channel specification */
+	const int num_channel_bits = 3;
 	const int num_caldac_bits = 8;	/*  8 bit calibration dacs */
-	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
+	/* one caldac for every two dac channels */
+	const int max_num_caldacs = 4;
 
 	/* write 3 bit channel */
 	cb_pcidda_serial_out(dev, channel, num_channel_bits);
@@ -790,14 +812,20 @@ static unsigned int offset_eeprom_address(unsigned int ao_channel,
 	return 0x7 + 2 * range + 12 * ao_channel;
 }
 
-/* returns eeprom address that provides gain calibration for given ao channel and range */
+/*
+ * returns eeprom address that provides gain calibration for given ao
+ * channel and range
+ */
 static unsigned int gain_eeprom_address(unsigned int ao_channel,
 					unsigned int range)
 {
 	return 0x8 + 2 * range + 12 * ao_channel;
 }
 
-/* returns upper byte of eeprom entry, which gives the coarse adjustment values */
+/*
+ * returns upper byte of eeprom entry, which gives the coarse adjustment
+ * values
+ */
 static unsigned int eeprom_coarse_byte(unsigned int word)
 {
 	return (word >> 8) & 0xff;
@@ -815,7 +843,7 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 {
 	unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain;
 
-	/*  remember range so we can tell when we need to readjust calibration */
+	/* remember range so we can tell when we need to readjust calibration */
 	devpriv->ao_range[channel] = range;
 
 	/*  get values from eeprom data */
@@ -850,7 +878,7 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 static int __devinit driver_cb_pcidda_pci_probe(struct pci_dev *dev,
 						const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidda.driver_name);
+	return comedi_pci_auto_config(dev, &driver_cb_pcidda);
 }
 
 static void __devexit driver_cb_pcidda_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 8f3215239a15..3758af7fd80f 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -293,7 +293,7 @@ static int pcidio_detach(struct comedi_device *dev)
 static int __devinit driver_cb_pcidio_pci_probe(struct pci_dev *dev,
 						const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidio.driver_name);
+	return comedi_pci_auto_config(dev, &driver_cb_pcidio);
 }
 
 static void __devexit driver_cb_pcidio_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 8ba694263bd3..842d99db00d6 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -139,9 +139,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
  */
 #define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr)
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
+/*
+ * this structure is for data unique to this hardware driver.  If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
 struct cb_pcimdas_private {
 	int data;
 
@@ -317,7 +320,8 @@ found:
 	s->subdev_flags = SDF_WRITABLE;
 	s->n_chan = thisboard->ao_nchan;
 	s->maxdata = 1 << thisboard->ao_bits;
-	s->range_table = &range_unknown;	/* ranges are hardware settable, but not software readable. */
+	/* ranges are hardware settable, but not software readable. */
+	s->range_table = &range_unknown;
 	s->insn_write = &cb_pcimdas_ao_winsn;
 	s->insn_read = &cb_pcimdas_ao_rinsn;
 
@@ -402,7 +406,10 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
 	outb(0x01, devpriv->BADR3 + 6);	/* set bursting off, conversions on */
 	outb(0x00, devpriv->BADR3 + 7);	/* set range to 10V. UP/BP is controlled by a switch on the board */
 
-	/*  write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */
+	/*
+	 * write channel limits to multiplexer, set Low (bits 0-3) and
+	 * High (bits 4-7) channels to chan.
+	 */
 	chanlims = chan | (chan << 4);
 	outb(chanlims, devpriv->BADR3 + 0);
 
@@ -487,7 +494,7 @@ static int __devinit driver_cb_pcimdas_pci_probe(struct pci_dev *dev,
 						 const struct pci_device_id
 						 *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcimdas.driver_name);
+	return comedi_pci_auto_config(dev, &driver_cb_pcimdas);
 }
 
 static void __devexit driver_cb_pcimdas_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index 40bddfa22220..8d1081e9a798 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -201,7 +201,7 @@ static int __devinit cb_pcimdda_driver_pci_probe(struct pci_dev *dev,
 						 const struct pci_device_id
 						 *ent)
 {
-	return comedi_pci_auto_config(dev, cb_pcimdda_driver.driver_name);
+	return comedi_pci_auto_config(dev, &cb_pcimdda_driver);
 }
 
 static void __devexit cb_pcimdda_driver_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index e3659bd6e85e..621e8afb6d47 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -231,7 +231,7 @@ static int contec_di_insn_bits(struct comedi_device *dev,
 static int __devinit driver_contec_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_contec.driver_name);
+	return comedi_pci_auto_config(dev, &driver_contec);
 }
 
 static void __devexit driver_contec_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index e61c6a8f2857..480f418b28c1 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -321,7 +321,6 @@ static const struct daq200_boardtype boardtypes[] = {
 	{"ids4", DAQBOARD2000_SUBSYSTEM_IDS4},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct daq200_boardtype))
 #define this_board ((const struct daq200_boardtype *)dev->board_ptr)
 
 static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = {
@@ -412,9 +411,12 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
 	    DAQBOARD2000_AcqResetScanListFifo |
 	    DAQBOARD2000_AcqResetResultsFifo | DAQBOARD2000_AcqResetConfigPipe;
 
-	/* If pacer clock is not set to some high value (> 10 us), we
-	   risk multiple samples to be put into the result FIFO. */
-	fpga->acqPacerClockDivLow = 1000000;	/* 1 second, should be long enough */
+	/*
+	 * If pacer clock is not set to some high value (> 10 us), we
+	 * risk multiple samples to be put into the result FIFO.
+	 */
+	/* 1 second, should be long enough */
+	fpga->acqPacerClockDivLow = 1000000;
 	fpga->acqPacerClockDivHigh = 0;
 
 	gain = CR_RANGE(insn->chanspec);
@@ -761,7 +763,7 @@ static int daqboard2000_attach(struct comedi_device *dev,
 		devpriv->pci_dev = card;
 		id = ((u32) card->
 		      subsystem_device << 16) | card->subsystem_vendor;
-		for (i = 0; i < n_boardtypes; i++) {
+		for (i = 0; i < ARRAY_SIZE(boardtypes); i++) {
 			if (boardtypes[i].id == id) {
 				dev_dbg(dev->hw_dev, "%s\n",
 					boardtypes[i].name);
@@ -878,7 +880,7 @@ static int __devinit driver_daqboard2000_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_daqboard2000.driver_name);
+	return comedi_pci_auto_config(dev, &driver_daqboard2000);
 }
 
 static void __devexit driver_daqboard2000_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index c2dd0ed36a73..575c5cc31176 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -61,6 +61,20 @@
 
 #define DRV_NAME "das08"
 
+#ifdef CONFIG_COMEDI_DAS08_ISA_MODULE
+#define CONFIG_COMEDI_DAS08_ISA
+#endif
+#ifdef CONFIG_COMEDI_DAS08_PCI_MODULE
+#define CONFIG_COMEDI_DAS08_PCI
+#endif
+#ifdef CONFIG_COMEDI_DAS08_CS_MODULE
+#define CONFIG_COMEDI_DAS08_CS
+#endif
+
+#if defined(CONFIG_COMEDI_DAS08_ISA) || defined(CONFIG_COMEDI_DAS08_PCI)
+#define DO_COMEDI_DRIVER_REGISTER
+#endif
+
 #define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
 #define PCI_DEVICE_ID_PCIDAS08 0x29
 #define PCIDAS08_SIZE 0x54
@@ -160,6 +174,7 @@ static int das08_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data);
 static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data);
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_di_rbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
@@ -172,6 +187,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
 static int das08ao_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
+#endif
 static void i8254_set_mode_low(unsigned int base, int channel,
 			       unsigned int mode);
 
@@ -253,7 +269,9 @@ static const int *const das08_gainlists[] = {
 	das08_pgm_gainlist,
 };
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static const struct das08_board_struct das08_boards[] = {
+#ifdef CONFIG_COMEDI_DAS08_ISA
 	{
 	 .name = "isa-das08",	/*  cio-das08.pdf */
 	 .bustype = isa,
@@ -395,25 +413,6 @@ static const struct das08_board_struct das08_boards[] = {
 	 .i8254_offset = 0x04,
 	 .iosize = 16,		/*  unchecked */
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "das08",	/*  pci-das08 */
-	 .id = PCI_DEVICE_ID_PCIDAS08,
-	 .bustype = pci,
-	 .ai = das08_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_pg = das08_bipolar5,
-	 .ai_encoding = das08_encode12,
-	 .ao = NULL,
-	 .ao_nbits = 0,
-	 .di = das08_di_rbits,
-	 .do_ = das08_do_wbits,
-	 .do_nchan = 4,
-	 .i8255_offset = 0,
-	 .i8254_offset = 4,
-	 .iosize = 8,
-	 },
-#endif
 	{
 	 .name = "pc104-das08",
 	 .bustype = pc104,
@@ -462,9 +461,30 @@ static const struct das08_board_struct das08_boards[] = {
 	 .name = "das08-pga-g2",	/*  a KM board */
 	 },
 #endif
+#endif /* CONFIG_COMEDI_DAS08_ISA */
+#ifdef CONFIG_COMEDI_DAS08_PCI
+	{
+	 .name = "das08",	/*  pci-das08 */
+	 .id = PCI_DEVICE_ID_PCIDAS08,
+	 .bustype = pci,
+	 .ai = das08_ai_rinsn,
+	 .ai_nbits = 12,
+	 .ai_pg = das08_bipolar5,
+	 .ai_encoding = das08_encode12,
+	 .ao = NULL,
+	 .ao_nbits = 0,
+	 .di = das08_di_rbits,
+	 .do_ = das08_do_wbits,
+	 .do_nchan = 4,
+	 .i8255_offset = 0,
+	 .i8254_offset = 4,
+	 .iosize = 8,
+	 },
+#endif /* CONFIG_COMEDI_DAS08_PCI */
 };
+#endif /* DO_COMEDI_DRIVER_REGISTER */
 
-#ifdef CONFIG_COMEDI_PCMCIA
+#ifdef CONFIG_COMEDI_DAS08_CS
 struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 	{
 	 .name = "pcm-das08",
@@ -504,7 +524,7 @@ struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 };
 #endif
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08) },
 	{0}
@@ -619,6 +639,7 @@ static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
 	return 2;
 }
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_di_rbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -628,7 +649,9 @@ static int das08jr_di_rbits(struct comedi_device *dev,
 
 	return 2;
 }
+#endif
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_do_wbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -643,7 +666,9 @@ static int das08jr_do_wbits(struct comedi_device *dev,
 
 	return 2;
 }
+#endif
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -672,6 +697,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
 
 	return n;
 }
+#endif
 
 /*
  *
@@ -679,6 +705,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
  * a different method to force an update.
  *
  */
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08ao_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -707,6 +734,7 @@ static int das08ao_ao_winsn(struct comedi_device *dev,
 
 	return n;
 }
+#endif
 
 static unsigned int i8254_read_channel_low(unsigned int base, int chan)
 {
@@ -842,6 +870,7 @@ static int das08_counter_config(struct comedi_device *dev,
 	return 2;
 }
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
 static struct comedi_driver driver_das08 = {
@@ -853,6 +882,7 @@ static struct comedi_driver driver_das08 = {
 	.num_names = sizeof(das08_boards) / sizeof(struct das08_board_struct),
 	.offset = sizeof(struct das08_board_struct),
 };
+#endif
 
 int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 {
@@ -972,11 +1002,12 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 }
 EXPORT_SYMBOL_GPL(das08_common_attach);
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	unsigned long pci_iobase = 0;
 	struct pci_dev *pdev = NULL;
 #endif
@@ -986,9 +1017,9 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return ret;
 
 	printk(KERN_INFO "comedi%d: das08: ", dev->minor);
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	/*  deal with a pci board */
 	if (thisboard->bustype == pci) {
-#ifdef CONFIG_COMEDI_PCI
 		if (it->options[0] || it->options[1]) {
 			printk("bus %i slot %i ",
 			       it->options[0], it->options[1]);
@@ -1037,17 +1068,16 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/* Enable local interrupt 1 and pci interrupt */
 		outw(INTR1_ENABLE | PCI_INTR_ENABLE, pci_iobase + INTCSR);
 #endif
-#else /* CONFIG_COMEDI_PCI */
-		printk(KERN_ERR "this driver has not been built with PCI support.\n");
-		return -EINVAL;
-#endif /* CONFIG_COMEDI_PCI */
-	} else {
+	} else
+#endif /* CONFIG_COMEDI_DAS08_PCI */
+	{
 		iobase = it->options[0];
 	}
 	printk(KERN_INFO "\n");
 
 	return das08_common_attach(dev, iobase);
 }
+#endif /* DO_COMEDI_DRIVER_REGISTER */
 
 
 int das08_common_detach(struct comedi_device *dev)
@@ -1062,7 +1092,7 @@ int das08_common_detach(struct comedi_device *dev)
 		if (dev->iobase)
 			release_region(dev->iobase, thisboard->iosize);
 	}
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	if (devpriv) {
 		if (devpriv->pdev) {
 			if (devpriv->pci_iobase)
@@ -1077,11 +1107,11 @@ int das08_common_detach(struct comedi_device *dev)
 }
 EXPORT_SYMBOL_GPL(das08_common_detach);
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 static int __devinit driver_das08_pci_probe(struct pci_dev *dev,
 					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_das08.driver_name);
+	return comedi_pci_auto_config(dev, &driver_das08);
 }
 
 static void __devexit driver_das08_pci_remove(struct pci_dev *dev)
@@ -1094,43 +1124,38 @@ static struct pci_driver driver_das08_pci_driver = {
 	.probe = &driver_das08_pci_probe,
 	.remove = __devexit_p(&driver_das08_pci_remove)
 };
+#endif /* CONFIG_COMEDI_DAS08_PCI */
 
 static int __init driver_das08_init_module(void)
 {
-	int retval;
+	int retval = 0;
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 	retval = comedi_driver_register(&driver_das08);
 	if (retval < 0)
 		return retval;
-
+#endif
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	driver_das08_pci_driver.name = (char *)driver_das08.driver_name;
-	return pci_register_driver(&driver_das08_pci_driver);
+	retval = pci_register_driver(&driver_das08_pci_driver);
+#endif
+	return retval;
 }
 
 static void __exit driver_das08_cleanup_module(void)
 {
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	pci_unregister_driver(&driver_das08_pci_driver);
+#endif
+#ifdef DO_COMEDI_DRIVER_REGISTER
 	comedi_driver_unregister(&driver_das08);
+#endif
 }
 
 module_init(driver_das08_init_module);
 module_exit(driver_das08_cleanup_module);
-#else
-static int __init driver_das08_init_module(void)
-{
-	return comedi_driver_register(&driver_das08);
-}
-
-static void __exit driver_das08_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_das08);
-}
-
-module_init(driver_das08_init_module);
-module_exit(driver_das08_cleanup_module);
-#endif
 
-#ifdef CONFIG_COMEDI_PCMCIA
+#ifdef CONFIG_COMEDI_DAS08_CS
 EXPORT_SYMBOL_GPL(das08_cs_boards);
 #endif
 
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index 4155da43fd51..f5a0dc501c6b 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -72,31 +72,6 @@ static const struct comedi_lrange
 #define DT2815_DATA 0
 #define DT2815_STATUS 1
 
-static int dt2815_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2815_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2815 = {
-	.driver_name = "dt2815",
-	.module = THIS_MODULE,
-	.attach = dt2815_attach,
-	.detach = dt2815_detach,
-};
-
-static int __init driver_dt2815_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2815);
-}
-
-static void __exit driver_dt2815_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2815);
-}
-
-module_init(driver_dt2815_init_module);
-module_exit(driver_dt2815_cleanup_module);
-
-static void dt2815_free_resources(struct comedi_device *dev);
-
 struct dt2815_private {
 
 	const struct comedi_lrange *range_type_list[8];
@@ -267,6 +242,25 @@ static int dt2815_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_dt2815 = {
+	.driver_name	= "dt2815",
+	.module		= THIS_MODULE,
+	.attach		= dt2815_attach,
+	.detach		= dt2815_detach,
+};
+
+static int __init driver_dt2815_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2815);
+}
+module_init(driver_dt2815_init_module);
+
+static void __exit driver_dt2815_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2815);
+}
+module_exit(driver_dt2815_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index 99c1584153d7..45d9a8296203 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -47,29 +47,6 @@ Configuration options:
 #define DT2817_CR 0
 #define DT2817_DATA 1
 
-static int dt2817_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2817_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2817 = {
-	.driver_name = "dt2817",
-	.module = THIS_MODULE,
-	.attach = dt2817_attach,
-	.detach = dt2817_detach,
-};
-
-static int __init driver_dt2817_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2817);
-}
-
-static void __exit driver_dt2817_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2817);
-}
-
-module_init(driver_dt2817_init_module);
-module_exit(driver_dt2817_cleanup_module);
-
 static int dt2817_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data)
@@ -192,6 +169,25 @@ static int dt2817_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_dt2817 = {
+	.driver_name	= "dt2817",
+	.module		= THIS_MODULE,
+	.attach		= dt2817_attach,
+	.detach		= dt2817_detach,
+};
+
+static int __init driver_dt2817_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2817);
+}
+module_init(driver_dt2817_init_module);
+
+static void __exit driver_dt2817_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2817);
+}
+module_exit(driver_dt2817_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 95ebc267bb74..210b3f0f6f01 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -350,7 +350,6 @@ static const struct dt282x_board boardtypes[] = {
 	 },
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dt282x_board))
 #define this_board ((const struct dt282x_board *)dev->board_ptr)
 
 struct dt282x_private {
@@ -420,7 +419,7 @@ static struct comedi_driver driver_dt282x = {
 	.attach = dt282x_attach,
 	.detach = dt282x_detach,
 	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.offset = sizeof(struct dt282x_board),
 };
 
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 0a7979e52999..d44c89d11ab4 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -289,7 +289,7 @@ static struct comedi_driver driver_dt3000 = {
 static int __devinit driver_dt3000_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_dt3000.driver_name);
+	return comedi_pci_auto_config(dev, &driver_dt3000);
 }
 
 static void __devexit driver_dt3000_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index e86ab5862895..cd3a44a0bfcc 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -196,7 +196,7 @@ struct dt9812_flash_data {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_RDS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
 
 struct dt9812_read_multi {
 	u8 count;
@@ -209,8 +209,8 @@ struct dt9812_write_byte {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_WRTS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
-      sizeof(struct dt9812_write_byte))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
+	 sizeof(struct dt9812_write_byte))
 
 struct dt9812_write_multi {
 	u8 count;
@@ -224,7 +224,8 @@ struct dt9812_rmw_byte {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_RMWS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(struct dt9812_rmw_byte))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
+	 sizeof(struct dt9812_rmw_byte))
 
 struct dt9812_rmw_multi {
 	u8 count;
@@ -365,7 +366,7 @@ static int dt9812_read_info(struct usb_dt9812 *dev, int offset, void *buf,
 }
 
 static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
-					  u8 * address, u8 * value)
+					  u8 *address, u8 *value)
 {
 	struct dt9812_usb_cmd cmd;
 	int i, count, retval;
@@ -391,8 +392,8 @@ static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
 }
 
 static int dt9812_write_multiple_registers(struct usb_dt9812 *dev,
-					   int reg_count, u8 * address,
-					   u8 * value)
+					   int reg_count, u8 *address,
+					   u8 *value)
 {
 	struct dt9812_usb_cmd cmd;
 	int i, count, retval;
@@ -430,7 +431,7 @@ static int dt9812_rmw_multiple_registers(struct usb_dt9812 *dev, int reg_count,
 	return retval;
 }
 
-static int dt9812_digital_in(struct slot_dt9812 *slot, u8 * bits)
+static int dt9812_digital_in(struct slot_dt9812 *slot, u8 *bits)
 {
 	int result = -ENODEV;
 
@@ -476,7 +477,7 @@ static int dt9812_digital_out(struct slot_dt9812 *slot, u8 bits)
 	return result;
 }
 
-static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 * bits)
+static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 *bits)
 {
 	int result = -ENODEV;
 
@@ -547,12 +548,12 @@ static void dt9812_configure_gain(struct usb_dt9812 *dev,
 		rmw->or_value = F020_MASK_ADC0CF_AMP0GN2;
 		break;
 	default:
-		err("Illegal gain %d\n", gain);
+		dev_err(&dev->interface->dev, "Illegal gain %d\n", gain);
 
 	}
 }
 
-static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 * value,
+static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 *value,
 			    enum dt9812_gain gain)
 {
 	struct dt9812_rmw_byte rmw[3];
@@ -619,7 +620,7 @@ exit:
 }
 
 static int dt9812_analog_out_shadow(struct slot_dt9812 *slot, int channel,
-				    u16 * value)
+				    u16 *value)
 {
 	int result = -ENODEV;
 
@@ -715,7 +716,7 @@ static int dt9812_probe(struct usb_interface *interface,
 	iface_desc = interface->cur_altsetting;
 
 	if (iface_desc->desc.bNumEndpoints != 5) {
-		err("Wrong number of endpints.");
+		dev_err(&interface->dev, "Wrong number of endpoints.\n");
 		retval = -ENODEV;
 		goto error;
 	}
@@ -781,22 +782,22 @@ static int dt9812_probe(struct usb_interface *interface,
 	}
 
 	if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) {
-		err("Failed to read vendor.");
+		dev_err(&interface->dev, "Failed to read vendor.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) {
-		err("Failed to read product.");
+		dev_err(&interface->dev, "Failed to read product.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) {
-		err("Failed to read device.");
+		dev_err(&interface->dev, "Failed to read device.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) {
-		err("Failed to read serial.");
+		dev_err(&interface->dev, "Failed to read serial.\n");
 		retval = -ENODEV;
 		goto error;
 	}
@@ -1146,7 +1147,9 @@ static int __init usb_dt9812_init(void)
 	result = comedi_driver_register(&dt9812_comedi_driver);
 	if (result) {
 		usb_deregister(&dt9812_usb_driver);
-		err("comedi_driver_register failed. Error number %d", result);
+		printk(KERN_ERR KBUILD_MODNAME
+			": comedi_driver_register failed. Error number %d\n",
+			result);
 	}
 
 	return result;
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index da8a2bf31657..f54e7ffb749c 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -421,7 +421,7 @@ static int dyna_pci10xx_detach(struct comedi_device *dev)
 static int __devinit driver_dyna_pci10xx_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_dyna_pci10xx.driver_name);
+	return comedi_pci_auto_config(dev, &driver_dyna_pci10xx);
 }
 
 static void __devexit driver_dyna_pci10xx_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index 7f49add60b21..88c18ea36e12 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -42,38 +42,6 @@ static const struct comedi_lrange range_fl512 = { 4, {
 						      }
 };
 
-static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int fl512_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_fl512 = {
-	.driver_name = "fl512",
-	.module = THIS_MODULE,
-	.attach = fl512_attach,
-	.detach = fl512_detach,
-};
-
-static int __init driver_fl512_init_module(void)
-{
-	return comedi_driver_register(&driver_fl512);
-}
-
-static void __exit driver_fl512_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_fl512);
-}
-
-module_init(driver_fl512_init_module);
-module_exit(driver_fl512_cleanup_module);
-
-static int fl512_ai_insn(struct comedi_device *dev,
-			 struct comedi_subdevice *s, struct comedi_insn *insn,
-			 unsigned int *data);
-static int fl512_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int fl512_ao_insn_readback(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
 /*
  * fl512_ai_insn : this is the analog input function
  */
@@ -140,9 +108,6 @@ static int fl512_ao_insn_readback(struct comedi_device *dev,
 	return n;
 }
 
-/*
- * start attach
- */
 static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
@@ -217,6 +182,25 @@ static int fl512_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_fl512 = {
+	.driver_name	= "fl512",
+	.module		= THIS_MODULE,
+	.attach		= fl512_attach,
+	.detach		= fl512_detach,
+};
+
+static int __init driver_fl512_init_module(void)
+{
+	return comedi_driver_register(&driver_fl512);
+}
+module_init(driver_fl512_init_module);
+
+static void __exit driver_fl512_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_fl512);
+}
+module_exit(driver_fl512_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index bc020dea141b..a7b9f6e1e111 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -348,7 +348,7 @@ static struct comedi_driver driver_hpdi = {
 static int __devinit driver_hpdi_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_hpdi.driver_name);
+	return comedi_pci_auto_config(dev, &driver_hpdi);
 }
 
 static void __devexit driver_hpdi_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 126550f3c02b..67b6f5aa1885 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -173,14 +173,12 @@ static const struct boardtype boardtypes[] = {
 	 &range_analog},	/*  Rangelist for D/A */
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
 static struct comedi_driver driver_icp_multi = {
 	.driver_name = "icp_multi",
 	.module = THIS_MODULE,
 	.attach = icp_multi_attach,
 	.detach = icp_multi_detach,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.board_name = &boardtypes[0].name,
 	.offset = sizeof(struct boardtype),
 };
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 6a79ba10630d..114885d0616d 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -977,7 +977,7 @@ static int jr3_pci_detach(struct comedi_device *dev)
 static int __devinit driver_jr3_pci_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_jr3_pci.driver_name);
+	return comedi_pci_auto_config(dev, &driver_jr3_pci);
 }
 
 static void __devexit driver_jr3_pci_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 4e9e9a078652..0db76a502924 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -46,18 +46,6 @@ Kolter Electronic PCI Counter Card.
 #define PCI_VENDOR_ID_KOLTER    0x1001
 #define CNT_CARD_DEVICE_ID      0x0014
 
-/*-- function prototypes ----------------------------------------------------*/
-
-static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int cnt_detach(struct comedi_device *dev);
-
-static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, cnt_pci_table);
-
 /*-- board specification structure ------------------------------------------*/
 
 struct cnt_board_struct {
@@ -87,51 +75,6 @@ struct cnt_device_private {
 
 #define devpriv ((struct cnt_device_private *)dev->private)
 
-static struct comedi_driver cnt_driver = {
-	.driver_name = CNT_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = cnt_attach,
-	.detach = cnt_detach,
-};
-
-static int __devinit cnt_driver_pci_probe(struct pci_dev *dev,
-					  const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, cnt_driver.driver_name);
-}
-
-static void __devexit cnt_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver cnt_driver_pci_driver = {
-	.id_table = cnt_pci_table,
-	.probe = &cnt_driver_pci_probe,
-	.remove = __devexit_p(&cnt_driver_pci_remove)
-};
-
-static int __init cnt_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&cnt_driver);
-	if (retval < 0)
-		return retval;
-
-	cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name;
-	return pci_register_driver(&cnt_driver_pci_driver);
-}
-
-static void __exit cnt_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&cnt_driver_pci_driver);
-	comedi_driver_unregister(&cnt_driver);
-}
-
-module_init(cnt_driver_init_module);
-module_exit(cnt_driver_cleanup_module);
-
 /*-- counter write ----------------------------------------------------------*/
 
 /* This should be used only for resetting the counters; maybe it is better
@@ -181,8 +124,6 @@ static int cnt_rinsn(struct comedi_device *dev,
 	return 1;
 }
 
-/*-- attach -----------------------------------------------------------------*/
-
 static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *subdevice;
@@ -278,8 +219,6 @@ found:
 	return 0;
 }
 
-/*-- detach -----------------------------------------------------------------*/
-
 static int cnt_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->pcidev) {
@@ -292,6 +231,56 @@ static int cnt_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver cnt_driver = {
+	.driver_name	= CNT_DRIVER_NAME,
+	.module		= THIS_MODULE,
+	.attach		= cnt_attach,
+	.detach		= cnt_detach,
+};
+
+static int __devinit cnt_driver_pci_probe(struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &cnt_driver);
+}
+
+static void __devexit cnt_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, cnt_pci_table);
+
+static struct pci_driver cnt_driver_pci_driver = {
+	.id_table	= cnt_pci_table,
+	.probe		= cnt_driver_pci_probe,
+	.remove		= __devexit_p(cnt_driver_pci_remove),
+};
+
+static int __init cnt_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&cnt_driver);
+	if (retval < 0)
+		return retval;
+
+	cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name;
+	return pci_register_driver(&cnt_driver_pci_driver);
+}
+module_init(cnt_driver_init_module);
+
+static void __exit cnt_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&cnt_driver_pci_driver);
+	comedi_driver_unregister(&cnt_driver);
+}
+module_exit(cnt_driver_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index b0bc6bb877ab..54bcacc3a1e6 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -2427,7 +2427,7 @@ static int me4000_cnt_insn_write(struct comedi_device *dev,
 static int __devinit driver_me4000_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_me4000.driver_name);
+	return comedi_pci_auto_config(dev, &driver_me4000);
 }
 
 static void __devexit driver_me4000_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 8b812e41c52b..e286dcb21d16 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -257,7 +257,7 @@ static struct comedi_driver me_driver = {
 static int __devinit me_driver_pci_probe(struct pci_dev *dev,
 					 const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, me_driver.driver_name);
+	return comedi_pci_auto_config(dev, &me_driver);
 }
 
 static void __devexit me_driver_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 54741c9e1af5..75c146d75f35 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -493,7 +493,7 @@ static int ni6527_find_device(struct comedi_device *dev, int bus, int slot)
 static int __devinit driver_ni6527_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni6527.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni6527);
 }
 
 static void __devexit driver_ni6527_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 403fc0997d37..4a3f54ed3ce7 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -837,7 +837,7 @@ static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
 static int __devinit driver_ni_65xx_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_65xx.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_65xx);
 }
 
 static void __devexit driver_ni_65xx_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 35f3a4749825..eea7047f6eac 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -474,7 +474,7 @@ static struct comedi_driver driver_ni_660x = {
 static int __devinit driver_ni_660x_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_660x.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_660x);
 }
 
 static void __devexit driver_ni_660x_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index d8d91f90060e..c74efc40679b 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -123,7 +123,7 @@ static struct comedi_driver driver_ni_670x = {
 static int __devinit driver_ni_670x_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_670x.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_670x);
 }
 
 static void __devexit driver_ni_670x_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index c25e44c1905e..4fc469da45e2 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -539,7 +539,10 @@ static int a2150_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources are unique and mutually
+	 * compatible
+	 */
 
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
 		err++;
@@ -771,7 +774,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	/*  start acquisition for soft trigger */
 	outw(0, dev->iobase + FIFO_START_REG);
 
-	/* there is a 35.6 sample delay for data to get through the antialias filter */
+	/*
+	 * there is a 35.6 sample delay for data to get through the
+	 * antialias filter
+	 */
 	for (n = 0; n < filter_delay; n++) {
 		for (i = 0; i < timeout; i++) {
 			if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
@@ -812,8 +818,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return n;
 }
 
-/* sets bits in devpriv->clock_bits to nearest approximation of requested period,
- * adjusts requested period to actual timing. */
+/*
+ * sets bits in devpriv->clock_bits to nearest approximation of requested
+ * period, adjusts requested period to actual timing.
+ */
 static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
 			    int flags)
 {
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 721b2be22500..b281fc6e6b7d 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -2141,7 +2141,7 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
 static int __devinit driver_labpc_pci_probe(struct pci_dev *dev,
 					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_labpc.driver_name);
+	return comedi_pci_auto_config(dev, &driver_labpc);
 }
 
 static void __devexit driver_labpc_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 1df8fcbcd108..64528413cf91 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -1359,7 +1359,7 @@ static int nidio_find_device(struct comedi_device *dev, int bus, int slot)
 static int __devinit driver_pcidio_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pcidio.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pcidio);
 }
 
 static void __devexit driver_pcidio_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 27baefa32b17..1065b2cbcc54 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1263,7 +1263,7 @@ static struct comedi_driver driver_pcimio = {
 static int __devinit driver_pcimio_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pcimio.driver_name);
+	return comedi_pci_auto_config(dev, &driver_pcimio);
 }
 
 static void __devexit driver_pcimio_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_tio_internal.h b/drivers/staging/comedi/drivers/ni_tio_internal.h
index c4ca53785832..5e00212aa022 100644
--- a/drivers/staging/comedi/drivers/ni_tio_internal.h
+++ b/drivers/staging/comedi/drivers/ni_tio_internal.h
@@ -362,8 +362,8 @@ static inline enum ni_gpct_register NITIO_Gi_ABZ_Reg(int counter_index)
 	return 0;
 }
 
-static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg(int
-								       counter_index)
+static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg(
+	int counter_index)
 {
 	switch (counter_index) {
 	case 0:
@@ -407,8 +407,8 @@ static inline enum ni_gpct_register NITIO_Gi_Status_Reg(int counter_index)
 	return 0;
 }
 
-static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg(int
-								  counter_index)
+static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg(
+	int counter_index)
 {
 	switch (counter_index) {
 	case 0:
@@ -472,15 +472,22 @@ enum Gi_Counting_Mode_Reg_Bits {
 	Gi_Index_Phase_LowA_HighB = 0x1 << Gi_Index_Phase_Bitshift,
 	Gi_Index_Phase_HighA_LowB = 0x2 << Gi_Index_Phase_Bitshift,
 	Gi_Index_Phase_HighA_HighB = 0x3 << Gi_Index_Phase_Bitshift,
-	Gi_HW_Arm_Enable_Bit = 0x80,	/* from m-series example code, not documented in 660x register level manual */
-	Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift,	/* from m-series example code, not documented in 660x register level manual */
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_HW_Arm_Enable_Bit = 0x80,
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift,
 	Gi_660x_Prescale_X8_Bit = 0x1000,
 	Gi_M_Series_Prescale_X8_Bit = 0x2000,
 	Gi_M_Series_HW_Arm_Select_Mask = 0x1f << Gi_HW_Arm_Select_Shift,
-	/* must be set for clocks over 40MHz, which includes synchronous counting and quadrature modes */
+	/* must be set for clocks over 40MHz, which includes synchronous
+	 * counting and quadrature modes */
 	Gi_660x_Alternate_Sync_Bit = 0x2000,
 	Gi_M_Series_Alternate_Sync_Bit = 0x4000,
-	Gi_660x_Prescale_X2_Bit = 0x4000,	/* from m-series example code, not documented in 660x register level manual */
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_660x_Prescale_X2_Bit = 0x4000,
 	Gi_M_Series_Prescale_X2_Bit = 0x8000,
 };
 
@@ -503,7 +510,8 @@ enum Gi_Mode_Bits {
 	Gi_Level_Gating_Bits = 0x1,
 	Gi_Rising_Edge_Gating_Bits = 0x2,
 	Gi_Falling_Edge_Gating_Bits = 0x3,
-	Gi_Gate_On_Both_Edges_Bit = 0x4,	/* used in conjunction with rising edge gating mode */
+	Gi_Gate_On_Both_Edges_Bit = 0x4,	/* used in conjunction with
+						 * rising edge gating mode */
 	Gi_Trigger_Mode_for_Edge_Gate_Mask = 0x18,
 	Gi_Edge_Gate_Starts_Stops_Bits = 0x0,
 	Gi_Edge_Gate_Stops_Starts_Bits = 0x8,
@@ -686,11 +694,10 @@ static inline unsigned Gi_Gate_Interrupt_Enable_Bit(unsigned counter_index)
 {
 	unsigned bit;
 
-	if (counter_index % 2) {
+	if (counter_index % 2)
 		bit = G1_Gate_Interrupt_Enable_Bit;
-	} else {
+	else
 		bit = G0_Gate_Interrupt_Enable_Bit;
-	}
 	return bit;
 }
 
@@ -748,8 +755,9 @@ static inline void ni_tio_set_bits_transient(struct ni_gpct *counter,
 }
 
 /* ni_tio_set_bits( ) is for safely writing to registers whose bits may be
-twiddled in interrupt context, or whose software copy may be read in interrupt context.
-*/
+ * twiddled in interrupt context, or whose software copy may be read in
+ * interrupt context.
+ */
 static inline void ni_tio_set_bits(struct ni_gpct *counter,
 				   enum ni_gpct_register register_index,
 				   unsigned bit_mask, unsigned bit_values)
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index b44386a6b636..fcb7cea761ac 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -148,42 +148,8 @@ struct pcl711_board {
 	const struct comedi_lrange *ai_range_type;
 };
 
-static const struct pcl711_board boardtypes[] = {
-	{"pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5},
-	{"pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai},
-	{"acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai},
-	{"acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl711_board))
 #define this_board ((const struct pcl711_board *)dev->board_ptr)
 
-static int pcl711_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl711_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcl711 = {
-	.driver_name = "pcl711",
-	.module = THIS_MODULE,
-	.attach = pcl711_attach,
-	.detach = pcl711_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl711_board),
-};
-
-static int __init driver_pcl711_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl711);
-}
-
-static void __exit driver_pcl711_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl711);
-}
-
-module_init(driver_pcl711_init_module);
-module_exit(driver_pcl711_cleanup_module);
-
 struct pcl711_private {
 
 	int board;
@@ -513,21 +479,6 @@ static int pcl711_do_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-/*  Free any resources that we have claimed  */
-static int pcl711_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor);
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-
-	if (dev->iobase)
-		release_region(dev->iobase, PCL711_SIZE);
-
-	return 0;
-}
-
-/*  Initialization */
 static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -640,6 +591,48 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
+static int pcl711_detach(struct comedi_device *dev)
+{
+	printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor);
+
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+
+	if (dev->iobase)
+		release_region(dev->iobase, PCL711_SIZE);
+
+	return 0;
+}
+
+static const struct pcl711_board boardtypes[] = {
+	{ "pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5 },
+	{ "pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai },
+	{ "acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai },
+	{ "acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai },
+};
+
+static struct comedi_driver driver_pcl711 = {
+	.driver_name	= "pcl711",
+	.module		= THIS_MODULE,
+	.attach		= pcl711_attach,
+	.detach		= pcl711_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl711_board),
+};
+
+static int __init driver_pcl711_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl711);
+}
+module_init(driver_pcl711_init_module);
+
+static void __exit driver_pcl711_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl711);
+}
+module_exit(driver_pcl711_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index 61b075db66ef..7d0a306ccaae 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -56,10 +56,6 @@ See the source for configuration details.
 
 /* #define PCL724_IRQ   1  no IRQ support now */
 
-static int pcl724_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl724_detach(struct comedi_device *dev);
-
 struct pcl724_board {
 
 	const char *name;	/*  board name */
@@ -71,41 +67,8 @@ struct pcl724_board {
 	char is_pet48;
 };
 
-static const struct pcl724_board boardtypes[] = {
-	{"pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,},
-	{"pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0,},
-	{"pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0,},
-	{"acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0,},
-	{"acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,},
-	{"pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl724_board))
 #define this_board ((const struct pcl724_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl724 = {
-	.driver_name = "pcl724",
-	.module = THIS_MODULE,
-	.attach = pcl724_attach,
-	.detach = pcl724_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl724_board),
-};
-
-static int __init driver_pcl724_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl724);
-}
-
-static void __exit driver_pcl724_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl724);
-}
-
-module_init(driver_pcl724_init_module);
-module_exit(driver_pcl724_cleanup_module);
-
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
 {
 	unsigned long iobase = arg;
@@ -233,6 +196,37 @@ static int pcl724_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcl724_board boardtypes[] = {
+	{ "pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, },
+	{ "pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0, },
+	{ "pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0, },
+	{ "acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0, },
+	{ "acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, },
+	{ "pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1, },
+};
+
+static struct comedi_driver driver_pcl724 = {
+	.driver_name	= "pcl724",
+	.module		= THIS_MODULE,
+	.attach		= pcl724_attach,
+	.detach		= pcl724_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl724_board),
+};
+
+static int __init driver_pcl724_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl724);
+}
+module_init(driver_pcl724_init_module);
+
+static void __exit driver_pcl724_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl724);
+}
+module_exit(driver_pcl724_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl725.c b/drivers/staging/comedi/drivers/pcl725.c
index 24b223ca4399..4b761a67ac1c 100644
--- a/drivers/staging/comedi/drivers/pcl725.c
+++ b/drivers/staging/comedi/drivers/pcl725.c
@@ -20,29 +20,6 @@ Devices: [Advantech] PCL-725 (pcl725)
 #define PCL725_DO 0
 #define PCL725_DI 1
 
-static int pcl725_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl725_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcl725 = {
-	.driver_name = "pcl725",
-	.module = THIS_MODULE,
-	.attach = pcl725_attach,
-	.detach = pcl725_detach,
-};
-
-static int __init driver_pcl725_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl725);
-}
-
-static void __exit driver_pcl725_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl725);
-}
-
-module_init(driver_pcl725_init_module);
-module_exit(driver_pcl725_cleanup_module);
-
 static int pcl725_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
@@ -122,6 +99,25 @@ static int pcl725_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_pcl725 = {
+	.driver_name	= "pcl725",
+	.module		= THIS_MODULE,
+	.attach		= pcl725_attach,
+	.detach		= pcl725_detach,
+};
+
+static int __init driver_pcl725_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl725);
+}
+module_init(driver_pcl725_init_module);
+
+static void __exit driver_pcl725_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl725);
+}
+module_exit(driver_pcl725_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 897cd808eeb7..c63e91c2bca3 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -111,10 +111,6 @@ static const struct comedi_lrange *const rangelist_728[] = {
 	&range_4_20mA, &range_0_20mA
 };
 
-static int pcl726_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl726_detach(struct comedi_device *dev);
-
 struct pcl726_board {
 
 	const char *name;	/*  driver name */
@@ -149,32 +145,8 @@ static const struct pcl726_board boardtypes[] = {
 	 &rangelist_728[0],},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl726_board))
 #define this_board ((const struct pcl726_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl726 = {
-	.driver_name = "pcl726",
-	.module = THIS_MODULE,
-	.attach = pcl726_attach,
-	.detach = pcl726_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl726_board),
-};
-
-static int __init driver_pcl726_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl726);
-}
-
-static void __exit driver_pcl726_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl726);
-}
-
-module_init(driver_pcl726_init_module);
-module_exit(driver_pcl726_cleanup_module);
-
 struct pcl726_private {
 
 	int bipolar[12];
@@ -393,6 +365,28 @@ static int pcl726_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_pcl726 = {
+	.driver_name	= "pcl726",
+	.module		= THIS_MODULE,
+	.attach		= pcl726_attach,
+	.detach		= pcl726_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl726_board),
+};
+
+static int __init driver_pcl726_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl726);
+}
+module_init(driver_pcl726_init_module);
+
+static void __exit driver_pcl726_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl726);
+}
+module_exit(driver_pcl726_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index c9682d614e0e..f6fa8aeab918 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -26,48 +26,14 @@ The ACL-7130 card have an 8254 timer/counter not supported by this driver.
 #define PCL730_DIO_LO	2	/* TTL Digital I/O low byte (D0-D7) */
 #define PCL730_DIO_HI	3	/* TTL Digital I/O high byte (D8-D15) */
 
-static int pcl730_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl730_detach(struct comedi_device *dev);
-
 struct pcl730_board {
 
 	const char *name;	/*  board name */
 	unsigned int io_range;	/*  len of I/O space */
 };
 
-static const struct pcl730_board boardtypes[] = {
-	{"pcl730", PCL730_SIZE,},
-	{"iso730", PCL730_SIZE,},
-	{"acl7130", ACL7130_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl730_board))
 #define this_board ((const struct pcl730_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl730 = {
-	.driver_name = "pcl730",
-	.module = THIS_MODULE,
-	.attach = pcl730_attach,
-	.detach = pcl730_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl730_board),
-};
-
-static int __init driver_pcl730_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl730);
-}
-
-static void __exit driver_pcl730_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl730);
-}
-
-module_init(driver_pcl730_init_module);
-module_exit(driver_pcl730_cleanup_module);
-
 static int pcl730_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
@@ -178,6 +144,34 @@ static int pcl730_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcl730_board boardtypes[] = {
+	{ "pcl730", PCL730_SIZE, },
+	{ "iso730", PCL730_SIZE, },
+	{ "acl7130", ACL7130_SIZE, },
+};
+
+static struct comedi_driver driver_pcl730 = {
+	.driver_name	= "pcl730",
+	.module		= THIS_MODULE,
+	.attach		= pcl730_attach,
+	.detach		= pcl730_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl730_board),
+};
+
+static int __init driver_pcl730_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl730);
+}
+module_init(driver_pcl730_init_module);
+
+static void __exit driver_pcl730_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl730);
+}
+module_exit(driver_pcl730_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 6fc74645af2c..85463e275e59 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -316,10 +316,6 @@ static const struct comedi_lrange range_a821pgh_ai = { 4, {
 							   }
 };
 
-static int pcl812_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl812_detach(struct comedi_device *dev);
-
 struct pcl812_board {
 
 	const char *name;	/*  board name */
@@ -340,89 +336,8 @@ struct pcl812_board {
 	unsigned char haveMPC508;	/*  1=board use MPC508A multiplexor */
 };
 
-static const struct pcl812_board boardtypes[] = {
-	{"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_bipolar10, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_pcl812pg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl812pg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, &range_unipolar5,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, NULL,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_a821pgh_ai, &range_unipolar5,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_pcl813b_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_pcl813b_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_acl8113_1_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_iso813_1_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl812_board))
 #define this_board ((const struct pcl812_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl812 = {
-	.driver_name = "pcl812",
-	.module = THIS_MODULE,
-	.attach = pcl812_attach,
-	.detach = pcl812_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl812_board),
-};
-
-static int __init driver_pcl812_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl812);
-}
-
-static void __exit driver_pcl812_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl812);
-}
-
-module_init(driver_pcl812_init_module);
-module_exit(driver_pcl812_cleanup_module);
-
 struct pcl812_private {
 
 	unsigned char valid;	/*  =1 device is OK */
@@ -1356,9 +1271,6 @@ static void pcl812_reset(struct comedi_device *dev)
 #endif
 }
 
-/*
-==============================================================================
-*/
 static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret, subdev;
@@ -1702,9 +1614,6 @@ no_dma:
 	return 0;
 }
 
-/*
-==============================================================================
- */
 static int pcl812_detach(struct comedi_device *dev)
 {
 
@@ -1715,6 +1624,85 @@ static int pcl812_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcl812_board boardtypes[] = {
+	{"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff,
+	 33000, 500, &range_bipolar10, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
+	 33000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff,
+	 10000, 500, &range_pcl813b_ai, &range_unipolar5,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff,
+	 10000, 500, &range_pcl813b_ai, NULL,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff,
+	 10000, 500, &range_a821pgh_ai, &range_unipolar5,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 8000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 8000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_pcl813b_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_pcl813b_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_acl8113_1_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_iso813_1_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
+	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
+	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+};
+
+static struct comedi_driver driver_pcl812 = {
+	.driver_name	= "pcl812",
+	.module		= THIS_MODULE,
+	.attach		= pcl812_attach,
+	.detach		= pcl812_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl812_board),
+};
+
+static int __init driver_pcl812_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl812);
+}
+module_init(driver_pcl812_init_module);
+
+static void __exit driver_pcl812_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl812);
+}
+module_exit(driver_pcl812_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 96cd7ec2ad53..bccbb236d37d 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -125,63 +125,14 @@ struct pcl816_board {
 	int i8254_osc_base;	/*  1/frequency of on board oscilator in ns */
 };
 
-static const struct pcl816_board boardtypes[] = {
-	{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
-	 &range_pcl816, PCLx1x_RANGE,
-	 0x00fc,		/*  IRQ mask */
-	 0x0a,			/*  DMA mask */
-	 0xffff,		/*  16-bit card */
-	 0xffff,		/*  D/A maxdata */
-	 1024,
-	 1,			/*  ao chan list */
-	 100},
-	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
-	 &range_pcl816, PCLx1x_RANGE,
-	 0x00fc,
-	 0x0a,
-	 0x3fff,		/* 14 bit card */
-	 0x3fff,
-	 1024,
-	 1,
-	 100},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl816_board))
 #define devpriv ((struct pcl816_private *)dev->private)
 #define this_board ((const struct pcl816_board *)dev->board_ptr)
 
-static int pcl816_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl816_detach(struct comedi_device *dev);
-
 #ifdef unused
 static int RTC_lock;	/* RTC lock */
 static int RTC_timer_lock;	/* RTC int lock */
 #endif
 
-static struct comedi_driver driver_pcl816 = {
-	.driver_name = "pcl816",
-	.module = THIS_MODULE,
-	.attach = pcl816_attach,
-	.detach = pcl816_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl816_board),
-};
-
-static int __init driver_pcl816_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl816);
-}
-
-static void __exit driver_pcl816_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl816);
-}
-
-module_init(driver_pcl816_init_module);
-module_exit(driver_pcl816_cleanup_module);
-
 struct pcl816_private {
 
 	unsigned int dma;	/*  used DMA, 0=don't use DMA */
@@ -1109,12 +1060,6 @@ static void free_resources(struct comedi_device *dev)
 	/* printk("free_resource() end\n"); */
 }
 
-/*
-==============================================================================
-
-   Initialization
-
-*/
 static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -1340,10 +1285,6 @@ case COMEDI_SUBD_DO:
 	return 0;
 }
 
-/*
-==============================================================================
-  Removes device
- */
 static int pcl816_detach(struct comedi_device *dev)
 {
 	DEBUG(printk(KERN_INFO "comedi%d: pcl816: remove\n", dev->minor);)
@@ -1355,6 +1296,49 @@ static int pcl816_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcl816_board boardtypes[] = {
+	{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+	 &range_pcl816, PCLx1x_RANGE,
+	 0x00fc,		/*  IRQ mask */
+	 0x0a,			/*  DMA mask */
+	 0xffff,		/*  16-bit card */
+	 0xffff,		/*  D/A maxdata */
+	 1024,
+	 1,			/*  ao chan list */
+	 100},
+	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+	 &range_pcl816, PCLx1x_RANGE,
+	 0x00fc,
+	 0x0a,
+	 0x3fff,		/* 14 bit card */
+	 0x3fff,
+	 1024,
+	 1,
+	 100},
+};
+
+static struct comedi_driver driver_pcl816 = {
+	.driver_name	= "pcl816",
+	.module		= THIS_MODULE,
+	.attach		= pcl816_attach,
+	.detach		= pcl816_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl816_board),
+};
+
+static int __init driver_pcl816_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl816);
+}
+module_init(driver_pcl816_init_module);
+
+static void __exit driver_pcl816_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl816);
+}
+module_exit(driver_pcl816_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 7344a53a81c4..8dbefc51b2fc 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -247,10 +247,6 @@ static const struct comedi_lrange range718_bipolar0_5 =
 static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
 static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
 
-static int pcl818_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl818_detach(struct comedi_device *dev);
-
 #ifdef unused
 static int RTC_lock;	/* RTC lock */
 static int RTC_timer_lock;	/* RTC int lock */
@@ -277,56 +273,6 @@ struct pcl818_board {
 	int is_818;
 };
 
-static const struct pcl818_board boardtypes[] = {
-	{"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 1, 1},
-	{"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 1, 1},
-	{"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 0},
-	/* pcm3718 */
-	{"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl818_board))
-
-static struct comedi_driver driver_pcl818 = {
-	.driver_name = "pcl818",
-	.module = THIS_MODULE,
-	.attach = pcl818_attach,
-	.detach = pcl818_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl818_board),
-};
-
-static int __init driver_pcl818_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl818);
-}
-
-static void __exit driver_pcl818_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl818);
-}
-
-module_init(driver_pcl818_init_module);
-module_exit(driver_pcl818_cleanup_module);
-
 struct pcl818_private {
 
 	unsigned int dma;	/*  used DMA, 0=don't use DMA */
@@ -1724,12 +1670,6 @@ static void free_resources(struct comedi_device *dev)
 	/* printk("free_resource() end\n"); */
 }
 
-/*
-==============================================================================
-
-   Initialization
-
-*/
 static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -2020,10 +1960,6 @@ no_dma:
 	return 0;
 }
 
-/*
-==============================================================================
-  Removes device
- */
 static int pcl818_detach(struct comedi_device *dev)
 {
 	/*   printk("comedi%d: pcl818: remove\n", dev->minor); */
@@ -2031,6 +1967,53 @@ static int pcl818_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcl818_board boardtypes[] = {
+	{"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 1, 1},
+	{"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 1, 1},
+	{"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 0},
+	/* pcm3718 */
+	{"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
+};
+
+static struct comedi_driver driver_pcl818 = {
+	.driver_name	= "pcl818",
+	.module		= THIS_MODULE,
+	.attach		= pcl818_attach,
+	.detach		= pcl818_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl818_board),
+};
+
+static int __init driver_pcl818_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl818);
+}
+module_init(driver_pcl818_init_module);
+
+static void __exit driver_pcl818_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl818);
+}
+module_exit(driver_pcl818_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index f5c0bd17684c..88a354b6c0b5 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -62,10 +62,6 @@ Copy/pasted/hacked from pcm724.c
 #define CR_A_MODE(a)	((a)<<5)
 #define CR_CW		0x80
 
-static int pcm3724_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcm3724_detach(struct comedi_device *dev);
-
 struct pcm3724_board {
 	const char *name;	/*  driver name */
 	int dio;		/*  num of DIO */
@@ -80,36 +76,8 @@ struct priv_pcm3724 {
 	int dio_2;
 };
 
-static const struct pcm3724_board boardtypes[] = {
-	{"pcm3724", 48, 2, 0x00fc, PCM3724_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcm3724_board))
 #define this_board ((const struct pcm3724_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcm3724 = {
-	.driver_name = "pcm3724",
-	.module = THIS_MODULE,
-	.attach = pcm3724_attach,
-	.detach = pcm3724_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcm3724_board),
-};
-
-static int __init driver_pcm3724_init_module(void)
-{
-	return comedi_driver_register(&driver_pcm3724);
-}
-
-static void __exit driver_pcm3724_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcm3724);
-}
-
-module_init(driver_pcm3724_init_module);
-module_exit(driver_pcm3724_cleanup_module);
-
 /* (setq c-basic-offset 8) */
 
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
@@ -319,6 +287,32 @@ static int pcm3724_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcm3724_board boardtypes[] = {
+	{ "pcm3724", 48, 2, 0x00fc, PCM3724_SIZE, },
+};
+
+static struct comedi_driver driver_pcm3724 = {
+	.driver_name	= "pcm3724",
+	.module		= THIS_MODULE,
+	.attach		= pcm3724_attach,
+	.detach		= pcm3724_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcm3724_board),
+};
+
+static int __init driver_pcm3724_init_module(void)
+{
+	return comedi_driver_register(&driver_pcm3724);
+}
+module_init(driver_pcm3724_init_module);
+
+static void __exit driver_pcm3724_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcm3724);
+}
+module_exit(driver_pcm3724_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3730.c b/drivers/staging/comedi/drivers/pcm3730.c
index bada6b236ff1..342899348370 100644
--- a/drivers/staging/comedi/drivers/pcm3730.c
+++ b/drivers/staging/comedi/drivers/pcm3730.c
@@ -28,29 +28,6 @@ Configuration options:
 #define PCM3730_DIB 2
 #define PCM3730_DIC 3
 
-static int pcm3730_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcm3730_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcm3730 = {
-	.driver_name = "pcm3730",
-	.module = THIS_MODULE,
-	.attach = pcm3730_attach,
-	.detach = pcm3730_detach,
-};
-
-static int __init driver_pcm3730_init_module(void)
-{
-	return comedi_driver_register(&driver_pcm3730);
-}
-
-static void __exit driver_pcm3730_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcm3730);
-}
-
-module_init(driver_pcm3730_init_module);
-module_exit(driver_pcm3730_cleanup_module);
-
 static int pcm3730_do_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data)
@@ -166,6 +143,25 @@ static int pcm3730_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_pcm3730 = {
+	.driver_name	= "pcm3730",
+	.module		= THIS_MODULE,
+	.attach		= pcm3730_attach,
+	.detach		= pcm3730_detach,
+};
+
+static int __init driver_pcm3730_init_module(void)
+{
+	return comedi_driver_register(&driver_pcm3730);
+}
+module_init(driver_pcm3730_init_module);
+
+static void __exit driver_pcm3730_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcm3730);
+}
+module_exit(driver_pcm3730_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index 23b3d777340c..fe8ef664c1f4 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -57,19 +57,8 @@ struct pcmad_board_struct {
 	const char *name;
 	int n_ai_bits;
 };
-static const struct pcmad_board_struct pcmad_boards[] = {
-	{
-	 .name = "pcmad12",
-	 .n_ai_bits = 12,
-	 },
-	{
-	 .name = "pcmad16",
-	 .n_ai_bits = 16,
-	 },
-};
 
 #define this_board ((const struct pcmad_board_struct *)(dev->board_ptr))
-#define n_pcmad_boards ARRAY_SIZE(pcmad_boards)
 
 struct pcmad_priv_struct {
 	int differential;
@@ -77,31 +66,6 @@ struct pcmad_priv_struct {
 };
 #define devpriv ((struct pcmad_priv_struct *)dev->private)
 
-static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pcmad_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcmad = {
-	.driver_name = "pcmad",
-	.module = THIS_MODULE,
-	.attach = pcmad_attach,
-	.detach = pcmad_detach,
-	.board_name = &pcmad_boards[0].name,
-	.num_names = n_pcmad_boards,
-	.offset = sizeof(pcmad_boards[0]),
-};
-
-static int __init driver_pcmad_init_module(void)
-{
-	return comedi_driver_register(&driver_pcmad);
-}
-
-static void __exit driver_pcmad_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcmad);
-}
-
-module_init(driver_pcmad_init_module);
-module_exit(driver_pcmad_cleanup_module);
-
 #define TIMEOUT	100
 
 static int pcmad_ai_insn_read(struct comedi_device *dev,
@@ -188,6 +152,37 @@ static int pcmad_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct pcmad_board_struct pcmad_boards[] = {
+	{
+		.name		= "pcmad12",
+		.n_ai_bits	= 12,
+	}, {
+		.name		= "pcmad16",
+		.n_ai_bits	= 16,
+	},
+};
+static struct comedi_driver driver_pcmad = {
+	.driver_name	= "pcmad",
+	.module		= THIS_MODULE,
+	.attach		= pcmad_attach,
+	.detach		= pcmad_detach,
+	.board_name	= &pcmad_boards[0].name,
+	.num_names	= ARRAY_SIZE(pcmad_boards),
+	.offset		= sizeof(pcmad_boards[0]),
+};
+
+static int __init driver_pcmad_init_module(void)
+{
+	return comedi_driver_register(&driver_pcmad);
+}
+module_init(driver_pcmad_init_module);
+
+static void __exit driver_pcmad_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcmad);
+}
+module_exit(driver_pcmad_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 0e9ffa28d745..4846d984fb4e 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -80,12 +80,6 @@ static const struct comedi_lrange pcmda12_ranges = {
 	 }
 };
 
-static const struct pcmda12_board pcmda12_boards[] = {
-	{
-	 .name = "pcmda12",
-	 },
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -99,57 +93,77 @@ struct pcmda12_private {
 
 #define devpriv ((struct pcmda12_private *)(dev->private))
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmda12_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcmda12_detach(struct comedi_device *dev);
+static void zero_chans(struct comedi_device *dev)
+{				/* sets up an
+				   ASIC chip to defaults */
+	int i;
+	for (i = 0; i < CHANS; ++i) {
+/*      /\* do this as one instruction?? *\/ */
+/*      outw(0, LSB_PORT(chan)); */
+		outb(0, LSB_PORT(i));
+		outb(0, MSB_PORT(i));
+	}
+	inb(LSB_PORT(0));	/* update chans. */
+}
 
-static void zero_chans(struct comedi_device *dev);
+static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
+		    struct comedi_insn *insn, unsigned int *data)
+{
+	int i;
+	int chan = CR_CHAN(insn->chanspec);
 
-static struct comedi_driver driver = {
-	.driver_name = "pcmda12",
-	.module = THIS_MODULE,
-	.attach = pcmda12_attach,
-	.detach = pcmda12_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmda12_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmda12_boards[0].name,
-	.offset = sizeof(struct pcmda12_board),
-	.num_names = ARRAY_SIZE(pcmda12_boards),
-};
+	/* Writing a list of values to an AO channel is probably not
+	 * very useful, but that's how the interface is defined. */
+	for (i = 0; i < insn->n; ++i) {
 
-static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data);
+/*      /\* do this as one instruction?? *\/ */
+/*      outw(data[i], LSB_PORT(chan)); */
+
+		/* Need to do this as two instructions due to 8-bit bus?? */
+		/*  first, load the low byte */
+		outb(LSB(data[i]), LSB_PORT(chan));
+		/*  next, write the high byte */
+		outb(MSB(data[i]), MSB_PORT(chan));
+
+		/* save shadow register */
+		devpriv->ao_readback[chan] = data[i];
+
+		if (!devpriv->simultaneous_xfer_mode)
+			inb(LSB_PORT(chan));
+	}
+
+	/* return the number of samples written */
+	return i;
+}
+
+/* AO subdevices should have a read insn as well as a write insn.
+
+   Usually this means copying a value stored in devpriv->ao_readback.
+   However, since this driver supports simultaneous xfer then sometimes
+   this function actually accomplishes work.
+
+   Simultaneaous xfer mode is accomplished by loading ALL the values
+   you want for AO in all the channels, then READing off one of the AO
+   registers to initiate the instantaneous simultaneous update of all
+   DAC outputs, which makes all AO channels update simultaneously.
+   This is useful for some control applications, I would imagine.
+*/
 static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data);
+		    struct comedi_insn *insn, unsigned int *data)
+{
+	int i;
+	int chan = CR_CHAN(insn->chanspec);
+
+	for (i = 0; i < insn->n; i++) {
+		if (devpriv->simultaneous_xfer_mode)
+			inb(LSB_PORT(chan));
+		/* read back shadow register */
+		data[i] = devpriv->ao_readback[chan];
+	}
+
+	return i;
+}
 
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
 static int pcmda12_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -213,14 +227,6 @@ static int pcmda12_attach(struct comedi_device *dev,
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
 static int pcmda12_detach(struct comedi_device *dev)
 {
 	printk(KERN_INFO
@@ -230,92 +236,32 @@ static int pcmda12_detach(struct comedi_device *dev)
 	return 0;
 }
 
-static void zero_chans(struct comedi_device *dev)
-{				/* sets up an
-				   ASIC chip to defaults */
-	int i;
-	for (i = 0; i < CHANS; ++i) {
-/*      /\* do this as one instruction?? *\/ */
-/*      outw(0, LSB_PORT(chan)); */
-		outb(0, LSB_PORT(i));
-		outb(0, MSB_PORT(i));
-	}
-	inb(LSB_PORT(0));	/* update chans. */
-}
-
-static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data)
-{
-	int i;
-	int chan = CR_CHAN(insn->chanspec);
-
-	/* Writing a list of values to an AO channel is probably not
-	 * very useful, but that's how the interface is defined. */
-	for (i = 0; i < insn->n; ++i) {
-
-/*      /\* do this as one instruction?? *\/ */
-/*      outw(data[i], LSB_PORT(chan)); */
-
-		/* Need to do this as two instructions due to 8-bit bus?? */
-		/*  first, load the low byte */
-		outb(LSB(data[i]), LSB_PORT(chan));
-		/*  next, write the high byte */
-		outb(MSB(data[i]), MSB_PORT(chan));
-
-		/* save shadow register */
-		devpriv->ao_readback[chan] = data[i];
-
-		if (!devpriv->simultaneous_xfer_mode)
-			inb(LSB_PORT(chan));
-	}
-
-	/* return the number of samples written */
-	return i;
-}
-
-/* AO subdevices should have a read insn as well as a write insn.
-
-   Usually this means copying a value stored in devpriv->ao_readback.
-   However, since this driver supports simultaneous xfer then sometimes
-   this function actually accomplishes work.
-
-   Simultaneaous xfer mode is accomplished by loading ALL the values
-   you want for AO in all the channels, then READing off one of the AO
-   registers to initiate the instantaneous simultaneous update of all
-   DAC outputs, which makes all AO channels update simultaneously.
-   This is useful for some control applications, I would imagine.
-*/
-static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data)
-{
-	int i;
-	int chan = CR_CHAN(insn->chanspec);
-
-	for (i = 0; i < insn->n; i++) {
-		if (devpriv->simultaneous_xfer_mode)
-			inb(LSB_PORT(chan));
-		/* read back shadow register */
-		data[i] = devpriv->ao_readback[chan];
-	}
+static const struct pcmda12_board pcmda12_boards[] = {
+	{
+		.name	= "pcmda12",
+	},
+};
 
-	return i;
-}
+static struct comedi_driver driver = {
+	.driver_name	= "pcmda12",
+	.module		= THIS_MODULE,
+	.attach		= pcmda12_attach,
+	.detach		= pcmda12_detach,
+	.board_name	= &pcmda12_boards[0].name,
+	.offset		= sizeof(struct pcmda12_board),
+	.num_names	= ARRAY_SIZE(pcmda12_boards),
+};
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
 static int __init driver_init_module(void)
 {
 	return comedi_driver_register(&driver);
 }
+module_init(driver_init_module);
 
 static void __exit driver_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver);
 }
-
-module_init(driver_init_module);
 module_exit(driver_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index eddac00e4e29..d7f98d575f45 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -145,13 +145,6 @@ Configuration Options:
 #define PAGE_ENAB 2
 #define PAGE_INT_ID 3
 
-static int ai_rinsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-static int ao_rinsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-static int ao_winsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-
 /*
  * Board descriptions for two imaginary boards.  Describing the
  * boards in this way is optional, and completely driver-dependent.
@@ -190,23 +183,6 @@ static const struct comedi_lrange ranges_ao = {
 	  RANGE(-2.5, 2.5), RANGE(-2.5, 7.5)}
 };
 
-static const struct pcmmio_board pcmmio_boards[] = {
-	{
-	 .name = "pcmmio",
-	 .dio_num_asics = 1,
-	 .dio_num_ports = 6,
-	 .total_iosize = 32,
-	 .ai_bits = 16,
-	 .ao_bits = 16,
-	 .n_ai_chans = 16,
-	 .n_ao_chans = 8,
-	 .ai_range_table = &ranges_ai,
-	 .ao_range_table = &ranges_ao,
-	 .ai_rinsn = ai_rinsn,
-	 .ao_rinsn = ao_rinsn,
-	 .ao_winsn = ao_winsn},
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -293,312 +269,6 @@ struct pcmmio_private {
  */
 #define devpriv ((struct pcmmio_private *)dev->private)
 #define subpriv ((struct pcmmio_subdev_private *)s->private)
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmmio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcmmio_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver = {
-	.driver_name = "pcmmio",
-	.module = THIS_MODULE,
-	.attach = pcmmio_attach,
-	.detach = pcmmio_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmmio_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmmio_boards[0].name,
-	.offset = sizeof(struct pcmmio_board),
-	.num_names = ARRAY_SIZE(pcmmio_boards),
-};
-
-static int pcmmio_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int pcmmio_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static irqreturn_t interrupt_pcmmio(int irq, void *d);
-static void pcmmio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmmio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
-
-/* some helper functions to deal with specifics of this device's registers */
-/* sets up/clears ASIC chips to defaults */
-static void init_asics(struct comedi_device *dev);
-static void switch_page(struct comedi_device *dev, int asic, int page);
-#ifdef notused
-static void lock_port(struct comedi_device *dev, int asic, int port);
-static void unlock_port(struct comedi_device *dev, int asic, int port);
-#endif
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
-	    thisasic_chanct = 0;
-	unsigned long iobase;
-	unsigned int irq[MAX_ASICS];
-
-	iobase = it->options[0];
-	irq[0] = it->options[1];
-
-	printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
-			driver.driver_name, iobase);
-
-	dev->iobase = iobase;
-
-	if (!iobase || !request_region(iobase,
-				       thisboard->total_iosize,
-				       driver.driver_name)) {
-		printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
-		return -EIO;
-	}
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
-		printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-
-	for (asic = 0; asic < MAX_ASICS; ++asic) {
-		devpriv->asics[asic].num = asic;
-		devpriv->asics[asic].iobase =
-		    dev->iobase + 16 + asic * ASIC_IOSIZE;
-		/*
-		 * this gets actually set at the end of this function when we
-		 * request_irqs
-		 */
-		devpriv->asics[asic].irq = 0;
-		spin_lock_init(&devpriv->asics[asic].spinlock);
-	}
-
-	chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics;
-	n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left);
-	n_subdevs = n_dio_subdevs + 2;
-	devpriv->sprivs =
-	    kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private),
-		    GFP_KERNEL);
-	if (!devpriv->sprivs) {
-		printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 *
-	 * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO)
-	 */
-	if (alloc_subdevices(dev, n_subdevs) < 0) {
-		printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-
-	/* First, AI */
-	sdev_no = 0;
-	s = dev->subdevices + sdev_no;
-	s->private = devpriv->sprivs + sdev_no;
-	s->maxdata = (1 << thisboard->ai_bits) - 1;
-	s->range_table = thisboard->ai_range_table;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
-	s->type = COMEDI_SUBD_AI;
-	s->n_chan = thisboard->n_ai_chans;
-	s->len_chanlist = s->n_chan;
-	s->insn_read = thisboard->ai_rinsn;
-	subpriv->iobase = dev->iobase + 0;
-	/* initialize the resource enable register by clearing it */
-	outb(0, subpriv->iobase + 3);
-	outb(0, subpriv->iobase + 4 + 3);
-
-	/* Next, AO */
-	++sdev_no;
-	s = dev->subdevices + sdev_no;
-	s->private = devpriv->sprivs + sdev_no;
-	s->maxdata = (1 << thisboard->ao_bits) - 1;
-	s->range_table = thisboard->ao_range_table;
-	s->subdev_flags = SDF_READABLE;
-	s->type = COMEDI_SUBD_AO;
-	s->n_chan = thisboard->n_ao_chans;
-	s->len_chanlist = s->n_chan;
-	s->insn_read = thisboard->ao_rinsn;
-	s->insn_write = thisboard->ao_winsn;
-	subpriv->iobase = dev->iobase + 8;
-	/* initialize the resource enable register by clearing it */
-	outb(0, subpriv->iobase + 3);
-	outb(0, subpriv->iobase + 4 + 3);
-
-	++sdev_no;
-	port = 0;
-	asic = 0;
-	for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
-		int byte_no;
-
-		s = dev->subdevices + sdev_no;
-		s->private = devpriv->sprivs + sdev_no;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->type = COMEDI_SUBD_DIO;
-		s->insn_bits = pcmmio_dio_insn_bits;
-		s->insn_config = pcmmio_dio_insn_config;
-		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
-		subpriv->dio.intr.asic = -1;
-		subpriv->dio.intr.first_chan = -1;
-		subpriv->dio.intr.asic_chan = -1;
-		subpriv->dio.intr.num_asic_chans = -1;
-		subpriv->dio.intr.active = 0;
-		s->len_chanlist = 1;
-
-		/* save the ioport address for each 'port' of 8 channels in the
-		   subdevice */
-		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
-			if (port >= PORTS_PER_ASIC) {
-				port = 0;
-				++asic;
-				thisasic_chanct = 0;
-			}
-			subpriv->iobases[byte_no] =
-			    devpriv->asics[asic].iobase + port;
-
-			if (thisasic_chanct <
-			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
-			    && subpriv->dio.intr.asic < 0) {
-				/*
-				 * this is an interrupt subdevice,
-				 * so setup the struct
-				 */
-				subpriv->dio.intr.asic = asic;
-				subpriv->dio.intr.active = 0;
-				subpriv->dio.intr.stop_count = 0;
-				subpriv->dio.intr.first_chan = byte_no * 8;
-				subpriv->dio.intr.asic_chan = thisasic_chanct;
-				subpriv->dio.intr.num_asic_chans =
-				    s->n_chan - subpriv->dio.intr.first_chan;
-				s->cancel = pcmmio_cancel;
-				s->do_cmd = pcmmio_cmd;
-				s->do_cmdtest = pcmmio_cmdtest;
-				s->len_chanlist =
-				    subpriv->dio.intr.num_asic_chans;
-			}
-			thisasic_chanct += CHANS_PER_PORT;
-		}
-		spin_lock_init(&subpriv->dio.intr.spinlock);
-
-		chans_left -= s->n_chan;
-
-		if (!chans_left) {
-			/*
-			 * reset the asic to our first asic,
-			 * to do intr subdevs
-			 */
-			asic = 0;
-			port = 0;
-		}
-
-	}
-
-	init_asics(dev);	/* clear out all the registers, basically */
-
-	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
-		if (irq[asic]
-		    && request_irq(irq[asic], interrupt_pcmmio,
-				   IRQF_SHARED, thisboard->name, dev)) {
-			int i;
-			/* unroll the allocated irqs.. */
-			for (i = asic - 1; i >= 0; --i) {
-				free_irq(irq[i], dev);
-				devpriv->asics[i].irq = irq[i] = 0;
-			}
-			irq[asic] = 0;
-		}
-		devpriv->asics[asic].irq = irq[asic];
-	}
-
-	dev->irq = irq[0];	/*
-				 * grr.. wish comedi dev struct supported
-				 * multiple irqs..
-				 */
-
-	if (irq[0]) {
-		printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]);
-		if (thisboard->dio_num_asics == 2 && irq[1])
-			printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n",
-					dev->minor, irq[1]);
-	} else {
-		printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor);
-	}
-
-	printk(KERN_INFO "comedi%d: attached\n", dev->minor);
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcmmio_detach(struct comedi_device *dev)
-{
-	int i;
-
-	printk(KERN_INFO "comedi%d: %s: remove\n", dev->minor, driver.driver_name);
-	if (dev->iobase)
-		release_region(dev->iobase, thisboard->total_iosize);
-
-	for (i = 0; i < MAX_ASICS; ++i) {
-		if (devpriv && devpriv->asics[i].irq)
-			free_irq(devpriv->asics[i].irq, dev);
-	}
-
-	if (devpriv && devpriv->sprivs)
-		kfree(devpriv->sprivs);
-
-	return 0;
-}
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -667,7 +337,7 @@ static int pcmmio_dio_insn_bits(struct comedi_device *dev,
 		}
 #ifdef DAMMIT_ITS_BROKEN
 		/* DEBUG */
-		printk("data_out_byte %02x\n", (unsigned)byte);
+		printk(KERN_DEBUG "data_out_byte %02x\n", (unsigned)byte);
 #endif
 		/* save the digital input lines for this byte.. */
 		s->state |= ((unsigned int)byte) << offset;
@@ -751,6 +421,21 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
+static void switch_page(struct comedi_device *dev, int asic, int page)
+{
+	if (asic < 0 || asic >= thisboard->dio_num_asics)
+		return;		/* paranoia */
+	if (page < 0 || page >= NUM_PAGES)
+		return;		/* more paranoia */
+
+	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
+	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
+
+	/* now write out the shadow register */
+	outb(devpriv->asics[asic].pagelock,
+	     devpriv->asics[asic].iobase + REG_PAGELOCK);
+}
+
 static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
@@ -788,21 +473,6 @@ static void init_asics(struct comedi_device *dev)
 	}
 }
 
-static void switch_page(struct comedi_device *dev, int asic, int page)
-{
-	if (asic < 0 || asic >= thisboard->dio_num_asics)
-		return;		/* paranoia */
-	if (page < 0 || page >= NUM_PAGES)
-		return;		/* more paranoia */
-
-	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
-	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
-
-	/* now write out the shadow register */
-	outb(devpriv->asics[asic].pagelock,
-	     devpriv->asics[asic].iobase + REG_PAGELOCK);
-}
-
 #ifdef notused
 static void lock_port(struct comedi_device *dev, int asic, int port)
 {
@@ -831,6 +501,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port)
 }
 #endif /* notused */
 
+static void pcmmio_stop_intr(struct comedi_device *dev,
+			     struct comedi_subdevice *s)
+{
+	int nports, firstport, asic, port;
+
+	asic = subpriv->dio.intr.asic;
+	if (asic < 0)
+		return;		/* not an interrupt subdev */
+
+	subpriv->dio.intr.enabled_mask = 0;
+	subpriv->dio.intr.active = 0;
+	s->async->inttrig = 0;
+	nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT;
+	firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT;
+	switch_page(dev, asic, PAGE_ENAB);
+	for (port = firstport; port < firstport + nports; ++port) {
+		/* disable all intrs for this subdev.. */
+		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
+	}
+}
+
 static irqreturn_t interrupt_pcmmio(int irq, void *d)
 {
 	int asic, got1 = 0;
@@ -991,27 +682,6 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static void pcmmio_stop_intr(struct comedi_device *dev,
-			     struct comedi_subdevice *s)
-{
-	int nports, firstport, asic, port;
-
-	asic = subpriv->dio.intr.asic;
-	if (asic < 0)
-		return;		/* not an interrupt subdev */
-
-	subpriv->dio.intr.enabled_mask = 0;
-	subpriv->dio.intr.active = 0;
-	s->async->inttrig = 0;
-	nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT;
-	firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT;
-	switch_page(dev, asic, PAGE_ENAB);
-	for (port = firstport; port < firstport + nports; ++port) {
-		/* disable all intrs for this subdev.. */
-		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
-	}
-}
-
 static int pcmmio_start_intr(struct comedi_device *dev,
 			     struct comedi_subdevice *s)
 {
@@ -1340,21 +1010,276 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return n;
 }
 
+static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
+	    thisasic_chanct = 0;
+	unsigned long iobase;
+	unsigned int irq[MAX_ASICS];
+
+	iobase = it->options[0];
+	irq[0] = it->options[1];
+
+	printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
+			driver.driver_name, iobase);
+
+	dev->iobase = iobase;
+
+	if (!iobase || !request_region(iobase,
+				       thisboard->total_iosize,
+				       driver.driver_name)) {
+		printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
+		return -EIO;
+	}
+
+/*
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
+ */
+	dev->board_name = thisboard->name;
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
  */
+	if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
+		printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+
+	for (asic = 0; asic < MAX_ASICS; ++asic) {
+		devpriv->asics[asic].num = asic;
+		devpriv->asics[asic].iobase =
+		    dev->iobase + 16 + asic * ASIC_IOSIZE;
+		/*
+		 * this gets actually set at the end of this function when we
+		 * request_irqs
+		 */
+		devpriv->asics[asic].irq = 0;
+		spin_lock_init(&devpriv->asics[asic].spinlock);
+	}
+
+	chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics;
+	n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left);
+	n_subdevs = n_dio_subdevs + 2;
+	devpriv->sprivs =
+	    kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private),
+		    GFP_KERNEL);
+	if (!devpriv->sprivs) {
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 *
+	 * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO)
+	 */
+	if (alloc_subdevices(dev, n_subdevs) < 0) {
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+
+	/* First, AI */
+	sdev_no = 0;
+	s = dev->subdevices + sdev_no;
+	s->private = devpriv->sprivs + sdev_no;
+	s->maxdata = (1 << thisboard->ai_bits) - 1;
+	s->range_table = thisboard->ai_range_table;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
+	s->type = COMEDI_SUBD_AI;
+	s->n_chan = thisboard->n_ai_chans;
+	s->len_chanlist = s->n_chan;
+	s->insn_read = thisboard->ai_rinsn;
+	subpriv->iobase = dev->iobase + 0;
+	/* initialize the resource enable register by clearing it */
+	outb(0, subpriv->iobase + 3);
+	outb(0, subpriv->iobase + 4 + 3);
+
+	/* Next, AO */
+	++sdev_no;
+	s = dev->subdevices + sdev_no;
+	s->private = devpriv->sprivs + sdev_no;
+	s->maxdata = (1 << thisboard->ao_bits) - 1;
+	s->range_table = thisboard->ao_range_table;
+	s->subdev_flags = SDF_READABLE;
+	s->type = COMEDI_SUBD_AO;
+	s->n_chan = thisboard->n_ao_chans;
+	s->len_chanlist = s->n_chan;
+	s->insn_read = thisboard->ao_rinsn;
+	s->insn_write = thisboard->ao_winsn;
+	subpriv->iobase = dev->iobase + 8;
+	/* initialize the resource enable register by clearing it */
+	outb(0, subpriv->iobase + 3);
+	outb(0, subpriv->iobase + 4 + 3);
+
+	++sdev_no;
+	port = 0;
+	asic = 0;
+	for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
+		int byte_no;
+
+		s = dev->subdevices + sdev_no;
+		s->private = devpriv->sprivs + sdev_no;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->type = COMEDI_SUBD_DIO;
+		s->insn_bits = pcmmio_dio_insn_bits;
+		s->insn_config = pcmmio_dio_insn_config;
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
+		subpriv->dio.intr.asic = -1;
+		subpriv->dio.intr.first_chan = -1;
+		subpriv->dio.intr.asic_chan = -1;
+		subpriv->dio.intr.num_asic_chans = -1;
+		subpriv->dio.intr.active = 0;
+		s->len_chanlist = 1;
+
+		/* save the ioport address for each 'port' of 8 channels in the
+		   subdevice */
+		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
+			if (port >= PORTS_PER_ASIC) {
+				port = 0;
+				++asic;
+				thisasic_chanct = 0;
+			}
+			subpriv->iobases[byte_no] =
+			    devpriv->asics[asic].iobase + port;
+
+			if (thisasic_chanct <
+			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
+			    && subpriv->dio.intr.asic < 0) {
+				/*
+				 * this is an interrupt subdevice,
+				 * so setup the struct
+				 */
+				subpriv->dio.intr.asic = asic;
+				subpriv->dio.intr.active = 0;
+				subpriv->dio.intr.stop_count = 0;
+				subpriv->dio.intr.first_chan = byte_no * 8;
+				subpriv->dio.intr.asic_chan = thisasic_chanct;
+				subpriv->dio.intr.num_asic_chans =
+				    s->n_chan - subpriv->dio.intr.first_chan;
+				s->cancel = pcmmio_cancel;
+				s->do_cmd = pcmmio_cmd;
+				s->do_cmdtest = pcmmio_cmdtest;
+				s->len_chanlist =
+				    subpriv->dio.intr.num_asic_chans;
+			}
+			thisasic_chanct += CHANS_PER_PORT;
+		}
+		spin_lock_init(&subpriv->dio.intr.spinlock);
+
+		chans_left -= s->n_chan;
+
+		if (!chans_left) {
+			/*
+			 * reset the asic to our first asic,
+			 * to do intr subdevs
+			 */
+			asic = 0;
+			port = 0;
+		}
+
+	}
+
+	init_asics(dev);	/* clear out all the registers, basically */
+
+	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
+		if (irq[asic]
+		    && request_irq(irq[asic], interrupt_pcmmio,
+				   IRQF_SHARED, thisboard->name, dev)) {
+			int i;
+			/* unroll the allocated irqs.. */
+			for (i = asic - 1; i >= 0; --i) {
+				free_irq(irq[i], dev);
+				devpriv->asics[i].irq = irq[i] = 0;
+			}
+			irq[asic] = 0;
+		}
+		devpriv->asics[asic].irq = irq[asic];
+	}
+
+	dev->irq = irq[0];	/*
+				 * grr.. wish comedi dev struct supported
+				 * multiple irqs..
+				 */
+
+	if (irq[0]) {
+		printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]);
+		if (thisboard->dio_num_asics == 2 && irq[1])
+			printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n",
+					dev->minor, irq[1]);
+	} else {
+		printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor);
+	}
+
+	printk(KERN_INFO "comedi%d: attached\n", dev->minor);
+
+	return 1;
+}
+
+static int pcmmio_detach(struct comedi_device *dev)
+{
+	int i;
+
+	printk(KERN_INFO "comedi%d: %s: remove\n", dev->minor, driver.driver_name);
+	if (dev->iobase)
+		release_region(dev->iobase, thisboard->total_iosize);
+
+	for (i = 0; i < MAX_ASICS; ++i) {
+		if (devpriv && devpriv->asics[i].irq)
+			free_irq(devpriv->asics[i].irq, dev);
+	}
+
+	if (devpriv && devpriv->sprivs)
+		kfree(devpriv->sprivs);
+
+	return 0;
+}
+
+static const struct pcmmio_board pcmmio_boards[] = {
+	{
+		.name		= "pcmmio",
+		.dio_num_asics	= 1,
+		.dio_num_ports	= 6,
+		.total_iosize	= 32,
+		.ai_bits	= 16,
+		.ao_bits	= 16,
+		.n_ai_chans	= 16,
+		.n_ao_chans	= 8,
+		.ai_range_table	= &ranges_ai,
+		.ao_range_table	= &ranges_ao,
+		.ai_rinsn	= ai_rinsn,
+		.ao_rinsn	= ao_rinsn,
+		.ao_winsn	= ao_winsn
+	},
+};
+
+static struct comedi_driver driver = {
+	.driver_name	= "pcmmio",
+	.module		= THIS_MODULE,
+	.attach		= pcmmio_attach,
+	.detach		= pcmmio_detach,
+	.board_name	= &pcmmio_boards[0].name,
+	.offset		= sizeof(struct pcmmio_board),
+	.num_names	= ARRAY_SIZE(pcmmio_boards),
+};
+
 static int __init driver_init_module(void)
 {
 	return comedi_driver_register(&driver);
 }
+module_init(driver_init_module);
 
 static void __exit driver_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver);
 }
-
-module_init(driver_init_module);
 module_exit(driver_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 661ba2e03892..de4f4865bef1 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -155,19 +155,6 @@ struct pcmuio_board {
 	const int num_ports;
 };
 
-static const struct pcmuio_board pcmuio_boards[] = {
-	{
-	 .name = "pcmuio48",
-	 .num_asics = 1,
-	 .num_ports = 6,
-	 },
-	{
-	 .name = "pcmuio96",
-	 .num_asics = 2,
-	 .num_ports = 12,
-	 },
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -218,262 +205,6 @@ struct pcmuio_private {
  */
 #define devpriv ((struct pcmuio_private *)dev->private)
 #define subpriv ((struct pcmuio_subdev_private *)s->private)
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmuio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcmuio_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver = {
-	.driver_name = "pcmuio",
-	.module = THIS_MODULE,
-	.attach = pcmuio_attach,
-	.detach = pcmuio_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmuio_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmuio_boards[0].name,
-	.offset = sizeof(struct pcmuio_board),
-	.num_names = ARRAY_SIZE(pcmuio_boards),
-};
-
-static int pcmuio_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int pcmuio_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static irqreturn_t interrupt_pcmuio(int irq, void *d);
-static void pcmuio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
-
-/* some helper functions to deal with specifics of this device's registers */
-static void init_asics(struct comedi_device *dev);	/* sets up/clears ASIC chips to defaults */
-static void switch_page(struct comedi_device *dev, int asic, int page);
-#ifdef notused
-static void lock_port(struct comedi_device *dev, int asic, int port);
-static void unlock_port(struct comedi_device *dev, int asic, int port);
-#endif
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
-	unsigned long iobase;
-	unsigned int irq[MAX_ASICS];
-
-	iobase = it->options[0];
-	irq[0] = it->options[1];
-	irq[1] = it->options[2];
-
-	dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor,
-		driver.driver_name, iobase);
-
-	dev->iobase = iobase;
-
-	if (!iobase || !request_region(iobase,
-				       thisboard->num_asics * ASIC_IOSIZE,
-				       driver.driver_name)) {
-		dev_err(dev->hw_dev, "I/O port conflict\n");
-		return -EIO;
-	}
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) {
-		dev_warn(dev->hw_dev, "cannot allocate private data structure\n");
-		return -ENOMEM;
-	}
-
-	for (asic = 0; asic < MAX_ASICS; ++asic) {
-		devpriv->asics[asic].num = asic;
-		devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
-		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
-						   this function when we
-						   request_irqs */
-		spin_lock_init(&devpriv->asics[asic].spinlock);
-	}
-
-	chans_left = CHANS_PER_ASIC * thisboard->num_asics;
-	n_subdevs = CALC_N_SUBDEVS(chans_left);
-	devpriv->sprivs =
-	    kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private),
-		    GFP_KERNEL);
-	if (!devpriv->sprivs) {
-		dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n");
-		return -ENOMEM;
-	}
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 *
-	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
-	 * 96-channel version of the board.
-	 */
-	if (alloc_subdevices(dev, n_subdevs) < 0) {
-		dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n");
-		return -ENOMEM;
-	}
-
-	port = 0;
-	asic = 0;
-	for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
-		int byte_no;
-
-		s = dev->subdevices + sdev_no;
-		s->private = devpriv->sprivs + sdev_no;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->type = COMEDI_SUBD_DIO;
-		s->insn_bits = pcmuio_dio_insn_bits;
-		s->insn_config = pcmuio_dio_insn_config;
-		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
-		subpriv->intr.asic = -1;
-		subpriv->intr.first_chan = -1;
-		subpriv->intr.asic_chan = -1;
-		subpriv->intr.num_asic_chans = -1;
-		subpriv->intr.active = 0;
-		s->len_chanlist = 1;
-
-		/* save the ioport address for each 'port' of 8 channels in the
-		   subdevice */
-		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
-			if (port >= PORTS_PER_ASIC) {
-				port = 0;
-				++asic;
-				thisasic_chanct = 0;
-			}
-			subpriv->iobases[byte_no] =
-			    devpriv->asics[asic].iobase + port;
-
-			if (thisasic_chanct <
-			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
-			    && subpriv->intr.asic < 0) {
-				/* this is an interrupt subdevice, so setup the struct */
-				subpriv->intr.asic = asic;
-				subpriv->intr.active = 0;
-				subpriv->intr.stop_count = 0;
-				subpriv->intr.first_chan = byte_no * 8;
-				subpriv->intr.asic_chan = thisasic_chanct;
-				subpriv->intr.num_asic_chans =
-				    s->n_chan - subpriv->intr.first_chan;
-				dev->read_subdev = s;
-				s->subdev_flags |= SDF_CMD_READ;
-				s->cancel = pcmuio_cancel;
-				s->do_cmd = pcmuio_cmd;
-				s->do_cmdtest = pcmuio_cmdtest;
-				s->len_chanlist = subpriv->intr.num_asic_chans;
-			}
-			thisasic_chanct += CHANS_PER_PORT;
-		}
-		spin_lock_init(&subpriv->intr.spinlock);
-
-		chans_left -= s->n_chan;
-
-		if (!chans_left) {
-			asic = 0;	/* reset the asic to our first asic, to do intr subdevs */
-			port = 0;
-		}
-
-	}
-
-	init_asics(dev);	/* clear out all the registers, basically */
-
-	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
-		if (irq[asic]
-		    && request_irq(irq[asic], interrupt_pcmuio,
-				   IRQF_SHARED, thisboard->name, dev)) {
-			int i;
-			/* unroll the allocated irqs.. */
-			for (i = asic - 1; i >= 0; --i) {
-				free_irq(irq[i], dev);
-				devpriv->asics[i].irq = irq[i] = 0;
-			}
-			irq[asic] = 0;
-		}
-		devpriv->asics[asic].irq = irq[asic];
-	}
-
-	dev->irq = irq[0];	/* grr.. wish comedi dev struct supported multiple
-				   irqs.. */
-
-	if (irq[0]) {
-		dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]);
-		if (irq[1] && thisboard->num_asics == 2)
-			dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]);
-	} else {
-		dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n");
-	}
-
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcmuio_detach(struct comedi_device *dev)
-{
-	int i;
-
-	dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor,
-		driver.driver_name);
-	if (dev->iobase)
-		release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics);
-
-	for (i = 0; i < MAX_ASICS; ++i) {
-		if (devpriv->asics[i].irq)
-			free_irq(devpriv->asics[i].irq, dev);
-	}
-
-	if (devpriv && devpriv->sprivs)
-		kfree(devpriv->sprivs);
-
-	return 0;
-}
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -621,6 +352,21 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
+static void switch_page(struct comedi_device *dev, int asic, int page)
+{
+	if (asic < 0 || asic >= thisboard->num_asics)
+		return;		/* paranoia */
+	if (page < 0 || page >= NUM_PAGES)
+		return;		/* more paranoia */
+
+	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
+	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
+
+	/* now write out the shadow register */
+	outb(devpriv->asics[asic].pagelock,
+	     dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
+}
+
 static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
@@ -658,21 +404,6 @@ static void init_asics(struct comedi_device *dev)
 	}
 }
 
-static void switch_page(struct comedi_device *dev, int asic, int page)
-{
-	if (asic < 0 || asic >= thisboard->num_asics)
-		return;		/* paranoia */
-	if (page < 0 || page >= NUM_PAGES)
-		return;		/* more paranoia */
-
-	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
-	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
-
-	/* now write out the shadow register */
-	outb(devpriv->asics[asic].pagelock,
-	     dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
-}
-
 #ifdef notused
 static void lock_port(struct comedi_device *dev, int asic, int port)
 {
@@ -700,6 +431,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port)
 }
 #endif /* notused */
 
+static void pcmuio_stop_intr(struct comedi_device *dev,
+			     struct comedi_subdevice *s)
+{
+	int nports, firstport, asic, port;
+
+	asic = subpriv->intr.asic;
+	if (asic < 0)
+		return;		/* not an interrupt subdev */
+
+	subpriv->intr.enabled_mask = 0;
+	subpriv->intr.active = 0;
+	s->async->inttrig = 0;
+	nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT;
+	firstport = subpriv->intr.asic_chan / CHANS_PER_PORT;
+	switch_page(dev, asic, PAGE_ENAB);
+	for (port = firstport; port < firstport + nports; ++port) {
+		/* disable all intrs for this subdev.. */
+		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
+	}
+}
+
 static irqreturn_t interrupt_pcmuio(int irq, void *d)
 {
 	int asic, got1 = 0;
@@ -852,27 +604,6 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static void pcmuio_stop_intr(struct comedi_device *dev,
-			     struct comedi_subdevice *s)
-{
-	int nports, firstport, asic, port;
-
-	asic = subpriv->intr.asic;
-	if (asic < 0)
-		return;		/* not an interrupt subdev */
-
-	subpriv->intr.enabled_mask = 0;
-	subpriv->intr.active = 0;
-	s->async->inttrig = 0;
-	nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT;
-	firstport = subpriv->intr.asic_chan / CHANS_PER_PORT;
-	switch_page(dev, asic, PAGE_ENAB);
-	for (port = firstport; port < firstport + nports; ++port) {
-		/* disable all intrs for this subdev.. */
-		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
-	}
-}
-
 static int pcmuio_start_intr(struct comedi_device *dev,
 			     struct comedi_subdevice *s)
 {
@@ -1014,21 +745,221 @@ pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 	return comedi_pcm_cmdtest(dev, s, cmd);
 }
 
+static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
+	unsigned long iobase;
+	unsigned int irq[MAX_ASICS];
+
+	iobase = it->options[0];
+	irq[0] = it->options[1];
+	irq[1] = it->options[2];
+
+	dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor,
+		driver.driver_name, iobase);
+
+	dev->iobase = iobase;
+
+	if (!iobase || !request_region(iobase,
+				       thisboard->num_asics * ASIC_IOSIZE,
+				       driver.driver_name)) {
+		dev_err(dev->hw_dev, "I/O port conflict\n");
+		return -EIO;
+	}
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
+ */
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
  */
+	if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) {
+		dev_warn(dev->hw_dev, "cannot allocate private data structure\n");
+		return -ENOMEM;
+	}
+
+	for (asic = 0; asic < MAX_ASICS; ++asic) {
+		devpriv->asics[asic].num = asic;
+		devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
+		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
+						   this function when we
+						   request_irqs */
+		spin_lock_init(&devpriv->asics[asic].spinlock);
+	}
+
+	chans_left = CHANS_PER_ASIC * thisboard->num_asics;
+	n_subdevs = CALC_N_SUBDEVS(chans_left);
+	devpriv->sprivs =
+	    kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private),
+		    GFP_KERNEL);
+	if (!devpriv->sprivs) {
+		dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n");
+		return -ENOMEM;
+	}
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 *
+	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
+	 * 96-channel version of the board.
+	 */
+	if (alloc_subdevices(dev, n_subdevs) < 0) {
+		dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n");
+		return -ENOMEM;
+	}
+
+	port = 0;
+	asic = 0;
+	for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
+		int byte_no;
+
+		s = dev->subdevices + sdev_no;
+		s->private = devpriv->sprivs + sdev_no;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->type = COMEDI_SUBD_DIO;
+		s->insn_bits = pcmuio_dio_insn_bits;
+		s->insn_config = pcmuio_dio_insn_config;
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
+		subpriv->intr.asic = -1;
+		subpriv->intr.first_chan = -1;
+		subpriv->intr.asic_chan = -1;
+		subpriv->intr.num_asic_chans = -1;
+		subpriv->intr.active = 0;
+		s->len_chanlist = 1;
+
+		/* save the ioport address for each 'port' of 8 channels in the
+		   subdevice */
+		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
+			if (port >= PORTS_PER_ASIC) {
+				port = 0;
+				++asic;
+				thisasic_chanct = 0;
+			}
+			subpriv->iobases[byte_no] =
+			    devpriv->asics[asic].iobase + port;
+
+			if (thisasic_chanct <
+			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
+			    && subpriv->intr.asic < 0) {
+				/* this is an interrupt subdevice, so setup the struct */
+				subpriv->intr.asic = asic;
+				subpriv->intr.active = 0;
+				subpriv->intr.stop_count = 0;
+				subpriv->intr.first_chan = byte_no * 8;
+				subpriv->intr.asic_chan = thisasic_chanct;
+				subpriv->intr.num_asic_chans =
+				    s->n_chan - subpriv->intr.first_chan;
+				dev->read_subdev = s;
+				s->subdev_flags |= SDF_CMD_READ;
+				s->cancel = pcmuio_cancel;
+				s->do_cmd = pcmuio_cmd;
+				s->do_cmdtest = pcmuio_cmdtest;
+				s->len_chanlist = subpriv->intr.num_asic_chans;
+			}
+			thisasic_chanct += CHANS_PER_PORT;
+		}
+		spin_lock_init(&subpriv->intr.spinlock);
+
+		chans_left -= s->n_chan;
+
+		if (!chans_left) {
+			asic = 0;	/* reset the asic to our first asic, to do intr subdevs */
+			port = 0;
+		}
+
+	}
+
+	init_asics(dev);	/* clear out all the registers, basically */
+
+	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
+		if (irq[asic]
+		    && request_irq(irq[asic], interrupt_pcmuio,
+				   IRQF_SHARED, thisboard->name, dev)) {
+			int i;
+			/* unroll the allocated irqs.. */
+			for (i = asic - 1; i >= 0; --i) {
+				free_irq(irq[i], dev);
+				devpriv->asics[i].irq = irq[i] = 0;
+			}
+			irq[asic] = 0;
+		}
+		devpriv->asics[asic].irq = irq[asic];
+	}
+
+	dev->irq = irq[0];	/* grr.. wish comedi dev struct supported multiple
+				   irqs.. */
+
+	if (irq[0]) {
+		dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]);
+		if (irq[1] && thisboard->num_asics == 2)
+			dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]);
+	} else {
+		dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n");
+	}
+
+
+	return 1;
+}
+
+static int pcmuio_detach(struct comedi_device *dev)
+{
+	int i;
+
+	dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor,
+		driver.driver_name);
+	if (dev->iobase)
+		release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics);
+
+	for (i = 0; i < MAX_ASICS; ++i) {
+		if (devpriv->asics[i].irq)
+			free_irq(devpriv->asics[i].irq, dev);
+	}
+
+	if (devpriv && devpriv->sprivs)
+		kfree(devpriv->sprivs);
+
+	return 0;
+}
+
+static const struct pcmuio_board pcmuio_boards[] = {
+	{
+		.name		= "pcmuio48",
+		.num_asics	= 1,
+		.num_ports	= 6,
+	}, {
+		.name		= "pcmuio96",
+		.num_asics	= 2,
+		.num_ports	= 12,
+	},
+};
+
+static struct comedi_driver driver = {
+	.driver_name	= "pcmuio",
+	.module		= THIS_MODULE,
+	.attach		= pcmuio_attach,
+	.detach		= pcmuio_detach,
+	.board_name	= &pcmuio_boards[0].name,
+	.offset		= sizeof(struct pcmuio_board),
+	.num_names	= ARRAY_SIZE(pcmuio_boards),
+};
+
 static int __init driver_init_module(void)
 {
 	return comedi_driver_register(&driver);
 }
+module_init(driver_init_module);
 
 static void __exit driver_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver);
 }
-
-module_init(driver_init_module);
 module_exit(driver_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index 831a576c24aa..e3690bbd201a 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -41,20 +41,6 @@ Configuration options:
 
 #include <linux/ioport.h>
 
-static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int poc_detach(struct comedi_device *dev);
-static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-
-static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int pcl733_insn_bits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int pcl734_insn_bits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-
 struct boarddef_struct {
 	const char *name;
 	unsigned int iosize;
@@ -70,108 +56,9 @@ struct boarddef_struct {
 			 struct comedi_insn *, unsigned int *);
 	const struct comedi_lrange *range;
 };
-static const struct boarddef_struct boards[] = {
-	{
-	 .name = "dac02",
-	 .iosize = 8,
-	 /*      .setup = dac02_setup, */
-	 .type = COMEDI_SUBD_AO,
-	 .n_chan = 2,
-	 .n_bits = 12,
-	 .winsn = dac02_ao_winsn,
-	 .rinsn = readback_insn,
-	 .range = &range_unknown,
-	 },
-	{
-	 .name = "pcl733",
-	 .iosize = 4,
-	 .type = COMEDI_SUBD_DI,
-	 .n_chan = 32,
-	 .n_bits = 1,
-	 .insnbits = pcl733_insn_bits,
-	 .range = &range_digital,
-	 },
-	{
-	 .name = "pcl734",
-	 .iosize = 4,
-	 .type = COMEDI_SUBD_DO,
-	 .n_chan = 32,
-	 .n_bits = 1,
-	 .insnbits = pcl734_insn_bits,
-	 .range = &range_digital,
-	 },
-};
 
-#define n_boards ARRAY_SIZE(boards)
 #define this_board ((const struct boarddef_struct *)dev->board_ptr)
 
