Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem updates from Bryan Wu:
 - move LED trigger drivers into a new directory
 - lp55xx common driver updates
 - other led drivers updates and bug fixing

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS
  leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions
  leds: lp55xx: configure the clock detection
  leds: lp55xx: use common clock framework when external clock is used
  leds: leds-ns2: fix oops at module removal
  leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
  leds: lp55xx: fix the sysfs read operation
  leds: lm355x, lm3642: support camera LED triggers for flash and torch
  leds: add camera LED triggers
  leds: trigger: use inline functions instead of macros
  leds: tca6507: Use of_match_ptr() macro
  leds: wm8350: Complain if we fail to reenable DCDC
  leds: renesas: set gpio_request_one() flags param correctly
  leds: leds-ns2: set devm_gpio_request_one() flags param correctly
  leds: leds-lt3593: set devm_gpio_request_one() flags param correctly
  leds: leds-bd2802: remove erroneous __exit annotation
  leds: atmel-pwm: remove erroneous __exit annotation
  leds: move LED trigger drivers into new subdirectory
  leds: add new LP5562 LED driver

36 files changed, 1149 insertions, 220 deletions

diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 5246090ef15c..1ecd1596633e 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -6,6 +6,8 @@ leds-lp5521.txt
 	- notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
 	- notes on how to use the leds-lp5523 driver.
+leds-lp5562.txt
+	- notes on how to use the leds-lp5562 driver.
 leds-lp55xx.txt
 	- description about lp55xx common driver.
 leds-lm3556.txt
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
index 270f57196339..79e4c2e6e5e8 100644
--- a/Documentation/leds/leds-lp5521.txt
+++ b/Documentation/leds/leds-lp5521.txt
@@ -81,22 +81,3 @@ static struct lp55xx_platform_data lp5521_platform_data = {
 
 If the current is set to 0 in the platform data, that channel is
 disabled and it is not visible in the sysfs.
-
-The 'update_config' : CONFIG register (ADDR 08h)
-This value is platform-specific data.
-If update_config is not defined, the CONFIG register is set with
-'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.
-(Enable auto-powersave, set charge pump to auto, red to battery)
-
-example of update_config :
-
-#define LP5521_CONFIGS	(LP5521_PWM_HF | LP5521_PWRSAVE_EN | \
-			LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
-			LP5521_CLK_INT)
-
-static struct lp55xx_platform_data lp5521_pdata = {
-	.led_config = lp5521_led_config,
-	.num_channels = ARRAY_SIZE(lp5521_led_config),
-	.clock_mode = LP55XX_CLOCK_INT,
-	.update_config = LP5521_CONFIGS,
-};
diff --git a/Documentation/leds/leds-lp5562.txt b/Documentation/leds/leds-lp5562.txt
new file mode 100644
index 000000000000..5a823ff6b393
--- /dev/null
+++ b/Documentation/leds/leds-lp5562.txt
@@ -0,0 +1,120 @@
+Kernel driver for LP5562
+========================
+
+* TI LP5562 LED Driver
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+
+  LP5562 can drive up to 4 channels. R/G/B and White.
+  LEDs can be controlled directly via the led class control interface.
+
+  All four channels can be also controlled using the engine micro programs.
+  LP5562 has the internal program memory for running various LED patterns.
+  For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+Device attribute: engine_mux
+
+  3 Engines are allocated in LP5562, but the number of channel is 4.
+  Therefore each channel should be mapped to the engine number.
+  Value : RGB or W
+
+  This attribute is used for programming LED data with the firmware interface.
+  Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
+  so additional sysfs is required.
+
+  LED Map
+  Red   ... Engine 1 (fixed)
+  Green ... Engine 2 (fixed)
+  Blue  ... Engine 3 (fixed)
+  White ... Engine 1 or 2 or 3 (selective)
+
+How to load the program data using engine_mux
+
+  Before loading the LP5562 program data, engine_mux should be written between
+  the engine selection and loading the firmware.
+  Engine mux has two different mode, RGB and W.
+  RGB is used for loading RGB program data, W is used for W program data.
+
+  For example, run blinking green channel pattern,
+  echo 2 > /sys/bus/i2c/devices/xxxx/select_engine     # 2 is for green channel
+  echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux    # engine mux for RGB
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+  To run a blinking white pattern,
+  echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
+  echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+How to load the predefined patterns
+
+  Please refer to 'leds-lp55xx.txt"
+
+Setting Current of Each Channel
+
+  Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
+  The 'led_current' and 'max_current' are used.
+
+(Example of Platform data)
+
+To configure the platform specific data, lp55xx_platform_data structure is used.
+
+static struct lp55xx_led_config lp5562_led_config[] = {
+	{
+		.name 		= "R",
+		.chan_nr	= 0,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "G",
+		.chan_nr	= 1,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "B",
+		.chan_nr	= 2,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "W",
+		.chan_nr	= 3,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+};
+
+static int lp5562_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5562_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5562_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp55xx_platform_data lp5562_platform_data = {
+        .led_config     = lp5562_led_config,
+        .num_channels   = ARRAY_SIZE(lp5562_led_config),
+        .setup_resources   = lp5562_setup,
+        .release_resources = lp5562_release,
+        .enable            = lp5562_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
index ced41868d2d1..eec8fa2ffe4e 100644
--- a/Documentation/leds/leds-lp55xx.txt
+++ b/Documentation/leds/leds-lp55xx.txt
@@ -5,7 +5,7 @@ Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
 
 Description
 -----------
-LP5521, LP5523/55231 have common features as below.
+LP5521, LP5523/55231 and LP5562 have common features as below.
 
   Register access via the I2C
   Device initialization/deinitialization
@@ -116,3 +116,47 @@ To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
 run_engine  : Control the selected engine
 firmware_cb : The callback function after loading the firmware is done.
               Chip specific commands for loading and updating program memory.
+
+( Predefined pattern data )
+
+Without the firmware interface, LP55xx driver provides another method for
+loading a LED pattern. That is 'predefined' pattern.
+A predefined pattern is defined in the platform data and load it(or them)
+via the sysfs if needed.
+To use the predefined pattern concept, 'patterns' and 'num_patterns' should be
+configured.
+
+  Example of predefined pattern data:
+
+  /* mode_1: blinking data */
+  static const u8 mode_1[] = {
+		0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00,
+		};
+
+  /* mode_2: always on */
+  static const u8 mode_2[] = { 0x40, 0xFF, };
+
+  struct lp55xx_predef_pattern board_led_patterns[] = {
+	{
+		.r = mode_1,
+		.size_r = ARRAY_SIZE(mode_1),
+	},
+	{
+		.b = mode_2,
+		.size_b = ARRAY_SIZE(mode_2),
+	},
+  }
+
+  struct lp55xx_platform_data lp5562_pdata = {
+  ...
+	.patterns      = board_led_patterns,
+	.num_patterns  = ARRAY_SIZE(board_led_patterns),
+  };
+
+Then, mode_1 and mode_2 can be run via through the sysfs.
+
+  echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern    # red blinking LED pattern
+  echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern    # blue LED always on
+
+To stop running pattern,
+  echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec50824c02ec..d44806d41b44 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -194,8 +194,8 @@ config LEDS_LP3944
 	  module will be called leds-lp3944.
 
 config LEDS_LP55XX_COMMON
-	tristate "Common Driver for TI/National LP5521 and LP5523/55231"
-	depends on LEDS_LP5521 || LEDS_LP5523
+	tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
+	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
 	select FW_LOADER
 	help
 	  This option supports common operations for LP5521 and LP5523/55231
@@ -222,6 +222,16 @@ config LEDS_LP5523
 	  Driver provides direct control via LED class and interface for
 	  programming the engines.
 