-static struct comedi_driver driver_poc = {
-	.driver_name = "poc",
-	.module = THIS_MODULE,
-	.attach = poc_attach,
-	.detach = poc_detach,
-	.board_name = &boards[0].name,
-	.num_names = n_boards,
-	.offset = sizeof(boards[0]),
-};
-
-static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase;
-	unsigned int iosize;
-
-	iobase = it->options[0];
-	printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor,
-	       this_board->name, iobase);
-
-	dev->board_name = this_board->name;
-
-	if (iobase == 0) {
-		printk(KERN_ERR "io base address required\n");
-		return -EINVAL;
-	}
-
-	iosize = this_board->iosize;
-	/* check if io addresses are available */
-	if (!request_region(iobase, iosize, "dac02")) {
-		printk(KERN_ERR "I/O port conflict: failed to allocate ports "
-			"0x%lx to 0x%lx\n", iobase, iobase + iosize - 1);
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-	if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0)
-		return -ENOMEM;
-
-	/* analog output subdevice */
-	s = dev->subdevices + 0;
-	s->type = this_board->type;
-	s->n_chan = this_board->n_chan;
-	s->maxdata = (1 << this_board->n_bits) - 1;
-	s->range_table = this_board->range;
-	s->insn_write = this_board->winsn;
-	s->insn_read = this_board->rinsn;
-	s->insn_bits = this_board->insnbits;
-	if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO)
-		s->subdev_flags = SDF_WRITABLE;
-
-	return 0;
-}
-
-static int poc_detach(struct comedi_device *dev)
-{
-	/* only free stuff if it has been allocated by _attach */
-	if (dev->iobase)
-		release_region(dev->iobase, this_board->iosize);
-
-	printk(KERN_INFO "comedi%d: dac02: remove\n", dev->minor);
-
-	return 0;
-}
-
 static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			 struct comedi_insn *insn, unsigned int *data)
 {
@@ -248,17 +135,113 @@ static int pcl734_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
+static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	unsigned long iobase;
+	unsigned int iosize;
+
+	iobase = it->options[0];
+	printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor,
+	       this_board->name, iobase);
+
+	dev->board_name = this_board->name;
+
+	if (iobase == 0) {
+		printk(KERN_ERR "io base address required\n");
+		return -EINVAL;
+	}
+
+	iosize = this_board->iosize;
+	/* check if io addresses are available */
+	if (!request_region(iobase, iosize, "dac02")) {
+		printk(KERN_ERR "I/O port conflict: failed to allocate ports "
+			"0x%lx to 0x%lx\n", iobase, iobase + iosize - 1);
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+	if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0)
+		return -ENOMEM;
+
+	/* analog output subdevice */
+	s = dev->subdevices + 0;
+	s->type = this_board->type;
+	s->n_chan = this_board->n_chan;
+	s->maxdata = (1 << this_board->n_bits) - 1;
+	s->range_table = this_board->range;
+	s->insn_write = this_board->winsn;
+	s->insn_read = this_board->rinsn;
+	s->insn_bits = this_board->insnbits;
+	if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO)
+		s->subdev_flags = SDF_WRITABLE;
+
+	return 0;
+}
+
+static int poc_detach(struct comedi_device *dev)
+{
+	/* only free stuff if it has been allocated by _attach */
+	if (dev->iobase)
+		release_region(dev->iobase, this_board->iosize);
+
+	printk(KERN_INFO "comedi%d: dac02: remove\n", dev->minor);
+
+	return 0;
+}
+
+static const struct boarddef_struct boards[] = {
+	{
+		.name		= "dac02",
+		.iosize		= 8,
+		/* .setup	= dac02_setup, */
+		.type		= COMEDI_SUBD_AO,
+		.n_chan		= 2,
+		.n_bits		= 12,
+		.winsn		= dac02_ao_winsn,
+		.rinsn		= readback_insn,
+		.range		= &range_unknown,
+	}, {
+		.name		= "pcl733",
+		.iosize		= 4,
+		.type		= COMEDI_SUBD_DI,
+		.n_chan		= 32,
+		.n_bits		= 1,
+		.insnbits	= pcl733_insn_bits,
+		.range		= &range_digital,
+	}, {
+		.name		= "pcl734",
+		.iosize		= 4,
+		.type		= COMEDI_SUBD_DO,
+		.n_chan		= 32,
+		.n_bits		= 1,
+		.insnbits	= pcl734_insn_bits,
+		.range		= &range_digital,
+	},
+};
+
+static struct comedi_driver driver_poc = {
+	.driver_name	= "poc",
+	.module		= THIS_MODULE,
+	.attach		= poc_attach,
+	.detach		= poc_detach,
+	.board_name	= &boards[0].name,
+	.num_names	= ARRAY_SIZE(boards),
+	.offset		= sizeof(boards[0]),
+};
+
 static int __init driver_poc_init_module(void)
 {
 	return comedi_driver_register(&driver_poc);
 }
+module_init(driver_poc_init_module);
 
 static void __exit driver_poc_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_poc);
 }
-
-module_init(driver_poc_init_module);
 module_exit(driver_poc_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 138441960506..0c15b82d997b 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -328,14 +328,6 @@ static const struct rtdBoard rtd520Boards[] = {
 	 },
 };
 
-static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, rtd520_pci_table);
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -353,7 +345,7 @@ struct rtdPrivate {
 
 	unsigned long intCount;	/* interrupt count */
 	long aiCount;		/* total transfer size (samples) */
-	int transCount;		/* # to tranfer data. 0->1/2FIFO */
+	int transCount;		/* # to transfer data. 0->1/2FIFO */
 	int flags;		/* flag event modes */
 
 	/* PCI device info */
@@ -377,8 +369,11 @@ struct rtdPrivate {
 	u8 utcCtrl[4];		/* crtl mode for 3 utc + read back */
 	u8 dioStatus;		/* could be read back (dio0Ctrl) */
 #ifdef USE_DMA
-	/* Always DMA 1/2 FIFO.  Buffer (dmaBuff?) is (at least) twice that size.
-	   After transferring, interrupt processes 1/2 FIFO and passes to comedi */
+	/*
+	 * Always DMA 1/2 FIFO.  Buffer (dmaBuff?) is (at least) twice that
+	 * size.  After transferring, interrupt processes 1/2 FIFO and
+	 * passes to comedi
+	 */
 	s16 dma0Offset;		/* current processing offset (0, 1/2) */
 	uint16_t *dma0Buff[DMA_CHAIN_COUNT];	/* DMA buffers (for ADC) */
 	dma_addr_t dma0BuffPhysAddr[DMA_CHAIN_COUNT];	/* physical addresses */
@@ -581,7 +576,8 @@ struct rtdPrivate {
 
 /* User output N source select (write only) */
 #define RtdUsrOutSource(dev, n, v) \
-	writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : LAS0_UOUT1_SELECT))
+	writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : \
+				LAS0_UOUT1_SELECT))
 
 /* Digital IO */
 #define RtdDio0Read(dev) \
@@ -608,7 +604,8 @@ struct rtdPrivate {
 /* Write one data value (sign + 12bit + marker bits) */
 /* Note: matches what DMA would put.  Actual value << 3 */
 #define RtdDacFifoPut(dev, n, v) \
-	writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : LAS1_DAC2_FIFO))
+	writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : \
+				LAS1_DAC2_FIFO))
 
 /* Start single DAC conversion */
 #define RtdDacUpdate(dev, n) \
@@ -625,7 +622,8 @@ struct rtdPrivate {
 
 /* Reset DAC FIFO */
 #define RtdDacClearFifo(dev, n) \
-	writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : LAS0_DAC2_RESET))
+	writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : \
+				LAS0_DAC2_RESET))
 
 /* Set source for DMA 0 (write only, shadow?) */
 #define RtdDma0Source(dev, n) \
@@ -705,22 +703,6 @@ struct rtdPrivate {
 #define RtdDma1Status(dev) \
 	readb(devpriv->lcfg+LCFG_DMACSR1)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attac/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int rtd_detach(struct comedi_device *dev);
-
-static struct comedi_driver rtd520Driver = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = rtd_attach,
-	.detach = rtd_detach,
-};
-
 static int rtd_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 			struct comedi_insn *insn, unsigned int *data);
 static int rtd_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -737,7 +719,10 @@ static int rtd_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_cmd *cmd);
 static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-/* static int rtd_ai_poll (struct comedi_device *dev,struct comedi_subdevice *s); */
+/*
+ * static int rtd_ai_poll(struct comedi_device *dev,
+ *			  struct comedi_subdevice *s);
+ */
 static int rtd_ns_to_timer(unsigned int *ns, int roundMode);
 static irqreturn_t rtd_interrupt(int irq, void *d);
 static int rtd520_probe_fifo_depth(struct comedi_device *dev);
@@ -857,7 +842,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
 		}
 
-		/* Undocumented EPLD version (doesn't match RTD driver results) */
+		/*
+		 * Undocumented EPLD version (doesn't match RTD driver results)
+		 */
 		/*DPRINTK ("rtd520: Reading epld from %p\n",
 		   devpriv->las0+0);
 		   epld_version = readl (devpriv->las0+0);
@@ -970,9 +957,11 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #ifdef USE_DMA
 	if (dev->irq > 0) {
 		printk("( DMA buff=%d )\n", DMA_CHAIN_COUNT);
-		/* The PLX9080 has 2 DMA controllers, but there could be 4 sources:
-		   ADC, digital, DAC1, and DAC2.  Since only the ADC supports cmd mode
-		   right now, this isn't an issue (yet) */
+		/*
+		 * The PLX9080 has 2 DMA controllers, but there could be
+		 * 4 sources: ADC, digital, DAC1, and DAC2.  Since only the
+		 * ADC supports cmd mode right now, this isn't an issue (yet)
+		 */
 		devpriv->dma0Offset = 0;
 
 		for (index = 0; index < DMA_CHAIN_COUNT; index++) {
@@ -988,10 +977,14 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			}
 			/*DPRINTK ("buff[%d] @ %p virtual, %x PCI\n",
 			   index,
-			   devpriv->dma0Buff[index], devpriv->dma0BuffPhysAddr[index]); */
+			   devpriv->dma0Buff[index],
+			   devpriv->dma0BuffPhysAddr[index]); */
 		}
 
-		/* setup DMA descriptor ring (use cpu_to_le32 for byte ordering?) */
+		/*
+		 * setup DMA descriptor ring (use cpu_to_le32 for byte
+		 * ordering?)
+		 */
 		devpriv->dma0Chain =
 		    pci_alloc_consistent(devpriv->pci_dev,
 					 sizeof(struct plx_dma_desc) *
@@ -1278,7 +1271,8 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		}
 	}
 	if (i == limit) {
-		printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
+		printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n",
+		       DRV_NAME);
 		return -EIO;
 	}
 	RtdAdcClearFifo(dev);
@@ -1378,9 +1372,10 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
 		d = RtdAdcFifoGet(dev);	/* get 2s comp value */
 
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
-			sample = d + 2048;	/* convert to comedi unsigned data */
-		else
+		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+			/* convert to comedi unsigned data */
+			sample = d + 2048;
+		} else
 			sample = d;
 
 		if (!comedi_buf_put(s->async, sample))
@@ -1406,9 +1401,10 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
 		}
 
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
-			sample = d + 2048;	/* convert to comedi unsigned data */
-		else
+		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+			/* convert to comedi unsigned data */
+			sample = d + 2048;
+		} else
 			sample = d;
 
 		if (!comedi_buf_put(s->async, sample))
@@ -1525,7 +1521,9 @@ static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s)
 	comedi_buf_memcpy_to(s->async, 0, dp, n);
 	comedi_buf_write_free(s->async, n);
 
-	/* always at least 1 scan -- 1/2 FIFO is larger than our max scan list */
+	/*
+	 * always at least 1 scan -- 1/2 FIFO is larger than our max scan list
+	 */
 	s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
 
 	if (++devpriv->dma0Offset >= DMA_CHAIN_COUNT) {	/* next buffer */
@@ -1989,7 +1987,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			    (TRANS_TARGET_PERIOD * cmd->chanlist_len) /
 			    cmd->scan_begin_arg;
 			if (devpriv->transCount < cmd->chanlist_len) {
-				/* tranfer after each scan (and avoid 0) */
+				/* transfer after each scan (and avoid 0) */
 				devpriv->transCount = cmd->chanlist_len;
 			} else {	/* make a multiple of scan length */
 				devpriv->transCount =
@@ -2005,12 +2003,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			devpriv->transCount = 0;
 			devpriv->flags &= ~SEND_EOS;
 		} else {
-			/* interrupt for each tranfer */
+			/* interrupt for each transfer */
 			RtdAboutCounter(dev, devpriv->transCount - 1);
 		}
 
 		DPRINTK
-		    ("rtd520: scanLen=%d tranferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
+		    ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
 		     cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen,
 		     cmd->scan_begin_arg, devpriv->flags);
 	} else {		/* unknown timing, just use 1/2 FIFO */
@@ -2348,14 +2346,17 @@ static int rtd_dio_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
+static struct comedi_driver rtd520Driver = {
+	.driver_name	= DRV_NAME,
+	.module		= THIS_MODULE,
+	.attach		= rtd_attach,
+	.detach		= rtd_detach,
+};
+
 static int __devinit rtd520Driver_pci_probe(struct pci_dev *dev,
 					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, rtd520Driver.driver_name);
+	return comedi_pci_auto_config(dev, &rtd520Driver);
 }
 
 static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev)
@@ -2363,10 +2364,17 @@ static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev)
 	comedi_pci_auto_unconfig(dev);
 }
 
+static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, rtd520_pci_table);
+
 static struct pci_driver rtd520Driver_pci_driver = {
-	.id_table = rtd520_pci_table,
-	.probe = &rtd520Driver_pci_probe,
-	.remove = __devexit_p(&rtd520Driver_pci_remove)
+	.id_table	= rtd520_pci_table,
+	.probe		= &rtd520Driver_pci_probe,
+	.remove		= __devexit_p(&rtd520Driver_pci_remove)
 };
 
 static int __init rtd520Driver_init_module(void)
@@ -2380,14 +2388,13 @@ static int __init rtd520Driver_init_module(void)
 	rtd520Driver_pci_driver.name = (char *)rtd520Driver.driver_name;
 	return pci_register_driver(&rtd520Driver_pci_driver);
 }
+module_init(rtd520Driver_init_module);
 
 static void __exit rtd520Driver_cleanup_module(void)
 {
 	pci_unregister_driver(&rtd520Driver_pci_driver);
 	comedi_driver_unregister(&rtd520Driver);
 }
-
-module_init(rtd520Driver_init_module);
 module_exit(rtd520Driver_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 72042b818310..9e082b3f969f 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -138,39 +138,8 @@ struct rti800_board {
 	int has_ao;
 };
 
-static const struct rti800_board boardtypes[] = {
-	{"rti800", 0},
-	{"rti815", 1},
-};
-
 #define this_board ((const struct rti800_board *)dev->board_ptr)
 
-static int rti800_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int rti800_detach(struct comedi_device *dev);
-static struct comedi_driver driver_rti800 = {
-	.driver_name = "rti800",
-	.module = THIS_MODULE,
-	.attach = rti800_attach,
-	.detach = rti800_detach,
-	.num_names = ARRAY_SIZE(boardtypes),
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct rti800_board),
-};
-
-static int __init driver_rti800_init_module(void)
-{
-	return comedi_driver_register(&driver_rti800);
-}
-
-static void __exit driver_rti800_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_rti800);
-}
-
-module_init(driver_rti800_init_module);
-module_exit(driver_rti800_cleanup_module);
-
 static irqreturn_t rti800_interrupt(int irq, void *dev);
 
 struct rti800_private {
@@ -487,6 +456,33 @@ static int rti800_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct rti800_board boardtypes[] = {
+	{ "rti800", 0 },
+	{ "rti815", 1 },
+};
+
+static struct comedi_driver driver_rti800 = {
+	.driver_name	= "rti800",
+	.module		= THIS_MODULE,
+	.attach		= rti800_attach,
+	.detach		= rti800_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct rti800_board),
+};
+
+static int __init driver_rti800_init_module(void)
+{
+	return comedi_driver_register(&driver_rti800);
+}
+module_init(driver_rti800_init_module);
+
+static void __exit driver_rti800_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_rti800);
+}
+module_exit(driver_rti800_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index f59cb11590f6..21baf1a1c405 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -47,29 +47,6 @@ Configuration Options:
 #define RTI802_DATALOW 1
 #define RTI802_DATAHIGH 2
 
-static int rti802_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int rti802_detach(struct comedi_device *dev);
-static struct comedi_driver driver_rti802 = {
-	.driver_name = "rti802",
-	.module = THIS_MODULE,
-	.attach = rti802_attach,
-	.detach = rti802_detach,
-};
-
-static int __init driver_rti802_init_module(void)
-{
-	return comedi_driver_register(&driver_rti802);
-}
-
-static void __exit driver_rti802_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_rti802);
-}
-
-module_init(driver_rti802_init_module);
-module_exit(driver_rti802_cleanup_module);
-
 struct rti802_private {
 	enum {
 		dac_2comp, dac_straight
@@ -162,6 +139,25 @@ static int rti802_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static struct comedi_driver driver_rti802 = {
+	.driver_name	= "rti802",
+	.module		= THIS_MODULE,
+	.attach		= rti802_attach,
+	.detach		= rti802_detach,
+};
+
+static int __init driver_rti802_init_module(void)
+{
+	return comedi_driver_register(&driver_rti802);
+}
+module_init(driver_rti802_init_module);
+
+static void __exit driver_rti802_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_rti802);
+}
+module_exit(driver_rti802_cleanup_module);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 2b34daedc3d7..ffe4362819e2 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -230,287 +230,6 @@ struct s526_private {
  */
 #define devpriv ((struct s526_private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int s526_detach(struct comedi_device *dev);
-static struct comedi_driver driver_s526 = {
-	.driver_name = "s526",
-	.module = THIS_MODULE,
-	.attach = s526_attach,
-	.detach = s526_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in s526_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &s526_boards[0].name,
-	.offset = sizeof(struct s526_board),
-	.num_names = ARRAY_SIZE(s526_boards),
-};
-
-static int s526_gpct_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
-static int s526_gpct_insn_config(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-static int s526_gpct_winsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
-static int s526_ai_insn_config(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_dio_insn_bits(struct comedi_device *dev,
-			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data);
-static int s526_dio_insn_config(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int iobase;
-	int i, n;
-/* short value; */
-/* int subdev_channel = 0; */
-	union cmReg cmReg;
-
-	printk(KERN_INFO "comedi%d: s526: ", dev->minor);
-
-	iobase = it->options[0];
-	if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
-		comedi_error(dev, "I/O port conflict");
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	printk("iobase=0x%lx\n", dev->iobase);
-
-	/*** make it a little quieter, exw, 8/29/06
-	for (i = 0; i < S526_NUM_PORTS; i++) {
-		printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]),
-				inw(ADDR_REG(s526_ports[i])));
-	}
-	***/
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_ptr = &s526_boards[0];
-
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct s526_private)) < 0)
-		return -ENOMEM;
-
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
-	dev->n_subdevices = 4;
-	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* GENERAL-PURPOSE COUNTER/TIME (GPCT) */
-	s->type = COMEDI_SUBD_COUNTER;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
-	/* KG: What does SDF_LSAMPL (see multiq3.c) mean? */
-	s->n_chan = thisboard->gpct_chans;
-	s->maxdata = 0x00ffffff;	/* 24 bit counter */
-	s->insn_read = s526_gpct_rinsn;
-	s->insn_config = s526_gpct_insn_config;
-	s->insn_write = s526_gpct_winsn;
-
-	/* Command are not implemented yet, however they are necessary to
-	   allocate the necessary memory for the comedi_async struct (used
-	   to trigger the GPCT in case of pulsegenerator function */
-	/* s->do_cmd = s526_gpct_cmd; */
-	/* s->do_cmdtest = s526_gpct_cmdtest; */
-	/* s->cancel = s526_gpct_cancel; */
-
-	s = dev->subdevices + 1;
-	/* dev->read_subdev=s; */
-	/* analog input subdevice */
-	s->type = COMEDI_SUBD_AI;
-	/* we support differential */
-	s->subdev_flags = SDF_READABLE | SDF_DIFF;
-	/* channels 0 to 7 are the regular differential inputs */
-	/* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */
-	s->n_chan = 10;
-	s->maxdata = 0xffff;
-	s->range_table = &range_bipolar10;
-	s->len_chanlist = 16;	/* This is the maximum chanlist length that
-				   the board can handle */
-	s->insn_read = s526_ai_rinsn;
-	s->insn_config = s526_ai_insn_config;
-
-	s = dev->subdevices + 2;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = 4;
-	s->maxdata = 0xffff;
-	s->range_table = &range_bipolar10;
-	s->insn_write = s526_ao_winsn;
-	s->insn_read = s526_ao_rinsn;
-
-	s = dev->subdevices + 3;
-	/* digital i/o subdevice */
-	if (thisboard->have_dio) {
-		s->type = COMEDI_SUBD_DIO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = 8;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->insn_bits = s526_dio_insn_bits;
-		s->insn_config = s526_dio_insn_config;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-
-#if 0
-	/*  Example of Counter Application */
-	/* One-shot (software trigger) */
-	cmReg.reg.coutSource = 0;	/*  out RCAP */
-	cmReg.reg.coutPolarity = 1;	/*  Polarity inverted */
-	cmReg.reg.autoLoadResetRcap = 1;/*  Auto load 0:disabled, 1:enabled */
-	cmReg.reg.hwCtEnableSource = 3;	/*  NOT RCAP */
-	cmReg.reg.ctEnableCtrl = 2;	/*  Hardware */
-	cmReg.reg.clockSource = 2;	/*  Internal */
-	cmReg.reg.countDir = 1;	/*  Down */
-	cmReg.reg.countDirCtrl = 1;	/*  Software */
-	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
-	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
-	cmReg.reg.reserved = 0;
-
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
-
-	outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
-	outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
-
-	/*  Reset the counter */
-	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-	/*  Load the counter from PR0 */
-	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-	/*  Reset RCAP (fires one-shot) */
-	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-
-#else
-
-	/*  Set Counter Mode Register */
-	cmReg.reg.coutSource = 0;	/*  out RCAP */
-	cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
-	cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
-	cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
-	cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
-	cmReg.reg.clockSource = 3;	/*  x4 */
-	cmReg.reg.countDir = 0;	/*  up */
-	cmReg.reg.countDirCtrl = 0;	/*  quadrature */
-	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
-	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
-	cmReg.reg.reserved = 0;
-
-	n = 0;
-	printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
-		cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	udelay(1000);
-	printk(KERN_INFO "Read back mode reg=0x%04x\n",
-		inw(ADDR_CHAN_REG(REG_C0M, n)));
-
-	/*  Load the pre-load register high word */
-/* value = (short) (0x55); */
-/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
-
-	/*  Load the pre-load register low word */
-/* value = (short)(0xaa55); */
-/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
-
-	/*  Write the Counter Control Register */
-/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
-
-	/*  Reset the counter if it is software preload */
-	if (cmReg.reg.autoLoadResetRcap == 0) {
-		/*  Reset the counter */
-		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));
-		/*  Load the counter from PR0 */
-		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));
-	}
-
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	udelay(1000);
-	printk(KERN_INFO "Read back mode reg=0x%04x\n",
-			inw(ADDR_CHAN_REG(REG_C0M, n)));
-
-#endif
-	printk(KERN_INFO "Current registres:\n");
-
-	for (i = 0; i < S526_NUM_PORTS; i++) {
-		printk(KERN_INFO "0x%02lx: 0x%04x\n",
-			ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
-	}
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int s526_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor);
-
-	if (dev->iobase > 0)
-		release_region(dev->iobase, S526_IOSIZE);
-
-	return 0;
-}
-
 static int s526_gpct_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
 			   unsigned int *data)
@@ -1023,21 +742,232 @@ static int s526_dio_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
+static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int iobase;
+	int i, n;
+/* short value; */
+/* int subdev_channel = 0; */
+	union cmReg cmReg;
+
+	printk(KERN_INFO "comedi%d: s526: ", dev->minor);
+
+	iobase = it->options[0];
+	if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
+		comedi_error(dev, "I/O port conflict");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	printk("iobase=0x%lx\n", dev->iobase);
+
+	/*** make it a little quieter, exw, 8/29/06
+	for (i = 0; i < S526_NUM_PORTS; i++) {
+		printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]),
+				inw(ADDR_REG(s526_ports[i])));
+	}
+	***/
+
+/*
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
+ */
+	dev->board_ptr = &s526_boards[0];
+
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+	if (alloc_private(dev, sizeof(struct s526_private)) < 0)
+		return -ENOMEM;
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Allocate the subdevice structures.  alloc_subdevice() is a
+ * convenient macro defined in comedidev.h.
  */
+	dev->n_subdevices = 4;
+	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* GENERAL-PURPOSE COUNTER/TIME (GPCT) */
+	s->type = COMEDI_SUBD_COUNTER;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
+	/* KG: What does SDF_LSAMPL (see multiq3.c) mean? */
+	s->n_chan = thisboard->gpct_chans;
+	s->maxdata = 0x00ffffff;	/* 24 bit counter */
+	s->insn_read = s526_gpct_rinsn;
+	s->insn_config = s526_gpct_insn_config;
+	s->insn_write = s526_gpct_winsn;
+
+	/* Command are not implemented yet, however they are necessary to
+	   allocate the necessary memory for the comedi_async struct (used
+	   to trigger the GPCT in case of pulsegenerator function */
+	/* s->do_cmd = s526_gpct_cmd; */
+	/* s->do_cmdtest = s526_gpct_cmdtest; */
+	/* s->cancel = s526_gpct_cancel; */
+
+	s = dev->subdevices + 1;
+	/* dev->read_subdev=s; */
+	/* analog input subdevice */
+	s->type = COMEDI_SUBD_AI;
+	/* we support differential */
+	s->subdev_flags = SDF_READABLE | SDF_DIFF;
+	/* channels 0 to 7 are the regular differential inputs */
+	/* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */
+	s->n_chan = 10;
+	s->maxdata = 0xffff;
+	s->range_table = &range_bipolar10;
+	s->len_chanlist = 16;	/* This is the maximum chanlist length that
+				   the board can handle */
+	s->insn_read = s526_ai_rinsn;
+	s->insn_config = s526_ai_insn_config;
+
+	s = dev->subdevices + 2;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = 4;
+	s->maxdata = 0xffff;
+	s->range_table = &range_bipolar10;
+	s->insn_write = s526_ao_winsn;
+	s->insn_read = s526_ao_rinsn;
+
+	s = dev->subdevices + 3;
+	/* digital i/o subdevice */
+	if (thisboard->have_dio) {
+		s->type = COMEDI_SUBD_DIO;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->n_chan = 8;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->insn_bits = s526_dio_insn_bits;
+		s->insn_config = s526_dio_insn_config;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
+
+#if 0
+	/*  Example of Counter Application */
+	/* One-shot (software trigger) */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 1;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 1;/*  Auto load 0:disabled, 1:enabled */
+	cmReg.reg.hwCtEnableSource = 3;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 2;	/*  Hardware */
+	cmReg.reg.clockSource = 2;	/*  Internal */
+	cmReg.reg.countDir = 1;	/*  Down */
+	cmReg.reg.countDirCtrl = 1;	/*  Software */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
+	cmReg.reg.reserved = 0;
+
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
+
+	outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
+	outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
+
+	/*  Reset the counter */
+	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+	/*  Load the counter from PR0 */
+	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+	/*  Reset RCAP (fires one-shot) */
+	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+
+#else
+
+	/*  Set Counter Mode Register */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
+	cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
+	cmReg.reg.clockSource = 3;	/*  x4 */
+	cmReg.reg.countDir = 0;	/*  up */
+	cmReg.reg.countDirCtrl = 0;	/*  quadrature */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
+	cmReg.reg.reserved = 0;
+
+	n = 0;
+	printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
+		cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	udelay(1000);
+	printk(KERN_INFO "Read back mode reg=0x%04x\n",
+		inw(ADDR_CHAN_REG(REG_C0M, n)));
+
+	/*  Load the pre-load register high word */
+/* value = (short) (0x55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
+
+	/*  Load the pre-load register low word */
+/* value = (short)(0xaa55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
+
+	/*  Write the Counter Control Register */
+/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
+
+	/*  Reset the counter if it is software preload */
+	if (cmReg.reg.autoLoadResetRcap == 0) {
+		/*  Reset the counter */
+		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));
+		/*  Load the counter from PR0 */
+		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));
+	}
+
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	udelay(1000);
+	printk(KERN_INFO "Read back mode reg=0x%04x\n",
+			inw(ADDR_CHAN_REG(REG_C0M, n)));
+
+#endif
+	printk(KERN_INFO "Current registres:\n");
+
+	for (i = 0; i < S526_NUM_PORTS; i++) {
+		printk(KERN_INFO "0x%02lx: 0x%04x\n",
+			ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
+	}
+	return 1;
+}
+
+static int s526_detach(struct comedi_device *dev)
+{
+	printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor);
+
+	if (dev->iobase > 0)
+		release_region(dev->iobase, S526_IOSIZE);
+
+	return 0;
+}
+
+static struct comedi_driver driver_s526 = {
+	.driver_name	= "s526",
+	.module		= THIS_MODULE,
+	.attach		= s526_attach,
+	.detach		= s526_detach,
+	.board_name	= &s526_boards[0].name,
+	.offset		= sizeof(struct s526_board),
+	.num_names	= ARRAY_SIZE(s526_boards),
+};
+
 static int __init driver_s526_init_module(void)
 {
 	return comedi_driver_register(&driver_s526);
 }
+module_init(driver_s526_init_module);
 
 static void __exit driver_s526_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_s526);
 }
-
-module_init(driver_s526_init_module);
 module_exit(driver_s526_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 23fc64b9988e..a0b7c713367f 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -83,8 +83,17 @@ MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>");
 MODULE_DESCRIPTION("Sensoray 626 Comedi driver module");
 MODULE_LICENSE("GPL");
 
+#define PCI_VENDOR_ID_S626 0x1131
+#define PCI_DEVICE_ID_S626 0x7146
+#define PCI_SUBVENDOR_ID_S626 0x6000
+#define PCI_SUBDEVICE_ID_S626 0x0272
+
 struct s626_board {
 	const char *name;
+	int vendor_id;
+	int device_id;
+	int subvendor_id;
+	int subdevice_id;
 	int ai_chans;
 	int ai_bits;
 	int ao_chans;
@@ -97,6 +106,10 @@ struct s626_board {
 static const struct s626_board s626_boards[] = {
 	{
 	 .name = "s626",
+	 .vendor_id = PCI_VENDOR_ID_S626,
+	 .device_id = PCI_DEVICE_ID_S626,
+	 .subvendor_id = PCI_SUBVENDOR_ID_S626,
+	 .subdevice_id = PCI_SUBDEVICE_ID_S626,
 	 .ai_chans = S626_ADC_CHANNELS,
 	 .ai_bits = 14,
 	 .ao_chans = S626_DAC_CHANNELS,
@@ -108,8 +121,6 @@ static const struct s626_board s626_boards[] = {
 };
 
 #define thisboard ((const struct s626_board *)dev->board_ptr)
-#define PCI_VENDOR_ID_S626 0x1131
-#define PCI_DEVICE_ID_S626 0x7146
 
 /*
  * For devices with vendor:device id == 0x1131:0x7146 you must specify
@@ -117,7 +128,7 @@ static const struct s626_board s626_boards[] = {
  * Philips SAA7146 media/dvb based cards.
  */
 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
+	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_SUBVENDOR_ID_S626, PCI_SUBDEVICE_ID_S626, 0, 0, 0},
 	{0}
 };
 
@@ -227,7 +238,7 @@ static struct dio_private *dio_private_word[]={
 static int __devinit driver_s626_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_s626.driver_name);
+	return comedi_pci_auto_config(dev, &driver_s626);
 }
 
 static void __devexit driver_s626_pci_remove(struct pci_dev *dev)
@@ -554,17 +565,17 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	resource_size_t resourceStart;
 	dma_addr_t appdma;
 	struct comedi_subdevice *s;
-	const struct pci_device_id *ids;
 	struct pci_dev *pdev = NULL;
 
 	if (alloc_private(dev, sizeof(struct s626_private)) < 0)
 		return -ENOMEM;
 
-	for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
-		ids = &s626_pci_table[i];
+	for (i = 0; i < ARRAY_SIZE(s626_boards) && !pdev; i++) {
 		do {
-			pdev = pci_get_subsys(ids->vendor, ids->device,
-					      ids->subvendor, ids->subdevice,
+			pdev = pci_get_subsys(s626_boards[i].vendor_id,
+					      s626_boards[i].device_id,
+					      s626_boards[i].subvendor_id,
+					      s626_boards[i].subdevice_id,
 					      pdev);
 
 			if ((it->options[0] || it->options[1]) && pdev) {
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index d880c2f6fbc1..a034b10b4fab 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -43,20 +43,10 @@ Status: in development
 #include <linux/serial.h>
 #include <linux/poll.h>
 
-/*
- * Board descriptions for two imaginary boards.  Describing the
- * boards in this way is optional, and completely driver-dependent.
- * Some drivers use arrays such as this, other do not.
- */
 struct serial2002_board {
 	const char *name;
 };
 
-static const struct serial2002_board serial2002_boards[] = {
-	{
-	 .name = "serial2002"}
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -89,35 +79,6 @@ struct serial2002_private {
  */
 #define devpriv ((struct serial2002_private *)dev->private)
 
-static int serial2002_attach(struct comedi_device *dev,
-			     struct comedi_devconfig *it);
-static int serial2002_detach(struct comedi_device *dev);
-struct comedi_driver driver_serial2002 = {
-	.driver_name = "serial2002",
-	.module = THIS_MODULE,
-	.attach = serial2002_attach,
-	.detach = serial2002_detach,
-	.board_name = &serial2002_boards[0].name,
-	.offset = sizeof(struct serial2002_board),
-	.num_names = ARRAY_SIZE(serial2002_boards),
-};
-
-static int serial2002_di_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_do_winsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ai_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ao_winsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ao_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
 struct serial_data {
 	enum { is_invalid, is_digital, is_channel } kind;
 	int index;
@@ -901,17 +862,32 @@ static int serial2002_detach(struct comedi_device *dev)
 	return 0;
 }
 
+static const struct serial2002_board serial2002_boards[] = {
+	{
+		.name	= "serial2002"
+	},
+};
+
+struct comedi_driver driver_serial2002 = {
+	.driver_name	= "serial2002",
+	.module		= THIS_MODULE,
+	.attach		= serial2002_attach,
+	.detach		= serial2002_detach,
+	.board_name	= &serial2002_boards[0].name,
+	.offset		= sizeof(struct serial2002_board),
+	.num_names	= ARRAY_SIZE(serial2002_boards),
+};
+
 static int __init driver_serial2002_init_module(void)
 {
 	return comedi_driver_register(&driver_serial2002);
 }
+module_init(driver_serial2002_init_module);
 
 static void __exit driver_serial2002_cleanup_module(void)
 {
 	comedi_driver_unregister(&driver_serial2002);
 }
-
-module_init(driver_serial2002_init_module);
 module_exit(driver_serial2002_cleanup_module);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index ed69008f0d39..19a513eeebfe 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -623,7 +623,7 @@ static int skel_dio_insn_config(struct comedi_device *dev,
 static int __devinit driver_skel_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_skel.driver_name);
+	return comedi_pci_auto_config(dev, &driver_skel);
 }
 
 static void __devexit driver_skel_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index bf62e0dd6f69..3d300eff493f 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -317,6 +317,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbdux;	/* see below for initializer */
+
 /*
  * Stops the data acquision
  * It should be safe to call this function from any context
@@ -2304,11 +2306,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 						     void *context)
 {
 	struct usbduxsub *usbduxsub_tmp = context;
-	struct usb_device *usbdev = usbduxsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Firmware complete handler without firmware!\n");
 		return;
 	}
@@ -2320,11 +2322,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 	ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbdux);
  out:
 	release_firmware(fw);
 }
@@ -2606,7 +2608,7 @@ static void usbduxsub_disconnect(struct usb_interface *intf)
 		dev_err(&intf->dev, "comedi_: BUG! called with wrong ptr!!!\n");
 		return;
 	}
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 	down(&start_stop_sem);
 	down(&usbduxsub_tmp->sem);
 	tidy_up(usbduxsub_tmp);
@@ -2615,46 +2617,21 @@ static void usbduxsub_disconnect(struct usb_interface *intf)
 	dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n");
 }
 
-/* is called when comedi-config is called */
-static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+/* common part of attach and attach_usb */
+static int usbdux_attach_common(struct comedi_device *dev,
+				struct usbduxsub *udev,
+				void *aux_data, int aux_len)
 {
 	int ret;
-	int index;
-	int i;
-	struct usbduxsub *udev;
-
 	struct comedi_subdevice *s = NULL;
-	dev->private = NULL;
-
-	down(&start_stop_sem);
-	/* find a valid device which has been detected by the probe function of
-	 * the usb */
-	index = -1;
-	for (i = 0; i < NUMUSBDUX; i++) {
-		if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
-			index = i;
-			break;
-		}
-	}
 
-	if (index < 0) {
-		printk(KERN_ERR "comedi%d: usbdux: error: attach failed, no "
-		       "usbdux devs connected to the usb bus.\n", dev->minor);
-		up(&start_stop_sem);
-		return -ENODEV;
-	}
-
-	udev = &usbduxsub[index];
 	down(&udev->sem);
 	/* pointer back to the corresponding comedi device */
 	udev->comedidev = dev;
 
 	/* trying to upload the firmware into the chip */
-	if (comedi_aux_data(it->options, 0) &&
-	    it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
-		firmwareUpload(udev, comedi_aux_data(it->options, 0),
-			       it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
-	}
+	if (aux_data)
+		firmwareUpload(udev, aux_data, aux_len);
 
 	dev->board_name = BOARDNAME;
 
@@ -2673,13 +2650,9 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		dev_err(&udev->interface->dev,
 			"comedi%d: error alloc space for subdev\n", dev->minor);
 		up(&udev->sem);
-		up(&start_stop_sem);
 		return ret;
 	}
 
-	dev_info(&udev->interface->dev,
-		 "comedi%d: usb-device %d is attached to comedi.\n",
-		 dev->minor, index);
 	/* private structure is also simply the usb-structure */
 	dev->private = udev;
 
@@ -2776,14 +2749,80 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	up(&udev->sem);
 
-	up(&start_stop_sem);
-
 	dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n",
 		 dev->minor);
 
 	return 0;
 }
 
+/* is called when comedi-config is called */
+static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	int ret;
+	int index;
+	int i;
+	void *aux_data;
+	int aux_len;
+
+	dev->private = NULL;
+
+	aux_data = comedi_aux_data(it->options, 0);
+	aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
+	if (aux_data == NULL)
+		aux_len = 0;
+	else if (aux_len == 0)
+		aux_data = NULL;
+
+	down(&start_stop_sem);
+	/* find a valid device which has been detected by the probe function of
+	 * the usb */
+	index = -1;
+	for (i = 0; i < NUMUSBDUX; i++) {
+		if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
+			index = i;
+			break;
+		}
+	}
+
+	if (index < 0) {
+		printk(KERN_ERR
+		       "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else
+		ret = usbdux_attach_common(dev, &usbduxsub[index],
+					   aux_data, aux_len);
+	up(&start_stop_sem);
+	return ret;
+}
+
+/* is called from comedi_usb_auto_config() */
+static int usbdux_attach_usb(struct comedi_device *dev,
+			     struct usb_interface *uinterf)
+{
+	int ret;
+	struct usbduxsub *this_usbduxsub;
+
+	dev->private = NULL;
+
+	down(&start_stop_sem);
+	this_usbduxsub = usb_get_intfdata(uinterf);
+	if (!this_usbduxsub || !this_usbduxsub->probed) {
+		printk(KERN_ERR
+		       "comedi%d: usbdux: error: attach_usb failed, not connected\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else if (this_usbduxsub->attached) {
+		printk(KERN_ERR
+		       "comedi%d: usbdux: error: attach_usb failed, already attached\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else
+		ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0);
+	up(&start_stop_sem);
+	return ret;
+}
+
 static int usbdux_detach(struct comedi_device *dev)
 {
 	struct usbduxsub *usbduxsub_tmp;
@@ -2822,6 +2861,7 @@ static struct comedi_driver driver_usbdux = {
 	.module = THIS_MODULE,
 	.attach = usbdux_attach,
 	.detach = usbdux_detach,
+	.attach_usb = usbdux_attach_usb,
 };
 
 /* Table with the USB-devices: just now only testing IDs */
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 2a8e725b7859..c672ea3784a6 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -201,6 +201,8 @@ static struct usbduxfastsub_s usbduxfastsub[NUMUSBDUXFAST];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbduxfast;	/* see below for initializer */
+
 /*
  * bulk transfers to usbduxfast
  */
@@ -453,14 +455,15 @@ static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
 	/* 7f92 to zero */
 	local_transfer_buffer[0] = 0;
 	/* bRequest, "Firmware" */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
-				VENDOR_DIR_OUT,	/* bmRequestType */
-				USBDUXFASTSUB_CPUCS,	/* Value */
-				0x0000,	/* Index */
-				/* address of the transfer buffer */
-				local_transfer_buffer,
-				1,	/* Length */
-				EZTIMEOUT);	/* Timeout */
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
+			      VENDOR_DIR_OUT,	  /* bmRequestType */
+			      USBDUXFASTSUB_CPUCS,    /* Value */
+			      0x0000,	/* Index */
+			      /* address of the transfer buffer */
+			      local_transfer_buffer,
+			      1,      /* Length */
+			      EZTIMEOUT);    /* Timeout */
 	if (ret < 0) {
 		printk("comedi_: usbduxfast_: control msg failed (start)\n");
 		return ret;
@@ -477,7 +480,8 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
 	/* 7f92 to one */
 	local_transfer_buffer[0] = 1;
 	/* bRequest, "Firmware" */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
 			      VENDOR_DIR_OUT,	/* bmRequestType */
 			      USBDUXFASTSUB_CPUCS,	/* Value */
 			      0x0000,	/* Index */
@@ -504,14 +508,15 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
 	       startAddr, local_transfer_buffer[0]);
 #endif
 	/* brequest, firmware */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
-				VENDOR_DIR_OUT,	/* bmRequestType */
-				startAddr,	/* value */
-				0x0000,	/* index */
-				/* our local safe buffer */
-				local_transfer_buffer,
-				len,	/* length */
-				EZTIMEOUT);	/* timeout */
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
+			      VENDOR_DIR_OUT,	/* bmRequestType */
+			      startAddr,	/* value */
+			      0x0000,	 /* index */
+			      /* our local safe buffer */
+			      local_transfer_buffer,
+			      len,	/* length */
+			      EZTIMEOUT);      /* timeout */
 
 #ifdef CONFIG_COMEDI_DEBUG
 	printk(KERN_DEBUG "comedi_: usbduxfast: result=%d\n", ret);
@@ -1440,7 +1445,7 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware
 							 *fw, void *context)
 {
 	struct usbduxfastsub_s *usbduxfastsub_tmp = context;
-	struct usb_device *usbdev = usbduxfastsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxfastsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL)
@@ -1453,12 +1458,12 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware
 	ret = firmwareUpload(usbduxfastsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
 
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbduxfast);
  out:
 	release_firmware(fw);
 }
@@ -1606,7 +1611,7 @@ static void usbduxfastsub_disconnect(struct usb_interface *intf)
 		return;
 	}
 
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 
 	down(&start_stop_sem);
 	down(&udfs->sem);
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index 63c9b6dbc317..f21bb0dd9167 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -267,6 +267,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbduxsigma;	/* see below for initializer */
+
 /*
  * Stops the data acquision
  * It should be safe to call this function from any context
@@ -2312,11 +2314,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 						     void *context)
 {
 	struct usbduxsub *usbduxsub_tmp = context;
-	struct usb_device *usbdev = usbduxsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Firmware complete handler without firmware!\n");
 		return;
 	}
@@ -2328,11 +2330,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 	ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbduxsigma);
 out:
 	release_firmware(fw);
 }
@@ -2623,7 +2625,7 @@ static void usbduxsigma_disconnect(struct usb_interface *intf)
 	if (usbduxsub_tmp->ao_cmd_running)
 		/* we are still running a command */
 		usbdux_ao_stop(usbduxsub_tmp, 1);
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 	down(&start_stop_sem);
 	down(&usbduxsub_tmp->sem);
 	tidy_up(usbduxsub_tmp);
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 3d13ca6e1670..a7db6862f75c 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -247,6 +247,8 @@ static struct vmk80xx_usb vmb[VMK80XX_MAX_BOARDS];
 
 static DEFINE_MUTEX(glb_mutex);
 
+static struct comedi_driver driver_vmk80xx;	/* see below for initializer */
+
 static void vmk80xx_tx_callback(struct urb *urb)
 {
 	struct vmk80xx_usb *dev = urb->context;
@@ -295,7 +297,9 @@ resubmit:
 		if (!usb_submit_urb(urb, GFP_KERNEL))
 			goto exit;
 
-		err("comedi#: vmk80xx: %s - submit urb failed\n", __func__);
+		dev_err(&urb->dev->dev,
+			"comedi#: vmk80xx: %s - submit urb failed\n",
+			__func__);
 
 		usb_unanchor_urb(urb);
 	}
@@ -1018,12 +1022,12 @@ static int vmk80xx_cnt_cinsn(struct comedi_device *cdev,
 	if (n)
 		return n;
 
-	down(&dev->limit_sem);
-
 	insn_cmd = data[0];
 	if (insn_cmd != INSN_CONFIG_RESET && insn_cmd != GPCT_RESET)
 		return -EINVAL;
 
+	down(&dev->limit_sem);
+
 	chan = CR_CHAN(insn->chanspec);
 
 	if (dev->board.model == VMK8055_MODEL) {
@@ -1482,7 +1486,7 @@ static int vmk80xx_probe(struct usb_interface *intf,
 
 	mutex_unlock(&glb_mutex);
 
-	comedi_usb_auto_config(dev->udev, BOARDNAME);
+	comedi_usb_auto_config(intf, &driver_vmk80xx);
 
 	return 0;
 error:
@@ -1500,7 +1504,7 @@ static void vmk80xx_disconnect(struct usb_interface *intf)
 	if (!dev)
 		return;
 
-	comedi_usb_auto_unconfig(dev->udev);
+	comedi_usb_auto_unconfig(intf);
 
 	mutex_lock(&glb_mutex);
 	down(&dev->limit_sem);
diff --git a/drivers/staging/comedi/internal.h b/drivers/staging/comedi/internal.h
index 434ce3433368..7ed20a04eef5 100644
--- a/drivers/staging/comedi/internal.h
+++ b/drivers/staging/comedi/internal.h
@@ -1,5 +1,5 @@
 /*
- * various internal comedi functions
+ * various internal comedi stuff
  */
 int do_rangeinfo_ioctl(struct comedi_device *dev,
 		       struct comedi_rangeinfo __user *arg);
@@ -7,6 +7,10 @@ int insn_inval(struct comedi_device *dev, struct comedi_subdevice *s,
 	       struct comedi_insn *insn, unsigned int *data);
 int comedi_alloc_board_minor(struct device *hardware_device);
 void comedi_free_board_minor(unsigned minor);
+int comedi_find_board_minor(struct device *hardware_device);
 void comedi_reset_async_buf(struct comedi_async *async);
 int comedi_buf_alloc(struct comedi_device *dev, struct comedi_subdevice *s,
 		     unsigned long new_size);
+
+extern unsigned int comedi_default_buf_size_kb;
+extern unsigned int comedi_default_buf_maxsize_kb;
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 886f5650444e..5b11c5e3622e 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1710,7 +1710,8 @@ static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
 		return value;
 }
 
-static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
+static int et131x_mdio_write(struct mii_bus *bus, int phy_addr,
+			     int reg, u16 value)
 {
 	struct net_device *netdev = bus->priv;
 	struct et131x_adapter *adapter = netdev_priv(netdev);
@@ -4013,7 +4014,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 		dev_err(&pdev->dev, "Missing PCIe capabilities\n");
 		goto err_out;
 	}
-		
+
 	/* Let's set up the PORT LOGIC Register.  First we need to know what
 	 * the max_payload_size is
 	 */
@@ -4060,7 +4061,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 		goto err_out;
 	}
 
-	ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | ( 0x04 << 12);
+	ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | (0x04 << 12);
 
 	if (pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl)) {
 		dev_err(&pdev->dev,
@@ -4824,7 +4825,8 @@ static int et131x_open(struct net_device *netdev)
 	adapter->error_timer.data = (unsigned long)adapter;
 	add_timer(&adapter->error_timer);
 
-	result = request_irq(irq, et131x_isr, IRQF_SHARED, netdev->name, netdev);
+	result = request_irq(irq, et131x_isr,
+			     IRQF_SHARED, netdev->name, netdev);
 	if (result) {
 		dev_err(&pdev->dev, "could not register IRQ %d\n", irq);
 		return result;
diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c
index 3bf0f40e97fd..acbb2cc510f9 100644
--- a/drivers/staging/frontier/alphatrack.c
+++ b/drivers/staging/frontier/alphatrack.c
@@ -333,8 +333,8 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&usb_alphatrack_driver, subminor);
 
 	if (!interface) {
-		err("%s - error, can't find device for minor %d\n",
-		    __func__, subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto unlock_disconnect_exit;
 	}
@@ -494,7 +494,8 @@ static ssize_t usb_alphatrack_read(struct file *file, char __user *buffer,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+		       __func__, retval);
 		goto unlock_exit;
 	}
 
@@ -564,7 +565,8 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+		       __func__, retval);
 		goto unlock_exit;
 	}
 
@@ -599,7 +601,7 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	}
 
 	if (dev->interrupt_out_endpoint == NULL) {
-		err("Endpoint should not be be null!\n");
+		dev_err(&dev->intf->dev, "Endpoint should not be be null!\n");
 		goto unlock_exit;
 	}
 
@@ -619,7 +621,8 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		atomic_dec(&dev->writes_pending);
 		goto unlock_exit;
 	}
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index 29e99bbcae48..376706f1c712 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -353,7 +353,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&usb_tranzport_driver, subminor);
 
 	if (!interface) {
-		err("%s - error, can't find device for minor %d\n",
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
 			__func__, subminor);
 		retval = -ENODEV;
 		goto unlock_disconnect_exit;
@@ -517,9 +517,11 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer,
 		goto exit;
 	}
 
-	/* verify that the device wasn't unplugged */ if (dev->intf == NULL) {
+	/* verify that the device wasn't unplugged */
+	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+			__func__, retval);
 		goto unlock_exit;
 	}
 
@@ -691,7 +693,8 @@ static ssize_t usb_tranzport_write(struct file *file,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+			__func__, retval);
 		goto unlock_exit;
 	}
 
@@ -726,7 +729,7 @@ static ssize_t usb_tranzport_write(struct file *file,
 	}
 
 	if (dev->interrupt_out_endpoint == NULL) {
-		err("Endpoint should not be be null!\n");
+		dev_err(&dev->intf->dev, "Endpoint should not be be null!\n");
 		goto unlock_exit;
 	}
 
@@ -746,7 +749,8 @@ static ssize_t usb_tranzport_write(struct file *file,
 	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		goto unlock_exit;
 	}
 	retval = bytes_to_write;
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 8926f2448cc9..0338c7cd0a8b 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -8,7 +8,7 @@ The crucial structure for device drivers in iio is iio_dev.
 
 First allocate one using:
 
-struct iio_dev *indio_dev = iio_allocate_device(sizeof(struct chip_state));
+struct iio_dev *indio_dev = iio_device_alloc(sizeof(struct chip_state));
 where chip_state is a structure of local state data for this instance of
 the chip.
 
@@ -78,4 +78,4 @@ be registered afterwards (otherwise the whole parentage of devices
 gets confused)
 
 On remove, iio_device_unregister(indio_dev) will remove the device from
-the core, and iio_free_device will clean up.
+the core, and iio_device_free will clean up.
diff --git a/drivers/staging/iio/Documentation/generic_buffer.c b/drivers/staging/iio/Documentation/generic_buffer.c
index 69a05b9456d6..bf553356fdad 100644
--- a/drivers/staging/iio/Documentation/generic_buffer.c
+++ b/drivers/staging/iio/Documentation/generic_buffer.c
@@ -60,9 +60,9 @@ void print2byte(int input, struct iio_channel_info *info)
 	/* First swap if incorrect endian */
 
 	if (info->be)
-		input = be16toh((uint_16t)input);
+		input = be16toh((uint16_t)input);
 	else
-		input = le16toh((uint_16t)input);
+		input = le16toh((uint16_t)input);
 
 	/* shift before conversion to avoid sign extension
 	   of left aligned data */
diff --git a/drivers/staging/iio/Documentation/iio_event_monitor.c b/drivers/staging/iio/Documentation/iio_event_monitor.c
index 0d21a277305f..22275845fb12 100644
--- a/drivers/staging/iio/Documentation/iio_event_monitor.c
+++ b/drivers/staging/iio/Documentation/iio_event_monitor.c
@@ -27,7 +27,7 @@
 #include <fcntl.h>
 #include <sys/ioctl.h>
 #include "iio_utils.h"
-#include "../events.h"
+#include <linux/iio/events.h>
 
 static const char * const iio_chan_type_name_spec[] = {
 	[IIO_VOLTAGE] = "voltage",
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
new file mode 100755
index 000000000000..470f7ad9c073
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,6 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
new file mode 100755
index 000000000000..b2798b258bf7
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+KernelVersion:	3.3-rc1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_proximity0_calibrate
+KernelVersion:	3.3-rc1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Causes a recalculation and adjustment to the
+		proximity_thresh_rising_value.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
new file mode 100644
index 000000000000..1c35c507cc05
--- /dev/null
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
@@ -0,0 +1,20 @@
+What:		/sys/.../iio:deviceX/ac_excitation_en
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, is used to enable the AC
+		excitation mode found on some converters. In ac excitation mode,
+		the polarity of the excitation voltage is reversed on
+		alternate cycles, to eliminate DC errors.
+
+What:		/sys/.../iio:deviceX/bridge_switch_en
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, is used to close or open the
+		bridge power down switch found on some converters.
+		In bridge applications, such as strain gauges and load cells,
+		the bridge itself consumes the majority of the current in the
+		system. To minimize the current consumption of the system,
+		the bridge can be disconnected (when it is not being used
+		using the bridge_switch_en attribute.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
index ffdd5478a35d..ee8c509c6733 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
@@ -1,83 +1,86 @@
 
-What:		/sys/bus/iio/devices/.../ddsX_freqY
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencyY
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Stores frequency into tuning word Y.
-		There will be more than one ddsX_freqY file, which allows for
-		pin controlled FSK Frequency Shift Keying
-		(ddsX_pincontrol_freq_en is active) or the user can control
-		the desired active tuning word by writing Y to the
-		ddsX_freqsymbol file.
+		There will be more than one out_altvoltageX_frequencyY file,
+		which allows for pin controlled FSK Frequency Shift Keying
+		(out_altvoltageX_pincontrol_frequency_en is active) or the user
+		can control the desired active tuning word by writing Y to the
+		out_altvoltageX_frequencysymbol file.
 
-What:		/sys/bus/iio/devices/.../ddsX_freqY_scale
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Scale to be applied to ddsX_freqY in order to obtain the
-		desired value in Hz. If shared across all frequency registers
-		Y is not present. It is also possible X is not present if
-		shared across all channels.
+		Scale to be applied to out_altvoltageX_frequencyY in order to
+		obtain the desired value in Hz. If shared across all frequency
+		registers Y is not present. It is also possible X is not present
+		if shared across all channels.
 
-What:		/sys/bus/iio/devices/.../ddsX_freqsymbol
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the active output frequency tuning word. The value
-		corresponds to the Y in ddsX_freqY. To exit this mode the user
-		can write ddsX_pincontrol_freq_en or ddsX_out_enable file.
+		corresponds to the Y in out_altvoltageX_frequencyY.
+		To exit this mode the user can write
+		out_altvoltageX_pincontrol_frequency_en or
+		out_altvoltageX_out_enable file.
 
-What:		/sys/bus/iio/devices/.../ddsX_phaseY
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phaseY
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Stores phase into Y.
-		There will be more than one ddsX_phaseY file, which allows for
-		pin controlled PSK Phase Shift Keying
-		(ddsX_pincontrol_phase_en is active) or the user can
+		There will be more than one out_altvoltageX_phaseY file, which
+		allows for pin controlled PSK Phase Shift Keying
+		(out_altvoltageX_pincontrol_phase_en is active) or the user can
 		control the desired phase Y which is added to the phase
-		accumulator output by writing Y to the en_phase file.
+		accumulator output by writing Y to the phase_en file.
 
-What:		/sys/bus/iio/devices/.../ddsX_phaseY_scale
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Scale to be applied to ddsX_phaseY in order to obtain the
-		desired value in rad. If shared across all phase registers
+		Scale to be applied to out_altvoltageX_phaseY in order to obtain
+		the desired value in rad. If shared across all phase registers
 		Y is not present. It is also possible X is not present if
 		shared across all channels.
 
-What:		/sys/bus/iio/devices/.../ddsX_phasesymbol
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phasesymbol
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the active phase Y which is added to the phase
 		accumulator output. The value corresponds to the Y in
-		ddsX_phaseY. To exit this mode the user can write
-		ddsX_pincontrol_phase_en or disable file.
+		out_altvoltageX_phaseY. To exit this mode the user can write
+		out_altvoltageX_pincontrol_phase_en or disable file.
 
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_en
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_freq_en
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_phase_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		ddsX_pincontrol_en: Both, the active frequency and phase is
-		controlled by the respective phase and frequency control inputs.
-		In case the device in question allows to independent controls,
-		then there are dedicated files (ddsX_pincontrol_freq_en,
-		ddsX_pincontrol_phase_en).
+		out_altvoltageX_pincontrol_en: Both, the active frequency and
+		phase is controlled by the respective phase and frequency
+		control inputs. In case the device in features independent
+		controls, then there are dedicated files
+		(out_altvoltageX_pincontrol_frequency_en,
+		out_altvoltageX_pincontrol_phase_en).
 
-What:		/sys/bus/iio/devices/.../ddsX_out_enable
-What:		/sys/bus/iio/devices/.../ddsX_outY_enable
+What:		/sys/bus/iio/devices/.../out_altvoltageX_out_enable
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_enable
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		ddsX_outY_enable controls signal generation on output Y of
-		channel X. Y may be suppressed if all channels are
+		out_altvoltageX_outY_enable controls signal generation on
+		output Y of channel X. Y may be suppressed if all channels are
 		controlled together.
 
-What:		/sys/bus/iio/devices/.../ddsX_outY_wavetype
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -86,7 +89,7 @@ Description:
 		For a list of available output waveform options read
 		available_output_modes.
 
-What:		/sys/bus/iio/devices/.../ddsX_outY_wavetype_available
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index edbf470e4e30..715c74dcb53a 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -26,7 +26,7 @@ Description:
 		Hardware dependent list of possible values supported for the
 		adc_resolution of the given sensor.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw]
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -45,7 +45,7 @@ Description:
 		do this calculation manually by reading the infrared sensor
 		value and doing the negation in sw.
 
-What:		/sys/bus/iio/devices/device[n]/proximity[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_proximity[_input|_raw]
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -63,23 +63,22 @@ Description:
 		and if expressed in SI units, should include _input. If this
 		value is not in SI units, then it should include _raw.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_target
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_target
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		This property gets/sets the last known external
 		lux measurement used in/for calibration.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_integration_time
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_integration_time
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		This property gets/sets the sensors ADC analog integration time.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_calibscale
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_lux_table
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Hardware or software applied calibration scale factor assumed
-		to account for attenuation due to industrial design (glass
-		filters or aperture holes).
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
diff --git a/drivers/staging/iio/Documentation/trigger.txt b/drivers/staging/iio/Documentation/trigger.txt
index fc2012ebc100..75cc37ff1ed0 100644
--- a/drivers/staging/iio/Documentation/trigger.txt
+++ b/drivers/staging/iio/Documentation/trigger.txt
@@ -5,7 +5,7 @@ an IIO device.  Whilst this can create device specific complexities
 such triggers are registered with the core in the same way as
 stand-alone triggers.
 
-struct iio_trig *trig = iio_allocate_trigger("<trigger format string>", ...);
+struct iio_trig *trig = iio_trigger_alloc("<trigger format string>", ...);
 
 allocates a trigger structure.  The key elements to then fill in within
 a driver are:
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index fe1586718880..3c8e5ec26ac1 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -1,16 +1,9 @@
 #
 # Industrial I/O subsytem configuration
 #
+menu "IIO staging drivers"
+	depends on IIO
 
-menuconfig IIO
-	tristate "Industrial I/O support"
-	depends on GENERIC_HARDIRQS
-	help
-	  The industrial I/O subsystem provides a unified framework for
-	  drivers for many different types of embedded sensors using a
-	  number of different physical interfaces (i2c, spi, etc). See
-	  drivers/staging/iio/Documentation for more information.
-if IIO
 config IIO_ST_HWMON
 	tristate "Hwmon driver that uses channels specified via iio maps"
 	depends on HWMON
@@ -19,12 +12,6 @@ config IIO_ST_HWMON
 	  map allows IIO devices to provide  basic hwmon functionality
 	  for those channels specified in the map.
 
-config IIO_BUFFER
-	bool "Enable buffer support within IIO"
-	help
-	  Provide core support for various buffer based data
-	  acquisition methods.
-
 if IIO_BUFFER
 
 config IIO_SW_RING
@@ -36,39 +23,14 @@ config IIO_SW_RING
 	  with the intention that some devices would be able to write
 	  in interrupt context.
 
-config IIO_KFIFO_BUF
-	select IIO_TRIGGER
-	tristate "Industrial I/O buffering based on kfifo"
-	help
-	  A simple fifo based on kfifo.  Use this if you want a fifo
-	  rather than a ring buffer. Note that this currently provides
-	  no buffer events so it is up to userspace to work out how
-	  often to read from the buffer.
-
 endif # IIO_BUFFER
 
-config IIO_TRIGGER
-	boolean "Enable triggered sampling support"
-	help
-	  Provides IIO core support for triggers.  Currently these
-	  are used to initialize capture of samples to push into
-	  ring buffers.  The triggers are effectively a 'capture
-	  data now' interrupt.
-
-config IIO_CONSUMERS_PER_TRIGGER
-       int "Maximum number of consumers per trigger"
-       depends on IIO_TRIGGER
-       default "2"
-       help
-	This value controls the maximum number of consumers that a
-	given trigger may handle. Default is 2.
-
 source "drivers/staging/iio/accel/Kconfig"
 source "drivers/staging/iio/adc/Kconfig"
 source "drivers/staging/iio/addac/Kconfig"
 source "drivers/staging/iio/cdc/Kconfig"
 source "drivers/staging/iio/dac/Kconfig"
-source "drivers/staging/iio/dds/Kconfig"
+source "drivers/staging/iio/frequency/Kconfig"
 source "drivers/staging/iio/gyro/Kconfig"
 source "drivers/staging/iio/impedance-analyzer/Kconfig"
 source "drivers/staging/iio/imu/Kconfig"
@@ -104,4 +66,4 @@ config IIO_SIMPLE_DUMMY_BUFFER
 
 endif # IIO_SIMPLE_DUMMY
 
-endif # IIO
+endmenu
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 5075291dda7a..6a46d5afb380 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -2,13 +2,7 @@
 # Makefile for the industrial I/O core.
 #
 
-obj-$(CONFIG_IIO) += industrialio.o
-industrialio-y := industrialio-core.o industrialio-event.o inkern.o
-industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
-industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
-
 obj-$(CONFIG_IIO_SW_RING) += ring_sw.o
-obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
 
 obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
 iio_dummy-y := iio_simple_dummy.o
@@ -24,7 +18,7 @@ obj-y += adc/
 obj-y += addac/
 obj-y += cdc/
 obj-y += dac/
-obj-y += dds/
+obj-y += frequency/
 obj-y += gyro/
 obj-y += impedance-analyzer/
 obj-y += imu/
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index d439e45d07fa..62667803c5a7 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -15,9 +15,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16201.h"
 
@@ -298,7 +298,7 @@ static int adis16201_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16201_addresses[chan->address][0];
 		ret = adis16201_spi_read_reg_16(indio_dev, addr, &val16);
@@ -406,39 +406,104 @@ static int adis16201_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16201_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16201_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
+		.address = in_supply,
+		.scan_index = ADIS16201_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16201_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
+		.address = temp,
+		.scan_index = ADIS16201_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16201_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
+		.address = accel_x,
+		.scan_index = ADIS16201_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16201_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
+		.address = accel_y,
+		.scan_index = ADIS16201_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16201_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
+		.address = in_aux,
+		.scan_index = ADIS16201_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_x, ADIS16201_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
+		.address = incli_x,
+		.scan_index = ADIS16201_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_y, ADIS16201_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
+		.address = incli_y,
+		.scan_index = ADIS16201_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(7)
 };
 
@@ -467,7 +532,7 @@ static int __devinit adis16201_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -522,7 +587,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16201_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -535,7 +600,7 @@ static int adis16201_remove(struct spi_device *spi)
 	adis16201_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16201_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16201_ring.c b/drivers/staging/iio/accel/adis16201_ring.c
index 97f9e6b159d9..247602a8e54c 100644
--- a/drivers/staging/iio/accel/adis16201_ring.c
+++ b/drivers/staging/iio/accel/adis16201_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16201.h"
 
 
@@ -66,9 +66,8 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -81,7 +80,7 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16201_trigger.c b/drivers/staging/iio/accel/adis16201_trigger.c
index bce505e716d0..96fdabbac201 100644
--- a/drivers/staging/iio/accel/adis16201_trigger.c
+++ b/drivers/staging/iio/accel/adis16201_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16201.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16201_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16201-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16201-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -56,7 +56,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -67,5 +67,5 @@ void adis16201_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(state->trig);
 	free_irq(state->us->irq, state->trig);
-	iio_free_trigger(state->trig);
+	iio_trigger_free(state->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c
index 1a5140f9e3f4..42d7eea06d1a 100644
--- a/drivers/staging/iio/accel/adis16203_core.c
+++ b/drivers/staging/iio/accel/adis16203_core.c
@@ -15,9 +15,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16203.h"
 
@@ -305,7 +305,7 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 	u8 addr;
 	s16 val16;
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16203_addresses[chan->address][0];
 		ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16);
@@ -372,29 +372,75 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16203_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16203_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16203_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_x, ADIS16203_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	/* Fixme: Not what it appears to be - see data sheet */
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_y, ADIS16203_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16203_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16203_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16203_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = incli_x,
+		.scan_index = ADIS16203_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, { /* Fixme: Not what it appears to be - see data sheet */
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_y,
+		.scan_index = ADIS16203_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16203_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 
@@ -423,7 +469,7 @@ static int __devinit adis16203_probe(struct spi_device *spi)
 	struct adis16203_state *st;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -477,7 +523,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16203_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -490,7 +536,7 @@ static int adis16203_remove(struct spi_device *spi)
 	adis16203_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16203_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16203_ring.c b/drivers/staging/iio/accel/adis16203_ring.c
index 6a8963db4f60..2171f7483e71 100644
--- a/drivers/staging/iio/accel/adis16203_ring.c
+++ b/drivers/staging/iio/accel/adis16203_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16203.h"
 
 /**
@@ -66,9 +66,8 @@ static irqreturn_t adis16203_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -81,7 +80,7 @@ static irqreturn_t adis16203_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring,
diff --git a/drivers/staging/iio/accel/adis16203_trigger.c b/drivers/staging/iio/accel/adis16203_trigger.c
index 24bcb8e15c55..b8a04073d6d7 100644
--- a/drivers/staging/iio/accel/adis16203_trigger.c
+++ b/drivers/staging/iio/accel/adis16203_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16203.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16203_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16203-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16203-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -58,7 +58,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -69,5 +69,5 @@ void adis16203_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c
index fa89364b841e..eacda583313a 100644
--- a/drivers/staging/iio/accel/adis16204_core.c
+++ b/drivers/staging/iio/accel/adis16204_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16204.h"
 
@@ -342,7 +342,7 @@ static int adis16204_read_raw(struct iio_dev *indio_dev,
 	int addrind;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16204_addresses[chan->address][0];
 		ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16);
@@ -444,31 +444,78 @@ static int adis16204_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16204_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 0, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16204_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16204_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16204_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
-		 IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
-		 accel_x, ADIS16204_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
-		 IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
-		 accel_y, ADIS16204_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1, /* Note was not previously indexed */
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16204_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16204_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16204_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16204_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16204_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 
@@ -498,7 +545,7 @@ static int __devinit adis16204_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -551,7 +598,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16204_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -564,7 +611,7 @@ static int adis16204_remove(struct spi_device *spi)
 	adis16204_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16204_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16204_ring.c b/drivers/staging/iio/accel/adis16204_ring.c
index 5c8ab7338864..0a8b1255fd1c 100644
--- a/drivers/staging/iio/accel/adis16204_ring.c
+++ b/drivers/staging/iio/accel/adis16204_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16204.h"
 
 /**
@@ -63,9 +63,8 @@ static irqreturn_t adis16204_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -78,7 +77,7 @@ static irqreturn_t adis16204_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16204_trigger.c b/drivers/staging/iio/accel/adis16204_trigger.c
index 6e542af02c09..408a1682368e 100644
--- a/drivers/staging/iio/accel/adis16204_trigger.c
+++ b/drivers/staging/iio/accel/adis16204_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16204.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16204_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16204-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16204-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -58,7 +58,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -69,5 +69,5 @@ void adis16204_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(state->trig);
 	free_irq(state->us->irq, state->trig);
-	iio_free_trigger(state->trig);
+	iio_trigger_free(state->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c
index a98715f6bd6d..8e8dbe6b707d 100644
--- a/drivers/staging/iio/accel/adis16209_core.c
+++ b/drivers/staging/iio/accel/adis16209_core.c
@@ -16,9 +16,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16209.h"
 
@@ -331,7 +331,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16209_addresses[chan->address][0];
 		ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16);
@@ -408,41 +408,114 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16209_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16209_SCAN_SUPPLY,
-		 IIO_ST('u', 14, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16209_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16209_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16209_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16209_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_x, ADIS16209_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_y, ADIS16209_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ROT, 0, 1, 0, NULL, 0, IIO_MOD_X,
-		    0,
-		    rot, ADIS16209_SCAN_ROT,
-		    IIO_ST('s', 14, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16209_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 0,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16209_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16209_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16209_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16209_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_x,
+		.scan_index = ADIS16209_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_y,
+		.scan_index = ADIS16209_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+		.address = rot,
+		.scan_index = ADIS16209_SCAN_ROT,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(8)
 };
 
@@ -471,7 +544,7 @@ static int __devinit adis16209_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -524,7 +597,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16209_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -539,7 +612,7 @@ static int adis16209_remove(struct spi_device *spi)
 	adis16209_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16209_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c
index 57254b6b38b7..f7ed989dd20c 100644
--- a/drivers/staging/iio/accel/adis16209_ring.c
+++ b/drivers/staging/iio/accel/adis16209_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16209.h"
 
 /**
@@ -61,12 +61,10 @@ static irqreturn_t adis16209_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adis16209_state *st = iio_priv(indio_dev);
 	struct iio_buffer *ring = indio_dev->buffer;
-
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -79,7 +77,7 @@ static irqreturn_t adis16209_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c
index c5d82c1a55d9..2ad93dcaf40d 100644
--- a/drivers/staging/iio/accel/adis16209_trigger.c
+++ b/drivers/staging/iio/accel/adis16209_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16209.h"
 
 /**
@@ -38,7 +38,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16209_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16209-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16209-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -66,7 +66,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -77,5 +77,5 @@ void adis16209_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index 51a852d45482..e8c513db2d23 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -15,8 +15,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "adis16220.h"
 
@@ -507,7 +507,7 @@ static int adis16220_read_raw(struct iio_dev *indio_dev,
 	u8 bits;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		addrind = 0;
 		break;
 	case IIO_CHAN_INFO_OFFSET:
@@ -575,11 +575,13 @@ static const struct iio_chan_spec adis16220_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 	}, {
 		.type = IIO_ACCEL,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 			     IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
 		.address = accel,
@@ -587,20 +589,23 @@ static const struct iio_chan_spec adis16220_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 2,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = in_2,
 	}
 };
@@ -629,7 +634,7 @@ static int __devinit adis16220_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -680,7 +685,7 @@ error_rm_accel_bin:
 error_unregister_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -695,7 +700,7 @@ static int adis16220_remove(struct spi_device *spi)
 	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
 	sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c
index 17f77fef7f2b..f043bbdce36f 100644
--- a/drivers/staging/iio/accel/adis16240_core.c
+++ b/drivers/staging/iio/accel/adis16240_core.c
@@ -19,9 +19,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16240.h"
 
@@ -365,7 +365,7 @@ static int adis16240_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16240_addresses[chan->address][0];
 		ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16);
@@ -468,33 +468,88 @@ static int adis16240_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16240_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16240_SCAN_SUPPLY,
-		 IIO_ST('u', 10, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 0,
-		 in_aux, ADIS16240_SCAN_AUX_ADC,
-		 IIO_ST('u', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16240_SCAN_ACC_X,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16240_SCAN_ACC_Y,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_z, ADIS16240_SCAN_ACC_Z,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 temp, ADIS16240_SCAN_TEMP,
-		 IIO_ST('u', 10, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16240_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16240_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16240_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16240_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_z,
+		.scan_index = ADIS16240_SCAN_ACC_Z,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16240_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(6)
 };
 
@@ -523,7 +578,7 @@ static int __devinit adis16240_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -576,7 +631,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16240_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -592,7 +647,7 @@ static int adis16240_remove(struct spi_device *spi)
 	adis16240_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16240_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c
index 43ba84e993ad..1aa95662e542 100644
--- a/drivers/staging/iio/accel/adis16240_ring.c
+++ b/drivers/staging/iio/accel/adis16240_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16240.h"
 
 /**
@@ -61,9 +61,8 @@ static irqreturn_t adis16240_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -76,7 +75,7 @@ static irqreturn_t adis16240_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c
index 8e0ce568e64c..fa90a22b143e 100644
--- a/drivers/staging/iio/accel/adis16240_trigger.c
+++ b/drivers/staging/iio/accel/adis16240_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16240.h"
 
 /**
@@ -38,7 +38,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16240_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16240-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16240-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -67,7 +67,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -78,5 +78,5 @@ void adis16240_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/kxsd9.c b/drivers/staging/iio/accel/kxsd9.c
index d13d7215ff6e..8cf7cd943c90 100644
--- a/drivers/staging/iio/accel/kxsd9.c
+++ b/drivers/staging/iio/accel/kxsd9.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define KXSD9_REG_X		0x00
 #define KXSD9_REG_Y		0x02
@@ -158,7 +158,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 	struct kxsd9_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = kxsd9_read(indio_dev, chan->address);
 		if (ret < 0)
 			goto error_ret;
@@ -181,7 +181,8 @@ error_ret:
 		.type = IIO_ACCEL,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
 		.address = KXSD9_REG_##axis,				\
 	}
 
@@ -189,6 +190,7 @@ static struct iio_chan_spec kxsd9_channels[] = {
 	KXSD9_ACCEL_CHAN(X), KXSD9_ACCEL_CHAN(Y), KXSD9_ACCEL_CHAN(Z),
 	{
 		.type = IIO_VOLTAGE,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.indexed = 1,
 		.address = KXSD9_REG_AUX,
 	}
@@ -226,7 +228,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi)
 	struct kxsd9_state *st;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -254,7 +256,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -262,7 +264,7 @@ error_ret:
 static int __devexit kxsd9_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index 376da5137967..a7780439af15 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -23,10 +23,10 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "lis3l02dq.h"
 
@@ -257,7 +257,7 @@ static int lis3l02dq_read_raw(struct iio_dev *indio_dev,
 	u8 reg;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* Take the iio_dev status lock */
 		mutex_lock(&indio_dev->mlock);
 		if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
@@ -513,7 +513,8 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
 }
 
 #define LIS3L02DQ_INFO_MASK				\
-	(IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
+	(IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	 IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
 	 IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
 	 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT)
 
@@ -521,13 +522,26 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
 	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |	\
 	 IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
 
+#define LIS3L02DQ_CHAN(index, mod)				\
+	{							\
+		.type = IIO_ACCEL,				\
+		.modified = 1,					\
+		.channel2 = mod,				\
+		.info_mask =  LIS3L02DQ_INFO_MASK,		\
+		.address = index,				\
+		.scan_index = index,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 12,				\
+			.storagebits = 16,			\
+		},						\
+		.event_mask = LIS3L02DQ_EVENT_MASK,		\
+	 }
+
 static struct iio_chan_spec lis3l02dq_channels[] = {
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, LIS3L02DQ_INFO_MASK,
-		 0, 0, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, LIS3L02DQ_INFO_MASK,
-		 1, 1, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, LIS3L02DQ_INFO_MASK,
-		 2, 2, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
+	LIS3L02DQ_CHAN(0, IIO_MOD_X),
+	LIS3L02DQ_CHAN(1, IIO_MOD_Y),
+	LIS3L02DQ_CHAN(2, IIO_MOD_Z),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -666,7 +680,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	struct lis3l02dq_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof *st);
+	indio_dev = iio_device_alloc(sizeof *st);
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -724,7 +738,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)))
 		lis3l02dq_remove_trigger(indio_dev);
 error_free_interrupt:
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
@@ -734,7 +748,7 @@ error_uninitialize_buffer:
 error_unreg_buffer_funcs:
 	lis3l02dq_unconfigure_buffer(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -789,7 +803,7 @@ static int lis3l02dq_remove(struct spi_device *spi)
 	iio_buffer_unregister(indio_dev);
 	lis3l02dq_unconfigure_buffer(indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 err_ret:
 	return ret;
 }
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 0fc3973f32ae..9306f934e333 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -6,11 +6,11 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../kfifo_buf.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 #include "lis3l02dq.h"
 
 /**
@@ -137,9 +137,9 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int len = 0;
-	size_t datasize = buffer->access->get_bytes_per_datum(buffer);
-	char *data = kmalloc(datasize, GFP_KERNEL);
+	char *data;
 
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(indio_dev->dev.parent,
 			"memory alloc failed in buffer bh");
@@ -150,7 +150,7 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 		len = lis3l02dq_get_buffer_element(indio_dev, data);
 
 	  /* Guaranteed to be aligned with 8 byte boundary */
-	if (buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*(s64 *)(((phys_addr_t)data + len
 				+ sizeof(s64) - 1) & ~(sizeof(s64) - 1))
 			= pf->timestamp;
@@ -286,7 +286,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct lis3l02dq_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("lis3l02dq-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("lis3l02dq-dev%d", indio_dev->id);
 	if (!st->trig) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -302,7 +302,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	return 0;
 
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -312,7 +312,7 @@ void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
 	struct lis3l02dq_state *st = iio_priv(indio_dev);
 
 	iio_trigger_unregister(st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index 49764fb7181c..3c5aea5efb2b 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -18,10 +18,10 @@
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "sca3000.h"
 
@@ -429,17 +429,31 @@ static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR,
 static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0);
 
 #define SCA3000_INFO_MASK			\
-	IIO_CHAN_INFO_SCALE_SHARED_BIT
+	IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT
 #define SCA3000_EVENT_MASK					\
 	(IIO_EV_BIT(IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING))
 
+#define SCA3000_CHAN(index, mod)				\
+	{							\
+		.type = IIO_ACCEL,				\
+		.modified = 1,					\
+		.channel2 = mod,				\
+		.info_mask = SCA3000_INFO_MASK,			\
+		.address = index,				\
+		.scan_index = index,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 11,				\
+			.storagebits = 16,			\
+			.shift = 5,				\
+		},						\
+		.event_mask = SCA3000_EVENT_MASK,		\
+	 }
+
 static struct iio_chan_spec sca3000_channels[] = {
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, SCA3000_INFO_MASK,
-		 0, 0, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, SCA3000_INFO_MASK,
-		 1, 1, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, SCA3000_INFO_MASK,
-		 2, 2, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
+	SCA3000_CHAN(0, IIO_MOD_X),
+	SCA3000_CHAN(1, IIO_MOD_Y),
+	SCA3000_CHAN(2, IIO_MOD_Z),
 };
 
 static u8 sca3000_addresses[3][3] = {
@@ -462,7 +476,7 @@ static int sca3000_read_raw(struct iio_dev *indio_dev,
 	u8 address;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&st->lock);
 		if (st->mo_det_use_count) {
 			mutex_unlock(&st->lock);
@@ -1131,7 +1145,7 @@ static int __devinit sca3000_probe(struct spi_device *spi)
 	struct sca3000_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -1195,7 +1209,7 @@ error_unregister_ring:
 error_unregister_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -1233,7 +1247,7 @@ static int sca3000_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	sca3000_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index 6b824a11f7f4..889bc86047f9 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -18,9 +18,9 @@
 #include <linux/sched.h>
 #include <linux/poll.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "../ring_hw.h"
 #include "sca3000.h"
 
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 592eabd85f36..2490dd25093b 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -25,7 +25,7 @@ config AD7606
 	depends on GPIOLIB
 	select IIO_BUFFER
 	select IIO_TRIGGER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for Analog Devices:
 	  ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
@@ -63,7 +63,7 @@ config AD799X_RING_BUFFER
 	bool "Analog Devices AD799x: use ring buffer"
 	depends on AD799X
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to include ring buffer support in the AD799X
 	  ADC driver.
@@ -72,7 +72,7 @@ config AD7476
 	tristate "Analog Devices AD7475/6/7/8 AD7466/7/8 and AD7495 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -87,7 +87,7 @@ config AD7887
 	tristate "Analog Devices AD7887 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -113,7 +113,7 @@ config AD7793
 	tristate "Analog Devices AD7792 AD7793 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -135,7 +135,7 @@ config AD7192
 	tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices AD7190,
@@ -195,11 +195,20 @@ config MAX1363_RING_BUFFER
 
 config LPC32XX_ADC
 	tristate "NXP LPC32XX ADC"
-	depends on ARCH_LPC32XX && !TOUCHSCREEN_LPC32XX
+	depends on ARCH_LPC32XX
 	help
 	  Say yes here to build support for the integrated ADC inside the
 	  LPC32XX SoC. Note that this feature uses the same hardware as the
-	  touchscreen driver, so you can only select one of the two drivers
-	  (lpc32xx_adc or lpc32xx_ts). Provides direct access via sysfs.
+	  touchscreen driver, so you should either select only one of the two
+	  drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case,
+	  activate only one via device tree selection.  Provides direct access
+	  via sysfs.
+
+config SPEAR_ADC
+	tristate "ST SPEAr ADC"
+	depends on PLAT_SPEAR
+	help
+	  Say yes here to build support for the integrated ADC inside the
+	  ST SPEAr SoC. Provides direct access via sysfs.
 
 endmenu
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index f83ab9551d8e..14e98b62b70a 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_ADT7310) += adt7310.o
 obj-$(CONFIG_ADT7410) += adt7410.o
 obj-$(CONFIG_AD7280) += ad7280a.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
+obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 9fd6d63d2999..d5655e3b8efd 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -1,7 +1,7 @@
 /*
  * AD7190 AD7192 AD7195 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -17,12 +17,12 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7192.h"
 
@@ -456,31 +456,19 @@ out:
 static int ad7192_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
+
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		 indio_dev->channels[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	st->mode  = (st->mode & ~AD7192_MODE_SEL(-1)) |
 		    AD7192_MODE_SEL(AD7192_MODE_CONT);
 	st->conf  = (st->conf & ~AD7192_CONF_CHAN(-1)) |
@@ -533,7 +521,7 @@ static irqreturn_t ad7192_trigger_handler(int irq, void *p)
 				  indio_dev->channels[0].scan_type.realbits/8);
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -556,7 +544,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -569,7 +557,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -579,8 +567,8 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -588,7 +576,7 @@ error_ret:
 static void ad7192_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
 
 /**
@@ -616,7 +604,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev)
 	struct ad7192_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->spi)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -649,7 +637,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->spi->irq, indio_dev);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -660,7 +648,7 @@ static void ad7192_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->spi->irq, indio_dev);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 static ssize_t ad7192_read_frequency(struct device *dev,
@@ -849,7 +837,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -981,7 +969,8 @@ static const struct iio_info ad7195_info = {
 	  .extend_name = _name,						\
 	  .channel = _chan,						\
 	  .channel2 = _chan2,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -990,7 +979,8 @@ static const struct iio_info ad7195_info = {
 	{ .type = IIO_VOLTAGE,						\
 	  .indexed = 1,							\
 	  .channel = _chan,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -999,7 +989,8 @@ static const struct iio_info ad7195_info = {
 	{ .type = IIO_TEMP,						\
 	  .indexed = 1,							\
 	  .channel = _chan,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SEPARATE_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -1033,7 +1024,7 @@ static int __devinit ad7192_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -1114,7 +1105,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index 7dbd6812c240..9c3b66f37395 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -16,9 +16,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 #include "ad7280a.h"
 
@@ -508,6 +508,7 @@ static int ad7280_channel_init(struct ad7280_state *st)
 			}
 			st->channels[cnt].indexed = 1;
 			st->channels[cnt].info_mask =
+				IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 				IIO_CHAN_INFO_SCALE_SHARED_BIT;
 			st->channels[cnt].address =
 				AD7280A_DEVADDR(dev) << 8 | ch;
@@ -524,7 +525,9 @@ static int ad7280_channel_init(struct ad7280_state *st)
 	st->channels[cnt].channel2 = dev * 6;
 	st->channels[cnt].address = AD7280A_ALL_CELLS;
 	st->channels[cnt].indexed = 1;
-	st->channels[cnt].info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT;
+	st->channels[cnt].info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT;
 	st->channels[cnt].scan_index = cnt;
 	st->channels[cnt].scan_type.sign = 'u';
 	st->channels[cnt].scan_type.realbits = 32;
@@ -788,7 +791,7 @@ static int ad7280_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (chan->address == AD7280A_ALL_CELLS)
 			ret = ad7280_read_all_channels(st, st->scan_cnt, NULL);
@@ -836,7 +839,7 @@ static int __devinit ad7280_probe(struct spi_device *spi)
 	int ret;
 	const unsigned short tACQ_ns[4] = {465, 1010, 1460, 1890};
 	const unsigned short nAVG[4] = {1, 2, 4, 8};
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -942,7 +945,7 @@ error_free_channels:
 	kfree(st->channels);
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -961,7 +964,7 @@ static int __devexit ad7280_remove(struct spi_device *spi)
 
 	kfree(st->channels);
 	kfree(st->iio_attr);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index 81d6b6128cb0..a987c2011ec1 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -17,9 +17,9 @@
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * Simplified handling
@@ -461,7 +461,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 	s16 signval;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		switch (chan->type) {
 		case IIO_VOLTAGE:
 			mutex_lock(&chip->state_lock);
@@ -536,7 +536,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 #define AD7291_VOLTAGE_CHAN(_chan)					\
 {									\
 	.type = IIO_VOLTAGE,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,					\
 	.indexed = 1,							\
 	.channel = _chan,						\
 	.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\
@@ -554,7 +555,8 @@ static const struct iio_chan_spec ad7291_channels[] = {
 	AD7291_VOLTAGE_CHAN(7),
 	{
 		.type = IIO_TEMP,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
 				IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.indexed = 1,
 		.channel = 0,
@@ -585,7 +587,7 @@ static int __devinit ad7291_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int ret = 0, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -667,7 +669,7 @@ error_put_reg:
 	if (!IS_ERR(chip->reg))
 		regulator_put(chip->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -687,7 +689,7 @@ static int __devexit ad7291_remove(struct i2c_client *client)
 		regulator_put(chip->reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h
index a0e5dea415ef..5051a7e4d4fd 100644
--- a/drivers/staging/iio/adc/ad7298.h
+++ b/drivers/staging/iio/adc/ad7298.h
@@ -38,7 +38,6 @@ struct ad7298_platform_data {
 struct ad7298_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	unsigned			ext_ref;
 	struct spi_transfer		ring_xfer[10];
diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298_core.c
index 8dd6aa9cf928..c90f2b3e661f 100644
--- a/drivers/staging/iio/adc/ad7298_core.c
+++ b/drivers/staging/iio/adc/ad7298_core.c
@@ -16,40 +16,51 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7298.h"
 
+#define AD7298_V_CHAN(index)						\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = index,					\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
+		.address = index,					\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+	}
+
 static struct iio_chan_spec ad7298_channels[] = {
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 9, AD7298_CH_TEMP, IIO_ST('s', 32, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 0, 0, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 1, 1, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 2, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 2, 2, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 3, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 3, 3, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 4, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 4, 4, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 5, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 5, 5, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 6, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 6, 6, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 7, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 7, 7, IIO_ST('u', 12, 16, 0), 0),
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = 9,
+		.scan_index = AD7298_CH_TEMP,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+		},
+	},
+	AD7298_V_CHAN(0),
+	AD7298_V_CHAN(1),
+	AD7298_V_CHAN(2),
+	AD7298_V_CHAN(3),
+	AD7298_V_CHAN(4),
+	AD7298_V_CHAN(5),
+	AD7298_V_CHAN(6),
+	AD7298_V_CHAN(7),
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 };
 
@@ -121,7 +132,7 @@ static int ad7298_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
 			ret = -EBUSY;
@@ -168,7 +179,7 @@ static int __devinit ad7298_probe(struct spi_device *spi)
 	struct ad7298_platform_data *pdata = spi->dev.platform_data;
 	struct ad7298_state *st;
 	int ret;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -241,7 +252,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -258,7 +269,7 @@ static int __devexit ad7298_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
index feeb0eeba59a..908a3e5609df 100644
--- a/drivers/staging/iio/adc/ad7298_ring.c
+++ b/drivers/staging/iio/adc/ad7298_ring.c
@@ -1,7 +1,7 @@
 /*
  * AD7298 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -11,10 +11,10 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7298.h"
 
@@ -28,25 +28,17 @@
 static int ad7298_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7298_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	int i, m;
 	unsigned short command;
-	int scan_count = bitmap_weight(indio_dev->active_scan_mask,
-				       indio_dev->masklength);
-	d_size = scan_count * (AD7298_STORAGE_BITS / 8);
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
+	int scan_count, ret;
 
-	if (ring->access->set_bytes_per_datum)
-		ring->access->set_bytes_per_datum(ring, d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
-	st->d_size = d_size;
+	/* Now compute overall size */
+	scan_count = bitmap_weight(indio_dev->active_scan_mask,
+				   indio_dev->masklength);
 
 	command = AD7298_WRITE | st->ext_ref;
 
@@ -100,9 +92,9 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p)
 	if (b_sent)
 		return b_sent;
 
-	if (ring->scan_timestamp) {
+	if (indio_dev->scan_timestamp) {
 		time_ns = iio_get_time_ns();
-		memcpy((u8 *)buf + st->d_size - sizeof(s64),
+		memcpy((u8 *)buf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 	}
 
@@ -126,7 +118,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -140,7 +132,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -151,8 +143,8 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -160,5 +152,5 @@ error_ret:
 void ad7298_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7476.h b/drivers/staging/iio/adc/ad7476.h
index 27f696c75cc4..b1dd9317fe1f 100644
--- a/drivers/staging/iio/adc/ad7476.h
+++ b/drivers/staging/iio/adc/ad7476.h
@@ -27,7 +27,6 @@ struct ad7476_state {
 	struct spi_device		*spi;
 	const struct ad7476_chip_info	*chip_info;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	struct spi_transfer		xfer;
 	struct spi_message		msg;
diff --git a/drivers/staging/iio/adc/ad7476_core.c b/drivers/staging/iio/adc/ad7476_core.c
index 0c064d1c3927..be1c260cf165 100644
--- a/drivers/staging/iio/adc/ad7476_core.c
+++ b/drivers/staging/iio/adc/ad7476_core.c
@@ -15,9 +15,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7476.h"
 
@@ -43,7 +43,7 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -66,53 +66,51 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+#define AD7476_CHAN(bits)					\
+	{							\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = bits,				\
+		.storagebits = 16,				\
+		.shift = 12 - bits,				\
+	},							\
+}
+
 static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
 	[ID_AD7466] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7467] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 10, 16, 2), 0),
+		.channel[0] = AD7476_CHAN(10),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7468] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1 , 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 8, 16, 4), 0),
+		.channel[0] = AD7476_CHAN(8),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7475] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7476] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7477] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 10, 16, 2), 0),
+		.channel[0] = AD7476_CHAN(10),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7478] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 8, 16, 4), 0),
+		.channel[0] = AD7476_CHAN(8),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7495] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 		.int_vref_mv = 2500,
 	},
@@ -130,7 +128,7 @@ static int __devinit ad7476_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -200,7 +198,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -218,7 +216,7 @@ static int ad7476_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7476_ring.c b/drivers/staging/iio/adc/ad7476_ring.c
index d6af6c05ce1c..383611b05764 100644
--- a/drivers/staging/iio/adc/ad7476_ring.c
+++ b/drivers/staging/iio/adc/ad7476_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Analog Devices Inc.
+ * Copyright 2010-2012 Analog Devices Inc.
  * Copyright (C) 2008 Jonathan Cameron
  *
  * Licensed under the GPL-2 or later.
@@ -13,43 +13,13 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7476.h"
 
-/**
- * ad7476_ring_preenable() setup the parameters of the ring before enabling
- *
- * The complex nature of the setting of the number of bytes per datum is due
- * to this driver currently ensuring that the timestamp is stored at an 8
- * byte boundary.
- **/
-static int ad7476_ring_preenable(struct iio_dev *indio_dev)
-{
-	struct ad7476_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) *
-		st->chip_info->channel[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
-
-	return 0;
-}
-
 static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 {
 	struct iio_poll_func *pf = p;
@@ -59,7 +29,7 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 	__u8 *rxbuf;
 	int b_sent;
 
-	rxbuf = kzalloc(st->d_size, GFP_KERNEL);
+	rxbuf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (rxbuf == NULL)
 		return -ENOMEM;
 
@@ -70,8 +40,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (indio_dev->buffer->scan_timestamp)
-		memcpy(rxbuf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 
 	indio_dev->buffer->access->store_to(indio_dev->buffer, rxbuf, time_ns);
@@ -83,7 +53,7 @@ done:
 }
 
 static const struct iio_buffer_setup_ops ad7476_ring_setup_ops = {
-	.preenable = &ad7476_ring_preenable,
+	.preenable = &iio_sw_buffer_preenable,
 	.postenable = &iio_triggered_buffer_postenable,
 	.predisable = &iio_triggered_buffer_predisable,
 };
@@ -93,7 +63,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	struct ad7476_state *st = iio_priv(indio_dev);
 	int ret = 0;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -108,7 +78,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 				     indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -119,8 +89,8 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -128,5 +98,5 @@ error_ret:
 void ad7476_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 97e8d3d4471e..f82d36c603c1 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -18,9 +18,9 @@
 #include <linux/sched.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7606.h"
 
@@ -88,7 +88,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -229,14 +229,15 @@ static const struct attribute_group ad7606_attribute_group_range = {
 	.attrs = ad7606_attributes_range,
 };
 
-#define AD7606_CHANNEL(num)				\
-	{						\
-		.type = IIO_VOLTAGE,			\
-		.indexed = 1,				\
-		.channel = num,				\
-		.address = num,				\
-		.scan_index = num,			\
-		.scan_type = IIO_ST('s', 16, 16, 0),	\
+#define AD7606_CHANNEL(num)					\
+	{							\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = num,					\
+		.address = num,					\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+		.scan_index = num,				\
+		.scan_type = IIO_ST('s', 16, 16, 0),		\
 	}
 
 static struct iio_chan_spec ad7606_8_channels[] = {
@@ -460,7 +461,7 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq,
 	struct ad7606_platform_data *pdata = dev->platform_data;
 	struct ad7606_state *st;
 	int ret;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
@@ -559,7 +560,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ERR_PTR(ret);
 }
@@ -579,7 +580,7 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq)
 	}
 
 	ad7606_free_gpios(st);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index bb152a8e8c92..a53faafec070 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -12,7 +12,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ad7606.h"
 
 static int ad7606_par16_read_block(struct device *dev,
diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c
index 1ef9fbcaf2de..24ce8fc71646 100644
--- a/drivers/staging/iio/adc/ad7606_ring.c
+++ b/drivers/staging/iio/adc/ad7606_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  *
@@ -11,10 +11,10 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7606.h"
 
@@ -51,8 +51,7 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
 	__u8 *buf;
 	int ret;
 
-	buf = kzalloc(ring->access->get_bytes_per_datum(ring),
-		      GFP_KERNEL);
+	buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (buf == NULL)
 		return;
 
@@ -82,9 +81,8 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
 
 	time_ns = iio_get_time_ns();
 
-	if (ring->scan_timestamp)
-		*((s64 *)(buf + ring->access->get_bytes_per_datum(ring) -
-			  sizeof(s64))) = time_ns;
+	if (indio_dev->scan_timestamp)
+		*((s64 *)(buf + indio_dev->scan_bytes - sizeof(s64))) = time_ns;
 
 	ring->access->store_to(indio_dev->buffer, buf, time_ns);
 done:
@@ -104,7 +102,7 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -119,13 +117,13 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
 
 	indio_dev->setup_ops = &ad7606_ring_setup_ops;
-	indio_dev->buffer->scan_timestamp = true ;
+	indio_dev->buffer->scan_timestamp = true;
 
 	INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring);
 
@@ -133,8 +131,8 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -142,5 +140,5 @@ error_ret:
 void ad7606_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
index 237f1c44d296..099d347da52d 100644
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ b/drivers/staging/iio/adc/ad7606_spi.c
@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <linux/err.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ad7606.h"
 
 #define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index a13e58c814e6..1ece2ac8de56 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -18,8 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "ad7780.h"
 
@@ -94,7 +94,7 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 	unsigned long scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = ad7780_read(st, &smpl);
 		mutex_unlock(&indio_dev->mlock);
@@ -126,14 +126,34 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 
 static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 	[ID_AD7780] = {
-		.channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				    IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				    0, 0, IIO_ST('s', 24, 32, 8), 0),
+		.channel = {
+			.type = IIO_VOLTAGE,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.scan_type = {
+				.sign = 's',
+				.realbits = 24,
+				.storagebits = 32,
+				.shift = 8,
+			},
+		},
 	},
 	[ID_AD7781] = {
-		.channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				    IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				    0, 0, IIO_ST('s', 20, 32, 12), 0),
+		.channel = {
+			.type = IIO_VOLTAGE,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.scan_type = {
+				.sign = 's',
+				.realbits = 20,
+				.storagebits = 32,
+				.shift = 12,
+			},
+		},
 	},
 };
 
@@ -167,7 +187,7 @@ static int __devinit ad7780_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -245,7 +265,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -262,7 +282,7 @@ static int ad7780_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c
index 84ecde1ad042..61df7964f949 100644
--- a/drivers/staging/iio/adc/ad7793.c
+++ b/drivers/staging/iio/adc/ad7793.c
@@ -1,7 +1,7 @@
 /*
  * AD7792/AD7793 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -18,12 +18,12 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7793.h"
 
@@ -319,31 +319,18 @@ out:
 static int ad7793_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7793_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		indio_dev->channels[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	st->mode  = (st->mode & ~AD7793_MODE_SEL(-1)) |
 		    AD7793_MODE_SEL(AD7793_MODE_CONT);
 	st->conf  = (st->conf & ~AD7793_CONF_CHAN(-1)) |
@@ -399,7 +386,7 @@ static irqreturn_t ad7793_trigger_handler(int irq, void *p)
 				  indio_dev->channels[0].scan_type.realbits/8);
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -422,7 +409,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -435,7 +422,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -445,8 +432,8 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -454,7 +441,7 @@ error_ret:
 static void ad7793_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
 
 /**
@@ -482,7 +469,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev)
 	struct ad7793_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->spi)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -516,7 +503,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->spi->irq, indio_dev);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -527,7 +514,7 @@ static void ad7793_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->spi->irq, indio_dev);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19,
@@ -630,7 +617,7 @@ static int ad7793_read_raw(struct iio_dev *indio_dev,
 	bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -760,7 +747,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 0,
 			.channel2 = 0,
 			.address = AD7793_CH_AIN1P_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 0,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -771,7 +759,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 1,
 			.channel2 = 1,
 			.address = AD7793_CH_AIN2P_AIN2M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 1,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -782,7 +771,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN3P_AIN3M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -794,7 +784,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN1M_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -803,7 +794,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 0,
 			.address = AD7793_CH_TEMP,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 4,
 			.scan_type = IIO_ST('s', 24, 32, 0),
 		},
@@ -813,7 +805,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 4,
 			.address = AD7793_CH_AVDD_MONITOR,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 5,
 			.scan_type = IIO_ST('s', 24, 32, 0),
 		},
@@ -827,7 +820,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 0,
 			.channel2 = 0,
 			.address = AD7793_CH_AIN1P_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 0,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -838,7 +832,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 1,
 			.channel2 = 1,
 			.address = AD7793_CH_AIN2P_AIN2M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 1,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -849,7 +844,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN3P_AIN3M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -861,7 +857,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN1M_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -870,7 +867,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 0,
 			.address = AD7793_CH_TEMP,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 4,
 			.scan_type = IIO_ST('s', 16, 32, 0),
 		},
@@ -880,7 +878,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 4,
 			.address = AD7793_CH_AVDD_MONITOR,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 5,
 			.scan_type = IIO_ST('s', 16, 32, 0),
 		},
@@ -905,7 +904,7 @@ static int __devinit ad7793_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -989,7 +988,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -1009,7 +1008,7 @@ static int ad7793_remove(struct spi_device *spi)
 		regulator_put(st->reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
index 52b720e2b03a..c97da5b66435 100644
--- a/drivers/staging/iio/adc/ad7816.c
+++ b/drivers/staging/iio/adc/ad7816.c
@@ -16,9 +16,9 @@
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * AD7816 config masks
@@ -354,7 +354,7 @@ static int __devinit ad7816_probe(struct spi_device *spi_dev)
 		return -EINVAL;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -426,7 +426,7 @@ error_free_gpio_convert:
 error_free_gpio_rdwr:
 	gpio_free(chip->rdwr_pin);
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -443,7 +443,7 @@ static int __devexit ad7816_remove(struct spi_device *spi_dev)
 	gpio_free(chip->busy_pin);
 	gpio_free(chip->convert_pin);
 	gpio_free(chip->rdwr_pin);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7887.h b/drivers/staging/iio/adc/ad7887.h
index bc53b6532121..2e09e54fc9c5 100644
--- a/drivers/staging/iio/adc/ad7887.h
+++ b/drivers/staging/iio/adc/ad7887.h
@@ -63,7 +63,6 @@ struct ad7887_state {
 	struct spi_device		*spi;
 	const struct ad7887_chip_info	*chip_info;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	struct spi_transfer		xfer[4];
 	struct spi_message		msg[3];
diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c
index e9bbc3eed15d..7186074deeb3 100644
--- a/drivers/staging/iio/adc/ad7887_core.c
+++ b/drivers/staging/iio/adc/ad7887_core.c
@@ -15,9 +15,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 
 #include "ad7887.h"
@@ -42,7 +42,7 @@ static int ad7887_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -75,7 +75,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
 			.type = IIO_VOLTAGE,
 			.indexed = 1,
 			.channel = 1,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.address = 1,
 			.scan_index = 1,
 			.scan_type = IIO_ST('u', 12, 16, 0),
@@ -84,7 +85,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
 			.type = IIO_VOLTAGE,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.address = 0,
 			.scan_index = 0,
 			.scan_type = IIO_ST('u', 12, 16, 0),
@@ -104,7 +106,7 @@ static int __devinit ad7887_probe(struct spi_device *spi)
 	struct ad7887_platform_data *pdata = spi->dev.platform_data;
 	struct ad7887_state *st;
 	int ret, voltage_uv = 0;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -220,7 +222,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -237,7 +239,7 @@ static int ad7887_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c
index d1809079b63d..fd91384db894 100644
--- a/drivers/staging/iio/adc/ad7887_ring.c
+++ b/drivers/staging/iio/adc/ad7887_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Analog Devices Inc.
+ * Copyright 2010-2012 Analog Devices Inc.
  * Copyright (C) 2008 Jonathan Cameron
  *
  * Licensed under the GPL-2.
@@ -12,10 +12,10 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7887.h"
 
@@ -29,22 +29,11 @@
 static int ad7887_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7887_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) *
-		st->chip_info->channel[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
+	int ret;
 
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	/* We know this is a single long so can 'cheat' */
 	switch (*indio_dev->active_scan_mask) {
@@ -83,7 +72,6 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7887_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
 	s64 time_ns;
 	__u8 *buf;
 	int b_sent;
@@ -92,7 +80,7 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 					   indio_dev->masklength) *
 		st->chip_info->channel[0].scan_type.storagebits / 8;
 
-	buf = kzalloc(st->d_size, GFP_KERNEL);
+	buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
@@ -103,8 +91,8 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 	time_ns = iio_get_time_ns();
 
 	memcpy(buf, st->data, bytes);
-	if (ring->scan_timestamp)
-		memcpy(buf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(buf + indio_dev->scan_bytes - sizeof(s64),
 		       &time_ns, sizeof(time_ns));
 
 	indio_dev->buffer->access->store_to(indio_dev->buffer, buf, time_ns);
@@ -126,7 +114,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -139,7 +127,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 	/* Ring buffer functions - here trigger setup related */
 	indio_dev->setup_ops = &ad7887_ring_setup_ops;
@@ -148,8 +136,8 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -157,5 +145,5 @@ error_ret:
 void ad7887_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
index 356f690a76fb..99f8abe9731b 100644
--- a/drivers/staging/iio/adc/ad799x.h
+++ b/drivers/staging/iio/adc/ad799x.h
@@ -104,7 +104,6 @@ struct ad799x_chip_info {
 struct ad799x_state {
 	struct i2c_client		*client;
 	const struct ad799x_chip_info	*chip_info;
-	size_t				d_size;
 	struct iio_trigger		*trig;
 	struct regulator		*reg;
 	u16				int_vref_mv;
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index a8458669350f..cc637b5a36e5 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -33,10 +33,10 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "ad799x.h"
 
@@ -148,7 +148,7 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -454,6 +454,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -461,6 +462,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -468,6 +470,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -475,6 +478,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -490,6 +494,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -497,6 +502,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -504,6 +510,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -511,6 +518,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -526,6 +534,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -533,6 +542,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -540,6 +550,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -547,6 +558,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -562,6 +574,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -570,6 +583,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -587,6 +601,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -596,6 +611,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.indexed = 1,
 				.channel = 1,
 				.scan_index = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
 			},
@@ -603,6 +619,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -611,6 +628,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -628,6 +646,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -636,6 +655,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -644,6 +664,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -652,6 +673,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -669,6 +691,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -677,6 +700,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -685,6 +709,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -693,6 +718,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -701,6 +727,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 4,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 4,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -708,6 +735,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 5,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 5,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -715,6 +743,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 6,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 6,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -722,6 +751,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 7,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 7,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -738,6 +768,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -746,6 +777,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -754,6 +786,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -762,6 +795,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -770,6 +804,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 4,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 4,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -777,6 +812,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 5,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 5,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -784,6 +820,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 6,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 6,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -791,6 +828,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 7,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 7,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -809,7 +847,7 @@ static int __devinit ad799x_probe(struct i2c_client *client,
 	int ret;
 	struct ad799x_platform_data *pdata = client->dev.platform_data;
 	struct ad799x_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -882,7 +920,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -902,7 +940,7 @@ static __devexit int ad799x_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 069765cab275..1c7ff4423db4 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2010-2012 Michael Hennerich, Analog Devices Inc.
  * Copyright (C) 2008-2010 Jonathan Cameron
  *
  * This program is free software; you can redistribute it and/or modify
@@ -16,10 +16,10 @@
 #include <linux/i2c.h>
 #include <linux/bitops.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad799x.h"
 
@@ -32,9 +32,7 @@
  **/
 static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 {
-	struct iio_buffer *ring = indio_dev->buffer;
 	struct ad799x_state *st = iio_priv(indio_dev);
-
 	/*
 	 * Need to figure out the current mode based upon the requested
 	 * scan mask in iio_dev
@@ -43,21 +41,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 	if (st->id == ad7997 || st->id == ad7998)
 		ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask);
 
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) * 2;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
-
-	return 0;
+	return iio_sw_buffer_preenable(indio_dev);
 }
 
 /**
@@ -78,7 +62,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
 	int b_sent;
 	u8 cmd;
 
-	rxbuf = kmalloc(st->d_size, GFP_KERNEL);
+	rxbuf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (rxbuf == NULL)
 		goto out;
 
@@ -111,8 +95,8 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (ring->scan_timestamp)
-		memcpy(rxbuf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 
 	ring->access->store_to(indio_dev->buffer, rxbuf, time_ns);
@@ -136,7 +120,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret = 0;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -150,7 +134,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -161,8 +145,8 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -170,5 +154,5 @@ error_ret:
 void ad799x_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/adt7310.c b/drivers/staging/iio/adc/adt7310.c
index caf57c1169b1..ba4e571a112a 100644
--- a/drivers/staging/iio/adc/adt7310.c
+++ b/drivers/staging/iio/adc/adt7310.c
@@ -15,9 +15,9 @@
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 /*
  * ADT7310 registers definition
  */
@@ -753,7 +753,7 @@ static int __devinit adt7310_probe(struct spi_device *spi_dev)
 	unsigned long *adt7310_platform_data = spi_dev->dev.platform_data;
 	unsigned long irq_flags;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -833,7 +833,7 @@ error_unreg_int_irq:
 error_unreg_ct_irq:
 	free_irq(spi_dev->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -849,7 +849,7 @@ static int __devexit adt7310_remove(struct spi_device *spi_dev)
 		free_irq(adt7310_platform_data[0], indio_dev);
 	if (spi_dev->irq)
 		free_irq(spi_dev->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/adt7410.c b/drivers/staging/iio/adc/adt7410.c
index dff3e8ca2d78..2d4b5c6cd8fc 100644
--- a/drivers/staging/iio/adc/adt7410.c
+++ b/drivers/staging/iio/adc/adt7410.c
@@ -15,9 +15,9 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * ADT7410 registers definition
@@ -721,7 +721,7 @@ static int __devinit adt7410_probe(struct i2c_client *client,
 	int ret = 0;
 	unsigned long *adt7410_platform_data = client->dev.platform_data;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -797,7 +797,7 @@ error_unreg_int_irq:
 error_unreg_ct_irq:
 	free_irq(client->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -812,7 +812,7 @@ static int __devexit adt7410_remove(struct i2c_client *client)
 		free_irq(adt7410_platform_data[0], indio_dev);
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index dfc9033843a3..9690306d1f8f 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -30,9 +30,10 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/completion.h>
+#include <linux/of.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /*
  * LPC32XX registers definitions
@@ -73,7 +74,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 {
 	struct lpc32xx_adc_info *info = iio_priv(indio_dev);
 
-	if (mask == 0) {
+	if (mask == IIO_CHAN_INFO_RAW) {
 		mutex_lock(&indio_dev->mlock);
 		clk_enable(info->clk);
 		/* Measurement setup */
@@ -98,12 +99,13 @@ static const struct iio_info lpc32xx_adc_iio_info = {
 	.driver_module = THIS_MODULE,
 };
 
-#define LPC32XX_ADC_CHANNEL(_index) {		\
-	.type = IIO_VOLTAGE,			\
-	.indexed = 1,				\
-	.channel = _index,			\
-	.address = AD_IN * _index,		\
-	.scan_index = _index,			\
+#define LPC32XX_ADC_CHANNEL(_index) {			\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.channel = _index,				\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+	.address = AD_IN * _index,			\
+	.scan_index = _index,				\
 }
 
 static struct iio_chan_spec lpc32xx_adc_iio_channels[] = {
@@ -139,7 +141,7 @@ static int __devinit lpc32xx_adc_probe(struct platform_device *pdev)
 		goto errout1;
 	}
 
-	iodev = iio_allocate_device(sizeof(struct lpc32xx_adc_info));
+	iodev = iio_device_alloc(sizeof(struct lpc32xx_adc_info));
 	if (!iodev) {
 		dev_err(&pdev->dev, "failed allocating iio device\n");
 		retval = -ENOMEM;
@@ -200,7 +202,7 @@ errout4:
 errout3:
 	iounmap(info->adc_base);
 errout2:
-	iio_free_device(iodev);
+	iio_device_free(iodev);
 errout1:
 	return retval;
 }
@@ -216,17 +218,26 @@ static int __devexit lpc32xx_adc_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	clk_put(info->clk);
 	iounmap(info->adc_base);
-	iio_free_device(iodev);
+	iio_device_free(iodev);
 
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_adc_match[] = {
+	{ .compatible = "nxp,lpc3220-adc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_adc_match);
+#endif
+
 static struct platform_driver lpc32xx_adc_driver = {
 	.probe		= lpc32xx_adc_probe,
 	.remove		= __devexit_p(lpc32xx_adc_remove),
 	.driver		= {
 		.name	= MOD_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(lpc32xx_adc_match),
 	},
 };
 
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index cf3e2ca7e314..572a500d6e51 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -32,10 +32,11 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
 
 #include "max1363.h"
 
@@ -248,7 +249,7 @@ static int max1363_read_raw(struct iio_dev *indio_dev,
 	struct max1363_state *st = iio_priv(indio_dev);
 	int ret;
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = max1363_read_single_chan(indio_dev, chan, val, m);
 		if (ret < 0)
 			return ret;
@@ -281,7 +282,8 @@ static const enum max1363_modes max1363_mode_list[] = {
 #define MAX1363_EV_M						\
 	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)	\
 	 | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
-#define MAX1363_INFO_MASK IIO_CHAN_INFO_SCALE_SHARED_BIT
+#define MAX1363_INFO_MASK (IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			   IIO_CHAN_INFO_SCALE_SHARED_BIT)
 #define MAX1363_CHAN_U(num, addr, si, bits, evmask)			\
 	{								\
 		.type = IIO_VOLTAGE,					\
@@ -830,6 +832,7 @@ static struct attribute_group max1363_event_attribute_group = {
 static const struct iio_info max1238_info = {
 	.read_raw = &max1363_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = &max1363_update_scan_mode,
 };
 
 static const struct iio_info max1363_info = {
@@ -1284,11 +1287,14 @@ static int __devinit max1363_probe(struct i2c_client *client,
 	if (ret)
 		goto error_put_reg;
 
-	indio_dev = iio_allocate_device(sizeof(struct max1363_state));
+	indio_dev = iio_device_alloc(sizeof(struct max1363_state));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
 	}
+	ret = iio_map_array_register(indio_dev, client->dev.platform_data);
+	if (ret < 0)
+		goto error_free_device;
 	st = iio_priv(indio_dev);
 	st->reg = reg;
 	/* this is only used for device removal purposes */
@@ -1299,7 +1305,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
 
 	ret = max1363_alloc_scan_masks(indio_dev);
 	if (ret)
-		goto error_free_device;
+		goto error_unregister_map;
 
 	/* Estabilish that the iio_dev is a child of the i2c device */
 	indio_dev->dev.parent = &client->dev;
@@ -1349,8 +1355,10 @@ error_cleanup_ring:
 	max1363_ring_cleanup(indio_dev);
 error_free_available_scan_masks:
 	kfree(indio_dev->available_scan_masks);
+error_unregister_map:
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	regulator_disable(reg);
 error_put_reg:
@@ -1375,7 +1383,8 @@ static int max1363_remove(struct i2c_client *client)
 		regulator_disable(reg);
 		regulator_put(reg);
 	}
-	iio_free_device(indio_dev);
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
index d0a60a382930..b30201300121 100644
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ b/drivers/staging/iio/adc/max1363_ring.c
@@ -14,10 +14,10 @@
 #include <linux/i2c.h>
 #include <linux/bitops.h>
 
-#include "../iio.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 
 #include "max1363.h"
 
@@ -54,7 +54,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p)
 		d_size = numvals*2;
 	else
 		d_size = numvals;
-	if (indio_dev->buffer->scan_timestamp) {
+	if (indio_dev->scan_timestamp) {
 		d_size += sizeof(s64);
 		if (d_size % sizeof(s64))
 			d_size += sizeof(s64) - (d_size % sizeof(s64));
@@ -78,7 +78,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (indio_dev->buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
 	iio_push_to_buffer(indio_dev->buffer, rxbuf, time_ns);
 
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
new file mode 100644
index 000000000000..8c6013f0a4b3
--- /dev/null
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -0,0 +1,448 @@
+/*
+ * ST SPEAr ADC driver
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * SPEAR registers definitions
+ */
+
+#define SCAN_RATE_LO(x)		((x) & 0xFFFF)
+#define SCAN_RATE_HI(x)		(((x) >> 0x10) & 0xFFFF)
+#define CLK_LOW(x)		(((x) & 0xf) << 0)
+#define CLK_HIGH(x)		(((x) & 0xf) << 4)
+
+/* Bit definitions for SPEAR_ADC_STATUS */
+#define START_CONVERSION	(1 << 0)
+#define CHANNEL_NUM(x)		((x) << 1)
+#define ADC_ENABLE		(1 << 4)
+#define AVG_SAMPLE(x)		((x) << 5)
+#define VREF_INTERNAL		(1 << 9)
+
+#define DATA_MASK		0x03ff
+#define DATA_BITS		10
+
+#define MOD_NAME "spear-adc"
+
+#define ADC_CHANNEL_NUM		8
+
+#define CLK_MIN			2500000
+#define CLK_MAX			20000000
+
+struct adc_regs_spear3xx {
+	u32 status;
+	u32 average;
+	u32 scan_rate;
+	u32 clk;	/* Not avail for 1340 & 1310 */
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	u32 ch_data[ADC_CHANNEL_NUM];
+};
+
+struct chan_data {
+	u32 lsb;
+	u32 msb;
+};
+
+struct adc_regs_spear6xx {
+	u32 status;
+	u32 pad[2];
+	u32 clk;
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	struct chan_data ch_data[ADC_CHANNEL_NUM];
+	u32 scan_rate_lo;
+	u32 scan_rate_hi;
+	struct chan_data average;
+};
+
+struct spear_adc_info {
+	struct device_node *np;
+	struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
+	struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
+	struct clk *clk;
+	struct completion completion;
+	u32 current_clk;
+	u32 sampling_freq;
+	u32 avg_samples;
+	u32 vref_external;
+	u32 value;
+};
+
+/*
+ * Functions to access some SPEAr ADC register. Abstracted into
+ * static inline functions, because of different register offsets
+ * on different SoC variants (SPEAr300 vs SPEAr600 etc).
+ */
+static void spear_adc_set_status(struct spear_adc_info *info, u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->status);
+}
+
+static void spear_adc_set_clk(struct spear_adc_info *info, u32 val)
+{
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+
+	count = (apb_clk + val - 1) / val;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+
+	__raw_writel(CLK_LOW(clk_low) | CLK_HIGH(clk_high),
+		     &info->adc_base_spear6xx->clk);
+}
+
+static void spear_adc_set_ctrl(struct spear_adc_info *info, int n,
+			       u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->ch_ctrl[n]);
+}
+
+static u32 spear_adc_get_average(struct spear_adc_info *info)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		return __raw_readl(&info->adc_base_spear6xx->average.msb) &
+			DATA_MASK;
+	} else {
+		return __raw_readl(&info->adc_base_spear3xx->average) &
+			DATA_MASK;
+	}
+}
+
+static void spear_adc_set_scanrate(struct spear_adc_info *info, u32 rate)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		__raw_writel(SCAN_RATE_LO(rate),
+			     &info->adc_base_spear6xx->scan_rate_lo);
+		__raw_writel(SCAN_RATE_HI(rate),
+			     &info->adc_base_spear6xx->scan_rate_hi);
+	} else {
+		__raw_writel(rate, &info->adc_base_spear3xx->scan_rate);
+	}
+}
+
+static int spear_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val,
+			  int *val2,
+			  long mask)
+{
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 scale_mv;
+	u32 status;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+
+		status = CHANNEL_NUM(chan->channel) |
+			AVG_SAMPLE(info->avg_samples) |
+			START_CONVERSION | ADC_ENABLE;
+		if (info->vref_external == 0)
+			status |= VREF_INTERNAL;
+
+		spear_adc_set_status(info, status);
+		wait_for_completion(&info->completion); /* set by ISR */
+		*val = info->value;
+
+		mutex_unlock(&indio_dev->mlock);
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		scale_mv = (info->vref_external * 1000) >> DATA_BITS;
+		*val =  scale_mv / 1000;
+		*val2 = (scale_mv % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
+
+#define SPEAR_ADC_CHAN(idx) {				\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
+	.channel = idx,					\
+	.scan_type = {					\
+		.sign = 'u',				\
+		.storagebits = 16,			\
+	},						\
+}
+
+static struct iio_chan_spec spear_adc_iio_channels[] = {
+	SPEAR_ADC_CHAN(0),
+	SPEAR_ADC_CHAN(1),
+	SPEAR_ADC_CHAN(2),
+	SPEAR_ADC_CHAN(3),
+	SPEAR_ADC_CHAN(4),
+	SPEAR_ADC_CHAN(5),
+	SPEAR_ADC_CHAN(6),
+	SPEAR_ADC_CHAN(7),
+};
+
+static irqreturn_t spear_adc_isr(int irq, void *dev_id)
+{
+	struct spear_adc_info *info = (struct spear_adc_info *)dev_id;
+
+	/* Read value to clear IRQ */
+	info->value = spear_adc_get_average(info);
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_adc_configure(struct spear_adc_info *info)
+{
+	int i;
+
+	/* Reset ADC core */
+	spear_adc_set_status(info, 0);
+	__raw_writel(0, &info->adc_base_spear6xx->clk);
+	for (i = 0; i < 8; i++)
+		spear_adc_set_ctrl(info, i, 0);
+	spear_adc_set_scanrate(info, 0);
+
+	spear_adc_set_clk(info, info->sampling_freq);
+
+	return 0;
+}
+
+static ssize_t spear_adc_read_frequency(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", info->current_clk);
+}
+
+static ssize_t spear_adc_write_frequency(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+	unsigned long lval;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &lval);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	if ((lval < CLK_MIN) || (lval > CLK_MAX)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	count = (apb_clk + lval - 1) / lval;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+	spear_adc_set_clk(info, lval);
+
+out:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+			      spear_adc_read_frequency,
+			      spear_adc_write_frequency);
+
+static struct attribute *spear_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group spear_attribute_group = {
+	.attrs = spear_attributes,
+};
+
+static const struct iio_info spear_adc_iio_info = {
+	.read_raw = &spear_read_raw,
+	.attrs = &spear_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int __devinit spear_adc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct spear_adc_info *info;
+	struct iio_dev *iodev = NULL;
+	int ret = -ENODEV;
+	int irq;
+
+	iodev = iio_device_alloc(sizeof(struct spear_adc_info));
+	if (!iodev) {
+		dev_err(dev, "failed allocating iio device\n");
+		ret = -ENOMEM;
+		goto errout1;
+	}
+
+	info = iio_priv(iodev);
+	info->np = np;
+
+	/*
+	 * SPEAr600 has a different register layout than other SPEAr SoC's
+	 * (e.g. SPEAr3xx). Let's provide two register base addresses
+	 * to support multi-arch kernels.
+	 */
+	info->adc_base_spear6xx = of_iomap(np, 0);
+	if (!info->adc_base_spear6xx) {
+		dev_err(dev, "failed mapping memory\n");
+		ret = -ENOMEM;
+		goto errout2;
+	}
+	info->adc_base_spear3xx =
+		(struct adc_regs_spear3xx *)info->adc_base_spear6xx;
+
+	info->clk = clk_get(dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(dev, "failed getting clock\n");
+		goto errout3;
+	}
+
+	ret = clk_prepare(info->clk);
+	if (ret) {
+		dev_err(dev, "failed preparing clock\n");
+		goto errout4;
+	}
+
+	ret = clk_enable(info->clk);
+	if (ret) {
+		dev_err(dev, "failed enabling clock\n");
+		goto errout5;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if ((irq < 0) || (irq >= NR_IRQS)) {
+		dev_err(dev, "failed getting interrupt resource\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	ret = devm_request_irq(dev, irq, spear_adc_isr, 0, MOD_NAME, info);
+	if (ret < 0) {
+		dev_err(dev, "failed requesting interrupt\n");
+		goto errout6;
+	}
+
+	if (of_property_read_u32(np, "sampling-frequency",
+				 &info->sampling_freq)) {
+		dev_err(dev, "sampling-frequency missing in DT\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	/*
+	 * Optional avg_samples defaults to 0, resulting in single data
+	 * conversion
+	 */
+	of_property_read_u32(np, "average-samples", &info->avg_samples);
+
+	/*
+	 * Optional vref_external defaults to 0, resulting in internal vref
+	 * selection
+	 */
+	of_property_read_u32(np, "vref-external", &info->vref_external);
+
+	spear_adc_configure(info);
+
+	platform_set_drvdata(pdev, iodev);
+
+	init_completion(&info->completion);
+
+	iodev->name = MOD_NAME;
+	iodev->dev.parent = dev;
+	iodev->info = &spear_adc_iio_info;
+	iodev->modes = INDIO_DIRECT_MODE;
+	iodev->channels = spear_adc_iio_channels;
+	iodev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
+
+	ret = iio_device_register(iodev);
+	if (ret)
+		goto errout6;
+
+	dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
+
+	return 0;
+
+errout6:
+	clk_disable(info->clk);
+errout5:
+	clk_unprepare(info->clk);
+errout4:
+	clk_put(info->clk);
+errout3:
+	iounmap(info->adc_base_spear6xx);
+errout2:
+	iio_device_free(iodev);
+errout1:
+	return ret;
+}
+
+static int __devexit spear_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *iodev = platform_get_drvdata(pdev);
+	struct spear_adc_info *info = iio_priv(iodev);
+
+	iio_device_unregister(iodev);
+	platform_set_drvdata(pdev, NULL);
+	clk_disable(info->clk);
+	clk_unprepare(info->clk);
+	clk_put(info->clk);
+	iounmap(info->adc_base_spear6xx);
+	iio_device_free(iodev);
+
+	return 0;
+}
+
+static const struct of_device_id spear_adc_dt_ids[] = {
+	{ .compatible = "st,spear600-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
+
+static struct platform_driver spear_adc_driver = {
+	.probe		= spear_adc_probe,
+	.remove		= __devexit_p(spear_adc_remove),
+	.driver		= {
+		.name	= MOD_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(spear_adc_dt_ids),
+	},
+};
+
+module_platform_driver(spear_adc_driver);
+
+MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
+MODULE_DESCRIPTION("SPEAr ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index fd6a45444058..5aba804237ce 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -19,9 +19,9 @@
 #include <linux/rtc.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../events.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/events.h>
+#include <linux/iio/sysfs.h>
 #include "adt7316.h"
 
 /*
@@ -2133,7 +2133,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	unsigned short *adt7316_platform_data = dev->platform_data;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -2210,7 +2210,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 error_unreg_irq:
 	free_irq(chip->bus.irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -2224,7 +2224,7 @@ int __devexit adt7316_remove(struct device *dev)
 	iio_device_unregister(indio_dev);
 	if (chip->bus.irq)
 		free_irq(chip->bus.irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index e4a08dc9b6f5..14470764fa0b 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -13,9 +13,9 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 /*
  * AD7150 registers definition
  */
@@ -104,7 +104,7 @@ static int ad7150_read_raw(struct iio_dev *indio_dev,
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = i2c_smbus_read_word_data(chip->client,
 					ad7150_addresses[chan->channel][0]);
 		if (ret < 0)
@@ -429,7 +429,8 @@ static const struct iio_chan_spec ad7150_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
 		.event_mask =
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
@@ -441,7 +442,8 @@ static const struct iio_chan_spec ad7150_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
 		.event_mask =
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
@@ -556,7 +558,7 @@ static int __devinit ad7150_probe(struct i2c_client *client,
 	struct ad7150_chip_info *chip;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -619,7 +621,7 @@ error_free_irq:
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -635,7 +637,7 @@ static int __devexit ad7150_remove(struct i2c_client *client)
 	if (client->dev.platform_data)
 		free_irq(*(unsigned int *)client->dev.platform_data, indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c
index fdb83c35e6dd..195d90748633 100644
--- a/drivers/staging/iio/cdc/ad7152.c
+++ b/drivers/staging/iio/cdc/ad7152.c
@@ -15,8 +15,8 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /*
  * TODO: Check compliance of calibbias with abi (units)
@@ -329,7 +329,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* First set whether in differential mode */
 
 		regval = chip->setup[chan->channel];
@@ -436,7 +436,8 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
@@ -445,14 +446,16 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.channel2 = 2,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
@@ -461,7 +464,8 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.channel2 = 3,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}
@@ -477,7 +481,7 @@ static int __devinit ad7152_probe(struct i2c_client *client,
 	struct ad7152_chip_info *chip;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -509,7 +513,7 @@ static int __devinit ad7152_probe(struct i2c_client *client,
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -519,7 +523,7 @@ static int __devexit ad7152_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 40b8512cbc32..e936831d5c96 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/stat.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "ad7746.h"
 
@@ -123,7 +123,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_EXT_VIN,
 	},
@@ -132,7 +133,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_VDD_MON,
 	},
@@ -140,7 +142,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.processed_val = IIO_PROCESSED,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_INT_TEMP,
 	},
@@ -148,7 +150,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 1,
-		.processed_val = IIO_PROCESSED,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_EXT_TEMP,
 	},
@@ -156,7 +158,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -168,7 +171,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.channel2 = 2,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -179,7 +183,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -192,7 +197,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.channel2 = 3,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -572,7 +578,8 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		ret = ad7746_select_channel(indio_dev, chan);
 		if (ret < 0)
 			goto out;
@@ -696,7 +703,7 @@ static int __devinit ad7746_probe(struct i2c_client *client,
 	int ret = 0;
 	unsigned char regval = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -756,7 +763,7 @@ static int __devinit ad7746_probe(struct i2c_client *client,
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -766,7 +773,7 @@ static int __devexit ad7746_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/Kconfig b/drivers/staging/iio/dac/Kconfig
index a57803a5d1a7..a626f03871ec 100644
--- a/drivers/staging/iio/dac/Kconfig
+++ b/drivers/staging/iio/dac/Kconfig
@@ -56,12 +56,12 @@ config AD5624R_SPI
 	  AD5664R converters (DAC). This driver uses the common SPI interface.
 
 config AD5446
-	tristate "Analog Devices AD5444/6, AD5620/40/60 and AD5542A/12A DAC SPI driver"
+	tristate "Analog Devices AD5446 and similar single channel DACs driver"
 	depends on SPI
 	help
 	  Say yes here to build support for Analog Devices AD5444, AD5446,
-	  AD5512A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620, AD5621,
-	  AD5640, AD5660, AD5662 DACs.
+	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620,
+	  AD5621, AD5640, AD5660, AD5662 DACs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5446.
diff --git a/drivers/staging/iio/dac/ad5064.c b/drivers/staging/iio/dac/ad5064.c
index 06b162745a3e..047148aa66b2 100644
--- a/drivers/staging/iio/dac/ad5064.c
+++ b/drivers/staging/iio/dac/ad5064.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5064_MAX_DAC_CHANNELS			8
@@ -144,14 +144,14 @@ static const char ad5064_powerdown_modes[][15] = {
 };
 
 static ssize_t ad5064_read_powerdown_mode_available(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	return sprintf(buf, "%s %s %s\n", ad5064_powerdown_modes[1],
 		ad5064_powerdown_modes[2], ad5064_powerdown_modes[3]);
 }
 
 static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 
@@ -160,7 +160,8 @@ static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, const char *buf, size_t len)
+	uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+	size_t len)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 	unsigned int mode, i;
@@ -187,7 +188,7 @@ static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 
@@ -195,7 +196,8 @@ static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_write_dac_powerdown(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, const char *buf, size_t len)
+	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+	 size_t len)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 	bool pwr_down;
@@ -235,7 +237,7 @@ static int ad5064_read_raw(struct iio_dev *indio_dev,
 	int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		*val = st->dac_cache[chan->channel];
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
@@ -260,7 +262,7 @@ static int ad5064_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val > (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -308,7 +310,8 @@ static struct iio_chan_spec_ext_info ad5064_ext_info[] = {
 	.indexed = 1,						\
 	.output = 1,						\
 	.channel = (chan),					\
-	.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,	\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	IIO_CHAN_INFO_SCALE_SEPARATE_BIT,			\
 	.address = AD5064_ADDR_DAC(chan),			\
 	.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)),	\
 	.ext_info = ad5064_ext_info,				\
@@ -442,7 +445,7 @@ static int __devinit ad5064_probe(struct spi_device *spi)
 	unsigned int i;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return  -ENOMEM;
 
@@ -499,7 +502,7 @@ error_free_reg:
 	if (!st->use_internal_vref)
 		regulator_bulk_free(ad5064_num_vref(st), st->vref_reg);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -517,7 +520,7 @@ static int __devexit ad5064_remove(struct spi_device *spi)
 		regulator_bulk_free(ad5064_num_vref(st), st->vref_reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5360.c b/drivers/staging/iio/dac/ad5360.c
index cec3693b50a3..26cac42dcca9 100644
--- a/drivers/staging/iio/dac/ad5360.c
+++ b/drivers/staging/iio/dac/ad5360.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5360_CMD(x)				((x) << 22)
@@ -103,7 +103,8 @@ enum ad5360_type {
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT |	\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,	\
@@ -319,7 +320,7 @@ static int ad5360_write_raw(struct iio_dev *indio_dev,
 	unsigned int ofs_index;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 
@@ -376,7 +377,7 @@ static int ad5360_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5360_read(indio_dev, AD5360_READBACK_X1A,
 			chan->address);
 		if (ret < 0)
@@ -464,7 +465,7 @@ static int __devinit ad5360_probe(struct spi_device *spi)
 	unsigned int i;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return  -ENOMEM;
@@ -519,7 +520,7 @@ error_free_reg:
 error_free_channels:
 	kfree(indio_dev->channels);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -536,7 +537,7 @@ static int __devexit ad5360_remove(struct spi_device *spi)
 	regulator_bulk_disable(st->chip_info->num_vrefs, st->vref_reg);
 	regulator_bulk_free(st->chip_info->num_vrefs, st->vref_reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5380.c b/drivers/staging/iio/dac/ad5380.c
index 4c50716fa801..4afb099fa5dd 100644
--- a/drivers/staging/iio/dac/ad5380.c
+++ b/drivers/staging/iio/dac/ad5380.c
@@ -18,8 +18,8 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 
@@ -85,7 +85,8 @@ enum ad5380_type {
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,		\
 	.scan_type = IIO_ST('u', (_bits), 16, 14 - (_bits))	\
@@ -292,7 +293,7 @@ static int ad5380_write_raw(struct iio_dev *indio_dev,
 	struct ad5380_state *st = iio_priv(indio_dev);
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_CALIBSCALE:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
@@ -322,7 +323,7 @@ static int ad5380_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_CALIBSCALE:
 		ret = regmap_read(st->regmap, ad5380_info_to_reg(chan, info),
 					val);
@@ -388,7 +389,7 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap,
 	unsigned int ctrl = 0;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(dev, "Failed to allocate iio device\n");
 		ret = -ENOMEM;
@@ -454,7 +455,7 @@ error_free_reg:
 
 	kfree(indio_dev->channels);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_regmap_exit:
 	regmap_exit(regmap);
 
@@ -476,7 +477,7 @@ static int __devexit ad5380_remove(struct device *dev)
 	}
 
 	regmap_exit(st->regmap);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5421.c b/drivers/staging/iio/dac/ad5421.c
index 0b040b204697..ffbd4c234f57 100644
--- a/drivers/staging/iio/dac/ad5421.c
+++ b/drivers/staging/iio/dac/ad5421.c
@@ -16,9 +16,9 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "dac.h"
 #include "ad5421.h"
 
@@ -87,7 +87,8 @@ static const struct iio_chan_spec ad5421_channels[] = {
 		.indexed = 1,
 		.output = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT |
 			IIO_CHAN_INFO_OFFSET_SHARED_BIT |
 			IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
@@ -304,7 +305,7 @@ static int ad5421_read_raw(struct iio_dev *indio_dev,
 		return -EINVAL;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
 		if (ret < 0)
 			return ret;
@@ -340,7 +341,7 @@ static int ad5421_write_raw(struct iio_dev *indio_dev,
 	const unsigned int max_val = 1 << 16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 
@@ -456,7 +457,7 @@ static int __devinit ad5421_probe(struct spi_device *spi)
 	struct ad5421_state *st;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return  -ENOMEM;
@@ -511,7 +512,7 @@ error_free_irq:
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -523,7 +524,7 @@ static int __devexit ad5421_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5446.c b/drivers/staging/iio/dac/ad5446.c
index 633ffbb21814..daa65b384c13 100644
--- a/drivers/staging/iio/dac/ad5446.c
+++ b/drivers/staging/iio/dac/ad5446.c
@@ -18,229 +18,212 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #include "ad5446.h"
 
-static void ad5446_store_sample(struct ad5446_state *st, unsigned val)
+static int ad5446_write(struct ad5446_state *st, unsigned val)
 {
-	st->data.d16 = cpu_to_be16(AD5446_LOAD | val);
+	__be16 data = cpu_to_be16(val);
+	return spi_write(st->spi, &data, sizeof(data));
 }
 
-static void ad5542_store_sample(struct ad5446_state *st, unsigned val)
+static int ad5660_write(struct ad5446_state *st, unsigned val)
 {
-	st->data.d16 = cpu_to_be16(val);
-}
+	uint8_t data[3];
 
-static void ad5620_store_sample(struct ad5446_state *st, unsigned val)
-{
-	st->data.d16 = cpu_to_be16(AD5620_LOAD | val);
-}
+	data[0] = (val >> 16) & 0xFF;
+	data[1] = (val >> 8) & 0xFF;
+	data[2] = val & 0xFF;
 
-static void ad5660_store_sample(struct ad5446_state *st, unsigned val)
-{
-	val |= AD5660_LOAD;
-	st->data.d24[0] = (val >> 16) & 0xFF;
-	st->data.d24[1] = (val >> 8) & 0xFF;
-	st->data.d24[2] = val & 0xFF;
+	return spi_write(st->spi, data, sizeof(data));
 }
 
-static void ad5620_store_pwr_down(struct ad5446_state *st, unsigned mode)
-{
-	st->data.d16 = cpu_to_be16(mode << 14);
-}
+static const char * const ad5446_powerdown_modes[] = {
+	"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"
+};
 
-static void ad5660_store_pwr_down(struct ad5446_state *st, unsigned mode)
+static ssize_t ad5446_read_powerdown_mode_available(struct iio_dev *indio_dev,
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
-	unsigned val = mode << 16;
-
-	st->data.d24[0] = (val >> 16) & 0xFF;
-	st->data.d24[1] = (val >> 8) & 0xFF;
-	st->data.d24[2] = val & 0xFF;
+	return sprintf(buf, "%s %s %s\n", ad5446_powerdown_modes[1],
+		ad5446_powerdown_modes[2], ad5446_powerdown_modes[3]);
 }
 
-static ssize_t ad5446_write_powerdown_mode(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t len)
+static ssize_t ad5446_write_powerdown_mode(struct iio_dev *indio_dev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
+					    const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
+	int i;
 
-	if (sysfs_streq(buf, "1kohm_to_gnd"))
-		st->pwr_down_mode = MODE_PWRDWN_1k;
-	else if (sysfs_streq(buf, "100kohm_to_gnd"))
-		st->pwr_down_mode = MODE_PWRDWN_100k;
-	else if (sysfs_streq(buf, "three_state"))
-		st->pwr_down_mode = MODE_PWRDWN_TRISTATE;
-	else
+	for (i = 1; i < ARRAY_SIZE(ad5446_powerdown_modes); i++) {
+		if (sysfs_streq(buf, ad5446_powerdown_modes[i])) {
+			st->pwr_down_mode = i;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(ad5446_powerdown_modes))
 		return -EINVAL;
 
 	return len;
 }
 
-static ssize_t ad5446_read_powerdown_mode(struct device *dev,
-				      struct device_attribute *attr, char *buf)
+static ssize_t ad5446_read_powerdown_mode(struct iio_dev *indio_dev,
+					   uintptr_t private,
+					   const struct iio_chan_spec *chan,
+					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
 
-	char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"};
-
-	return sprintf(buf, "%s\n", mode[st->pwr_down_mode]);
+	return sprintf(buf, "%s\n", ad5446_powerdown_modes[st->pwr_down_mode]);
 }
 
-static ssize_t ad5446_read_dac_powerdown(struct device *dev,
-					   struct device_attribute *attr,
+static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev,
+					   uintptr_t private,
+					   const struct iio_chan_spec *chan,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", st->pwr_down);
 }
 
-static ssize_t ad5446_write_dac_powerdown(struct device *dev,
-					    struct device_attribute *attr,
+static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
 					    const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
-	unsigned long readin;
+	unsigned int shift;
+	unsigned int val;
+	bool powerdown;
 	int ret;
 
-	ret = strict_strtol(buf, 10, &readin);
+	ret = strtobool(buf, &powerdown);
 	if (ret)
 		return ret;
 
-	if (readin > 1)
-		ret = -EINVAL;
-
 	mutex_lock(&indio_dev->mlock);
-	st->pwr_down = readin;
+	st->pwr_down = powerdown;
 
-	if (st->pwr_down)
-		st->chip_info->store_pwr_down(st, st->pwr_down_mode);
-	else
-		st->chip_info->store_sample(st, st->cached_val);
+	if (st->pwr_down) {
+		shift = chan->scan_type.realbits + chan->scan_type.shift;
+		val = st->pwr_down_mode << shift;
+	} else {
+		val = st->cached_val;
+	}
 
-	ret = spi_sync(st->spi, &st->msg);
+	ret = st->chip_info->write(st, val);
 	mutex_unlock(&indio_dev->mlock);
 
 	return ret ? ret : len;
 }
 
-static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO | S_IWUSR,
-			ad5446_read_powerdown_mode,
-			ad5446_write_powerdown_mode, 0);
-
-static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
-			"1kohm_to_gnd 100kohm_to_gnd three_state");
-
-static IIO_DEVICE_ATTR(out_voltage0_powerdown, S_IRUGO | S_IWUSR,
-			ad5446_read_dac_powerdown,
-			ad5446_write_dac_powerdown, 0);
-
-static struct attribute *ad5446_attributes[] = {
-	&iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
-	&iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr,
-	&iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad5446_attribute_group = {
-	.attrs = ad5446_attributes,
+static const struct iio_chan_spec_ext_info ad5064_ext_info_powerdown[] = {
+	{
+		.name = "powerdown",
+		.read = ad5446_read_dac_powerdown,
+		.write = ad5446_write_dac_powerdown,
+	}, {
+		.name = "powerdown_mode",
+		.read = ad5446_read_powerdown_mode,
+		.write = ad5446_write_powerdown_mode,
+	}, {
+		.name = "powerdown_mode_available",
+		.shared = true,
+		.read = ad5446_read_powerdown_mode_available,
+	},
+	{ },
 };
 
-#define AD5446_CHANNEL(bits, storage, shift) { \
+#define _AD5446_CHANNEL(bits, storage, shift, ext) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
 	.output = 1, \
 	.channel = 0, \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
-	.scan_type = IIO_ST('u', (bits), (storage), (shift)) \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,	\
+	.scan_type = IIO_ST('u', (bits), (storage), (shift)), \
+	.ext_info = (ext), \
 }
 
+#define AD5446_CHANNEL(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, NULL)
+
+#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, ad5064_ext_info_powerdown)
+
 static const struct ad5446_chip_info ad5446_chip_info_tbl[] = {
 	[ID_AD5444] = {
 		.channel = AD5446_CHANNEL(12, 16, 2),
-		.store_sample = ad5446_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5446] = {
 		.channel = AD5446_CHANNEL(14, 16, 0),
-		.store_sample = ad5446_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5541A] = {
 		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
-	},
-	[ID_AD5542A] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
-	},
-	[ID_AD5543] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5512A] = {
 		.channel = AD5446_CHANNEL(12, 16, 4),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5553] = {
 		.channel = AD5446_CHANNEL(14, 16, 0),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5601] = {
-		.channel = AD5446_CHANNEL(8, 16, 6),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
+		.write = ad5446_write,
 	},
 	[ID_AD5611] = {
-		.channel = AD5446_CHANNEL(10, 16, 4),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
+		.write = ad5446_write,
 	},
 	[ID_AD5621] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.write = ad5446_write,
 	},
 	[ID_AD5620_2500] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 2500,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5620_1250] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 1250,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5640_2500] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
 		.int_vref_mv = 2500,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5640_1250] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
 		.int_vref_mv = 1250,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5660_2500] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
 		.int_vref_mv = 2500,
-		.store_sample = ad5660_store_sample,
-		.store_pwr_down = ad5660_store_pwr_down,
+		.write = ad5660_write,
 	},
 	[ID_AD5660_1250] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
 		.int_vref_mv = 1250,
-		.store_sample = ad5660_store_sample,
-		.store_pwr_down = ad5660_store_pwr_down,
+		.write = ad5660_write,
+	},
+	[ID_AD5662] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.write = ad5660_write,
 	},
 };
 
@@ -254,6 +237,9 @@ static int ad5446_read_raw(struct iio_dev *indio_dev,
 	unsigned long scale_uv;
 
 	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		*val = st->cached_val;
+		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
 		*val =  scale_uv / 1000;
@@ -271,18 +257,18 @@ static int ad5446_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct ad5446_state *st = iio_priv(indio_dev);
-	int ret;
+	int ret = 0;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
 		val <<= chan->scan_type.shift;
 		mutex_lock(&indio_dev->mlock);
 		st->cached_val = val;
-		st->chip_info->store_sample(st, val);
-		ret = spi_sync(st->spi, &st->msg);
+		if (!st->pwr_down)
+			ret = st->chip_info->write(st, val);
 		mutex_unlock(&indio_dev->mlock);
 		break;
 	default:
@@ -295,13 +281,6 @@ static int ad5446_write_raw(struct iio_dev *indio_dev,
 static const struct iio_info ad5446_info = {
 	.read_raw = ad5446_read_raw,
 	.write_raw = ad5446_write_raw,
-	.attrs = &ad5446_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static const struct iio_info ad5446_info_no_pwr_down = {
-	.read_raw = ad5446_read_raw,
-	.write_raw = ad5446_write_raw,
 	.driver_module = THIS_MODULE,
 };
 
@@ -321,7 +300,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 		voltage_uv = regulator_get_voltage(reg);
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -337,38 +316,17 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 	/* Establish that the iio_dev is a child of the spi device */
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
-	if (st->chip_info->store_pwr_down)
-		indio_dev->info = &ad5446_info;
-	else
-		indio_dev->info = &ad5446_info_no_pwr_down;
+	indio_dev->info = &ad5446_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &st->chip_info->channel;
 	indio_dev->num_channels = 1;
 
-	/* Setup default message */
-
-	st->xfer.tx_buf = &st->data;
-	st->xfer.len = st->chip_info->channel.scan_type.storagebits / 8;
-
-	spi_message_init(&st->msg);
-	spi_message_add_tail(&st->xfer, &st->msg);
-
-	switch (spi_get_device_id(spi)->driver_data) {
-	case ID_AD5620_2500:
-	case ID_AD5620_1250:
-	case ID_AD5640_2500:
-	case ID_AD5640_1250:
-	case ID_AD5660_2500:
-	case ID_AD5660_1250:
+	if (st->chip_info->int_vref_mv)
 		st->vref_mv = st->chip_info->int_vref_mv;
-		break;
-	default:
-		if (voltage_uv)
-			st->vref_mv = voltage_uv / 1000;
-		else
-			dev_warn(&spi->dev,
-				 "reference voltage unspecified\n");
-	}
+	else if (voltage_uv)
+		st->vref_mv = voltage_uv / 1000;
+	else
+		dev_warn(&spi->dev, "reference voltage unspecified\n");
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -377,7 +335,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -398,7 +356,7 @@ static int ad5446_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
@@ -408,8 +366,8 @@ static const struct spi_device_id ad5446_id[] = {
 	{"ad5446", ID_AD5446},
 	{"ad5512a", ID_AD5512A},
 	{"ad5541a", ID_AD5541A},
-	{"ad5542a", ID_AD5542A},
-	{"ad5543", ID_AD5543},
+	{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
+	{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
 	{"ad5553", ID_AD5553},
 	{"ad5601", ID_AD5601},
 	{"ad5611", ID_AD5611},
@@ -420,6 +378,7 @@ static const struct spi_device_id ad5446_id[] = {
 	{"ad5640-1250", ID_AD5640_1250},
 	{"ad5660-2500", ID_AD5660_2500},
 	{"ad5660-1250", ID_AD5660_1250},
+	{"ad5662", ID_AD5662},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad5446_id);
diff --git a/drivers/staging/iio/dac/ad5446.h b/drivers/staging/iio/dac/ad5446.h
index 4ea3476fb065..dfd68ce7427e 100644
--- a/drivers/staging/iio/dac/ad5446.h
+++ b/drivers/staging/iio/dac/ad5446.h
@@ -34,43 +34,30 @@
  * @spi:		spi_device
  * @chip_info:		chip model specific constants, available modes etc
  * @reg:		supply regulator
- * @poll_work:		bottom half of polling interrupt handler
  * @vref_mv:		actual reference voltage used
- * @xfer:		default spi transfer
- * @msg:		default spi message
- * @data:		spi transmit buffer
  */
 
 struct ad5446_state {
 	struct spi_device		*spi;
 	const struct ad5446_chip_info	*chip_info;
 	struct regulator		*reg;
-	struct work_struct		poll_work;
 	unsigned short			vref_mv;
 	unsigned			cached_val;
 	unsigned			pwr_down_mode;
 	unsigned			pwr_down;
-	struct spi_transfer		xfer;
-	struct spi_message		msg;
-	union {
-		unsigned short		d16;
-		unsigned char		d24[3];
-	} data;
 };
 
 /**
  * struct ad5446_chip_info - chip specific information
  * @channel:		channel spec for the DAC
  * @int_vref_mv:	AD5620/40/60: the internal reference voltage
- * @store_sample:	chip specific helper function to store the datum
- * @store_sample:	chip specific helper function to store the powerpown cmd
+ * @write:		chip specific helper function to write to the register
  */
 
 struct ad5446_chip_info {
 	struct iio_chan_spec	channel;
 	u16			int_vref_mv;
-	void (*store_sample)	(struct ad5446_state *st, unsigned val);
-	void (*store_pwr_down)	(struct ad5446_state *st, unsigned mode);
+	int			(*write)(struct ad5446_state *st, unsigned val);
 };
 
 /**
@@ -85,8 +72,6 @@ enum ad5446_supported_device_ids {
 	ID_AD5444,
 	ID_AD5446,
 	ID_AD5541A,
-	ID_AD5542A,
-	ID_AD5543,
 	ID_AD5512A,
 	ID_AD5553,
 	ID_AD5601,
@@ -98,6 +83,7 @@ enum ad5446_supported_device_ids {
 	ID_AD5640_1250,
 	ID_AD5660_2500,
 	ID_AD5660_1250,
+	ID_AD5662,
 };
 
 #endif /* IIO_DAC_AD5446_H_ */
diff --git a/drivers/staging/iio/dac/ad5504.c b/drivers/staging/iio/dac/ad5504.c
index bc17205fe722..e47f4d0967b4 100644
--- a/drivers/staging/iio/dac/ad5504.c
+++ b/drivers/staging/iio/dac/ad5504.c
@@ -16,9 +16,9 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "dac.h"
 #include "ad5504.h"
 
@@ -27,7 +27,8 @@
 	.indexed = 1, \
 	.output = 1, \
 	.channel = (_chan), \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+		     IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 	.address = AD5504_ADDR_DAC(_chan), \
 	.scan_type = IIO_ST('u', 12, 16, 0), \
 }
@@ -81,7 +82,7 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5504_spi_read(st->spi, chan->address);
 		if (ret < 0)
 			return ret;
@@ -109,7 +110,7 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -287,7 +288,7 @@ static int __devinit ad5504_probe(struct spi_device *spi)
 	struct regulator *reg;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -350,7 +351,7 @@ error_put_reg:
 	if (!IS_ERR(reg))
 		regulator_put(reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -368,7 +369,7 @@ static int __devexit ad5504_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5624r_spi.c b/drivers/staging/iio/dac/ad5624r_spi.c
index 10c7484366ef..cde4a9f8d897 100644
--- a/drivers/staging/iio/dac/ad5624r_spi.c
+++ b/drivers/staging/iio/dac/ad5624r_spi.c
@@ -16,8 +16,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 #include "ad5624r.h"
 
@@ -26,7 +26,8 @@
 	.indexed = 1, \
 	.output = 1, \
 	.channel = (_chan), \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+		     IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 	.address = (_chan), \
 	.scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)), \
 }
@@ -122,7 +123,7 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -255,7 +256,7 @@ static int __devinit ad5624r_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -305,7 +306,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 
 	return ret;
@@ -321,7 +322,7 @@ static int __devexit ad5624r_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c
index 2415a6e60c77..6a74436af594 100644
--- a/drivers/staging/iio/dac/ad5686.c
+++ b/drivers/staging/iio/dac/ad5686.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5686_DAC_CHANNELS			4
@@ -98,7 +98,8 @@ enum ad5686_supported_device_ids {
 		.indexed = 1,					\
 		.output = 1,					\
 		.channel = chan,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
 		.address = AD5686_ADDR_DAC(chan),			\
 		.scan_type = IIO_ST('u', bits, 16, shift)	\
 }
@@ -296,7 +297,7 @@ static int ad5686_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = ad5686_spi_read(st, chan->address);
 		mutex_unlock(&indio_dev->mlock);
@@ -326,7 +327,7 @@ static int ad5686_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val > (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -358,7 +359,7 @@ static int __devinit ad5686_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, regdone = 0, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return  -ENOMEM;
 
@@ -410,7 +411,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -425,7 +426,7 @@ static int __devexit ad5686_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5764.c b/drivers/staging/iio/dac/ad5764.c
index f73a73079490..03dbd937b081 100644
--- a/drivers/staging/iio/dac/ad5764.c
+++ b/drivers/staging/iio/dac/ad5764.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5764_REG_SF_NOP			0x0
@@ -79,7 +79,8 @@ enum ad5764_type {
 	.output = 1,						\
 	.channel = (_chan),					\
 	.address = (_chan),					\
-	.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |		\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_OFFSET_SHARED_BIT |		\
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,		\
@@ -188,7 +189,7 @@ static int ad5764_write_raw(struct iio_dev *indio_dev,
 	unsigned int reg;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 		val <<= chan->scan_type.shift;
@@ -228,7 +229,7 @@ static int ad5764_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		reg = AD5764_REG_DATA(chan->address);
 		ret = ad5764_read(indio_dev, reg, val);
 		if (ret < 0)
@@ -280,7 +281,7 @@ static int __devinit ad5764_probe(struct spi_device *spi)
 	struct ad5764_state *st;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return -ENOMEM;
@@ -335,7 +336,7 @@ error_free_reg:
 	if (st->chip_info->int_vref == 0)
 		regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -352,7 +353,7 @@ static int __devexit ad5764_remove(struct spi_device *spi)
 		regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c
index ac45636a8d72..1cc75e6cd901 100644
--- a/drivers/staging/iio/dac/ad5791.c
+++ b/drivers/staging/iio/dac/ad5791.c
@@ -17,8 +17,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 #include "ad5791.h"
 
@@ -78,7 +78,8 @@ static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val)
 	.indexed = 1,					\
 	.address = AD5791_ADDR_DAC0,			\
 	.channel = 0,					\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |	\
 		IIO_CHAN_INFO_OFFSET_SHARED_BIT,	\
 	.scan_type = IIO_ST('u', bits, 24, shift)	\
 }
@@ -231,7 +232,7 @@ static int ad5791_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5791_spi_read(st->spi, chan->address, val);
 		if (ret)
 			return ret;
@@ -263,7 +264,7 @@ static int ad5791_write_raw(struct iio_dev *indio_dev,
 	struct ad5791_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		val &= AD5791_RES_MASK(chan->scan_type.realbits);
 		val <<= chan->scan_type.shift;
 
@@ -288,7 +289,7 @@ static int __devinit ad5791_probe(struct spi_device *spi)
 	struct ad5791_state *st;
 	int ret, pos_voltage_uv = 0, neg_voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -368,7 +369,7 @@ error_put_reg_neg:
 error_put_reg_pos:
 	if (!IS_ERR(st->reg_vdd))
 		regulator_put(st->reg_vdd);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 
 	return ret;
@@ -389,7 +390,7 @@ static int __devexit ad5791_remove(struct spi_device *spi)
 		regulator_disable(st->reg_vss);
 		regulator_put(st->reg_vss);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/max517.c b/drivers/staging/iio/dac/max517.c
index 41483c72cec1..a3f588dfdbfb 100644
--- a/drivers/staging/iio/dac/max517.c
+++ b/drivers/staging/iio/dac/max517.c
@@ -25,8 +25,8 @@
 #include <linux/i2c.h>
 #include <linux/err.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #include "max517.h"
@@ -218,7 +218,7 @@ static int max517_probe(struct i2c_client *client,
 	struct max517_platform_data *platform_data = client->dev.platform_data;
 	int err;
 
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit;
@@ -257,14 +257,14 @@ static int max517_probe(struct i2c_client *client,
 	return 0;
 
 exit_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
 
 static int max517_remove(struct i2c_client *client)
 {
-	iio_free_device(i2c_get_clientdata(client));
+	iio_device_free(i2c_get_clientdata(client));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/dds.h b/drivers/staging/iio/dds/dds.h
deleted file mode 100644
index d8ac3a93baf6..000000000000
--- a/drivers/staging/iio/dds/dds.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * dds.h - sysfs attributes associated with DDS devices
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqY
- */
-
-#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_freq##_num,			\
-			_mode, _show, _store, _addr)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqY_scale
- */
-
-#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string)			\
-	IIO_CONST_ATTR(dds##_channel##_freq_scale, _string)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqsymbol
- */
-
-#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_freqsymbol,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phaseY
- */
-
-#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_phase##_num,			\
-			_mode, _show, _store, _addr)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phaseY_scale
- */
-
-#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string)			\
-	IIO_CONST_ATTR(dds##_channel##_phase_scale, _string)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phasesymbol
- */
-
-#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_phasesymbol,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_en,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_freq_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_freq_en,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_phase_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_phase_en,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_out_enable
- */
-
-#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_out_enable,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_enable
- */
-
-#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output,			\
-			_mode, _show, _store, _addr)			\
-	IIO_DEVICE_ATTR(dds##_channel##_out##_output##_enable,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_wavetype
- */
-
-#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_out##_output##_wavetype,	\
-			S_IWUSR, NULL, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_wavetype_available
- */
-
-#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\
-	IIO_CONST_ATTR(dds##_channel##_out##_output##_wavetype_available,\
-			_modes);
diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/frequency/Kconfig
index 93b7141b2c1f..93b7141b2c1f 100644
--- a/drivers/staging/iio/dds/Kconfig
+++ b/drivers/staging/iio/frequency/Kconfig
diff --git a/drivers/staging/iio/dds/Makefile b/drivers/staging/iio/frequency/Makefile
index 147746176b9b..147746176b9b 100644
--- a/drivers/staging/iio/dds/Makefile
+++ b/drivers/staging/iio/frequency/Makefile
diff --git a/drivers/staging/iio/dds/ad5930.c b/drivers/staging/iio/frequency/ad5930.c
index 9c32d1beae25..97542fc9bf22 100644
--- a/drivers/staging/iio/dds/ad5930.c
+++ b/drivers/staging/iio/frequency/ad5930.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad5930"
 
@@ -97,7 +97,7 @@ static int __devinit ad5930_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -122,7 +122,7 @@ static int __devinit ad5930_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -130,7 +130,7 @@ error_ret:
 static int __devexit ad5930_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index 2ccf25dd9289..2f9abac7c41c 100644
--- a/drivers/staging/iio/dds/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dds.h"
 
 #include "ad9832.h"
@@ -177,18 +177,18 @@ static IIO_DEV_ATTR_OUT_ENABLE(0, S_IWUSR, NULL,
 				ad9832_write, AD9832_OUTPUT_EN);
 
 static struct attribute *ad9832_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_dev_attr_dds0_phase2.dev_attr.attr,
-	&iio_dev_attr_dds0_phase3.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_pincontrol_en.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase2.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase3.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
 	NULL,
 };
 
@@ -221,7 +221,7 @@ static int __devinit ad9832_probe(struct spi_device *spi)
 			goto error_put_reg;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -313,7 +313,7 @@ static int __devinit ad9832_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -334,7 +334,7 @@ static int __devexit ad9832_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9832.h b/drivers/staging/iio/frequency/ad9832.h
index c5b701f8aabb..c5b701f8aabb 100644
--- a/drivers/staging/iio/dds/ad9832.h
+++ b/drivers/staging/iio/frequency/ad9832.h
diff --git a/drivers/staging/iio/dds/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 38a2de08626f..f4b581f20b42 100644
--- a/drivers/staging/iio/dds/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -19,8 +19,8 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dds.h"
 
 #include "ad9834.h"
@@ -218,7 +218,7 @@ static ssize_t ad9834_show_out0_wavetype_available(struct device *dev,
 }
 
 
-static IIO_DEVICE_ATTR(dds0_out0_wavetype_available, S_IRUGO,
+static IIO_DEVICE_ATTR(out_altvoltage0_out0_wavetype_available, S_IRUGO,
 		       ad9834_show_out0_wavetype_available, NULL, 0);
 
 static ssize_t ad9834_show_out1_wavetype_available(struct device *dev,
@@ -237,7 +237,7 @@ static ssize_t ad9834_show_out1_wavetype_available(struct device *dev,
 	return sprintf(buf, "%s\n", str);
 }
 
-static IIO_DEVICE_ATTR(dds0_out1_wavetype_available, S_IRUGO,
+static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, S_IRUGO,
 		       ad9834_show_out1_wavetype_available, NULL, 0);
 
 /**
@@ -263,36 +263,36 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
 static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
 
 static struct attribute *ad9834_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_pincontrol_en.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_wavetype_available.dev_attr.attr,
 	NULL,
 };
 
 static struct attribute *ad9833_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr,
 	NULL,
 };
 
@@ -334,7 +334,7 @@ static int __devinit ad9834_probe(struct spi_device *spi)
 			goto error_put_reg;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -414,7 +414,7 @@ static int __devinit ad9834_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -434,7 +434,7 @@ static int __devexit ad9834_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9834.h b/drivers/staging/iio/frequency/ad9834.h
index ed5ed8d0007f..ed5ed8d0007f 100644
--- a/drivers/staging/iio/dds/ad9834.h
+++ b/drivers/staging/iio/frequency/ad9834.h
diff --git a/drivers/staging/iio/dds/ad9850.c b/drivers/staging/iio/frequency/ad9850.c
index f4f731bb2191..39f12a6a08b4 100644
--- a/drivers/staging/iio/dds/ad9850.c
+++ b/drivers/staging/iio/frequency/ad9850.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9850"
 
@@ -83,7 +83,7 @@ static int __devinit ad9850_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -108,7 +108,7 @@ static int __devinit ad9850_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -116,7 +116,7 @@ error_ret:
 static int __devexit ad9850_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9852.c b/drivers/staging/iio/frequency/ad9852.c
index 554266c615a8..58d4bf89e64e 100644
--- a/drivers/staging/iio/dds/ad9852.c
+++ b/drivers/staging/iio/frequency/ad9852.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9852"
 
@@ -232,7 +232,7 @@ static int __devinit ad9852_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -258,7 +258,7 @@ static int __devinit ad9852_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 
 error_ret:
 	return ret;
@@ -267,7 +267,7 @@ error_ret:
 static int __devexit ad9852_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9910.c b/drivers/staging/iio/frequency/ad9910.c
index 3985766d6f87..6e7a97e92a20 100644
--- a/drivers/staging/iio/dds/ad9910.c
+++ b/drivers/staging/iio/frequency/ad9910.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9910"
 
@@ -367,7 +367,7 @@ static int __devinit ad9910_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -392,7 +392,7 @@ static int __devinit ad9910_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -400,7 +400,7 @@ error_ret:
 static int __devexit ad9910_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9951.c b/drivers/staging/iio/frequency/ad9951.c
index 4d150048002a..19ba721788fe 100644
--- a/drivers/staging/iio/dds/ad9951.c
+++ b/drivers/staging/iio/frequency/ad9951.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9951"
 
@@ -176,7 +176,7 @@ static int __devinit ad9951_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -202,7 +202,7 @@ static int __devinit ad9951_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 
 error_ret:
 	return ret;
@@ -211,7 +211,7 @@ error_ret:
 static int __devexit ad9951_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/dds.h b/drivers/staging/iio/frequency/dds.h
new file mode 100644
index 000000000000..c3342f6e052b
--- /dev/null
+++ b/drivers/staging/iio/frequency/dds.h
@@ -0,0 +1,110 @@
+/*
+ * dds.h - sysfs attributes associated with DDS devices
+ *
+ * Copyright (c) 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY
+ */
+
+#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequency##_num,	\
+			_mode, _show, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale
+ */
+
+#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string)			\
+	IIO_CONST_ATTR(out_altvoltage##_channel##_frequency_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol
+ */
+
+#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequencysymbol,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phaseY
+ */
+
+#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_phase##_num,		\
+			_mode, _show, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale
+ */
+
+#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string)			\
+	IIO_CONST_ATTR(out_altvoltage##_channel##_phase_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol
+ */
+
+#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_phasesymbol,		\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_en,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_frequency_en,\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_phase_en,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_out_enable
+ */
+
+#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out_enable,		\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_enable
+ */
+
+#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output,			\
+			_mode, _show, _store, _addr)			\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_enable,\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype
+ */
+
+#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_wavetype,\
+			S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available
+ */
+
+#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\
+	IIO_CONST_ATTR(							\
+	out_altvoltage##_channel##_out##_output##_wavetype_available, _modes);
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 02cc23420b90..9931e2060e1f 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -15,8 +15,8 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16060_GYRO		0x20 /* Measure Angular Rate (Gyro) */
 #define ADIS16060_TEMP_OUT	0x10 /* Measure Temperature */
@@ -85,7 +85,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* Take the iio_dev status lock */
 		mutex_lock(&indio_dev->mlock);
 		ret = adis16060_spi_write(indio_dev, chan->address);
@@ -120,22 +120,26 @@ static const struct iio_chan_spec adis16060_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_GYRO,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_AIN1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_AIN2,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = ADIS16060_TEMP_OUT,
 	}
@@ -148,7 +152,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -174,7 +178,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -183,7 +187,7 @@ error_ret:
 static int adis16060_r_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c
index 1815490db8b4..11f1dccd7a0d 100644
--- a/drivers/staging/iio/gyro/adis16080_core.c
+++ b/drivers/staging/iio/gyro/adis16080_core.c
@@ -14,8 +14,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16080_DIN_GYRO   (0 << 10) /* Gyroscope output */
 #define ADIS16080_DIN_TEMP   (1 << 10) /* Temperature output */
@@ -87,7 +87,7 @@ static int adis16080_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = adis16080_spi_write(indio_dev,
 					  chan->address |
 					  ADIS16080_DIN_WRITE);
@@ -110,21 +110,25 @@ static const struct iio_chan_spec adis16080_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_GYRO,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_AIN1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_AIN2,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_TEMP,
 	}
 };
@@ -141,7 +145,7 @@ static int __devinit adis16080_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -167,7 +171,7 @@ static int __devinit adis16080_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -176,7 +180,7 @@ error_ret:
 static int adis16080_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16130_core.c b/drivers/staging/iio/gyro/adis16130_core.c
index 947eb86f05d8..bf61cd0b5bbc 100644
--- a/drivers/staging/iio/gyro/adis16130_core.c
+++ b/drivers/staging/iio/gyro/adis16130_core.c
@@ -16,8 +16,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16130_CON         0x0
 #define ADIS16130_CON_RD      (1 << 6)
@@ -100,11 +100,13 @@ static const struct iio_chan_spec adis16130_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16130_RATEDATA,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16130_TEMPDATA,
 	}
 };
@@ -121,7 +123,7 @@ static int __devinit adis16130_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -145,7 +147,7 @@ static int __devinit adis16130_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -155,7 +157,7 @@ error_ret:
 static int adis16130_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index 8f6af47e9559..d7979cf15cd0 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16260.h"
 
@@ -389,30 +389,76 @@ enum adis16260_channel {
 };
 #define ADIS16260_GYRO_CHANNEL_SET(axis, mod)				\
 	struct iio_chan_spec adis16260_channels_##axis[] = {		\
-		IIO_CHAN(IIO_ANGL_VEL, 1, 0, 0, NULL, 0, mod,		\
-			 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |	\
-			 IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 gyro, ADIS16260_SCAN_GYRO,			\
-			 IIO_ST('s', 14, 16, 0), 0),			\
-		IIO_CHAN(IIO_ANGL, 1, 0, 0, NULL, 0, mod,		\
-			 0,						\
-			 angle, ADIS16260_SCAN_ANGL,			\
-			 IIO_ST('u', 14, 16, 0), 0),			\
-		IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,			\
-			 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 temp, ADIS16260_SCAN_TEMP,			\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 in_supply, ADIS16260_SCAN_SUPPLY,		\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 in_aux, ADIS16260_SCAN_AUX_ADC,		\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN_SOFT_TIMESTAMP(5)				\
+		{							\
+			.type = IIO_ANGL_VEL,				\
+			.modified = 1,					\
+			.channel2 = mod,				\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = gyro,				\
+			.scan_index = ADIS16260_SCAN_GYRO,		\
+			.scan_type = {					\
+				.sign = 's',				\
+				.realbits = 14,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_ANGL,				\
+			.modified = 1,					\
+			.channel2 = mod,				\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+			.address = angle,				\
+			.scan_index = ADIS16260_SCAN_ANGL,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 14,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_TEMP,				\
+			.indexed = 1,					\
+			.channel = 0,					\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = temp,				\
+			.scan_index = ADIS16260_SCAN_TEMP,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_VOLTAGE,				\
+			.indexed = 1,					\
+			.channel = 0,					\
+			.extend_name = "supply",			\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = in_supply,				\
+			.scan_index = ADIS16260_SCAN_SUPPLY,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_VOLTAGE,				\
+			.indexed = 1,					\
+			.channel = 1,					\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = in_aux,				\
+			.scan_index = ADIS16260_SCAN_AUX_ADC,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		},							\
+		IIO_CHAN_SOFT_TIMESTAMP(5),				\
 	}
 
 static const ADIS16260_GYRO_CHANNEL_SET(x, IIO_MOD_X);
@@ -440,7 +486,7 @@ static int adis16260_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16260_addresses[chan->address][0];
 		ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
@@ -581,7 +627,7 @@ static int __devinit adis16260_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -666,7 +712,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16260_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -687,7 +733,7 @@ static int adis16260_remove(struct spi_device *spi)
 	adis16260_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16260_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c
index 711f15122a08..25283376f2fc 100644
--- a/drivers/staging/iio/gyro/adis16260_ring.c
+++ b/drivers/staging/iio/gyro/adis16260_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16260.h"
 
 /**
@@ -66,9 +66,8 @@ static irqreturn_t adis16260_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -81,7 +80,7 @@ static irqreturn_t adis16260_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c
index 8299cd18d705..034559e4d5b9 100644
--- a/drivers/staging/iio/gyro/adis16260_trigger.c
+++ b/drivers/staging/iio/gyro/adis16260_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16260.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16260_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->us)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -60,7 +60,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -71,5 +71,5 @@ void adis16260_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/staging/iio/gyro/adxrs450_core.c
index 15e2496f70c8..6513119b1e90 100644
--- a/drivers/staging/iio/gyro/adxrs450_core.c
+++ b/drivers/staging/iio/gyro/adxrs450_core.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "adxrs450.h"
 
@@ -265,7 +265,7 @@ static int adxrs450_read_raw(struct iio_dev *indio_dev,
 	s16 t;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		switch (chan->type) {
 		case IIO_ANGL_VEL:
 			ret = adxrs450_spi_sensor_data(indio_dev, &t);
@@ -329,14 +329,16 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = {
 			.type = IIO_ANGL_VEL,
 			.modified = 1,
 			.channel2 = IIO_MOD_Z,
-			.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 			IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT |
 			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}, {
 			.type = IIO_TEMP,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}
 	},
 	[ID_ADXRS453] = {
@@ -344,13 +346,15 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = {
 			.type = IIO_ANGL_VEL,
 			.modified = 1,
 			.channel2 = IIO_MOD_Z,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 			IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT,
 		}, {
 			.type = IIO_TEMP,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}
 	},
 };
@@ -368,7 +372,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -399,7 +403,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi)
 error_initial:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -408,7 +412,7 @@ error_ret:
 static int adxrs450_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index f39f346bf04f..0cd4fe916bf9 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -22,8 +22,8 @@
 #include <linux/sysfs.h>
 
 #include "iio_dummy_evgen.h"
-#include "iio.h"
-#include "sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /* Fiddly bit of faking and irq without hardware */
 #define IIO_EVENTGEN_NO 10
diff --git a/drivers/staging/iio/iio_hwmon.c b/drivers/staging/iio/iio_hwmon.c
index a603a5f51f93..b03554fee443 100644
--- a/drivers/staging/iio/iio_hwmon.c
+++ b/drivers/staging/iio/iio_hwmon.c
@@ -14,8 +14,8 @@
 #include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
-#include "consumer.h"
-#include "types.h"
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
 
 /**
  * struct iio_hwmon_state - device instance state
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index e3a94572bb40..3b4513cf5ab9 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -19,10 +19,10 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 
-#include "iio.h"
-#include "sysfs.h"
-#include "events.h"
-#include "buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 #include "iio_simple_dummy.h"
 
 /*
@@ -73,6 +73,12 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		/* What other information is available? */
 		.info_mask =
 		/*
+		 * in_voltage0_raw
+		 * Raw (unscaled no bias removal etc) measurement
+		 * from the device.
+		 */
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		/*
 		 * in_voltage0_offset
 		 * Offset for userspace to apply prior to scale
 		 * when converting to standard units (microvolts)
@@ -114,6 +120,12 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		.channel2 = 2,
 		.info_mask =
 		/*
+		 * in_voltage1-voltage2_raw
+		 * Raw (unscaled no bias removal etc) measurement
+		 * from the device.
+		 */
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		/*
 		 * in_voltage-voltage_scale
 		 * Shared version of scale - shared by differential
 		 * input channels of type IIO_VOLTAGE.
@@ -135,6 +147,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		.channel = 3,
 		.channel2 = 4,
 		.info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.scan_index = diffvoltage3m4,
 		.scan_type = {
@@ -154,6 +167,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		/* Channel 2 is use for modifiers */
 		.channel2 = IIO_MOD_X,
 		.info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		/*
 		 * Internal bias correction value. Applied
 		 * by the hardware or driver prior to userspace
@@ -177,6 +191,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 	/* DAC channel out_voltage0_raw */
 	{
 		.type = IIO_VOLTAGE,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.output = 1,
 		.indexed = 1,
 		.channel = 0,
@@ -203,7 +218,7 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&st->lock);
 	switch (mask) {
-	case 0: /* magic value - channel value read */
+	case IIO_CHAN_INFO_RAW: /* magic value - channel value read */
 		switch (chan->type) {
 		case IIO_VOLTAGE:
 			if (chan->output) {
@@ -290,7 +305,7 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev,
 	struct iio_dummy_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (chan->output == 0)
 			return -EINVAL;
 
@@ -377,7 +392,7 @@ static int __devinit iio_dummy_probe(int index)
 	 * It also has a region (accessed by iio_priv()
 	 * for chip specific state information.
 	 */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -457,7 +472,7 @@ error_unregister_events:
 error_free_device:
 	/* Note free device should only be called, before registration
 	 * has succeeded. */
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -494,7 +509,7 @@ static int iio_dummy_remove(int index)
 		goto error_ret;
 
 	/* Free all structures */
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index bb4daf744362..372606572d15 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -18,9 +18,9 @@
 #include <linux/irq.h>
 #include <linux/bitmap.h>
 
-#include "iio.h"
-#include "trigger_consumer.h"
-#include "kfifo_buf.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/kfifo_buf.h>
 
 #include "iio_simple_dummy.h"
 
@@ -48,12 +48,9 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int len = 0;
-	/*
-	 * The datasize is obtained from the buffer. It was stored when
-	 * the preenable setup function was called.
-	 */
-	size_t datasize = buffer->access->get_bytes_per_datum(buffer);
-	u16 *data = kmalloc(datasize, GFP_KERNEL);
+	u16 *data;
+
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
@@ -87,7 +84,7 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
 		}
 	}
 	/* Store a timestampe at an 8 byte boundary */
-	if (buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*(s64 *)(((phys_addr_t)data + len
 				+ sizeof(s64) - 1) & ~(sizeof(s64) - 1))
 			= iio_get_time_ns();
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index 449c7a5ece80..f85bd197ed31 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -12,9 +12,9 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include "iio.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "iio_simple_dummy.h"
 
 /* Evgen 'fakes' interrupt events for this example */
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index cd82b56d58af..359a794f684a 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -19,9 +19,9 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "../ring_sw.h"
 
 #include "ad5933.h"
@@ -109,15 +109,46 @@ static struct ad5933_platform_data ad5933_default_pdata  = {
 };
 
 static struct iio_chan_spec ad5933_channels[] = {
-	IIO_CHAN(IIO_TEMP, 0, 1, 1, NULL, 0, 0, 0,
-		 0, AD5933_REG_TEMP_DATA, IIO_ST('s', 14, 16, 0), 0),
-	/* Ring Channels */
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "real_raw", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 AD5933_REG_REAL_DATA, 0, IIO_ST('s', 16, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "imag_raw", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 AD5933_REG_IMAG_DATA, 1, IIO_ST('s', 16, 16, 0), 0),
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+		.address = AD5933_REG_TEMP_DATA,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, { /* Ring Channels */
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "real_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = AD5933_REG_REAL_DATA,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "imag_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = AD5933_REG_IMAG_DATA,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	},
 };
 
 static int ad5933_i2c_write(struct i2c_client *client,
@@ -495,7 +526,8 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&indio_dev->mlock);
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		if (iio_buffer_enabled(indio_dev)) {
 			ret = -EBUSY;
 			goto out;
@@ -537,19 +569,14 @@ static const struct iio_info ad5933_info = {
 static int ad5933_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad5933_state *st = iio_priv(indio_dev);
-	size_t d_size;
 	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		 ad5933_channels[1].scan_type.storagebits / 8;
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	ret = ad5933_reset(st);
 	if (ret < 0)
@@ -678,7 +705,7 @@ static int __devinit ad5933_probe(struct i2c_client *client,
 	int ret, voltage_uv = 0;
 	struct ad5933_platform_data *pdata = client->dev.platform_data;
 	struct ad5933_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -757,7 +784,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -774,7 +801,7 @@ static __devexit int ad5933_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index e73ad7818d85..5015f823b65f 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -26,9 +26,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "adis16400.h"
 
 enum adis16400_chip_variant {
@@ -545,7 +545,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = adis16400_spi_read_reg_16(indio_dev,
 				adis16400_addresses[chan->address][0],
@@ -635,7 +635,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 14, 16, 0)
@@ -643,7 +644,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -653,7 +655,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -663,7 +666,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
@@ -673,7 +677,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -683,7 +688,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -693,7 +699,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -703,7 +710,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_x,
 		.scan_index = ADIS16400_SCAN_MAGN_X,
@@ -712,7 +720,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_y,
 		.scan_index = ADIS16400_SCAN_MAGN_Y,
@@ -721,7 +730,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_z,
 		.scan_index = ADIS16400_SCAN_MAGN_Z,
@@ -730,7 +740,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 		.scan_index = ADIS16400_SCAN_TEMP,
@@ -739,7 +750,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16400_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -753,7 +765,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 12, 16, 0)
@@ -761,7 +774,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -771,7 +785,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -781,17 +796,19 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
 		.scan_index = ADIS16400_SCAN_GYRO_Z,
 		.scan_type = IIO_ST('s', 14, 16, 0),
 	}, {
-	.type = IIO_ACCEL,
+		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -801,7 +818,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -811,7 +829,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -822,7 +841,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "x",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = temp0,
@@ -833,7 +853,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.extend_name = "y",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = temp1,
@@ -844,7 +865,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 2,
 		.extend_name = "z",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp2,
 		.scan_index = ADIS16350_SCAN_TEMP_Z,
@@ -853,7 +875,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16350_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -867,7 +890,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 12, 16, 0)
@@ -875,7 +899,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -885,7 +910,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -895,7 +921,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -905,7 +932,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -915,7 +943,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 		.scan_index = ADIS16400_SCAN_TEMP,
@@ -924,7 +953,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16350_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -932,7 +962,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_INCLI,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = incli_x,
 		.scan_index = ADIS16300_SCAN_INCLI_X,
 		.scan_type = IIO_ST('s', 13, 16, 0),
@@ -940,7 +971,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_INCLI,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = incli_y,
 		.scan_index = ADIS16300_SCAN_INCLI_Y,
 		.scan_type = IIO_ST('s', 13, 16, 0),
@@ -953,7 +985,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -963,7 +996,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -973,7 +1007,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
@@ -983,7 +1018,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -993,7 +1029,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -1003,7 +1040,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -1013,7 +1051,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = accel_z,
 		.scan_index = ADIS16400_SCAN_ACC_Z,
@@ -1122,7 +1161,7 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 {
 	int ret;
 	struct adis16400_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret =  -ENOMEM;
 		goto error_ret;
@@ -1172,14 +1211,14 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq)
 		adis16400_remove_trigger(indio_dev);
 error_uninitialize_ring:
 	iio_buffer_unregister(indio_dev);
 error_unreg_ring_funcs:
 	adis16400_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -1198,7 +1237,7 @@ static int adis16400_remove(struct spi_device *spi)
 	adis16400_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16400_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 8daa038b23e6..e43c0e2f43a6 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -6,9 +6,9 @@
 #include <linux/bitops.h>
 #include <linux/export.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16400.h"
 
 /**
@@ -119,12 +119,12 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0, j, ret = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
+
 	/* Asumption that long is enough for maximum channels */
 	unsigned long mask = *indio_dev->active_scan_mask;
 	int scan_count = bitmap_weight(indio_dev->active_scan_mask,
 				       indio_dev->masklength);
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c
index 5bf000757522..42a678e92fc6 100644
--- a/drivers/staging/iio/imu/adis16400_trigger.c
+++ b/drivers/staging/iio/imu/adis16400_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16400.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16400_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					indio_dev->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -59,7 +59,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -70,5 +70,5 @@ void adis16400_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index e7e9159d9895..4bed30eac3ed 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -4,15 +4,26 @@
 menu "Light sensors"
 
 config SENSORS_ISL29018
-        tristate "ISL 29018 light and proximity sensor"
-        depends on I2C
-        default n
-        help
-         If you say yes here you get support for ambient light sensing and
-         proximity infrared sensing from Intersil ISL29018.
-         This driver will provide the measurements of ambient light intensity
-         in lux, proximity infrared sensing and normal infrared sensing.
-         Data from sensor is accessible via sysfs.
+	tristate "ISL 29018 light and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	default n
+	help
+	 If you say yes here you get support for ambient light sensing and
+	 proximity infrared sensing from Intersil ISL29018.
+	 This driver will provide the measurements of ambient light intensity
+	 in lux, proximity infrared sensing and normal infrared sensing.
+	 Data from sensor is accessible via sysfs.
+
+config SENSORS_ISL29028
+	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Provides driver for the Intersil's ISL29028 device.
+	 This driver supports the sysfs interface to get the ALS, IR intensity,
+	 Proximity value via iio. The ISL29028 provides the concurrent sensing
+	 of ambient light and proximity.
 
 config SENSORS_TSL2563
 	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
@@ -31,4 +42,12 @@ config TSL2583
 	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
 	 Access ALS data via iio, sysfs.
 
+config TSL2x7x
+	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
+	depends on I2C
+	help
+	 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
+	 tmd2672, tsl2772, tmd2772 devices.
+	 Provides iio_events and direct access via sysfs.
+
 endmenu
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 3011fbfa8dc2..141af1eb164c 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
+obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o
+obj-$(CONFIG_TSL2x7x)	+= tsl2x7x_core.o
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 38ec52b65dfa..2d23c6afa286 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -26,9 +26,11 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
 #define CONVERSION_TIME_MS		100
 
 #define ISL29018_REG_ADD_COMMAND1	0x00
@@ -51,49 +53,22 @@
 
 #define ISL29018_REG_ADD_DATA_LSB	0x02
 #define ISL29018_REG_ADD_DATA_MSB	0x03
-#define ISL29018_MAX_REGS		(ISL29018_REG_ADD_DATA_MSB+1)
 
 #define ISL29018_REG_TEST		0x08
 #define ISL29018_TEST_SHIFT		0
 #define ISL29018_TEST_MASK		(0xFF << ISL29018_TEST_SHIFT)
 
 struct isl29018_chip {
-	struct i2c_client	*client;
+	struct device		*dev;
+	struct regmap		*regmap;
 	struct mutex		lock;
 	unsigned int		lux_scale;
 	unsigned int		range;
 	unsigned int		adc_bit;
 	int			prox_scheme;
-	u8			reg_cache[ISL29018_MAX_REGS];
 };
 
-static int isl29018_write_data(struct i2c_client *client, u8 reg,
-			u8 val, u8 mask, u8 shift)
-{
-	u8 regval = val;
-	int ret;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
-
-	/* don't cache or mask REG_TEST */
-	if (reg < ISL29018_MAX_REGS) {
-		regval = chip->reg_cache[reg];
-		regval &= ~mask;
-		regval |= val << shift;
-	}
-
-	ret = i2c_smbus_write_byte_data(client, reg, regval);
-	if (ret) {
-		dev_err(&client->dev, "Write to device fails status %x\n", ret);
-	} else {
-		/* don't update cache on err */
-		if (reg < ISL29018_MAX_REGS)
-			chip->reg_cache[reg] = regval;
-	}
-
-	return ret;
-}
-
-static int isl29018_set_range(struct i2c_client *client, unsigned long range,
+static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
 		unsigned int *new_range)
 {
 	static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
@@ -109,11 +84,11 @@ static int isl29018_set_range(struct i2c_client *client, unsigned long range,
 	if (i >= ARRAY_SIZE(supp_ranges))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT);
 }
 
-static int isl29018_set_resolution(struct i2c_client *client,
+static int isl29018_set_resolution(struct isl29018_chip *chip,
 			unsigned long adcbit, unsigned int *conf_adc_bit)
 {
 	static const unsigned long supp_adcbit[] = {16, 12, 8, 4};
@@ -129,48 +104,49 @@ static int isl29018_set_resolution(struct i2c_client *client,
 	if (i >= ARRAY_SIZE(supp_adcbit))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RESOLUTION_MASK,
-			COMMANDII_RESOLUTION_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RESOLUTION_MASK,
+			i << COMMANDII_RESOLUTION_SHIFT);
 }
 
-static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
+static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
 {
 	int status;
-	int lsb;
-	int msb;
+	unsigned int lsb;
+	unsigned int msb;
 
 	/* Set mode */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1,
-			mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT);
+	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1,
+			mode << COMMMAND1_OPMODE_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev,
+			"Error in setting operating mode err %d\n", status);
 		return status;
 	}
 	msleep(CONVERSION_TIME_MS);
-	lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB);
-	if (lsb < 0) {
-		dev_err(&client->dev, "Error in reading LSB DATA\n");
-		return lsb;
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading LSB DATA with err %d\n", status);
+		return status;
 	}
 
-	msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB);
-	if (msb < 0) {
-		dev_err(&client->dev, "Error in reading MSB DATA\n");
-		return msb;
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading MSB DATA with error %d\n", status);
+		return status;
 	}
-	dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
+	dev_vdbg(chip->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
 
 	return (msb << 8) | lsb;
 }
 
-static int isl29018_read_lux(struct i2c_client *client, int *lux)
+static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
 {
 	int lux_data;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 
-	lux_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_ALS_ONCE);
+	lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
 
 	if (lux_data < 0)
 		return lux_data;
@@ -180,11 +156,11 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux)
 	return 0;
 }
 
-static int isl29018_read_ir(struct i2c_client *client, int *ir)
+static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
 {
 	int ir_data;
 
-	ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -194,7 +170,7 @@ static int isl29018_read_ir(struct i2c_client *client, int *ir)
 	return 0;
 }
 
-static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
+static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 		int *near_ir)
 {
 	int status;
@@ -202,14 +178,15 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 	int ir_data = -1;
 
 	/* Do proximity sensing with required scheme */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT);
+	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_SCHEME_MASK,
+			scheme << COMMANDII_SCHEME_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev, "Error in setting operating mode\n");
 		return status;
 	}
 
-	prox_data = isl29018_read_sensor_input(client,
+	prox_data = isl29018_read_sensor_input(chip,
 					COMMMAND1_OPMODE_PROX_ONCE);
 	if (prox_data < 0)
 		return prox_data;
@@ -219,8 +196,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 		return 0;
 	}
 
-	ir_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -249,7 +225,6 @@ static ssize_t store_range(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_range;
@@ -264,10 +239,11 @@ static ssize_t store_range(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_range(client, lval, &new_range);
+	status = isl29018_set_range(chip, lval, &new_range);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
-		dev_err(dev, "Error in setting max range\n");
+		dev_err(dev,
+			"Error in setting max range with err %d\n", status);
 		return status;
 	}
 	chip->range = new_range;
@@ -291,7 +267,6 @@ static ssize_t store_resolution(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_adc_bit;
@@ -304,7 +279,7 @@ static ssize_t store_resolution(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_resolution(client, lval, &new_adc_bit);
+	status = isl29018_set_resolution(chip, lval, &new_adc_bit);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
 		dev_err(dev, "Error in setting resolution\n");
@@ -379,20 +354,20 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
 {
 	int ret = -EINVAL;
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 
 	mutex_lock(&chip->lock);
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_LIGHT:
-			ret = isl29018_read_lux(client, val);
+			ret = isl29018_read_lux(chip, val);
 			break;
 		case IIO_INTENSITY:
-			ret = isl29018_read_ir(client, val);
+			ret = isl29018_read_ir(chip, val);
 			break;
 		case IIO_PROXIMITY:
-			ret = isl29018_read_proximity_ir(client,
+			ret = isl29018_read_proximity_ir(chip,
 					chip->prox_scheme, val);
 			break;
 		default:
@@ -419,15 +394,17 @@ static const struct iio_chan_spec isl29018_channels[] = {
 		.type = IIO_LIGHT,
 		.indexed = 1,
 		.channel = 0,
-		.processed_val = IIO_PROCESSED,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 	}, {
 		.type = IIO_INTENSITY,
 		.modified = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.channel2 = IIO_MOD_LIGHT_IR,
 	}, {
 		/* Unindexed in current ABI.  But perhaps it should be. */
 		.type = IIO_PROXIMITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -456,15 +433,12 @@ static const struct attribute_group isl29108_group = {
 	.attrs = isl29018_attributes,
 };
 
-static int isl29018_chip_init(struct i2c_client *client)
+static int isl29018_chip_init(struct isl29018_chip *chip)
 {
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 	int status;
 	int new_adc_bit;
 	unsigned int new_range;
 
-	memset(chip->reg_cache, 0, sizeof(chip->reg_cache));
-
 	/* Code added per Intersil Application Note 1534:
 	 *     When VDD sinks to approximately 1.8V or below, some of
 	 * the part's registers may change their state. When VDD
@@ -485,10 +459,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * the same thing EXCEPT the data sheet asks for a 1ms delay after
 	 * writing the CMD1 register.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_TEST, 0,
-				ISL29018_TEST_MASK, ISL29018_TEST_SHIFT);
+	status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 TEST reg."
+		dev_err(chip->dev, "Failed to clear isl29018 TEST reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -497,10 +470,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * "Operating Mode" (COMMAND1) register is reprogrammed when
 	 * data is read from the device.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, 0,
-				0xff, 0);
+	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 CMD1 reg."
+		dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -508,13 +480,13 @@ static int isl29018_chip_init(struct i2c_client *client)
 	msleep(1);	/* per data sheet, page 10 */
 
 	/* set defaults */
-	status = isl29018_set_range(client, chip->range, &new_range);
+	status = isl29018_set_range(chip, chip->range, &new_range);
 	if (status < 0) {
-		dev_err(&client->dev, "Init of isl29018 fails\n");
+		dev_err(chip->dev, "Init of isl29018 fails\n");
 		return status;
 	}
 
-	status = isl29018_set_resolution(client, chip->adc_bit,
+	status = isl29018_set_resolution(chip, chip->adc_bit,
 						&new_adc_bit);
 
 	return 0;
@@ -527,6 +499,32 @@ static const struct iio_info isl29108_info = {
 	.write_raw = &isl29018_write_raw,
 };
 
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29018_REG_ADD_DATA_LSB:
+	case ISL29018_REG_ADD_DATA_MSB:
+	case ISL29018_REG_ADD_COMMAND1:
+	case ISL29018_REG_TEST:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
+ * isl29018_regmap_config: regmap configuration.
+ * Use RBTREE mechanism for caching.
+ */
+static const struct regmap_config isl29018_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = ISL29018_REG_TEST,
+	.num_reg_defaults_raw = ISL29018_REG_TEST + 1,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static int __devinit isl29018_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -534,7 +532,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int err;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		dev_err(&client->dev, "iio allocation fails\n");
 		err = -ENOMEM;
@@ -543,7 +541,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip = iio_priv(indio_dev);
 
 	i2c_set_clientdata(client, indio_dev);
-	chip->client = client;
+	chip->dev = &client->dev;
 
 	mutex_init(&chip->lock);
 
@@ -551,7 +549,14 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip->range = 1000;
 	chip->adc_bit = 16;
 
-	err = isl29018_chip_init(client);
+	chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		err = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "regmap initialization failed: %d\n", err);
+		goto exit;
+	}
+
+	err = isl29018_chip_init(chip);
 	if (err)
 		goto exit_iio_free;
 
@@ -569,7 +574,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 
 	return 0;
 exit_iio_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
@@ -580,7 +585,7 @@ static int __devexit isl29018_remove(struct i2c_client *client)
 
 	dev_dbg(&client->dev, "%s()\n", __func__);
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
@@ -593,7 +598,7 @@ static const struct i2c_device_id isl29018_id[] = {
 MODULE_DEVICE_TABLE(i2c, isl29018_id);
 
 static const struct of_device_id isl29018_of_match[] = {
-	{ .compatible = "invn,isl29018", },
+	{ .compatible = "isil,isl29018", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, isl29018_of_match);
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
new file mode 100644
index 000000000000..33a4c3f94a14
--- /dev/null
+++ b/drivers/staging/iio/light/isl29028.c
@@ -0,0 +1,566 @@
+/*
+ * IIO driver for the light sensor ISL29028.
+ * ISL29028 is Concurrent Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define CONVERSION_TIME_MS		100
+
+#define ISL29028_REG_CONFIGURE		0x01
+
+#define CONFIGURE_ALS_IR_MODE_ALS	0
+#define CONFIGURE_ALS_IR_MODE_IR	BIT(0)
+#define CONFIGURE_ALS_IR_MODE_MASK	BIT(0)
+
+#define CONFIGURE_ALS_RANGE_LOW_LUX	0
+#define CONFIGURE_ALS_RANGE_HIGH_LUX	BIT(1)
+#define CONFIGURE_ALS_RANGE_MASK	BIT(1)
+
+#define CONFIGURE_ALS_DIS		0
+#define CONFIGURE_ALS_EN		BIT(2)
+#define CONFIGURE_ALS_EN_MASK		BIT(2)
+
+#define CONFIGURE_PROX_DRIVE		BIT(3)
+
+#define CONFIGURE_PROX_SLP_SH		4
+#define CONFIGURE_PROX_SLP_MASK		(7 << CONFIGURE_PROX_SLP_SH)
+
+#define CONFIGURE_PROX_EN		BIT(7)
+#define CONFIGURE_PROX_EN_MASK		BIT(7)
+
+#define ISL29028_REG_INTERRUPT		0x02
+
+#define ISL29028_REG_PROX_DATA		0x08
+#define ISL29028_REG_ALSIR_L		0x09
+#define ISL29028_REG_ALSIR_U		0x0A
+
+#define ISL29028_REG_TEST1_MODE		0x0E
+#define ISL29028_REG_TEST2_MODE		0x0F
+
+#define ISL29028_NUM_REGS		(ISL29028_REG_TEST2_MODE + 1)
+
+enum als_ir_mode {
+	MODE_NONE = 0,
+	MODE_ALS,
+	MODE_IR
+};
+
+struct isl29028_chip {
+	struct device		*dev;
+	struct mutex		lock;
+	struct regmap		*regmap;
+
+	unsigned int		prox_sampling;
+	bool			enable_prox;
+
+	int			lux_scale;
+	int			als_ir_mode;
+};
+
+static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
+			unsigned int sampling)
+{
+	static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
+	int sel;
+	unsigned int period = DIV_ROUND_UP(1000, sampling);
+
+	for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) {
+		if (period >= prox_period[sel])
+			break;
+	}
+	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH);
+}
+
+static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
+{
+	int ret;
+	int val = 0;
+
+	if (enable)
+		val = CONFIGURE_PROX_EN;
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_PROX_EN_MASK, val);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for conversion to be complete for first sample */
+	mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
+	return 0;
+}
+
+static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
+{
+	int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
+					CONFIGURE_ALS_RANGE_LOW_LUX;
+
+	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+		CONFIGURE_ALS_RANGE_MASK, val);
+}
+
+static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
+	enum als_ir_mode mode)
+{
+	int ret = 0;
+
+	switch (mode) {
+	case MODE_ALS:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
+		break;
+
+	case MODE_IR:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
+		break;
+
+	case MODE_NONE:
+		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	/* Enable the ALS/IR */
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* Need to wait for conversion time if ALS/IR mode enabled */
+	mdelay(CONVERSION_TIME_MS);
+	return 0;
+}
+
+static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
+{
+	unsigned int lsb;
+	unsigned int msb;
+	int ret;
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
+	if (ret < 0) {
+		dev_err(chip->dev,
+			"Error in reading register ALSIR_L err %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
+	if (ret < 0) {
+		dev_err(chip->dev,
+			"Error in reading register ALSIR_U err %d\n", ret);
+		return ret;
+	}
+
+	*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
+	return 0;
+}
+
+static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
+{
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error in reading register %d, error %d\n",
+				ISL29028_REG_PROX_DATA, ret);
+		return ret;
+	}
+	*prox = data;
+	return 0;
+}
+
+static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
+{
+	int ret;
+
+	if (!chip->enable_prox) {
+		ret = isl29028_enable_proximity(chip, true);
+		if (ret < 0)
+			return ret;
+		chip->enable_prox = true;
+	}
+	return isl29028_read_proxim(chip, prox_data);
+}
+
+static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
+{
+	int ret;
+	int als_ir_data;
+
+	if (chip->als_ir_mode != MODE_ALS) {
+		ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Error in enabling ALS mode err %d\n", ret);
+			return ret;
+		}
+		chip->als_ir_mode = MODE_ALS;
+	}
+
+	ret = isl29028_read_als_ir(chip, &als_ir_data);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * convert als data count to lux.
+	 * if lux_scale = 125,  lux = count * 0.031
+	 * if lux_scale = 2000, lux = count * 0.49
+	 */
+	if (chip->lux_scale == 125)
+		als_ir_data = (als_ir_data * 31) / 1000;
+	else
+		als_ir_data = (als_ir_data * 49) / 100;
+
+	*als_data = als_ir_data;
+	return 0;
+}
+
+static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
+{
+	int ret;
+
+	if (chip->als_ir_mode != MODE_IR) {
+		ret = isl29028_set_als_ir_mode(chip, MODE_IR);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Error in enabling IR mode err %d\n", ret);
+			return ret;
+		}
+		chip->als_ir_mode = MODE_IR;
+	}
+	return isl29028_read_als_ir(chip, ir_data);
+}
+
+/* Channel IO */
+static int isl29028_write_raw(struct iio_dev *indio_dev,
+	     struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->lock);
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
+			dev_err(chip->dev,
+				"proximity: mask value 0x%08lx not supported\n",
+				mask);
+			break;
+		}
+		if (val < 1 || val > 100) {
+			dev_err(chip->dev,
+				"Samp_freq %d is not in range[1:100]\n", val);
+			break;
+		}
+		ret = isl29028_set_proxim_sampling(chip, val);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Setting proximity samp_freq fail, err %d\n",
+				ret);
+			break;
+		}
+		chip->prox_sampling = val;
+		break;
+
+	case IIO_LIGHT:
+		if (mask != IIO_CHAN_INFO_SCALE) {
+			dev_err(chip->dev,
+				"light: mask value 0x%08lx not supported\n",
+				mask);
+			break;
+		}
+		if ((val != 125) && (val != 2000)) {
+			dev_err(chip->dev,
+				"lux scale %d is invalid [125, 2000]\n", val);
+			break;
+		}
+		ret = isl29028_set_als_scale(chip, val);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Setting lux scale fail with error %d\n", ret);
+			break;
+		}
+		chip->lux_scale = val;
+		break;
+
+	default:
+		dev_err(chip->dev, "Unsupported channel type\n");
+		break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int isl29028_read_raw(struct iio_dev *indio_dev,
+	     struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = isl29028_als_get(chip, val);
+			break;
+		case IIO_INTENSITY:
+			ret = isl29028_ir_get(chip, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = isl29028_proxim_get(chip, val);
+			break;
+		default:
+			break;
+		}
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_PROXIMITY)
+			break;
+		*val = chip->prox_sampling;
+		ret = IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_LIGHT)
+			break;
+		*val = chip->lux_scale;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
+		break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
+				"1, 3, 5, 10, 13, 20, 83, 100");
+static IIO_CONST_ATTR(in_illuminance_scale_available, "125, 2000");
+
+#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
+#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+static struct attribute *isl29028_attributes[] = {
+	ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available),
+	ISL29028_CONST_ATTR(in_illuminance_scale_available),
+	NULL,
+};
+
+static const struct attribute_group isl29108_group = {
+	.attrs = isl29028_attributes,
+};
+
+static const struct iio_chan_spec isl29028_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+	}, {
+		.type = IIO_INTENSITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+	}, {
+		.type = IIO_PROXIMITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
+	}
+};
+
+static const struct iio_info isl29028_info = {
+	.attrs = &isl29108_group,
+	.driver_module = THIS_MODULE,
+	.read_raw = &isl29028_read_raw,
+	.write_raw = &isl29028_write_raw,
+};
+
+static int isl29028_chip_init(struct isl29028_chip *chip)
+{
+	int ret;
+
+	chip->enable_prox  = false;
+	chip->prox_sampling = 20;
+	chip->lux_scale = 2000;
+	chip->als_ir_mode = MODE_NONE;
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_TEST1_MODE, ret);
+		return ret;
+	}
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_TEST2_MODE, ret);
+		return ret;
+	}
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_CONFIGURE, ret);
+		return ret;
+	}
+
+	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = isl29028_set_als_scale(chip, chip->lux_scale);
+	if (ret < 0)
+		dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
+			__func__, ret);
+	return ret;
+}
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29028_REG_INTERRUPT:
+	case ISL29028_REG_PROX_DATA:
+	case ISL29028_REG_ALSIR_L:
+	case ISL29028_REG_ALSIR_U:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config isl29028_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = ISL29028_NUM_REGS - 1,
+	.num_reg_defaults_raw = ISL29028_NUM_REGS,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit isl29028_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct isl29028_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*chip));
+	if (!indio_dev) {
+		dev_err(&client->dev, "iio allocation fails\n");
+		return -ENOMEM;
+	}
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	chip->dev = &client->dev;
+	mutex_init(&chip->lock);
+
+	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
+		goto exit_iio_free;
+	}
+
+	ret = isl29028_chip_init(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "chip initialization failed: %d\n", ret);
+		goto exit_iio_free;
+	}
+
+	indio_dev->info = &isl29028_info;
+	indio_dev->channels = isl29028_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(chip->dev, "iio registration fails with error %d\n",
+			ret);
+		goto exit_iio_free;
+	}
+	return 0;
+
+exit_iio_free:
+	iio_device_free(indio_dev);
+	return ret;
+}
+
+static int __devexit isl29028_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_device_free(indio_dev);
+	return 0;
+}
+
+static const struct i2c_device_id isl29028_id[] = {
+	{"isl29028", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, isl29028_id);
+
+static const struct of_device_id isl29028_of_match[] = {
+	{ .compatible = "isil,isl29028", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isl29028_of_match);
+
+static struct i2c_driver isl29028_driver = {
+	.class	= I2C_CLASS_HWMON,
+	.driver  = {
+		.name = "isl29028",
+		.owner = THIS_MODULE,
+		.of_match_table = isl29028_of_match,
+	},
+	.probe	 = isl29028_probe,
+	.remove  = __devexit_p(isl29028_remove),
+	.id_table = isl29028_id,
+};
+
+module_i2c_driver(isl29028_driver);
+
+MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 546c95a4ea9e..9d740be43a82 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -35,9 +35,9 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "tsl2563.h"
 
 /* Use this many bits for fraction part. */
@@ -465,7 +465,7 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 
-	if (chan->channel == 0)
+	if (chan->channel == IIO_MOD_LIGHT_BOTH)
 		chip->calib0 = calib_from_sysfs(val);
 	else
 		chip->calib1 = calib_from_sysfs(val);
@@ -485,7 +485,8 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&chip->lock);
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_LIGHT:
 			ret = tsl2563_get_adc(chip);
@@ -534,12 +535,14 @@ static const struct iio_chan_spec tsl2563_channels[] = {
 	{
 		.type = IIO_LIGHT,
 		.indexed = 1,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.channel = 0,
 	}, {
 		.type = IIO_INTENSITY,
 		.modified = 1,
 		.channel2 = IIO_MOD_LIGHT_BOTH,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
 					  IIO_EV_DIR_RISING) |
 			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
@@ -548,7 +551,8 @@ static const struct iio_chan_spec tsl2563_channels[] = {
 		.type = IIO_INTENSITY,
 		.modified = 1,
 		.channel2 = IIO_MOD_LIGHT_IR,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 	}
 };
 
@@ -710,7 +714,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 	int err = 0;
 	u8 id = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -797,7 +801,7 @@ fail2:
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 fail1:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 	return err;
 }
 
@@ -818,7 +822,7 @@ static int tsl2563_remove(struct i2c_client *client)
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 8671d98e0448..5ff391e8c18b 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -28,7 +28,7 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include "../iio.h"
+#include <linux/iio/iio.h>
 