+config LEDS_LP5562
+	tristate "LED Support for TI LP5562 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	select LEDS_LP55XX_COMMON
+	help
+	  If you say yes here you get support for TI LP5562 LED driver.
+	  It is 4 channels chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
 config LEDS_LP8788
 	tristate "LED support for the TI LP8788 PMIC"
 	depends on LEDS_CLASS
@@ -469,106 +479,7 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
-config LEDS_TRIGGERS
-	bool "LED Trigger support"
-	depends on LEDS_CLASS
-	help
-	  This option enables trigger support for the leds class.
-	  These triggers allow kernel events to drive the LEDs and can
-	  be configured via sysfs. If unsure, say Y.
-
 comment "LED Triggers"
-
-config LEDS_TRIGGER_TIMER
-	tristate "LED Timer Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a programmable timer
-	  via sysfs. Some LED hardware can be programmed to start
-	  blinking the LED without any further software interaction.
-	  For more details read Documentation/leds/leds-class.txt.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_ONESHOT
-	tristate "LED One-shot Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to blink in one-shot pulses with parameters
-	  controlled via sysfs.  It's useful to notify the user on
-	  sporadic events, when there are no clear begin and end trap points,
-	  or on dense events, where this blinks the LED at constant rate if
-	  rearmed continuously.
-
-	  It also shows how to use the led_blink_set_oneshot() function.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_IDE_DISK
-	bool "LED IDE Disk Trigger"
-	depends on IDE_GD_ATA
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by IDE disk activity.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_HEARTBEAT
-	tristate "LED Heartbeat Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a CPU load average.
-	  The flash frequency is a hyperbolic function of the 1-minute
-	  load average.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_BACKLIGHT
-	tristate "LED backlight Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled as a backlight device: they
-	  turn off and on when the display is blanked and unblanked.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_CPU
-	bool "LED CPU Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by active CPUs. This shows
-	  the active CPUs across an array of LEDs so you can see which
-	  CPUs are active on the system at any given moment.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_GPIO
-	tristate "LED GPIO Trigger"
-	depends on LEDS_TRIGGERS
-	depends on GPIOLIB
-	help
-	  This allows LEDs to be controlled by gpio events. It's good
-	  when using gpios as switches and triggering the needed LEDs
-	  from there. One use case is n810's keypad LEDs that could
-	  be triggered by this trigger when user slides up to show
-	  keypad.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_DEFAULT_ON
-	tristate "LED Default ON Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be initialised in the ON state.
-	  If unsure, say Y.
-
-comment "iptables trigger is under Netfilter config (LED target)"
-	depends on LEDS_TRIGGERS
-
-config LEDS_TRIGGER_TRANSIENT
-	tristate "LED Transient Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows one time activation of a transient state on
-	  GPIO/PWM based hardware.
-	  If unsure, say Y.
+source "drivers/leds/trigger/Kconfig"
 
 endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 215e7e3b6173..ac2897732b02 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
+obj-$(CONFIG_LEDS_LP5562)		+= leds-lp5562.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
@@ -57,12 +58,4 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 
 # LED Triggers
-obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
-obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
-obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
-obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
-obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
-obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
-obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index b474745e001b..cf9efe421c2b 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -134,6 +134,7 @@ static int asic3_led_remove(struct platform_device *pdev)
 	return mfd_cell_disable(pdev);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int asic3_led_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -159,11 +160,9 @@ static int asic3_led_resume(struct device *dev)
 
 	return ret;
 }
+#endif
 
-static const struct dev_pm_ops asic3_led_pm_ops = {
-	.suspend	= asic3_led_suspend,
-	.resume		= asic3_led_resume,
-};
+static SIMPLE_DEV_PM_OPS(asic3_led_pm_ops, asic3_led_suspend, asic3_led_resume);
 
 static struct platform_driver asic3_led_driver = {
 	.probe		= asic3_led_probe,
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 386773532d95..8a39c5b20f76 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -113,7 +113,7 @@ err:
 	return status;
 }
 
-static int __exit pwmled_remove(struct platform_device *pdev)
+static int pwmled_remove(struct platform_device *pdev)
 {
 	const struct gpio_led_platform_data	*pdata;
 	struct pwmled				*leds;
@@ -140,7 +140,7 @@ static struct platform_driver pwmled_driver = {
 	},
 	/* REVISIT add suspend() and resume() methods */
 	.probe =	pwmled_probe,
-	.remove =	__exit_p(pwmled_remove),
+	.remove =	pwmled_remove,
 };
 
 module_platform_driver(pwmled_driver);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 851517030cc1..2db04231a792 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -732,7 +732,7 @@ failed_unregister_dev_file:
 	return ret;
 }
 
-static int __exit bd2802_remove(struct i2c_client *client)
+static int bd2802_remove(struct i2c_client *client)
 {
 	struct bd2802_led *led = i2c_get_clientdata(client);
 	int i;
@@ -747,8 +747,7 @@ static int __exit bd2802_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
+#ifdef CONFIG_PM_SLEEP
 static void bd2802_restore_state(struct bd2802_led *led)
 {
 	int i;
@@ -785,12 +784,9 @@ static int bd2802_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
-#define BD2802_PM (&bd2802_pm)
-#else		/* CONFIG_PM */
-#define BD2802_PM NULL
-#endif
 
 static const struct i2c_device_id bd2802_id[] = {
 	{ "BD2802", 0 },
@@ -801,10 +797,10 @@ MODULE_DEVICE_TABLE(i2c, bd2802_id);
 static struct i2c_driver bd2802_i2c_driver = {
 	.driver	= {
 		.name	= "BD2802",
-		.pm	= BD2802_PM,
+		.pm	= &bd2802_pm,
 	},
 	.probe		= bd2802_probe,
-	.remove		= __exit_p(bd2802_remove),
+	.remove		= bd2802_remove,
 	.id_table	= bd2802_id,
 };
 