 #define TSL258X_MAX_DEVICE_REGS		32
 
@@ -815,7 +815,7 @@ static int __devinit taos_probe(struct i2c_client *clientp,
 		return -EOPNOTSUPP;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		dev_err(&clientp->dev, "iio allocation failed\n");
@@ -879,7 +879,7 @@ static int __devinit taos_probe(struct i2c_client *clientp,
 	dev_info(&clientp->dev, "Light sensor found.\n");
 	return 0;
 fail1:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 fail2:
 	return ret;
 }
@@ -926,7 +926,7 @@ static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume);
 static int __devexit taos_remove(struct i2c_client *client)
 {
 	iio_device_unregister(i2c_get_clientdata(client));
-	iio_free_device(i2c_get_clientdata(client));
+	iio_device_free(i2c_get_clientdata(client));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
new file mode 100755
index 000000000000..c4acf5ff1794
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x.h
@@ -0,0 +1,100 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * and proximity (prox) within the TAOS TSL2X7X family of devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ */
+
+#ifndef __TSL2X7X_H
+#define __TSL2X7X_H
+#include <linux/pm.h>
+
+/* Max number of segments allowable in LUX table */
+#define TSL2X7X_MAX_LUX_TABLE_SIZE		9
+#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE)
+
+struct iio_dev;
+
+struct tsl2x7x_lux {
+	unsigned int ratio;
+	unsigned int ch0;
+	unsigned int ch1;
+};
+
+/**
+ * struct tsl2x7x_default_settings - power on defaults unless
+ *                                   overridden by platform data.
+ *  @als_time:              ALS Integration time - multiple of 50mS
+ *  @als_gain:              Index into the ALS gain table.
+ *  @als_gain_trim:         default gain trim to account for
+ *                          aperture effects.
+ *  @wait_time:             Time between PRX and ALS cycles
+ *                          in 2.7 periods
+ *  @prx_time:              5.2ms prox integration time -
+ *                          decrease in 2.7ms periods
+ *  @prx_gain:              Proximity gain index
+ *  @prox_config:           Prox configuration filters.
+ *  @als_cal_target:        Known external ALS reading for
+ *                          calibration.
+ *  @interrupts_en:         Enable/Disable - 0x00 = none, 0x10 = als,
+ *                                           0x20 = prx,  0x30 = bth
+ *  @persistence:           H/W Filters, Number of 'out of limits'
+ *                          ADC readings PRX/ALS.
+ *  @als_thresh_low:        CH0 'low' count to trigger interrupt.
+ *  @als_thresh_high:       CH0 'high' count to trigger interrupt.
+ *  @prox_thres_low:        Low threshold proximity detection.
+ *  @prox_thres_high:       High threshold proximity detection
+ *  @prox_pulse_count:      Number if proximity emitter pulses
+ *  @prox_max_samples_cal:  Used for prox cal.
+ */
+struct tsl2x7x_settings {
+	int als_time;
+	int als_gain;
+	int als_gain_trim;
+	int wait_time;
+	int prx_time;
+	int prox_gain;
+	int prox_config;
+	int als_cal_target;
+	u8  interrupts_en;
+	u8  persistence;
+	int als_thresh_low;
+	int als_thresh_high;
+	int prox_thres_low;
+	int prox_thres_high;
+	int prox_pulse_count;
+	int prox_max_samples_cal;
+};
+
+/**
+ * struct tsl2X7X_platform_data - Platform callback, glass and defaults
+ * @platform_power:            Suspend/resume platform callback
+ * @power_on:                  Power on callback
+ * @power_off:                 Power off callback
+ * @platform_lux_table:        Device specific glass coefficents
+ * @platform_default_settings: Device specific power on defaults
+ *
+ */
+struct tsl2X7X_platform_data {
+	int (*platform_power)(struct device *dev, pm_message_t);
+	int (*power_on)      (struct iio_dev *indio_dev);
+	int (*power_off)     (struct i2c_client *dev);
+	struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
+	struct tsl2x7x_settings *platform_default_settings;
+};
+
+#endif /* __TSL2X7X_H */
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
new file mode 100755
index 000000000000..efbc4d27e794
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -0,0 +1,2082 @@
+/*
+ * Device driver for monitoring ambient light intensity in (lux)
+ * and proximity detection (prox) within the TAOS TSL2X7X family of devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA        02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include "tsl2x7x.h"
+
+/* Cal defs*/
+#define PROX_STAT_CAL        0
+#define PROX_STAT_SAMP       1
+#define MAX_SAMPLES_CAL      200
+
+/* TSL2X7X Device ID */
+#define TRITON_ID    0x00
+#define SWORDFISH_ID 0x30
+#define HALIBUT_ID   0x20
+
+/* Lux calculation constants */
+#define TSL2X7X_LUX_CALC_OVER_FLOW     65535
+
+/* TAOS Register definitions - note:
+ * depending on device, some of these register are not used and the
+ * register address is benign.
+ */
+/* 2X7X register offsets */
+#define TSL2X7X_MAX_CONFIG_REG         16
+
+/* Device Registers and Masks */
+#define TSL2X7X_CNTRL                  0x00
+#define TSL2X7X_ALS_TIME               0X01
+#define TSL2X7X_PRX_TIME               0x02
+#define TSL2X7X_WAIT_TIME              0x03
+#define TSL2X7X_ALS_MINTHRESHLO        0X04
+#define TSL2X7X_ALS_MINTHRESHHI        0X05
+#define TSL2X7X_ALS_MAXTHRESHLO        0X06
+#define TSL2X7X_ALS_MAXTHRESHHI        0X07
+#define TSL2X7X_PRX_MINTHRESHLO        0X08
+#define TSL2X7X_PRX_MINTHRESHHI        0X09
+#define TSL2X7X_PRX_MAXTHRESHLO        0X0A
+#define TSL2X7X_PRX_MAXTHRESHHI        0X0B
+#define TSL2X7X_PERSISTENCE            0x0C
+#define TSL2X7X_PRX_CONFIG             0x0D
+#define TSL2X7X_PRX_COUNT              0x0E
+#define TSL2X7X_GAIN                   0x0F
+#define TSL2X7X_NOTUSED                0x10
+#define TSL2X7X_REVID                  0x11
+#define TSL2X7X_CHIPID                 0x12
+#define TSL2X7X_STATUS                 0x13
+#define TSL2X7X_ALS_CHAN0LO            0x14
+#define TSL2X7X_ALS_CHAN0HI            0x15
+#define TSL2X7X_ALS_CHAN1LO            0x16
+#define TSL2X7X_ALS_CHAN1HI            0x17
+#define TSL2X7X_PRX_LO                 0x18
+#define TSL2X7X_PRX_HI                 0x19
+
+/* tsl2X7X cmd reg masks */
+#define TSL2X7X_CMD_REG                0x80
+#define TSL2X7X_CMD_SPL_FN             0x60
+
+#define TSL2X7X_CMD_PROX_INT_CLR       0X05
+#define TSL2X7X_CMD_ALS_INT_CLR        0x06
+#define TSL2X7X_CMD_PROXALS_INT_CLR    0X07
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_ADC_ENBL          0x02
+#define TSL2X7X_CNTL_PWR_ON            0x01
+
+/* tsl2X7X status reg masks */
+#define TSL2X7X_STA_ADC_VALID          0x01
+#define TSL2X7X_STA_PRX_VALID          0x02
+#define TSL2X7X_STA_ADC_PRX_VALID      (TSL2X7X_STA_ADC_VALID |\
+					TSL2X7X_STA_PRX_VALID)
+#define TSL2X7X_STA_ALS_INTR           0x10
+#define TSL2X7X_STA_PRX_INTR           0x20
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_REG_CLEAR         0x00
+#define TSL2X7X_CNTL_PROX_INT_ENBL     0X20
+#define TSL2X7X_CNTL_ALS_INT_ENBL      0X10
+#define TSL2X7X_CNTL_WAIT_TMR_ENBL     0X08
+#define TSL2X7X_CNTL_PROX_DET_ENBL     0X04
+#define TSL2X7X_CNTL_PWRON             0x01
+#define TSL2X7X_CNTL_ALSPON_ENBL       0x03
+#define TSL2X7X_CNTL_INTALSPON_ENBL    0x13
+#define TSL2X7X_CNTL_PROXPON_ENBL      0x0F
+#define TSL2X7X_CNTL_INTPROXPON_ENBL   0x2F
+
+/*Prox diode to use */
+#define TSL2X7X_DIODE0                 0x10
+#define TSL2X7X_DIODE1                 0x20
+#define TSL2X7X_DIODE_BOTH             0x30
+
+/* LED Power */
+#define TSL2X7X_mA100                  0x00
+#define TSL2X7X_mA50                   0x40
+#define TSL2X7X_mA25                   0x80
+#define TSL2X7X_mA13                   0xD0
+#define TSL2X7X_MAX_TIMER_CNT          (0xFF)
+
+/*Common device IIO EventMask */
+#define TSL2X7X_EVENT_MASK \
+		(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
+		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)),
+
+#define TSL2X7X_MIN_ITIME 3
+
+/* TAOS txx2x7x Device family members */
+enum {
+	tsl2571,
+	tsl2671,
+	tmd2671,
+	tsl2771,
+	tmd2771,
+	tsl2572,
+	tsl2672,
+	tmd2672,
+	tsl2772,
+	tmd2772
+};
+
+enum {
+	TSL2X7X_CHIP_UNKNOWN = 0,
+	TSL2X7X_CHIP_WORKING = 1,
+	TSL2X7X_CHIP_SUSPENDED = 2
+};
+
+struct tsl2x7x_parse_result {
+	int integer;
+	int fract;
+};
+
+/* Per-device data */
+struct tsl2x7x_als_info {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 lux;
+};
+
+struct tsl2x7x_prox_stat {
+	int min;
+	int max;
+	int mean;
+	unsigned long stddev;
+};
+
+struct tsl2x7x_chip_info {
+	int chan_table_elements;
+	struct iio_chan_spec		channel[4];
+	const struct iio_info		*info;
+};
+
+struct tsl2X7X_chip {
+	kernel_ulong_t id;
+	struct mutex prox_mutex;
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	u16 prox_data;
+	struct tsl2x7x_als_info als_cur_info;
+	struct tsl2x7x_settings tsl2x7x_settings;
+	struct tsl2X7X_platform_data *pdata;
+	int als_time_scale;
+	int als_saturation;
+	int tsl2x7x_chip_status;
+	u8 tsl2x7x_config[TSL2X7X_MAX_CONFIG_REG];
+	const struct tsl2x7x_chip_info	*chip_info;
+	const struct iio_info *info;
+	s64 event_timestamp;
+	/* This structure is intentionally large to accommodate
+	 * updates via sysfs. */
+	/* Sized to 9 = max 8 segments + 1 termination segment */
+	struct tsl2x7x_lux tsl2x7x_device_lux[TSL2X7X_MAX_LUX_TABLE_SIZE];
+};
+
+/* Different devices require different coefficents */
+static const struct tsl2x7x_lux tsl2x71_lux_table[] = {
+	{ 14461,   611,   1211 },
+	{ 18540,   352,    623 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tmd2x71_lux_table[] = {
+	{ 11635,   115,    256 },
+	{ 15536,    87,    179 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tsl2x72_lux_table[] = {
+	{ 14013,   466,   917 },
+	{ 18222,   310,   552 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux tmd2x72_lux_table[] = {
+	{ 13218,   130,   262 },
+	{ 17592,   92,    169 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
+	[tsl2571] =	tsl2x71_lux_table,
+	[tsl2671] =	tsl2x71_lux_table,
+	[tmd2671] =	tmd2x71_lux_table,
+	[tsl2771] =	tsl2x71_lux_table,
+	[tmd2771] =	tmd2x71_lux_table,
+	[tsl2572] =	tsl2x72_lux_table,
+	[tsl2672] =	tsl2x72_lux_table,
+	[tmd2672] =	tmd2x72_lux_table,
+	[tsl2772] =	tsl2x72_lux_table,
+	[tmd2772] =	tmd2x72_lux_table,
+};
+
+static const struct tsl2x7x_settings tsl2x7x_default_settings = {
+	.als_time = 219, /* 101 ms */
+	.als_gain = 0,
+	.prx_time = 254, /* 5.4 ms */
+	.prox_gain = 1,
+	.wait_time = 245,
+	.prox_config = 0,
+	.als_gain_trim = 1000,
+	.als_cal_target = 150,
+	.als_thresh_low = 200,
+	.als_thresh_high = 256,
+	.persistence = 255,
+	.interrupts_en = 0,
+	.prox_thres_low  = 0,
+	.prox_thres_high = 512,
+	.prox_max_samples_cal = 30,
+	.prox_pulse_count = 8
+};
+
+static const s16 tsl2X7X_als_gainadj[] = {
+	1,
+	8,
+	16,
+	120
+};
+
+static const s16 tsl2X7X_prx_gainadj[] = {
+	1,
+	2,
+	4,
+	8
+};
+
+/* Channel variations */
+enum {
+	ALS,
+	PRX,
+	ALSPRX,
+	PRX2,
+	ALSPRX2,
+};
+
+static const u8 device_channel_config[] = {
+	ALS,
+	PRX,
+	PRX,
+	ALSPRX,
+	ALSPRX,
+	ALS,
+	PRX2,
+	PRX2,
+	ALSPRX2,
+	ALSPRX2
+};
+
+/**
+ * tsl2x7x_parse_buffer() - parse a decimal result from a buffer.
+ * @*buf:                   pointer to char buffer to parse
+ * @*result:                pointer to buffer to contain
+ *                          resulting interger / decimal as ints.
+ *
+ */
+static int
+tsl2x7x_parse_buffer(const char *buf, struct tsl2x7x_parse_result *result)
+{
+	int integer = 0, fract = 0, fract_mult = 100000;
+	bool integer_part = true, negative = false;
+
+	if (buf[0] == '-') {
+		negative = true;
+		buf++;
+	}
+
+	while (*buf) {
+		if ('0' <= *buf && *buf <= '9') {
+			if (integer_part)
+				integer = integer*10 + *buf - '0';
+			else {
+				fract += fract_mult*(*buf - '0');
+				if (fract_mult == 1)
+					break;
+				fract_mult /= 10;
+			}
+		} else if (*buf == '\n') {
+			if (*(buf + 1) == '\0')
+				break;
+			else
+				return -EINVAL;
+		} else if (*buf == '.') {
+			integer_part = false;
+		} else {
+			return -EINVAL;
+		}
+		buf++;
+	}
+	if (negative) {
+		if (integer)
+			integer = -integer;
+		else
+			fract = -fract;
+	}
+
+	result->integer = integer;
+	result->fract = fract;
+
+	return 0;
+}
+
+/**
+ * tsl2x7x_i2c_read() - Read a byte from a register.
+ * @client:	i2c client
+ * @reg:	device register to read from
+ * @*val:	pointer to location to store register contents.
+ *
+ */
+static int
+tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+	int ret = 0;
+
+	/* select register to write */
+	ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg));
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: failed to write register %x\n"
+				, __func__, reg);
+		return ret;
+	}
+
+	/* read the data */
+	ret = i2c_smbus_read_byte(client);
+	if (ret >= 0)
+		*val = (u8)ret;
+	else
+		dev_err(&client->dev, "%s: failed to read register %x\n"
+						, __func__, reg);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_get_lux() - Reads and calculates current lux value.
+ * @indio_dev:	pointer to IIO device
+ *
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. Array tsl2x7x_device_lux[]
+ * is then scanned to find the first ratio value that is just above the ratio
+ * we just calculated. The ch0 and ch1 multiplier constants in the array are
+ * then used along with the time scale factor array values, to calculate the
+ * lux.
+ */
+static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
+{
+	u16 ch0, ch1; /* separated ch0/ch1 data from device */
+	u32 lux; /* raw lux calculated from device data */
+	u64 lux64;
+	u32 ratio;
+	u8 buf[4];
+	struct tsl2x7x_lux *p;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int i, ret;
+	u32 ch0lux = 0;
+	u32 ch1lux = 0;
+
+	if (mutex_trylock(&chip->als_mutex) == 0)
+		return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
+
+	if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) {
+		/* device is not enabled */
+		dev_err(&chip->client->dev, "%s: device is not enabled\n",
+				__func__);
+		ret = -EBUSY ;
+		goto out_unlock;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &buf[0]);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: Failed to read STATUS Reg\n", __func__);
+		goto out_unlock;
+	}
+	/* is data new & valid */
+	if (!(buf[0] & TSL2X7X_STA_ADC_VALID)) {
+		dev_err(&chip->client->dev,
+			"%s: data not valid yet\n", __func__);
+		ret = chip->als_cur_info.lux; /* return LAST VALUE */
+		goto out_unlock;
+	}
+
+	for (i = 0; i < 4; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i)),
+			&buf[i]);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: failed to read. err=%x\n", __func__, ret);
+			goto out_unlock;
+		}
+	}
+
+	/* clear any existing interrupt status */
+	ret = i2c_smbus_write_byte(chip->client,
+		(TSL2X7X_CMD_REG |
+				TSL2X7X_CMD_SPL_FN |
+				TSL2X7X_CMD_ALS_INT_CLR));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: i2c_write_command failed - err = %d\n",
+			__func__, ret);
+		goto out_unlock; /* have no data, so return failure */
+	}
+
+	/* extract ALS/lux data */
+	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+	chip->als_cur_info.als_ch0 = ch0;
+	chip->als_cur_info.als_ch1 = ch1;
+
+	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) {
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+		goto return_max;
+	}
+
+	if (ch0 == 0) {
+		/* have no data, so return LAST VALUE */
+		ret = chip->als_cur_info.lux;
+		goto out_unlock;
+	}
+	/* calculate ratio */
+	ratio = (ch1 << 15) / ch0;
+	/* convert to unscaled lux using the pointer to the table */
+	p = (struct tsl2x7x_lux *) chip->tsl2x7x_device_lux;
+	while (p->ratio != 0 && p->ratio < ratio)
+		p++;
+
+	if (p->ratio == 0) {
+		lux = 0;
+	} else {
+		ch0lux = DIV_ROUND_UP((ch0 * p->ch0),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		ch1lux = DIV_ROUND_UP((ch1 * p->ch1),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		lux = ch0lux - ch1lux;
+	}
+
+	/* note: lux is 31 bit max at this point */
+	if (ch1lux > ch0lux) {
+		dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n");
+		ret = chip->als_cur_info.lux;
+		goto out_unlock;
+	}
+
+	/* adjust for active time scale */
+	if (chip->als_time_scale == 0)
+		lux = 0;
+	else
+		lux = (lux + (chip->als_time_scale >> 1)) /
+			chip->als_time_scale;
+
+	/* adjust for active gain scale
+	 * The tsl2x7x_device_lux tables have a factor of 256 built-in.
+	 * User-specified gain provides a multiplier.
+	 * Apply user-specified gain before shifting right to retain precision.
+	 * Use 64 bits to avoid overflow on multiplication.
+	 * Then go back to 32 bits before division to avoid using div_u64().
+	 */
+
+	lux64 = lux;
+	lux64 = lux64 * chip->tsl2x7x_settings.als_gain_trim;
+	lux64 >>= 8;
+	lux = lux64;
+	lux = (lux + 500) / 1000;
+
+	if (lux > TSL2X7X_LUX_CALC_OVER_FLOW) /* check for overflow */
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+
+	/* Update the structure with the latest lux. */
+return_max:
+	chip->als_cur_info.lux = lux;
+	ret = lux;
+
+out_unlock:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_get_prox() - Reads proximity data registers and updates
+ *                      chip->prox_data.
+ *
+ * @indio_dev:	pointer to IIO device
+ */
+static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret;
+	u8 status;
+	u8 chdata[2];
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (mutex_trylock(&chip->prox_mutex) == 0) {
+		dev_err(&chip->client->dev,
+			"%s: Can't get prox mutex\n", __func__);
+		return -EBUSY;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &status);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: i2c err=%d\n", __func__, ret);
+		goto prox_poll_err;
+	}
+
+	switch (chip->id) {
+	case tsl2571:
+	case tsl2671:
+	case tmd2671:
+	case tsl2771:
+	case tmd2771:
+		if (!(status & TSL2X7X_STA_ADC_VALID))
+			goto prox_poll_err;
+	break;
+	case tsl2572:
+	case tsl2672:
+	case tmd2672:
+	case tsl2772:
+	case tmd2772:
+		if (!(status & TSL2X7X_STA_PRX_VALID))
+			goto prox_poll_err;
+	break;
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG |
+					(TSL2X7X_PRX_LO + i)), &chdata[i]);
+		if (ret < 0)
+			goto prox_poll_err;
+	}
+
+	chip->prox_data =
+			le16_to_cpup((const __le16 *)&chdata[0]);
+
+prox_poll_err:
+
+	mutex_unlock(&chip->prox_mutex);
+
+	return chip->prox_data;
+}
+
+/**
+ * tsl2x7x_defaults() - Populates the device nominal operating parameters
+ *                      with those provided by a 'platform' data struct or
+ *                      with prefined defaults.
+ *
+ * @chip:               pointer to device structure.
+ */
+static void tsl2x7x_defaults(struct tsl2X7X_chip *chip)
+{
+	/* If Operational settings defined elsewhere.. */
+	if (chip->pdata && chip->pdata->platform_default_settings != 0)
+		memcpy(&(chip->tsl2x7x_settings),
+			chip->pdata->platform_default_settings,
+			sizeof(tsl2x7x_default_settings));
+	else
+		memcpy(&(chip->tsl2x7x_settings),
+			&tsl2x7x_default_settings,
+			sizeof(tsl2x7x_default_settings));
+
+	/* Load up the proper lux table. */
+	if (chip->pdata && chip->pdata->platform_lux_table[0].ratio != 0)
+		memcpy(chip->tsl2x7x_device_lux,
+			chip->pdata->platform_lux_table,
+			sizeof(chip->pdata->platform_lux_table));
+	else
+		memcpy(chip->tsl2x7x_device_lux,
+		(struct tsl2x7x_lux *)tsl2x7x_default_lux_table_group[chip->id],
+				MAX_DEFAULT_TABLE_BYTES);
+}
+
+/**
+ * tsl2x7x_als_calibrate() -	Obtain single reading and calculate
+ *                              the als_gain_trim.
+ *
+ * @indio_dev:	pointer to IIO device
+ */
+static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val;
+	int gain_trim_val;
+	int ret;
+	int lux_val;
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to write CNTRL register, ret=%d\n",
+		__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON))
+		!= (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) {
+		dev_err(&chip->client->dev,
+			"%s: failed: ADC not enabled\n", __func__);
+		return -1;
+	}
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to write ctrl reg: ret=%d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & TSL2X7X_STA_ADC_VALID) != TSL2X7X_STA_ADC_VALID) {
+		dev_err(&chip->client->dev,
+			"%s: failed: STATUS - ADC not valid.\n", __func__);
+		return -ENODATA;
+	}
+
+	lux_val = tsl2x7x_get_lux(indio_dev);
+	if (lux_val < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to get lux\n", __func__);
+		return lux_val;
+	}
+
+	gain_trim_val =  (((chip->tsl2x7x_settings.als_cal_target)
+			* chip->tsl2x7x_settings.als_gain_trim) / lux_val);
+	if ((gain_trim_val < 250) || (gain_trim_val > 4000))
+		return -ERANGE;
+
+	chip->tsl2x7x_settings.als_gain_trim = gain_trim_val;
+	dev_info(&chip->client->dev,
+		"%s als_calibrate completed\n", chip->client->name);
+
+	return (int) gain_trim_val;
+}
+
+static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret = 0;
+	u8 *dev_reg;
+	u8 utmp;
+	int als_count;
+	int als_time;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val = 0;
+
+	if (chip->pdata && chip->pdata->power_on)
+		chip->pdata->power_on(indio_dev);
+
+	/* Non calculated parameters */
+	chip->tsl2x7x_config[TSL2X7X_PRX_TIME] =
+			chip->tsl2x7x_settings.prx_time;
+	chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] =
+			chip->tsl2x7x_settings.wait_time;
+	chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] =
+			chip->tsl2x7x_settings.prox_config;
+
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_low) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_low >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_high) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_high >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_PERSISTENCE] =
+		chip->tsl2x7x_settings.persistence;
+
+	chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] =
+			chip->tsl2x7x_settings.prox_pulse_count;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] =
+	chip->tsl2x7x_settings.prox_thres_low;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] =
+			chip->tsl2x7x_settings.prox_thres_high;
+
+	/* and make sure we're not already on */
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		/* if forcing a register update - turn off, then on */
+		dev_info(&chip->client->dev, "device is already enabled\n");
+		return -EINVAL;
+	}
+
+	/* determine als integration regster */
+	als_count = (chip->tsl2x7x_settings.als_time * 100 + 135) / 270;
+	if (als_count == 0)
+		als_count = 1; /* ensure at least one cycle */
+
+	/* convert back to time (encompasses overrides) */
+	als_time = (als_count * 27 + 5) / 10;
+	chip->tsl2x7x_config[TSL2X7X_ALS_TIME] = 256 - als_count;
+
+	/* Set the gain based on tsl2x7x_settings struct */
+	chip->tsl2x7x_config[TSL2X7X_GAIN] =
+		(chip->tsl2x7x_settings.als_gain |
+			(TSL2X7X_mA100 | TSL2X7X_DIODE1)
+			| ((chip->tsl2x7x_settings.prox_gain) << 2));
+
+	/* set chip struct re scaling and saturation */
+	chip->als_saturation = als_count * 922; /* 90% of full scale */
+	chip->als_time_scale = (als_time + 25) / 50;
+
+	/* TSL2X7X Specific power-on / adc enable sequence
+	 * Power on the device 1st. */
+	utmp = TSL2X7X_CNTL_PWR_ON;
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on CNTRL reg.\n", __func__);
+		return ret;
+	}
+
+	/* Use the following shadow copy for our delay before enabling ADC.
+	 * Write all the registers. */
+	for (i = 0, dev_reg = chip->tsl2x7x_config;
+			i < TSL2X7X_MAX_CONFIG_REG; i++) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+				TSL2X7X_CMD_REG + i, *dev_reg++);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+			"%s: failed on write to reg %d.\n", __func__, i);
+			return ret;
+		}
+	}
+
+	mdelay(3);	/* Power-on settling time */
+
+	/* NOW enable the ADC
+	 * initialize the desired mode of operation */
+	utmp = TSL2X7X_CNTL_PWR_ON |
+			TSL2X7X_CNTL_ADC_ENBL |
+			TSL2X7X_CNTL_PROX_DET_ENBL;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on 2nd CTRL reg.\n", __func__);
+		return ret;
+	}
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
+
+	if (chip->tsl2x7x_settings.interrupts_en != 0) {
+		dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
+
+		reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
+		if ((chip->tsl2x7x_settings.interrupts_en == 0x20) ||
+			(chip->tsl2x7x_settings.interrupts_en == 0x30))
+			reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
+
+		reg_val |= chip->tsl2x7x_settings.interrupts_en;
+		ret = i2c_smbus_write_byte_data(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL), reg_val);
+		if (ret < 0)
+			dev_err(&chip->client->dev,
+				"%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
+				__func__);
+
+		/* Clear out any initial interrupts  */
+		ret = i2c_smbus_write_byte(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+			TSL2X7X_CMD_PROXALS_INT_CLR);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: Failed to clear Int status\n",
+				__func__);
+		return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	/* turn device off */
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
+
+	if (chip->pdata && chip->pdata->power_off)
+		chip->pdata->power_off(chip->client);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_invoke_change
+ * @indio_dev:	pointer to IIO device
+ *
+ * Obtain and lock both ALS and PROX resources,
+ * determine and save device state (On/Off),
+ * cycle device to implement updated parameter,
+ * put device back into proper state, and unlock
+ * resource.
+ */
+static
+int tsl2x7x_invoke_change(struct iio_dev *indio_dev)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int device_status = chip->tsl2x7x_chip_status;
+
+	mutex_lock(&chip->als_mutex);
+	mutex_lock(&chip->prox_mutex);
+
+	if (device_status == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	tsl2x7x_chip_on(indio_dev);
+
+	if (device_status != TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	mutex_unlock(&chip->prox_mutex);
+	mutex_unlock(&chip->als_mutex);
+
+	return 0;
+}
+
+static
+void tsl2x7x_prox_calculate(int *data, int length,
+		struct tsl2x7x_prox_stat *statP)
+{
+	int i;
+	int sample_sum;
+	int tmp;
+
+	if (length == 0)
+		length = 1;
+
+	sample_sum = 0;
+	statP->min = INT_MAX;
+	statP->max = INT_MIN;
+	for (i = 0; i < length; i++) {
+		sample_sum += data[i];
+		statP->min = min(statP->min, data[i]);
+		statP->max = max(statP->max, data[i]);
+	}
+
+	statP->mean = sample_sum / length;
+	sample_sum = 0;
+	for (i = 0; i < length; i++) {
+		tmp = data[i] - statP->mean;
+		sample_sum += tmp * tmp;
+	}
+	statP->stddev = int_sqrt((long)sample_sum)/length;
+}
+
+/**
+ * tsl2x7x_prox_cal() - Calculates std. and sets thresholds.
+ * @indio_dev:	pointer to IIO device
+ *
+ * Calculates a standard deviation based on the samples,
+ * and sets the threshold accordingly.
+ */
+static void tsl2x7x_prox_cal(struct iio_dev *indio_dev)
+{
+	int prox_history[MAX_SAMPLES_CAL + 1];
+	int i;
+	struct tsl2x7x_prox_stat prox_stat_data[2];
+	struct tsl2x7x_prox_stat *calP;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 tmp_irq_settings;
+	u8 current_state = chip->tsl2x7x_chip_status;
+
+	if (chip->tsl2x7x_settings.prox_max_samples_cal > MAX_SAMPLES_CAL) {
+		dev_err(&chip->client->dev,
+			"%s: max prox samples cal is too big: %d\n",
+			__func__, chip->tsl2x7x_settings.prox_max_samples_cal);
+		chip->tsl2x7x_settings.prox_max_samples_cal = MAX_SAMPLES_CAL;
+	}
+
+	/* have to stop to change settings */
+	tsl2x7x_chip_off(indio_dev);
+
+	/* Enable proximity detection save just in case prox not wanted yet*/
+	tmp_irq_settings = chip->tsl2x7x_settings.interrupts_en;
+	chip->tsl2x7x_settings.interrupts_en |= TSL2X7X_CNTL_PROX_INT_ENBL;
+
+	/*turn on device if not already on*/
+	tsl2x7x_chip_on(indio_dev);
+
+	/*gather the samples*/
+	for (i = 0; i < chip->tsl2x7x_settings.prox_max_samples_cal; i++) {
+		mdelay(15);
+		tsl2x7x_get_prox(indio_dev);
+		prox_history[i] = chip->prox_data;
+		dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
+			i, chip->prox_data);
+	}
+
+	tsl2x7x_chip_off(indio_dev);
+	calP = &prox_stat_data[PROX_STAT_CAL];
+	tsl2x7x_prox_calculate(prox_history,
+		chip->tsl2x7x_settings.prox_max_samples_cal, calP);
+	chip->tsl2x7x_settings.prox_thres_high = (calP->max << 1) - calP->mean;
+
+	dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
+		calP->min, calP->mean, calP->max);
+	dev_info(&chip->client->dev,
+		"%s proximity threshold set to %d\n",
+		chip->client->name, chip->tsl2x7x_settings.prox_thres_high);
+
+	/* back to the way they were */
+	chip->tsl2x7x_settings.interrupts_en = tmp_irq_settings;
+	if (current_state == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_on(indio_dev);
+}
+
+static ssize_t tsl2x7x_power_state_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", chip->tsl2x7x_chip_status);
+}
+
+static ssize_t tsl2x7x_power_state_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_chip_on(indio_dev);
+	else
+		tsl2x7x_chip_off(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+
+	switch (chip->id) {
+	case tsl2571:
+	case tsl2671:
+	case tmd2671:
+	case tsl2771:
+	case tmd2771:
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128");
+	break;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120");
+}
+
+static ssize_t tsl2x7x_prox_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 2 4 8");
+}
+
+static ssize_t tsl2x7x_als_time_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int y, z;
+
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	y /= 1000;
+	z %= 1000;
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_als_time_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	struct tsl2x7x_parse_result result;
+
+	result.integer = 0;
+	result.fract = 0;
+
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	result.fract /= 3;
+	chip->tsl2x7x_settings.als_time =
+			(TSL2X7X_MAX_TIMER_CNT - (u8)result.fract);
+
+	dev_info(&chip->client->dev, "%s: als time = %d",
+		__func__, chip->tsl2x7x_settings.als_time);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static IIO_CONST_ATTR(in_illuminance0_integration_time_available,
+		".00272 - .696");
+
+static ssize_t tsl2x7x_als_cal_target_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			chip->tsl2x7x_settings.als_cal_target);
+}
+
+static ssize_t tsl2x7x_als_cal_target_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	unsigned long value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	if (value)
+		chip->tsl2x7x_settings.als_cal_target = value;
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+/* persistence settings */
+static ssize_t tsl2x7x_als_persistence_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int y, z, filter_delay;
+
+	/* Determine integration time */
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	filter_delay = z * (chip->tsl2x7x_settings.persistence & 0x0F);
+	y = (filter_delay / 1000);
+	z = (filter_delay % 1000);
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_als_persistence_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	struct tsl2x7x_parse_result result;
+	int y, z, filter_delay;
+
+	result.integer = 0;
+	result.fract = 0;
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+
+	filter_delay =
+		DIV_ROUND_UP(((result.integer * 1000) + result.fract), z);
+
+	chip->tsl2x7x_settings.persistence &= 0xF0;
+	chip->tsl2x7x_settings.persistence |= (filter_delay & 0x0F);
+
+	dev_info(&chip->client->dev, "%s: als persistence = %d",
+		__func__, filter_delay);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static ssize_t tsl2x7x_prox_persistence_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int y, z, filter_delay;
+
+	/* Determine integration time */
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	filter_delay = z * ((chip->tsl2x7x_settings.persistence & 0xF0) >> 4);
+	y = (filter_delay / 1000);
+	z = (filter_delay % 1000);
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_prox_persistence_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	struct tsl2x7x_parse_result result;
+	int y, z, filter_delay;
+
+	result.integer = 0;
+	result.fract = 0;
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+
+	filter_delay =
+		DIV_ROUND_UP(((result.integer * 1000) + result.fract), z);
+
+	chip->tsl2x7x_settings.persistence &= 0x0F;
+	chip->tsl2x7x_settings.persistence |= ((filter_delay << 4) & 0xF0);
+
+	dev_info(&chip->client->dev, "%s: prox persistence = %d",
+		__func__, filter_delay);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static ssize_t tsl2x7x_do_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_als_calibrate(indio_dev);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_luxtable_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int i = 0;
+	int offset = 0;
+
+	while (i < (TSL2X7X_MAX_LUX_TABLE_SIZE * 3)) {
+		offset += snprintf(buf + offset, PAGE_SIZE, "%d,%d,%d,",
+			chip->tsl2x7x_device_lux[i].ratio,
+			chip->tsl2x7x_device_lux[i].ch0,
+			chip->tsl2x7x_device_lux[i].ch1);
+		if (chip->tsl2x7x_device_lux[i].ratio == 0) {
+			/* We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break. */
+			offset--;
+			break;
+		}
+		i++;
+	}
+
+	offset += snprintf(buf + offset, PAGE_SIZE, "\n");
+	return offset;
+}
+
+static ssize_t tsl2x7x_luxtable_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(dev_get_drvdata(dev));
+	int value[ARRAY_SIZE(chip->tsl2x7x_device_lux)*3 + 1];
+	int n;
+
+	get_options(buf, ARRAY_SIZE(value), value);
+
+	/* We now have an array of ints starting at value[1], and
+	 * enumerated by value[0].
+	 * We expect each group of three ints is one table entry,
+	 * and the last table entry is all 0.
+	 */
+	n = value[0];
+	if ((n % 3) || n < 6 ||
+			n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	/* Zero out the table */
+	memset(chip->tsl2x7x_device_lux, 0, sizeof(chip->tsl2x7x_device_lux));
+	memcpy(chip->tsl2x7x_device_lux, &value[1], (value[0] * 4));
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_do_prox_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_prox_cal(indio_dev);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
+					 u64 event_code)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY)
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x10);
+	else
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x20);
+
+	return ret;
+}
+
+static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
+					  u64 event_code,
+					  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x10;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x20;
+	} else {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x20;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x10;
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static int tsl2x7x_write_thresh(struct iio_dev *indio_dev,
+				  u64 event_code,
+				  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.als_thresh_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.als_thresh_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.prox_thres_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.prox_thres_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static int tsl2x7x_read_thresh(struct iio_dev *indio_dev,
+			       u64 event_code,
+			       int *val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.als_thresh_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.als_thresh_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.prox_thres_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.prox_thres_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long mask)
+{
+	int ret = -EINVAL;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			tsl2x7x_get_lux(indio_dev);
+			*val = chip->als_cur_info.lux;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+			tsl2x7x_get_lux(indio_dev);
+			if (chan->channel == 0)
+				*val = chip->als_cur_info.als_ch0;
+			else
+				*val = chip->als_cur_info.als_ch1;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_PROXIMITY:
+			tsl2x7x_get_prox(indio_dev);
+			*val = chip->prox_data;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT)
+			*val =
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain];
+		else
+			*val =
+			tsl2X7X_prx_gainadj[chip->tsl2x7x_settings.prox_gain];
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*val = chip->tsl2x7x_settings.als_gain_trim;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_INTENSITY) {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.als_gain = 0;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.als_gain = 1;
+				break;
+			case 16:
+				chip->tsl2x7x_settings.als_gain = 2;
+				break;
+			case 120:
+				switch (chip->id) {
+				case tsl2572:
+				case tsl2672:
+				case tmd2672:
+				case tsl2772:
+				case tmd2772:
+					return -EINVAL;
+				break;
+				}
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			case 128:
+				switch (chip->id) {
+				case tsl2571:
+				case tsl2671:
+				case tmd2671:
+				case tsl2771:
+				case tmd2771:
+					return -EINVAL;
+				break;
+				}
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.prox_gain = 0;
+				break;
+			case 2:
+				chip->tsl2x7x_settings.prox_gain = 1;
+				break;
+			case 4:
+				chip->tsl2x7x_settings.prox_gain = 2;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.prox_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		chip->tsl2x7x_settings.als_gain_trim = val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+		tsl2x7x_power_state_show, tsl2x7x_power_state_store);
+
+static DEVICE_ATTR(in_proximity0_calibscale_available, S_IRUGO,
+		tsl2x7x_prox_gain_available_show, NULL);
+
+static DEVICE_ATTR(in_illuminance0_calibscale_available, S_IRUGO,
+		tsl2x7x_gain_available_show, NULL);
+
+static DEVICE_ATTR(in_illuminance0_integration_time, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_time_show, tsl2x7x_als_time_store);
+
+static DEVICE_ATTR(in_illuminance0_target_input, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_cal_target_show, tsl2x7x_als_cal_target_store);
+
+static DEVICE_ATTR(in_illuminance0_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_calibrate);
+
+static DEVICE_ATTR(in_proximity0_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_prox_calibrate);
+
+static DEVICE_ATTR(in_illuminance0_lux_table, S_IRUGO | S_IWUSR,
+		tsl2x7x_luxtable_show, tsl2x7x_luxtable_store);
+
+static DEVICE_ATTR(in_intensity0_thresh_period, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_persistence_show, tsl2x7x_als_persistence_store);
+
+static DEVICE_ATTR(in_proximity0_thresh_period, S_IRUGO | S_IWUSR,
+		tsl2x7x_prox_persistence_show, tsl2x7x_prox_persistence_store);
+
+/* Use the default register values to identify the Taos device */
+static int tsl2x7x_device_id(unsigned char *id, int target)
+{
+	switch (target) {
+	case tsl2571:
+	case tsl2671:
+	case tsl2771:
+		return ((*id & 0xf0) == TRITON_ID);
+	break;
+	case tmd2671:
+	case tmd2771:
+		return ((*id & 0xf0) == HALIBUT_ID);
+	break;
+	case tsl2572:
+	case tsl2672:
+	case tmd2672:
+	case tsl2772:
+	case tmd2772:
+		return ((*id & 0xf0) == SWORDFISH_ID);
+	break;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns();
+	int ret;
+	u8 value;
+
+	value = i2c_smbus_read_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_STATUS);
+
+	/* What type of interrupt do we need to process */
+	if (value & TSL2X7X_STA_PRX_INTR) {
+		tsl2x7x_get_prox(indio_dev); /* freshen data for ABI */
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+						    0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+						    timestamp);
+	}
+
+	if (value & TSL2X7X_STA_ALS_INTR) {
+		tsl2x7x_get_lux(indio_dev); /* freshen data for ABI */
+		iio_push_event(indio_dev,
+		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+					    0,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_EITHER),
+					    timestamp);
+	}
+	/* Clear interrupt now that we have handled it. */
+	ret = i2c_smbus_write_byte(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+		TSL2X7X_CMD_PROXALS_INT_CLR);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: Failed to clear irq from event handler. err = %d\n",
+			__func__, ret);
+
+	return IRQ_HANDLED;
+}
+
+static struct attribute *tsl2x7x_ALS_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	&dev_attr_in_proximity0_calibscale_available.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	&dev_attr_in_proximity0_calibscale_available.attr,
+	NULL
+};
+
+static struct attribute *tsl2X7X_ALS_event_attrs[] = {
+	&dev_attr_in_intensity0_thresh_period.attr,
+	NULL,
+};
+static struct attribute *tsl2X7X_PRX_event_attrs[] = {
+	&dev_attr_in_proximity0_thresh_period.attr,
+	NULL,
+};
+
+static struct attribute *tsl2X7X_ALSPRX_event_attrs[] = {
+	&dev_attr_in_intensity0_thresh_period.attr,
+	&dev_attr_in_proximity0_thresh_period.attr,
+	NULL,
+};
+
+static const struct attribute_group tsl2X7X_device_attr_group_tbl[] = {
+	[ALS] = {
+		.attrs = tsl2x7x_ALS_device_attrs,
+	},
+	[PRX] = {
+		.attrs = tsl2x7x_PRX_device_attrs,
+	},
+	[ALSPRX] = {
+		.attrs = tsl2x7x_ALSPRX_device_attrs,
+	},
+	[PRX2] = {
+		.attrs = tsl2x7x_PRX2_device_attrs,
+	},
+	[ALSPRX2] = {
+		.attrs = tsl2x7x_ALSPRX2_device_attrs,
+	},
+};
+
+static struct attribute_group tsl2X7X_event_attr_group_tbl[] = {
+	[ALS] = {
+		.attrs = tsl2X7X_ALS_event_attrs,
+		.name = "events",
+	},
+	[PRX] = {
+		.attrs = tsl2X7X_PRX_event_attrs,
+		.name = "events",
+	},
+	[ALSPRX] = {
+		.attrs = tsl2X7X_ALSPRX_event_attrs,
+		.name = "events",
+	},
+};
+
+static const struct iio_info tsl2X7X_device_info[] = {
+	[ALS] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALS],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALS],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[PRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX2],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[PRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX2],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+};
+
+static const struct tsl2x7x_chip_info tsl2x7x_chip_info_tbl[] = {
+	[ALS] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			},
+		},
+	.chan_table_elements = 3,
+	.info = &tsl2X7X_device_info[ALS],
+	},
+	[PRX] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX],
+	},
+	[ALSPRX] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX],
+	},
+	[PRX2] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX2],
+	},
+	[ALSPRX2] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX2],
+	},
+};
+
+static int __devinit tsl2x7x_probe(struct i2c_client *clientp,
+	const struct i2c_device_id *id)
+{
+	int ret;
+	unsigned char device_id;
+	struct iio_dev *indio_dev;
+	struct tsl2X7X_chip *chip;
+
+	indio_dev = iio_device_alloc(sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = clientp;
+	i2c_set_clientdata(clientp, indio_dev);
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		TSL2X7X_CHIPID, &device_id);
+	if (ret < 0)
+		goto fail1;
+
+	if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
+		(tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
+		dev_info(&chip->client->dev,
+				"%s: i2c device found does not match expected id\n",
+				__func__);
+		goto fail1;
+	}
+
+	ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&clientp->dev, "%s: write to cmd reg failed. err = %d\n",
+				__func__, ret);
+		goto fail1;
+	}
+
+	/* ALS and PROX functions can be invoked via user space poll
+	 * or H/W interrupt. If busy return last sample. */
+	mutex_init(&chip->als_mutex);
+	mutex_init(&chip->prox_mutex);
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_UNKNOWN;
+	chip->pdata = clientp->dev.platform_data;
+	chip->id = id->driver_data;
+	chip->chip_info =
+		&tsl2x7x_chip_info_tbl[device_channel_config[id->driver_data]];
+
+	indio_dev->info = chip->chip_info->info;
+	indio_dev->dev.parent = &clientp->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+	indio_dev->channels = chip->chip_info->channel;
+	indio_dev->num_channels = chip->chip_info->chan_table_elements;
+
+	if (clientp->irq) {
+		ret = request_threaded_irq(clientp->irq,
+					   NULL,
+					   &tsl2x7x_event_handler,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "TSL2X7X_event",
+					   indio_dev);
+		if (ret) {
+			dev_err(&clientp->dev,
+				"%s: irq request failed", __func__);
+			goto fail2;
+		}
+	}
+
+	/* Load up the defaults */
+	tsl2x7x_defaults(chip);
+	/* Make sure the chip is on */
+	tsl2x7x_chip_on(indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&clientp->dev,
+			"%s: iio registration failed\n", __func__);
+		goto fail1;
+	}
+
+	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
+
+	return 0;
+
+fail1:
+	if (clientp->irq)
+		free_irq(clientp->irq, indio_dev);
+fail2:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int tsl2x7x_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		ret = tsl2x7x_chip_off(indio_dev);
+		chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+	}
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_SUSPEND};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_RESUME};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_SUSPENDED)
+		ret = tsl2x7x_chip_on(indio_dev);
+
+	return ret;
+}
+
+static int __devexit tsl2x7x_remove(struct i2c_client *client)
+{
+	struct tsl2X7X_chip *chip = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = iio_priv_to_dev(chip);
+
+	tsl2x7x_chip_off(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (client->irq)
+		free_irq(client->irq, chip->client->name);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct i2c_device_id tsl2x7x_idtable[] = {
+	{ "tsl2571", tsl2571 },
+	{ "tsl2671", tsl2671 },
+	{ "tmd2671", tmd2671 },
+	{ "tsl2771", tsl2771 },
+	{ "tmd2771", tmd2771 },
+	{ "tsl2572", tsl2572 },
+	{ "tsl2672", tsl2672 },
+	{ "tmd2672", tmd2672 },
+	{ "tsl2772", tsl2772 },
+	{ "tmd2772", tmd2772 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, tsl2x7x_idtable);
+
+static const struct dev_pm_ops tsl2x7x_pm_ops = {
+	.suspend = tsl2x7x_suspend,
+	.resume  = tsl2x7x_resume,
+};
+
+/* Driver definition */
+static struct i2c_driver tsl2x7x_driver = {
+	.driver = {
+		.name = "tsl2x7x",
+		.pm = &tsl2x7x_pm_ops,
+	},
+	.id_table = tsl2x7x_idtable,
+	.probe = tsl2x7x_probe,
+	.remove = __devexit_p(tsl2x7x_remove),
+};
+
+module_i2c_driver(tsl2x7x_driver);
+
+MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>");
+MODULE_DESCRIPTION("TAOS tsl2x7x ambient and proximity light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index ebc2d0840caf..93026c544465 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -30,8 +30,8 @@
 
 #include <linux/gpio.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 /*
  * Register definitions, as well as various shifts and masks to get at the
  * individual fields of the registers.
@@ -431,7 +431,7 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
 	struct ak8975_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		return ak8975_read_axis(indio_dev, chan->address, val);
 	case IIO_CHAN_INFO_SCALE:
 		*val = data->raw_to_gauss[chan->address];
@@ -445,7 +445,8 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
 		.type = IIO_MAGN,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
 		.address = index,					\
 	}
 
@@ -505,7 +506,7 @@ static int ak8975_probe(struct i2c_client *client,
 	}
 
 	/* Register with IIO */
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit_gpio;
@@ -536,7 +537,7 @@ static int ak8975_probe(struct i2c_client *client,
 	return 0;
 
 exit_free_iio:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit_gpio:
 	if (gpio_is_valid(eoc_gpio))
 		gpio_free(eoc_gpio);
@@ -554,7 +555,7 @@ static int ak8975_remove(struct i2c_client *client)
 	if (gpio_is_valid(data->eoc_gpio))
 		gpio_free(data->eoc_gpio);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index e00b416c4d33..3ec65180b815 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -22,8 +22,8 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define HMC5843_I2C_ADDRESS			0x1E
 
@@ -459,7 +459,7 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
 	struct hmc5843_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		return hmc5843_read_measurement(indio_dev,
 						chan->address,
 						val);
@@ -476,7 +476,8 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
 		.type = IIO_MAGN,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
 		.address = add						\
 	}
 
@@ -545,7 +546,7 @@ static int hmc5843_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int err = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit;
@@ -573,7 +574,7 @@ static int hmc5843_probe(struct i2c_client *client,
 		goto exit_free2;
 	return 0;
 exit_free2:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
@@ -585,7 +586,7 @@ static int hmc5843_remove(struct i2c_client *client)
 	iio_device_unregister(indio_dev);
 	 /*  sleep mode to save power */
 	hmc5843_configure(client, MODE_SLEEP);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index 57baac6c0d40..280331b664f4 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7753.h"
 
@@ -517,7 +517,7 @@ static int __devinit ade7753_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -546,7 +546,7 @@ static int __devinit ade7753_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -564,7 +564,7 @@ static int ade7753_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 err_ret:
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index 8d81c92007e9..59a2e3ef72b5 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7754.h"
 
@@ -540,7 +540,7 @@ static int __devinit ade7754_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -568,7 +568,7 @@ static int __devinit ade7754_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -585,7 +585,7 @@ static int ade7754_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index dcb20294dfe8..1a5c9c408141 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "meter.h"
 #include "ade7758.h"
 
@@ -662,66 +662,217 @@ static const struct attribute_group ade7758_attribute_group = {
 };
 
 static struct iio_chan_spec ade7758_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
-		0, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
-		1, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
-		2, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
-		3, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
-		4, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
-		5, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
-		6, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
-		7, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
-		8, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
-		9, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
-		10, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
-		11, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
-		12, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
-		13, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
-		14, IIO_ST('s', 24, 32, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
+		.scan_index = 2,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
+		.scan_index = 3,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
+		.scan_index = 4,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
+		.scan_index = 5,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
+		.scan_index = 6,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
+		.scan_index = 7,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
+		.scan_index = 8,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
+		.scan_index = 9,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
+		.scan_index = 10,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
+		.scan_index = 11,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
+		.scan_index = 12,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
+		.scan_index = 13,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
+		.scan_index = 14,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(15),
 };
 
@@ -734,7 +885,7 @@ static int __devinit ade7758_probe(struct spi_device *spi)
 {
 	int i, ret;
 	struct ade7758_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
@@ -800,7 +951,7 @@ static int __devinit ade7758_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq)
 		ade7758_remove_trigger(indio_dev);
 error_uninitialize_ring:
 	ade7758_uninitialize_ring(indio_dev);
@@ -811,7 +962,7 @@ error_free_tx:
 error_free_rx:
 	kfree(st->rx);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -833,7 +984,7 @@ static int ade7758_remove(struct spi_device *spi)
 	kfree(st->tx);
 	kfree(st->rx);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index c45b23bb1229..7b9be8a2cc50 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -12,9 +12,9 @@
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "ade7758.h"
 
 /**
@@ -72,7 +72,7 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p)
 			*dat32 = get_unaligned_be32(&st->rx_buf[5]) & 0xFFFFFF;
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -92,29 +92,19 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p)
 static int ade7758_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ade7758_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
+
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = st->ade7758_ring_channels[channel].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	ade7758_write_waveform_type(&indio_dev->dev,
 		st->ade7758_ring_channels[channel].address);
 
diff --git a/drivers/staging/iio/meter/ade7758_trigger.c b/drivers/staging/iio/meter/ade7758_trigger.c
index b6569c706651..f9c6a340092b 100644
--- a/drivers/staging/iio/meter/ade7758_trigger.c
+++ b/drivers/staging/iio/meter/ade7758_trigger.c
@@ -11,8 +11,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "ade7758.h"
 
 /**
@@ -63,7 +63,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev)
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->us)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -94,7 +94,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -105,5 +105,5 @@ void ade7758_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 0beab478dcd9..91add54af111 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7759.h"
 
@@ -463,7 +463,7 @@ static int __devinit ade7759_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -491,7 +491,7 @@ static int __devinit ade7759_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -507,7 +507,7 @@ static int ade7759_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
index 1e1faa0479d3..527aa97c74ae 100644
--- a/drivers/staging/iio/meter/ade7854-i2c.c
+++ b/drivers/staging/iio/meter/ade7854-i2c.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ade7854.h"
 
 static int ade7854_i2c_write_reg_8(struct device *dev,
@@ -208,7 +208,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client,
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -226,7 +226,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client,
 
 	ret = ade7854_probe(indio_dev, &client->dev);
 	if (ret)
-		iio_free_device(indio_dev);
+		iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
index 81121862c1bd..eaafaef9caec 100644
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ b/drivers/staging/iio/meter/ade7854-spi.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ade7854.h"
 
 static int ade7854_spi_write_reg_8(struct device *dev,
@@ -306,7 +306,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi)
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -325,7 +325,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi)
 
 	ret = ade7854_probe(indio_dev, &spi->dev);
 	if (ret)
-		iio_free_device(indio_dev);
+		iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 49c01c5c1b59..fa3ba01af41d 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -17,8 +17,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7854.h"
 
@@ -581,7 +581,7 @@ int ade7854_probe(struct iio_dev *indio_dev, struct device *dev)
 error_unreg_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -590,7 +590,7 @@ EXPORT_SYMBOL(ade7854_probe);
 int ade7854_remove(struct iio_dev *indio_dev)
 {
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/meter.h b/drivers/staging/iio/meter/meter.h
index 6a3db1423631..23e1b5f480a9 100644
--- a/drivers/staging/iio/meter/meter.h
+++ b/drivers/staging/iio/meter/meter.h
@@ -1,4 +1,4 @@
-#include "../sysfs.h"
+#include <linux/iio/sysfs.h>
 
 /* metering ic types of attribute */
 
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index d8ce854c1897..8b71eb0e16f5 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -19,8 +19,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad2s1200"
 
@@ -85,10 +85,12 @@ static const struct iio_chan_spec ad2s1200_channels[] = {
 		.type = IIO_ANGL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}, {
 		.type = IIO_ANGL_VEL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -110,7 +112,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi)
 						DRV_NAME, pins[pn]);
 			goto error_ret;
 		}
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -140,7 +142,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	for (--pn; pn >= 0; pn--)
 		gpio_free(pins[pn]);
@@ -150,7 +152,7 @@ error_ret:
 static int __devexit ad2s1200_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index c439fcf72be7..a236ddbee372 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -18,8 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "ad2s1210.h"
 
 #define DRV_NAME "ad2s1210"
@@ -580,10 +580,12 @@ static struct iio_chan_spec ad2s1210_channels[] = {
 		.type = IIO_ANGL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}, {
 		.type = IIO_ANGL_VEL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -688,7 +690,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi)
 	if (spi->dev.platform_data == NULL)
 		return -EINVAL;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -729,7 +731,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi)
 error_free_gpios:
 	ad2s1210_free_gpios(st);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -740,7 +742,7 @@ static int __devexit ad2s1210_remove(struct spi_device *spi)
 
 	iio_device_unregister(indio_dev);
 	ad2s1210_free_gpios(iio_priv(indio_dev));
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index 2a86f582ddf1..a8057228dca1 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 struct ad2s90_state {
 	struct mutex lock;
@@ -55,6 +55,7 @@ static const struct iio_chan_spec ad2s90_chan = {
 	.type = IIO_ANGL,
 	.indexed = 1,
 	.channel = 0,
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 };
 
 static int __devinit ad2s90_probe(struct spi_device *spi)
@@ -63,7 +64,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi)
 	struct ad2s90_state *st;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -92,7 +93,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -100,7 +101,7 @@ error_ret:
 static int __devexit ad2s90_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index b9945ec44faa..9358c6cb1c72 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -15,7 +15,7 @@
 #include <linux/sched.h>
 #include <linux/poll.h>
 #include "ring_sw.h"
-#include "trigger.h"
+#include <linux/iio/trigger.h>
 
 /**
  * struct iio_sw_ring_buffer - software ring buffer
diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h
index 7556e2122367..a5857aa7aefa 100644
--- a/drivers/staging/iio/ring_sw.h
+++ b/drivers/staging/iio/ring_sw.h
@@ -23,7 +23,7 @@
 
 #ifndef _IIO_RING_SW_H_
 #define _IIO_RING_SW_H_
-#include "buffer.h"
+#include <linux/iio/buffer.h>
 
 struct iio_buffer *iio_sw_rb_allocate(struct iio_dev *indio_dev);
 void iio_sw_rb_free(struct iio_buffer *ring);
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 665653d79f02..f85734d212bb 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -15,8 +15,8 @@
 
 #include <asm/gptimers.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 struct bfin_timer {
 	unsigned short id, bit;
@@ -172,7 +172,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 	st->timer_num = ret;
 	st->t = &iio_bfin_timer_code[st->timer_num];
 
-	st->trig = iio_allocate_trigger("bfintmr%d", st->timer_num);
+	st->trig = iio_trigger_alloc("bfintmr%d", st->timer_num);
 	if (!st->trig) {
 		ret = -ENOMEM;
 		goto out1;
@@ -203,7 +203,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 out4:
 	iio_trigger_unregister(st->trig);
 out2:
-	iio_put_trigger(st->trig);
+	iio_trigger_put(st->trig);
 out1:
 	kfree(st);
 out:
@@ -217,7 +217,7 @@ static int __devexit iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 	disable_gptimers(st->t->bit);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_put_trigger(st->trig);
+	iio_trigger_put(st->trig);
 	kfree(st);
 
 	return 0;
diff --git a/drivers/staging/iio/trigger/iio-trig-gpio.c b/drivers/staging/iio/trigger/iio-trig-gpio.c
index a3465947235e..90b26846fc6b 100644
--- a/drivers/staging/iio/trigger/iio-trig-gpio.c
+++ b/drivers/staging/iio/trigger/iio-trig-gpio.c
@@ -22,8 +22,8 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 static LIST_HEAD(iio_gpio_trigger_list);
 static DEFINE_MUTEX(iio_gpio_trigger_list_lock);
@@ -72,7 +72,7 @@ static int iio_gpio_trigger_probe(struct platform_device *pdev)
 
 		for (irq = irq_res->start; irq <= irq_res->end; irq++) {
 
-			trig = iio_allocate_trigger("irqtrig%d", irq);
+			trig = iio_trigger_alloc("irqtrig%d", irq);
 			if (!trig) {
 				ret = -ENOMEM;
 				goto error_free_completed_registrations;
@@ -114,7 +114,7 @@ error_release_irq:
 error_free_trig_info:
 	kfree(trig_info);
 error_put_trigger:
-	iio_put_trigger(trig);
+	iio_trigger_put(trig);
 error_free_completed_registrations:
 	/* The rest should have been added to the iio_gpio_trigger_list */
 	list_for_each_entry_safe(trig,
@@ -144,7 +144,7 @@ static int iio_gpio_trigger_remove(struct platform_device *pdev)
 		iio_trigger_unregister(trig);
 		free_irq(trig_info->irq, trig);
 		kfree(trig_info);
-		iio_put_trigger(trig);
+		iio_trigger_put(trig);
 	}
 	mutex_unlock(&iio_gpio_trigger_list_lock);
 
diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index a80cf67bf84d..9f2d055524a3 100644
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/rtc.h>
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 static LIST_HEAD(iio_prtc_trigger_list);
 static DEFINE_MUTEX(iio_prtc_trigger_list_lock);
@@ -112,7 +112,7 @@ static int iio_trig_periodic_rtc_probe(struct platform_device *dev)
 	for (i = 0;; i++) {
 		if (pdata[i] == NULL)
 			break;
-		trig = iio_allocate_trigger("periodic%s", pdata[i]);
+		trig = iio_trigger_alloc("periodic%s", pdata[i]);
 		if (!trig) {
 			ret = -ENOMEM;
 			goto error_free_completed_registrations;
@@ -152,7 +152,7 @@ error_free_trig_info:
 	kfree(trig_info);
 error_put_trigger_and_remove_from_list:
 	list_del(&trig->alloc_list);
-	iio_put_trigger(trig);
+	iio_trigger_put(trig);
 error_free_completed_registrations:
 	list_for_each_entry_safe(trig,
 				 trig2,
diff --git a/drivers/staging/iio/trigger/iio-trig-sysfs.c b/drivers/staging/iio/trigger/iio-trig-sysfs.c
index 174dc65709d5..552763bb3d4c 100644
--- a/drivers/staging/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/staging/iio/trigger/iio-trig-sysfs.c
@@ -11,8 +11,8 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 struct iio_sysfs_trig {
 	struct iio_trigger *trig;
@@ -139,7 +139,7 @@ static int iio_sysfs_trigger_probe(int id)
 		goto out1;
 	}
 	t->id = id;
-	t->trig = iio_allocate_trigger("sysfstrig%d", id);
+	t->trig = iio_trigger_alloc("sysfstrig%d", id);
 	if (!t->trig) {
 		ret = -ENOMEM;
 		goto free_t;
@@ -158,7 +158,7 @@ static int iio_sysfs_trigger_probe(int id)
 	return 0;
 
 out2:
-	iio_put_trigger(t->trig);
+	iio_trigger_put(t->trig);
 free_t:
 	kfree(t);
 out1:
@@ -182,7 +182,7 @@ static int iio_sysfs_trigger_remove(int id)
 	}
 
 	iio_trigger_unregister(t->trig);
-	iio_free_trigger(t->trig);
+	iio_trigger_free(t->trig);
 
 	list_del(&t->l);
 	kfree(t);
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index e8023afd3656..4513f78f1127 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -92,15 +92,10 @@ const unsigned char line6_midi_id[] = {
 	Code to request version of POD, Variax interface
 	(and maybe other devices).
 */
-static const char line6_request_version0[] = {
+static const char line6_request_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
 };
 
-/*
-	Copy of version request code with GFP_KERNEL flag for use in URB.
-*/
-static const char *line6_request_version;
-
 struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
 
 /**
@@ -336,8 +331,21 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 */
 int line6_version_request_async(struct usb_line6 *line6)
 {
-	return line6_send_raw_message_async(line6, line6_request_version,
-					    sizeof(line6_request_version0));
+	char *buffer;
+	int retval;
+
+	buffer = kmalloc(sizeof(line6_request_version), GFP_ATOMIC);
+	if (buffer == NULL) {
+		dev_err(line6->ifcdev, "Out of memory");
+		return -ENOMEM;
+	}
+
+	memcpy(buffer, line6_request_version, sizeof(line6_request_version));
+
+	retval = line6_send_raw_message_async(line6, buffer,
+					      sizeof(line6_request_version));
+	kfree(buffer);
+	return retval;
 }
 
 /*
@@ -1292,69 +1300,7 @@ static struct usb_driver line6_driver = {
 	.id_table = line6_id_table,
 };
 
-/*
-	Module initialization.
-*/
-static int __init line6_init(void)
-{
-	int i, retval;
-
-	printk(KERN_INFO "%s driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
-
-	for (i = LINE6_MAX_DEVICES; i--;)
-		line6_devices[i] = NULL;
-
-	retval = usb_register(&line6_driver);
-
-	if (retval) {
-		err("usb_register failed. Error number %d", retval);
-		return retval;
-	}
-
-	line6_request_version = kmalloc(sizeof(line6_request_version0),
-					GFP_KERNEL);
-
-	if (line6_request_version == NULL) {
-		err("Out of memory");
-		return -ENOMEM;
-	}
-
-	memcpy((char *)line6_request_version, line6_request_version0,
-	       sizeof(line6_request_version0));
-
-	return retval;
-}
-
-/*
-	Module cleanup.
-*/
-static void __exit line6_exit(void)
-{
-	int i;
-	struct usb_line6 *line6;
-	struct snd_line6_pcm *line6pcm;
-
-	/* stop all PCM channels */
-	for (i = LINE6_MAX_DEVICES; i--;) {
-		line6 = line6_devices[i];
-
-		if (line6 == NULL)
-			continue;
-
-		line6pcm = line6->line6pcm;
-
-		if (line6pcm == NULL)
-			continue;
-
-		line6_pcm_release(line6pcm, ~0);
-	}
-
-	usb_deregister(&line6_driver);
-	kfree(line6_request_version);
-}
-
-module_init(line6_init);
-module_exit(line6_exit);
+module_usb_driver(line6_driver);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index b754f69a29c4..31b624b63425 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -168,7 +168,7 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
 			      cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
 
 	if (ret < 0) {
-		err("send failed (error %d)\n", ret);
+		dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c
index 5917657b9d0f..9ce8c9daa2e7 100644
--- a/drivers/staging/media/as102/as102_fe.c
+++ b/drivers/staging/media/as102/as102_fe.c
@@ -17,8 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/version.h>
-
 #include "as102_drv.h"
 #include "as10x_types.h"
 #include "as10x_cmd.h"
diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c
index 1075fb1df0d9..b9670ee41b4e 100644
--- a/drivers/staging/media/as102/as102_fw.c
+++ b/drivers/staging/media/as102/as102_fw.c
@@ -230,11 +230,8 @@ int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap)
 	pr_info("%s: firmware: %s loaded with success\n",
 		DRIVER_NAME, fw2);
 error:
-	/* free data buffer */
 	kfree(cmd_buf);
-	/* release firmware if needed */
-	if (firmware != NULL)
-		release_firmware(firmware);
+	release_firmware(firmware);
 
 	LEAVE();
 	return errno;
diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c
index 0f6bfe7eccba..36150e5c62de 100644
--- a/drivers/staging/media/as102/as102_usb_drv.c
+++ b/drivers/staging/media/as102/as102_usb_drv.c
@@ -367,7 +367,7 @@ static int as102_usb_probe(struct usb_interface *intf,
 	ENTER();
 
 	/* This should never actually happen */
-	if ((sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)) !=
+	if (ARRAY_SIZE(as102_usb_id_table) !=
 	    (sizeof(as102_device_names) / sizeof(const char *))) {
 		pr_err("Device names table invalid size");
 		return -EINVAL;
@@ -380,8 +380,7 @@ static int as102_usb_probe(struct usb_interface *intf,
 	}
 
 	/* Assign the user-friendly device name */
-	for (i = 0; i < (sizeof(as102_usb_id_table) /
-			 sizeof(struct usb_device_id)); i++) {
+	for (i = 0; i < ARRAY_SIZE(as102_usb_id_table); i++) {
 		if (id == &as102_usb_id_table[i]) {
 			as102_dev->name = as102_device_names[i];
 			as102_dev->elna_cfg = as102_elna_cfg[i];
diff --git a/drivers/staging/media/as102/as102_usb_drv.h b/drivers/staging/media/as102/as102_usb_drv.h
index fc2884ab02a2..1ad1ec52b11e 100644
--- a/drivers/staging/media/as102/as102_usb_drv.h
+++ b/drivers/staging/media/as102/as102_usb_drv.h
@@ -17,8 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/version.h>
-
 #ifndef _AS102_USB_DRV_H_
 #define _AS102_USB_DRV_H_
 
diff --git a/drivers/staging/media/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c
index 9413b37490c2..3cee3cd986d2 100644
--- a/drivers/staging/media/easycap/easycap_ioctl.c
+++ b/drivers/staging/media/easycap/easycap_ioctl.c
@@ -26,6 +26,7 @@
 /*****************************************************************************/
 
 #include "easycap.h"
+#include <linux/version.h>
 
 /*--------------------------------------------------------------------------*/
 /*
diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c
index d0fe34afc2e5..6f83d362ab0d 100644
--- a/drivers/staging/media/easycap/easycap_main.c
+++ b/drivers/staging/media/easycap/easycap_main.c
@@ -3578,7 +3578,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 
 		if (0 != (video_register_device(&(peasycap->video_device),
 							VFL_TYPE_GRABBER, -1))) {
-			err("Not able to register with videodev");
+			dev_err(&intf->dev,
+				"Not able to register with videodev\n");
 			videodev_release(&(peasycap->video_device));
 			return -ENODEV;
 		}
@@ -3822,7 +3823,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 
 		rc = easycap_alsa_probe(peasycap);
 		if (rc) {
-			err("easycap_alsa_probe() rc = %i\n", rc);
+			dev_err(&intf->dev, "easycap_alsa_probe() rc = %i\n",
+				rc);
 			return -ENODEV;
 		}
 
diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README
index 48f447637817..aeba1324a9c5 100644
--- a/drivers/staging/media/go7007/README
+++ b/drivers/staging/media/go7007/README
@@ -6,6 +6,6 @@ Todo:
 	- testing?
 	- handle churn in v4l layer.
 
-Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross
+Please send patches to Greg Kroah-Hartman <greg@linuxfoundation.org> and Cc: Ross
 Cohen <rcohen@snurgle.org> as well.
 
diff --git a/drivers/staging/media/go7007/s2250-loader.c b/drivers/staging/media/go7007/s2250-loader.c
index 4e132519e253..7c5af4f289b6 100644
--- a/drivers/staging/media/go7007/s2250-loader.c
+++ b/drivers/staging/media/go7007/s2250-loader.c
@@ -160,31 +160,7 @@ static struct usb_driver s2250loader_driver = {
 	.id_table	= s2250loader_ids,
 };
 
-static int __init s2250loader_init(void)
-{
-	int r;
-	unsigned i = 0;
-
-	for (i = 0; i < MAX_DEVICES; i++)
-		s2250_dev_table[i] = NULL;
-
-	r = usb_register(&s2250loader_driver);
-	if (r) {
-		printk(KERN_ERR "usb_register failed. Error number %d\n", r);
-		return -1;
-	}
-
-	printk(KERN_INFO "s2250loader_init: driver registered\n");
-	return 0;
-}
-module_init(s2250loader_init);
-
-static void __exit s2250loader_cleanup(void)
-{
-	printk(KERN_INFO "s2250loader_cleanup\n");
-	usb_deregister(&s2250loader_driver);
-}
-module_exit(s2250loader_cleanup);
+module_usb_driver(s2250loader_driver);
 
 MODULE_AUTHOR("");
 MODULE_DESCRIPTION("firmware loader for Sensoray 2250/2251");
diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
index 5f7f8cd3a661..d7cf5ef076a5 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -209,8 +209,9 @@ static void deregister_from_lirc(struct imon_context *context)
 
 	retval = lirc_unregister_driver(minor);
 	if (retval)
-		err("%s: unable to deregister from lirc(%d)",
-			__func__, retval);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: unable to deregister from lirc(%d)",
+		       __func__, retval);
 	else
 		printk(KERN_INFO MOD_NAME ": Deregistered iMON driver "
 		       "(minor:%d)\n", minor);
@@ -234,16 +235,18 @@ static int display_open(struct inode *inode, struct file *file)
 	subminor = iminor(inode);
 	interface = usb_find_interface(&imon_driver, subminor);
 	if (!interface) {
-		err("%s: could not find interface for minor %d",
-		    __func__, subminor);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: could not find interface for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
 	context = usb_get_intfdata(interface);
 
 	if (!context) {
-		err("%s: no context found for minor %d",
-					__func__, subminor);
+		dev_err(&interface->dev,
+			"%s: no context found for minor %d\n",
+			__func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -251,10 +254,12 @@ static int display_open(struct inode *inode, struct file *file)
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->display) {
-		err("%s: display not supported by device", __func__);
+		dev_err(&interface->dev,
+			"%s: display not supported by device\n", __func__);
 		retval = -ENODEV;
 	} else if (context->display_isopen) {
-		err("%s: display port is already open", __func__);
+		dev_err(&interface->dev,
+			"%s: display port is already open\n", __func__);
 		retval = -EBUSY;
 	} else {
 		context->display_isopen = 1;
@@ -281,17 +286,20 @@ static int display_close(struct inode *inode, struct file *file)
 	context = file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->display) {
-		err("%s: display not supported by device", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: display not supported by device\n", __func__);
 		retval = -ENODEV;
 	} else if (!context->display_isopen) {
-		err("%s: display is not open", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: display is not open\n", __func__);
 		retval = -EIO;
 	} else {
 		context->display_isopen = 0;
@@ -340,19 +348,23 @@ static int send_packet(struct imon_context *context)
 	retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
 	if (retval) {
 		atomic_set(&(context->tx.busy), 0);
-		err("%s: error submitting urb(%d)", __func__, retval);
+		dev_err(&context->usbdev->dev,
+			"%s: error submitting urb(%d)\n", __func__, retval);
 	} else {
 		/* Wait for transmission to complete (or abort) */
 		mutex_unlock(&context->ctx_lock);
 		retval = wait_for_completion_interruptible(
 				&context->tx.finished);
 		if (retval)
-			err("%s: task interrupted", __func__);
+			dev_err(&context->usbdev->dev,
+				"%s: task interrupted\n", __func__);
 		mutex_lock(&context->ctx_lock);
 
 		retval = context->tx.status;
 		if (retval)
-			err("%s: packet tx failed (%d)", __func__, retval);
+			dev_err(&context->usbdev->dev,
+				"%s: packet tx failed (%d)\n",
+				__func__, retval);
 	}
 
 	return retval;
@@ -383,20 +395,23 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 
 	context = file->private_data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->dev_present) {
-		err("%s: no iMON device present", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: no iMON device present\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) {
-		err("%s: invalid payload size", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: invalid payload size\n", __func__);
 		retval = -EINVAL;
 		goto exit;
 	}
@@ -425,8 +440,9 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 
 		retval = send_packet(context);
 		if (retval) {
-			err("%s: send packet failed for packet #%d",
-					__func__, seq/2);
+			dev_err(&context->usbdev->dev,
+				"%s: send packet failed for packet #%d\n",
+				__func__, seq/2);
 			goto exit;
 		} else {
 			seq += 2;
@@ -441,7 +457,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 		context->usb_tx_buf[7] = (unsigned char) seq;
 		retval = send_packet(context);
 		if (retval)
-			err("%s: send packet failed for packet #%d",
+			dev_err(&context->usbdev->dev,
+				"%s: send packet failed for packet #%d\n",
 					__func__, seq/2);
 	}
 
@@ -508,7 +525,8 @@ static void ir_close(void *data)
 
 	context = (struct imon_context *)data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return;
 	}
 
@@ -732,7 +750,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	context = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
 	if (!context) {
-		err("%s: kzalloc failed for context", __func__);
+		dev_err(dev, "%s: kzalloc failed for context\n", __func__);
 		alloc_status = 1;
 		goto alloc_status_switch;
 	}
@@ -797,7 +815,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	/* Input endpoint is mandatory */
 	if (!ir_ep_found) {
-		err("%s: no valid input (IR) endpoint found.", __func__);
+		dev_err(dev, "%s: no valid input (IR) endpoint found.\n", __func__);
 		retval = -ENODEV;
 		alloc_status = 2;
 		goto alloc_status_switch;
@@ -814,30 +832,30 @@ static int imon_probe(struct usb_interface *interface,
 
 	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
 	if (!driver) {
-		err("%s: kzalloc failed for lirc_driver", __func__);
+		dev_err(dev, "%s: kzalloc failed for lirc_driver\n", __func__);
 		alloc_status = 2;
 		goto alloc_status_switch;
 	}
 	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
 	if (!rbuf) {
-		err("%s: kmalloc failed for lirc_buffer", __func__);
+		dev_err(dev, "%s: kmalloc failed for lirc_buffer\n", __func__);
 		alloc_status = 3;
 		goto alloc_status_switch;
 	}
 	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
-		err("%s: lirc_buffer_init failed", __func__);
+		dev_err(dev, "%s: lirc_buffer_init failed\n", __func__);
 		alloc_status = 4;
 		goto alloc_status_switch;
 	}
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!rx_urb) {
-		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		dev_err(dev, "%s: usb_alloc_urb failed for IR urb\n", __func__);
 		alloc_status = 5;
 		goto alloc_status_switch;
 	}
 	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!tx_urb) {
-		err("%s: usb_alloc_urb failed for display urb",
+		dev_err(dev, "%s: usb_alloc_urb failed for display urb\n",
 		    __func__);
 		alloc_status = 6;
 		goto alloc_status_switch;
@@ -865,7 +883,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	lirc_minor = lirc_register_driver(driver);
 	if (lirc_minor < 0) {
-		err("%s: lirc_register_driver failed", __func__);
+		dev_err(dev, "%s: lirc_register_driver failed\n", __func__);
 		alloc_status = 7;
 		goto unlock;
 	} else
@@ -900,8 +918,8 @@ static int imon_probe(struct usb_interface *interface,
 	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
 
 	if (retval) {
-		err("%s: usb_submit_urb failed for intf0 (%d)",
-		    __func__, retval);
+		dev_err(dev, "%s: usb_submit_urb failed for intf0 (%d)\n",
+			__func__, retval);
 		mutex_unlock(&context->ctx_lock);
 		goto exit;
 	}
diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c
index 74421043b954..352a20229ca2 100644
--- a/drivers/staging/media/lirc/lirc_sasem.c
+++ b/drivers/staging/media/lirc/lirc_sasem.c
@@ -185,7 +185,7 @@ static void deregister_from_lirc(struct sasem_context *context)
 
 	retval = lirc_unregister_driver(minor);
 	if (retval)
-		err("%s: unable to deregister from lirc (%d)",
+		printk(KERN_ERR "%s: unable to deregister from lirc (%d)\n",
 			__func__, retval);
 	else
 		printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n",
@@ -210,16 +210,18 @@ static int vfd_open(struct inode *inode, struct file *file)
 	subminor = iminor(inode);
 	interface = usb_find_interface(&sasem_driver, subminor);
 	if (!interface) {
-		err("%s: could not find interface for minor %d",
-		    __func__, subminor);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: could not find interface for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
 	context = usb_get_intfdata(interface);
 
 	if (!context) {
-		err("%s: no context found for minor %d",
-					__func__, subminor);
+		dev_err(&interface->dev,
+			"%s: no context found for minor %d\n",
+			__func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -227,12 +229,13 @@ static int vfd_open(struct inode *inode, struct file *file)
 	mutex_lock(&context->ctx_lock);
 
 	if (context->vfd_isopen) {
-		err("%s: VFD port is already open", __func__);
+		dev_err(&interface->dev,
+			"%s: VFD port is already open", __func__);
 		retval = -EBUSY;
 	} else {
 		context->vfd_isopen = 1;
 		file->private_data = context;
-		printk(KERN_INFO "VFD port opened\n");
+		dev_info(&interface->dev, "VFD port opened\n");
 	}
 
 	mutex_unlock(&context->ctx_lock);
@@ -253,7 +256,8 @@ static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	context = (struct sasem_context *) file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
@@ -287,14 +291,15 @@ static int vfd_close(struct inode *inode, struct file *file)
 	context = (struct sasem_context *) file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->vfd_isopen) {
-		err("%s: VFD is not open", __func__);
+		dev_err(&context->dev->dev, "%s: VFD is not open\n", __func__);
 		retval = -EIO;
 	} else {
 		context->vfd_isopen = 0;
@@ -339,7 +344,8 @@ static int send_packet(struct sasem_context *context)
 	retval =  usb_submit_urb(context->tx_urb, GFP_KERNEL);
 	if (retval) {
 		atomic_set(&(context->tx.busy), 0);
-		err("%s: error submitting urb (%d)", __func__, retval);
+		dev_err(&context->dev->dev, "%s: error submitting urb (%d)\n",
+			__func__, retval);
 	} else {
 		/* Wait for transmission to complete (or abort) */
 		mutex_unlock(&context->ctx_lock);
@@ -348,7 +354,9 @@ static int send_packet(struct sasem_context *context)
 
 		retval = context->tx.status;
 		if (retval)
-			err("%s: packet tx failed (%d)", __func__, retval);
+			dev_err(&context->dev->dev,
+				"%s: packet tx failed (%d)\n",
+				__func__, retval);
 	}
 
 	return retval;
@@ -369,20 +377,23 @@ static ssize_t vfd_write(struct file *file, const char *buf,
 
 	context = (struct sasem_context *) file->private_data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->dev_present) {
-		err("%s: no Sasem device present", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no Sasem device present\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) {
-		err("%s: invalid payload size", __func__);
+		dev_err(&context->dev->dev, "%s: invalid payload size\n",
+			__func__);
 		retval = -EINVAL;
 		goto exit;
 	}
@@ -440,9 +451,9 @@ static ssize_t vfd_write(struct file *file, const char *buf,
 		}
 		retval = send_packet(context);
 		if (retval) {
-
-			err("%s: send packet failed for packet #%d",
-					__func__, i);
+			dev_err(&context->dev->dev,
+				"%s: send packet failed for packet #%d\n",
+				__func__, i);
 			goto exit;
 		}
 	}
@@ -492,7 +503,8 @@ static int ir_open(void *data)
 	mutex_lock(&context->ctx_lock);
 
 	if (context->ir_isopen) {
-		err("%s: IR port is already open", __func__);
+		dev_err(&context->dev->dev, "%s: IR port is already open\n",
+			__func__);
 		retval = -EBUSY;
 		goto exit;
 	}
@@ -506,8 +518,9 @@ static int ir_open(void *data)
 	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
 
 	if (retval)
-		err("%s: usb_submit_urb failed for ir_open (%d)",
-		    __func__, retval);
+		dev_err(&context->dev->dev,
+			"%s: usb_submit_urb failed for ir_open (%d)\n",
+			__func__, retval);
 	else {
 		context->ir_isopen = 1;
 		printk(KERN_INFO "IR port opened\n");
@@ -529,7 +542,8 @@ static void ir_close(void *data)
 
 	context = (struct sasem_context *)data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return;
 	}
 
@@ -687,7 +701,7 @@ static int sasem_probe(struct usb_interface *interface,
 	struct sasem_context *context = NULL;
 	int i;
 
-	printk(KERN_INFO "%s: found Sasem device\n", __func__);
+	dev_info(&interface->dev, "%s: found Sasem device\n", __func__);
 
 
 	dev = usb_get_dev(interface_to_usbdev(interface));
@@ -719,8 +733,8 @@ static int sasem_probe(struct usb_interface *interface,
 			rx_endpoint = ep;
 			ir_ep_found = 1;
 			if (debug)
-				printk(KERN_INFO "%s: found IR endpoint\n",
-				       __func__);
+				dev_info(&interface->dev,
+					"%s: found IR endpoint\n", __func__);
 
 		} else if (!vfd_ep_found &&
 			ep_dir == USB_DIR_OUT &&
@@ -729,22 +743,23 @@ static int sasem_probe(struct usb_interface *interface,
 			tx_endpoint = ep;
 			vfd_ep_found = 1;
 			if (debug)
-				printk(KERN_INFO "%s: found VFD endpoint\n",
-				       __func__);
+				dev_info(&interface->dev,
+					"%s: found VFD endpoint\n", __func__);
 		}
 	}
 
 	/* Input endpoint is mandatory */
 	if (!ir_ep_found) {
-
-		err("%s: no valid input (IR) endpoint found.", __func__);
+		dev_err(&interface->dev,
+			"%s: no valid input (IR) endpoint found.\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (!vfd_ep_found)
-		printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n",
-		       __func__);
+		dev_info(&interface->dev,
+			"%s: no valid output (VFD) endpoint found.\n",
+			__func__);
 
 
 	/* Allocate memory */
@@ -752,38 +767,44 @@ static int sasem_probe(struct usb_interface *interface,
 
 	context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL);
 	if (!context) {
-		err("%s: kzalloc failed for context", __func__);
+		dev_err(&interface->dev,
+			"%s: kzalloc failed for context\n", __func__);
 		alloc_status = 1;
 		goto alloc_status_switch;
 	}
 	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
 	if (!driver) {
-		err("%s: kzalloc failed for lirc_driver", __func__);
+		dev_err(&interface->dev,
+			"%s: kzalloc failed for lirc_driver\n", __func__);
 		alloc_status = 2;
 		goto alloc_status_switch;
 	}
 	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
 	if (!rbuf) {
-		err("%s: kmalloc failed for lirc_buffer", __func__);
+		dev_err(&interface->dev,
+			"%s: kmalloc failed for lirc_buffer\n", __func__);
 		alloc_status = 3;
 		goto alloc_status_switch;
 	}
 	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
-		err("%s: lirc_buffer_init failed", __func__);
+		dev_err(&interface->dev,
+			"%s: lirc_buffer_init failed\n", __func__);
 		alloc_status = 4;
 		goto alloc_status_switch;
 	}
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!rx_urb) {
-		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		dev_err(&interface->dev,
+			"%s: usb_alloc_urb failed for IR urb\n", __func__);
 		alloc_status = 5;
 		goto alloc_status_switch;
 	}
 	if (vfd_ep_found) {
 		tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!tx_urb) {
-			err("%s: usb_alloc_urb failed for VFD urb",
-			    __func__);
+			dev_err(&interface->dev,
+				"%s: usb_alloc_urb failed for VFD urb",
+				__func__);
 			alloc_status = 6;
 			goto alloc_status_switch;
 		}
@@ -807,7 +828,8 @@ static int sasem_probe(struct usb_interface *interface,
 
 	lirc_minor = lirc_register_driver(driver);
 	if (lirc_minor < 0) {
-		err("%s: lirc_register_driver failed", __func__);
+		dev_err(&interface->dev,
+			"%s: lirc_register_driver failed\n", __func__);
 		alloc_status = 7;
 		retval = lirc_minor;
 		goto unlock;
diff --git a/drivers/staging/media/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c
index 7950887ff113..3bb865c02173 100644
--- a/drivers/staging/media/lirc/lirc_ttusbir.c
+++ b/drivers/staging/media/lirc/lirc_ttusbir.c
@@ -113,8 +113,9 @@ static int set_use_inc(void *data)
 	for (i = 0; i < num_urbs; i++) {
 		retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL);
 		if (retval) {
-			err("%s: usb_submit_urb failed on urb %d",
-			    __func__, i);
+			dev_err(&ttusbir->interf->dev,
+				"%s: usb_submit_urb failed on urb %d\n",
+				__func__, i);
 			return retval;
 		}
 	}
@@ -278,7 +279,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (ttusbir->alt_setting != -1)
 		DPRINTK("alt setting: %d\n", ttusbir->alt_setting);
 	else {
-		err("Could not find alternate setting\n");
+		dev_err(&intf->dev, "Could not find alternate setting\n");
 		kfree(ttusbir);
 		return -EINVAL;
 	}
@@ -291,7 +292,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	/* Register as a LIRC driver */
 	if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) {
-		err("Could not get memory for LIRC data buffer\n");
+		dev_err(&intf->dev, "Could not get memory for LIRC data buffer\n");
 		usb_set_intfdata(intf, NULL);
 		kfree(ttusbir);
 		return -ENOMEM;
@@ -310,7 +311,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	ttusbir->driver.features = LIRC_CAN_REC_MODE2;
 	ttusbir->minor = lirc_register_driver(&ttusbir->driver);
 	if (ttusbir->minor < 0) {
-		err("Error registering as LIRC driver\n");
+		dev_err(&intf->dev, "Error registering as LIRC driver\n");
 		usb_set_intfdata(intf, NULL);
 		lirc_buffer_free(&ttusbir->rbuf);
 		kfree(ttusbir);
@@ -321,7 +322,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	for (i = 0; i < num_urbs; i++) {
 		ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL);
 		if (!ttusbir->urb[i]) {
-			err("Could not allocate memory for the URB\n");
+			dev_err(&intf->dev, "Could not allocate memory for the URB\n");
 			for (j = i - 1; j >= 0; j--)
 				kfree(ttusbir->urb[j]);
 			lirc_buffer_free(&ttusbir->rbuf);
diff --git a/drivers/staging/net/Kconfig b/drivers/staging/net/Kconfig
new file mode 100644
index 000000000000..a64e56b1898a
--- /dev/null
+++ b/drivers/staging/net/Kconfig
@@ -0,0 +1,38 @@
+if NETDEVICES
+
+if WAN
+
+config PC300
+	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
+	depends on HDLC && PCI && BROKEN
+	---help---
+	  This driver is broken because of struct tty_driver change.
+
+	  Driver for the Cyclades-PC300 synchronous communication boards.
+
+	  These boards provide synchronous serial interfaces to your
+	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
+	  T1/E1). If you wish to support Multilink PPP, please select the
+	  option later and read the file README.mlppp provided by PC300
+	  package.
+
+	  To compile this as a module, choose M here: the module
+	  will be called pc300.
+
+	  If unsure, say N.
+
+config PC300_MLPPP
+	bool "Cyclades-PC300 MLPPP support"
+	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
+	help
+	  Multilink PPP over the PC300 synchronous communication boards.
+
+comment "Cyclades-PC300 MLPPP support is disabled."
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+
+comment "Refer to the file README.mlppp, provided by PC300 package."
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+
+endif # WAN
+
+endif # NETDEVICES
diff --git a/drivers/staging/net/Makefile b/drivers/staging/net/Makefile
new file mode 100644
index 000000000000..0799c43d5114
--- /dev/null
+++ b/drivers/staging/net/Makefile
@@ -0,0 +1,5 @@
+pc300-y				:= pc300_drv.o
+pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
+pc300-objs			:= $(pc300-y)
+
+obj-$(CONFIG_PC300)		+= pc300.o
diff --git a/drivers/staging/net/TODO b/drivers/staging/net/TODO
new file mode 100644
index 000000000000..e3446f2ad7c7
--- /dev/null
+++ b/drivers/staging/net/TODO
@@ -0,0 +1,5 @@
+PC300
+The driver is very broken and cannot work with the current TTY layer. It is
+inevitable to convert it to the new TTY API.
+
+If no one steps in to adopt the driver, it will be removed in the 3.7 release.
diff --git a/drivers/net/wan/pc300-falc-lh.h b/drivers/staging/net/pc300-falc-lh.h
index 01ed23ca76c7..01ed23ca76c7 100644
--- a/drivers/net/wan/pc300-falc-lh.h
+++ b/drivers/staging/net/pc300-falc-lh.h
diff --git a/drivers/net/wan/pc300.h b/drivers/staging/net/pc300.h
index 2e4f84f6cad4..2e4f84f6cad4 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/staging/net/pc300.h
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/staging/net/pc300_drv.c
index cb0f8d932b0c..cb0f8d932b0c 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/staging/net/pc300_drv.c
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/staging/net/pc300_tty.c
index 4709f4228561..4709f4228561 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/staging/net/pc300_tty.c
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index a4c17b0e10cf..ba6ed8f4e8a3 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -42,7 +42,7 @@
  * enum nvec_event_size - The size of an event message
  * @NVEC_2BYTES: The message has one command byte and one data byte
  * @NVEC_3BYTES: The message has one command byte and two data bytes
- * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and as
+ * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and has
  *                 up to as many bytes as the number in the count byte. The
  *                 maximum is 32
  *
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index d91751f9ffe8..34afc16bc493 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -163,7 +163,7 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 		/*
 		 * We received a packet with either an alignment error
 		 * or a FCS error. This may be signalling that we are
-		 * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK}
+		 * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK]
 		 * off. If this is the case we need to parse the
 		 * packet to determine if we can remove a non spec
 		 * preamble and generate a correct packet.
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 91a97b3e45c6..2d4fcea892f7 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -62,7 +62,7 @@
  * You can define GET_SKBUFF_QOS() to override how the skbuff output
  * function determines which output queue is used. The default
  * implementation always uses the base queue for the port. If, for
- * example, you wanted to use the skb->priority fieid, define
+ * example, you wanted to use the skb->priority field, define
  * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)
  */
 #ifndef GET_SKBUFF_QOS
@@ -165,8 +165,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	/*
-	 * Prefetch the private data structure.  It is larger that one
-	 * cache line.
+	 * Prefetch the private data structure.  It is larger than the
+	 * one cache line.
 	 */
 	prefetch(priv);
 
@@ -291,8 +291,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * See if we can put this skb in the FPA pool. Any strange
 	 * behavior from the Linux networking stack will most likely
 	 * be caused by a bug in the following code. If some field is
-	 * in use by the network stack and get carried over when a
-	 * buffer is reused, bad thing may happen.  If in doubt and
+	 * in use by the network stack and gets carried over when a
+	 * buffer is reused, bad things may happen.  If in doubt and
 	 * you dont need the absolute best performance, disable the
 	 * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has
 	 * shown a 25% increase in performance under some loads.
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 144fb99bf50c..2da5ce17ead0 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -38,7 +38,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
 }
 
 /**
- * INTERFACE - convert IPD port to locgical interface
+ * INTERFACE - convert IPD port to logical interface
  * @ipd_port: Port to check
  *
  * Returns Logical interface
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 60cba8194de3..18f7a790f73d 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -357,7 +357,7 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev)
 			/* Force accept multicast packets */
 			control.s.mcst = 2;
 		else
-			/* Force reject multicat packets */
+			/* Force reject multicast packets */
 			control.s.mcst = 1;
 
 		if (dev->flags & IFF_PROMISC)
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 3d9199320d86..992275c0d87c 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -71,8 +71,8 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init)
 
 	ver = dcon_read(dcon, DCON_REG_ID);
 	if ((ver >> 8) != 0xDC) {
-		printk(KERN_ERR "olpc-dcon:  DCON ID not 0xDCxx: 0x%04x "
-				"instead.\n", ver);
+		printk(KERN_ERR "olpc-dcon:  DCON ID not 0xDCxx: 0x%04x instead.\n",
+			ver);
 		rc = -ENXIO;
 		goto err;
 	}
@@ -134,10 +134,10 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down)
 power_up:
 	if (is_powered_down) {
 		x = 1;
-		x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		if (x) {
-			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
-					"to power up: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to force dcon to power up: %d!\n",
+				x);
 			return x;
 		}
 		msleep(10); /* we'll be conservative */
@@ -150,11 +150,10 @@ power_up:
 		x = dcon_read(dcon, DCON_REG_ID);
 	}
 	if (x < 0) {
-		printk(KERN_ERR "olpc-dcon:  unable to stabilize dcon's "
-				"smbus, reasserting power and praying.\n");
+		printk(KERN_ERR "olpc-dcon:  unable to stabilize dcon's smbus, reasserting power and praying.\n");
 		BUG_ON(olpc_board_at_least(olpc_board(0xc2)));
 		x = 0;
-		olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		msleep(100);
 		is_powered_down = 1;
 		goto power_up;	/* argh, stupid hardware.. */
@@ -220,10 +219,10 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep)
 
 	if (sleep) {
 		x = 0;
-		x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		if (x)
-			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
-					"to power down: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to force dcon to power down: %d!\n",
+				x);
 		else
 			dcon->asleep = sleep;
 	} else {
@@ -232,8 +231,8 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep)
 			dcon->disp_mode |= MODE_BL_ENABLE;
 		x = dcon_bus_stabilize(dcon, 1);
 		if (x)
-			printk(KERN_WARNING "olpc-dcon:  unable to reinit dcon"
-					" hardware: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to reinit dcon hardware: %d!\n",
+				x);
 		else
 			dcon->asleep = sleep;
 
@@ -304,7 +303,7 @@ static void dcon_source_switch(struct work_struct *work)
 
 	switch (source) {
 	case DCON_SOURCE_CPU:
-		printk("dcon_source_switch to CPU\n");
+		printk(KERN_INFO "dcon_source_switch to CPU\n");
 		/* Enable the scanline interrupt bit */
 		if (dcon_write(dcon, DCON_REG_MODE,
 				dcon->disp_mode | MODE_SCAN_INT))
@@ -599,7 +598,7 @@ static int dcon_fb_notifier(struct notifier_block *self,
 	struct fb_event *evdata = data;
 	struct dcon_priv *dcon = container_of(self, struct dcon_priv,
 			fbevent_nb);
-	int *blank = (int *) evdata->data;
+	int *blank = (int *)evdata->data;
 	if (((event != FB_EVENT_BLANK) && (event != FB_EVENT_CONBLANK)) ||
 			dcon->ignore_fb_events)
 		return 0;
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index cb6ce0cf92a0..c87fdfac4855 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -116,7 +116,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
 	cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);
 	cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS);
 
-	/* FIXME:  Clear the posiitive status as well, just to be sure */
+	/* FIXME:  Clear the positive status as well, just to be sure */
 	cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS);
 	cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS);
 
diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile
index d9cdc120d122..1ca0e0016de4 100644
--- a/drivers/staging/omapdrm/Makefile
+++ b/drivers/staging/omapdrm/Makefile
@@ -13,6 +13,7 @@ omapdrm-y := omap_drv.o \
 	omap_fb.o \
 	omap_fbdev.o \
 	omap_gem.o \
+	omap_gem_dmabuf.o \
 	omap_dmm_tiler.o \
 	tcm-sita.o
 
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c
index 1ecb6a73d790..9d83060e753a 100644
--- a/drivers/staging/omapdrm/omap_dmm_tiler.c
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.c
@@ -347,7 +347,7 @@ struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
 	ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area);
 	if (ret) {
 		kfree(block);
-		return 0;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	/* add to allocation list */
@@ -371,7 +371,7 @@ struct tiler_block *tiler_reserve_1d(size_t size)
 	if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
 				&block->area)) {
 		kfree(block);
-		return 0;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	spin_lock(&omap_dmm->list_lock);
diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c
index 620b8d54223d..1f559f445a30 100644
--- a/drivers/staging/omapdrm/omap_drv.c
+++ b/drivers/staging/omapdrm/omap_drv.c
@@ -746,7 +746,7 @@ static const struct file_operations omapdriver_fops = {
 
 static struct drm_driver omap_drm_driver = {
 		.driver_features =
-				DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM,
+				DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME,
 		.load = dev_load,
 		.unload = dev_unload,
 		.open = dev_open,
@@ -766,6 +766,8 @@ static struct drm_driver omap_drm_driver = {
 		.debugfs_init = omap_debugfs_init,
 		.debugfs_cleanup = omap_debugfs_cleanup,
 #endif
+		.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+		.gem_prime_export = omap_gem_prime_export,
 		.gem_init_object = omap_gem_init_object,
 		.gem_free_object = omap_gem_free_object,
 		.gem_vm_ops = &omap_gem_vm_ops,
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
index b7e0f0773003..3586173590c8 100644
--- a/drivers/staging/omapdrm/omap_drv.h
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -148,9 +148,16 @@ int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll);
 int omap_gem_get_paddr(struct drm_gem_object *obj,
 		dma_addr_t *paddr, bool remap);
 int omap_gem_put_paddr(struct drm_gem_object *obj);
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages,
+		bool remap);
+int omap_gem_put_pages(struct drm_gem_object *obj);
+uint32_t omap_gem_flags(struct drm_gem_object *obj);
 uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj);
 size_t omap_gem_mmap_size(struct drm_gem_object *obj);
 
+struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+		struct drm_gem_object *obj, int flags);
+
 static inline int align_pitch(int pitch, int width, int bpp)
 {
 	int bytespp = (bpp + 7) / 8;
diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c
index 04b235b6724a..0c53a3c313ff 100644
--- a/drivers/staging/omapdrm/omap_fb.c
+++ b/drivers/staging/omapdrm/omap_fb.c
@@ -167,7 +167,7 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
 }
 
 /* Call for unpin 'a' (if not NULL), and pin 'b' (if not NULL).  Although
- * buffers to unpin are just just pushed to the unpin fifo so that the
+ * buffers to unpin are just pushed to the unpin fifo so that the
  * caller can defer unpin until vblank.
  *
  * Note if this fails (ie. something went very wrong!), all buffers are
diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c
index 921f058cc6a4..c5ba334ac6bf 100644
--- a/drivers/staging/omapdrm/omap_gem.c
+++ b/drivers/staging/omapdrm/omap_gem.c
@@ -266,6 +266,12 @@ static void omap_gem_detach_pages(struct drm_gem_object *obj)
 	omap_obj->pages = NULL;
 }
 
+/* get buffer flags */
+uint32_t omap_gem_flags(struct drm_gem_object *obj)
+{
+	return to_omap_bo(obj)->flags;
+}
+
 /** get mmap offset */
 static uint64_t mmap_offset(struct drm_gem_object *obj)
 {
@@ -764,9 +770,27 @@ static int get_pages(struct drm_gem_object *obj, struct page ***pages)
 	return 0;
 }
 
-int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages)
+/* if !remap, and we don't have pages backing, then fail, rather than
+ * increasing the pin count (which we don't really do yet anyways,
+ * because we don't support swapping pages back out).  And 'remap'
+ * might not be quite the right name, but I wanted to keep it working
+ * similarly to omap_gem_get_paddr().  Note though that mutex is not
+ * aquired if !remap (because this can be called in atomic ctxt),
+ * but probably omap_gem_get_paddr() should be changed to work in the
+ * same way.  If !remap, a matching omap_gem_put_pages() call is not
+ * required (and should not be made).
+ */
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages,
+		bool remap)
 {
 	int ret;
+	if (!remap) {
+		struct omap_gem_object *omap_obj = to_omap_bo(obj);
+		if (!omap_obj->pages)
+			return -ENOMEM;
+		*pages = omap_obj->pages;
+		return 0;
+	}
 	mutex_lock(&obj->dev->struct_mutex);
 	ret = get_pages(obj, pages);
 	mutex_unlock(&obj->dev->struct_mutex);
diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c
new file mode 100644
index 000000000000..2fa39e8496db
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/staging/omapdrm/omap_gem_dmabuf.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include <linux/dma-buf.h>
+
+static struct sg_table *omap_gem_map_dma_buf(
+		struct dma_buf_attachment *attachment,
+		enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = attachment->dmabuf->priv;
+	struct sg_table *sg;
+	dma_addr_t paddr;
+	int ret;
+
+	sg = kzalloc(sizeof(*sg), GFP_KERNEL);
+	if (!sg)
+		return ERR_PTR(-ENOMEM);
+
+	/* camera, etc, need physically contiguous.. but we need a
+	 * better way to know this..
+	 */
+	ret = omap_gem_get_paddr(obj, &paddr, true);
+	if (ret)
+		goto out;
+
+	ret = sg_alloc_table(sg, 1, GFP_KERNEL);
+	if (ret)
+		goto out;
+
+	sg_init_table(sg->sgl, 1);
+	sg_dma_len(sg->sgl) = obj->size;
+	sg_set_page(sg->sgl, pfn_to_page(PFN_DOWN(paddr)), obj->size, 0);
+	sg_dma_address(sg->sgl) = paddr;
+
+out:
+	if (ret)
+		return ERR_PTR(ret);
+	return sg;
+}
+
+static void omap_gem_unmap_dma_buf(struct dma_buf_attachment *attachment,
+		struct sg_table *sg, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = attachment->dmabuf->priv;
+	omap_gem_put_paddr(obj);
+	sg_free_table(sg);
+	kfree(sg);
+}
+
+static void omap_gem_dmabuf_release(struct dma_buf *buffer)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	/* release reference that was taken when dmabuf was exported
+	 * in omap_gem_prime_set()..
+	 */
+	drm_gem_object_unreference_unlocked(obj);
+}
+
+
+static int omap_gem_dmabuf_begin_cpu_access(struct dma_buf *buffer,
+		size_t start, size_t len, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	if (omap_gem_flags(obj) & OMAP_BO_TILED) {
+		/* TODO we would need to pin at least part of the buffer to
+		 * get de-tiled view.  For now just reject it.
+		 */
+		return -ENOMEM;
+	}
+	/* make sure we have the pages: */
+	return omap_gem_get_pages(obj, &pages, true);
+}
+
+static void omap_gem_dmabuf_end_cpu_access(struct dma_buf *buffer,
+		size_t start, size_t len, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	omap_gem_put_pages(obj);
+}
+
+
+static void *omap_gem_dmabuf_kmap_atomic(struct dma_buf *buffer,
+		unsigned long page_num)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	return kmap_atomic(pages[page_num]);
+}
+
+static void omap_gem_dmabuf_kunmap_atomic(struct dma_buf *buffer,
+		unsigned long page_num, void *addr)
+{
+	kunmap_atomic(addr);
+}
+
+static void *omap_gem_dmabuf_kmap(struct dma_buf *buffer,
+		unsigned long page_num)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	return kmap(pages[page_num]);
+}
+
+static void omap_gem_dmabuf_kunmap(struct dma_buf *buffer,
+		unsigned long page_num, void *addr)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	kunmap(pages[page_num]);
+}
+
+struct dma_buf_ops omap_dmabuf_ops = {
+		.map_dma_buf = omap_gem_map_dma_buf,
+		.unmap_dma_buf = omap_gem_unmap_dma_buf,
+		.release = omap_gem_dmabuf_release,
+		.begin_cpu_access = omap_gem_dmabuf_begin_cpu_access,
+		.end_cpu_access = omap_gem_dmabuf_end_cpu_access,
+		.kmap_atomic = omap_gem_dmabuf_kmap_atomic,
+		.kunmap_atomic = omap_gem_dmabuf_kunmap_atomic,
+		.kmap = omap_gem_dmabuf_kmap,
+		.kunmap = omap_gem_dmabuf_kunmap,
+};
+
+struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+		struct drm_gem_object *obj, int flags)
+{
+	return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600);
+}
diff --git a/drivers/staging/omapdrm/tcm-sita.c b/drivers/staging/omapdrm/tcm-sita.c
index 10d5ac3dae4b..efb609510540 100644
--- a/drivers/staging/omapdrm/tcm-sita.c
+++ b/drivers/staging/omapdrm/tcm-sita.c
@@ -200,7 +200,7 @@ static s32 sita_reserve_1d(struct tcm *tcm, u32 num_slots,
  *
  * @param w	width
  * @param h	height
- * @param area	pointer to the area that will be populated with the reesrved
+ * @param area	pointer to the area that will be populated with the reserved
  *		area
  *
  * @return 0 on success, non-0 error value on failure.
diff --git a/drivers/staging/ozwpan/README b/drivers/staging/ozwpan/README
index bb1a69b94541..7c055ec99544 100644
--- a/drivers/staging/ozwpan/README
+++ b/drivers/staging/ozwpan/README
@@ -9,7 +9,7 @@ technology.
 