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 4117235ba618..d81a8e7afd6c 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -477,6 +477,7 @@ static int lm355x_probe(struct i2c_client *client,
 	chip->cdev_flash.name = "flash";
 	chip->cdev_flash.max_brightness = 16;
 	chip->cdev_flash.brightness_set = lm355x_strobe_brightness_set;
+	chip->cdev_flash.default_trigger = "flash";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_flash);
 	if (err < 0)
@@ -486,6 +487,7 @@ static int lm355x_probe(struct i2c_client *client,
 	chip->cdev_torch.name = "torch";
 	chip->cdev_torch.max_brightness = 8;
 	chip->cdev_torch.brightness_set = lm355x_torch_brightness_set;
+	chip->cdev_torch.default_trigger = "torch";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_torch);
 	if (err < 0)
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 9f428d9dfe91..f361bbef2dec 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -363,6 +363,7 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_flash.name = "flash";
 	chip->cdev_flash.max_brightness = 16;
 	chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set;
+	chip->cdev_flash.default_trigger = "flash";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_flash);
 	if (err < 0) {
@@ -380,6 +381,7 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_torch.name = "torch";
 	chip->cdev_torch.max_brightness = 8;
 	chip->cdev_torch.brightness_set = lm3642_torch_brightness_set;
+	chip->cdev_torch.default_trigger = "torch";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_torch);
 	if (err < 0) {
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 1001347ba70b..19752c928aa2 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -68,6 +68,18 @@
 #define LP5521_ENABLE_RUN_PROGRAM	\
 	(LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
 
+/* CONFIG register */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		0x04	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_INT			0x01	/* Internal clock */
+#define LP5521_DEFAULT_CFG		\
+	(LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO)
+
 /* Status */
 #define LP5521_EXT_CLK_USED		0x08
 
@@ -296,8 +308,11 @@ static int lp5521_post_init_device(struct lp55xx_chip *chip)
 	/* Set all PWMs to direct control mode */
 	ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
 
-	val = chip->pdata->update_config ?
-		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+	/* Update configuration for the clock setting */
+	val = LP5521_DEFAULT_CFG;
+	if (!lp55xx_is_extclk_used(chip))
+		val |= LP5521_CLK_INT;
+
 	ret = lp55xx_write(chip, LP5521_REG_CONFIG, val);
 	if (ret)
 		return ret;
@@ -360,7 +375,8 @@ static ssize_t lp5521_selftest(struct device *dev,
 	mutex_lock(&chip->lock);
 	ret = lp5521_run_selftest(chip, buf);
 	mutex_unlock(&chip->lock);
-	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", ret ? "FAIL" : "OK");
 }
 
 /* device attributes */
diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
new file mode 100644
index 000000000000..513f2390ca2d
--- /dev/null
+++ b/drivers/leds/leds-lp5562.c
@@ -0,0 +1,599 @@
+/*
+ * LP5562 LED driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/slab.h>
+
+#include "leds-lp55xx-common.h"
+
+#define LP5562_PROGRAM_LENGTH		32
+#define LP5562_MAX_LEDS			4
+
+/* ENABLE Register 00h */
+#define LP5562_REG_ENABLE		0x00
+#define LP5562_EXEC_ENG1_M		0x30
+#define LP5562_EXEC_ENG2_M		0x0C
+#define LP5562_EXEC_ENG3_M		0x03
+#define LP5562_EXEC_M			0x3F
+#define LP5562_MASTER_ENABLE		0x40	/* Chip master enable */
+#define LP5562_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
+#define LP5562_EXEC_RUN			0x2A
+#define LP5562_ENABLE_DEFAULT	\
+	(LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
+#define LP5562_ENABLE_RUN_PROGRAM	\
+	(LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
+
+/* OPMODE Register 01h */
+#define LP5562_REG_OP_MODE		0x01
+#define LP5562_MODE_ENG1_M		0x30
+#define LP5562_MODE_ENG2_M		0x0C
+#define LP5562_MODE_ENG3_M		0x03
+#define LP5562_LOAD_ENG1		0x10
+#define LP5562_LOAD_ENG2		0x04
+#define LP5562_LOAD_ENG3		0x01
+#define LP5562_RUN_ENG1			0x20
+#define LP5562_RUN_ENG2			0x08
+#define LP5562_RUN_ENG3			0x02
+#define LP5562_ENG1_IS_LOADING(mode)	\
+	((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
+#define LP5562_ENG2_IS_LOADING(mode)	\
+	((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
+#define LP5562_ENG3_IS_LOADING(mode)	\
+	((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
+
+/* BRIGHTNESS Registers */
+#define LP5562_REG_R_PWM		0x04
+#define LP5562_REG_G_PWM		0x03
+#define LP5562_REG_B_PWM		0x02
+#define LP5562_REG_W_PWM		0x0E
+
+/* CURRENT Registers */
+#define LP5562_REG_R_CURRENT		0x07
+#define LP5562_REG_G_CURRENT		0x06
+#define LP5562_REG_B_CURRENT		0x05
+#define LP5562_REG_W_CURRENT		0x0F
+
+/* CONFIG Register 08h */
+#define LP5562_REG_CONFIG		0x08
+#define LP5562_PWM_HF			0x40
+#define LP5562_PWRSAVE_EN		0x20
+#define LP5562_CLK_INT			0x01	/* Internal clock */
+#define LP5562_DEFAULT_CFG		(LP5562_PWM_HF | LP5562_PWRSAVE_EN)
+
+/* RESET Register 0Dh */
+#define LP5562_REG_RESET		0x0D
+#define LP5562_RESET			0xFF
+
+/* PROGRAM ENGINE Registers */
+#define LP5562_REG_PROG_MEM_ENG1	0x10
+#define LP5562_REG_PROG_MEM_ENG2	0x30
+#define LP5562_REG_PROG_MEM_ENG3	0x50
+
+/* LEDMAP Register 70h */
+#define LP5562_REG_ENG_SEL		0x70
+#define LP5562_ENG_SEL_PWM		0
+#define LP5562_ENG_FOR_RGB_M		0x3F
+#define LP5562_ENG_SEL_RGB		0x1B	/* R:ENG1, G:ENG2, B:ENG3 */
+#define LP5562_ENG_FOR_W_M		0xC0
+#define LP5562_ENG1_FOR_W		0x40	/* W:ENG1 */
+#define LP5562_ENG2_FOR_W		0x80	/* W:ENG2 */
+#define LP5562_ENG3_FOR_W		0xC0	/* W:ENG3 */
+
+/* Program Commands */
+#define LP5562_CMD_DISABLE		0x00
+#define LP5562_CMD_LOAD			0x15
+#define LP5562_CMD_RUN			0x2A
+#define LP5562_CMD_DIRECT		0x3F
+#define LP5562_PATTERN_OFF		0
+
+static inline void lp5562_wait_opmode_done(void)
+{
+	/* operation mode change needs to be longer than 153 us */
+	usleep_range(200, 300);
+}
+
+static inline void lp5562_wait_enable_done(void)
+{
+	/* it takes more 488 us to update ENABLE register */
+	usleep_range(500, 600);
+}
+
+static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+	u8 addr[] = {
+		LP5562_REG_R_CURRENT,
+		LP5562_REG_G_CURRENT,
+		LP5562_REG_B_CURRENT,
+		LP5562_REG_W_CURRENT,
+	};
+
+	led->led_current = led_current;
+	lp55xx_write(led->chip, addr[led->chan_nr], led_current);
+}
+
+static void lp5562_load_engine(struct lp55xx_chip *chip)
+{
+	enum lp55xx_engine_index idx = chip->engine_idx;
+	u8 mask[] = {
+		[LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
+		[LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
+		[LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
+	};
+
+	u8 val[] = {
+		[LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
+		[LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
+		[LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
+	};
+
+	lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
+
+	lp5562_wait_opmode_done();
+}
+
+static void lp5562_stop_engine(struct lp55xx_chip *chip)
+{
+	lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
+	lp5562_wait_opmode_done();
+}
+
+static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
+{
+	int ret;
+	u8 mode;
+	u8 exec;
+
+	/* stop engine */
+	if (!start) {
+		lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
+		lp5562_wait_enable_done();
+		lp5562_stop_engine(chip);
+		lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+		lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+		lp5562_wait_opmode_done();
+		return;
+	}
+
+	/*
+	 * To run the engine,
+	 * operation mode and enable register should updated at the same time
+	 */
+
+	ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
+	if (ret)
+		return;
+
+	ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
+	if (ret)
+		return;
+
+	/* change operation mode to RUN only when each engine is loading */
+	if (LP5562_ENG1_IS_LOADING(mode)) {
+		mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
+		exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
+	}
+
+	if (LP5562_ENG2_IS_LOADING(mode)) {
+		mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
+		exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
+	}
+
+	if (LP5562_ENG3_IS_LOADING(mode)) {
+		mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
+		exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
+	}
+
+	lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
+	lp5562_wait_opmode_done();
+
+	lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
+	lp5562_wait_enable_done();
+}
+
+static int lp5562_update_firmware(struct lp55xx_chip *chip,
+					const u8 *data, size_t size)
+{
+	enum lp55xx_engine_index idx = chip->engine_idx;
+	u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
+	u8 addr[] = {
+		[LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
+		[LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
+		[LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
+	};
+	unsigned cmd;
+	char c[3];
+	int program_size;
+	int nrchars;
+	int offset = 0;
+	int ret;
+	int i;
+
+	/* clear program memory before updating */
+	for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
+		lp55xx_write(chip, addr[idx] + i, 0);
+
+	i = 0;
+	while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+		if (ret != 1)
+			goto err;
+
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto err;
+
+		pattern[i] = (u8)cmd;
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto err;
+
+	program_size = i;
+	for (i = 0; i < program_size; i++)
+		lp55xx_write(chip, addr[idx] + i, pattern[i]);
+
+	return 0;
+
+err:
+	dev_err(&chip->cl->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
+{
+	const struct firmware *fw = chip->fw;
+
+	if (fw->size > LP5562_PROGRAM_LENGTH) {
+		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+			fw->size);
+		return;
+	}
+
+	/*
+	 * Program momery sequence
+	 *  1) set engine mode to "LOAD"
+	 *  2) write firmware data into program memory
+	 */
+
+	lp5562_load_engine(chip);
+	lp5562_update_firmware(chip, fw->data, fw->size);
+}
+
+static int lp5562_post_init_device(struct lp55xx_chip *chip)
+{
+	int ret;
+	u8 cfg = LP5562_DEFAULT_CFG;
+
+	/* Set all PWMs to direct control mode */
+	ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
+	if (ret)
+		return ret;
+
+	lp5562_wait_opmode_done();
+
+	/* Update configuration for the clock setting */
+	if (!lp55xx_is_extclk_used(chip))
+		cfg |= LP5562_CLK_INT;
+
+	ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
+	if (ret)
+		return ret;
+
+	/* Initialize all channels PWM to zero -> leds off */
+	lp55xx_write(chip, LP5562_REG_R_PWM, 0);
+	lp55xx_write(chip, LP5562_REG_G_PWM, 0);
+	lp55xx_write(chip, LP5562_REG_B_PWM, 0);
+	lp55xx_write(chip, LP5562_REG_W_PWM, 0);
+
+	/* Set LED map as register PWM by default */
+	lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
+
+	return 0;
+}
+
+static void lp5562_led_brightness_work(struct work_struct *work)
+{
+	struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+					      brightness_work);
+	struct lp55xx_chip *chip = led->chip;
+	u8 addr[] = {
+		LP5562_REG_R_PWM,
+		LP5562_REG_G_PWM,
+		LP5562_REG_B_PWM,
+		LP5562_REG_W_PWM,
+	};
+
+	mutex_lock(&chip->lock);
+	lp55xx_write(chip, addr[led->chan_nr], led->brightness);
+	mutex_unlock(&chip->lock);
+}
+
+static void lp5562_write_program_memory(struct lp55xx_chip *chip,
+					u8 base, const u8 *rgb, int size)
+{
+	int i;
+
+	if (!rgb || size <= 0)
+		return;
+
+	for (i = 0; i < size; i++)
+		lp55xx_write(chip, base + i, *(rgb + i));
+
+	lp55xx_write(chip, base + i, 0);
+	lp55xx_write(chip, base + i + 1, 0);
+}
+
+/* check the size of program count */
+static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
+{
+	return (ptn->size_r >= LP5562_PROGRAM_LENGTH ||
+		ptn->size_g >= LP5562_PROGRAM_LENGTH ||
+		ptn->size_b >= LP5562_PROGRAM_LENGTH);
+}
+
+static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
+{
+	struct lp55xx_predef_pattern *ptn;
+	int i;
+
+	if (mode == LP5562_PATTERN_OFF) {
+		lp5562_run_engine(chip, false);
+		return 0;
+	}
+
+	ptn = chip->pdata->patterns + (mode - 1);
+	if (!ptn || _is_pc_overflow(ptn)) {
+		dev_err(&chip->cl->dev, "invalid pattern data\n");
+		return -EINVAL;
+	}
+
+	lp5562_stop_engine(chip);
+
+	/* Set LED map as RGB */
+	lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
+
+	/* Load engines */
+	for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
+		chip->engine_idx = i;
+		lp5562_load_engine(chip);
+	}
+
+	/* Clear program registers */
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
+	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
+
+	/* Program engines */
+	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
+				ptn->r, ptn->size_r);
+	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
+				ptn->g, ptn->size_g);
+	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
+				ptn->b, ptn->size_b);
+
+	/* Run engines */
+	lp5562_run_engine(chip, true);
+
+	return 0;
+}
+
+static ssize_t lp5562_store_pattern(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
+	int num_patterns = chip->pdata->num_patterns;
+	unsigned long mode;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &mode);
+	if (ret)
+		return ret;
+
+	if (mode > num_patterns || !ptn)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5562_run_predef_led_pattern(chip, mode);
+	mutex_unlock(&chip->lock);
+
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static ssize_t lp5562_store_engine_mux(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	u8 mask;
+	u8 val;
+
+	/* LED map
+	 * R ... Engine 1 (fixed)
+	 * G ... Engine 2 (fixed)
+	 * B ... Engine 3 (fixed)
+	 * W ... Engine 1 or 2 or 3
+	 */
+
+	if (sysfs_streq(buf, "RGB")) {
+		mask = LP5562_ENG_FOR_RGB_M;
+		val = LP5562_ENG_SEL_RGB;
+	} else if (sysfs_streq(buf, "W")) {
+		enum lp55xx_engine_index idx = chip->engine_idx;
+
+		mask = LP5562_ENG_FOR_W_M;
+		switch (idx) {
+		case LP55XX_ENGINE_1:
+			val = LP5562_ENG1_FOR_W;
+			break;
+		case LP55XX_ENGINE_2:
+			val = LP5562_ENG2_FOR_W;
+			break;
+		case LP55XX_ENGINE_3:
+			val = LP5562_ENG3_FOR_W;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+	} else {
+		dev_err(dev, "choose RGB or W\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&chip->lock);
+	lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
+	mutex_unlock(&chip->lock);
+
+	return len;
+}
+
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, lp5562_store_pattern);
+static DEVICE_ATTR(engine_mux, S_IWUSR, NULL, lp5562_store_engine_mux);
+
+static struct attribute *lp5562_attributes[] = {
+	&dev_attr_led_pattern.attr,
+	&dev_attr_engine_mux.attr,
+	NULL,
+};
+
+static const struct attribute_group lp5562_group = {
+	.attrs = lp5562_attributes,
+};
+
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5562_cfg = {
+	.max_channel  = LP5562_MAX_LEDS,
+	.reset = {
+		.addr = LP5562_REG_RESET,
+		.val  = LP5562_RESET,
+	},
+	.enable = {
+		.addr = LP5562_REG_ENABLE,
+		.val  = LP5562_ENABLE_DEFAULT,
+	},
+	.post_init_device   = lp5562_post_init_device,
+	.set_led_current    = lp5562_set_led_current,
+	.brightness_work_fn = lp5562_led_brightness_work,
+	.run_engine         = lp5562_run_engine,
+	.firmware_cb        = lp5562_firmware_loaded,
+	.dev_attr_group     = &lp5562_group,
+};
+
+static int lp5562_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct lp55xx_chip *chip;
+	struct lp55xx_led *led;
+	struct lp55xx_platform_data *pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	led = devm_kzalloc(&client->dev,
+			sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	chip->cl = client;
+	chip->pdata = pdata;
+	chip->cfg = &lp5562_cfg;
+
+	mutex_init(&chip->lock);
+
+	i2c_set_clientdata(client, led);
+
+	ret = lp55xx_init_device(chip);
+	if (ret)
+		goto err_init;
+
+	ret = lp55xx_register_leds(led, chip);
+	if (ret)
+		goto err_register_leds;
+
+	ret = lp55xx_register_sysfs(chip);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto err_register_sysfs;
+	}
+
+	return 0;
+
+err_register_sysfs:
+	lp55xx_unregister_leds(led, chip);
+err_register_leds:
+	lp55xx_deinit_device(chip);
+err_init:
+	return ret;
+}
+
+static int lp5562_remove(struct i2c_client *client)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(client);
+	struct lp55xx_chip *chip = led->chip;
+
+	lp5562_stop_engine(chip);
+
+	lp55xx_unregister_sysfs(chip);
+	lp55xx_unregister_leds(led, chip);
+	lp55xx_deinit_device(chip);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp5562_id[] = {
+	{ "lp5562", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp5562_id);
+
+static struct i2c_driver lp5562_driver = {
+	.driver = {
+		.name	= "lp5562",
+	},
+	.probe		= lp5562_probe,
+	.remove		= lp5562_remove,
+	.id_table	= lp5562_id,
+};
+
+module_i2c_driver(lp5562_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index d9eb84157423..ba34199dc3d9 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -1,5 +1,5 @@
 /*
- * LP5521/LP5523/LP55231 Common Driver
+ * LP5521/LP5523/LP55231/LP5562 Common Driver
  *
  * Copyright 2012 Texas Instruments
  *
@@ -12,6 +12,7 @@
  * Derived from leds-lp5521.c, leds-lp5523.c
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
@@ -21,6 +22,9 @@
 