 To operate the driver must be bound to a suitable network interface. This can
 be done when the module is loaded (specifying the name of the network interface
-as a paramter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after
+as a parameter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after
 loading using an ioctl call. See the ozappif.h file and the ioctls
 OZ_IOCTL_ADD_BINDING and OZ_IOCTL_REMOVE_BINDING.
 
diff --git a/drivers/staging/ozwpan/ozappif.h b/drivers/staging/ozwpan/ozappif.h
index af0273293872..1b59b0748c6b 100644
--- a/drivers/staging/ozwpan/ozappif.h
+++ b/drivers/staging/ozwpan/ozappif.h
@@ -11,13 +11,13 @@
 #define OZ_IOCTL_MAGIC	0xf4
 
 struct oz_mac_addr {
-	unsigned char a[6];
+	__u8 a[6];
 };
 
 #define OZ_MAX_PDS	8
 
 struct oz_pd_list {
-	int count;
+	__u32 count;
 	struct oz_mac_addr addr[OZ_MAX_PDS];
 };
 
@@ -27,18 +27,10 @@ struct oz_binding_info {
 	char name[OZ_MAX_BINDING_LEN];
 };
 
-struct oz_test {
-	int action;
-};
-
 #define OZ_IOCTL_GET_PD_LIST	_IOR(OZ_IOCTL_MAGIC, 0, struct oz_pd_list)
 #define OZ_IOCTL_SET_ACTIVE_PD	_IOW(OZ_IOCTL_MAGIC, 1, struct oz_mac_addr)
 #define OZ_IOCTL_GET_ACTIVE_PD	_IOR(OZ_IOCTL_MAGIC, 2, struct oz_mac_addr)
-#define OZ_IOCTL_CLEAR_EVENTS	_IO(OZ_IOCTL_MAGIC, 3)
-#define OZ_IOCTL_GET_EVENTS	_IOR(OZ_IOCTL_MAGIC, 4, struct oz_evtlist)
 #define OZ_IOCTL_ADD_BINDING	_IOW(OZ_IOCTL_MAGIC, 5, struct oz_binding_info)
-#define OZ_IOCTL_TEST		_IOWR(OZ_IOCTL_MAGIC, 6, struct oz_test)
-#define OZ_IOCTL_SET_EVENT_MASK	_IOW(OZ_IOCTL_MAGIC, 7, unsigned long)
 #define OZ_IOCTL_REMOVE_BINDING	_IOW(OZ_IOCTL_MAGIC, 8, struct oz_binding_info)
 #define OZ_IOCTL_MAX		9
 
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index 1c380d687963..27325f74ecdc 100644
--- a/drivers/staging/ozwpan/ozcdev.c
+++ b/drivers/staging/ozwpan/ozcdev.c
@@ -41,9 +41,6 @@ struct oz_serial_ctx {
 };
 /*------------------------------------------------------------------------------
  */
-int g_taction;
-/*------------------------------------------------------------------------------
- */
 static struct oz_cdev g_cdev;
 /*------------------------------------------------------------------------------
  * Context: process and softirq
@@ -276,20 +273,6 @@ long oz_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 				return -EFAULT;
 		}
 		break;
-#ifdef WANT_EVENT_TRACE
-	case OZ_IOCTL_CLEAR_EVENTS:
-		oz_events_clear();
-		break;
-	case OZ_IOCTL_GET_EVENTS:
-		rc = oz_events_copy((void __user *)arg);
-		break;
-	case OZ_IOCTL_SET_EVENT_MASK:
-		if (copy_from_user(&g_evt_mask, (void __user *)arg,
-			sizeof(unsigned long))) {
-			return -EFAULT;
-		}
-		break;
-#endif /* WANT_EVENT_TRACE */
 	case OZ_IOCTL_ADD_BINDING:
 	case OZ_IOCTL_REMOVE_BINDING: {
 			struct oz_binding_info b;
diff --git a/drivers/staging/ozwpan/ozevent.c b/drivers/staging/ozwpan/ozevent.c
index 73703d3e96bd..7f66b4f19b01 100644
--- a/drivers/staging/ozwpan/ozevent.c
+++ b/drivers/staging/ozwpan/ozevent.c
@@ -5,29 +5,46 @@
  */
 #include "ozconfig.h"
 #ifdef WANT_EVENT_TRACE
+#include <linux/module.h>
+#include <linux/debugfs.h>
 #include <linux/jiffies.h>
 #include <linux/uaccess.h>
 #include "oztrace.h"
 #include "ozevent.h"
+#include "ozappif.h"
 /*------------------------------------------------------------------------------
+ * Although the event mask is logically part of the oz_evtdev structure, it is
+ * needed outside of this file so define it seperately to avoid the need to
+ * export definition of struct oz_evtdev.
  */
-unsigned long g_evt_mask = 0xffffffff;
+u32 g_evt_mask;
 /*------------------------------------------------------------------------------
  */
 #define OZ_MAX_EVTS	2048	/* Must be power of 2 */
-DEFINE_SPINLOCK(g_eventlock);
-static int g_evt_in;
-static int g_evt_out;
-static int g_missed_events;
-static struct oz_event g_events[OZ_MAX_EVTS];
+struct oz_evtdev {
+	struct dentry *root_dir;
+	int evt_in;
+	int evt_out;
+	int missed_events;
+	int present;
+	atomic_t users;
+	spinlock_t lock;
+	struct oz_event evts[OZ_MAX_EVTS];
+};
+
+static struct oz_evtdev g_evtdev;
+
 /*------------------------------------------------------------------------------
  * Context: process
  */
 void oz_event_init(void)
 {
+	/* Because g_evtdev is static external all fields initally zero so no
+	 * need to reinitialised those.
+	 */
 	oz_trace("Event tracing initialized\n");
-	g_evt_in = g_evt_out = 0;
-	g_missed_events = 0;
+	spin_lock_init(&g_evtdev.lock);
+	atomic_set(&g_evtdev.users, 0);
 }
 /*------------------------------------------------------------------------------
  * Context: process
@@ -43,74 +60,136 @@ void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4)
 {
 	unsigned long irqstate;
 	int ix;
-	spin_lock_irqsave(&g_eventlock, irqstate);
-	ix = (g_evt_in + 1) & (OZ_MAX_EVTS - 1);
-	if (ix != g_evt_out) {
-		struct oz_event *e = &g_events[g_evt_in];
+	spin_lock_irqsave(&g_evtdev.lock, irqstate);
+	ix = (g_evtdev.evt_in + 1) & (OZ_MAX_EVTS - 1);
+	if (ix != g_evtdev.evt_out) {
+		struct oz_event *e = &g_evtdev.evts[g_evtdev.evt_in];
 		e->jiffies = jiffies;
 		e->evt = evt;
 		e->ctx1 = ctx1;
 		e->ctx2 = ctx2;
-		e->ctx3 = ctx3;
+		e->ctx3 = (__u32)(unsigned long)ctx3;
 		e->ctx4 = ctx4;
-		g_evt_in = ix;
+		g_evtdev.evt_in = ix;
 	} else {
-		g_missed_events++;
+		g_evtdev.missed_events++;
 	}
-	spin_unlock_irqrestore(&g_eventlock, irqstate);
+	spin_unlock_irqrestore(&g_evtdev.lock, irqstate);
 }
 /*------------------------------------------------------------------------------
  * Context: process
  */
-int oz_events_copy(struct oz_evtlist __user *lst)
+static void oz_events_clear(struct oz_evtdev *dev)
 {
-	int first;
-	int ix;
-	struct hdr {
-		int count;
-		int missed;
-	} hdr;
-	ix = g_evt_out;
-	hdr.count = g_evt_in - ix;
-	if (hdr.count < 0)
-		hdr.count += OZ_MAX_EVTS;
-	if (hdr.count > OZ_EVT_LIST_SZ)
-		hdr.count = OZ_EVT_LIST_SZ;
-	hdr.missed = g_missed_events;
-	g_missed_events = 0;
-	if (copy_to_user((void __user *)lst, &hdr, sizeof(hdr)))
-		return -EFAULT;
-	first = OZ_MAX_EVTS - ix;
-	if (first > hdr.count)
-		first = hdr.count;
-	if (first) {
-		int sz = first*sizeof(struct oz_event);
-		void __user *p = (void __user *)lst->evts;
-		if (copy_to_user(p, &g_events[ix], sz))
-			return -EFAULT;
-		if (hdr.count > first) {
-			p = (void __user *)&lst->evts[first];
-			sz = (hdr.count-first)*sizeof(struct oz_event);
-			if (copy_to_user(p, g_events, sz))
-				return -EFAULT;
-		}
+	unsigned long irqstate;
+	oz_trace("Clearing events\n");
+	spin_lock_irqsave(&dev->lock, irqstate);
+	dev->evt_in = dev->evt_out = 0;
+	dev->missed_events = 0;
+	spin_unlock_irqrestore(&dev->lock, irqstate);
+}
+#ifdef CONFIG_DEBUG_FS
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+int oz_events_open(struct inode *inode, struct file *filp)
+{
+	oz_trace("oz_evt_open()\n");
+	oz_trace("Open flags: 0x%x\n", filp->f_flags);
+	if (atomic_add_return(1, &g_evtdev.users) == 1) {
+		oz_events_clear(&g_evtdev);
+		return nonseekable_open(inode, filp);
+	} else {
+		atomic_dec(&g_evtdev.users);
+		return -EBUSY;
 	}
-	ix += hdr.count;
-	if (ix >= OZ_MAX_EVTS)
-		ix -= OZ_MAX_EVTS;
-	g_evt_out = ix;
+}
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+int oz_events_release(struct inode *inode, struct file *filp)
+{
+	oz_events_clear(&g_evtdev);
+	atomic_dec(&g_evtdev.users);
+	g_evt_mask = 0;
+	oz_trace("oz_evt_release()\n");
 	return 0;
 }
 /*------------------------------------------------------------------------------
  * Context: process
  */
-void oz_events_clear(void)
+ssize_t oz_events_read(struct file *filp, char __user *buf, size_t count,
+		loff_t *fpos)
 {
-	unsigned long irqstate;
-	spin_lock_irqsave(&g_eventlock, irqstate);
-	g_evt_in = g_evt_out = 0;
-	g_missed_events = 0;
-	spin_unlock_irqrestore(&g_eventlock, irqstate);
+	struct oz_evtdev *dev = &g_evtdev;
+	int rc = 0;
+	int nb_evts = count / sizeof(struct oz_event);
+	int n;
+	int sz;
+
+	n = dev->evt_in - dev->evt_out;
+	if (n < 0)
+		n += OZ_MAX_EVTS;
+	if (nb_evts > n)
+		nb_evts = n;
+	if (nb_evts == 0)
+		goto out;
+	n = OZ_MAX_EVTS - dev->evt_out;
+	if (n > nb_evts)
+		n = nb_evts;
+	sz = n * sizeof(struct oz_event);
+	if (copy_to_user(buf, &dev->evts[dev->evt_out], sz)) {
+		rc = -EFAULT;
+		goto out;
+	}
+	if (n == nb_evts)
+		goto out2;
+	n = nb_evts - n;
+	if (copy_to_user(buf + sz, dev->evts, n * sizeof(struct oz_event))) {
+		rc = -EFAULT;
+		goto out;
+	}
+out2:
+	dev->evt_out = (dev->evt_out + nb_evts) & (OZ_MAX_EVTS - 1);
+	rc = nb_evts * sizeof(struct oz_event);
+out:
+	return rc;
 }
-#endif /* WANT_EVENT_TRACE */
+/*------------------------------------------------------------------------------
+ */
+const struct file_operations oz_events_fops = {
+	.owner =	THIS_MODULE,
+	.open =		oz_events_open,
+	.release =	oz_events_release,
+	.read =		oz_events_read,
+};
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+void oz_debugfs_init(void)
+{
+	struct dentry *parent;
 
+	parent = debugfs_create_dir("ozwpan", NULL);
+	if (parent  == NULL) {
+		oz_trace("Failed to create debugfs directory ozmo\n");
+		return;
+	} else {
+		g_evtdev.root_dir = parent;
+		if (debugfs_create_file("events", S_IRUSR, parent, NULL,
+						&oz_events_fops) == NULL)
+			oz_trace("Failed to create file ozmo/events\n");
+		if (debugfs_create_x32("event_mask", S_IRUSR | S_IWUSR, parent,
+							&g_evt_mask) == NULL)
+			oz_trace("Failed to create file ozmo/event_mask\n");
+	}
+}
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+void oz_debugfs_remove(void)
+{
+	debugfs_remove_recursive(g_evtdev.root_dir);
+}
+#endif /* CONFIG_DEBUG_FS */
+#endif /* WANT_EVENT_TRACE */
diff --git a/drivers/staging/ozwpan/ozevent.h b/drivers/staging/ozwpan/ozevent.h
index f033d014c6f3..32f6f9859c41 100644
--- a/drivers/staging/ozwpan/ozevent.h
+++ b/drivers/staging/ozwpan/ozevent.h
@@ -9,23 +9,24 @@
 #include "ozeventdef.h"
 
 #ifdef WANT_EVENT_TRACE
-extern unsigned long g_evt_mask;
+extern u32 g_evt_mask;
 void oz_event_init(void);
 void oz_event_term(void);
 void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4);
+void oz_debugfs_init(void);
+void oz_debugfs_remove(void);
 #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4) \
 	do { \
 		if ((1<<(__evt)) & g_evt_mask) \
 			oz_event_log2(__evt, __ctx1, __ctx2, __ctx3, __ctx4); \
 	} while (0)
-int oz_events_copy(struct oz_evtlist __user *lst);
-void oz_events_clear(void);
+
 #else
 #define oz_event_init()
 #define oz_event_term()
 #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4)
-#define oz_events_copy(__lst)
-#define oz_events_clear()
+#define oz_debugfs_init()
+#define oz_debugfs_remove()
 #endif /* WANT_EVENT_TRACE */
 
 #endif /* _OZEVENT_H */
diff --git a/drivers/staging/ozwpan/ozeventdef.h b/drivers/staging/ozwpan/ozeventdef.h
index a880288bab11..4b938981671a 100644
--- a/drivers/staging/ozwpan/ozeventdef.h
+++ b/drivers/staging/ozwpan/ozeventdef.h
@@ -29,19 +29,12 @@
 #define OZ_EVT_DEBUG		20
 
 struct oz_event {
-	unsigned long jiffies;
-	unsigned char evt;
-	unsigned char ctx1;
-	unsigned short ctx2;
-	void *ctx3;
-	unsigned ctx4;
-};
-
-#define OZ_EVT_LIST_SZ	64
-struct oz_evtlist {
-	int count;
-	int missed;
-	struct oz_event evts[OZ_EVT_LIST_SZ];
+	__u32 jiffies;
+	__u8 evt;
+	__u8 ctx1;
+	__u16 ctx2;
+	__u32 ctx3;
+	__u32 ctx4;
 };
 
 #endif /* _OZEVENTDEF_H */
diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhcd.c
index 750b14eb505e..251f07c39a6b 100644
--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@@ -1416,7 +1416,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			oz_trace("USB_REQ_SET_CONFIGURATION - req\n");
 			break;
 		case USB_REQ_GET_CONFIGURATION:
-			/* We short curcuit this case and reply directly since
+			/* We short circuit this case and reply directly since
 			 * we have the selected configuration number cached.
 			 */
 			oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0,
@@ -1432,7 +1432,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			}
 			break;
 		case USB_REQ_GET_INTERFACE:
-			/* We short curcuit this case and reply directly since
+			/* We short circuit this case and reply directly since
 			 * we have the selected interface alternative cached.
 			 */
 			oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0,
@@ -1463,7 +1463,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			rc = -ENOMEM;
 		} else {
 			/* Note: we are queuing the request after we have
-			 * submitted it to be tranmitted. If the request were
+			 * submitted it to be transmitted. If the request were
 			 * to complete before we queued it then it would not
 			 * be found in the queue. It seems impossible for
 			 * this to happen but if it did the request would
diff --git a/drivers/staging/ozwpan/ozmain.c b/drivers/staging/ozwpan/ozmain.c
index aaf2ccc0bcfb..7579645d642a 100644
--- a/drivers/staging/ozwpan/ozmain.c
+++ b/drivers/staging/ozwpan/ozmain.c
@@ -33,6 +33,9 @@ static int __init ozwpan_init(void)
 	oz_protocol_init(g_net_dev);
 	oz_app_enable(OZ_APPID_USB, 1);
 	oz_apps_init();
+#ifdef CONFIG_DEBUG_FS
+	oz_debugfs_init();
+#endif
 	return 0;
 }
 /*------------------------------------------------------------------------------
@@ -44,6 +47,9 @@ static void __exit ozwpan_exit(void)
 	oz_apps_term();
 	oz_cdev_deregister();
 	oz_event_term();
+#ifdef CONFIG_DEBUG_FS
+	oz_debugfs_remove();
+#endif
 }
 /*------------------------------------------------------------------------------
  */
@@ -53,6 +59,6 @@ module_exit(ozwpan_exit);
 
 MODULE_AUTHOR("Chris Kelly");
 MODULE_DESCRIPTION("Ozmo Devices USB over WiFi hcd driver");
-MODULE_VERSION("1.0.8");
+MODULE_VERSION("1.0.9");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/staging/ozwpan/ozusbsvc.c b/drivers/staging/ozwpan/ozusbsvc.c
index 9e74f9602384..8fa7f256ad8c 100644
--- a/drivers/staging/ozwpan/ozusbsvc.c
+++ b/drivers/staging/ozwpan/ozusbsvc.c
@@ -7,7 +7,7 @@
  * The implementation of this service is split into two parts the first of which
  * is protocol independent and the second contains protocol specific details.
  * This split is to allow alternative protocols to be defined.
- * The implemenation of this service uses ozhcd.c to implement a USB HCD.
+ * The implementation of this service uses ozhcd.c to implement a USB HCD.
  * -----------------------------------------------------------------------------
  */
 #include <linux/init.h>
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 6183573f112f..7365089a33e8 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -754,7 +754,7 @@ static void lcd_backlight(int on)
 	if (lcd_bl_pin == PIN_NONE)
 		return;
 
-	/* The backlight is activated by seting the AUTOFEED line to +5V  */
+	/* The backlight is activated by setting the AUTOFEED line to +5V  */
 	spin_lock(&pprt_lock);
 	bits.bl = on;
 	panel_set_bits();
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index bb977e00cc86..801b50d3bc31 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -541,7 +541,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dbg("port->write_urb == NULL, allocating one");
 		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!port->write_urb) {
-			err("Allocating write URB failed");
+			dev_err(&port->dev, "Allocating write URB failed\n");
 			return -ENOMEM;
 		}
 		/* buffer same size as port0 */
@@ -549,7 +549,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 		port->bulk_out_buffer = kmalloc(port->bulk_out_size,
 						GFP_KERNEL);
 		if (!port->bulk_out_buffer) {
-			err("Couldn't allocate bulk_out_buffer");
+			dev_err(&port->dev, "Couldn't allocate bulk_out_buffer\n");
 			return -ENOMEM;
 		}
 	}
@@ -732,7 +732,7 @@ static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* We must fill the first 5 bytes of anything we sent with a transmit
-	 * header which directes the data to the correct port. The maximum
+	 * header which directs the data to the correct port. The maximum
 	 * size we can send out in one URB is port->bulk_out_size, which caps
 	 * the number of bytes of real data we can send in each write. As the
 	 * semantics of write allow us to write less than we were give, we cap
diff --git a/drivers/staging/ramster/cluster/tcp.c b/drivers/staging/ramster/cluster/tcp.c
index 3af1b2c51b78..3490192f8ca2 100644
--- a/drivers/staging/ramster/cluster/tcp.c
+++ b/drivers/staging/ramster/cluster/tcp.c
@@ -111,7 +111,7 @@ static struct socket *r2net_listen_sock;
  * r2net_wq.  teardown detaches the callbacks before destroying the workqueue.
  * quorum work is queued as sock containers are shutdown.. stop_listening
  * tears down all the node's sock containers, preventing future shutdowns
- * and queued quroum work, before canceling delayed quorum work and
+ * and queued quorum work, before canceling delayed quorum work and
  * destroying the work queue.
  */
 static struct workqueue_struct *r2net_wq;
@@ -660,7 +660,7 @@ out:
 
 /*
  * we register callbacks so we can queue work on events before calling
- * the original callbacks.  our callbacks our careful to test user_data
+ * the original callbacks.  our callbacks are careful to test user_data
  * to discover when they've reaced with r2net_unregister_callbacks().
  */
 static void r2net_register_callbacks(struct sock *sk,
diff --git a/drivers/staging/ramster/xvmalloc.c b/drivers/staging/ramster/xvmalloc.c
index 93ba8e9407aa..44ceb0b823a9 100644
--- a/drivers/staging/ramster/xvmalloc.c
+++ b/drivers/staging/ramster/xvmalloc.c
@@ -132,7 +132,7 @@ static u32 find_block(struct xv_pool *pool, u32 size,
 	if (!pool->flbitmap)
 		return 0;
 
-	/* Get freelist index correspoding to this size */
+	/* Get freelist index corresponding to this size */
 	slindex = get_index(size);
 	slbitmap = pool->slbitmap[slindex / BITS_PER_LONG];
 	slbitstart = slindex % BITS_PER_LONG;
diff --git a/drivers/staging/ramster/zcache-main.c b/drivers/staging/ramster/zcache-main.c
index 68b2e053a0e6..c071111f06f3 100644
--- a/drivers/staging/ramster/zcache-main.c
+++ b/drivers/staging/ramster/zcache-main.c
@@ -2095,7 +2095,7 @@ out:
 /*
  * Called on a remote persistent tmem_get to attempt to preallocate
  * local storage for the data contained in the remote persistent page.
- * If succesfully preallocated, returns the pampd, marked as remote and
+ * If successfully preallocated, returns the pampd, marked as remote and
  * in_transit.  Else returns NULL.  Note that the appropriate tmem data
  * structure must be locked.
  */
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
index 72db504b23b4..91d1aa2830c9 100644
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER
 ccflags-y += -DSW_DIG
 ccflags-y += -DRATE_ADAPT
 
-#enable it for legacy power save, disable it for leisure  power save
+#enable it for legacy power save, disable it for leisure power save
 ccflags-y += -DENABLE_LPS
 
 
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
index 309bb8bf287e..0e93eb0735a7 100644
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee)
 
 //
 //	Description:
-//		Update country IE from Beacon or Probe Resopnse
+//		Update country IE from Beacon or Probe Response
 //		and configure PHY for operation in the regulatory domain.
 //
 //	TODO:
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index 40dd715d9df7..b94c48b29302 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -834,7 +834,7 @@ enum ieee80211_state {
 	/* the association procedure is sending AUTH request*/
 	IEEE80211_ASSOCIATING_AUTHENTICATING,
 
-	/* the association procedure has successfully authentcated
+	/* the association procedure has successfully authenticated
 	 * and is sending association request
 	 */
 	IEEE80211_ASSOCIATING_AUTHENTICATED,
@@ -934,7 +934,7 @@ struct ieee80211_device {
 			   * with RX of broad/multicast frames */
 
 	/* Fragmentation structures */
-	// each streaming contain a entry
+	/* each stream contains an entry */
 	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
 	unsigned int frag_next_idx[17];
 	u16 fts; /* Fragmentation Threshold */
@@ -972,7 +972,7 @@ struct ieee80211_device {
 
 	int rate;       /* current rate */
 	int basic_rate;
-	//FIXME: pleace callback, see if redundant with softmac_features
+	//FIXME: please callback, see if redundant with softmac_features
 	short active_scan;
 
 	/* this contains flags for selectively enable softmac support */
@@ -1106,7 +1106,7 @@ struct ieee80211_device {
 
 	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
 	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
 	 * then also management frames are sent via this callback.
 	 * This function can't sleep.
 	 */
@@ -1124,7 +1124,7 @@ struct ieee80211_device {
 
 	/* ask to the driver to retune the radio .
 	 * This function can sleep. the driver should ensure
-	 * the radio has been swithced before return.
+	 * the radio has been switched before return.
 	 */
 	void (*set_chan)(struct net_device *dev,short ch);
 
@@ -1135,7 +1135,7 @@ struct ieee80211_device {
 	 * The syncro version is similar to the start_scan but
 	 * does not return until all channels has been scanned.
 	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * it is called in a work_queue when switching to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
 	 * the function stop_scan should stop both the syncro and
@@ -1196,7 +1196,7 @@ struct ieee80211_device {
 /* Generate probe requests */
 #define IEEE_SOFTMAC_PROBERQ (1<<4)
 
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
 #define IEEE_SOFTMAC_PROBERS (1<<5)
 
 /* The ieee802.11 stack will manages the netif queue
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 26bacb96d247..8173240dcf7a 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net)
 	return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
 }
 
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
  * tag and the EXTENDED RATE MFIE tag if needed.
  * It encludes two bytes per tag for the tag itself and its len
  */
@@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
 	return rate_len;
 }
 
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) poised.
  * Then it updates the pointer so that
  * it points after the new MFIE tag added.
  */
@@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
 		 *    that we are still logically linked (not interested in
 		 *    new network events, despite for updating the net list,
-		 *    but we are temporarly 'unlinked' as the driver shall
+		 *    but we are temporarily 'unlinked' as the driver shall
 		 *    not filter RX frames and the channel is changing.
 		 * So the only situation in witch are interested is to check
 		 * if the state become LINKED because of the #1 situation
@@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
                  *    So we switch to IEEE80211_LINKED_SCANNING to remember
                  *    that we are still logically linked (not interested in
                  *    new network events, despite for updating the net list,
-                 *    but we are temporarly 'unlinked' as the driver shall
+                 *    but we are temporarily 'unlinked' as the driver shall
                  *    not filter RX frames and the channel is changing.
                  * So the only situation in witch are interested is to check
                  * if the state become LINKED because of the #1 situation
@@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
 
 	ieee->associate_seq++;
 
-	/* don't scan, and avoid to have the RX path possibily
+	/* don't scan, and avoid to have the RX path possibly
 	 * try again to associate. Even do not react to AUTH or
 	 * ASSOC response. Just wait for the retry wq to be scheduled.
 	 * Here we will check if there are good nets to associate
@@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 		//printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch);
 
 		if (	/* if the user set the AP check if match.
-			 * if the network does not broadcast essid we check the user supplyed ANY essid
+			 * if the network does not broadcast essid we check the user supplied ANY essid
 			 * if the network does broadcast and the user does not set essid it is OK
 			 * if the network does broadcast and the user did set essid chech if essid match
 			 */
 				( apset && apmatch &&
 				  ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
 				/* if the ap is not set, check that the user set the bssid
-				 * and the network does bradcast and that those two bssid matches
+				 * and the network does broadcast and that those two bssid matches
 				 */
 				(!apset && ssidset && ssidbroad && ssidmatch)
 		   ){
@@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 
 					while (left >= sizeof(struct ieee80211_info_element_hdr)) {
 						if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-							printk(KERN_WARNING "[re]associate reeponse error!");
+							printk(KERN_WARNING "[re]associate response error!");
 							return 1;
 						}
 						switch (info_element->id) {
@@ -1905,7 +1905,7 @@ associate_complete:
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 
@@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
 
 	if(ieee->state == IEEE80211_NOLINK)
 		ieee->current_network.channel = 10;
-	/* if not then the state is not linked. Maybe the user swithced to
+	/* if not then the state is not linked. Maybe the user switched to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
 	 * time to scan all the chans..) or we have just run up the iface
 	 * after setting ad-hoc mode. So we have to give another try..
 	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tryed to associate when
+	 * (in bss mode we had to make sure no-one tried to associate when
 	 * we had just checked the ieee->state and we was going to start the
-	 * scan) beacause in ibss mode the ieee80211_new_net function, when
+	 * scan) because in ibss mode the ieee80211_new_net function, when
 	 * finds a good net, just set the ieee->state to IEEE80211_LINKED,
 	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
 	 * scan, that will stop at the first round because it sees the state
@@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work)
 		goto exit;
 	/* until we do not set the state to IEEE80211_NOLINK
 	* there are no possibility to have someone else trying
-	* to start an association procdure (we get here with
+	* to start an association procedure (we get here with
 	* ieee->state = IEEE80211_ASSOCIATING).
 	* When we set the state to IEEE80211_NOLINK it is possible
 	* that the RX path run an attempt to associate, but
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index e46ff2ffa09b..5d204906baf7 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
 		ieee80211_stop_protocol(ieee);
 
 	/* this is just to be sure that the GET wx callback
-	 * has consisten infos. not needed otherwise
+	 * has consistent infos. not needed otherwise
 	 */
 	spin_lock_irqsave(&ieee->lock, flags);
 
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index 552115cd760e..77bb068d4a51 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb,
 	//printk(KERN_WARNING "upper layer packet!\n");
 	spin_lock_irqsave(&ieee->lock, flags);
 
-	/* If there is no driver handler to take the TXB, dont' bother
+	/* If there is no driver handler to take the TXB, don't bother
 	 * creating it... */
 	if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
 	   ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index ca414a915a4e..c7917b24425c 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 				       (*crypt)->priv);
 		sec.flags |= (1 << key);
 		/* This ensures a key will be activated if no key is
-		 * explicitely set */
+		 * explicitly set */
 		if (key == sec.active_key)
 			sec.flags |= SEC_ACTIVE_KEY;
 		ieee->tx_keyidx = key;//by wb 080312
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index a2c46ae4a400..2682afbac4ff 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -11,7 +11,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -514,12 +514,12 @@ typedef struct r8180_priv
 	bool bDefaultAntenna1;
 	u8 SignalStrength;
 	long Stats_SignalStrength;
-	long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average.
+	long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average.
 	u8	 SignalQuality; // in 0-100 index.
 	long Stats_SignalQuality;
 	long RecvSignalPower; // in dBm.
 	long Stats_RecvSignalPower;
-	u8	 LastRxPktAntenna;	// +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
+	u8	 LastRxPktAntenna;	// +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
 	u32 AdRxOkCnt;
 	long AdRxSignalStrength;
 	u8 CurrAntennaIndex;			// Index to current Antenna (both Tx and Rx).
@@ -530,7 +530,7 @@ typedef struct r8180_priv
 	long AdRxSsThreshold;			// Signal strength threshold to switch antenna.
 	long AdMaxRxSsThreshold;			// Max value of AdRxSsThreshold.
 	bool bAdSwitchedChecking;		// TRUE if we shall shall check Rx signal strength for last time switching antenna.
-	long AdRxSsBeforeSwitched;		// Rx signal strength before we swithed antenna.
+	long AdRxSsBeforeSwitched;		// Rx signal strength before we switched antenna.
 	struct timer_list SwAntennaDiversityTimer;
 //by amy for antenna
 //{by amy 080312
@@ -553,7 +553,7 @@ typedef struct r8180_priv
 	bool				bDigMechanism; // TRUE if DIG is enabled, FALSE ow.
 	bool				bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko.
 	u32					FalseAlarmRegValue;
-	u8					RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG.
+	u8					RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG.
 	u8					DIG_NumberFallbackVote;
 	u8					DIG_NumberUpgradeVote;
 	// For HW antenna diversity, added by Roger, 2008.01.30.
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 4fe52f6b0034..a513ec73ea15 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate)
 }
 
 /*
- * For Netgear case, they want good-looking singal strength.
+ * For Netgear case, they want good-looking signal strength.
  */
 long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
 {
@@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex)
 
 /*
  * Perform signal smoothing for dynamic mechanism.
- * This is different with PerformSignalSmoothing8185 in smoothing fomula.
+ * This is different with PerformSignalSmoothing8185 in smoothing formula.
  * No dramatic adjustion is apply because dynamic mechanism need some degree
  * of correctness. Ported from 8187B.
  */
@@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev)
 			/* HW is probably passing several buggy frames
 			* without FD or LD flag set.
 			* Throw this garbage away to prevent skb
-			* memory exausting
+			* memory exhausting
 			*/
 			if (!priv->rx_skb_complete)
 				dev_kfree_skb_any(priv->rx_skb);
@@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev)
 			priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6;
 			priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6;
 
-		/* Figure out which antenna that received the lasted packet. */
+		/* Figure out which antenna that received the last packet. */
 			priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */
 			SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
 		}
 
 		if (first) {
 			if (!priv->rx_skb_complete) {
-				/* seems that HW sometimes fails to reiceve and
+				/* seems that HW sometimes fails to receive and
 				   doesn't provide the last descriptor */
 				dev_kfree_skb_any(priv->rx_skb);
 				priv->stats.rxnolast++;
@@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev)
 			priv->rx_skb_complete = 0;
 			priv->rx_skb->dev = dev;
 		} else {
-			/* if we are here we should  have already RXed
+			/* if we are here we should have already RXed
 			* the first frame.
 			* If we get here and the skb is not allocated then
 			* we have just throw out garbage (skb not allocated)
@@ -1821,15 +1821,15 @@ rate) {
 /*
  * This is a rough attempt to TX a frame
  * This is called by the ieee 80211 stack to TX management frames.
- * If the ring is full packet are dropped (for data frame the queue
+ * If the ring is full packets are dropped (for data frame the queue
  * is stopped before this can happen). For this reason it is better
  * if the descriptors are larger than the largest management frame
- * we intend to TX: i'm unsure what the HW does if it will not found
+ * we intend to TX: i'm unsure what the HW does if it will not find
  * the last fragment of a frame because it has been dropped...
  * Since queues for Management and Data frames are different we
  * might use a different lock than tx_lock (for example mgmt_tx_lock)
  */
-/* these function may loops if invoked with 0 descriptors or 0 len buffer */
+/* these function may loop if invoked with 0 descriptors or 0 len buffer */
 int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -2378,7 +2378,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
 				u8		u1bAIFS;
 				u32		u4bAcParam;
 				pAcParam = (PAC_PARAM)(&AcParam);
-				/* Retrive paramters to udpate. */
+				/* Retrieve paramters to update. */
 				u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
 				u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)|
 					      (((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)|
@@ -2414,7 +2414,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
 			u8		u1bAIFS;
 			u32		u4bAcParam;
 
-			/* Retrive paramters to udpate. */
+			/* Retrieve paramters to update. */
 			eACI = pAcParam->f.AciAifsn.f.ACI;
 			/* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
 			u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
@@ -2700,7 +2700,7 @@ short rtl8180_init(struct net_device *dev)
 	priv->bTxPowerTrack = false;
 	priv->ThermalMeter = 0;
 	priv->FalseAlarmRegValue = 0;
-	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */
+	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */
 	priv->DIG_NumberFallbackVote = 0;
 	priv->DIG_NumberUpgradeVote = 0;
 	priv->LastSignalStrengthInPercent = 0;
@@ -2896,7 +2896,7 @@ short rtl8180_init(struct net_device *dev)
 		priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
 	}
 
-	/* 3Read crystal calibtration and thermal meter indication on 87SE. */
+	/* 3Read crystal calibration and thermal meter indication on 87SE. */
 	eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
 
 	/* Crystal calibration for Xin and Xout resp. */
@@ -3140,7 +3140,7 @@ void rtl8180_adapter_start(struct net_device *dev)
 
 	/*
 	 * The following is very strange. seems to be that 1 means test mode,
-	 * but we need to acknolwledges the nic when a packet is ready
+	 * but we need to acknowledges the nic when a packet is ready
 	 * although we set it to 0
 	 */
 
@@ -3971,7 +3971,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs)
 	}
 
 	if (inta == 0xffff) {
-		/* HW disappared */
+		/* HW disappeared */
 		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
 		return IRQ_HANDLED;
 	}
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index 4d7a5951486e..b8f2ba010a04 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -2,7 +2,7 @@
 #include "r8180_hw.h"
 #include "r8180_93cx6.h"
 
- /*	Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */
+ /*	Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
 #define RATE_ADAPTIVE_TIMER_PERIOD      300
 
 bool CheckHighPower(struct net_device *dev)
@@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work)
 
 
 /*
- *	Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
+ *	Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
  */
 bool CheckDig(struct net_device *dev)
 {
@@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 	 *		and retry rate.
 	 * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
 	 *		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
-	 * (4) Add the mehanism of trying to upgrade tx rate.
+	 * (4) Add the mechanism of trying to upgrade tx rate.
 	 * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
 	 *
 	 */
@@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 	if (priv->bTryuping == true) {
 		/* 2 For Test Upgrading mechanism
 		 * Note:
-		 *	Sometimes the throughput is upon on the capability bwtween the AP and NIC,
+		 *	Sometimes the throughput is upon on the capability between the AP and NIC,
 		 *	thus the low data rate does not improve the performance.
 		 *	We randomly upgrade the data rate and check if the retry rate is improved.
 		 */
@@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 
 			/* 
 			 * The difference in throughput between 48Mbps and 36Mbps is 8M.
-			 * So, we must be carefully in this rate scale. Isaiah 2008-02-15.
+			 * So, we must be careful in this rate scale. Isaiah 2008-02-15.
 			 */
 			if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
 				(priv->FailTxRateCount > 2))
@@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev)
 			if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
 				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
 
-			/* Wrong deceision => switch back. */
+			/* Wrong decision => switch back. */
 			SwitchAntenna(dev);
 		} else {
 		/* Rx Signal Strength is improved. */
@@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev)
 		}
 		/*
 		 * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
-		 * didn't changed by HW evaluation.
+		 * didn't change by HW evaluation.
 		 * 2008.02.27.
 		 *
 		 * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
@@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev)
 	priv->AdAuxAntennaRxOkCnt = 0;
 }
 
- /*	Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */
+ /*	Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
 bool CheckTxPwrTracking(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index ee5b867fd0d4..d28c1d996084 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
 		write_phy_cck(dev, 0x44 + i, power);
 	}
 
-	/* FIXME Is this delay really needeed ? */
+	/* FIXME Is this delay really needed ? */
 	force_pci_posting(dev);
 	mdelay(1);
 
@@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
 
 	/*
 	 * TRUE if we want to use a default implementation.
-	 * We shall set it to FALSE when we have exact translation formular
+	 * We shall set it to FALSE when we have exact translation formula
 	 * for target IC. 070622, by rcnjko.
 	 */
 	if (bUseDefault) {
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
index 303ec691262a..46ee6f47f525 100644
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -13,7 +13,7 @@
 
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-	We want to tanks the Authors of those projects and the Ndiswrapper
+	We want to thanks the Authors of those projects and the Ndiswrapper
 	project Authors.
 */
 
@@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] =	{
 		r8180_wx_set_wap,			/* SIOCSIWAP */
 		r8180_wx_get_wap,			/* SIOCGIWAP */
 		r8180_wx_set_mlme,			/* SIOCSIWMLME*/
-		dummy,					/* SIOCGIWAPLIST -- depricated */
+		dummy,					/* SIOCGIWAPLIST -- deprecated */
 		r8180_wx_set_scan,			/* SIOCSIWSCAN */
 		r8180_wx_get_scan,			/* SIOCGIWSCAN */
 		r8180_wx_set_essid,			/* SIOCSIWESSID */
@@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src,
 			(dst->capability & WLAN_CAPABILITY_BSS)));
 }
 
-/* WB modefied to show signal to GUI on 18-01-2008 */
+/* WB modified to show signal to GUI on 18-01-2008 */
 static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h
index 735d03dceed3..408191403112 100644
--- a/drivers/staging/rtl8187se/r8180_wx.h
+++ b/drivers/staging/rtl8187se/r8180_wx.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 4b0b830f9ab6..914495783c06 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1,22 +1,22 @@
-/*++
-Copyright (c) Realtek Semiconductor Corp. All rights reserved.
-
-Module Name:
-	r8185b_init.c
-
-Abstract:
-	Hardware Initialization and Hardware IO for RTL8185B
-
-Major Change History:
-	When		Who				What
-	----------	---------------		-------------------------------
-	2006-11-15    Xiong		Created
-
-Notes:
-	This file is ported from RTL8185B Windows driver.
-
-
---*/
+/*
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Module Name:
+ *	r8185b_init.c
+ *
+ * Abstract:
+ *	Hardware Initialization and Hardware IO for RTL8185B
+ *
+ * Major Change History:
+ *	When		Who				What
+ *	----------	---------------		-------------------------------
+ *	2006-11-15	Xiong			Created
+ *
+ * Notes:
+ *	This file is ported from RTL8185B Windows driver.
+ *
+ *
+ */
 
 /*--------------------------Include File------------------------------------*/
 #include <linux/spinlock.h>
@@ -25,155 +25,134 @@ Notes:
 #include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
 #include "r8180_93cx6.h"   /* Card EEPROM */
 #include "r8180_wx.h"
-
 #include "ieee80211/dot11d.h"
-
-
 /* #define CONFIG_RTL8180_IO_MAP */
-
 #define TC_3W_POLL_MAX_TRY_CNT 5
+
 static u8 MAC_REG_TABLE[][2] =	{
-                        /*PAGA 0:	*/
-						/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185()	*/
-						/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().					*/
-						/* 0x1F0~0x1F8  set in MacConfig_85BASIC()												*/
-						{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
-						{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
-						{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
-						{0x94, 0x0F}, {0x95, 0x32},
-						{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
-						{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
-						{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
-						{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
-						{0xff, 0x00},
-
-						/*PAGE 1:	*/
-						/* For Flextronics system Logo PCIHCT failure:	*/
-				/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1	*/
-						{0x5e, 0x01},
-						{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
-						{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
-						{0x82, 0xFF}, {0x83, 0x03},
-						{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
-						{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */
-						{0xe2, 0x00},
-
-
-						/* PAGE 2: */
-						{0x5e, 0x02},
-						{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
-						{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
-						{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
-						{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
-						{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
-						{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
-						{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
-						/* PAGA 0: */
-						{0x5e, 0x00}, {0x9f, 0x03}
-			};
-
-
-static u8  ZEBRA_AGC[]	=	{
-			0,
-			0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
-			0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
-			0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-			0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
-			0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-			0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
-			0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
-			};
-
-static u32 ZEBRA_RF_RX_GAIN_TABLE[]	=	{
-			0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
-			0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
-			0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
-			0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
-			0x0183, 0x0163, 0x0143, 0x0123, 0x0103
+	/*PAGA 0:	*/
+	/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
+	/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
+	/* 0x1F0~0x1F8  set in MacConfig_85BASIC() */
+	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
+	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
+	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
+	{0x94, 0x0F}, {0x95, 0x32},
+	{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
+	{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
+	{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
+	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
+	{0xff, 0x00},
+
+	/*PAGE 1: */
+	/* For Flextronics system Logo PCIHCT failure: */
+	/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
+	{0x5e, 0x01},
+	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
+	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
+	{0x82, 0xFF}, {0x83, 0x03},
+	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
+	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */
+	{0xe2, 0x00},
+
+
+	/* PAGE 2: */
+	{0x5e, 0x02},
+	{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
+	{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
+	{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
+	{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
+	{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
+	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
+	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
+
+	/* PAGA 0: */
+	{0x5e, 0x00}, {0x9f, 0x03}
+	};
+
+
+static u8  ZEBRA_AGC[] = {
+	0,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+	};
+
+static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
+	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
 	};
 
-static u8 OFDM_CONFIG[]	=	{
-			/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX				*/
-			/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode					*/
-			/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test	*/
-
-			/* 0x00	*/
-			0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
-			0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
-			/* 0x10	*/
-			0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
-			0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
-			/* 0x20	*/
-			0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
-			0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
-			/* 0x30	*/
-			0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
-			0xD8, 0x3C, 0x7B, 0x10, 0x10
-		};
-
-/*	---------------------------------------------------------------
-	*	Hardware IO
-	*	the code is ported from Windows source code
-	----------------------------------------------------------------*/
-
-void
-PlatformIOWrite1Byte(
-	struct net_device *dev,
-	u32		offset,
-	u8		data
-	)
+static u8 OFDM_CONFIG[]	= {
+	/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
+	/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
+	/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
+	/* 0x00	*/
+	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
+	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
+	/* 0x10	*/
+	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
+	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
+	/* 0x20	*/
+	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
+	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
+	/* 0x30	*/
+	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
+	0xD8, 0x3C, 0x7B, 0x10, 0x10
+	};
+
+	/*---------------------------------------------------------------
+	 *	Hardware IO
+	 *	the code is ported from Windows source code
+	 *---------------------------------------------------------------
+	 */
+
+void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
-	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko.	*/
-
+	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
-void
-PlatformIOWrite2Byte(
-	struct net_device *dev,
-	u32		offset,
-	u16		data
-	)
+void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
 	write_nic_word(dev, offset, data);
 	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
-
-
 }
+
 u8 PlatformIORead1Byte(struct net_device *dev, u32 offset);
 
-void
-PlatformIOWrite4Byte(
-	struct net_device *dev,
-	u32		offset,
-	u32		data
-	)
+void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
-/* {by amy 080312 */
-if (offset == PhyAddr)	{
-/* For Base Band configuration. */
+	if (offset == PhyAddr) {
+	/* For Base Band configuration. */
 		unsigned char	cmdByte;
 		unsigned long	dataBytes;
 		unsigned char	idx;
-		u8	u1bTmp;
+		u8		u1bTmp;
 
 		cmdByte = (u8)(data & 0x000000ff);
 		dataBytes = data>>8;
 
 		/*
-			071010, rcnjko:
-			The critical section is only BB read/write race condition.
-			Assumption:
-			1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
-			acquiring the spinlock in such context.
-			2. PlatformIOWrite4Byte() MUST NOT be recursive.
-		*/
-/*		NdisAcquireSpinLock( &(pDevice->IoSpinLock) );	*/
-
-		for (idx = 0; idx < 30; idx++)	{ 
-		/* Make sure command bit is clear before access it.	*/
+		 *	071010, rcnjko:
+		 *	The critical section is only BB read/write race condition.
+		 *	Assumption:
+		 *	1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
+		 *	acquiring the spinlock in such context.
+		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
+		 */
+		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
+
+		for (idx = 0; idx < 30; idx++) {
+		/* Make sure command bit is clear before access it. */
 			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
 			if ((u1bTmp & BIT7) == 0)
 				break;
@@ -186,20 +165,14 @@ if (offset == PhyAddr)	{
 
 		write_nic_byte(dev, offset, cmdByte);
 
-/*		NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
-	}
-/* by amy 080312} */
-	else	{
+		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
+	} else {
 		write_nic_dword(dev, offset, data);
 		read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 	}
 }
 
-u8
-PlatformIORead1Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
 {
 	u8	data = 0;
 
@@ -209,11 +182,7 @@ PlatformIORead1Byte(
 	return data;
 }
 
-u16
-PlatformIORead2Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u16 PlatformIORead2Byte(struct net_device *dev, u32 offset)
 {
 	u16	data = 0;
 
@@ -223,11 +192,7 @@ PlatformIORead2Byte(
 	return data;
 }
 
-u32
-PlatformIORead4Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u32 PlatformIORead4Byte(struct net_device *dev, u32 offset)
 {
 	u32	data = 0;
 
@@ -242,22 +207,19 @@ void SetOutputEnableOfRfPins(struct net_device *dev)
 	write_nic_word(dev, RFPinsEnable, 0x1bff);
 }
 
-static int
-HwHSSIThreeWire(
-	struct net_device *dev,
-	u8			*pDataBuf,
-	u8			nDataBufBitCnt,
-	int			bSI,
-	int			bWrite
-	)
+static int HwHSSIThreeWire(struct net_device *dev,
+			   u8 *pDataBuf,
+			   u8 nDataBufBitCnt,
+			   int bSI,
+			   int bWrite)
 {
 	int	bResult = 1;
 	u8	TryCnt;
 	u8	u1bTmp;
 
-	do	{
+	do {
 		/* Check if WE and RE are cleared. */
-		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)	{
+		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
 			u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
 			if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
 				break;
@@ -275,15 +237,15 @@ HwHSSIThreeWire(
 		u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
 
 		if (bSI)
-			u1bTmp |=   RF_SW_CFG_SI;   /* reg08[1]=1 Serial Interface(SI)	*/
+			u1bTmp |=   RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
 
 		else
-			u1bTmp &= ~RF_SW_CFG_SI;  /* reg08[1]=0 Parallel Interface(PI)	*/
+			u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
 
 
 		write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
 
-		if (bSI)	{
+		if (bSI) {
 			/* jong: HW SI read must set reg84[3]=0. */
 			u1bTmp = read_nic_byte(dev, RFPinsSelect);
 			u1bTmp &= ~BIT3;
@@ -291,14 +253,14 @@ HwHSSIThreeWire(
 		}
 		/*  Fill up data buffer for write operation. */
 
-		if (bWrite)	{
-			if (nDataBufBitCnt == 16)	{
+		if (bWrite) {
+			if (nDataBufBitCnt == 16) {
 				write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-			}	else if (nDataBufBitCnt == 64)	{
+			} else if (nDataBufBitCnt == 64) {
 			/* RTL8187S shouldn't enter this case */
 				write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
 				write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
-			}	else	{
+			} else {
 				int idx;
 				int ByteCnt = nDataBufBitCnt / 8;
 								/* printk("%d\n",nDataBufBitCnt); */
@@ -324,11 +286,11 @@ HwHSSIThreeWire(
 					write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
 
 			}
-		}	else	{	/* read */
-			if (bSI)	{
-				/* SI - reg274[3:0] : RF register's Address	*/
+		} else {	/* read */
+			if (bSI) {
+				/* SI - reg274[3:0] : RF register's Address */
 				write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-			}	else	{
+			} else {
 				/*  PI - reg274[15:12] : RF register's Address */
 				write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
 			}
@@ -343,7 +305,7 @@ HwHSSIThreeWire(
 
 
 		/* Check if DONE is set. */
-		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)	{
+		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
 			u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
 			if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
 				break;
@@ -353,12 +315,12 @@ HwHSSIThreeWire(
 
 		write_nic_byte(dev, SW_3W_CMD1, 0);
 
-		/* Read back data for read operation.	*/
-		if (bWrite == 0)	{
-			if (bSI)		{
+		/* Read back data for read operation. */
+		if (bWrite == 0) {
+			if (bSI) {
 				/* Serial Interface : reg363_362[11:0] */
 				*((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
-			}	else	{
+			} else {
 				/* Parallel Interface : reg361_360[11:0] */
 				*((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
 			}
@@ -366,13 +328,12 @@ HwHSSIThreeWire(
 			*((u16 *)pDataBuf) &= 0x0FFF;
 		}
 
-	}	while (0);
+	} while (0);
 
 	return bResult;
 }
 
-void
-RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
+void RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
 {
 	u32 data2Write;
 	u8 len;
@@ -400,11 +361,7 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset)
 
 
 /* by Owen on 04/07/14 for writing BB register successfully */
-void
-WriteBBPortUchar(
-	struct net_device *dev,
-	u32		Data
-	)
+void WriteBBPortUchar(struct net_device *dev, u32 Data)
 {
 	/* u8	TimeoutCounter; */
 	u8	RegisterContent;
@@ -421,11 +378,7 @@ WriteBBPortUchar(
 	}
 }
 
-u8
-ReadBBPortUchar(
-	struct net_device *dev,
-	u32		addr
-	)
+u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
 {
 	/*u8	TimeoutCounter; */
 	u8	RegisterContent;
@@ -435,66 +388,62 @@ ReadBBPortUchar(
 
 	return RegisterContent;
 }
-/* {by amy 080312 */
 /*
-	Description:
-	Perform Antenna settings with antenna diversity on 87SE.
-		Created by Roger, 2008.01.25.
-*/
-bool
-SetAntennaConfig87SE(
-	struct net_device *dev,
-	u8			DefaultAnt,		/* 0: Main, 1: Aux.			*/
-	bool		bAntDiversity	/* 1:Enable, 0: Disable.	*/
-)
+ *	Description:
+ *	Perform Antenna settings with antenna diversity on 87SE.
+ *		Created by Roger, 2008.01.25.
+ */
+bool SetAntennaConfig87SE(struct net_device *dev,
+			  u8   DefaultAnt, /* 0: Main, 1: Aux. */
+			  bool bAntDiversity) /* 1:Enable, 0: Disable. */
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool   bAntennaSwitched = true;
 
 	/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
 
-	/* Threshold for antenna diversity.	*/
+	/* Threshold for antenna diversity. */
 	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
 
-	if (bAntDiversity)	{	/*	Enable Antenna Diversity.	*/
-		if (DefaultAnt == 1)	{	/* aux antenna			*/
+	if (bAntDiversity) {	/*	Enable Antenna Diversity. */
+		if (DefaultAnt == 1) {	/* aux antenna */
 
-			/* Mac register, aux antenna	*/
+			/* Mac register, aux antenna */
 			write_nic_byte(dev, ANTSEL, 0x00);
 
-			/* Config CCK RX antenna.		*/
+			/* Config CCK RX antenna. */
 			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
 			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
 
-			/* Config OFDM RX antenna.	*/
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54	*/
-			write_phy_ofdm(dev, 0x18, 0xb2);	/* Reg18 : b2		*/
-		}	else	{	/*  use main antenna	*/
-			/* Mac register, main antenna		*/
+			/* Config OFDM RX antenna. */
+			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
+			write_phy_ofdm(dev, 0x18, 0xb2);	/* Reg18 : b2 */
+		} else { /*  use main antenna */
+			/* Mac register, main antenna */
 			write_nic_byte(dev, ANTSEL, 0x03);
-			/* base band				*/
-			/*  Config CCK RX antenna.	*/
-			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b	*/
-			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7	*/
+			/* base band */
+			/*  Config CCK RX antenna. */
+			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
 
 			/* Config OFDM RX antenna. */
 			write_phy_ofdm(dev, 0x0d, 0x5c);  /* Reg0d : 5c	*/
 			write_phy_ofdm(dev, 0x18, 0xb2);  /* Reg18 : b2	*/
 		}
-	}	else	{
+	} else {
 		/* Disable Antenna Diversity. */
-		if (DefaultAnt == 1)	{	/* aux Antenna */
+		if (DefaultAnt == 1) { /* aux Antenna */
 			/* Mac register, aux antenna */
 			write_nic_byte(dev, ANTSEL, 0x00);
 
 			/* Config CCK RX antenna. */
-			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb	*/
-			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47	*/
+			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
 
 			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54	*/
-			write_phy_ofdm(dev, 0x18, 0x32);	/* Reg18 : 32	*/
-		}	else	{	/* main Antenna */
+			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
+			write_phy_ofdm(dev, 0x18, 0x32);	/* Reg18 : 32 */
+		} else { /* main Antenna */
 			/* Mac register, main antenna */
 			write_nic_byte(dev, ANTSEL, 0x03);
 
@@ -502,25 +451,22 @@ SetAntennaConfig87SE(
 			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
 			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
 
-			/* Config OFDM RX antenna.		*/
-			write_phy_ofdm(dev, 0x0D, 0x5c);	/* Reg0d : 5c	*/
-			write_phy_ofdm(dev, 0x18, 0x32);	/*Reg18 : 32	*/
+			/* Config OFDM RX antenna. */
+			write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
+			write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
 		}
 	}
 	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
 	return	bAntennaSwitched;
 }
-/* by amy 080312 */
 /*
----------------------------------------------------------------
-	*	Hardware Initialization.
-	*	the code is ported from Windows source code
-----------------------------------------------------------------*/
-
-void
-ZEBRA_Config_85BASIC_HardCode(
-	struct net_device *dev
-	)
+ *--------------------------------------------------------------
+ *		Hardware Initialization.
+ *		the code is ported from Windows source code
+ *--------------------------------------------------------------
+ */
+
+void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 {
 
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -532,163 +478,151 @@ ZEBRA_Config_85BASIC_HardCode(
 
 
 /*
-=============================================================================
-	87S_PCIE :: RADIOCFG.TXT
-=============================================================================
-*/
+ *===========================================================================
+ *	87S_PCIE :: RADIOCFG.TXT
+ *===========================================================================
+ */
 
 
 	/* Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);			mdelay(1); /* switch to page1 */
-	u4bRF23 = RF_ReadReg(dev, 0x08);			mdelay(1);
-	u4bRF24 = RF_ReadReg(dev, 0x09);			mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1); /* switch to page1 */
+	u4bRF23 = RF_ReadReg(dev, 0x08);	mdelay(1);
+	u4bRF24 = RF_ReadReg(dev, 0x09);	mdelay(1);
 
 	if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
 		d_cut = 1;
 		printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
 	}
 
-	/* Page0 : reg0-reg15	*/
-
-	RF_WriteReg(dev, 0x00, 0x009f);			mdelay(1);/* 1	*/
-
-	RF_WriteReg(dev, 0x01, 0x06e0);			mdelay(1);
-
-	RF_WriteReg(dev, 0x02, 0x004d);			mdelay(1);/* 2	*/
-
-	RF_WriteReg(dev, 0x03, 0x07f1);			mdelay(1);/* 3	*/
-
-	RF_WriteReg(dev, 0x04, 0x0975);			mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x0c72);			mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0ae6);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x00ca);			mdelay(1);
-	RF_WriteReg(dev, 0x08, 0x0e1c);			mdelay(1);
-	RF_WriteReg(dev, 0x09, 0x02f0);			mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x09d0);			mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x01ba);			mdelay(1);
-	RF_WriteReg(dev, 0x0c, 0x0640);			mdelay(1);
-	RF_WriteReg(dev, 0x0d, 0x08df);			mdelay(1);
-	RF_WriteReg(dev, 0x0e, 0x0020);			mdelay(1);
-	RF_WriteReg(dev, 0x0f, 0x0990);			mdelay(1);
-
+	/* Page0 : reg0-reg15 */
+
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);/* 1	*/
+	RF_WriteReg(dev, 0x01, 0x06e0);		mdelay(1);
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);/* 2	*/
+	RF_WriteReg(dev, 0x03, 0x07f1);		mdelay(1);/* 3	*/
+	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1);
+	RF_WriteReg(dev, 0x05, 0x0c72);		mdelay(1);
+	RF_WriteReg(dev, 0x06, 0x0ae6);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x00ca);		mdelay(1);
+	RF_WriteReg(dev, 0x08, 0x0e1c);		mdelay(1);
+	RF_WriteReg(dev, 0x09, 0x02f0);		mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x09d0);		mdelay(1);
+	RF_WriteReg(dev, 0x0b, 0x01ba);		mdelay(1);
+	RF_WriteReg(dev, 0x0c, 0x0640);		mdelay(1);
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
+	RF_WriteReg(dev, 0x0e, 0x0020);		mdelay(1);
+	RF_WriteReg(dev, 0x0f, 0x0990);		mdelay(1);
 
 	/*  Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);			mdelay(1);
-
-	RF_WriteReg(dev, 0x03, 0x0806);			mdelay(1);
-
-	RF_WriteReg(dev, 0x04, 0x03a7);			mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x059b);			mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0081);			mdelay(1);
-
-
-	RF_WriteReg(dev, 0x07, 0x01A0);			mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1);
+	RF_WriteReg(dev, 0x03, 0x0806);		mdelay(1);
+	RF_WriteReg(dev, 0x04, 0x03a7);		mdelay(1);
+	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
+	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
 /* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
-	RF_WriteReg(dev, 0x0a, 0x0001);			mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x0418);			mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
+	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
 
 	if (d_cut) {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0807);			mdelay(1); /* RX LO buffer */
-	}	else	{
-		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0806);			mdelay(1); /* RX LO buffer */
+		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
+		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1); /* RX LO buffer */
+	} else {
+		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
+		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1); /* RX LO buffer */
 	}
 
-	RF_WriteReg(dev, 0x0f, 0x0acc);			mdelay(1);
-
-	RF_WriteReg(dev, 0x00, 0x01d7);			mdelay(1); /* 6 */
+	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x01d7);		mdelay(1); /* 6 */
+	RF_WriteReg(dev, 0x03, 0x0e00);		mdelay(1);
+	RF_WriteReg(dev, 0x04, 0x0e50);		mdelay(1);
 
-	RF_WriteReg(dev, 0x03, 0x0e00);			mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0e50);			mdelay(1);
-	for (i = 0; i <= 36; i++)	{
-		RF_WriteReg(dev, 0x01, i);                     mdelay(1);
+	for (i = 0; i <= 36; i++) {
+		RF_WriteReg(dev, 0x01, i);		mdelay(1);
 		RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
 	}
 
-	RF_WriteReg(dev, 0x05, 0x0203);			mdelay(1);	/* 203, 343	*/
-	RF_WriteReg(dev, 0x06, 0x0200);			mdelay(1);	/* 400		*/
+	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
+	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x00, 0x0137);			mdelay(1);	/* switch to reg16-reg30, and HSSI disable 137	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd */
+	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);	/* Z4 synthesizer loop filter setting, 392		*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd */
+	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1); /* switch to reg0-reg15, and HSSI disable */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x00, 0x0037);			mdelay(1);	/* switch to reg0-reg15, and HSSI disable		*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1); /* CBC on, Tx Rx disable, High gain */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x04, 0x0160);			mdelay(1);	/* CBC on, Tx Rx disable, High gain				*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1); /* Z4 setted channel 1 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x07, 0x0080);			mdelay(1);	/* Z4 setted channel 1							*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
+	mdelay(200); /* Deay 200 ms. */		/* 0xfd	*/
+	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
+	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x02, 0x088D);			mdelay(1);	/* LC calibration								*/
-	mdelay(200);	/* Deay 200 ms.	*/	/* 0xfd	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x00, 0x0137);			mdelay(1);	/* switch to reg16-reg30 137, and HSSI disable 137	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x07, 0x0000);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0180);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0220);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x03E0);			mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0180);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0220);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x03E0);		mdelay(1);
 
 	/* DAC calibration off 20070702	*/
-	RF_WriteReg(dev, 0x06, 0x00c1);			mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x0001);			mdelay(1);
-/* {by amy 080312 */
+	RF_WriteReg(dev, 0x06, 0x00c1);		mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
 	/* For crystal calibration, added by Roger, 2007.12.11. */
-	if (priv->bXtalCalibration)	{	/* reg 30.	*/
-	 /* enable crystal calibration.
-			RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-			(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
-			(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
-			So we should minus 4 BITs offset.		*/
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);			mdelay(1);
+	if (priv->bXtalCalibration) { /* reg 30.	*/
+	 /*
+ 	  *  enable crystal calibration.
+	  *		RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
+	  *		(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
+	  *		(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
+	  *		So we should minus 4 BITs offset. 
+	  */
+		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
 		printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-				(priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
-	}	else	{
+		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
+	} else {
 		/* using default value. Xin=6, Xout=6.	*/
-		RF_WriteReg(dev, 0x0f, 0x0acc);			mdelay(1);
+		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
 	}
-/* by amy 080312 */
 
-	RF_WriteReg(dev, 0x00, 0x00bf);			mdelay(1); /* switch to reg0-reg15, and HSSI enable	*/
-	RF_WriteReg(dev, 0x0d, 0x08df);			mdelay(1); /* Rx BB start calibration, 00c//+edward	*/
-	RF_WriteReg(dev, 0x02, 0x004d);			mdelay(1); /* temperature meter off					*/
-	RF_WriteReg(dev, 0x04, 0x0975);			mdelay(1); /* Rx mode								*/
+	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1); /* switch to reg0-reg15, and HSSI enable */
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1); /* Rx BB start calibration, 00c//+edward */
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1); /* temperature meter off */
+	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	RF_WriteReg(dev, 0x00, 0x0197);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x05, 0x05ab);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x00, 0x009f);			mdelay(1); /* Rx mode*/	/*+edward	*/
-
-	RF_WriteReg(dev, 0x01, 0x0000);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x02, 0x0000);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	/* power save parameters.	*/
+	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	/* power save parameters. */
 	u1b24E = read_nic_byte(dev, 0x24E);
 	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
 
 	/*=============================================================================
-
-	=============================================================================
-	CCKCONF.TXT
-	=============================================================================
-	*/
-	/*	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
-		CCK reg0x00[7]=1'b1 :power saving for TX (default)
-		CCK reg0x00[6]=1'b1: power saving for RX (default)
-		CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
-		CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
-		CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
-	*/
+	 *
+	 *===========================================================================
+	 * CCKCONF.TXT
+	 *===========================================================================
+	 *
+	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
+	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
+	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
+	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
+	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
+	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
+	 */
 
 	write_phy_cck(dev, 0x00, 0xc8);
 	write_phy_cck(dev, 0x06, 0x1c);
@@ -697,7 +631,7 @@ ZEBRA_Config_85BASIC_HardCode(
 	write_phy_cck(dev, 0x2f, 0x06);
 	write_phy_cck(dev, 0x01, 0x46);
 
-	/* power control	*/
+	/* power control */
 	write_nic_byte(dev, CCK_TXAGC, 0x10);
 	write_nic_byte(dev, OFDM_TXAGC, 0x1B);
 	write_nic_byte(dev, ANTSEL, 0x03);
@@ -705,14 +639,14 @@ ZEBRA_Config_85BASIC_HardCode(
 
 
 	/*
-	=============================================================================
-		AGC.txt
-	=============================================================================
-	*/
+	 *===========================================================================
+	 *	AGC.txt
+	 *===========================================================================
+	 */
 
 	write_phy_ofdm(dev, 0x00, 0x12);
 
-	for (i = 0; i < 128; i++)	{
+	for (i = 0; i < 128; i++) {
 
 		data = ZEBRA_AGC[i+1];
 		data = data << 8;
@@ -730,49 +664,43 @@ ZEBRA_Config_85BASIC_HardCode(
 	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
 
 	/*
-	=============================================================================
-
-	=============================================================================
-	OFDMCONF.TXT
-	=============================================================================
-	*/
-
-	for (i = 0; i < 60; i++)	{
+	 *===========================================================================
+	 *
+	 *===========================================================================
+	 * OFDMCONF.TXT
+	 *===========================================================================
+	 */
+
+	for (i = 0; i < 60; i++) {
 		u4bRegOffset = i;
 		u4bRegValue = OFDM_CONFIG[i];
 
 		WriteBBPortUchar(dev,
-						(0x00000080 |
-						(u4bRegOffset & 0x7f) |
-						((u4bRegValue & 0xff) << 8)));
+				(0x00000080 |
+				(u4bRegOffset & 0x7f) |
+				((u4bRegValue & 0xff) << 8)));
 	}
 
 	/*
-	=============================================================================
-	by amy for antenna
-	=============================================================================
-	*/
-/* {by amy 080312 */
+	 *===========================================================================
+	 * by amy for antenna
+	 *===========================================================================
+	 */
 	/* Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.	*/
 	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
-/* by amy 080312} */
-/* by amy for antenna */
 }
 
 
-void
-UpdateInitialGain(
-	struct net_device *dev
-	)
+void UpdateInitialGain(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
 	/* lzm add 080826 */
-	if (priv->eRFPowerState != eRfOn)	{
+	if (priv->eRFPowerState != eRfOn) {
 		/*	Don't access BB/RF under disable PLL situation.
-			RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
-			Back to the original state
-		*/
+		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
+		 *	Back to the original state
+		 */
 		priv->InitialGain = priv->InitialGainBackUp;
 		return;
 	}
@@ -826,7 +754,7 @@ UpdateInitialGain(
 		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
 		break;
 
-	default:	/* MP */
+	default: /* MP */
 		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
 		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
 		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
@@ -834,14 +762,11 @@ UpdateInitialGain(
 	}
 }
 /*
-	Description:
-		Tx Power tracking mechanism routine on 87SE.
-	Created by Roger, 2007.12.11.
-*/
-void
-InitTxPwrTracking87SE(
-	struct net_device *dev
-)
+ *	Description:
+ *		Tx Power tracking mechanism routine on 87SE.
+ *	Created by Roger, 2007.12.11.
+ */
+void InitTxPwrTracking87SE(struct net_device *dev)
 {
 	u32	u4bRfReg;
 
@@ -851,49 +776,41 @@ InitTxPwrTracking87SE(
 	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);			mdelay(1);
 }
 
-void
-PhyConfig8185(
-	struct net_device *dev
-	)
+void PhyConfig8185(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 		write_nic_dword(dev, RCR, priv->ReceiveConfig);
 	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
 	/*  RF config */
 	ZEBRA_Config_85BASIC_HardCode(dev);
-/* {by amy 080312 */
 	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */
-	if (priv->bDigMechanism)	{
+	if (priv->bDigMechanism) {
 		if (priv->InitialGain == 0)
 			priv->InitialGain = 4;
 	}
 
 	/*
-		Enable thermal meter indication to implement TxPower tracking on 87SE.
-		We initialize thermal meter here to avoid unsuccessful configuration.
-		Added by Roger, 2007.12.11.
-	*/
+	 *	Enable thermal meter indication to implement TxPower tracking on 87SE.
+	 *	We initialize thermal meter here to avoid unsuccessful configuration.
+	 *	Added by Roger, 2007.12.11.
+	 */
 	if (priv->bTxPowerTrack)
 		InitTxPwrTracking87SE(dev);
 
-/* by amy 080312} */
 	priv->InitialGainBackUp = priv->InitialGain;
 	UpdateInitialGain(dev);
 
 	return;
 }
 
-void
-HwConfigureRTL8185(
-		struct net_device *dev
-		)
+void HwConfigureRTL8185(struct net_device *dev)
 {
 	/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
-	u8		bUNIVERSAL_CONTROL_RL = 0;
-	u8		bUNIVERSAL_CONTROL_AGC = 1;
-	u8		bUNIVERSAL_CONTROL_ANT = 1;
-	u8		bAUTO_RATE_FALLBACK_CTL = 1;
-	u8		val8;
+	u8 bUNIVERSAL_CONTROL_RL = 0;
+	u8 bUNIVERSAL_CONTROL_AGC = 1;
+	u8 bUNIVERSAL_CONTROL_ANT = 1;
+	u8 bAUTO_RATE_FALLBACK_CTL = 1;
+	u8 val8;
 	write_nic_word(dev, BRSR, 0x0fff);
 	/* Retry limit */
 	val8 = read_nic_byte(dev, CW_CONF);
@@ -907,24 +824,24 @@ HwConfigureRTL8185(
 
 	/* Tx AGC */
 	val8 = read_nic_byte(dev, TXAGC_CTL);
-	if (bUNIVERSAL_CONTROL_AGC)	{
+	if (bUNIVERSAL_CONTROL_AGC) {
 		write_nic_byte(dev, CCK_TXAGC, 128);
 		write_nic_byte(dev, OFDM_TXAGC, 128);
 		val8 = val8 & 0xfe;
-	}	else	{
+	} else {
 		val8 = val8 | 0x01 ;
 	}
 
 
 	write_nic_byte(dev, TXAGC_CTL, val8);
 
-	/* Tx Antenna including Feedback control	*/
+	/* Tx Antenna including Feedback control */
 	val8 = read_nic_byte(dev, TXAGC_CTL);
 
-	if (bUNIVERSAL_CONTROL_ANT)	{
+	if (bUNIVERSAL_CONTROL_ANT) {
 		write_nic_byte(dev, ANTSEL, 0x00);
 		val8 = val8 & 0xfd;
-	}	else	{
+	} else {
 		val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
 	}
 
@@ -933,7 +850,7 @@ HwConfigureRTL8185(
 	/* Auto Rate fallback control	*/
 	val8 = read_nic_byte(dev, RATE_FALLBACK);
 	val8 &= 0x7c;
-	if (bAUTO_RATE_FALLBACK_CTL)	{
+	if (bAUTO_RATE_FALLBACK_CTL) {
 		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
 
 		/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
@@ -942,40 +859,34 @@ HwConfigureRTL8185(
 	write_nic_byte(dev, RATE_FALLBACK, val8);
 }
 
-static void
-MacConfig_85BASIC_HardCode(
-	struct net_device *dev)
+static void MacConfig_85BASIC_HardCode(struct net_device *dev)
 {
 	/*
-	============================================================================
-	MACREG.TXT
-	============================================================================
-	*/
-	int			nLinesRead = 0;
-
-	u32	u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
-	int	i;
+	 *==========================================================================
+	 * MACREG.TXT
+	 *==========================================================================
+	 */
+	int nLinesRead = 0;
+	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
+	int i;
 
 	nLinesRead = sizeof(MAC_REG_TABLE)/2;
 
-	for (i = 0; i < nLinesRead; i++)	{	/* nLinesRead=101 */
+	for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
 		u4bRegOffset = MAC_REG_TABLE[i][0];
 		u4bRegValue = MAC_REG_TABLE[i][1];
 
 				if (u4bRegOffset == 0x5e)
 					u4bPageIndex = u4bRegValue;
-
 				else
-						u4bRegOffset |= (u4bPageIndex << 8);
+					u4bRegOffset |= (u4bPageIndex << 8);
 
 		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
 	}
 	/* ============================================================================ */
 }
 
-static void
-MacConfig_85BASIC(
-	struct net_device *dev)
+static void MacConfig_85BASIC(struct net_device *dev)
 {
 
 	u8			u1DA;
@@ -994,18 +905,18 @@ MacConfig_85BASIC(
 	PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
 	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
 
-	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.	*/
-	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow.	*/
+	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
+	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
 
 	/* Enable DA10 TX power saving */
 	u1DA = read_nic_byte(dev, PHYPR);
 	write_nic_byte(dev, PHYPR, (u1DA | BIT2));
 
-	/* POWER:	*/
+	/* POWER: */
 	write_nic_word(dev, 0x360, 0x1000);
 	write_nic_word(dev, 0x362, 0x1000);
 
-	/* AFE.		*/
+	/* AFE. */
 	write_nic_word(dev, 0x370, 0x0560);
 	write_nic_word(dev, 0x372, 0x0560);
 	write_nic_word(dev, 0x374, 0x0DA4);
@@ -1013,54 +924,48 @@ MacConfig_85BASIC(
 	write_nic_word(dev, 0x378, 0x0560);
 	write_nic_word(dev, 0x37A, 0x0560);
 	write_nic_word(dev, 0x37C, 0x00EC);
-	write_nic_word(dev, 0x37E, 0x00EC);	/*+edward	*/
+	write_nic_word(dev, 0x37E, 0x00EC); /* +edward */
 	write_nic_byte(dev, 0x24E, 0x01);
 }
 
-u8
-GetSupportedWirelessMode8185(
-	struct net_device *dev
-)
+u8 GetSupportedWirelessMode8185(struct net_device *dev)
 {
-	u8			btSupportedWirelessMode = 0;
+	u8 btSupportedWirelessMode = 0;
 
 	btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G);
 	return btSupportedWirelessMode;
 }
 
-void
-ActUpdateChannelAccessSetting(
-	struct net_device *dev,
-	WIRELESS_MODE			WirelessMode,
-	PCHANNEL_ACCESS_SETTING	ChnlAccessSetting
-	)
+void ActUpdateChannelAccessSetting(struct net_device *dev,
+				   WIRELESS_MODE WirelessMode,
+				   PCHANNEL_ACCESS_SETTING ChnlAccessSetting)
 {
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
+	struct		r8180_priv *priv = ieee80211_priv(dev);
+	struct		ieee80211_device *ieee = priv->ieee80211;
 	AC_CODING	eACI;
 	AC_PARAM	AcParam;
-	u8	bFollowLegacySetting = 0;
-	u8   u1bAIFS;
+	u8		bFollowLegacySetting = 0;
+	u8		u1bAIFS;
 
 	/*
-		<RJ_TODO_8185B>
-		TODO: We still don't know how to set up these registers, just follow WMAC to
-		verify 8185B FPAG.
-
-		<RJ_TODO_8185B>
-		Jong said CWmin/CWmax register are not functional in 8185B,
-		so we shall fill channel access realted register into AC parameter registers,
-		even in nQBss.
-	*/
+	 *	<RJ_TODO_8185B>
+	 *	TODO: We still don't know how to set up these registers, just follow WMAC to
+	 *	verify 8185B FPAG.
+	 *
+	 *	<RJ_TODO_8185B>
+	 *	Jong said CWmin/CWmax register are not functional in 8185B,
+	 *	so we shall fill channel access realted register into AC parameter registers,
+	 *	even in nQBss.
+	 */
 	ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
-	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08.	*/
-	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko.			*/
+	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
+	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
 
 	write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
-	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer);	/* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
+	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
 
 	u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer);
 
@@ -1074,17 +979,17 @@ ActUpdateChannelAccessSetting(
 	}
 
 	/* this setting is copied from rtl8187B.  xiong-2006-11-13 */
-	if (bFollowLegacySetting)	{
+	if (bFollowLegacySetting) {
 
 		/*
-			Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
-			2005.12.01, by rcnjko.
-		*/
+		 *	Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
+		 *	2005.12.01, by rcnjko.
+		 */
 		AcParam.longData = 0;
 		AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS.	*/
 		AcParam.f.AciAifsn.f.ACM = 0;
-		AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /*	Follow 802.11 CWmin.	*/
-		AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /*	Follow 802.11 CWmax.	*/
+		AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */
+		AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */
 		AcParam.f.TXOPLimit = 0;
 
 		/* lzm reserved 080826 */
@@ -1095,7 +1000,7 @@ ActUpdateChannelAccessSetting(
 		if (ieee->iw_mode == IW_MODE_ADHOC)
 			AcParam.f.TXOPLimit = 0x0020;
 
-		for (eACI = 0; eACI < AC_MAX; eACI++)	{
+		for (eACI = 0; eACI < AC_MAX; eACI++) {
 			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
 			{
 				PAC_PARAM	pAcParam = (PAC_PARAM)(&AcParam);
@@ -1103,7 +1008,7 @@ ActUpdateChannelAccessSetting(
 				u8		u1bAIFS;
 				u32		u4bAcParam;
 
-				/*  Retrive paramters to udpate. */
+				/*  Retrieve paramters to update. */
 				eACI = pAcParam->f.AciAifsn.f.ACI;
 				u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
 				u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET)	|
@@ -1111,7 +1016,7 @@ ActUpdateChannelAccessSetting(
 						(((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET)	|
 						(((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET));
 
-				switch (eACI)	{
+				switch (eACI) {
 				case AC1_BK:
 					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
 					break;
@@ -1133,47 +1038,46 @@ ActUpdateChannelAccessSetting(
 					break;
 				}
 
-				/* Cehck ACM bit.	*/
+				/* Cehck ACM bit. */
 				/* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.	*/
 				{
 					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
 					AC_CODING	eACI = pAciAifsn->f.ACI;
 
-					/*modified Joseph				*/
-					/*for 8187B AsynIORead issue	*/
+					/*for 8187B AsynIORead issue */
 					u8	AcmCtrl = 0;
-					if (pAciAifsn->f.ACM)	{
+					if (pAciAifsn->f.ACM) {
 						/* ACM bit is 1. */
-						switch (eACI)	{
+						switch (eACI) {
 						case AC0_BE:
-							AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN);	/* or 0x21 */
+							AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
 							break;
 
 						case AC2_VI:
-							AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN);	/* or 0x42	*/
+							AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
 							break;
 
 						case AC3_VO:
-							AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN);	/* or 0x84 */
+							AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
 							break;
 
 						default:
 							DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI);
 							break;
 						}
-					}	else	{
+					} else {
 						/* ACM bit is 0. */
-						switch (eACI)	{
+						switch (eACI) {
 						case AC0_BE:
-							AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0xDE */
+							AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */
 							break;
 
 						case AC2_VI:
-							AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0xBD */
+							AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */
 							break;
 
 						case AC3_VO:
-							AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0x7B */
+							AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */
 							break;
 
 						default:
@@ -1187,53 +1091,51 @@ ActUpdateChannelAccessSetting(
 	}
 }
 
-void
-ActSetWirelessMode8185(
-	struct net_device *dev,
-	u8				btWirelessMode
-	)
+void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
+	struct  r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	struct  ieee80211_device *ieee = priv->ieee80211;
 	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 
 	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko.	*/
+		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
 		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
 			btWirelessMode, btSupportedWirelessMode);
 		return;
 	}
 
-	/* 1. Assign wireless mode to swtich if necessary.	*/
-	if (btWirelessMode == WIRELESS_MODE_AUTO)	{
-		if ((btSupportedWirelessMode & WIRELESS_MODE_A))	{
+	/* 1. Assign wireless mode to switch if necessary. */
+	if (btWirelessMode == WIRELESS_MODE_AUTO) {
+		if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
 			btWirelessMode = WIRELESS_MODE_A;
-		}	else if (btSupportedWirelessMode & WIRELESS_MODE_G)	{
+		} else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
 				btWirelessMode = WIRELESS_MODE_G;
 
-		}	else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
-				btWirelessMode = WIRELESS_MODE_B;
-		}	else	{
-				DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
-						btSupportedWirelessMode);
+		} else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
 				btWirelessMode = WIRELESS_MODE_B;
+		} else {
+			DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
+			       btSupportedWirelessMode);
+			btWirelessMode = WIRELESS_MODE_B;
 		}
 	}
 
-	/* 2. Swtich band: RF or BB specific actions,
+	/* 
+ 	 * 2. Swtich band: RF or BB specific actions,
 	 * for example, refresh tables in omc8255, or change initial gain if necessary.
 	 * Nothing to do for Zebra to switch band.
-	 * Update current wireless mode if we swtich to specified band successfully. */
+	 * Update current wireless mode if we switch to specified band successfully. 
+	 */
 
 	ieee->mode = (WIRELESS_MODE)btWirelessMode;
 
-	/* 3. Change related setting.	*/
-	if( ieee->mode == WIRELESS_MODE_A )	{
+	/* 3. Change related setting. */
+	if( ieee->mode == WIRELESS_MODE_A ) {
 		DMESG("WIRELESS_MODE_A\n");
-	}	else if( ieee->mode == WIRELESS_MODE_B )	{
-			DMESG("WIRELESS_MODE_B\n");
-	}	else if( ieee->mode == WIRELESS_MODE_G )	{
-			DMESG("WIRELESS_MODE_G\n");
+	} else if( ieee->mode == WIRELESS_MODE_B ) {
+		DMESG("WIRELESS_MODE_B\n");
+	} else if( ieee->mode == WIRELESS_MODE_G ) {
+		DMESG("WIRELESS_MODE_G\n");
 	}
 	ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
 }
@@ -1245,22 +1147,16 @@ void rtl8185b_irq_enable(struct net_device *dev)
 	priv->irq_enabled = 1;
 	write_nic_dword(dev, IMR, priv->IntrMask);
 }
-/* by amy for power save */
-void
-DrvIFIndicateDisassociation(
-	struct net_device *dev,
-	u16			reason
-	)
+
+void DrvIFIndicateDisassociation(struct net_device *dev, u16 reason)
 {
 		/* nothing is needed after disassociation request. */
-	}
-void
-MgntDisconnectIBSS(
-	struct net_device *dev
-)
+}
+
+void MgntDisconnectIBSS(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8			i;
+	u8 i;
 
 	DrvIFIndicateDisassociation(dev, unspec_reason);
 
@@ -1271,166 +1167,143 @@ MgntDisconnectIBSS(
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 	/*
-		Stop Beacon.
-
-		Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
-		Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
-		Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
-
-		Disable Beacon Queue Own bit, suggested by jong	*/
+	 *	Stop Beacon.
+	 *
+	 *	Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
+	 *	Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
+	 *	Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
+	 *
+	 *	Disable Beacon Queue Own bit, suggested by jong	
+	 */
 	ieee80211_stop_send_beacons(priv->ieee80211);
 
 	priv->ieee80211->link_change(dev);
 	notify_wx_assoc_event(priv->ieee80211);
 }
-void
-MlmeDisassociateRequest(
-	struct net_device *dev,
-	u8 *asSta,
-	u8	asRsn
-	)
+
+void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
 
 	SendDisassociation(priv->ieee80211, asSta, asRsn);
 
-	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0)	{
-		/*ShuChen TODO: change media status.			*/
-		/*ShuChen TODO: What to do when disassociate.	*/
+	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
+		/* ShuChen TODO: change media status. */
+		/* ShuChen TODO: What to do when disassociate. */
 		DrvIFIndicateDisassociation(dev, unspec_reason);
 
-
-
 		for (i = 0; i < 6; i++)
 			priv->ieee80211->current_network.bssid[i] = 0x22;
 
 		ieee80211_disassociate(priv->ieee80211);
 	}
-
 }
 
-void
-MgntDisconnectAP(
-	struct net_device *dev,
-	u8			asRsn
-)
+void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
 	/*
-	Commented out by rcnjko, 2005.01.27:
-	I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
-
-		2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
-
-		In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
-		2004.10.11, by rcnjko. */
+	 * Commented out by rcnjko, 2005.01.27:
+	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
+	 *
+	 *	2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
+	 *
+	 *	In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
+	 *	2004.10.11, by rcnjko. 
+	 */
 	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn);
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 }
-bool
-MgntDisconnect(
-	struct net_device *dev,
-	u8			asRsn
-)
+
+bool MgntDisconnect(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-		Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
-	*/
+	 *	Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
+	 */
 
 	if (IS_DOT11D_ENABLE(priv->ieee80211))
 		Dot11d_Reset(priv->ieee80211);
-	/* In adhoc mode, update beacon frame.	*/
+	/* In adhoc mode, update beacon frame. */
 	if (priv->ieee80211->state == IEEE80211_LINKED)	{
 		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
 			MgntDisconnectIBSS(dev);
 
-		if (priv->ieee80211->iw_mode == IW_MODE_INFRA)	{
-			/*	We clear key here instead of MgntDisconnectAP() because that
-				MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
-				e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
-				used to handle disassociation related things to AP, e.g. send Disassoc
-				frame to AP.  2005.01.27, by rcnjko.	*/
+		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
+			/*
+ 			 * 	We clear key here instead of MgntDisconnectAP() because that
+			 *	MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
+			 *	e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
+			 *	used to handle disassociation related things to AP, e.g. send Disassoc
+			 *	frame to AP.  2005.01.27, by rcnjko. 
+			 */
 			MgntDisconnectAP(dev, asRsn);
 		}
-		/* Inidicate Disconnect, 2005.02.23, by rcnjko.	*/
+		/* Indicate Disconnect, 2005.02.23, by rcnjko.	*/
 	}
 	return true;
 }
 /*
-	Description:
-		Chang RF Power State.
-		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
-
-	Assumption:
-		PASSIVE LEVEL.
-*/
-bool
-SetRFPowerState(
-	struct net_device *dev,
-	RT_RF_POWER_STATE	eRFPowerState
-	)
+ *	Description:
+ *		Chang RF Power State.
+ *		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
+ *
+ *	Assumption:
+ *		PASSIVE LEVEL.
+ */
+bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool			bResult = false;
+	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool	bResult = false;
 
 	if (eRFPowerState == priv->eRFPowerState)
 		return bResult;
 
-	 bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
+	bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
 
 	return bResult;
 }
-void
-HalEnableRx8185Dummy(
-	struct net_device *dev
-	)
+
+void HalEnableRx8185Dummy(struct net_device *dev)
 {
 }
-void
-HalDisableRx8185Dummy(
-	struct net_device *dev
-	)
+
+void HalDisableRx8185Dummy(struct net_device *dev)
 {
 }
 
-bool
-MgntActSet_RF_State(
-	struct net_device *dev,
-	RT_RF_POWER_STATE	StateToSet,
-	u32	ChangeSource
-	)
+bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool				bActionAllowed = false;
-	bool				bConnectBySSID = false;
-	RT_RF_POWER_STATE	rtState;
-	u16				RFWaitCounter = 0;
+	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool	bActionAllowed = false;
+	bool	bConnectBySSID = false;
+	RT_RF_POWER_STATE rtState;
+	u16	RFWaitCounter = 0;
 	unsigned long flag;
 	/*
-		Prevent the race condition of RF state change. By Bruce, 2007-11-28.
-		Only one thread can change the RF state at one time, and others should wait to be executed.
-	*/
-	while (true)	{
+	 *	Prevent the race condition of RF state change. By Bruce, 2007-11-28.
+	 *	Only one thread can change the RF state at one time, and others should wait to be executed.
+	 */
+	while (true) {
 		spin_lock_irqsave(&priv->rf_ps_lock, flag);
-		if (priv->RFChangeInProgress)	{
+		if (priv->RFChangeInProgress) {
 			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 			/*  Set RF after the previous action is done.	*/
-			while (priv->RFChangeInProgress)	{
+			while (priv->RFChangeInProgress) {
 				RFWaitCounter++;
 				udelay(1000); /* 1 ms	*/
 
-				/* Wait too long, return FALSE to avoid to be stuck here.	*/
-				if (RFWaitCounter > 1000)	{	/* 1sec	*/
+				/* Wait too long, return FALSE to avoid to be stuck here. */
+				if (RFWaitCounter > 1000) { /* 1sec */
 					printk("MgntActSet_RF_State(): Wait too long to set RF\n");
-					/* TODO: Reset RF state?	*/
+					/* TODO: Reset RF state? */
 					return false;
 				}
 			}
-		}	else	{
+		} else {
 			priv->RFChangeInProgress = true;
 			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 			break;
@@ -1438,12 +1311,12 @@ MgntActSet_RF_State(
 	}
 	rtState = priv->eRFPowerState;
 
-	switch (StateToSet)	{
+	switch (StateToSet) {
 	case eRfOn:
 		/*
-			Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
-			the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
-		*/
+		 *	Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
+		 *	the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
+		 */
 		priv->RfOffReason &= (~ChangeSource);
 
 		if (!priv->RfOffReason)	{
@@ -1453,25 +1326,24 @@ MgntActSet_RF_State(
 			if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest)
 				bConnectBySSID = true;
 
-		}	else
-				;
+		} else
+			;
 		break;
 
 	case eRfOff:
-		 /* 070125, rcnjko: we always keep connected in AP mode.	*/
-
-			if (priv->RfOffReason > RF_CHANGE_BY_IPS)	{
-				/*
-					060808, Annie:
-					Disconnect to current BSS when radio off. Asked by QuanTa.
-
-					Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
-					because we do NOT need to set ssid to dummy ones.
-				*/
-				MgntDisconnect(dev, disas_lv_ss);
-
-				/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI.	*/
-			}
+		 /* 070125, rcnjko: we always keep connected in AP mode. */
+
+		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
+			/*
+			 *	060808, Annie:
+			 *	Disconnect to current BSS when radio off. Asked by QuanTa.
+			 *
+			 *	Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
+			 *	because we do NOT need to set ssid to dummy ones.
+			 */
+			MgntDisconnect(dev, disas_lv_ss);
+			/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
+		}
 
 		priv->RfOffReason |= ChangeSource;
 		bActionAllowed = true;
@@ -1484,14 +1356,14 @@ MgntActSet_RF_State(
 		break;
 	}
 
-	if (bActionAllowed)	{
-				/* Config HW to the specified mode.	*/
+	if (bActionAllowed) {
+		/* Config HW to the specified mode. */
 		SetRFPowerState(dev, StateToSet);
 
 		/* Turn on RF.	*/
-		if (StateToSet == eRfOn)		{
+		if (StateToSet == eRfOn) {
 			HalEnableRx8185Dummy(dev);
-			if (bConnectBySSID)	{
+			if (bConnectBySSID) {
 				/* by amy not supported	*/
 			}
 		}
@@ -1507,69 +1379,61 @@ MgntActSet_RF_State(
 	spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 	return bActionAllowed;
 }
-void
-InactivePowerSave(
-	struct net_device *dev
-	)
+
+void InactivePowerSave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-		This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
-		is really scheduled.
-		The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
-		previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
-		blocks the IPS procedure of switching RF.
-	*/
+	 *	This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
+	 *	is really scheduled.
+	 *	The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
+	 *	previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
+	 *	blocks the IPS procedure of switching RF.
+	 */
 	priv->bSwRfProcessing = true;
 
 	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
 
 	/*
-		To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
-	*/
+	 *	To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
+	 */
 
 	priv->bSwRfProcessing = false;
 }
 
 /*
-	Description:
-		Enter the inactive power save mode. RF will be off
-*/
-void
-IPSEnter(
-	struct net_device *dev
-	)
+ *	Description:
+ *		Enter the inactive power save mode. RF will be off
+ */
+void IPSEnter(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	RT_RF_POWER_STATE rtState;
-	if (priv->bInactivePs)	{
+	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
 
 		/*
-			Do not enter IPS in the following conditions:
-			(1) RF is already OFF or Sleep
-			(2) bSwRfProcessing (indicates the IPS is still under going)
-			(3) Connectted (only disconnected can trigger IPS)
-			(4) IBSS (send Beacon)
-			(5) AP mode (send Beacon)
-		*/
+		 *	Do not enter IPS in the following conditions:
+		 *	(1) RF is already OFF or Sleep
+		 *	(2) bSwRfProcessing (indicates the IPS is still under going)
+		 *	(3) Connected (only disconnected can trigger IPS)
+		 *	(4) IBSS (send Beacon)
+		 *	(5) AP mode (send Beacon)
+		 */
 		if (rtState == eRfOn && !priv->bSwRfProcessing
-			&& (priv->ieee80211->state != IEEE80211_LINKED))	{
+			&& (priv->ieee80211->state != IEEE80211_LINKED)) {
 			priv->eInactivePowerState = eRfOff;
 			InactivePowerSave(dev);
 		}
 	}
 }
-void
-IPSLeave(
-	struct net_device *dev
-	)
+void IPSLeave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	RT_RF_POWER_STATE rtState;
-	if (priv->bInactivePs)	{
+	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
-		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS)	{
+		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
 			priv->eInactivePowerState = eRfOn;
 			InactivePowerSave(dev);
 		}
@@ -1582,8 +1446,8 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	struct ieee80211_device *ieee = priv->ieee80211;
 
 	u8 SupportedWirelessMode;
-	u8			InitWirelessMode;
-	u8			bInvalidWirelessMode = 0;
+	u8 InitWirelessMode;
+	u8 bInvalidWirelessMode = 0;
 	u8 tmpu8;
 	u8 btCR9346;
 	u8 TmpU1b;
@@ -1598,89 +1462,89 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	HwConfigureRTL8185(dev);
 	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
 	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);	/* default network type to 'No	Link'	*/
+	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
 	write_nic_word(dev, BcnItv, 100);
 	write_nic_word(dev, AtimWnd, 2);
 	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
 	write_nic_byte(dev, WPA_CONFIG, 0);
 	MacConfig_85BASIC(dev);
-	/*	Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko.	*/
-	/*	BT_DEMO_BOARD type	*/
+	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
+	/* BT_DEMO_BOARD type */
 	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
 
 	/*
-	-----------------------------------------------------------------------------
-		Set up PHY related.
-	-----------------------------------------------------------------------------
-	*/
-	/* Enable Config3.PARAM_En to revise AnaaParm.	*/
-	write_nic_byte(dev, CR9346, 0xc0);	/* enable config register write */
+	 *---------------------------------------------------------------------------
+	 *	Set up PHY related.
+	 *---------------------------------------------------------------------------
+	 */
+	/* Enable Config3.PARAM_En to revise AnaaParm. */
+	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
 	tmpu8 = read_nic_byte(dev, CONFIG3);
 	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
-	/* Turn on Analog power.	*/
-	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko.	*/
+	/* Turn on Analog power. */
+	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
 	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
 	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
 	write_nic_word(dev, ANAPARAM3, 0x0010);
 
 	write_nic_byte(dev, CONFIG3, tmpu8);
 	write_nic_byte(dev, CR9346, 0x00);
-	/* enable EEM0 and EEM1 in 9346CR			*/
+	/* enable EEM0 and EEM1 in 9346CR */
 	btCR9346 = read_nic_byte(dev, CR9346);
 	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
 
-	/* B cut use LED1 to control HW RF on/off	*/
+	/* B cut use LED1 to control HW RF on/off */
 	TmpU1b = read_nic_byte(dev, CONFIG5);
 	TmpU1b = TmpU1b & ~BIT3;
 	write_nic_byte(dev, CONFIG5, TmpU1b);
 
-	/* disable EEM0 and EEM1 in 9346CR	*/
+	/* disable EEM0 and EEM1 in 9346CR */
 	btCR9346 &= ~(0xC0);
 	write_nic_byte(dev, CR9346, btCR9346);
 
-	/* Enable Led (suggested by Jong)	*/
-	/* B-cut RF Radio on/off  5e[3]=0	*/
+	/* Enable Led (suggested by Jong) */
+	/* B-cut RF Radio on/off  5e[3]=0 */
 	btPSR = read_nic_byte(dev, PSR);
 	write_nic_byte(dev, PSR, (btPSR | BIT3));
-	/* setup initial timing for RFE.	*/
+	/* setup initial timing for RFE. */
 	write_nic_word(dev, RFPinsOutput, 0x0480);
 	SetOutputEnableOfRfPins(dev);
 	write_nic_word(dev, RFPinsSelect, 0x2488);
 
-	/* PHY config.	*/
+	/* PHY config. */
 	PhyConfig8185(dev);
 
 	/*
-		We assume RegWirelessMode has already been initialized before,
-		however, we has to validate the wireless mode here and provide a
-		reasonable initialized value if necessary. 2005.01.13, by rcnjko.
-	*/
+	 *	We assume RegWirelessMode has already been initialized before,
+	 *	however, we has to validate the wireless mode here and provide a
+	 *	reasonable initialized value if necessary. 2005.01.13, by rcnjko.
+	 */
 	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 	if ((ieee->mode != WIRELESS_MODE_B) &&
 		(ieee->mode != WIRELESS_MODE_G) &&
 		(ieee->mode != WIRELESS_MODE_A) &&
-		(ieee->mode != WIRELESS_MODE_AUTO))	{
-		/* It should be one of B, G, A, or AUTO.	*/
+		(ieee->mode != WIRELESS_MODE_AUTO)) {
+		/* It should be one of B, G, A, or AUTO. */
 		bInvalidWirelessMode = 1;
-	}	else	{
-	/* One of B, G, A, or AUTO.	*/
-		/* Check if the wireless mode is supported by RF.	*/
+	} else {
+	/* One of B, G, A, or AUTO. */
+		/* Check if the wireless mode is supported by RF. */
 		if	((ieee->mode != WIRELESS_MODE_AUTO) &&
-			(ieee->mode & SupportedWirelessMode) == 0)	{
+			(ieee->mode & SupportedWirelessMode) == 0) {
 			bInvalidWirelessMode = 1;
 		}
 	}
 
-	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO)	{
-		/* Auto or other invalid value.				*/
-		/* Assigne a wireless mode to initialize.	*/
-		if ((SupportedWirelessMode & WIRELESS_MODE_A))	{
+	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
+		/* Auto or other invalid value. */
+		/* Assigne a wireless mode to initialize. */
+		if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
 			InitWirelessMode = WIRELESS_MODE_A;
-		}	else if ((SupportedWirelessMode & WIRELESS_MODE_G))	{
+		} else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
 			InitWirelessMode = WIRELESS_MODE_G;
-		}	else if ((SupportedWirelessMode & WIRELESS_MODE_B))	{
+		} else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
 			InitWirelessMode = WIRELESS_MODE_B;
-		}	else	{
+		} else {
 			DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n",
 				 SupportedWirelessMode);
 			InitWirelessMode = WIRELESS_MODE_B;
@@ -1690,24 +1554,21 @@ void rtl8185b_adapter_start(struct net_device *dev)
 		if (bInvalidWirelessMode)
 			ieee->mode = (WIRELESS_MODE)InitWirelessMode;
 
-	}	else	{
-	/* One of B, G, A.	*/
+	} else {
+	/* One of B, G, A. */
 		InitWirelessMode = ieee->mode;
 	}
-/* by amy for power save	*/
 	priv->eRFPowerState = eRfOff;
 	priv->RfOffReason = 0;
 	{
 		MgntActSet_RF_State(dev, eRfOn, 0);
 	}
 		/*
-			If inactive power mode is enabled, disable rf while in disconnected state.
-		*/
+		 *	If inactive power mode is enabled, disable rf while in disconnected state.
+		 */
 	if (priv->bInactivePs)
 		MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
 
-/* by amy for power save	*/
-
 	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
 
 	/* ----------------------------------------------------------------------------- */
@@ -1715,7 +1576,7 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	rtl8185b_irq_enable(dev);
 
 	netif_start_queue(dev);
-	}
+}
 
 void rtl8185b_rx_enable(struct net_device *dev)
 {
@@ -1728,7 +1589,7 @@ void rtl8185b_rx_enable(struct net_device *dev)
 		DMESG("NIC in promisc mode");
 
 	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
-	   dev->flags & IFF_PROMISC)	{
+	   dev->flags & IFF_PROMISC) {
 		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
 		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
 	}
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index f87e21101857..4602a47cdb4a 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -14,6 +14,7 @@ if RTLLIB
 config RTLLIB_CRYPTO_CCMP
 	tristate "Support for rtllib CCMP crypto"
 	depends on RTLLIB
+	select CRYPTO_AES
 	default y
 	---help---
 	  CCMP crypto driver for rtllib.
@@ -23,6 +24,8 @@ config RTLLIB_CRYPTO_CCMP
 config RTLLIB_CRYPTO_TKIP
 	tristate "Support for rtllib TKIP crypto"
 	depends on RTLLIB
+	select CRYPTO_ARC4
+	select CRYPTO_MICHAEL_MIC
 	default y
 	---help---
 	  TKIP crypto driver for rtllib.
@@ -31,6 +34,7 @@ config RTLLIB_CRYPTO_TKIP
 
 config RTLLIB_CRYPTO_WEP
 	tristate "Support for rtllib WEP crypto"
+	select CRYPTO_ARC4
 	depends on RTLLIB
 	default y
 	---help---
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
index 58d044ea5524..ea91744f7ccf 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
@@ -342,7 +342,6 @@ static	void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
 u32 cmpk_message_handle_rx(struct net_device *dev,
 			   struct rtllib_rx_stats *pstats)
 {
-	struct r8192_priv *priv = rtllib_priv(dev);
 	int			total_length;
 	u8			cmd_length, exe_cnt = 0;
 	u8			element_id;
@@ -409,8 +408,6 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
 			return 1;
 		}
 
-		priv->stats.rxcmdpkt[element_id]++;
-
 		total_length -= cmd_length;
 		pcmd_buff    += cmd_length;
 	}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
index 37719859bdae..b526fa428679 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
@@ -216,7 +216,7 @@ static bool firmware_check_ready(struct net_device *dev,
 		break;
 	default:
 		rt_status = false;
-		RT_TRACE(COMP_FIRMWARE, "Unknown firware status");
+		RT_TRACE(COMP_FIRMWARE, "Unknown firmware status");
 		break;
 	}
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
index 3e705efaaf22..9676c591c859 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
@@ -689,7 +689,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
 	case RF_8258:
 		break;
 	default:
-		RT_TRACE(COMP_ERR, "unknown rf chip in funtion %s()\n",
+		RT_TRACE(COMP_ERR, "unknown rf chip in function %s()\n",
 			 __func__);
 		break;
 	}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
index d5de279f6644..970298b07af7 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
@@ -306,7 +306,7 @@
 #define bRFStart                  	0x0000f000
 #define bBBStart                  	0x000000f0
 #define bBBCCKStart               	0x0000000f
-/* Reg)x814 */
+/* Reg x814 */
 #define bPAEnd                    	0xf
 #define bTREnd                    	0x0f000000
 #define bRFEnd                    	0x000f0000
@@ -844,7 +844,7 @@
 #define bRTL8258_RxLPFBW          0xc00
 #define bRTL8258_RSSILPFBW        0xc0
 
-/* byte endable for sb_write */
+/* byte enable for sb_write */
 #define bByte0                    0x1
 #define bByte1                    0x2
 #define bByte2                    0x4
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 71adb6b3344d..97a5f499d7c5 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf)
 			break;
 		}
 		RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait "
-			 "until rf chang is done.\n", __func__);
+			 "until rf change is done.\n", __func__);
 		mdelay(1);
 		RFInProgressTimeOut++;
 		spin_lock_irqsave(&priv->rf_ps_lock, flags);
@@ -1211,7 +1211,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
 	priv->AcmControl = 0;
 	priv->pFirmware = vzalloc(sizeof(struct rt_firmware));
 	if (!priv->pFirmware)
-		printk(KERN_ERR "rtl8193e: Unable to allocate space "
+		printk(KERN_ERR "rtl8192e: Unable to allocate space "
 		       "for firmware\n");
 
 	skb_queue_head_init(&priv->rx_queue);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
index 2a2519cc284d..320d5fc026b4 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
@@ -353,7 +353,6 @@ struct rt_stats {
 	unsigned long rxrdu;
 	unsigned long rxok;
 	unsigned long rxframgment;
-	unsigned long rxcmdpkt[8];
 	unsigned long rxurberr;
 	unsigned long rxstaterr;
 	unsigned long rxdatacrcerr;
@@ -944,7 +943,7 @@ struct r8192_priv {
 	bool		bfsync_processing;
 	u32		rate_record;
 	u32		rateCountDiffRecord;
-	u32		ContiuneDiffCount;
+	u32		ContinueDiffCount;
 	bool		bswitch_fsync;
 	u8		framesync;
 	u32		framesyncC34;
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index f026b7171f62..481b1e4d4913 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
 
 				if (priv->bResetInProgress) {
 					RT_TRACE(COMP_POWER_TRACKING,
-						 "we are in slient reset progress, so return\n");
+						 "we are in silent reset progress, so return\n");
 					write_nic_byte(dev, Pw_Track_Flag, 0);
 					write_nic_byte(dev, FW_Busy_Flag, 0);
 					return;
@@ -2615,22 +2615,22 @@ void dm_fsync_timer_callback(unsigned long data)
 				      rate_count_diff;
 			if (DiffNum >=
 			    priv->rtllib->fsync_seconddiff_ratethreshold)
-				priv->ContiuneDiffCount++;
+				priv->ContinueDiffCount++;
 			else
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 
-			if (priv->ContiuneDiffCount >= 2) {
+			if (priv->ContinueDiffCount >= 2) {
 				bSwitchFromCountDiff = true;
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 			}
 		} else {
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 
 		if (rate_count_diff <=
 		    priv->rtllib->fsync_firstdiff_ratethreshold) {
 			bSwitchFromCountDiff = true;
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 		priv->rate_record = rate_count;
 		priv->rateCountDiffRecord = rate_count_diff;
@@ -2677,10 +2677,10 @@ void dm_fsync_timer_callback(unsigned long data)
 			write_nic_byte(dev, 0xC36, 0x5c);
 			write_nic_byte(dev, 0xC3e, 0x96);
 		}
-		priv->ContiuneDiffCount = 0;
+		priv->ContinueDiffCount = 0;
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 	}
-	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
+	RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d "
 		 "bSwitchFsync %d\n", priv->rate_record, rate_count,
 		 rate_count_diff, priv->bswitch_fsync);
@@ -2723,7 +2723,7 @@ static void dm_EndSWFsync(struct net_device *dev)
 		write_nic_byte(dev, 0xC3e, 0x96);
 	}
 
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 }
 
@@ -2735,7 +2735,7 @@ static void dm_StartSWFsync(struct net_device *dev)
 
 	RT_TRACE(COMP_HALDM, "%s\n", __func__);
 	priv->rate_record = 0;
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 	priv->rateCountDiffRecord = 0;
 	priv->bswitch_fsync  = false;
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
index 4e93669210af..778d7baf8e08 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
@@ -1322,9 +1322,9 @@ static struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def  r8192_wx_handlers_def = {
 	.standard = r8192_wx_handlers,
-	.num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8192_wx_handlers),
 	.private = r8192_private_handler,
-	.num_private = sizeof(r8192_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8192_private_handler),
 	.num_private_args = sizeof(r8192_private_args) /
 			    sizeof(struct iw_priv_args),
 	.get_wireless_stats = r8192_get_wireless_stats,
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index e26aec86a5c8..d7460ae3a765 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -169,7 +169,7 @@ struct cb_desc {
 
 	u8 nStuckCount;
 
-	/* Tx Firmware Relaged flags (10-11)*/
+	/* Tx Firmware Related flags (10-11)*/
 	u8 bCTSEnable:1;
 	u8 bRTSEnable:1;
 	u8 bUseShortGI:1;
@@ -1690,7 +1690,7 @@ enum rtllib_state {
 	/* the association procedure is sending AUTH request*/
 	RTLLIB_ASSOCIATING_AUTHENTICATING,
 
-	/* the association procedure has successfully authentcated
+	/* the association procedure has successfully authenticated
 	 * and is sending association request
 	 */
 	RTLLIB_ASSOCIATING_AUTHENTICATED,
@@ -2409,7 +2409,7 @@ struct rtllib_device {
 
 	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
 	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
 	 * then also management frames are sent via this callback.
 	 * This function can't sleep.
 	 */
@@ -2422,12 +2422,12 @@ struct rtllib_device {
 	 */
 	void (*data_hard_stop)(struct net_device *dev);
 
-	/* OK this is complementar to data_poll_hard_stop */
+	/* OK this is complementing to data_poll_hard_stop */
 	void (*data_hard_resume)(struct net_device *dev);
 
 	/* ask to the driver to retune the radio .
 	 * This function can sleep. the driver should ensure
-	 * the radio has been swithced before return.
+	 * the radio has been switched before return.
 	 */
 	void (*set_chan)(struct net_device *dev, short ch);
 
@@ -2438,7 +2438,7 @@ struct rtllib_device {
 	 * The syncro version is similar to the start_scan but
 	 * does not return until all channels has been scanned.
 	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * it is called in a work_queue when switching to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
 	 * the fucntion stop_scan should stop both the syncro and
@@ -2481,7 +2481,7 @@ struct rtllib_device {
 				     struct rtllib_network *network);
 
 
-	/* check whether Tx hw resouce available */
+	/* check whether Tx hw resource available */
 	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
 	short (*get_nic_desc_num)(struct net_device *dev, int queue_index);
 	void (*SetBWModeHandler)(struct net_device *dev,
@@ -2543,10 +2543,10 @@ struct rtllib_device {
 /* Generate probe requests */
 #define IEEE_SOFTMAC_PROBERQ (1<<4)
 
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
 #define IEEE_SOFTMAC_PROBERS (1<<5)
 
-/* The ieee802.11 stack will manages the netif queue
+/* The ieee802.11 stack will manage the netif queue
  * wake/stop for the driver, taking care of 802.11
  * fragmentation. See softmac.c for details. */
 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 13979b5ea32a..40a59c998efe 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx
 				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
 			}
 
-			/* Indicat the packets to upper layer */
+			/* Indicate the packets to upper layer */
 			if (sub_skb) {
 				stats->rx_packets++;
 				stats->rx_bytes += sub_skb->len;
@@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee,
 			if (is_multicast_ether_addr(dst))
 				ieee->stats.multicast++;
 
-			/* Indicat the packets to upper layer */
+			/* Indicate the packets to upper layer */
 			memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
 			sub_skb->protocol = eth_type_trans(sub_skb, dev);
 			sub_skb->dev = dev;
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index c5a15dba1bf5..a21b4d91a596 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net)
 	return net->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME;
 }
 
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
  * tag and the EXTENDED RATE MFIE tag if needed.
  * It encludes two bytes per tag for the tag itself and its len
  */
@@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee)
 	return rate_len;
 }
 
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) pointed.
  * Then it updates the pointer so that
  * it points after the new MFIE tag added.
  */
@@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
 		 *    new network events, despite for updating the net list,
 		 *    but we are temporarly 'unlinked' as the driver shall
 		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
+		 * So the only situation in which are interested is to check
 		 * if the state become LINKED because of the #1 situation
 		 */
 
@@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee,
 
 		/* if the user set the AP check if match.
 		 * if the network does not broadcast essid we check the
-		 *	 user supplyed ANY essid
+		 *	 user supplied ANY essid
 		 * if the network does broadcast and the user does not set
 		 *	 essid it is OK
 		 * if the network does broadcast and the user did set essid
@@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee,
 
 /* following are for a simplier TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
+ * will use these two functions (plus a reset one), that
+ * will internally use the kernel netif_* and takes
  * care of the ieee802.11 fragmentation.
  * So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enought room to TX an entire packet.
- * This might be useful if each fragment need it's own
+ * call the stop function when it wants to not
+ * have enough room to TX an entire packet.
+ * This might be useful if each fragment needs it's own
  * descriptor, thus just keep a total free memory > than
- * the max fragmentation treshold is not enought.. If the
- * ieee802.11 stack passed a TXB struct then you needed
+ * the max fragmentation threshold is not enough.. If the
+ * ieee802.11 stack passed a TXB struct then you need
  * to keep N free descriptors where
  * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
  * In this way you need just one and the 802.11 stack
@@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data)
 	rtllib_softmac_check_all_nets(ieee);
 
 
-	/* if not then the state is not linked. Maybe the user swithced to
+	/* if not then the state is not linked. Maybe the user switched to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
 	 * time to scan all the chans..) or we have just run up the iface
 	 * after setting ad-hoc mode. So we have to give another try..
 	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tryed to associate when
+	 * (in bss mode we had to make sure no-one tried to associate when
 	 * we had just checked the ieee->state and we was going to start the
-	 * scan) beacause in ibss mode the rtllib_new_net function, when
+	 * scan) because in ibss mode the rtllib_new_net function, when
 	 * finds a good net, just set the ieee->state to RTLLIB_LINKED,
 	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
 	 * scan, that will stop at the first round because it sees the state
@@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee)
 
 	/* ensure no-one start an associating process (thus setting
 	 * the ieee->state to rtllib_ASSOCIATING) while we
-	 * have just cheked it and we are going to enable scan.
+	 * have just checked it and we are going to enable scan.
 	 * The rtllib_new_net function is always called with
 	 * lock held (from both rtllib_softmac_check_all_nets and
 	 * the rx path), so we cannot be in the middle of such function
@@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data)
 
 	/* until we do not set the state to RTLLIB_NOLINK
 	* there are no possibility to have someone else trying
-	* to start an association procdure (we get here with
+	* to start an association procedure (we get here with
 	* ieee->state = RTLLIB_ASSOCIATING).
 	* When we set the state to RTLLIB_NOLINK it is possible
 	* that the RX path run an attempt to associate, but
@@ -3679,8 +3679,7 @@ void rtllib_MlmeDisassociateRequest(struct rtllib_device *rtllib, u8 *asSta,
 
 	RemovePeerTS(rtllib, asSta);
 
-
-	if (memcpy(rtllib->current_network.bssid, asSta, 6) == NULL) {
+	if (memcmp(rtllib->current_network.bssid, asSta, 6) == 0) {
 		rtllib->state = RTLLIB_NOLINK;
 
 		for (i = 0; i < 6; i++)
diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
index 1523bc7a2105..1bb6b52e0f24 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
@@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee,
 
 
 	/* this is just to be sure that the GET wx callback
-	 * has consisten infos. not needed otherwise
+	 * has consistent infos. not needed otherwise
 	 */
 	spin_lock_irqsave(&ieee->lock, flags);
 
@@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee,
 	if ((!ieee->sta_wake_up) ||
 	    (!ieee->enter_sleep_state) ||
 	    (!ieee->ps_is_queue_empty)) {
-		RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use "
+		RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use "
 			     "but driver missed a callback\n\n", __func__);
 		return -1;
 	}
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index f451bfc27a86..f24aa00c533d 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -59,7 +59,7 @@
 802.11 Data Frame
 
 
-802.11 frame_contorl for data frames - 2 bytes
+802.11 frame_control for data frames - 2 bytes
      ,-----------------------------------------------------------------------------------------.
 bits | 0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  a  |  b  |  c  |  d  |  e   |
      |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
@@ -576,7 +576,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&ieee->lock, flags);
 
-	/* If there is no driver handler to take the TXB, dont' bother
+	/* If there is no driver handler to take the TXB, don't bother
 	 * creating it... */
 	if ((!ieee->hard_start_xmit && !(ieee->softmac_features &
 	   IEEE_SOFTMAC_TX_QUEUE)) ||
@@ -738,7 +738,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
 		   (CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS))
 			bytes_per_frag -= RTLLIB_FCS_LEN;
 
-		/* Each fragment may need to have room for encryptiong
+		/* Each fragment may need to have room for encrypting
 		 * pre/postfix */
 		if (encrypt) {
 			bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index c27ff7edbaf2..c7e8d4d8ec2b 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -88,7 +88,7 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,
 	}
 	/* Add the protocol name */
 	iwe.cmd = SIOCGIWNAME;
-	for (i = 0; i < (sizeof(rtllib_modes)/sizeof(rtllib_modes[0])); i++) {
+	for (i = 0; i < ARRAY_SIZE(rtllib_modes); i++) {
 		if (network->mode&(1<<i)) {
 			sprintf(pname, rtllib_modes[i].mode_string,
 				rtllib_modes[i].mode_size);
@@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
 				       (*crypt)->priv);
 		sec.flags |= (1 << key);
 		/* This ensures a key will be activated if no key is
-		 * explicitely set */
+		 * explicitly set */
 		if (key == sec.active_key)
 			sec.flags |= SEC_ACTIVE_KEY;
 		ieee->crypt_info.tx_keyidx = key;
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
index e3d47bcf4cab..82d4bf6a86a5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -161,7 +161,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 	if (ieee->pHTInfo == NULL)
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n");
-		return NULL;
+		goto failed;
 	}
 	HTUpdateDefaultSetting(ieee);
 	HTInitializeHTInfo(ieee); //may move to other place.
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index be2a28cf8edd..6249c3f160ec 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -671,7 +671,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee,
 		index = 1;
 	} else {
 		/* Current packet is going to be inserted into pending list.*/
-		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__);
+		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__FUNCTION__);
 		if(!list_empty(&ieee->RxReorder_Unused_List)) {
 			pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List);
 			list_del_init(&pReorderEntry->List);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index c2ab5fa15465..f6ff8cff313a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -2062,7 +2062,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 8878cfeb0fbb..3c515b7bc542 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -14,7 +14,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
index fb3ac9766ea5..5cea51e1142e 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.h
+++ b/drivers/staging/rtl8192u/r8180_93cx6.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thank the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /*This files contains card eeprom (93c46 or 93c56) programming routines*/
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 9b81f26d40fe..57e3383cc935 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -11,7 +11,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \
 #define COMP_INIT				BIT2		// during driver initialization / halt / reset.
 
 
-#define COMP_RECV				BIT3		// Reveive part data path.
+#define COMP_RECV				BIT3		// Receive data path.
 #define COMP_SEND				BIT4		// Send part path.
 #define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
 #define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
@@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb {
         u8		TxSubCarrier:2;         // This is used for legacy OFDM rate only.
         u8		STBC:2;
         u8		AllowAggregation:1;
-        u8		RtsHT:1;                //Interpre RtsRate field as high throughput data rate
+        u8		RtsHT:1;                //Interpret RtsRate field as high throughput data rate
         u8		RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
         u8		RtsBandwidth:1;         // This is used for HT MCS rate only.
         u8		RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
@@ -610,7 +610,6 @@ typedef struct Stats
 //	unsigned long rxnopointer;
 	unsigned long rxok;
 	unsigned long rxframgment;
-	unsigned long rxcmdpkt[4];		//08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
 	unsigned long rxurberr;
 	unsigned long rxstaterr;
 	unsigned long received_rate_histogram[4][32];	//0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
@@ -1117,7 +1116,7 @@ typedef struct r8192_priv
 	bool bfsync_processing;	// 500ms Fsync timer is active or not
 	u32 	rate_record;
 	u32 	rateCountDiffRecord;
-	u32	ContiuneDiffCount;
+	u32	ContinueDiffCount;
 	bool bswitch_fsync;
 
 	u8	framesync;
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9c00865f302a..5981d6658320 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
 		{
 			Dot11d_Init(ieee);
 			ieee->bGlobalDomain = false;
-			//acturally 8225 & 8256 rf chip only support B,G,24N mode
+			//actually 8225 & 8256 rf chips only support B,G,24N mode
 			if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
 			{
 				min_chan = 1;
@@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate)
 }
 
 
-/* The protype of rx_isr has changed since one verion of Linux Kernel */
+/* The prototype of rx_isr has changed since one version of Linux Kernel */
 static void rtl8192_rx_isr(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 	if(tcb_desc->queue_index != TXCMD_QUEUE) {
 		if(tx_urb->status == 0) {
 			dev->trans_start = jiffies;
-			// As act as station mode, destion shall be  unicast address.
+			// Act as station mode, destination shall be unicast address.
 			//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
 			//priv->ieee80211->stats.tx_packets++;
 			priv->stats.txoktotal++;
@@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 			else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
 				(!(priv->ieee80211->queue_stop))) {
 				// Tx Driver Aggregation process
-				/* The driver will aggregation the packets according to the following stets
+				/* The driver will aggregation the packets according to the following stats
 				 * 1. check whether there's tx irq available, for it's a completion return
 				 *    function, it should contain enough tx irq;
-				 * 2. check pakcet type;
+				 * 2. check packet type;
 				 * 3. initialize sendlist, check whether the to-be send packet no greater than 1
-				 * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
-				 * 5. check whehter the packet could be sent, otherwise just insert to wait head
+				 * 4. aggregates the packets, and fill firmware info and tx desc into it, etc.
+				 * 5. check whether the packet could be sent, otherwise just insert into wait head
 				 * */
 				skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
 				if(!check_nic_enough_desc(dev, queue_index)) {
@@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
 	return 0;
 }
 
-/* handle manage frame frame beacon and probe response */
+/* handle and manage frame from beacon and probe response */
 static int rtl8192_handle_beacon(struct net_device * dev,
 			      struct ieee80211_beacon * beacon,
 			      struct ieee80211_network * network)
@@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
 void rtl8192_refresh_supportrate(struct r8192_priv* priv)
 {
 	struct ieee80211_device* ieee = priv->ieee80211;
-	//we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+	//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
 	if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
 	{
 		memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
@@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->TransmitConfig =
 	//	TCR_DurProcMode |	//for RTL8185B, duration setting by HW
 	//?	TCR_DISReqQsize |
-		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
 		(priv->ShortRetryLimit<<TCR_SRL_OFFSET)|	// Short retry limit
 		(priv->LongRetryLimit<<TCR_LRL_OFFSET) |	// Long retry limit
-		(false ? TCR_SAT: 0);	// FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+		(false ? TCR_SAT: 0);	// FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
 #ifdef TO_DO_LIST
 	if(Adapter->bInHctTest)
 		pHalData->ReceiveConfig	=	pHalData->CSMethod |
@@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		{ // User disable RF via registry.
 			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
 			MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those actions will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		if(pHalData->eRFPowerState == eRfOff)
 		{
 			MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those actions will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev)
 	//unsigned long flags;
 
 	//
-	// Decide Stuch threshold according to current power save mode
+	// Decide such threshold according to current power save mode
 	//
 
 //     RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
@@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
 
 		// Driver should not check RX stuck in IBSS mode because it is required to
 		// set Check BSSID in order to send beacon, however, if check BSSID is
-		// set, STA cannot hear any packet a all. Emily, 2008.04.12
+		// set, STA cannot hear any packet at all. Emily, 2008.04.12
 		RxResetType = RxCheckStuck(dev);
 	}
 	if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
@@ -3962,7 +3962,7 @@ RESET_START:
 		up(&priv->wx_sem);
 		RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
 	//rtl8192_irq_disable(dev);
-		RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+		RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
 		reset_status = _rtl8192_up(dev);
 
 		RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
@@ -4155,7 +4155,7 @@ extern	void	rtl819x_watchdog_wqcallback(struct work_struct *work)
 void watch_dog_timer_callback(unsigned long data)
 {
 	struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
-	//printk("===============>watch_dog  timer\n");
+	//printk("===============>watch_dog timer\n");
 	queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
 	mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
 }
@@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev)
 	init_status = rtl8192_adapter_start(dev);
 	if(!init_status)
 	{
-		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
 		priv->up=priv->ieee80211->ieee_up = 0;
 		return -EAGAIN;
 	}
@@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev)
 		skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
 	}
 
-	//as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+	//as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
 //	flush_scheduled_work();
 	rtl8192_cancel_deferred_work(priv);
 	deinit_hal_dm(dev);
@@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
 
 /**
  * Function:     UpdateRxPktTimeStamp
- * Overview:     Recored down the TSF time stamp when receiving a packet
+ * Overview:     Record the TSF time stamp when receiving a packet
  *
  * Input:
  *       PADAPTER        Adapter
@@ -4556,10 +4556,10 @@ long rtl819x_translate_todbm(u8 signal_strength_index	)// 0-100 index.
 }
 
 
-/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
     be a local static. Otherwise, it may increase when we return from S3/S4. The
-    value will be kept in memory or disk. We must delcare the value in adapter
-    and it will be reinitialized when return from S3/S4. */
+    value will be kept in memory or disk. Declare the value in the adaptor
+    and it will be reinitialized when returned from S3/S4. */
 void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
 {
 	bool bcheck = false;
@@ -5091,8 +5091,8 @@ static void rtl8192_query_rxphystatus(
 			tmp_rxevm =	pofdm_buf->rxevm_X[i];
 			rx_evmX = (char)(tmp_rxevm);
 
-			// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
-			// fill most significant bit to "zero" when doing shifting operation which may change a negative
+			// Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
+			// will set the most significant bit to "zero" when doing shifting operation which may change a negative
 			// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
 			rx_evmX /= 2;	//dbm
 
@@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 	type = WLAN_FC_GET_TYPE(fc);
 	praddr = hdr->addr1;
 
-	/* Check if the received packet is acceptabe. */
+	/* Check if the received packet is acceptable. */
 	bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
 							(eqMacAddr(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
 								 && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
@@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 
 /**
 * Function:	UpdateReceivedRateHistogramStatistics
-* Overview:	Recored down the received data rate
+* Overview:	Record the received data rate
 *
 * Input:
 * 	struct net_device *dev
@@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
 	}
 
 #ifdef USB_RX_AGGREGATION_SUPPORT
-	/* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+	/* for the rx aggregated sub frame, the redundant space truly contained in the packet */
 	if(bIsRxAggrSubframe) {
 		skb_pull(skb, 8);
 	}
@@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 			PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
 		}
 #endif
-		/* Process the MPDU recevied */
+		/* Process the MPDU received */
 		skb_trim(skb, skb->len - 4/*sCrcLng*/);
 
 		rx_pkt_len = skb->len;
@@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 				if(PacketLength > agg_skb->len) {
 					break;
 				}
-				/* Process the MPDU recevied */
+				/* Process the MPDU received */
 				skb = dev_alloc_skb(PacketLength);
 				memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
 				skb_trim(skb, skb->len - 4/*sCrcLng*/);
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 2dde9fa5c21e..cd8dc85e9c0f 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 /*------------------------Define global variable-----------------------------*/
 // Debug variable ?
 dig_t	dm_digtable;
-// Store current shoftware write register content for MAC PHY.
+// Store current software write register content for MAC PHY.
 u8		dm_shadow[16][256] = {{0}};
 // For Dynamic Rx Path Selection by Signal Strength
 DRxPathSel	DM_RxPathSelTable;
@@ -119,7 +119,7 @@ static	void	dm_pd_th(struct net_device *dev);
 static	void	dm_cs_ratio(struct net_device *dev);
 
 static	void dm_init_ctstoself(struct net_device *dev);
-// DM --> EDCA turboe mode control
+// DM --> EDCA turbo mode control
 static	void	dm_check_edca_turbo(struct net_device *dev);
 
 // DM --> HW RF control
@@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
  *
  * Revised History:
  *	When		Who		Remark
- *	05/26/08	amy 	Create version 0 proting from windows code.
+ *	05/26/08	amy 	Create version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static void dm_check_rate_adaptive(struct net_device * dev)
@@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x5a400169,	// 3, +3db
 	0x50800142,	// 4, +2db
 	0x47c0011f,	// 5, +1db
-	0x40000100,	// 6, +0db ===> default, upper for higher temprature, lower for low temprature
+	0x40000100,	// 6, +0db ===> default, upper for higher temperature, lower for low temperature
 	0x390000e4,	// 7, -1db
 	0x32c000cb,	// 8, -2db
 	0x2d4000b5,	// 9, -3db
@@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 		{
 			write_nic_byte(dev, 0x1ba, 0);
 			viviflag = FALSE;
-			RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
+			RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
 			for(k = 0;k < 5; k++)
 				tmp_report[k] = 0;
 			break;
@@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
 	if(tmpRegA < 3 || tmpRegA > 13)
 		return;
-	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temprature
+	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temperature
 		tmpRegA = 12;
 	RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
 	priv->ThermalMeter[0] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 	priv->ThermalMeter[1] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 
-	//Get current RF-A temprature index
-	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temprature
+	//Get current RF-A temperature index
+	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temperature
 	{
 		tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
 		tmpCCK40Mindex = tmpCCK20Mindex - 6;
@@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	else
 	{
 		tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
-		if(tmpval >= 6)								// higher temprature
+		if(tmpval >= 6)								// higher temperature
 			tmpOFDMindex = tmpCCK20Mindex = 0;		// max to +6dB
 		else
 			tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
@@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
+	// Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire. This mechanism
 	// can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
-	// 3-wire by driver cause RF goes into wrong state.
+	// 3-wire by driver causes RF to go into a wrong state.
 	if(priv->ieee80211->FwRWRF)
 		priv->btxpower_tracking = TRUE;
 	else
@@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 
 	if(!TM_Trigger)
 	{
-		//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
+		//Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
 		//actually write reg0x02 bit1=0, then bit1=1.
 		//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
 		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
@@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
 			write_nic_dword(dev, RATR0, ratr_value);
 			write_nic_byte(dev, UFWP, 1);
 	}
-	//Resore TX Power Tracking Index
+	//Restore TX Power Tracking Index
 	if(priv->btxpower_trackingInit && priv->btxpower_tracking){
 		dm_txpower_reset_recovery(dev);
 	}
@@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev)
 	dm_digtable.dbg_mode = DM_DBG_OFF;	//off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
 	dm_digtable.dig_algorithm_switch = 0;
 
-	/* 2007/10/04 MH Define init gain threshol. */
+	/* 2007/10/04 MH Define init gain threshold. */
 	dm_digtable.dig_state		= DM_STA_DIG_MAX;
 	dm_digtable.dig_highpwr_state	= DM_STA_DIG_MAX;
 	dm_digtable.initialgain_lowerbound_state = false;
@@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 		return;
 
 	//DbgPrint("Dig by Sw Rssi \n");
-	if(dm_digtable.dig_algorithm_switch)	// if swithed algorithm, we have to disable FW Dig.
+	if(dm_digtable.dig_algorithm_switch)	// if switched algorithm, we have to disable FW Dig.
 		fw_dig = 0;
 	if(fw_dig <= 3)	// execute several times to make sure the FW Dig is disabled
 	{// FW DIG Off
@@ -2160,8 +2160,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 	/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
 	pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
 	DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
-	/* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
-		  and then execute below step. */
+	/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
+		  and then execute the step below. */
 	if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
 	{
 		/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
@@ -2220,8 +2220,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 
 	}
 
-	/* 2. When RSSI increase, We have to judge if it is larger than a treshold
-		  and then execute below step.  */
+	/* 2. When RSSI increase, We have to judge if it is larger than a threshold
+		  and then execute the step below.  */
 	if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
 	{
 		u8 reset_flag = 0;
@@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
 	}
 
 	/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
-		  it is larger than a treshold and then execute below step.  */
+		  it is larger than a threshold and then execute the step below.  */
 	// 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
 	if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
 	{
@@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
 {
 	//struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
-	// page 1 register before Lextra bus is enabled cause system fails when resuming
+	// Work around for DTM test, we will not enable HW - radio on/off because r/w
+	// page 1 register before extra bus is enabled causing system failures when resuming
 	// from S4. 20080218, Emily
 
 	// Stop to execute workitem to prevent S3/S4 bug.
@@ -3377,30 +3377,30 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		{
 
 			u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
-			// Contiune count
+			// Continue count
 			if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
-				priv->ContiuneDiffCount++;
+				priv->ContinueDiffCount++;
 			else
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 
-			// Contiune count over
-			if(priv->ContiuneDiffCount >=2)
+			// Continue count over
+			if(priv->ContinueDiffCount >=2)
 			{
 				bSwitchFromCountDiff = true;
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 			}
 		}
 		else
 		{
-			// Stop contiune count
-			priv->ContiuneDiffCount = 0;
+			// Stop the continued count
+			priv->ContinueDiffCount = 0;
 		}
 
 		//If Count diff <= FsyncRateCountThreshold
 		if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold)
 		{
 			bSwitchFromCountDiff = true;
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 		priv->rate_record = rate_count;
 		priv->rateCountDiffRecord = rate_count_diff;
@@ -3468,14 +3468,14 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		#endif
 			write_nic_byte(dev, 0xC3e, 0x96);
 		}
-		priv->ContiuneDiffCount = 0;
+		priv->ContinueDiffCount = 0;
 	#ifdef RTL8190P
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd);
 	#else
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 	#endif
 	}
-	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
+	RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
 }
 
@@ -3507,7 +3507,7 @@ static void dm_EndSWFsync(struct net_device *dev)
 		write_nic_byte(dev, 0xC3e, 0x96);
 	}
 
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 #ifndef RTL8190P
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 #endif
@@ -3523,8 +3523,8 @@ static void dm_StartSWFsync(struct net_device *dev)
 	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
 	// Initial rate record to zero, start to record.
 	priv->rate_record = 0;
-	// Initial contiune diff count to zero, start to record.
-	priv->ContiuneDiffCount = 0;
+	// Initialize continue diff count to zero, start to record.
+	priv->ContinueDiffCount = 0;
 	priv->rateCountDiffRecord = 0;
 	priv->bswitch_fsync  = false;
 
@@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev)
 
 	// If we test chariot, we should stop the TX command ?
 	// Because 92E will always silent reset when we send tx command. We use register
-	// 0x1e0(byte) to botify driver.
+	// 0x1e0(byte) to notify driver.
 	write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
 	return;
 	tx_cmd.Op		= TXCMD_SET_RX_RSSI;
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index e89aaf70143b..1bfe871dcfb2 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -10,7 +10,7 @@
 	Parts of this driver are based on the Intel Pro Wireless
 	2100 GPL driver.
 
-	We want to tanks the Authors of those projects
+	We want to thank the Authors of those projects
 	and the Ndiswrapper project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index f6408f98ede6..71f2d2349c38 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -13,7 +13,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
 	//count the length of input ssid
 	for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
 
-	//search for the correspoding info which is received
+	//search for the corresponding info which is received
 	list_for_each_entry(target, &ieee->network_list, list) {
 		if ( (target->ssid_len == name_len) &&
 		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
@@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	range->max_qual.updated = 7; /* Updated all three */
 
 	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 20 + -98;
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7; /* Updated all three */
@@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] =
 #else
 	 NULL,
 #endif
-	dummy,                     /* SIOCGIWAPLIST -- depricated */
+	dummy,                     /* SIOCGIWAPLIST -- deprecated */
 	r8192_wx_set_scan,        /* SIOCSIWSCAN */
 	r8192_wx_get_scan,        /* SIOCGIWSCAN */
 	r8192_wx_set_essid,       /* SIOCSIWESSID */
@@ -1211,9 +1211,9 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def  r8192_wx_handlers_def={
 	.standard = r8192_wx_handlers,
-	.num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8192_wx_handlers),
 	.private = r8192_private_handler,
-	.num_private = sizeof(r8192_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8192_private_handler),
 	.num_private_args = sizeof(r8192_private_args) / sizeof(struct iw_priv_args),
 #if WIRELESS_EXT >= 17
 	.get_wireless_stats = r8192_get_wireless_stats,
diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
index f4cf2801136a..9f6b10505426 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.h
+++ b/drivers/staging/rtl8192u/r8192U_wx.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thank the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 2ac421626e7c..e07f8b17a0d6 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				bEnableHT;
 	u8				bCurrentHTSupport;
 
-	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bRegBW40MHz;				// Tx 40MHz channel capability
 	u8				bCurBW40MHz;				// Tx 40MHz channel capability
 
 	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 0cb28c776c49..a8a6dc2c365f 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -157,7 +157,7 @@ SendTxCommandPacket(
 		seg_ptr = skb_put(skb, buffer_len);
 		/*
 		 * Transform from little endian to big endian
-		 * and pending  zero
+		 * and pending zero
 		 */
 		memcpy(seg_ptr,codevirtualaddress,buffer_len);
 		tcb_desc->txbuf_size= (u16)buffer_len;
@@ -697,7 +697,6 @@ cmpk_message_handle_rx(
 	struct ieee80211_rx_stats *pstats)
 {
 //	u32			debug_level = DBG_LOUD;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	int			total_length;
 	u8			cmd_length, exe_cnt = 0;
 	u8			element_id;
@@ -719,15 +718,15 @@ cmpk_message_handle_rx(
 	/* 2. Read virtual address from RFD. */
 	pcmd_buff = pstats->virtual_address;
 
-	/* 3. Read command pakcet element id and length. */
+	/* 3. Read command packet element id and length. */
 	element_id = pcmd_buff[0];
 	/*RT_TRACE(COMP_SEND, DebugLevel,
 			("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/
 
-	/* 4. Check every received command packet conent according to different
+	/* 4. Check every received command packet content according to different
 	      element type. Because FW may aggregate RX command packet to minimize
 	      transmit time between DRV and FW.*/
-	// Add a counter to prevent to locked in the loop too long
+	// Add a counter to prevent the lock in the loop from being held too long
 	while (total_length > 0 || exe_cnt++ >100)
 	{
 		/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
@@ -779,9 +778,6 @@ cmpk_message_handle_rx(
 		// 2007/01/22 MH Add to display tx statistic.
 		//cmpk_DisplayTxStatistic(pAdapter);
 
-		/* 2007/03/09 MH Collect sidderent cmd element pkt num. */
-		priv->stats.rxcmdpkt[element_id]++;
-
 		total_length -= cmd_length;
 		pcmd_buff    += cmd_length;
 	}	/* while (total_length > 0) */
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4bb5fffca5b9..b12d19079798 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev)
 
 	/*
 	 * Download boot, main, and data image for System reset.
-	 * Download data image for firmware reseta
+	 * Download data image for firmware reset
 	 */
 	for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
 		/*
-		 * Open Image file, and map file to contineous memory if open file success.
+		 * Open image file, and map file to continuous memory if open file success.
 		 * or read image file from array. Default load from IMG file
 		 */
 		if(rst_opt == OPT_SYSTEM_RESET) {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index c4586b0817d1..dd1954daea2d 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
  *	     and do register read/write
  *   input:  u32	dwBitMask  //taget bit pos in the addr to be modified
  *  output:  none
- *  return:  u32	return the shift bit bit position of the mask
+ *  return:  u32	return the shift bit position of the mask
  * ****************************************************************************/
 u32 rtl8192_CalculateBitShift(u32 dwBitMask)
 {
@@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
 	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
 
 
-	// TODO: we should not delay such a  long time. Ask help from SD3
+	// TODO: we should not delay such a long time. Ask for help from SD3
 	msleep(1);
 
 	ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
@@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
 		NewOffset = Offset;
 	}
 
-	// Put write addr in [5:0]  and write data in [31:16]
+	// Put write addr in [5:0] and write data in [31:16]
 	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
 
 	// Write Operation
@@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev)
 }
 
 /******************************************************************************
- *function:  This function do dirty work
+ *function:  This function does dirty work
  *   input:  dev
  *  output:  none
  *  return:  none
@@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
 void rtl8192_InitBBRFRegDef(struct net_device* dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-// RF Interface Sowrtware Control
+// RF Interface Software Control
 	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
 	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
 	priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
@@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
 	priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
 	priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
 
-	//Addr of LSSI. Wirte RF register by driver
+	//Addr of LSSI. Write RF register by driver
 	priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
 	priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
 	priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
@@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
 }
 
 /******************************************************************************
- *function:  This function does acturally set channel work
+ *function:  This function does actually set channel work
  *   input:  struct net_device *dev
  *   	     u8 		channel
  *  output:  none
@@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
 }
 
 /******************************************************************************
- *function:  This function scheduled actural workitem to set channel
+ *function:  This function scheduled actual work item to set channel
  *   input:  net_device dev
  *   	     u8		channel //channel to set
  *  output:  none
diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index 06b0b539e1bc..50f24dce8b16 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -443,7 +443,7 @@
 #define bCCKRxIG                  			0x7f00
 #define bCCKLNAPolarity           		0x800000
 #define bCCKRx1stGain             		0x7f0000
-#define bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRFExtend              		0x20000000 //CCK Rx inital gain polarity
 #define bCCKRxAGCSatLevel        		0x1f000000
 #define bCCKRxAGCSatCount       		0xe0
 #define bCCKRxRFSettle            		0x1f       //AGCsamp_dly
diff --git a/drivers/staging/rtl8712/osdep_service.h b/drivers/staging/rtl8712/osdep_service.h
index 9ba603310fdc..cabf7747390e 100644
--- a/drivers/staging/rtl8712/osdep_service.h
+++ b/drivers/staging/rtl8712/osdep_service.h
@@ -29,7 +29,6 @@
 #define _SUCCESS	1
 #define _FAIL		0
 
-#include <linux/version.h>
 #include <linux/spinlock.h>
 
 #include <linux/interrupt.h>
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index ef35bc29a3fa..3b23befd3645 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -43,7 +43,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/io.h>
 #include <linux/semaphore.h>
 #include <net/iw_handler.h>
@@ -2389,10 +2388,10 @@ static struct iw_statistics *r871x_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def r871x_handlers_def = {
 	.standard = r8711_handlers,
-	.num_standard = sizeof(r8711_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8711_handlers),
 	.private = r8711_private_handler,
 	.private_args = (struct iw_priv_args *)r8711_private_args,
-	.num_private = sizeof(r8711_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8711_private_handler),
 	.num_private_args = sizeof(r8711_private_args) /
 			    sizeof(struct iw_priv_args),
 	.get_wireless_stats = r871x_get_wireless_stats
diff --git a/drivers/staging/rts5139/ms.c b/drivers/staging/rts5139/ms.c
index b0e9071c8e52..02aad2d242cb 100644
--- a/drivers/staging/rts5139/ms.c
+++ b/drivers/staging/rts5139/ms.c
@@ -3864,7 +3864,7 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
 	log_blk = (u16) (start_sector >> ms_card->block_shift);
 	start_page = (u8) (start_sector & ms_card->page_off);
 
-	for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) {
+	for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; seg_no++) {
 		if (log_blk < ms_start_idx[seg_no + 1])
 			break;
 	}
@@ -4020,7 +4020,8 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
 
 		log_blk++;
 
-		for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) {
+		for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1;
+				seg_no++) {
 			if (log_blk < ms_start_idx[seg_no + 1])
 				break;
 		}
diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c
index f9a4498984cc..0bf6d95b3fab 100644
--- a/drivers/staging/rts_pstor/ms.c
+++ b/drivers/staging/rts_pstor/ms.c
@@ -4136,7 +4136,7 @@ int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip)
 #else
 	retval = ms_transfer_data(chip, MS_TM_AUTO_WRITE, PRO_WRITE_LONG_DATA,
 				2, WAIT_INT, 0, 0, buf + 4, 1024);
-	if ((retval != STATUS_SUCCESS) || check_ms_err(chip) {
+	if ((retval != STATUS_SUCCESS) || check_ms_err(chip)) {
 		rtsx_clear_ms_error(chip);
 		if (ms_card->mg_auth == 0) {
 			if ((buf[5] & 0xC0) != 0) {
diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c
index 9b2e5c99870f..54a474235f26 100644
--- a/drivers/staging/rts_pstor/rtsx_transport.c
+++ b/drivers/staging/rts_pstor/rtsx_transport.c
@@ -130,7 +130,7 @@ unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer,
 /* Store the contents of buffer into srb's transfer buffer and set the
 * SCSI residue. */
 void rtsx_stor_set_xfer_buf(unsigned char *buffer,
-       unsigned int buflen, struct scsi_cmnd *srb)
+	unsigned int buflen, struct scsi_cmnd *srb)
 {
 	unsigned int index = 0, offset = 0;
 
@@ -141,7 +141,7 @@ void rtsx_stor_set_xfer_buf(unsigned char *buffer,
 }
 
 void rtsx_stor_get_xfer_buf(unsigned char *buffer,
-       unsigned int buflen, struct scsi_cmnd *srb)
+	unsigned int buflen, struct scsi_cmnd *srb)
 {
 	unsigned int index = 0, offset = 0;
 
diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h
index fa7c0d09bfa5..9d9fc7c94a6e 100644
--- a/drivers/staging/sep/sep_driver_config.h
+++ b/drivers/staging/sep/sep_driver_config.h
@@ -68,11 +68,11 @@
 #define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE		16
 
 /* flag that signifies tah the lock is
-currently held by the proccess (struct file) */
+currently held by the process (struct file) */
 #define SEP_DRIVER_OWN_LOCK_FLAG                        1
 
 /* flag that signifies tah the lock is currently NOT
-held by the proccess (struct file) */
+held by the process (struct file) */
 #define SEP_DRIVER_DISOWN_LOCK_FLAG                     0
 
 /* indicates whether driver has mapped/unmapped shared area */
@@ -280,7 +280,7 @@ held by the proccess (struct file) */
 
 /*
  * Used to limit number of concurrent processes
- * allowed to allocte dynamic buffers in fastcall
+ * allowed to allocate dynamic buffers in fastcall
  * interface.
  */
 #define SEP_DOUBLEBUF_USERS_LIMIT		3
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index f1701bc6e312..df1d13e96fcd 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -786,7 +786,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait)
 		"[PID%d] poll: send_ct is %lx reply ct is %lx\n",
 			current->pid, sep->send_ct, sep->reply_ct);
 
-	/* Check if error occured during poll */
+	/* Check if error occurred during poll */
 	retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
 	if ((retval2 != 0x0) && (retval2 != 0x8)) {
 		dev_dbg(&sep->pdev->dev, "[PID%d] poll; poll error %x\n",
@@ -1160,7 +1160,7 @@ static int sep_lock_kernel_pages(struct sep_device *sep,
 
 	/* Put mapped kernel sg into kernel resource array */
 
-	/* Set output params acording to the in_out flag */
+	/* Set output params according to the in_out flag */
 	if (in_out_flag == SEP_DRIVER_IN_FLAG) {
 		*lli_array_ptr = lli_array;
 		dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages =
@@ -1358,7 +1358,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
 			lli_array[num_pages - 1].block_size);
 	}
 
-	/* Set output params acording to the in_out flag */
+	/* Set output params according to the in_out flag */
 	if (in_out_flag == SEP_DRIVER_IN_FLAG) {
 		*lli_array_ptr = lli_array;
 		dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages =
@@ -2038,7 +2038,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
 		/*
 		 * If this is not the last table -
-		 * then allign it to the block size
+		 * then align it to the block size
 		 */
 		if (!last_table_flag)
 			table_data_size =
@@ -3033,7 +3033,7 @@ static int sep_free_dcb_handler(struct sep_device *sep,
  * @cmd: command
  * @arg: pointer to argument structure
  *
- * Implement the ioctl methods availble on the SEP device.
+ * Implement the ioctl methods available on the SEP device.
  */
 static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
@@ -4460,7 +4460,7 @@ static int sep_pm_runtime_suspend(struct device *dev)
  * @sep_pm_runtime_resume:	resume- no communication with cpu & main memory
  * @sep_pm_runtime_suspend:	suspend- no communication with cpu & main memory
  * @sep_pci_suspend:		suspend - main memory is still ON
- * @sep_pci_resume:		resume - main meory is still ON
+ * @sep_pci_resume:		resume - main memory is still ON
  */
 static const struct dev_pm_ops sep_pm = {
 	.runtime_resume = sep_pm_runtime_resume,
diff --git a/drivers/staging/serial/68360serial.c b/drivers/staging/serial/68360serial.c
deleted file mode 100644
index daf0b1d0dc28..000000000000
--- a/drivers/staging/serial/68360serial.c
+++ /dev/null
@@ -1,2979 +0,0 @@
-/*
- *  UART driver for 68360 CPM SCC or SMC
- *  Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
- *  Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *
- * I used the serial.c driver as the framework for this driver.
- * Give credit to those guys.
- * The original code was written for the MBX860 board.  I tried to make
- * it generic, but there may be some assumptions in the structures that
- * have to be fixed later.
- * To save porting time, I did not bother to change any object names
- * that are not accessed outside of this file.
- * It still needs lots of work........When it was easy, I included code
- * to support the SCCs, but this has never been tested, nor is it complete.
- * Only the SCCs support modem control, so that is not complete either.
- *
- * This module exports the following rs232 io functions:
- *
- *	int rs_360_init(void);
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serialP.h> 
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
- 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-extern int  kgdb_output_string (const char* s, unsigned int count);
-#endif
-
-
-/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
-#include <linux/console.h>
-#include <linux/jiffies.h>
-
-/* this defines the index into rs_table for the port to use
- */
-#ifndef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	1 /* ie SMC2 - note USE_SMC2 must be defined */
-#endif
-/* #endif */
-
-#if 0
-/* SCC2 for console
- */
-#undef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	2
-#endif
-
-
-#define TX_WAKEUP	ASYNC_SHARE_IRQ
-
-static char *serial_name = "CPM UART driver";
-static char *serial_version = "0.03";
-
-static struct tty_driver *serial_driver;
-int serial_console_setup(struct console *co, char *options);
-
-/*
- * Serial driver configuration section.  Here are the various options:
- */
-#define SERIAL_PARANOIA_CHECK
-#define CONFIG_SERIAL_NOPAUSE_IO
-#define SERIAL_DO_RESTART
-
-/* Set of debugging defines */
-
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-
-#define _INLINE_ inline
-  
-#define DBG_CNT(s)
-
-/* We overload some of the items in the data structure to meet our
- * needs.  For example, the port address is the CPM parameter ram
- * offset for the SCC or SMC.  The maximum number of ports is 4 SCCs and
- * 2 SMCs.  The "hub6" field is used to indicate the channel number, with
- * a flag indicating SCC or SMC, and the number is used as an index into
- * the CPM parameter area for this device.
- * The "type" field is currently set to 0, for PORT_UNKNOWN.  It is
- * not currently used.  I should probably use it to indicate the port
- * type of SMC or SCC.
- * The SMCs do not support any modem control signals.
- */
-#define smc_scc_num	hub6
-#define NUM_IS_SCC	((int)0x00010000)
-#define PORT_NUM(P)	((P) & 0x0000ffff)
-
-
-#if defined (CONFIG_UCQUICC)
-
-volatile extern void *_periph_base;
-/* sipex transceiver
- *   mode bits for       are on pins
- *
- *    SCC2                d16..19
- *    SCC3                d20..23
- *    SCC4                d24..27
- */
-#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
-
-static uint sipex_mode_bits = 0x00000000;
-
-#endif
-
-/* There is no `serial_state' defined back here in 2.0.
- * Try to get by with serial_struct
- */
-/* #define serial_state serial_struct */
-
-/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
- * extras: */
-
-#if 0
-struct async_icount_24 {
-	__u32   cts, dsr, rng, dcd, tx, rx;
-	__u32   frame, parity, overrun, brk;
-	__u32   buf_overrun;
-} icount;
-#endif
-
-#if 0
-
-struct serial_state {
-        int     magic;
-        int     baud_base;
-        unsigned long   port;
-        int     irq;
-        int     flags;
-        int     hub6;
-        int     type;
-        int     line;
-        int     revision;       /* Chip revision (950) */
-        int     xmit_fifo_size;
-        int     custom_divisor;
-        int     count;
-        u8      *iomem_base;
-        u16     iomem_reg_shift;
-        unsigned short  close_delay;
-        unsigned short  closing_wait; /* time to wait before closing */
-        struct async_icount_24     icount; 
-        int     io_type;
-        struct async_struct *info;
-};
-#endif
-
-#define SSTATE_MAGIC 0x5302
-
-
-
-/* SMC2 is sometimes used for low performance TDM interfaces.  Define
- * this as 1 if you want SMC2 as a serial port UART managed by this driver.
- * Define this as 0 if you wish to use SMC2 for something else.
- */
-#define USE_SMC2 1
-
-#if 0
-/* Define SCC to ttySx mapping. */
-#define SCC_NUM_BASE	(USE_SMC2 + 1)	/* SCC base tty "number" */
-
-/* Define which SCC is the first one to use for a serial port.  These
- * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
- * for Ethernet, and the first available SCC for serial UART is SCC2.
- * NOTE:  IF YOU CHANGE THIS, you have to change the PROFF_xxx and
- * interrupt vectors in the table below to match.
- */
-#define SCC_IDX_BASE	1	/* table index */
-#endif
-
-
-/* Processors other than the 860 only get SMCs configured by default.
- * Either they don't have SCCs or they are allocated somewhere else.
- * Of course, there are now 860s without some SCCs, so we will need to
- * address that someday.
- * The Embedded Planet Multimedia I/O cards use TDM interfaces to the
- * stereo codec parts, and we use SMC2 to help support that.
- */
-static struct serial_state rs_table[] = {
-/*  type   line   PORT           IRQ       FLAGS  smc_scc_num (F.K.A. hub6) */
-	{  0,     0, PRSLOT_SMC1, CPMVEC_SMC1,   0,    0 }    /* SMC1 ttyS0 */
-#if USE_SMC2
-	,{ 0,     0, PRSLOT_SMC2, CPMVEC_SMC2,   0,    1 }     /* SMC2 ttyS1 */
-#endif
-
-#if defined(CONFIG_SERIAL_68360_SCC)
-	,{ 0,     0, PRSLOT_SCC2, CPMVEC_SCC2,   0, (NUM_IS_SCC | 1) }    /* SCC2 ttyS2 */
-	,{ 0,     0, PRSLOT_SCC3, CPMVEC_SCC3,   0, (NUM_IS_SCC | 2) }    /* SCC3 ttyS3 */
-	,{ 0,     0, PRSLOT_SCC4, CPMVEC_SCC4,   0, (NUM_IS_SCC | 3) }    /* SCC4 ttyS4 */
-#endif
-};
-
-#define NR_PORTS	(sizeof(rs_table)/sizeof(struct serial_state))
-
-/* The number of buffer descriptors and their sizes.
- */
-#define RX_NUM_FIFO	4
-#define RX_BUF_SIZE	32
-#define TX_NUM_FIFO	4
-#define TX_BUF_SIZE	32
-
-#define CONSOLE_NUM_FIFO 2
-#define CONSOLE_BUF_SIZE 4
-
-char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
-
-/* The async_struct in serial.h does not really give us what we
- * need, so define our own here.
- */
-typedef struct serial_info {
-	int			magic;
-	int			flags;
-
-	struct serial_state	*state;
- 	/* struct serial_struct	*state; */
- 	/* struct async_struct	*state; */
-	
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			line;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			blocked_open; /* # of blocked opens */
-	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
- 	wait_queue_head_t	open_wait; 
- 	wait_queue_head_t	close_wait; 
-
-	
-/* CPM Buffer Descriptor pointers.
-	*/
-	QUICC_BD			*rx_bd_base;
-	QUICC_BD			*rx_cur;
-	QUICC_BD			*tx_bd_base;
-	QUICC_BD			*tx_cur;
-} ser_info_t;
-
-
-/* since kmalloc_init() does not get called until much after this initialization: */
-static ser_info_t  quicc_ser_info[NR_PORTS];
-static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
-static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
-
-static void change_speed(ser_info_t *info);
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
-
-static inline int serial_paranoia_check(ser_info_t *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for serial struct (%s) in %s\n";
-	static const char *badinfo =
-		"Warning: null async_struct for (%s) in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts,
- * indexed by the termio value.  The generic CPM functions are responsible
- * for setting and assigning baud rate generators for us.
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
-
-/* This sucks. There is a better way: */
-#if defined(CONFIG_CONSOLE_9600)
-  #define CONSOLE_BAUDRATE 9600
-#elif defined(CONFIG_CONSOLE_19200)
-  #define CONSOLE_BAUDRATE 19200
-#elif defined(CONFIG_CONSOLE_115200)
-  #define CONSOLE_BAUDRATE 115200
-#else
-  #warning "console baud rate undefined"
-  #define CONSOLE_BAUDRATE 9600
-#endif
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_360_stop(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
- 	volatile struct scc_regs *sccp;
- 	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm &= ~UART_SCCM_TX;
-	} else {
-		/* smcp = &cpmp->cp_smc[idx]; */
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm &= ~SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-
-static void rs_360_start(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm |= UART_SCCM_TX;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm |= SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- * Note: rs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off.  People who may want to modify
- * rs_interrupt() should try to keep the interrupt handler as fast as
- * possible.  After you are done making modifications, it is not a bad
- * idea to do:
- * 
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static _INLINE_ void receive_chars(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-	unsigned char ch, flag, *cp;
-	/*int	ignored = 0;*/
-	int	i;
-	ushort	status;
-	 struct	async_icount *icount; 
-	/* struct	async_icount_24 *icount; */
-	volatile QUICC_BD	*bdp;
-
-	icount = &info->state->icount;
-
-	/* Just loop through the closed BDs and copy the characters into
-	 * the buffer.
-	 */
-	bdp = info->rx_cur;
-	for (;;) {
-		if (bdp->status & BD_SC_EMPTY)	/* If this one is empty */
-			break;			/*   we are all done */
-
-		/* The read status mask tell us what we should do with
-		 * incoming characters, especially if errors occur.
-		 * One special case is the use of BD_SC_EMPTY.  If
-		 * this is not set, we are supposed to be ignoring
-		 * inputs.  In this case, just mark the buffer empty and
-		 * continue.
-		 */
-		if (!(info->read_status_mask & BD_SC_EMPTY)) {
-			bdp->status |= BD_SC_EMPTY;
-			bdp->status &=
-				~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-			if (bdp->status & BD_SC_WRAP)
-				bdp = info->rx_bd_base;
-			else
-				bdp++;
-			continue;
-		}
-
-		/* Get the number of characters and the buffer pointer.
-		*/
-		i = bdp->length;
-		/* cp = (unsigned char *)__va(bdp->buf); */
-		cp = (char *)bdp->buf;
-		status = bdp->status;
-
-		while (i-- > 0) {
-			ch = *cp++;
-			icount->rx++;
-
-#ifdef SERIAL_DEBUG_INTR
-			printk("DR%02x:%02x...", ch, status);
-#endif
-			flag = TTY_NORMAL;
-
-			if (status & (BD_SC_BR | BD_SC_FR |
-				       BD_SC_PR | BD_SC_OV)) {
-				/*
-				 * For statistics only
-				 */
-				if (status & BD_SC_BR)
-					icount->brk++;
-				else if (status & BD_SC_PR)
-					icount->parity++;
-				else if (status & BD_SC_FR)
-					icount->frame++;
-				if (status & BD_SC_OV)
-					icount->overrun++;
-
-				/*
-				 * Now check to see if character should be
-				 * ignored, and mask off conditions which
-				 * should be ignored.
-				if (status & info->ignore_status_mask) {
-					if (++ignored > 100)
-						break;
-					continue;
-				}
-				 */
-				status &= info->read_status_mask;
-		
-				if (status & (BD_SC_BR)) {
-#ifdef SERIAL_DEBUG_INTR
-					printk("handling break....");
-#endif
-					*tty->flip.flag_buf_ptr = TTY_BREAK;
-					if (info->flags & ASYNC_SAK)
-						do_SAK(tty);
-				} else if (status & BD_SC_PR)
-					flag = TTY_PARITY;
-				else if (status & BD_SC_FR)
-					flag = TTY_FRAME;
-			}
-			tty_insert_flip_char(tty, ch, flag);
-			if (status & BD_SC_OV)
-				/*
-				 * Overrun is special, since it's
-				 * reported immediately, and doesn't
-				 * affect the current character
-				 */
-				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
-
-		/* This BD is ready to be used again.  Clear status.
-		 * Get next BD.
-		 */
-		bdp->status |= BD_SC_EMPTY;
-		bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->rx_bd_base;
-		else
-			bdp++;
-	}
-
-	info->rx_cur = (QUICC_BD *)bdp;
-
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void receive_break(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-
-	info->state->icount.brk++;
-	/* Check to see if there is room in the tty buffer for
-	 * the break.  If not, we exit now, losing the break.  FIXME
-	 */
-	tty_insert_flip_char(tty, 0, TTY_BREAK);
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void transmit_chars(ser_info_t *info)
-{
-
-	if ((info->flags & TX_WAKEUP) ||
-	    (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
-		schedule_work(&info->tqueue);
-	}
-
-#ifdef SERIAL_DEBUG_INTR
-	printk("THRE...");
-#endif
-}
-
-#ifdef notdef
-	/* I need to do this for the SCCs, so it is left as a reminder.
-	*/
-static _INLINE_ void check_modem_status(struct async_struct *info)
-{
-	int	status;
-	/* struct	async_icount *icount; */
-	struct	async_icount_24 *icount;
-	
-	status = serial_in(info, UART_MSR);
-
-	if (status & UART_MSR_ANY_DELTA) {
-		icount = &info->state->icount;
-		/* update input line counters */
-		if (status & UART_MSR_TERI)
-			icount->rng++;
-		if (status & UART_MSR_DDSR)
-			icount->dsr++;
-		if (status & UART_MSR_DDCD) {
-			icount->dcd++;
-#ifdef CONFIG_HARD_PPS
-			if ((info->flags & ASYNC_HARDPPS_CD) &&
-			    (status & UART_MSR_DCD))
-				hardpps();
-#endif
-		}
-		if (status & UART_MSR_DCTS)
-			icount->cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
-	}
-
-	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
-		printk("ttys%d CD now %s...", info->line,
-		       (status & UART_MSR_DCD) ? "on" : "off");
-#endif		
-		if (status & UART_MSR_DCD)
-			wake_up_interruptible(&info->open_wait);
-		else {
-#ifdef SERIAL_DEBUG_OPEN
-			printk("scheduling hangup...");
-#endif
-			queue_task(&info->tqueue_hangup,
-					   &tq_scheduler);
-		}
-	}
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->port.tty->hw_stopped) {
-			if (status & UART_MSR_CTS) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx start...");
-#endif
-				info->port.tty->hw_stopped = 0;
-				info->IER |= UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-				return;
-			}
-		} else {
-			if (!(status & UART_MSR_CTS)) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx stop...");
-#endif
-				info->port.tty->hw_stopped = 1;
-				info->IER &= ~UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-			}
-		}
-	}
-}
-#endif
-
-/*
- * This is the serial driver's interrupt routine for a single port
- */
-/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
-static void rs_360_interrupt(int vec, void *dev_id)
-{
-	u_char	events;
-	int	idx;
-	ser_info_t *info;
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	
-	info = dev_id;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		events = sccp->scc_scce;
-		if (events & SCCM_RX)
-			receive_chars(info);
-		if (events & SCCM_TX)
-			transmit_chars(info);
-		sccp->scc_scce = events;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		events = smcp->smc_smce;
-		if (events & SMCM_BRKE)
-			receive_break(info);
-		if (events & SMCM_RX)
-			receive_chars(info);
-		if (events & SMCM_TX)
-			transmit_chars(info);
-		smcp->smc_smce = events;
-	}
-	
-#ifdef SERIAL_DEBUG_INTR
-	printk("rs_interrupt_single(%d, %x)...",
-					info->state->smc_scc_num, events);
-#endif
-#ifdef modem_control
-	check_modem_status(info);
-#endif
-	info->last_active = jiffies;
-#ifdef SERIAL_DEBUG_INTR
-	printk("end.\n");
-#endif
-}
-
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-
-static void do_softint(void *private_)
-{
-	ser_info_t	*info = (ser_info_t *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-		tty_wakeup(tty);
-}
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(void *private_)
-{
-	struct async_struct	*info = (struct async_struct *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
-static int startup(ser_info_t *info)
-{
-	unsigned long flags;
-	int	retval=0;
-	int	idx;
-	/*struct serial_state *state = info->state;*/
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_uart_pram	*up;
-	volatile struct uart_pram	    *scup;
-
-
-	local_irq_save(flags);
-
-	if (info->flags & ASYNC_INITIALIZED) {
-		goto errout;
-	}
-
-#ifdef maybe
-	if (!state->port || !state->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		goto errout;
-	}
-#endif
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("starting up ttys%d (irq %d)...", info->line, state->irq);
-#endif
-
-
-#ifdef modem_control
-	info->MCR = 0;
-	if (info->port.tty->termios->c_cflag & CBAUD)
-		info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-#endif
-	
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	change_speed(info);
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		scup = &pquicc->pram[info->state->port].scc.pscc.u;
-
-		scup->mrblr = RX_BUF_SIZE;
-		scup->max_idl = RX_BUF_SIZE;
-
-		sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
-		sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Enable interrupts and I/O.
-		*/
-		smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-		smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
-
-		/* We can tune the buffer length and idle characters
-		 * to take advantage of the entire incoming buffer size.
-		 * If mrblr is something other than 1, maxidl has to be
-		 * non-zero or we never get an interrupt.  The maxidl
-		 * is the number of character times we wait after reception
-		 * of the last character before we decide no more characters
-		 * are coming.
-		 */
-		/* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
-		/* holy unionized structures, Batman: */
-		up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-		up->mrblr = RX_BUF_SIZE;
-		up->max_idl = RX_BUF_SIZE;
-
-		up->brkcr = 1;	/* number of break chars */
-	}
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
-	
-errout:
-	local_irq_restore(flags);
-	return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(ser_info_t *info)
-{
-	unsigned long	flags;
-	struct serial_state *state;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!(info->flags & ASYNC_INITIALIZED))
-		return;
-
-	state = info->state;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       state->irq);
-#endif
-	
-	local_irq_save(flags);
-
-	idx = PORT_NUM(state->smc_scc_num);
-	if (state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-		sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Disable interrupts and I/O.
-		 */
-		smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-			smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	}
-	
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	info->flags &= ~ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(ser_info_t *info)
-{
-	int	baud_rate;
-	unsigned cflag, cval, scval, prev_mode;
-	int	i, bits, sbits, idx;
-	unsigned long	flags;
-	struct serial_state *state;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info->port.tty || !info->port.tty->termios)
-		return;
-	cflag = info->port.tty->termios->c_cflag;
-
-	state = info->state;
-
-	/* Character length programmed into the mode register is the
-	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
-	 * 1 or 2 stop bits, minus 1.
-	 * The value 'bits' counts this for us.
-	 */
-	cval = 0;
-	scval = 0;
-
-	/* byte size and parity */
-	switch (cflag & CSIZE) {
-	      case CS5: bits = 5; break;
-	      case CS6: bits = 6; break;
-	      case CS7: bits = 7; break;
-	      case CS8: bits = 8; break;
-	      /* Never happens, but GCC is too dumb to figure it out */
-	      default:  bits = 8; break;
-	}
-	sbits = bits - 5;
-
-	if (cflag & CSTOPB) {
-		cval |= SMCMR_SL;	/* Two stops */
-		scval |= SCU_PMSR_SL;
-		bits++;
-	}
-	if (cflag & PARENB) {
-		cval |= SMCMR_PEN;
-		scval |= SCU_PMSR_PEN;
-		bits++;
-	}
-	if (!(cflag & PARODD)) {
-		cval |= SMCMR_PM_EVEN;
-		scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
-	}
-
-	/* Determine divisor based on baud rate */
-	i = cflag & CBAUD;
-	if (i >= (sizeof(baud_table)/sizeof(int)))
-		baud_rate = 9600;
-	else
-		baud_rate = baud_table[i];
-
-	info->timeout = (TX_BUF_SIZE*HZ*bits);
-	info->timeout += HZ/50;		/* Add .02 seconds of slop */
-
-#ifdef modem_control
-	/* CTS flow control flag and modem status interrupts */
-	info->IER &= ~UART_IER_MSI;
-	if (info->flags & ASYNC_HARDPPS_CD)
-		info->IER |= UART_IER_MSI;
-	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
-		info->IER |= UART_IER_MSI;
-	} else
-		info->flags &= ~ASYNC_CTS_FLOW;
-	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
-	else {
-		info->flags |= ASYNC_CHECK_CD;
-		info->IER |= UART_IER_MSI;
-	}
-	serial_out(info, UART_IER, info->IER);
-#endif
-
-	/*
-	 * Set up parity check flag
-	 */
-	info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
-	if (I_INPCK(info->port.tty))
-		info->read_status_mask |= BD_SC_FR | BD_SC_PR;
-	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
-		info->read_status_mask |= BD_SC_BR;
-	
-	/*
-	 * Characters to ignore
-	 */
-	info->ignore_status_mask = 0;
-	if (I_IGNPAR(info->port.tty))
-		info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
-	if (I_IGNBRK(info->port.tty)) {
-		info->ignore_status_mask |= BD_SC_BR;
-		/*
-		 * If we're ignore parity and break indicators, ignore 
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(info->port.tty))
-			info->ignore_status_mask |= BD_SC_OV;
-	}
-	/*
-	 * !!! ignore all characters if CREAD is not set
-	 */
-	if ((cflag & CREAD) == 0)
-	 info->read_status_mask &= ~BD_SC_EMPTY;
-	 local_irq_save(flags);
-
-	 /* Start bit has not been added (so don't, because we would just
-	  * subtract it later), and we need to add one for the number of
-	  * stops bits (there is always at least one).
-	  */
-	 bits++;
-	 idx = PORT_NUM(state->smc_scc_num);
-	 if (state->smc_scc_num & NUM_IS_SCC) {
-         sccp = &pquicc->scc_regs[idx];
-         sccp->scc_psmr = (sbits << 12) | scval;
-     } else {
-         smcp = &pquicc->smc_regs[idx];
-
-		/* Set the mode register.  We want to keep a copy of the
-		 * enables, because we want to put them back if they were
-		 * present.
-		 */
-		prev_mode = smcp->smc_smcmr;
-		smcp->smc_smcmr = smcr_mk_clen(bits) | cval |  SMCMR_SM_UART;
-		smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
-	}
-
-	m360_cpm_setbrg((state - rs_table), baud_rate);
-
-	local_irq_restore(flags);
-}
-
-static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD	*bdp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_put_char"))
-		return 0;
-
-	if (!tty)
-		return 0;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-	return 1;
-
-}
-
-static int rs_360_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, ret = 0;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD *bdp;
-
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(buf, count))
-		return ret;
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_write"))
-		return 0;
-
-	if (!tty) 
-		return 0;
-
-	bdp = info->tx_cur;
-
-	while (1) {
-		c = min(count, TX_BUF_SIZE);
-
-		if (c <= 0)
-			break;
-
-		if (bdp->status & BD_SC_READY) {
-			info->flags |= TX_WAKEUP;
-			break;
-		}
-
-		/* memcpy(__va(bdp->buf), buf, c); */
-		memcpy((void *)bdp->buf, buf, c);
-
-		bdp->length = c;
-		bdp->status |= BD_SC_READY;
-
-		buf += c;
-		count -= c;
-		ret += c;
-
-		/* Get next BD.
-		*/
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->tx_bd_base;
-		else
-			bdp++;
-		info->tx_cur = (QUICC_BD *)bdp;
-	}
-	return ret;
-}
-
-static int rs_360_write_room(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	ret;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-		return 0;
-
-	if ((info->tx_cur->status & BD_SC_READY) == 0) {
-		info->flags &= ~TX_WAKEUP;
-		ret = TX_BUF_SIZE;
-	}
-	else {
-		info->flags |= TX_WAKEUP;
-		ret = 0;
-	}
-	return ret;
-}
-
-/* I could track this with transmit counters....maybe later.
-*/
-static int rs_360_chars_in_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-		return 0;
-	return 0;
-}
-
-static void rs_360_flush_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-		return;
-
-	/* There is nothing to "flush", whatever we gave the CPM
-	 * is on its way out.
-	 */
-	tty_wakeup(tty);
-	info->flags &= ~TX_WAKEUP;
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void rs_360_send_xchar(struct tty_struct *tty, char ch)
-{
-	volatile QUICC_BD	*bdp;
-
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_send_char"))
-		return;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_360_throttle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("throttle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		rs_360_send_xchar(tty, STOP_CHAR(tty));
-
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR &= ~UART_MCR_RTS;
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-static void rs_360_unthrottle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			rs_360_send_xchar(tty, START_CHAR(tty));
-	}
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR |= UART_MCR_RTS;
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-#ifdef maybe
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct async_struct * info, unsigned int *value)
-{
-	unsigned char status;
-	unsigned int result;
-
-	local_irq_disable();
-	status = serial_in(info, UART_LSR);
-	local_irq_enable();
-	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-	return put_user(result,value);
-}
-#endif
-
-static int rs_360_tiocmget(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned int result = 0;
-#ifdef modem_control
-	unsigned char control, status;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	control = info->MCR;
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	local_irq_enable();
-	result =  ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
-		| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
-#ifdef TIOCM_OUT1
-		| ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
-		| ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
-#endif
-		| ((status  & UART_MSR_DCD) ? TIOCM_CAR : 0)
-		| ((status  & UART_MSR_RI) ? TIOCM_RNG : 0)
-		| ((status  & UART_MSR_DSR) ? TIOCM_DSR : 0)
-		| ((status  & UART_MSR_CTS) ? TIOCM_CTS : 0);
-#endif
-	return result;
-}
-
-static int rs_360_tiocmset(struct tty_struct *tty,
-			   unsigned int set, unsigned int clear)
-{
-#ifdef modem_control
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
- 	unsigned int arg;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-	/* FIXME: locking on info->mcr */
- 	if (set & TIOCM_RTS)
- 		info->mcr |= UART_MCR_RTS;
- 	if (set & TIOCM_DTR)
- 		info->mcr |= UART_MCR_DTR;
-	if (clear & TIOCM_RTS)
-		info->MCR &= ~UART_MCR_RTS;
-	if (clear & TIOCM_DTR)
-		info->MCR &= ~UART_MCR_DTR;
-
-#ifdef TIOCM_OUT1
-	if (set & TIOCM_OUT1)
-		info->MCR |= UART_MCR_OUT1;
-	if (set & TIOCM_OUT2)
-		info->MCR |= UART_MCR_OUT2;
-	if (clear & TIOCM_OUT1)
-		info->MCR &= ~UART_MCR_OUT1;
-	if (clear & TIOCM_OUT2)
-		info->MCR &= ~UART_MCR_OUT2;
-#endif
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-	return 0;
-}
-
-/* Sending a break is a two step process on the SMC/SCC.  It is accomplished
- * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
- * command.  We take advantage of the begin/end functions to make this
- * happen.
- */
-static ushort	smc_chan_map[] = {
-	CPM_CR_CH_SMC1,
-	CPM_CR_CH_SMC2
-};
-
-static ushort	scc_chan_map[] = {
-	CPM_CR_CH_SCC1,
-	CPM_CR_CH_SCC2,
-	CPM_CR_CH_SCC3,
-	CPM_CR_CH_SCC4
-};
-
-static void begin_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int     idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-static void end_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(ser_info_t *info, unsigned int duration)
-{
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
-#endif
-	begin_break(info);
-	msleep_interruptible(duration);
-	end_break(info);
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("done jiffies=%lu\n", jiffies);
-#endif
-}
-
-
-/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- *     RI where only 0->1 is counted.
- */
-static int rs_360_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct async_icount cnow;
-
-	local_irq_disable();
-	cnow = info->state->icount;
-	local_irq_enable();
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-
-	return 0;
-}
-
-static int rs_360_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	int error;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int retval;
-	struct async_icount cnow; 
-	/* struct async_icount_24 cnow;*/ 	/* kernel counter temps */
-	struct serial_icounter_struct *p_cuser;	/* user space */
-
-	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-		return -ENODEV;
-
-	if (cmd != TIOCMIWAIT) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-	
-	switch (cmd) {
-		case TCSBRK:	/* SVID version: non-zero arg --> no break */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			if (!arg) {
-				send_break(info, 250);	/* 1/4 second */
-				if (signal_pending(current))
-					return -EINTR;
-			}
-			return 0;
-		case TCSBRKP:	/* support for POSIX tcsendbreak() */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			send_break(info, arg ? arg*100 : 250);
-			if (signal_pending(current))
-				return -EINTR;
-			return 0;
-		case TIOCSBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			begin_break(info);
-			return 0;
-		case TIOCCBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			end_break(info);
-			return 0;
-#ifdef maybe
-		case TIOCSERGETLSR: /* Get line status register */
-			return get_lsr_info(info, (unsigned int *) arg);
-#endif
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
- 		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-		 case TIOCMIWAIT:
-#ifdef modem_control
-			local_irq_disable();
-			/* note the counters on entry */
-			cprev = info->state->icount;
-			local_irq_enable();
-			while (1) {
-				interruptible_sleep_on(&info->delta_msr_wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				local_irq_disable();
-				cnow = info->state->icount; /* atomic copy */
-				local_irq_enable();
-				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
-				if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-				     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-				     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-				     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
-				}
-				cprev = cnow;
-			}
-			/* NOTREACHED */
-#else
-			return 0;
-#endif
-
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
-}
-
-/* FIX UP modem control here someday......
-*/
-static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	change_speed(info);
-
-#ifdef modem_control
-	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) &&
-	    !(tty->termios->c_cflag & CBAUD)) {
-		info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    (tty->termios->c_cflag & CBAUD)) {
-		info->MCR |= UART_MCR_DTR;
-		if (!tty->hw_stopped ||
-		    !(tty->termios->c_cflag & CRTSCTS)) {
-			info->MCR |= UART_MCR_RTS;
-		}
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle turning off CRTSCTS */
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		rs_360_start(tty);
-	}
-#endif
-
-#if 0
-	/*
-	 * No need to wake up processes in open wait, since they
-	 * sample the CLOCAL flag once, and don't recheck it.
-	 * XXX  It's not clear whether the current behavior is correct
-	 * or not.  Hence, this may change.....
-	 */
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_360_close(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	/* struct async_state *state; */
-	struct serial_state *state;
-	unsigned long	flags;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-		return;
-
-	state = info->state;
-	
-	local_irq_save(flags);
-	
-	if (tty_hung_up_p(filp)) {
-		DBG_CNT("before DEC-hung");
-		local_irq_restore(flags);
-		return;
-	}
-	
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk("rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		DBG_CNT("before DEC-2");
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	info->read_status_mask &= ~BD_SC_EMPTY;
-	if (info->flags & ASYNC_INITIALIZED) {
-
-		idx = PORT_NUM(info->state->smc_scc_num);
-		if (info->state->smc_scc_num & NUM_IS_SCC) {
-			sccp = &pquicc->scc_regs[idx];
-			sccp->scc_sccm &= ~UART_SCCM_RX;
-			sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
-		} else {
-			smcp = &pquicc->smc_regs[idx];
-			smcp->smc_smcm &= ~SMCM_RX;
-			smcp->smc_smcmr &= ~SMCMR_REN;
-		}
-		/*
-		 * Before we drop DTR, make sure the UART transmitter
-		 * has completely drained; this is especially
-		 * important if there is a transmit FIFO!
-		 */
-		rs_360_wait_until_sent(tty, info->timeout);
-	}
-	shutdown(info);
-	rs_360_flush_buffer(tty);
-	tty_ldisc_flush(tty);		
-	tty->closing = 0;
-	info->event = 0;
-	info->port.tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
-}
-
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-	/*int lsr;*/
-	volatile QUICC_BD *bdp;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
-		return;
-
-#ifdef maybe
-	if (info->state->type == PORT_UNKNOWN)
-		return;
-#endif
-
-	orig_jiffies = jiffies;
-	/*
-	 * Set the check interval to be 1/5 of the estimated time to
-	 * send a single character, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 * 
-	 * Note: we have to use pretty tight timings here to satisfy
-	 * the NIST-PCTS.
-	 */
-	char_time = 1;
-	if (timeout)
-		char_time = min(char_time, (unsigned long)timeout);
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
-	printk("jiff=%lu...", jiffies);
-#endif
-
-	/* We go through the loop at least once because we can't tell
-	 * exactly when the last character exits the shifter.  There can
-	 * be at least two characters waiting to be sent after the buffers
-	 * are empty.
-	 */
-	do {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
-/*		current->counter = 0;	 make us low-priority */
-		msleep_interruptible(jiffies_to_msecs(char_time));
-		if (signal_pending(current))
-			break;
-		if (timeout && (time_after(jiffies, orig_jiffies + timeout)))
-			break;
-		/* The 'tx_cur' is really the next buffer to send.  We
-		 * have to back up to the previous BD and wait for it
-		 * to go.  This isn't perfect, because all this indicates
-		 * is the buffer is available.  There are still characters
-		 * in the CPM FIFO.
-		 */
-		bdp = info->tx_cur;
-		if (bdp == info->tx_bd_base)
-			bdp += (TX_NUM_FIFO-1);
-		else
-			bdp--;
-	} while (bdp->status & BD_SC_READY);
-	current->state = TASK_RUNNING;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void rs_360_hangup(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct serial_state *state = info->state;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-		return;
-
-	state = info->state;
-	
-	rs_360_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   ser_info_t *info)
-{
-#ifdef DO_THIS_LATER
-	DECLARE_WAITQUEUE(wait, current);
-#endif
-	struct serial_state *state = info->state;
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 * If this is an SMC port, we don't have modem control to wait
-	 * for, so just get out here.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR)) ||
-	    !(info->state->smc_scc_num & NUM_IS_SCC)) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-	
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, state->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-#ifdef DO_THIS_LATER
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttys%d, count = %d\n",
-	       state->line, state->count);
-#endif
-	local_irq_disable();
-	if (!tty_hung_up_p(filp)) 
-		state->count--;
-	local_irq_enable();
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		if (tty->termios->c_cflag & CBAUD)
-			serial_out(info, UART_MCR,
-				   serial_inp(info, UART_MCR) |
-				   (UART_MCR_DTR | UART_MCR_RTS));
-		local_irq_enable();
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ASYNC_CLOSING) &&
-		    (do_clocal || (serial_in(info, UART_MSR) &
-				   UART_MSR_DCD)))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttys%d, count = %d\n",
-		       info->line, state->count);
-#endif
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		state->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttys%d, count = %d\n",
-	       info->line, state->count);
-#endif
-#endif /* DO_THIS_LATER */
-	if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}
-
-static int get_async_struct(int line, ser_info_t **ret_info)
-{
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	if (sstate->info) {
-		sstate->count++;
-		*ret_info = (ser_info_t *)sstate->info;
-		return 0;
-	}
-	else {
-		return -ENOMEM;
-	}
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_360_open(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t	*info;
-	int 		retval, line;
-
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	retval = get_async_struct(line, &info);
-	if (retval)
-		return retval;
-	if (serial_paranoia_check(info, tty->name, "rs_open"))
-		return -ENODEV;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	tty->driver_data = info;
-	info->port.tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("rs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s successful...", tty->name);
-#endif
-	return 0;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline int line_info(char *buf, struct serial_state *state)
-{
-#ifdef notdef
-	struct async_struct *info = state->info, scr_info;
-	char	stat_buf[30], control, status;
-#endif
-	int	ret;
-
-	ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
-		      state->line,
-		      (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
-		      (unsigned int)(state->port), state->irq);
-
-	if (!state->port || (state->type == PORT_UNKNOWN)) {
-		ret += sprintf(buf+ret, "\n");
-		return ret;
-	}
-
-#ifdef notdef
-	/*
-	 * Figure out the current RS-232 lines
-	 */
-	if (!info) {
-		info = &scr_info;	/* This is just for serial_{in,out} */
-
-		info->magic = SERIAL_MAGIC;
-		info->port = state->port;
-		info->flags = state->flags;
-		info->quot = 0;
-		info->port.tty = NULL;
-	}
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	control = info ? info->MCR : serial_in(info, UART_MCR);
-	local_irq_enable();
-	
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (control & UART_MCR_RTS)
-		strcat(stat_buf, "|RTS");
-	if (status & UART_MSR_CTS)
-		strcat(stat_buf, "|CTS");
-	if (control & UART_MCR_DTR)
-		strcat(stat_buf, "|DTR");
-	if (status & UART_MSR_DSR)
-		strcat(stat_buf, "|DSR");
-	if (status & UART_MSR_DCD)
-		strcat(stat_buf, "|CD");
-	if (status & UART_MSR_RI)
-		strcat(stat_buf, "|RI");
-
-	if (info->quot) {
-		ret += sprintf(buf+ret, " baud:%d",
-			       state->baud_base / info->quot);
-	}
-
-	ret += sprintf(buf+ret, " tx:%d rx:%d",
-		      state->icount.tx, state->icount.rx);
-
-	if (state->icount.frame)
-		ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
-	
-	if (state->icount.parity)
-		ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
-	
-	if (state->icount.brk)
-		ret += sprintf(buf+ret, " brk:%d", state->icount.brk);	
-
-	if (state->icount.overrun)
-		ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
-
-	/*
-	 * Last thing is the RS-232 status lines
-	 */
-	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-#endif
-	return ret;
-}
-
-int rs_360_read_proc(char *page, char **start, off_t off, int count,
-		 int *eof, void *data)
-{
-	int i, len = 0;
-	off_t	begin = 0;
-
-	len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
-	for (i = 0; i < NR_PORTS && len < 4000; i++) {
-		len += line_info(page + len, &rs_table[i]);
-		if (len+begin > off+count)
-			goto done;
-		if (len+begin < off) {
-			begin += len;
-			len = 0;
-		}
-	}
-	*eof = 1;
-done:
-	if (off >= len+begin)
-		return 0;
-	*start = page + (begin-off);
-	return ((count < begin+len-off) ? count : begin+len-off);
-}
-
-/*
- * ---------------------------------------------------------------------
- * rs_init() and friends
- *
- * rs_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static _INLINE_ void show_serial_version(void)
-{
- 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
-}
-
-
-/*
- * The serial console driver used during boot.  Note that these names
- * clash with those found in "serial.c", so we currently can't support
- * the 16xxx uarts and these at the same time.  I will fix this to become
- * an indirect function call from tty_io.c (or something).
- */
-
-#ifdef CONFIG_SERIAL_CONSOLE
-
-/*
- * Print a string to the serial port trying not to disturb any possible
- * real use of the port...
- */
-static void my_console_write(int idx, const char *s,
-				unsigned count)
-{
-	struct		serial_state	*ser;
-	ser_info_t		*info;
-	unsigned		i;
-	QUICC_BD		*bdp, *bdbase;
-	volatile struct smc_uart_pram	*up;
-	volatile	u_char		*cp;
-
-	ser = rs_table + idx;
-
-
-	/* If the port has been initialized for general use, we have
-	 * to use the buffer descriptors allocated there.  Otherwise,
-	 * we simply use the single buffer allocated.
-	 */
-	if ((info = (ser_info_t *)ser->info) != NULL) {
-		bdp = info->tx_cur;
-		bdbase = info->tx_bd_base;
-	}
-	else {
-		/* Pointer to UART in parameter ram.
-		*/
-		/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		/* Get the address of the host memory buffer.
-		 */
-		bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-	}
-
-	/*
-	 * We need to gracefully shut down the transmitter, disable
-	 * interrupts, then send our bytes out.
-	 */
-
-	/*
-	 * Now, do each character.  This is not as bad as it looks
-	 * since this is a holding FIFO and not a transmitting FIFO.
-	 * We could add the complexity of filling the entire transmit
-	 * buffer, but we would just wait longer between accesses......
-	 */
-	for (i = 0; i < count; i++, s++) {
-		/* Wait for transmitter fifo to empty.
-		 * Ready indicates output is ready, and xmt is doing
-		 * that, not that it is ready for us to send.
-		 */
-		while (bdp->status & BD_SC_READY);
-
-		/* Send the character out.
-		 */
-		cp = bdp->buf;
-		*cp = *s;
-		
-		bdp->length = 1;
-		bdp->status |= BD_SC_READY;
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = bdbase;
-		else
-			bdp++;
-
-		/* if a LF, also do CR... */
-		if (*s == 10) {
-			while (bdp->status & BD_SC_READY);
-			/* cp = __va(bdp->buf); */
-			cp = bdp->buf;
-			*cp = 13;
-			bdp->length = 1;
-			bdp->status |= BD_SC_READY;
-
-			if (bdp->status & BD_SC_WRAP) {
-				bdp = bdbase;
-			}
-			else {
-				bdp++;
-			}
-		}
-	}
-
-	/*
-	 * Finally, Wait for transmitter & holding register to empty
-	 *  and restore the IER
-	 */
-	while (bdp->status & BD_SC_READY);
-
-	if (info)
-		info->tx_cur = (QUICC_BD *)bdp;
-}
-
-static void serial_console_write(struct console *c, const char *s,
-				unsigned count)
-{
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(s, count))
-		return;
-#endif
-	my_console_write(c->index, s, count);
-}
-
-
-
-/*void console_print_68360(const char *p)
-{
-	const char *cp = p;
-	int i;
-
-	for (i=0;cp[i]!=0;i++);
-
-	serial_console_write (p, i);
-
-	//Comment this if you want to have a strict interrupt-driven output
-	//rs_fair_output();
-
-	return;
-}*/
-
-
-
-
-
-
-#ifdef CONFIG_XMON
-int
-xmon_360_write(const char *s, unsigned count)
-{
-	my_console_write(0, s, count);
-	return(count);
-}
-#endif
-
-#ifdef CONFIG_KGDB
-void
-putDebugChar(char ch)
-{
-	my_console_write(0, &ch, 1);
-}
-#endif
-
-/*
- * Receive character from the serial port.  This only works well
- * before the port is initialized for real use.
- */
-static int my_console_wait_key(int idx, int xmon, char *obuf)
-{
-	struct serial_state		*ser;
-	u_char			c, *cp;
-	ser_info_t		*info;
-	QUICC_BD		*bdp;
-	volatile struct smc_uart_pram	*up;
-	int				i;
-
-	ser = rs_table + idx;
-
-	/* Get the address of the host memory buffer.
-	 * If the port has been initialized for general use, we must
-	 * use information from the port structure.
-	 */
-	if ((info = (ser_info_t *)ser->info))
-		bdp = info->rx_cur;
-	else
-		/* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
-		bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-
-	/* Pointer to UART in parameter ram.
-	 */
-	/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-	up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-	/*
-	 * We need to gracefully shut down the receiver, disable
-	 * interrupts, then read the input.
-	 * XMON just wants a poll.  If no character, return -1, else
-	 * return the character.
-	 */
-	if (!xmon) {
-		while (bdp->status & BD_SC_EMPTY);
-	}
-	else {
-		if (bdp->status & BD_SC_EMPTY)
-			return -1;
-	}
-
-	cp = (char *)bdp->buf;
-
-	if (obuf) {
-		i = c = bdp->length;
-		while (i-- > 0)
-			*obuf++ = *cp++;
-	}
-	else {
-		c = *cp;
-	}
-	bdp->status |= BD_SC_EMPTY;
-
-	if (info) {
-		if (bdp->status & BD_SC_WRAP) {
-			bdp = info->rx_bd_base;
-		}
-		else {
-			bdp++;
-		}
-		info->rx_cur = (QUICC_BD *)bdp;
-	}
-
-	return((int)c);
-}
-
-static int serial_console_wait_key(struct console *co)
-{
-	return(my_console_wait_key(co->index, 0, NULL));
-}
-
-#ifdef CONFIG_XMON
-int
-xmon_360_read_poll(void)
-{
-	return(my_console_wait_key(0, 1, NULL));
-}
-
-int
-xmon_360_read_char(void)
-{
-	return(my_console_wait_key(0, 0, NULL));
-}
-#endif
-
-#ifdef CONFIG_KGDB
-static char kgdb_buf[RX_BUF_SIZE], *kgdp;
-static int kgdb_chars;
-
-unsigned char
-getDebugChar(void)
-{
-	if (kgdb_chars <= 0) {
-		kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
-		kgdp = kgdb_buf;
-	}
-	kgdb_chars--;
-
-	return(*kgdp++);
-}
-
-void kgdb_interruptible(int state)
-{
-}
-void kgdb_map_scc(void)
-{
-	struct		serial_state *ser;
-	uint		mem_addr;
-	volatile	QUICC_BD		*bdp;
-	volatile	smc_uart_t	*up;
-
-	cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-	/* To avoid data cache CPM DMA coherency problems, allocate a
-	 * buffer in the CPM DPRAM.  This will work until the CPM and
-	 * serial ports are initialized.  At that time a memory buffer
-	 * will be allocated.
-	 * The port is already initialized from the boot procedure, all
-	 * we do here is give it a different buffer and make it a FIFO.
-	 */
-
-	ser = rs_table;
-
-	/* Right now, assume we are using SMCs.
-	*/
-	up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
-
-	/* Allocate space for an input FIFO, plus a few bytes for output.
-	 * Allocate bytes to maintain word alignment.
-	 */
-	mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
-	bdp->buf = mem_addr;
-
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
-	bdp->buf = mem_addr+RX_BUF_SIZE;
-
-	up->smc_mrblr = RX_BUF_SIZE;		/* receive buffer length */
-	up->smc_maxidl = RX_BUF_SIZE;
-}
-#endif
-
-static struct tty_struct *serial_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-
-struct console sercons = {
- 	.name		= "ttyS",
- 	.write		= serial_console_write,
- 	.device		= serial_console_device,
- 	.wait_key	= serial_console_wait_key,
- 	.setup		= serial_console_setup,
- 	.flags		= CON_PRINTBUFFER,
- 	.index		= CONFIG_SERIAL_CONSOLE_PORT, 
-};
-
-
-
-/*
- *	Register console.
- */
-long console_360_init(long kmem_start, long kmem_end)
-{
-	register_console(&sercons);
-	/*register_console (console_print_68360); - 2.0.38 only required a write
-      function pointer. */
-	return kmem_start;
-}
-
-#endif
-
-/* Index in baud rate table of the default console baud rate.
-*/
-static	int	baud_idx;
-
-static const struct tty_operations rs_360_ops = {
-	.owner = THIS_MODULE,
-	.open = rs_360_open,
-	.close = rs_360_close,
-	.write = rs_360_write,
-	.put_char = rs_360_put_char,
-	.write_room = rs_360_write_room,
-	.chars_in_buffer = rs_360_chars_in_buffer,
-	.flush_buffer = rs_360_flush_buffer,
-	.ioctl = rs_360_ioctl,
-	.throttle = rs_360_throttle,
-	.unthrottle = rs_360_unthrottle,
-	/* .send_xchar = rs_360_send_xchar, */
-	.set_termios = rs_360_set_termios,
-	.stop = rs_360_stop,
-	.start = rs_360_start,
-	.hangup = rs_360_hangup,
-	/* .wait_until_sent = rs_360_wait_until_sent, */
-	/* .read_proc = rs_360_read_proc, */
-	.tiocmget = rs_360_tiocmget,
-	.tiocmset = rs_360_tiocmset,
-	.get_icount = rs_360_get_icount,
-};
-
-static int __init rs_360_init(void)
-{
-	struct serial_state * state;
-	ser_info_t	*info;
-	void       *mem_addr;
-	uint 		dp_addr, iobits;
-	int		    i, j, idx;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC		*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct scc_regs	*scp;
-	volatile	struct uart_pram	*sup;
-	/* volatile	immap_t		*immap; */
-	
-	serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!serial_driver)
-		return -1;
-
-	show_serial_version();
-
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &rs_360_ops);
-	
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-	/* immap = (immap_t *)IMAP_ADDR; */	/* and to internal registers */
-
-
-	/* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
-	 */
-	/* The "standard" configuration through the 860.
-	*/
-/* 	immap->im_ioport.iop_papar |= 0x00fc; */
-/* 	immap->im_ioport.iop_padir &= ~0x00fc; */
-/* 	immap->im_ioport.iop_paodr &= ~0x00fc; */
-	cp->pio_papar |= 0x00fc;
-	cp->pio_padir &= ~0x00fc;
-	/* cp->pio_paodr &= ~0x00fc; */
-
-
-	/* Since we don't yet do modem control, connect the port C pins
-	 * as general purpose I/O.  This will assert CTS and CD for the
-	 * SCC ports.
-	 */
-	/* FIXME: see 360um p.7-365 and 860um p.34-12 
-	 * I can't make sense of these bits - mleslie*/
-/* 	immap->im_ioport.iop_pcdir |= 0x03c6; */
-/* 	immap->im_ioport.iop_pcpar &= ~0x03c6; */
-
-/* 	cp->pio_pcdir |= 0x03c6; */
-/* 	cp->pio_pcpar &= ~0x03c6; */
-
-
-
-	/* Connect SCC2 and SCC3 to NMSI.  Connect BRG3 to SCC2 and
-	 * BRG4 to SCC3.
-	 */
-	cp->si_sicr &= ~0x00ffff00;
-	cp->si_sicr |=  0x001b1200;
-
-#ifdef CONFIG_PP04
-	/* Frequentis PP04 forced to RS-232 until we know better.
-	 * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
-	 */
-	immap->im_ioport.iop_pcdir |= 0x000c;
-	immap->im_ioport.iop_pcpar &= ~0x000c;
-	immap->im_ioport.iop_pcdat &= ~0x000c;
-
-	/* This enables the TX driver.
-	*/
-	cp->cp_pbpar &= ~0x6000;
-	cp->cp_pbdat &= ~0x6000;
-#endif
-
-	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
-		state->magic = SSTATE_MAGIC;
-		state->line = i;
-		state->type = PORT_UNKNOWN;
-		state->custom_divisor = 0;
-		state->close_delay = 5*HZ/10;
-		state->closing_wait = 30*HZ;
-		state->icount.cts = state->icount.dsr = 
-			state->icount.rng = state->icount.dcd = 0;
-		state->icount.rx = state->icount.tx = 0;
-		state->icount.frame = state->icount.parity = 0;
-		state->icount.overrun = state->icount.brk = 0;
-		printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
-		       i, (unsigned int)(state->irq),
-		       (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
-
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* If we just printed the message on the console port, and
-		 * we are about to initialize it for general use, we have
-		 * to wait a couple of character times for the CR/NL to
-		 * make it out of the transmit buffer.
-		 */
-		if (i == CONFIG_SERIAL_CONSOLE_PORT)
-			mdelay(8);
-
-
-/* 		idx = PORT_NUM(info->state->smc_scc_num); */
-/* 		if (info->state->smc_scc_num & NUM_IS_SCC) */
-/* 			chan = scc_chan_map[idx]; */
-/* 		else */
-/* 			chan = smc_chan_map[idx]; */
-
-/* 		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
-/* 		while (cp->cp_cr & CPM_CR_FLG); */
-
-#endif
-		/* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
-		info = &quicc_ser_info[i];
-		if (info) {
-			memset (info, 0, sizeof(ser_info_t));
-			info->magic = SERIAL_MAGIC;
-			info->line = i;
-			info->flags = state->flags;
-			INIT_WORK(&info->tqueue, do_softint, info);
-			INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
-			init_waitqueue_head(&info->open_wait);
-			init_waitqueue_head(&info->close_wait);
-			info->state = state;
-			state->info = (struct async_struct *)info;
-
-			/* We need to allocate a transmit and receive buffer
-			 * descriptors from dual port ram, and a character
-			 * buffer area from host mem.
-			 */
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			 *  (for now this is from a static array of buffers :(
-			 */
-			/* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
-			/* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->rx_cur = info->rx_bd_base = bdp;
-
-			/* initialize rx buffer descriptors */
-			for (j=0; j<(RX_NUM_FIFO-1); j++) {
-				bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-				bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
-				mem_addr += RX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-			bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
-
-
-			idx = PORT_NUM(info->state->smc_scc_num);
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-
-#if defined (CONFIG_UCQUICC) && 1
-				/* set the transceiver mode to RS232 */
-				sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
-				sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
-				*(uint *)_periph_base = sipex_mode_bits;
-				/* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
-#endif
-			}
-
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			*/
-			/* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
-			/* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
-
-			/* initialize tx buffer descriptors */
-			for (j=0; j<(TX_NUM_FIFO-1); j++) {
-				bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-				bdp->status = BD_SC_INTRPT;
-				mem_addr += TX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-			bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
-
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-				scp = &pquicc->scc_regs[idx];
-				sup = &pquicc->pram[info->state->port].scc.pscc.u;
-				sup->rbase = dp_addr;
-				sup->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				sup->rfcr = SMC_EB;
-				sup->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				sup->mrblr = 1;
-				sup->max_idl = 0;
-				sup->brkcr = 1;
-				sup->parec = 0;
-				sup->frmer = 0;
-				sup->nosec = 0;
-				sup->brkec = 0;
-				sup->uaddr1 = 0;
-				sup->uaddr2 = 0;
-				sup->toseq = 0;
-				{
-					int i;
-					for (i=0;i<8;i++)
-						sup->cc[i] = 0x8000;
-				}
-				sup->rccm = 0xc0ff;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = scc_chan_map[idx];
-
-				/* execute the INIT RX & TX PARAMS command for this channel. */
-				cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				scp->scc_gsmr.w.high = 0;
-				scp->scc_gsmr.w.low = 
-					(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				scp->scc_sccm = 0;
-				scp->scc_scce = 0xffff;
-				scp->scc_dsr = 0x7e7e;
-				scp->scc_psmr = 0x3000;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-			}
-			else {
-				/* Configure SMCs Tx/Rx instead of port B
-				 * parallel I/O.
-				 */
-				up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-				up->rbase = dp_addr;
-
-				iobits = 0xc0 << (idx * 4);
-				cp->pip_pbpar |= iobits;
-				cp->pip_pbdir &= ~iobits;
-				cp->pip_pbodr &= ~iobits;
-
-
-				/* Connect the baud rate generator to the
-				 * SMC based upon index in rs_table.  Also
-				 * make sure it is connected to NMSI.
-				 */
-				cp->si_simode &= ~(0xffff << (idx * 16));
-				cp->si_simode |= (i << ((idx * 16) + 12));
-
-				up->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				up->rfcr = SMC_EB;
-				up->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				up->mrblr = 1;
-				up->max_idl = 0;
-				up->brkcr = 1;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = smc_chan_map[idx];
-
-				cp->cp_cr = mk_cr_cmd(chan,
-									  CPM_CR_INIT_TRX) | CPM_CR_FLG;
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					printk("");
-#endif
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				sp = &cp->smc_regs[idx];
-				sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				sp->smc_smcm = 0;
-				sp->smc_smce = 0xff;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-			}
-
-			/* Install interrupt handler.
-			*/
-			/* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info);  */
-			/*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
-			request_irq(state->irq, rs_360_interrupt, 0, "ttyS",
-				    (void *)info);
-
-			/* Set up the baud rate generator.
-			*/
-			m360_cpm_setbrg(i, baud_table[baud_idx]);
-
-		}
-	}
-
-	return 0;
-}
-module_init(rs_360_init);
-
-/* This must always be called before the rs_360_init() function, otherwise
- * it blows away the port control information.
- */
-//static int __init serial_console_setup( struct console *co, char *options)
-int serial_console_setup( struct console *co, char *options)
-{
-	struct		serial_state	*ser;
-	uint		mem_addr, dp_addr, bidx, idx, iobits;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC			*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct scc_regs	*scp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct uart_pram		*sup;
-
-/* mleslie TODO:
- * add something to the 68k bootloader to store a desired initial console baud rate */
-
-/* 	bd_t						*bd; */ /* a board info struct used by EPPC-bug */
-/* 	bd = (bd_t *)__res; */
-
- 	for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
-	 /* if (bd->bi_baudrate == baud_table[bidx]) */
- 		if (CONSOLE_BAUDRATE == baud_table[bidx])
-			break;
-
-	/* co->cflag = CREAD|CLOCAL|bidx|CS8; */
-	baud_idx = bidx;
-
-	ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-
-	idx = PORT_NUM(ser->smc_scc_num);
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-
-		/* TODO: need to set up SCC pin assignment etc. here */
-		
-	}
-	else {
-		iobits = 0xc0 << (idx * 4);
-		cp->pip_pbpar |= iobits;
-		cp->pip_pbdir &= ~iobits;
-		cp->pip_pbodr &= ~iobits;
-
-		/* Connect the baud rate generator to the
-		 * SMC based upon index in rs_table.  Also
-		 * make sure it is connected to NMSI.
-		 */
-		cp->si_simode &= ~(0xffff << (idx * 16));
-		cp->si_simode |= (idx << ((idx * 16) + 12));
-	}
-
-	/* When we get here, the CPM has been reset, so we need
-	 * to configure the port.
-	 * We need to allocate a transmit and receive buffer descriptor
-	 * from dual port ram, and a character buffer area from host mem.
-	 */
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	*/
-	dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
-
-	/* Allocate space for two 2 byte FIFOs in the host memory.
-	 */
-	/* mem_addr = m360_cpm_hostalloc(8); */
-	mem_addr = (uint)console_fifos;
-
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-	bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-	bdp->buf = (char *)mem_addr;
-	(bdp+1)->buf = (char *)(mem_addr+4);
-
-	/* For the receive, set empty and wrap.
-	 * For transmit, set wrap.
-	 */
-	bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
-	(bdp+1)->status = BD_SC_WRAP;
-
-	/* Set up the uart parameters in the parameter ram.
-	 */
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-		scp = &cp->scc_regs[idx];
-		/* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
-		sup = &pquicc->pram[ser->port].scc.pscc.u;
-
-		sup->rbase = dp_addr;
-		sup->tbase = dp_addr + sizeof(QUICC_BD);
-
-		/* Set up the uart parameters in the
-		 * parameter ram.
-		 */
-		sup->rfcr = SMC_EB;
-		sup->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single
-		 * character interrupts.  Using idle character
-		 * time requires some additional tuning.
-		 */
-		sup->mrblr = 1;
-		sup->max_idl = 0;
-		sup->brkcr = 1;
-		sup->parec = 0;
-		sup->frmer = 0;
-		sup->nosec = 0;
-		sup->brkec = 0;
-		sup->uaddr1 = 0;
-		sup->uaddr2 = 0;
-		sup->toseq = 0;
-		{
-			int i;
-			for (i=0;i<8;i++)
-				sup->cc[i] = 0x8000;
-		}
-		sup->rccm = 0xc0ff;
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = scc_chan_map[idx];
-
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		scp->scc_gsmr.w.high = 0;
-		scp->scc_gsmr.w.low = 
-			(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-		/* Disable all interrupts and clear all pending
-		 * events.
-		 */
-		scp->scc_sccm = 0;
-		scp->scc_scce = 0xffff;
-		scp->scc_dsr = 0x7e7e;
-		scp->scc_psmr = 0x3000;
-
-		scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	}
-	else {
-		/* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		up->rbase = dp_addr;	/* Base of receive buffer desc. */
-		up->tbase = dp_addr+sizeof(QUICC_BD);	/* Base of xmt buffer desc. */
-		up->rfcr = SMC_EB;
-		up->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single character interrupts.
-		*/
-		up->mrblr = 1;		/* receive buffer length */
-		up->max_idl = 0;		/* wait forever for next char */
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = smc_chan_map[idx];
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp = &cp->smc_regs[idx];
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* And finally, enable Rx and Tx.
-		*/
-		sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-	}
-
-	/* Set up the baud rate generator.
-	*/
-	/* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
-	m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
-
-	return 0;
-}
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/drivers/staging/serial/Kconfig b/drivers/staging/serial/Kconfig
deleted file mode 100644
index 9489688397e0..000000000000
--- a/drivers/staging/serial/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config SERIAL_68360_SMC
-	bool "68360 SMC uart support"
-	depends on M68360
-	help
-	  This driver supports the SMC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360_SCC
-	bool "68360 SCC uart support"
-	depends on M68360
-	help
-	  This driver supports the SCC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360
-	bool
-	depends on SERIAL_68360_SMC || SERIAL_68360_SCC
-	default y
diff --git a/drivers/staging/serial/Makefile b/drivers/staging/serial/Makefile
deleted file mode 100644
index 37a6a0b35fba..000000000000
--- a/drivers/staging/serial/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SERIAL_68360) += 68360serial.o
diff --git a/drivers/staging/serial/TODO b/drivers/staging/serial/TODO
deleted file mode 100644
index a19cda81dab4..000000000000
--- a/drivers/staging/serial/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-These are a few serial drivers that either do not build, or do not work if they
-do build, or if they seem to work, are for obsolete hardware, or are full of
-unfixable races and no one uses them anymore.
-
-If no one steps up to adopt any of these drivers, they will be removed
-in the 3.4 release.
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index ae1d815e2a53..0ec83aacee79 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -1559,8 +1559,9 @@ static void qt_unthrottle(struct tty_struct *tty)
 					  qt_read_bulk_callback, port);
 			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (result)
-				err("%s - failed restarting read urb, error %d",
-				    __func__, result);
+				dev_err(&port->dev,
+					"%s - failed restarting read urb, error %d\n",
+					__func__, result);
 		}
 	}
 	mutex_unlock(&qt_port->lock);
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index 83c582ed12e5..746c4cd5d30e 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -2,31 +2,19 @@
  * Silicon Motion SM7XX frame buffer device
  *
  * Copyright (C) 2006 Silicon Motion Technology Corp.
- * Authors: Ge Wang, gewang@siliconmotion.com
- *	    Boyod boyod.yang@siliconmotion.com.cn
+ * Authors:  Ge Wang, gewang@siliconmotion.com
+ *	     Boyod boyod.yang@siliconmotion.com.cn
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ * Author:   Wu Zhangjin, wuzhangjin@gmail.com
  *
  * Copyright (C) 2011 Igalia, S.L.
- * Author: Javier M. Mellid <jmunhoz@igalia.com>
+ * Author:   Javier M. Mellid <jmunhoz@igalia.com>
  *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
  *
- * Version 0.10.26192.21.01
- *	- Add PowerPC/Big endian support
- *	- Verified on 2.6.19.2
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
- *
- * Version 0.09.2621.00.01
- *	- Only support Linux Kernel's version 2.6.21
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
- *
- * Version 0.09
- *	- Only support Linux Kernel's version 2.6.12
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
  */
 