 #include "leds-lp55xx-common.h"
 
+/* External clock rate */
+#define LP55XX_CLK_32K			32768
+
 static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev)
 {
 	return container_of(cdev, struct lp55xx_led, cdev);
@@ -80,7 +84,7 @@ static ssize_t lp55xx_show_current(struct device *dev,
 {
 	struct lp55xx_led *led = dev_to_lp55xx_led(dev);
 
-	return sprintf(buf, "%d\n", led->led_current);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current);
 }
 
 static ssize_t lp55xx_store_current(struct device *dev,
@@ -113,7 +117,7 @@ static ssize_t lp55xx_show_max_current(struct device *dev,
 {
 	struct lp55xx_led *led = dev_to_lp55xx_led(dev);
 
-	return sprintf(buf, "%d\n", led->max_current);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current);
 }
 
 static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
@@ -357,6 +361,35 @@ int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val)
 }
 EXPORT_SYMBOL_GPL(lp55xx_update_bits);
 
+bool lp55xx_is_extclk_used(struct lp55xx_chip *chip)
+{
+	struct clk *clk;
+	int err;
+
+	clk = devm_clk_get(&chip->cl->dev, "32k_clk");
+	if (IS_ERR(clk))
+		goto use_internal_clk;
+
+	err = clk_prepare_enable(clk);
+	if (err)
+		goto use_internal_clk;
+
+	if (clk_get_rate(clk) != LP55XX_CLK_32K) {
+		clk_disable_unprepare(clk);
+		goto use_internal_clk;
+	}
+
+	dev_info(&chip->cl->dev, "%dHz external clock used\n",	LP55XX_CLK_32K);
+
+	chip->clk = clk;
+	return true;
+
+use_internal_clk:
+	dev_info(&chip->cl->dev, "internal clock used\n");
+	return false;
+}
+EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used);
+
 int lp55xx_init_device(struct lp55xx_chip *chip)
 {
 	struct lp55xx_platform_data *pdata;
@@ -421,6 +454,9 @@ void lp55xx_deinit_device(struct lp55xx_chip *chip)
 {
 	struct lp55xx_platform_data *pdata = chip->pdata;
 
+	if (chip->clk)
+		clk_disable_unprepare(chip->clk);
+
 	if (pdata->enable)
 		pdata->enable(0);
 
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
index ece4761a1302..fa6a078bf547 100644
--- a/drivers/leds/leds-lp55xx-common.h
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -83,6 +83,7 @@ struct lp55xx_device_config {
  */
 struct lp55xx_chip {
 	struct i2c_client *cl;
+	struct clk *clk;
 	struct lp55xx_platform_data *pdata;
 	struct mutex lock;	/* lock for user-space interface */
 	int num_leds;
@@ -117,6 +118,9 @@ extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val);
 extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg,
 			u8 mask, u8 val);
 
+/* external clock detection */
+extern bool lp55xx_is_extclk_used(struct lp55xx_chip *chip);
+
 /* common device init/deinit functions */
 extern int lp55xx_init_device(struct lp55xx_chip *chip);
 extern void lp55xx_deinit_device(struct lp55xx_chip *chip);
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index c9b9e1fec587..ca48a7d5502d 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -106,8 +106,9 @@ static int create_lt3593_led(const struct gpio_led *template,
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
-	ret = devm_gpio_request_one(parent, template->gpio,
-				    GPIOF_DIR_OUT | state, template->name);
+	ret = devm_gpio_request_one(parent, template->gpio, state ?
+				    GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+				    template->name);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index d978171c25b4..70137b1eecf5 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -193,7 +193,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	enum ns2_led_modes mode;
 
 	ret = devm_gpio_request_one(&pdev->dev, template->cmd,
-			GPIOF_DIR_OUT | gpio_get_value(template->cmd),
+			gpio_get_value(template->cmd) ?
+			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
 			template->name);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
@@ -202,7 +203,8 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	}
 
 	ret = devm_gpio_request_one(&pdev->dev, template->slow,
-			GPIOF_DIR_OUT | gpio_get_value(template->slow),
+			gpio_get_value(template->slow) ?
+			GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
 			template->name);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
@@ -306,10 +308,21 @@ static const struct of_device_id of_ns2_leds_match[] = {
 };
 #endif /* CONFIG_OF_GPIO */
 
+struct ns2_led_priv {
+	int num_leds;
+	struct ns2_led_data leds_data[];
+};
+
+static inline int sizeof_ns2_led_priv(int num_leds)
+{
+	return sizeof(struct ns2_led_priv) +
+		      (sizeof(struct ns2_led_data) * num_leds);
+}
+
 static int ns2_led_probe(struct platform_device *pdev)
 {
 	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
-	struct ns2_led_data *leds_data;
+	struct ns2_led_priv *priv;
 	int i;
 	int ret;
 
@@ -330,21 +343,23 @@ static int ns2_led_probe(struct platform_device *pdev)
 		return -EINVAL;
 #endif /* CONFIG_OF_GPIO */
 
-	leds_data = devm_kzalloc(&pdev->dev, sizeof(struct ns2_led_data) *
-				 pdata->num_leds, GFP_KERNEL);
-	if (!leds_data)
+	priv = devm_kzalloc(&pdev->dev,
+			    sizeof_ns2_led_priv(pdata->num_leds), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
+	priv->num_leds = pdata->num_leds;
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		ret = create_ns2_led(pdev, &leds_data[i], &pdata->leds[i]);
+	for (i = 0; i < priv->num_leds; i++) {
+		ret = create_ns2_led(pdev, &priv->leds_data[i],
+				     &pdata->leds[i]);
 		if (ret < 0) {
 			for (i = i - 1; i >= 0; i--)
-				delete_ns2_led(&leds_data[i]);
+				delete_ns2_led(&priv->leds_data[i]);
 			return ret;
 		}
 	}
 
-	platform_set_drvdata(pdev, leds_data);
+	platform_set_drvdata(pdev, priv);
 
 	return 0;
 }
@@ -352,13 +367,12 @@ static int ns2_led_probe(struct platform_device *pdev)
 static int ns2_led_remove(struct platform_device *pdev)
 {
 	int i;
-	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
-	struct ns2_led_data *leds_data;
+	struct ns2_led_priv *priv;
 
-	leds_data = platform_get_drvdata(pdev);
+	priv = platform_get_drvdata(pdev);
 
-	for (i = 0; i < pdata->num_leds; i++)
-		delete_ns2_led(&leds_data[i]);
+	for (i = 0; i < priv->num_leds; i++)
+		delete_ns2_led(&priv->leds_data[i]);
 
 	platform_set_drvdata(pdev, NULL);
 
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index a1ea5f6a8d39..faf52c005e8c 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -23,12 +23,16 @@
 #include <linux/pwm.h>
 #include <linux/leds_pwm.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 
 struct led_pwm_data {
 	struct led_classdev	cdev;
 	struct pwm_device	*pwm;
+	struct work_struct	work;
 	unsigned int		active_low;
 	unsigned int		period;
+	int			duty;
+	bool			can_sleep;
 };
 
 struct led_pwm_priv {
@@ -36,6 +40,26 @@ struct led_pwm_priv {
 	struct led_pwm_data leds[0];
 };
 
+static void __led_pwm_set(struct led_pwm_data *led_dat)
+{
+	int new_duty = led_dat->duty;
+
+	pwm_config(led_dat->pwm, new_duty, led_dat->period);
+
+	if (new_duty == 0)
+		pwm_disable(led_dat->pwm);
+	else
+		pwm_enable(led_dat->pwm);
+}
+
+static void led_pwm_work(struct work_struct *work)
+{
+	struct led_pwm_data *led_dat =
+		container_of(work, struct led_pwm_data, work);
+
+	__led_pwm_set(led_dat);
+}
+
 static void led_pwm_set(struct led_classdev *led_cdev,
 	enum led_brightness brightness)
 {
@@ -44,13 +68,12 @@ static void led_pwm_set(struct led_classdev *led_cdev,
 	unsigned int max = led_dat->cdev.max_brightness;
 	unsigned int period =  led_dat->period;
 