 #include <linux/io.h>
@@ -45,40 +33,19 @@
 
 #include "smtcfb.h"
 
-#ifdef DEBUG
-#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg)
-#else
-#define smdbg(format, arg...)
-#endif
-
 struct screen_info smtc_screen_info;
 
 /*
 * Private structure
 */
 struct smtcfb_info {
-	/*
-	 * The following is a pointer to be passed into the
-	 * functions below.  The modules outside the main
-	 * voyager.c driver have no knowledge as to what
-	 * is within this structure.
-	 */
 	struct fb_info fb;
-	struct display_switch *dispsw;
-	struct pci_dev *dev;
-	signed int currcon;
-
+	struct pci_dev *pdev;
 	struct {
 		u8 red, green, blue;
 	} palette[NR_RGB];
-
 	u_int palette_size;
-};
 
-struct par_info {
-	/*
-	 * Hardware
-	 */
 	u16 chipID;
 	unsigned char __iomem *m_pMMIO;
 	char __iomem *m_pLFB;
@@ -121,15 +88,6 @@ char __iomem *smtc_RegBaseAddress;	/* Memory Map IO starting address */
 char __iomem *smtc_VRAMBaseAddress;	/* video memory starting address */
 
 static u32 colreg[17];
-static struct par_info hw;	/* hardware information */
-
-u16 smtc_ChipIDs[] = {
-	0x710,
-	0x712,
-	0x720
-};
-
-#define numSMTCchipIDs ARRAY_SIZE(smtc_ChipIDs)
 
 static struct fb_var_screeninfo smtcfb_var = {
 	.xres           = 1024,
@@ -154,30 +112,29 @@ static struct fb_fix_screeninfo smtcfb_fix = {
 	.accel          = FB_ACCEL_SMI_LYNX,
 };
 
-static void sm712_set_timing(struct smtcfb_info *sfb,
-			     struct par_info *ppar_info)
+static void sm712_set_timing(struct smtcfb_info *sfb)
 {
 	int i = 0, j = 0;
 	u32 m_nScreenStride;
 
-	smdbg("\nppar_info->width = %d ppar_info->height = %d"
-			"sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n",
-			ppar_info->width, ppar_info->height,
-			sfb->fb.var.bits_per_pixel, ppar_info->hz);
+	dev_dbg(&sfb->pdev->dev,
+		"sfb->width=%d sfb->height=%d "
+		"sfb->fb.var.bits_per_pixel=%d sfb->hz=%d\n",
+		sfb->width, sfb->height, sfb->fb.var.bits_per_pixel, sfb->hz);
 
 	for (j = 0; j < numVGAModes; j++) {
-		if (VGAMode[j].mmSizeX == ppar_info->width &&
-		    VGAMode[j].mmSizeY == ppar_info->height &&
+		if (VGAMode[j].mmSizeX == sfb->width &&
+		    VGAMode[j].mmSizeY == sfb->height &&
 		    VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
-		    VGAMode[j].hz == ppar_info->hz) {
+		    VGAMode[j].hz == sfb->hz) {
 
-			smdbg("\nVGAMode[j].mmSizeX  = %d VGAMode[j].mmSizeY ="
-					"%d VGAMode[j].bpp = %d"
-					"VGAMode[j].hz=%d\n",
-					VGAMode[j].mmSizeX, VGAMode[j].mmSizeY,
-					VGAMode[j].bpp, VGAMode[j].hz);
+			dev_dbg(&sfb->pdev->dev,
+				"VGAMode[j].mmSizeX=%d VGAMode[j].mmSizeY=%d "
+				"VGAMode[j].bpp=%d VGAMode[j].hz=%d\n",
+				VGAMode[j].mmSizeX, VGAMode[j].mmSizeY,
+				VGAMode[j].bpp, VGAMode[j].hz);
 
-			smdbg("VGAMode index=%d\n", j);
+			dev_dbg(&sfb->pdev->dev, "VGAMode index=%d\n", j);
 
 			smtc_mmiowb(0x0, 0x3c6);
 
@@ -238,37 +195,37 @@ static void sm712_set_timing(struct smtcfb_info *sfb,
 	smtc_mmiowb(0x67, 0x3c2);
 
 	/* set VPR registers */
-	writel(0x0, ppar_info->m_pVPR + 0x0C);
-	writel(0x0, ppar_info->m_pVPR + 0x40);
+	writel(0x0, sfb->m_pVPR + 0x0C);
+	writel(0x0, sfb->m_pVPR + 0x40);
 
 	/* set data width */
 	m_nScreenStride =
-		(ppar_info->width * sfb->fb.var.bits_per_pixel) / 64;
+		(sfb->width * sfb->fb.var.bits_per_pixel) / 64;
 	switch (sfb->fb.var.bits_per_pixel) {
 	case 8:
-		writel(0x0, ppar_info->m_pVPR + 0x0);
+		writel(0x0, sfb->m_pVPR + 0x0);
 		break;
 	case 16:
-		writel(0x00020000, ppar_info->m_pVPR + 0x0);
+		writel(0x00020000, sfb->m_pVPR + 0x0);
 		break;
 	case 24:
-		writel(0x00040000, ppar_info->m_pVPR + 0x0);
+		writel(0x00040000, sfb->m_pVPR + 0x0);
 		break;
 	case 32:
-		writel(0x00030000, ppar_info->m_pVPR + 0x0);
+		writel(0x00030000, sfb->m_pVPR + 0x0);
 		break;
 	}
 	writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride),
-	       ppar_info->m_pVPR + 0x10);
+	       sfb->m_pVPR + 0x10);
 
 }
 
 static void sm712_setpalette(int regno, unsigned red, unsigned green,
 			     unsigned blue, struct fb_info *info)
 {
-	struct par_info *cur_par = (struct par_info *)info->par;
+	struct smtcfb_info *sfb = info->par;
 
-	if (cur_par->BaseAddressInVRAM)
+	if (sfb->BaseAddressInVRAM)
 		/*
 		 * second display palette for dual head. Enable CRT RAM, 6-bit
 		 * RAM
@@ -283,14 +240,13 @@ static void sm712_setpalette(int regno, unsigned red, unsigned green,
 	smtc_mmiowb(blue >> 10, dac_val);
 }
 
-static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info
-		*ppar_info)
+static void smtc_set_timing(struct smtcfb_info *sfb)
 {
-	switch (ppar_info->chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 	case 0x720:
-		sm712_set_timing(sfb, ppar_info);
+		sm712_set_timing(sfb);
 		break;
 	}
 }
@@ -310,7 +266,7 @@ static inline unsigned int chan_to_field(unsigned int chan,
 	return chan << bf->offset;
 }
 
-static int cfb_blank(int blank_mode, struct fb_info *info)
+static int smtc_blank(int blank_mode, struct fb_info *info)
 {
 	/* clear DPMS setting */
 	switch (blank_mode) {
@@ -660,10 +616,10 @@ void smtcfb_setmode(struct smtcfb_info *sfb)
 		break;
 	}
 
-	hw.width = sfb->fb.var.xres;
-	hw.height = sfb->fb.var.yres;
-	hw.hz = 60;
-	smtc_set_timing(sfb, &hw);
+	sfb->width = sfb->fb.var.xres;
+	sfb->height = sfb->fb.var.yres;
+	sfb->hz = 60;
+	smtc_set_timing(sfb);
 }
 
 static int smtc_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -697,7 +653,7 @@ static struct fb_ops smtcfb_ops = {
 	.fb_check_var = smtc_check_var,
 	.fb_set_par   = smtc_set_par,
 	.fb_setcolreg = smtc_setcolreg,
-	.fb_blank     = cfb_blank,
+	.fb_blank     = smtc_blank,
 	.fb_fillrect  = cfb_fillrect,
 	.fb_imageblit = cfb_imageblit,
 	.fb_copyarea  = cfb_copyarea,
@@ -710,8 +666,7 @@ static struct fb_ops smtcfb_ops = {
 /*
  * Alloc struct smtcfb_info and assign the default value
  */
-static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
-							char *name)
+static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *pdev, char *name)
 {
 	struct smtcfb_info *sfb;
 
@@ -720,8 +675,7 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
 	if (!sfb)
 		return NULL;
 
-	sfb->currcon = -1;
-	sfb->dev = dev;
+	sfb->pdev = pdev;
 
 	/*** Init sfb->fb with default value ***/
 	sfb->fb.flags = FBINFO_FLAG_DEFAULT;
@@ -745,7 +699,9 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
 	/* text mode acceleration */
 	sfb->fb.var.accel_flags = FB_ACCELF_TEXT;
 	sfb->fb.var.vmode = FB_VMODE_NONINTERLACED;
-	sfb->fb.par = &hw;
+
+	sfb->fb.par = sfb;
+
 	sfb->fb.pseudo_palette = colreg;
 
 	return sfb;
@@ -766,17 +722,17 @@ static void smtc_unmap_mmio(struct smtcfb_info *sfb)
  */
 
 static int smtc_map_smem(struct smtcfb_info *sfb,
-		struct pci_dev *dev, u_long smem_len)
+		struct pci_dev *pdev, u_long smem_len)
 {
 	if (sfb->fb.var.bits_per_pixel == 32) {
 #ifdef __BIG_ENDIAN
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0)
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0)
 			+ 0x800000;
 #else
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0);
 #endif
 	} else {
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0);
 	}
 
 	sfb->fb.fix.smem_len = smem_len;
@@ -784,8 +740,8 @@ static int smtc_map_smem(struct smtcfb_info *sfb,
 	sfb->fb.screen_base = smtc_VRAMBaseAddress;
 
 	if (!sfb->fb.screen_base) {
-		printk(KERN_ERR "%s: unable to map screen memory\n",
-				sfb->fb.fix.id);
+		dev_err(&pdev->dev,
+			"%s: unable to map screen memory\n", sfb->fb.fix.id);
 		return -ENOMEM;
 	}
 
@@ -831,16 +787,14 @@ static int __init sm712vga_setup(char *options)
 {
 	int index;
 
-	if (!options || !*options) {
-		smdbg("\n No vga parameter\n");
+	if (!options || !*options)
 		return -EINVAL;
-	}
 
 	smtc_screen_info.lfb_width = 0;
 	smtc_screen_info.lfb_height = 0;
 	smtc_screen_info.lfb_depth = 0;
 
-	smdbg("\nsm712vga_setup = %s\n", options);
+	pr_debug("sm712vga_setup = %s\n", options);
 
 	for (index = 0;
 	     index < ARRAY_SIZE(vesa_mode);
@@ -858,10 +812,6 @@ static int __init sm712vga_setup(char *options)
 }
 __setup("vga=", sm712vga_setup);
 
-/* Jason (08/13/2009)
- * Original init function changed to probe method to be used by pci_drv
- * process used to detect chips replaced with kernel process in pci_drv
- */
 static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
@@ -871,23 +821,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 	int err;
 	unsigned long pFramebufferPhysical;
 
-	printk(KERN_INFO
-		"Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n");
+	dev_info(&pdev->dev, "Silicon Motion display driver.");
 
 	err = pci_enable_device(pdev);	/* enable SMTC chip */
 	if (err)
 		return err;
 
-	hw.chipID = ent->device;
-	sprintf(name, "sm%Xfb", hw.chipID);
-
 	sfb = smtc_alloc_fb_info(pdev, name);
 
 	if (!sfb)
 		goto failed_free;
-	/* Jason (08/13/2009)
-	 * Store fb_info to be further used when suspending and resuming
-	 */
+
+	sfb->chipID = ent->device;
+	sprintf(name, "sm%Xfb", sfb->chipID);
+
 	pci_set_drvdata(pdev, sfb);
 
 	sm7xx_init_hw();
@@ -910,37 +857,37 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 #endif
 	/* Map address and memory detection */
 	pFramebufferPhysical = pci_resource_start(pdev, 0);
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID);
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chipRevID);
 
-	switch (hw.chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 		sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000;
 		sfb->fb.fix.mmio_len = 0x00400000;
 		smem_size = SM712_VIDEOMEMORYSIZE;
 #ifdef __BIG_ENDIAN
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
 		    ioremap(pFramebufferPhysical, 0x00c00000));
 #else
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
 		    ioremap(pFramebufferPhysical, 0x00800000));
 #endif
-		hw.m_pMMIO = (smtc_RegBaseAddress =
+		sfb->m_pMMIO = (smtc_RegBaseAddress =
 		    smtc_VRAMBaseAddress + 0x00700000);
-		hw.m_pDPR = smtc_VRAMBaseAddress + 0x00408000;
-		hw.m_pVPR = hw.m_pLFB + 0x0040c000;
+		sfb->m_pDPR = smtc_VRAMBaseAddress + 0x00408000;
+		sfb->m_pVPR = sfb->m_pLFB + 0x0040c000;
 #ifdef __BIG_ENDIAN
 		if (sfb->fb.var.bits_per_pixel == 32) {
 			smtc_VRAMBaseAddress += 0x800000;
-			hw.m_pLFB += 0x800000;
-			printk(KERN_INFO
-				"\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n",
-					smtc_VRAMBaseAddress, hw.m_pLFB);
+			sfb->m_pLFB += 0x800000;
+			dev_info(&pdev->dev,
+				 "smtc_VRAMBaseAddress=%p sfb->m_pLFB=%p",
+				  smtc_VRAMBaseAddress, sfb->m_pLFB);
 		}
 #endif
 		if (!smtc_RegBaseAddress) {
-			printk(KERN_ERR
-				"%s: unable to map memory mapped IO\n",
+			dev_err(&pdev->dev,
+				"%s: unable to map memory mapped IO!",
 				sfb->fb.fix.id);
 			err = -ENOMEM;
 			goto failed_fb;
@@ -962,20 +909,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 		sfb->fb.fix.mmio_start = pFramebufferPhysical;
 		sfb->fb.fix.mmio_len = 0x00200000;
 		smem_size = SM722_VIDEOMEMORYSIZE;
-		hw.m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000);
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
-		    hw.m_pDPR + 0x00200000);
-		hw.m_pMMIO = (smtc_RegBaseAddress =
-		    hw.m_pDPR + 0x000c0000);
-		hw.m_pVPR = hw.m_pDPR + 0x800;
+		sfb->m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000);
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
+		    sfb->m_pDPR + 0x00200000);
+		sfb->m_pMMIO = (smtc_RegBaseAddress =
+		    sfb->m_pDPR + 0x000c0000);
+		sfb->m_pVPR = sfb->m_pDPR + 0x800;
 
 		smtc_seqw(0x62, 0xff);
 		smtc_seqw(0x6a, 0x0d);
 		smtc_seqw(0x6b, 0x02);
 		break;
 	default:
-		printk(KERN_ERR
-		"No valid Silicon Motion display chip was detected!\n");
+		dev_err(&pdev->dev,
+			"No valid Silicon Motion display chip was detected!");
 
 		goto failed_fb;
 	}
@@ -992,22 +939,21 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 
 	smtcfb_setmode(sfb);
 	/* Primary display starting from 0 position */
-	hw.BaseAddressInVRAM = 0;
-	sfb->fb.par = &hw;
+	sfb->BaseAddressInVRAM = 0;
 
 	err = register_framebuffer(&sfb->fb);
 	if (err < 0)
 		goto failed;
 
-	printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode"
-			"%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID,
-			sfb->fb.var.xres, sfb->fb.var.yres,
-			sfb->fb.var.bits_per_pixel);
+	dev_info(&pdev->dev,
+		 "Silicon Motion SM%X Rev%X primary display mode %dx%d-%d Init Complete.",
+		 sfb->chipID, sfb->chipRevID, sfb->fb.var.xres,
+		 sfb->fb.var.yres, sfb->fb.var.bits_per_pixel);
 
 	return 0;
 
 failed:
-	printk(KERN_ERR "Silicon Motion, Inc.  primary display init fail\n");
+	dev_err(&pdev->dev, "Silicon Motion, Inc. primary display init fail.");
 
 	smtc_unmap_smem(sfb);
 	smtc_unmap_mmio(sfb);
@@ -1021,7 +967,6 @@ failed_free:
 }
 
 
-/* Jason (08/11/2009) PCI_DRV wrapper essential structs */
 static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = {
 	{ PCI_DEVICE(0x126f, 0x710), },
 	{ PCI_DEVICE(0x126f, 0x712), },
@@ -1030,9 +975,6 @@ static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = {
 };
 
 
-/* Jason (08/14/2009)
- * do some clean up when the driver module is removed
- */
 static void __devexit smtcfb_pci_remove(struct pci_dev *pdev)
 {
 	struct smtcfb_info *sfb;
@@ -1078,7 +1020,7 @@ static int smtcfb_pci_resume(struct device *device)
 
 	/* reinit hardware */
 	sm7xx_init_hw();
-	switch (hw.chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 		/* set MCLK = 14.31818 *  (0x16 / 0x2) */
diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h
index ab95af2b9c07..43d86f873410 100644
--- a/drivers/staging/sm7xx/smtcfb.h
+++ b/drivers/staging/sm7xx/smtcfb.h
@@ -13,19 +13,11 @@
  *  more details.
  */
 
-#define SMTC_LINUX_FB_VERSION	"version 0.11.2619.21.01 July 27, 2008"
-
 #define NR_PALETTE        256
 #define NR_RGB            2
 
 #define FB_ACCEL_SMI_LYNX 88
 
-#ifdef __BIG_ENDIAN
-#define PC_VGA            0
-#else
-#define PC_VGA            1
-#endif
-
 #define SCREEN_X_RES      1024
 #define SCREEN_Y_RES      600
 #define SCREEN_BPP        16
diff --git a/drivers/staging/telephony/ixj.c b/drivers/staging/telephony/ixj.c
index f96027921f60..fd7757ad7fa3 100644
--- a/drivers/staging/telephony/ixj.c
+++ b/drivers/staging/telephony/ixj.c
@@ -19,20 +19,20 @@
  *                  David W. Erhart, <derhart@quicknet.net>
  *                  John Sellers, <jsellers@quicknet.net>
  *                  Mike Preston, <mpreston@quicknet.net>
- *    
+ *
  * Fixes:           David Huggins-Daines, <dhd@cepstral.com>
  *                  Fabio Ferrari, <fabio.ferrari@digitro.com.br>
  *                  Artis Kugevics, <artis@mt.lv>
  *                  Daniele Bellucci, <bellucda@tiscali.it>
  *
- * More information about the hardware related to this driver can be found  
+ * More information about the hardware related to this driver can be found
  * at our website:    http://www.quicknet.net
  *
  * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
  * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
  * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
  * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *    
+ *
  * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
  * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
@@ -317,7 +317,7 @@ static IXJ *ixj[IXJMAX];
 /*
  *	Allocate a free IXJ device
  */
- 
+
 static IXJ *ixj_alloc()
 {
 	for(cnt=0; cnt<IXJMAX; cnt++)
@@ -366,7 +366,7 @@ static IXJ ixj[IXJMAX];
 /*
  *	Allocate a free IXJ device
  */
- 
+
 static IXJ *ixj_alloc(void)
 {
 	int cnt;
@@ -1084,7 +1084,7 @@ static void ixj_pstn_state(IXJ *j)
 							printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
 						j->cadence_f[4].on3, j->cadence_f[4].on3min, j->cadence_f[4].on3dot, j->cadence_f[4].on3max);
 							break;
-						case 6:	
+						case 6:
 							printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
 						j->cadence_f[4].off3, j->cadence_f[4].off3min, j->cadence_f[4].off3dot, j->cadence_f[4].off3max);
 							break;
@@ -1109,7 +1109,7 @@ static void ixj_pstn_state(IXJ *j)
 				}
 				j->pstn_ring_stop = j->pstn_ring_int = 0;
 				daa_set_mode(j, SOP_PU_SLEEP);
-			} 
+			}
 			outb_p(j->pld_scrw.byte, j->XILINXbase);
 			if (j->pstn_cid_intr && time_after(jiffies, j->pstn_cid_received + hertz)) {
 				ixj_daa_cid_read(j);
@@ -1133,7 +1133,7 @@ static void ixj_pstn_state(IXJ *j)
 							printk("IXJ DAA possible wink /dev/phone%d %ld\n", j->board, jiffies);
 						}
 						j->pstn_winkstart = jiffies;
-					} 
+					}
 				} else {
 					if (j->pstn_winkstart) {
 						if(ixjdebug & 0x0008) {
@@ -1524,7 +1524,7 @@ static inline void LED_SetState(int state, IXJ *j)
 /*********************************************************************
 *  GPIO Pins are configured as follows on the Quicknet Internet
 *  PhoneJACK Telephony Cards
-* 
+*
 * POTS Select        GPIO_6=0 GPIO_7=0
 * Mic/Speaker Select GPIO_6=0 GPIO_7=1
 * Handset Select     GPIO_6=1 GPIO_7=0
@@ -1932,7 +1932,7 @@ static int ixj_hookstate(IXJ *j)
 			if(fOffHook != j->p_hook) {
 				if(!j->checkwait) {
 					j->checkwait = jiffies;
-				} 
+				}
 				if(time_before(jiffies, j->checkwait + 2)) {
 					fOffHook ^= 1;
 				} else {
@@ -2342,8 +2342,8 @@ static int ixj_release(struct inode *inode, struct file *file_p)
 		j->ixj_signals[cnt] = SIGIO;
 
 	/* Set the excetion signal enable flags */
-	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = 
-	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = 
+	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
+	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
 	j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
 
 	file_p->private_data = NULL;
@@ -2506,7 +2506,7 @@ static int read_filters(IXJ *j)
 					j->cadence_f[cnt].on1, j->cadence_f[cnt].on1min, j->cadence_f[cnt].on1dot, j->cadence_f[cnt].on1max);
 						break;
 					case 2:
-						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min, 
+						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min,
 															j->cadence_f[cnt].off1max);
 						break;
 					case 3:
@@ -2521,12 +2521,12 @@ static int read_filters(IXJ *j)
 						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].on3min,
 															j->cadence_f[cnt].on3max);
 						break;
-					case 6:	
+					case 6:
 						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off3min,
 															j->cadence_f[cnt].off3max);
 						break;
 				}
-			} 
+			}
 		}
 		if (j->cadence_f[cnt].state == 7) {
 			j->cadence_f[cnt].state = 0;
@@ -2656,37 +2656,37 @@ static void ulaw2alaw(unsigned char *buff, unsigned long len)
 {
 	static unsigned char table_ulaw2alaw[] =
 	{
-		0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D, 
-		0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25, 
-		0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D, 
-		0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35, 
-		0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02, 
-		0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A, 
-		0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12, 
-		0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B, 
-		0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63, 
-		0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79, 
-		0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71, 
-		0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D, 
-		0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45, 
-		0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D, 
-		0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51, 
-		0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5, 
-		0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD, 
-		0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5, 
-		0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD, 
-		0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5, 
-		0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82, 
-		0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A, 
-		0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92, 
-		0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB, 
-		0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3, 
-		0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9, 
-		0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1, 
-		0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD, 
-		0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5, 
-		0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD, 
-		0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1, 
+		0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D,
+		0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25,
+		0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D,
+		0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35,
+		0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02,
+		0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A,
+		0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12,
+		0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B,
+		0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63,
+		0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79,
+		0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71,
+		0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D,
+		0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45,
+		0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D,
+		0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51,
+		0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5,
+		0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD,
+		0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5,
+		0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD,
+		0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5,
+		0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82,
+		0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A,
+		0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92,
+		0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB,
+		0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3,
+		0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9,
+		0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1,
+		0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD,
+		0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5,
+		0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD,
+		0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1,
 		0xD6, 0xD6, 0xD7, 0xD7, 0xD4, 0xD4, 0xD5, 0xD5
 	};
 
@@ -2701,37 +2701,37 @@ static void alaw2ulaw(unsigned char *buff, unsigned long len)
 {
 	static unsigned char table_alaw2ulaw[] =
 	{
-		0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C, 
-		0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24, 
-		0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C, 
-		0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34, 
-		0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 
-		0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 
-		0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 
-		0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 
-		0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 
-		0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E, 
-		0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A, 
-		0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 
-		0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B, 
-		0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43, 
-		0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59, 
-		0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51, 
-		0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC, 
-		0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4, 
-		0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC, 
-		0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4, 
-		0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 
-		0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 
-		0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 
-		0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 
-		0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 
-		0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE, 
-		0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA, 
-		0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 
-		0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB, 
-		0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3, 
-		0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9, 
+		0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C,
+		0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24,
+		0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C,
+		0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34,
+		0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D,
+		0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05,
+		0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D,
+		0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15,
+		0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65,
+		0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E,
+		0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A,
+		0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D,
+		0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B,
+		0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43,
+		0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59,
+		0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51,
+		0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC,
+		0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4,
+		0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC,
+		0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4,
+		0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D,
+		0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85,
+		0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D,
+		0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95,
+		0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5,
+		0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE,
+		0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA,
+		0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED,
+		0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB,
+		0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3,
+		0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9,
 		0xCF, 0xCF, 0xCE, 0xCE, 0xD2, 0xD3, 0xD0, 0xD1
 	};
 
@@ -3090,7 +3090,7 @@ static int ixj_write_cid_string(IXJ *j, char *s, int checksum)
 
 static void ixj_pad_fsk(IXJ *j, int pad)
 {
-	int cnt; 
+	int cnt;
 
 	for (cnt = 0; cnt < pad; cnt++) {
 		if(j->fskdcnt < (j->fsksize - 1))
@@ -3474,7 +3474,7 @@ static void ixj_write_frame(IXJ *j)
 			ixj_post_cid(j);
 		}
 		/* This may seem rude, but if we just played one frame of FSK data for CallerID
-		   and there is real audio data in the buffer, we need to throw it away because 
+		   and there is real audio data in the buffer, we need to throw it away because
 		   we just used it's time slot */
 		if (j->write_buffer_rp > j->write_buffer_wp) {
 			j->write_buffer_rp += j->cid_play_frame_size * 2;
@@ -3486,7 +3486,7 @@ static void ixj_write_frame(IXJ *j)
 
 			wake_up_interruptible(&j->poll_q);	/* Wake any blocked selects */
 		}
-	} else if (j->write_buffer && j->write_buffers_empty < 1) { 
+	} else if (j->write_buffer && j->write_buffers_empty < 1) {
 		if (j->write_buffer_wp > j->write_buffer_rp) {
 			frame_count =
 			    (j->write_buffer_wp - j->write_buffer_rp) / (j->play_frame_size * 2);
@@ -4150,7 +4150,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_MED:
@@ -4161,7 +4161,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_HIGH:
@@ -4172,7 +4172,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_AGC:
@@ -4197,28 +4197,28 @@ static void ixj_aec_start(IXJ *j, int level)
 			/* Now we can set the AGC initial parameters and turn it on */
 			ixj_WriteDSPCommand(0xCF90, j);	/* Set AGC Minimum gain */
 			ixj_WriteDSPCommand(0x0020, j);	/* to 0.125 (-18dB) */
-	
+
 			ixj_WriteDSPCommand(0xCF91, j);	/* Set AGC Maximum gain */
 			ixj_WriteDSPCommand(0x1000, j);	/* to 16 (24dB) */
-			
+
 			ixj_WriteDSPCommand(0xCF92, j);	/* Set AGC start gain */
 			ixj_WriteDSPCommand(0x0800, j);	/* to 8 (+18dB) */
-		
+
 			ixj_WriteDSPCommand(0xCF93, j);	/* Set AGC hold time */
 			ixj_WriteDSPCommand(0x1F40, j);	/* to 2 seconds (units are 250us) */
-			
+
 			ixj_WriteDSPCommand(0xCF94, j);	/* Set AGC Attack Time Constant */
 			ixj_WriteDSPCommand(0x0005, j);	/* to 8ms */
-			
+
 			ixj_WriteDSPCommand(0xCF95, j);	/* Set AGC Decay Time Constant */
 			ixj_WriteDSPCommand(0x000D, j);	/* to 4096ms */
-			
+
 			ixj_WriteDSPCommand(0xCF96, j);	/* Set AGC Attack Threshold */
 			ixj_WriteDSPCommand(0x1200, j);	/* to 25% */
-			
+
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0001, j);	/* to on */
-			
+
 			break;
 
 		case AEC_AUTO:
@@ -4495,7 +4495,7 @@ static int ixj_play_start(IXJ *j)
 		return -ENOMEM;
 	}
 /*	j->write_buffers_empty = 2; */
-	j->write_buffers_empty = 1; 
+	j->write_buffers_empty = 1;
 	j->write_buffer_size = j->play_frame_size * 2;
 	j->write_buffer_end = j->write_buffer + j->play_frame_size * 2;
 	j->write_buffer_rp = j->write_buffer_wp = j->write_buffer;
@@ -6465,9 +6465,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		ixj_ringback(j);
 		break;
 	case PHONE_WINK:
-		if(j->cardtype == QTI_PHONEJACK) 
+		if(j->cardtype == QTI_PHONEJACK)
 			retval = -1;
-		else 
+		else
 			retval = ixj_wink(j);
 		break;
 	case PHONE_CPT_STOP:
@@ -6553,7 +6553,7 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		ixj_write_vmwi(j, arg);
 		break;
 	case IXJCTL_CID:
-		if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID))) 
+		if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID)))
 			retval = -EFAULT;
 		j->ex.bits.caller_id = 0;
 		break;
@@ -6575,13 +6575,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		break;
 	case PHONE_CAPABILITIES_LIST:
 		add_caps(j);
-		if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps)) 
+		if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps))
 			retval = -EFAULT;
 		break;
 	case PHONE_CAPABILITIES_CHECK:
 		{
 			struct phone_capability cap;
-			if (copy_from_user(&cap, argp, sizeof(cap))) 
+			if (copy_from_user(&cap, argp, sizeof(cap)))
 				retval = -EFAULT;
 			else {
 				add_caps(j);
@@ -6597,13 +6597,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		j->ex.bits.pstn_ring = 0;
 		break;
 	case IXJCTL_SET_FILTER:
-		if (copy_from_user(&jf, argp, sizeof(jf))) 
+		if (copy_from_user(&jf, argp, sizeof(jf)))
 			retval = -EFAULT;
 		else
 			retval = ixj_init_filter(j, &jf);
 		break;
 	case IXJCTL_SET_FILTER_RAW:
-		if (copy_from_user(&jfr, argp, sizeof(jfr))) 
+		if (copy_from_user(&jfr, argp, sizeof(jfr)))
 			retval = -EFAULT;
 		else
 			retval = ixj_init_filter_raw(j, &jfr);
@@ -6638,9 +6638,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 				raise *= 2;
 			}
 			if(j->sigdef.signal)
-				j->ex_sig.bytes |= raise; 
+				j->ex_sig.bytes |= raise;
 			else
-				j->ex_sig.bytes &= (raise^0xffff); 
+				j->ex_sig.bytes &= (raise^0xffff);
 		}
 		break;
 	case IXJCTL_INTERCOM_STOP:
@@ -7040,9 +7040,9 @@ static int ixj_selfprobe(IXJ *j)
 
 	/* initialise the DTMF prescale to a sensible value */
 	if (j->cardtype == QTI_LINEJACK) {
-		set_dtmf_prescale(j, 0x10); 
+		set_dtmf_prescale(j, 0x10);
 	} else {
-		set_dtmf_prescale(j, 0x40); 
+		set_dtmf_prescale(j, 0x40);
 	}
 	set_play_volume(j, 0x100);
 	set_rec_volume(j, 0x100);
@@ -7095,15 +7095,15 @@ static int ixj_selfprobe(IXJ *j)
 		j->ixj_signals[cnt] = SIGIO;
 
 	/* Set the excetion signal enable flags */
-	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = 
-	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = 
+	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
+	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
 	j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
 #ifdef IXJ_DYN_ALLOC
 	j->fskdata = NULL;
 #endif
 	j->fskdcnt = 0;
 	j->cidcw_wait = 0;
- 
+
 	/* Register with the Telephony for Linux subsystem */
 	j->p.f_op = &ixj_fops;
 	j->p.open = ixj_open;
@@ -7118,7 +7118,7 @@ static int ixj_selfprobe(IXJ *j)
 /*
  *	Exported service for pcmcia card handling
  */
- 
+
 IXJ *ixj_pcmcia_probe(unsigned long dsp, unsigned long xilinx)
 {
 	IXJ *j = ixj_alloc();
@@ -7320,7 +7320,7 @@ static int ixj_get_status_proc(char *buf)
 			len += sprintf(buf + len, "\nRec volume 0x%x", get_rec_volume(j));
 			len += sprintf(buf + len, "\nPlay volume 0x%x", get_play_volume(j));
 			len += sprintf(buf + len, "\nDTMF prescale 0x%x", get_dtmf_prescale(j));
-			
+
 			len += sprintf(buf + len, "\nHook state %d", j->hookstate); /* j->r_hook);	*/
 
 			if (j->cardtype == QTI_LINEJACK) {
@@ -7417,7 +7417,7 @@ static int ixj_get_status_proc(char *buf)
                         len += sprintf(buf + len, "\nPControl Wait Fails %ld", j->pcontrolwaitfail);
                         len += sprintf(buf + len, "\nIs Control Ready Checks %ld", j->iscontrolready);
                         len += sprintf(buf + len, "\nIs Control Ready Check failures %ld", j->iscontrolreadyfail);
- 
+
 #endif
 			len += sprintf(buf + len, "\n");
 		}
@@ -7608,7 +7608,7 @@ static IXJ *new_ixj(unsigned long port)
 }
 
 static int __init ixj_probe_isapnp(int *cnt)
-{               
+{
 	int probe = 0;
 	int func = 0x110;
         struct pnp_dev *dev = NULL, *old_dev = NULL;
@@ -7686,7 +7686,7 @@ static int __init ixj_probe_isapnp(int *cnt)
 	}
 	return probe;
 }
-                        
+
 static int __init ixj_probe_isa(int *cnt)
 {
 	int i, probe;
@@ -7713,7 +7713,7 @@ static int __init ixj_probe_isa(int *cnt)
 
 static int __init ixj_probe_pci(int *cnt)
 {
-	struct pci_dev *pci = NULL;   
+	struct pci_dev *pci = NULL;
 	int i, probe = 0;
 	IXJ *j = NULL;
 
@@ -7745,7 +7745,7 @@ static int __init ixj_probe_pci(int *cnt)
 static int __init ixj_init(void)
 {
 	int cnt = 0;
-	int probe = 0;   
+	int probe = 0;
 
 	cnt = 0;
 
@@ -7887,7 +7887,7 @@ static void DAA_Coeff_US(IXJ *j)
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x2D; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0x62; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x2D; */
-	/* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */ 
+	/* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x2D; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0x62; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6; */
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 9b50b5bd4edb..c51f651dfd1b 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -2212,7 +2212,7 @@ void dump_dl_modules(struct bridge_dev_context *bridge_context)
 
 		if (status) {
 			pr_debug(
-			"%s: Failed to read dll_module stuct for 0x%x.\n",
+			"%s: Failed to read dll_module struct for 0x%x.\n",
 			__func__, module_dsp_addr);
 			break;
 		}
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 006ffd752895..3d28b2345fbd 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -215,7 +215,7 @@ static inline const char *event_to_string(int event)
 	case DSP_MMUFAULT: return "DSP_MMUFAULT"; break;
 	case DSP_PWRERROR: return "DSP_PWRERROR"; break;
 	case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break;
-	default: return "unkown event"; break;
+	default: return "unknown event"; break;
 	}
 }
 
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index fa870e3f7f6a..92ced35e6b7f 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -113,8 +113,8 @@ static ssize_t store_sockfd(struct device *dev, struct device_attribute *attr,
 
 		spin_unlock(&sdev->ud.lock);
 
-		sdev->ud.tcp_rx = kthread_run(stub_rx_loop, &sdev->ud, "stub_rx");
-		sdev->ud.tcp_tx = kthread_run(stub_tx_loop, &sdev->ud, "stub_tx");
+		sdev->ud.tcp_rx = kthread_get_run(stub_rx_loop, &sdev->ud, "stub_rx");
+		sdev->ud.tcp_tx = kthread_get_run(stub_tx_loop, &sdev->ud, "stub_tx");
 
 		spin_lock(&sdev->ud.lock);
 		sdev->ud.status = SDEV_ST_USED;
@@ -187,10 +187,10 @@ static void stub_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* 1. stop threads */
-	if (ud->tcp_rx && !task_is_dead(ud->tcp_rx))
-		kthread_stop(ud->tcp_rx);
-	if (ud->tcp_tx && !task_is_dead(ud->tcp_tx))
-		kthread_stop(ud->tcp_tx);
+	if (ud->tcp_rx)
+		kthread_stop_put(ud->tcp_rx);
+	if (ud->tcp_tx)
+		kthread_stop_put(ud->tcp_tx);
 
 	/*
 	 * 2. close the socket
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h
index c7b888ca54f5..5d89c0fd6f7b 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/staging/usbip/usbip_common.h
@@ -292,6 +292,23 @@ struct usbip_device {
 	} eh_ops;
 };
 
+#define kthread_get_run(threadfn, data, namefmt, ...)			   \
+({									   \
+	struct task_struct *__k						   \
+		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
+	if (!IS_ERR(__k)) {						   \
+		get_task_struct(__k);					   \
+		wake_up_process(__k);					   \
+	}								   \
+	__k;								   \
+})
+
+#define kthread_stop_put(k)		\
+	do {				\
+		kthread_stop(k);	\
+		put_task_struct(k);	\
+	} while (0)
+
 /* usbip_common.c */
 void usbip_dump_urb(struct urb *purb);
 void usbip_dump_header(struct usbip_header *pdu);
diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/staging/usbip/usbip_protocol.txt
index 0f102081e86c..16b6fe27284c 100644
--- a/drivers/staging/usbip/usbip_protocol.txt
+++ b/drivers/staging/usbip/usbip_protocol.txt
@@ -27,7 +27,7 @@ Once the client knows the list of exported USB devices it may decide to use one
 of them. First the client opens a TCP/IP connection towards the server and
 sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
 import was successful the TCP/IP connection remains open and will be used
-to trasfer the URB traffic between the client and the server. The client may
+to transfer the URB traffic between the client and the server. The client may
 send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
 USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
 server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
index 269787751b20..0958ba53e94a 100644
--- a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
+++ b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
@@ -59,7 +59,10 @@ static int parse_status(char *value)
 
 
 	/* skip a header line */
-	c = strchr(value, '\n') + 1;
+	c = strchr(value, '\n');
+	if (!c)
+		return -1;
+	c++;
 
 	while (*c != '\0') {
 		int port, status, speed, devid;
@@ -109,7 +112,10 @@ static int parse_status(char *value)
 
 
 		/* go to the next line */
-		c = strchr(c, '\n') + 1;
+		c = strchr(c, '\n');
+		if (!c)
+			break;
+		c++;
 	}
 
 	dbg("exit");
@@ -264,11 +270,17 @@ static int get_nports(void)
 	    attr_status->method, attr_status->value);
 
 	/* skip a header line */
-	c = strchr(attr_status->value, '\n') + 1;
+	c = strchr(attr_status->value, '\n');
+	if (!c)
+		return 0;
+	c++;
 
 	while (*c != '\0') {
 		/* go to the next line */
-		c = strchr(c, '\n') + 1;
+		c = strchr(c, '\n');
+		if (!c)
+			return nports;
+		c++;
 		nports += 1;
 	}
 
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index dca9bf11f0c2..f708cbaee16b 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -821,10 +821,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	if (vdev->ud.tcp_rx && !task_is_dead(vdev->ud.tcp_rx))
-		kthread_stop(vdev->ud.tcp_rx);
-	if (vdev->ud.tcp_tx && !task_is_dead(vdev->ud.tcp_tx))
-		kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop_put(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop_put(vdev->ud.tcp_tx);
 
 	pr_info("stop threads\n");
 
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index f5fba7320c5a..f0eaf04fa25b 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -162,7 +162,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev,
 		 * already received the result of its submit result and gave
 		 * back the URB.
 		 */
-		pr_info("the urb (seqnum %d) was already given backed\n",
+		pr_info("the urb (seqnum %d) was already given back\n",
 			pdu->base.seqnum);
 	} else {
 		usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 0cd039bb5fd6..7ce9c2f7e442 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -222,8 +222,8 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
-	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+	vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
 
 	rh_port_connect(rhport, speed);
 
diff --git a/drivers/staging/vme/Makefile b/drivers/staging/vme/Makefile
index b4ea3f8d0a50..accdb72e39e2 100644
--- a/drivers/staging/vme/Makefile
+++ b/drivers/staging/vme/Makefile
@@ -1,8 +1 @@
-#
-# Makefile for the VME bridge device drivers.
-#
-obj-$(CONFIG_VME_BUS)		+= vme.o
-
-obj-y				+= bridges/
 obj-y				+= devices/
-obj-y				+= boards/
diff --git a/drivers/staging/vme/TODO b/drivers/staging/vme/TODO
deleted file mode 100644
index 79f00333e7ef..000000000000
--- a/drivers/staging/vme/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-				TODO
-				====
-
-- Add one or more device drivers which use the VME framework.
-
diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig
index 55ec30cb1fa2..d0cab1766190 100644
--- a/drivers/staging/vme/devices/Kconfig
+++ b/drivers/staging/vme/devices/Kconfig
@@ -2,6 +2,7 @@ comment "VME Device Drivers"
 
 config VME_USER
 	tristate "VME user space access driver"
+	depends on STAGING
 	help
 	  If you say Y here you want to be able to access a limited number of
 	  VME windows in a manner at least semi-compatible with the interface
@@ -9,7 +10,7 @@ config VME_USER
 
 config VME_PIO2
 	tristate "GE PIO2 VME"
-	depends on GPIOLIB
+	depends on STAGING && GPIOLIB
 	help
 	  Say Y here to include support for the GE PIO2. The PIO2 is a 6U VME
 	  slave card, implementing 32 solid-state relay switched IO lines, in
diff --git a/drivers/staging/vme/devices/vme_pio2_cntr.c b/drivers/staging/vme/devices/vme_pio2_cntr.c
index 08e0d59806ca..6335471faa36 100644
--- a/drivers/staging/vme/devices/vme_pio2_cntr.c
+++ b/drivers/staging/vme/devices/vme_pio2_cntr.c
@@ -17,8 +17,8 @@
 #include <linux/device.h>
 #include <linux/types.h>
 #include <linux/gpio.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 static int pio2_cntr_irq_set(struct pio2_card *card, int id)
diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c
index 573c80003f0c..4bf8e05ac312 100644
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ b/drivers/staging/vme/devices/vme_pio2_core.c
@@ -10,7 +10,6 @@
  * option) any later version.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -20,8 +19,8 @@
 #include <linux/ctype.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 
diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c
index 858484915f08..ad76a477825b 100644
--- a/drivers/staging/vme/devices/vme_pio2_gpio.c
+++ b/drivers/staging/vme/devices/vme_pio2_gpio.c
@@ -10,7 +10,6 @@
  * option) any later version.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -21,8 +20,8 @@
 #include <linux/ctype.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 static const char driver_name[] = "pio2_gpio";
@@ -79,7 +78,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
 		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 
-		dev_err(&card->vdev->dev, "Channel not availabe as output\n");
+		dev_err(&card->vdev->dev, "Channel not available as output\n");
 		return;
 	}
 
diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c
index 7dcd1622b5f5..e24a6f95db12 100644
--- a/drivers/staging/vme/devices/vme_user.c
+++ b/drivers/staging/vme/devices/vme_user.c
@@ -27,7 +27,7 @@
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/pci.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/syscalls.h>
@@ -36,8 +36,8 @@
 
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_user.h"
 
 static DEFINE_MUTEX(vme_user_mutex);
@@ -95,7 +95,7 @@ struct image_desc {
 	void *kern_buf;	/* Buffer address in kernel space */
 	dma_addr_t pci_buf;	/* Buffer address in PCI address space */
 	unsigned long long size_buf;	/* Buffer size */
-	struct semaphore sem;	/* Semaphore for locking image */
+	struct mutex mutex;	/* Mutex for locking image */
 	struct device *device;	/* Sysfs device */
 	struct vme_resource *resource;	/* VME resource */
 	int users;		/* Number of current users */
@@ -168,7 +168,7 @@ static int vme_user_open(struct inode *inode, struct file *file)
 	int err;
 	unsigned int minor = MINOR(inode->i_rdev);
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 	/* Allow device to be opened if a resource is needed and allocated. */
 	if (minor < CONTROL_MINOR && image[minor].resource == NULL) {
 		printk(KERN_ERR "No resources allocated for device\n");
@@ -179,12 +179,12 @@ static int vme_user_open(struct inode *inode, struct file *file)
 	/* Increment user count */
 	image[minor].users++;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return 0;
 
 err_res:
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return err;
 }
@@ -193,12 +193,12 @@ static int vme_user_release(struct inode *inode, struct file *file)
 {
 	unsigned int minor = MINOR(inode->i_rdev);
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	/* Decrement user count */
 	image[minor].users--;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return 0;
 }
@@ -325,14 +325,14 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count,
 	if (minor == CONTROL_MINOR)
 		return 0;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	/* XXX Do we *really* want this helper - we can use vme_*_get ? */
 	image_size = vme_get_size(image[minor].resource);
 
 	/* Ensure we are starting at a valid location */
 	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return 0;
 	}
 
@@ -353,8 +353,7 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count,
 		retval = -EINVAL;
 	}
 
-	up(&image[minor].sem);
-
+	mutex_unlock(&image[minor].mutex);
 	if (retval > 0)
 		*ppos += retval;
 
@@ -372,13 +371,13 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf,
 	if (minor == CONTROL_MINOR)
 		return 0;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	image_size = vme_get_size(image[minor].resource);
 
 	/* Ensure we are starting at a valid location */
 	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return 0;
 	}
 
@@ -398,8 +397,8 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf,
 	default:
 		retval = -EINVAL;
 	}
-
-	up(&image[minor].sem);
+	
+	mutex_unlock(&image[minor].mutex);
 
 	if (retval > 0)
 		*ppos += retval;
@@ -416,7 +415,7 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence)
 	if (minor == CONTROL_MINOR)
 		return -EINVAL;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 	image_size = vme_get_size(image[minor].resource);
 
 	switch (whence) {
@@ -430,19 +429,19 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence)
 		absolute = image_size + off;
 		break;
 	default:
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return -EINVAL;
 		break;
 	}
 
 	if ((absolute < 0) || (absolute >= image_size)) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return -EINVAL;
 	}
 
 	file->f_pos = absolute;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return absolute;
 }
@@ -696,7 +695,7 @@ static int __devinit vme_user_probe(struct vme_dev *vdev)
 	for (i = 0; i < VME_DEVS; i++) {
 		image[i].kern_buf = NULL;
 		image[i].pci_buf = 0;
-		sema_init(&image[i].sem, 1);
+		mutex_init(&image[i].mutex);
 		image[i].device = NULL;
 		image[i].resource = NULL;
 		image[i].users = 0;
@@ -858,8 +857,10 @@ static int __devexit vme_user_remove(struct vme_dev *dev)
 	int i;
 
 	/* Remove sysfs Entries */
-	for (i = 0; i < VME_DEVS; i++)
+	for (i = 0; i < VME_DEVS; i++) {
+		mutex_destroy(&image[i].mutex);
 		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
+	}
 	class_destroy(vme_user_sysfs_class);
 
 	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) {
diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c
index 61ac46fa505e..0afb9fe0379a 100644
--- a/drivers/staging/vt6655/wpa.c
+++ b/drivers/staging/vt6655/wpa.c
@@ -148,7 +148,7 @@ WPA_ParseRSN (
         {
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
-            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(unsigned char)); i++) {
+            for(i = 0; (i < pRSN->wPKCount) && (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -180,7 +180,7 @@ WPA_ParseRSN (
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
-            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(unsigned char)); i++) {
+            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c
index d59456c29df1..5b9a84f95185 100644
--- a/drivers/staging/vt6656/ioctl.c
+++ b/drivers/staging/vt6656/ioctl.c
@@ -90,18 +90,17 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 		spin_lock_irq(&pDevice->lock);
 
 		if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0)
-			BSSvClearBSSList((void *)pDevice, FALSE);
+			BSSvClearBSSList(pDevice, FALSE);
 		else
-			BSSvClearBSSList((void *)pDevice, pDevice->bLinkPass);
+			BSSvClearBSSList(pDevice, pDevice->bLinkPass);
 
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_BSS_SCAN..begin\n");
 
 		if (pItemSSID->len != 0)
-			bScheduleCommand((void *)pDevice,
-					 WLAN_CMD_BSSID_SCAN,
+			bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
 					 abyScanSSID);
 		else
-			bScheduleCommand((void *) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+			bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, NULL);
 
 		spin_unlock_irq(&pDevice->lock);
 		break;
@@ -150,6 +149,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			}
 		}
 		break;
+
 	case WLAN_CMD_BSS_JOIN:
 		if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) {
 			result = -EFAULT;
@@ -190,10 +190,9 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 		netif_stop_queue(pDevice->dev);
 		spin_lock_irq(&pDevice->lock);
 		pMgmt->eCurrState = WMAC_STATE_IDLE;
-		bScheduleCommand((void *) pDevice,
-				 WLAN_CMD_BSSID_SCAN,
+		bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
 				 pMgmt->abyDesireSSID);
-		bScheduleCommand((void *) pDevice, WLAN_CMD_SSID, NULL);
+		bScheduleCommand(pDevice, WLAN_CMD_SSID, NULL);
 		spin_unlock_irq(&pDevice->lock);
 		break;
 
@@ -299,7 +298,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			result = -EINVAL;
 			break;
 		}
-		pList = (PSBSSIDList)kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), (int)GFP_ATOMIC);
+		pList = kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), GFP_ATOMIC);
 		if (pList == NULL) {
 			result = -ENOMEM;
 			break;
@@ -313,7 +312,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 				pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval;
 				pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo;
 				RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
-				pList->sBSSIDList[ii].uRSSI = (unsigned int) ldBm;
+				pList->sBSSIDList[ii].uRSSI = (unsigned int)ldBm;
 				/* pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI; */
 				memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN);
 				pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
@@ -356,6 +355,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			break;
 		}
 		break;
+
 	case WLAN_CMD_STOP_MAC:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_STOP_MAC\n");
 		/* Todo xxxxxx */
@@ -534,7 +534,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 
 		netif_stop_queue(pDevice->dev);
 		spin_lock_irq(&pDevice->lock);
-		bScheduleCommand((void *)pDevice, WLAN_CMD_RUN_AP, NULL);
+		bScheduleCommand(pDevice, WLAN_CMD_RUN_AP, NULL);
 		spin_unlock_irq(&pDevice->lock);
 		break;
 
@@ -565,7 +565,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			result = -ENOMEM;
 			break;
 		}
-		pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC);
+		pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), GFP_ATOMIC);
 		if (pNodeList == NULL) {
 			result = -ENOMEM;
 			break;
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 763e028a5cc5..ee5261a36886 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1257,9 +1257,7 @@ static void __devexit vt6656_disconnect(struct usb_interface *intf)
 	}
 
 	device_release_WPADEV(device);
-
-	if (device->firmware)
-		release_firmware(device->firmware);
+	release_firmware(device->firmware);
 
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(interface_to_usbdev(intf));
diff --git a/drivers/staging/vt6656/wpa.c b/drivers/staging/vt6656/wpa.c
index 7dde3d6941ab..b16d4ddc117b 100644
--- a/drivers/staging/vt6656/wpa.c
+++ b/drivers/staging/vt6656/wpa.c
@@ -149,7 +149,7 @@ WPA_ParseRSN(
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
 	    for (i = 0; (i < pRSN->wPKCount) &&
-		   (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
+		   (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -182,7 +182,7 @@ WPA_ParseRSN(
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
 	    for (i = 0; (i < pIE_RSN_Auth->wAuthCount) &&
-		   (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
+		   (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
diff --git a/drivers/staging/wlags49_h2/README.ubuntu b/drivers/staging/wlags49_h2/README.ubuntu
index edee8b9385be..5f1cfb8fd427 100644
--- a/drivers/staging/wlags49_h2/README.ubuntu
+++ b/drivers/staging/wlags49_h2/README.ubuntu
@@ -87,7 +87,7 @@ The linux driver files (wl_xxxx.c) are changed in the following ways:
 -- Recovery actions added
 
 The major problem was the order in which calls can be made. The original
-looks like a traditonal UNIX driver. To call an "ioctl" function you
+looks like a traditional UNIX driver. To call an "ioctl" function you
 have to "open" the device first to get a handle and after "close" no
 "ioctl" function can be called anymore. With the 2.6 driver this all
 changed; the former ioctl functions are now called before "open" and
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index 90820ff1aced..824b85232353 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1063,7 +1063,7 @@ void wl_multicast( struct net_device *dev )
 #if DBG
     if( DBG_FLAGS( DbgInfo ) & DBG_PARAM_ON ) {
         DBG_PRINT("  flags: %s%s%s\n",
-            ( dev->flags & IFF_PROMISC ) ? "Promiscous " : "",
+            ( dev->flags & IFF_PROMISC ) ? "Promiscuous " : "",
             ( dev->flags & IFF_MULTICAST ) ? "Multicast " : "",
             ( dev->flags & IFF_ALLMULTI ) ? "All-Multicast" : "" );
 
@@ -1510,8 +1510,11 @@ void wl_wds_device_alloc( struct wl_private *lp )
     for( count = 0; count < NUM_WDS_PORTS; count++ ) {
         struct net_device *dev_wds = NULL;
 
-        dev_wds = kmalloc( sizeof( struct net_device ), GFP_KERNEL );
-        memset( dev_wds, 0, sizeof( struct net_device ));
+	dev_wds = kzalloc(sizeof(struct net_device), GFP_KERNEL);
+	if (!dev_wds) {
+		DBG_LEAVE(DbgInfo);
+		return;
+	}
 
         ether_setup( dev_wds );
 
diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
index 3df990c7306a..0b31b01bd490 100644
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ b/drivers/staging/wlags49_h2/wl_pci.c
@@ -524,6 +524,7 @@ int wl_pci_setup( struct pci_dev *pdev )
     /* Make sure that space was allocated for our private adapter struct */
     if( dev->priv == NULL ) {
         DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" );
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return -ENOMEM;
     }
@@ -532,6 +533,7 @@ int wl_pci_setup( struct pci_dev *pdev )
     /* Allocate DMA Descriptors */
     if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) {
         DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" );
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return -ENOMEM;
     }
@@ -561,6 +563,8 @@ int wl_pci_setup( struct pci_dev *pdev )
     result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev);
     if( result ) {
         DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" );
+	wl_remove(dev);
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return result;
 	}
diff --git a/drivers/staging/wlags49_h2/wl_profile.c b/drivers/staging/wlags49_h2/wl_profile.c
index b8c96cf18de5..0e49272bc7a8 100644
--- a/drivers/staging/wlags49_h2/wl_profile.c
+++ b/drivers/staging/wlags49_h2/wl_profile.c
@@ -401,7 +401,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 			lp->brsc[0] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_2GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_2GHZ);
 	} else if (strcmp(key, PARM_NAME_BRSC_5GHZ) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_5GHZ, value);
 
@@ -409,7 +409,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 			lp->brsc[1] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_5GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_5GHZ);
 	} else if ((strcmp(key, PARM_NAME_DESIRED_SSID) == 0) || (strcmp(key, PARM_NAME_OWN_SSID) == 0)) {
 		DBG_TRACE(DbgInfo, "SSID, value: %s\n", value);
 
@@ -556,7 +556,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 			lp->srsc[0] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_2GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_2GHZ);
 	} else if (strcmp(key, PARM_NAME_SRSC_5GHZ) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_5GHZ, value);
 
@@ -564,7 +564,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 			lp->srsc[1] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_5GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_5GHZ);
 	} else if (strcmp(key, PARM_NAME_SYSTEM_SCALE) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SYSTEM_SCALE, value);
 
diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c
index f104e6f1e980..404ec7da0348 100644
--- a/drivers/staging/wlags49_h2/wl_util.c
+++ b/drivers/staging/wlags49_h2/wl_util.c
@@ -98,8 +98,7 @@
  ******************************************************************************/
 
 /* A matrix which maps channels to frequencies */
-#define MAX_CHAN_FREQ_MAP_ENTRIES   50
-static const long chan_freq_list[][MAX_CHAN_FREQ_MAP_ENTRIES] =
+static const long chan_freq_list[][2] =
 {
     {1,2412},
     {2,2417},
@@ -846,7 +845,7 @@ int wl_is_a_valid_chan( int channel )
     }
 
     /* Iterate through the matrix and retrieve the frequency */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][0] == channel ) {
             return 1;
         }
@@ -884,7 +883,7 @@ int wl_is_a_valid_freq( long frequency )
 
 
     /* Iterate through the matrix and retrieve the channel */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][1] == frequency ) {
             return 1;
         }
@@ -927,7 +926,7 @@ long wl_get_freq_from_chan( int channel )
     }
 
     /* Iterate through the matrix and retrieve the frequency */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][0] == channel ) {
             return chan_freq_list[i][1];
         }
@@ -965,7 +964,7 @@ int wl_get_chan_from_freq( long frequency )
 
 
     /* Iterate through the matrix and retrieve the channel */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][1] == frequency ) {
             return chan_freq_list[i][0];
         }
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 4cd3ba5d5646..8bc562b8c4d9 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -332,6 +332,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct p80211msg_dot11req_scan msg1;
 	struct p80211msg_dot11req_scan_results msg2;
+	struct cfg80211_bss *bss;
 	int result;
 	int err = 0;
 	int numbss = 0;
@@ -401,7 +402,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 		ie_buf[1] = msg2.ssid.data.len;
 		ie_len = ie_buf[1] + 2;
 		memcpy(&ie_buf[2], &(msg2.ssid.data.data), msg2.ssid.data.len);
-		cfg80211_inform_bss(wiphy,
+		bss = cfg80211_inform_bss(wiphy,
 			ieee80211_get_channel(wiphy, ieee80211_dsss_chan_to_freq(msg2.dschannel.data)),
 			(const u8 *) &(msg2.bssid.data.data),
 			msg2.timestamp.data, msg2.capinfo.data,
@@ -411,6 +412,13 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 			(msg2.signal.data - 65536) * 100, /* Conversion to signed type */
 			GFP_KERNEL
 		);
+
+		if (!bss) {
+			err = -ENOMEM;
+			goto exit;
+		}
+
+		cfg80211_put_bss(bss);
 	}
 
 	if (result)
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index c3bb05dd744f..4efa9bc0fcf0 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -380,8 +380,8 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 	}
 
 	count = (hw->scanresults->framelen - 3) / 32;
-	if (count > 32)
-		count = 32;
+	if (count > HFA384x_SCANRESULT_MAX)
+		count = HFA384x_SCANRESULT_MAX;
 
 	if (req->bssindex.data >= count) {
 		pr_debug("requested index (%d) out of range (%d)\n",
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
index e828fd403c35..9c62aeb9ede9 100644
--- a/drivers/staging/xgifb/XGI_main.h
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -12,9 +12,6 @@
 
 #define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while (0)
 
-#ifndef PCI_DEVICE_ID_XGI_41
-#define PCI_DEVICE_ID_XGI_41      0x041
-#endif
 #ifndef PCI_DEVICE_ID_XGI_42
 #define PCI_DEVICE_ID_XGI_42      0x042
 #endif
@@ -82,177 +79,79 @@ static int XGIfb_tvplug = -1;
 /* TW: For ioctl XGIFB_GET_INFO */
 /* XGIfb_info XGIfbinfo; */
 
-#define MD_XGI300 1
-#define MD_XGI315 2
+#define MD_XGI315 1
 
 /* mode table */
 static const struct _XGIbios_mode {
-	char name[15];
 	u8 mode_no;
 	u16 vesa_mode_no_1;  /* "XGI defined" VESA mode number */
 	u16 vesa_mode_no_2;  /* Real VESA mode numbers */
 	u16 xres;
 	u16 yres;
 	u16 bpp;
-	u16 rate_idx;
-	u16 cols;
-	u16 rows;
 	u8  chipset;
 } XGIbios_mode[] = {
-	{"320x240x16",   0x56, 0x0000, 0x0000,  320,  240, 16, 1,  40, 15,
-	 MD_XGI315},
-	{"320x480x8",    0x5A, 0x0000, 0x0000,  320,  480,  8, 1,  40, 30,
-	 MD_XGI315},  /* TW: FSTN */
-	{"320x480x16",   0x5B, 0x0000, 0x0000,  320,  480, 16, 1,  40, 30,
-	 MD_XGI315},  /* TW: FSTN */
-	{"640x480x8",    0x2E, 0x0101, 0x0101,  640,  480,  8, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"640x480x16",   0x44, 0x0111, 0x0111,  640,  480, 16, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"640x480x24",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},  /* TW: That's for people who mix up color-
-					and fb depth */
-	{"640x480x32",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x8",    0x31, 0x0000, 0x0000,  720,  480,  8, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x16",   0x33, 0x0000, 0x0000,  720,  480, 16, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x24",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x32",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x8",    0x32, 0x0000, 0x0000,  720,  576,  8, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x16",   0x34, 0x0000, 0x0000,  720,  576, 16, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x24",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x32",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x8",    0x70, 0x0000, 0x0000,  800,  480,  8, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x16",   0x7a, 0x0000, 0x0000,  800,  480, 16, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x24",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x32",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x8",    0x30, 0x0103, 0x0103,  800,  600,  8, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-#define DEFAULT_MODE              20 /* index for 800x600x16 */
-	{"800x600x16",   0x47, 0x0114, 0x0114,  800,  600, 16, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x24",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x32",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x8",   0x71, 0x0000, 0x0000, 1024,  576,  8, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x16",  0x74, 0x0000, 0x0000, 1024,  576, 16, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x24",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x32",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x600x8",   0x20, 0x0000, 0x0000, 1024,  600,  8, 1, 128, 37,
-	 MD_XGI300          },  /* TW: 300 series only */
-	{"1024x600x16",  0x21, 0x0000, 0x0000, 1024,  600, 16, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x600x24",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x600x32",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x768x8",   0x38, 0x0105, 0x0105, 1024,  768,  8, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x16",  0x4A, 0x0117, 0x0117, 1024,  768, 16, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x24",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x32",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1152x768x8",   0x23, 0x0000, 0x0000, 1152,  768,  8, 1, 144, 48,
-	 MD_XGI300          },  /* TW: 300 series only */
-	{"1152x768x16",  0x24, 0x0000, 0x0000, 1152,  768, 16, 1, 144, 48,
-	 MD_XGI300          },
-	{"1152x768x24",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48,
-	 MD_XGI300          },
-	{"1152x768x32",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48,
-	 MD_XGI300          },
-	{"1280x720x8",   0x79, 0x0000, 0x0000, 1280,  720,  8, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x16",  0x75, 0x0000, 0x0000, 1280,  720, 16, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x24",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x32",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x768x8",   0x23, 0x0000, 0x0000, 1280,  768,  8, 1, 160, 48,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"1280x768x16",  0x24, 0x0000, 0x0000, 1280,  768, 16, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x768x24",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x768x32",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x960x8",   0x7C, 0x0000, 0x0000, 1280,  960,  8, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x16",  0x7D, 0x0000, 0x0000, 1280,  960, 16, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x24",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x32",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x8",  0x3A, 0x0107, 0x0107, 1280, 1024,  8, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1400x1050x8",  0x26, 0x0000, 0x0000, 1400, 1050,  8, 1, 175, 65,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65,
-	 MD_XGI315},
-	{"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,
-	 MD_XGI315},
-	{"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,
-	 MD_XGI315},
-	{"1600x1200x8",  0x3C, 0x0130, 0x011c, 1600, 1200,  8, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x8",  0x68, 0x013f, 0x0000, 1920, 1440,  8, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"2048x1536x8",  0x6c, 0x0000, 0x0000, 2048, 1536,  8, 1, 256, 96,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96,
-	 MD_XGI315},
-	{"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,
-	 MD_XGI315},
-	{"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,
-	 MD_XGI315},
-	{"\0", 0x00, 0, 0, 0, 0, 0, 0, 0}
+	{ 0x56, 0x0000, 0x0000,  320,  240, 16, MD_XGI315 },
+	{ 0x5A, 0x0000, 0x0000,  320,  480,  8, MD_XGI315 },
+	{ 0x5B, 0x0000, 0x0000,  320,  480, 16, MD_XGI315 },
+	{ 0x2E, 0x0101, 0x0101,  640,  480,  8, MD_XGI315 },
+	{ 0x44, 0x0111, 0x0111,  640,  480, 16, MD_XGI315 },
+	{ 0x62, 0x013a, 0x0112,  640,  480, 32, MD_XGI315 },
+	{ 0x31, 0x0000, 0x0000,  720,  480,  8, MD_XGI315 },
+	{ 0x33, 0x0000, 0x0000,  720,  480, 16, MD_XGI315 },
+	{ 0x35, 0x0000, 0x0000,  720,  480, 32, MD_XGI315 },
+	{ 0x32, 0x0000, 0x0000,  720,  576,  8, MD_XGI315 },
+	{ 0x34, 0x0000, 0x0000,  720,  576, 16, MD_XGI315 },
+	{ 0x36, 0x0000, 0x0000,  720,  576, 32, MD_XGI315 },
+	{ 0x36, 0x0000, 0x0000,  720,  576, 32, MD_XGI315 },
+	{ 0x70, 0x0000, 0x0000,  800,  480,  8, MD_XGI315 },
+	{ 0x7a, 0x0000, 0x0000,  800,  480, 16, MD_XGI315 },
+	{ 0x76, 0x0000, 0x0000,  800,  480, 32, MD_XGI315 },
+	{ 0x30, 0x0103, 0x0103,  800,  600,  8, MD_XGI315 },
+#define DEFAULT_MODE              17 /* index for 800x600x16 */
+	{ 0x47, 0x0114, 0x0114,  800,  600, 16, MD_XGI315 },
+	{ 0x63, 0x013b, 0x0115,  800,  600, 32, MD_XGI315 },
+	{ 0x71, 0x0000, 0x0000, 1024,  576,  8, MD_XGI315 },
+	{ 0x74, 0x0000, 0x0000, 1024,  576, 16, MD_XGI315 },
+	{ 0x77, 0x0000, 0x0000, 1024,  576, 32, MD_XGI315 },
+	{ 0x77, 0x0000, 0x0000, 1024,  576, 32, MD_XGI315 },
+	{ 0x20, 0x0000, 0x0000, 1024,  600,  8, },
+	{ 0x21, 0x0000, 0x0000, 1024,  600, 16, },
+	{ 0x22, 0x0000, 0x0000, 1024,  600, 32, },
+	{ 0x38, 0x0105, 0x0105, 1024,  768,  8, MD_XGI315 },
+	{ 0x4A, 0x0117, 0x0117, 1024,  768, 16, MD_XGI315 },
+	{ 0x64, 0x013c, 0x0118, 1024,  768, 32, MD_XGI315 },
+	{ 0x64, 0x013c, 0x0118, 1024,  768, 32, MD_XGI315 },
+	{ 0x23, 0x0000, 0x0000, 1152,  768,  8, },
+	{ 0x24, 0x0000, 0x0000, 1152,  768, 16, },
+	{ 0x25, 0x0000, 0x0000, 1152,  768, 32, },
+	{ 0x79, 0x0000, 0x0000, 1280,  720,  8, MD_XGI315 },
+	{ 0x75, 0x0000, 0x0000, 1280,  720, 16, MD_XGI315 },
+	{ 0x78, 0x0000, 0x0000, 1280,  720, 32, MD_XGI315 },
+	{ 0x23, 0x0000, 0x0000, 1280,  768,  8, MD_XGI315 },
+	{ 0x24, 0x0000, 0x0000, 1280,  768, 16, MD_XGI315 },
+	{ 0x25, 0x0000, 0x0000, 1280,  768, 32, MD_XGI315 },
+	{ 0x7C, 0x0000, 0x0000, 1280,  960,  8, MD_XGI315 },
+	{ 0x7D, 0x0000, 0x0000, 1280,  960, 16, MD_XGI315 },
+	{ 0x7E, 0x0000, 0x0000, 1280,  960, 32, MD_XGI315 },
+	{ 0x3A, 0x0107, 0x0107, 1280, 1024,  8, MD_XGI315 },
+	{ 0x4D, 0x011a, 0x011a, 1280, 1024, 16, MD_XGI315 },
+	{ 0x65, 0x013d, 0x011b, 1280, 1024, 32, MD_XGI315 },
+	{ 0x26, 0x0000, 0x0000, 1400, 1050,  8, MD_XGI315 },
+	{ 0x27, 0x0000, 0x0000, 1400, 1050, 16, MD_XGI315 },
+	{ 0x28, 0x0000, 0x0000, 1400, 1050, 32, MD_XGI315 },
+	{ 0x3C, 0x0130, 0x011c, 1600, 1200,  8, MD_XGI315 },
+	{ 0x3D, 0x0131, 0x011e, 1600, 1200, 16, MD_XGI315 },
+	{ 0x66, 0x013e, 0x011f, 1600, 1200, 32, MD_XGI315 },
+	{ 0x68, 0x013f, 0x0000, 1920, 1440,  8, MD_XGI315 },
+	{ 0x69, 0x0140, 0x0000, 1920, 1440, 16, MD_XGI315 },
+	{ 0x6B, 0x0141, 0x0000, 1920, 1440, 32, MD_XGI315 },
+	{ 0x6c, 0x0000, 0x0000, 2048, 1536,  8, MD_XGI315 },
+	{ 0x6d, 0x0000, 0x0000, 2048, 1536, 16, MD_XGI315 },
+	{ 0x6e, 0x0000, 0x0000, 2048, 1536, 32, MD_XGI315 },
+	{ 0 },
 };
 
-/* TW: CR36 evaluation */
-static const unsigned short XGI300paneltype[] = {
-	 LCD_UNKNOWN,  LCD_800x600, LCD_1024x768, LCD_1280x1024,
-	LCD_1280x960,  LCD_640x480, LCD_1024x600, LCD_1152x768,
-	LCD_1024x768, LCD_1024x768, LCD_1024x768,
-	LCD_1024x768, LCD_1024x768, LCD_1024x768, LCD_1024x768};
-
 static const unsigned short XGI310paneltype[] = {
 	 LCD_UNKNOWN,   LCD_800x600, LCD_1024x768, LCD_1280x1024,
 	 LCD_640x480,  LCD_1024x600, LCD_1152x864, LCD_1280x960,
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index 21c037827de4..85dbf32b1f66 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -156,25 +156,14 @@ static int XGIfb_mode_rate_to_dclock(struct vb_device_info *XGI_Pr,
 	unsigned short ModeNo = modeno;
 	unsigned short ModeIdIndex = 0, ClockIndex = 0;
 	unsigned short RefreshRateTableIndex = 0;
-
-	/* unsigned long  temp = 0; */
 	int Clock;
 	InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr);
 
+	XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr);
+
 	RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
 			ModeIdIndex, XGI_Pr);
 
-	/*
-	temp = XGI_SearchModeID(ModeNo , &ModeIdIndex,  XGI_Pr) ;
-	if (!temp) {
-		printk(KERN_ERR "Could not find mode %x\n", ModeNo);
-		return 65000;
-	}
-
-	RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
-	RefreshRateTableIndex += (rateindex - 1);
-
-	*/
 	ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
 
 	Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000;
@@ -190,7 +179,7 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 		u32 *vmode)
 {
 	unsigned short ModeNo = modeno;
-	unsigned short ModeIdIndex = 0, index = 0;
+	unsigned short ModeIdIndex, index = 0;
 	unsigned short RefreshRateTableIndex = 0;
 
 	unsigned short VRE, VBE, VRS, VBS, VDE, VT;
@@ -199,16 +188,10 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 	unsigned long cr_data3;
 	int A, B, C, D, E, F, temp, j;
 	InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr);
+	if (!XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr))
+		return 0;
 	RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
 			ModeIdIndex, XGI_Pr);
-	/*
-	temp = XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr);
-	if (!temp)
-		return 0;
-
-	RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
-	RefreshRateTableIndex += (rateindex - 1);
-	*/
 	index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
 
 	sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
@@ -219,12 +202,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 	HT = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x03) << 8);
 	A = HT + 5;
 
-	/*
-	cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
-
-	Horizontal display enable end
-	HDE = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x0C) << 6);
-	*/
 	HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) - 1;
 	E = HDE + 1;
 
@@ -358,7 +335,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 
 static void XGIRegInit(struct vb_device_info *XGI_Pr, unsigned long BaseAddr)
 {
-	XGI_Pr->RelIO = BaseAddr;
 	XGI_Pr->P3c4 = BaseAddr + 0x14;
 	XGI_Pr->P3d4 = BaseAddr + 0x24;
 	XGI_Pr->P3c0 = BaseAddr + 0x10;
@@ -414,19 +390,26 @@ static int XGIfb_GetXG21DefaultLVDSModeIdx(struct xgifb_video_info *xgifb_info)
 static void XGIfb_search_mode(struct xgifb_video_info *xgifb_info,
 			      const char *name)
 {
-	int i = 0, j = 0, l;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int bpp;
+	int i;
 
-	while (XGIbios_mode[i].mode_no != 0) {
-		l = min(strlen(name), strlen(XGIbios_mode[i].name));
-		if (!strncmp(name, XGIbios_mode[i].name, l)) {
+	if (sscanf(name, "%ux%ux%u", &xres, &yres, &bpp) != 3)
+		goto invalid_mode;
+
+	if (bpp == 24)
+		bpp = 32; /* That's for people who mix up color and fb depth. */
+
+	for (i = 0; XGIbios_mode[i].mode_no != 0; i++)
+		if (XGIbios_mode[i].xres == xres &&
+		    XGIbios_mode[i].yres == yres &&
+		    XGIbios_mode[i].bpp == bpp) {
 			xgifb_info->mode_idx = i;
-			j = 1;
-			break;
+			return;
 		}
-		i++;
-	}
-	if (!j)
-		pr_info("Invalid mode '%s'\n", name);
+invalid_mode:
+	pr_info("Invalid mode '%s'\n", name);
 }
 
 static void XGIfb_search_vesamode(struct xgifb_video_info *xgifb_info,
@@ -1088,7 +1071,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
 	unsigned int vtotal = var->upper_margin + var->yres + var->lower_margin
 			+ var->vsync_len;
 #if defined(__powerpc__)
-	u8 sr_data, cr_data;
+	u8 cr_data;
 #endif
 	unsigned int drate = 0, hrate = 0;
 	int found_mode = 0;
@@ -1162,8 +1145,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
 
 	if (XGIfb_search_refresh_rate(xgifb_info,
 				      xgifb_info->refresh_rate) == 0) {
-		xgifb_info->rate_idx =
-			XGIbios_mode[xgifb_info->mode_idx].rate_idx;
+		xgifb_info->rate_idx = 1;
 		xgifb_info->refresh_rate = 60;
 	}
 
@@ -1680,17 +1662,6 @@ static int XGIfb_get_dram_size(struct xgifb_video_info *xgifb_info)
 			ChannelNum = 1;
 		break;
 
-	case XG45:
-		if (tmp == 1)
-			ChannelNum = 2;
-		else if (tmp == 2)
-			ChannelNum = 3;
-		else if (tmp == 3)
-			ChannelNum = 4;
-		else
-			ChannelNum = 1;
-		break;
-
 	case XG40:
 	default:
 		if (tmp == 2)
@@ -1911,11 +1882,9 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	xgifb_info->mmio_base = pci_resource_start(pdev, 1);
 	xgifb_info->mmio_size = pci_resource_len(pdev, 1);
 	xgifb_info->vga_base = pci_resource_start(pdev, 2) + 0x30;
-	hw_info->pjIOAddress = (unsigned char *)xgifb_info->vga_base;
-	/* XGI_Pr.RelIO  = ioremap(pci_resource_start(pdev, 2), 128) + 0x30; */
-	pr_info("Relocate IO address: %lx [%08lx]\n",
-	       (unsigned long)pci_resource_start(pdev, 2),
-	       xgifb_info->dev_info.RelIO);
+	pr_info("Relocate IO address: %Lx [%08lx]\n",
+	       (u64) pci_resource_start(pdev, 2),
+	       xgifb_info->vga_base);
 
 	if (pci_enable_device(pdev)) {
 		ret = -EIO;
@@ -1927,7 +1896,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 		xgifb_info->display2_force = true;
 	}
 
-	XGIRegInit(&xgifb_info->dev_info, (unsigned long)hw_info->pjIOAddress);
+	XGIRegInit(&xgifb_info->dev_info, xgifb_info->vga_base);
 
 	xgifb_reg_set(XGISR, IND_SIS_PASSWORD, SIS_PASSWORD);
 	reg1 = xgifb_reg_get(XGISR, IND_SIS_PASSWORD);
@@ -1950,9 +1919,6 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	case PCI_DEVICE_ID_XGI_40:
 		xgifb_info->chip = XG40;
 		break;
-	case PCI_DEVICE_ID_XGI_41:
-		xgifb_info->chip = XG41;
-		break;
 	case PCI_DEVICE_ID_XGI_42:
 		xgifb_info->chip = XG42;
 		break;
@@ -2006,13 +1972,13 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	xgifb_info->mmio_vbase = ioremap(xgifb_info->mmio_base,
 					    xgifb_info->mmio_size);
 
-	pr_info("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
-	       xgifb_info->video_base,
+	pr_info("Framebuffer at 0x%Lx, mapped to 0x%p, size %dk\n",
+	       (u64) xgifb_info->video_base,
 	       xgifb_info->video_vbase,
 	       xgifb_info->video_size / 1024);
 
-	pr_info("MMIO at 0x%lx, mapped to 0x%p, size %ldk\n",
-	       xgifb_info->mmio_base, xgifb_info->mmio_vbase,
+	pr_info("MMIO at 0x%Lx, mapped to 0x%p, size %ldk\n",
+	       (u64) xgifb_info->mmio_base, xgifb_info->mmio_vbase,
 	       xgifb_info->mmio_size / 1024);
 
 	pci_set_drvdata(pdev, xgifb_info);
@@ -2174,8 +2140,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 		xgifb_info->refresh_rate = 60;
 	if (XGIfb_search_refresh_rate(xgifb_info,
 			xgifb_info->refresh_rate) == 0) {
-		xgifb_info->rate_idx =
-			XGIbios_mode[xgifb_info->mode_idx].rate_idx;
+		xgifb_info->rate_idx = 1;
 		xgifb_info->refresh_rate = 60;
 	}
 
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
index 37bb730de047..9068c5ad76ec 100644
--- a/drivers/staging/xgifb/XGIfb.h
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -23,9 +23,7 @@ enum xgifb_display_type {
 
 enum XGI_CHIP_TYPE {
 	XG40 = 32,
-	XG41,
 	XG42,
-	XG45,
 	XG20 = 48,
 	XG21,
 	XG27,
@@ -66,9 +64,9 @@ struct xgifb_video_info {
 
 	int           chip_id;
 	unsigned int  video_size;
-	unsigned long video_base;
+	phys_addr_t   video_base;
 	void __iomem *video_vbase;
-	unsigned long mmio_base;
+	phys_addr_t   mmio_base;
 	unsigned long mmio_size;
 	void __iomem *mmio_vbase;
 	unsigned long vga_base;
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
index 3650bbff7686..c222d611431d 100644
--- a/drivers/staging/xgifb/vb_init.c
+++ b/drivers/staging/xgifb/vb_init.c
@@ -353,7 +353,6 @@ static void XGINew_DDR1x_DefaultRegister(
 		XGINew_SetMemoryClock(HwDeviceExtension, pVBInfo);
 
 		switch (HwDeviceExtension->jChipType) {
-		case XG41:
 		case XG42:
 			/* CR82 */
 			xgifb_reg_set(P3d4,
@@ -556,8 +555,7 @@ static void XGINew_SetDRAMDefaultRegister340(
 		xgifb_reg_set(P3d4, (0x8A + j),
 				pVBInfo->CR40[1 + j][pVBInfo->ram_type]);
 
-	if ((HwDeviceExtension->jChipType == XG41) ||
-	    (HwDeviceExtension->jChipType == XG42))
+	if (HwDeviceExtension->jChipType == XG42)
 		xgifb_reg_set(P3d4, 0x8C, 0x87);
 
 	xgifb_reg_set(P3d4,
@@ -854,78 +852,6 @@ static void XGINew_CheckChannel(struct xgi_hw_device_info *HwDeviceExtension,
 		pVBInfo->ram_channel = 1; /* Single channel */
 		xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x51); /* 32Mx16 bit*/
 		break;
-	case XG41:
-		if (XGINew_CheckFrequence(pVBInfo) == 1) {
-			pVBInfo->ram_bus = 32; /* 32 bits */
-			pVBInfo->ram_channel = 3; /* Quad Channel */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4C);
-
-			if (XGINew_ReadWriteRest(25, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x48);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x49);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 3;
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x3C);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x38);
-
-			if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1)
-				return;
-			else
-				xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x39);
-		} else { /* DDR */
-			pVBInfo->ram_bus = 64; /* 64 bits */
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x5A);
-
-			if (XGINew_ReadWriteRest(25, 24, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 1; /* Single channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x52);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x53);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4A);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 1; /* Single channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x42);
-
-			if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1)
-				return;
-			else
-				xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x43);
-		}
-
-		break;
-
 	case XG42:
 		/*
 		 XG42 SR14 D[3] Reserve
@@ -1478,7 +1404,7 @@ unsigned char XGIInitNew(struct pci_dev *pdev)
 
 	pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress;
 
-	pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress;
+	pVBInfo->BaseAddr = xgifb_info->vga_base;
 
 	/* Newdebugcode(0x99); */
 
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 60d4adf99923..b2f4338b1109 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -16,36 +16,6 @@
 
 #define  IndexMask 0xff
 
-static const unsigned short XGINew_MDA_DAC[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F};
-
-static const unsigned short XGINew_CGA_DAC[] = {
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
-
-static const unsigned short XGINew_EGA_DAC[] = {
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
-	0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
-	0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
-	0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
-	0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
-	0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
-	0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
-
 static const unsigned short XGINew_VGA_DAC[] = {
 	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
 	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
@@ -60,8 +30,7 @@ static const unsigned short XGINew_VGA_DAC[] = {
 
 void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
 {
-	pVBInfo->SModeIDTable = (struct XGI_StStruct *) XGI330_SModeIDTable;
-	pVBInfo->StandTable = (struct SiS_StandTable_S *) XGI330_StandTable;
+	pVBInfo->StandTable = (struct SiS_StandTable_S *) &XGI330_StandTable;
 	pVBInfo->EModeIDTable = (struct XGI_ExtStruct *) XGI330_EModeIDTable;
 	pVBInfo->RefIndex = (struct XGI_Ext2Struct *) XGI330_RefIndex;
 	pVBInfo->XGINEWUB_CRT1Table
@@ -182,38 +151,17 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
 
 }
 
-static unsigned char XGI_GetModePtr(unsigned short ModeNo,
-				    unsigned short ModeIdIndex,
-				    struct vb_device_info *pVBInfo)
-{
-	unsigned char index;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].St_StTableIndex;
-	else {
-		if (pVBInfo->ModeType <= 0x02)
-			index = 0x1B; /* 02 -> ModeEGA */
-		else
-			index = 0x0F;
-	}
-	return index; /* Get pVBInfo->StandTable index */
-}
-
 static void XGI_SetSeqRegs(unsigned short ModeNo,
-			   unsigned short StandTableIndex,
 			   unsigned short ModeIdIndex,
 			   struct vb_device_info *pVBInfo)
 {
 	unsigned char tempah, SRdata;
 	unsigned short i, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	xgifb_reg_set(pVBInfo->P3c4, 0x00, 0x03); /* Set SR0 */
-	tempah = pVBInfo->StandTable[StandTableIndex].SR[0];
+	tempah = pVBInfo->StandTable->SR[0];
 
 	i = XGI_SetCRT2ToLCDA;
 	if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -230,13 +178,12 @@ static void XGI_SetSeqRegs(unsigned short ModeNo,
 
 	for (i = 02; i <= 04; i++) {
 		/* Get SR2,3,4 from file */
-		SRdata = pVBInfo->StandTable[StandTableIndex].SR[i - 1];
+		SRdata = pVBInfo->StandTable->SR[i - 1];
 		xgifb_reg_set(pVBInfo->P3c4, i, SRdata); /* Set SR2 3 4 */
 	}
 }
 
 static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension,
-			    unsigned short StandTableIndex,
 			    struct vb_device_info *pVBInfo)
 {
 	unsigned char CRTCdata;
@@ -248,26 +195,22 @@ static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension,
 
 	for (i = 0; i <= 0x18; i++) {
 		/* Get CRTC from file */
-		CRTCdata = pVBInfo->StandTable[StandTableIndex].CRTC[i];
+		CRTCdata = pVBInfo->StandTable->CRTC[i];
 		xgifb_reg_set(pVBInfo->P3d4, i, CRTCdata); /* Set CRTC(3d4) */
 	}
 }
 
 static void XGI_SetATTRegs(unsigned short ModeNo,
-			   unsigned short StandTableIndex,
 			   unsigned short ModeIdIndex,
 			   struct vb_device_info *pVBInfo)
 {
 	unsigned char ARdata;
 	unsigned short i, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	for (i = 0; i <= 0x13; i++) {
-		ARdata = pVBInfo->StandTable[StandTableIndex].ATTR[i];
+		ARdata = pVBInfo->StandTable->ATTR[i];
 		if (modeflag & Charx8Dot) { /* ifndef Dot9 */
 			if (i == 0x13) {
 				if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -295,15 +238,14 @@ static void XGI_SetATTRegs(unsigned short ModeNo,
 	outb(0x20, pVBInfo->P3c0);
 }
 
-static void XGI_SetGRCRegs(unsigned short StandTableIndex,
-			   struct vb_device_info *pVBInfo)
+static void XGI_SetGRCRegs(struct vb_device_info *pVBInfo)
 {
 	unsigned char GRdata;
 	unsigned short i;
 
 	for (i = 0; i <= 0x08; i++) {
 		/* Get GR from file */
-		GRdata = pVBInfo->StandTable[StandTableIndex].GRC[i];
+		GRdata = pVBInfo->StandTable->GRC[i];
 		xgifb_reg_set(pVBInfo->P3ce, i, GRdata); /* Set GR(3ce) */
 	}
 
@@ -344,12 +286,7 @@ static unsigned char XGI_AjustCRT2Rate(unsigned short ModeNo,
 {
 	unsigned short tempax, tempbx, resinfo, modeflag, infoflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	tempbx = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID;
 	tempax = 0;
@@ -584,11 +521,7 @@ static void XGI_SetCRT1Timing_V(unsigned short ModeIdIndex,
 	data &= 0x80;
 	data = data >> 2;
 
-	if (ModeNo <= 0x13)
-		i = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	i &= DoubleScanMode;
 	if (i)
 		data |= 0x80;
@@ -641,158 +574,97 @@ static void XGI_SetXG21CRTC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned char StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
+	unsigned char index, Tempax, Tempbx, Tempcx, Tempdx;
 	unsigned short Temp1, Temp2, Temp3;
 
-	if (ModeNo <= 0x13) {
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		/* CR04 HRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4];
-		/* SR2E [7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-		/* Tempbx: CR05 HRE */
-		Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5];
-		Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */
-		Tempcx = Tempax;
-		Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */
-		Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
-		if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */
-			Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */
-		Tempdx <<= 2; /* Tempdx << 2 */
-		/* SR2F [7:2]->HRE */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* Tempax: CR16 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16];
-		Tempbx = Tempax; /* Tempbx=Tempax */
-		Tempax &= 0x01; /* Tempax: VRS[0] */
-		xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS */
-
-		/* Tempax: CR7 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-		Tempdx = Tempbx >> 1; /* Tempdx: VRS[7:1] */
-		Tempcx = Tempax & 0x04; /* Tempcx: CR7[2] */
-		Tempcx <<= 5; /* Tempcx[7]: VRS[8] */
-		Tempdx |= Tempcx; /* Tempdx: VRS[8:1] */
-		/* SR34[7:0]: VRS[8:1] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempdx);
-
-		/* Temp1[8]: VRS[8] unsigned char -> unsigned short */
-		Temp1 = Tempcx << 1;
-		Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
-		Tempax &= 0x80; /* Tempax[7]: CR7[7] */
-		Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
-		Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
-
-		/* CR16 VRE */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		Temp2 = Temp1 & 0x3F0; /* Temp2[9:4]: VRS[9:4] */
-		Temp2 |= Tempax; /* Temp2[9:0]: VRE[9:0] */
-		Temp3 = Temp1 & 0x0F; /* Temp3[3:0]: VRS[3:0] */
-		if (Tempax < Temp3) /* VRE[3:0]<VRS[3:0] */
-			Temp2 |= 0x10; /* Temp2: VRE + 0x10 */
-		Temp2 &= 0xFF; /* Temp2[7:0]: VRE[7:0] */
-		Tempax = (unsigned char) Temp2; /* Tempax[7:0]: VRE[7:0] */
-		Tempax <<= 2; /* Tempax << 2: VRE[5:0] */
-		Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
-		Temp1 >>= 9; /* [10:9]->[1:0] */
-		Tempbx = (unsigned char) Temp1; /* Tempbx[1:0]: VRS[10:9] */
-		Tempax |= Tempbx; /* VRE[5:0]VRS[10:9] */
-		Tempax &= 0x7F;
-		/* SR3F D[7:2]->VRE D[1:0]->VRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
-	} else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempcx = Tempax; /* Tempcx: HRS */
-		/* SR2E[7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-
-		Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */
-		Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */
-		Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */
-		Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */
-		Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
-		Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
-
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
-		Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */
-		Tempbx <<= 3; /* Tempbx[5]: HRE[5] */
-		Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */
-
-		Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */
-		Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */
-
-		Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */
-		if (Tempax < Tempcx) /* HRE < HRS */
-			Temp2 |= 0x40; /* Temp2 + 0x40 */
-
-		Temp2 &= 0xFF;
-		Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */
-		Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */
-		Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */
-		Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */
-		/* SR2F D[7:2]->HRE, D[1:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* CR10 VRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
-		Tempbx = Tempax; /* Tempbx: VRS */
-		Tempax &= 0x01; /* Tempax[0]: VRS[0] */
-		xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */
-		/* CR7[2][7] VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
-		Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */
-		Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */
-		Tempdx <<= 5; /* Tempdx[7]: VRS[8] */
-		Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */
-
-		Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */
-		Temp1 <<= 1; /* Temp1[8]: VRS[8] */
-		Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
-		Tempax &= 0x80;
-		Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
-		Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
-		/* Tempax: SRA */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempax &= 0x08; /* Tempax[3]: VRS[3] */
-		Temp2 = Tempax;
-		Temp2 <<= 7; /* Temp2[10]: VRS[10] */
-		Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */
-
-		/* Tempax: CR11 VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		/* Tempbx: SRA */
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */
-		Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
-		Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
-		Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */
-		Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */
-
-		Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */
-		if (Tempax < Temp3) /* VRE < VRS */
-			Temp2 |= 0x20; /* VRE + 0x20 */
-
-		Temp2 &= 0xFF;
-		Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */
-		Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */
-		Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
-		Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */
-		Tempbx = (unsigned char) Temp1;
-		Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */
-		Tempax &= 0x7F;
-		/* SR3F D[7:2]->VRE D[1:0]->VRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
-	}
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempcx = Tempax; /* Tempcx: HRS */
+	/* SR2E[7:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
+
+	Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */
+	Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */
+	Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */
+	Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */
+	Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+	Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
+
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+	Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */
+	Tempbx <<= 3; /* Tempbx[5]: HRE[5] */
+	Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */
+
+	Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */
+	Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */
+
+	Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */
+	if (Tempax < Tempcx) /* HRE < HRS */
+		Temp2 |= 0x40; /* Temp2 + 0x40 */
+
+	Temp2 &= 0xFF;
+	Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */
+	Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */
+	Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */
+	Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */
+	/* SR2F D[7:2]->HRE, D[1:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
+
+	/* CR10 VRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+	Tempbx = Tempax; /* Tempbx: VRS */
+	Tempax &= 0x01; /* Tempax[0]: VRS[0] */
+	xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */
+	/* CR7[2][7] VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+	Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */
+	Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */
+	Tempdx <<= 5; /* Tempdx[7]: VRS[8] */
+	Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */
+
+	Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */
+	Temp1 <<= 1; /* Temp1[8]: VRS[8] */
+	Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
+	Tempax &= 0x80;
+	Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
+	Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
+	/* Tempax: SRA */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempax &= 0x08; /* Tempax[3]: VRS[3] */
+	Temp2 = Tempax;
+	Temp2 <<= 7; /* Temp2[10]: VRS[10] */
+	Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */
+
+	/* Tempax: CR11 VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+	Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
+	/* Tempbx: SRA */
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */
+	Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
+	Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
+	Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */
+	Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */
+
+	Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */
+	if (Tempax < Temp3) /* VRE < VRS */
+		Temp2 |= 0x20; /* VRE + 0x20 */
+
+	Temp2 &= 0xFF;
+	Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */
+	Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */
+	Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
+	Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */
+	Tempbx = (unsigned char) Temp1;
+	Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */
+	Tempax &= 0x7F;
+	/* SR3F D[7:2]->VRE D[1:0]->VRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
 }
 
 static void XGI_SetXG27CRTC(unsigned short ModeNo,
@@ -800,139 +672,88 @@ static void XGI_SetXG27CRTC(unsigned short ModeNo,
 			    unsigned short RefreshRateTableIndex,
 			    struct vb_device_info *pVBInfo)
 {
-	unsigned short StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
-
-	if (ModeNo <= 0x13) {
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		/* CR04 HRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4];
-		/* SR2E [7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-		/* Tempbx: CR05 HRE */
-		Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5];
-		Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */
-		Tempcx = Tempax;
-		Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */
-		Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
-		if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */
-			Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */
-		Tempdx <<= 2; /* Tempdx << 2 */
-		/* SR2F [7:2]->HRE */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* Tempax: CR10 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16];
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax); /* SR34[7:0]->VRS */
-		Tempcx = Tempax; /* Tempcx=Tempax=VRS[7:0] */
-		/* Tempax[7][2]: CR7[7][2] VRS[9][8] */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-		Tempbx = Tempax; /* Tempbx=CR07 */
-		Tempax &= 0x04; /* Tempax[2]: CR07[2] VRS[8] */
-		Tempax >>= 2;
-		/* SR35 D[0]->VRS D[8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
-		Tempcx |= (Tempax << 8); /* Tempcx[8] |= VRS[8] */
-		Tempcx |= (Tempbx & 0x80) << 2; /* Tempcx[9] |= VRS[9] */
-
-		/* CR11 VRE */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17];
-		Tempax &= 0x0F; /* Tempax: VRE[3:0] */
-		Tempbx = Tempcx; /* Tempbx=Tempcx=VRS[9:0] */
-		Tempbx &= 0x3F0; /* Tempbx[9:4]: VRS[9:4] */
-		Tempbx |= Tempax; /* Tempbx[9:0]: VRE[9:0] */
-		if (Tempax <= (Tempcx & 0x0F)) /* VRE[3:0]<=VRS[3:0] */
-			Tempbx |= 0x10; /* Tempbx: VRE + 0x10 */
-		/* Tempax[7:0]: VRE[7:0] */
-		Tempax = (unsigned char) Tempbx & 0xFF;
-		Tempax <<= 2; /* Tempax << 2: VRE[5:0] */
-		Tempcx = (Tempcx & 0x600) >> 8; /* Tempcx VRS[10:9] */
-		/* SR3F D[7:2]->VRE D[5:0] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
-		/* SR35 D[2:1]->VRS[10:9] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x06, Tempcx);
-	} else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempbx = Tempax; /* Tempbx: HRS[7:0] */
-		/* SR2E[7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-
-		/* SR0B */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5];
-		Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
-		Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
-		Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
-		Tempcx = Tempax; /* Tempcx: HRE[4:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
-		Tempax &= 0x04; /* Tempax[2]: HRE[5] */
-		Tempax <<= 3; /* Tempax[5]: HRE[5] */
-		Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */
-
-		Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */
-		Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */
-
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempax &= 0x3F; /* Tempax: HRS[5:0] */
-		if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */
-			Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */
-		Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
-		Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
-		Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
-		/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* CR10 VRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
-		/* SR34[7:0]->VRS[7:0] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax);
-
-		Tempcx = Tempax; /* Tempcx <= VRS[7:0] */
-		/* CR7[7][2] VRS[9][8] */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
-		Tempbx = Tempax; /* Tempbx <= CR07[7:0] */
-		Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */
-		Tempax >>= 2; /* Tempax[0]: VRS[8] */
-		/* SR35[0]: VRS[8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
-		Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */
-		Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */
-		/* Tempax: SR0A */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempax &= 0x08; /* SR0A[3] VRS[10] */
-		Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */
-
-		/* Tempax: CR11 VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		/* Tempbx: SR0A */
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */
-		Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
-		Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
-		Tempbx = Tempcx; /* Tempbx: VRS[10:0] */
-		Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */
-		Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */
-
-		if (Tempbx <= Tempcx) /* VRE <= VRS */
-			Tempbx |= 0x20; /* VRE + 0x20 */
-
-		/* Tempax: Tempax[7:0]; VRE[5:0]00 */
-		Tempax = (Tempbx << 2) & 0xFF;
-		/* SR3F[7:2]:VRE[5:0] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
-		Tempax = Tempcx >> 8;
-		/* SR35[2:0]:VRS[10:8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax);
-	}
+	unsigned short index, Tempax, Tempbx, Tempcx;
+
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempbx = Tempax; /* Tempbx: HRS[7:0] */
+	/* SR2E[7:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
+
+	/* SR0B */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5];
+	Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+	Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+	Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
+	Tempcx = Tempax; /* Tempcx: HRE[4:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+	Tempax &= 0x04; /* Tempax[2]: HRE[5] */
+	Tempax <<= 3; /* Tempax[5]: HRE[5] */
+	Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */
+
+	Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */
+	Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */
+
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempax &= 0x3F; /* Tempax: HRS[5:0] */
+	if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */
+		Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */
+	Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+	Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
+	Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
+	/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
+
+	/* CR10 VRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+	/* SR34[7:0]->VRS[7:0] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax);
+
+	Tempcx = Tempax; /* Tempcx <= VRS[7:0] */
+	/* CR7[7][2] VRS[9][8] */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+	Tempbx = Tempax; /* Tempbx <= CR07[7:0] */
+	Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */
+	Tempax >>= 2; /* Tempax[0]: VRS[8] */
+	/* SR35[0]: VRS[8] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
+	Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */
+	Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */
+	/* Tempax: SR0A */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempax &= 0x08; /* SR0A[3] VRS[10] */
+	Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */
+
+	/* Tempax: CR11 VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+	Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
+	/* Tempbx: SR0A */
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */
+	Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
+	Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
+	Tempbx = Tempcx; /* Tempbx: VRS[10:0] */
+	Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */
+	Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */
+
+	if (Tempbx <= Tempcx) /* VRE <= VRS */
+		Tempbx |= 0x20; /* VRE + 0x20 */
+
+	/* Tempax: Tempax[7:0]; VRE[5:0]00 */
+	Tempax = (Tempbx << 2) & 0xFF;
+	/* SR3F[7:2]:VRE[5:0] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
+	Tempax = Tempcx >> 8;
+	/* SR35[2:0]:VRS[10:8] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax);
 }
 
 static void XGI_SetXG27FPBits(struct vb_device_info *pVBInfo)
@@ -954,7 +775,7 @@ static void xgifb_set_lcd(int chip_id,
 			  unsigned short RefreshRateTableIndex,
 			  unsigned short ModeNo)
 {
-	unsigned short Data, Temp, b3CC;
+	unsigned short Data, Temp;
 	unsigned short XGI_P3cc;
 
 	XGI_P3cc = pVBInfo->P3cc;
@@ -995,23 +816,13 @@ static void xgifb_set_lcd(int chip_id,
 	xgifb_reg_and(pVBInfo->P3c4, 0x30, ~0x20); /* Hsync polarity */
 	xgifb_reg_and(pVBInfo->P3c4, 0x35, ~0x80); /* Vsync polarity */
 