-	if (brightness == 0) {
-		pwm_config(led_dat->pwm, 0, period);
-		pwm_disable(led_dat->pwm);
-	} else {
-		pwm_config(led_dat->pwm, brightness * period / max, period);
-		pwm_enable(led_dat->pwm);
-	}
+	led_dat->duty = brightness * period / max;
+
+	if (led_dat->can_sleep)
+		schedule_work(&led_dat->work);
+	else
+		__led_pwm_set(led_dat);
 }
 
 static inline size_t sizeof_pwm_leds_priv(int num_leds)
@@ -100,6 +123,10 @@ static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev)
 		led_dat->cdev.brightness = LED_OFF;
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
+		led_dat->can_sleep = pwm_can_sleep(led_dat->pwm);
+		if (led_dat->can_sleep)
+			INIT_WORK(&led_dat->work, led_pwm_work);
+
 		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to register for %s\n",
@@ -153,6 +180,10 @@ static int led_pwm_probe(struct platform_device *pdev)
 			led_dat->cdev.max_brightness = cur_led->max_brightness;
 			led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
+			led_dat->can_sleep = pwm_can_sleep(led_dat->pwm);
+			if (led_dat->can_sleep)
+				INIT_WORK(&led_dat->work, led_pwm_work);
+
 			ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 			if (ret < 0)
 				goto err;
@@ -180,8 +211,11 @@ static int led_pwm_remove(struct platform_device *pdev)
 	struct led_pwm_priv *priv = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < priv->num_leds; i++)
+	for (i = 0; i < priv->num_leds; i++) {
 		led_classdev_unregister(&priv->leds[i].cdev);
+		if (priv->leds[i].can_sleep)
+			cancel_work_sync(&priv->leds[i].work);
+	}
 
 	return 0;
 }
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
index d3c2b7e68fbc..9483f1c1078d 100644
--- a/drivers/leds/leds-renesas-tpu.c
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -205,7 +205,8 @@ static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state,
 		gpio_free(cfg->pin_gpio_fn);
 
 	if (new_state == R_TPU_PIN_GPIO)
-		gpio_request_one(cfg->pin_gpio, GPIOF_DIR_OUT | !!brightness,
+		gpio_request_one(cfg->pin_gpio, !!brightness ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
 				cfg->name);
 
 	if (new_state == R_TPU_PIN_GPIO_FN)
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index 070ba0741b21..98fe021ba276 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -85,6 +85,7 @@
 #include <linux/gpio.h>
 #include <linux/workqueue.h>
 #include <linux/leds-tca6507.h>
+#include <linux/of.h>
 
 /* LED select registers determine the source that drives LED outputs */
 #define TCA6507_LS_LED_OFF	0x0	/* Output HI-Z (off) */
@@ -724,7 +725,6 @@ tca6507_led_dt_init(struct i2c_client *client)
 	return ERR_PTR(-ENODEV);
 }
 
-#define of_tca6507_leds_match NULL
 #endif
 
 static int tca6507_probe(struct i2c_client *client,
@@ -813,7 +813,7 @@ static struct i2c_driver tca6507_driver = {
 	.driver   = {
 		.name    = "leds-tca6507",
 		.owner   = THIS_MODULE,
-		.of_match_table = of_tca6507_leds_match,
+		.of_match_table = of_match_ptr(of_tca6507_leds_match),
 	},
 	.probe    = tca6507_probe,
 	.remove   = tca6507_remove,
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index ed15157c8f6c..8a181d56602d 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -129,7 +129,10 @@ static void wm8350_led_disable(struct wm8350_led *led)
 	ret = regulator_disable(led->isink);
 	if (ret != 0) {
 		dev_err(led->cdev.dev, "Failed to disable ISINK: %d\n", ret);
-		regulator_enable(led->dcdc);
+		ret = regulator_enable(led->dcdc);
+		if (ret != 0)
+			dev_err(led->cdev.dev, "Failed to reenable DCDC: %d\n",
+				ret);
 		return;
 	}
 
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
new file mode 100644
index 000000000000..49794b47b51c
--- /dev/null
+++ b/drivers/leds/trigger/Kconfig
@@ -0,0 +1,111 @@
+menuconfig LEDS_TRIGGERS
+	bool "LED Trigger support"
+	depends on LEDS_CLASS
+	help
+	  This option enables trigger support for the leds class.
+	  These triggers allow kernel events to drive the LEDs and can
+	  be configured via sysfs. If unsure, say Y.
+
+if LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TIMER
+	tristate "LED Timer Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by a programmable timer
+	  via sysfs. Some LED hardware can be programmed to start
+	  blinking the LED without any further software interaction.
+	  For more details read Documentation/leds/leds-class.txt.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_ONESHOT
+	tristate "LED One-shot Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to blink in one-shot pulses with parameters
+	  controlled via sysfs.  It's useful to notify the user on
+	  sporadic events, when there are no clear begin and end trap points,
+	  or on dense events, where this blinks the LED at constant rate if
+	  rearmed continuously.
+
+	  It also shows how to use the led_blink_set_oneshot() function.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_IDE_DISK
+	bool "LED IDE Disk Trigger"
+	depends on IDE_GD_ATA
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by IDE disk activity.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_HEARTBEAT
+	tristate "LED Heartbeat Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by a CPU load average.
+	  The flash frequency is a hyperbolic function of the 1-minute
+	  load average.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_BACKLIGHT
+	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled as a backlight device: they
+	  turn off and on when the display is blanked and unblanked.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_CPU
+	bool "LED CPU Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by active CPUs. This shows
+	  the active CPUs across an array of LEDs so you can see which
+	  CPUs are active on the system at any given moment.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_GPIO
+	tristate "LED GPIO Trigger"
+	depends on LEDS_TRIGGERS
+	depends on GPIOLIB
+	help
+	  This allows LEDs to be controlled by gpio events. It's good
+	  when using gpios as switches and triggering the needed LEDs
+	  from there. One use case is n810's keypad LEDs that could
+	  be triggered by this trigger when user slides up to show
+	  keypad.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_DEFAULT_ON
+	tristate "LED Default ON Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be initialised in the ON state.
+	  If unsure, say Y.
+
+comment "iptables trigger is under Netfilter config (LED target)"
+	depends on LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TRANSIENT
+	tristate "LED Transient Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows one time activation of a transient state on
+	  GPIO/PWM based hardware.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_CAMERA
+	tristate "LED Camera Flash/Torch Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled as a camera flash/torch device.
+	  This enables direct flash/torch on/off by the driver, kernel space.
+	  If unsure, say Y.
+
+endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
new file mode 100644
index 000000000000..1abf48dacf7e
--- /dev/null
+++ b/drivers/leds/trigger/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
+obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
diff --git a/drivers/leds/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
index 027a2b15d7d8..3c9c88a07eb8 100644
--- a/drivers/leds/ledtrig-backlight.c
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/fb.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define BLANK		1
 #define UNBLANK		0
diff --git a/drivers/leds/trigger/ledtrig-camera.c b/drivers/leds/trigger/ledtrig-camera.c
new file mode 100644
index 000000000000..9bd73a8bad5c
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-camera.c
@@ -0,0 +1,57 @@
+/*
+ * Camera Flash and Torch On/Off Trigger
+ *
+ * based on ledtrig-ide-disk.c
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+DEFINE_LED_TRIGGER(ledtrig_flash);
+DEFINE_LED_TRIGGER(ledtrig_torch);
+
+void ledtrig_flash_ctrl(bool on)
+{
+	enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+	led_trigger_event(ledtrig_flash, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_flash_ctrl);
+
+void ledtrig_torch_ctrl(bool on)
+{
+	enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+	led_trigger_event(ledtrig_torch, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_torch_ctrl);
+
+static int __init ledtrig_camera_init(void)
+{
+	led_trigger_register_simple("flash", &ledtrig_flash);
+	led_trigger_register_simple("torch", &ledtrig_torch);
+	return 0;
+}
+module_init(ledtrig_camera_init);
+
+static void __exit ledtrig_camera_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_torch);
+	led_trigger_unregister_simple(ledtrig_flash);
+}
+module_exit(ledtrig_camera_exit);
+
+MODULE_DESCRIPTION("LED Trigger for Camera Flash/Torch Control");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c
index 4239b3955ff0..118335eccc56 100644
--- a/drivers/leds/ledtrig-cpu.c
+++ b/drivers/leds/trigger/ledtrig-cpu.c
@@ -26,7 +26,7 @@
 #include <linux/percpu.h>
 #include <linux/syscore_ops.h>
 #include <linux/rwsem.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define MAX_NAME_LEN	8
 
diff --git a/drivers/leds/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
index eac1f1b1adac..81a91be8e18d 100644
--- a/drivers/leds/ledtrig-default-on.c
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 static void defon_trig_activate(struct led_classdev *led_cdev)
 {
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index 72e3ebfc281f..35812e3a37f2 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -17,7 +17,7 @@
 #include <linux/workqueue.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
-#include "leds.h"
+#include "../leds.h"
 
 struct gpio_trig_data {
 	struct led_classdev *led;
diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
index 1edc7463ce83..5c8464a33172 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -19,7 +19,7 @@
 #include <linux/sched.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
-#include "leds.h"
+#include "../leds.h"
 
 static int panic_heartbeats;
 
diff --git a/drivers/leds/ledtrig-ide-disk.c b/drivers/leds/trigger/ledtrig-ide-disk.c
index 2cd7c0cf5924..2cd7c0cf5924 100644
--- a/drivers/leds/ledtrig-ide-disk.c
+++ b/drivers/leds/trigger/ledtrig-ide-disk.c
diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
index 2c029aa5c4f1..cb4c7466692a 100644
--- a/drivers/leds/ledtrig-oneshot.c
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -18,7 +18,7 @@
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define DEFAULT_DELAY 100
 
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
index f774d0592204..8d09327b5719 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -17,7 +17,6 @@
 #include <linux/device.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include "leds.h"
 
 static ssize_t led_delay_on_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
diff --git a/drivers/leds/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
index 398f1042c43e..e5abc00bb00c 100644
--- a/drivers/leds/ledtrig-transient.c
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/timer.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 struct transient_trig_data {
 	int activate;
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 0d9b5eed714e..0287ab296689 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -142,6 +142,10 @@ extern void led_set_brightness(struct led_classdev *led_cdev,
 /*
  * LED Triggers
  */
+/* Registration functions for simple triggers */
+#define DEFINE_LED_TRIGGER(x)		static struct led_trigger *x;
+#define DEFINE_LED_TRIGGER_GLOBAL(x)	struct led_trigger *x;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 
 #define TRIG_NAME_MAX 50
@@ -164,9 +168,6 @@ struct led_trigger {
 extern int led_trigger_register(struct led_trigger *trigger);
 extern void led_trigger_unregister(struct led_trigger *trigger);
 
-/* Registration functions for simple triggers */
-#define DEFINE_LED_TRIGGER(x)		static struct led_trigger *x;
-#define DEFINE_LED_TRIGGER_GLOBAL(x)	struct led_trigger *x;
 extern void led_trigger_register_simple(const char *name,
 				struct led_trigger **trigger);
 extern void led_trigger_unregister_simple(struct led_trigger *trigger);
@@ -199,20 +200,30 @@ extern void led_trigger_rename_static(const char *name,
 
 #else
 
-/* Triggers aren't active - null macros */
-#define DEFINE_LED_TRIGGER(x)
-#define DEFINE_LED_TRIGGER_GLOBAL(x)
-#define led_trigger_register_simple(x, y) do {} while(0)
-#define led_trigger_unregister_simple(x) do {} while(0)
-#define led_trigger_event(x, y) do {} while(0)
+/* Trigger has no members */
+struct led_trigger {};
 
-#endif
+/* Trigger inline empty functions */
+static inline void led_trigger_register_simple(const char *name,
+					struct led_trigger **trigger) {}
+static inline void led_trigger_unregister_simple(struct led_trigger *trigger) {}
+static inline void led_trigger_event(struct led_trigger *trigger,
+				enum led_brightness event) {}
+#endif /* CONFIG_LEDS_TRIGGERS */
 
 /* Trigger specific functions */
 #ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
 extern void ledtrig_ide_activity(void);
 #else
-#define ledtrig_ide_activity() do {} while(0)
+static inline void ledtrig_ide_activity(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE)
+extern void ledtrig_flash_ctrl(bool on);
+extern void ledtrig_torch_ctrl(bool on);
+#else
+static inline void ledtrig_flash_ctrl(bool on) {}
+static inline void ledtrig_torch_ctrl(bool on) {}
 #endif
 
 /*
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 8873e8349597..e326ae2882a0 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -342,9 +342,7 @@ struct mmc_host {
 
 	mmc_pm_flag_t		pm_flags;	/* requested pm features */
 
-#ifdef CONFIG_LEDS_TRIGGERS
 	struct led_trigger	*led;		/* activity led */
-#endif
 
 #ifdef CONFIG_REGULATOR
 	bool			regulator_enabled; /* regulator state */
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 1509570d5a3f..202e290faea8 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -20,18 +20,6 @@
 #define LP55XX_CLOCK_INT	1
 #define LP55XX_CLOCK_EXT	2
 
-/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */
-#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
-#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
-#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
-#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
-#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
-#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
-#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
-#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
-#define LP5521_CLK_INT			1	/* Internal clock */
-#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
-
 struct lp55xx_led_config {
 	const char *name;
 	u8 chan_nr;
@@ -40,9 +28,9 @@ struct lp55xx_led_config {
 };
 
 struct lp55xx_predef_pattern {
-	u8 *r;
-	u8 *g;
-	u8 *b;
+	const u8 *r;
+	const u8 *g;
+	const u8 *b;
 	u8 size_r;
 	u8 size_g;
 	u8 size_b;
@@ -79,9 +67,6 @@ struct lp55xx_platform_data {
 	/* Predefined pattern data */
 	struct lp55xx_predef_pattern *patterns;
 	unsigned int num_patterns;
-
-	/* _CONFIG register */
-	u8 update_config;
 };
 
 #endif /* _LEDS_LP55XX_H */