-	if (ModeNo <= 0x13) {
-		b3CC = (unsigned char) inb(XGI_P3cc);
-		if (b3CC & 0x40)
-			/* Hsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
-		if (b3CC & 0x80)
-			/* Vsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
-	} else {
-		Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
-		if (Data & 0x4000)
-			/* Hsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
-		if (Data & 0x8000)
-			/* Vsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
-	}
+	Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	if (Data & 0x4000)
+		/* Hsync polarity */
+		xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
+	if (Data & 0x8000)
+		/* Vsync polarity */
+		xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
 }
 
 /* --------------------------------------------------------------------- */
@@ -1024,30 +835,22 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo,
 			       struct vb_device_info *pVBInfo,
 			       unsigned short RefreshRateTableIndex)
 {
-	int i, index = -1;
+	int index = -1;
 
 	xgifb_reg_and(pVBInfo->P3d4, 0x11, 0x7F); /* Unlock CR0~7 */
-	if (ModeNo <= 0x13) {
-		for (i = 0; i < 12; i++) {
-			if (ModeNo == pVBInfo->UpdateCRT1[i].ModeID)
-				index = i;
-		}
-	} else {
-		if (ModeNo == 0x2E &&
-		    (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
-							      RES640x480x60))
-			index = 12;
-		else if (ModeNo == 0x2E &&
-			 (pVBInfo->RefIndex[RefreshRateTableIndex].
+	if (ModeNo == 0x2E &&
+	    (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
+						      RES640x480x60))
+		index = 12;
+	else if (ModeNo == 0x2E && (pVBInfo->RefIndex[RefreshRateTableIndex].
 				Ext_CRT1CRTC == RES640x480x72))
-			index = 13;
-		else if (ModeNo == 0x2F)
-			index = 14;
-		else if (ModeNo == 0x50)
-			index = 15;
-		else if (ModeNo == 0x59)
-			index = 16;
-	}
+		index = 13;
+	else if (ModeNo == 0x2F)
+		index = 14;
+	else if (ModeNo == 0x50)
+		index = 15;
+	else if (ModeNo == 0x59)
+		index = 16;
 
 	if (index != -1) {
 		xgifb_reg_set(pVBInfo->P3d4, 0x02,
@@ -1061,20 +864,6 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo,
 	}
 }
 
-static unsigned short XGI_GetResInfo(unsigned short ModeNo,
-		unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
-{
-	unsigned short resindex;
-
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	return resindex;
-}
-
 static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension,
 		unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex,
@@ -1084,33 +873,25 @@ static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension,
 
 	unsigned char data;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempax = pVBInfo->StResInfo[resindex].HTotal;
-		tempbx = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempax = pVBInfo->ModeResInfo[resindex].HTotal;
-		tempbx = pVBInfo->ModeResInfo[resindex].VTotal;
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempax = pVBInfo->ModeResInfo[resindex].HTotal;
+	tempbx = pVBInfo->ModeResInfo[resindex].VTotal;
 
 	if (modeflag & HalfDCLK)
 		tempax = tempax >> 1;
 
-	if (ModeNo > 0x13) {
-		if (modeflag & HalfDCLK)
-			tempax = tempax << 1;
+	if (modeflag & HalfDCLK)
+		tempax = tempax << 1;
 
-		temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
-		if (temp & InterlaceMode)
-			tempbx = tempbx >> 1;
+	if (temp & InterlaceMode)
+		tempbx = tempbx >> 1;
 
-		if (modeflag & DoubleScanMode)
-			tempbx = tempbx << 1;
-	}
+	if (modeflag & DoubleScanMode)
+		tempbx = tempbx << 1;
 
 	tempcx = 8;
 
@@ -1258,18 +1039,10 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
 	unsigned short CRT2Index, VCLKIndex;
 	unsigned short modeflag, resinfo;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-		CRT2Index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT2CRTC;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	if (pVBInfo->IF_DEF_LVDS == 0) {
 		CRT2Index = CRT2Index >> 6; /*  for LCD */
@@ -1318,23 +1091,13 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
 				VCLKIndex += 25;
 			}
 		} else { /* for CRT2 */
-			/* Port 3cch */
-			VCLKIndex = (unsigned char) inb((pVBInfo->P3ca + 0x02));
-			VCLKIndex = ((VCLKIndex >> 2) & 0x03);
-			if (ModeNo > 0x13) {
-				/* di+Ext_CRTVCLK */
-				VCLKIndex = pVBInfo->RefIndex[
-							RefreshRateTableIndex].
+			/* di+Ext_CRTVCLK */
+			VCLKIndex = pVBInfo->RefIndex[RefreshRateTableIndex].
 								Ext_CRTVCLK;
-				VCLKIndex &= IndexMask;
-			}
+			VCLKIndex &= IndexMask;
 		}
 	} else { /* LVDS */
-		if (ModeNo <= 0x13)
-			VCLKIndex = CRT2Index;
-		else
-			VCLKIndex = CRT2Index;
-
+		VCLKIndex = CRT2Index;
 		VCLKIndex = VCLKIndex >> 6;
 		if ((pVBInfo->LCDResInfo == Panel_800x600) ||
 		    (pVBInfo->LCDResInfo == Panel_320x480))
@@ -1431,27 +1194,13 @@ static void XGI_SetCRT1FIFO(unsigned short ModeNo,
 	data &= 0xfe;
 	xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); /* diable auto-threshold */
 
-	if (ModeNo > 0x13) {
-		xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34);
-		data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-		data &= 0xC0;
-		xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30);
-		data = xgifb_reg_get(pVBInfo->P3c4, 0x3D);
-		data |= 0x01;
-		xgifb_reg_set(pVBInfo->P3c4, 0x3D, data);
-	} else {
-		if (HwDeviceExtension->jChipType == XG27) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x0E);
-			data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-			data &= 0xC0;
-			xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x20);
-		} else {
-			xgifb_reg_set(pVBInfo->P3c4, 0x08, 0xAE);
-			data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-			data &= 0xF0;
-			xgifb_reg_set(pVBInfo->P3c4, 0x09, data);
-		}
-	}
+	xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34);
+	data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
+	data &= 0xC0;
+	xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30);
+	data = xgifb_reg_get(pVBInfo->P3c4, 0x3D);
+	data |= 0x01;
+	xgifb_reg_set(pVBInfo->P3c4, 0x3D, data);
 
 	if (HwDeviceExtension->jChipType == XG21)
 		XGI_SetXG21FPBits(pVBInfo); /* Fix SR9[7:6] can't read back */
@@ -1466,13 +1215,9 @@ static void XGI_SetVCLKState(struct xgi_hw_device_info *HwDeviceExtension,
 
 	unsigned char index;
 
-	if (ModeNo <= 0x13)
-		VCLK = 0;
-	else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
-		index &= IndexMask;
-		VCLK = pVBInfo->VCLKData[index].CLOCK;
-	}
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+	index &= IndexMask;
+	VCLK = pVBInfo->VCLKData[index].CLOCK;
 
 	data = xgifb_reg_get(pVBInfo->P3c4, 0x32);
 	data &= 0xf3;
@@ -1508,44 +1253,26 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension,
 	unsigned short data, data2, data3, infoflag = 0, modeflag, resindex,
 			xres;
 
-	if (ModeNo > 0x13) {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_InfoFlag;
-	} else
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
 	if (xgifb_reg_get(pVBInfo->P3d4, 0x31) & 0x01)
 		xgifb_reg_and_or(pVBInfo->P3c4, 0x1F, 0x3F, 0x00);
 
-	if (ModeNo > 0x13)
-		data = infoflag;
-	else
-		data = 0;
-
+	data = infoflag;
 	data2 = 0;
-
-	if (ModeNo > 0x13) {
-		if (pVBInfo->ModeType > 0x02) {
-			data2 |= 0x02;
-			data3 = pVBInfo->ModeType - ModeVGA;
-			data3 = data3 << 2;
-			data2 |= data3;
-		}
-	}
-
+	data2 |= 0x02;
+	data3 = pVBInfo->ModeType - ModeVGA;
+	data3 = data3 << 2;
+	data2 |= data3;
 	data &= InterlaceMode;
 
 	if (data)
 		data2 |= 0x20;
 
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x06, ~0x3F, data2);
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13)
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-	else
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
 
 	data = 0x0000;
 	if (infoflag & InterlaceMode) {
@@ -1568,18 +1295,10 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension,
 	if (modeflag & LineCompareOff)
 		data2 |= 0x08;
 
-	if (ModeNo > 0x13) {
-		if (pVBInfo->ModeType == ModeEGA)
-			data2 |= 0x40;
-	}
-
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x0F, ~0x48, data2);
 	data = 0x60;
-	if (pVBInfo->ModeType != ModeText) {
-		data = data ^ 0x60;
-		if (pVBInfo->ModeType != ModeEGA)
-			data = data ^ 0xA0;
-	}
+	data = data ^ 0x60;
+	data = data ^ 0xA0;
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x21, 0x1F, data);
 
 	XGI_SetVCLKState(HwDeviceExtension, ModeNo, RefreshRateTableIndex,
@@ -1644,38 +1363,13 @@ static void XGI_WriteDAC(unsigned short dl,
 static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned short data, data2, time, i, j, k, m, n, o, si, di, bx, dl, al,
-			ah, dh;
-	const unsigned short *table = NULL;
-
-	if (ModeNo <= 0x13)
-		data = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		data = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
-	data &= DACInfoFlag;
-	time = 64;
-
-	if (data == 0x00)
-		table = XGINew_MDA_DAC;
-	else if (data == 0x08)
-		table = XGINew_CGA_DAC;
-	else if (data == 0x10)
-		table = XGINew_EGA_DAC;
-	else if (data == 0x18) {
-		time = 256;
-		table = XGINew_VGA_DAC;
-	}
-
-	if (time == 256)
-		j = 16;
-	else
-		j = time;
+	unsigned short data, data2, i, k, m, n, o, si, di, bx, dl, al, ah, dh;
+	const unsigned short *table = XGINew_VGA_DAC;
 
 	outb(0xFF, pVBInfo->P3c6);
 	outb(0x00, pVBInfo->P3c8);
 
-	for (i = 0; i < j; i++) {
+	for (i = 0; i < 16; i++) {
 		data = table[i];
 
 		for (k = 0; k < 3; k++) {
@@ -1692,45 +1386,43 @@ static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		}
 	}
 
-	if (time == 256) {
-		for (i = 16; i < 32; i++) {
-			data = table[i];
-
-			for (k = 0; k < 3; k++)
-				outb(data, pVBInfo->P3c9);
-		}
+	for (i = 16; i < 32; i++) {
+		data = table[i];
 
-		si = 32;
+		for (k = 0; k < 3; k++)
+			outb(data, pVBInfo->P3c9);
+	}
 
-		for (m = 0; m < 9; m++) {
-			di = si;
-			bx = si + 0x04;
-			dl = 0;
+	si = 32;
 
-			for (n = 0; n < 3; n++) {
-				for (o = 0; o < 5; o++) {
-					dh = table[si];
-					ah = table[di];
-					al = table[bx];
-					si++;
-					XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
-				}
+	for (m = 0; m < 9; m++) {
+		di = si;
+		bx = si + 0x04;
+		dl = 0;
 
-				si -= 2;
+		for (n = 0; n < 3; n++) {
+			for (o = 0; o < 5; o++) {
+				dh = table[si];
+				ah = table[di];
+				al = table[bx];
+				si++;
+				XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
+			}
 
-				for (o = 0; o < 3; o++) {
-					dh = table[bx];
-					ah = table[di];
-					al = table[si];
-					si--;
-					XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
-				}
+			si -= 2;
 
-				dl++;
+			for (o = 0; o < 3; o++) {
+				dh = table[bx];
+				ah = table[di];
+				al = table[si];
+				si--;
+				XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
 			}
 
-			si += 5;
+			dl++;
 		}
+
+		si += 5;
 	}
 }
 
@@ -1740,34 +1432,20 @@ static void XGI_GetLVDSResInfo(unsigned short ModeNo,
 {
 	unsigned short resindex, xres, yres, modeflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	/* si+Ext_ResInfo */
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal;
-		yres = pVBInfo->ModeResInfo[resindex].VTotal;
-	}
-	if (ModeNo > 0x13) {
-		if (modeflag & HalfDCLK)
-			xres = xres << 1;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal;
+	yres = pVBInfo->ModeResInfo[resindex].VTotal;
 
-		if (modeflag & DoubleScanMode)
-			yres = yres << 1;
-	}
+	if (modeflag & HalfDCLK)
+		xres = xres << 1;
+
+	if (modeflag & DoubleScanMode)
+		yres = yres << 1;
 
 	if (xres == 720)
 		xres = 640;
@@ -1789,32 +1467,16 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo,
 
 	tempbx = BX;
 
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	tempal = tempal & 0x0f;
 
 	if (tempbx <= 1) { /* ExpLink */
-		if (ModeNo <= 0x13) {
-			/* find no Ext_CRT2CRTC2 */
-			tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-		} else {
-			tempal = pVBInfo->RefIndex[RefreshRateTableIndex].
-					Ext_CRT2CRTC;
-		}
+		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 		if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
-			if (ModeNo <= 0x13)
-				tempal = pVBInfo->SModeIDTable[ModeIdIndex].
-						St_CRT2CRTC2;
-			else
-				tempal = pVBInfo->RefIndex[
-						RefreshRateTableIndex].
+			tempal = pVBInfo->RefIndex[RefreshRateTableIndex].
 							Ext_CRT2CRTC2;
 		}
 
@@ -1882,9 +1544,6 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo,
 			tempbx = tempdi[i].MASK;
 			tempdx = pVBInfo->LCDInfo;
 
-			if (ModeNo <= 0x13) /* alan 09/10/2003 */
-				tempdx |= SetLCDStdMode;
-
 			if (modeflag & HalfDCLK)
 				tempdx |= SetLCDLowResolution;
 
@@ -2238,15 +1897,8 @@ static void *XGI_GetTVPtr(unsigned short BX, unsigned short ModeNo,
 	struct XGI330_TVDataTablStruct *tempdi = NULL;
 
 	tempbx = BX;
-
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-	}
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 	tempal = tempal & 0x3f;
 	table = tempbx;
 
@@ -2413,11 +2065,7 @@ static void XGI_ModCRT1Regs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	struct XGI_LVDSCRT1HDataStruct *LCDPtr = NULL;
 	struct XGI_LVDSCRT1VDataStruct *LCDPtr1 = NULL;
 
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	else
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 	index = index & IndexMask;
 
 	tempbx = 0;
@@ -2530,14 +2178,10 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempbx, tempax, tempcx, tempdx, push1, push2, modeflag;
 	unsigned long temp, temp1, temp2, temp3, push3;
-	struct XGI330_LCDDataDesStruct *LCDPtr = NULL;
+	struct XGI_LCDDesStruct *LCDPtr = NULL;
 	struct XGI330_LCDDataDesStruct2 *LCDPtr1 = NULL;
 
-	if (ModeNo > 0x13)
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	else
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	tempbx = 3;
 	if (pVBInfo->LCDInfo & EnableScalingLCD)
 		LCDPtr1 =
@@ -2550,7 +2194,7 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 					  pVBInfo);
 	else
 		LCDPtr =
-		    (struct XGI330_LCDDataDesStruct *)
+		    (struct XGI_LCDDesStruct *)
 				XGI_GetLcdPtr(
 					  tempbx,
 					  ModeNo,
@@ -2829,12 +2473,8 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
 	unsigned short index, modeflag;
 	unsigned char tempal;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if ((pVBInfo->SetFlag & ProgrammingCRT2) &&
 	    (!(pVBInfo->LCDInfo & EnableScalingLCD))) { /* {LCDA/LCDB} */
@@ -2895,9 +2535,6 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
 	if ((pVBInfo->LCDInfo & EnableScalingLCD) && (modeflag & Charx8Dot))
 		tempal = tempal ^ tempal; /* ; set to VCLK25MHz always */
 
-	if (ModeNo <= 0x13)
-		return tempal;
-
 	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
 	return tempal;
 }
@@ -3079,11 +2716,7 @@ static void XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempax, push, tempbx, temp, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	pVBInfo->SetFlag = 0;
 	pVBInfo->ModeType = modeflag & ModeTypeMask;
 	tempbx = 0;
@@ -3283,17 +2916,8 @@ static void XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
 	resinfo = 0;
 
 	if (pVBInfo->VBInfo & SetCRT2ToTV) {
-		if (ModeNo <= 0x13) {
-			modeflag = pVBInfo->SModeIDTable[ModeIdIndex].
-					St_ModeFlag; /* si+St_ModeFlag */
-			resinfo = pVBInfo->SModeIDTable[ModeIdIndex].
-					St_ResInfo; /* si+St_ResInfo */
-		} else {
-			modeflag = pVBInfo->EModeIDTable[ModeIdIndex].
-					Ext_ModeFlag;
-			resinfo = pVBInfo->EModeIDTable[ModeIdIndex].
-					Ext_RESINFO; /* si+Ext_ResInfo */
-		}
+		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
 		if (pVBInfo->VBInfo & SetCRT2ToTV) {
 			temp = xgifb_reg_get(pVBInfo->P3d4, 0x35);
@@ -3380,15 +3004,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 	pVBInfo->LCDTypeInfo = 0;
 	pVBInfo->LCDInfo = 0;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ModeFlag // */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		/* si+Ext_ResInfo // */
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo // */
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	temp = xgifb_reg_get(pVBInfo->P3d4, 0x36); /* Get LCD Res.Info */
 	tempbx = temp & 0x0F;
 
@@ -3442,8 +3060,8 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 
 	if (pVBInfo->IF_DEF_LVDS == 0) {
 		if ((pVBInfo->LCDResInfo == Panel_1400x1050) && (pVBInfo->VBInfo
-				& SetCRT2ToLCD) && (ModeNo > 0x13) && (resinfo
-				== 9) && (!(tempbx & EnableScalingLCD)))
+				& SetCRT2ToLCD) && (resinfo == 9) &&
+				(!(tempbx & EnableScalingLCD)))
 			/* set to center in 1280x1024 LCDB for Panel_1400x1050 */
 			tempbx |= SetLCDtoNonExpanding;
 	}
@@ -3453,12 +3071,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 			if (!(tempbx & SetLCDtoNonExpanding)) {
 				tempbx |= XGI_EnableLVDSDDA;
 			} else {
-				if (ModeNo > 0x13) {
-					if (pVBInfo->LCDResInfo
-							== Panel_1024x768) {
-						if (resinfo == 4) {/* 512x384 */
-							tempbx |= XGI_EnableLVDSDDA;
-						}
+				if (pVBInfo->LCDResInfo == Panel_1024x768) {
+					if (resinfo == 4) {/* 512x384 */
+						tempbx |= XGI_EnableLVDSDDA;
 					}
 				}
 			}
@@ -3474,56 +3089,17 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 
 	pVBInfo->LCDInfo = tempbx;
 
-	if (pVBInfo->IF_DEF_LVDS == 0) {
-		if (tempax & (LockLCDBToA | StLCDBToA)) {
-			if (pVBInfo->VBInfo & SetInSlaveMode) {
-				if (!(tempax & LockLCDBToA)) {
-					if (ModeNo <= 0x13) {
-						pVBInfo->VBInfo &=
-							~(SetSimuScanMode |
-							  SetInSlaveMode |
-							  SetCRT2ToLCD);
-						pVBInfo->VBInfo |=
-							XGI_SetCRT2ToLCDA |
-							SetCRT2ToDualEdge;
-					}
-				}
-			}
-		}
-	}
-
 	return 1;
 }
 
 unsigned char XGI_SearchModeID(unsigned short ModeNo,
 		unsigned short *ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-	if (ModeNo <= 5)
-		ModeNo |= 1;
-	if (ModeNo <= 0x13) {
-		for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
-			if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID ==
-			    ModeNo)
-				break;
-			if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID ==
-			    0xFF)
-				return 0;
-		}
-
-		if (ModeNo == 0x07)
-			(*ModeIdIndex)++; /* 400 lines */
-		if (ModeNo <= 3)
-			(*ModeIdIndex) += 2; /* 400 lines */
-		/* else 350 lines */
-	} else {
-		for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
-			if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID ==
-			    ModeNo)
-				break;
-			if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID ==
-			    0xFF)
-				return 0;
-		}
+	for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo)
+			break;
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+			return 0;
 	}
 
 	return 1;
@@ -3789,22 +3365,17 @@ static void XGI_GetCRT2ResInfo(unsigned short ModeNo,
 {
 	unsigned short xres, yres, modeflag, resindex;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
-		if (modeflag & HalfDCLK)
-			xres *= 2;
+	if (modeflag & HalfDCLK)
+		xres *= 2;
 
-		if (modeflag & DoubleScanMode)
-			yres *= 2;
-	}
+	if (modeflag & DoubleScanMode)
+		yres *= 2;
 
 	if (pVBInfo->VBInfo & SetCRT2ToLCD) {
 		if (pVBInfo->IF_DEF_LVDS == 0) {
@@ -3868,37 +3439,23 @@ static void XGI_GetRAMDAC2DATA(unsigned short ModeNo,
 			       struct vb_device_info *pVBInfo)
 {
 	unsigned short tempax, tempbx, temp1, temp2, modeflag = 0, tempcx,
-			StandTableIndex, CRT1Index;
+			CRT1Index;
 
 	pVBInfo->RVBHCMAX = 1;
 	pVBInfo->RVBHCFACT = 1;
-
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		tempax = pVBInfo->StandTable[StandTableIndex].CRTC[0];
-		tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[6];
-		temp1 = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		temp1 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[0];
-		temp2 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[5];
-		tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8);
-		tempbx = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[8];
-		tempcx = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
-		tempcx &= 0x0100;
-		tempcx = tempcx << 2;
-		tempbx |= tempcx;
-		temp1 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[9];
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[0];
+	temp2 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5];
+	tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8);
+	tempbx = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[8];
+	tempcx = (unsigned short)
+			pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
+	tempcx &= 0x0100;
+	tempcx = tempcx << 2;
+	tempbx |= tempcx;
+	temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9];
 
 	if (temp1 & 0x01)
 		tempbx |= 0x0100;
@@ -3928,16 +3485,9 @@ static void XGI_GetCRT2Data(unsigned short ModeNo, unsigned short ModeIdIndex,
 	struct SiS_LCDData *LCDPtr = NULL;
 	struct SiS_TVData *TVPtr = NULL;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	pVBInfo->NewFlickerMode = 0;
 	pVBInfo->RVBHRS = 50;
 
@@ -4141,11 +3691,7 @@ static unsigned short XGI_GetColorDepth(unsigned short ModeNo,
 	short index;
 	unsigned short modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	index = (modeflag & ModeTypeMask) - ModeEGA;
 
 	if (index < 0)
@@ -4164,11 +3710,7 @@ static unsigned short XGI_GetOffset(unsigned short ModeNo,
 			ColorDepth[] = { 0x01, 0x02, 0x04 };
 
 	modeinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeInfo;
-	if (ModeNo <= 0x14)
-		infoflag = 0;
-	else
-		infoflag = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
 	index = (modeinfo >> 8) & 0xFF;
 
@@ -4228,12 +3770,9 @@ static void XGI_PreSetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempcx = 0, CRT1Index = 0, resinfo = 0;
 
-	if (ModeNo > 0x13) {
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
 	XGI_SetCRT2Offset(ModeNo, ModeIdIndex, RefreshRateTableIndex,
 			HwDeviceExtension, pVBInfo);
@@ -4254,17 +3793,10 @@ static void XGI_SetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned short temp = 0, tempax = 0, tempbx = 0, tempcx = 0,
 			pushbx = 0, CRT1Index = 0, modeflag, resinfo = 0;
 
-	if (ModeNo > 0x13) {
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	/* bainy change table name */
 	if (modeflag & HalfDCLK) {
@@ -4422,18 +3954,11 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned short push1, push2, tempax, tempbx = 0, tempcx, temp, resinfo,
 			modeflag, CRT1Index;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
 
 	if (!(pVBInfo->VBInfo & SetInSlaveMode))
 		return;
@@ -4500,8 +4025,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 			temp -= 6;
 			if (pVBInfo->TVInfo & TVSimuMode) {
 				temp -= 4;
-				if (ModeNo > 0x13)
-					temp -= 10;
+				temp -= 10;
 			}
 		}
 	} else {
@@ -4523,14 +4047,6 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 			if (pVBInfo->LCDResInfo != Panel_1280x960 &&
 			    pVBInfo->VGAHDE >= 800) {
 				temp -= 7;
-				if (pVBInfo->ModeType == ModeEGA &&
-				    pVBInfo->VGAVDE == 1024) {
-					temp += 15;
-					if (pVBInfo->LCDResInfo !=
-						Panel_1280x1024)
-						temp += 7;
-				}
-
 				if (pVBInfo->VGAHDE >= 1280 &&
 				    pVBInfo->LCDResInfo != Panel_1280x960 &&
 				    (pVBInfo->LCDInfo & LCDNonExpanding))
@@ -4546,48 +4062,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	if (pVBInfo->VBInfo & SetCRT2ToTV) {
 		if (pVBInfo->TVInfo & TVSimuMode) {
-			if ((ModeNo == 0x06) || (ModeNo == 0x10) || (ModeNo
-					== 0x11) || (ModeNo == 0x13) || (ModeNo
-					== 0x0F)) {
-				xgifb_reg_set(pVBInfo->Part1Port, 0x07, 0x5b);
-				xgifb_reg_set(pVBInfo->Part1Port, 0x08, 0x03);
-			}
-
-			if ((ModeNo == 0x00) || (ModeNo == 0x01)) {
-				if (pVBInfo->TVInfo & SetNTSCTV) {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x2A);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x61);
-				} else {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x2A);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x41);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x0C, 0xF0);
-				}
-			}
-
-			if ((ModeNo == 0x02) || (ModeNo == 0x03) || (ModeNo
-					== 0x07)) {
-				if (pVBInfo->TVInfo & SetNTSCTV) {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x54);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x00);
-				} else {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x55);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x00);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x0C, 0xF0);
-				}
-			}
-
-			if ((ModeNo == 0x04) || (ModeNo == 0x05) || (ModeNo
-					== 0x0D) || (ModeNo == 0x50)) {
+			if (ModeNo == 0x50) {
 				if (pVBInfo->TVInfo & SetNTSCTV) {
 					xgifb_reg_set(pVBInfo->Part1Port,
 							0x07, 0x30);
@@ -4796,18 +4271,10 @@ static void XGI_SetGroup2(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	unsigned long longtemp, tempeax, tempebx, temp2, tempecx;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-		crt2crtc = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT2CRTC;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	tempax = 0;
 
@@ -5245,18 +4712,11 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	struct XGI_LCDDesStruct *LCDBDesPtr = NULL;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-			Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
 
 	if (!(pVBInfo->VBInfo & SetCRT2ToLCD))
 		return;
@@ -5274,16 +4734,6 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	xgifb_reg_and_or(pVBInfo->Part2Port, 0x2B, 0x0F, temp);
 	temp = 0x01;
 
-	if (pVBInfo->LCDResInfo == Panel_1280x1024) {
-		if (pVBInfo->ModeType == ModeEGA) {
-			if (pVBInfo->VGAHDE >= 1024) {
-				temp = 0x02;
-				if (pVBInfo->LCDInfo & XGI_LCDVESATiming)
-					temp = 0x01;
-			}
-		}
-	}
-
 	xgifb_reg_set(pVBInfo->Part2Port, 0x0B, temp);
 	tempbx = pVBInfo->VDE; /* RTVACTEO=(VDE-1)&0xFF */
 	push1 = tempbx;
@@ -5542,12 +4992,8 @@ static void XGI_SetGroup3(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned char *tempdi;
 	unsigned short modeflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	xgifb_reg_set(pVBInfo->Part3Port, 0x00, 0x00);
 	if (pVBInfo->TVInfo & TVSetPAL) {
@@ -5605,13 +5051,8 @@ static void XGI_SetGroup4(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	unsigned long tempebx, tempeax, templong;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	temp = pVBInfo->RVBHCFACT;
 	xgifb_reg_set(pVBInfo->Part4Port, 0x13, temp);
 
@@ -5818,32 +5259,22 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info,
 {
 	unsigned short xres, yres, colordepth, modeflag, resindex;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	}
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if (!(modeflag & Charx8Dot)) {
 		xres /= 9;
 		xres *= 8;
 	}
 
-	if (ModeNo > 0x13) {
-		if ((ModeNo > 0x13) && (modeflag & HalfDCLK))
-			xres *= 2;
-
-		if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
-			yres *= 2;
+	if ((ModeNo > 0x13) && (modeflag & HalfDCLK))
+		xres *= 2;
 
-	}
+	if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
+		yres *= 2;
 
 	if (xres > xgifb_info->lvds_data.LVDSHDE)
 		return 0;
@@ -5851,16 +5282,11 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info,
 	if (yres > xgifb_info->lvds_data.LVDSVDE)
 		return 0;
 
-	if (ModeNo > 0x13) {
-		if (xres != xgifb_info->lvds_data.LVDSHDE ||
-		    yres != xgifb_info->lvds_data.LVDSVDE) {
-			colordepth = XGI_GetColorDepth(ModeNo,
-						       ModeIdIndex,
-						       pVBInfo);
-			if (colordepth > 2)
-				return 0;
-
-		}
+	if (xres != xgifb_info->lvds_data.LVDSHDE ||
+	    yres != xgifb_info->lvds_data.LVDSVDE) {
+		colordepth = XGI_GetColorDepth(ModeNo, ModeIdIndex, pVBInfo);
+		if (colordepth > 2)
+			return 0;
 	}
 	return 1;
 }
@@ -5895,18 +5321,11 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	else
 		XGI_SetXG21FPBits(pVBInfo);
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	}
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if (!(modeflag & Charx8Dot))
 		xres = xres * 8 / 9;
@@ -5914,8 +5333,6 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	LVDSHT = xgifb_info->lvds_data.LVDSHT;
 
 	LVDSHBS = xres + (xgifb_info->lvds_data.LVDSHDE - xres) / 2;
-	if ((ModeNo <= 0x13) && (modeflag & HalfDCLK))
-		LVDSHBS -= xres / 4;
 
 	if (LVDSHBS > LVDSHT)
 		LVDSHBS -= LVDSHT;
@@ -5933,7 +5350,7 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	LVDSVT = xgifb_info->lvds_data.LVDSVT;
 
 	LVDSVBS = yres + (xgifb_info->lvds_data.LVDSVDE - yres) / 2;
-	if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
+	if (modeflag & DoubleScanMode)
 		LVDSVBS += yres / 2;
 
 	if (LVDSVBS > LVDSVT)
@@ -6527,7 +5944,7 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo,
 			       unsigned short ModeIdIndex,
 			       struct vb_device_info *pVBInfo)
 {
-	unsigned short tempbx, index;
+	unsigned short tempbx;
 
 	unsigned char tempah;
 
@@ -6536,13 +5953,6 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo,
 
 	tempbx = XGI_GetTVPtrIndex(pVBInfo);
 	tempbx &= 0xFE;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVFlickerIndex;
-	else
-		index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVFlickerIndex;
-
-	tempbx += index;
 	tempah = TVAntiFlickList[tempbx];
 	tempah = tempah << 4;
 
@@ -6553,19 +5963,12 @@ static void XGI_SetEdgeEnhance(unsigned short ModeNo,
 			       unsigned short ModeIdIndex,
 			       struct vb_device_info *pVBInfo)
 {
-	unsigned short tempbx, index;
+	unsigned short tempbx;
 
 	unsigned char tempah;
 
 	tempbx = XGI_GetTVPtrIndex(pVBInfo);
 	tempbx &= 0xFE;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVEdgeIndex;
-	else
-		index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVEdgeIndex;
-
-	tempbx += index;
 	tempah = TVEdgeList[tempbx];
 	tempah = tempah << 5;
 
@@ -6631,13 +6034,7 @@ static void XGI_SetYFilter(unsigned short ModeNo, unsigned short ModeIdIndex,
 		return;
 	}
 
-	if (ModeNo <= 0x13)
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].
-				VB_StTVYFilterIndex;
-	else
-		tempal = pVBInfo->EModeIDTable[ModeIdIndex].
-				VB_ExtTVYFilterIndex;
-
+	tempal = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex;
 	if (tempcl == 0)
 		index = tempal * 4;
 	else
@@ -6712,16 +6109,14 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo,
 		if (pVBInfo->VBInfo & (SetCRT2ToRAMDAC | SetCRT2ToTV
 				| SetCRT2ToLCD)) {
 			tempah = 0x40; /* BTDRAM */
-			if (ModeNo > 0x13) {
-				tempcl = pVBInfo->ModeType;
-				tempcl -= ModeVGA;
-				if (tempcl >= 0) {
-					/* BT Color */
-					tempah = (0x008 >> tempcl);
-					if (tempah == 0)
-						tempah = 1;
-					tempah |= 0x040;
-				}
+			tempcl = pVBInfo->ModeType;
+			tempcl -= ModeVGA;
+			if (tempcl >= 0) {
+				/* BT Color */
+				tempah = (0x008 >> tempcl);
+				if (tempah == 0)
+					tempah = 1;
+				tempah |= 0x040;
 			}
 			if (pVBInfo->VBInfo & SetInSlaveMode)
 				tempah ^= 0x50; /* BTDAC */
@@ -6797,10 +6192,8 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo,
 
 		if (pVBInfo->VBInfo & SetCRT2ToTV) {
 			tempah |= 0x020;
-			if (ModeNo > 0x13) {
-				if (pVBInfo->VBInfo & DriverMode)
-					tempah = tempah ^ 0x20;
-			}
+			if (pVBInfo->VBInfo & DriverMode)
+				tempah = tempah ^ 0x20;
 		}
 
 		xgifb_reg_and_or(pVBInfo->Part4Port, 0x0D, ~0x0BF, tempah);
@@ -6925,13 +6318,7 @@ unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
 
 	unsigned short RefreshRateTableIndex, i, modeflag, index, temp;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
-	if (ModeNo < 0x14)
-		return 0xFFFF;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	index = xgifb_reg_get(pVBInfo->P3d4, 0x33);
 	index = index >> pVBInfo->SelectCRT2Rate;
@@ -7297,16 +6684,13 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info,
 		unsigned short ModeNo, unsigned short ModeIdIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned short StandTableIndex, RefreshRateTableIndex, b3CC, temp;
+	unsigned short RefreshRateTableIndex, temp;
 
-	unsigned short XGINew_P3cc = pVBInfo->P3cc;
-
-	StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-	XGI_SetSeqRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo);
-	outb(pVBInfo->StandTable[StandTableIndex].MISC, pVBInfo->P3c2);
-	XGI_SetCRTCRegs(HwDeviceExtension, StandTableIndex, pVBInfo);
-	XGI_SetATTRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo);
-	XGI_SetGRCRegs(StandTableIndex, pVBInfo);
+	XGI_SetSeqRegs(ModeNo, ModeIdIndex, pVBInfo);
+	outb(pVBInfo->StandTable->MISC, pVBInfo->P3c2);
+	XGI_SetCRTCRegs(HwDeviceExtension, pVBInfo);
+	XGI_SetATTRegs(ModeNo, ModeIdIndex, pVBInfo);
+	XGI_SetGRCRegs(pVBInfo);
 	XGI_ClearExt1Regs(pVBInfo);
 
 	if (HwDeviceExtension->jChipType == XG27) {
@@ -7340,22 +6724,6 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info,
 				RefreshRateTableIndex, pVBInfo);
 	}
 
-	if ((HwDeviceExtension->jChipType >= XG20) &&
-	    (HwDeviceExtension->jChipType < XG27)) { /* fix H/W DCLK/2 bug */
-		if ((ModeNo == 0x00) | (ModeNo == 0x01)) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x4E);
-			xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE9);
-			b3CC = (unsigned char) inb(XGINew_P3cc);
-			outb((b3CC |= 0x0C), XGINew_P3cc);
-		} else if ((ModeNo == 0x04) | (ModeNo == 0x05) | (ModeNo
-				== 0x0D)) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x1B);
-			xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE3);
-			b3CC = (unsigned char) inb(XGINew_P3cc);
-			outb((b3CC |= 0x0C), XGINew_P3cc);
-		}
-	}
-
 	if (HwDeviceExtension->jChipType >= XG21) {
 		temp = xgifb_reg_get(pVBInfo->P3d4, 0x38);
 		if (temp & 0xA0) {
@@ -7394,7 +6762,7 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info,
 	unsigned short ModeIdIndex;
 	struct vb_device_info VBINF;
 	struct vb_device_info *pVBInfo = &VBINF;
-	pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress;
+	pVBInfo->BaseAddr = xgifb_info->vga_base;
 	pVBInfo->IF_DEF_LVDS = 0;
 	pVBInfo->IF_DEF_LCDA = 1;
 
@@ -7509,13 +6877,8 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info,
 						   pVBInfo))
 				return 0;
 
-		if (ModeNo <= 0x13) {
-			pVBInfo->ModeType = pVBInfo->SModeIDTable[ModeIdIndex].
-						St_ModeFlag & ModeTypeMask;
-		} else {
-			pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex].
+		pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex].
 						Ext_ModeFlag & ModeTypeMask;
-		}
 
 		pVBInfo->SetFlag = 0;
 		pVBInfo->VBInfo = DisableCRT2Display;
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index a5bd56af92b1..38f47ffc69c4 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -10,28 +10,11 @@ struct XGI_LVDSCRT1VDataStruct {
 	unsigned char Reg[7];
 };
 
-struct XGI_StStruct {
-	unsigned char St_ModeID;
-	unsigned short St_ModeFlag;
-	unsigned char St_StTableIndex;
-	unsigned char St_CRT2CRTC;
-	unsigned char St_CRT2CRTC2;
-	unsigned char St_ResInfo;
-	unsigned char VB_StTVFlickerIndex;
-	unsigned char VB_StTVEdgeIndex;
-	unsigned char VB_StTVYFilterIndex;
-};
-
 struct XGI_ExtStruct {
 	unsigned char Ext_ModeID;
 	unsigned short Ext_ModeFlag;
 	unsigned short Ext_ModeInfo;
-	unsigned short Ext_Point;
-	unsigned short Ext_VESAID;
-	unsigned char Ext_VESAMEMSize;
 	unsigned char Ext_RESINFO;
-	unsigned char VB_ExtTVFlickerIndex;
-	unsigned char VB_ExtTVEdgeIndex;
 	unsigned char VB_ExtTVYFilterIndex;
 	unsigned char REFindex;
 };
@@ -68,14 +51,6 @@ struct XGI_LCDDataTablStruct {
 	unsigned short DATAPTR;
 };
 
-struct XGI330_LCDDataDesStruct {
-	unsigned short LCDHDES;
-	unsigned short LCDHRS;
-	unsigned short LCDVDES;
-	unsigned short LCDVRS;
-};
-
-
 struct XGI330_LVDSDataStruct {
 	unsigned short VGAHT;
 	unsigned short VGAVT;
@@ -236,7 +211,6 @@ struct vb_device_info {
 
 	void __iomem *FBAddr;
 	unsigned long BaseAddr;
-	unsigned long RelIO;
 
 	unsigned char (*CR6B)[4];
 	unsigned char (*CR6E)[4];
@@ -314,7 +288,6 @@ struct vb_device_info {
 	struct XGI_TimingHStruct  *TimingH;
 	struct XGI_TimingVStruct  *TimingV;
 
-	struct XGI_StStruct          *SModeIDTable;
 	struct SiS_StandTable_S  *StandTable;
 	struct XGI_ExtStruct         *EModeIDTable;
 	struct XGI_Ext2Struct        *RefIndex;
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
index e8d6f674b274..d22e599cb305 100644
--- a/drivers/staging/xgifb/vb_table.h
+++ b/drivers/staging/xgifb/vb_table.h
@@ -135,609 +135,92 @@ static unsigned char XGI330_SR33;
 static unsigned char XG40_CRCF = 0x13;
 static unsigned char XG40_DRAMTypeDefinition = 0xFF ;
 
-static struct XGI_StStruct XGI330_SModeIDTable[] = {
-	{0x01, 0x9208, 0x01, 0x00, 0x10, 0x00, 0x00, 0x01, 0x00},
-	{0x01, 0x1210, 0x14, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00},
-	{0x01, 0x1010, 0x17, 0x02, 0x11, 0x00, 0x00, 0x01, 0x01},
-	{0x03, 0x8208, 0x03, 0x00, 0x14, 0x00, 0x00, 0x01, 0x02},
-	{0x03, 0x0210, 0x16, 0x01, 0x04, 0x01, 0x00, 0x01, 0x02},
-	{0x03, 0x0010, 0x18, 0x02, 0x15, 0x00, 0x00, 0x01, 0x03},
-	{0x05, 0x9209, 0x05, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04},
-	{0x06, 0x8209, 0x06, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05},
-	{0x07, 0x0000, 0x07, 0x03, 0x05, 0x03, 0x00, 0x01, 0x03},
-	{0x07, 0x0000, 0x19, 0x02, 0x15, 0x02, 0x00, 0x01, 0x03},
-	{0x0d, 0x920a, 0x0d, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04},
-	{0x0e, 0x820a, 0x0e, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05},
-	{0x0f, 0x0202, 0x11, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05},
-	{0x10, 0x0212, 0x12, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05},
-	{0x11, 0x0212, 0x1a, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05},
-	{0x12, 0x0212, 0x1b, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05},
-	{0x13, 0x021b, 0x1c, 0x00, 0x14, 0x00, 0x00, 0x00, 0x04},
-	{0x12, 0x0010, 0x18, 0x02, 0x24, 0x02, 0x00, 0x00, 0x05},/* St_CRT2CRTC2
-								    not sure */
-	{0x12, 0x0210, 0x18, 0x01, 0x24, 0x01, 0x00, 0x00, 0x05},/* St_CRT2CRTC2
-								    not sure */
-	{0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
-};
-
-
 static struct XGI_ExtStruct XGI330_EModeIDTable[] = {
-	{0x6a, 0x2212, 0x0407, 0x3a81, 0x0102, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x2e, 0x0a1b, 0x0306, 0x3a57, 0x0101, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x2f, 0x0a1b, 0x0305, 0x3a50, 0x0100, 0x08,
-		0x05, 0x00, 0x00, 0x05, 0x05},
-	{0x30, 0x2a1b, 0x0407, 0x3a81, 0x0103, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x31, 0x0a1b, 0x030d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x32, 0x0a1b, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x33, 0x0a1d, 0x0a0d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x34, 0x2a1d, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x35, 0x0a1f, 0x0a0d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x36, 0x2a1f, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x37, 0x0212, 0x0508, 0x3aab, 0x0104, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x38, 0x0a1b, 0x0508, 0x3aab, 0x0105, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x3a, 0x0e3b, 0x0609, 0x3adc, 0x0107, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x3c, 0x0e3b, 0x070a, 0x3af2, 0x0130, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x2e, 0x0a1b, 0x0306, 0x06, 0x05, 0x06},
+	{0x2f, 0x0a1b, 0x0305, 0x05, 0x05, 0x05},
+	{0x30, 0x2a1b, 0x0407, 0x07, 0x07, 0x0e},
+	{0x31, 0x0a1b, 0x030d, 0x0d, 0x06, 0x3d},
+	{0x32, 0x0a1b, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x33, 0x0a1d, 0x0a0d, 0x0d, 0x06, 0x3d},
+	{0x34, 0x2a1d, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x35, 0x0a1f, 0x0a0d, 0x0d, 0x06, 0x3d},
+	{0x36, 0x2a1f, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x38, 0x0a1b, 0x0508, 0x08, 0x00, 0x16},
+	{0x3a, 0x0e3b, 0x0609, 0x09, 0x00, 0x1e},
+	{0x3c, 0x0e3b, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE [2003/10/07] */
-	{0x3d, 0x0e7d, 0x070a, 0x3af2, 0x0131, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x3d, 0x0e7d, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE */
-	{0x40, 0x9a1c, 0x0000, 0x3a34, 0x010d, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},
-	{0x41, 0x9a1d, 0x0000, 0x3a34, 0x010e, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},	/* ModeIdIndex = 0x10 */
-	{0x43, 0x0a1c, 0x0306, 0x3a57, 0x0110, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x44, 0x0a1d, 0x0306, 0x3a57, 0x0111, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x46, 0x2a1c, 0x0407, 0x3a81, 0x0113, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x47, 0x2a1d, 0x0407, 0x3a81, 0x0114, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x49, 0x0a3c, 0x0508, 0x3aab, 0x0116, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x4a, 0x0a3d, 0x0508, 0x3aab, 0x0117, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x4c, 0x0e7c, 0x0609, 0x3adc, 0x0119, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x4d, 0x0e7d, 0x0609, 0x3adc, 0x011a, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x50, 0x9a1b, 0x0001, 0x3a3b, 0x0132, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x02},
-	{0x51, 0xba1b, 0x0103, 0x3a42, 0x0133, 0x08,
-		0x03, 0x00, 0x00, 0x07, 0x03},
-	{0x52, 0x9a1b, 0x0204, 0x3a49, 0x0134, 0x08,
-		0x04, 0x00, 0x00, 0x00, 0x04},
-	{0x56, 0x9a1d, 0x0001, 0x3a3b, 0x0135, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x02},
-	{0x57, 0xba1d, 0x0103, 0x3a42, 0x0136, 0x08,
-		0x03, 0x00, 0x00, 0x07, 0x03},
-	{0x58, 0x9a1d, 0x0204, 0x3a49, 0x0137, 0x08,
-		0x04, 0x00, 0x00, 0x00, 0x04},
-	{0x59, 0x9a1b, 0x0000, 0x3a34, 0x0138, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},
-	{0x5A, 0x021b, 0x0014, 0x3b83, 0x0138, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x3f},	/* ModeIdIndex = 0x20 */
-	{0x5B, 0x0a1d, 0x0014, 0x3b83, 0x0135, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x3f},
-	{0x5d, 0x0a1d, 0x0305, 0x3a50, 0x0139, 0x08,
-		0x05, 0x00, 0x00, 0x07, 0x05},
-	{0x62, 0x0a3f, 0x0306, 0x3a57, 0x013a, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x63, 0x2a3f, 0x0407, 0x3a81, 0x013b, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x64, 0x0a7f, 0x0508, 0x3aab, 0x013c, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x65, 0x0eff, 0x0609, 0x3adc, 0x013d, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x66, 0x0eff, 0x070a, 0x3af2, 0x013e, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x40, 0x9a1c, 0x0000, 0x00, 0x04, 0x00},
+	{0x41, 0x9a1d, 0x0000, 0x00, 0x04, 0x00},
+	{0x43, 0x0a1c, 0x0306, 0x06, 0x05, 0x06},
+	{0x44, 0x0a1d, 0x0306, 0x06, 0x05, 0x06},
+	{0x46, 0x2a1c, 0x0407, 0x07, 0x07, 0x0e},
+	{0x47, 0x2a1d, 0x0407, 0x07, 0x07, 0x0e},
+	{0x49, 0x0a3c, 0x0508, 0x08, 0x00, 0x16},
+	{0x4a, 0x0a3d, 0x0508, 0x08, 0x00, 0x16},
+	{0x4c, 0x0e7c, 0x0609, 0x09, 0x00, 0x1e},
+	{0x4d, 0x0e7d, 0x0609, 0x09, 0x00, 0x1e},
+	{0x50, 0x9a1b, 0x0001, 0x01, 0x04, 0x02},
+	{0x51, 0xba1b, 0x0103, 0x03, 0x07, 0x03},
+	{0x52, 0x9a1b, 0x0204, 0x04, 0x00, 0x04},
+	{0x56, 0x9a1d, 0x0001, 0x01, 0x04, 0x02},
+	{0x57, 0xba1d, 0x0103, 0x03, 0x07, 0x03},
+	{0x58, 0x9a1d, 0x0204, 0x04, 0x00, 0x04},
+	{0x59, 0x9a1b, 0x0000, 0x00, 0x04, 0x00},
+	{0x5A, 0x021b, 0x0014, 0x01, 0x04, 0x3f},
+	{0x5B, 0x0a1d, 0x0014, 0x01, 0x04, 0x3f},
+	{0x5d, 0x0a1d, 0x0305, 0x05, 0x07, 0x05},
+	{0x62, 0x0a3f, 0x0306, 0x06, 0x05, 0x06},
+	{0x63, 0x2a3f, 0x0407, 0x07, 0x07, 0x0e},
+	{0x64, 0x0a7f, 0x0508, 0x08, 0x00, 0x16},
+	{0x65, 0x0eff, 0x0609, 0x09, 0x00, 0x1e},
+	{0x66, 0x0eff, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE */
-	{0x68, 0x067b, 0x080b, 0x3b17, 0x013f, 0x08,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x69, 0x06fd, 0x080b, 0x3b17, 0x0140, 0x08,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x6b, 0x07ff, 0x080b, 0x3b17, 0x0141, 0x10,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x6c, 0x067b, 0x090c, 0x3b37, 0x0000, 0x08,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x6d, 0x06fd, 0x090c, 0x3b37, 0x0000, 0x10,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x6e, 0x07ff, 0x090c, 0x3b37, 0x0000, 0x10,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x70, 0x2a1b, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x71, 0x0a1b, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},
-	{0x74, 0x0a1d, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},	/* ModeIdIndex = 0x30 */
-	{0x75, 0x0a3d, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x76, 0x2a1f, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x77, 0x0a1f, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},
-	{0x78, 0x0a3f, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x79, 0x0a3b, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x7a, 0x2a1d, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x7b, 0x0e3b, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x7c, 0x0e7d, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x7d, 0x0eff, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x20, 0x0e3b, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x21, 0x0e7d, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x22, 0x0eff, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x23, 0x0e3b, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x24, 0x0e7d, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x25, 0x0eff, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x26, 0x063b, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},	/* ModeIdIndex = 0x40 */
-	{0x27, 0x067d, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},
-	{0x28, 0x06ff, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},
-	{0xff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00}
-};
-
-static struct SiS_StandTable_S XGI330_StandTable[] = {
-/* MD_0_200 */
-	{
-		0x28, 0x18, 0x08, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_1_200 */
-	{
-		0x28, 0x18, 0x08, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_200 */
-	{
-		0x50, 0x18, 0x08, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_3_200 */
-	{
-		0x50, 0x18, 0x08, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_4 */
-	{
-		0x28, 0x18, 0x08, 0x4000,
-		{0x09, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2,
-		 0xff},
-		{0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x03, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00,
-		 0xff}
-	},
-/* MD_5 */
-	{
-		0x28, 0x18, 0x08, 0x4000,
-		{0x09, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2,
-		 0xff},
-		{0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x03, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00,
-		 0xff}
-	},
-/* MD_6 */
-	{
-		0x50, 0x18, 0x08, 0x4000,
-		{0x01, 0x01, 0x00, 0x06},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xc2,
-		 0xff},
-		{0x00, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
-		 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
-		 0x01, 0x00, 0x01, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00,
-		 0xff}
-	},
-/* MD_7 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x00, 0x03, 0x00, 0x03},
-		 0xa6,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x0d, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-		 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-		 0x0e, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00,
-		 0xff}
-	},
-/* MDA_DAC */
-	{
-		0x00, 0x00, 0x00, 0x0000,
-		{0x00, 0x00, 0x00, 0x15},
-		 0x15,
-		{0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x3f, 0x3f,
-		 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00,
-		 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15},
-		{0x15, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x3f}
-	},
-/* CGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x09, 0x15, 0x00},
-		 0x10,
-		{0x04, 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a,
-		 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x2a, 0x3a,
-		 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x10,
-		 0x04},
-		{0x14, 0x01, 0x11, 0x09, 0x15, 0x00, 0x10, 0x04,
-		 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a, 0x2e,
-		 0x3e, 0x2b, 0x3b, 0x2f},
-		{0x3f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f,
-		 0x3f}
-	},
-/* EGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x05, 0x15, 0x20},
-		 0x30,
-		{0x24, 0x34, 0x21, 0x31, 0x25, 0x35, 0x08, 0x18,
-		 0x0c, 0x1c, 0x09, 0x19, 0x0d, 0x1d, 0x28, 0x38,
-		 0x2c, 0x3c, 0x29, 0x39, 0x2d, 0x3d, 0x02, 0x12,
-		 0x06},
-		{0x16, 0x03, 0x13, 0x07, 0x17, 0x22, 0x32, 0x26,
-		 0x36, 0x23, 0x33, 0x27, 0x37, 0x0a, 0x1a, 0x0e,
-		 0x1e, 0x0b, 0x1b, 0x0f},
-		{0x1f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f,
-		 0x3f}
-	},
-/* VGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x09, 0x15, 0x2a},
-		 0x3a,
-		{0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x05,
-		 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x18, 0x1c, 0x20,
-		 0x24, 0x28, 0x2d, 0x32, 0x38, 0x3f, 0x00, 0x10,
-		 0x1f},
-		{0x2f, 0x3f, 0x1f, 0x27, 0x2f, 0x37, 0x3f, 0x2d,
-		 0x31, 0x36, 0x3a, 0x3f, 0x00, 0x07, 0x0e, 0x15,
-		 0x1c, 0x0e, 0x11, 0x15},
-		{0x18, 0x1c, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x00,
-		 0x04}
-	},
-	{
-		0x08, 0x0c, 0x10, 0x0a08,
-		{0x0c, 0x0e, 0x10, 0x0b},
-		 0x0c,
-		{0x0d, 0x0f, 0x10, 0x10, 0x01, 0x08, 0x00, 0x00,
-		 0x00, 0x00, 0x01, 0x00, 0x02, 0x02, 0x01, 0x00,
-		 0x04, 0x04, 0x01, 0x00, 0x05, 0x02, 0x05, 0x00,
-		 0x06},
-		{0x01, 0x06, 0x05, 0x06, 0x00, 0x08, 0x01, 0x08,
-		 0x00, 0x07, 0x02, 0x07, 0x06, 0x07, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00}
-	},
-/* MD_D */
-	{
-		0x28, 0x18, 0x08, 0x2000,
-		{0x09, 0x0f, 0x00, 0x06},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_E */
-	{
-		0x50, 0x18, 0x08, 0x4000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
+	{0x68, 0x067b, 0x080b, 0x0b, 0x00, 0x29},
+	{0x69, 0x06fd, 0x080b, 0x0b, 0x00, 0x29},
+	{0x6b, 0x07ff, 0x080b, 0x0b, 0x00, 0x29},
+	{0x6c, 0x067b, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x6d, 0x06fd, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x6e, 0x07ff, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x70, 0x2a1b, 0x0410, 0x10, 0x07, 0x34},
+	{0x71, 0x0a1b, 0x0511, 0x11, 0x00, 0x37},
+	{0x74, 0x0a1d, 0x0511, 0x11, 0x00, 0x37},
+	{0x75, 0x0a3d, 0x0612, 0x12, 0x00, 0x3a},
+	{0x76, 0x2a1f, 0x0410, 0x10, 0x07, 0x34},
+	{0x77, 0x0a1f, 0x0511, 0x11, 0x00, 0x37},
+	{0x78, 0x0a3f, 0x0612, 0x12, 0x00, 0x3a},
+	{0x79, 0x0a3b, 0x0612, 0x12, 0x00, 0x3a},
+	{0x7a, 0x2a1d, 0x0410, 0x10, 0x07, 0x34},
+	{0x7b, 0x0e3b, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x7c, 0x0e7d, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x7d, 0x0eff, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x20, 0x0e3b, 0x0D16, 0x16, 0x00, 0x43},
+	{0x21, 0x0e7d, 0x0D16, 0x16, 0x00, 0x43},
+	{0x22, 0x0eff, 0x0D16, 0x16, 0x00, 0x43},
+	{0x23, 0x0e3b, 0x0614, 0x14, 0x00, 0x41},
+	{0x24, 0x0e7d, 0x0614, 0x14, 0x00, 0x41},
+	{0x25, 0x0eff, 0x0614, 0x14, 0x00, 0x41},
+	{0x26, 0x063b, 0x0c15, 0x15, 0x00, 0x42},
+	{0x27, 0x067d, 0x0c15, 0x15, 0x00, 0x42},
+	{0x28, 0x06ff, 0x0c15, 0x15, 0x00, 0x42},
+	{0xff, 0x0000, 0x0000, 0x00, 0x00, 0x00}
+};
+
+static struct SiS_StandTable_S XGI330_StandTable = {
 /* ExtVGATable */
-	{
-		0x00, 0x00, 0x00, 0x0000,
-		{0x01, 0x0f, 0x00, 0x0e},
-		 0x23,
-		{0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-		 0x01, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
-		 0xff}
-	},
-/* ROM_SAVEPTR */
-	{
-		0x9f, 0x3b, 0x00, 0x00c0,
-		{0x00, 0x00, 0x00, 0x00},
-		 0x00,
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbb, 0x3f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x1a, 0x00, 0xac, 0x3e, 0x00, 0xc0,
-		 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00}
-	},
-/* MD_F */
-	{
-		0x50, 0x18, 0x0e, 0x8000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xa2,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3,
-		 0xff},
-		{0x00, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-		 0x00, 0x08, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00,
-		 0x0b, 0x00, 0x05, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05,
-		 0xff}
-	},
-/* MD_10 */
-	{
-		0x50, 0x18, 0x0e, 0x8000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_0_350 */
-	{
-		0x28, 0x18, 0x0e, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_1_350 */
-	{
-		0x28, 0x18, 0x0e, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_350 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_3_350 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_0_1_400 */
-	{
-		0x28, 0x18, 0x10, 0x0800,
-		{0x08, 0x03, 0x00, 0x02},
-		 0x67,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x0c, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_3_400 */
-	{
-		0x50, 0x18, 0x10, 0x1000,
-		{0x00, 0x03, 0x00, 0x02},
-		 0x67,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x0c, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_7_400 */
-	{
-		0x50, 0x18, 0x10, 0x1000,
-		{0x00, 0x03, 0x00, 0x02},
-		 0x66,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x0f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-		 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-		 0x0e, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00,
-		 0xff}
-	},
-/* MD_11 */
-	{
-		0x50, 0x1d, 0x10, 0xa000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xe3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xc3,
-		 0xff},
-		{0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x01,
-		 0xff}
-	},
-/* ExtEGATable */
-	{
-		0x50, 0x1d, 0x10, 0xa000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xe3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_13 */
-	{
-		0x28, 0x18, 0x08, 0x2000,
-		{0x01, 0x0f, 0x00, 0x0e},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x41, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x40, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-		 0x41, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
-		 0xff}
-	}
+	0x00, 0x00, 0x00, 0x0000,
+	{0x01, 0x0f, 0x00, 0x0e},
+	 0x23,
+	{0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+	 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+	 0xff},
+	{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+	 0x01, 0x00, 0x00, 0x00},
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
+	 0xff}
 };
 
 static struct XGI_TimingHStruct XGI_TimingH[1];
@@ -1143,7 +626,7 @@ static struct XGI330_LCDDataStruct  XGI_NoScalingDatax75[] = {
 	{1, 1, 1688, 806,  1688, 806}   /* ; 0A (1280x768x75Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1024x768Data[] = {
 	{9, 1057, 0,   771}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1057, 0,   771}, /* ; 01 (320x350,640x350) */
 	{9, 1057, 0,   771}, /* ; 02 (360x400,720x400) */
@@ -1153,7 +636,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[] = {
 	{9, 1057, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1024x768Data[] = {
 	{9, 1057, 737, 703}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1057, 686, 651}, /* ; 01 (320x350,640x350) */
 	{9, 1057, 737, 703}, /* ; 02 (360x400,720x400) */
@@ -1163,7 +646,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[] = {
 	{9, 1057, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768Data[] = {
 	{1152, 856,  622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1152, 856,  597, 562}, /* ; 01 (320x350,640x350) */
 	{1152, 856,  622, 587}, /* ; 02 (360x400,720x400) */
@@ -1173,7 +656,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[] = {
 	{0,    1048, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
 	{18, 1346, 981,  940},  /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1346, 926,  865},  /* 01 (320x350,640x350) */
 	{18, 1346, 981,  940},  /* 02 (360x400,720x400) */
@@ -1184,7 +667,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
 	{18, 1346, 1065, 1024}  /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDLDes1280x1024Data[] = {
 	{18, 1346, 970,  907},  /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1346, 917,  854},  /* 01 (320x350,640x350) */
 	{18, 1346, 970,  907},  /* 02 (360x400,720x400) */
@@ -1195,7 +678,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = {
 	{18, 1346, 1065, 1024}  /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024Data[] = {
 	{1368, 1008, 752,  711}, /* 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729,  688}, /* 01 (320x350,640x350) */
 	{1368, 1008, 752,  711}, /* 02 (360x400,720x400) */
@@ -1206,7 +689,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[] = {
 	{18,   1346, 1065, 1024} /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1280x1024Data[] = {
 	{9, 1337, 981,  940},  /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1337, 926,  884},  /* ; 01 (320x350,640x350) alan, 2003/09/30 */
 	{9, 1337, 981,  940},  /* ; 02 (360x400,720x400) */
@@ -1217,7 +700,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[] = {
 	{9, 1337, 1065, 1024}  /* ; 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1280x1024Data[] = {
 	{9, 1337, 970,  907},  /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1337, 917,  854},  /* ; 01 (320x350,640x350) */
 	{9, 1337, 970,  907},  /* ; 02 (360x400,720x400) */
@@ -1228,7 +711,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[] = {
 	{9, 1337, 1065, 1024}  /* ; 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024Data[] = {
 	{1368, 1008, 752,  711}, /* 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729,  688}, /* 01 (320x350,640x350) */
 	{1368, 1008, 752,  711}, /* 02 (360x400,720x400) */
@@ -1239,7 +722,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[] = {
 	{9,    1337, 1065, 1024} /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = {
+static struct XGI_LCDDesStruct xgifb_lcddldes_1400x1050[] = {
 	{18,   1464, 0,    1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18,   1464, 0,    1051}, /* 01 (320x350,640x350) */
 	{18,   1464, 0,    1051}, /* 02 (360x400,720x400) */
@@ -1251,7 +734,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = {
 	{18,   1464, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1400x1050[] = {
 	{9,    1455, 0,    1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9,    1455, 0,    1051}, /* 01 (320x350,640x350) */
 	{9,    1455, 0,    1051}, /* 02 (360x400,720x400) */
@@ -1263,7 +746,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = {
 	{9,    1455, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data[] = {
 	{1308, 1068, 781,  766},  /* 00 (320x200,320x400,640x200,640x400) */
 	{1308, 1068, 781,  766},  /* 01 (320x350,640x350) */
 	{1308, 1068, 781,  766},  /* 02 (360x400,720x400) */
@@ -1275,7 +758,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[] = {
 	{18,   1464, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data2[] = {
 	{0, 1448, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{0, 1448, 0, 1051}, /* 01 (320x350,640x350) */
 	{0, 1448, 0, 1051}, /* 02 (360x400,720x400) */
@@ -1283,7 +766,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[] = {
 	{0, 1448, 0, 1051}  /* 04 (640x480x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1682, 0, 1201}, /* 01 (320x350,640x350) */
 	{18, 1682, 0, 1201}, /* 02 (360x400,720x400) */
@@ -1296,7 +779,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0, 1201}  /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDLDes1600x1200Data[] = {
 	{18, 1682, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1682, 1083, 1034}, /* 01 (320x350,640x350) */
 	{18, 1682, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -1309,7 +792,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0,    1201} /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1600x1200Data[] = {
 	{9, 1673, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9, 1673, 0, 1201}, /* 01 (320x350,640x350) */
 	{9, 1673, 0, 1201}, /* 02 (360x400,720x400) */
@@ -1322,7 +805,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[] = {
 	{9, 1673, 0, 1201}  /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1600x1200Data[] = {
 	{9, 1673, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9, 1673, 1083, 1034}, /* 01 (320x350,640x350) */
 	{9, 1673, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -1352,7 +835,7 @@ static struct XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[] = {
 };
 
 /* ;;1024x768x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1024x768x75[] = {
 	{9, 1049, 0, 769}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1049, 0, 769}, /* ; 01 (320x350,640x350) */
 	{9, 1049, 0, 769}, /* ; 02 (360x400,720x400) */
@@ -1363,7 +846,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = {
 };
 
 /* ;;1024x768x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768x75Data[] = {
 	{1152, 856,  622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1152, 856,  597, 562}, /* ; 01 (320x350,640x350) */
 	{1192, 896,  622, 587}, /* ; 02 (360x400,720x400) */
@@ -1374,7 +857,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[] = {
 };
 
 /* ;;1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddldes_1280x1024x75[] = {
 	{18, 1314, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{18, 1314, 0, 1025}, /* ; 01 (320x350,640x350) */
 	{18, 1314, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -1386,7 +869,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = {
 };
 
 /* 1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = {
 	{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
 	{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
@@ -1398,7 +881,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[] = {
 };
 
 /* ;;1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1280x1024x75[] = {
 	{9, 1305, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1305, 0, 1025}, /* ; 01 (320x350,640x350) */
 	{9, 1305, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -1410,7 +893,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = {
 };
 
 /* 1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024x75Data[] = {
 	{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
 	{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index a7208e315815..30cdd1af81f1 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -66,8 +66,6 @@ struct xgi_hw_device_info {
 	unsigned long ulVideoMemorySize; /* size, in bytes, of the
 					    memory on the board */
 
-	unsigned char *pjIOAddress; /* base I/O address of VGA ports (0x3B0) */
-
 	unsigned char jChipType; /* Used to Identify Graphics Chip */
 				 /* defined in the data structure type  */
 				 /* "XGI_CHIP_TYPE" */
diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c
index 917461c66014..504b6c2db22e 100644
--- a/drivers/staging/zsmalloc/zsmalloc-main.c
+++ b/drivers/staging/zsmalloc/zsmalloc-main.c
@@ -45,12 +45,12 @@ static DEFINE_PER_CPU(struct mapping_area, zs_map_area);
 
 static int is_first_page(struct page *page)
 {
-	return test_bit(PG_private, &page->flags);
+	return PagePrivate(page);
 }
 
 static int is_last_page(struct page *page)
 {
-	return test_bit(PG_private_2, &page->flags);
+	return PagePrivate2(page);
 }
 
 static void get_zspage_mapping(struct page *page, unsigned int *class_idx,
@@ -377,7 +377,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 
 		INIT_LIST_HEAD(&page->lru);
 		if (i == 0) {	/* first page */
-			set_bit(PG_private, &page->flags);
+			SetPagePrivate(page);
 			set_page_private(page, 0);
 			first_page = page;
 			first_page->inuse = 0;
@@ -389,8 +389,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 		if (i >= 2)
 			list_add(&page->lru, &prev_page->lru);
 		if (i == class->zspage_order - 1)	/* last page */
-			set_bit(PG_private_2, &page->flags);
-
+			SetPagePrivate2(page);
 		prev_page = page;
 	}
 
diff --git a/drivers/staging/vme/Kconfig b/drivers/vme/Kconfig
index 6411ae51ed3f..c5c22465a805 100644
--- a/drivers/staging/vme/Kconfig
+++ b/drivers/vme/Kconfig
@@ -10,10 +10,10 @@ menuconfig VME_BUS
 
 if VME_BUS
 
-source "drivers/staging/vme/bridges/Kconfig"
+source "drivers/vme/bridges/Kconfig"
 
-source "drivers/staging/vme/devices/Kconfig"
+source "drivers/vme/boards/Kconfig"
 
-source "drivers/staging/vme/boards/Kconfig"
+source "drivers/staging/vme/devices/Kconfig"
 
 endif # VME
diff --git a/drivers/vme/Makefile b/drivers/vme/Makefile
new file mode 100644
index 000000000000..d7bfcb9fd5a1
--- /dev/null
+++ b/drivers/vme/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the VME bridge device drivers.
+#
+obj-$(CONFIG_VME_BUS)		+= vme.o
+
+obj-y				+= bridges/
+obj-y				+= boards/
diff --git a/drivers/staging/vme/boards/Kconfig b/drivers/vme/boards/Kconfig
index 761631353527..761631353527 100644
--- a/drivers/staging/vme/boards/Kconfig
+++ b/drivers/vme/boards/Kconfig
diff --git a/drivers/staging/vme/boards/Makefile b/drivers/vme/boards/Makefile
index 43658340885d..43658340885d 100644
--- a/drivers/staging/vme/boards/Makefile
+++ b/drivers/vme/boards/Makefile
diff --git a/drivers/staging/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c
index 8e05bb4e135a..8e05bb4e135a 100644
--- a/drivers/staging/vme/boards/vme_vmivme7805.c
+++ b/drivers/vme/boards/vme_vmivme7805.c
diff --git a/drivers/staging/vme/boards/vme_vmivme7805.h b/drivers/vme/boards/vme_vmivme7805.h
index 44c2c449808c..44c2c449808c 100644
--- a/drivers/staging/vme/boards/vme_vmivme7805.h
+++ b/drivers/vme/boards/vme_vmivme7805.h
diff --git a/drivers/staging/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig
index 9331064e0476..9331064e0476 100644
--- a/drivers/staging/vme/bridges/Kconfig
+++ b/drivers/vme/bridges/Kconfig
diff --git a/drivers/staging/vme/bridges/Makefile b/drivers/vme/bridges/Makefile
index 59638afcd502..59638afcd502 100644
--- a/drivers/staging/vme/bridges/Makefile
+++ b/drivers/vme/bridges/Makefile
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 515b8b8e32a8..a3c0f84e2fa1 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -29,8 +29,8 @@
 #include <linux/time.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "../vme_bridge.h"
 #include "vme_ca91cx42.h"
 
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.h b/drivers/vme/bridges/vme_ca91cx42.h
index 02a7c794db05..02a7c794db05 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.h
+++ b/drivers/vme/bridges/vme_ca91cx42.h
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index f50582169b24..081e9c4c5e71 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -29,8 +29,9 @@
 #include <linux/time.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/byteorder/generic.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "../vme_bridge.h"
 #include "vme_tsi148.h"
 
@@ -1415,51 +1416,55 @@ static unsigned int tsi148_master_rmw(struct vme_master_resource *image,
 	return result;
 }
 
-static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
+static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,
 	u32 aspace, u32 cycle, u32 dwidth)
 {
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
 	/* Setup 2eSST speeds */
 	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
 	case VME_2eSST160:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_160;
+		val |= TSI148_LCSR_DSAT_2eSSTM_160;
 		break;
 	case VME_2eSST267:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_267;
+		val |= TSI148_LCSR_DSAT_2eSSTM_267;
 		break;
 	case VME_2eSST320:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_320;
+		val |= TSI148_LCSR_DSAT_2eSSTM_320;
 		break;
 	}
 
 	/* Setup cycle types */
 	if (cycle & VME_SCT)
-		*attr |= TSI148_LCSR_DSAT_TM_SCT;
+		val |= TSI148_LCSR_DSAT_TM_SCT;
 
 	if (cycle & VME_BLT)
-		*attr |= TSI148_LCSR_DSAT_TM_BLT;
+		val |= TSI148_LCSR_DSAT_TM_BLT;
 
 	if (cycle & VME_MBLT)
-		*attr |= TSI148_LCSR_DSAT_TM_MBLT;
+		val |= TSI148_LCSR_DSAT_TM_MBLT;
 
 	if (cycle & VME_2eVME)
-		*attr |= TSI148_LCSR_DSAT_TM_2eVME;
+		val |= TSI148_LCSR_DSAT_TM_2eVME;
 
 	if (cycle & VME_2eSST)
-		*attr |= TSI148_LCSR_DSAT_TM_2eSST;
+		val |= TSI148_LCSR_DSAT_TM_2eSST;
 
 	if (cycle & VME_2eSSTB) {
 		dev_err(dev, "Currently not setting Broadcast Select "
 			"Registers\n");
-		*attr |= TSI148_LCSR_DSAT_TM_2eSSTB;
+		val |= TSI148_LCSR_DSAT_TM_2eSSTB;
 	}
 
 	/* Setup data width */
 	switch (dwidth) {
 	case VME_D16:
-		*attr |= TSI148_LCSR_DSAT_DBW_16;
+		val |= TSI148_LCSR_DSAT_DBW_16;
 		break;
 	case VME_D32:
-		*attr |= TSI148_LCSR_DSAT_DBW_32;
+		val |= TSI148_LCSR_DSAT_DBW_32;
 		break;
 	default:
 		dev_err(dev, "Invalid data width\n");
@@ -1469,31 +1474,31 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
 	/* Setup address space */
 	switch (aspace) {
 	case VME_A16:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A16;
+		val |= TSI148_LCSR_DSAT_AMODE_A16;
 		break;
 	case VME_A24:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A24;
+		val |= TSI148_LCSR_DSAT_AMODE_A24;
 		break;
 	case VME_A32:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A32;
+		val |= TSI148_LCSR_DSAT_AMODE_A32;
 		break;
 	case VME_A64:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A64;
+		val |= TSI148_LCSR_DSAT_AMODE_A64;
 		break;
 	case VME_CRCSR:
-		*attr |= TSI148_LCSR_DSAT_AMODE_CRCSR;
+		val |= TSI148_LCSR_DSAT_AMODE_CRCSR;
 		break;
 	case VME_USER1:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER1;
+		val |= TSI148_LCSR_DSAT_AMODE_USER1;
 		break;
 	case VME_USER2:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER2;
+		val |= TSI148_LCSR_DSAT_AMODE_USER2;
 		break;
 	case VME_USER3:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER3;
+		val |= TSI148_LCSR_DSAT_AMODE_USER3;
 		break;
 	case VME_USER4:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER4;
+		val |= TSI148_LCSR_DSAT_AMODE_USER4;
 		break;
 	default:
 		dev_err(dev, "Invalid address space\n");
@@ -1502,58 +1507,64 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
 	}
 
 	if (cycle & VME_SUPER)
-		*attr |= TSI148_LCSR_DSAT_SUP;
+		val |= TSI148_LCSR_DSAT_SUP;
 	if (cycle & VME_PROG)
-		*attr |= TSI148_LCSR_DSAT_PGM;
+		val |= TSI148_LCSR_DSAT_PGM;
+
+	*attr = cpu_to_be32(val);
 
 	return 0;
 }
 
-static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
+static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,
 	u32 aspace, u32 cycle, u32 dwidth)
 {
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
 	/* Setup 2eSST speeds */
 	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
 	case VME_2eSST160:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_160;
+		val |= TSI148_LCSR_DDAT_2eSSTM_160;
 		break;
 	case VME_2eSST267:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_267;
+		val |= TSI148_LCSR_DDAT_2eSSTM_267;
 		break;
 	case VME_2eSST320:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_320;
+		val |= TSI148_LCSR_DDAT_2eSSTM_320;
 		break;
 	}
 
 	/* Setup cycle types */
 	if (cycle & VME_SCT)
-		*attr |= TSI148_LCSR_DDAT_TM_SCT;
+		val |= TSI148_LCSR_DDAT_TM_SCT;
 
 	if (cycle & VME_BLT)
-		*attr |= TSI148_LCSR_DDAT_TM_BLT;
+		val |= TSI148_LCSR_DDAT_TM_BLT;
 
 	if (cycle & VME_MBLT)
-		*attr |= TSI148_LCSR_DDAT_TM_MBLT;
+		val |= TSI148_LCSR_DDAT_TM_MBLT;
 
 	if (cycle & VME_2eVME)
-		*attr |= TSI148_LCSR_DDAT_TM_2eVME;
+		val |= TSI148_LCSR_DDAT_TM_2eVME;
 
 	if (cycle & VME_2eSST)
-		*attr |= TSI148_LCSR_DDAT_TM_2eSST;
+		val |= TSI148_LCSR_DDAT_TM_2eSST;
 
 	if (cycle & VME_2eSSTB) {
 		dev_err(dev, "Currently not setting Broadcast Select "
 			"Registers\n");
-		*attr |= TSI148_LCSR_DDAT_TM_2eSSTB;
+		val |= TSI148_LCSR_DDAT_TM_2eSSTB;
 	}
 
 	/* Setup data width */
 	switch (dwidth) {
 	case VME_D16:
-		*attr |= TSI148_LCSR_DDAT_DBW_16;
+		val |= TSI148_LCSR_DDAT_DBW_16;
 		break;
 	case VME_D32:
-		*attr |= TSI148_LCSR_DDAT_DBW_32;
+		val |= TSI148_LCSR_DDAT_DBW_32;
 		break;
 	default:
 		dev_err(dev, "Invalid data width\n");
@@ -1563,31 +1574,31 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
 	/* Setup address space */
 	switch (aspace) {
 	case VME_A16:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A16;
+		val |= TSI148_LCSR_DDAT_AMODE_A16;
 		break;
 	case VME_A24:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A24;
+		val |= TSI148_LCSR_DDAT_AMODE_A24;
 		break;
 	case VME_A32:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A32;
+		val |= TSI148_LCSR_DDAT_AMODE_A32;
 		break;
 	case VME_A64:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A64;
+		val |= TSI148_LCSR_DDAT_AMODE_A64;
 		break;
 	case VME_CRCSR:
-		*attr |= TSI148_LCSR_DDAT_AMODE_CRCSR;
+		val |= TSI148_LCSR_DDAT_AMODE_CRCSR;
 		break;
 	case VME_USER1:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER1;
+		val |= TSI148_LCSR_DDAT_AMODE_USER1;
 		break;
 	case VME_USER2:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER2;
+		val |= TSI148_LCSR_DDAT_AMODE_USER2;
 		break;
 	case VME_USER3:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER3;
+		val |= TSI148_LCSR_DDAT_AMODE_USER3;
 		break;
 	case VME_USER4:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER4;
+		val |= TSI148_LCSR_DDAT_AMODE_USER4;
 		break;
 	default:
 		dev_err(dev, "Invalid address space\n");
@@ -1596,25 +1607,28 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
 	}
 
 	if (cycle & VME_SUPER)
-		*attr |= TSI148_LCSR_DDAT_SUP;
+		val |= TSI148_LCSR_DDAT_SUP;
 	if (cycle & VME_PROG)
-		*attr |= TSI148_LCSR_DDAT_PGM;
+		val |= TSI148_LCSR_DDAT_PGM;
+
+	*attr = cpu_to_be32(val);
 
 	return 0;
 }
 
 /*
  * Add a link list descriptor to the list
+ *
+ * Note: DMA engine expects the DMA descriptor to be big endian.
  */
 static int tsi148_dma_list_add(struct vme_dma_list *list,
 	struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count)
 {
 	struct tsi148_dma_entry *entry, *prev;
-	u32 address_high, address_low;
+	u32 address_high, address_low, val;
 	struct vme_dma_pattern *pattern_attr;
 	struct vme_dma_pci *pci_attr;
 	struct vme_dma_vme *vme_attr;
-	dma_addr_t desc_ptr;
 	int retval = 0;
 	struct vme_bridge *tsi148_bridge;
 
@@ -1648,34 +1662,36 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	case VME_DMA_PATTERN:
 		pattern_attr = src->private;
 
-		entry->descriptor.dsal = pattern_attr->pattern;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT;
+		entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern);
+
+		val = TSI148_LCSR_DSAT_TYP_PAT;
+
 		/* Default behaviour is 32 bit pattern */
 		if (pattern_attr->type & VME_DMA_PATTERN_BYTE)
-			entry->descriptor.dsat |= TSI148_LCSR_DSAT_PSZ;
+			val |= TSI148_LCSR_DSAT_PSZ;
 
 		/* It seems that the default behaviour is to increment */
 		if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0)
-			entry->descriptor.dsat |= TSI148_LCSR_DSAT_NIN;
-
+			val |= TSI148_LCSR_DSAT_NIN;
+		entry->descriptor.dsat = cpu_to_be32(val);
 		break;
 	case VME_DMA_PCI:
 		pci_attr = src->private;
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.dsau = address_high;
-		entry->descriptor.dsal = address_low;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI;
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI);
 		break;
 	case VME_DMA_VME:
 		vme_attr = src->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.dsau = address_high;
-		entry->descriptor.dsal = address_low;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_VME;
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME);
 
 		retval = tsi148_dma_set_vme_src_attributes(
 			tsi148_bridge->parent, &entry->descriptor.dsat,
@@ -1691,9 +1707,8 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	}
 
 	/* Assume last link - this will be over-written by adding another */
-	entry->descriptor.dnlau = 0;
-	entry->descriptor.dnlal = TSI148_LCSR_DNLAL_LLA;
-
+	entry->descriptor.dnlau = cpu_to_be32(0);
+	entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA);
 
 	/* Fill out destination part */
 	switch (dest->type) {
@@ -1702,18 +1717,18 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.ddau = address_high;
-		entry->descriptor.ddal = address_low;
-		entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI;
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI);
 		break;
 	case VME_DMA_VME:
 		vme_attr = dest->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.ddau = address_high;
-		entry->descriptor.ddal = address_low;
-		entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_VME;
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME);
 
 		retval = tsi148_dma_set_vme_dest_attributes(
 			tsi148_bridge->parent, &entry->descriptor.ddat,
@@ -1729,7 +1744,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	}
 
 	/* Fill out count */
-	entry->descriptor.dcnt = (u32)count;
+	entry->descriptor.dcnt = cpu_to_be32((u32)count);
 
 	/* Add to list */
 	list_add_tail(&entry->list, &list->entries);
@@ -1739,9 +1754,15 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 		prev = list_entry(entry->list.prev, struct tsi148_dma_entry,
 			list);
 		/* We need the bus address for the pointer */
-		desc_ptr = virt_to_bus(&entry->descriptor);
-		reg_split(desc_ptr, &prev->descriptor.dnlau,
-			&prev->descriptor.dnlal);
+		entry->dma_handle = dma_map_single(tsi148_bridge->parent,
+			&entry->descriptor,
+			sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+
+		reg_split((unsigned long long)entry->dma_handle, &address_high,
+			&address_low);
+		entry->descriptor.dnlau = cpu_to_be32(address_high);
+		entry->descriptor.dnlal = cpu_to_be32(address_low);
+
 	}
 
 	return 0;
@@ -1784,7 +1805,6 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list)
 	struct vme_dma_resource *ctrlr;
 	int channel, retval = 0;
 	struct tsi148_dma_entry *entry;
-	dma_addr_t bus_addr;
 	u32 bus_addr_high, bus_addr_low;
 	u32 val, dctlreg = 0;
 	struct vme_bridge *tsi148_bridge;
@@ -1817,23 +1837,29 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list)
 	entry = list_first_entry(&list->entries, struct tsi148_dma_entry,
 		list);
 
-	bus_addr = virt_to_bus(&entry->descriptor);
+	entry->dma_handle = dma_map_single(tsi148_bridge->parent,
+		&entry->descriptor,
+		sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
 
 	mutex_unlock(&ctrlr->mtx);
 
-	reg_split(bus_addr, &bus_addr_high, &bus_addr_low);
+	reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low);
 
 	iowrite32be(bus_addr_high, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU);
 	iowrite32be(bus_addr_low, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL);
 
+	dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
+		TSI148_LCSR_OFFSET_DCTL);
+
 	/* Start the operation */
 	iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
 
 	wait_event_interruptible(bridge->dma_queue[channel],
 		tsi148_dma_busy(ctrlr->parent, channel));
+
 	/*
 	 * Read status register, this register is valid until we kick off a
 	 * new transfer.
@@ -1864,10 +1890,15 @@ static int tsi148_dma_list_empty(struct vme_dma_list *list)
 	struct list_head *pos, *temp;
 	struct tsi148_dma_entry *entry;
 
+	struct vme_bridge *tsi148_bridge = list->parent->parent;
+
 	/* detach and free each entry */
 	list_for_each_safe(pos, temp, &list->entries) {
 		list_del(pos);
 		entry = list_entry(pos, struct tsi148_dma_entry, list);
+
+		dma_unmap_single(tsi148_bridge->parent, entry->dma_handle,
+			sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
 		kfree(entry);
 	}
 
diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h
index a3ac2fe98816..f5ed14382a8d 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.h
+++ b/drivers/vme/bridges/vme_tsi148.h
@@ -56,16 +56,16 @@ struct tsi148_driver {
  *       correctly laid out - It must also be aligned on 64-bit boundaries.
  */
 struct tsi148_dma_descriptor {
-	u32 dsau;      /* Source Address */
-	u32 dsal;
-	u32 ddau;      /* Destination Address */
-	u32 ddal;
-	u32 dsat;      /* Source attributes */
-	u32 ddat;      /* Destination attributes */
-	u32 dnlau;     /* Next link address */
-	u32 dnlal;
-	u32 dcnt;      /* Byte count */
-	u32 ddbs;      /* 2eSST Broadcast select */
+	__be32 dsau;      /* Source Address */
+	__be32 dsal;
+	__be32 ddau;      /* Destination Address */
+	__be32 ddal;
+	__be32 dsat;      /* Source attributes */
+	__be32 ddat;      /* Destination attributes */
+	__be32 dnlau;     /* Next link address */
+	__be32 dnlal;
+	__be32 dcnt;      /* Byte count */
+	__be32 ddbs;      /* 2eSST Broadcast select */
 };
 
 struct tsi148_dma_entry {
@@ -75,6 +75,7 @@ struct tsi148_dma_entry {
 	 */
 	struct tsi148_dma_descriptor descriptor;
 	struct list_head list;
+	dma_addr_t dma_handle;
 };
 
 /*
diff --git a/drivers/staging/vme/vme.c b/drivers/vme/vme.c
index 70722ae52321..95a9f71d793e 100644
--- a/drivers/staging/vme/vme.c
+++ b/drivers/vme/vme.c
@@ -30,8 +30,8 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "vme.h"
 #include "vme_bridge.h"
 
 /* Bitmask and list of registered buses both protected by common mutex */
@@ -98,14 +98,13 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size,
 	}
 
 	if (bridge->parent == NULL) {
-		printk(KERN_ERR "Dev entry NULL for"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return NULL;
 	}
 
 	if (bridge->alloc_consistent == NULL) {
-		printk(KERN_ERR "alloc_consistent not supported by"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
+		       bridge->name);
 		return NULL;
 	}
 
@@ -133,14 +132,13 @@ void vme_free_consistent(struct vme_resource *resource, size_t size,
 	}
 
 	if (bridge->parent == NULL) {
-		printk(KERN_ERR "Dev entry NULL for"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return;
 	}
 
 	if (bridge->free_consistent == NULL) {
-		printk(KERN_ERR "free_consistent not supported by"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "free_consistent not supported by bridge %s\n",
+		       bridge->name);
 		return;
 	}
 
@@ -747,15 +745,13 @@ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type)
 
 	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL);
 	if (pattern_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pattern "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for pattern attributes\n");
 		goto err_pat;
 	}
 
@@ -786,15 +782,13 @@ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address)
 
 	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL);
 	if (pci_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pci "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for pci attributes\n");
 		goto err_pci;
 	}
 
@@ -826,15 +820,13 @@ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address,
 	attributes = kmalloc(
 		sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL);
 	if (vme_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for vme "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for vme attributes\n");
 		goto err_vme;
 	}
 
@@ -982,8 +974,8 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid)
 	if (call != NULL)
 		call(level, statid, priv_data);
 	else
-		printk(KERN_WARNING "Spurilous VME interrupt, level:%x, "
-			"vector:%x\n", level, statid);
+		printk(KERN_WARNING "Spurilous VME interrupt, level:%x, vector:%x\n",
+		       level, statid);
 }
 EXPORT_SYMBOL(vme_irq_handler);
 
@@ -1112,8 +1104,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 			struct vme_lm_resource, list);
 
 		if (lm == NULL) {
-			printk(KERN_ERR "Registered NULL Location Monitor "
-				"resource\n");
+			printk(KERN_ERR "Registered NULL Location Monitor resource\n");
 			continue;
 		}
 
diff --git a/drivers/staging/vme/vme_api.txt b/drivers/vme/vme_api.txt
index 856efa35f6e3..856efa35f6e3 100644
--- a/drivers/staging/vme/vme_api.txt
+++ b/drivers/vme/vme_api.txt
diff --git a/drivers/staging/vme/vme_bridge.h b/drivers/vme/vme_bridge.h
index 934949abd745..934949abd745 100644
--- a/drivers/staging/vme/vme_bridge.h
+++ b/drivers/vme/vme_bridge.h
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
index 975009e1cbe6..96c5c249b086 100644
--- a/include/linux/alarmtimer.h
+++ b/include/linux/alarmtimer.h
@@ -76,4 +76,7 @@ static inline int alarmtimer_callback_running(struct alarm *timer)
 }
 
 
+/* Provide way to access the rtc device being used by alarmtimers */
+struct rtc_device *alarmtimer_get_rtcdev(void);
+
 #endif
diff --git a/drivers/staging/iio/buffer.h b/include/linux/iio/buffer.h
index df2046dcb623..fb0fe46fd659 100644
--- a/drivers/staging/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -10,7 +10,7 @@
 #ifndef _IIO_BUFFER_GENERIC_H_
 #define _IIO_BUFFER_GENERIC_H_
 #include <linux/sysfs.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 
 #ifdef CONFIG_IIO_BUFFER
 
@@ -56,7 +56,6 @@ struct iio_buffer_access_funcs {
  * @scan_el_attrs:	[DRIVER] control of scan elements if that scan mode
  *			control method is used
  * @scan_mask:		[INTERN] bitmask used in masking scan mode elements
- * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
  * @scan_timestamp:	[INTERN] does the scan mode include a timestamp
  * @access:		[DRIVER] buffer access functions associated with the
  *			implementation.
@@ -74,7 +73,6 @@ struct iio_buffer {
 	struct attribute_group			*scan_el_attrs;
 	long					*scan_mask;
 	bool					scan_timestamp;
-	unsigned				scan_index_timestamp;
 	const struct iio_buffer_access_funcs	*access;
 	struct list_head			scan_el_dev_attr_list;
 	struct attribute_group			scan_el_group;
diff --git a/drivers/staging/iio/consumer.h b/include/linux/iio/consumer.h
index 36a060cd3a21..1a15e560a5a1 100644
--- a/drivers/staging/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -9,7 +9,7 @@
  */
 #ifndef _IIO_INKERN_CONSUMER_H_
 #define _IIO_INKERN_CONSUMER_H
-#include "types.h"
+#include <linux/iio/types.h>
 
 struct iio_dev;
 struct iio_chan_spec;
diff --git a/drivers/staging/iio/driver.h b/include/linux/iio/driver.h
index a4f8b2e05af5..a4f8b2e05af5 100644
--- a/drivers/staging/iio/driver.h
+++ b/include/linux/iio/driver.h
diff --git a/drivers/staging/iio/events.h b/include/linux/iio/events.h
index c25f0e3c92e9..b5acbf93c5da 100644
--- a/drivers/staging/iio/events.h
+++ b/include/linux/iio/events.h
@@ -11,7 +11,7 @@
 
 #include <linux/ioctl.h>
 #include <linux/types.h>
-#include "types.h"
+#include <linux/iio/types.h>
 
 /**
  * struct iio_event_data - The actual event being pushed to userspace
diff --git a/drivers/staging/iio/iio.h b/include/linux/iio/iio.h
index b9cd454f69e2..6fdbdb858e35 100644
--- a/drivers/staging/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -12,22 +12,17 @@
 
 #include <linux/device.h>
 #include <linux/cdev.h>
-#include "types.h"
+#include <linux/iio/types.h>
 /* IIO TODO LIST */
 /*
  * Provide means of adjusting timer accuracy.
  * Currently assumes nano seconds.
  */
 
-enum iio_data_type {
-	IIO_RAW,
-	IIO_PROCESSED,
-};
-
-/* Could add the raw attributes as well - allowing buffer only devices */
 enum iio_chan_info_enum {
-	/* 0 is reserved for raw attributes */
-	IIO_CHAN_INFO_SCALE = 1,
+	IIO_CHAN_INFO_RAW = 0,
+	IIO_CHAN_INFO_PROCESSED,
+	IIO_CHAN_INFO_SCALE,
 	IIO_CHAN_INFO_OFFSET,
 	IIO_CHAN_INFO_CALIBSCALE,
 	IIO_CHAN_INFO_CALIBBIAS,
@@ -36,11 +31,18 @@ enum iio_chan_info_enum {
 	IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
 	IIO_CHAN_INFO_AVERAGE_RAW,
 	IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+	IIO_CHAN_INFO_SAMP_FREQ,
+	IIO_CHAN_INFO_FREQUENCY,
+	IIO_CHAN_INFO_PHASE,
 };
 
 #define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
 #define IIO_CHAN_INFO_SEPARATE_BIT(type) BIT(type*2 + 1)
 
+#define IIO_CHAN_INFO_RAW_SEPARATE_BIT			\
+	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_RAW)
+#define IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT			\
+	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PROCESSED)
 #define IIO_CHAN_INFO_SCALE_SEPARATE_BIT		\
 	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SCALE)
 #define IIO_CHAN_INFO_SCALE_SHARED_BIT			\
@@ -81,6 +83,18 @@ enum iio_chan_info_enum {
 #define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
 	IIO_CHAN_INFO_SEPARATE_BIT(			       \
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
+#define IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT		\
+	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SAMP_FREQ)
+#define IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT			\
+	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SAMP_FREQ)
+#define IIO_CHAN_INFO_FREQUENCY_SEPARATE_BIT			\
+	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_FREQUENCY)
+#define IIO_CHAN_INFO_FREQUENCY_SHARED_BIT			\
+	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_FREQUENCY)
+#define IIO_CHAN_INFO_PHASE_SEPARATE_BIT			\
+	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PHASE)
+#define IIO_CHAN_INFO_PHASE_SHARED_BIT			\
+	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PHASE)
 
 enum iio_endian {
 	IIO_CPU,
@@ -97,14 +111,17 @@ struct iio_dev;
  * @shared:	Whether this attribute is shared between all channels.
  * @read:	Read callback for this info attribute, may be NULL.
  * @write:	Write callback for this info attribute, may be NULL.
+ * @private:	Data private to the driver.
  */
 struct iio_chan_spec_ext_info {
 	const char *name;
 	bool shared;
-	ssize_t (*read)(struct iio_dev *, struct iio_chan_spec const *,
-			char *buf);
-	ssize_t (*write)(struct iio_dev *, struct iio_chan_spec const *,
-			const char *buf, size_t len);
+	ssize_t (*read)(struct iio_dev *, uintptr_t private,
+			struct iio_chan_spec const *, char *buf);
+	ssize_t (*write)(struct iio_dev *, uintptr_t private,
+			 struct iio_chan_spec const *, const char *buf,
+			 size_t len);
+	uintptr_t private;
 };
 
 /**
@@ -136,8 +153,6 @@ struct iio_chan_spec_ext_info {
  *			correspond to the first name that the channel is referred
  *			to by in the datasheet (e.g. IND), or the nearest
  *			possible compound name (e.g. IND-INC).
- * @processed_val:	Flag to specify the data access attribute should be
- *			*_input rather than *_raw.
  * @modified:		Does a modifier apply to this channel. What these are
  *			depends on the channel type.  Modifier is set in
  *			channel2. Examples are IIO_MOD_X for axial sensors about
@@ -164,9 +179,8 @@ struct iio_chan_spec {
 	long			info_mask;
 	long			event_mask;
 	const struct iio_chan_spec_ext_info *ext_info;
-	char			*extend_name;
+	const char		*extend_name;
 	const char		*datasheet_name;
-	unsigned		processed_val:1;
 	unsigned		modified:1;
 	unsigned		indexed:1;
 	unsigned		output:1;
@@ -176,23 +190,6 @@ struct iio_chan_spec {
 #define IIO_ST(si, rb, sb, sh)						\
 	{ .sign = si, .realbits = rb, .storagebits = sb, .shift = sh }
 
-/* Macro assumes input channels */
-#define IIO_CHAN(_type, _mod, _indexed, _proc, _name, _chan, _chan2, \
-		 _inf_mask, _address, _si, _stype, _event_mask)		\
-	{ .type = _type,						\
-	  .output = 0,							\
-	  .modified = _mod,						\
-	  .indexed = _indexed,						\
-	  .processed_val = _proc,					\
-	  .extend_name = _name,						\
-	  .channel = _chan,						\
-	  .channel2 = _chan2,						\
-	  .info_mask = _inf_mask,					\
-	  .address = _address,						\
-	  .scan_index = _si,						\
-	  .scan_type = _stype,						\
-	  .event_mask = _event_mask }
-
 #define IIO_CHAN_SOFT_TIMESTAMP(_si)					\
 	{ .type = IIO_TIMESTAMP, .channel = -1,				\
 			.scan_index = _si, .scan_type = IIO_ST('s', 64, 64, 0) }
@@ -315,12 +312,15 @@ struct iio_buffer_setup_ops {
  *			and owner
  * @event_interface:	[INTERN] event chrdevs associated with interrupt lines
  * @buffer:		[DRIVER] any buffer present
+ * @scan_bytes:		[INTERN] num bytes captured to be fed to buffer demux
  * @mlock:		[INTERN] lock used to prevent simultaneous device state
  *			changes
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @masklength:		[INTERN] the length of the mask established from
  *			channels
  * @active_scan_mask:	[INTERN] union of all scan masks requested by buffers
+ * @scan_timestamp:	[INTERN] set if any buffers have requested timestamp
+ * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
  * @trig:		[INTERN] current device trigger (buffer modes)
  * @pollfunc:		[DRIVER] function run on trigger being received
  * @channels:		[DRIVER] channel specification structure table
@@ -331,6 +331,8 @@ struct iio_buffer_setup_ops {
  * @name:		[DRIVER] name of the device.
  * @info:		[DRIVER] callbacks and constant info from driver
  * @info_exist_lock:	[INTERN] lock to prevent use during removal
+ * @setup_ops:		[DRIVER] callbacks to call before and after buffer
+ *			enable/disable
  * @chrdev:		[INTERN] associated character device
  * @groups:		[INTERN] attribute groups
  * @groupcounter:	[INTERN] index of next attribute group
@@ -348,11 +350,14 @@ struct iio_dev {
 	struct iio_event_interface	*event_interface;
 
 	struct iio_buffer		*buffer;
+	int				scan_bytes;
 	struct mutex			mlock;
 
 	const unsigned long		*available_scan_masks;
 	unsigned			masklength;
 	const unsigned long		*active_scan_mask;
+	bool				scan_timestamp;
+	unsigned			scan_index_timestamp;
 	struct iio_trigger		*trig;
 	struct iio_poll_func		*pollfunc;
 
@@ -408,10 +413,10 @@ int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
 extern struct bus_type iio_bus_type;
 
 /**
- * iio_put_device() - reference counted deallocation of struct device
+ * iio_device_put() - reference counted deallocation of struct device
  * @dev: the iio_device containing the device
  **/
-static inline void iio_put_device(struct iio_dev *indio_dev)
+static inline void iio_device_put(struct iio_dev *indio_dev)
 {
 	if (indio_dev)
 		put_device(&indio_dev->dev);
@@ -420,10 +425,10 @@ static inline void iio_put_device(struct iio_dev *indio_dev)
 /* Can we make this smaller? */
 #define IIO_ALIGN L1_CACHE_BYTES
 /**
- * iio_allocate_device() - allocate an iio_dev from a driver
+ * iio_device_alloc() - allocate an iio_dev from a driver
  * @sizeof_priv: Space to allocate for private structure.
  **/
-struct iio_dev *iio_allocate_device(int sizeof_priv);
+struct iio_dev *iio_device_alloc(int sizeof_priv);
 
 static inline void *iio_priv(const struct iio_dev *indio_dev)
 {
@@ -437,10 +442,10 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv)
 }
 
 /**
- * iio_free_device() - free an iio_dev from a driver
+ * iio_device_free() - free an iio_dev from a driver
  * @dev: the iio_dev associated with the device
  **/
-void iio_free_device(struct iio_dev *indio_dev);
+void iio_device_free(struct iio_dev *indio_dev);
 
 /**
  * iio_buffer_enabled() - helper function to test if the buffer is enabled
diff --git a/drivers/staging/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
index 9f7da016af04..014d5a13b32b 100644
--- a/drivers/staging/iio/kfifo_buf.h
+++ b/include/linux/iio/kfifo_buf.h
@@ -1,7 +1,7 @@
 
 #include <linux/kfifo.h>
-#include "iio.h"
-#include "buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
 
 struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev);
 void iio_kfifo_free(struct iio_buffer *r);
diff --git a/drivers/staging/iio/machine.h b/include/linux/iio/machine.h
index 0b1f19bfdc44..0b1f19bfdc44 100644
--- a/drivers/staging/iio/machine.h
+++ b/include/linux/iio/machine.h
diff --git a/drivers/staging/iio/sysfs.h b/include/linux/iio/sysfs.h
index bfedb73b850e..bfedb73b850e 100644
--- a/drivers/staging/iio/sysfs.h
+++ b/include/linux/iio/sysfs.h
diff --git a/drivers/staging/iio/trigger.h b/include/linux/iio/trigger.h
index 1cfca231db8f..a9819940a84c 100644
--- a/drivers/staging/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -78,13 +78,13 @@ static inline struct iio_trigger *to_iio_trigger(struct device *d)
 	return container_of(d, struct iio_trigger, dev);
 };
 
-static inline void iio_put_trigger(struct iio_trigger *trig)
+static inline void iio_trigger_put(struct iio_trigger *trig)
 {
 	module_put(trig->ops->owner);
 	put_device(&trig->dev);
 };
 
-static inline void iio_get_trigger(struct iio_trigger *trig)
+static inline void iio_trigger_get(struct iio_trigger *trig)
 {
 	get_device(&trig->dev);
 	__module_get(trig->ops->owner);
@@ -113,7 +113,7 @@ void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time);
 
 irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private);
 
-__printf(1, 2) struct iio_trigger *iio_allocate_trigger(const char *fmt, ...);
-void iio_free_trigger(struct iio_trigger *trig);
+__printf(1, 2) struct iio_trigger *iio_trigger_alloc(const char *fmt, ...);
+void iio_trigger_free(struct iio_trigger *trig);
 
 #endif /* _IIO_TRIGGER_H_ */
diff --git a/drivers/staging/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h
index 60d64b356945..60d64b356945 100644
--- a/drivers/staging/iio/trigger_consumer.h
+++ b/include/linux/iio/trigger_consumer.h
diff --git a/drivers/staging/iio/types.h b/include/linux/iio/types.h
index 0c3213666901..a471fd5a4d95 100644
--- a/drivers/staging/iio/types.h
+++ b/include/linux/iio/types.h
@@ -27,6 +27,7 @@ enum iio_chan_type {
 	IIO_ANGL,
 	IIO_TIMESTAMP,
 	IIO_CAPACITANCE,
+	IIO_ALTVOLTAGE,
 };
 
 enum iio_modifier {
diff --git a/drivers/staging/vme/vme.h b/include/linux/vme.h
index c9d65bf14cec..c9d65bf14cec 100644
--- a/drivers/staging/vme/vme.h
+++ b/include/linux/vme.h
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 8a538c55fc7b..aa27d391bfc8 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(rtcdev_lock);
  * If one has not already been chosen, it checks to see if a
  * functional rtc device is available.
  */
-static struct rtc_device *alarmtimer_get_rtcdev(void)
+struct rtc_device *alarmtimer_get_rtcdev(void)
 {
 	unsigned long flags;
 	struct rtc_device *ret;
@@ -115,7 +115,7 @@ static void alarmtimer_rtc_interface_remove(void)
 	class_interface_unregister(&alarmtimer_rtc_interface);
 }
 #else
-static inline struct rtc_device *alarmtimer_get_rtcdev(void)
+struct rtc_device *alarmtimer_get_rtcdev(void)
 {
 	return NULL;
 }